Document No. 020-221-02E First Edition : Apr 28, 2009 Second Edition : Jan 8, 2010
Printed in Japan
Export Restrictions Applying to CR-IR 391CL Japanese export restrictions and foreign exchange regulations apply to this equipment. Therefore, government approval obtained through due procedure is required in order to export or otherwise remove such equipment from Japan. Note that the same restrictions apply not only to the main unit but also to after-sale parts, service manuals and service training (for exporting or transferring technology) when such items are dispatched or shipped to foreign countries and when service training is given for trainees from foreign countries.
The correlation between mR (milliroentgen), a unit of radiation dose, and μC/kg (microcoulomb/kilogram), an international unit of radiation dose, is 1mR=0.258μC/kg.
1. Handling of This Manual 1.1 Notes on the Use of the Service Manual 1.
This document is intended to be read by the service personnel of FUJIFILM Corporation or authorized agent who is commissioned by FUJIFILM Corporation to perform servicing tasks. Under these circumstances, no one is allowed to perform the following actions without the prior written permission from FUJIFILM Corporation
Duplicating or reproducing this document in whole or in part Disclosing this document, in whole or in part, to a person other than the authorized service personnel Lending or transferring this document, in whole or in part, to a third party
2.
Due care must be exercised when handling this document because it contains product internal structure descriptions and other confidential information. * When the contents of this document need be changed, the information about such changes will be conveyed using “Engineering Change Notice (ECN).” The “Engineering Change Notice (ECN)” must also be handled using the same care as for this document.
3.
4.
Due to a product development schedule, the product specifications and available options/variations prevailing at the time of the release of this document may differ from the descriptions given in this document. In such an instance, a Service Engineering Information will be issued as needed to furnish latest information about inapplicable specifications and components.
1.2 Warning and Cautionary Information Precautions during the service work are indicated by the following terms and symbols.
WARNING Used when death or serious injuries may occur if this instruction is not observed.
CAUTION Used when minor or medium levels of physical injury may be incurred if the instruction is not observed. Also used when the machine may suffer serious trouble (such as unrecoverable or difficult-to-recover trouble).
➤ IMPORTANT Used when the machine may suffer damage, or any failure or malfunction may occur, if the instruction is not observed.
NOTE Used to indicate the matters that need attention during steps of the procedure.
➥ REFERENCE Used to indicate terminology or supplemental explanations.
If you have any doubt about the contents of this document or find errors, contact your local FUJIFILM representative.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
1
2 1.3 Servicing Instruments and Tools that Require Inspection/Calibration The machine should be installed and serviced by use of servicing instruments and tools that have been regularly inspected and calibrated as appropriate. If the machine were serviced using servicing instruments and tools that have not been inspected and calibrated, proper performance of the machine could not be guaranteed. Servicing instruments and tools that require inspection/calibration are as listed below. The inspection/calibration should be planned and performed in accordance with the specifications and instruction manuals of the applicable servicing instruments and tools.
■ Instruments and tools that require inspection/calibration Name Digital multimeter
MD: Machine Description 1. System Configuration.................................................................. MD-1 1.1 System Configuration................................................................... MD-1 1.2 Operating Environment................................................................. MD-1 1.3 Connectors................................................................................... MD-3
2. System Connection Example...................................................... MD-5 3. Software Function Overview....................................................... MD-6 4. Descriptions of Software Control............................................... MD-12 4.1 Data Flow between RU and Console............................................ MD-12 4.1.1 Data Flow during Routine Processing...................................... MD-12 4.1.2 Flow of Network Setting Data................................................... MD-12
4.2 Error Handling............................................................................... MD-13 4.3 What Is Sleep Mode?................................................................... MD-13 4.4 RU Bootup Processing................................................................. MD-14 4.5 RU Termination Processing.......................................................... MD-15
Running the Dell Diagnostics Express Test............................. Memory Checks........................................................................ CPU Fan Checks...................................................................... CPU Checks............................................................................. Motherboard Checks................................................................
2.9 Customizing the Event Viewer...................................................... MT-10
3. Information Useful for Error Recovery....................................... MT-11 3.1 Collecting Logs for Maintenance Purpose.................................... MT-11 3.2 Error for Not Registering the Client Device................................... MT-11
4. Troubleshooting (for DELL PC).................................................. MT-12 4.1 Analysis Flow for When Your Computer Does Not Start.............. MT-13 4.2 Analysis Flow for When the Monitor Does Not Operate Normally........................................................................................ MT-13 4.3 Analysis Flow for When the Mouse Does Not Operate Normally........................................................................................ MT-14 4.4 Analysis Flow for When the Keyboard Does Not Operate Normally........................................................................................ MT-14 4.5 Checking the System Lights......................................................... MT-14 4.6 Confirming the Diagnostic Lights.................................................. MT-15 020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
6
7
Contents (CR-IR 391CL Service Manual)
MC: Checks, Replacement and Adjustment of Parts 1. Reinstalling the OS and the Application..............................................
MC-1
1.11 Restoring the CR-IR 391CL Config Data...................................... MC-70
1.13 Restoring the CR-IR 391CL Configuration Data (patient information)...................................................................... MC-74
1.3 Installing and Setting Up the OS................................................... MC-3 1.3.1 Installing and Setting Windows Vista........................................ MC-3 1.3.2 Installing the Driver Software.................................................... MC-12 1.3.3 Setting the OS.......................................................................... MC-25
1.4 Setting the Network...................................................................... MC-35 1.4.1 1.4.2 1.4.3 1.4.4
Installing .NET Framework....................................................... Setting the IP address.............................................................. Adding the Windows Components........................................... Setting the Service (Only for Server PC)..................................
MC-35 MC-37 MC-40 MC-42
1.5 RU Settings................................................................................... MC-43 1.5.1 Installing the RU PC-TOOL...................................................... MC-43 1.5.2 Setting Up and Checking Firewall Settings.............................. MC-46 1.5.3 Installing and Registering RU-AP............................................. MC-52
1.6 Installing the SQL Server.............................................................. MC-58 1.7 Installing the CR-IR 391CL Software............................................ MC-61 1.7.1 1.7.2 1.7.3 1.7.4
Installing the CR-IR 391CL....................................................... Installing a Settings File............................................................ Installing Menu and Parameter Files........................................ Installing the Standard Kit CD..................................................
MC-61 MC-63 MC-64 MC-65
1.14 Reconstructing the Image Database............................................ MC-77
2. Service Parts Replacement (for DELL PCs).............................. MC-81 2.1 Preparation for Parts Replacement.............................................. MC-81 2.2 Hard Disk...................................................................................... MC-82 2.3 DVD Drive..................................................................................... MC-82 2.4 FD Drive........................................................................................ MC-84 2.5 CPU.............................................................................................. MC-84 2.6 Memory......................................................................................... MC-85 2.7 Motherboard................................................................................. MC-86 2.8 Power Supply Unit........................................................................ MC-87
3. Updating the Software................................................................. MC-88 3.1 Updating the CR-IR 391CL........................................................... MC-88 3.2 Updating the RU Software............................................................ MC-88
1.8 Settings by the Simplified Setup Wizard....................................... MC-66 1.9 IIS Network Virus Protection......................................................... MC-67 1.10 Making Checks Using the Service Utility...................................... MC-68 1.10.1 Running the Simplified Setup Wizard....................................... 1.10.2 Checking for Connection with Other Equipment....................... 1.10.3 Checking the Date Format........................................................ 1.10.4 Installing Adobe Reader and Copying the Reference Guide.... 1.10.5 Setting the User Account Control (Activate).............................
020-221-02E 01.08.2010 FM5563
MC-68 MC-68 MC-68 MC-68 MC-69
CR-IR 391CL Service Manual
7
8
Contents (CR-IR 391CL Service Manual)
Appendix 1 Setup for Security Enhancement.........................
Appx1-1
Appendix 2 CR-IR 391CL Software Version Upgrade.............
Appx2-1
Appendix 3 Option Key / AP Key Installation..........................
MU: Maintenance Utility 1. Overview of Service Utility Functions............................................ MU-1
6.4 Film Annotation Characters.......................................................... MU-69
2. Starting, Logging-in to, and Exiting the Service Utility............ MU-2
MU-74 MU-75 MU-77 MU-80 MU-84 MU-88
3. Top Window.................................................................................. MU-4 4. Regional and Language Options Settings................................. MU-5 5. Simplified Setup Wizard.............................................................. MU-8 5.1 Starting the Simplified Setup Wizard............................................ MU-8 5.2 Setting the Date and Time............................................................ MU-9
6.4.1 Film Annotation Character Setup (Direct Editing of FilmStrFmt)................................................... 6.4.2 FilmStrFmt File Description Format.......................................... 6.4.3 Changing the Film Annotation Characters................................ 6.4.4 Format Descriptors................................................................... 6.4.5 Attribute Descriptors................................................................. 6.4.6 Film Annotation Character Verification Procedure...................
6.5 Person Name................................................................................ MU-88 6.6 Modality Settings.......................................................................... MU-91
5.3 System Settings............................................................................ MU-10
5.5 Setting the Image Reader............................................................. MU-17 5.6 Setting the Film Printer (option).................................................... MU-18 5.7 Setting for DICOM Storage Device (option).................................. MU-22
7.1.1 7.1.2 7.1.3 7.1.4
Initializing the Patient Database............................................... Initializing the Output Queue.................................................... Initializing the Image Database................................................ Initializing the Preset DB..........................................................
MU-93 MU-94 MU-96 MU-98
5.8 Exiting the Simplified Setup Wizard.............................................. MU-24
5. Executing the Error Analysis Tool (Dell Diagnostics).............. PM-5 5.1 Conducting the Dell Diagnostics Express Test.............................
PM-5
6. Functional Checks....................................................................... PM-5 6.1 Confirmation of Image Input to Storage onto DVD.......................
PM-5
6.2 Image Output to Film....................................................................
PM-5
7. Backup of Settings and Verification of Date and Time............. PM-6 7.1 Backup of Setup Files and Log Files............................................
PM-6
7.2 Verification of Date and Time....................................................... PM-12
3.1 Unloading and Unpacking.............................................................
IN-4
3.2 Checking the Component Items...................................................
IN-5
3.3 Installing the Accessories and Optional Items................................
IN-6
3.3.1 Keyboard, Mouse, and Power Cable........................................ 3.3.2 Monitor...................................................................................... 3.3.3 Film Printer Hardware Setup (option).......................................
IN-6 IN-6 IN-6
3.4 Connecting a Cable Between the RU and Other Equipment........
IN-7
3.4.1 Making a Cable Connection to the RU..................................... 3.4.2 Film Printer Cable Connection (option)....................................
4.1 Setting the Regional and Language Options................................
IN-8
4.2 Changing the Displayed Language and Replacing the Menu Database...................................................................... IN-12 4.3 Option Key / AP Key Installation................................................... IN-15 4.3.1 Option Key Installation.............................................................. 4.3.2 AP Key Installation...................................................................
IN-15 IN-16
4.4.5 4.4.6 4.4.7 4.4.8 4.4.9
Server Equipment Settings....................................................... Setting the Image Reader......................................................... Setting the Film Printer............................................................. Setting the Storage Device....................................................... Exiting the Simplified Setup Wizard..........................................
Installing the RU PC-TOOL...................................................... Setting Up and Checking Firewall Settings.............................. Installing and Registering RU-AP............................................. Setting the User Account Control (Activate).............................
IN-28 IN-33 IN-38 IN-42
4.6 Film Printer Software Setup (option)............................................. IN-43 4.6.1 Installing the Option Key for Application Key............................ 4.6.2 Reinstalling the AP Key............................................................ 4.6.3 DICOM Print Setup...................................................................
IN-43 IN-44 IN-44
4.7 Checking Connections with Other Equipment...............................
IN-45
4.8 Exiting the Service Utility.............................................................. IN-46
5. Checkup Work.............................................................................. IN-47 5.1 Checking the Startup and Configuration of the RU....................... IN-47 5.1.1 5.1.2 5.1.3 5.1.4
Checking the Startup of the RU................................................ Checking the RU’s Version....................................................... Checking the RU’s Message File............................................. Checking the RU Configuration................................................
IN-47 IN-50 IN-51 IN-52
5.2 Checking the System Configuration............................................. IN-53 5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD................................................... IN-53 5.4 Checking Output Images (option)................................................. IN-65
4.4 Setup by the Simplified Setup Wizard.......................................... IN-17 4.4.1 4.4.2 4.4.3 4.4.4 020-221-02E 01.08.2010 FM5563
Startup of the Service Utility..................................................... Starting the Simplified Setup Wizard........................................ Setting the Date and Time........................................................ System Settings........................................................................
IN-17 IN-18 IN-19 IN-20
CR-IR 391CL Service Manual
13
14
Contents (CR-IR 391CL Service Manual)
6. Setup File Backup and RU Error Log Verification/Deletion..... IN-68 6.1 Backing Up the CR-IR 391CL Setup File...........................................
IN-69
6.2 Backing Up the RU Setup File...................................................... IN-76 6.3 Verifying and Deleting the RU Error Log...................................... IN-78 6.3.1 Verifying the RU Error Log....................................................... 6.3.2 Deleting the RU Error Log........................................................
IN-78 IN-79
6.4 Turning OFF the CR-IR 391CL and RU........................................
IN-80
7. Links to Individual Option Items................................................. IN-81
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
14
15
Contents (CR-IR 391CL Service Manual)
Appx IN: Installation – Appendix Appendix 1 Settings for Saving Images into DICOM Storage Equipment.............................................................. Appx1-1
2.2.1 2.2.2 2.2.3 2.2.4
Network Setting........................................................... LinkStation RAID Setting............................................. Shared Folder Setting.................................................. Confirming Connection between LinkStation and CR-IR 391CL...............................................................
Appx2-15 Appx2-18 Appx2-19
2.3 Setting in the Service Utility..............................................
4. Backing up the Setup File.................................................... Appx2-24
4. Backing up the Setup File.................................................... Appx1-12
5. Turning ON/OFF the NAS.................................................... Appx2-25
Appx2-20
3. Connection Check............................................................... Appx2-22 3.1 Confirming Connection between LinkStation and CR-IR 391CL (Access to the Network Drive)....................
Appx2-22
3.2 Confirming Connection between TeraStation and CR-IR 391CL....................................................................
Network Setting........................................................... TeraStation RAID Setting............................................ Shared Folder Setting.................................................. Confirming Connection between TeraStation and CR-IR 391CL...............................................................
2.2 Installation Procedures for LinkStation (LS-WH1.0TGL/R1 and LS-WH2.0TGL/R1)..................... 020-221-02E 01.08.2010 FM5563
6. Mirroring Setting for Image Folder....................................... Appx2-26 6.1 Creating a Save Destination Folder..................................
Appx2-26
6.2 Synchronization Function Setting.....................................
Appx2-26
6.3 Mirroring between NAS.....................................................
Appx2-30
7. Restoring Procedures Using the Automatic Backup File..... Appx2-31
Appx2-4 Appx2-9 Appx2-13
2.1 Installing the Option Key...................................................
Appx3-2
2.2 Reinstalling the AP Key....................................................
Appx3-3
2.3 Settings in the Service Utility............................................
20. Setting for DICOM-MWM..............................................................
PC-7
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
16
Safety-I
CR-IR 391CL Service Manual
Safety Precautions
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Safety-I
Safety-II
Safety Precautions
Control Sheet Issue date
Revision number
04/28/2009 01/08/2010
01 02
020-221-02E 01.08.2010 FM5563
Reason New release (FM5535) Revision for software V1.1(B) (FM5563)
Pages affected All pages 3 to 5
CR-IR 391CL Service Manual
Safety-II
Safety-1
1. Precautionary Labels
1. Precautionary Labels To prevent danger to humans and serious accidents, observe the following.
WARNINGS Unless indicated otherwise, be sure to turn off the power switch before maintenance work, and disconnect the power plug from the outlet. Even if the power switch is OFF, 100 to 240VAC (differs according to machine specifications) will still be supplied to the primary input terminal of the unit if the power cable is connected, and this may result in possible electric hazards.
CAUTIONS The grounding wire must be connected. To avoid damages to the parts/units due to static discharge, use a wrist strap putting one end on your wrist and the other end on the grounded section of the equipment, as illustrated below. When doing so, make sure to unplug the line cord plug to avoid electrical hazards if using a PC in which the power is energized to the internal power supply or circuits when it is inserted into an outlet.
Wrist strap
As neckties, scarves, and necklaces may get caught in the unit during work, remove these items or take precautions against such accidents. Never modify the unit unless otherwise specified. Modification of the safety unit (interlock, breaker, temperature fuse, etc.) will cause serious problems as it is not only dangerous but violates the related laws and regulations.
00010003.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Safety-1
Safety-2 The unit is also pasted with precautionary labels. Follow the instructions on the labels when carrying out work.
➥ REFERENCE PC box: Labels shown below are attached on the top face of the PC when it is placed in a vertical position. Identification Label
Sample year of manufacture
Safety precautions (Control Unit) Follow the precautions below when installing, using, and servicing the control unit (PC). See the User’s Guide provided for details on the control unit. Input voltage : 90V to 135V (60Hz) or 180V to 265V (50Hz) Electric hazard prevention : The power cord of the control unit and monitor uses a 3-pin plug. Connect it to a properly grounded power outlet. When using an extension cord, use a 3-line type with a grounding pin. Place of installation : Avoid places where dust and foreign particles may enter inside through the computer opening. Avoid installing near heaters and heat sources. When installing directly on the floor, ensure that a 5cm or more distance is secured between the equipment’s bottom face and the floor. Precautions when working on internal parts of the control unit : (1) Turn off the power of the PC, monitor, and other peripheral devices. (2) Disconnect the power cord from the outlet to prevent electric hazard. (3) Open the I/O panel on the rear of the PC, touch the metallic part to fully discharge body static electricity before accessing. (4) When removing the board and memory module, etc., hold them without directly touching the connectors and pins and place them in a static electricity prevention package.
■ Safety Precautions (LCD monitor) WARNING High voltage is applied inside the LCD monitor. To prevent electric hazards and danger, the LCD monitor’s internal parts cannot be accessed. The LCD monitor does not consist of parts serviceable by the service engineer.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Safety-2
Safety-3
2. Cautions Relating to Electromagnetic Compatibility 2.1 Electromagnetic Compatibility Instruction This equipment complies with the following electromagnetic compatibility (EMC) standard by comforting to the requirements of IEC 60601-1-2:2001+A1:2004/EN 60601-1-2:2001+A1:2006. EMC Standard: CISPR 22:2005/EN 55022:2006 CISPR24:1997+A1:2001+A2:2002/ EN55024:1998+A1:2001+A2:2003 IEC 61000-3-2:2005/EN 61000-3-2:2006 IEC 61000-3-3:1994+A1:2001+A2:2005 However, there is no guarantee that harmful electromagnetic interference will not occur in any installation environment. This equipment generates, uses and can radiate radio frequency energy. In a particular environment, e.g., the equipment is not installed and used in accordance with the instructions or any device that is not compliant with the EMC Standard is used in a surrounding area, harmful interference may result, causing the equipment or surrounding device to malfunction. If this equipment causes harmful interference to other equipment or receives harmful interference from other equipment, you are encouraged to try to correct the interference by one or more of the following measures:
Table 1 Guidance and manufacturer's declaration - electromagnetic emissions The CR-IR 391CL is intended for use in the electromagnetic environment specified below. The customer or the user of the CR-IR 391CL should assure that it is used in such an environment.
Emissions test Noise terminal voltage
Compliance Class B
CISPR22 Electric field noise strength
Class B
CISPR22 Harmonic emissions
Class D
EN61000-3-2 IEC61000-3-2 Voltage fluctuations/ flicker emissions
Complies
EN61000-3-3 IEC61000-3-3
Reorient or relocate the equipment. Increase the separation between the equipment and the affected equipment. Connect the equipment into an outlet on a circuit different from that to which the affected equipment is connected. If the problem persists, discontinue the use of the equipment and consult the manufacturer of the affected equipment or our official dealer.
WARNING Keep the equipment away from sources of strong electromagnetic radiation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Safety-3
Safety-4 Table 2 Guidance and manufacturer's declaration - electromagnetic immunity The CR-IR 391CL is intended for use in the electromagnetic environment specified below. The customer or the user of the CR-IR 391CL should assure that it is used in such an environment.
Immunity test Electrostatic discharge(ESD)
EN/IEC 60601 test level
Compliance level
±2kV contact ±4kV contact ±2kV air ±4kV air ±8kV air
±2kV contact ±4kV contact ±2kV air ±4kV air ±8kV air
Electrical fast transient/burst
±1kV for power supply lines
±1kV for power supply lines
EN61000-4-4 IEC61000-4-4
±0.5kV for input/output lines
±0.5kV for input/output lines
Surge
±0.5, ±1kV differential mode
±0.5, ±1kV differential mode
EN61000-4-5 IEC61000-4-5
±0.5, ±1.0, ±2.0kV common mode
±0.5, ±1.0, ±2.0kV common mode
Voltage dips, short interruptions and voltage variations on power supply input lines
<5% UT (>95% dip in UT) for 0.5 cycle
<5% UT (>95% dip in UT) for 0.5 cycle
70% UT (30% dip in UT) for 25 cycles
70% UT (30% dip in UT) for 25 cycles
<5% UT (>95% dip in UT) for 250 cycles
<5% UT (>95% dip in UT) for 250 cycles
1 A/m
1 A/m
Conducted RF EN61000-4-6 IEC61000-4-6
3 Vrms 150 kHz to 80 MHz
3 Vrms
Radiated RF EN61000-4-3 IEC61000-4-3
3 V/m 80 MHz to 1 GHz
3 V/m
EN61000-4-2 IEC61000-4-2
EN61000-4-11 IEC61000-4-11
Power frequency (50/60Hz) magnetic field EN61000-4-8 IEC61000-4-8
NOTE: UT is the a.c. mains voltage prior to application of the test level.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Safety-4
Safety-5 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Safety-5
Safety-6 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Safety-6
Spec-I
CR-IR 391CL Service Manual
Product Specifications
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Spec-I
Spec-II
Product Specifications
Control Sheet Issue date
Revision number
04/28/2009 01/08/2010
01 02
020-221-02E 01.08.2010 FM5563
Reason New release (FM5535) Revision for software V1.1(B) (FM5563)
Pages affected All pages All pages
CR-IR 391CL Service Manual
Spec-II
Spec-1
1. Equipment Specifications
1.2 Optional Components Product Code
1.1 Product Code Hardware Product Code IR 391 CL A1-V1 B E
Description Control Unit PC control unit (Dell OptiPlex780DT/Core2Duo E7500) Identification label CR-IR 391CL Application Software V1.1(B) CR-IR 391CL Standard Kit Manual Kit for Hospitals CR-IR 391CL Reference Guide CR-IR 391CL Operation Manual (Software License Agreement is included) CR-IR 391CL Quick Guide
Q’ty
Remarks
1 1 1 1 1 1
Description
Q’ty
IR 391 LCD-17 E
17 inch LCD (DELL E170S)
1
IR 391 LCD-17H E
17 inch LCD (Nanao FlexScan S1721)
1
IR 391 LCD-20W E
20 inch LCD (S2031W-HBK)
1
IR 391 MFP E
CR-IR 391CL MFP Key Software
1
IR 391 DICOM PRINT E
CR-IR 391CL DICOM Print Key Software
1
IR 391 DICOM STORAGE E
CR-IR 391CL DICOM Standard CR Storage Key Software
Presented below are the numbers of images that can be stored on the media (measurement values). (Note that actual numbers of images that can be stored may increase/decrease in relation to the values shown in the tables below, depending on the free space available on the disk or image data capacity.)
■ Hard disk Image storage capacity : 240GB
1.4 Environmental Conditions
Image Size Condition
Temperature
Humidity
Operating
10ºC - 35ºC
30% - 80%H (No dew condensation)
Non-operating
-20ºC - 60ºC
30% - 80%H (No dew condensation)
Increase humidity appropriately if it is too dry to operate the equipment during winter.
1.5 Electrical Specifications Frequency PC
50Hz/60Hz
Monitor
Input voltage
Max. input current
AC115 to 230V
4.0A/2.0A
S2031W-HBK 50Hz/60Hz
AC100V to 120V AC200V to 240V
0.7A
DELL E170S
50Hz/60Hz
AC100V to 120V AC200V to 240V
1.5A
S1721-SHBK
50Hz/60Hz
AC100V to 120V AC200V to 240V
0.65A/0.4A
■ Network cable
Storable number of images
14"17"
14"14"
Approx. 15,000 images
Approx 17,000 images
■ DVD+RW/DVD-RW DVD capacity : 4.7GB, UDF format Image size ratio : 14"17" : 14"14" : 10"12" : 8"10" = 1 : 6 : 2 : 1 (for standard image/high-density image) Standard Image Uncompressed
1.7 Discarding the Equipment When discarding the CR-IR 391CL equipment, be sure to dispose of any private information stored on it completely.
“2. System Connection Example.” of “MD: Machine Description.” “3.4 Connecting a Cable Between the RU and Other Equipment.” of “IN: Installation.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Spec-2
MD-I
CR-IR 391CL Service Manual
MD: Machine Description
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-I
MD-II
MD: Machine Description
Control Sheet Issue date
Revision number
04/28/2009 01/08/2010
01 02
020-221-02E 01.08.2010 FM5563
Reason New release (FM5535) Revision for software V1.1(B) (FM5563) Changes in pagination (FM5563)
Pages affected All pages 1, 3, 4, 6 to 8, 16 to 18 5, 9 to 15
CR-IR 391CL Service Manual
MD-II
MD-1
1. System Configuration
1.2 Operating Environment
This section shows the system configuration, which includes the CR-IR 391CL application, and the operating environment for the PC.
■ PC Main Unit Item
Description
The following PC is used.
CPU
Dell OptiPlex 760 (desktop)
System memory 2GB or more
Dell OptiPlex 780 (desktop)
HDD
250GB or more
Drive
DVD-Super Multi Drive (S-ATA)
Extension slot
PCI × 1 (Necessary for insertion of a video board when the DVI output is used.)
Graphic
Display resolution: 1280 × 1024 or more Number of display colors: 24bit Color or more * DVI 1.0 or VGA output is recommended.
Network
100BASE-TX 1000BASE-T
OS
Windows Vista Business SP1 (32bit)
Port
Keyboard connection port: USB or 6-pin mini-DIN PS/2 Mouse connection port: USB or 6-pin mini-DIN PS/2 * The USB 2.0 port is recommended.
Input device
Keyboard and mouse
1.1 System Configuration ■ System Configuration PC main unit Video cable Mother board
Serial ATA
Monitor
CR-IR 391CL application CD-ROM System area/image area (drive C)
Intel Core 2 Duo E7300: 2.66GHz or more; secondary cache: 3072KB or more
■ Monitor Item Display resolution
Option key CD-ROM
Input format
Description 17 inch LCD (S1721-SHBK)
1280 × 1024
17 inch LCD (DELL E170S)
1280 × 1024
20 inch LCD (S2031W-HBK)
1680 × 1050
DVI 1.0 (DVI-I 29-pin) or analog RGB (D-Sub 15-pin)
DVD-Super Multi Drive Network i/f USB Connector Accessories (keyboard and mouse) 020-221-02E 01.08.2010 FM5563
• • •
00000042.ai
CR-IR 391CL Service Manual
MD-1
MD-2 ■ Software Item
Description
OS
Windows Vista Business SP1 (32bit)
Internet Server
Microsoft Internet Information Service
Internet browser
Microsoft Internet Exproler V7.0 or more
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MD-2
MD-3 1.3 Connectors
● Memory modules
This section shows locations of the connectors and memory slots of the PCs below. Dell OptiPlex 760
2 GB memory (DIMM1/DIMM2) is installed and shipped from factory. Riser card (ATAPI circuit board) in PCI (SLOT2) is installed and shipped from factory.
Dell OptiPlex 780
System board
■ Dell OptiPlex 760
DIMM sockets (DIMM1/DIMM2 is used)
DIMM 4
● System board location
SATA 0
DIMM 2 DIMM 3
SATA 1
DIMM 1
System board
SATA 3
SATA 2
PCI Express x16 (SLOT1)
Diagnostic lights
System lights (power light and hard disk light)
PCI(SLOT2) PCI(SLOT3)
MD000263.EPS
MD000274.AI
● Connector configuration (PC rear panel) Parallel port connector
Serial port connector Video connector D-Sub (analog output) 020-221-02E 01.08.2010 FM5563
NIC connector
USB port (6-port) MD000273.AI
CR-IR 391CL Service Manual
MD-3
MD-4 ■ Dell OptiPlex 780
● Memory modules 1 GB or 2 GB memory (DIMM1/DIMM2) is installed and shipped from factory.
● System board location
DVI adapter card in PCI Express x16 (SLOT1) is installed and shipped from factory. Riser card (ATAPI circuit board) in PCI (SLOT2) is installed and shipped from factory.
System board
System board
DIMM sockets (DIMM1/DIMM2 is used)
DIMM 4 SATA 0
DIMM 2 DIMM 3
Diagnostic lights
SATA 1
DIMM 1
SATA 3
System lights (power light and hard disk light)
SATA 2 MD000263.EPS
● Connector configuration (PC rear panel) � Parallel port connector � Video connector DVI (digital output)
� Serial port connector
PCI Express x16 (SLOT1)
� NIC connector
PCI(SLOT2) PCI(SLOT3) MD000276.eps
DisplayProt connector eSATA connector
020-221-02E 01.08.2010 FM5563
� USB port (6-port) � Video connector D-Sub (analog output)
MD000275.eps
CR-IR 391CL Service Manual
MD-4
MD-5
2. System Connection Example This section shows an CR-IR 391CL system connection example.
NOTE To connect the CR-IR 391CL to the RU, use the following network cable. The UTP type which is compliant with category 5 or more should be used. IEC950/UL1950-compliant cables should be used.
For the network type RU operation With 100BASE-TX (straight) cables, connect the RU to the CR-IR 391CL via a hub. 100BASE-TX cable (straight) CR-IR 391CL
HUB
100BASE-TX cable (straight) RU
Other connected hosts (Film Printer) 100BASE-TX cable (straight)
00000028.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-5
MD-6
3. Software Function Overview
Function
CR Study Function
Description
Study registration function
Registers a study to perform image input/verification.
Displaying a scheduled study
Displays a study registered using the study registration function.
Scheduled study modification function
Modifies information of a registered study. Adding/changing/deleting exposure menus Replacing images Inactivating images/determining mis-exposed images and re-exposures Relocating order of image display Displaying/editing patient information Setting a target destination for image output
Performing a study
Inputs images, in conjunction with RU, in an already registered study and verifies images thus collected.
Indicator function
Indicates the CR-IR 391CL system status according to the following 6 classifications: RU, Disk, NAS, Printer, Output Queue condition and Event, and then informs the user of the result of indication.
Patient List Function
Description
Performs a searching for the study data by way of study of this equipment and study contained on the disks. Searching for study data Filtering is applied to facilitating selection of a target study and then study data is searched for. Displaying the study list
Displays the study list of this equipment and the study list contained on the disks.
Study data selection
Selects study data on the study list of this equipment and the study list contained on the disks, and then verifies such study data.
Study data operation
Operates the selected study data.
NAS Drive (Network Attached Storage) Function Data management
Description Read/Delete images from NAS. Observe remaining capacity for NAS and study/patient DB.
Automatic Image Transfer Process in the background
When the capacity of PC HDD is full, the oldest image is transferred to NAS and deleted from the PC HDD.
Auto backup of setting/ log
Backup the setting/log automatically to NAS at the time of exiting an application.
Description
Patient-originated (ID input)
Execute new registration for patient.
Patient-originated (Patient list)
Search for patient.
Patient-originated (Refer to study data)
Refer to and operate the study for selected patient.
Patient-originated (Execute CR study)
Execute a CR study for selected patient.
Patient-originated (Import endoscopic and general-purpose image)
Import a general-purpose image and endoscopic image for selected patient. (Endoscope Image Import Function Option/General-Purpose Image Import Function Option are required)
Monitoring
Automatic display of retrieved images from the modality.
Starting Utilities
Displays the version information Start up Customize screen Start up Client Utilities/Start up Study Utilities
Customize
Customize Main window behavior to adjust user workflow
020-221-02E 01.08.2010 FM5563
Study Utilities
CR-IR 391CL Service Manual
MD-6
MD-7 Image Viewer Function
Function Description
Restandardization
Modifies standardization conditions so that restandardization processing is performed appropriately.
Adding Annotations
Arrows, shapes, text (character strings), and markers can be added to an image. For the image of an FCR study (not processed) as the object, it is also possible to measure the image and to display the measuring result. Up to 32 annotations can be attached to a single image. • Shapes (Ellipses, rectangles, polygons) • Markers • Measuring result (length, cardiothoracic ratio, angle)
Editing selection of measurement results
Selects, moves and edits already input length and heart-toribcage ratio.
Saving measurement results
Saves measurement results.
Length
Measures dimensions of a tumor or the like.
Heart-to-ribcage ratio
Measures the ratio of the widthwise length of the shadow of the heart to that of the ribcage.
Angle measurement
Measures the angle of two line segments, contact or noncontact, for general-purpose use.
Free Drawing
Lines can be drawn freely on the viewer window just as with a pen. The following can be done with this free drawing function. • Selection of the thickness and the color of the lines to be drawn • Capture of the free drawing image (clipboard copy) • Deleting of the drawn lines
Toolbar setting
Customizes the toolbar setting.
Study status setting
Sets “Verify” or “Verification Suspended” individually for each study.
Save
Saves image processing parameter information of a study image that has been subjected to image adjustment processing.
Image display/adjustment Windows pattern change
Changes display pattern of the study window and the image display window.
Display position relocation
Relocates image display positions on the study window.
Displaying maximized images
Displays fully magnified study images on the viewer window.
Feeding display images
Alternately changes display images individually by a patient, a study or an image.
Displaying additional information
Displays additional information of the shown image as an image overlay, and also changes between Display and Hide statuses alternately.
Displaying thumbnails
Displays thumbnails of the shown study images. Also changes between Display and Hide statuses alternately.
Displaying the measured result
Displays the measured result, and also changes between Display and Hide statuses alternately.
Tree view display
Displays listing of patients/studies in a tree view form, and selects from such list a study you wish to display images.
Displaying comparative images
Comparatively displays a currently shown image and the corresponding past image.
Changing gradation
Changes gradation at real-time basis.
Image magnification/image reduction
Displays magnified/reduced images.
Panning
Moves display position of an image to a desired position.
Stack Display
Switches the display image by mouse dragging.
Preset Image Processing
Registers the selected image processing parameters with preset, and changes the preset name or deletes the preset image processing parameters.
Reverse display
Performs reverse displays of an image in relation to its density.
Reset
Resets a display image to a previously stored status.
Rotation • Flipping
Rotates or flips an image.
FCR image processing parameters
Adjusts FCR image processing parameters.
Applying Modality LUT
Applying following Modality LUT according to the modality of each image. • N/A • P-Value • gamma 2.2 • FCR
020-221-02E 01.08.2010 FM5563
Description
CR study linkage function Displaying mis-exposed images
Displays mis-exposed images.
Modify exposure menu
Modifies exposure menus.
Re-exposure
Instructs re-exposure of an image.
Additional exposures
Adds exposure menus in a study.
Replacing images
Replaces study images.
Modifying patient information
Displays/edits patient information.
Setting an output device
Specifies a target destination for image output.
CR-IR 391CL Service Manual
MD-7
MD-8 Function
Description
Image Output Film print
Outputs a film image to a desired printer.
Work disk output
Outputs work media to a desired disk device.
General-purpose file
Outputs a study image in any of the following formats: BITMAP, JPEG and DICOM Stream
Using explanatory description Explanatory description use function Indicator function
Displays the explanatory description use dialog. Indicates the CR-IR 391CL system status according to the following 5 classifications: RU, Disk, Printer, Output Queue condition and Event, and then informs the user of the result of indication.
Indicator Function
Service Utility Function
Description
Service settings Simplified setup wizard
Interactively performs various kinds of settings successively.
System
Performs basic system setups.
Connected equipment
Performs settings for equipment units to be connected to the CR-IR 391CL system.
Linkage function
Performs settings for functions that enable linkage with other systems.
Film annotation characters
Performs settings for character strings to be output on film and the formats necessary for output processing.
Person name
Performs settings necessary for converting an input person name.
Modality setting
Performs LUT setting corresponding to each modality.
Maintenance tool
Description
Indication
Informs the user of the device connectivity and error information by means of putting the related icon on/off or blinking status.
RU status display
Displays status of a connected RU and performs scanner cleaning.
Disk status display
Displays disk status (volume label, application status, usage, write enabled/disabled). *1 Displays listing of disks created as Image storage disks . Performs disk settings.
NAS status display
Displays the following NAS status. Remaining capacity Host name Status (Creating write data/Write enable/Temporarily)
Printer status display
Displays status of connected printers.
Output status display
Displays Output Queue status and performs Output Queue operations, such as deletion, forced output, and other.
Event display
Displays listing of events that occurred in the server, such as error, warning, information and other.
Database Utility
Discards currently used database and restores the stored data, when database files are damaged accidentally or there are inconsistencies between the database and the local images.
Acquiring EDR backup data
Acquires/stores EDR backup data files of the selected local images.
Connection check
Checks connection with the equipment determined according to “Connected equipment” by Service settings.
Log display/edit
Displays or clears off the number of IP exposures.
Event log display
Starts running the Windows XP event viewer for troubleshooting purposes.
*1 Image storage disk In the CR-IR 391CL system, a disk used for storing study result images as originals is denominated an “Image storage disk.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-8
MD-9 User Utility Function
Backup Utility Description
Menu setting
Adds, modifies and deletes exposure menus and study menus.
Information of film annotation character strings
Sets film annotation character strings.
Setting a destination for image output
Performs settings for whether or not to automatically output images after image generation (after completion of exposure), a target destination for image output, and timings for such operations.
Function Backup Patient Information
Patient information database
Setup information
Exposure menu related parameters Image processing parameters System settings (including User Utility related settings) Connection device settings (including automatic output settings) LUT settings Person name format settings Film annotation character related settings User settings Explanatory description settings
Log information
IP counter information Operation log Changed history log Output history log CR-IR 391CL system event log
Sets a function to automatically have a study to be determined when Settings for automatically a certain time period elapses after image generation (after determining a study completion of exposure). Setting to delete images
Sets a function to store images input from an external device for a certain time period, and then deleting those images automatically.
Backup notification setting
Sets a function to display a message prompting the user to make backup copies of the necessary data when such copies are not made for a certain time period.
Settings for displaying additional image information
Sets image information to be displayed as additional image information.
Setting to display a title of respect prefixed to a patient name
Sets a function to add a title of respect when displaying a patient name.
Disk consistency check
Checks if any alteration was made on the Image storage disk*1.
Importing patient database
Registers patient information to the patient database from a file where the patient information is described in the CSV format.
Settings for startup of client’s application
Sets automatic startup of a client after the server application has started running.
History information consistency check
Checks if any alteration was made on the history information file (where the history of login, access to a study, data transfer and data backup is registered).
Automatic logoff setting
Sets whether or not to automatically log off the system when there were no user operations for a certain period of time.
Marker setting
Sets the marker to be added to the image.
Preset setting
Assigns preset settings to the keypad keys.
*1 Image storage disk In the CR-IR 391CL system, a disk used for storing study result images as originals is denominated an “Image storage disk.”
020-221-02E 01.08.2010 FM5563
Description
Restore Patient Information
Patient information database
Menu Setting Information Exposure menu related parameters
System configuration information
System settings (including User Utility related settings) Connection device settings (including automatic output settings) LUT settings Person name format settings Film annotation character related settings Additional information display settings Search parameter settings
User information
User settings
Explanatory information
Explanatory description settings
Log information
IP counter information (service authority only)
Collecting logs for maintenance purpose Menu Setting Information
Exposure menu related parameters Image processing parameters
Setup information
System settings Connection device settings LUT settings Person name format settings Film annotation character related settings Additional information display settings Search parameter settings Directory information
CR-IR 391CL Service Manual
MD-9
MD-10 Function
Description
User information
User settings
Explanatory information
N/A
Log information
IP counter information Operation log Changed history log Output history log CR-IR 391CL system event log Analysis log Windows event log Registry file Image database DDO file
Function
Client Utilities Function
Disk Copy Tool
Description
Description
Specifies a source drive to perform copy processing. Displays process progression status using the progress bar. Window on which copies Enables canceling of copy processing. are made Sets volume label of the copy source as that of the target copy destination, after completion of file copy processing.
Image Output Function
Description
DICOM print output
Generates film printout to a printer connected to the CR-IR 391CL server.
DICOM media storage output
Generates output to a disk device connected to the CR-IR 391CL server. Manually outputs study images transferred from the viewer, in either of the “BITMAP”, “JPEG” or “DICOM Stream” format. Stores images on a DICOM storage device that supports the DICOM communication protocol (service class: CR Image Storage).
Edit patient information.
Registers, edits and deletes patient information.
General-purpose file output
Display of IP use frequency
Displays the IP use count.
DICOM storage output
User registration
Adds and deletes images to be displayed on the user-selected window. For the administrator: Registers, edits and deletes users. Operation authority granted to the user group will be determined.
On the free layout print screen, free layout of images is possible for Free Layout DICOM print output of multiple images to one piece of film. The image size also output can be adjusted.
User editing
Edits the user logged in the system.
Registering explanatory description
N/A
History display
Displays access history and image transfer history.
Disk operation
Performs disk settings, disk registration and disk reconstruction.
Database restoration
Re-registers studies saved on the Image storage disk*1 to the study database.
*1 Image storage disk In the CR-IR 391CL system, a disk used for storing study result images as originals is denominated an “Image storage disk.”
020-221-02E 01.08.2010 FM5563
Image Processing Function
Description
Standardization
Image standardization processing (conversion to a 10bit format file)
EDR processing
Density correction processing (Exposure Data recognizer)
GP processing
Gradation Processing
RP processing
Response Processing
DRC processing
Dynamic Range Control Processing
TAS processing
Tomographic Artifacts Suppression processing
MFP processing
Multi-objective Frequency Processing
FNC processing
Flexible Noise Control processing
GPR processing
Grid Pattern Removal processing (removes moire of the grid without sacrificing the image quality)
CR-IR 391CL Service Manual
MD-10
MD-11 Media Storage
■ PDI (Portable Data for Imaging) Patient CD
Function
Description
Image management
Maintains and manages patient/study/image information that is saved on the disk into the system.
Image update
Adds in-study images and updates information for the images stored on the Image storage disk*1.
Database restoration (Client utilities)
Captures information stored on various disks into the image server and includes such images as those targeted for management.
Disk reconstruction (Client utilities)
If data contained on disks is illegal, subjects DICOMDIR to reconstruction processing based on contents of the files saved on the disks so that those disks can be used properly.
Disk storage (Image output)
Stores images onto several disks.
Image search display (Study list)
Uses the Web browser to display listing of images saved on the image server or disks or images themselves.
Disk alteration check (Client utilities)
Checks if the disks are altered by third parties.
Disk settings (Client utilities)
The user sets whether data is write-enabled or -disabled onto disks.
Function
Image output
Description Writes exposed images and captured images from the outside onto a CD-R and DVD-R. Use this function in a region where patients are required to store images compulsorily or when making referral to hospitals. Conforms to IHE*1 TF Transaction RAD-47 “Distribute Imaging Information on Media”.
*1 IHE : Integrating the Healthcare Enterprise
*1 Image storage disk In the CR-IR 391CL system, a disk used for storing study result images as originals is denominated an “Image storage disk.”
■ General-purpose Image Capture Function
Description
Image capture
This function is available for capture of images derived from connection devices such as digital camera, USB memory, FD/CD/ DVD and other, as well as those located in a folder*1 that can be viewed from My Computer on Windows. A maximum of 50 images can be captured for each study.
Image management
Manages general-purpose images as study images on the CR-IR 391CL.
Image browse
Enables browsing studies that include general-purpose images selected on the study list on the CR-IR 391CL viewer.
Image output
This function enables image output onto a DVD for storage/DVD for operation and general-purpose image output.
*1 To view a folder located on the network, the network drive must be assigned ahead of time.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-11
MD-12
4. Descriptions of Software Control NOTE In this chapter, the "RU Application", "RU IP Address", and "RU Configuration" are referred to shortly as RU-AP, RU IP ADDR, and CONFIGURATION, respectively.
4.1 Data Flow between RU and Console The exchange of data between the RU and Console is described below.
4.1.1 Data Flow during Routine Processing Flow of image data The image data read from the IP is stored in the SDRAM of the CPU board, and transferred to the Console via the network.
Flow of log data The log data is written into the FTP server upon RU shutdown processing or upon occurrence of a FATAL error. The log data is retained in the FTP server until a certain amount of that data is reached, and, once that amount is exceeded, the data is overwritten on a first-in, first-out basis. Console
RU
COMMON
Settable items and default values The settings are made from the RU PC-TOOL. The settable items and their default values are as follows. Setup items
Setting means RU PC-TOOL
172.16.1.10
RU subnet mask
RU PC-TOOL
255.255.0.0
RU default gateway
RU PC-TOOL
172.16.1.0
FTP server IP address
RU PC-TOOL
172.16.1.20
RU secure IP address
RU PC-TOOL
0.0.0.0
RU secure net address
RU PC-TOOL
0.0.0.0
Flow of network setting data The network setting data is not written into the CPU board only by clicking [SET] button on the RU PC-TOOL window. You need click [UPDATE] button to write the network setting data into the CPU board. The contents set from the RU PC-TOOL are stored on the CPU board FLASH ROM. Console
RU
Network setting data
CPU board FLASH ROM
Default values
RU IP address
RU PC-TOOL
Image data FTP server
4.1.2 Flow of Network Setting Data
CPU board FLASH ROM
[SET]
Memory (SDRAM)
[UPDATE]
Network setting data
Image data Log data
Log data
RU-specific data
FRRB102001.ai
FRRB102002.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-12
MD-13 4.2 Error Handling The RU resumes its operation by attempting a retry(s), except under condition where it is inoperable.
■ Error Handling When an I/O error (mechanical, scanner, etc.) occurs between cassette insertion and IP reading, the IP is returned to the cassette.
■ Cases where Retry Is Impossible (FATAL Error) (1) When the function of the CPU board stops. (2) When the power supply voltage output stops.
4.3 What Is Sleep Mode? The "Sleep mode" is such that, in order to save power, the conditions in the machine automatically change to the power-saving mode when the RU is not operated within a specified period of time.
■ Operation in the Sleep Mode Upon entering the Sleep mode, only the power of the CPU board is kept ON, while the power of other components is left OFF. Only the power/erasing mode indicator lamp on the operation panel lights up in green in the Sleep mode.
■ Transition to the Sleep Mode Transition requirements If "Sleep mode ON" is set in the CONFIGURATION and the RU is not operated within the preset "Sleep mode transition time" while the RU remains in READY state, the machine transits to the Sleep mode. The stand-by switch is kept pressed for 4 seconds. When the console is shut down.
Setting the Sleep mode You can specify whether the Sleep mode is to be used and the period of time in which the machine transits to the Sleep mode in the CONFIGURATION. Whether the Sleep mode is to be used Set by the “Sleep mode Change” command in the CONFIGURATION. Time to transit to the Sleep mode Set by the “Sleep Mode Change Time ([min])” command in the CONFIGURATION.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-13
MD-14 ■ Recovery from Sleep Mode Recover requirements Press the stand-by switch.
Processing upon recovery Upon recovery from the Sleep mode, the RU performs a home-positioning operation of the suction arm. In addition, the initial self-diagnosis of the mechanical components takes place, as well as home-positioning of the RU suction arm, under one of the following conditions. The mechanical components are located at other than the home positions. One of sensors detects an IP. A cassette is set in the RU.
4.4 RU Bootup Processing The following self-diagnoses are carried out after the power is turned ON. Connection verification between the RU and the Console is also carried out concurrently with the self-diagnoses.
■ Initialization of the Mechanical Components The initialization of the mechanical components consists of the following five stages.
Before IP search stage The cassette cover opening mechanism is moved to the reference position, and the suction arm is moved to the home position.
IP search stage The motor is rotated by an appropriate amount to convey the IP to a position where it can be confirmed by the sensor, on the assumption that the IP is located at a position where it cannot be detected by the sensor within the machine.
After IP search stage The suction arm is moved to the home position.
Remaining IP ejection stage When an IP is found within the machine during the IP search stage, its size is measured and the IP is returned to the cassette. If a cassette is not set in the RU, the message prompting to set an empty cassette appears.
After remaining IP ejection The self-diagnosis of the cassette cover closing mechanism is carried out, and the cassette hold is released.
■ Initialization of the Scanner Mechanism The scanner mechanism is initialized.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-14
MD-15 4.5 RU Termination Processing Termination processing of the mechanism and the log data storage take place.
NOTE If the power is turned OFF without performing RU shutdown processing, log data will not be saved.
■ Flow of RU Shutdown Processing (1) "Shutdown processing" command Two instructions are available for a case where “system shutdown of the Console is carried out” and a case where “the stand-by switch of the RU is pressed”.
(2) Execute "saving of log data", and turn OFF the power. Saving of log data: Save HISTORY LOG, TRACE LOG, and ERROR LOG to the FTP server.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-15
MD-16 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-16
MD-17 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-17
MD-18 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MD-18
MT-I
CR-IR 391CL Service Manual
MT: Machine Troubleshooting
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-I
MT-II
MT: Machine Troubleshooting
Control Sheet Issue date
Revision number
04/28/2008 01/08/2010
01 02
Reason New release (FM5535) Revision for software V1.1(B) (FM5563) Changes in pagination (FM5563)
020-221-02E 01.08.2010 FM5563
Pages affected All pages 11, 15 to 17, 19 to 23, 28 to 30, Appx MT 1-97 to 348 18, 24 to 27
CR-IR 391CL Service Manual
MT-II
MT-1
1. Error Code Table
Meaning of the event (error code) A five-digit code displayed in the “Event” column implies the following.
For errors occurring while the CR-IR 391CL is being used, take appropriate countermeasures following the error codes (and error messages) listed herein.
A B C C C
When an error occurs, use the event and event source name information to separate the assumed causes.
A : Error-detected process 1: Module used in common in the system/indicator/user authentication/Client Utility 2: Main process/routine/study list 3: Input process/CR study 4: Image browse/acquisition process 5: Output process/media control 6: Backup Utility/User Utility/Service Utility/disk copy tool 9: RU
The event and event source name are displayed in the “Source” and “Event” columns of the Event Viewer main window shown below.
B
See “2. Using the Event Viewer.”
1.1 Referring to Error Messages Event (error code) and event source name
“Source” column
: Error level (See the Table Error Levels.)
CCC : For error level 0 or 1, this section of the error code is provided so that it is unique in the process.
“Event ID” column
00000072.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-1
MT-2 Message
Table Error Levels Error Level 0 : Fatal Error An error that fully disables system operation.
Description A serious, fatal problem that absolutely disables the system’s stable operation. DB access error System file access file error
1: Warning An error that enables the system’s operation to be continued after user intervention.
Inevitably involves user notification and the system operation can be continued by the user intervention. Causes of this error type can be assumed as follows.
2: Warning An error that enables the system’s continuous operation.
A slight error that does not require user notification. The system operation can be continued with no user intervention. The following causes can be assumed.
3 : Information Simple information
Information that the system development section wishes to keep.
9: Logical Error Defective program
An error presumably caused by defective program. Basically, this error does not occur at user’s site. This error type has been aborted by the FPD previously. The following causes can be assumed.
The message is for describing errors and is displayed in the “General” tab of the Event Viewer’s Properties window shown below. “General” tab
Data file access error Disk full Faulty LP board No response from the target destination for connection
Unspecified data entered from networks. (An error implying that the system can be continued being substituted by the default). 00000073.ai
Unspecified value returned from the method Failure in securing memory Failure in acquiring Windows resources Error returned from the Windows API
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-2
MT-3 Identifying the problem cause when two or more errors encountered have the same error code The same error code may appear on the display even when the error cause varies. If you encounter such a situation, note both the error code and error message to identify the error cause. Event 13005
13005
13005
* 13005
13005 13005
Event Source Description Causes FFCustom MsgBox MessageBox Dialog A message box could not be Show Error. displayed. The problem is attributable to resource inadequacy or system instability. FFId Connection Recv The connection to the RU was Watch error(%1).%n[%2] closed or an error occurred in the connection. FFId [%1] failed in the The connection to the display group MenuChange liberating table was not successfully closed. processing of the display group data acquisition FFId It failed that [%1] The “LangStrDB” key was not found PatInfoInput gets the SexMale in Directory.ini or the ID 30705 was caption not registered in the character string data base. FFIdRu Recv error[%1] The connection to the RU was MainControl closed or an error occurred in the connection. FFInput It failed that [%1] The connection character string was connects to STR not properly registered for the DB “LangStrDB” key in Directory.ini.
To identify the error cause, perform the following procedure:
1.
Start the Event Viewer. For details of the startup procedure, see “2.2 Starting the Event Viewer.”
2.
Open the Event Properties window. For details the procedure for opening the above window, see “2.4 Details of Events.”
3.
See both the error code and error message, and then locate the associated error description in “Appendix 1 CR-IR 391CL Error Message Table.” For error messages, see “Appendix 1 CR-IR 391CL Error Message Table.”
Error Message
* There are two or more occurrences of the same error code (event).
Error Code
00000472.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-3
MT-4 1.2 Precautions An error such as incorrectly entered image processing parameters will not be handled as an error.
1.3 Error Message For error messages, see “Appendix 1 CR-IR 391CL Error Message Table.”
An error code starting with “9” (e.g.: 9XXXX) is that generated by the RU. The correlation between the error level (the second digit of an error code number) of CR-IR 391CL-generated errors and that assumed by Windows (Event Viewer) is as follows. Error level
Error level assumed by Windows
0 : Fatal Error
EVENTLOG_ERROR_TYPE
1 : Warning
EVENTLOG_WARNING_TYPE
2 : Warning
EVENTLOG_WARNING_TYPE
3 : Information
EVENTLOG_INFORMATION_TYPE
9 : Logical Error EVENTLOG_ERROR_TYPE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-4
MT-5
2. Using the Event Viewer
2.2 Starting the Event Viewer
The Windows XP Event Viewer is used for checking details of errors occurring with Windows XP or the CR-IR 391CL. How to use the Event Viewer is described herein, together with the startup procedures.
1.
Start up the Service Utility mode. For details of Service Utility mode startup, see “2. Starting, Logging-in to, and Exiting the Service Utility” in “MU: Maintenance Utility.”
The “Service Utility Top” window opens.
2.1 Overview of the Event Viewer A variety of information items, such as resource information, system operation status and application errors occurring with Windows XP, are recorded (logged) to the Event Viewer. Causes of errors that occur can be specified from the following logs. Application Log Security Log System Log The CR-IR 391CL error information is recorded to the Application Log. To display the CR-IR 391CL error information, select the “Application” from the tree menu in the left pane of the Event Viewer main window shown below. MU000001.ai
2.
Click [View Event Log]. The Event Viewer main window opens.
REFERENCE Use the following procedures if you cannot start up the Event Viewer from the Service Utility mode. 00000371.ai
1. From the [Start] menu at the lower left of the desktop window, select “Control Panel” to display the “Control Panel” window. 2. Click “Administrative Tools” to display the “Administrative Tools” window. * If the window is in the Classic View option, double-click the same button. 3. Double-click “Event Viewer.” ➔ The Event Viewer starts up.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-5
MT-6 2.3 Configuration and How to View the Event Viewer Explained herein are the Event Viewer’s screen configuration (shown below) and how to view it.
2.4 Details of Events Described below are the procedures used for checking detailed event information.
1.
On the Event Viewer main window, click “Application” log from the tree menu in the left pane to select it. Event lists appear in the right pane.
2.
A
B
C
D
Double-click the log you wish to display from the event lists that appear.
E 0000375.ai
A Level: Symbol
Meaning
Description Displayed when a fatal error, such as failure in device driver or service startup, or loss of data, occurs while the system is running.
Error
Displayed to indicate that the system has started normally being Information successful in startup of services or remote access. Warning
B C F E
Date and Time Source Event ID Task Category
020-221-01E 04.28.2009 FM5535
00000376.ai
The “Event Properties” window opens.
Displayed to indicate that the Warning can be attributable to the cause of the error that has occurred. Should usually be recorded in the log.
: The date and time when an event occurs. : The application that wrote an event. : Event ID. : Event category.
CR-IR 391CL Service Manual
MT-6
MT-7 3.
2.5 Saving the Event Log
Check detailed information of an event.
How to save event logs is explained below.
NOTE Be sure to have a DOS/V-formatted FD ready to use for saving event logs.
1.
Insert the FD used for saving event logs into the FDD.
2.
From the “Action” menu of the Event Viewer main window, select “Save Events As....”
00000377.ai
4.
Click [OK]. The system returns to the “Event Viewer” window.
00000378.ai
NOTE “Save Events As...” is displayed only when “Application” log is selected from the tree menu in the left pane of the Event Viewer main window. Make sure to have “Application” log be selected on the tree menu. The “Save As” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-7
MT-8 3.
2.6 Deleting the Event Log
Select or enter the following. I.
How to delete event logs is explained below.
1.
From the “Action” menu of the Event Viewer window, select “Clear Log”.
II. 00000380.ai
NOTE 00000379.ai
“Clear Log” is displayed only when “Application” log is selected from the tree menu in the left pane of the Event Viewer main window. Make sure to have “Application” log be selected on the tree menu.
I. Select “3½ Floppy (A:).” II. Enter the filename (e.g.: log).
REFERENCE
A window opens prompting you to confirm the data to be saved.
If “Text (Tab Separation)” is selected for “Save as Type,” event logs can be saved as text files.
4.
Click [Save]. 00000383.ai
The following window opens.
2.
Click [Cancel]. The system returns to the “Event Viewer/Application Log” window, deleting thus all event logs.
00000070.ai
5.
Click [OK]. The system returns to the “Event Viewer/Application Log” window.
6.
00000381.ai
Check to see that the FDD’s access lamp has gone off and remove the FD from FDD.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-8
MT-9 2.7 Quitting the Event Viewer How to quit the Event Viewer is explained below.
1.
Click
of the Event Viewer main window.
The system returns to the “Service Utility” top window.
2.
Click [EXIT] at the upper right corner of the window. The system returns to the desktop window.
2.8 Collecting Logs for Analysis Purposes When an error occurs while the CR-IR 391CL system is being used, collect maintenance logs for the purpose of error analysis.
■ Collecting maintenance logs For details of how to collect maintenance logs, see “■ Collecting logs for maintenance purpose” in “Appendix 1: Backup Utility” under “MU: Maintenance Utility.”
■ Items to check at error occurrence Check the items in the table below and write down the check result accordingly in the notebook. Check item
020-221-01E 04.28.2009 FM5535
Example
1 Precise date of an error occurrence
June 15, 2006
2 Description of an error occurrence
No images are saved on the DVD even at the press of the “Verify” button after image reading.
3 Operation procedure that caused an error occurrence (What did the user manipulate? What occurred with the equipment as a result of such manipulation?)
During User Utility operation, the user accidentally changed setup data of “Setting for automatically determining a study,” which resulted in unselecting “Automatically verifying a study.”
4 Is it reproducible? Is it reproduced if a certain procedure is performed? Is it reproduced if a certain condition results?
Not reproducible.
5 Characteristics
An error caused by a user’s wrong operation. It is inconceivable that a similar error occurs at different institutions because settings are not changed frequently for the item concerned.
6 Actions taken by the service personnel What actions did the service personnel take? When did they take such actions? What are the current conditions?
