ITP (Painting)

Prepared

Issued

Review

Approved

1

METHOD STATEMENTS (including coating procedure)

2

CONTROL OF INSPECTION, MEASURING & TEST EQUIPMENT

3

QUALIFICATION TESTS

3.1 Field/shop painters 3.2 Painting materials receiving inspection 4

BEFORE APPLICATION - MATERIALS

4.1 Substrate identification & preservation status 4.2 Painting system selection 4.3 Equipment check, abrasive/paint material condition check 5

PAINTING APPLICATION

5.1 Apparatus: condition/application (daily monitoring) 5.2 Weather condition (I.e. air temperature, relative humidity, surface temperature, etc.) 5.3 Painting mixing ratio 5.4 Surface preparation (i.e. surface cleanliness, roughness, etc.) 5.5 Primer coating (i.e. Wet & Dry Film Thickness, etc.) 5.6 Intermediate coating (i.e. Wet & Dry Film Thickness, etc.) 5.7 Finish coating (i.e. Wet & Dry Film Thickness, etc.) 5.80 Visual appearance 6

INSPECTION

6.1 Final visual check 6.2 DFT check 6.3 Adhesion test (if required) 7

REPAIR / TOUCH-UP

7.1 Visual check 7.2 DFT check Key S = "Contractor", E = "Client”, C = “COMPANY”, A = “Third Party” H = Hold point - notification required, presence mandatory, W = Witness point - notification required, presence not mandatory, S = Surveillance R = Review () = Spot checking √ = 100% inspection Prepared By Issued By Reviewed By • • • •

Print Name

Date

Print Name

Date

Print Name

Dat