Manual Tecnico Epson s01 s02 s11 s12

SERVICE MANUAL

Busine Busin ess Projector

EB-S01/W01/X14G/S11/X11/S02/S02H EB-X02/W02/S12/S12H/X12/W12/X14 Home Proj Projector ector

EH-TW480

CONFIDENTIAL

CONFIDENTIAL

EB-S01/W01 EB-S01/W01/X14G /X14G/S11/X /S11/X11/S02 11/S02/S02H/ /S02H/X02/W X02/W02/S12 02/S12/S12H/ /S12H/X12/W X12/W12/X14 12/X14 EH-TW480 EH-TW480

NOTICE 

All rights reserved. No part of this manual may be reproduced, stored in retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of SEIKO EPSON CORPORATION.



The contents of this manual should be handled with sufficient consideration for confidentiality reasons.



After publication of this manual, the parts and mechanism may be subject to change for improvement of their performance. Therefore, note that the descriptions given in this manual may not coincide with the actual machine.



Other company or product names used herein are for identification purpose only and may be trademarks or registered trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

General Notice: Other product names used herein are for identification purpose only and may be trademarks or registered trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copy Copyri righ ghtt © 2012

SEIK SEIKO O EPSO EPSON N CORPO CORPORA RATI TION ON..

CONFIDENTIAL


About This Manual This manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the product. The instructions and procedures included herein are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding pages.

Manual Manual Configu ration CHAP CHAPTE TER R 1.

PROD PRODUC UCT T DESC DESCRI RIPT PTIO IONS NS

Provides a general overview and specifications of the product.

CHAP CHAPTE TER R 2.

TROU TROUBL BLES ESHO HOOT OTIN ING G

Describes the step-by-step procedures for the troubleshooting.

CHAP CHAPTE TER R 3.

DISA DISASSE SSEMB MBLY LY / ASS ASSEM EMBL BLY Y

Describes the step-by-step procedures for disassembling and assembling the product.

CHA CHAPTER PTER 4.

MAINT AINTE ENANC NANCE E

Describes the points to be checked and the step-by-step procedures to inspect the troubling location from errors or abnormal phenomena of the projected image.

CHAPTER 5. 5.

APPENDIX

Provides preventive maintenance procedures for servicing the product.

CONFIDENTIAL


IMPORTANT PRECAUTIONS IN SAFETY AND MAINTENANCE PERFORMANCE Here describes the important points to keep in mind in repair and maintenance performance. SYMBOLS

To prevent injury to the repair technicians and to protect the devices, the categorized safety instructions are provided in this manual with t he symbols below. Be sure to read and understand their meanings before proceeding to the next section.

Category

Symbol

Meaning

Danger

Indicates an extremely hazardous operation which, if ignored or operated incorrectly, could result in serious or fatal personal injury.

Warning

Indicates a potentially hazardous operation which, if ignored or operated incorrectly, could result in serious or fatal personal injury.

Caution

Indicates a potentially hazardous operation which, if ignored or operated incorrectly, could result in minor injury or damage to equipment.

Prohibited Matter

Indicates a prohibited action or operation in repair and maintenance performance.

Instruction

Indicates a compulsory action or operation that must be carried out in repair and maintenance performance.


SAFETY INSTRUCTIONS

CONFIDENTIAL

Never modify the product for any reason whatsoever. (Except for a case that is under the instructions to do so.)

The precautionary measures itemized below should be fully understood when performing repair and maintenance procedures. Never peer through the projection lens during repair/maintenance repair/maintenance work when the power is on. (Such an action may cause a visual disability because of a very strong light emission.) When disassembling/assembling, be sure to turn off the power switch and pull out the power cable from the projector beforehand.

Never touch the current-carrying part or high temperature temperature section during a test operation, signal measurement or any other situations that is necessary to perform the repair/maintenance work with the power turned on and the cover removed. Do not wear the metal products such as wrist watch, cuff buttons, rings, tiepin etc. to avoid getting a electric shock. Do not touch the lamp assy. or the parts around it. They are extremely hot even after completed the cooling down operation, and may cause a burn injury. Therefore, leave the unit until it becomes cool enough before performing maintenance work. Never let the safety devices mounted in this product inactivated inactivated for any reason whatsoever.

Never modify the safety devices or replace them with the ones ones that are not designated for any reason whatsoever. (Such actions may cause a fire or serious inj ury.)

Never use a deformed plug or a damaged damaged power cable to this product. If any deformations or damages are found on the power cable or plug section, replace it with a new specified power power cable. Never use the air blowers that contain flammable gas in repair/ repair/ maintenance work.