User Utility settings already changed appropriately at the site concerned on June 27, 2006. It was also confirmed at the site that images are successfully saved onto the DVD. There are no problems at present.
CR-IR 391CL Service Manual
MT-9
MT-10 2.9 Customizing the Event Viewer 1.
3.
Select “Application” from “Windows log” in the left pane and confirm that the display is as shown below.
From the “View” menu of the Event Viewer main window, select “Customize....”
00000603.ai
4. 00000601.ai
Select “System” in the left pane and confirm that the display is as shown below.
The “Customize View” window opens.
2.
Uncheck the check mark of “Action pane” and click [OK].
00000604.ai
5.
Click [x] in the upper-right corner of the Event Viewer main window; then the window closes.
00000602.ai
The system returns to the “Event Viewer” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-10
MT-11
3. Information Useful for Error Recovery 3.1 Collecting Logs for Maintenance Purpose See “■ Collecting logs for maintenance purpose” in “Appendix 1: Backup Utility” under “MU: Maintenance Utility.”
3.2 Error for Not Registering the Client Device If the application is started without executing the service utility after changing the IP address, the following window opens.
MT000093.ai
NOTE In the case of changing the CR-IR 391CL’s own IP address, making an IP address change via the control panel of Windows alone does not affect the setting on the connection destination side. Such a setting will be reflected by opening the “Server equipment settings” window in the Service Utility and then clicking the [OK] button. The setting contents will be registered to the DB when exiting the Service Utility. For the detailed procedures, see “2.3 Making a setting change using the CR-IR 391CL’s Service Utility” of “Appendix 5: Procedures for Changing the CR-IR 391CL and RU IP Addresses” under “MC: Checks, Replacement and Adjustment of Parts.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-11
MT-12
4. Troubleshooting (for DELL PC) The table below summarizes various troubles that may arise with the CR-IR 391CL. In accordance with the encountered trouble, perform a procedure indicated in the “Check Method/Remedies” column. Symptom
Probable Causes
Check Method/Remedies
The PC (Windows XP) does not start up. It is conceivable that the PC’s memory may be defective. Check the PC’s memory. If it is defective, replace it. For the memory check procedure, see “4.8.2 Memory Checks.” The CR-IR 391CL (application) does not start up.
It is conceivable that the application key might not be installed. Error code: [20102] Setup incompleted.
Install the application key.
The connection to the network is not established.
Connect the CR-IR 391CL to the network.
The MAC address is not acquired.
Reinstall the network driver and then update it. For the reinstallation procedure, see “4.10 Tasks to be Performed at Motherboard Replacement.” If the error recurs after the network driver is updated, replace the PC’s motherboard.
It is conceivable that the data stored on the hard disk may be partly damaged.
Check the hard disk. If any error is revealed by the check, perform a procedure for achieving error recovery or replace the hard disk. For the hard disk check procedure, see “4.9 Checking the Hard Disk.”
IIS may not be running. Error code: [20141]
Restart the server computer as follows. 1. From the Start menu, open Control Panel ➔ Administrative Tools ➔ Services. 2. Right-click “IIS Admin” to select Properties. 3. Ensure that “Startup type” on the “General” tab is set to “Automatic.” If the same symptom recurs, reinstall the CR-IR 391CL system. For how to reinstall the system, see “1. Reinstalling the OS and the Application” under “MC: Checks, Replacement and Adjustment of Parts.”
The SQL server may not be running. Error code: [20140]
Start running the SQL server to restart the server application, as follows. 1. From the Start menu, open Control Panel ➔ Administrative Tools ➔ Services. 2. Right-click “IIS Admin” to select Properties. 3. Ensure that “Startup type” on the “General” tab is set to “Automatic.” If the same symptom recurs, reinstall the CR-IR 391CL system. For how to reinstall the system, see “1. Reinstalling the OS and the Application” under “MC: Checks, Replacement and Adjustment of Parts.”
The CR-IR 391CL (application) does not start up.
It is conceivable that the database might not be initialized. The database may have not been initialized though it was necessary to do so at version upgrade or the like.
The communication with the RU or other equipment cannot be established (“ping” does not work).
It is conceivable that the network driver may be defective. Update the network driver software version, as necessary. [System event log: type, error; source, EL90Xbc; event ID, 5001]
020-221-01E 04.28.2009 FM5535
Initialize the database appropriately. For how to initialize the database, see “7.1.3 Initializing the Image Database” under “MU: Maintenance Utility.”
CR-IR 391CL Service Manual
MT-12
MT-13 4.1 Analysis Flow for When Your Computer Does Not Start Q1
Is the power cable connected properly? N
Y
Connect the power cable properly.
Q2 Does the power lamp go on when the computer power button is pressed? N Y
Replace the computer power unit. For how to replace the power unit, see “2.8 Power Supply Unit” under “MC: Checks, Replacement and Adjustment of Parts.”
Q3 Does the power lamp blink yellow when the computer power button is pressed? Y N
Replace the computer power unit. For how to replace the power unit, see “2.8 Power Supply Unit” under “MC: Checks, Replacement and Adjustment of Parts.”
Q4 Does the power lamp light yellow when the computer power button is pressed? Y N
Check CPU and memory. “4.8.4 CPU Checks” “4.8.2 Memory Checks”
Q5 Does the power lamp blink green some times and then go off when the computer power button is pressed? Y Verify condition of the diagnostic lights on the back of the computer. N
4.2 Analysis Flow for When the Monitor Does Not Operate Normally Q1
Is the monitor cable connected properly? N
Y
Connect the monitor cable properly.
Q2 Is the monitor power turned ON? N Y
Turn the monitor power ON.
Q3 Is the VGA connector connected correctly? N Y
Connect the VGA connector correctly.
Q4 Is no error indicated on the diagnostic lights? N Y
Take necessary measures following the error indication. “4.6 Confirming the Diagnostic Lights”
❍ Replace the monitor.
For how to verify condition of the diagnostic lights, see “4.6 Confirming the Diagnostic Lights.”
Q6 Does the power lamp light green when the computer power button is pressed? N Y
Verify condition of the diagnostic lights on the back of the computer. For how to verify condition of the diagnostic lights, see “4.6 Confirming the Diagnostic Lights.”
❍ Check the motherboard. “4.8.5 Motherboard Checks”
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MT-13
MT-14 4.3 Analysis Flow for When the Mouse Does Not Operate Normally Q1
Is the mouse connector connected properly? N
Y
Connect the mouse properly.
Q2 Turn OFF the computer power and connect/disconnect the connector. Does the same error recur even after the computer is restarted? N END Y
4.5 Checking the System Lights The system lights are the power button lights. A problem that occurred in your computer changes status of the lights, as shown in the table below. Power light
N Y
Connect the connector to the proper USB port location.
Solid green
Blinking green
The computer is in a powersaving mode (Microsoft® Windows® XP).
Blinks green several times and then turns off
A configuration error exists.
❍ Replace the mouse.
4.4 Analysis Flow for When the Keyboard Does Not Operate Normally Q1
Is the keyboard connector connected properly? N
Y
Q3 Is the USB port location correct? Confirm the default setup location. N Y
Blinking yellow
Solid green and a beep code during POST(*)
A device on the system board may be faulty or incorrectly installed.
A power supply or motherboard failure has occurred.
A problem was detected while the BIOS was executing.
See the manual provided with the computer.
Press the power button, move the mouse, or press a key on the keyboard to wake the computer. Check Diagnostic Lights to see if the specific problem is identified. For details of the diagnostic lights, see “4.6 Confirming the Diagnostic Lights.”
Check Diagnostic Lights to see if the specific problem is identified. For details of the diagnostic lights, see “4.6 Confirming the Diagnostic Lights.”
Check Diagnostic Lights to see if the specific problem is identified. For details of the diagnostic lights, see “4.6 Confirming the Diagnostic Lights.”
See Beep Codes for instructions on diagnosing the beep code. Also, check the diagnostic lights to see if the specific problem is identified (see Diagnostic Lights). For details of the diagnostic lights, see “4.6 Confirming the Diagnostic Lights.” For details of diagnosis according to the beep codes, see “4.7 Confirmation Required When Beeps Sound at Computer Startup.”
Connect the connector to the proper USB port location.
❍ Replace the keyboard.
020-221-01E 04.28.2009 FM5535
Solid yellow
Connect the keyboard properly.
Q2 Turn OFF the computer power and connect/disconnect the connector. Does the same error recur even after the computer is restarted? N END Y
Suggested Resolution
Power is on, and the computer is operating normally. On the desktop computer, a solid No corrective action is required. green light indicates a network connection.
Q3 Is the USB port location correct? Confirm the default setup location. See the manual provided with the computer.
Problem Description
POST : An automatically run diagnostic program that BIOS loads for the main components.
CR-IR 391CL Service Manual
MT-14
MT-15 Power light Solid green power light and no beep code and no video during POST(*) Solid green power light and no beep code, but the computer locks up during POST(*)
Problem Description The monitor or the graphics card may be faulty or incorrectly installed.
An integrated motherboard device may be faulty.
Suggested Resolution Check Diagnostic Lights to see if the specific problem is identified. For details of the diagnostic lights, see “4.6 Confirming the Diagnostic Lights.”
Check Diagnostic Lights to see if the specific problem is identified.
4.6 Confirming the Diagnostic Lights To help you troubleshoot a problem, your computer has four lights labeled “A,” “B,” “C,” and “D” on the front or back panel. The lights can be off or green. When the computer starts normally, the patterns or codes on the lights change as the boot process completes. CR-IR 391CL
For details of the diagnostic lights, see “4.6 Confirming the Diagnostic Lights.”
POST : An automatically run diagnostic program that BIOS loads for the main components.
Diagnostic lights MT000081.eps
Power light Solid blue Blinking blue
Turn off
Turn off
Solid blue
Light pattern (A B C D)
Problem Description
––––
Normal Normal (Standby mode)
––––
The computer is in a normal “off” condition, or a Plug the computer into a working electrical outlet possible preand press the power button. BIOS failure has occurred.
––G–
A possible system board failure has occurred.
––G–
A possible processor failure Reinstall the processor and restart the computer. has occurred.
Suggested Resolution
None.
Remove the power supply plug of the PC. Wait for 1 minute until the power is discharged, plug the computer into a working electrical outlet and press the power button.
– : OFF G : Green
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-15
MT-16 Power light
Blinking yellow
Solid yellow
Solid yellow Solid blue
Solid blue
Solid yellow
Light pattern (A B C D)
G–G–
GG–G
––GG
Problem Description
A possible system board, power supply unit, or peripheral device failure has occurred.
Suggested Resolution Turn off the PC, leave the power supply plug inserted, and hold the power supply test button on the back side of the power supply device unit. If a LED next to the switch lights up, a possible system board failure has occurred. If not, remove all the internal and external peripheral devices, and hold the power supply test button on the back side of the power supply device unit. if the LED lights up, a possible peripheral device failure has occurred. If the LED still does not light up, remove the PSU connection from the system board, and hold the power button. If the light lights up, a possible system board failure has occurred.
No processor is detected.
Reinstall the processor, and restart the system. If the PC cannot be restarted, inspect for damage on the processor socket.
Memory modules are detected, but a memory failure has occurred.
If you have one memory module installed, reinstall it and restart the computer. If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. If the computer starts normally, reinstall an additional module. Continue until you have identified a faulty module or reinstalled all modules without error. If available, install properly working memory of the same type into your computer. If the computer has a graphics card, remove the card, reinstall it, and then restart the computer. If the problem still exists, install a graphics card that you know works and restart the computer.
–G–G
A possible graphics card failure has occurred.
–GG–
A possible system board or Replace to another working processor. Inspect processor failure for damage on the processor socket. has occurred.
Power light
Solid blue
Solid yellow
Solid blue
Solid yellow
Solid blue
Solid blue
Light pattern (A B C D)
Problem Description
Suggested Resolution
–GG–
A possible floppy or hard drive failure has occurred.
Reseat all power and data cables and restart the computer.
–GGG
A possible BIOS failure has occured, or the BIOS is not detected.
Run the BIOS Recovery utility, wait for recovery completion, and then restart the computer.
–GGG
A possible USB failure has occurred.
Reinstall all USB devices, check cable connections, and then restart the computer.
G–––
A possible system board failure has occurred.
Remove all the internal and external peripheral devices, and start up the PC. After startup, reinstall the peripheral device cards one by one to identify a problematic card.
G–––
No memory modules are detected.
If you have one memory module installed, reinstall it and restart the computer. If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. If the computer starts normally, reinstall an additional module. Continue until you have identified a faulty module or reinstalled all modules without error. If available, install properly working memory of the same type into your computer.
G–G–
Memory modules are detected, but a memory configuration or compatibility error exists.
Ensure that no special memory module/memory connector placement requirements exist. Verify that the memory modules that you are installing are compatible with your computer.
– : OFF G : Green
– : OFF G : Green
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-16
MT-17 Power light
Solid blue
Solid yellow
Solid yellow
Solid yellow
Solid yellow
Light pattern (A B C D)
Problem Description
Suggested Resolution
GGG–
A failure has occurred. This pattern also Ensure that the cables are properly connected to the system board from the hard drive, CD displays when drive, and DVD drive. you enter system setup Check the computer message that appears on your monitor screen. and may not indicate a problem.
G––G
The power supply connecter is not installed properly.
Reinstall the 2 x 2 power supply connector of the power supply unit firmly.
–G––
A possible peripheral device card or system board failure has occurred.
Remove the power supply plug, remove all the peripheral device cards from the PCI and PCI-E slots, and restart the PC. After starts up, turn of the PC again, and reinstall the peripheral device cards one by one to identify a problematic card.
GG––
A possible system board failure has occurred.
Remove all the internal and external peripheral devices, and start up the PC. After startup, reinstall the peripheral device cards one by one to identify a problematic card.
GGG–
A possible coin-cell battery failure has occurred.
Remove the coin-cell battery for 1 minute, reinstall it, and restart the PC.
–––G
A possible BIOS failure has occurred; the computer is in recovery mode.
Run the BIOS Recovery utility, wait for recovery completion, and then restart the computer.
– : OFF G : Green
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-17
MT-18 4.7 Confirmation Required When Beeps Sound at Computer Startup A series of beeps may sound some times consecutively when display of the relevant error message or the problem indication is disabled on the monitor for an error detected at computer startup. Example: One beep + 2 consecutive beeps + 1 beep (beep pattern code: 1-2-1) The beep will sound in different patterns depending on the detected error or problem (Beep code), as shown in the table below. Beep code
Beep code
Cause
4-3-3
Timer-chip counter 2 failure
4-3-4
Time-of-day clock stopped
4-4-1
Serial or parallel port test failure
4-4-2
Failure to decompress code to shadowed memory
4-4-3
Math-coprocessor test failure
4-4-4
Cache test failure
Cause
1-1-2
Microprocessor register failure
1-1-3
NVRAM read/write failure
1-1-4
ROM BIOS checksum failure
1-2-1
Programmable interval timer failure
1-2-2
DMA initialization failure
1-2-3
DMA page register read/write failure
1-3
Video Memory test failure
1-3-1 through 2-4-4 Memory not being properly identified or used 3-1-1
Slave DMA register failure
3-1-2
Master DMA register failure
3-1-3
Master interrupt mask register failure
3-1-4
Slave interrupt mask register failure
3-2-2
Interrupt vector loading failure
3-2-4
Keyboard Controller test failure
3-3-1
NVRAM power loss
3-3-2
Invalid NVRAM configuration
3-3-4
Video Memory test failure
3-4-1
Screen initialization failure
3-4-2
Screen retrace failure
3-4-3
Search for video ROM failure
4-2-1
No timer tick
4-2-2
Shutdown failure
4-2-3
Gate A20 failure
4-2-4
Unexpected interrupt in protected mode
4-3-1
Memory failure above address 0FFFFh
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-18
MT-19 4.8 Error Analysis Tool (Dell Diagnostics) The “Dell OptiPlex ResourceCD”, which comes with the computer, is used as the Error Analysis Tool. The “Dell OptiPlex ResourceCD” includes CD-ROMs that store various kinds of drivers and the CD names differ slightly depending on the computer model used. Items to be checked using the Error Analysis Tool are memory, CPU fan, CPU and motherboard.
4.8.1 Running the Dell Diagnostics Express Test
■ Starting the Error Analysis Tool (Dell Diagnostics)
1.
Turn ON both the monitor and computer power switches. ➔ The computer starts running.
2.
For memory checks, see “4.8.2 Memory Checks.” For CPU fan checks, see “4.8.3 CPU Fan Checks.” For CPU checks, see “4.8.4 CPU Checks.” For motherboard checks, see “4.8.5 Motherboard Checks.”
When “F12 Boot Options” appears at the upper right corner of the window, press the key.
NOTE Unless the key is pressed with the timeliness, the setup window will not be displayed. In such cases, restart the computer and re-perform Step 2. above. ➔ The “Boot Device Menu” window opens. Boot Device Menu
Onboard or USB Floppy Drive SATA0-ST3250310AS Onboard or USB CD-ROM Drive System Setup Diagnostics Use Up/Down arrows to highlight desired item. Use Enter to select highlighted item. MC000108.a
3.
020-221-02E 01.08.2010 FM5563
Insert the “DRIVERS AND UTILITIES” into the DVD drive.
CR-IR 391CL Service Manual
MT-19
MT-20 4.
The “Press a key to start from the CD/DVD” message appears. Press then the key. ➔ The “Choice Action “ window opens.
■ Using the Error Analysis Tool (Dell Diagnostics) Express Test (to be run during regular inspection)
1.
1. Boot from Hard Disk
Click “Test System” on the “Choose An Option” window. ➔ The “Main Menu” window opens.
2. Boot from CD-ROM
2.
Click “Express Test” on the “Main Menu” window.
MT000077.EPS
5.
Press the <1> key. ➔ The “Dell Diagnostics Menu” window opens. Dell Diagnostics Menu [1] [2]
Dell 32-bit Diagnostics for Resource CD (graphical user interface) for: OptiPlex GX620, GX520, EXIT MT000082.EPS
➔ The “Express Test” will start running. (It will take about 10 minutes to complete. The “Success” window opens and after clicking [OK], the system returns to the “Main Menu” window.
Please Enter Selection... MT000021.EPS
6.
Press the <1> key. ➔ Reading of individual modules will start. (It will take about 20 seconds.) After completing module reading, the “Choose An Option” window opens.
020-221-02E 01.08.2010 FM5563
NOTE If the “Error” window opens while the test is being run, a message that includes the relevant error code will appear asking if you wish to continue the test. Click [Yes] to continue to run the test.
CR-IR 391CL Service Manual
MT-20
MT-21 3.
■ Shutting down the Error Analysis Tool (Dell Diagnostics)
Click “Custom Test.” ➔ The “Customize” window opens.
1.
Click the [x] mark at the upper right corner of the window to close the “Customize” window. ➔ The system returns to the “Main Menu” window.
2.
Click the [x] mark at the upper right corner of the window to close the “Main Menu” window. ➔ The computer restarts.
3.
Remove the DVD from the DVD drive.
NOTE
MT000083.EPS
4.
Unless the DVD is removed with the timeliness, the window shown at Step 4. in “■ Starting the Error Analysis Tool (Dell Diagnostics)” will open. In such cases, press the <1> key to restart the computer and then remove the DVD.
Click the “Results” tab on the right-hand side of the window and check to see that all the test items have “Passed” the Express Test.
NOTE In the event of an error occurrence, click the “Errors” tab to check error details and write them down in a notebook. Then, take necessary measures appropriately in accordance with error details.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-21
MT-22 4.8.2 Memory Checks
1.
4.8.3 CPU Fan Checks
Start the Error Analysis Tool (Dell Diagnostics).
1.
For details of the startup procedure, see “■ Starting the Error Analysis Tool (Dell Diagnostics)” in “4.8.1 Running the Dell Diagnostics Express Test.”
2.
Click “Test Memory” on the “Choose An Option” window .
Start the Error Analysis Tool (Dell Diagnostics). For details of the startup procedure, see “■ Starting the Error Analysis Tool (Dell Diagnostics)” in “4.8.1 Running the Dell Diagnostics Express Test.”
2.
Click “Test System” on the “Choose An Option” window. ➔ The “Main Menu” window opens.
3.
Select “Fan” on the “Customize” window and click “Run Tests.”
CBS20009.ai
➔ The test process starts running. After all process finished, “Record the test results. Press a key when finished.” message displayed.
NOTE
MT000083.EPS
It will take about 20 minutes to complete.
➔ The test process will start running. After successfully completing the process, the “Success” window opens.
3.
Check upper-right area of the window to see all the test items have “Passed” the Express test.
4.
Click [OK].
4.
Press key to close the Express Test.
5.
At the completion of the test, click the “Errors” tab to check to see if there were no errors.
In the event of an error occurrence, details of such error will be displayed on the window. Take necessary measures in accordance with on-screen error details.
6.
Shut down the Error Analysis Tool (Dell Diagnostics).
➔ The system returns to the “Choose An Option” window.
5.
Click [Exit]. ➔ The computer restarts.
6.
Remove the DVD from the DVD drive.
020-221-02E 01.08.2010 FM5563
For details of the shutdown procedure, see “■ Shutting down the Error Analysis Tool (Dell Diagnostics)” in “4.8.1 Running the Dell Diagnostics Express Test.”
CR-IR 391CL Service Manual
MT-22
MT-23 4.8.4 CPU Checks
1.
4.8.5 Motherboard Checks
Start the Error Analysis Tool (Dell Diagnostics).
1.
For details of the startup procedure, see “■ Starting the Error Analysis Tool (Dell Diagnostics)” in “4.8.1 Running the Dell Diagnostics Express Test.”
2.
Click “Test System” on the “Choose An Option” window.
For details of the startup procedure, see “■ Starting the Error Analysis Tool (Dell Diagnostics)” in “4.8.1 Running the Dell Diagnostics Express Test.”
2.
Click “Test System” on the “Choose An Option” window. ➔ The “Main Menu” window opens.
➔ The “Main Menu” window opens.
3.
Start the Error Analysis Tool (Dell Diagnostics).
Select “Processor” on the “Customize” window and click “Run Tests.”
3.
Select “System Board” on the “Customize” window and click “Run Tests.”
MT000083.EPS MT000083.EPS
➔ The test process will start running. After successfully completing the process, the “Success” window opens.
➔ The test process will start running. After successfully completing the process, the “Success” window opens.
4.
Click [OK].
4.
Click [OK].
5.
At the completion of the test, click the “Errors” tab to check to see if there were no errors.
5.
In the event of an error occurrence, details of such error will be displayed on the window. Take necessary measures in accordance with on-screen error details.
At the completion of the test, click the “Errors” tab to check to see if there were no errors.
In the event of an error occurrence, details of such error will be displayed on the window. Take necessary measures in accordance with on-screen error details.
6.
Shut down the Error Analysis Tool (Dell Diagnostics).
6.
Shut down the Error Analysis Tool (Dell Diagnostics).
For details of the shutdown procedure, see “■ Shutting down the Error Analysis Tool (Dell Diagnostics)” in “4.8.1 Running the Dell Diagnostics Express Test.” 020-221-02E 01.08.2010 FM5563
For details of the shutdown procedure, see “■ Shutting down the Error Analysis Tool (Dell Diagnostics)” in “4.8.1 Running the Dell Diagnostics Express Test.”
CR-IR 391CL Service Manual
MT-23
MT-24 4.
4.9 Checking the Hard Disk 1.
Start up Windows and Select “Computer” from the
2.
Select hard disk drive (Local Disk (C:)) and click “Properties”.
Verify that the check boxes in the “Check disk options” area are unchecked, and then click [Start].
menu.
CBS20003.ai
The hard disk check starts. If the hard disk is found to have no problems, a window showing that the hard disk check has been fully completed will open.
5.
Click [Close].
CBS20001.ai
➔ The “Local Disk (C:) Properties” window opens.
3.
Choose the “Tools” tab. In the “Error-checking” area, click [Check Now]. CBS20004.ai
CBS20002.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-24
MT-25 4.10 Tasks to be Performed at Motherboard Replacement When the motherboard was replaced due, for example, to an error occurring with the PC main unit, all the option functions become inactivated consequently. In such cases, the related option keys must be reinstalled so that the inactivated option functions are activated properly. (Such reinstallation processing includes that to be performed so that the option key which activates the standard function is installed from the standard kit CD.)
■ Overall operation flow and detailed work procedure
4.10.1 Installation Work
■ Installation of the standard function option keys
1.
Insert the standard kit CD into the DVD drive.
2.
Select “Computer” from the
menu.
➔ The “Computer” window opens.
3.
Right-click the drive into which the standard kit CD was inserted and select “Open.”
4.10.1 Installation Work ■ Installation of the standard function option keys ■ Option key installation ■ AP key reinstallation
4.10.2 Checkup Work ■ Checking the CR-IR 391CL system for its normal startup ■ Checking if the option functions are activated
CBS20005.ai
➔ The content of the standard kit CD opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-25
MT-26 4.
Confirm that installers for the following option keys are available. Execution file name
6.
➔ The installation processing finish window opens.
Function
OptionGPR
GPR image processing
OptionHQ
HQ image input
OptionFNC
FNC image processing
Click [Continue].
CBS20008.ai
7.
Click [OK]. ➔ The system returns to the standard kit CD window.
CBS20006.ai
5.
Double-click
8.
Repeat steps 6. through 8. to install all other option keys than
9.
Click the
button at the upper right corner of the window to close it.
■ Option key installation Besides the functions available as the standard, install all the option keys that the institution purchased for its system.
.
➔ The installation processing start window opens.
For details of the necessary procedure, see “Appendix 3: Option Key / AP Key Installation” under “MC: Checks, Replacement and Adjustment of Parts.”
■ AP key reinstallation Reinstall the AP key accordingly.
NOTE CBS20007.ai
Reinstall the AP key after all the option keys have been installed appropriately. The reason is that installing the option keys disables the installed AP key, requiring it to be reinstalled anew. For details of the necessary procedure, see “Appendix 3: Option Key / AP Key Installation” under “MC: Checks, Replacement and Adjustment of Parts.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-26
MT-27 4.10.2 Checkup Work
■ Checking the CR-IR 391CL system for its normal startup Use the procedure below to check that the CR-IR 391CL starts up normally.
1. 2.
Use the check list below to make sure that the installed option functions are activated appropriately. Option name
Restart the PC. ➔ The CR-IR 391CL starts up automatically.
The “Service Utility Top” window opens.
Click [View Event Log]. The Event Viewer main window opens.
REFERENCE
Check details
Remarks
MFP Key Software
Start up the User Utility. Make sure that the Available only on the “MFP” item appears on the “Image system where the Processing Parameter Window” selected option key is installed. from the “Exposure Menu Setup Window.”
DICOM Print Key Software
Make sure that the “Film print” item appears to the right of the Study List window.
Available only on the system where the option key is installed.
Free Layput Print Key Software
Make sure that the “Freelayout” item appears to the right of the Study List window.
Available only on the system where the option key is installed.
DICOM Standard CR Storage Key Software
Make sure that the “DICOM Transfer” item appears to the right of the Study List window.
Available only on the system where the option key is installed.
Start up the Service Utility mode. For details of Service Utility mode startup, see “2. Starting, Logging-in to, and Exiting the Service Utility” in “MU: Maintenance Utility.”
3.
■ Checking if the option functions are activated
Use the following procedures if you cannot start up the Event Viewer from the Service Utility mode. 1. From the [Start] menu at the lower left of the desktop window, select “Control Panel” to display the “Control Panel” window. 2. Click “Administrative Tools” to display the “Administrative Tools” window. * If the window is in the Classic View option, double-click the same button. 3. Double-click “Event Viewer.” ➔ The Event Viewer starts up.
4.
Make sure that no errors are recorded in the event log. For configuration of the Event Viewer and how to view it, see “2.3 Configuration and How to View the Event Viewer.”
5.
Click the button at the upper right corner of the window to close the Event Viewer main window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-27
MT-28 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-28
MT-29 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-29
MT-30 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MT-30
Appx MT 1-1
Appendix 1 CR-IR 391CL Error Message Table Event
Event Source
Description
Causes
Remedies
Remarks
1
VBRuntime
The VBA Application identified by the event source logged this Application IIPMAIN: Thread ID: %1, Logged: IIPMAIN is Normal Terminated.
The main process terminated normally.
3
IAANTmon
RAID1 Volume “XXXXXX” changed from a Rebuilding state to Normal state
One of the two HDDs constituting RAID1 became defective.
Replace the defective HDD by performing the RAID HDD replacement procedure.
A RAID volume name used when a “XXXXXX”=RAID volume was created.
3
IAANTmon
RAID 1 Volume “XXXXXX” changed from a Normal State to Degraded, Missing Disks State
One of the two HDDs constituting RAID1 became defective. The defective HDD was replaced. RAID1 was completely rebuilt.
Nothing particular.
A RAID volume name used when a “XXXXXX”=RAID volume was created.
4
IAANTmon
RAID1 Volume “XXXXXX” is in a Rebuilding state
One of the two HDDs constituting RAID1 Nothing particular. became defective. The defective HDD was replaced.
2071
OutImgPrc
FileTransferCom CoCreateInstance Failed.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
2072
OutImgPrc
COM Initialize Failed.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
2073
OutImgPrc
DownloadFile Failed.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
2074
OutImgPrc
DownloadFile some other Exception.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
A RAID volume name used when a “XXXXXX”=RAID volume was created.
An attempt to access a database failed. The probable causes are as follows: The search/update process was not successfully performed for the database. An exclusive process was not successfully performed. An attempt to access a file failed.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
The program might be faulty. Check the operations performed before and after the error occurrence, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
10101 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not Open Indicator-Utility (Server not alive).
The server application is not running.
Start the server application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
10101 FFCustomMsgBox
Communication with the server computer resulted in a failure.
Restart the server computer.
10102 FFCustomMsgBox
An unknown error occurred.
Restart the server computer.
020-221-01E 04.28.2009 FM5535
Remedies
CR-IR 391CL Service Manual
Remarks
Appx MT 1-2
Appx MT 1-3 Event
Event Source
Description
Causes
Remedies
10105 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not Open Indicator-Utility (User authentication failed).
The system has not been logged on.
10105 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10106 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not get RU-device-info from database (Server not alive).
The server application is not running.
10106 FFCustomMsgBox
Communication with the server computer resulted in a failure.
10107 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get RU-device-info from database (User authentication failed).
The system has not been logged on.
10107 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
020-221-01E 04.28.2009 FM5535
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Start the server application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
CR-IR 391CL Service Manual
Appx MT 1-3
Appx MT 1-4 Event
Event Source
Description
Causes
Remedies
10108 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not send response to RUerror-dialog (Server not alive).
10108 FFCustomMsgBox
Communication with the server computer resulted in a failure.
10109 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not send response to RUerror-dialog (User authentication failed).
The system has not been logged on.
10109 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10110
FCRWeb
ErrorCode:%1%nSubSystem:%2 The server application is not running. %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not register RU-controlcommand to database (Server not alive).
Start the server application.
10110
FFCustomMsgBox
Communication with the server computer resulted in a failure.
Restart the server computer.
020-221-01E 04.28.2009 FM5535
The server application is not running.
Start the server application.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Appx MT 1-4
Appx MT 1-5 Event
Event Source
Description
Causes
Remedies
10111
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not register RU-controlcommand to database (User authentication failed).
The system has not been logged on.
10111
FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10112
FCRWeb
ErrorCode:%1%nSubSystem:%2 The server application is not running. %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not get RU-control-result from database (Server not alive).
Start the server application.
10112
FFCustomMsgBox
Communication with the server computer resulted in a failure.
Restart the server computer.
10113
FCRWeb
ErrorCode:%1%nSubSystem:%2 The system has not been logged on. %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get RU-control-result from database (User authentication failed).
10113
FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10120 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10122 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
020-221-01E 04.28.2009 FM5535
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
CR-IR 391CL Service Manual
Appx MT 1-5
Appx MT 1-6 Event
Event Source
Description
Causes
Remedies
10125 FFCustomMsgBox
You are not authorized to perform this operation.
10130 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not get media-list-info from database (Server not alive).
10130 FFCustomMsgBox
Communication with the server computer resulted in a failure.
10131 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get media-list-info from database (User authentication failed).
The system has not been logged on.
10131 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10132 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not get media-status from database (Server not alive).
The server application is not running.
10132 FFCustomMsgBox
Communication with the server computer resulted in a failure.
020-221-01E 04.28.2009 FM5535
Remarks
Log onto the system with a properly authorized user name to retry this operation. The server application is not running.
Start the server application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Start the server application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-6
Appx MT 1-7 Event
Event Source
Description
Causes
Remedies
10133 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get media-status from database (User authentication failed).
The system has not been logged on.
10133 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10138 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not get printer-info from database (Server not alive).
The server application is not running.
10138 FFCustomMsgBox
Communication with the server computer resulted in a failure.
10139 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get printer-info from database (User authentication failed).
The system has not been logged on.
10139 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
020-221-01E 04.28.2009 FM5535
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
CR-IR 391CL Service Manual
Appx MT 1-7
Appx MT 1-8 Event
Event Source
Description
Causes
Remedies
Remarks
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
10142 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not get output-queue-info from database (Server not alive).
10142 FFCustomMsgBox
Communication with the server computer resulted in a failure.
10143 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get output-queue-info from database (User authentication failed).
The system has not been logged on.
10143 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10144 FCRWeb
ErrorCode:%1%nSubSystem:%2 The system has not been logged on. %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not operate the output-queue (User authentication failed).
10144 FFCustomMsgBox
Communication with the server computer resulted in a failure.
020-221-01E 04.28.2009 FM5535
The server application is not running.
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other) Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-8
Appx MT 1-9 Event
Event Source
Description
Causes
Remedies
Remarks
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
10145 FCRWeb
ErrorCode:%1%nSubSystem:%2 The server application is not running. %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not operate the output-queue (Server not alive).
10145 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10151 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not get the specified eventinfo (Server not alive).
The server application is not running.
10151 FFCustomMsgBox
Communication with the server computer resulted in a failure.
10152 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get the specified eventinfo (User authentication failed).
The system has not been logged on.
10152 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
020-221-01E 04.28.2009 FM5535
Start the server application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
CR-IR 391CL Service Manual
Appx MT 1-9
Appx MT 1-10 Event
Event Source
Description
Causes
Remedies
10153 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not update the status of specified event-info (Server not alive).
10153 FFCustomMsgBox
Communication with the server computer resulted in a failure.
10154 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not update the status of specified event-info (User authentication failed).
The system has not been logged on.
10154 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10159 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nServer process error: Can not call operation-log writer (Server not alive).
The server application is not running.
020-221-01E 04.28.2009 FM5535
The server application is not running.
Start the server application.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Appx MT 1-10
Appx MT 1-11 Event
Event Source
Description
Causes
Remedies
Remarks
10160 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not call operation-log writer (User authentication failed).
The system has not been logged on.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
10195 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not Open Indicator-Utility (Other user login).
You have been logged off the system.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
10195 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10196 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not Open Indicator-Utility (Authority is nothing).
The current user does not have operating privilege.
10196 FFCustomMsgBox
You are not authorized to perform this operation.
10197 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get RU-device-info from database (Other user login).
020-221-01E 04.28.2009 FM5535
Log in as a user with operating privileges, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log onto the system with a properly authorized user name to retry this operation. You have been logged off the system.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-11
Appx MT 1-12 Event
Event Source
Description
Causes
Remedies
10197 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10198 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get RU-device-info from database (Authority is nothing).
The current user does not have operating privilege.
10198 FFCustomMsgBox
You are not authorized to perform this operation.
10199 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not send response to RUerror-dialog (Other user login).
You have been logged off the system.
10199 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10200 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not send response to RUerror-dialog (Authority is nothing).
The current user does not have operating privilege.
10200 FFCustomMsgBox
You are not authorized to perform this operation.
020-221-01E 04.28.2009 FM5535
Log in as a user with operating privileges, and then retry.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log onto the system with a properly authorized user name to retry this operation. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Log in as a user with operating privileges, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Log onto the system with a properly authorized user name to retry this operation.
CR-IR 391CL Service Manual
Appx MT 1-12
Appx MT 1-13 Event
Event Source
Description
Causes
Remedies
10203 FCRWeb
ErrorCode:%1%nSubSystem:%2 You have been logged off the system. %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not register RU-controlcommand to database (Other user login).
10203 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10204 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not register RU-controlcommand to database (Authority is nothing).
The current user does not have operating privilege.
10204 FFCustomMsgBox
You are not authorized to perform this operation.
10205 FCRWeb
ErrorCode:%1%nSubSystem:%2 You have been logged off the system. %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get RU-control-result from database (Other user login).
10205 FFCustomMsgBox
You have been logged off the system.
10206 FCRWeb
ErrorCode:%1%nSubSystem:%2 The current user does not have operating %nSourceFile: %3%nSpotCode: privilege. %4%nAuthentication error: Can not get RU-control-result from database (Authority is nothing).
Log in as a user with operating privileges, and then retry.
10206 FFCustomMsgBox
You are not authorized to perform this operation.
Log onto the system with a properly authorized user name to retry this operation.
020-221-01E 04.28.2009 FM5535
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log in as a user with operating privileges, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log onto the system with a properly authorized user name to retry this operation. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
You were logged off during an operation, or Retry logging onto the system. not logged in.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-13
Appx MT 1-14 Event
Event Source
Description
Causes
Remedies
10207 FFCustomMsgBox
Image Reader operation has been canceled.
10208 FFCustomMsgBox
Image Reader operation ended abnormally.
10209 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not open Media-utility windows (Other user login).
You have been logged off the system.
10209 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10210 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not open Media-utility windows (Authority is nothing).
The current user does not have operating privilege.
10210 FFCustomMsgBox
You are not authorized to perform this operation.
10211
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get media-status from database (Other user login).
You have been logged off the system.
10211
FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
020-221-01E 04.28.2009 FM5535
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log in as a user with operating privileges, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log onto the system with a properly authorized user name to retry this operation. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-14
Appx MT 1-15 Event
Event Source
Description
Causes
Remedies
10212 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get media-status from database (Authority is nothing).
10212 FFCustomMsgBox
You are not authorized to perform this operation.
10213 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get printer-info from database (Other user login).
You have been logged off the system.
10213 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
10214 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get printer-info from database (Authority is nothing).
The current user does not have operating privilege.
10214 FFCustomMsgBox
You are not authorized to perform this operation.
10215 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get output-queue-info from database (Other user login).
You have been logged off the system.
10215 FFCustomMsgBox
You have been logged off the system.
You were logged off during an operation, or Retry logging onto the system. not logged in.
020-221-01E 04.28.2009 FM5535
The current user does not have operating privilege.
Log in as a user with operating privileges, and then retry.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log onto the system with a properly authorized user name to retry this operation. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log in as a user with operating privileges, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log onto the system with a properly authorized user name to retry this operation. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-15
Appx MT 1-16 Event
Event Source
Description
Causes
Remedies
10216 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not get output-queue-info from database (Authority is nothing).
10216 FFCustomMsgBox
You are not authorized to perform this operation.
10217 FCRWeb
ErrorCode:%1%nSubSystem:%2 You have been logged off the system. %nSourceFile: %3%nSpotCode: %4%nAuthentication error: Can not operate the output-queue (Other user login).
10217 FFCustomMsgBox
You have been logged off the system.
10218 FCRWeb
ErrorCode:%1%nSubSystem:%2 The current user does not have operating %nSourceFile:%3%nSpotCode: privilege. %4%nAuthentication error: Can not operate the output-queue (Authority is nothing).
Log in as a user with operating privileges, and then retry.
10218 FFCustomMsgBox
You are not authorized to perform this operation.
Log onto the system with a properly authorized user name to retry this operation.
10220 FCRWeb
ErrorCode:%1%nSubSystem:%2 You have been logged off the system. %nSourceFile:%3%nSpotCode:% 4%nAuthentication error: Can not get the specified eventinfo (Other user login).
10220 FFCustomMsgBox
You have been logged off the system.
020-221-01E 04.28.2009 FM5535
The current user does not have operating privilege.
Log in as a user with operating privileges, and then retry.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Log onto the system with a properly authorized user name to retry this operation. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
You were logged off during an operation, or Retry logging onto the system. not logged in. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
You were logged off during an operation, or Retry logging onto the system. not logged in.
CR-IR 391CL Service Manual
Appx MT 1-16
Appx MT 1-17 Event
Event Source
Description
Causes
Remedies
10221 FCRWeb
ErrorCode:%1%nSubSystem:%2 The current user does not have operating %nSourceFile:%3%nSpotCode:% privilege. 4%nAuthentication error: Can not get the specified eventinfo (Authority is nothing).
Log in as a user with operating privileges, and then retry.
10221 FFCustomMsgBox
You are not authorized to perform this operation.
Log onto the system with a properly authorized user name to retry this operation.
10222 FCRWeb
ErrorCode:%1%nSubSystem:%2 You have been logged off the system. %nSourceFile:%3%nSpotCode:% 4%nAuthentication error: Can not update the status of specified event-info (Other user login).
10222 FFCustomMsgBox
You have been logged off the system.
10223 FCRWeb
ErrorCode:%1%nSubSystem:%2 The current user does not have operating %nSourceFile:%3%nSpotCode:% privilege. 4%nAuthentication error: Can not update the status of specified event-info (Authority is nothing).
Log in as a user with operating privileges, and then retry.
10223 FFCustomMsgBox
You are not authorized to perform this operation.
Log onto the system with a properly authorized user name to retry this operation.
10229 FCRWeb
ErrorCode:%1%nSubSystem:%2 The database was not successfully %nSourceFile:%3%nSpotCode:% connected. The database might not be 4%nIt failed to get RU-device-Info. running. Can not connect to database. Please reboot Server-computer.
Restart both the server PC and client PC.
020-221-01E 04.28.2009 FM5535
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
You were logged off during an operation, or Retry logging onto the system. not logged in.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-17
Appx MT 1-18 Event
Event Source
Description
Causes
Remedies
10229 FFCustomMsgBox
Acquisition of Image Reader status information resulted in a failure.
10230 FCRWeb
ErrorCode:%1%nSubSystem:%2 The database was not successfully %nSourceFile:%3%nSpotCode:% connected. The database might not be 4%nIt failed to send response to running. RU-error-dialog. Can not connect to database. Please reboot Server-computer.
Restart both the server PC and client PC.
10230 FFCustomMsgBox
A failure occurred when trying to respond to the Image Reader.
Restart the server computer.
10231 FCRWeb
ErrorCode:%1%nSubSystem:%2 The database was not successfully %nSourceFile:%3%nSpotCode:% connected. The database might not be 4%nIt failed to get RU-controlrunning. result. Can not connect to database. Please reboot Server-computer.
Restart both the server PC and client PC.
10231 FFCustomMsgBox
An error occurred while monitoring A database access error occurred. Image Reader operation status.
Restart the server computer.
10232 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to establish the connection to a Restart both the server PC and client PC. %nSourceFile:%3%nSpotCode:% database failed. The database might not 4%nIt failed to delete RU-control- be running. record. Can not connect to database. Please reboot Server-computer.
10232 FFCustomMsgBox
An error occurred while monitoring A database access error occurred. Image Reader operation status.
Restart the server computer.
10233 FCRWeb
ErrorCode:%1%nSubSystem:%2 The database was not successfully %nSourceFile:%3%nSpotCode:% connected. The database might not be 4%nIt failed to release RUrunning. exclusive-info. Can not connect to database. Please reboot Server-computer.
Restart both the server PC and client PC.
020-221-01E 04.28.2009 FM5535
A database access error occurred.
A database access error occurred.
Remarks
Restart the server computer.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-18
Appx MT 1-19 Event
Event Source
Description
Causes
Remedies
10233 FFCustomMsgBox
An error occurred while monitoring A database access error occurred. Image Reader operation status.
Restart the server computer.
10234 FCRWeb
ErrorCode:%1%nSubSystem:%2 IP address padding failed due to an %nSourceFile:%3%nSpotCode:% exception error. 4%nPadding of IP-address is failed. Please call to service.
Restart. If the same symptom recurs, perform a reinstallation.
10234 FFCustomMsgBox
An error occurred while monitoring A database access error occurred. Image Reader operation status.
Restart the server computer.
10235 FCRWeb
ErrorCode:%1%nSubSystem:%2 The database was not successfully %nSourceFile:%3%nSpotCode:% connected. The database might not be 4%nIt failed to get RU-innerrunning. information. Can not connect to database. Please reboot Server-computer.
Restart both the server PC and client PC.
10235 FFCustomMsgBox
A failure occurred in Image Reader operation.
Restart the server computer.
10236 FCRWeb
ErrorCode:%1%nSubSystem:%2 The database was not successfully %nSourceFile:%3%nSpotCode:% connected. The database might not be 4%nIt failed to get RU-exclusive- running. info. Can not connect to database. Please reboot Server-computer.
Restart both the server PC and client PC.
10236 FFCustomMsgBox
A failure occurred in Image Reader operation.
Restart the server computer.
10237 FCRWeb
ErrorCode:%1%nSubSystem:%2 The database was not successfully %nSourceFile:%3%nSpotCode:% connected. The database might not be 4%nIt failed to register RU-control. running. Can not connect to database. Please reboot Server-computer.
020-221-01E 04.28.2009 FM5535
A database access error occurred.
A database access error occurred.
Restart both the server PC and client PC.
CR-IR 391CL Service Manual
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-19
Appx MT 1-20 Event
Event Source
Description
Causes
Remedies
10237 FFCustomMsgBox
A failure occurred in Image Reader operation.
A database access error occurred.
10238 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nIt failed to get Media-deviceinfo. Can not connect to database. Please reboot Server-computer.
An attempt to establish the connection to a Restart both the server PC and client PC. database failed. The problem is attributable to a database timeout or other database error.
10238 FFCustomMsgBox
An error occurred in an attempt to A database access error occurred. acquire disk information.
10239 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nIt failed to get Media-list. Can not connect to database. Please reboot Server-computer.
10239 FFCustomMsgBox
An error occurred in an attempt to A database access error occurred. acquire disk information.
10240 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to establish the connection to a Restart both the server PC and client PC. %nSourceFile:%3%nSpotCode:% database failed. The database might be 4%nIt failed to get Printer-device- inactive. info. Can not connect to database. Please reboot Server-computer.
10240 FFCustomMsgBox
A failure occurred in an attempt to A database access error occurred. acquire printer information.
10241 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to establish the connection to a Restart both the server PC and client PC. %nSourceFile:%3%nSpotCode:% database failed. The database might not 4%nIt failed to get Output-queue- be running. info. Can not connect to database. Please reboot Server-computer.
020-221-01E 04.28.2009 FM5535
Remarks
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
An attempt to establish the connection to a Restart both the server PC and client PC. database failed. The problem is attributable to a database timeout or other database error.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-20
Appx MT 1-21 Event
Event Source
Description
Causes
Remedies
10241 FFCustomMsgBox
A failure occurred in an attempt to A database access error occurred. acquire unprinted image information.
10242 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to establish the connection to a Restart both the server PC and client PC. %nSourceFile:%3%nSpotCode:% database failed. The Directory.ini file might 4%nIt failed to control Outputbe damaged. queue-info. Can not connect to database. Please reboot Server-computer.
10242 FFCustomMsgBox
Operation of unoutputted images failed.
10243 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to establish the connection to a Restart both the server PC and client PC. %nSourceFile:%3%nSpotCode:% database failed. The database might not 4%nIt failed to get Event-info. be running. Can not connect to database. Please reboot Server-computer.
10243 FFCustomMsgBox
A failure occurred in an attempt to A database access error occurred. acquire event information.
10244 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to establish the connection to a Restart both the server PC and client PC. %nSourceFile:%3%nSpotCode:% database failed. The database might not 4%nIt failed to update Event-info. be running. Can not connect to database. Please reboot Server-computer.
10244 FFCustomMsgBox
Operation of unoutputted images failed.
A database access error occurred.
10245 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nIt failed to get Media-devicename. Please call to service.
An attempt to establish the connection to a Restart both the server PC and client PC. database failed. The problem is attributable to a database timeout or other database error.
020-221-01E 04.28.2009 FM5535
A database access error occurred.
Remarks
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-21
Appx MT 1-22 Event
Event Source
Description
Causes
Remedies
10245 FFCustomMsgBox
A failure occurred in an attempt to An error occurred when an attempt was acquire disk information. made to acquire disk information.
Restart the server computer.
10246 FCRWeb
ErrorCode:%1%nSubSystem:%2 The equipment ID is not registered. %nSourceFile:%3%nSpotCode:% 4%nIt failed to get Media-devicename. Can not find Media-device-name. Please call to service.
With the Service Utility, register the equipment ID.
10246 FFCustomMsgBox
A failure occurred in an attempt to An error occurred when an attempt was acquire disk information. made to acquire disk information.
10247 FFCustomMsgBox
The server device could not be accessed.
10300 FFCustomMsgBox
An unknown error occurred.
Restart the server computer.
10300 UserAuth
ErrorCode:%1%nSubSystem:%2 An unknown error occurred during %nSourceFile:%3%nSpotCode:% initialization process. 4%nUnknown Error.
Restart. If the same symptom recurs, perform a reinstallation.
10301 FFCustomMsgBox
User authentication failed.
● Restart the server computer and retry. ● Contact your service engineer if the same symptom recurs even after it has been restarted.
10400 FCRWeb
ErrorCode:%1%nSubSystem:%2 The character string database (API) was %nSourceFile:%3%nSpotCode:% not successfully accessed. 4%nIt failed in character string DB (API) access.
Restart. If the same symptom recurs, perform a reinstallation.
10400 FFCustomMsgBox
An attempt to acquire character strings resulted in a failure.
020-221-01E 04.28.2009 FM5535
In an environment with multiple client computers connected, this can occur when the server load is high and indicator operation is performed.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Retry the operation. If the problem is not resolved, check the network connection.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The problem is attributable to the character string database.
CR-IR 391CL Service Manual
Appx MT 1-22
Appx MT 1-23 Event
Event Source
Description
Causes
Remedies
10401 FCRWeb
ErrorCode:%1%nSubSystem:%2 The system setting database (API) was not There is no operational problem (garbled %nSourceFile:%3%nSpotCode:% successfully accessed. characters may be displayed). If you feel 4%nIt failed in system construction uncomfortable, reinstall the CR-IR 391CL. DB (API) access.
10401 FFCustomMsgBox
Failed in accessing the system setup database.
10402 FCRWeb
ErrorCode:%1%nSubSystem:%2 The startup information is incorrect. %nSourceFile:%3%nSpotCode:% 4%nStart information is not correct.
Restart. If the same symptom recurs, perform a reinstallation.
10402 FFCustomMsgBox
System startup failed.
Retry.
10403 FCRWeb
ErrorCode:%1%nSubSystem:%2 The current user does not have operating %nSourceFile:%3%nSpotCode:% privilege. 4%nThere is no operation authority.
Log in as a user with operating privileges, and then retry.
10403 FFCustomMsgBox
You are not authorized to perform this operation.
Log onto the system with a properly authorized user name to retry this operation.
10404 FCRWeb
ErrorCode:%1%nSubSystem:%2 You have been logged off the system. %nSourceFile:%3%nSpotCode:% 4%nIt was logoffed.
Log in as a user with operating privileges, and then retry.
10404 FFCustomMsgBox
You have been logged off the system.
020-221-01E 04.28.2009 FM5535
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The problem is attributable to the system setting database. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
You were logged off during an operation, or Retry logging onto the system. not logged in.
CR-IR 391CL Service Manual
Appx MT 1-23
Appx MT 1-24 Event
Event Source
Description
Causes
Remedies
10625 FFCustomMsgBox
Disk replacement failed.
10700 GeneralImageInfo AccessCom
Illegal parameter received.
An illegal parameter was received.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
10701 GeneralImageInfo AccessCom
Create Instance Error.
The instance generation process was not successfully performed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
10702 GeneralImageInfo AccessCom
Create Instance Error.
The instance generation process was not successfully performed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
10703 GeneralImageInfo AccessCom
File access error.
An attempt to access a file failed.
Check that the specified image file exists. Also, check that the image file contains a proper endoscope image (JPEG lossy). If the specified image file exists and contains a proper endoscope image (JPEG lossy), restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
10704 GeneralImageInfo AccessCom
Release Instance Error.
The instance release process was not successfully performed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-01E 04.28.2009 FM5535
Remarks
● Restart the server computer. ● Contact your service engineer if the same symptom recurs even after it has been restarted.
CR-IR 391CL Service Manual
Appx MT 1-24
Appx MT 1-25 Event
Event Source
Description
Causes
Remedies
10705 GeneralImageInfo AccessCom
Non-support image file.
An illegal image file was loaded.
Check that the image file contains a proper endoscope image (JPEG lossy). If the image file contains a proper endoscope image (JPEG lossy), restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
10710 FFPresetData AccessCom
ErrorCode: 9999 SourceFile: CPreset.cs Function: 01 SpotCode: x System Error
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
10900 FFInputEz
%1 : Registry Value Get/Set Error Information was not successfully acquired [Key] %2 from the registry. [Exp] %3 %4 %5
%1 : Database Data Get/Set Error A database information acquisition or [DB] %2 storage failed. [Table] %3 [Field] %4 [Exp] %5
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
10903 FFInputEz
%1 : DDO Data Get/Set Error [Tag] %2 %3 %4 %5
(Not used.) Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-01E 04.28.2009 FM5535
Remarks
(Not used.) Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
(Not used.) An attempt to establish the connection to a Check whether the SQL service manager database failed. is operating normally. Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
The information acquisition/storage operation was not successfully performed in relation to the image information file (DDO).
CR-IR 391CL Service Manual
Appx MT 1-25
Appx MT 1-26 Event
Event Source
Description
Causes
Remedies
The information about the system settings was not successfully acquired.
Check the information about the settings with the Service Utility. Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
ErrorCode:%1%nSubSystem:%2 The method is improperly used. %nSourceFile:%3%nSpotCode:% The probable causes are as follows: 4%nParameter Error. %n%5 An improper value is specified as a parameter. A record existence check error. A record duplication check error. Exclusive check error.
Restart. If the same symptom recurs, perform a reinstallation.
11010
CustomControl.cs
An attempt to exercise the pronunciation automatic input function resulted in a failure.
The OS is abnormal.
Restart the application. If the same error recurs, reinstall the OS.
11010
FuriganaEditCtrl.cs
An attempt to enter characters with the software keyboard resulted in a failure.
The application is abnormal.
Restart the application.
11020
FuriganaEditCtrl.cs
An attempt to move the character cursor position with the software keyboard resulted in a failure.
The application is abnormal.
Restart the application.
11030
FuriganaEditCtrl.cs
An attempt to delete characters in The application is abnormal. the text box with the software keyboard resulted in a failure.
Restart the application.
11040
FuriganaEditCtrl.cs
The application is abnormal. An attempt to initialize the caret position of a character string in the text box resulted in a failure while the patient information input window was open.
Restart the application.
11050
FuriganaEditCtrl.cs
An attempt to exercise IME control The application is abnormal. over the patient information input window text box resulted in a failure.
Restart the application.
11060
FuriganaEditCtrl.cs
An attempt to perform IME setup for the patient information input window text box resulted in a failure.
Restart the application.
020-221-01E 04.28.2009 FM5535
The application is abnormal.
CR-IR 391CL Service Manual
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Appx MT 1-26
Appx MT 1-27 Event
Event Source
Description
Causes
Remedies
Remarks
11070
FuriganaEditCtrl.cs
An attempt to change the font style of the patient information input window resulted in a failure.
The application is abnormal.
Restart the application.
11080
FuriganaEditCtrl.cs
An attempt to perform font setup for the patient information input window text box resulted in a failure.
The application is abnormal.
Restart the application.
11300
FFCustomMsgBox
An error occurred in an attempt to The problem is attributable to the system acquire system setup information. setting database. Setup processing continues partially by using the existing values.
11300
UserAuth
ErrorCode:%1%nSubSystem:%2 An error occurred when an attempt was %nSourceFile:%3%nSpotCode:% made to access a NetConfig.mdb file. The file might be damaged. 4%nNetConfig.mdb File Access Error.
Processing continues with the default value. However, check the device information setup with the Service Utility.
11301
FFCustomMsgBox
A failure occurred while accessing the directory setup file.
Restart the server computer.
11301
UserAuth
ErrorCode:%1%nSubSystem:%2 A Directory.ini file access error occurred. %nSourceFile:%3%nSpotCode:% The file might be damaged. 4%nDirectory.ini File Access Error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11302
FFCustomMsgBox
Failed in accessing the character string database.
11302
UserAuth
ErrorCode:%1%nSubSystem:%2 A character string was not successfully %nSourceFile:%3%nSpotCode:% acquired from the character string 4%nString DB Access Error. database. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The problem is attributable to the character string database.
CR-IR 391CL Service Manual
Appx MT 1-27
Appx MT 1-28 Event
Event Source
Description
Causes
Remedies
11303
FFCustomMsgBox
An attempt to acquire character strings resulted in a failure.
11303
UserAuth
ErrorCode:%1%nSubSystem:%2 An error occurred when an attempt was Restart. If the same symptom recurs, %nSourceFile:%3%nSpotCode:% made to log in automatically. The database perform a reinstallation. 4%nAuto Login Error. might be damaged.
11304
FFCustomMsgBox
Processing continued even though an attempt to acquire user information resulted in a failure.
Restart the server computer.
11304
UserAuth
ErrorCode:%1%nSubSystem:%2 An error occurred when an attempt was %nSourceFile:%3%nSpotCode:% made to acquire user information. 4%nUser Table Access Error.
Restart. If the same symptom recurs, perform a reinstallation.
11305
FFCustomMsgBox
A failure occurred when initializing exclusive information of a study.
Restart the server computer.
11305
UserAuth
ErrorCode:%1%nSubSystem:%2 An error occurred when an attempt was Restart. If the same symptom recurs, %nSourceFile:%3%nSpotCode:% made to perform an exclusive-right deletion perform a reinstallation. 4%nDelete Study Exclusive Error. process for the equipment status table.
11306
FFCustomMsgBox
A failure occurred when initializing exclusive information of an equipment unit.
11306
UserAuth
ErrorCode:%1%nSubSystem:%2 An error occurred when an attempt was Restart. If the same symptom recurs, %nSourceFile:%3%nSpotCode:% made to perform an exclusive-right deletion perform a reinstallation. 4%nDelete RU Exclusive Error. process for the equipment status table.
020-221-01E 04.28.2009 FM5535
Remarks
The problem is attributable to the character string database. %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-28
Appx MT 1-29 Event
Event Source
Description
Causes
Remedies
Remarks
11307
FFCustomMsgBox
Failed in reading the user image.
11307
UserAuth
ErrorCode:%1%nSubSystem:%2 An error occurred when an attempt was %nSourceFile:%3%nSpotCode:% made to load a user image. The user 4%nLoad User Icon Error. image might be deleted.
Although there is no operational problem, %1=Error Code: The code that uniquely use the Client Utility to perform user image identifies an error. setup again. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11308
FFCustomMsgBox
An error occurred during user authentication processing.
Restart the server computer.
11308
UserAuth
ErrorCode:%1%nSubSystem:%2 An internal system error occurred during %nSourceFile:%3%nSpotCode:% user authentication. 4%nUser Confirm Error.
Restart. If the same symptom recurs, perform a reinstallation.
11309
FFCustomMsgBox
Password entered is incorrect.
Re-enter Password.
11309
UserAuth
ErrorCode:%1%nSubSystem:%2 An incorrect password was entered. %nSourceFile:%3%nSpotCode:% 4%nWrong Password was inputted.
Nothing particular.
11310
FFCustomMsgBox
User selected is not registered or is deleted.
