OSPF+RIP Tulisan Tundra

By tundra.web.id tundra.web.id

R1

[tundra@R1] > /ip address add address=192.168.1.37/24 interface=ether1 [tundra@R1] > /ip address add address=10.10.10.1/30 interface=ether2 [tundra@R1] > /ip address add address=10.10.11.1/30 interface=ether3 [tundra@R1] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST 0 192.168.1.37/24 192.168.1.0 192.168.1.255 1 10.10.10.1/30 10.10.10.0 10.10.10.3 2 10.10.11.1/30 10.10.11.0 10.10.11.3

INTERFACE INTERFACE ether1 ether2 ether3

[tundra@R1] > /ip firewall nat add action=masquerade out-interface=ether1 chain=srcnat [tundra@R1] > /ip route add gateway=192.168.1.21 [tundra@R1] > /routing ospf interface add interface=ether2 cost=1 [tundra@R1] > /routing ospf interface add interface=ether3 cost=50 [tundra@R1] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE NETWORK -TYPE AUTHENTICA AUTHENTI CATION TION AUTHENTICATION-KEY 0 ether2 10 1 broadcast none 1 ether3 50 1 broadcast none [tundra@R1] > /routing ospf set distribute-default=always-as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1 [tundra@R1] > /routing ospf print router-id: 0.0.0.0 distribute-default: always-as-type-1 redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: no redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: mpls-te-router-id: unspecified [tundra@R1] > /routing ospf network add network=10.10.10.0/30 area=backbone [tundra@R1] > /routing ospf network add network=10.10.11.0/30 area=backbone


[tundra@R1] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.10.0/30 backbone 1 10.10.11.0/30 backbone R2

[tundra@R2] > /ip address add address=10.10.10.2/30 interface=ether1 [tundra@R2] > /ip address add address=10.10.12.2/30 interface=ether2 [tundra@R2] > /ip address add address=10.10.13.2/30 interface=ether3 [tundra@R2] > ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST 0 10.10.10.2/30 10.10.10.0 10.10.10.3 ether1 1 10.10.12.2/30 10.10.12.0 10.10.12.3 ether2 2 10.10.13.2/30 10.10.13.0 10.10.13.3 ether3

INTERFACE INTERFACE

[tundra@R2] > /routing ospf interface add interface=ether1 cost=10 [tundra@R2] > /routing ospf interface add interface=ether2 cost=100 [tundra@R2] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE NETWORK -TYPE AUTHENTICA AUTHENT ICATION TION AUTHENTICATION-KEY 0 ether1 10 1 broadcast none 1 ether2 100 1 broadcast none [tundra@R2] > /routing ospf set distribute-default=never redistribute-connected=as-type-1 redistributestatic=as-type-1 redistribute-rip=as-type-1 redistribute-rip=as-type-1 [tundra@R2] > /routing ospf print router-id: 0.0.0.0 distribute-default: never redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: as-type-1 redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: mpls-te-router-id: unspecified


[tundra@R2] > /routing ospf network add network=10.10.10.0/30 area=backbone [tundra@R2] > /routing ospf network add network=10.10.12.0/30 area=backbone [tundra@R2] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.10.0/30 backbone 1 10.10.12.0/30 backbone [tundra@R2] > /routing rip set distribute-default=always redistribute-static=yes redistributeconnected=yes redistribute-ospf=yes metric-static=15 [tundra@R2] > /routing rip print distribute-default: always redistribute-static: yes redistribute-connected: yes redistribute-ospf: yes redistribute-bgp: no metric-default: 1 metric-static: 15 metric-connected: 1 metric-ospf: 1 metric-bgp: 1 update-timer: 30s timeout-timer: 3m garbage-timer: 2m [tundra@R2] > /routing rip interface add interface=ether3 [tundra@R2] > /routing rip interface print Flags: I - invalid, X - disabled, P - passive # INTERFACE SEND RECEIVE AUTHENTICA AUTHENT ICATION TION AUTHENTICA AUTHENT ICATION-KEY TION-KEY 0 ether3 v2 v1-2 none [tundra@R2] > /routing rip neighbor add address=10.10.13.1 [tundra@R2] > /routing rip neighbor print Flags: X - disabled # ADDRESS 0 10.10.13.1 [tundra@R2] > /routing rip network add network=10.10.13.0/30 [tundra@R2] > /routing rip network print Flags: X - disabled # NETWORK 0 10.10.13.0/30