CONFIDENTIAL


Be careful not to drop a metal part such as a screw, a washer, or a clip into the inside of the product. If such cases should occur accidentally, never turn on the power supply until all the dropped parts are found and removed. Never use or replace with any any service parts that is not specified by EPSON.

Be sure to perform the repair/maintenance work on the even and stable work bench to prevent the product from dropping down or mal-operation due to the improper setting of the product.

Be sure to wear the gloves during the repair/maintenance work to avoid injuries by the parts with sharp edges such as metal plate or the like. To protect sensitive circuitry, follow the instructions below.  When disassembling or reassembling, be sure to wear static discharge equipment such as an anti-static wrist strap and a mat.  When replacing the circuit component such as a board or the optical engine, be sure to get in contact with the anti-static case containing the new one to the metal part of this product before taking it out. When performing the repair/maintenance work, be sure to use the specified tools and follow the instructions that are specified in the documents (service manual etc.) concerning to this product. When carrying out the test operation, do not block the intake and exhaust ducts. (Such an action raises the internal temperature and may cause a fire or a damages to the internal parts of this product.)

After reassembling the product, check the followings before turning the power on.  All the parts and screws are installed and secured to the proper positions.  No cables are caught in the metal frames. OTHER CAUTION

Since the lamp of this product contains mercury, be sure to dispose the used lamp pursuant to the government’s law and regulations.

CONFIDENTIAL


REVISION HISTORY After first release of this manual, the parts and mechanism may be subject to change for improvement of their performance and the manual may be revised. Be sure to always keep this manual up to date.

Revision A

Date 2011.6.15

Page of change all

B

2011.8.5

P.75 P.78 P.131

C

2012.5.28

all

Detail of change

First Release Change of caution. Addition of caution. Addition of caution. Addition of models. Full-fledged revision

CHAPTER

1 PRODUCT DESCRIPTION


Product Description

CONFIDENTIAL CONFIDENTIAL

1.1 Model Name EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 EH-TW480 are divided into three groups by their mechanical EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 mechanical differences. The classified model names are provided below. Type

Model Name

Optical Zoom (Manual)

Native resolution

EB-S01

N/A

SVGA

EB-W01 EB-X14G Business Type A

EB-S02 EB-S02H EB-X02 EB-W02

N/A 

XGA SVGA

WXGA SVGA

EB-X11



XGA

N/A

SVGA

EB-S12H

EB-W12

N/A



XGA 

EB-X14 EH-TW480

N/A

XGA

N/A

EB-X12

Home Type

WXGA

EB-S11

EB-S12 Business Type B



Horizontal Keystone Correction

WXGA XGA



WXGA



External View


Product Description

1.2 Features


Business Type A: EB-S01/W01/X14G/S02/S02H/X02/W02

The EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12 EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 /X14 EH-TW480 are portable compact business/home projectors with the following features: 

Auto Vertical-Keystone (EB-X14G/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 EH-TW480 only) When the sensor of the projector detects the change in setting, the projector automatically corrects the keystone in the vertical direction.



Horizontal Keystone Adjuster (EB-X11/S12/S12H/X12/W12/X14 EH-TW480 only) This allows you to quickly correct horizontal distortion of the projected image.

 

Direct Power On/Off No cool-down period is needed.



Project screen for WXGA (16:10) (EB-W01/W02/W12 EH-TW480 only)



Auto Iris

 

With an optional document camera (ELPDC06/ELPDC11), you can magnify and project the images of your documents. USB connection for projection (USB Display) is available. 



Business Type B: EB-S11/X11/S12/S12H/X12/W12/X14

USB terminal (Type B) for USB Display

Slide show is available (EB-S11/X11/S12/S12H/X12/W12/X14 EH-TW480 only) 

The images in a USB flash drive can be projected without using a computer



USB terminal (Type A) for USB Display



HDMI terminals (EB-S02H/S12H/X12/W12/X14 EH-TW480 only)



Enhanced security functions 

Password protection



Operation Lock Anti-theft Lock

Home Type: EH-TW480

Product Description



1.3 Specifications Model

EBS01

EBW01

EBX14G

Size

0.55 inch (without MLA)

0.59 inch (with MLA)


Pixel number

480,000 dots (800 x 600) x 3

1,024,000 dots (1280 x 800) x 3

786,432 dots (1024 x 768) x 3

480,000 dots (800 x 600) x 3

786,432 dots (1024 x 768) x 3

480,000 dots (800 x 600) x 3

786,432 dots (1024 x 768) x 3

1,024,000 dots (1280 x 800) x 3

480,000 dots (800 x 600) x 3

SVGA

WXGA

XGA

SVGA

XGA

SVGA

XGA

WXGA

4:3

16:10

4:3

16:10

Item

LCD

Native resolution Aspect ratio Specification of main part

EBS11

EBX11

EBS02

EBS02H

4:3

EBW02 0.59 inch (with MLA)