● Select another user and log on the system.
11400
FCRWeb
ErrorCode:%1%nSubSystem:%2 The search conditions were not specified. %nSourceFile:%3%nSpotCode:% 4%nThe search condition is not specified.
Specify the search conditions and then retry.
020-221-01E 04.28.2009 FM5535
In an environment where multiple client computers are connected, this can occur when there is simultaneous login from multiple computers.
An incorrect password was entered.
Log-in operation can be continued. If the problem persists, re-set the user image in the Client Utility.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-29
Appx MT 1-30 Event
Event Source
Description
Causes
Remedies
Remarks
11401
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nThe use prohibition character is included in patient ID.
An unacceptable character is included in Enter an account name without using the patient ID. You cannot use ““””, “#”, “%”, unacceptable characters. “&”, “’”, “+”, “?”, “\”, “/”, “●”, “@”, 1-byte Katanaka characters, 2-byte characters, or a character string consisting of a blank only.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11402
FCRWeb
ErrorCode:%1%nSubSystem:%2 An unacceptable character is included in Enter an account name without using %nSourceFile:%3%nSpotCode:% the patient name. You cannot use “●”, “@”, unacceptable characters. 4%nThe use prohibition character or 2-byte characters. is included in the patient name.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11403
FCRWeb
ErrorCode:%1%nSubSystem:%2 The birth date was not properly specified. %nSourceFile:%3%nSpotCode:% 4%nThe specification at date of birth is not correct.
Follow the example and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11404
FCRWeb
ErrorCode:%1%nSubSystem:%2 The date selected as the end date of the %nSourceFile:%3%nSpotCode:% last update was earlier than the start date. 4%nA past date was selected by the end day of last updated date on the beginning day.
Ensure that the end date of the last update %1=Error Code: The code that uniquely is not earlier than the start date. identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11405
FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt was made to execute a function Select a patient from the patient %nSourceFile:%3%nSpotCode:% without selecting a patient from the patient information list, and then retry. 4%nPlease select the patient information list. information list.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-30
Appx MT 1-31 Event
Event Source
Description
Causes
Remedies
Remarks
11406
FCRWeb
ErrorCode:%1%nSubSystem:%2 No data is input for an essential input item. Set data for an essential input item, and %nSourceFile:%3%nSpotCode:% then retry. 4%nPlease set the input indispensability item.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11407
FCRWeb
ErrorCode:%1%nSubSystem:%2 The entered patient ID already exists. %nSourceFile:%3%nSpotCode:% 4%nPatient ID overlaps.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11408
FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt was made to execute a function Perform user information setup and then %nSourceFile:%3%nSpotCode:% without selecting a user from the user retry. 4%nPlease select the user information list. information list.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11409
FCRWeb
ErrorCode:%1%nSubSystem:%2 No data is input for an essential input item. Set data for an essential input item, and %nSourceFile:%3%nSpotCode:% then retry. 4%nPlease set the input indispensability item.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11410
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nThe use prohibition character is included in the account name.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
An unacceptable character is included in the account name. You cannot use “\”, “/”, “|”, “:”, “<”, “>”, “?”, “+”, “=”, “●”, or a character string consisting of a blank only.
Enter a different patient ID, and then retry.
Enter an account name without using unacceptable characters.
CR-IR 391CL Service Manual
Appx MT 1-31
Appx MT 1-32 Event
Event Source
Description
Causes An unacceptable character is included in the user name. You cannot use “\”, “/”, “|”, “:”, “<”, “>”, “?”, “+”, “=”, “●”, or a character string consisting of a blank only.
11411
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nThe use prohibition character is included in the user-name.
11412
FCRWeb
11413
Remedies
Remarks
Enter an account name without using unacceptable characters.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 Administrator cannot be specified as an %nSourceFile:%3%nSpotCode:% account name. 4%nAdministrator cannot be specified for the account name.
Enter an account name other than “Administrator“ and “Service Engineer”, and retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
FCRWeb
ErrorCode:%1%nSubSystem:%2 Service Engineer cannot be specified as %nSourceFile:%3%nSpotCode:% an account name. 4%nService Engineer cannot be specified for the account name.
Enter an account name other than “Administrator” and “Service Engineer”, and retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11414
FCRWeb
ErrorCode:%1%nSubSystem:%2 The entered password is incorrect. %nSourceFile:%3%nSpotCode:% 4%nThe mistake is found in the password.
Enter a correct password and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11416
FCRWeb
ErrorCode:%1%nSubSystem:%2 The selected image was deleted. %nSourceFile:%3%nSpotCode:% 4%nThe selected image was deleted. Please select another image.
Select another image.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11416
FFCustomMsgBox
The selected image was deleted.
Select another user image.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-32
Appx MT 1-33 Event
Event Source
Description
Causes
Remedies
Remarks
11417
FCRWeb
ErrorCode:%1%nSubSystem:%2 The icon picture object was not %nSourceFile:%3%nSpotCode:% successfully created. The error is 4%nThe account name overlaps. attributable to resource insufficiency or system instability.
Specify another account name.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11418
FCRWeb
ErrorCode:%1%nSubSystem:%2 A password mismatch has been detected. %nSourceFile:%3%nSpotCode:% 4%nThe password is not corresponding.
Enter a correct password.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11419
FCRWeb
ErrorCode:%1%nSubSystem:%2 No image is selected. %nSourceFile:%3%nSpotCode:% 4%nThe image has not been selected.
Select an image, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11420
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe image that other users selected is used.
The selected image was used by another user.
Carry it out again after a while.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11421
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nPlease specify the JPEG file.
The specified file was not in JPEG format.
Specify a JPEG file.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-33
Appx MT 1-34 Event
Event Source
Description
Causes
Remedies
Remarks
11422
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe size of the picture file is too large.
The image file size was too large.
Specify an image file that is not larger than %1=Error Code: The code that uniquely 25 KB. identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11424
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe use prohibition character is included in the category.
An unacceptable character is included in the category name. You cannot use “\”, “/”, “|”, “:”, “<”, “>”, “?”, “+”, “=”, “●”, or a character string consisting of a blank only.
An unacceptable character is included in the category name. Enter a different category name.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11425
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nExplanation information that tried to be registered has already been registered.
An attempt was made to register previously Specify another category name and then registered explanatory information. retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11426
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nPlease set the input indispensability item.
No data is input for an essential input item. Set data for the essential input item, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11427
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe password is not input.
No password is input.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
Enter a password and then retry.
CR-IR 391CL Service Manual
Appx MT 1-34
Appx MT 1-35 Event
Event Source
Description
Causes
Remedies
Remarks
11428
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nPlease set the input indispensability item.
No data is input for an essential input item. Set data for the essential input item, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The character string in the content field has Edit the character string until it consists of exceeded 1000 characters in length. no more than 1000 characters.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11430
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe account name exceeded 20 characters.
The account name has exceeded 20 characters in length.
Enter an account name consisting of not more than 20 characters.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The user name has exceeded 20 characters in length.
Enter a user name consisting of not more than 20 characters.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11432
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nMedia the disk management file only for readout are write-protecting it.
The management file was for read only or write-protected.
Retry with a write-enabled medium.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11432
FFCustomMsgBox
The disk is for read only or DVD is write-protected.
020-221-01E 04.28.2009 FM5535
Check the contents of the disk.
CR-IR 391CL Service Manual
Appx MT 1-35
Appx MT 1-36 Event
Event Source
Description
Causes The entered volume label name is already used.
Remedies
Remarks
11433
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe input volume label name has already been used.
11433
FFCustomMsgBox
The input volume label name has already been used.
11434
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe disk has not been inserted.
11434
FFCustomMsgBox
No disk has been inserted.
Insert a disk.
11435
FCRWeb
ErrorCode:%1%nSubSystem:%2 A wrong date format is used. %nSourceFile: %3%nSpotCode: %4%nThe date format is different.
Set the date in a format that is indicated as %1=Error Code: The code that uniquely an example. identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
11436
FCRWeb
ErrorCode:%1%nSubSystem:%2 The maximum permissible number of %nSourceFile: %3%nSpotCode: explanatory information registrations was %4%nThe maximum registration exceeded. number of explanation information was exceeded.
Delete unnecessary explanatory information and then retry.
020-221-01E 04.28.2009 FM5535
Set a different volume label name, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Specify another volume label name and retry. No disk is inserted into its position.
Insert a disk and then retry.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-36
Appx MT 1-37 Event
Event Source
Description
Causes
Remedies
11437
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe exclusive operation is set.
11437
FFCustomMsgBox
Another user is now operating this system.
11438
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe manager cannot be deleted.
11438
FFCustomMsgBox
Administrator can not be deleted.
Choose a user other than the administrator.
11442
FFCustomMsgBox
There is no user image.
● Add user images accordingly.
11443
FFCustomMsgBox
Storing images in read-only disk was requested.
● Select a rewritable drive and retry.
11444
FFCustomMsgBox
Format processing failed.
● Select a drive which is able to format and retry.
11449
FFCustomMsgBox
The disk needs to be rebuilt.
● Restore the disk.
11455
FFCustomMsgBox
The disk is in use.
● Carry it out again after a while.
11456
FFCustomMsgBox
The disk has been exchanged.
● Check the contents of the disk.
11457
FFCustomMsgBox
Drive specified does not exist.
● Ensure that the drive has been connected correctly and then retry.
11459
FFCustomMsgBox
Selected user information cannot be modified because the user is being logged on.
11460
FFCustomMsgBox
User information logging on cannot be deleted.
11461
FFCustomMsgBox
An automatically verify user can not be deleted.
11462
FFCustomMsgBox
User selected cannot be deleted.
11464
FFCustomMsgBox
Are you sure you want to delete the following user account? %s
020-221-01E 04.28.2009 FM5535
An exclusive process is set.
Carry it out again after a while.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Carry it out again after a while. The administrator cannot be deleted.
Nothing particular.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-37
Appx MT 1-38 Event
Event Source
Description
Causes
Remedies
11465
FFCustomMsgBox
A failure occurred when uploading user images.
● Ensure that the network cable has been connected correctly.
11490
FFCustomMsgBox
Setting user ID failed.
● This event will not be displayed.
11491
FFCustomMsgBox
Patient information corresponding with specified patient ID does not exist.
11492
FFCustomMsgBox
Another process is updating the patient information.
11493
FFCustomMsgBox
Specified Patient ID is already registered.
11494
FFCustomMsgBox
The disk is restored.
11495
FFCustomMsgBox
Current user is not allowed this operation.
11496
FFCustomMsgBox
A fatal error occurred.
11497
FFCustomMsgBox
Specified files do not exist.
11498
FFCustomMsgBox
The server device could not be accessed.
11500
FFCustomMsgBox
A fatal error occurred.
❍ Contact your service engineer.
11501
FFCustomMsgBox
The process is being canceled because this system is required to shut down.
❍ Restart this system and retry.
11502
FFCustomMsgBox
The process is interrupted by the power supply cut off.
❍ Restart this system and retry.
11503
FFCustomMsgBox
Data in the disk is inconsistency.
❍ Execute “Disk restoration” operation.
11504
FFCustomMsgBox
Disk storing failed.
❍ Check the disk status.
11505
FFCustomMsgBox
Drive specified does not exist.
❍ Ensure that the specified drive has been connected correctly.
11506
FFCustomMsgBox
Disk unlocking failed.
❍ Check the disk drive status.
11507
FFCustomMsgBox
An error occurred in an attempt to eject disk.
❍ Check the disk drive status.
11508
FFCustomMsgBox
Write operations can not be performed for a reference drive.
❍ Use a drive for storage.
11509
FFCustomMsgBox
No disk has been inserted.
❍ Insert a disk.
11510
FFCustomMsgBox
Drive specified is not removable.
❍ Ensure that the specified drive has been connected correctly.
11511
FFCustomMsgBox
Disk specified is read-only.
❍ Insert a writable disk.
020-221-01E 04.28.2009 FM5535
Remarks
❍ Carry it out again after a while.
❍ Are you sure?
● Contact your service engineer. ❍ Press the button below to close this dialog and terminate the system. In an environment where multiple client computers are connected, this can occur when the server load is high.
Retry the operation. If the problem is not resolved, restart the client application.
CR-IR 391CL Service Manual
Appx MT 1-38
Appx MT 1-39 Event
Event Source
Description
Causes
Remedies
11512
FFCustomMsgBox
Disk specified is not inserted.
❍ Confirm the inserted disk.
11513
FFCustomMsgBox
The process is being canceled because this system is required to shut down.
❍ Restart this system and retry.
11514
FFCustomMsgBox
The process is interrupted by the power supply cut off.
❍ Restart this system and retry.
11515
FFCustomMsgBox
Data in the disk is inconsistency.
❍ Execute “Disk restoration” operation.
11516
FFCustomMsgBox
Drive specified does not exist.
❍ Ensure that the specified drive has been connected correctly.
11517
FFCustomMsgBox
Disk locking failed.
❍ Check the disk drive status.
11518
FFCustomMsgBox
Write operations can not be performed for a reference drive.
❍ Use a drive for storage.
11519
FFCustomMsgBox
Disk specified is in use.
❍ Carry it out again after a while.
11520
FFCustomMsgBox
No disk has been inserted.
❍ Insert a disk.
11521
FFCustomMsgBox
Drive specified is not removable.
❍ Ensure that the specified drive has been connected correctly.
11522
FFCustomMsgBox
Inserted disk is unformatted.
❍ Confirm the inserted disk.
11523
FFCustomMsgBox
The process is being canceled because this system is required to shut down.
❍ Restart this system and retry.
11524
FFCustomMsgBox
The process is interrupted by the power supply cut off.
❍ Restart this system and retry.
11525
FFCustomMsgBox
Data in the disk is inconsistency.
❍ Execute “Disk restoration” operation.
11526
FFCustomMsgBox
Free disk space is insufficient.
❍ Confirm the inserted disk.
11527
FFCustomMsgBox
Inserted disk is not new (unused).
❍ Insert a new disk.
11528
FFCustomMsgBox
Disk storing failed.
❍ Confirm the inserted disk.
11529
FFCustomMsgBox
Drive specified does not exist.
❍ Ensure that the specified drive has been connected correctly.
11530
FFCustomMsgBox
Inserted disk is write-protected.
❍ Confirm the inserted disk.
11531
FFCustomMsgBox
Disk locking failed.
❍ Check the disk drive status.
11532
FFCustomMsgBox
Specified label name is already registered.
❍ Specify another label name.
11533
FFCustomMsgBox
Inserted disk is not new (unused).
❍ Insert a new disk.
11534
FFCustomMsgBox
Write operations can not be performed for a reference drive.
❍ Use a drive for storage.
11535
FFCustomMsgBox
Disk specified is in use.
❍ Carry it out again after a while.
11536
FFCustomMsgBox
No disk has been inserted.
❍ Insert a disk.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Remarks
Appx MT 1-39
Appx MT 1-40 Event
Event Source
Description
Causes
Remedies
11537
FFCustomMsgBox
Drive specified is not removable.
❍ Ensure that the specified drive has been connected correctly.
11538
FFCustomMsgBox
The process is being canceled because this system is required to shut down.
❍ Restart this system and retry.
11539
FFCustomMsgBox
The process is interrupted by the power supply cut off.
❍ Restart this system and retry.
11540
FFCustomMsgBox
Disks cannot be formatted with this drive.
❍ Ensure that the drive specified has been connected correctly.
11541
FFCustomMsgBox
Disk formatting failed.
● It is possible that the disk is broken or write-protected. ❍ Insert another disk and retry.
11542
FFCustomMsgBox
Drive specified does not exist.
❍ Ensure that the specified drive has been connected correctly.
11543
FFCustomMsgBox
Disk specified is not inserted.
❍ Confirm the inserted disk.
11544
FFCustomMsgBox
The process is being canceled because this system is required to shut down.
❍ Restart this system and retry.
11545
FFCustomMsgBox
The process is interrupted by the power supply cut off.
❍ Restart this system and retry.
11546
FFCustomMsgBox
Disk specified is not for management.
❍ Insert a disk for management.
11547
FFCustomMsgBox
Drive specified does not exist.
❍ Ensure that the specified drive has been connected correctly.
11548
FFCustomMsgBox
Write operations can not be performed for a reference drive.
❍ Use a drive for storage.
11549
FFCustomMsgBox
This disk is consistent. It is not necessary to restore a disk.
11550
FFCustomMsgBox
No disk has been inserted.
❍ Insert a disk.
11551
FFCustomMsgBox
Drive specified is not removable.
❍ Ensure that the specified drive has been connected correctly.
11552
FFCustomMsgBox
Inserted disk is unformatted.
❍ Exchange disks and format.
11553
FFCustomMsgBox
Disk specified is read-only.
❍ Insert a writable disk.
11554
FFCustomMsgBox
Disk restoring is canceled.
11555
FFCustomMsgBox
The process is being canceled because this system is required to shut down.
❍ Restart this system and retry.
11556
FFCustomMsgBox
The process is interrupted by the power supply cut off.
❍ Restart this system and retry.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Remarks
Appx MT 1-40
Appx MT 1-41 Event
Event Source
Description
Causes
Remedies
11557
FFCustomMsgBox
Free disk space is insufficient.
❍ Confirm the inserted disk.
11558
FFCustomMsgBox
Disk storing failed.
❍ Confirm the inserted disk.
11559
FFCustomMsgBox
Drive specified does not exist.
❍ Ensure that the specified drive has been connected correctly.
11560
FFCustomMsgBox
Inserted disk is write-protected.
❍ Confirm the inserted disk.
11561
FFCustomMsgBox
Disk locking failed.
❍ Check the disk drive status.
11562
FFCustomMsgBox
Disk unlocking failed.
❍ Check the disk drive status.
11563
FFCustomMsgBox
This disk is consistent. It is not necessary to restore a disk.
11564
FFCustomMsgBox
The disk is illegal.
❍ Confirm the inserted disk.
11565
FFCustomMsgBox
The disk has been exchanged.
❍ Retry from the beginning.
11566
FFCustomMsgBox
Write operations can not be performed for a reference drive.
❍ Use a drive for storage.
11567
FFCustomMsgBox
No disk has been inserted.
❍ Insert a disk.
11568
FFCustomMsgBox
Drive specified is not removable.
❍ Ensure that the specified drive has been connected correctly.
11569
FFCustomMsgBox
Inserted disk is unformatted.
❍ Confirm the inserted disk.
11570
FFCustomMsgBox
Interrupted the processing of database rebuilding.
● Some selected studies may already have been registered.
11571
FFCustomMsgBox
The process is being canceled because this system is required to shut down.
❍ Restart this system and retry.
11572
FFCustomMsgBox
The process is interrupted by the power supply cut off.
❍ Restart this system and retry.
11573
FFCustomMsgBox
Data in the disk is inconsistent.
❍ Restore the disk.
11574
FFCustomMsgBox
The inserted disk is a new (unused) disk.
❍ Confirm the inserted disk.
11575
FFCustomMsgBox
Drive specified does not exist.
❍ Ensure that the specified drive has been connected correctly.
11576
FFCustomMsgBox
Disk locking failed.
❍ Check the disk drive status.
11577
FFCustomMsgBox
The hard disk is full.
11578
FFCustomMsgBox
Storing images in read-only disk was requested.
11579
FFCustomMsgBox
The drive is in use.
11580
FFCustomMsgBox
No disk is inserted.
11581
FFCustomMsgBox
The drive is not removable.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Remarks
Appx MT 1-41
Appx MT 1-42 Event
Event Source
Description
Causes
Remedies
11582
FFCustomMsgBox
The disk has been already formatted.
11583
FFCustomMsgBox
The disk is not formatted.
11584
FFCustomMsgBox
The disk is read-only.
11585
FFCustomMsgBox
Disk specified is not inserted.
11586
FFCustomMsgBox
The requested processing has been canceled.
11587
FFCustomMsgBox
The process has been canceled.
11588
FFCustomMsgBox
The process is interrupted by the power supply cut off.
11589
FFCustomMsgBox
Data in the disk is inconsistent. (DICOMDIR)
11590
FFCustomMsgBox
Image information in the disk is illegal.
● The disk cannot be used. Eject and confirm it.
The structure within The disk is illegal or The information is insufficient. It is necessary to send an inquiry to a device that created The disk.
11591
FFCustomMsgBox
Format is not allowed under system settings.
● Use a formatted disk. ● If you wish to format disks on this system, contact your service engineer.
Use the disk format setup function of the Service Utility to select “OS” or “Dedicated application.”
11592
FFCustomMsgBox
Free disk space is insufficient.
11593
FFCustomMsgBox
Inserted disk is not a new (unused) disk.
11594
FFCustomMsgBox
There are no targeted images in this disk.
● Change to a correct disk.
The target image is not stored on the disk inserted by the user.
11595
FFCustomMsgBox
Inserted disk is a new (unused) disk.
11596
FFCustomMsgBox
Disk specified is not for management.
11597
FFCustomMsgBox
Disk storing failed. Possible ● Eject the disk, conform it and retry. causes are: ● Contact your service engineer if the (1) The disk is broken same symptom recurs even after it has (2) The disk drive is not connected been retried. correctly.
No data can be written onto the medium because it is broken. The drive is broken.
11598
FFCustomMsgBox
Disk formatting failed. System ● Contact your service engineer. settings may have been incorrect.
Although “Dedicated application” is selected for disk format setup from the Service Utility, the format tool filename or path is incorrectly set.
11599
FFCustomMsgBox
Drive specified does not exist. System settings may have been incorrect.
The disk drive path for the Service Utility is not properly set.
020-221-01E 04.28.2009 FM5535
● Contact your service engineer.
CR-IR 391CL Service Manual
Remarks
Appx MT 1-42
Appx MT 1-43 Event
Event Source
Description
Causes
Remedies
11600
FFCustomMsgBox
The disk is write-protected.
11601
FFCustomMsgBox
Disk locking failed.
● Ensure that the disk drive has been connected correctly and retry. ● Contact your service engineer if the same symptom recurs even after it has been retried.
This error could not normally occur.
11602
FFCustomMsgBox
Disk unlocking failed. The disk drive may have been in use.
● Carry it out again after a while. ● Contact your service engineer if the same symptom recurs even after it has been retried.
Check whether the drive is accessed, for instance, by explorer.
11603
FFCustomMsgBox
An error occurred in an attempt to ● Carry it out again after a while. eject disk. The disk drive may ● Contact your service engineer if the have been in use. same symptom recurs even after it has been retried.
Check whether the drive is accessed, for instance, by explorer.
11604
FFCustomMsgBox
The disk needs to be rebuilt.
11605
FFCustomMsgBox
The disk structure is incorrect or some files are broken.
● The process is either discontinued or continued excluding certain files.
The disk is partly broken.
11606
FFCustomMsgBox
Image information in the disk is illegal.
● The disk cannot be used. Eject, confirm it and retry. ● Contact your service engineer if the same symptom recurs even after it has been retried.
This error could not normally occur.
11607
FFCustomMsgBox
Image information in the disk is illegal.
● The disk cannot be used. Eject, confirm it and retry. ● Contact your service engineer if the same symptom recurs even after it has been retried.
This error could not normally occur.
11608
FFCustomMsgBox
The disk has been exchanged.
● Eject the disk, confirm it and retry. ● Contact your service engineer if the same symptom recurs even after it has been retried.
This error could not normally occur.
11609
FFCustomMsgBox
Failed in obtaining information in the disk.
● Eject the disk, confirm it and retry. ● Contact your service engineer if the same symptom recurs even after it has been retried.
An internal logic error has occurred.
11610
FFCustomMsgBox
Some images failed in acquiring.
11611
FFCustomMsgBox
Same label name already exists.
● Set another label name and retry. ● Contact your service engineer if the same symptom recurs even after it has been retried.
This error could not normally occur.
11612
FFCustomMsgBox
The disk needs to be rebuilt.
11613
FFCustomMsgBox
Drive specified is not removable.
020-221-01E 04.28.2009 FM5535
Remarks
❍ Ensure that the specified drive has been connected correctly.
CR-IR 391CL Service Manual
Appx MT 1-43
Appx MT 1-44 Event
Event Source
Description
Causes
Remedies
11615
FFCustomMsgBox
The disk is illegal.
❍ Confirm the inserted disk.
11617
FFCustomMsgBox
No disk has been inserted.
❍ Insert a disk and retry.
11620
FFCustomMsgBox
Failed in starting HtmlView ● Contact your service engineer. window. Installation may not have been finished successfully.
HtmlView.exe is not installed at the correct location. It is necessary to perform a reinstallation.
11621
FFCustomMsgBox
Failed in terminating HtmlView window.
● Restart the server computer. ● Contact your service engineer if the same symptom recurs even after it has been restarted.
The cause of this error is unknown. If The same error recurs after a restart, send feedback to the design personnel.
11622
FFCustomMsgBox
Failed in terminating HtmlView window.
❍ Press the button below to continue other This error could not normally occur. processes. The operation can be continued. If the same error recurs, send feedback to the design personnel.
11627
FFCustomMsgBox
Failed in accessing files within the disk. It is possible that some files are damaged.
● Contact your service engineer.
11628
FFCustomMsgBox
No image storage disk is registered.
❍ Rebuild the disk, and restore database from the disk.
11629
CustomMsgBoxCom
The disk cannot be recognized.
[11629] Disk unidentified.
Check contents of the disk. Format it as necessary and reinsert.
11711
FFPresetData AccessCom
ErrorCode:01 SourceFile:CPreset.cs SpotCode:2 Preset registration num is full.
Preset registration num is full.
There is no operational problem. (There is not operation fault even in case of output.)
11900
FFInputEz
%1 : Registry Value Get/Set Error Information was not successfully acquired from the registry. [Key] %2 [Exp] %3 %4 %5
An attempt to establish the connection to a Check whether the SQL service manager database failed. is operating normally. Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
A database information acquisition or storage failed.
020-221-01E 04.28.2009 FM5535
Remarks
(Not used.) Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-44
Appx MT 1-45 Event
Event Source
Description
Causes
Remedies
Remarks
11903
FFInputEz
%1 : DDO Data Get/Set Error [Tag] %2 %3 %4 %5
The information acquisition/storage operation was not successfully performed in relation to the image information file (DDO).
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Abnormal patient information was transmitted from the receipt computer, or the transmitted patient information was not successfully operated on.
This problem may be solved when an automatic retry is performed by the application. Check whether the network is disconnected. Check for improper patient information. If the patient information is improper, correct it and transmit the corrected patient information from the receipt computer. It is possible that unsupported patient information was transmitted from the receipt computer. Check the operation performed by the receipt computer. If the above cure does not work, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
11905
FFInputEz
%1 :Patient Information Error %2%[DATA]n %3%[Exp]n %4 %5
Abnormal patient information was transmitted from the receipt computer.
Check whether the patient information is abnormal. If it is abnormal, correct it and transmit the corrected patient information from the receipt computer. It is possible that unsupported patient information was transmitted from the receipt computer. Check the operation performed by the receipt computer. If the above cure does not work, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
12001 FF32
[%1] It failed in CreateFile (%2). %3
Failed in reading a bitmap file. It is conceivable that there was no such file, free disk space was not sufficient or the system was unstable.
Check to see if the filename is correct or available hard disk space is sufficient. Proceed with processing.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12002 FF32
[%1] It failed in CreateFileMapping (%2). %3
File map object generation failed. This failure is attributable to resource insufficiency or system instability.
Proceed with processing.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12003 FF32
[%1] It failed in MapViewOfFile (%2). %3
File map object generation failed. This failure is attributable to resource insufficiency or system instability.
Proceed with processing.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12004 FF32
[%1] It failed in CreateCompatibleDC. %2
Failed in creating a device context. It is conceivable that available resources were insufficient or the system was unstable.
Proceed with processing.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-45
Appx MT 1-46 Event
Event Source
Description
Causes
Remedies
Remarks
12005 FF32
[%1] A DIB section was not successfully Proceed with processing. It failed in CreateDIBSection (%2). created. The error is attributable to %3 resource insufficiency or system instability.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12006 FF32
[%1] It failed in OleCreatePictureIndirect (%2). %3
Failed in creating a bitmap picture object. It is conceivable that available resources were insufficient or the system was unstable.
Proceed with processing.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12007 FF32
[%1] Exception error. (%2). %3
An exceptional error occurred.
The program might be faulty. Check the operations performed before and after the error occurrence, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer. Processing will be continued.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12008 FF32
[%1] It failed in ExtractIcon. %2
The icon file was not successfully loaded. The error is attributable to a nonexistent file, disk space insufficiency, or system instability.
Check to see if the filename is correct or available hard disk space is sufficient. Proceed with processing.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12009 FF32
[%1] It failed in OleCreatePictureIndirect (%2). %3
The icon picture object was not successfully created. The error is attributable to resource insufficiency or system instability.
Proceed with processing.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12010 FF32
[%1] Exception error. (%2). %3
An exceptional error occurred.
The program might be faulty. Check the program. Processing will be continued.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12011
[%1] It is a file path error. %2
The file path was illegal.
Check to see if the filename is correct. Proceed with processing.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12012 FF32
[%1] Memory allocation failed (%2). %3
Memory allocation failed. This error is attributable to resource insufficiency or system instability.
Check whether the filename is correct. Processing will be continued.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
12013 FF32
[%1] Exception error. (%2).
An exceptional error occurred.
The program might be faulty. Check the operations performed before and after the error occurrence, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer. Processing will be continued.
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The option key (OpApplication) for application identification has not been installed.
It is possible that installation could not be completed correctly. Perform a reinstallation after uninstalling.
12103 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not get Indicator-icon status from Event Object.
The indicator status information was not successfully acquired.
There is no operational problem.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12114
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get the RU-device-status from database.
The RU device status information was not successfully acquired. An internal system error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12116
FCRWeb
ErrorCode:%1%nSubSystem:%2 An RU operation failed. An internal system Restart both the server application and %nSourceFile: %3%nSpotCode: error occurred. client application. If the same error recurs, %4%nDB Error: Can not register perform a reinstallation. RU-control-command to database.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12118
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get the RU-device-info from database.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12119
FCRWeb
ErrorCode:%1%nSubSystem:%2 RU device exclusive control was not %nSourceFile: %3%nSpotCode: successfully ended. An internal system %4%nDB Error: Can not release error occurred. RU-exclusive-info on database when RU-control command failed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
The RU internal information was not successfully acquired. An internal system error occurred.
CR-IR 391CL Service Manual
Appx MT 1-47
Appx MT 1-48 Event
Event Source
Description
Causes
Remedies
Remarks
12121 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not send response to RU-error-dialog.
A window display request was not successfully answered. An internal system error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12123 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get RU-control-result from database.
The RU operation was not successfully monitored. An internal system error occurred.
Check that the RU is not performing a process, and then restart both the server application and client application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12124 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not release RU-exclusive-info on database when RU-control command completed.
Exclusive control was not successfully ended after RU monitoring. An internal system error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12126 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nRU-control-result not found on database. RU-control may be cancelled by other process.
The RU operation was not successfully monitored. It is conceivable that the RU operation was canceled by another process.
Check that the RU is not performing a process, and then restart both the server application and client application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12127 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nSpecified RU is in-use by other user/process.
The specified RU was being used by another user.
Wait until the RU process terminates, and then try again.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-48
Appx MT 1-49 Event
Event Source
Description
Causes
Remedies
Remarks
12128 FCRWeb
ErrorCode:%1%nSubSystem:%2 The RU cannot be operated because a Open the RU status window and return a %nSourceFile: %3%nSpotCode: window display request is currently issued. response to the window display request. %4%nRU status error: RU-controlcommand invalid when RU-errordialog displayed.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12134 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get the media-status from database.
Media status acquisition failed. An internal system error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12135 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get the media-list-info from database.
The storage disk list was not successfully acquired. An internal system error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12140 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get printer-info from database.
The printer information was not successfully acquired. An internal system error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12146 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not get the outputqueue-info from database.
The output queue information was not Restart both the server PC and client PC successfully acquired. This error is attributable to an inactive server application or a deactivated database.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-49
Appx MT 1-50 Event
Event Source
Description
Causes
Remedies
Remarks
12148 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not operate the specified output-queue.
An attempt to register information in a Restart both the server application and database failed. The problem is attributable client application. If the same error recurs, to a database timeout or other database perform a reinstallation. error.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12155 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not get the specified event-info.
The event information was not successfully Restart both the server application and acquired. The database might be client application. If the same error recurs, damaged. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12157 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not update the status of specified event-info.
The error status was not successfully Restart both the server application and updated. The database might be damaged. client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12162 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not connect to NetConfig database.
An error occurred when an attempt was made to access a NetConfig.mdb file. The file might be damaged.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12163 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not disconnect from NetConfig database.
NetConfig was not successfully disconnected.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-50
Appx MT 1-51 Event
Event Source
Description
Causes
12173 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get specified System-Configuration from database.
The system settings were not successfully acquired. An internal system error occurred.
12174 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get specified System-Configuration from database (Value is not Setup).
The system settings could not be acquired. The process will be continued by using No values were set as the system settings. default values. Set appropriate values as the system settings.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12176 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not get the specified directory-info from Directory.ini file.
An attempt to acquire information from the Directory.ini file failed. The error is attributable to a nonexistent file or a damaged file.
Check the Diretory.ini file, and then restart the server application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12178 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not get the specified registry value (DWORD).
Registry data was not successfully acquired due to an exception error.
The process will be continued by using default values.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12180 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not connect to LangMsgBox database.
The file was not successfully acquired from Restart both the server application and LangMsgBox.mdb. The error is attributable client application. If the same error recurs, to a nonexistent file or a damaged file. perform a reinstallation.
020-221-01E 04.28.2009 FM5535
Remedies The process will be continued by using default values.
CR-IR 391CL Service Manual
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-51
Appx MT 1-52 Event
Event Source
Description
Causes
Remedies
Remarks
12181 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not get the specified Message String.
Message acquisition failed. The LangMsgBox.mdb file might be damaged.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12185 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not get User-ID on the basis of Login-User-ID.
User ID acquisition failed due to an exception error.
There is no operational problem. Processing will be continued.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The operation log was not successfully written due to an exception error.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12188 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not register operationlog.
The operation log was not successfully written due to an exception error.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12190 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Can not get specified message-string from database.
The character string was not successfully acquired. This failure is attributable to a database timeout or other database error.
The process will be continued by using default values.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-52
Appx MT 1-53 Event
Event Source
Description
Causes
Remedies
Remarks
12191 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDB Error: Specified message-string not found.
No character string is set.
The process will be continued by using default values.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12201 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not send response to RU-error-dialog (Already responded).
A response was already made to the RU.
Wait for a while, click the “Update” button to refresh the window, and continue the operation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12202 FCRWeb
ErrorCode:%1%nSubSystem:%2 The response is completed. %nSourceFile: %3%nSpotCode: %4%nCan not send response to RU-error-dialog (Already deleted).
Click the “Update” button to refresh the window, and continue the operation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The specified output queue operation is already registered.
There is no operational problem.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12224 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not update the status of specified event-info (Already deleted).
The selected event information was already deleted.
Refresh the window and continue the operation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-53
Appx MT 1-54 Event
Event Source
Description
Causes
Remedies
Remarks
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12225 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not get the specified registry value (SZ).
12400 FCRWeb
ErrorCode:%1%nSubSystem:%2 The patient information was not Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: successfully acquired. The database might perform a reinstallation. %4%nIt failed in the acquisition of be damaged. patient information.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12401 FCRWeb
ErrorCode:%1%nSubSystem:%2 The patient information was not %nSourceFile: %3%nSpotCode: successfully registered. The database %4%nIt failed in the registration of might be damaged. patient information.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12402 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update of patient information.
The patient information was not successfully updated. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12403 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the deletion of patient information.
The patient information was not successfully deleted. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
Registry data was not successfully acquired due to an exception error.
CR-IR 391CL Service Manual
Appx MT 1-54
Appx MT 1-55 Event
Event Source
Description
Causes
Remedies
Remarks
12404 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the IP use frequency list acquisition.
The IS use count list was not successfully acquired. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12405 FCRWeb
ErrorCode:%1%nSubSystem:%2 The user information was not successfully %nSourceFile: %3%nSpotCode: acquired. The database might be %4%nIt failed in the acquisition of damaged. user information.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12406 FCRWeb
ErrorCode:%1%nSubSystem:%2 The user information list was not Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: successfully acquired. The database might perform a reinstallation. %4%nIt failed in the acquisition of be damaged. the user information list.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12407 FCRWeb
ErrorCode:%1%nSubSystem:%2 The user information list was not Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: successfully acquired. The database might perform a reinstallation. %4%nIt failed in the registration of be damaged. user information.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12408 FCRWeb
ErrorCode:%1%nSubSystem:%2 The user information was not successfully %nSourceFile: %3%nSpotCode: acquired. The database might be %4%nIt failed in the acquisition of damaged. user information.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Appx MT 1-55
Appx MT 1-56 Event
Event Source
Description
Causes
Remedies
Remarks
12409 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update of user information.
The user information was not successfully Restart. If the same symptom recurs, updated. The database might be damaged. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12410 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the deletion of user information.
The user information was not successfully Restart. If the same symptom recurs, updated. The database might be damaged. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12411
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the order preservation.
The sequence was not successfully stored. Restart. If the same symptom recurs, The database might be damaged. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12412 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe image cannot be deleted. The error occurred while demanding the image deletion.
The image could not be deleted. An error occurred when an image deletion request was issued. This is an internal system error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12413 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the addition of the image.
Image addition failed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-56
Appx MT 1-57 Event
Event Source
Description
12414 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the URL acquisition of the paper print setting site.
12415 FCRWeb
Causes
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 The explanatory information was not %nSourceFile: %3%nSpotCode: successfully registered. The database %4%nIt failed in the registration of might be damaged. explanation information.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12416 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update of explanation information.
The explanatory information was not successfully updated. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12417 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the deletion of explanation information.
The explanatory information was not successfully deleted. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12418 FCRWeb
ErrorCode:%1%nSubSystem:%2 The study access history was not Restart. If the same symptom recurs, %nSourceFile:%3%nSpotCode:% successfully acquired. The database might perform a reinstallation. 4%nIt failed in the acquisition of be damaged. the change history.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
The URL of the paper print setup site was not successfully acquired. The database might be damaged.
Remedies
CR-IR 391CL Service Manual
Appx MT 1-57
Appx MT 1-58 Event
Event Source
Description
Causes
Remedies
Remarks
12419 FCRWeb
ErrorCode:%1%nSubSystem:%2 The transmission history was not Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: successfully acquired. The database might perform a reinstallation. %4%nIt failed in the acquisition of be damaged. the transmission history.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12420 FCRWeb
ErrorCode:%1%nSubSystem:%2 A database connection error occurred. %nSourceFile: %3%nSpotCode: The database might not be running. %4%nIt is a data base connection error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12421 FCRWeb
ErrorCode:%1%nSubSystem:%2 The operating privileges were not Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: successfully acquired. The database might perform a reinstallation. %4%nIt failed in the acquisition of be damaged. the operation authority.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12422 FCRWeb
ErrorCode:%1%nSubSystem:%2 The operating privileges were not %nSourceFile: %3%nSpotCode: successfully updated. The database might %4%nIt failed in the update of the be damaged. operation authority.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12423 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the replacement of the disk.
Disk changeover failed. An internal system Restart. If the same symptom recurs, error occurred. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-58
Appx MT 1-59 Event
Event Source
Description
12424 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the format of the disk.
12425 FCRWeb
Causes
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 Disk recovery failed. An internal system %nSourceFile: %3%nSpotCode: error occurred. %4%nIt failed in the restoration of the data base.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12426 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the disk setting.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12427 FCRWeb
ErrorCode:%1%nSubSystem:%2 Disk recovery failed. An internal system %nSourceFile: %3%nSpotCode: error occurred. %4%nIt failed in the restoration of the disk.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12428 FCRWeb
ErrorCode:%1%nSubSystem:%2 The explanatory information was not Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: successfully acquired. The database might perform a reinstallation. %4%nIt failed in the acquisition of be damaged. explanation information.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
Disk formatting failed. An internal system error occurred.
Remedies
Disk setup failed. An internal system error occurred.
CR-IR 391CL Service Manual
Appx MT 1-59
Appx MT 1-60 Event
Event Source
Description
Causes
Remedies
Remarks
12429 FCRWeb
ErrorCode:%1%nSubSystem:%2 The equipment name was not successfully Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: acquired. The database might be perform a reinstallation. %4%nIt failed in the acquisition of damaged. the device name.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12430 FCRWeb
ErrorCode:%1%nSubSystem:%2 The log-in history was not successfully %nSourceFile:%3%nSpotCode:% acquired. The database might be 4%nIt failed in the acquisition of damaged. the login history.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12431 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to acquire a backup history %nSourceFile:%3%nSpotCode:% failed. The database might be damaged. 4%nIt failed in the acquisition of the backup history.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
12900 FFInputEz
%1 : Registry Value Get/Set Error Information was not successfully acquired [Key] %2 from the registry. [Exp] %3 %4 %5
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
%1 : Database Data Get/Set Error A database information acquisition or [DB] %2 storage failed. [Table] %3 [Field] %4 [Exp] %5
020-221-01E 04.28.2009 FM5535
(Not used.) An attempt to establish the connection to a Check whether the SQL service manager database failed. is operating normally. Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-60
Appx MT 1-61 Event
Event Source
Description
Causes
Remedies
Remarks
12903 FFInputEz
%1 : DDO Data Get/Set Error [Tag] %2 %3 %4 %5
The information acquisition/storage operation was not successfully performed in relation to the image information file (DDO).
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
The internal setup information was not successfully acquired.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
13000 FFIdMenuChange
It failed that [%1] gets the FontName
The “Font” key was not found in the registry.
There is no operational problem (garbled characters may be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13000 FFIdMenuItem
It failed that [%1] gets the FontName
The “Font” key was not found in the registry.
There is no operational problem (garbled characters may be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13001 FFIdConnection Watch
Socket error (INVALID_SOCKET) (%1).%n[%2]
Program error.
13001 FFIdMenuChange
It failed that [%1] gets the FontSize
The “FontSizeSS”/“FontSizeS”/“FontSizeM There is no operational problem (garbled ”/“FontSizeL”/“FontSizeLL” key was not characters may be displayed). If you feel found in the registry. uncomfortable, reinstall the CR-IR 391CL.
13001 FFIdMenuItem
It failed that [%1] gets the FontSize
The “FontSizeSS”/“FontSizeS”/“FontSizeM There is no operational problem (garbled ”/“FontSizeL”/“FontSizeLL” key was not characters may be displayed). If you feel found in the registry. uncomfortable, reinstall the CR-IR 391CL.
13001 FFIdRuMainControl
Socket error[%1]
Program error.
13001 FFIdConnection WatchEx
Socket Error (INVALID_SOCKET) Program error. Message [%1] Error Code [%2]
13001 FFIdRuMain ControlEx
Socket Error (INVALID_SOCKET) Program error. Message [%1] Error Code [%2]
13001 FFInput
It failed that [%1] gets the FontName
The “Font” key was not found in the registry.
There is no operational problem (garbled characters may be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13001 FFLogFile
[%1] It failed in CreateFile (%2). %3
Log file creation was unsuccessful. The problem might have been caused, for instance, by an invalid filename selection, inadequate disk space, or system instability.
Check the disk for a free space, or restart the server PC.
13001 FFCustomMsgBox
MessageBox DataBase Connection Error. [%1]
The message database was not successfully connected. It is conceivable that the database did not exist or that the specified data source name was invalid.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
FF32lib Database Access An attempt to access the database failed. Failure.%nFunction:%1 Command:%2%nErrNo:%3 NativeErrNo:%4 SQLState:%5%n Source:%6%nDescription:%7
Restart the server computer.
[%1, %2, %3, %4, %5]: Detailed information
13001 FFNetDB
An error occurred when an attempt was NetConfig Database Access made to access a database. Failure.%nErrNo:%1 NativeErrNo:%2 SQLState:%3%n Source:%4%nDescription:%5
Restart the server computer.
[%1, %2, %3, %4, %5]: Detailed information
13002 FFIdConnection Watch
Bind error (INVALID_SOCKET) (%1).%n[%2]
Program error.
13002 FFIdMenuChange
It failed that [%1] gets the multibyte flag
The “Multibyte” key was not found in the registry.
Reinstall the system.
13002 FFIdMenuItem
It failed that [%1] gets the multibyte flag
The “Multibyte” key was not found in the registry.
The “FontSizeSS”/“FontSizeS”/“FontSizeM There is no operational problem (garbled ”/“FontSizeL”/“FontSizeLL” key was not characters may be displayed). If you feel found in the registry. uncomfortable, reinstall the CR-IR 391CL.
13002 FFLogFile
[%1] It failed in CreateFileMapping (%2).
File map object generation failed. This failure is attributable to resource insufficiency or system instability.
Restart the server computer.
13002 FFCustomMsgBox
MessageBox Data Get Error. [%1] %2
The specified message was not found in the database. The message was not registered in the database, or the ID was incorrectly specified (due to a program fault).
Perform a reinstallation or install the latest message database again.
FF32lib Database Access Failure. An attempt to access the database failed. InstanceName[%1]%n%2%n Function:%3 Command:%4
Restart the server computer.
[%1, %2, %3, %4, %5]: Detailed information
13002 FFNetDB
NetConfig Database Access An error occurred when an attempt was Failure. InstanceName[%1]%n%2 made to access a database.
Restart the server computer.
[%1, %2, %3, %4, %5]: Detailed information
020-221-01E 04.28.2009 FM5535
The image database was not successfully Restart the server computer. accessed (an ADO related error occurred).
CR-IR 391CL Service Manual
[%1, %2, %3, %4, %5]: Detailed information
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
Appx MT 1-62
Appx MT 1-63 Event
Event Source
Description
Causes
Remedies
Remarks
13003 FFIdConnection Watch
Listen error (INVALID_SOCKET) (%1).%n[%2]
Program error.
13003 FFIdMenuChange
[%1] failed in the initialization for the display group data acquisition
The “DisplayDataDB” key was not found in Reinstall the system. Directory.ini or the connection character string was not properly registered in the display group table.
An error occurred when an attempt was made to access a database.
Restart the server computer.
(Not used.) [%1, %2, %3, %4, %5]: Detailed information
13004 FFIdConnection Watch
Accept error (%1).%n[%2]
Program error.
13004 FFIdMenuChange
[%1] failed in the display group data acquisition
The “DisplayDataDB” key was not found in Reinstall the system. Directory.ini or the connection character string was not properly registered in the display group table.
13004 FFIdMenuItem
[Miss] Image Get Error
“Id_MissExposure_I.bmp” was not found in There is no operational problem (the button the path to an image folder or the image might not normally be displayed). format was illegal. If you feel uncomfortable, reinstall the CR-IR 391CL.
13004 FFIdRuMainControl
Accept error[%1]
Program error.
13004 FFIdConnection WatchEx
Accept Error Message [%1] Error Code [%2]
Program error.
020-221-01E 04.28.2009 FM5535
Reinstall the system.
CR-IR 391CL Service Manual
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
Appx MT 1-63
Appx MT 1-64 Event
Event Source
Description
Causes
Remedies
13004 FFIdRuMain ControlEx
Accept Error Message [%1] Error Code [%2]
Program error.
13004 FFInput
It failed that [%1] gets the connection string of STR DB
The “LangStrDB” key was not found in Directory.ini.
Reinstall the system.
13004 FFLogFile
[%1] It failed in CreateMutex (%2). %3
Mutex creation failed. This failure is attributable to resource insufficiency or system instability.
Restart the server computer.
13004 FFCustomMsgBox
MessageBox Dialog Create Error. The message box could not be generated. [%1] This error is attributable to resource insufficiency or system instability.
13005 FFIdConnection Watch
Recv error (%1).%n[%2]
The connection to the RU was closed or an Restore the RU connection to normal. error occurred in the connection.
13005 FFIdMenuChange
[%1] failed in the liberating processing of the display group data acquisition
The connection to the display group table was not successfully closed.
13005 FFIdRuMainControl
Recv error[%1]
The connection to the RU was closed or an Check the connection to the RU. error occurred in the connection.
13005 FFIdConnection WatchEx
Recv Error Message [%1] Error Code [%2]
The connection to the RU was closed or an Restore the RU connection to normal. error occurred in the connection.
13005 FFIdRuMain ControlEx
Recv Error Message [%1] Error Code [%2]
The connection to the RU was closed or an Restore the RU connection to normal. error occurred in the connection.
13005 FFInput
Reinstall the system. It failed that [%1] connects to STR The connection character string was not DB properly registered for the “LangStrDB” key in Directory.ini.
13005 FFCustomMsgBox
MessageBox Dialog Show Error. [%1]
The message box could not be generated. This error is attributable to resource insufficiency or system instability.
13006 FFIdConnection Watch
CloseSocekt error (%1).%n[%2]
Program error.
13006 FFIdDepartSelect
It failed that [%1] finds corresponding record
Program error.
13006 FFIdMenuChange
[%1] failed in the initialization for the display menu data acquisition
The “DisplayDataDB” key was not found in Reinstall the system. Directory.ini.
13006 FFIdRuMainControl
CloseSocekt error[%1]
Program error.
13006 FFIdConnection WatchEx
Socket Close Error Message [%1] Error Code [%2]
Program error.
13006 FFIdRuMain ControlEx
Socket Close Error Message [%1] Error Code [%2]
Program error.
13006 FFInput
It failed that [%1] gets the connection string of SYS DB
The “SysConfigDB” key was not found in Directory.ini.
020-221-01E 04.28.2009 FM5535
Remarks
[%1]: Instance name [%2]: Error code [%3]: Filename/mutex
Restart the server computer.
Restart. If the same symptom recurs, perform a reinstallation.
Restart the server computer.
Reinstall the system.
CR-IR 391CL Service Manual
Appx MT 1-64
Appx MT 1-65 Event
Event Source
Description
Causes
Remedies
13006 FFCustomMsgBox
List For Modaless MessageBox Management New Error. [%1]
The modeless message box management table was not successfully created. This error is attributable to resource insufficiency or system instability.
13007 FFIdConnection Watch
CreateThread error (%1).%n[%2]
Program error.
13007 FFIdMenuChange
[%1] failed in the acquisition of number of records of display menu data
The connection character string was not properly registered in the display group table.
13007 FFIdRuMainControl
CreateThread error[%1]
Program error.
13007 FFIdConnection WatchEx
Thread Create Error Message [%1] Error Code [%2]
Program error.
13007 FFIdRuMain ControlEx
Thread Create Error Message [%1] Error Code [%2]
Program error.
13007 FFInput
It failed that [%1] connects to SYS The connection character string was not DB properly registered for the “SysConfigDB” key in Directory.ini.
13008 FFIdMenuChange
[%1] failed in the display menu data acquisition
Not properly registered to the display group Reinstall the system. table.
13008 FFIdRuMainControl
Not Send Message Before Ack Returned [%1]
Program error.
13008 FFIdConnection WatchEx
Message Send Error Message [%1] Error Code [%2]
A connection error occurred.
Restore the RU connection to normal.
13008 FFIdRuMain ControlEx
Message Send Error [%1] WSAGetLastError = [%2]
A connection error occurred.
Restore the RU connection to normal.
13008 FFInput
It failed that [%1] calls the CUSTOM MESSAGE BOX (%2)
The message database did not exist or the Reinstall the system. program was faulty.
13008 FFCustomMsgBox
An exception error occurred. [%1] %2
An exception error occurred.
Restart the server computer.
13009 FFIdConnection Watch
LogFile Name Make error (%1).%n[%2]
The “Log” key was not found in Directory.ini.
Reinstall the system.
13009 FFIdMenuChange
[%1] failed in the liberating processing of the display menu data acquisition
The connection to the display menu table was not successfully closed.
Restart. If the same symptom recurs, perform a reinstallation.
13009 FFIdRuMainControl
LogFile Name Make error[%1]
The “Log” key was not found in Directory.ini.
Reinstall the system.
13009 FFIdConnection WatchEx
Log File Name Make Error Message [%1] Error Code [%2]
The “Log” key was not found in Directory.ini.
Register the “Log” key in Directory.ini.
13009 FFIdRuMain ControlEx
Log File Name Make Error Message [%1] Error Code [%2]
The “Log” key was not found in Directory.ini.
Register the “Log” key in Directory.ini.
020-221-01E 04.28.2009 FM5535
Remarks
Restart the server computer.
Reinstall the system.
Reinstall the system.
CR-IR 391CL Service Manual
Appx MT 1-65
Appx MT 1-66 Event
Event Source
Description
Causes
Remedies
13009 FFCustomMsgBox
Common function error occurred. [%1] %2
The common function returned an error.
13009 FFInput
It failed that [%1] gets the Patient Information
Program error.
13010 FFIdConnection Watch
DB Connect error (%1).%n[%2]
“SysConfigDB” key was not found in Reinstall the system. Directory.ini or SysConfig.mdb did not exist in the specified path.
13010 FFIdMenuChange
[%1] failed in the termination of the display menu data acquisition
The connection to the display menu table was not successfully closed.
13010 FFIdRuMainControl
DB Connect error[%1]
“SysConfigDB” key was not found in Reinstall the system. Directory.ini or SysConfig.mdb did not exist in the specified path.
13010 FFIdConnection WatchEx
DB Connect Error Message [%1] Error Code [%2]
“SysConfigDB” key was not found in Properly register the “SysConfigDB” key in Directory.ini or SysConfig.mdb did not exist Directory.ini. in the specified path.
13010 FFIdRuMain ControlEx
DB Connect Error Message [%1] Error Code [%2]
“SysConfigDB” key was not found in Properly register the “SysConfigDB” key in Directory.ini or SysConfig.mdb did not exist Directory.ini. in the specified path.
13010 FFInput
It failed that [%1] initializes [%2]
Program error.
13010 FFCustomMsgBox
ActiveX Data Objects (ADO) Error. The database was not successfully operated. ErroNo:%1 Source:%2 Description:%3
Restart the server computer.
13011
FFIdConnection Watch
DB Read error (%1).%n[%2]
The “EchoInterval”, “ComBreakTimeout1”“ PortFrupStatus”, or “EnableLogFrupConnect” key was not found in SysConfig.mdb.
Reinstall the system.
13011
FFIdMenuChange
The code of the specified group does not exist in [%1]
Program error.
13011
FFIdRuMainControl
DB Read error[%1]
The “PortFrupMain”, “AckTimeout”, or Reinstall the system. “EnableLogFrupMain” key was not found in SysConfig.mdb.
13011
FFIdConnection WatchEx
DB Read error Message [%1] Error Code [%2]
The “EchoInterval”, “ComBreakTimeout1”“ PortFrupStatus”, or “EnableLogFrupConnect” key was not found in SysConfig.mdb.
13011
FFIdRuMain ControlEx
DB Read error Message [%1] Error Code [%2]
The “PortFrupMain”, “AckTimeout”, or Ensure that the “PortFrupMain”, “EnableLogFrupMain” key was not found in “AckTimeout”, and “EnableLogFrupMain” SysConfig.mdb. keys are all registered in SysConfig.mdb.
13011
FFInput
It failed that [%1] gets the window The “ScallHight”/“ScallWidth” key was not size registered in the registry.
020-221-01E 04.28.2009 FM5535
Remarks
Restart the server computer.
Restart. If the same symptom recurs, perform a reinstallation.
Ensure that the “EchoInterval”, “ComBreakTimeout1”, “PortFrupStatus”, and “EnableLogFrupConnect” keys are all registered in SysConfig.mdb.
Reinstall the system.
CR-IR 391CL Service Manual
Appx MT 1-66
Appx MT 1-67 Event
Event Source
Description
Causes
Remedies
13012 FFIdConnection Watch
DB Close error (%1).%n[%2]
Program error.
13012 FFIdMenuChange
The code of the specified menu does not exist in [%1]
Program error.
13012 FFIdRuMainControl
DB Close error[%1]
Program error.
13012 FFIdConnection WatchEx
DB Close Error Message [%1] Error Code [%2]
Program error.
13012 FFIdRuMain ControlEx
DB Close Error Message [%1] Error Code [%2]
Program error.
13012 FFInput
It failed that [%1] make the pipe
Program error.
13013 FFIdMenuChange
It failed that [%1] get the folder path to Bitmap
The “Bitmap” key was not found in Directory.ini.
13013 FFIdConnection WatchEx
Configuration Error Message [%1] Error Code [%2]
Program error.
13013 FFIdRuMain ControlEx
Configuration error[%1] WSAGetLastError = [%2]
The program was faulty or SysConfig.mdb was abnormal.
13013 FFInput
It failed that [%1] closes connection with RU [%2]
Program error.
13014 FFIdConnection Watch
Ack Message Time Out (%1).%n[%2]
The connection to the RU was closed or an Check the connection to the RU. error occurred in the connection.
13014 FFIdMenuChange
It failed that [%1] get the bitmap to “Id_PrevPage_U.bmp”/“Id_PrevPage_ Previous Page D.bmp”/“Id _PrevPage_X.bmp” was not found in the path to an image folder or the image format was illegal.
13014 FFIdRuMainControl
Ack Message Time Out[%1]
The connection to the RU was closed or an Check the connection to the RU. error occurred in the connection.
13014 FFIdConnection WatchEx
Ack Message Time Out Message [%1] Error Code [%2]
The connection to the RU was closed or an Restore the RU connection to normal. error occurred in the connection.
13014 FFIdRuMain ControlEx
Ack Message Time Out[%1] WSAGetLastError = [%2]
The connection to the RU was closed or an Restore the RU connection to normal. error occurred in the connection.
13014 FFInput
[%1] No RU Used
Although the FRUP option is selected, the RU connection setting is not found in NetConfig. There are inconsistencies between the option settings and Config settings.
020-221-01E 04.28.2009 FM5535
Remarks
Reinstall the system.
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
Check settings.
CR-IR 391CL Service Manual
Appx MT 1-67
Appx MT 1-68 Event
Event Source
Description
Causes
Remedies
13014 ImportImageFolder AccessCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode: %4%n Arbitrary Information Details.
13015 FFIdMenuChange
It failed that [%1] get the bitmap to “Id_NextPage_U.bmp”/“Id_NextPage_ Next Page D.bmp”/“Id _NextPage_X.bmp” was not found in the path to an image folder or the image format was illegal.
The error is attributable to improper RU setup for the CR-IR 391CL or a faulty program.
13018 FFInput
The code of the specified group does not exist in [%1]
Program error.
13019 FFInput
The code of the specified menu does not exist in [%1]
Program error.
13020 FFInput
RU Error DB Connect Error in [%1]
The connection character string was not Reinstall the system. properly registered for the “RuErrorDataDB” key in Directory.ini or the RU error information database did not exist.
020-221-01E 04.28.2009 FM5535
A message related to a system operation.
Nothing particular.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
CR-IR 391CL Service Manual
Appx MT 1-68
Appx MT 1-69 Event
Event Source
Description
Causes
Remedies
13021 FFInput
RU Error Data Get Error in [%1]
The window number sent from the RU was Ensure that the RU version agrees with the not found in the RU error information RU error information database version. database.
13022 FFInput
RU Status DB Connection String Get Error in [%1]
The connection character string was not properly registered for the “RuStatusDataDB” key in Directory.ini.
The patient information contained illegal information.
Correct the patient information setup.
13023 FFInput
RU Status DB Connect Error in [%1]
The connection character string was not properly registered for the “RuStatusDataDB” key in Directory.ini or the RU error information database did not exist.
Reinstall the system.
13024 FFIdPatInfoInput
%1 (%2) : Bitmap Image Get Error%n BMP File [%3]
“Id_LocalSearch_U.bmp”/“Id_ LocalSearch_D.bmp”/“Id_LocalSearch_ X.bmp” was not found in the path to an image folder or the image format was illegal.