R3

[tundra@R3] > /ip address add address=10.10.11.2/30 interface=ether1 [tundra@R3] > /ip address add address=10.10.12.1/30 interface=ether2 [tundra@R3] > /ip address add address=192.168.2.1/24 interface=ether3 [tundra@R3] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE INTERFACE 0 10.10.11.2/30 10.10.11.0 10.10.11.3 ether1 1 10.10.12.1/30 10.10.12.0 10.10.12.0 10.10.12.3 ether2 2 192.168.2.1/24 192.168.2.0 192.168.2.255 ether3 [tundra@R3] > /routing ospf interface add interface=ether1 cost=50 [tundra@R3] > /routing ospf interface add interface=ether2 cost=100 [tundra@R3] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE NETWORK -TYPE AUTHENTICA AUTHENT ICATION TION AUTHENTICATION-KEY 0 ether1 50 1 broadcast none 1 ether2 100 1 broadcast none [tundra@R3] > /routing ospf set distribute-default=never redistribute-connected=as-type-1 redistributestatic=as-type-1 [tundra@R3] > /routing ospf print router-id: 0.0.0.0 distribute-default: never redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: no redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: mpls-te-router-id: unspecified [tundra@R3] > /routing ospf network add network=10.10.11.0/30 area=backbone [tundra@R3] > /routing ospf network add network=10.10.12.0/30 area=backbone [tundra@R3] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA By tundra.web.id tundra.web.id

0 10.10.11.0/30 1 10.10.12.0/30

backbone backbone

R1.1

[[email protected]] > /ip address add address=10.10.13.1/30 interface=ether1 [[email protected]] > /ip address add address=10.10.14.1/30 interface=ether2 [[email protected]] > /ip address add address=10.10.15.1/30 interface=ether3 [[email protected]] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST 0 10.10.13.1/30 10.10.13.0 10.10.13.3 ether1 1 10.10.14.1/30 10.10.14.0 10.10.14.3 ether2 2 10.10.15.1/30 10.10.15.0 10.10.15.3 ether3

INTERFACE INTERFACE

[[email protected]] > /routing rip set distribute-default=never redistribute-static=yes redistributeconnected=yes redistribute-ospf=yes [[email protected]] > /routing rip print distribute-default: never redistribute-static: yes redistribute-connected: yes redistribute-ospf: yes redistribute-bgp: no metric-default: 1 metric-static: 1 metric-connected: 1 metric-ospf: 1 metric-bgp: 1 update-timer: 30s timeout-timer: 3m garbage-timer: 2m [[email protected]] > /routing rip interface add interface=ether1 [[email protected]] > /routing rip interface print Flags: I - invalid, X - disabled, P - passive # INTERFACE SEND RECEIVE AUTHENTICA AUTHENTI CATION TION AUTHENTICA AUTHENTI CATION-KEY TION-KEY 0 ether1 v2 v1-2 none [[email protected]] > /routing rip neighbor add address=10.10.13.2 [[email protected]] > /routing rip neighbor print Flags: X - disabled # ADDRESS 0 10.10.13.2 By tundra.web.id tundra.web.id

