Crosby Shackles

CROSBY FORGED SHACKLES Screw Pin Anchor Shackles

G-209

S-209

Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 2, except for those provisions required of the contractor.

Working Nomin ominal al Load oad Stoc tock Size Limit (in.) (t)* G-209 3/16 1/3 1018357 1/4 1/2 1018375 5/16 3/4 1018393 3/8 1 1018419 7/16 7/16 1-1/ 1-1/2 2 1018 101843 437 7 1/2 1/2 2 1018 10184 455 5/8 5/8 3-1/ 3-1/4 4 1018 101847 473 3 3/4 4-3/4 1018491 7/8 6-1/2 6-1/2 101851 101 8516 6 1 8-1/2 8-1/2 101853 101 8534 4 1-1/8 1-1/8 9-1/2 9-1/2 1018552 10185 52 1-1/4 1-1/4 12 101 101857 8570 0 1-3/8 1-3/8 13-1/2 13-1/2 10185 1018598 98 1-1/2 1-1/2 17 101861 101 8614 4 1-3/4 1-3/4 25 101863 101 8632 2 2 35 1018650 10186 50 2-1/2 2-1/2 55 101867 101 8678 8

No. S-209 — 1018384 1018400 1018428 1018 101844 446 6 1018 018464 464 1018 101848 482 2 1018507 101852 101 8525 5 101854 101 8543 3 1018561 1018 561 101858 101 8589 9 1018605 1018 605 101862 101 8623 3 101864 101 8641 1 1018 101866 669 9 101868 101 8687 7

• Shackles are Quenched and Tempered Tempered and can meet DNV impact impact requirements of 42 joules at -20C. • Working Load Limit permanently permanently shown on every shackle. • Forged - Quenched and Tempered, with alloy pin. • Capacities 1/3 thru 55 metric tons. • Look for the Red Pin¨. Pin¨. . .the mark of genuine Crosby quality. quality. • Shackles can be furnished furnished proof tested with certificates to designated designated standards, such as ABS, DNV, Lloyds, or other certification. Charged for proof testing and certification available when requested at the time of order. • Hot Dip galvanized or Self-Colored. • Fatigue Rated.

Weight ight Each (lbs.) .06 .10 .19 .31 .38 .38 .72 1.37 1.37 2.35 3.62 3.62 5.03 5.03 7.41 9.50 9.50 13.53 13.5 3 17.20 17.20 27.78 27.78 45.0 45.00 0 85.75 85.75

Dimen imens sions ions (in (in.) A .38 .47 .53 .66 .75 .75 .81 .81 1.06 1.06 1.25 1.44 1.44 1.69 1.69 1.81 2.03 2.03 2.25 2.38 2.38 2.88 2.88 3.25 3.25 4.13 4.13

B .25 .31 .38 .44 .50 .63 .63 .75 .75 .88 .8 1.00 1.00 1.13 1.13 1.25 1.38 1.38 1.50 1.63 1.63 2.00 2.00 2.25 2.25 2.75 2.75

C .88 1.13 1.22 1.44 1.6 1.69 9 1.88 1.88 2.3 2.38 8 2.81 3.31 3.31 3.75 3.75 4.25 4.69 4.69 5.25 5.25 5.75 5.75 7.00 7.75 7.7 5 10.50 10.50

D .19 .25 .31 .38 .44 .44 .50 .50 .63 .75 .88 1.00 1.00 1.16 1.29 1.29 1.42 1.54 1.54 1.84 1.84 2.08 2.08 2.71 2.71

E .60 .78 .84 .8 1.03 1.16 1.16 1. 1.31 1 1.6 .69 9 2.00 2.28 2.28 2.69 2.6 9 2.91 3.25 3.25 3.6 3.63 3 3.88 3.88 5.00 5.00 5.75 5.7 5 7.25 7.25

F .56 .61 .75 .91 1.06 1.06 1.19 1.19 1. 1.50 50 1.81 2.09 2.09 2.38 2.38 2.69 3.00 3.31 3.63 3.63 4.19 4.19 4.81 4.81 5.69 5.69

G .98 1.28 1.47 1.78 2.03 2.03 2.31 2.31 2.94 2.94 3.50 4.03 4.03 4.69 4.69 5.16 5.75 5.75 6.38 6.88 6.88 8.86 8.86 9.97 9.97 12.87 12.87

H 1.47 1.84 2.09 2.49 2.91 2.91 3.28 3.28 4.1 4.19 9 4 .9 .97 5.83 5.83 6.56 6.56 7.47 8.25 8.25 9.16 10.00 10.0 0 12.34 12.34 13.6 13.68 8 17.84 17.84

L .16 .19 .22 .2 .25 .31 .31 .38 .44 .44 .50 .50 .50 .56 .56 .63 .69 .69 .75 .81 .81 1.00 1.00 1.22 1.22 1.38 1.38

M 1.12 1.38 1.66 1. 2.03 2.38 2.38 2.69 .69 3.34 3.34 3.97 4.50 4.50 5.07 5.07 5.59 6.16 6.16 6.84 7.35 7.35 9.08 9.08 10.3 10.34 4 13.00 13.00

P .19 .25 .31 .3 . 38 38 .44 .44 .50 .50 .69 .69 .81 .97 1.06 1.06 1.25 1.38 1.38 1.50 1.62 1.62 2.25 2.25 2.40 2.40 3.13

NOTE: Maximum

Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see page 75.

74

BAIRSTOW LIFTING PRODUCTS CO. • 1-800-241-8990 • SHOP ONLINE www.bairstow.com