Place “Id_LocalSearch_U.bmp”, “Id_ LocalSearch_D.bmp”, and “Id_ LocalSearch_X.bmp” in the path to the folder in which images are positioned.
13024 FFInput
RU Status Data Get Error in [%1]
The status number sent from the RU was not found in the RU error information database.
Ensure that the RU version agrees with the RU status information database version.
13025 FFIdPatInfoInput
%1 (%2) : Patient Info Get Error%n Error [%3]%n RetCode [%4]
The patient information database is damaged.
Repair the patient information database.
13025 FFInput
%1%n%2%n%3%n%4%n%5%n %6%n%7%0
Program error.
13026 FFIdPatInfoInput
%1 (%2) : Patient Info Set Error%n Error [%3]%n RetCode [%4]
Patient information to be registered Enter correct patient information or repair included illegal information items or patient patient information database. information database was damaged.
13027 FFIdPatInfoInput
%1 (%2) : Patient Info Not Correspond%n RetCode [%3]%n
No matching patient information was found.
13027 FFInput
%1%n%2%n%3%n%4%n%5%n %6%n%7%0
Control information
13028 FFInput
%1%n%2%n%3%n%4%n%5%n %6%n%7%0
Program error.
13030 FFInput
%1%n%2%n%3%n%4%n%5%n %6%n%7%0
Control information
13031 FFInput
[%s] %s (%s) : Log Output Directory Get Error
The system setup database was damaged. Reinstall the system.
020-221-01E 04.28.2009 FM5535
Remarks
Nothing particular.
Nothing particular.
CR-IR 391CL Service Manual
Appx MT 1-69
Appx MT 1-70 Event
Event Source
Description
Causes
Remedies
13033 FFInput
[%s] %s (%s) : LR button cannot be concave set
The range was changed by the Service Utility.
Nothing particular.
13034 FFInput
[%s] %s (%s) : TB button cannot be concave set
The range was changed by the Service Utility.
Nothing particular.
13035 FFInput
[%s] %s (%s) : TBLR button cannot be concave set
The range was changed by the Service Utility.
Nothing particular.
13036 FFInput
[%s] %s (%s) : rotation button cannot be concave set
The range was changed by the Service Utility.
Nothing particular.
13037 FFInput
[%s] %s (%s) : Message Table Name Get Error
The “MsgTableName” key was not found in Reinstall the system. the system setup database.
13038 FFInput
[%s] %s (%s) : StrDB Connection String Get Error
The “LangStrDB” key was not found in Directory.ini.
13039 FFInput
[%s] %s (%s) : StrDB Connect Error
Reinstall the system. The connection character string was not properly registered for the “LangStrDB” key in Directory.ini.
13040 FFInput
[%s] %s (%s) : SysDB Connection The “SysConfigDB” key was not found in String Get Error Directory.ini.
Reinstall the system.
13041 FFInput
[%s] %s (%s) : SysDB Connect Error
The connection character string was not properly registered for the “SysConfigDB” key in Directory.ini.
Reinstall the system.
13052 FFInput
[%s] %s (%s) : Failed MenuDB Initialize
The menu database access initialization process was not successfully performed.
Reinstall the system.
13053 FFInput
[%s] %s (%s) : Menu Data in ImageDB Get Error
The menu information was not successfully Reinstall the system. acquired from the menu database.
13054 FFInput
[%s] %s (%s) : Menu Parameter Data in ImageDB Get Error
The menu parameter information was not successfully acquired from the menu database.
Reinstall the system.
13055 FFInput
[%s] %s (%s) : Failed MenuDB Termination
The menu database access termination process was not successfully performed.
Reinstall the system.
13056 FFInput
[%s] %s (%s) : NetDB Connection The “NetConfigDB” key was not found in Character String Get Error Directory.ini.
Reinstall the system.
13057 FFInput
[%s] %s (%s) : Failed NetDB Connection
The connection character string was not properly registered for the “NetConfigDB” key in Directory.ini.
Reinstall the system.
13058 FFInput
[%s] %s (%s) : NetDB Data Get Error
The network setup database was damaged.
Reinstall the system.
13059 FFInput
[%s] %s (%s) : Failed Create New An attempt to create new DICOM data DICOM Data failed.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
13060 FFInput
[%s] %s (%s) : DICOM Data Get Error
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
020-221-01E 04.28.2009 FM5535
The DICOM data was not successfully acquired.
Remarks
Reinstall the system.
CR-IR 391CL Service Manual
Appx MT 1-70
Appx MT 1-71 Event
Event Source
Description
Causes
Remedies
13061 FFInput
[%s] %s (%s) : DICOM Data Set Error
An attempt to set up DICOM data failed.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
13062 FFInput
[%s] %s (%s) : DICOM Data Delete Error
The DICOM data was not successfully deleted.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
13063 FFInput
[%s] %s (%s) : DICOM Data Load The DICOM data was not successfully Error loaded.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
13064 FFInput
[%s] %s (%s) : DICOM Data Save The DICOM data was not successfully Error saved.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
13065 FFInput
[%s] %s (%s) : DICOM Data Free Error
The DICOM data was not successfully opened.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
13066 FFInput
[%s] %s (%s) : Failed in Padding Acquisition[Id#]
The “IdPadding” key was not found in the system setup database.
Reinstall the system.
13067 FFInput
[%s] %s (%s) : Failed in Padding Acquisition[Exam#]
The “ExaminationNoPadding” key was not found in the system setup database.
Reinstall the system.
13068 FFInput
[%s] %s (%s) : Failed in Format Acquisition[Date Of Birth]
The “DateFormat” key was not found in the Reinstall the system. system setup database.
13069 FFInput
[%s] %s (%s) : Cannot Access Data Base[Depart.mdb]
The requesting department database was not found in the path indicated by the connection character string. The requesting department table did not exist.
Reinstall the system.
13070 FFInput
[%s] %s (%s) : Displayed Item Is Not Understood[Depart List]
The “FieldDepartList” key was not found in the system setup database.
Reinstall the system.
13071 FFInput
[%s] %s (%s) : Failed in Acquisition[Depart]
Program error.
13072 FFInput
[%s] %s (%s) : Failed in Connected String Acquisition[Depart]
The “DepartDB” key was not found in Directory.ini.
Reinstall the system.
13073 FFInput
[%s] %s (%s) : Cannot Access Data Base[Paramedic.mdb]
The technician’s database was not found in the pass indicated by the connection character string or the technician’s table did not exist.
Reinstall the system.
13074 FFInput
[%s] %s (%s) : Displayed Item Is Not Understood[Paramedic List]
The “FieldParamedicList” key was not found in the system setup database.
Reinstall the system.
13075 FFInput
[%s] %s (%s) : Failed in Acquisition[Paramedic]
Program error.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Remarks
Appx MT 1-71
Appx MT 1-72 Event
Event Source
Description
Causes
Remedies
13076 FFInput
[%s] %s (%s) : Failed in Connected String Acquisition[Paramedic]
The “ParamedicDB” key was not found in Directory.ini.
Reinstall the system.
13077 FFInput
[%s] %s (%s) : Failed in Window Size Acquisition
The registry was damaged.
Reinstall the system.
13078 FFInput
[%s] %s (%s) : Failed in ExposureList Erase
The “ExposureListEraset” key was not found in the system setup database.
Reinstall the system.
13079 FFInput
[%s] %s (%s) : Config Directory Character String Get Error
The “Confdig” key was not found in Directory.ini.
Reinstall the system.
13081 FFInput
[%s] %s (%s) : StrDB Message String Get Error
The image database was damaged.
Reinstall the system.
13082 FFInput
[%s] %s (%s) : IP-Address (RU) Get Error
The network setup database was damaged.
Reinstall the system.
13083 FFInput
[%s] %s (%s) : Initialize Timeout
The system was unstable.
Restart.
13084 FFInput
[%s] %s (%s) : Terminate Error
The system was unstable.
Restart.
13085 FFInput
[%s] %s (%s) : Terminate Timeout The system was unstable.
Restart.
13086 FFInput
[%s] %s (%s) : Input Method Error The system was unstable.
Restart.
13087 FFInput
[%s] %s (%s) : Original Image Input Failure
The system was unstable.
Restart.
13088 FFInput
[%s] %s (%s) : Image Processing Trouble
The system was unstable.
Restart.
13089 FFInput
[%s] %s (%s) : Menu Read Error
The image database or information file is damaged.
%1 (%2) : Invalid Depart Name (SBCS)%n Name (SBCS) [%3]
The database was damaged.
Reinstall the system.
020-221-01E 04.28.2009 FM5535
Directory.ini was damaged.
CR-IR 391CL Service Manual
Remarks
Appx MT 1-72
Appx MT 1-73 Event
Event Source
Description
Causes
Remedies
Remarks
13091 FFIdParamedic Select
%1 (%2) : Invalid Paramedic Name (SBCS)%n Name (SBCS) [%3]
13091 FFInput
[%s] %s (%s) : Input Method Error Program error.
13091 FFIdIndividualSelect
%1 (%2) : Invalid Depart/ Paramedic Name (SBCS)%n Name (SBCS) [%3]
The database was damaged.
13092 FFIdDepartSelect
%1 (%2) : Invalid Depart Name (DBCS)%n Name (DBCS) [%3]
Program error.
13092 FFIdParamedic Select
%1 (%2) : Invalid Paramedic Name (DBCS)%n Name (DBCS) [%3]
Program error.
13092 FFInput
[%s] %s (%s) : Input End Method Error
Program error.
13092 FFIdIndividualSelect
%1 (%2) : Invalid Depart/ Paramedic Name (DBCS)%n Name (DBCS) [%3]
Program error.
13093 FFInput
[%s] %s (%s) : Priority Change Method Error
Program error.
13094 FFInput
[%s] %s (%s) : Message Send Error
The system was unstable.
13095 FFInput
[%s] %s (%s) : State Change Method Error
Program error.
13096 FFInput
[%s] %s (%s) : Request Command The RU side might be faulty (a command Not Executed was not executed although it was requested).
13097 FFInput
[%s] %s (%s) : State Info Get Error
Program error.
13098 FFIdPatInfoInput
%1 (%2) : %n [%3]%n %4%n %5
A general-purpose message related to patient information input (for error indication/information display).
13098 FFInput
[%s] %s (%s) : Reconnect Error
The line was abnormal.
13098 FF32LIB
FF32lib A WIN32 system library error occurred. [%1]%n%2
An error occurred when calling up the WIN32 API.
Restart the server computer.
[%1, %2, %3, %4, %5]: Detailed information
13098 FFNetDB
FFNetDB A WIN32 system library error occurred. [%1]%n%2
An error occurred when calling up the WIN32 API.
Restart the server computer.
[%1, %2, %3, %4, %5]: Detailed information
020-221-01E 04.28.2009 FM5535
The database was damaged.
Reinstall the system.
Repair the database.
Restart.
Check the RU status.
If an error is encountered, a custom message box appears. Follow the instructions set forth in the custom message box.
CR-IR 391CL Service Manual
Appx MT 1-73
Appx MT 1-74 Event
Event Source
Description
Causes
Remedies
Remarks
13099 FFIdMenuItem
Unknown error has occurred [%1] Program error. (%2)
13099 FFInput
[%s] %s (%s) : Disconnect Error
The line was abnormal.
13099 FF32LIB
FF32lib An unknown error occurred. [%1]%n%2
An exception error occurred.
Restart the server computer.
[%1, %2, %3, %4, %5]: Detailed information
13099 FFNetDB
FFNetDB An unknown error occurred. [%1]%n%2
An exception error occurred.
Restart the server computer.
[%1, %2, %3, %4, %5]: Detailed information
13102 FFInput
[%s] %s (%s) : Failed in Display Group Acquisition[Free]
Program error.
13103 FFInput
[%s] %s (%s) : Failed in Display Menu Acquisition[Initialize]
The “DisplayDataDB” key was not found in Reinstall the system. Directory.ini.
13104 FFInput
[%s] %s (%s) : Failed in Display Menu Acquisition[Record]
The menu database is damaged.
13105 FFInput
[%s] %s (%s) : Failed in Display Menu Acquisition
Program error.
13106 FFInput
[%s] %s (%s) : Failed in Display Menu Acquisition[Free]
Program error.
13107 FFInput
[%s] %s (%s) : Failed in Display Menu Acquisition[Endding ]
Program error.
13108 FFInput
[%s] %s (%s) : Failed in Exposure The menu database is damaged. Menu Acquisition
Reinstall the system.
13109 FFInput
[%s] %s (%s) : Next Set Number Data Get Error
The registry was damaged.
Reinstall the system.
13110
FFInput
[%s] %s (%s) : Next Set Number Data Set Error
The registry was damaged.
Reinstall the system.
13111
FFInput
[%s] %s (%s) : System ID Data Get Error
The system setup database was damaged. Reinstall the system.
13112
FFInput
[%s] %s (%s) : Auto Distribution Data Get Error
The system setup database was damaged. Reinstall the system.
13113
FFInput
[%s] %s (%s) : Enable Selector Data Get Error
The system setup database was damaged. Reinstall the system.
13114
FFInput
[%s] %s (%s) : Auto Menu Select Data Get Error
The system setup database was damaged. Reinstall the system.
13115
FFInput
[%s] %s (%s) : Next Set Number Min Data Get Error
The system setup database was damaged. Reinstall the system.
13116
FFInput
[%s] %s (%s) : Next Set Number Max Data Get Error
The system setup database was damaged. Reinstall the system.
020-221-01E 04.28.2009 FM5535
Reinstall the system.
CR-IR 391CL Service Manual
Appx MT 1-74
Appx MT 1-75 Event
Event Source
Description
Causes
Remedies
13117
FFInput
[%s] %s (%s) : Image UID Issue Error
Program error.
13118
FFInput
[%s] %s (%s) : Series Instance UID Issue Error
Program error.
13119
FFInput
[%s] %s (%s) : Failed in Auto Distribution
Program error.
13120 FFInput
[%s] %s (%s) : Failed in Getting ID-Online Port#
The database was not found or the associated key did not exist.
Reinstall the system.
13121 FFInput
[%s] %s (%s) : Failed in ID-Online The database was not found or the Device Name associated key did not exist.
Reinstall the system.
13122 FFInput
[%s] %s (%s) : RU Status DB Connection String Get Error
Reinstall the system.
13123 FFInput
[%s] %s (%s) : Failed in selectable The “SelectableDirection” key was not direction found in the system setup database or its value was incorrect.
13124 FFInput
[%s] %s (%s) : Failed in Selectable Image Format Acquisition
The “SelectableFormat” key was not found Reinstall the system. in the system setup database or its value was incorrect.
13125 FFInput
[%s] %s (%s) : FilmMarkDB Connection String Get Error
The “FilmMarkDB” key was not found in Directory.ini.
Reinstall the system.
13126 FFInput
[%s] %s (%s) : FilmMarkDB Connect Error
The connection character string was not properly registered for the “FilmMarkDB” key in Directory.ini.
Reinstall the system.
13127 FFInput
[%s] %s (%s) : FilmMarkDB Get Error [Film Mark Information]
Program error.
13128 FFInput
[%s] %s (%s) : Failed in Limit Film The “LimitFilmCopy” key was not found in Reinstall the system. Copy Acquisition the system setup database or its value was incorrect.
13129 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCan not delete RU-controlresult from database. RU-controlresult already deleted by other user/process.
The RU operation record was not successfully deleted. An internal system error occurred.
13129 FFInput
[%s] %s (%s) : Thumbnail Creating Trouble
Program error.
13130 FFInput
[%s] %s (%s) : ID Change Method Program error. Error
020-221-01E 04.28.2009 FM5535
Directory.ini was damaged.
Remarks
Reinstall the system.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-75
Appx MT 1-76 Event
Event Source
Description
Causes
Remedies
13131 FFInput
[%s] %s (%s) : Failed in The “SelectableEdrMode” key was not Selectable EDR Mode Acquisition found in the system setup database or its value was incorrect.
Reinstall the system.
13132 FFInput
[%s] %s (%s) : Failed in Selectable Function Acquisition
Reinstall the system.
13133 FFInput
[%s] %s (%s) : ID Change Method Program error. Error
13134 FFInput
[%s] %s (%s) : Failed in The “SelectableFilingMode” key was not Selectable EDR Mode Acquisition found in the system setup database or its value was incorrect.
Reinstall the system.
13135 FFInput
[%s] %s (%s) : NetDB Data Get Error
An attempt to acquire a connection character string from the network setup database failed, or the network setup database was not found.
Reinstall the system.
13136 FFInput
[%s] %s (%s) : Failed in Enable DistributionCode Acquisition
The “EnableDistributionCode” key was not found in the system setup database or its value was incorrect.
Reinstall the system.
13137 FFInput
[%s] %s (%s) : Failed in Enable FileString Acquisition
The “EnableFileString” key was not found in the system setup database or its value was incorrect.
Reinstall the system.
13138 FFInput
[%s] %s (%s) : Failed in Enable Function Acquisition
The “EnableFunction” key was not found in Reinstall the system. the system setup database or its value was incorrect.
13139 FFInput
[%s] %s (%s) : Terminate Error
Program error.
13140 FFInput
[%s] %s (%s) : Terminate Error
Program error.
13141 FFInput
[%s] %s (%s) : List Update Error
Program error.
13142 FFInput
[%s] %s (%s) : Study List Initialize Program error. Error [Registered]
13143 FFInput
[%s] %s (%s) : Study List Initialize Program error. Error [QaWaiting]
13144 FFInput
[%s] %s (%s) : Study List Initialize Program error. Error [OutputWaiting]
13145 FFInput
[%s] %s (%s) : Study List Initialize Program error. Error [Outputted]
13146 FFInput
[%s] %s (%s) : Study List Initialize Program error. Error [All]
13147 FFInput
[%s] %s (%s) : Study List Initialize Program error. Error [Today]
020-221-01E 04.28.2009 FM5535
The “SelectableFunction” key was not found in the system setup database or its value was incorrect.
CR-IR 391CL Service Manual
Remarks
Appx MT 1-76
Appx MT 1-77 Event
Event Source
Description
Causes
Remedies
13148 FFInput
[%s] %s (%s) : Study List Update Error [Registered]
Program error.
13149 FFInput
[%s] %s (%s) : Study List Update Error [QaWaiting]
Program error.
13150 FFInput
[%s] %s (%s) : Study List Update Error [OutputWaiting]
Program error.
13151 FFInput
[%s] %s (%s) : Study List Update Error [Outputted]
Program error.
13152 FFInput
[%s] %s (%s) : Study List Update Error [All]
Program error.
13153 FFInput
[%s] %s (%s) : Study List Update Error [Today]
Program error.
13154 FFInput
[%s] %s (%s) : Study Instance UID Get Error
Program error.
13155 FFInput
[%s] %s (%s) : Study Instance UID Get Error IdHome>
Program error.
13156 FFInput
[%s] %s (%s) : QA Start Method Error
Program error.
13157 FFInput
[%s] %s (%s) : Finish Mode Get Error
The system setup database was damaged. Reinstall the system.
13158 FFInput
[%s] %s (%s) : RU Error DB Connection String Get Error
The “RuErrorDataDB” key was not found in Reinstall the system. Directory.ini.
13159 FFInput
[%s] %s (%s) : RU Error DB Table The “MsgTableName” key was not found in Reinstall the system. Name Get Error the system setup database.
The specified ID was not registered in “RuErrorDataDB“ or the custom message box was not successfully called.
Reinstall the system.
13161 FFInput
[%s] %s (%s) : Failed Display Thumbnail Image
The program was faulty or the image file was damaged.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
13162 FFInput
[%s] %s (%s) : Ip Size Unit (Inch/ Metric) Get Error
The system setup database was damaged. Reinstall the system.
13163 FFInput
[%s] %s (%s) : RU Utility Start Method Error
Program error.
13164 FFInput
[%s] %s (%s) : Image Proc End Method Error
Program error.
13165 FFInput
[%s] %s (%s) : Image Size Code Specify Error
RU-dependent symptom.
13166 FFInput
[%s] %s (%s) : Pantomo Setting Get Error
The system setup database was damaged. Repair the system setup database.
020-221-01E 04.28.2009 FM5535
Remarks
Check the RU status.
CR-IR 391CL Service Manual
Appx MT 1-77
Appx MT 1-78 Event
Event Source
Description
Causes
Remedies
13167 FFInput
[%s] %s (%s) : RU Error Info Get Error
13168 FFInput
[%s] %s (%s) : RU Status Info Get The RU status information database was Error damaged.
13169 FFInput
[%s] %s (%s) : Thumbnail End Method Error
Program error.
13170 FFInput
[%s] %s (%s) : Study List Setting Save Error [Registered]
Program error.
13171 FFInput
[%s] %s (%s) : Study List Setting Save Error [QaWaiting]
Program error.
13172 FFInput
[%s] %s (%s) : Study List Setting Save Error [OutputWaiting]
Program error.
13173 FFInput
[%s] %s (%s) : Study List Setting Save Error [Outputted]
Program error.
13174 FFInput
[%s] %s (%s) : Study List Setting Save Error [All]
Program error.
13175 FFInput
[%s] %s (%s) : Study List Setting Save Error [Today]
Program error.
13176 FFInput
[%s] %s (%s) : Study List Customize Error
Program error.
13177 FFInput
[%s] %s (%s) : Default Menu Code Get Error
The system setup database was damaged. Reinstall the system.
13178 FFInput
[%s] %s (%s) : Next Multi Frame Pair Code Data Get Error
The registry was damaged.
Reinstall the system.
13179 FFInput
[%s] %s (%s) : Next Multi Frame Pair Code Data Set Error
The registry was damaged.
Reinstall the system.
13180 FFInput
[%s] %s (%s) : Series Generation Type Data Get Error
The system setup database was damaged. Reinstall the system.
13181 FFInput
[%s] %s (%s) : Multi Frame UID Information Get Error
The system setup database was damaged. Reinstall the system.
13182 FFInput
[%s] %s (%s) : Failed in Getting XCON Port#
The database was not found or the associated key did not exist.
Reinstall the system.
13183 FFInput
[%s] %s (%s) : Failed in XCON Device Name
The database was not found or the associated key did not exist.
Reinstall the system.
13187 FFInput
[%s] %s (%s) : Font Name Get Error
The “Font” key was not found in the registry.
There is no operational problem (garbled characters may be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13188 FFInput
[%s] %s (%s) : Font Size Get Error
The “FontSizeSS”/“FontSizeS”/“FontSizeM There is no operational problem (garbled ”/“FontSizeL”/“FontSizeLL” key was not characters may be displayed). If you feel found in the registry. uncomfortable, reinstall the CR-IR 391CL.
020-221-01E 04.28.2009 FM5535
The RU error database was damaged.
Remarks
Reinstall the RU software. Reinstall the RU software.
CR-IR 391CL Service Manual
Appx MT 1-78
Appx MT 1-79 Event
Event Source
Description
Causes
Remedies
13189 FFInput
[%s] %s (%s) : Multibyte Flag Get The “Multibyte” key was not found in the Error registry.
13190 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Id#]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30700” was not registered in the character string database.
13191 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Exam#]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30701” was not registered in the character string database.
13192 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[SBCS Patient Name]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30702” was not registered in the character string database.
13193 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[DBCS Patient Name]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30704” was not registered in the character string database.
13194 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Sex]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30704” was not registered in the character string database.
13195 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Sex M]
Reinstall the system. The “LangStrDB” key was not found in Directory.ini or the ID “30705” was not registered in the character string database.
13196 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Sex F]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30706” was not registered in the character string database.
13197 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Sex O]
Reinstall the system. The “LangStrDB” key was not found in Directory.ini or the ID “30707” was not registered in the character string database.
13198 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Date Of Birth]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “0708” was not registered in the character string database.
13199 FFInput
[%s] %s (%s) : Failed in Limitation The “IdLength” key was not found in the No Acquisition[Id#] system setup database.
Reinstall the system.
13200 FFInput
[%s] %s (%s) : Failed in Limitation The “ExaminationNoLength” key was not No Acquisition[Exam#] found in the system setup database.
Reinstall the system.
13201 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Depart]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30800” was not registered in the character string database.
13202 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Paramedic]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30800” was not registered in the character string database.
13203 FFInput
[%s] %s (%s) : Image Folder Path The “Bitmap” key was not found in Get Error Directory.ini.
020-221-01E 04.28.2009 FM5535
Remarks
Reinstall the system.
Reinstall the system.
CR-IR 391CL Service Manual
Appx MT 1-79
Appx MT 1-80 Event
Event Source
Description
Causes
Remedies
13204 FFInput
[%s] %s (%s) : [Clear]Button Image Get Error
“Id_Clear_U.bmp”/“Id_Clear_D.bmp”/“Id_ Clear_ X.bmp” was not found in the path to an image folder or the image format was illegal.
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13205 FFInput
[%s] %s (%s) : [Ok]Button Image Get Error
“Id_Ok_U.bmp”/“Id_Ok_D.bmp”/“Id_Ok_ X.bmp” was not found in the path to an image folder or the image format was illegal.
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13206 FFInput
[%s] %s (%s) : [Cancel]Button Image Get Error
“Id_Cancel_U.bmp”/“Id_Cancel_ D.bmp”/“Id_Cancel_X.bmp” was not found in the path to an image folder or the image format was illegal.
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13207 FFInput
[%s] %s (%s) : [Plus]Button Image “Id_Plus_U.bmp”/“Id_Plus_D.bmp”/“Id_ Get Error Plus_X.bmp” was not found in the path to an image folder or the image format was illegal.
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13208 FFInput
[%s] %s (%s) : [Minus]Button Image Get Error
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13209 FFInput
[%s] %s (%s) : [Next Page]Button “Id_NextPage_U.bmp”/“Id_NextPage_ Image Get Error D.bmp”/“Id _NextPage_X.bmp” was not found in the path to an image folder or the image format was illegal.
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13210 FFInput
[%s] %s (%s) : [Previous Page] Button Image Get Error
“Id_PrevPage_U.bmp”/“Id_PrevPage_ D.bmp”/“Id _PrevPage_X.bmp” was not found in the path to an image folder or the image format was illegal.
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
13211
[%s] %s (%s) : RU Watch Connection Disconnected
The line was abnormal.
Check the line.
13212 FFInput
[%s] %s (%s) : No ACK Returned in RU Watch Connection
The line was abnormal.
Check the line.
13213 FFInput
[%s] %s (%s) : RU Control Connection Disconnected
The line was abnormal.
Check the line.
13214 FFInput
[%s] %s (%s) : No ACK Returned in RU Control Connection
The line was abnormal.
Check the line.
13215 FFInput
[%s] %s (%s) : Model Code Get Error
Program error.
13216 FFInput
[%s] %s (%s) : FRUP Version Get Program error. Error
13217 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Complete]
FFInput
020-221-01E 04.28.2009 FM5535
“Id_Minus_U.bmp”/“Id_Minus_D.bmp”/“Id_ Minus_ X.bmp” was not found in the path to an image folder or the image format was illegal.
Remarks
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30202” was not registered in the character string database.
CR-IR 391CL Service Manual
Appx MT 1-80
Appx MT 1-81 Event
Event Source
Description
Causes
Remedies
13218 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[QA Unfinished]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30201” was not registered in the character string database.
13219 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Interrupt]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30200” was not registered in the character string database.
13220 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Cancel]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30203” was not registered in the character string database.
13221 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[New Study]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30500” was not registered in the character string database.
13222 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Registered]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30501” was not registered in the character string database.
13223 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[QA Waiting]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30502” was not registered in the character string database.
13224 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Output Waiting]
Reinstall the system. The “LangStrDB” key was not found in Directory.ini or the ID “30503” was not registered in the character string database.
13225 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Outputted]
Reinstall the system. The “LangStrDB” key was not found in Directory.ini or the ID “30504” was not registered in the character string database.
13226 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[All]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30505” was not registered in the character string database.
13227 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Today]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30506” was not registered in the character string database.
13228 FFInput
[%s] %s (%s) : Failed in Image Acquisition[System]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30507” was not registered in the character string database.
13229 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[StudyReseve]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30600” was not registered in the character string database.
13230 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[StudyStart]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “30601” was not registered in the character string database.
13270 FFInput
[%s] %s (%s) : An Illegal Film Mark Character Was Detected
The film mark database is damaged.
13271 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[FIX]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “33502” was not registered in the character string database.
020-221-01E 04.28.2009 FM5535
Remarks
Reinstall the system.
CR-IR 391CL Service Manual
Appx MT 1-81
Appx MT 1-82 Event
Event Source
Description
Causes
Remedies
13272 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Skfix]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “33503” was not registered in the character string database.
13273 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[SEMI-X]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “33504” was not registered in the character string database.
13274 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[DensityAverage]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “33505” was not registered in the character string database.
13275 FFInput
[%s] %s (%s) : [Utility]Button Image Get Error
“Id_Utility_U.bmp”/“Id_Utility_D.bmp”/“Id_ Utility_X.bmp” was not found in the path to an image folder or the image format was illegal.
13276 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Alarm Stop]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “32700” was not registered in the character string database.
13277 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Exit]
The image database was damaged.
Reinstall the system.
13278 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[User Utility]
The image database was damaged.
Reinstall the system.
13279 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[List Setting]
The image database was damaged.
Reinstall the system.
13280 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Version]
The image database was damaged.
Reinstall the system.
13281 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[CANCEL]
The image database was damaged.
Reinstall the system.
13282 FFInput
[%s] %s (%s) : [Clear]Button Image Get Error
The bmp file path/bmp file was abnormal.
Reinstall the system.
13283 FFInput
[%s] %s (%s) : [Clear]Button ToolTipText Get Error
The image database was damaged.
Reinstall the system.
13284 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[CANCEL]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “35000” was not registered in the character string database.
13285 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[DUST]
The “LangStrDB” key was not found in Reinstall the system. Directory.ini or the ID “35001” was not registered in the character string database.
13286 FFInput
[%s] %s (%s) : Tooltip Text Get Error
The image database was damaged.
Reinstall the system.
13287 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[TitleBar]
The image database was damaged.
Reinstall the system.
13288 FFInput
[%s] %s (%s) : Failed in Caption Acquisition[Option]
The image database was damaged.
Reinstall the system.
020-221-01E 04.28.2009 FM5535
Remarks
There is no operational problem (the button might not normally be displayed). If you feel uncomfortable, reinstall the CR-IR 391CL.
CR-IR 391CL Service Manual
Appx MT 1-82
Appx MT 1-83 Event
Event Source
Description
Causes
Remedies
13289 FFInput
[%s] %s (%s) : Version Info Get Error
The registry was damaged.
Reinstall the system.
13290 FFInput
[%s] %s (%s) : Option List Get Error
The registry was damaged.
Reinstall the system.
13304 FFInput
[%s] %s (%s) : Image Data Connection Disconnected
The line was abnormal.
Check the line.
13305 FFInput
[%s] %s (%s) : Multiple Study Cannot Be Executed
Program error.
13306 FFInput
[%s] %s (%s) : StudyList Has Not Been Selected
Program error.
13307 FFInput
[%s] %s (%s) : Control Initialize Error
Program error.
13308 FFInput
[%s] %s (%s) : Patient Info Read Error IdHome>
Program error.
13309 FFInput
[%s] %s (%s) : Failed in Patient Information
The patient information contained an illegal Ensure that the patient information does character string. not contain any illegal character string.
13345 FFIdDepartSelect
%1 (%2) : Database Data Get Error%n Database [%3]%n Table [%4]%n Key [%5]
The database was damaged.
Reinstall the system.
13345 FFIdParamedic Select
%1 (%2) : Database Data Get Error%n Database [%3]%n Table [%4]%n Key [%5]
The database was damaged.
Reinstall the system.
13345 FFIdPatInfoInput
%1 (%2) : Database Data Get Error%n Database [%3]%n Table [%4]%n Key [%5]
The database was damaged.
Reinstall the system.
13345 FFInput
%1 (%2) : Database Data Get Error%n Database [%3]%n Table [%4]%n Key [%5]
The database was damaged.
Reinstall the system.
13345 FFIdIndividualSelect
%1 (%2) : Database Data Get Error%n Database [%3]%n Table [%4]%n Key [%5]
The patient information contained illegal information.
Correct the patient information setup.
13347 FFInput
%1 (%2) : Caption Get Error%n CaptionId [%3]
The image database was damaged.
Reinstall the system.
13348 FFIdDepartSelect
%1 (%2) : Registry Data Get Error%n Value [%3]
The registry was damaged.
Reinstall the system.
13348 FFIdMenuChange
%1 (%2) : Registry Data Get Error%n Value [%3]
The registry was damaged.
Reinstall the system.
13348 FFIdParamedic Select
%1 (%2) : Registry Data Get Error%n Value [%3]
The registry was damaged.
Reinstall the system.
13348 FFIdPatInfoInput
%1 (%2) : Registry Data Get Error%n Value [%3]
The registry was damaged.
Reinstall the system.
13348 FFInput
%1 (%2) : Registry Data Get Error%n Value [%3]
The registry was damaged.
Reinstall the system.
13348 FFIdIndividualSelect
%1 (%2) : Registry Data Get Error%n Value [%3]
The registry was damaged.
13349 FFIdDepartSelect
%1 (%2) : INI File Data Get Error%n Key [%3]
Directory.ini was damaged.
Reinstall the system.
13349 FFIdMenuChange
%1 (%2) : INI File Data Get Error%n Key [%3]
Directory.ini was damaged.
Reinstall the system.
13349 FFIdParamedic Select
%1 (%2) : INI File Data Get Error%n Key [%3]
Directory.ini was damaged.
Reinstall the system.
13349 FFIdPatInfoInput
%1 (%2) : INI File Data Get Error%n Key [%3]
Directory.ini was damaged.
Reinstall the system.
13349 FFInput
%1 (%2) : INI File Data Get Error%n Key [%3]
Directory.ini was damaged.
Reinstall the system.
13349 FFIdIndividualSelect
%1 (%2) : INI File Data Get Error%n Key [%3]
Directory.ini was damaged.
Repair Directory.ini.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Remarks
Appx MT 1-84
Appx MT 1-85 Event
Event Source
Description
Causes
Remedies
13350 FFIdMenuChange
%1 (%2) : Bitmap Image Get Error%n BMP File [%3]
The bmp file path/bmp file was abnormal.
Reinstall the system.
13350 FFInput
%1 (%2) : Bitmap Image Get Error%n BMP File [%3]
The bmp file path/bmp file was abnormal.
Reinstall the system.
13351 FFInput
%1 (%2) : Search Number Check Error%nError [%3]
13352 FFInput
%1 (%2) : Dicom MWM & PPS Option Not Install
The DICOM MWM & PPS option was not installed.
Install the DICOM MWM & PPS option.
13353 FFInput
%1 (%2) : Dicom MWM Option Not Install
The DICOM MWM option was not installed. Install the DICOM MWM option.
13354 FFInput
%1 (%2) : Formality Function Steps Error
Program error.
13355 FFInput
%1 (%2) : Exception Error %3
Program error.
13356 FFInput
%1 (%2) : Control Initialize Error [%3]
Program error.
13357 FFInput
%1 (%2) : Get Control Instance Error [%3]
Program error.
13358 FFInput
%1 (%2) : Call Control Method [%3]
Program error.
13359 FFInput
%1 (%2) : Set Control Property [%3]
Program error.
13360 FFInput
%1 (%2) : Dicom Control Response Error [%3]
Program error.
13361 FFInput
%1 (%2) : Database Close Error%n Database [%3]%n
Program error.
13362 FFInput
%1 (%2) : Not Entry Host Name
The host name of the local equipment was With the Service Utility, register the host not successfully acquired. information about the PPS local equipment.
13363 FFInput
%1 (%2) : DDO File Not Found
Program error.
13364 FFInput
%1 (%2) : Memory Allocate Error [%3]
Program error.
13365 FFInput
%1 (%2) : Create Instance UID Error [%3]
Program error.
13366 FFInput
%1 (%2) : Get RecordSet Error [%3]
Program error.
13367 FFInput
%1 (%2) : RecordSet Not Found
Program error.
13368 FFInput
%1 (%2) : Copy VR Error
Program error.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Remarks
Appx MT 1-85
Appx MT 1-86 Event
Event Source
Description
Causes
Remedies
13369 FFInput
%1 (%2) : PPS Instance UID Issue Error
Program error.
13370 FFInput
%1 (%2) : PPS Request Failure [IN PROGRESS]
The equipment connection was faulty or the remote equipment power was OFF.
Retry.
13371 FFInput
%1 (%2) : PPS Request Failure [COMPLETED]
The equipment connection was faulty or the remote equipment power was OFF.
Retry.
13372 FFInput
%1 (%2) : PPS Request Failure [DISCONTINUED]
The equipment connection was faulty or the remote equipment power was OFF.
Retry.
13382 FFInput
%1 (%2) : Study List Refresh Exception%nError [%3]
An unknown error occurred.
Retry.
13383 FFInput
%1 (%2) : Failed in terminating process.%n Component Name [%3]
Program error.
13384 FFInput
%1 (%2) : The command of OnlineTypeB was received%n [Setting OnlineTypeA.]
Program error.
13385 FFInput
%1 (%2) : The command of OnlineTypeA was received%n [Setting OnlineTypeB.]
Program error.
13386 FFInput
%1 (%2) : Failed in data reception%n[Online Time Out]
The serial cable was cut, or the connected device did not respond.
13387 FFInput
%1 (%2) : Failed in data reception Program error. : (%3)%n[Online NG]
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1 (%2) : Shared Memory Delete Program error. Error [%3]
13419 FFInput
%1 (%2) : Failed in Menu Clear.%nInternal Error in IIP[%3]
Program error.
13445 FFInput
%1 (%2) : Failed in Ip Shelter.%nInternal Error in IIP [%3]
Program error.
13446 FFInput
%1 (%2) : Failed in Ip Set. %nInternal Error in IIP [%3]
Program error.
13447 FFInput
%1 : IipInput.exe [Starts]%n %2%n %3
IipInput.exe is started (information).
This is not error information.
13448 FFInput
%1 : IipInput.exe [Normal Termination]
IipInput.exe is terminated (information).
This is not error information.
13449 FFInput
%1 : IipInput.exe [Forced Termination]
IipInput.exe is terminated (information).
This is not error information.
13450 FFInput
%1 (%2) : Image Display Failure InImg>
Program error.
13451 FFInput
%1 (%2) : Failed in Get Ip Information Response. %nConnection Error to Builtin [%3]
The line was abnormal.
13453 FFInput
%1 (%2) : Failed in Range Over[%3: %4]
Program error.
FFInput
020-221-01E 04.28.2009 FM5535
Program error.
Check the 550X unit (power supply, cable, etc.).
CR-IR 391CL Service Manual
Appx MT 1-88
Appx MT 1-89 Event
Event Source
Description
Causes
Remedies
13454 FFInput
%1 (%2) : Failed in Ip Information Search. %nInternal Error in IIP
Program error.
13455 FFInput
%1 (%2) : Failed in Ip Information Search. %nTime Out
Program error.
13456 FFInput
%1 (%2) : Failed in Ip Information Search. %nExamination Register Error.[IDT4]
Program error.
13457 FFInput
%1 (%2) : Image Processing Information
This event occurs when an image processing parameter file is not found.
13458 FFInput
%1 (%2) : Failed in Connection Between Reader and Console. %nIIP[%3]%nRU[%4]
13463 FFInput
%1 (%2) : Send Data Error.[RIS]
Program error.
13464 FFInput
%1 (%2) : RIS Start Error.
Program error.
13465 FFInput
%1 (%2) : Change Error to Nondisplay Mode.[RIS]
Program error.
13466 FFInput
%1 (%2) : Change Error to Display Program error. Mode.[RIS]
13467 FFInput
%1 (%2) : Failed in Ordering Data. Program error. [RIS]
13468 FFInput
%1 (%2) : Exposure-Data Send Error.[RIS]
13469 FFInput
%1 (%2) : Examination-End Send Program error. Error.[RIS]
13470 FFInput
%1 (%2) : Exposure Menu Register Error.
The exposure menu received as the ordering information was not registered.
Register the exposure menu with the user utility.
13471 FFInput
%1 (%2) : All Exposure Menu Register Error.
The exposure menu received as the ordering information was not registered.
Register the exposure menu with the user utility.
13472 FFInput
%1 (%2) : Selected Menu is Done. The exposure process for the selected XCON Result Information is exposure menu was already performed. annulled. [%3] The result data received from the XCON will be discarded.
13473 FFInput
%1 (%2) : Menu is not Selected. XCON Result Information is annulled. [%3]
13474 FFInput
%1 (%2) : Exceeded the Limitation The XCON parameter was improperly set. Value of XCON Exposure Data. [%3 = %4]
13475 FFInput
%1 (%2) : Failed in Ordering Data. Illegal data was contained in the study [RIS] information received from the RIS.
13476 FFInput
%1 (%2) : Failed in Ordering Data Program error. Convert. Internal Error.
020-221-01E 04.28.2009 FM5535
Remarks
Change the SysConfig settings for the CR-IR 391CL or change the RU connection style.
Program error.
Select a menu for which an exposure process has not been performed.
No exposure menu was selected. The Select a menu for which an exposure result data received from the XCON will be process has not been performed. discarded. Reregister the XCON parameter with the user utility.
CR-IR 391CL Service Manual
Appx MT 1-89
Appx MT 1-90 Event
Event Source
Description
Causes
Remedies
13477 FFInput
%1 (%2) : Exposure Menu Register Error.
The exposure menu received as the ordering information was not registered.
Register the exposure menu with the user utility.
13478 FFInput
%1 (%2) : All Exposure Menu Register Error.
The exposure menu received as the ordering information was not registered.
Register the exposure menu with the user utility.
13479 FFInput
%1 (%2) : Failed in Examination End Command.[Ris]
The order exposure study termination signal was received from the RIS although an order exposure was not received.
Check the RIS settings.
13480 FFInput
%1 (%2) : Failed in Communication with RIS. [%3]%n[%4]
Program error. The problem is attributable to a disconnected line. Invalid parameter.
Check the equipment and cables.
13481 FFInput
%1 (%2) : Illegal Number of Selected Item
Program error.
13482 FFInput
%1 (%2) : Proc UID Get Error
Program error.
13483 FFInput
%1 (%2) : Menu is not Selected. Failed in Getting ID Information
An ID acquisition request was received from built-in type equipment although no exposure menu was selected.
Make a menu selection and then press the OK button on the built-in type Console.
13484 FFInput
%1 (%2) : Failed in the System Start. [Error: OpDcmStandardDx or MenuData.mdb]
Inappropriate installation.
Reinstall the system to secure matching between DX option and menu database.
%1 : Registry Value Get/Set Error Information was not successfully acquired [Key] %2 from the registry. [Exp] %3 %4 %5
020-221-01E 04.28.2009 FM5535
Remarks
(Not used.) Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
%1 : Database Data Get/Set Error A database information acquisition or [DB] %2 storage failed. [Table] %3 [Field] %4 [Exp] %5
(Not used.) Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
13903 FFInputEz
%1 : DDO Data Get/Set Error [Tag] %2 %3 %4 %5
The information acquisition/storage operation was not successfully performed in relation to the image information file (DDO).
(Not used.) Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Abnormal patient information was transmitted from the receipt computer.
Correct the abnormal patient information, and transmit the corrected patient information from the receipt computer.
(Not used.)
13910 FFInputEz
%1 : [Starts] %2 %3 %4 %5
(Not used.)
(Not used.)
(Not used.)
13911
FFInputEz
%1 : [Normal Termination] %2 %3 %4 %5
(Not used.)
(Not used.)
(Not used.)
13912 FFInputEz
%1 : [Forced Termination] %2 %3 %4 %5
(Not used.)
(Not used.)
(Not used.)
13998 FFInput
Undefined Error, Component is [%1], Procedure is [%2], Msg is [%3]
Program error.
13998 FFInput
%1 (%2) : [%3]
General information event log.
13999 FFIdDepartSelect
%1 (%2) : Unknown Error%n Error Code [%3]
Program error.
020-221-01E 04.28.2009 FM5535
An attempt to establish the connection to a Check whether the SQL service manager (Not used.) database failed. is operating normally. Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
This is not error information.
CR-IR 391CL Service Manual
Appx MT 1-91
Appx MT 1-92 Event
Event Source
Description
Causes
Remedies
Remarks
13999 FFIdMenuChange
%1 (%2) : Unknown Error%n Error Code [%3]
Program error.
13999 FFIdParamedic Select
%1 (%2) : Unknown Error%n Error Code [%3]
Program error.
13999 FFIdPatInfoInput
%1 (%2) : Unknown Error%n Error Code [%3]
Program error.
13999 FFInput
[%s] %s (%s) : %s> Unknown Error
Program error.
13999 FFIdIndividualSelect
%1 (%2) : Unknown Error%n Error Code [%3]
Program error.
14000 FFDataBaseCtrl
Logical Program Error. %n %1 %n %2
A program error occurred.
Restart the server computer.
(Not used.) [%1, %2]: Detailed information
14001 FFDataBaseCtrl
Catch Exception Error. %n %1 %n %2
An exception error occurred.
Restart the server computer.
(Not used.) [%1, %2]: Detailed information
14002 FFDataBaseCtrl
Retry is success. %n %1 %n %2
The database access was successfully retried.
There is no particular problem.
[%1, %2]: Detailed information
14003 FFDataBaseCtrl
Catch DB exception. %n %1 %n %2
A warning was issued when an attempt was made to access a database.
There is no particular problem.
[%1, %2]: Detailed information
14004 FFDataBaseCtrl
ADO Instance Error. %n %1 %n %2
An error occurred when an attempt was made to access a database.
Restart the server computer.
(Not used.) [%1, %2]: Detailed information
14005 FFDataBaseCtrl
DB Connect Error. %n %1 %n %2
An error occurred when an attempt was made to connect the database.
Restart the server computer.
(Not used.) [%1, %2]: Detailed information
14006 FFDataBaseCtrl
StoredParam Error. %n %1 %n %2
An error occurred when an attempt was made to access a database.
Restart the server computer.
(Not used.) [%1, %2]: Detailed information
14007 FFDataBaseCtrl
Variant Empty Error. %n %1 %n %2
An error occurred when an attempt was made to access a database.
Restart the server computer.
(Not used.) [%1, %2]: Detailed information
14008 FFDataBaseCtrl
Invalid Retry Num. %n %1 %n %2
An error occurred when an attempt was made to access a database.
Restart the server computer.
(Not used.) [%1, %2]: Detailed information
14009 FFDataBaseCtrl
Invalid Ex. %n %1 %n %2
An error occurred when an attempt was made to access a database.
Restart the server computer.
(Not used.) [%1, %2]: Detailed information
14625 FCRWeb
It failed in the convert of client IP_Address.
A program error occurred.
The program might be faulty. Check the operations performed before and after the error occurrence, and obtain the maintenance log with the Backup Utility. Send then the maintenance log to the manufacturer. Proceed with the processing.
14626 FCRWeb
It failed in the acquisition of the client mode.
A program error occurred.
The program might be faulty. Check the operations performed before and after the error occurrence, and obtain the maintenance log with the Backup Utility. Send then the maintenance log to the manufacturer. Proceed with the processing.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-92
Appx MT 1-93 Event
Event Source
Description
Causes
Remedies
Remarks
14900 FFInputEz
%1 : Registry Value Get/Set Error Information was not successfully acquired [Key] %2 from the registry. [Exp] %3 %4 %5
%1 : Database Data Get/Set Error A database information acquisition or [DB] %2 storage failed. [Table] %3 [Field] %4 [Exp] %5
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
14903 FFInputEz
%1 : DDO Data Get/Set Error [Tag] %2 %3 %4 %5
The information acquisition/storage operation was not successfully performed in relation to the image information file (DDO).
(Not used.) Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-01E 04.28.2009 FM5535
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
An attempt to establish the connection to a Check whether the SQL service manager database failed. is operating normally Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-93
Appx MT 1-94 Event
Event Source
Description
Causes
Remedies
Remarks
19227 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nPadding of IP-address is failed.
IP address padding failed due to an exception error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
19228 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nPadding of IP-address is failed.
IP address padding failed due to an exception error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
19400 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe uncertain cause error occurred.
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
19401 FFCustomMsgBox
An error has occurred.
An unknown error occurred.
Restart the server application and the client application. If the same error occurs, restart the system. If the system restarting does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
19706 GeneralImageInfo AccessCom
Logical error.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MT 1-94
Appx MT 1-95 Event
Event Source
Description
Causes
Remedies
Remarks
19900 FFInputEz
%1 : Registry Value Get/Set Error Information was not successfully acquired [Key] %2 from the registry. [Exp] %3 %4 %5
%1 : Database Data Get/Set Error A database information acquisition or [DB] %2 storage failed. [Table] %3 [Field] %4 [Exp] %5
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
19903 FFInputEz
%1 : DDO Data Get/Set Error [Tag] %2 %3 %4 %5
The information acquisition/storage operation was not successfully performed in relation to the image information file (DDO).
(Not used.) Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
The internal setup information was not successfully acquired.
Restart. If the same symptom recurs, perform a reinstallation.
20001 FFCtrlProc
It failed in CreateProcess. It has the possibility that an executive file doesn’t exist. The start treatment can’t be continued. /CtrlProc:RunProc () %1
Subprocess startup failed. The system is Restart. If the same symptom recurs, unstable or the necessary executable file is perform a reinstallation. missing.
20002 FFCtrlProc
Process start information is An illegal parameter was used for process unusual. The start treatment can’t startup. The contents of the process be continued. /CtrlProc:RunProc () information database might be incorrect.
Restart. If the same symptom recurs, perform a reinstallation.
20003 FFCtrlProc
It failed in the completion message preparation treatment. The treatment can’t be continued. /CtrlProc:EndProc ()
Restart.
020-221-01E 04.28.2009 FM5535
Restart the server application and client (Not used.) application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
An attempt to establish the connection to a Check whether the SQL service manager (Not used.) database failed. is operating normally. Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
A process termination request message was not successfully created. This error is attributable to resource insufficiency or system instability.
CR-IR 391CL Service Manual
(Not used.)
Appx MT 1-95
Appx MT 1-96 Event
Event Source
Description
Causes
Remedies
20004 FFCtrlProc
It failed in the completion message transmitting treatment. The treatment can’t be continued. /CtrlProc:EndProc ()
A process termination request message was not successfully transmitted. This error is attributable to an inoperative transmission destination process or an incorrect transmission destination.
Restart.
20005 FFCtrlProc
It failed in the switching message preparation treatment. The treatment can’t be continued. /CtrlProc:ChangeProc ()
The message for showing/hiding the window was not successfully generated. This error is attributable to resource insufficiency or system instability.
Restart.
20006 FFCtrlProc
It failed in the switching message transmitting treatment. The treatment can’t be continued. /CtrlProc:ChangeProc ()
The message for showing/hiding the window was not successfully transmitted. This error is attributable to an inoperative transmission destination process or an incorrect transmission destination.
Restart. If the same symptom recurs, perform a reinstallation.
20007 FFCtrlProc
It failed in CreateProcess. It has the possibility that an executive file doesn’t exist. The start treatment can’t be continued. /CtrlProc:SetInitProcEnd ()
Subprocess startup failed or the subprocess to be started was not found.
Restart. If the same symptom recurs, perform a reinstallation.
20052 FFCustomMsgBox
A data transfer error occurred in communications between processes.
The program might be stopped.
Restart the server computer.
20054 FFCustomMsgBox
An attempt to acquire system settings failed.
● The process can continue with the standard setting values though it may not function normally.
20062 FFCustomMsgBox
The automatic study data delete function went down because an error occurred in an attempt to automatically delete study data. A database access error occurred.
Restart the server computer.
20062 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nBecause the error had occurred, the Study DB capacity adjustment thread was stopped. \nPlease reactivate server PC.
20063 FFCustomMsgBox
The automatic image data delete function went down because an error occurred in an attempt to automatically delete image data.
020-221-01E 04.28.2009 FM5535
An internal system error occurred when an Restart. If the same symptom recurs, attempt was made to automatically delete perform a reinstallation. study data.
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-96
Appx MT 1-97 Event
Event Source
Description
Causes
20063 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nBecause the error had occurred, the HDD capacity adjustment thread was stopped. \nPlease reactivate server PC.
20064 FFCustomMsgBox
The automatic patient information delete function went down because an error occurred in an attempt to automatically delete patient information. A database access error occurred.
20064 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nBecause the error had occurred, the Patient DB capacity adjustment thread was stopped. \nPlease reactivate server PC.
20065 FFCustomMsgBox
A function to automatically delete uncontrolled/temporarily stored images went down because an error occurred with that processing. A database access error occurred.
20065 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nBecause the error had occurred, the Reference Images delete thread was stopped. \nPlease reactivate server PC.
20071 FFCustomMsgBox
[20071] Failed in the output of Just as the message states. image. > Check the study that is not yet output or the output device and try again.
020-221-02E 01.08.2010 FM5563
Remedies
An internal system error occurred when an Restart. If the same symptom recurs, attempt was made to automatically delete perform a reinstallation. image data.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
An internal system error occurred when an Restart. If the same symptom recurs, attempt was made to automatically delete perform a reinstallation. patient information.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
An internal system error occurred when an Restart. If the same symptom recurs, attempt was made to automatically delete perform a reinstallation. a temporal/stored image.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-97
Appx MT 1-98 Event
Event Source
Description
Causes
Remedies
Remarks
20072 FFCustomMsgBox
[20072] Failed in saving JPEG/ Just as the message states. BMP file as the Patient ID contains invalid character for file name. > Delete the following characters from the Patient ID and try again. + “¥”, “/”, “:” ,“*”, “?”, ““”, “<”, “>”, “|”
20073 FFCustomMsgBox
Initialization process of linkage with the receipt computer function failed.
● System settings may not have been finished correctly. Contact your service engineer.
20073 FFRoutine
ErrorCode:%1%nSubSystem:%2 The function for linkage with the receipt %nSourceFile:%3%nSpotCode:% computer was not successfully initialized. 4%nFFStdReceCom Initialize Error (FujitsuStdReceCom Initialize Error):%5%n
Check the system settings.
20074 FFCustomMsgBox
Patient information transferred from the receipt computer is illegal.
● Confirm the unregistered patient information and re-register.
20074 FFRoutine
ErrorCode:%1%nSubSystem:%2 Illegal patient information was transmitted %nSourceFile:%3%nSpotCode:% from the receipt computer. 4%nThe data received by the receipt computer is illegal.
Check for unregistered patient information, %1=Error Code: The code that uniquely and then perform the registration procedure identifies an error. again. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20075 FFCustomMsgBox
A communication error occurred with the receipt computer.
● Ensure that the network has been connected correctly to the receipt computer.
20075 FFRoutine
ErrorCode:%1%nSubSystem:%2 An abnormality occurred in the %nSourceFile:%3%nSpotCode:% communication with the receipt computer. 4%nAbnormality occurred by the communication with the receipt computer.
Check the network connection to the receipt computer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-98
Appx MT 1-99 Event
Event Source
Description
20076 FFCustomMsgBox
A creation of a patient information file failed while processing data from the receipt computer.
20076 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nIt failed in the generation of the patient information file.
20077 FFCustomMsgBox
An access to the patient information database failed while processing data from the receipt computer.
20077 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nIt failed in the access to the data base.
20078 FFCustomMsgBox
Processing a patient information file failed while handling data from the receipt computer.
20078 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nIt failed in the file processing of patient information.
20079 FFCustomMsgBox
A patient information file analysis failed while handling data from the receipt computer.
20079 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nIt failed in the analysis of the file of patient information.
020-221-02E 01.08.2010 FM5563
Causes
Remedies
Remarks
● Confirm the disk space and re-register. The patient information file was not successfully created when an attempt was made to process the data received from the receipt computer.
Check the amount of free disk space, and then perform the registration procedure again.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
● Restart the server computer and retry. Contact your service engineer if the same symptom recurs even after it has been restarted. The patient information database was not successfully accessed when an attempt was made to process the data received from the receipt computer.
Restart the server computer.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
● Confirm the unregistered patient information and re-register. The patient information file was not successfully processed when an attempt was made to process the data received from the receipt computer.
Check for unregistered patient information, %1=Error Code: The code that uniquely and then perform the registration procedure identifies an error. again. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). ● Confirm the unregistered patient information and re-register.
The patient information file was not successfully analyzed when an attempt was made to process the data received from the receipt computer.
Check for unregistered patient information, %1=Error Code: The code that uniquely and then perform the registration procedure identifies an error. again. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-99
Appx MT 1-100 Event
Event Source
Description
Causes
Remedies
Remarks
20080 FFCustomMsgBox
An acquisition of option information failed.
The process can continue with the standard setting values though it may not function normally.
20080 FFRoutine
ErrorCode:%1%nSubSystem:%2 The option information was not %nSourceFile:%3%nSpotCode:% successfully acquired. 4%nIt failed in the acquisition of option key information on receipt computer communication.\n The default value is used.
Install the option key for linkage with the receipt computer.
20081 FFCustomMsgBox
An Access to the directory setting file failed.
● The process can continue with the standard setting values though it may not function normally.
20081 FFRoutine
ErrorCode:%1%nSubSystem:%2 The directory setup file was not %nSourceFile:%3%nSpotCode:% successfully accessed. 4%nIt failed in the acquisition of directory information.\n The default value is used.\n
Reinstall the system.
20082 FFCustomMsgBox
A fatal error occurred in the linkage with the receipt computer.
● Restart the server computer and retry. Contact your service engineer if the same symptom recurs even after it has been restarted.
20082 FFRoutine
ErrorCode:%1%nSubSystem:%2 A fatal error occurred when an attempt was Restart the server computer. %nSourceFile:%3%nSpotCode:% made to execute the function for linkage 4%nThe fatal error occurred by with the receipt computer. the communication with the receipt computer.\nPlease reactivate server PC.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20102 FFCustomMsgBox
Setup incompleted.
Main
20104 FFCustomMsgBox
Failed in securing system settings. It is conceivable that the file was damaged Restart. If the same symptom recurs, or deleted. perform a reinstallation.
20104 FFMain
It failed in the acquisition of the configuration information. The initialization treatment can’t be continued. /MainProcess:Main ()
020-221-01E 04.28.2009 FM5535
Application key software is not installed.
An attempt to acquire the configuration information failed. The problem is attributable to improper installation or system instability.
Install the application key.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Main
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Appx MT 1-100
Appx MT 1-101 Event
Event Source
Description
Causes
Remedies
Remarks
20105 FFCustomMsgBox
Failed in accessing the process control database.
It is conceivable that the file was damaged Restart. If the same symptom recurs, or deleted. perform a reinstallation.
20105 FFMain
It failed in the acquisition of the process information data base. The initialization treatment can’t be continued. /MainProcess:Main ()
Data was not successfully acquired from the process information database. This error is attributable to improper installation or system instability.
20106 FFCustomMsgBox
Failed in accessing the message distribution control database.
It is conceivable that the file was damaged Restart. If the same symptom recurs, or deleted. perform a reinstallation.
20106 FFMain
It failed in opening of the message data base. The initialization treatment can’t be continued. /MainProcess:Main ()
The message database was not successfully opened. This error occurred due to an improper installation or system instability.
Restart. If the same symptom recurs, perform a reinstallation.
20108 FFCustomMsgBox
Failed in process activation.
A subprocess was not successfully started up for some reason.
View the event logs around to examine the Main cause.
20108 FFMain
It failed in the start of the subprocess. The initialization treatment can’t be continued. /MainProcess:Main ()
Subprocess startup failed. This error is attributable to improper installation or system instability.
Restart. If the same symptom recurs, perform a reinstallation.
20110
FFCustomMsgBox
Failed in initialization processing.