[[email protected]] > /routing rip network add network=10.10.13.0/30 [[email protected]] > /routing rip network print Flags: X - disabled # NETWORK 0 10.10.13.0/30 [[email protected]] > /routing ospf interface add interface=ether2 cost=10 [[email protected]] > /routing ospf interface add interface=ether3 cost=5 [[email protected]] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITYNET PRIORITYN ET WORK-TYPE AUTHENTICA AUTHENTI CATION TION AUTHENTICATION-KEY 0 ether2 10 1 broadcast none 1 ether3 50 1 broadcast none [[email protected]] > /routing ospf set distribute-default=always-as-type-1 redistribute-connected=as-type1 redistribute-static=as-ty redistribute-static=as-type-1 pe-1 redistribute-rip=as-type-1 redistribute-rip=as-type-1 [[email protected]] > /routing ospf print router-id: 0.0.0.0 distribute-default: always-as-type-1 redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: as-type-1 redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: mpls-te-router-id: unspecified [[email protected]] > /routing ospf area add area-id=0.0.0.1 name=area1 [[email protected]] > /routing ospf network add network=10.10.14.0/30 area=area1 [[email protected]] > /routing ospf network add network=10.10.15.0/30 area=area1 [[email protected]] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.14.0/30 area1 1 10.10.15.0/30 area1


R2.1

[[email protected]] > /ip address add address=10.10.14.2/30 interface=ether1 [[email protected]] > /ip address add address=10.10.16.1/30 interface=ether2 [[email protected]] > /ip address add address=192.168.3.1/24 interface=ether3 [[email protected]] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST 0 10.10.14.2/30 10.10.14.0 10.10.14.3 1 10.10.16.1/30 10.10.16.0 10.10.16.3 2 192.168.3.1/24 192.168.3.0 192.168.3.255

INTERFACE INTERFACE ether1 ether2 ether3

[[email protected]] > /routing ospf interface add interface=ether1 cost=10 [[email protected]] > /routing ospf interface add interface=ether2 cost=100 [[email protected]] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE NETWORK -TYPE AUTHENTICA AUTHENTI CATION TION AUTHENTICATION-KEY 0 ether1 10 1 broadcast none 1 ether2 100 1 broadcast none [[email protected]] > /routing ospf set distribute-default=never d istribute-default=never redistribute-connected=as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1 [[email protected]] > /routing ospf print router-id: 0.0.0.0 distribute-default: never redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: no redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: mpls-te-router-id: unspecified [[email protected]] > /routing ospf area add area-id=0.0.0.1 name=area1 [[email protected]] > /routing ospf network add network=10.10.14.0/30 area=area1 [[email protected]] > /routing ospf network add network=10.10.16.0/30 area=area1


[[email protected]] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.14.0/30 area1 1 10.10.16.0/30 area1 R3.1

[[email protected]] > /ip address add address=10.10.15.2/30 interface=ether1 [[email protected]] > /ip address add address=10.10.16.2/30 interface=ether2 [[email protected]] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST 0 10.10.15.2/30 10.10.15.0 10.10.15.3 1 10.10.16.2/30 10.10.16.0 10.10.16.3

INTERFACE INTERFACE ether1 ether2

[[email protected]] > /routing ospf interface add interface=ether1 cost=50 [[email protected]] > /routing ospf interface add interface=ether2 cost=100 [[email protected]] > /routing ospf interface print Flags: X - disabled, I - inactive, D - dynamic, P - passive # INTERFACE COST PRIORITY NETWORK-TYPE NETWORK- TYPE AUTHENTICA AUTHENT ICATION TION AUTHENTICATION-KEY 0 ether1 50 1 broadcast none 1 ether2 100 1 broadcast none [[email protected]] > /routing ospf set distribute-default=never d istribute-default=never redistribute-connected=as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1 [[email protected]] > /routing ospf print router-id: 0.0.0.0 distribute-default: never redistribute-connected: as-type-1 redistribute-static: as-type-1 redistribute-rip: no redistribute-bgp: no metric-default: 1 metric-connected: 20 metric-static: 20 metric-rip: 20 metric-bgp: 20 mpls-te-area: unspecified mpls-te-router-id: mpls-te-router-id: unspecified [[email protected]] > /routing ospf area add area-id=0.0.0.1 name=area1 [[email protected]] > /routing ospf network add network=10.10.15.0/30 area=area1 By tundra.web.id tundra.web.id

[[email protected]] > /routing ospf network add network=10.10.16.0/30 area=area1 [[email protected]] > /routing ospf network print Flags: X - disabled, I - invalid # NETWORK AREA 0 10.10.15.0/30 area1 1 10.10.16.0/30 area1


OSPF+RIP Tulisan Tundra

Recommend Documents