EBS12

EBS12H

EBX12

EBW12

EBX14

EHTW480




786,432 dots (1024 x 768) x 3

1,024,000 dots (1280 x 800) x 3

786,432 dots (1024 x 768) x 3

1,024,000 dots (1280 x 800) x 3

SVGA

XGA

WXGA

XGA

WXGA

4:3

4:3

16:10

4:3

16:10


Focus

Type

Manual focus

Projection Lens Zoom

Type

Digital Zoom

Manual optical zoom

Digital Zoom

Manual optical zoom

Digital Zoom

Manual optical zoom

Digital Zoom

Manual optical zoom

Ratio

1.0 - 1.35

1.0 - 1.2

1.0 - 1.35

1.0 - 1.2

1.0 - 1.35

1.0 - 1.2

1.0 - 1.35

1.0 - 1.2

Type Lamp

UHE (E-TORL)

Power consumption Life

Brightness

EBX02

Normal

4000 H

Eco

5000 H

Normal mode

Color mode: Dynamic, Eco mode Zoom: Wide

Sound output HDMI terminal Network Function

USB terminal

Operating Temperature

200 W

2600 lm

3000 lm

2600 lm

2600 lm

2800 lm

2800 lm

3000 lm

2800 lm

2080 lm

2400 lm

2080 lm

2080 lm

2240 lm

2240 lm

2400 lm

2240 lm

2 W x 1 Monaural

1Wx1 Monaural N/A

2 W x 1 Monaural

1 W x 1 Monaural x1

N/A

Wired LAN

N/A

Wireless LAN Unit

N/A

USB I/O

2 W x 1 Monaural

Type A

x 1 (S02 is excluded)

Type B

x1

Temperature

5°C to 35°C

Humidity

20% to 80%

x1

Product Description


Model

EBS01

Item Operating Altitude

Normal

EBW01

EBX14G

EBS11

EBX11

EBS02

EBS02H


EBX02

0 m to 2286 m <0 <0 ft to 7500 ft>

High altitude mode

Over 1500 m / 4,921 ft

Start-up period

5 seconds

Warm-up period

30 seconds

Cool-down period

Instant off

Power Consumption 220-240V Lamp Area (Europe, etc.) Standby (Network)

ON (Normal)

283 W

ON (Eco)

234 W

ON

2.9 W

OFF

0.36 W

ON (Normal)

270 W

ON (Eco)

223 W

ON

3.3 W

OFF

0.47 W

Rated Voltage & Current Size

Excluding feet Maximum Dimension

Weight Fan noise

100 - 240 V AC ± 10%, 50/60 Hz

Power supply voltage

100-120V Lamp Area (JAPAN, USA,etc.) Standby (Network)

EBW02

Unit: mm

100 - 240 V AC 50/60 Hz 2.9 - 1.3 A 228 (D) x 295 (W) x 77 (H) 228 (D) x 295 (W) x 79 (H) Approx. 2.3 kg/5.1 lbs

Normal mode

37 dB

Eco mode

29 dB

EBS12

EBS12H

EBX12

EBW12

EBX14

EHTW480

Product Description



1.4 Dimensions

25.8

24.4

95.2

37

29 130.8

18.2

36.3

174.5 3XM4 9mm

0 2

8 . 9 2

1 9

1 0 1 7 2 1

8 . 9 6 1

5 9 2

2 4 2

0 5 1

3 . 8 0 1 0 7

22.5 12

110

92.3

228

5 . 9 7

6 7

5 .

3 2 1

Product Description


1.02

0.96

3.75


1.5

1.1 5.15

0.72

1.43

6.87 3XM4 9mm

8 . 0

7 1 . 1

6 . 3

8 9 . 3

4 8 . 4

0 0 . 5

9 6 . 6

6 . 1 1

3 5 . 9

1 9 . 5

6 2 . 4 8 . 2

0.89 0.5

4.33

3.63

8.98

0 . 3

3 1 . 3

1 . 0 1 .

Unit: inch


Product Description


1.5 Ceiling Mount

81 1 6

1 4

9 5 1

160

200

0 5 1

° 8 1

° 8 1

ELPMB23 ° 8 1

° 8 1

9 7

Unit: mm

Manual Tecnico Epson s01 s02 s11 s12

Recommend Documents