The subprocess failed to start up. It is conceivable that the system is unstable.
Restart. If the same symptom recurs, perform a reinstallation.
20110
FFMain
The subprocess failed to start up. It failed in the start of the subThis error is attributable to improper process. The initialization treatment can’t be continued. installation or system instability. /MainProcess:m_ProcessControl_ OnRunProcComplete ()
Restart. If the same symptom recurs, perform a reinstallation.
20118
FFCustomMsgBox
Failed in process termination.
Nothing particular.
20118
FFMain
It failed in the completion of the The subprocess was not successfully sub-process. /MainProcess:Proce terminated. It is conceivable that the ssEndRequirement () system was unstable.
Restart.
20124 FFCustomMsgBox
Failed in process switchover.
A subprocess was not successfully controlled for some reason.
View the event logs around to examine the Main cause.
20124 FFMain
It failed in switching of the process. /MainProcess:xxxxx
Subprocess changeover failed. This error is attributable to an inactive subprocess or system instability.
Restart.
20140 FFCustomMsgBox
Startup processing was discontinued because the SQL server was not up and running.
Restart the server computer.
020-221-01E 04.28.2009 FM5535
An error occurred for some reason during subprocess end processing
Main
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Main
Main
Main
Appx MT 1-101
Appx MT 1-102 Event
Event Source
Description
Causes
20140 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nBecause SQL Server did not operate, the start processing in the MainProcess was discontinued. %n Please reactivate server PC after installing SQL Server.
The startup process for the main process was aborted because the SQL server was not running.
Start the SQL server and restart the server %1=Error Code: The code that uniquely application. identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20141 FFCustomMsgBox
System startup processing aborted because the IIS has not started.
The IIS is not running.
Restart the server computer.
20141 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nBecause IIS (Internet Information Service) did not operate, the start processing in the MainProcess was discontinued. %n Please reactivate server PC after installing IIS.
The startup process for the main process was aborted because the IIS was not running.
Start the SQL server and restart the server %1=Error Code: The code that uniquely application. identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20143 FFCustomMsgBox
System startup processing aborted because Backup Utility, User Utility or Service Utility has started.
The Backup Utility, User Utility, or Service Utility is running.
Shutdown the Utility and retry.
20143 FFMain
Exit the utility and then restart the server ErrorCode:%1%nSubSystem:%2 The startup process for the main process %nSourceFile: %3%nSpotCode: was aborted because a utility was running. application. %4%nBecause utility started, the start processing in the MainProcess was discontinued. %n Please reactivate the MainProcess after ending utility.
20147 FFCustomMsgBox
Startup of Backup Utility failed.
20147 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the start of the backup utility.%n Please reactivate server PC.
20148 FFCustomMsgBox
Startup of Service Utility failed.
020-221-01E 04.28.2009 FM5535
Remedies
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An attempt to start the Backup Utility failed. Restart the server PC and then retry. This failure is attributable to OS resource insufficiency.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-102
Appx MT 1-103 Event
Event Source
Description
Causes
20148 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the start of the service utility.%n Please reactivate server PC.
20149 FFCustomMsgBox
Startup of User Utility failed.
20149 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the start of the user utility.%n Please reactivate server PC.
An attempt to start the User Utility failed. This error is attributable to OS resource insufficiency.
20154 FFCustomMsgBox
Failed in accessing the character string database.
The problem is attributable to the character string database.
20154 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed from LangStr.MDB to the acquisition of the character string.%n Please reactivate server PC.
20156 FFCustomMsgBox
System startup processing aborted because acquisition of software version information failed.
20157 FFCustomMsgBox
Event resources used for notifying the client of the server status could not be secured.
20157 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the notification that the server starts. %n Please reactivate server PC.
020-221-01E 04.28.2009 FM5535
The Service Utility was not successfully started. This error is attributable to OS resource insufficiency.
Remedies Restart the server PC and then retry.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. Restart the server PC and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
A character string was not successfully acquired from the character string database. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Registry information may have been damaged.
Restart the server computer.
Restart the server computer. The server startup status notification process failed. This error is attributable to OS resource insufficiency.
Restart the server application. If the same error recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Information (the information is set forth below). Server application version information.
Nothing particular.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20159 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in reading the Bitmap file.%n Please reactivate server PC.
An attempt to read the bitmap file failed. The file may be damaged.
Restart the server PC and retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20160 FFCustomMsgBox
Startup of the disk tool failed.
20160 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the start of the disk copy tool.%n Please reactivate server PC.
20161 FFCustomMsgBox
Writing the OS onto the event log was disabled.
20163 FFCustomMsgBox
The server application has already been up and running.
20167 FFMain
Checking of the endoscope image A failure occurred in an attempt to confirm reception of an endoscopic image folder. receiving folder has failed.%n Restart the server computer and check the setting for endoscope image import function.%n Contact your service engineer if the same symptom recurs even after it has been restarted. %n
Restart the server computer and check setup conditions of the endoscopic image import function. If the same error recurs, reinstall the program. If the situation still does not improve, check conditions of the error occurrence and submit the related event log to the manufacturer.
20200 FFCustomMsgBox
Initialization has incompleted. *Image viewer may not work correctly. Restart Client Application.
Restart the client application. If the problem still exists, contact your service engineer.
20300 FFCustomMsgBox
Use of these search conditions is disabled as they are in actual use at present.
020-221-02E 01.08.2010 FM5563
Restart the server computer. The disk copy tool was not successfully started. The error is attributable to OS resource insufficiency.
Restart the server PC and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
An exception might have occurred.
CR-IR 391CL Service Manual
Appx MT 1-104
Appx MT 1-105 Event
Event Source
Description
Causes
Remedies
20301 FFCustomMsgBox
Search conditions are deleted.
20303 FFCustomMsgBox
These search conditions cannot be changed because they have already been determined.
20305 FFCustomMsgBox
An attempt to acquire search conditions resulted in a failure.
Check connection to the server computer and then retry.
20306 FFCustomMsgBox
Display of search conditions edit window resulted in a failure.
Check connection to the server computer and then retry.
20307 FFCustomMsgBox
Storage of new search conditions resulted in a failure.
Check connection to the server computer and then retry.
20308 FFCustomMsgBox
Orderly arrangements of search conditions terminated abnormally.
Retry.
20309 FFCustomMsgBox
Storage of updated search conditions resulted in a failure.
Retry.
20311
FFCustomMsgBox
A failure occurred when setting initial search conditions.
Check connection to the server computer and then retry.
20312 FFCustomMsgBox
A failure occurred when setting initial search conditions.
20313 FFCustomMsgBox
A failure occurred when setting initial search conditions.
Check connection to the server computer and then retry.
20314 FFCustomMsgBox
An error occurred at startup of the image viewer.
Check connection to the server computer and then retry.
20315 FFCustomMsgBox
An error occurred at startup of the study start window.
Check connection to the server computer and then retry.
20316 FFCustomMsgBox
An error occurred at startup of the study edit window.
Check connection to the server computer and then retry.
20317 FFCustomMsgBox
An error occurred while handling lock processing to delete studies.
Check connection to the server computer and then retry.
20318 FFCustomMsgBox
An error occurred while handling unlock processing to delete studies.
Check connection to the server computer and then retry.
20319 FFCustomMsgBox
An error occurred in an attempt to acquire disk information.
Check connection to the server computer and then retry.
20320 FFCustomMsgBox
An error occurred in an attempt to acquire disk information.
Check connection to the server computer and then retry.
20321 FFCustomMsgBox
An error occurred when deleting a study.
Check connection to the server computer and then retry.
20322 FFCustomMsgBox
An error occurred at startup of the C@Rna study reservation window.
Check connection to the server computer and then retry.
020-221-02E 01.08.2010 FM5563
Remarks
Press OK to delete the search conditions. Otherwise, press Cancel.
Studies are locked by another user.
Unlock studies and retry.
CR-IR 391CL Service Manual
Appx MT 1-105
Appx MT 1-106 Event
Event Source
Description
Causes
Remedies
20323 FFCustomMsgBox
An error occurred during film output processing.
20324 FFCustomMsgBox
[20324] An error occurred while JPEG/BMP file is being output. > Check the connection to the network cable and try again. + If it does not resolve, contact your service engineer.
20325 FFCustomMsgBox
An error occurred during storage disk output processing.
Check connection to the server computer and then retry.
20326 FFCustomMsgBox
An error occurred during work disk output processing.
Check connection to the server computer and then retry.
20327 FFCustomMsgBox
An error occurred when processing transfer of image data to the C@Rna data center.
Check connection to the server computer and then retry.
20328 FFCustomMsgBox
Selected studies are deleted.
Press OK to delete the selected studies. Otherwise, press Cancel.
20330 FFCustomMsgBox
Necessary processing was disabled. Selected studies might have been deleted.
Retry.
20332 FFCustomMsgBox
A failure occurred when searching for study data within a disk
Check connection to the server computer and then retry.
20335 FFCustomMsgBox
[20335] Layout of the screen was Just as the message states. not performed correctly. *Ensure that the network cable has been connected correctly and retry. >Contact your service engineer if the same symptom recurs even after it has been retried.
20336 FFCustomMsgBox
Some of the studies have been locked.
20337 FFCustomMsgBox
All of the selected studies have been locked.
20338 FFCustomMsgBox
The current user will be logged off the system.
Press OK to log off. Otherwise, press Cancel.
20339 FFCustomMsgBox
Application will be terminated.
Press OK to shut down the system. Otherwise, press Cancel.
20341 FFCustomMsgBox
Communication with the EMR resulted in a failure.
Confirm connection to the EMR device and retry.
020-221-02E 01.08.2010 FM5563
Remarks
Check connection to the server computer and then retry. Just as the message states.
Press OK to continue the process. Otherwise, press Cancel. The study is locked by another user.
Unlock such studies and then retry.
CR-IR 391CL Service Manual
Appx MT 1-106
Appx MT 1-107 Event
Event Source
Description
Causes
Remedies
20342 FFCustomMsgBox
The system has not been logged on.
Retry after you have logged on the system.
20343 FFCustomMsgBox
The system has been logged off.
Retry after you have logged on the system.
20344 FFCustomMsgBox
The system has been either logged off or logged on by different users.
Retry after you have logged on the system.
20345 FFCustomMsgBox
You are not authorized to perform this operation.
Log onto the system with a properly authorized user name to retry this operation.
20346 FFCustomMsgBox
An error occurred.
Check the connection, and then retry.
20350 FFCustomMsgBox
The processing cannot be continued in the specified study.
The study is locked by another user.
20351 FFCustomMsgBox
[20351] A study is being performed *Please “Complete” or “Suspend” ongoing study. >If the computer currently in use is unable to check, the study may be used by other user. >Otherwise, please restart all computers of this system.
Just as the message states.
20352 FFCustomMsgBox
[20352] A study is being performed. *Please “Complete” or “Suspend” ongoing study. >If the computer currently in use is unable to check, the study may be used by other user. >Otherwise, please restart all computers of this system.
Just as the message states.
20353 FFCustomMsgBox
The study cannot be processed because it is controlled.
20354 FFCustomMsgBox
The study cannot be processed because it is uncontrolled.
20355 FFCustomMsgBox
[20355] The operation cannot be Just as the message states. performed because the study status is Reservation. *Please try again after completing the study.
20356 FFCustomMsgBox
[20356] The operation cannot be Just as the message states. performed because the study status is Exposing. *Please try again after completing the study.
020-221-02E 01.08.2010 FM5563
Remarks
Unlock such study and then retry.
CR-IR 391CL Service Manual
Appx MT 1-107
Appx MT 1-108 Event
Event Source
Description
Causes
Remedies
20357 FFCustomMsgBox
[20357] The operation cannot be performed because the study status is Finish Exposure. *This feature is available to the studies that have been “Verified”.
20358 FFCustomMsgBox
The operation cannot be performed because the study status is Verified.
20359 FFCustomMsgBox
The study cannot be processed because the storage/print status is Waiting.
20360 FFCustomMsgBox
The study cannot be processed because the storage/print status is Processing.
20361 FFCustomMsgBox
The study cannot be processed because storage or printing has already been done.
20362 FFCustomMsgBox
The study cannot be processed because it is locked so as not to be deleted.
20363 FFCustomMsgBox
The study cannot be processed because it is unlocked so as to be deleted.
20364 FFCustomMsgBox
The study cannot be processed because it is uncontrolled.
20365 FFCustomMsgBox
The study cannot be processed because there are some unexposed menus.
20366 FFCustomMsgBox
The study cannot be processed because all menus remain unexposed.
All menus are unexposed.
20367 FFCustomMsgBox
The study cannot be processed because all images are effective.
All images are effective.
20369 FFCustomMsgBox
An attempt to acquire IP address of this equipment resulted in a failure.
Retry after you have logged on the system.
20370 FFCustomMsgBox
An attempt to acquire IP address of the EMR resulted in a failure.
Retry after you have logged on the system.
20371 FFCustomMsgBox
Settings for the use of EMR have not been activated.
Activate the settings for the use, and then retry.
20375 FFCustomMsgBox
A failure occurred in an attempt to cancel image capture processing.
20376 FFCustomMsgBox
Image acquisition failed.
020-221-02E 01.08.2010 FM5563
Remarks
Just as the message states.
● Select “Image Viewer” to confirm the image.
CR-IR 391CL Service Manual
Appx MT 1-108
Appx MT 1-109 Event
Event Source
Description
Causes
Remedies
20377 FFCustomMsgBox
The drive is in use.
20378 FFCustomMsgBox
The drive has not been connected.
20379 FFCustomMsgBox
No available disk has been inserted.
20380 FFCustomMsgBox
[20380] Certain study could not be Just as the message states. imported. * If the disk is a PDI disk, view the image using a viewer provided with PDI. * When importing from other than a disk for storage, check the patient information, and set up the patient ID correctly.
20381 FFCustomMsgBox
No disk has been inserted into the selected drive.
20382 FFCustomMsgBox
Necessary processing is disabled to perform because the study includes mis-exposed images.
20383 FFCustomMsgBox
Necessary processing is disabled to perform because all images of the study are mis-exposed.
20384 FFCustomMsgBox
Necessary processing was disabled because a failure occurred in an attempt to acquire study status information from the database.
Retry.
20385 FFCustomMsgBox
Necessary processing was disabled because an exceptional error occurred.
Retry.
20390 FFCustomMsgBox
An error occurred when registering search conditions.
● Ensure that the network cable has been connected correctly and retry. Contact your service engineer if the same symptom recurs even after it has been retried.
20391 FFCustomMsgBox
Some of the studies cannot be handled.
❍ Do you wish to continue processing? Unexposed menus will be deleted. Studies that have no exposed menus will be deleted.
20392 FFCustomMsgBox
There are some studies including unexposed menu.
❍ Do you wish to delete unexposed menus? Studies that have no exposed menus will be deleted.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-109
Appx MT 1-110 Event
Event Source
Description
Causes
Remedies
20393 FFCustomMsgBox
The number of screens that can be displayed exceeded the allowable limit.
● Close some windows displaying and retry.
20394 FFCustomMsgBox
An error is received from the EMR.
● Contact your administrator.
20395 FFCustomMsgBox
A fatal error occurred.
● Contact your administrator.
20396 FFCustomMsgBox
No study of patient that is displayed on the EMR exists.
20397 FFCustomMsgBox
An attempt to acquire setting information of the EMR resulted in a failure.
● Restart this system and retry.
20398 FFCustomMsgBox
Selected image has already been deleted.
● Retrieve image data from disks for storage and retry.
20399 FFCustomMsgBox
Selected image of study exists in the local disk.
20400 FFCustomMsgBox
The following error occurred when deleting a study in which all menus remain unexposed.
20401 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe C@RnaURL collection is not made.
20401 FFCustomMsgBox
The following error occurred when deleting a study in which all menus remain unexposed.
20402 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe prohibited character is included. (%5)
An unacceptable character is included in Check the input value. the patient ID. You cannot use “ ”, “#”, “%”, “&”, “'”, “+”, “?”, “\”, “/”, “●”, “@”, 1-byte Katanaka characters, 2-byte characters, or a character string consisting of a blank only.
20402 FFCustomMsgBox
No disk is inserted or the disk has been exchanged for another one.
❍ Insert a correct disk.
020-221-02E 01.08.2010 FM5563
Remarks
● This study is being outputted. The C@RnaURL collection is not created.
Check that the C@Rna client is installed.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
● The study is locked to delete.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Input value ➔ Unacceptable characters that caused an error to occur.
Appx MT 1-110
Appx MT 1-111 Event
Event Source
Description
Causes
Remedies
20403 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to acquire C@RnaURL failed. %nSourceFile: %3%nSpotCode: %4%nIt failed in the acquisition of C@RnaURL.
20403 FFCustomMsgBox
Image acquisition is canceled.
20404 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe number of maximum bytes is exceeded. (%5)
20404 FFCustomMsgBox
The data received from the EMR is illegal.
20405 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe registry key is not found. (%5)
The registry key was not found.
20405 FFCustomMsgBox
The server device could not be accessed.
In an environment where multiple client Retry the operation. computers are connected, this can occur If the problem is not resolved, restart the when the study list window is operated with client application. a high server load.
20406 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe number of arrays of property specification values is not corresponding to the number of buttons.
An exception occurred when a method for Run Proc execution was used. An internal system error occurred.
020-221-02E 01.08.2010 FM5563
Check that the C@Rna client is installed.
The maximum permissible number of bytes Check the input value. was exceeded.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Input value
● Contact your administrator. Check the registry key.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Target registry key
Restart the server application and client %1=Error Code: The code that uniquely application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-111
Appx MT 1-112 Event
Event Source
Description
Causes
Remedies
20406 FFCustomMsgBox
The number of studies that can be displayed on Viewer exceeded the allowable limit.
20407 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed from character string DB to the acquisition of the character string list.
20407 FFCustomMsgBox
The set contents are possibly incorrect.
20408 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nProcessing has already been begun.
20408 FFCustomMsgBox
Failed in output process.
20409 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDevice List Get Error!
20409 FFCustomMsgBox
Patient ID entered includes characters prohibited to use.
● Following characters are not allowed to use for Patient ID. Re-input correctly. “ ” # %% && ’ + ? \ / ● @ en-size-kana em-size-characters spaces-only
20410 FCRWeb
ErrorCode:%1%nSubSystem:%2 The NetConfig.mdb file could not be %nSourceFile: %3%nSpotCode: opened. The file might be nonexistent or %4%nNetConfig.mdb Open Error! damaged.
Check NetConfig.mdb.
020-221-02E 01.08.2010 FM5563
Remarks
● Reduce the number of studies to be selected and retry. A character string list was not successfully acquired from the character string database. The LangStr.mdb file might be missing or damaged.
Check LangStr.mdb.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
● Input correctly. The request was ignored because the process for acquiring data from the media already started.
Carry it out again after a while.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
● Confirm the status of connection device. The equipment list could not be acquired. The NetConfig.mdb file might be missing or damaged.
Check NetConfig.mdb.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-112
Appx MT 1-113 Event
Event Source
Description
Causes
20411
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nProcessing has already been begun.
A process is already started.
20411
FFCustomMsgBox
[20411] An error occurred during the screen display processing. *Restart the client application. >If restarting does not resolve, contact your service engineer.
Since a process is being performed, wait a %1=Error Code: The code that uniquely while and then retry. identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Check that a medium is connected.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Details of requested acquisition
● System settings may not have been finished correctly. Contact your service engineer. All image for the study were not successfully acquired from the media. This error is attributable to an incorrect media connection setting, a disconnected media drive, or a damaged media drive.
With the Service Utility, check for incorrect %1=Error Code: The code that uniquely media connection settings. Also, check the identifies an error. DVD drive power supply and cable %2=Subsystem: The subsystem where an connections. error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value ● Restart the server computer and retry. Contact your service engineer if the same symptom recurs even after it has been restarted.
[20415] Failed in saving JPEG/ Just as the message states. BMP file as the Patient ID contains invalid character for file name. > Delete the following characters from the Patient ID and try again. + “¥”, “/”, “:” ,“*”, “?”, ““”, “<”, “>”, “|”
20416 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe search condition defined from the Hobbit server cannot be acquired.
Defined search conditions could not be acquired from the Hobbit server. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20417 FCRWeb
ErrorCode:%1%nSubSystem: %2%nSourceFile: %3%n SpotCode: %4%nThe numbering processing of the retrieval condition number failed.
The search condition numbering process was not successfully performed. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
One image for the study was not successfully acquired from the media. This error is attributable to an incorrect media connection setting, a disconnected media drive, or a damaged media drive.
With the Service Utility, check for incorrect %1=Error Code: The code that uniquely media connection settings. Also, check the identifies an error. DVD drive power supply and cable %2=Subsystem: The subsystem where an connections. error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value Contact your service engineer.
The image recorded on a medium was not successfully registered in the local equipment. This error is attributable to an incorrect media connection setting, a disconnected media drive, or a damaged media drive.
With the Service Utility, check for incorrect %1=Error Code: The code that uniquely media connection settings. Also, check the identifies an error. DVD drive power supply and cable %2=Subsystem: The subsystem where an connections. error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-114
Appx MT 1-115 Event
Event Source
Description
20418 FCRWeb
ErrorCode:%1%nSubSystem: %2%nSourceFile: %3%n SpotCode: %4%nThere is no pertinent retrieval condition.
20419 FCRWeb
Causes
Remarks
Restart the server application.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem: An attempt to update a database partly %2%nSourceFile: %3%n failed. The database might not be running. SpotCode:%4%nA part of renewal of DB failed.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20420 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe renewal of DB failed.
An attempt to update a database failed. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20421 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe renewal of DB failed. (%5)
An attempt to update a database failed. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value
20422 FCRWeb
ErrorCode:%1%nSubSystem:%2 The added search conditions could not be %nSourceFile: %3%nSpotCode: acquired. The database might not be %4%nThe added search condition running. cannot be acquired. (%5)
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value
020-221-02E 01.08.2010 FM5563
There is no pertinent retrieval condition.
Remedies
CR-IR 391CL Service Manual
Appx MT 1-115
Appx MT 1-116 Event
Event Source
Description
Causes
Remedies
Remarks
20423 FCRWeb
ErrorCode:%1%nSubSystem:%2 The added search conditions could not be %nSourceFile: %3%nSpotCode: acquired. The database might not be %4%nThe added search condition running. cannot be acquired.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20424 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nA part of renewal of DB failed.
An attempt to update a database partly failed. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20424 FFCustomMsgBox
Failed in displaying thumbnail images.
In an environment when multiple client computers are connected, this can occur when the server load is high and selected record switching etc. are performed repeatedly on the study list window. Click the update button on the study list window to display again.
Press the update button on the study list window for re-display.
20425 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe renewal of DB failed.
An attempt to update a database failed. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20426 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe search condition is not defined. (QuerySeq:%5)
The search conditions were not specified.
Check whether the ListConfigDB T_ MQUERY_DETAIL table and T_MQUERY record exist.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Query sequence number
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-116
Appx MT 1-117 Event
Event Source
Description
20427 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt started overwriting the search condition that had been selected in a different search condition.
20428 FCRWeb
Causes
Remarks
Nothing particular.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe search condition is not defined. (QueryKey:%5)
Check whether the ListConfigDB T_ MQUERY_DETAIL table and T_MQUERY record exist.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Search query key
20429 FCRWeb
ErrorCode:%1%nSubSystem:%2 The row for display is not selected. %nSourceFile: %3%nSpotCode: %4%nThe row for the display has not been selected.
Select a row.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20430 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe data type of the row cannot be specified.
The data type of the row cannot be identified. The program might be faulty.
Restart the server application and client %1=Error Code: The code that uniquely application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20431 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred when the retrieval was executed.
An error occurred during a search. The database might not be running.
Check that the SQL server is running.
020-221-02E 01.08.2010 FM5563
An attempt was made to overwrite the selected search conditions with different search conditions.
Remedies
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-117
Appx MT 1-118 Event
Event Source
Description
Causes
Remedies
Remarks
20432 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred when the retrieval was executed. (%5)
An error occurred during a search. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value
20433 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThere is no operation authority.
The current user does not have operating privilege.
Log in as a user with the operating privileges, and then perform the operation again.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20434 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt is not logged in.
The system has not been logged on.
If log-in is not achieved, log in.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20435 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt was logoffed.
You have been logged off the system.
Retry logging onto the system.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20436 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nUser ID is not found.
The user ID was not found.
If log-in is not achieved, log in.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-118
Appx MT 1-119 Event
Event Source
Description
Causes
Remedies
Remarks
20437 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nURL was not able to be acquired.
The URL could not be acquired. It is conceivable that the server is not connected.
20438 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in patient ID acquisition from the electronic clinical record device.
The patient ID was not successfully Check the connection to the electronic acquired from an electronic medical chart. medical chart. This error is attributable to an unconnected electronic medical chart.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20439 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the DB retrieval. (The patient’s all inspections are retrieved.)
A database search failed (when all patient studies were searched for). The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20440 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the mount.
Mounting failed.
Restart both the server PC and client PC
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20441 FCRWeb
ErrorCode:%1%nSubSystem:%2 The row for display is not selected. %nSourceFile: %3%nSpotCode: %4%nThe row for the display has not been selected.
Select a row.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
Check the connection to the server.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-119
Appx MT 1-120 Event
Event Source
Description
Causes
Remedies
Remarks
20442 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe data type of the row cannot be specified.
The data type of the row cannot be identified. The program might be faulty.
Restart the server application and client %1=Error Code: The code that uniquely application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20443 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred when the retrieval was executed.
An error occurred during a search. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20444 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred when the retrieval was executed. (%5)
An error occurred during a search (%5). The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value
20445 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the user information acquisition.
User information acquisition failed. The database might not be running.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20446 FCRWeb
ErrorCode:%1%nSubSystem:%2 The initial search conditions were not %nSourceFile: %3%nSpotCode: successfully updated. The database might %4%nIt failed in the initial retrieval not be running. condition update.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-120
Appx MT 1-121 Event
Event Source
Description
Causes
Remedies
Remarks
20447 FCRWeb
ErrorCode:%1%nSubSystem:%2 The initial search conditions were not %nSourceFile: %3%nSpotCode: successfully updated due to an exclusive %4%nThe initial retrieval condition error. update failed because of an exclusive error.
Check that the study list is activated by the %1=Error Code: The code that uniquely same user at another machine. identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20448 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed from character string DB to the acquisition of the character string list.
Check LangStr.mdb.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20449 FCRWeb
ErrorCode:%1%nSubSystem:%2 The character string was not found in the %nSourceFile: %3%nSpotCode: character string database (ID = %5). %4%nThe character string doesn’t The LangStr.mdb file might be damaged. exist in character string DB. (ID=%5)
Check LangStr.mdb.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Character string ID
20450 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe row number of inspection list bind data is not corresponding to the row number of Raoutoskema.
The number of study list bind data rows Restart the server application and client %1=Error Code: The code that uniquely does not agree with the number of layout application. If the same error recurs, identifies an error. schema rows. The program might be faulty. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20451 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe value list cannot be acquired.
The value list could not be acquired. The database might not be running.
020-221-02E 01.08.2010 FM5563
A character string list was not successfully acquired from the character string database. The LangStr.mdb file might be damaged.
Check that the SQL server is running.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-121
Appx MT 1-122 Event
Event Source
Description
Causes
Remedies
Remarks
20452 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe inspection is not specified.
No study was specified.
Select a study and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20453 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt is not logged in.
The system has not been logged on.
If log-in is not achieved, log in.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20454 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nBecause the time-out had been generated, it was logoffed.
Log-off occurred due to a timeout.
Retry logging onto the system.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20455 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe authority was checked by user ID different from the login user.
The user ID used for a privilege check did not match the log-in user. The program might be faulty.
Restart the server application and client %1=Error Code: The code that uniquely application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20456 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThere is no user authority.
You do not have user privileges.
Log in as a user with operating privileges.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-122
Appx MT 1-123 Event
Event Source
Description
Causes
Remedies
Remarks
20457 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe exception was generated by the operation authority check processing.
An exception occurred during an operating Restart both the server application and privilege check process. This is an internal client application. If the same error recurs, system error. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20458 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by the DB component (exclusive registration).
An error occurred in a database component Restart both the server application and (exclusive registration). client application. If the same error recurs, An internal system error occurred. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20459 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe exception was generated by the exclusive registration processing.
An exception occurred during an exclusive Restart both the server application and registration process. client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20460 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe exception was generated by initial processing of the inspection output.
An exception occurred during the study output initialization process. The program might be faulty.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20461 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in making XML for the output. (%5)
The output XML was not successfully Restart both the server application and created. An internal system error occurred. client application. If the same error recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=XML Filename
Appx MT 1-123
Appx MT 1-124 Event
Event Source
Description
Causes
Remedies
Remarks
Restart both the server application and client application. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20462 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the deletion of the exclusive registration ending inspection.
20463 FCRWeb
ErrorCode:%1%nSubSystem:%2 The URL was not successfully acquired. %nSourceFile: %3%nSpotCode: It is conceivable that the server is not %4%nIt failed in the acquisition of connected. URL. (%5)
Check the connection to the server.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value
20464 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by the patient information acquisition processing for the C@Rna inspection reservation specification. (%5)
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value
20465 FCRWeb
ErrorCode:%1%nSubSystem:%2 An attempt to acquire C@RnaURL failed. %nSourceFile: %3%nSpotCode: The C@RnaURL client might not exist. %4%nIt failed in the acquisition of C@RnaURL. (%5)
Check that the C@Rna client is installed.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value
020-221-02E 01.08.2010 FM5563
The exclusively registered study was not successfully deleted. An internal system error occurred.
An error occurred when a patient information acquisition process was performed for C@Rna study scheduling.
CR-IR 391CL Service Manual
Appx MT 1-124
Appx MT 1-125 Event
Event Source
Description
Causes
Remedies
Remarks
20466 FCRWeb
ErrorCode:%1%nSubSystem:%2 The study status was not successfully %nSourceFile: %3%nSpotCode: updated. The database might not be %4%nIt failed in the update of the running. inspection status.
Check that the SQL server is running.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20467 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed from character string DB to the acquisition of the character string list.
A character string list was not successfully acquired from the character string database. The LangStr.mdb file might be damaged.
Check LangStr.mdb.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20468 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt was not finding of ID in character string DB. (ID=%5)
The ID was not found in the character string database (ID = %5). The LangStr. mdb file might be damaged.
Check LangStr.mdb.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Character string ID
20469 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while outputting it. (ReturnCode=%5)
An error occurred during output. This is an internal system error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Return value
20470 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the deletion of the inspection.
Study deletion failed. An internal system error occurred.
Restart both the server PC and client PC
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-125
Appx MT 1-126 Event
Event Source
Description
Causes
20471 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe number of arrays of property specification values is not corresponding to the number of buttons.
An exception occurred when a method for Run Proc execution was used. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20472 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed from character string DB to the acquisition of the character string list.
A character string list was not successfully acquired from the character string database. The LangStr.mdb file might be damaged.
Check LangStr.mdb.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20473 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe number of arrays of property specification values is not corresponding to the number of buttons.
An exception occurred when a method for Run Proc execution was used. An internal system error occurred.
Restart the server application and client %1=Error Code: The code that uniquely application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
20474 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed from character string DB to the acquisition of the character string list.
A character string list was not successfully acquired from the character string database. The LangStr.mdb file might be damaged.
Check LangStr.mdb.
20484 FCRWeb
ErrorCode:%1%nSubSystem:%2 The patient information file (Karte.xml) was Check whether Karte.xml is damaged or %nSourceFile:%3%nSpotCode:% not successfully monitored. contains wrong data. Also, check whether 4%nSystem Exception Error. the image link function is improperly set.
20560 FFCustomMsgBox
Deletion of study has failed.
020-221-02E 01.08.2010 FM5563
This can occur when study deletion is performed simultaneously from multiple computers. (The studies are different studies.)
Remedies
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Retry the operation. If the problem is not resolved, restart the client application.
CR-IR 391CL Service Manual
Appx MT 1-126
Appx MT 1-127 Event 20611
Event Source FFCustomMsgBox
Description [20611] Failed in saving the system settings.
Causes Environmental failure such as communication failure or database failure has occurred.
Remedies Contact your customer service.
20622 Error
[20622] An attempt to acquire Not used. (does not occur) information from the EMR failed. *Please check the display of EMR, and try again. >Contact your service engineer if the same symptom recurs even after it has been retried.
20623 FFCustomMsgBox
[20623] An error occurred when study started. *Restart the system. >If the same symptom recurs even after performing the above, contact our service engineer.
An exception due to incapability to retrieve Restart. If the same symptom recurs, parameters such as user/service settings. contact your service engineer. If the setting file is damaged, reinstall it.
20635 Error
[20635] A fatal error occurred. *Restart the system. >If the same symptom recurs even after performing the above, contact our service engineer.
An exception that occurs in communication with electric medical charts. The cause is probably the incapability to retrieve parameters such as user/service settings.
20662 FFCustomMsgBox
[20662] An attempt to register new study failed. *The original information may have been deleted.
Cannot be restored if already deleted. If A study of the same menu could not be registered when executing the DO function disabled, enable it, and the study can be due to the specified study has been registered. deleted or disabled.
20663 FFCustomMsgBox
[20663] Failed in displaying the Edit/Re-Study screen. *Restart the client application. >If restarting does not resolve, contact your service engineer.
Error that infrequently occurs
1. Click the button again. 2. Restart the client application. 3. Restart the client PC. 4. Restart the server PC.
20664 FFCustomMsgBox
[20664] Failed in displaying the Free-Layout screen. *Restart the client application. >If restarting does not resolve, contact your service engineer.
Error that infrequently occurs
1. Click the button again. 2. Restart the client application. 3. Restart the client PC. 4. Restart the server PC.
20665 FFCustomMsgBox
[20665] Failed in starting the application. *Only available in the installed equipment.
An external application such as electrocardiogram viewer is not installed, or the installation directory path is different from the setting.
Install the said application. Or, if the device that is used are different for each use, make setting so that the button is not displayed. * The setting for display/hide the button is not for each device, but for each user.
20679 FFCustomMsgBox
[20679] Failed in access to the server. There are too many users accessing the server at this time. *After a brief moment, please try again.
A request is denied due to excessive access to the server device.
1. Try again after a while. 2. Close the unused applications.
020-221-02E 01.08.2010 FM5563
Remarks
Restart. If the same symptom recurs, contact your service engineer. Verify the connection setting between electric medical charts and CR-IR 391CL. If the setting file is damaged, reinstall it.
CR-IR 391CL Service Manual
Appx MT 1-127
Appx MT 1-128 Event
Event Source
Description
Causes
Remedies
20700 FFCustomMsgBox
[20700] Approaching the limit of Capacity of either StudyDB or PatientDB is Contact your customer service. the database file size. approaching to its limit. *You need to upgrade the database. >Because the system will become unable to operate, please contact your service engineer immediately.
20701 FFCustomMsgBox
[20701] There is not enough hard Not enough hard disk space for the entire disk space required to operate the system. system. *You need to add a hard drive. >Because the system will become unable to operate, please contact your service engineer immediately.
Add a NAS.
20702 FFCustomMsgBox
[20702] Initialization process failed. *Restart the server computer. >Contact your service engineer if the same symptom recurs even after it has been restarted.
Failure.
Restart both the server application and the client application. If the problem still exists or the same symptom recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
20703 FFCustomMsgBox
[20703] Failed in access to a network hard drive. *Please check the status of the power and network connections. >If the problem persists, please contact your service engineer for maintenance.
Not connected to the NAS.
Confirm the network connection to the NAS and the power of the NAS.
20704 FFCustomMsgBox
[20704] Failed in processing the data transfer. *Please check the status of the power and network connections. >If the problem persists, please contact your service engineer for maintenance.
Not connected to the NAS. Or failure
Confirm the network connection to the NAS and the power of the NAS.
20705 FFCustomMsgBox
Not connected to the NAS. [20705] Failed in configuring a network drive and obtaining information. *Please check the power of a hard drive and network connections, and try again.
Confirm the network connection to the NAS and the power of the NAS.
20706 FFCustomMsgBox
[20706] Backup process failed. Not connected to the NAS. *Please check the power of a hard Or failure drive and network connections. >If the problem persists, please contact your service engineer for maintenance.
Confirm the network connection to the NAS and the power of the NAS.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-128
Appx MT 1-129 Event
Event Source
Description
Causes
Remedies
Remarks
20707 FFCustomMsgBox
[20707] A timeout occurred. *Restart the system and make a backup again. >If the problem persists, please contact your service engineer for maintenance.
Failure.
Restart both the server application and the client application. If the problem still exists or the same symptom recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
20720 FFCustomMsgBox
[20720] Failed in exporting database > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
Occurs when failed to importing the breed and species csv file.
Just as the message states.
Only for veterinary hospital.
20721 FFCustomMsgBox
[20721] Failed in importing database. > Check “Error.log” file in the selected folder and try again.
Occurs when failed to importing the breed and species csv file.
Just as the message states.
Only for veterinary hospital.
20724 FFCustomMsgBox
[20724] Failed in importing database. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
Occurs when failed to importing the breed and species csv file.
Just as the message states.
Only for veterinary hospital.
20725 FFCustomMsgBox
[20725] Failed in reading in CSV file. > Check the data and character string of the file and try again.
Occurs when failed to importing the breed and species csv file.
Just as the message states.
Only for veterinary hospital.
20727 FFCustomMsgBox
[20727] Failed in obtaining information from database. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
Just as the message states.
Only for veterinary hospital.
20728 FFCustomMsgBox
[20728] Failed in registering for database. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
Just as the message states.
Only for veterinary hospital.
20760 FFCustomMsgBox
[20760] Failed in registering the study. *Restart the server computer. >Contact your service engineer if the same symptom recurs even after it has been restarted.
This error is attributable to an inactive server application.
020-221-02E 01.08.2010 FM5563
● Restart the server computer and retry. ● Contact your service engineer if the same symptom recurs even after it has been restarted.
CR-IR 391CL Service Manual
Appx MT 1-129
Appx MT 1-130 Event
Event Source
Description
Causes
Remedies
20785 FFCustomMsgBox
[20785] Failed in initializing the list. *Restart the server computer. >Contact your service engineer if the same symptom recurs even after it has been restarted.
An exception might have occurred during the initialization process for the list.
Just as the message states.
20786 FFCustomMsgBox
[20786] Failed in initializing the list. *Restart the server computer. >Contact your service engineer if the same symptom recurs even after it has been restarted.
An exception might have occurred during the study data retrieving process from the list.
Just as the message states.
20787 FFCustomMsgBox
[20787] Failed in updating the list. An exception might have occurred during the updating process after retrieving the *Please update the list again. >Contact your service engineer if study data from the list. the same symptom recurs even after it has been updated.
Just as the message states.
20788 FFCustomMsgBox
[20788] Failed in updating the list. An exception might have occurred during the study data retrieving process from the *Please update the list again. >Contact your service engineer if list. the same symptom recurs even after it has been updated.
Just as the message states.
20789 FFCustomMsgBox
[20789] Failed in updating the list. An exception might have occurred during the study data retrieving process from the *Please update the list again. >Contact your service engineer if list. the same symptom recurs even after it has been updated.
Just as the message states.
20790 FFCustomMsgBox
[20790] Failed in starting up the Indicator. *Restart the server computer. >Contact your service engineer if the same symptom recurs even after it has been restarted.
An exception might have occurred during the initialization process for the indicator.
Just as the message states.
20814 FFCustomMsgBox
[20814] An error occurred while acquiring Patient information. > Check network cable for proper connection. > Ensure if the device runs properly in case it is connected to MWM device. * If the above does not resolve, contact your service engineer.
Occurs when failed in the communication with the DICOM MWM gateway.
Check the operation of the DICOM MWM gateway and the settings.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-130
Appx MT 1-131 Event
Event Source
Description
Causes
Remedies
Remarks
20815 FFCustomMsgBox
[20815] An error occurred while acquiring Species information. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
Just as the message states.
Only for veterinary hospital.
20816 FFCustomMsgBox
[20816] An error occurred while acquiring Breed information. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
Just as the message states.
Only for veterinary hospital.
20828 FFCustomMsgBox
[20828] An error occurred in converting the unit of measure of body length. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
Just as the message states.
20829 FFCustomMsgBox
Does not occur normally. [20829] An error occurred while converting the unit of measure for Weight. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
21001 FFCustomMsgBox
Failed in connecting to the image database.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
List
21002 FFCustomMsgBox
Initialization of the image database failed.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
List
21003 FFCustomMsgBox
Failed in information acquisition from the image database.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
List
020-221-02E 01.08.2010 FM5563
Just as the message states.
CR-IR 391CL Service Manual
Appx MT 1-131
Appx MT 1-132 Event
Event Source
Description
Causes
Remedies
Remarks
21004 FFCustomMsgBox
Initialization of the image database failed.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
List
21005 FFCustomMsgBox
Failed in setting information to the The problem is attributable, for instance, to Check whether the SQL service manager image database. an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
List
21006 FFCustomMsgBox
Failed in deleting the study information.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
List
21007 FFCustomMsgBox
Failed in connecting to the system It is conceivable that the database file was setting database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21008 FFCustomMsgBox
Failed in accessing the system setting database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21009 FFCustomMsgBox
Failed in information acquisition It is conceivable that the database file was from the system setting database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21010 FFCustomMsgBox
Failed in connecting to the character database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21011
Failed in accessing the character string database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21012 FFCustomMsgBox
Failed in obtaining the information It is conceivable that the database file was from the character string damaged or deleted. database.
Restart. If the same symptom recurs, perform a reinstallation.
List
21013 FFCustomMsgBox
Failed in accessing the definition file.
It is conceivable that the file was damaged Restart. If the same symptom recurs, or deleted. perform a reinstallation.
List
21014 FFCustomMsgBox
Failed in opening the registry information.
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21015 FFCustomMsgBox
Failed in retrieving the registry information.
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21016 FFCustomMsgBox
Failed in writing the registry information.
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21017 FFCustomMsgBox
Failed in closing the registry information.
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21018 FFCustomMsgBox
Failed in receiving message.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-132
Appx MT 1-133 Event
Event Source
Description
Causes
Remedies
Remarks
21019 FFCustomMsgBox
Failed in canceling the output processing.
The selected image was being output or already deleted.
Nothing particular.
List
21020 FFCustomMsgBox
Failed in output.
The selected image was being output or already deleted.
Nothing particular.
List
21021 FFCustomMsgBox
Failed in receiving message.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21022 FFCustomMsgBox
Failed in initializing process for message communication.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21023 FFCustomMsgBox
Failed in terminating process for message communication.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21024 FFCustomMsgBox
Failed in acquiring the host setting It is conceivable that the database file was database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21025 FFCustomMsgBox
Failed in editing the host setting database.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21030 FFCustomMsgBox
Failed in study start.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21031 FFCustomMsgBox
Failed in QA start.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21032 FFCustomMsgBox
Failed in study re-start.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21033 FFCustomMsgBox
Failed in obtaining study information from host %s.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21034 FFCustomMsgBox
Failed in locking the study.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21035 FFCustomMsgBox
Failed in study completion processing.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21036 FFCustomMsgBox
The target study exists but is not displayed on the list.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21037 FFCustomMsgBox
The target study could not be found.
A specified study has already been deleted.
Nothing particular.
List
21038 FFCustomMsgBox
The input format for date is wrong. The input format was incorrect.
Nothing particular.
List
21039 FFCustomMsgBox
The input format for time is wrong. The input format was incorrect.
Nothing particular.
List
21040 FFCustomMsgBox
Searched word is illegal.
The input word was incorrect.
Nothing particular.
List
21041 FFCustomMsgBox
Multiple target studies exist. The study cannot be started.
Two or more relevant studies existed.
Nothing particular.
List
21051 FFCustomMsgBox
Unidentified study has been received from RIS.
Illegal data was contained in the study information received from the RIS.
Check the RIS side setup information and the like.
List
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-133
Appx MT 1-134 Event
Event Source
Description
Causes
Remedies
21055 FFCustomMsgBox
There was no automatically deletable study data.
Perform the following remedial actions: Check the contents of the study and then perform the determination procedure. Unlock unnecessary locked studies. Check the output queue and delete any unnecessary studies.
21055 FFRoutine
ErrorCode:%1%nSubSystem:%2 Deletable study data was not found. %nSourceFile: %3%nSpotCode: %4%nThe Study data that can be deleted is not found. \nPlease confirm the study list.
Restart. If the same symptom recurs, perform a reinstallation.
21056 FFCustomMsgBox
There was no automatically deletable image data.
Perform the following remedial actions: Check the contents of the study and then perform the determination procedure. Unlock unnecessary locked studies. Check the output queue and delete any unnecessary studies. Delete unnecessary files from the hard disk.
21056 FFRoutine
ErrorCode:%1%nSubSystem:%2 Deletable image data was not found. %nSourceFile: %3%nSpotCode: %4%nThe Image data that can be deleted is not found. \nPlease confirm the study list.
Restart. If the same symptom recurs, perform a reinstallation.
21057 FFCustomMsgBox
There was no automatically deletable patient information.
21057 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe Patient data that can be deleted is not found. \nPlease confirm the study list.
21067 FFCustomMsgBox
An error occurred in settings for automatically determining a physician’s name, which consequently skipped automatic determination processing.
020-221-02E 01.08.2010 FM5563
Deletable patient information was not found. The program might be faulty.
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server application and client %1=Error Code: The code that uniquely application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). Start the User Utility and review the settings for automatically determining a physician’s name.
CR-IR 391CL Service Manual
Appx MT 1-134
Appx MT 1-135 Event
Event Source
Description
Causes
21067 FFRoutine
ErrorCode:%1%nSubSystem:%2 The automatic verification user was not %nSourceFile: %3%nSpotCode: set, or the setup information was %4%nVerify Doctor setting error. \ inconsistent. nPlease confirm the inspection list.
21101
FFCustomMsgBox
An error of unknown cause occurred.
An error of unknown cause occurred. It is not possible to continue image transfer processing.
21102
FFCustomMsgBox
Failed in obtaining the study information.
A specified study has already been deleted.
21103
FFCustomMsgBox
It can’t be designated as a source.
21104
FFCustomMsgBox
It can’t be designated as a source.
21105
FFCustomMsgBox
The image couldn’t be moved.
21106
FFCustomMsgBox
The indication error of the study information occurred. ?????
21129
FFCustomMsgBox
The hard disk is full.
21144
FFCustomMsgBox
No backup copies have been made for a certain period of time.
The disk has no free space.
Remedies
Remarks
With the Client Utility, review the setup %1=Error Code: The code that uniquely information about the automatic verification identifies an error. user. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Delete unnecessary study information.
List
In compliance with the on-screen instructions, specify whether or not to start the Backup Utility.
21201 FFCustomMsgBox
An error of unknown cause occurred.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21202 FFCustomMsgBox
Failed in initialization processing.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21203 FFCustomMsgBox
Radiographer information database is abnormal.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21204 FFCustomMsgBox
Failed in obtaining the registry information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21205 FFCustomMsgBox
Failed in setting registry values.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21206 FFCustomMsgBox
Failed in clearing a displayed image.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21207 FFCustomMsgBox
Failed in connecting to the database.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21208 FFCustomMsgBox
Failed in connecting to the database.
Connection equipment was not operative or the network was unstable.
Check the connected equipment or network.
List
21209 FFCustomMsgBox
Failed in setting the host sharing study information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-135
Appx MT 1-136 Event
Event Source
Description
Causes
Remedies
Remarks
21210 FFCustomMsgBox
Failed in obtaining the study information from the database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
List
21211
An error of unknown cause It is conceivable that the database file was occurred in obtaining radiographer damaged or deleted. information.
Restart. If the same symptom recurs, perform a reinstallation.
List
21212 FFCustomMsgBox
An error of unknown cause occurred.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21213 FFCustomMsgBox
An error of unknown cause occurred. Study information cannot be obtained.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
List
21609 FFCustomMsgBox
[21609] The current user will be logged off the system. +Are you sure?
The logoff button is clicked.
If it is intended, click the OK button. If not, click the cancel button.
21610 FFCustomMsgBox
[21610] Application will be terminated. +Are you sure?
The exit button is clicked.
If it is intended, click the OK button. If not, click the cancel button.
21628 Warning
Displayed when an unexpected error [21628] An unexpected error occurs in the connection with the receipt occurred when trying to acquire computer. the patient information. *Ensure that the network cable has been connected correctly and retry. *If you are connected to the receipt computer, please check if the device is operating normally. > Contact our service engineer for maintenance if these steps do not resolve the issue.
Just as the message states.
21636 Warning
[20636] Communication with the EMR failed. *Confirm connection to the EMR device and retry.
Occurs in case of abnormal parameter of the electronic medical chart connection.
Verify the communication settings between electronic medical chart and CR-IR 391CL.
21637 Warning
[21637] An error is received from the EMR. *Contact your service engineer.
Occurs when the cable format for the communication with the electronic medical chart is abnormal.
Verify the communication settings between electronic medical chart and CR-IR 391CL.
21638 Warning
[21638] A fatal error occurred. *Contact your service engineer.
Occurs when the cable for the communication with the electronic medical chart cannot be analyzed.
Verify the communication settings between electronic medical chart and CR-IR 391CL.
21640 Warning
[21640] An attempt to acquire information from the EMR failed. > Confirm connection to the electronic medical chart device and retry communication. Continue processing if no information is acquired from the electronic medical chart device.
The prior connection with the electronic medical chart fails, or a trouble including a physical factor other than the mentioned above.
Verify the physical connection and the communication settings between electronic medical chart and CR-IR 391CL.
FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-136
Appx MT 1-137 Event
Event Source
Description
Causes
21660 FFCustomMsgBox
[21660] Image reading operation is in process. *Please “Complete” or “Suspend” ongoing study, and retry again.
21661 FFCustomMsgBox
[21661] An attempt to register new The DO function was executed for a study study failed. that had been retrieved from a disc or *This kind of study cannot be exposed with an external device. registered.
21666 FFCustomMsgBox
[21666] Selected study cannot be displayed in Image Viewer.. *Please select the completed studies.
The Image Viewer button is clicked while selecting a reserved study or a study that was being exposed.
21737 FFCustomMsgBox
[21737] Failed in editing operation. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
Just as the message states.
21811
FFCustomMsgBox
[21811] A study is being performed. *Please “Complete” or “Suspend” ongoing study. >If the computer currently in use is unable to check, the study may be used by other user. >Otherwise, please restart all computers of this system.
Just as the message states.
21817 FFCustomMsgBox
[21817] The body length contains illegal character. > Only single-byte numerical characters and period (.) are allowed for Body length. Enter again.
Just as the message states.
21818 FFCustomMsgBox
[21818] The Weight contains illegal character. > Only single-byte numerical characters and period (.) are allowed for Weight. Enter again.
Just as the message states.
21819 FFCustomMsgBox
[21819] The Species contains Just as the message states. illegal character. > The characters below cannot be used for Breed. Enter again. ”#%&+?\*@
020-221-02E 01.08.2010 FM5563
There is a study whose Take X-rays window is left open on the PC in-use.
Remedies
Remarks
Finish or pause the exposure, and close the Take X-rays window. The DO function can only be executed for a study retrieved from an RU. However, even for a study retrieved from the RU, the DO function cannot be executed if it is deleted once, and then imported from a storage DVD. Just as the message states.
Only for veterinary hospital.
Only for veterinary hospital.
CR-IR 391CL Service Manual
Appx MT 1-137
Appx MT 1-138 Event
Event Source
Description
Causes
Remedies
Remarks
21820 FFCustomMsgBox
[21820] The Breed contains illegal Just as the message states. character. > The characters below cannot be used for Species. Enter again. ”#%&+?\*@
Only for veterinary hospital.
21821 FFCustomMsgBox
[21821] The Responsible person Just as the message states. contains illegal character. > Any double-byte characters and the characters below cannot be used for Responsible person. Enter again. ”#%&+?\*@
Only for veterinary hospital.
21822 FFCustomMsgBox
Just as the message states. [21822] The Responsible organization contains illegal character. > The characters below cannot be used for Responsible organization. Enter again. ”#%&+?\*@
Only for veterinary hospital.
22054 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nSystem setting value acquisition error.\nThe default value is used.
Values could not be acquired from the system setup database. The process will be continued by using default values for some settings.
Check to ensure that the Service Utility settings are correct. If it does not help, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
22058 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe processing failure was done by the Study DB capacity adjustment thread. \nHowever, the process continues.
An error occurred when an attempt was made to automatically delete study data. . For a detailed description of the cause of the error, refer to the FFDBCom event information.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
22059 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe processing failure was done by the HDD capacity adjustment thread. \nHowever, the process continues.
An error occurred when an attempt was made to automatically delete image data. For a detailed description of the cause of the error, refer to the FFDBCom event information.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-138
Appx MT 1-139 Event
Event Source
Description
Causes
Remedies
Remarks
22060 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe processing failure was done by the Patient DB capacity adjustment thread. \nHowever, the process continues.
An error occurred when an attempt was made to automatically delete patient information. For a detailed description of the cause of the error, refer to the FFDBCom event information.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
22061 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe processing failure was done by the Reference Images delete thread. \nHowever, the process continues.
An error occurred when an attempt was made to automatically delete a temporal/ stored image. For a detailed description of the cause of the error, refer to the FFDBCom event information.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
22069 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the output of the study. \nPlease confirm the inspection list.
The output completion notification was not successfully sent to the output section.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
22103 FFMain
It failed in the acquisition of the configuration information. The initialization treatment can’t be continued. /MainProcess:Main ()
The version information was not Reinstall the system. successfully acquired. It is conceivable that the Version.env file did not exist in the specified directory or that the contents of the file were damaged.
22128 FFMain
An error occurred in logfile backup A log file backup was not successfully treatment. made. It is conceivable that the specified /MainProcess:xxxxx pathname was incorrect.
Reinstall the system. (There is no operational problem. However, communication logs cannot be saved.)
22142 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe start processing in the MainProcess is continued though it failed in the restructuring of DB.
Start the SQL server and restart the server %1=Error Code: The code that uniquely application. identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
Although an attempt to rebuild a database failed, the main process startup process is continued.
CR-IR 391CL Service Manual
Appx MT 1-139
Appx MT 1-140 Event
Event Source
Description
Causes
Remedies
Remarks
22145 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nPlease back up at once.
Backup is overdue and not done.
Use the Backup Utility to make a backup without undue delay.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
22150 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nProcessing is continued though it failed in writing the operation log.
Although the operation log was not successfully written, the process will be continued.
Check for a free space on the disk.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
22155 FFMain
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nProcessing is continued though it failed in writing event information.
Although the event information was not Restart. If the same symptom recurs, successfully written, processing continues. perform a reinstallation. The OS resource might be insufficient.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
22156 FFMain
ErrorCode:%1%nSubSystem:%2 Failed in obtaining the version information. Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: It is conceivable that the registry perform a reinstallation. %4%nIt failed in the acquisition of information was damaged. version information.%n Please reactivate server PC.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
Information (the parameter information for Nothing particular. automatic deletion/automatic determination is recorded below).
CR-IR 391CL Service Manual
Appx MT 1-140
Appx MT 1-141 Event
Event Source
Description
Causes
Remedies
24368 FFCustomMsgBox
[24368] Importing a study has Just as the message states. been completed. * When importing from other than a disk for storage, check the patient information, and set up the patient ID correctly.
24408 FFCustomMsgBox
An Image display cannot be executed during operations.
● Close the dialog and retry.
24409 FFCustomMsgBox
A display of the list cannot be executed during operations.
● Close the dialog and retry.
24410 FFCustomMsgBox
A display cannot be cleared during operations.
● Close the dialog and retry.
24615 Confirmation
[24615] The study being imported A study that was being retrieved was tried has been selected. to be opened with the Image Viewer.
Wait until the study is retrieved, and open it with the Image Viewer.
24620 Confirmation
[24620] There is a study waiting to An additional exposure was instructed from Select an option. be started. an electronic medical chart while an +Do you want to start it? exposure.
24621 FFCustomMsgBox
[24621] Patient information will be For confirmation. modified. +Are you sure?
Select an option.
24624 FFCustomMsgBox
[24624] No Patient ID has been input. *Input the patient ID.
For confirmation.
Just as the message states.
24625 FFCustomMsgBox
[24625] Patient ID can not be changed. *Use the Client Utility to change the patient ID.
For confirmation.
Just as the message states.
24626 FFCustomMsgBox
[24626] No patient’s sex has been For confirmation. selected. *Please select the sex of a patient.
Just as the message states.
24627 Confirmation
[24627] The patient information of It was attempted to change the patient information while displaying the patient the receipt computer is given priority for being searched. information of the external system. *Please edit the information of the receipt computer.
Just as the message states.
24639 Confirmation
[24639] No patient information is currently active.
No active patient is in an electronic medical chart.
24726 FFCustomMsgBox
[24726] No folder is selected.
Just as the message states.
24729 FFCustomMsgBox
[24729] A part of information has not been registered. > Check the patient information that is not registered and register again.
Occurs when failed in registering a part of the patient information.
020-221-02E 01.08.2010 FM5563
Just as the message states.
CR-IR 391CL Service Manual
Remarks
Only for veterinary hospital.
Appx MT 1-141
Appx MT 1-142 Event
Event Source
Description
Causes
Remedies
Remarks
24730 FFCustomMsgBox
[24730] The name of species is too long. > Enter correct information.
Just as the message states.
Only for veterinary hospital.
24731 FFCustomMsgBox
[24731] The name of breed is too long. > Enter correct information.
Just as the message states.
Only for veterinary hospital.
24732 FFCustomMsgBox
[24732] The name of species remains blank. > Enter the name of breed.
Just as the message states.
Only for veterinary hospital.
24733 FFCustomMsgBox
[24733] The name of breed remains blank. > Enter the name of species.
Just as the message states.
Only for veterinary hospital.
24734 FFCustomMsgBox
[24734] The name of species contains invalid character. > Enter correct information.
Just as the message states.
Only for veterinary hospital.
24735 FFCustomMsgBox
[24735] The name of breed contains invalid character. > Enter correct information.
Just as the message states.
Only for veterinary hospital.
24736 FFCustomMsgBox
[24736] Duplicated value is found. Just as the message states. > Enter a non-duplicate value.
Only for veterinary hospital.
24738 FFCustomMsgBox
[24738] The selected folder does not exist. > Select a folder and try again.
Just as the message states.
Only for veterinary hospital.
24739 FFCustomMsgBox
[24739] No file exist in the selected folder. > Check the location and the name of the file and try again.
Just as the message states.
Only for veterinary hospital.
24740 FFCustomMsgBox
[20740] Entered information will not be set. +Are you sure?
The cancel button is clicked in the Display setting window.
24741 FFCustomMsgBox
[20741] Cannot be added because It was attempted to add items over its limit. Click the OK button to return to the Display the number of selected items has setting window, and delete existing items if already reached its limit. you want to add the items.
24767 FFCustomMsgBox
[24767] Cannot be added because The number of selected menus has already Delete an selected item, and then select it. the number of selected menus reached its limit (20 items). has already reached its limit.
24768 FFCustomMsgBox
[24768] Image reading operation is being conducted +Do you want to register the study?
020-221-02E 01.08.2010 FM5563
The Take X-rays window is started on the same PC or another client PC.
If it is intended, click the OK button. If not, click the cancel button.
Click the OK button to register the study and take X-rays later.
CR-IR 391CL Service Manual
Appx MT 1-142
Appx MT 1-143 Event
Event Source
Description
Causes
Remedies
Remarks
24769 FFCustomMsgBox
[24769] Do you want to register the study?
Because “Behavior on registering a study” is set to “Register only (not start)”.
