CROSBY S.doc

CROSBY S-1 INSPECTION REPORT SWIVEL BASIC LOCATION INSPECTION EQUIPMENT, (SEE CODE OR I.D. BELOW)

JAW

BY: DATE: SITE:

BODY

BOLT

BASIC INSPECTION CODE AA CRACKIN OR IMPACT DAMAE AB MODIFICATION SUCH AS WELDIN OR CUTTIN AC SUBSTITUTION OF PARTS AD RESTRICTED MOVEMENT OF THE SWIVEL AE E!CESSIVE WEAR AF E!CESSIVE CASE TO END FITTIN CLEARANCE A E!CESSIVE DEFORMATION

OTHER POINTS BODY OF DETERMINED CLEARANCE HOOK BY USER BASED ON APPLICATION

BASIC LUBRICATION REQUIREMENTS PRESSURE LUBRICATION FITTINS ARE PROVIDED ON ALL SI"ES. USE A LITHIUM BASED REASE OF MEDIUM CONSISTENCY.

THE FREQUENCY OF LUBRICATION DEPENDS ON FREQUENCY AND PERIODS OF USE, ENVIRONMENTAL CONDITIONS, AND THE USER#S OOD JUDMENT

FOR CAPACITIES LESS THAN 1$ TONS THERE ARE NO MACHINED SURFACES. THE SWIVEL TO END FITTIN CLEARANCES SHOULD BE CHECKED AND IF FOUND TO E!CEED .1%$&, THE SWIVEL SHOULD BE REMOVED FROM FROM SERVICE. REPLACE SWIVEL DO NOT DISASSEMBLE.

AS A MINIMUM LUBRICATION SCHEDULE SHOULD INCLUDE: EVERY 1' DAYS FOR FREQUENT SWIVELIN EVERY ' DAYS FOR INFREQUENT SWIVELIN

FOR CAPACITIES 1$ TONS AND LARER THERE ARE MACHINED SURFACES. THE SWIVEL TO END FITTIN CLEARANCES SHOULD BE CHECKED AND IF FOUND TO E!CEED .1& TO . 1%$&, THE SWIVEL SHOULD BE REMOVED FROM SERVICE.

DISASSEMBLY AND INTERNAL MAINTENANCE OF 1$ TON AND LARER SWIVELS BY THE USER IS PERMITTED WHEN APPROPRIATE