To register the study, click the OK button. Not to register the study, click the cancel button. * The setting needs to be changed to open the Take X-rays window when an exposure menu button is clicked. Select “Customize” from the utility menus, and open the Display setting window. In the “Take X-rays” window, select “Register and start the study with the specified menu” for “Behavior on registering a study”.
24770 FFCustomMsgBox
[24770] Successfully registered.
Registering the study has been successfully done.
Click the OK button.
24813 FFCustomMsgBox
[24813] Information on MWM device is being referred to first. > Edit the patient information on MWM device.
Occurs when user attempted to change the Just as the message states. patient information that was retrieved and displayed from the DICOM MWM gateway.
24831 FFCustomMsgBox
[24831]The import of database is complete.
Just as the message states.
Only for veterinary hospital.
24832 FFCustomMsgBox
[24832] The export of database is Just as the message states. complete.
Only for veterinary hospital.
29051 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nSequence error of the message between processes. \nPlease reactivate server PC.
A sequence error occurred during interprocess communication. The program might be faulty.
Restart the server application and client %1=Error Code: The code that uniquely application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
29052 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nSend error of the message between processes. \nPlease reactivate server PC.
An inter-process message transmission error occurred. The program might be faulty.
Restart the server application and client %1=Error Code: The code that uniquely application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
29053 FFRoutine
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nParameter error of the message between processes. \nPlease reactivate server PC.
A parameter analysis error (internal system Restart. If the same symptom recurs, error) occurred during inter-process perform a reinstallation. communication.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
A parameter abnormality was found Restart. If the same symptom recurs, between methods. An internal system error perform a reinstallation. occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
29107 FFMain
It failed in the preparation of the pipe. The treatment can’t be continued. /MainProcess:Main ()
An attempt to create an inter-process communication pipe failed. The system might be unstable.
Restart.
29112
FFMain
It failed in the indication of the routine mode transition. /MainProcess:m_ProcessControl_ OnRunProcComplete ()
The routine transition instruction message was not successfully issued. This error is attributable, for instance, to an inactive subprocess or a missing pipe.
Restart. If the same symptom recurs, perform a reinstallation.
29114
FFMain
An unusual message was received. This message is ignored. /MainProcess:m_ ProcessComControl_ OnRecvNotification ()
Restart. If the same symptom recurs, The received message was unusual. It is conceivable that the message was not perform a reinstallation. registered in the message information database or that the system was unstable.
29115
FFMain
An unusual send cause was received. This send cause is ignored. /MainProcess:m_Proce ssComControl_ OnRecvNotification ()
A message was received from an unknown Restart. If the same symptom recurs, source. It is conceivable that the perform a reinstallation. transmission source was not registered in the message information database or that a wrong transmission source was selected.
29116
FFMain
The form of the place of the transmission isn’t right. /MainProcess:SendMessage ()
An unknown transmission destination was specified for the received message. It is conceivable that the transmission destination was not registered in the message information database or that a wrong transmission destination was selected.
29117
FFMain
It failed in the message delivery. / MainProcess:SendMessage ()
A message delivery was not successful. Restart. If the same symptom recurs, It is conceivable that the subprocess at the perform a reinstallation. transmission destination was not running.
020-221-02E 01.08.2010 FM5563
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Appx MT 1-144
Appx MT 1-145 Event 29119
Event Source
Description
Causes
Remedies
FFMain
It failed in the process completion notice. /MainProcess:ProcessEndAnswer Message ()
A termination notification was not successfully issued to the subprocess. This error is attributable to an inactive subprocess or system instability.
29122 FFMain
It failed in the unusual occurrence notice. /MainProcess: ErrorNoticeMessage ()
An abnormality occurrence notification was Restart. not successfully issued to the subprocess. This error is attributable to an inactive subprocess or system instability.
29123 FFMain
It failed in the pipe close. /MainProcess:EndMainProcess ()
An attempt to close the inter-process communication pipe failed. The system might be unstable.
Restart.
29125 FFMain
It failed in close of the message data base. /MainProcess:xxxxx
The message database was not successfully closed. It is conceivable that the system was unstable.
Restart.
29126 FFMain
It failed in reading of the registry information. /MainProcess:xxxxx
Data was not successfully acquired from the registry. This error is attributable to improper installation.
Reinstall the system.
29127 FFMain
It failed in writing of the registry information. /MainProcess:xxxxx
Data was not successfully written into the registry. It is conceivable that the system was unstable.
Restart.
29350 ThumbnailList
ErrorCode:%1%nSubSystem:%2 A program error occurred. %nSourceFile:%3%nSpotCode:% 4%nThe asynchronous download thread of the thumbnail image cannot be The asynchronous download thread of the thumbnail image cannot be correctly ended.
30001 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the file was damaged Restart. If the same symptom recurs, characters to the character or deleted. perform a reinstallation. database.
30002 FFCustomMsgBox
Failed in connecting to the character database.
30003 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the file was damaged Restart. If the same symptom recurs, characters to the system setting or deleted. perform a reinstallation. database.
30004 FFCustomMsgBox
Failed in connecting to the system It is conceivable that the database file was setting database. damaged or deleted.
30005 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the file was damaged Restart. If the same symptom recurs, characters to the image database. or deleted. perform a reinstallation.
30013 FFCustomMsgBox
Failed in saving the display setting It is conceivable that the registry of list (worklist). information was damaged or deleted.
020-221-02E 01.08.2010 FM5563
It is conceivable that the database file was damaged or deleted.
Remarks
Restart.
The program might be faulty. Check the operations performed before and after the error occurrence, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart. If the same symptom recurs, perform a reinstallation.
Restart. If the same symptom recurs, perform a reinstallation.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Appx MT 1-145
Appx MT 1-146 Event
Event Source
Description
Causes
Remedies
30019 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the database file was characters to the network setting damaged or deleted. database.
Restart. If the same symptom recurs, perform a reinstallation.
30027 FFCustomMsgBox
Failed in list initialization (worklist). It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
30045 FFCustomMsgBox
IP address on the Image Reader cannot be obtained.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
30057 FFCustomMsgBox
Failed in receiving message.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30085 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the file was damaged Restart. If the same symptom recurs, characters to the Image Reader or deleted. perform a reinstallation. status information database.
Check the connection to the receipt computer. Retransmit then the study from the receipt computer.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The current user does not have the privilege for performing this operation.
Log in as a user with operating privileges, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Adequate sources for system operation were not available.
Restart the System.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The program might be faulty. Check the operations performed before and after the error occurrence, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
It is conceivable that the network can be unstable.
Check the connected equipment or network.
30105 FFCustomMsgBox
Failed in list initialization (waiting for study).
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30106 FFCustomMsgBox
Failed in list initialization (waiting for QA).
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30107 FFCustomMsgBox
Failed in list initialization (waiting for output).
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30108 FFCustomMsgBox
Failed in list initialization (already output).
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30109 FFCustomMsgBox
Failed in list initialization (all).
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30110
FFCustomMsgBox
Failed in list initialization (today).
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30111
FFCustomMsgBox
Failed in initializing the list (media).
30117
FFCustomMsgBox
Failed in list refreshment (worklist).
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30121 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the file was damaged Restart. If the same symptom recurs, characters to the Image Reader or deleted. perform a reinstallation. information database.
30122 FFCustomMsgBox
Failed in accessing the Image Reader information database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
30125 FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (IP size series). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
30129 FFCustomMsgBox
Failed in obtaining the system setting information (Pantomography processing).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
30147 FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (Magnetic card damaged or deleted. type).
Restart. If the same symptom recurs, perform a reinstallation.
30148 FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (Magnetic card damaged or deleted. type).
Restart. If the same symptom recurs, perform a reinstallation.
30149 FFCustomMsgBox
Failed in obtaining the system setting information (Hospital card used).
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
It is conceivable that the database file was damaged or deleted.
CR-IR 391CL Service Manual
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-147
Appx MT 1-148 Event
Event Source
Description
Causes
Remedies
30150 FFCustomMsgBox
Failed in obtaining information from database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
30151 FFCustomMsgBox
Failed in initialization processing.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30152 FFCustomMsgBox
Failed in obtaining the path information (image data folder).
It is conceivable that the file was damaged Restart. If the same symptom recurs, or deleted. perform a reinstallation.
30153 FFCustomMsgBox
Failed in terminating process.
The system was unstable.
30155 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the database file was characters to the database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
30157 FFCustomMsgBox
Failed in accessing to database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
30200 FFCustomMsgBox
Failed in RIS activation.
There may be a problem with the RIS module or RIS setup.
Check the settings and then restart. If the same symptom recurs, perform a reinstallation.
30201 FFCustomMsgBox
A communication error with RIS occurred.
There may be a problem with the RIS module or RIS setup.
Check the settings and then restart. If the same symptom recurs, perform a reinstallation.
30202 FFCustomMsgBox
A communication error with RIS occurred.
There may be a problem with the RIS module or RIS setup.
Check the settings and then restart. If the same symptom recurs, perform a reinstallation.
30203 FFCustomMsgBox
Failed in study terminating process.
30204 FFCustomMsgBox
The system cannot be started due Failed in installation. to improperly performed installation.
Reinstall the system.
30205 FFCustomMsgBox
Failed in search processing.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30206 FFCustomMsgBox
Failed in initializing patient additional information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
30207 FFCustomMsgBox
An error of unknown cause occurred with connection to the P.Console.
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
30300 FFCustomMsgBox
An error of unknown cause occurred.
020-221-02E 01.08.2010 FM5563
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-148
Appx MT 1-149 Event
Event Source
Description
Causes
30301 FFCustomMsgBox
Failed in obtaining information from the system setting database.
30301 FFInput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nSystem setting value acquisition error. \nThe default value is used.
30302 FFCustomMsgBox
A failure occurred in an attempt to acquire values from the connection device setup database.
30302 FFInput
It failed in the acquisition of a value from a connection device setting database.
30303 FFCustomMsgBox
Failed in initialization processing.
30303 FFInput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nInitialization was discontinued: An internal control system error had occurred.
30304 FFCustomMsgBox
Acquisition of path information failed.
30304 FFInput
ErrorCode:%1%nSubSystem:%2 A Directory.ini file access error occurred. %nSourceFile: %3%nSpotCode: The file might be damaged. %4%nIt failed in the acquisition of file path information.
30305 FFCustomMsgBox
Failed in terminating process.
020-221-02E 01.08.2010 FM5563
Remedies
Remarks
The value was not successfully acquired Restart. If the same symptom recurs, from the system setup database while an perform a reinstallation. initialization process was being performed. The database might be damaged.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Value acquisition from the connected equipment setup database failed. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
A system setup value could not be acquired. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-149
Appx MT 1-150 Event
Event Source
Description
Causes
30305 FFInput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe termination failed: Because of internal control or execute release of area.
The termination process failed due, for instance, to an internal control termination process failure or an area deallocation failure.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
30306 FFCustomMsgBox
An attempt to create an image information file resulted in a failure.
30306 FFInput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nImage information file (DDO) detected damage while executing the image input process.
A damaged image information file (DDO) was found while the image input process was being performed.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
30307 FFCustomMsgBox
An attempt to register image information onto the database resulted in a failure.
30307 FFInput
ErrorCode:%1%nSubSystem:%2 Image information was not successfully Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: registered in the database while the image perform a reinstallation. %4%nIt failed in the registration of input process was being performed. the image information to the database while the image-input processing
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
30308 FFCustomMsgBox
Image acquisition failed.
This event will not be displayed.
30309 FFCustomMsgBox
Termination processing failed.
● Retry after checking the Image Reader status. Termination cannot be executed when a cassette is being inserted into the Image Reader.
30310 FFInput
Patient information transmission failure
020-221-02E 01.08.2010 FM5563
A certain error occurred on the Hobbit side during the interval between the creation and transmission of the patient information to be transmitted to the RU.
Remedies
Remarks
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-150
Appx MT 1-151 Event 30311
Event Source FFInput
Description
Causes
Remarks
Patient information display failure. After patient information was transmitted to Restart the image reader. If the same error the RU, an error occurred on the RU side recurs, perform a reinstallation. If the for some reason. reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
[30501] Failed in gaining access Just as the message states. to the server computer. Timeout occurred while processing. > Check the connections to the network and hub. > Press the button below to close the dialog, and then restart the same study from “Refer” tab page.
30502 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while initializing it. Please reboot Server-computer.
30502 FFCustomMsgBox
An unknown error occurred during initialization processing.
30503 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the acquisition of the reservation inspection.
30503 FFCustomMsgBox
An attempt to acquire reserved studies resulted in a failure.
020-221-02E 01.08.2010 FM5563
Remedies
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
An unknown error occurred during an initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. The reserved study was not successfully acquired. This failure is attributable to an inactive database or an internal system error.
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-151
Appx MT 1-152 Event
Event Source
Description
Causes
Remedies
30504 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the deletion of the reservation inspection.
30504 FFCustomMsgBox
An attempt to delete reserved studies resulted in a failure.
Restart the server computer.
30505 FCRWeb
ErrorCode:%1%nSubSystem:%2 Study acquisition failed. This failure is %nSourceFile: %3%nSpotCode: attributable to an inactive database or an %4%nIt failed in the acquisition of internal system error. inspection information.
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
30505 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30506 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the retrieval of patient information. Can not get patient-info from database.
30506 FFCustomMsgBox
Failed in searching the patient information.
30507 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition from the Ekarte
30507 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure.
020-221-02E 01.08.2010 FM5563
The reserved study was not successfully deleted. This failure is attributable to an inactive database or an internal system error.
The patient information search process failed. This failure is attributable to an inactive database or an internal system error.
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. The information could not be acquired from an electronic medical chart. This error is attributable to an incorrect setting in the Service Utility or an unconnected network.
With the Service Utility, check the electronic medical chart settings. If the settings are correct, check the network cable, hub, and other network devices.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-152
Appx MT 1-153 Event
Event Source
Description
Causes
30508 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the acquisition of device information.
The output destination equipment information was not successfully acquired. This failure is attributable to an inactive database or an internal system error.
30508 FFCustomMsgBox
A failure occurred in an attempt to acquire information of devices targeted for image output.
30509 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while processing the attestation.
30509 FFCustomMsgBox
An unknown error occurred during authentication processing.
Restart the server computer.
30510 FCRWeb
ErrorCode:%1%nSubSystem:%2 Study registration failed. This failure is %nSourceFile: %3%nSpotCode: attributable to an inactive database or an %4%nIt failed in the registration of internal system error. the inspection.
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
30510 FFCustomMsgBox
Study registration resulted in a failure.
Restart the server computer.
30511
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the communication with the server.
30511
FFCustomMsgBox
Communication with the server computer resulted in a failure
020-221-02E 01.08.2010 FM5563
Remedies Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An exception occurred during an authentication process. This is an internal system error.
The communication with the server was not successfully established. It is conceivable that the server PC is not running or does not exist in the network.
Restart. If the same symptom recurs, perform a reinstallation.
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-153
Appx MT 1-154 Event
Event Source
Description
30512 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in beginning of the inspection.
30512 FFCustomMsgBox
Study start processing failed.
30513 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the end of the inspection.
30513 FFCustomMsgBox
Study termination processing failed.
30514 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of the image.
30514 FFCustomMsgBox
Image update processing failed.
30515 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in information in the image acquisition.
30515 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
020-221-02E 01.08.2010 FM5563
Causes
Remedies
The study start process was not Restart. If the same symptom recurs, successfully performed. An internal system perform a reinstallation. error occurred.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. The study termination process was not Restart. If the same symptom recurs, successfully performed. An internal system perform a reinstallation. error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. The image update process was not Restart. If the same symptom recurs, successfully performed. This error is perform a reinstallation. attributable to a damaged database, a broken DDO, or a disconnected server PC.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. Image information was not successfully acquired. This error is attributable to a damaged database, a broken DDO, or a disconnected server PC.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-154
Appx MT 1-155 Event
Event Source
Description
30516 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred in the exclusive operation.
30516 FFCustomMsgBox
An unknown error occurred during exclusive processing.
30517 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of the menu addition.
30517 FFCustomMsgBox
Update of added menus resulted in a failure.
30518 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of the menu change.
30518 FFCustomMsgBox
Update of added menus resulted in a failure.
30519 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of the menu deletion.
30519 FFCustomMsgBox
A failure occurred in an attempt to update menu deletion/image inactivation.
020-221-02E 01.08.2010 FM5563
Causes An unknown error occurred during an exclusive process.
Remedies Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An update process for menu addition was not successfully performed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An update process for menu addition was not successfully performed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An update process for menu deletion/ image invalidation was not successfully performed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-155
Appx MT 1-156 Event
Event Source
Description
30520 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of the menu array substitution.
30520 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
30521 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of the image replacement.
30521 FFCustomMsgBox
A failure occurred in an attempt to update replaced images.
30522 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of the setting in the output destination.
30522 FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
30523 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of patient ID.
30523 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
020-221-02E 01.08.2010 FM5563
Causes The update process for a display order change was not successfully performed. An internal system error occurred.
Remedies Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. The update process for image replacement Restart. If the same symptom recurs, was not successfully performed. An internal perform a reinstallation. system error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. The output destination setting was not successfully updated. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. The patient ID update process was not Restart. If the same symptom recurs, successfully performed. An internal system perform a reinstallation. error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-156
Appx MT 1-157 Event
Event Source
Description
Causes
Remedies
30524 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the update processing of patient information.
30524 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
30525 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition. Can not get information from NetConfib.mdb.
30525 FFCustomMsgBox
Acquisition of equipment information failed.
30526 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition. Can not get information from MenuDataBase.
30526 FFCustomMsgBox
Acquisition of menu information failed.
Restart the server computer.
30527 FFCustomMsgBox
An attempt to acquire study output status resulted in a failure.
Restart the server computer.
30528 FFCustomMsgBox
An attempt to acquire equipment output status resulted in a failure.
Restart the server computer.
30529 FFCustomMsgBox
A failure occurred in an attempt to update menu deletion/image inactivation.
Restart the server computer.
30530 FFCustomMsgBox
A failure occurred in an attempt to update menu deletion/image inactivation.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
The update process for detailed patient information was not successfully performed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. The NetConfig value was not successfully acquired. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. Menu information was not successfully acquired. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-157
Appx MT 1-158 Event
Event Source
Description
Causes
Remedies
30531 FFCustomMsgBox
A failure occurred in an attempt to update menu deletion/image inactivation.
Restart the server computer.
30532 FFCustomMsgBox
A failure occurred in an attempt to update menu deletion/image inactivation.
Restart the server computer.
30533 FFCustomMsgBox
A failure occurred in an attempt to update menu deletion/image inactivation.
Restart the server computer.
30534 FFCustomMsgBox
An unknown error occurred during initialization processing.
Restart the server computer.
30535 FFCustomMsgBox
An unknown error occurred during initialization processing.
Restart the server computer.
30536 FFCustomMsgBox
An unknown error occurred during initialization processing.
Restart the server computer.
30537 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30538 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30539 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30540 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30541 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30542 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30543 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30544 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30545 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-158
Appx MT 1-159 Event
Event Source
Description
Causes
Remedies
30546 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30547 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30548 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
Restart the server computer.
30549 FFCustomMsgBox
A failure occurred in an attempt to update patient’s detailed information.
An unknown error occurred during initialization processing.
30552 FFCrExamCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while DB Component was executing it.
30552 FFCustomMsgBox
An unknown error occurred during initialization processing.
020-221-02E 01.08.2010 FM5563
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An illegal parameter was specified.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred while a database component was being executed.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-159
Appx MT 1-160 Event
Event Source
Description
Causes
Remedies
30553 FFCrExamCom
ErrorCode:%1%nSubSystem: %2%nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while StatusManagement Component was executing it.
30553 FFCustomMsgBox
An unknown error occurred during initialization processing.
30554 FFCrExamCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while CRExam Component was executing it.
30554 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
30555 FFCrExamCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while ImageGeneration Component was executing it.
30555 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30556 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30557 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30558 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30559 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30560 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30561 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
An unknown error occurred while the study Restart. If the same symptom recurs, status change component was being perform a reinstallation. executed.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an Restart. If the same symptom recurs, attempt was made to execute a component perform a reinstallation. of a CR study.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred while the processed image generation component was being executed.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-160
Appx MT 1-161 Event
Event Source
Description
Causes
Remedies
30562 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30563 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30564 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30565 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30566 FFCustomMsgBox
A failure occurred in an attempt to update patient ID.
Restart the server computer.
30567 FFCustomMsgBox
An unknown error occurred during initialization processing.
Restart the server computer.
30568 FFCustomMsgBox
An unknown error occurred during initialization processing.
Restart the server computer.
30569 FFCustomMsgBox
An unknown error occurred during initialization processing.
Restart the server computer.
30570 FFCustomMsgBox
An unknown error occurred during initialization processing.
Restart the server computer.
30571 FFCustomMsgBox
An unknown error occurred during initialization processing.
Restart the server computer.
30572 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30573 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure.
Restart the server computer.
30574 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure.
Restart the server computer.
30575 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure.
Restart the server computer.
30576 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure.
Restart the server computer.
30577 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure.
Restart the server computer.
30578 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure.
Restart the server computer.
30579 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure.
Restart the server computer.
30580 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30581 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-161
Appx MT 1-162 Event
Event Source
Description
Causes
Remedies
30582 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30583 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30584 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30585 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30586 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30587 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30588 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30589 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30590 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30591 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30592 FFCustomMsgBox
An unknown error occurred during exclusive processing.
Restart the server computer.
30593 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30594 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30595 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30596 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30597 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30598 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30599 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30600 FFCustomMsgBox
An unknown error occurred during initialization process.
A failure occurred in an attempt to update settings for target destination of image output.
30602 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while InitialProc was executing it.
30603 FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
30603 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while acquiring Menu information.
30604 FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
020-221-02E 01.08.2010 FM5563
Causes An unknown error occurred during initialization process.
Remedies Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An illegal parameter was specified.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred during an initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to acquire menu information. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
A failure occurred in an attempt to update settings for target destination of image output.
30605 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while information at the output destination.
30606 FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
30606 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while setting Menu Information.
30607 FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
30607 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while setting registered Study information.
30608 FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
020-221-02E 01.08.2010 FM5563
Causes An unknown error occurred during patient information setup. The database might be damaged.
Remedies Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to set the output destination information. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to acquire menu information. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to set up registered study information. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-164
Appx MT 1-165 Event
Event Source
Description
30608 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred by the generation of the Study sequence number.
30609 FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
30609 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred by the generation of the Image sequence number.
30610 FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
30610 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by setting the value to DDO.
30611
FFCustomMsgBox
A failure occurred in an attempt to update settings for target destination of image output.
30611
FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while Study Information was registering.
30612 FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
An unknown error occurred during initialization process.
Causes An unknown error occurred when an attempt was made to issue an image sequence number.
Remedies Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to issue an image sequence number.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An error occurred when an attempt was made to set a DDO value. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to register study information in a database.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-165
Appx MT 1-166 Event
Event Source
Description
Causes
Remedies
30612 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while Image Information was registering.
30613 FFCustomMsgBox
A failure occurred in an attempt to acquire information of target destination for image output.
Restart the server computer.
30614 FFCustomMsgBox
A failure occurred in an attempt to acquire information of target destination for image output.
Restart the server computer.
30615 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30616 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30617 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30618 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30619 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30620 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30621 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30622 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30623 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30624 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30625 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30626 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30627 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30628 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
An unknown error occurred when an attempt was made to register image information in a database.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-166
Appx MT 1-167 Event
Event Source
Description
Causes
Remedies
30629 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30630 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30631 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30632 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30633 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30634 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30635 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30636 FFCustomMsgBox
Update of added menus resulted in a failure.
Restart the server computer.
30637 FFCustomMsgBox
An unknown error occurred during initialization process.
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAn illegal parameter was specified.
30652 FFCustomMsgBox
Study registration resulted in a failure.
30652 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred in initialization.
30653 FFCustomMsgBox
Study registration resulted in a failure.
30653 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while acquiring Study information from DB.
020-221-02E 01.08.2010 FM5563
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An illegal parameter was specified.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred during an initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to acquire study information from a database.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-168
Appx MT 1-169 Event
Event Source
Description
30654 FFCustomMsgBox
Study registration resulted in a failure.
30654 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by loading the DDO file.
30655 FFCustomMsgBox
Study registration resulted in a failure.
30655 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by setting the value to DDO.
30656 FFCustomMsgBox
An attempt to delete reserved studies resulted in a failure.
30656 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while executing processing of Re-Imageing.
30657 FFCustomMsgBox
An attempt to delete reserved studies resulted in a failure.
30657 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while registering the Image information to DB.
30658 FFCustomMsgBox
An attempt to delete reserved studies resulted in a failure.
020-221-02E 01.08.2010 FM5563
Causes
Remedies
Remarks
Restart the server computer. An error occurred when an attempt was made to load a DDO file. The error is attributable to a damaged DDO file or OS resource insufficiency.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An error occurred when an attempt was made to set a DDO value. The error is attributable to OS resource insufficiency.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred during a re-exposure process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to register image information in a database.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-169
Appx MT 1-170 Event
Event Source
Description
Causes
Remedies
30658 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 An unknown error occurred when an %nSourceFile: %3%nSpotCode: attempt was made to delete image %4%nThe unknown error information from a database. occurred while deleting the Image information to DB.
Restart. If the same symptom recurs, perform a reinstallation.
30659 FFCustomMsgBox
An attempt to delete reserved studies resulted in a failure.
Restart the server computer.
30660 FFCustomMsgBox
An attempt to delete reserved studies resulted in a failure.
Restart the server computer.
30661 FFCustomMsgBox
An attempt to delete reserved studies resulted in a failure.
Restart the server computer.
30662 FFCustomMsgBox
An attempt to delete reserved studies resulted in a failure.
Restart the server computer.
30663 FFCustomMsgBox
An attempt to acquire reserved studies resulted in a failure.
Restart the server computer.
30664 FFCustomMsgBox
An attempt to acquire reserved studies resulted in a failure.
Restart the server computer.
30665 FFCustomMsgBox
An attempt to acquire reserved studies resulted in a failure.
Restart the server computer.
30666 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30667 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30668 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30669 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30670 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30671 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30672 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30673 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30674 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-170
Appx MT 1-171 Event
Event Source
Description
Causes
Remedies
30675 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30676 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30677 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30678 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30679 FFCustomMsgBox
Failed in searching the patient information.
Restart the server computer.
30680 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30681 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30682 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30683 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30684 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30685 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30686 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30687 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30688 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30689 FFCustomMsgBox
A failure occurred in an attempt to store order of displaying equipment users in a list.
Restart the server computer.
30690 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-171
Appx MT 1-172 Event
Event Source
Description
Causes
Remedies
30691 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30692 FFCustomMsgBox
Communication with the server computer resulted in a failure
Restart the server computer.
30693 FFCustomMsgBox
Communication with the server computer resulted in a failure
Restart the server computer.
30694 FFCustomMsgBox
Communication with the server computer resulted in a failure
Restart the server computer.
30695 FFCustomMsgBox
Communication with the server computer resulted in a failure
Restart the server computer.
30696 FFCustomMsgBox
Communication with the server computer resulted in a failure
Restart the server computer.
30697 FFCustomMsgBox
Communication with the server computer resulted in a failure
Restart the server computer.
30698 FFCustomMsgBox
Communication with the server computer resulted in a failure
Restart the server computer.
30699 FFCustomMsgBox
Communication with the server computer resulted in a failure
30701 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAn illegal parameter was specified.
30702 FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
An unknown error occurred during initialization process.
Study start processing failed.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An illegal parameter was specified.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An unknown error occurred when an attempt was made to acquire study information from a database.
Study start processing failed.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An error occurred when an attempt was made to load a DDO file. An internal system error occurred.
Study start processing failed.
30705 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by setting the value to DDO.
Remedies
Restart the server computer.
Study start processing failed.
30704 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by loading the DDO file.
30705 FFCustomMsgBox
An unknown error occurred during an initialization process.
Study start processing failed.
30703 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while acquiring Study information from the data base.
30704 FFCustomMsgBox
Causes
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An error occurred when an attempt was made to set a DDO value. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-173
Appx MT 1-174 Event
Event Source
Description
30706 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred about the untaking a picture while processing the change to the taking a picture menu. 30707 FFCustomMsgBox
30710 FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
An unknown error occurred when the process for switching to the exposure menu for exposed images was being performed.
Study termination processing failed.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to register image information in the database.
Study termination processing failed.
30709 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while acquiring Menu information.
Remedies
Restart the server computer.
Study termination processing failed.
30708 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown occurred while registering the Image information to the data base.
30709 FFCustomMsgBox
An unknown error occurred when a switch was being made to an unexposed exposure menu.
Study termination processing failed.
30707 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while processing the change to the picture menu that had been taken a picture.
30708 FFCustomMsgBox
Causes
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to acquire menu information.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-174
Appx MT 1-175 Event
Event Source
Description
30710 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while generating the picture file.
30711
Causes An unknown error occurred during image file generation.
Remedies Restart. If the same symptom recurs, perform a reinstallation.
FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30712 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30713 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30714 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30715 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30716 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30717 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30718 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30719 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30720 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30721 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30722 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30723 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30724 FFCustomMsgBox
Study termination processing failed.
Restart the server computer.
30725 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30726 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30727 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-175
Appx MT 1-176 Event
Event Source
Description
Causes
Remedies
30728 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30729 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30730 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30731 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30732 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30733 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30734 FFCustomMsgBox
Image update processing failed.
Restart the server computer.
30735 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30736 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30737 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30738 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30739 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30740 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30741 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30742 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30743 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30744 FFCustomMsgBox
An attempt to acquire image information resulted in a failure.
Restart the server computer.
30745 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30746 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30747 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30748 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30749 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30750 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
An attempt to acquire studies resulted in a failure.
30751 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAn illegal parameter was specified.
30752 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
30752 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred in initialization.
An unknown error occurred during an initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
30753 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while acquiring Study information from the data base.
An unknown error occurred when an attempt was made to acquire study information from a database.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
30753 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
020-221-02E 01.08.2010 FM5563
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An illegal parameter was specified.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-177
Appx MT 1-178 Event
Event Source
Description
30754 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by loading the DDO file.
30754 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
30755 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred by setting the value to DDO.
30755 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
30756 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while acquiring the replacement information data.
30756 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
30757 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown occurred while registering the Image information to the data base.
30757 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
020-221-02E 01.08.2010 FM5563
Causes An error occurred when an attempt was made to load a DDO file. An internal system error occurred.
Remedies Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An error occurred when an attempt was made to set a DDO value. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An error occurred when an attempt was made to acquire replacement information data. This is an internal system error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred when an attempt was made to register image information in the database.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-178
Appx MT 1-179 Event
Event Source
Description
Causes
Remedies
30758 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while acquiring Menu information.
30758 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
30759 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred while generating the picture file.
30759 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30760 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30761 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30762 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30763 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30764 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30765 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30766 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30767 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30768 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30769 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30770 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
An unknown error occurred when an attempt was made to acquire menu information.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer. An unknown error occurred during image file generation.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-179
Appx MT 1-180 Event
Event Source
Description
Causes
Remedies
30771 FFCustomMsgBox
An attempt to acquire studies resulted in a failure.
Restart the server computer.
30772 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30773 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30774 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30775 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30776 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30777 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30778 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30779 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30780 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30781 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30782 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30783 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30784 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30785 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30786 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30787 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30788 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30789 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30790 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-180
Appx MT 1-181 Event
Event Source
Description
Causes
Remedies
30791 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30792 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30793 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30794 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30795 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30796 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30797 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30798 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30799 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30800 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30801 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30802 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30803 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30804 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30805 FFCustomMsgBox
An unknown error occurred during initialization process.
Restart the server computer.
30806 FFCustomMsgBox
[30806] Failed in obtaining patient Occurs when failed in retrieving the patient Check the operation of the DICOM MWM information from the DICOM MWM gateway and the settings. information. gateway. > Restart the system and try again. + If restarting does not resolve, contact your service engineer.
30850 FFCustomMsgBox
An unknown error has occurred.
30851 FFCustomMsgBox
An unknown error has occurred.
020-221-02E 01.08.2010 FM5563
The system was unstable.
Remarks
Restart. If the same symptom recurs, perform a reinstallation. ● Press [Cancel] and finish trimming function. + To continue other processing, press the button below.
CR-IR 391CL Service Manual
Appx MT 1-181
Appx MT 1-182 Event
Event Source
Description
Causes
Remedies
30907 FFCustomMsgBox
The server device could not be accessed.
31001 FFCustomMsgBox
Failed in obtaining the registry information (font name).
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31002 FFCustomMsgBox
Failed in obtaining the registry information (font size).
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31003 FFCustomMsgBox
Failed in obtaining the registry information (multi-byte language information).
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31004 FFCustomMsgBox
Failed in obtaining the used language in system setting.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31005 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the database file was characters to the character damaged or deleted. database.
Restart. If the same symptom recurs, perform a reinstallation.
31006 FFCustomMsgBox
Failed in connecting to the character database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31007 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the database file was characters to the system setting damaged or deleted. database.
Restart. If the same symptom recurs, perform a reinstallation.
31008 FFCustomMsgBox
Failed in connecting to the system It is conceivable that the database file was setting database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31010 FFCustomMsgBox
Failed in connecting to the image database.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
31011
Failed in information acquisition from the image database.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
Initialization of the image database failed.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
FFCustomMsgBox
31012 FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
Remarks
Close the displayed message and try login again.
CR-IR 391CL Service Manual
Appx MT 1-182
Appx MT 1-183 Event
Event Source
Description
Causes
Remedies
31013 FFCustomMsgBox
Failed in information acquisition from the image database.
31014 FFCustomMsgBox
Failed in setting information to the The problem is attributable, for instance, to Check whether the SQL service manager image database. an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
31015 FFCustomMsgBox
Failed in deleting information from The problem is attributable, for instance, to Check whether the SQL service manager the image database. an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
31016 FFCustomMsgBox
Failed in connecting to the flag database.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
31017 FFCustomMsgBox
Failed in accessing the flag database.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
31018 FFCustomMsgBox
Failed in setting information to the The problem is attributable, for instance, to Check whether the SQL service manager flag database. an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
31019 FFCustomMsgBox
Failed in initialization process for menu setting database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31020 FFCustomMsgBox
Failed in obtaining the menu It is conceivable that the database file was information from the menu setting damaged or deleted. database.
Restart. If the same symptom recurs, perform a reinstallation.
31021 FFCustomMsgBox
Failed in obtaining the menu parameter information from the menu setting database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31022 FFCustomMsgBox
Failed in terminating the menu setting database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
Remarks
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
CR-IR 391CL Service Manual
Appx MT 1-183
Appx MT 1-184 Event
Event Source
Description
Causes
Remedies
31023 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the database file was characters to the network setting damaged or deleted. database.
Restart. If the same symptom recurs, perform a reinstallation.
31024 FFCustomMsgBox
Failed in connecting to the network setting database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31025 FFCustomMsgBox
Failed in obtaining information from the network setting database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31026 FFCustomMsgBox
Failed in issuing the image information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31027 FFCustomMsgBox
Failed in obtaining the image information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31028 FFCustomMsgBox
Failed in setting the image information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31029 FFCustomMsgBox
Failed in deleting the image information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31030 FFCustomMsgBox
Failed in reading the image information file.
An image-related file was not successfully accessed. The problem is attributable to a disk.
Restart. If the same symptom frequently occurs, replace the disk.
31031 FFCustomMsgBox
Failed in writing the image information file.
An image-related file was not successfully accessed. The problem is attributable to a disk.
Restart. If the same symptom frequently occurs, replace the disk.
31032 FFCustomMsgBox
Failed in releasing the image information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31033 FFCustomMsgBox
Failed in obtaining the caption information (Patient ID).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31034 FFCustomMsgBox
Failed in obtaining the caption information (Accession No.).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31035 FFCustomMsgBox
Failed in obtaining the caption information (Accession No.).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31036 FFCustomMsgBox
Failed in obtaining the caption It is conceivable that the database file was information (Kanji-patient’s name). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31037 FFCustomMsgBox
Failed in obtaining the caption information (sex).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31038 FFCustomMsgBox
Failed in obtaining the caption information (sex: M).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31039 FFCustomMsgBox
Failed in obtaining the caption information (sex: F).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31040 FFCustomMsgBox
Failed in obtaining the caption information (sex: O).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-184
Appx MT 1-185 Event
Event Source
Description
Causes
Remedies
31041 FFCustomMsgBox
Failed in obtaining the caption information (date of birth).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31042 FFCustomMsgBox
Failed in obtaining the system setting information (Patient ID input character limitation).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31043 FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (Accession No. damaged or deleted. input character limitation).
Restart. If the same symptom recurs, perform a reinstallation.
31044 FFCustomMsgBox
Failed in obtaining the system setting information (Patient ID pudding format).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31045 FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (Accession No. damaged or deleted. pudding format).
Restart. If the same symptom recurs, perform a reinstallation.
31047 FFCustomMsgBox
Failed in obtaining the system setting information (date of birth format).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31051 FFCustomMsgBox
Patient ID includes invalid characters.
A 2-byte character, @, or other unacceptable character was contained.
Re-input correctly.
31052 FFCustomMsgBox
Accession No. includes invalid characters.
A 2-byte character, @, or other unacceptable character was contained.
Re-input correctly.
31053 FFCustomMsgBox
Patient Name includes invalid characters.
A 2-byte character, @, or other unacceptable character was contained.
Re-input correctly.
31054 FFCustomMsgBox
Kanji-patient name includes invalid characters.
A 1-byte character or other unacceptable character was contained.
Re-input correctly.
31055 FFCustomMsgBox
Sex includes invalid characters.
A character other than “M”, “F”, and “O” was contained.
Re-input correctly.
31056 FFCustomMsgBox
The input format for date of birth is invalid.
The entry did not agree with a preselected birth date format.
Re-input correctly.
31057 FFCustomMsgBox
Failed in accessing the requesting It is conceivable that the database file was department database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31058 FFCustomMsgBox
Failed in obtaining the caption information (requesting dep.).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31059 FFCustomMsgBox
Failed in obtaining the item information for displaying in the requesting dep. Selection list.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31060 FFCustomMsgBox
Failed in obtaining the requesting department information.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31061 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the file was damaged Restart. If the same symptom recurs, characters to the requesting or deleted. perform a reinstallation. department database.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-185
Appx MT 1-186 Event
Event Source
Description
Causes
Remedies
31062 FFCustomMsgBox
Failed in accessing the It is conceivable that the database file was technologist information database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31063 FFCustomMsgBox
Failed in obtaining the caption information (technologist).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31064 FFCustomMsgBox
Failed in obtaining the item information for displaying in the technologist selection list.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31065 FFCustomMsgBox
Failed in obtaining the technologist It is conceivable that the database file was information. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31066 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the database file was characters to the technologist damaged or deleted. database.
Restart. If the same symptom recurs, perform a reinstallation.
31067 FFCustomMsgBox
Failed in obtaining the registry information (window size).
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31068 FFCustomMsgBox
No patient information is input.
Nothing was entered in the patient information input field.
Enter at least the patient’s sex.
31069 FFCustomMsgBox
Failed in obtaining the system setting information (succeeded from exposure menu reservation list).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31070 FFCustomMsgBox
Multiple studies cannot be executed.
An attempt was made to start an examination process with more than one examination item selected from an examination waiting list.
Start an examination process with one examination item selected.
31071 FFCustomMsgBox
No list is selected.
An attempt was made to start execution with no examination item selected.
Select an item prior to execution.
31072 FFCustomMsgBox
Film annotation includes invalid characters.
An unacceptable character was contained. Re-input correctly.
31074 FFCustomMsgBox
Failed in obtaining information from the flag database.
The problem is attributable, for instance, to Check whether the SQL service manager an inactive SQL service manager or is normally operating. If the symptom uninitialized image database. occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
31076 FFCustomMsgBox
Failed in obtaining the button image (Clear button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31077 FFCustomMsgBox
Failed in obtaining the button image (OK button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31078 FFCustomMsgBox
Failed in obtaining the button image (Cancel button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31079 FFCustomMsgBox
Failed in obtaining the button image (increment button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-186
Appx MT 1-187 Event
Event Source
Description
Causes
Remedies
31080 FFCustomMsgBox
Failed in obtaining the button image (decrement button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31081 FFCustomMsgBox
Failed in obtaining the button image (Next page button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31082 FFCustomMsgBox
Failed in obtaining the button image (previous page button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31090 FFCustomMsgBox
Failed in obtaining the caption information (woklist tab).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31091 FFCustomMsgBox
Failed in obtaining caption information (media tab).
31092 FFCustomMsgBox
Failed in updating the list (media).
31093 FFCustomMsgBox
Failed in saving settings for the list (media) display.
31094 FFCustomMsgBox
No study UID can be obtained from the list (media).
31097 FFCustomMsgBox
Failed in obtaining the information It is conceivable that the database file was damaged or deleted. from the character string database.
Restart. If the same symptom recurs, perform a reinstallation.
31099 FFCustomMsgBox
An error of unknown cause occurred.
It is highly probable that the program was faulty.
31100
FFCustomMsgBox
Failed in display processing by the image input subsystem.
It is conceivable that the image data or image information file was damaged.
31101
FFCustomMsgBox
Failed in obtaining the path information (log saving folder).
It is conceivable that the file was damaged Restart. If the same symptom recurs, or deleted. perform a reinstallation.
31103
FFCustomMsgBox
Failed in setting patient information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31105
FFCustomMsgBox
Failed in terminating the image input subsystem.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31106
FFCustomMsgBox
Failed in terminating the image input subsystem.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31107
FFCustomMsgBox
Failed in image inputting process in the image input sub-system.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31108
FFCustomMsgBox
Failed in image inputting process in the image input sub-system.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31109
FFCustomMsgBox
Failed in image inputting process in the image input sub-system.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31110
FFCustomMsgBox
Failed in calling up the exposure menu.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31111
FFCustomMsgBox
Failed in study terminating process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Appx MT 1-187
Appx MT 1-188 Event
Event Source
Description
Causes
Remedies
31112
FFCustomMsgBox
Failed in image inputting process. The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31113
FFCustomMsgBox
Failed in image inputting process. The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31114
FFCustomMsgBox
Failed in specifying the urgent processing.
Restart. If the same symptom recurs, perform a reinstallation.
31116
FFCustomMsgBox
Communication line for monitoring It is highly probable that the RU or line was Check the RU and line. the connection status with the faulty. Image Reader (%s) has broken.
31117
FFCustomMsgBox
No connection monitoring response from the Image Reader (%s).
It is highly probable that the RU or line was Check the RU and line. faulty.
31118
FFCustomMsgBox
Control line with the Image Reader (%s) has broken.
It is highly probable that the RU or line was Check the RU and line. faulty.
31119
FFCustomMsgBox
No command response from the Image Reader (%s).
It is highly probable that the RU or line was Check the RU and line. faulty.
31120
FFCustomMsgBox
Failed in Image Reader status control.
It is highly probable that the RU or line was Check the RU and line. faulty.
31121
FFCustomMsgBox
Command requested to the Image It is highly probable that the RU or line was Check the RU and line. Reader has not been executed. faulty.
31122
FFCustomMsgBox
Failed in obtaining the information It is highly probable that the RU or line was Check the RU and line. (status) from the Image Reader. faulty.
31123
FFCustomMsgBox
Failed in obtaining the information It is highly probable that the RU or line was Check the RU and line. faulty. (machine code) from the Image Reader.
31124
FFCustomMsgBox
Failed in obtaining the information It is highly probable that the RU or line was Check the RU and line. (FRUP version) from the Image faulty. Reader.
31125
FFCustomMsgBox
Failed in re-connecting with the Image Reader.
31126
FFCustomMsgBox
Failed in breaking connection with It is highly probable that the RU or line was Check the RU and line. the Image Reader. faulty.
31127
FFCustomMsgBox
Failed in obtaining the caption information (Study with QA completed).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31128
FFCustomMsgBox
Failed in obtaining the caption (only exposure completed).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31129
FFCustomMsgBox
Failed in obtaining the caption information (Study interrupt button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
The system was unstable.
Remarks
It is highly probable that the RU or line was Check the RU and line. faulty.
CR-IR 391CL Service Manual
Appx MT 1-188
Appx MT 1-189 Event
Event Source
Description
Causes
Remedies
31130
FFCustomMsgBox
Failed in obtaining the caption information (Cancel button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31131
FFCustomMsgBox
Failed in obtaining the caption information (Study reception tab).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31132
FFCustomMsgBox
Failed in obtaining the caption It is conceivable that the database file was information (waiting for study tab). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31133
FFCustomMsgBox
Failed in obtaining the caption information (waiting for QA tab).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31134
FFCustomMsgBox
Failed in obtaining the caption information (Waiting for output tab).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31135
FFCustomMsgBox
Failed in obtaining the caption information (Already output tab).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31136
FFCustomMsgBox
Failed in obtaining the caption information (All tabs).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31137
FFCustomMsgBox
Failed in obtaining the caption information (Today tab).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31138
FFCustomMsgBox
Failed in obtaining the button image (System button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31139
FFCustomMsgBox
Failed in obtaining the caption information (Study reservation button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31140
FFCustomMsgBox
Failed in obtaining the caption information (Study list setting button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31141
FFCustomMsgBox
Patient information entered is illegal.
An unacceptable character was contained. Re-input correctly.
31142
FFCustomMsgBox
Failed in obtaining the display group data.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31143
FFCustomMsgBox
Failed in obtaining the display group data.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31144
FFCustomMsgBox
Failed in obtaining the display group data.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31145
FFCustomMsgBox
Failed in obtaining the display group data.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31146
FFCustomMsgBox
Failed in obtaining the display group data.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31147
FFCustomMsgBox
Failed in obtaining the display group data.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31148
FFCustomMsgBox
Failed in obtaining the display group data.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-189
Appx MT 1-190 Event
Event Source
Description
Causes
Remedies
31149
FFCustomMsgBox
Failed in obtaining the display group data.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31152
FFCustomMsgBox
Failed in obtaining the exposure menu information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31153
FFCustomMsgBox
Failed in obtaining the button image (Urgent button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31154
FFCustomMsgBox
Failed in obtaining the button image (Study completed button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31155
FFCustomMsgBox
Failed in obtaining the button image (Update button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31158
FFCustomMsgBox
Failed in obtaining the button image (New button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31159
FFCustomMsgBox
Failed in obtaining the button image (Auto print control button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31160
FFCustomMsgBox
Failed in obtaining the button image (Re-shoot button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31161
FFCustomMsgBox
Failed in obtaining the button image (Add button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31162
FFCustomMsgBox
Failed in obtaining the button image (Delete button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31163
FFCustomMsgBox
Failed in obtaining the button image (Before scroll button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31164
FFCustomMsgBox
Failed in obtaining the button image (After Scroll button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31165
FFCustomMsgBox
Failed in obtaining the system It is conceivable that the bitmap file was setting information (Series issuing damaged or deleted. type).
Restart. If the same symptom recurs, perform a reinstallation.
31166
FFCustomMsgBox
Failed in obtaining the button image (QA button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31167
FFCustomMsgBox
Failed in obtaining the button image (Change button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31168
FFCustomMsgBox
Failed in obtaining the cassette insertion disabled image.
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31169
FFCustomMsgBox
Failed in obtaining the image icon It is conceivable that the bitmap file was (Mis-exposure). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31170
FFCustomMsgBox
Failed in obtaining the button image (Image style button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31171
FFCustomMsgBox
Failed in obtaining the button image (No. of output film button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31172
FFCustomMsgBox
Failed in obtaining the tool tip (New button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-190
Appx MT 1-191 Event
Event Source
Description
Causes
Remedies
31173
FFCustomMsgBox
Failed in obtaining the tool tip (Auto print control button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31174
FFCustomMsgBox
Failed in obtaining the tool tip (Re- It is conceivable that the database file was shoot button). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31175
FFCustomMsgBox
Failed in obtaining the tool tip (Add It is conceivable that the database file was button). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31176
FFCustomMsgBox
Failed in obtaining the tool tip (Delete button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31177
FFCustomMsgBox
Failed in obtaining the tool tip (Before scroll button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31178
FFCustomMsgBox
Failed in obtaining the tool tip (After scroll button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31179
FFCustomMsgBox
Failed in obtaining the tool tip (Monitor mode button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31180
FFCustomMsgBox
Failed in obtaining the tool tip (QA It is conceivable that the database file was button). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31181
FFCustomMsgBox
Failed in obtaining the tool tip (Change button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31182
FFCustomMsgBox
Failed in obtaining the tool tip (Rotation/Inversion button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31183
FFCustomMsgBox
Failed in obtaining the tool tip (EDR mode button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31184
FFCustomMsgBox
Failed in obtaining the tool tip (Image format button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31185
FFCustomMsgBox
Failed in obtaining the tool tip It is conceivable that the database file was (Change menu parameter button). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31186
FFCustomMsgBox
Failed in obtaining the registry information (Set No.).
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31187
FFCustomMsgBox
Failed in setting the registry information (Set No.).
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31188
FFCustomMsgBox
Failed in obtaining the system setting information (System ID).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31189
FFCustomMsgBox
Failed in obtaining the system setting information (Autodistribution instruction information).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31191
FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (Selector auto- damaged or deleted. switchover information).
Restart. If the same symptom recurs, perform a reinstallation.
31192
FFCustomMsgBox
Failed in obtaining the system setting information (Menu autosequence information).
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
It is conceivable that the database file was damaged or deleted.
CR-IR 391CL Service Manual
Remarks
Appx MT 1-191
Appx MT 1-192 Event
Event Source
Description
Causes
Remedies
31193
FFCustomMsgBox
Failed in obtaining the system setting information (Set No. minimum value information).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31194
FFCustomMsgBox
Failed in obtaining the system setting information (Set No. maximum value information).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31196
FFCustomMsgBox
Failed in obtaining the system setting information (Series information issuing method).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31197
FFCustomMsgBox
No matching work ID exists.
The contents of the image file did not agree Perform “Initialization of image database.” with those of the image database.
31198
FFCustomMsgBox
Failed in distribution process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31202 FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (Patient damaged or deleted. information online serial port No.).
Restart. If the same symptom recurs, perform a reinstallation.
31203 FFCustomMsgBox
Failed in obtaining the system setting information (Patient information online device name.).
Restart. If the same symptom recurs, perform a reinstallation.
31207 FFCustomMsgBox
Failed in setting the Image Reader The system was unstable. machine code.
Restart. If the same symptom recurs, perform a reinstallation.
31208 FFCustomMsgBox
Failed in obtaining the button image (New button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31210 FFCustomMsgBox
Failed in obtaining the system setting information (Image rotation/inversion selectable range).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31211
Failed in obtaining the button image (frontal image button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31212 FFCustomMsgBox
Failed in obtaining the button image (Left-right invert button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31213 FFCustomMsgBox
Failed in obtaining the button image (Upside-down invert button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31214 FFCustomMsgBox
Failed in obtaining the button image (180 degree rotation button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31215 FFCustomMsgBox
Failed in obtaining the button It is conceivable that the bitmap file was image (90 degree rotation button). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31218 FFCustomMsgBox
Failed in obtaining the system setting information (Image format selectable range).
Restart. If the same symptom recurs, perform a reinstallation.
FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
It is conceivable that the database file was damaged or deleted.
It is conceivable that the database file was damaged or deleted.
Remarks
CR-IR 391CL Service Manual
Appx MT 1-192
Appx MT 1-193 Event
Event Source
Description
Causes
Remedies
31219 FFCustomMsgBox
Failed in obtaining the button image (SINGLE button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31220 FFCustomMsgBox
Failed in obtaining the button image (TWIN button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31225 FFCustomMsgBox
Failed in obtaining the connection It is conceivable that the file was damaged Restart. If the same symptom recurs, characters to the film annotation or deleted. perform a reinstallation. database.
31226 FFCustomMsgBox
Failed in connecting characters to It is conceivable that the database file was the film annotation database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31227 FFCustomMsgBox
Failed in obtaining information It is conceivable that the database file was from the film annotation database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31232 FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (Maximum No. damaged or deleted. of output film).
Restart. If the same symptom recurs, perform a reinstallation.
31235 FFCustomMsgBox
Failed in obtaining the caption information (CS).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31236 FFCustomMsgBox
Failed in obtaining the caption information (SS).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31241 FFCustomMsgBox
Failed in making thumbnail The system was unstable. images in image input subsystem.
Restart. If the same symptom recurs, perform a reinstallation.
31242 FFCustomMsgBox
Failed in processing in image input subsystem.
Restart. If the same symptom recurs, perform a reinstallation.
31243 FFCustomMsgBox
Image format information is illegal. A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31244 FFCustomMsgBox
Annotation information is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31245 FFCustomMsgBox
No. of output film information is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31246 FFCustomMsgBox
Distribution code information is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31247 FFCustomMsgBox
Image reading sensitivity is illegal. A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31248 FFCustomMsgBox
Average output density is illegal.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
020-221-02E 01.08.2010 FM5563
The system was unstable.
A value in the image file conflicted with a system setting.
CR-IR 391CL Service Manual
Remarks
Appx MT 1-193
Appx MT 1-194 Event
Event Source
Description
Causes
Remedies
31249 FFCustomMsgBox
EDR mode is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31250 FFCustomMsgBox
Image filing mode is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31251 FFCustomMsgBox
Function mode is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31252 FFCustomMsgBox
IP logical size information is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31253 FFCustomMsgBox
Contrast shift is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31254 FFCustomMsgBox
The sensitivity shift information is illegal.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31255 FFCustomMsgBox
There is a discrepancy between system setting and image information.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31256 FFCustomMsgBox
There is a discrepancy between system setting and image information.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31257 FFCustomMsgBox
There is a discrepancy between system setting and image information.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31258 FFCustomMsgBox
There is a discrepancy between system setting and image information.
A value in the image file conflicted with a system setting.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31259 FFCustomMsgBox
Failed in obtaining the image invert/rotate information.
It is conceivable that the image information Delete the associated examination. If the was damaged. same symptom recurs after deletion, perform a reinstallation.
31260 FFCustomMsgBox
Failed in obtaining the image format information.
A value in the image file conflicted with a system setting.
31261 FFCustomMsgBox
Failed in obtaining the image format information.
It is conceivable that the image information Delete the associated examination. If the was damaged. same symptom recurs after deletion, perform a reinstallation.
31262 FFCustomMsgBox
Film annotation is illegal.
The registered film mark contained an unacceptable character.
With the User Utility, correct the film mark settings as needed.
31265 FFCustomMsgBox
Failed in obtaining the caption information (FIX).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
Remarks
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
CR-IR 391CL Service Manual
Appx MT 1-194
Appx MT 1-195 Event
Event Source
Description
Causes
Remedies
31266 FFCustomMsgBox
Failed in obtaining the caption information (S value).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31267 FFCustomMsgBox
Failed in obtaining the caption information (SEMI-X).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31268 FFCustomMsgBox
Failed in obtaining the caption information (Density Average).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31269 FFCustomMsgBox
Failed in obtaining the system setting information (EDR mode selectable range).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31270 FFCustomMsgBox
Input value is illegal.
The entered value contained an Make a proper entry. unacceptable character or was out of range or otherwise abnormal.
31272 FFCustomMsgBox
Failed in obtaining the system setting information (Function selectable range).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31273 FFCustomMsgBox
Failed in setting the function information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31274 FFCustomMsgBox
Failed in setting the No. of output film.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31277 FFCustomMsgBox
Failed in setting the contrast shift. The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31278 FFCustomMsgBox
Failed in setting the sensitivity shift.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31279 FFCustomMsgBox
Failed in setting the EDR mode information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31280 FFCustomMsgBox
Failed in setting the FIX mode S value.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31281 FFCustomMsgBox
Failed in setting the SEMI-X mode The system was unstable. average output density.
Restart. If the same symptom recurs, perform a reinstallation.
31282 FFCustomMsgBox
Failed in QA starting process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31284 FFCustomMsgBox
Failed in obtaining the system setting information (Filing mode selectable range).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31285 FFCustomMsgBox
Failed in setting the image filing information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31288 FFCustomMsgBox
Failed in obtaining the distribution The system was unstable. destination information.
Restart. If the same symptom recurs, perform a reinstallation.
31290 FFCustomMsgBox
Failed in obtaining IP logical size information.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
The system was unstable.
CR-IR 391CL Service Manual
Remarks
Appx MT 1-195
Appx MT 1-196 Event
Event Source
Description
Causes
Remedies
31291 FFCustomMsgBox
Failed in obtaining the system setting information (Distribution code change).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31292 FFCustomMsgBox
Failed in obtaining the system setting information (Film annotation change).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31293 FFCustomMsgBox
Failed in obtaining the system setting information (Function change).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31294 FFCustomMsgBox
Failed in terminating process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31295 FFCustomMsgBox
Failed in terminating process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31296 FFCustomMsgBox
Failed in updating the list display.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31300 FFInput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred.\nPlease reactivate server PC.
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
31300 FFCustomMsgBox
An error of unknown cause occurred.
31303 FFCustomMsgBox
Failed in obtaining study instance UID from list (Waiting for study).
It is highly probable that the program was faulty.
31304 FFCustomMsgBox
Failed in obtaining study instance UID from list (Waiting for QA).
It is highly probable that the program was faulty.
31305 FFCustomMsgBox
Failed in obtaining study instance UID from list (Waiting for output).
It is highly probable that the program was faulty.
31306 FFCustomMsgBox
Failed in obtaining study instance UID from list (Already output).
It is highly probable that the program was faulty.
31307 FFCustomMsgBox
Failed in obtaining study instance UID from list (All).
It is highly probable that the program was faulty.
31308 FFCustomMsgBox
Failed in obtaining study instance UID from list (Today).
It is highly probable that the program was faulty.
31309 FFCustomMsgBox
Failed in updating the list (Waiting The system was unstable. for study) display.
Restart. If the same symptom recurs, perform a reinstallation.
31310 FFCustomMsgBox
Failed in updating the list (Waiting The system was unstable. for QA) display.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-196
Appx MT 1-197 Event 31311
Event Source
Description
Causes
Remedies
FFCustomMsgBox
Failed in updating the list (Waiting The system was unstable. for output) display.
Restart. If the same symptom recurs, perform a reinstallation.
31312 FFCustomMsgBox
Failed in updating the list (Already The system was unstable. output) display.
Restart. If the same symptom recurs, perform a reinstallation.
31313 FFCustomMsgBox
Failed in updating the list (All) display.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31314 FFCustomMsgBox
Failed in updating the list (Today) display.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31315 FFCustomMsgBox
No. of selected studies is illegal. Study cannot be started.
It is highly probable that the program was faulty.
Select only one study and execute.
31316 FFCustomMsgBox
Failed in study starting process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31317 FFCustomMsgBox
No. of selected studies is illegal. QA cannot be started.
It is highly probable that the program was faulty.
31318 FFCustomMsgBox
Failed in QA starting process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31319 FFCustomMsgBox
Failed in QA starting process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31320 FFCustomMsgBox
Failed in obtaining the system setting information (Operational mode after studying).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31321 FFCustomMsgBox
Failed in obtaining the button image (Utility button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31322 FFCustomMsgBox
Failed in obtaining the patient information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31323 FFCustomMsgBox
Date of birth could not be Illegal birth date information was set. converted to the displaying format.
Delete the associated examination. If the same symptom recurs after deletion, perform a reinstallation.
31324 FFCustomMsgBox
Failed in obtaining the caption information (Stop alarm button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31329 FFCustomMsgBox
Message from the Image Reader could not be displayed.
The RU software version conflicted with the message file version on the CR-IR 391CL side or the RU message file was damaged or otherwise abnormal.
Confirm software version and setups on the RU side.
31330 FFCustomMsgBox
Failed in obtaining the caption information (System Terminating button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31331 FFCustomMsgBox
Failed in obtaining the caption information (User Utility button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31332 FFCustomMsgBox
Failed in obtaining the caption information (Study list setting button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-197
Appx MT 1-198 Event
Event Source
Description
Causes
Remedies
31333 FFCustomMsgBox
Failed in obtaining the caption information (Version displaying button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31334 FFCustomMsgBox
Failed in obtaining the caption information (Cancel button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31335 FFCustomMsgBox
Failed in obtaining the button image (Clear button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31336 FFCustomMsgBox
Failed in obtaining the tool tip information (Clear button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31337 FFCustomMsgBox
Failed in displaying the thumbnail images.
The thumbnail image file was damaged, deleted, or otherwise abnormal.
There are no processing problems except for the inability to display thumbnail images. If the same symptom frequently occurs, initialize the image database.
31339 FFCustomMsgBox
Failed in executing the scanner cleaning starting method of the Image Reader.
The RU is not ready for performing the method.
Check the RU status.
31340 FFCustomMsgBox
Failed in obtaining the caption information (Cancel button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31341 FFCustomMsgBox
Failed in obtaining the caption information (Scanner cleaning button).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31343 FFCustomMsgBox
Failed in inputting images.
It is conceivable that there was a problem with the RU or line.
Check the RU and line.
31344 FFCustomMsgBox
Image size could not be detected. It is conceivable that there was a problem with the RU.
Check the RU status.
31346 FFCustomMsgBox
Failed in obtaining Image Reader error information.
The RU software version conflicted with the message file version on the CR-IR 391CL side or the RU message file was damaged or otherwise abnormal.
Confirm software version and setups on the RU side.
31347 FFCustomMsgBox
Failed in obtaining Image Reader status information.
The RU software version conflicted with the message file version on the CR-IR 391CL side or the RU message file was damaged or otherwise abnormal.
Confirm software version and setups on the RU side.
31348 FFCustomMsgBox
Failed in thumbnail image creation The thumbnail image file was damaged, process. deleted, or otherwise abnormal.
There are no processing problems except for the inability to display thumbnail images. If the same symptom frequently occurs, initialize the image database.
31349 FFCustomMsgBox
Failed in saving the list display setting (Waiting for study).
It is conceivable that the system was unstable or that the program was faulty.
Restart. If the same symptom recurs, perform a reinstallation.
31350 FFCustomMsgBox
Failed in saving the list display setting (Waiting for QA).
It is conceivable that the system was unstable or that the program was faulty.
Restart. If the same symptom recurs, perform a reinstallation.
31351 FFCustomMsgBox
Failed in saving the list display setting (Waiting for output).
It is conceivable that the system was unstable or that the program was faulty.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-198
Appx MT 1-199 Event
Event Source
Description
Causes
Remedies
31352 FFCustomMsgBox
Failed in saving the list display setting (Already output).
It is conceivable that the system was unstable or that the program was faulty.
Restart. If the same symptom recurs, perform a reinstallation.
31353 FFCustomMsgBox
Failed in saving the list display setting (All).
It is conceivable that the system was unstable or that the program was faulty.
Restart. If the same symptom recurs, perform a reinstallation.
31354 FFCustomMsgBox
Failed in saving the list display setting (Today).
It is conceivable that the system was unstable or that the program was faulty.
Restart. If the same symptom recurs, perform a reinstallation.
31355 FFCustomMsgBox
Failed in customizing the list display.
It is conceivable that the system was unstable or that the program was faulty.
Restart. If the same symptom recurs, perform a reinstallation.
31356 FFCustomMsgBox
Failed in obtaining system setting information (Default menu code).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31358 FFCustomMsgBox
Failed in obtaining the tool tip text. It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31359 FFCustomMsgBox
Failed in obtaining the caption information (Title bar).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31360 FFCustomMsgBox
Failed in obtaining the caption information (Option label).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31361 FFCustomMsgBox
Failed in obtaining the version information.
It is conceivable that the file was damaged Restart. If the same symptom recurs, or deleted. perform a reinstallation.
31362 FFCustomMsgBox
Option list could not be obtained.
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31363 FFCustomMsgBox
Failed in obtaining the registry information (Next multiple frame set No.).
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31364 FFCustomMsgBox
Failed in setting the registry information (Next multi-frame set No.).
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31365 FFCustomMsgBox
Failed in obtaining the system It is conceivable that the database file was setting information (Series issuing damaged or deleted. type).
Restart. If the same symptom recurs, perform a reinstallation.
31366 FFCustomMsgBox
Failed in obtaining the multi-frame The system was unstable. UID information.
Restart. If the same symptom recurs, perform a reinstallation.
31367 FFCustomMsgBox
Failed in obtaining the cassette insertion enabled image.
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31368 FFCustomMsgBox
Failed in obtaining the cassette insertion disabled image.
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31369 FFCustomMsgBox
Failed in obtaining the image icon It is conceivable that the bitmap file was (Mis-exposure). damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31370 FFCustomMsgBox
Failed in obtaining the button image (Image style button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31371 FFCustomMsgBox
Failed in obtaining the button image (EDR button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-199
Appx MT 1-200 Event
Event Source
Description
Causes
Remedies
31372 FFCustomMsgBox
Failed in obtaining the button image (Function button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31373 FFCustomMsgBox
Failed in obtaining the button image (No. of output film button)
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31374 FFCustomMsgBox
Failed in obtaining the button image (IP size button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31375 FFCustomMsgBox
Failed in obtaining the button image (Film format button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31376 FFCustomMsgBox
Failed in obtaining the button image (Filing button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31377 FFCustomMsgBox
Failed in obtaining the button image (Film annotation button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31378 FFCustomMsgBox
Failed in obtaining the button image (Distribution code button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31379 FFCustomMsgBox
Failed in obtaining the button image (CS/SS button).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31380 FFCustomMsgBox
Failed in obtaining system setting information (Serial port No. for connecting to XCON).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31381 FFCustomMsgBox
Failed in obtaining the XCON device name.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31382 FFCustomMsgBox
Image data line to the Image Reader (%s) has broken.
The line was abnormal.
31386 FFCustomMsgBox
Failed in obtaining the caption information.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31387 FFCustomMsgBox
Failed in reading the bit-map file.
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31388 FFCustomMsgBox
Failed in obtaining the font information.
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31389 FFCustomMsgBox
Failed in refreshing the list.
It is conceivable that the system was unstable or that the program was faulty.
Restart. If the same symptom recurs, perform a reinstallation.
31390 FFCustomMsgBox
Requesting department code is illegal.
The entered value contained an Make a proper entry. unacceptable character or was out of range or otherwise abnormal.
31391 FFCustomMsgBox
Technologist code is illegal.
The entered value contained an Make a proper entry. unacceptable character or was out of range or otherwise abnormal.
31392 FFCustomMsgBox
Failed in searching the patient information.
Nothing matched the entered patient information.
31393 FFCustomMsgBox
Failed in setting the connecting status to the RIS.
This error is attributable to an RIS problem Check RIS-side status or RIS setup. or RIS setup problem.
020-221-02E 01.08.2010 FM5563
Remarks
Check the patient information.
CR-IR 391CL Service Manual
Appx MT 1-200
Appx MT 1-201 Event
Event Source
Description
Causes
Remedies
31394 FFCustomMsgBox
Failed in obtaining the data.
This error is attributable to an RIS problem Check RIS-side status or RIS setup. or RIS setup problem.
31395 FFCustomMsgBox
Failed in requesting of study start (PPS).
The error is attributable, for instance, to an Check, for instance, the server operation inactive server or incorrect network status and network settings. settings.
31396 FFCustomMsgBox
Failed in requesting of study termination (PPS).
The error is attributable, for instance, to an Check, for instance, the server operation inactive server or incorrect network status and network settings. settings.
31397 FFCustomMsgBox
Failed in requesting of study abort The error is attributable, for instance, to an Check, for instance, the server operation (PPS). inactive server or incorrect network status and network settings. settings.
31398 FFCustomMsgBox
Can not terminate.
31399 FFCustomMsgBox
Failed in obtaining the label caption.
31400 FFCustomMsgBox
Menu selected does not exist.
31401 FFCustomMsgBox
Failed in obtaining the path information (image data folder).
It is conceivable that the file was damaged Restart. If the same symptom recurs, or deleted. perform a reinstallation.
31402 FFCustomMsgBox
Failed in obtaining the parameter icon image.
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31403 FFCustomMsgBox
Failed in obtaining the caption information.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31404 FFCustomMsgBox
Failed in communication with the connected device.
The error is attributable to a problem with the connected equipment or connection setup.
Check the connected equipment, connection setup, and others.
31405 FFCustomMsgBox
Failed in evacuating the IP.
The connected equipment may be faulty.
Confirm the connected device.
31406 FFCustomMsgBox
Failed in setting the IP.
The connected equipment may be faulty.
Confirm the connected device.
31407 FFCustomMsgBox
Failed in setting the exposure size.
The connected equipment may be faulty.
Confirm the connected device.
31408 FFCustomMsgBox
Failed in setting the reference position for exposure.
The connected equipment may be faulty.
Confirm the connected device.
31409 FFCustomMsgBox
No response from the connected device.
The connected equipment may be faulty.
Confirm the connected device.
31410 FFCustomMsgBox
No response from the device sharing ID information.
The connected equipment may be faulty.
Confirm the connected device.
31411
A study cannot be registered because the exposure menu registered in IDT is not registered in the CR-IR 391CL.
This error is attributable to an improperly registered menu.
Check the menu registration information.
FFCustomMsgBox
31412 FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
It is conceivable that the database file was damaged or deleted.
An image data line with the reader The connected equipment may be faulty. is cut off.
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
Confirm the connected device.
CR-IR 391CL Service Manual
Appx MT 1-201
Appx MT 1-202 Event
Event Source
Description
Causes
Remedies
31413 FFCustomMsgBox
Inconsistencies exist in the CR-IR The connection setup may be faulty. 391CL-RU connection setting of the system configuration.
Check the connection setup.
31414 FFCustomMsgBox
Failed in obtaining the caption information (RIS tab).
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31415 FFCustomMsgBox
A communication error with RIS occurred.
The connected equipment may be faulty.
Confirm the connected device.
31416 FFCustomMsgBox
Some exposure menus couldn’t be registered.
This error is attributable to an improperly set menu parameter or other setup failure.
Check settings.
31417 FFCustomMsgBox
An exposure menu couldn’t be registered.
This error is attributable to an improperly set menu parameter or other setup failure.
Check settings.
31418 FFCustomMsgBox
Failed in the reference of the reader device.
The connection setup may be faulty.
Check the connection setup.
31419 FFCustomMsgBox
The condition value transmitted to The XCON settings (limit values) were x-ray device exceeded restriction. inconsistent with the exposure condition preset values for the menus.
There is no practical problem because the limit values are transferred to the XCON.
31420 FFCustomMsgBox
A communication error with RIS occurred.
Confirm the connected device.
31421 FFCustomMsgBox
An exposure menu couldn’t be decided.
31422 FFCustomMsgBox
Failed in registering the study to the patient information database.
The patient information database operation Restart. If the same symptom recurs, was wrong. perform a reinstallation.
31423 FFCustomMsgBox
Failed in image stitching processing.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31424 FFCustomMsgBox
Failed in saving the exposure result information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31425 FFCustomMsgBox
Failed in determining actual exposure result values.
Invalid characters were used for the performed procedure step description, protocol name, or filter type. The radiation source-to-detector distance or radiation time did not consist of numerals only. The film output count or film size ID was out of range.
Since a standard setting will be used as a substitute to continue with the process, no particular response is required.
31426 FFCustomMsgBox
Failed in acquiring coloring information.
The settings might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
31427 FFCustomMsgBox
Failed in distribution process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31428 FFCustomMsgBox
Failed in displaying the study information list.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31429 FFCustomMsgBox
Failed in setting patient information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
The connected equipment may be faulty.
Remarks
Select a menu appropriate for the exposure, and then press the OK button that is displayed at the bottom of the window.
CR-IR 391CL Service Manual
Appx MT 1-202
Appx MT 1-203 Event
Event Source
Description
Causes
Remedies
31430 FFCustomMsgBox
Failed in obtaining the patient information.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31431 FFCustomMsgBox
Failed in acquiring image (background).
It is conceivable that the bitmap file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
31432 FFCustomMsgBox
Failed in study transmission processing.
Confirm connection to the other equipment.
31433 FFCustomMsgBox
Failed in study reception processing.
Confirm connection to the other equipment.
31434 FFCustomMsgBox
Failed in connection to the other equipment. Some studies have not been registered appropriately.
Confirm connection to the other equipment.
31435 FFCustomMsgBox
Failed in connection with the equipment. No studies have been registered successfully.
Confirm connection to the other equipment.
31436 FFCustomMsgBox
Failed in mis-exposure processing.
31437 FFCustomMsgBox
Failed in connection to the technologist database.
31438 FFCustomMsgBox
Failed in registering exposure menus.
Check the equipment.
31439 FFCustomMsgBox
Some exposure menus have not been registered appropriately.
Check the equipment.
31440 FFCustomMsgBox
Connection to the portable equipment cannot be performed.
Re-set the portable equipment and then operate it again.
31463 FFCustomMsgBox
Failed in mis-exposure processing.
31471 FFCustomMsgBox
An attempt to restore images resulted in a failure.
31472 FFCustomMsgBox
An attempt to acquire values from the Image Reader status information database resulted in a failure.
31473 FFInput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the acquisition of the value from the error information database [ReaderUnit (RU)] Status information may not be displayed.
020-221-02E 01.08.2010 FM5563
Value acquisition from the image reader error information database failed while the connection to the image reader was established. The status information may not be displayed normally.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-203
Appx MT 1-204 Event
Event Source
Description
Causes
Remedies
31473 FFCustomMsgBox
An attempt to acquire values from the Image Reader error information database resulted in a failure.
31474 FFInput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nfailed in the record of IP use frequency while reading Image.
31474 FFCustomMsgBox
An attempt to register a count of IP use frequency resulted in a failure.
Press the button and continue the process.
31475 FFInput
ErrorCode:%1%nSubSystem:%2 The image could not be input during the %nSourceFile: %3%nSpotCode: image input process because the free %4%nDisk capacity shortage: The space on the disk was insufficient. input of the image cannot be executed
Delete unnecessary files, and then input the image.
31475 FFCustomMsgBox
Image input is disabled due to insufficient free space remaining on the disk.
Delete unnecessary files and retry image input.
31476 FFCustomMsgBox
An error may have occurred while inputting images from the Image Reader before.
● Operate according to the message displayed when the study starts.
31478 FFInput
It failed in the acquisition of the value from the system setting database. It sets it as displayed.
The settings for RU patient information Reinstall the system. display were not found in the system setup database.
31500 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in acquisition. Can not get information from LangStr.mdb.
The character string was not successfully acquired. An internal system error occurred.
31500 FFCustomMsgBox
An attempt to acquire character strings resulted in a failure. Existing character strings are displayed.
020-221-02E 01.08.2010 FM5563
The IP use count was not successfully recorded during image reading.
Restart. If the same symptom recurs, perform a reinstallation.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
CR-IR 391CL Service Manual
Appx MT 1-204
Appx MT 1-205 Event
Event Source
Description
Causes
Remedies
31501 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in acquisition. Can not get information from LangMsgBox.mdb.
31501 FFCustomMsgBox
An attempt to acquire messages failed. Existing character strings are displayed.
31502 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe user is not logged in.
The user is not logged in.
31502 FFCustomMsgBox
The user has not logged in.
User cannot be identified. The reason for Retry logging onto the system. such fact may be attributed to the following: (1) The user was logged off the system while in operation. (2) The user is not logged on the system. (3) The server computer is not accessible.
31503 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt is a logoffed user.
This user is logged off.
31503 FFCustomMsgBox
This user has been logged off the system.
31504 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt is an illegal user.
020-221-02E 01.08.2010 FM5563
Message acquisition failed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart the server computer.
Log in.
Nothing particular.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Retry logging onto the system. An unauthorized user attempted to log in.
Log in.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-205
Appx MT 1-206 Event
Event Source
Description
Causes
Remedies
31504 FFCustomMsgBox
An illegal user has been logged on the system.
Retry logging onto the system.
31505 FCRWeb
ErrorCode:%1%nSubSystem:%2 The current user does not have the %nSourceFile: %3%nSpotCode: privilege for performing this operation. %4%nThe login user doesn’t have the execution authority.
Log in as a user with operating privileges, and then retry.
31505 FFCustomMsgBox
You are not authorized to perform this operation.
Log onto the system with a properly authorized user name to retry this operation.
31506 FCRWeb
ErrorCode:%1%nSubSystem: %2%nSourceFile: %3%nSpotCode:%4%n The inspection is excluding it.
The selected study was being modified or examined by another computer.
31506 FFCustomMsgBox
31507 FCRWeb
020-221-02E 01.08.2010 FM5563
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Wait until the operation by the other computer terminates, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
[31506] Selected study is being modified or performed. *Please “Complete” or “Suspend” ongoing study. >If the computer currently in use is unable to check, the study may be used by other user. >Otherwise, please restart all computers of this system.
Just as the message states.
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nRU is excluding it.
The selected study was being examined by Wait until the operation by the other another computer. computer terminates, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-206
Appx MT 1-207
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-207
Appx MT 1-208 Event
Event Source
Description
Causes
31507 FFCustomMsgBox
[31507] A study is being performed. *Please “Complete” or “Suspend” ongoing study. >If the computer currently in use is unable to check, the study may be used by other user. >Otherwise, please restart all computers of this system.
31508 FCRWeb
ErrorCode:%1%nSubSystem:%2 The selected study was being modified or %nSourceFile: %3%nSpotCode: examined by another computer. %4%nThe inspection is excluding it.
31508 FFCustomMsgBox
Remedies
Remarks
Just as the message states.
Wait until the operation by the other computer terminates, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
[31508] Selected study is being modified or performed. *Please “Complete” or “Suspend” ongoing study. >If the computer currently in use is unable to check, the study may be used by other user. >Otherwise, please restart all computers of this system.
Just as the message states.
31509 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nRU is excluding it.
The selected study was being examined by Wait until the operation by the other another computer. computer terminates, and then retry.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
31509 FFCustomMsgBox
[31509] A study is being performed. *Please “Complete” or “Suspend” ongoing study. >If the computer currently in use is unable to check, the study may be used by other user. >Otherwise, please restart all computers of this system.
Just as the message states.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-208
Appx MT 1-209 Event
Event Source
Description
Causes
31510 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition. Can not get information from EKarte.
The information could not be acquired from an electronic medical chart. This error is attributable to an incorrect setting in the Service Utility or an unconnected network.
31510 FFCustomMsgBox
An attempt to acquire information from the EMR resulted in a failure. Possible causes are: 1. EMR not started. 2. CL not connected to the EMR.
31511
FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe inspection has already been deleted.
31511
FFCustomMsgBox
Study selected has already been deleted.
Press [Update] to have the latest status displayed and then retry.
31527 FFCustomMsgBox
An attempt to acquire information from the receipt computer resulted in a failure. Possible causes are: 1. Receipt computer not started. 2. CL not connected to the receipt computer.
Check the connection to the receipt computer. Retransmit then the study from the receipt computer.
31528 FFCustomMsgBox
Settings to store images are about to be canceled.
● Images cannot be stored if continuing this operation. ❍ Do you wish to continue?
31529 FFCustomMsgBox
This study has been locked.
● Unlock the study and retry if you wish to delete the study.
31530 FFCusto]MsgBox
The status of the verified study will be Completed, and an exposure will start again.
❍ Do you wish to continue?
31531 FFCustomMsgBox
The study on which image input was interrupted will resume .
31532 FFCustomMsgBox
A study different from the image input-interrupted study will start.
020-221-02E 01.08.2010 FM5563
Remedies With the Service Utility, check the electronic medical chart settings. If the settings are correct, check the network cable, hub, and other network devices.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Confirm connection to the electronic medical chart device and retry communication. Continue processing if no information is acquired from the electronic medical chart device. The selected study was already deleted.
Nothing particular.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Notice: To continue, re-verify operations necessary to verify studies.
❍ Are you sure?
CR-IR 391CL Service Manual
Appx MT 1-209
Appx MT 1-210 Event
Event Source
31533 FFCustomMsgBox
Description
Causes
Image acquisition failed.
Remedies
Remarks
● Check connection between the network cable and the hub. Close this dialog to resume receiving images. Note: It may take about 10 minutes to resume. Close this dialog and wait for a while. Do not terminate the study until images are received.
31534 FFCustomMsgBox
An error occurred during image processing.
This event will not be displayed.
31535 FFCustomMsgBox
The Image Reader may be in use.
❍ Do you wish to continue?
31536 FFCustomMsgBox
Communication with the EMR resulted in a failure.
● Confirm connection to the EMR device and retry.
31537 FFCustomMsgBox
An error is received from the EMR.
● Contact your administrator.
31538 FFCustomMsgBox
A fatal error occurred.
● Contact your administrator.
31539 FFCustomMsgBox
There are no applicable patients.
31842 FFCustomMsgBox
There are two or more same studies on the P.Console.
31850 FFCustomMsgBox
An attempt to connect to X-ray generator resulted in a failure
It is conceivable that the connected equipment may have a problem or the network may be unstable.
Confirm the connected device.
31851 FFCustomMsgBox
An attempt to register reserved studies resulted in a failure
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31852 FFCustomMsgBox
An attempt to start reserved studies resulted in a failure.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31853 FFCustomMsgBox
An error occurred with connecting The system was unstable. devices.
Restart. If the same symptom recurs, perform a reinstallation.
31854 FFCustomMsgBox
An attempt to search reserved studies resulted in a failure.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
31855 FFCustomMsgBox
Received illegal data.
It is conceivable that the connected equipment may have transmitted illegal information.
Check information transmitted from the connected equipment.
32300 FFInput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe unknown error occurred.\nPlease reactivate server PC.
An unknown error occurred during initialization process.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
Delete duplicate instances of a study.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-210
Appx MT 1-211 Event
Event Source
32500 FCRWeb
Description
A system setup value could not be acquired. The database might be damaged.
Remedies
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32500 CommonDefinition.cs In a situation where patient name This error is attributable to improper user text box IME control is exercised setup or application abnormality. so that alphabetical characters are used for pronunciation automatic input, the pronunciation automatic input definition is disabled Or, an attempt to acquire the pronunciation automatic input definition resulted in a failure.
Check the user settings. This error may occur when the user settings are defined so that a 1-byte alphanumeric pronunciation can be automatically input for a patient name. If the same symptom recurs, restart the application.
ErrorCode: 17001122
32500 CommonDefinition.cs An attempt to acquire the IME The application is abnormal. setting from the setup file resulted in a failure.
ErrorCode: 17001123 Achieve recovery by restarting the application. If the restart does not help, you can enter a patient name that consists of 1-byte alphanumeric characters.
32501 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition. Can not get information from Registry.
Registry acquisition failed. The directory might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32502 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition. Can not get information from Directry.ini.
A Directory.ini file access error occurred. The file might be damaged.
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32503 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the output of the operation log.
The operation log was not successfully output. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition Can not get information from SysConfig.mdb.
Causes
CR-IR 391CL Service Manual
Appx MT 1-211
Appx MT 1-212 Event
Event Source
Description
Causes
Remedies
Remarks
32504 FCRWeb
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition. Can not get information from NetConfib.mdb.
An error occurred when an attempt was made to access a NetConfig.mdb file. The file might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32550 FFCrExamCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the information acquisition. Can not get information from Directry.ini.
A Directory.ini file access error occurred. The file might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32551 FFCrExamCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in system construction DB (API) access.
A system setup value could not be acquired. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32600 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the value acquisition of Directry.ini.
A Directory.ini file access error occurred. The file might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32601 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the value acquisition of SysConfig.
A system setup value could not be acquired. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-212
Appx MT 1-213 Event
Event Source
Description
Causes
Remedies
Remarks
32602 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 Registry acquisition failed. The directory %nSourceFile: %3%nSpotCode: might be damaged. %4%nIt failed in the acquisition of the registry.
32603 FFEntryAddCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while outputting the log.
An error occurred during log output. It is Restart both the server PC and client PC. conceivable that the free space on the hard If the same error recurs, perform a disk may be insufficient. reinstallation. If the free space on the hard disk is insufficient, delete unnecessary files.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32650 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the value acquisition of Directry.ini.
A Directory.ini file access error occurred. The file might be damaged.
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32651 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the value acquisition of SysConfig.
A system setup value could not be acquired. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32652 FFDelInvalidCom
ErrorCode:%1%nSubSystem:%2 Registry acquisition failed. The directory %nSourceFile: %3%nSpotCode: might be damaged. %4%nIt failed in the acquisition of the registry.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-213
Appx MT 1-214 Event
Event Source
32653 FFDelInvalidCom
Description
Remedies
Remarks
An error occurred during log output. It is Restart both the server PC and client PC. conceivable that the free space on the hard If the same error recurs, perform a disk may be insufficient. reinstallation. If the free space on the hard disk is insufficient, delete unnecessary files.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32700 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the value acquisition of Directry.ini.
A Directory.ini file access error occurred. The file might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32700 FFImageSwapCom
A Directory.ini file access error occurred. The file might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32701 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the value acquisition of Sysconfig.
A system setup value could not be acquired. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32702 FFImageSwapCom
A system setup value could not be acquired. The database might be damaged.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while outputting the log.
Causes
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the value acquisition of Directry.ini.
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt failed in the value acquisition of Sysconfig.
CR-IR 391CL Service Manual
Appx MT 1-214
Appx MT 1-215 Event
Event Source
Description
Causes
Remedies
Remarks
32703 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 Registry acquisition failed. The directory %nSourceFile: %3%nSpotCode: might be damaged. %4%nIt failed in the acquisition of the registry.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32704 FFImageSwapCom
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 Registry acquisition failed. The directory %nSourceFile: %3%nSpotCode: might be damaged. %4%nIt failed in the acquisition of the registry.
32705 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while outputting the log.
An error occurred during log output. It is Restart both the server application and conceivable that the free space on the hard client application. If the same error recurs, disk may be insufficient. perform a reinstallation. If the free space on the hard disk is insufficient, delete unnecessary files.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
32706 FFImageSwapCom
An error occurred during log output. It is Restart both the server application and conceivable that the free space on the hard client application. If the same error recurs, disk may be insufficient. perform a reinstallation. If the free space on the hard disk is insufficient, delete unnecessary files.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while outputting the log.
32707 FFMenuChangeCom ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while deleting the temporary file.
020-221-02E 01.08.2010 FM5563
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-215
Appx MT 1-216 Event
Event Source
Description
Causes
Remedies
Remarks
32708 FFImageSwapCom
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error occurred while deleting the temporary file.
[34529] The Height contains illegal character. > Single-byte numerical characters and period (.) are allowed for Height. Enter again.
Just as the message states.
34530 FFCustomMsgBox
[34530] The Weight contains illegal character. > Single-byte numerical characters and period (.) are allowed for Weight. Enter again.
Just as the message states.
34531 FFCustomMsgBox
[34531] The Height contains negative value. > Enter positive value for Height.
Just as the message states.
34532 FFCustomMsgBox
[34532] The Weight contains negative value. > Enter positive value for Weight.
Just as the message states.
34533 FFCustomMsgBox
[34533] The Responsible person Just as the message states. contains illegal character. > Any double-byte characters and the characters below cannot be used for Responsible person. Enter again. ”#%&+?\*@
Only for veterinary hospital.
34534 FFCustomMsgBox
[34534] The Responsible Just as the message states. organization contains illegal character. > The characters below cannot be used for Responsible organization. Enter again. ”#%&+?\*@
Only for veterinary hospital.
020-221-02E 01.08.2010 FM5563
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Nothing particular.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
CR-IR 391CL Service Manual
Appx MT 1-216
Appx MT 1-217 Event
Event Source
Description
Causes
Remedies
Remarks
34535 FFCustomMsgBox
[34535] The Species contains Just as the message states. illegal character. > The characters below cannot be used for Breed. Enter again. ”#%&+?\*@
Only for veterinary hospital.
34536 FFCustomMsgBox
[34536] The Breed contains illegal Just as the message states. character. > The characters below cannot be used for Species. Enter again. ”#%&+?\*@
Only for veterinary hospital.
34935 FFCustomMsgBox
[34935] Height contains invalid character. > Enter correct information.
Just as the message states.
Only for veterinary hospital.
34936 FFCustomMsgBox
[34936] Weight contains invalid character. > Enter correct information.
Just as the message states.
Only for veterinary hospital.
34937 FFCustomMsgBox
[34937] The patient comment is too long. > Enter correct information.
Just as the message states.
Only for veterinary hospital.
34938 FFCustomMsgBox
[34938] Responsible person's name is too long. > Enter correct information.
Just as the message states.
Only for veterinary hospital.
34939 FFCustomMsgBox
[34939] Responsible organization's name is too long. > Enter correct information.
Just as the message states.
34940 FFCustomMsgBox
[34940] The Breed contains illegal Just as the message states. character. > The characters below cannot be used for Breed. Enter again. ” # %% && + ? \ * @ <
Only for veterinary hospital.
34941 FFCustomMsgBox
[34941] The Species contains Just as the message states. illegal character. > The characters below cannot be used for Species. Enter again. ” # %% && + ? \ * @ <
Only for veterinary hospital.
34942 FFCustomMsgBox
[34942] The body length contains illegal character. > Only single-byte numerical characters and period (.) are allowed for Body length. Enter again.
020-221-02E 01.08.2010 FM5563
Just as the message states.
CR-IR 391CL Service Manual
Appx MT 1-217
Appx MT 1-218 Event
Event Source
Description
Causes
Remedies
Remarks
34943 FFCustomMsgBox
[34943] The Weight contains invalid character. > Only single-byte numerical characters and period (.) are allowed for Weight. Enter again.
40000 FFCustomMsgBox
An error of unknown cause occurred.
40000 QADataObjCom
File: Filename, Spot: Spot code, Code: Error code
The system settings were not successfully acquired.
Restart the system. Contact the support center.
40000 QAImgInfoObjCom
File: Filename, Spot: Spot code, Code: Error code
The system settings were not successfully acquired.
Restart the system. Contact the support center.
40000 QAImgObjCom
File: Filename, Spot: Spot code, Code: Error code
The system settings were not successfully acquired.
Restart the system. Contact the support center.
40000 QAMarkerObjCom
File: Filename, Spot: Spot code, Code: Error code
The system settings were not successfully acquired.
Restart the system. Contact the support center.
40000 QAMaskObjCom
File: Filename, Spot: Spot code, Code: Error code
The system settings were not successfully acquired.
Restart the system. Contact the support center.
40000 QAManagerCom
File: Filename, Spot: Spot code, Code: Error code
The system settings were not successfully acquired.
Restart the system. Contact the support center.
40000 ViFileTransferCom
ErrorCode:%1%nSubSystem:%2 The system settings were not successfully %nSourceFile:%3%nSpotCode:% acquired. The Directory.ini file might be 4%n Comment missing or damaged.
Check the Directory.ini file, and then restart %1=Error Code: The code that uniquely both the server application and client identifies an error. application. If the same error recurs, %2=Subsystem: The subsystem where an perform a reinstallation. error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
40001 FFCustomMsgBox
An error of unknown cause occurred.
Restart. If the same symptom recurs, perform a reinstallation.
40002 FFCustomMsgBox
An attempt to acquire study information failed.
40003 FFCustomMsgBox
Data storage failed. Modified data cannot be stored. Modified data may have been lost.
40004 FFCustomMsgBox
Failed in file output processing.
40005 FFCustomMsgBox
Paper print processing failed.
An error occurred during output processing. ● Confirm Windows’ regular printer setting and retry.
40006 FFCustomMsgBox
Film output processing failed.
An error occurred during output processing. ● Confirm the server computer status and retry.
020-221-02E 01.08.2010 FM5563
Just as the message states.
The system was unstable.
After the image browse window is closed, make sure that the server computer is running.
CR-IR 391CL Service Manual
Appx MT 1-218
Appx MT 1-219 Event
Event Source
Description
Causes
Remedies
40007 FFCustomMsgBox
Output processing of a work disk failed.
40008 FFCustomMsgBox
Failed in initialize processing.
In an environment where multiple client computers are connected, this can occur when client applications are started simultaneously.
Close the displayed message and restart the client application.
40009 FFCustomMsgBox
[40009] Failed in preset information operation. The following reason is presumable.
A problem has occurred for the database (SQL-Server).
Restart both the server application and client application. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
The max. preset limit for registrations has [40010] Registration cannot be performed due to exceeding of the been exceeded. max preset limit.
Delete a part of the registrations from the preset list on the preset list edit window and try again.
An error occurred during output processing. ● Confirm Windows’ regular printer setting and retry.
1. Database access erorr *Restart the server computer. >Contact your service engineer if restarting of the computer does not resolve the problem. 40010 FFCustomMsgBox
Remarks
*To add presets, delete some from the preset list. 40011
FFCustomMsgBox
[40011] The same preset name has already been registered.
Registration of an already existing preset name has been tried.
Change the preset name and try again.
*Change the preset name and then re-execute. 40100 FFMultiImgProc
An exception error occurred during a component operation.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An illegal parameter was encountered during a component operation.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
A file was not successfully accessed during Restart both the server application and %1=Error Code: The code that uniquely a component operation. client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
A memory related error occurred during a component operation.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during the normalization process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An illegal property was encountered during Restart both the server application and %1=Error Code: The code that uniquely the normalization process. client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An image information related error Restart both the server application and %1=Error Code: The code that uniquely occurred during the normalization process. client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
A memory related error occurred during the Restart both the server application and %1=Error Code: The code that uniquely normalization process. client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An internal table was not successfully created during the normalization process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during a CR image process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An illegal property was encountered during Restart both the server application and %1=Error Code: The code that uniquely a CR image process. client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An image information related error occurred during a CR image process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during the polarity conversion process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The polarity conversion process not successfully performed.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during an LUT Restart both the server application and %1=Error Code: The code that uniquely process. client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The file was not successfully accessed during an LUT process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during an image rotation/flipping process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Illegal properties were encountered when Restart both the server application and %1=Error Code: The code that uniquely an attempt was made to perform an image client application. If the same error recurs, identifies an error. rotation/flipping process. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An image information related error occurred during an image rotation/flipping process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The image rotation/flipping process was not successfully performed.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during the reduction process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The reduction process was not successfully Restart both the server application and %1=Error Code: The code that uniquely performed. client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during the JPEG lossless conversion process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The JPEG lossless conversion process was not successfully performed.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during the JPEG lossy conversion process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An attempt to perform the JPEG lossy conversion process failed.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception error occurred during a BMP conversion process.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
40400 FFCustomMsgBox
Communication between processes failed.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-225
Appx MT 1-226 Event
Event Source
Description
Causes
40400 VwAnnotation ObjCom
[File name][Function name][Error code]Comment
The method return value for the interprocess communication API resulted in an error.
Restart the system. Contact the support center.
40400 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The method return value for the interprocess communication API resulted in an error.
Restart the system. Contact the support center.
40403 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The method return value for the image database access control resulted in an error.
Restart the system, initialize the image database, and reinstall the application.
40404 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The method return value for the media database access control resulted in an error.
Restart the system, initialize the media database, and reinstall the application.
40405 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The method return value for the interprocess communication API resulted in an error.
Restart the system. Contact the support center.
40406 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: VwViewerCtrl. ctl[GetSysConfig] SpotCode: 0 SysConfig DB Access Error. VwSysDBOpen
A program error occurred.
Restart both the server PC and client PC
%1=Detailed error code
40406 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: VwViewerCtrl. ctl[GetSysConfig] SpotCode: 0 SysConfig DB Access Error. VwSysDBClose
A program error occurred.
Restart both the server PC and client PC
%1=Detailed error code
40406 FFCustomMsgBox
Access to the system setup database resulted in a failure.
The problem is attributable to the system setting database.
40406 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An error occurred when an attempt was made to connect or disconnect the system setup database access API, or acquire or set a value for the system setup database access API.
40407 FFCustomMsgBox
Access to the character string database resulted in a failure.
The problem is attributable to the character string database.
40407 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An error occurred with connection/ disconnection of the character string database access API.
020-221-02E 01.08.2010 FM5563
Remedies
Remarks
Restart and then check SysConfig.mdb.
Restart. Check LangStr.mdb.
CR-IR 391CL Service Manual
Appx MT 1-226
Appx MT 1-227 Event
Event Source
Description
Causes
Remedies
40407 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: %2 SpotCode: %3 LangStr DB Access Error. %4 %5
A program error occurred.
40408 FFCustomMsgBox
Access to the message box database resulted in a failure.
The problem is attributable to the message box database.
40408 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An error occurred with connection/ disconnection of the message box database access API.
Restart. Check LangMsgBox.mdb.
40409 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An error occurred when an attempt was made to connect or disconnect the flag database access API, or acquire or set a value for the flag database access API.
Restart, initialize the image database, and reinstall the application.
40411
FFCustomMsgBox
Access to the network setup database resulted in a failure.
The problem is attributable to the network setup database.
40411
VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An error occurred when an attempt was made to connect or disconnect the system setup database, or acquire or set a value for the system setup database (irreplaceable).
Restart and then check SysConfig.mdb.
40411
FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: %2 SpotCode: %3 NetConfig DB Access Error. %4 %5
A program error occurred.
Restart both the server PC and client PC
Restart both the server PC and client PC
40412 FFCustomMsgBox
Access to the customization setup The problem is attributable to the custom database resulted in a failure. setup database.
40412 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The method return value for the customize Restart, initialize the customization object was in error or illegal (irreplaceable). database, and reinstall the application.
41000 QADataObjCom
[File name][Function name][Error code]Comment
The hard disk was full.
Delete unnecessary images.
41000 QAImgInfoObjCom
[File name][Function name][Error code]Comment
The hard disk was full.
Delete unnecessary images.
41000 QAImgObjCom
[File name][Function name][Error code]Comment
The hard disk was full.
Delete unnecessary images.
41000 QAMarkerObjCom
[File name][Function name][Error code]Comment
The hard disk was full.
Delete unnecessary images.
41000 QAMaskObjCom
[File name][Function name][Error code]Comment
The hard disk was full.
Delete unnecessary images.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks %1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
%1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
ErrorCode:%1%nSubSystem:%2 The key character string was not specified. Restart. If the same symptom recurs, %nSourceFile:%3%nSpotCode:% perform a reinstallation. 4%n Comment
41002 FFCustomMsgBox
The hard disk is full.
The file to be copied was too large to fit onto the media at the receiving end.
ErrorCode:%1%nSubSystem:%2 A Directory.ini access error occurred. %nSourceFile:%3%nSpotCode:% The error is attributable to a nonexistent 4%n Comment file or an illegal definition in the file.
Check the Directory.ini file, and then restart %1=Error Code: The code that uniquely both the server application and client identifies an error. application. If the same error recurs, %2=Subsystem: The subsystem where an perform a reinstallation. error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
41003 FFCustomMsgBox
Destination for file copy is illegal.
An invalid pathname was specified as the file copy destination.
Check whether the folder exists at the file write destination.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-228
Appx MT 1-229 Event
Event Source
Description
Causes
Remedies
41003 ViClientInfoAccess
ErrorCode:%1%nSubSystem:%2 The specified setup information file was not Restart. If the same symptom recurs, %nSourceFile:%3%nSpotCode:% successfully accessed. The file might be perform a reinstallation. 4%n Comment damaged.
41004 FFCustomMsgBox
E-mail program cannot be started. Outlook was not properly set up.
Exit the CR-IR 391CL and then complete Outlook setup.
Press OK to close the image browse window and open the log-in window. To keep the image browse window open, press Cancel.
41017 FFCustomMsgBox
The system has already been logged off.
Press OK to close the image browse window and open the log-in window. To keep the image browse window open, press Cancel.
41018 FFCustomMsgBox
You have been logged off the system or User has been changed.
Press OK to close the image browse window and open the log-in window. To keep the image browse window open, press Cancel.
41019 FFCustomMsgBox
No printers have been registered.
Register printers and retry.
41020 FFCustomMsgBox
Free disk space is insufficient.
Delete unnecessary files to increase free disk space.
41025 FFCustomMsgBox
This study includes images not retrieved into the hard disk.
41026 FFCustomMsgBox
The processing cannot be continued in the specified study.
This operation is unable to perform. ● Reconfirm or verify this study.
41027 FFCustomMsgBox
Specified destination may have been a data storage disk. Notice: The disk will be inconsistent if storing in data storage disk.
❍ Are you sure you want to store?
020-221-02E 01.08.2010 FM5563
This operation is unable to perform.
Remarks %1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Deactivate the image browse function, and then activate it again.
CR-IR 391CL Service Manual
Appx MT 1-229
Appx MT 1-230 Event
Event Source
Description
Causes
Remedies
41029 FFCustomMsgBox
No study selected.
● Select a study and retry it.
41030 FFCustomMsgBox
Method of calling is incorrect. Un-permitted scripts have been called directly.
● Execute again following the correct start procedure.
41031 FFCustomMsgBox
An error of unknown cause occurred.
● Contact your service engineer. ❍ Press the button below to close this dialog and terminate the system.
41032 FFCustomMsgBox
Image display is disabled because specified images cannot be found.
● To exit the image viewer, press the button below.
41033 FFCustomMsgBox
Failed in initialization processing.
● Contact your service engineer. ❍ Press the button below to close this dialog and terminate the system.
41034 FFCustomMsgBox
A timeout occurred.
● Contact your service engineer. +Press the button below to close this dialog and terminate the system.
41035 FFCustomMsgBox
Failed in starting up image viewer.
● Restart the server computer and retry. Contact your service engineer if the same symptom recurs even after it has been restarted.
41036 FFCustomMsgBox
An attempt to connect to C@Rna data center resulted in a failure.
● Ensure that the network cable has been connected correctly.
41037 FFCustomMsgBox
This operation is not allowed for retrieved studies from disks.
● This operation is unable to perform.
41038 FFCustomMsgBox
Failed in obtaining case study images.
The C@Rna newly-arrived information program is not running normally, or the network may have problems. ● Confirm that the C@Rna newly-arrived information program is running.
41039 FFCustomMsgBox
Failed in obtaining anatomical drawings.
The C@Rna newly-arrived information program is not running normally, or the network may have problems. ● Confirm that the C@Rna newly-arrived information program is running.
41040 FFCustomMsgBox
[41040] A study is being performed. *Please “Complete” or “Suspend” ongoing study. >If the computer currently in use is unable to check, the study may be used by other user. >Otherwise, please restart all computers of this system.
020-221-02E 01.08.2010 FM5563
Remarks
Just as the message states.
CR-IR 391CL Service Manual
Appx MT 1-230
Appx MT 1-231 Event
Event Source
Description
Causes
Remedies
41212 FFCustomMsgBox
The disk drive used for image view purpose has not been set up properly.
41400 VwAnnotation ObjCom
File: Filename, Spot: Spot code, Code: Error code
The hard disk was full.
Delete unnecessary images.
41400 VwMsgBoxCtrl
HDD FULL.
The hard disk was full.
Delete unnecessary images.
41401 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The specified path was not found.
Check path settings.
41402 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
No medium is ready.
Set a medium in its position.
41403 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The capacity of the media targeted for copy was insufficient.
Replace the media for anyone of larger capacity.
41410 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The method return value for the delivery instruction component resulted in an error (a process other than the delivery process can be continued).
Delete unnecessary images.
42000 QAManagerCom
Arbitrary information.
Arbitrary information.
Processing can be continued
42400 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
Failed in acquiring a bitmap (replaceable).
Check that the entire bitmap is acquired.
42400 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: %2 SpotCode: %3 Can’t Get Bitmap (Processing continuation). %4 %5
A program error occurred.
Restart both the server PC and client PC
42401 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The return value for the custom message box control resulted in an error.
Nothing particular.
42402 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An error occurred when obtaining a system Check SysConfig.mdb. setup database access API value or the obtained value was illegal (replaceable).
42402 FFVwMsgBoxCtrl
ErrorCode: -2402 SubSystem: VI SourceFile: VwViewerCtrl. ctl[GetSysConfig] SpotCode: 0 SysConfig DB Access Failure (Processing continuation). VwSysDBGetValueComImgFileNameType
A program error occurred.
020-221-02E 01.08.2010 FM5563
Remarks
With the Service Utility, set the disk drive for viewing.
%1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
Restart both the server PC and client PC
CR-IR 391CL Service Manual
Appx MT 1-231
Appx MT 1-232 Event
Event Source
Description
Causes
Remedies
Remarks
42402 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: %2 SpotCode: %3 SysConfig DB Access Failure (Processing continuation). %4 %5
A program error occurred.
42403 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An error occurred when obtaining a Check LangStr.mdb. character string database access API value (replaceable).
42403 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: frmViImgFileOutput. frm[SetCaption ()] SpotCode: 316 LangStr DB Access Failure (Processing continuation). StrDBGet (46506) Ret = %2
A program error occurred.
Restart both the server PC and client PC
%1=Detailed error code %2=Detailed error code
42403 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: frmViImgFileOutput. frm[SetCaption ()] SpotCode: 303 LangStr DB Access Failure (Processing continuation). StrDBGet (46507) Ret = %2
A program error occurred.
Restart both the server PC and client PC
%1=Detailed error code %2=Detailed error code
42403 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: frmViImgFileOutput. frm[SetCaption ()] SpotCode: 303 LangStr DB Access Failure (Processing continuation). StrDBGet (46508) Ret = %2
A program error occurred.
Restart both the server PC and client PC
%1=Detailed error code %2=Detailed error code
42403 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: %2 SpotCode: %3 LangStr DB Access Failure (Processing continuation). %4 %5
A program error occurred.
Restart both the server PC and client PC
%1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
42404 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The return value for the message box database access API resulted in an error.
Check LangMsgBox.mdb.
020-221-02E 01.08.2010 FM5563
Restart both the server PC and client PC
CR-IR 391CL Service Manual
%1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
Appx MT 1-232
Appx MT 1-233 Event
Event Source
Description
Causes
Remedies
42405 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The FF32 library (FF32dll) return value is Check the registry key setting. in error (registry acquisition/setup failed). Replaceable. When the option key registry data is acquired, no error occurs even if the key is not acquired.
42405 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: %2 SpotCode: %3 FF32 Access Failure (Probably acquisition of Registry goes wrong.) %4 %5
A program error occurred.
Restart both the server PC and client PC
42406 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
No tag information was set up though it must have been set up beforehand (irreplaceable).
Nothing particular.
42407 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An error occurred when obtaining a network setup database value or obtained value was not correct (replaceable).
Check NetConfig.mdb.
42407 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: %2 SpotCode: %3 NetConfig DB Access Failure (Processing continuation). %4 %5
A program error occurred.
Restart both the server PC and client PC
42408 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The return value for the customize object was in error or illegal (replaceable).
Check Custom.adp.
42409 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
Failed in obtaining/setting an FF32 library value (replaceable).
%1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
%1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
Appx MT 1-233
Appx MT 1-234 Event 43411
Event Source QAChgPrmCtrl
Description
Causes
Remedies
Error occurred in RunWithParam () The image process was not successfully of FMImgHandCtrl. performed.
Restart the system. Contact the support center.
43510 QAChgPrmCtrl
Selected image can’t show.
Image display failed.
Restart the system. Contact the support center.
43512 FFMaCommon
Logical Program Error. %n %1 %n %2
A program error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43513 FFMaCommon
Catch Exception Error. %n %1 %n %2
An exception error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43514 FFMaCommon
Out Of Memory Error. %n %1 %n %2
Memory allocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43515 FFMaCommon
Free Memory Error. %n %1 %n %2
Memory deallocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43516 FFMaCommon
Disk Full Error. %n %1 %n %2
The built-in hard disk does not have a sufficient free space.
Delete unnecessary files to increase free disk space.
43517 FFMaCommon
DataBase Error. %n %1 %n %2
The database was not successfully operated.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43518 FFMaCommon
Debug Log OutPut. %n %1 %n %2
This is an event log output for debugging. Confirm the situation in which the error It is not generated under normal conditions. occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43520 QAChgPrmCtrl
Error occurred in ExecuteEDR () of EDRCom.
EDR computation failed.
43521 QAChgPrmCtrl
Error occurred in The EDR backup file was not successfully SetEDRProperties () of EDRCom. created.
Restart the system. Contact the support center.
43522 QAChgPrmCtrl
Error occurred in MakeEDRBackupFile () of EDRCom.
Restart the system. Contact the support center.
020-221-02E 01.08.2010 FM5563
An attempt to perform EDR property setup failed.
Remarks
Restart the system. Contact the support center.
CR-IR 391CL Service Manual
Appx MT 1-234
Appx MT 1-235 Event
Event Source
Description
Causes
Remedies
43530 QAChgPrmCtrl
Error occurred in RemoveDstbDest () of QAManagerCom.
The distribution/delivery destination was not successfully deleted.
Restart the system. Contact the support center.
43531 QAChgPrmCtrl
Error occurred in SetPrintDest () of QAManagerCom.
An attempt to change the PRINT attribute failed.
Restart the system. Contact the support center.
43532 QAChgPrmCtrl
Error occurred in SetFilingDest () of QAManagerCom.
An attempt to change the FILE attribute failed.
Restart the system. Contact the support center.
43533 QAChgPrmCtrl
Error occurred in SetDisplayDest () of QAManagerCom.
An attempt to change the DISPLAY attribute failed.
Restart the system. Contact the support center.
43534 QAChgPrmCtrl
Error occurred in AddDstbDest () of QAManagerCom.
The distribution/delivery destination was not successfully deleted.
Restart the system. Contact the support center.
43535 QAChgPrmCtrl
PixelDensity of An ImageDensityOut setting of -1 was MenuDefaultParameter is equal to detected. -1. Skip change ImageDensityOut.
43536 QAChgPrmCtrl
Selected MPM-Code hasn’t An undefined menu code was encountered Restart the system. Contact the support default parameters in some param when GetByMenu was used. center. files.
43537 QAChgPrmCtrl
FilmOrientation of The value obtained for FilmOrientation MenuDefaultParameter isn’t 0 or setting acquisition was neither 0 nor 1. 1.%nSet default 0 (LANDSCAPE).
Restart the system. Contact the support center.
Restart the system. Contact the support center.
43600 FFMaCommonImage Logical Program Error. %n %1 %n %2
A program error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43602 FFMaCommonImage Out Of Memory Error. %n %1 %n %2
Memory allocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43604 FFMaCommonImage Disk Full Error. %n %1 %n %2
The built-in hard disk does not have a sufficient free space.
Delete unnecessary files to increase free disk space.
020-221-02E 01.08.2010 FM5563
Remarks
CR-IR 391CL Service Manual
Appx MT 1-235
Appx MT 1-236 Event
Event Source
Description
Causes
Remedies
43700 FFTsCommon
Logical Program Error. %n %1 %n %2
A program error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43701 FFTsCommon
Catch Exception Error. %n %1 %n %2
An exception error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43702 FFTsCommon
Out Of Memory Error. %n %1 %n %2
Memory allocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43703 FFTsCommon
Free Memory Error. %n %1 %n %2
Memory deallocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
43704 FFTsCommon
Disk Full Error. %n %1 %n %2
The built-in hard disk does not have a sufficient free space.
Delete unnecessary files to increase free disk space.
43705 FFTsCommon
Catch DB exception. %n %1 %n %2
An exception occurred when an attempt was made to access a database.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
44005 FFCustomMsgBox
The number of annotations exceeded the display-allowable limit.
The number of annotations and markers inserted for one image on the viewer window has exceeded 32.
Perform input again after deleting inserted annotations and markers.
44016 FFCustomMsgBox
No image has been selected.
● Check the checkbox at the bottom right of the window and retry.
44023 FFCustomMsgBox
An image display could not be made because an operation is being performed.
● Close the dialog and retry.
44024 FFCustomMsgBox
A display could not be cleared because an operation is being performed.
● Close the dialog and retry.
44030 FFCustomMsgBox
Input 3 or more vertices.
020-221-02E 01.08.2010 FM5563
Remarks
This confirmation dialog is displayed at the To create a polygon, 3 or more vertices are time of insertion of a polygonal annotation required. on the viewer window when it is tried to Input 3 or more vertices. establish a polygonal shape with fewer than three apexes.
CR-IR 391CL Service Manual
Appx MT 1-236
Appx MT 1-237 Event
Event Source
44040 FFCustomMsgBox
Description
Causes
[44040] The following preset(s) will be deleted. %s
Remedies
Remarks
Nothing particular.
+Do you wish to proceed? 44041 FFCustomMsgBox
[44041] This name already exists.
Nothing particular.
+Do you wish to overwrite? 44042 FFCustomMsgBox
[44042] It cannot be changed as preset of the same name exists.
Change to an already existing preset name Change the preset name and try again. has been tried.
*Change the name. 44043 FFCustomMsgBox
[44043] Prohibited characters are included in the preset name.
The preset name to be registered or changed contains prohibited characters.
Reenter without the prohibited characters.
The preset name to be registered or changed contains more than the permitted 64 characters.
Change the input name to within 64 characters and try again.
*Retry input. 44044 FFCustomMsgBox
[44044] Input name is too long. Up to 64 characters can be entered. *Change the preset name.
44045 FFCustomMsgBox
The registerable upper limit for the selected Change the anatomical region to be [44045] Registration cannot be anatomical region has been exceeded. registered or delete a part from the preset performed for the anatomical list and try again. region selected as the registerable presets exceed the upper limit. *Too add, change the anatomical region to register or delete some from the preset list.
44046 FFCustomMsgBox
[44046] Preset name has not been entered.
No preset name has been entered.
Enter the preset name and try again.
*Enter the preset name. 44400 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
The method return value for the log save control resulted in an error.xxx
Nothing particular.
44401 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An unexpected method call (called up at an impossible timing, being possible though to continue processing).
Nothing particular.
44401 FFVwMsgBoxCtrl
ErrorCode: %1 SubSystem: VI SourceFile: %2 SpotCode: %3 An unexpected Method call. %4 %5
A program error occurred.
Restart both the server PC and client PC
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
Appx MT 1-237
Appx MT 1-238 Event
Event Source
Description
Causes
Remedies
44500 FFRtrvProcCtrl
Logical Program Error. %n %1 %n %2
A program error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
44501 FFRtrvProcCtrl
Catch Exception Error. %n %1 %n %2
An exception error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
44502 FFRtrvProcCtrl
Out Of Memory Error. %n %1 %n %2
Memory allocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
44503 FFRtrvProcCtrl
Free Memory Error. %n %1 %n %2
Memory deallocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
44504 FFRtrvProcCtrl
Disk Full Error. %n %1 %n %2
The built-in hard disk does not have a sufficient free space.
Delete unnecessary files to increase free disk space.
49000 QADataObjCom
File: Filename, Spot: Spot code, Code: Error code
CR-IR 391CL error level 2/3/9 message.
Restart the system. Contact the support center.
49000 QAImgInfoObjCom
File: Filename, Spot: Spot code, Code: Error code
CR-IR 391CL error level 2/3/9 message.
Restart the system. Contact the support center.
49000 QAImgObjCom
File: Filename, Spot: Spot code, Code: Error code
CR-IR 391CL error level 2/3/9 message.
Restart the system. Contact the support center.
49000 QAMarkerObjCom
File: Filename, Spot: Spot code, Code: Error code
CR-IR 391CL error level 2/3/9 message.
Restart the system. Contact the support center.
49000 QAMaskObjCom
File: Filename, Spot: Spot code, Code: Error code
CR-IR 391CL error level 2/3/9 message.
Restart the system. Contact the support center.
49000 QAChgPrmCtrl
Error level is Warning (level2), Information or Logical Error.
A parameter error (internal system error) occurred.
Restart. If the same symptom recurs, perform a reinstallation.
49003 QAManagerCom
Error in NetDB Library.
An error attributable to a program fault (an Restart the system. Contact the support error that could not occur in the market) center. occurred. An unexpected return value was delivered from a method. Memory allocation failed. Windows resource acquisition failed. An abnormal return from a Windows API.
An error highly attributable to a program fault (an error that could not occur in the market) occurred. An unexpected return value was delivered from a method. Memory allocation failed. Windows resource acquisition failed. An abnormal return from a Windows API.
Restart both the server application and %1=Error Code: The code that uniquely client application. If the same error recurs, identifies an error. perform a reinstallation. If the reinstallation %2=Subsystem: The subsystem where an does not help, confirm the situation in error occurred. which the error occurred, and submit the %3=Source File: The program file where event log to the manufacturer. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
49004 QAManagerCom
Error in ImageDB Access.
Program error.
Restart the system. Contact the support center.
49005 QAManagerCom
Error in FFCreateUID.
Program error.
Restart the system. Contact the support center.
49006 QAManagerCom
Error in FFCreateStudyUID.
Program error.
Restart the system. Contact the support center.
49007 QAManagerCom
Error in ImgDelivery.
Program error.
Restart the system. Contact the support center.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart. If the same symptom recurs, perform a reinstallation.
49101 QAManagerCom
Error about StudyInstanceUIDType (0007,F244).
Program error.
Restart the system. Contact the support center.
49102 QAManagerCom
Error about SeriesInstanceUIDType (0007,F245).
Program error.
Restart the system. Contact the support center.
49103 QAManagerCom
Error about StudyInstanceUID (0020,000D).
Program error.
Restart the system. Contact the support center.
49104 QAManagerCom
Error about SeriesInstanceUID (0020,000E).
Program error.
Restart the system. Contact the support center.
49105 QAManagerCom
Error about ImageUID (0009,XX05).
Program error.
Restart the system. Contact the support center.
49106 QAManagerCom
Error about FilmUID (0009,XX0C). Program error.
Restart the system. Contact the support center.
49107 QAManagerCom
Error about MultiFrameUID (0007,F200).
Program error.
Restart the system. Contact the support center.
49108 QAManagerCom
Error about ID (0007,F001).
Program error.
Restart the system. Contact the support center.
49151 QAManagerCom
Error about QAFlag.
Program error.
Restart the system. Contact the support center.
49152 QAManagerCom
Error about Lock (0007,F020).
Program error.
Restart the system. Contact the support center.
49301 QAManagerCom
Error about Patient’s Name (0010,0010).
Program error.
Restart the system. Contact the support center.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-240
Appx MT 1-241 Event
Event Source
Description
Causes
Remedies
49302 QAManagerCom
Error about Patient ID (0010,0020).
Program error.
Restart the system. Contact the support center.
49303 QAManagerCom
Error about Patient’s Birth Date (0010,0030).
Program error.
Restart the system. Contact the support center.
49304 QAManagerCom
Error about Patient’s Sex (0010,0040).
Program error.
Restart the system. Contact the support center.
49305 QAManagerCom
Error about Accession Number (0008,0050).
Program error.
Restart the system. Contact the support center.
49306 QAManagerCom
Error about DepartmentName (0009,XX91).
Program error.
Restart the system. Contact the support center.
49307 QAManagerCom
Error about DepartmentName (0009,XX92).
Program error.
Restart the system. Contact the support center.
49308 QAManagerCom
Error about InspectNumber (0021,XX20).
Program error.
Restart the system. Contact the support center.
49309 QAManagerCom
Error about Modality (0008,0060). Program error.
Restart the system. Contact the support center.
49310 QAManagerCom
Error about StudyDate (0008,0020).
Program error.
Restart the system. Contact the support center.
49311
Error about RequestingService (0032,1033).
Program error.
Restart the system. Contact the support center.
49312 QAManagerCom
Error about OrderNumber (0007,F240).
Program error.
Restart the system. Contact the support center.
49313 QAManagerCom
Error about DepartmentCode (0007,F246).
Program error.
Restart the system. Contact the support center.
49314 QAManagerCom
Error about StudyID (0020,0010).
Program error.
Restart the system. Contact the support center.
49315 QAManagerCom
Error about RequestedProcedureID (0040,1001).
Program error.
Restart the system. Contact the support center.
49400 VwAnnotation ObjCom
[File name][Function name][Error code]Comment
An FF32 library (FF32.dll) return value error (inreplaceable).
Restart the system. Contact the support center.
49400 VwMsgBoxCtrl
[File name][Function name][Error code]Comment
An FF32 library (FF32.dll) return value error (inreplaceable).
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49501 QAManagerCom
Error about FilmOutFormat (50F1,XX10).
Program error.
Restart the system. Contact the support center.
49501 FFMaRetrieve
Catch Exception Error. %n %1 %n %2
An exception error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49502 QAManagerCom
Error about ImagePosition (2020,0010).
Program error.
Restart the system. Contact the support center.
49502 FFMaRetrieve
Out Of Memory Error. %n %1 %n %2
Memory allocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49503 QAManagerCom
Error about NumberOfCopies (2000,0010).
Program error.
Restart the system. Contact the support center.
49503 FFMaRetrieve
Free Memory Error. %n %1 %n %2
Memory deallocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49504 QAManagerCom
Error about NumberOfImages (2011,XXA0).
Program error.
Restart the system. Contact the support center.
49504 FFMaRetrieve
Disk Full Error. %n %1 %n %2
The built-in hard disk does not have a sufficient free space.
Delete unnecessary files to increase free disk space.
49505 QAManagerCom
Error about Status (0007,F030).
Program error.
Restart the system. Contact the support center.
49510 FFMaRetrieve
Retrieve Process Start. %n %1 %n %2
This is the information for event log analysis.
This is the acquisition subsystem startup time information for event log analysis.
49511
Retrieve Process End. %n %1 %n %2
This is the information for event log analysis.
This is the acquisition subsystem startup time information for event log analysis.
FFMaRetrieve
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks %1=Error code %2=Source, Function name %3=Spot code %4=Detailed code of an error %5=Details of an error
Appx MT 1-245
Appx MT 1-246 Event
Event Source
Description
Causes
Remedies
49540 FFMaRetrieve
Process Communication Error. %n %1 %n %2
An error occurred in the communication control.
The startup process was improperly performed, or the preceding process was not normally ended. If the same error recurs, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49541 FFMaRetrieve
Retrieve Process Exists. %n %1 %n %2
An attempt was made to run more than one acquisition process. It is conceivable that the preceding process was not normally ended.
The startup process was improperly performed, or the preceding process was not normally ended. If the same error recurs, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49542 FFMaRetrieve
Cannot Get NetWork Setting. %n %1 %n %2
The network settings for the local equipment could not be acquired.
With the Service Utility, check the network settings for the local equipment.
49543 FFMaRetrieve
Image is Already Exists in ImageDB. %n %1 %n %2
The input image was not stored because it Confirm the situation in which the error was the same as a stored one. occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49544 FFMaRetrieve
File Error. %n %1 %n %2
An attempt to access a file failed.
Increase the amount of free space by installing an additional hard disk or by deleting unnecessary files. If it does not help, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49545 FFMaRetrieve
NetWork Error. %n %1 %n %2
A network error occurred.
Check the network connection to the transmitting end. If the network connection is normal, the timeout time might be too short. Increase the timeout time setting for network setup.
49546 FFMaRetrieve
Cannot Get NetWork Setting. %n %1 %n %2
Network settings cannot be acquired.
49547 FFMaRetrieve
DICOM Retrieve Timeout. %n %1 %n %2
A timeout occurred.
49548 FFMaRetrieve
DICOM Retrieve is Not Able to Use Now. %n %1 %n %2
The function for acquiring an image from a The setting for DICOM acquisition is not DICOM device is not available. adequate. Check the network settings.
49549 FFMaRetrieve
Processing Image is Deleted. %n %1 %n %2
Processing is disabled because the image was deleted.
020-221-02E 01.08.2010 FM5563
Remarks
Check the connection to the acquisition destination server and then try again to achieve acquisition. It the same error recurs, increase the acquisition timeout setting.
CR-IR 391CL Service Manual
Appx MT 1-246
Appx MT 1-247 Event
Event Source
Description
Causes
Remedies
49550 FFMaRetrieve
Integration Warning in DataBase. %n %1 %n %2
The database is inconsistent.
49551 FFMaRetrieve
DICOM Data Waring. %n %1 %n %2
An image acquisition request for a DICOM device is generated.
49552 FFMaRetrieve
Local Retrieve Warning. %n %1 %n %2
A request for acquiring an image within the This does not constitute a failure. local equipment is generated.
This does not constitute a failure. SH images are not supported.
49554 FFMaRetrieve
Image is Already Exists in ImageDB. %n %1 %n %2
The entered image is the same as that is stored in the local equipment.
This does not constitute a failure. The displayed information merely indicates that the same image exists.
49555 FFMaRetrieve
Retrieve Warnnig. %n %1 %n %2
An improper operation might have been performed during an acquisition process.
This does not constitute a failure.
49573 FFCustomMsgBox
[49573] Study data import was canceled.
As the system is terminating, the study input sent from the DICOM device was canceled.
Retry the operation after the system has been started.
As the study input is being modified or executed, the study input was canceled.
Retry the operation. If the problem is not resolved, restart the server application and client application.
*The system is being terminated. Input of the study transmitted from DICOM Device was canceled. *Re-transmit the study from DICOM Device after the system has been started. 49575 FFCustomMsgBox
[49575] The input study is either being modified or executed. *The input study is either being modified or executed. Input of the study was canceled. *Re-transmit the study from DICOM Device after a while.
This does not constitute a failure.
49700 FFMaSetting
Logical Program Error. %n %1 %n %2
A program error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49701 FFMaSetting
Catch Exception Error. %n %1 %n %2
An exception error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
020-221-02E 01.08.2010 FM5563
Remarks
CR-IR 391CL Service Manual
Appx MT 1-247
Appx MT 1-248 Event
Event Source
Description
Causes
Remedies
49702 FFMaSetting
Out Of Memory Error. %n %1 %n %2
Memory allocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49703 FFMaSetting
Free Memory Error. %n %1 %n %2
Memory deallocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49704 FFMaSetting
Disk Full Error. %n %1 %n %2
The built-in hard disk does not have a sufficient free space.
Delete unnecessary files to increase free disk space.
49740 FFMaSetting
Variant Type Invalid. %n %1 %n %2
The VARIANT data that is set for property setup is null, is not an array, or is of an incorrect array element type. It is highly probable that the program is faulty.
Obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49741 FFMaSetting
Invalid Variant Element Count. %n The VARIANT data that is set for property Obtain the maintenance log with the %1 %n %2 setup has an incorrect array element count. Backup Utility, and send the maintenance log and an error report to the manufacturer. It is highly probable that the program is faulty.
49742 FFMaSetting
Get Recordset Failed. %n %1 %n %2
An abnormal return value was delivered from the record set acquisition common module. The SQL server is abnormal.
Check whether the SQL server is running. If it is running, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49743 FFMaSetting
Get Connect String Failed. %n %1 %n %2
The setting information was not successfully acquired. This error is highly attributable to improper environment settings.
Perform a reinstallation. If the same error recurs after the reinstallation, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49744 FFMaSetting
Open Recordset Failed. %n %1 %n %2
An error occurred when an attempt was made to acquire a record set from a database. The SQL server is abnormal.
Check whether the SQL server is running. If it is running, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49745 FFMaSetting
No Record Found In BodyParts. %n %1 %n %2
No data was found in the anatomical region Perform a reinstallation. If the reinstallation LoadInitialView code table. The database might be faulty. does not help, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-248
Appx MT 1-249 Event
Event Source
Description
Causes
Remedies
Remarks
49746 FFMaSetting
Convert to String Failed. %n %1 %n %2
An abnormality occurred during character string conversion. The database might be faulty.
49747 FFMaSetting
Address Parameter Imvalid. %n %1 %n %2
An error occurred when an attempt was Obtain the maintenance log with the made to return a property value. It is highly Backup Utility, and send the maintenance probable that the program is faulty. log and an error report to the manufacturer.
49748 FFMaSetting
PartsView Associated With Specified PartsCode Not Found. %n %1 %n %2
Obtain the maintenance log with the GetInitialViewByBPE No data was found in the initial display setup table for various anatomical regions. Backup Utility, and send the maintenance This error is highly attributable to a log and an error report to the manufacturer. program fault.
49749 FFMaSetting
No Record Found In InitView. %n %1 %n %2
No data was found in the initial display setup table. The database might be faulty.
49750 FFMaSetting
No Record Found In StudyWndPtn. %n %1 %n %2
No data was found in the study window Perform a reinstallation. If the reinstallation LoadInitialView pattern setup table. The database might be does not help, confirm the situation in faulty. which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49752 FFMaSetting
No Record Found In PartsView. %n %1 %n %2
No data was found in the initial display Perform a reinstallation. If the reinstallation LoadInitialView setup table for various anatomical regions. does not help, confirm the situation in The database might be faulty. which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49753 FFMaSetting
No Record Found In PartsOrder. %n %1 %n %2
No data was found in the anatomical region Perform a reinstallation. If the reinstallation LoadInitialView sequence setup table. The database might does not help, confirm the situation in be faulty. which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49754 FFMaSetting
No Record Found In ExposureMenu. %n %1 %n %2
The exposure menu table data for the Obtain the maintenance log with the ReadExposeMenuOrder specified anatomical region was not found. Backup Utility, and send the maintenance This error is highly attributable to a log and an error report to the manufacturer. program fault.
49756 FFMaSetting
No Record Found In CadViewOrder. %n %1 %n %2
No data was found in the CAD sequence setup table. The database might be faulty.
020-221-02E 01.08.2010 FM5563
Perform a reinstallation. If the reinstallation GetCadAllItem, GetStudyBarItem does not help, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
Perform a reinstallation. If the reinstallation LoadInitialView does not help, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
Perform a reinstallation. If the reinstallation LoadMammoCad does not help, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-249
Appx MT 1-250 Event
Event Source
Description
Causes
Remedies
Remarks
49757 FFMaSetting
No Record Found In MammoCadView. %n %1 %n %2
No data was found in the CAD setup table. Perform a reinstallation. If the reinstallation LoadMammoCad The database might be faulty. does not help, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49758 FFMaSetting
Overlay Item Associated With Specified Location And ImageType Not Found. %n %1 %n %2
A warning message indicating that the image information display item table data for the specified conditions was not found. The database might be faulty.
49759 FFMaSetting
Preset Parameter Associated With Specified PresetID Or PartsCode Not Found. %n %1 %n %2
The preset parameter data for the specified Obtain the maintenance log with the ReadPresetParam, WritePresetParam conditions was not found. Backup Utility, and send the maintenance This error is highly attributable to a log and an error report to the manufacturer. program fault.
49760 FFMaSetting
CAD Parameter Associated With The image processing parameter data for Specified Purpose Not Found. %n the specified conditions was not found. %1 %n %2 This error is highly attributable to a program fault.
Obtain the maintenance log with the ReadCadParam Backup Utility, and send the maintenance log and an error report to the manufacturer.
49761 FFMaSetting
Specified MPM Code Invalid. %n %1 %n %2
The specified MPM code could not be converted to an anatomical region code. This error is highly attributable to a faulty program.
Obtain the maintenance log with the SavePresetParam, MpmToPartsCode Backup Utility, and send the maintenance log and an error report to the manufacturer.
49762 FFMaSetting
Specified Preset Name Not Exist. %n %1 %n %2
An attempt was made to update a nonexistent parameter preset name. This error is highly attributable to a faulty program.
ReadPresetParamName Obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49763 FFMaSetting
Specified Preset Name Already Exist. %n %1 %n %2
An attempt was made to add or switch to an existing parameter preset name. This error is highly attributable to a program fault.
Obtain the maintenance log with the Insert, Rename, SavePresetParam Backup Utility, and send the maintenance log and an error report to the manufacturer.
49764 FFMaSetting
No Record Found In StudyBarItem. %n %1 %n %2
No data was found in the study window display item table. The database might be faulty.
Perform a reinstallation. If the reinstallation LoadStudyBarItem does not help, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49765 FFMaSetting
No Record Found In OverlayItem. No data was found in the image information Perform a reinstallation. If the reinstallation LoadOverlayItem %n display item table. does not help, confirm the situation in %1 %n %2 The database might be faulty. which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
020-221-02E 01.08.2010 FM5563
Perform a reinstallation. If the reinstallation GetImageInfoItemLT, GetImageInfoItemRT, does not help, confirm the situation in GetImageInfoItemLB, GetImageInfoItemRT which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-250
Appx MT 1-251 Event
Event Source
Description
Causes
Remedies
Remarks
49766 FFMaSetting
Parameter Range Invalid. %n %1 %n %2
The argument value passed to the method Obtain the maintenance log with the was out of range. It is highly probable that Backup Utility, and send the maintenance the program is faulty. log and an error report to the manufacturer.
49767 FFMaSetting
No Record Found In CadSensitivity. %n %1 %n %2
No data was found in the CAD target menu. The database might be faulty.
49768 FFMaSetting
No Record Found In ImageWndPtn. %n %1 %n %2
The data was not found in the image window pattern setup table. The database might be faulty.
LoadInitialView
49769 FFMaSetting
ADO Open Connection Failed. %n An attempt to connect the database failed. %1 %n %2 The database is abnormal.
Check whether the SQL server is running. FinalConstruct If it is running, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49770 FFMaSetting
ADO Close Connection Failed. %n %1 %n %2
An attempt to disconnect the database failed. This problem is attributable to a database abnormality or a program error.
Check whether the SQL server is running. FinalRelease If it is running, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49771 FFMaSetting
Get Property Failed. %n %1 %n %2
The VARIANT data was not successfully referenced.
Check the amount of memory used by the system. If there is no problem with memory use, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49772 FFMaSetting
SafeArray Operation Failed. %n %1 %n %2
The VARIANT data array conversion process was not successfully performed.
Check the amount of memory used by the CopyVectorToVariant, system. If there is no problem with memory CopyVariantToVector use, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49773 FFMaSetting
Put Property Failed. %n %1 %n %2
The VARIANT data was not successfully set.
Check the amount of memory used by the system. If there is no problem with memory use, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
020-221-02E 01.08.2010 FM5563
Perform a reinstallation. If the reinstallation GetCadSensitivity does not help, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-251
Appx MT 1-252 Event
Event Source
Description
Causes
Remedies
Remarks
49774 FFMaSetting
DB Access Failed. %n %1 %n %2
The database was not successfully operated. The database is abnormal.
Check whether the SQL server is running. If it is running, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49775 FFMaSetting
Image Param Control Failed. %n %1 %n %2
An error occurred in an image processing parameter management component. This error is highly attributable to improper environment setup.
Perform a reinstallation. If the same error LoadPresetParam recurs after the reinstallation, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49776 FFMaSetting
Update Data Invalid. %n %1 %n %2
The VARIANT data used to update the database was improperly sized. It is highly probable that the program is faulty.
Obtain the maintenance log with the WritePartsOrder, WriteExposeMenuOrder Backup Utility, and send the maintenance log and an error report to the manufacturer.
49777 FFMaSetting
No Data In Recordset. %n %1 %n %2
This is a warning message indicating that a There is no particular problem. database record could not be acquired.
49778 FFMaSetting
Get Field Information Failed. %n %1 %n %2
The field information about a record set was not successfully acquired. This event is attributable to an insufficient memory or program error.
If there is no problem with the amount of GetFieldInfo memory use, confirm the situation in which the event occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an event report to the manufacturer.
49779 FFMaSetting
Convert to PartsCode from MPM Failed. %n %1 %n %2
An error was returned from the MPM code conversion module. It is highly probable that the program is faulty.
Obtain the maintenance log with the ReadPresetParamName Backup Utility, and send the maintenance log and an error report to the manufacturer.
49780 FFMaSetting
Get Language from SysConfig Failed. %n %1 %n %2
An error was returned from the language acquisition (GetLanguage) module. The database might be faulty.
Perform a reinstallation. If the reinstallation CIPartsMenuOrder::FinalConstruct does not help, confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
49781 FFMaSetting
Set Value Range Invalid. %n %1 %n %2
This event will not be displayed in the event log.
This event will not be displayed in the event log.
Setup dialog
49782 FFMaSetting
Set Value Type Invalid. %n %1 %n %2
This event will not be displayed in the event log.
This event will not be displayed in the event log.
Setup dialog
49783 FFMaSetting
CAD Display Image Total Over Max. %n %1 %n %2
This event will not be displayed in the event log.
This event will not be displayed in the event log.
Setup dialog
49784 FFMaSetting
Infomation Setting Size Warning. %n %1 %n %2
The image information area setup size is improper. The information cannot be entirely displayed because a small area is set from the Service Utility.
Check whether an improper display area is UserUtility: Incidental information set from the Service Utility.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
GetRecordset
Appx MT 1-252
Appx MT 1-253 Event
Event Source
Description
Causes
Remedies
49900 FFMaRetrieve
Create DDOFile Error.
DDO file generation failed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49901 FFMaRetrieve
Write DDOFile Error.
A write process was not successfully performed for a DDO file.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49902 FFMaRetrieve
Get ImageInfo Error.
Image information was not successfully acquired.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49903 FFMaRetrieve
Open XMLFile Error.
An XML file was not successfully opened.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49904 FFMaRetrieve
Close XMLFile Error.
An XML file was not successfully closed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49905 FFMaRetrieve
Parse XMLFile Error.
An XML file was not successfully parsed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49906 FFMaRetrieve
XMLFile Not Correct.
XML file information is illegal.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-253
Appx MT 1-254 Event
Event Source
Description
Causes
Remedies
49907 FFMaRetrieve
Create UID Error.
An UID number issuance process failed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49908 FFMaRetrieve
Create Instance Error.
The instance generation process was not successfully performed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49909 FFMaRetrieve
Get SystemInfo Error.
The system setting information was not successfully acquired.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49910 FFMaRetrieve
Input DDOFile Error.
A DDO file addition process failed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
49911
Program Error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
FFMaRetrieve
49999 ViClientInfoAccess
ErrorCode:%1%nSubSystem:%2 An exception error occurred. %nSourceFile:%3%nSpotCode:% 4%n Comment
Restart. If the same symptom recurs, perform a reinstallation.
50000 FFOutImgPrc
Initialize Error.%n%1
An abnormality was encountered during initialization.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50001 FFCustomMsgBox
Failed in initialization processing.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-254
Appx MT 1-255 Event
Event Source
Description
Causes
Remedies
50001 FFOUTPUT
Initialize Error.%n[%1]
Initialization process error. Output control was not exercised. The error check method was not successfully called. A certain other program error occurred.
Restart. If the same symptom frequently occurs, perform a reinstallation.
50001 FFOutImgPrc
DB Connect Error.%n%1
An abnormality occurred in the connection to a database.
Check whether the SQL service manager is normally operating. If the symptom occurs while the SQL service manager is normally operating, initialize the image database (the entire image data is then deleted).
50001 Spooler
Initialize Error.%n[%1]
Initialization process error. Output control was not exercised. The error check method was not successfully called. A certain other program error occurred.
Restart. If the same symptom frequently occurs, perform a reinstallation.
50002 FFCustomMsgBox
Failed in output process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
50002 FFOUTPUT
State Change Error.%n[%1]
State change notification process error. Restart. An output destination was not successfully registered. A state change notification call was not successful. Other program error. Line establishment message transmission error Line abnormality message transmission error
50002 FFOutImgPrc
DB Infomation Error.%n%1
The database information is abnormal.
50002 Spooler
State Change Error.%n[%1]
Restart. State change notification process error. An output destination was not successfully registered. A state change notification call was not successful. Other program error. Line establishment message transmission error Line abnormality message transmission error
50003 FFCustomMsgBox
Failed in output process.
The system was unstable.
50003 FFOUTPUT
Routine Change Error.%n[%1]
50003 FFOutImgPrc
System Error.%n%1
020-221-02E 01.08.2010 FM5563
Output section container.
Output section container.
Output section container.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database. Output section container.
Restart. If the same symptom recurs, perform a reinstallation. Restart.
The system was unstable.
Remarks
Output section container.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
CR-IR 391CL Service Manual
Appx MT 1-255
Appx MT 1-256 Event
Event Source
Description
Causes
Remedies
50003 Spooler
Routine Change Error.%n[%1]
50004 FFCustomMsgBox
Failed in output process.
The system was unstable.
50004 FFOUTPUT
Spool Error.%n[%1]
Spool process error. Restart. The spool request call was not successfully made. The reoutput request was not successfully made. The study termination notification was not successfully made. The spool request response status was invalid. An unknown program error occurred.
50004 FFOutImgPrc
I/F Timing Error.%n%1
An interface abnormality was encountered. Restart.
50004 Spooler
Spool Error.%n[%1]
Spool process error. Restart. The spool request call was not successfully made. The reoutput request was not successfully made. The study termination notification was not successfully made. The spool request response status was invalid. An unknown program error occurred.
50005 FFCustomMsgBox
Failed in output process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
50005 FFOUTPUT
ExeOutput Error.%n[%1]
Forced-output process error. The spool forced output request call was not successfully made. The queue forced output response message was not successfully transmitted. An unknown program error occurred.
Restart.
50005 FFOutImgPrc
CreateFileMapping Error.%n%1
File mapping was unachievable.
Restart.
50005 Spooler
ExeOutput Error.%n[%1]
Forced-output process error. The spool forced output request call was not successfully made. The queue forced output response message was not successfully transmitted. An unknown program error occurred.
Restart.
50006 FFCustomMsgBox
Failed in output process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
Restart.
Remarks Output section container.
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Output section container.
Output section container.
Output section container.
Output section container.
Appx MT 1-256
Appx MT 1-257 Event
Event Source
Description
Causes
Remedies
50006 FFOUTPUT
Image Proc Error.%n[%1]
Image processing error. The image processing request call was not successfully made. The image processing setup completion call was not successfully made. The image processing completion notification call was not successfully made. The image processing job acquisition request was not successfully made. An unknown program error occurred.
Restart.
50006 FFOutImgPrc
File Open Error.%n%1
The file could not be opened.
Check the file.
50006 Spooler
Utility Request Error.%n[%1]
A utility transition process error occurred. A utility transition request call failed. A utility transition response message was not successfully transmitted. Other program error.
50007 FFCustomMsgBox
Failed in terminating process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
50007 FFOUTPUT
Output Proc Error.%n[%1]
Output processing error. The output destination information was not successfully acquired. The output request call was not successfully made. The output completion notification was not successfully made. An unknown program error occurred.
Restart.
50007 FFOutImgPrc
File Read/Write Error.%n%1
The file was not successfully written/read. The disk might be faulty.
If the error occurs frequently, replace the disk or take other remedial action.
50007 Spooler
Terminate Error.%n[%1]
Termination process error. Other program error.
Restart.
50008 FFCustomMsgBox
Failed in image processing for output.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
50008 FFOUTPUT
Commit Proc Error.%n[%1]
Commitment processing error. The commitment destination information was not successfully acquired. The commitment request call was not successfully made. The commitment completion notification was not successfully made. An unknown program error occurred.
Restart.
50008 FFOutImgPrc
CreateDispatch Error.%n%1
The control was not successfully initialized. Check that the control is registered.
020-221-02E 01.08.2010 FM5563
Remarks Output section container.
Output section container.
CR-IR 391CL Service Manual
Output section container.
Output section container.
Output section container.
Appx MT 1-257
Appx MT 1-258 Event
Event Source
Description
Causes
Remedies
Remarks
50008 Spooler
Image Proc Error.%n[%1]
Image process error. Restart. An image process request was not successfully called. An image process setup completion call was not successfully made. An image process completion notification was not successfully called. An image process job acquisition request was not successfully issued. Other program error.
50009 FFCustomMsgBox
Failed in output process.
The system was unstable.
Restart. If the same symptom recurs, perform a reinstallation.
50009 FFOUTPUT
Queue Resume Error.%n[%1]
Queue resumption process error. The queue resumption request call was not successfully made. The queue resumption response message was not successfully transmitted. An unknown program error occurred.
Restart.
50009 FFOutImgPrc
Memory Get Error.%n%1
The system was abnormal (memory allocation was not achieved).
Restart.
50009 Spooler
Output Proc Error.%n[%1]
Output processing error. The output destination information was not successfully acquired. The output request call was not successfully made. The output completion notification was not successfully made. An unknown program error occurred.
Restart.
Output section container.
50010 FFOUTPUT
Queue Delete Error.%n[%1]
Queue resumption process error. A queue resumption request was not successfully called. A queue resumption response message was not successfully transmitted. Other program error.
Restart.
Output section container.
50010 FFOutImgPrc
Memory (DDO) Get Error.%n%1
The system was abnormal (memory allocation was not achieved).
Restart.
50010 Spooler
Queue Resume Error.%n[%1]
Queue resumption process error. The queue resumption request call was not successfully made. The queue resumption response message was not successfully transmitted. An unknown program error occurred.
Restart.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Output section container.
Output section container.
Output section container.
Appx MT 1-258
Appx MT 1-259 Event
Event Source
Description
Causes
Remedies
Remarks
50011
FFOUTPUT
Unit Suspend Error.%n[%1]
Equipment output suspension process error. The equipment output suspension request call was not successfully made. The equipment output suspension response message was not successfully transmitted. An unknown program error occurred.
Restart.
50011
FFOutImgPrc
Memory (VR) Get Error.%n%1
The system was abnormal (memory allocation was not achieved).
Restart.
50011
Spooler
Queue Delete Error.%n[%1]
Queue resumption process error. A queue resumption request was not successfully called. A queue resumption response message was not successfully transmitted. Other program error.
Restart.
Output section container.
50012 FFOUTPUT
Unit Resume Error.%n[%1]
Equipment output resumption error. Restart. The equipment output resumption request call was not successfully made. The equipment output resumption response message was not successfully transmitted. An unknown program error occurred.
Output section container.
50012 FFOutImgPrc
Dicom Data Object Error.%n%1
The Dicom Data Object is abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50012 Spooler
Unit Suspend Error.%n[%1]
Equipment output suspension process error. The equipment output suspension request call was not successfully made. The equipment output suspension response message was not successfully transmitted. An unknown program error occurred.
Restart.
50013 FFOUTPUT
Priority Change Error.%n[%1]
Queue priority change error.
50013 FFOutImgPrc
Dicom Data Object No Data.%n%1
No information was found in the Dicom Data Object.
50013 Spooler
Unit Resume Error.%n[%1]
Restart. Equipment output resumption error. The equipment output resumption request call was not successfully made. The equipment output resumption response message was not successfully transmitted. An unknown program error occurred.
020-221-02E 01.08.2010 FM5563
Output section container.
Output section container.
Output section container. Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
CR-IR 391CL Service Manual
Output section container.
Appx MT 1-259
Appx MT 1-260 Event
Event Source
Description
Causes
Remedies
50014 FFOUTPUT
Utility Request Error.%n[%1]
A utility transition process error occurred. A utility transition request call failed. A utility transition response message was not successfully transmitted. Other program error.
50015 FFOUTPUT
Terminate Error.%n[%1]
Termination process error. Other program error.
Restart.
50020 FFOutImgPrc
Data Error.%n%1
A data abnormality was encountered.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50021 FFOutImgPrc
Output Job DB Error.%n%1
The output database is abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50022 FFOutImgPrc
Memory Over.%n%1
A memory region error occurred.
Restart.
50030 FFOutImgPrc
OutImgPrc Error.%n%1
An abnormality occurred.
Restart.
50100 FFOutImgPrc
IFormatCom Error.%n%1
The format calculation object was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50100 Spooler
Spooler Error.%n%1
Common error message. Queue information class related message. An output job file was not successfully accessed. Output job information was not successfully accessed. Film information was not successfully acquired. Information was not successfully acquired. The job status was not successfully acquired (program error). Job information was not successfully freed. Unit information class related message. Unit information was not successfully freed. Spooler class related message. The film count was not successfully checked. The image count/image information area was not successfully acquired. Unit information was not successfully acquired. Other program error
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50100 FFCustomMsgBox
Disk storing failed.
50101 FFOutImgPrc
IRawMakeCom Error.%n%1
020-221-02E 01.08.2010 FM5563
Remarks Output section container.
Output section container.
Spooler
● Contact your service engineer. A RAW data creation object was abnormal. Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
CR-IR 391CL Service Manual
Appx MT 1-260
Appx MT 1-261 Event
Event Source
Description
Causes
Remedies
50101 Spooler
RunProc Error.%n%1
50101 FFCustomMsgBox
Disk storing failed.
50102 FFOutImgPrc
FFNetDB Error.%n%1
An abnormality occurred at the time of network setup data acquisition. (It is conceivable that the network setup database was abnormal.)
50102 Spooler
OutputRegisterProc Error.%n%1
Output destination registration process Restart. If the same symptom frequently error. occurs, perform a reinstallation and then The spooler control state was abnormal. initialize the image database. An illegal parameter was encountered. An output destination registration request message was not successfully issued. An output destination was not successfully registered. Other program error.
50102 FFCustomMsgBox
Disk storing failed.
50103 FFOutImgPrc
IImgJpegCtrl Error.%n%1
The decompression object was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50103 Spooler
StateChangeProc Error.%n%1
Local printer/Dicom printer state change notification process error. The spooler control state was abnormal. An illegal parameter was encountered. A printer state change notification message was not successfully issued. The unit status was not successfully acquired. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50104 FFOutImgPrc
IFMImgSkGpCtrl Error.%n%1
The normalization process object was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50104 Spooler
ErrorCheckProc Error.%n%1
Data integrity check process error. The spooler control state was abnormal. A data integrity check request message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50104 FFCustomMsgBox
Disk storing failed.
020-221-02E 01.08.2010 FM5563
Initialization process error. The spooler control state was abnormal. A spool start process was in error. A database connection was not successfully closed. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Remarks Spooler
● Contact your service engineer. Restart. If the same symptom frequently occurs, perform a reinstallation. Spooler
● Contact your service engineer.
Spooler
Spooler
● Contact your service engineer.
CR-IR 391CL Service Manual
Appx MT 1-261
Appx MT 1-262 Event
Event Source
Description
Causes
Remedies
50105 FFOutImgPrc
IFMImgVRSCtrl Error.%n%1
The zoom object (VRS method) was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50105 Spooler
RestoreJob Error.%n%1
Job restoration error. The spooler control state was abnormal. An unprocessed job restoration request message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50106 FFOutImgPrc
IRotateCom Error.%n%1
The rotation object was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50106 Spooler
SpoolProc Error.%n%1
Spool process error. Restart. If the same symptom frequently The spooler control state was abnormal. occurs, perform a reinstallation and then initialize the image database. A parameter error occurred. A spool request message was not successfully issued. DDO file information was not successfully acquired. Other program error.
50106 FFCustomMsgBox
Disk storing failed.
50107 FFOutImgPrc
IFMImgParamCtrl Error.%n%1
The image process management parameter object was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50107 Spooler
ReoutputProc Error.%n%1
Reoutput start process error. The spooler control state was abnormal. An illegal parameter was encountered. A reoutput start message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50108 FFOutImgPrc
IFMImgHandCtrl Error.%n%1
An abnormal CR image processing object was encountered.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50108 Spooler
StudyReqEndProc Error.%n%1
Study termination request processing error. Restart. If the same symptom frequently occurs, perform a reinstallation and then Spooler control status error. initialize the image database. Illegal parameters. Failed in issuing study termination request message. Other program errors.
50109 FFOutImgPrc
IFMImgFCmpCtrl Error.%n%1
FCR compression (compression/ decompression (Fuji’s unique method)) was abnormal.
020-221-02E 01.08.2010 FM5563
Remarks
Spooler
Spooler
● Contact your service engineer.
Spooler
Spooler
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
CR-IR 391CL Service Manual
Appx MT 1-262
Appx MT 1-263 Event
Event Source
Description
Causes
Remedies
50109 Spooler
ExeOutputJob Error.%n%1
Forced output request process error. Restart. If the same symptom frequently The spooler control state was abnormal. occurs, perform a reinstallation and then initialize the image database. An illegal parameter was encountered. A forced output request message was not successfully issued. The requested output image data did not exist. Other program error.
50110
FFOutImgPrc
IDataToPrintCom Error.%n%1
Data conversion (for DICOM) was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50110
Spooler
GetImageProcJob Error.%n%1
Image processing job acquisition process error. The spooler control state was abnormal. An image processing job acquisition request message was not successfully issued. Data was not databased. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50111
FFOutImgPrc
IDataToStorageCom Error.%n%1
Data conversion (for DICOM Storage) was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50111
Spooler
SetImageProcComplete Error.%n%1
Image processing completion notification Restart. If the same symptom frequently process error. occurs, perform a reinstallation and then The spooler control state was abnormal. initialize the image database. An illegal parameter was encountered. An image processing completion notification message was not successfully issued. Other program error.
50112
FFOutImgPrc
IFMImgMoireCtrl Error.%n%1
Moire removal failed.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50112
Spooler
GetOutputProcJob Error.%n%1
Output job acquisition response process error. The spooler control state was abnormal. An output job acquisition response message was not successfully issued. Data was not databased. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50113
FFOutImgPrc
IFilmCharMakeCom Error.%n%1
The film annotation character generation object was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks Spooler
Spooler
Spooler
Spooler
Appx MT 1-263
Appx MT 1-264 Event
Event Source
Description
Causes
Remedies
Remarks
50113
Spooler
SetOutputProcComplete Error.%n%1
50113
FFCustomMsgBox
Disk storing failed.
50114
FFOutImgPrc
MaskProcExec Error.%n%1
The blackening process was abnormal.
50114
Spooler
GetCommitProcJob Error.%n%1
Commitment job acquisition response Restart. If the same symptom frequently process error. occurs, perform a reinstallation and then The spooler control status was abnormal. initialize the image database. The commitment jog acquisition response message was not successfully issued. The data was not found in the database. An unknown program error occurred.
Spooler
50114
Spooler
QueueSuspend Error.%n%1
Queue output pause request process error. Abnormal spooler control status. Illegal parameter. Unsuccessful queue output pause request message issuance. Other program error.
Spooler
50115
FFOutImgPrc
RecognizeProcExec Error.%n%1
The blackening automatic recognition process was abnormal.
50115
Spooler
SetCommitProcComplete Error.%n%1
Commitment completion notification Restart. If the same symptom frequently process error. occurs, perform a reinstallation and then The spooler control status was abnormal. initialize the image database. An illegal parameter was encountered. The commitment completion notification message was not successfully issued. The queue was not found. The data was not found in the database. An unknown program error occurred.
Spooler
50115
Spooler
QueueResume Error.%n%1
Queue output resumption request process error. The spooler control state was abnormal. An illegal parameter was encountered. A queue output resumption request message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
50116
FFOutImgPrc
ExecMarker Error.%n%1
The marker imbedding process was abnormal.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
020-221-02E 01.08.2010 FM5563
Output completion notification process error. The spooler control state was abnormal. An illegal parameter was encountered. An output completion notification message was not successfully issued. Data was not databased. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
● Contact your service engineer. Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
CR-IR 391CL Service Manual
Output image processing control
Output image processing control
Appx MT 1-264
Appx MT 1-265 Event
Event Source
Description
Causes
Remedies
Remarks
50116
Spooler
QueueSuspend Error.%n%1
Queue output pause request process error. Abnormal spooler control status. Illegal parameter. Unsuccessful queue output pause request message issuance. Other program error.
50116
Spooler
QueueDelete Error.%n%1
Queue deletion request process error. The spooler control state was abnormal. An illegal parameter was encountered. A queue deletion request message was not successfully issued. Output job file information was not successfully accessed. Queue deletion was not successful. Database access was not successful. Other program error.
50116
FFCustomMsgBox
Disk storing failed.
50117
FFOutImgPrc
LUTProcExec Error.%n%1
An abnormality occurred during a display gradation correction process.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50117
Spooler
QueueResume Error.%n%1
Queue output resumption request process error. The spooler control state was abnormal. An illegal parameter was encountered. A queue output resumption request message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
50117
Spooler
UnitSuspend Error.%n%1
Queue output resumption request process Restart. If the same symptom frequently error. occurs, perform a reinstallation and then The spooler control status was abnormal. initialize the image database. An illegal parameter was encountered. The queue output resumption request message was not successfully issued. An unknown program error occurred.
Spooler
50118
FFOutImgPrc
MPMCode Error.%n%1
An error occurred in an output information conversion process.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50118
Spooler
QueueDelete Error.%n%1
Queue deletion request process error. The spooler control state was abnormal. An illegal parameter was encountered. A queue deletion request message was not successfully issued. Output job file information was not successfully accessed. Queue deletion was not successful. Database access was not successful. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
020-221-02E 01.08.2010 FM5563
Spooler
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
● Contact your service engineer.
CR-IR 391CL Service Manual
Spooler
Appx MT 1-265
Appx MT 1-266 Event
Event Source
Description
Causes
Remedies
Remarks
50118
Spooler
UnitResume Error.%n%1
Unit resumption request process error. The spooler control state was abnormal. An illegal parameter was encountered. A unit resumption request message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50119
FFOutImgPrc
Trimming Error.%n%1
An error occurred while in trimming processing.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50119
Spooler
UnitSuspend Error.%n%1
Queue output resumption request process Restart. If the same symptom frequently error. occurs, perform a reinstallation and then The spooler control status was abnormal. initialize the image database. An illegal parameter was encountered. The queue output resumption request message was not successfully issued. An unknown program error occurred.
Spooler
50119
Spooler
SuspendProc Error.%n%1
Equipment suspension request process Restart. If the same symptom frequently error. occurs, perform a reinstallation and then The spooler control status was abnormal. initialize the image database. The equipment suspension request message was not successfully issued. An unknown program error occurred.
Spooler
50119
FFCustomMsgBox
Disk storing failed.
Spooler
● Contact your service engineer.
50120 FFOutImgPrc
AnnotationProc Error.%n%1
An abnormality occurred during the Restart. If the same symptom frequently annotation information embedding process. occurs, perform a reinstallation and then initialize the image database.
50120 Spooler
UnitResume Error.%n%1
Unit resumption request process error. The spooler control state was abnormal. An illegal parameter was encountered. A unit resumption request message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
50120 Spooler
ResumeProc Error.%n%1
Equipment resumption request process Restart. If the same symptom frequently error. occurs, perform a reinstallation and then The spooler control status was abnormal. initialize the image database. The equipment resumption request message was not successfully issued. An unknown program error occurred.
Spooler
50121 FFOutImgPrc
FNCProc Error.%n%1
FNC Proc Error
50121 Spooler
SuspendProc Error.%n%1
Equipment suspension request process Restart. If the same symptom frequently error. occurs, perform a reinstallation and then The spooler control status was abnormal. initialize the image database. The equipment suspension request message was not successfully issued. An unknown program error occurred.
020-221-02E 01.08.2010 FM5563
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
CR-IR 391CL Service Manual
Spooler
Appx MT 1-266
Appx MT 1-267 Event
Event Source
Description
Causes
Remedies
50121 Spooler
EndProc Error.%n%1
50121 FFCustomMsgBox
Disk storing failed.
50122 Spooler
ResumeProc Error.%n%1
50122 FFCustomMsgBox
Disk storing failed.
50122 FFOutImgPrc
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode: %4%n Arbitrary Information Details.
A DDO file was not successfully read.
Restart. If the same symptom recurs, perform a reinstallation and then initialize the image database.
50123 Spooler
EndProc Error.%n%1
End request process error. The spooler control state was abnormal. An end request message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
50123 FFCustomMsgBox
Disk storing failed.
50123 FFOutImgPrc
DICOM ReplaceVR/Push Error.
Data setup was not successfully performed Restart. If the same symptom recurs, for a DDO file. perform a reinstallation and then initialize the image database.
50124 FFOutImgPrc
SaveFile Error (%1)
Failed in storing the information file (DDO). Restart. If the same symptom recurs, perform a reinstallation and then initialize the image database.
50125 FFOutImgPrc
No Original Image File Name.
There is no HQ image file in the information Restart. If the same symptom recurs, file (DDO). perform a reinstallation and then initialize the image database.
50126 FFOutImgPrc
Get Image File Number Error.
The number of image files was not successfully acquired.
50127 FFOutImgPrc
Get Original DDO FileName Error A DDO filename was not successfully : [%1] acquired.
Restart. If the same symptom recurs, perform a reinstallation and then initialize the image database.
50128 FFOutImgPrc
Get Output DDO FileName Error.
Restart. If the same symptom recurs, perform a reinstallation and then initialize the image database.
50129 FFCustomMsgBox
Disk storing failed.
020-221-02E 01.08.2010 FM5563
End request process error. The spooler control state was abnormal. An end request message was not successfully issued. Other program error.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Remarks Spooler
● Contact your service engineer. Equipment resumption request process Restart. If the same symptom frequently error. occurs, perform a reinstallation and then The spooler control status was abnormal. initialize the image database. The equipment resumption request message was not successfully issued. An unknown program error occurred.
Spooler
● Contact your service engineer.
Spooler
● Contact your service engineer.
The output DDO file name was not successfully acquired.
%1=File path
Restart. If the same symptom recurs, perform a reinstallation and then initialize the image database. %1=File path
Contact your service engineer.
CR-IR 391CL Service Manual
Appx MT 1-267
Appx MT 1-268 Event
Event Source
Description
Causes
Remedies
50129 FFOutImgPrc
OutputJob Object Data Set (%1) Error
File data setup failed.
Restart. If the same symptom recurs, perform a reinstallation and then initialize the image database.
50130 FFOutImgPrc
FFGeneralImageProc.Initialize Error.
Component initialization failed.
Restart. If the same symptom recurs, perform a reinstallation.
50131 FFOutImgPrc
File Copy Failed : [%1] -> [%2]
The file was unsuccessfully copied.
Restart. If the same symptom recurs, perform a reinstallation.
50132 FFOutImgPrc
Make Image File Failed.
Image file creation failed.
Restart. If the same symptom recurs, perform a reinstallation.
50133 FFOutImgPrc
Make Output DDO File Failed.
The output DDO file was not successfully created.
Restart. If the same symptom recurs, perform a reinstallation.
50150 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50151 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50152 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50153 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50154 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50155 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50156 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50157 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50158 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50159 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50160 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50161 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50162 FFCustomMsgBox
An attempt to output to C@Rna data center resulted in a failure.
● Contact your service engineer.
50163 FFOutImgPrc
SetImgInf Error.%n%1
020-221-02E 01.08.2010 FM5563
Information retrieval from DDO for reference failed.
Remarks %1=File path
%1=Path of the source file for copying %2=Path of the target file for copying
Restart both the server application and client application. If this situation should occur frequently, reinstall and initialize the image DB.
CR-IR 391CL Service Manual
Appx MT 1-268
Appx MT 1-269 Event
Event Source
Description
Causes
50200 FFCustomMsgBox
[50200] Failed in output processing of JPEG/BMP file. > Contact your service engineer.
Just as the message states.
50201 FFCustomMsgBox
[50201] Failed in output processing of JPEG/BMP file. > Contact your service engineer.
Just as the message states.
50202 FFCustomMsgBox
[50202] Failed in output processing of JPEG/BMP file. > Contact your service engineer.
Just as the message states.
50203 FFCustomMsgBox
[50203] Failed in output processing of JPEG/BMP file. > Contact your service engineer.
Just as the message states.
50204 FFCustomMsgBox
[50204] Failed in output processing of JPEG/BMP file. > Contact your service engineer.
Just as the message states.
50205 FFCustomMsgBox
[50205] Failed in the output of JPEG/BMP file. > Failed in gaining access to the folder to save. > Check the conditions of the folder to save.
Just as the message states.
50206 FFCustomMsgBox
[50206] Failed in output processing of JPEG/BMP file. > Contact your service engineer.
Just as the message states.
50211
FFCustomMsgBox
[50211] Failed in output processing of JPEG/BMP file. > The name of the output destination is invalid. + Contact your service engineer.
Just as the message states.
50212 FFCustomMsgBox
[50212] Failed in output processing of JPEG/BMP file. > The name of the output destination is invalid. + Contact your service engineer.
Just as the message states.
50213 FFCustomMsgBox
[50213] Failed in output processing of JPEG/BMP file. + Contact your service engineer.
Just as the message states.
50215 FFCustomMsgBox
[50215] Failed in output processing of JPEG/BMP file. > The name of the output destination is invalid. + Contact your service engineer.
Just as the message states.
020-221-02E 01.08.2010 FM5563
Remedies
CR-IR 391CL Service Manual
Remarks
Appx MT 1-269
Appx MT 1-270 Event
Event Source
Description
Causes
Remedies
50216 FFCustomMsgBox
[50216] Failed in output processing of JPEG/BMP file. > The name of the output destination is invalid. + Contact your service engineer.
50600 FFCustomMsgBox
A fatal error occurred.
Contact your service engineer.
50604 FFCustomMsgBox
Failed in registering the following images. StudyInstanceUID : %s SOPInstanceUID : %s
Contact your service engineer.
50605 FFCustomMsgBox
Data in the disk inserted into the drive for storage may have been broken.
Contact your service engineer.
50702 PDIWizard
PDI Drive None
PDI output is disabled on this equipment.
System settings may not have been performed correctly. Verify settings and reperform PDI output.
50703 PDIWizard
Drive Select Error
No disk drive could be recognized.
Check to see that the disk drive is connected and retry to recognize disk drive.
50704 PDIWizard
Media Eject Error
The disk could not be removed.
It is possible that the disk is being used. If so, reperform PDI output after the currently performed operation is finished.
50704 PDIWizard
Eject FALSE
The disk could not be removed.
50710 PDIWizard
Download File None
There are no images for PDI output.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
Image File None
None of the images is available for PDI output.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
GetUnicodeVR Error
Failed to capture image information from the images for PDI output.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
Remarks
Just as the message states.
CR-IR 391CL Service Manual
Appx MT 1-270
Appx MT 1-271 Event
Event Source
Description
Causes
Remedies
50710 PDIWizard
PDI Template Folder None
The is no template folder for PDI output.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
OutImageProc Run Proc Err
Creation of a file targeted for PDI output failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
OutImageProc ExecImageProc Err
Creation of a file targeted for PDI output failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
OutputJob SetItem Err
Creation of a file targeted for PDI output failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
OutImageProc ImageProc Err
Creation of a file targeted for PDI output failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
DICOMStreamFile Create Error
Creation of a file targeted for PDI output failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
MediaUID Create Error
Creation of a file targeted for PDI output failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
DICOMDIR Create Start Error
Creation of a file targeted for PDI output failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-271
Appx MT 1-272 Event
Event Source
Description
Causes
Remedies
50710 PDIWizard
Modality Name Invalid
Data is illegal.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
FFDiskWriteCom Init Error
Component initialization failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
Media Check Error
The inserted disk could not be checked.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
Drive Eject Lock Error
The drive could not be locked.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
Param Error
Data is illegal.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
Get Server Name Error
An attempt to acquire server equipment name failed.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
Get Caption Error
An attempt to acquire character strings to be displayed on the screen resulted in a failure.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-272
Appx MT 1-273 Event
Event Source
Description
Causes
Remedies
50710 PDIWizard
Get SystemInfo Error
An attempt to acquire system setup information resulted in a failure.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
Get IPAddress Error
Acquisition of IP address resulted in a failure.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50710 PDIWizard
BG GetMutexl Error
An error occurred in an attempt to acquire exclusive right of the drive.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50750 PDIWizard
Initialize Error.
An error occurred during B’sGOLD library initialization processing.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50751 PDIWizard
Terminate Error.
An error occurred during B’sGOLD library termination processing.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50752 PDIWizard
GetMutex Error.
An error occurred in an attempt to acquire exclusive right of the drive.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50753 PDIWizard
FreeMutex Error.
An error occurred in an attempt to release exclusive right of the drive.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50754 PDIWizard
DecideDrive Error.
An error occurred during drive selection processing.
Check to see that the disk drive is connected, and reperform the same processing.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-273
Appx MT 1-274 Event
Event Source
Description
Causes
Remedies Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50755 PDIWizard
GetMediaInfo Error.
An error occurred in an attempt to acquire disk information.
50756 PDIWizard
WriteMedia Error.
An error occurred when writing data onto a If another application is up and running, disk. shut it down and reperform data writing or restart the computer and then reperform it.
50757 PDIWizard
Eject Error.
The disk could not be removed.
It is possible that the disk is being used. If so, retry PDI output after the currently performed operation is finished.
50578 PDIWizard
EjectLock Error.
The drive could not be locked.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50579 PDIWizard
EjectUnLock Error.
An error occurred when unlocking the drive.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50760 PDIWizard
Program Error.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50800 FFCustomMsgBox
[50800] An error occurred by a free layout.
An unknown error occurred.
Restart both the server application and client application. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
*Check that the network cable is connected, and then execute again. Check that the server computer is started, and then execute again. >If the same symptom recurs even after performing the above, contact our service engineer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-274
Appx MT 1-275 Event
Event Source
50806 FFCustomMsgBox
Description
Causes
[50806] Failed in film output of the It is possible that the network cable was Free Layout. not attached at the time of film output. *Check that the network cable is connected, and then execute again. Check that the server computer is started, and then execute again. >If the same symptom recurs even after performing the above, contact our service engineer.
Remedies
Remarks
Check that the network cable is connected and the server computer is started, and then retry the operation. Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50810 FreeLayout Communicator
The thread has already started.
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50810 FreeLayout Communicator
Delete “···” failed. A program error occurred. Exceptional error (message output by OS).
Restart the server application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50810 FreeLayout Communicator
Exceptional error (message output A program error occurred. by OS).
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50810 FreeLayout Communicator
directory is already exists.···
There is no operational problem.
50811
Exceptional error (message output A program error occurred. by OS).
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Free layout output file deletion processing has failed.
50812 FreeLayout Communicator
CreatorIF.FLCRequest(···) failed.
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
A free layout print request has failed.
50813 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) unknown Event=···
An invalid event has been received.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
FreeLayout Communicator
020-221-02E 01.08.2010 FM5563
Already existing file name.
CR-IR 391CL Service Manual
Deletion of files or folders created with free layout failed. (If Read-only is checked, uncheck it.)
Appx MT 1-275
Appx MT 1-276 Event
Event Source
Description
Causes
Remedies
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) Rename Failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) PostMessage Failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) PostMessage Failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) DDOSetting Failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) Conversion Failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) new OutputJobComClass() failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-276
Appx MT 1-277 Event
Event Source
Description
Causes
Remedies
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) new FFDicomObj.DicomObj() failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) Image type judgment failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) DDO Tag Not Exist failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) DDO Data Length=0
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) Exception Error
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50816 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) PostMessage Failed
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
An output image creation error has occurred.
Appx MT 1-277
Appx MT 1-278 Event
Event Source
Description
Causes
Remedies
Remarks
50817 FreeLayout Communicator
Thread(Id=···, ···, Name=··· ) Error at Create Message Pipe.
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50818 FreeLayout Communicator
StudySeq count error.
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
There is not even one study information set.
50818 FreeLayout Communicator
ExecuteSqlSelect error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
An exception has occurred with search of the study DB.
50818 FreeLayout Communicator
Exceptional error (message output A program error occurred. by OS).
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50818 FreeLayout Communicator
DDOFile Not found error.
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Setting of output information to DDO has failed.
50818 FreeLayout Communicator
ChangeUserIdToPersonName error.
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
PN conversion processing has failed.
50818 FreeLayout Communicator
FFNetDBConnect error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Connection to NetConfigDB has failed.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-278
Appx MT 1-279 Event
Event Source
Description
Causes
Remedies
Remarks
50818 FreeLayout Communicator
FFNetDBGetDeviceList error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Device name retrieval has failed.
50818 FreeLayout Communicator
FFNetDBGetDicomAE error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
AE information retrieval (retrieval failed error).
50818 FreeLayout Communicator
FFNetDBGetDicomAE error. Not found.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
AE information retrieval (not applicable).
50818 FreeLayout Communicator
FFNetDBGetDicomPrint error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
DicomPrint information retrieval has failed. Not applicable
50818 FreeLayout Communicator
FFNetDBClose error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
NetConfig disconnection has failed.
50818 FreeLayout Communicator
DDO Not found error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
The LUT file set to each device does not exist.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-279
Appx MT 1-280 Event
Event Source
Description
Causes
Remedies
Remarks
50818 FreeLayout Communicator
FFGetString error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the NetConfigDB connection text string from Directory.ini has failed.
50818 FreeLayout Communicator
FFNetDBGetSysDeviceID error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of an own system device ID has failed.
50818 FreeLayout Communicator
FFNetDBGetLUTFile error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
PresentationLUT retrieval has failed.
50818 FreeLayout Communicator
Fatal error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the specified path information from Directory.ini has failed.
50818 FreeLayout Communicator
FFGetString error.( ···)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the specified path information from Directory.ini has failed.
50818 FreeLayout Communicator
GetLanguageValue error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Language setting retrieval has failed.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-280
Appx MT 1-281 Event
Event Source
Description
Causes
Remedies
Remarks
50818 FreeLayout Communicator
GetFormatInfo error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the format setting from the system DB has failed.
50818 FreeLayout Communicator
GetFontInfo error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Font setting retrieval has failed.
50818 FreeLayout Communicator
FFCreateUID error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
UID number creation has failed.
50818 FreeLayout Communicator
Get SystemInfo Error. (OutputResolution)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the output resolution for a non-FCR image has failed.
50818 FreeLayout Communicator
Get SystemInfo Error. (InstitutionName)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Institution name retrieval has failed.
50818 FreeLayout Communicator
Get SystemInfo Error. (FreeLayoutPatientIdFlag)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the free layout set value from the system settings DB has failed. (FreeLayoutPatientIdFlag)
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-281
Appx MT 1-282 Event
Event Source
Description
Causes
Remedies
Remarks
50818 FreeLayout Communicator
Get SystemInfo Error. (FreeLayoutDiskSize)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the free layout set value from the system settings DB has failed. (FreeLayoutDiskSize)
50818 FreeLayout Communicator
Get SystemInfo Error. (MsgTableName)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Setting retrieval from the system settings DB has failed.
50818 FreeLayout Communicator
Get FontInfo Error.(Multibyte)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the multibyte use classification has failed.
50818 FreeLayout Communicator
Get FontInfo Error.(Font)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font name has failed.
50818 FreeLayout Communicator
Get FontInfo Error.(FontSize)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size has failed.
50818 FreeLayout Communicator
Get FontInfo Error.(FontSizeS)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size S has failed.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-282
Appx MT 1-283 Event
Event Source
Description
Causes
Remedies
Remarks
50818 FreeLayout Communicator
Get FontInfo Error.(FontSizeSS)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size SS has failed.
50818 FreeLayout Communicator
Get FontInfo Error.(FontSizeM)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size M has failed.
50818 FreeLayout Communicator
Get FontInfo Error.(FontSizeL)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size L has failed.
50818 FreeLayout Communicator
Get FontInfo Error.(FontSizeLL)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size LL has failed.
50818 FreeLayout Communicator
Get FontInfo Error. (FontSizeStudyWindowBar)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size bar has failed.
50818 FreeLayout Communicator
Get FontInfo Error.(FontSizeText)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size text has failed.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-283
Appx MT 1-284 Event
Event Source
Description
Causes
Remedies
Remarks
50818 FreeLayout Communicator
Get FontInfo Error. (FontSizeOverlayInfo)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the font size overlay has failed.
50818 FreeLayout Communicator
Get SystemInfo Error. (DateFormat)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the date format has failed.
50818 FreeLayout Communicator
Get SystemInfo Error. (TimeFormat)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the time format has failed.
50818 FreeLayout Communicator
Get SysMDB error. (···)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of a text string or a numerical value from the text DB has failed.
50818 FreeLayout Communicator
Execute FFNetDBGetSystemInfo error.(···)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the system information for the Device ID has failed.
50818 FreeLayout Communicator
Get MeasurUnit Error. (SystemMeasurUnit)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Unit retrieval from the system settings has failed.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-284
Appx MT 1-285 Event
Event Source
Description
Causes
Remedies
Remarks
50818 FreeLayout Communicator
FFStrDBReadString Error.(···)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of angle measuring unit text string has failed.
50818 FreeLayout Communicator
FFStrDBConnect error.(···)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Opening of the text DB has failed.
50818 FreeLayout Communicator
FFGetString error.(···)
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Retrieval of the text DB file path has failed.
50818 FreeLayout Communicator
GetUserIDToName Error.
User information retrieval has failed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50818 FreeLayout Communicator
Get ddo_alloc_string_VR Error.
VR allocation failure error. PN conversion failure error. Information retrieval failure error after PN conversion.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50818 FreeLayout Communicator
CreateXMLObject Error.
XML file read-in conversion has failed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-285
Appx MT 1-286 Event
Event Source
Description
Causes
Remedies
Remarks
50818 FreeLayout Communicator
RegistExclusion Error.
Exclusion right retrieval has failed.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50818 FreeLayout Communicator
ResetExclusion Error.
Exclusion right has been released.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50819 FreeLayout Communicator
DownloadFile error.
A program error occurred.
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
File download from the server has failed.
50819 FreeLayout Communicator
GetPathInfo error.(USER_TEMP_ A program error occurred. PATH)
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Work folder retrieval from Directory.ini has failed.
50819 FreeLayout Communicator
CABFilePack error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CAB packing has failed.
50819 FreeLayout Communicator
UploadToOutput error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Uploading has failed.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-286
Appx MT 1-287 Event
Event Source
Description
Causes
Remedies
Remarks
50819 FreeLayout Communicator
DDO Not Initialize Exception. Exceptional error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Initialization has failed.
50819 FreeLayout Communicator
DDO Tag Not Exist Exception. Exceptional error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Missing tag error.
50819 FreeLayout Communicator
DDO TagLengh Zero Exception. Exceptional error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Length error.
50819 FreeLayout Communicator
Exceptional error (message output A program error occurred. by OS).
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50819 FreeLayout Communicator
DDO Load Exception. Exceptional error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Load failure error.
50819 FreeLayout Communicator
DDO Not Initialize. Exceptional error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
DICOM handle not set error.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-287
Appx MT 1-288 Event
Event Source
Description
Causes
Remedies
Remarks
50819 FreeLayout Communicator
DDO Save Exception. Exceptional error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Saving has failed.
50819 FreeLayout Communicator
DOD Tag Not Exist. Exceptional error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
A tag does not exist.
50819 FreeLayout Communicator
Exceptional error.
A program error occurred.
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
An exception has occurred when an error occurred with access to the network by pluggable protocol.
50855 FFCustomMsgBox
[50855] Format name cannot be Prohibited characters have been used for a Reconfirm the format name and try again. empty or contain special character format name. (\ / : * ? “ < > |). *Please confirm the format name again.
50856 FFCustomMsgBox
[50856] There exists format with the same name.
The entered format name already exists.
Change the name and try again.
The upper limit for the number of formats which can be created has been exceeded.
Delete registered formats and try again.
No printer has been set.
Use the service utility to confirm the printer settings and try again.
*Please input the new one. 50858 FFCustomMsgBox
[50858] The maximum number of formats creatable has been reached. *To create new format, please delete older format(s).
50861 FFCustomMsgBox
[50861] Unable to set up printer. Free Layout cannot be started. >Contact your service engineer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-288
Appx MT 1-289 Event
Event Source
50862 FFCustomMsgBox
Description [50862] Failed in Free Layout output. *Restart the computer. >Contact your service engineer if restarting of the computer does not resolve the problem.
50863 FFCustomMsgBox
[50863] Failed in Free Layout output.
Causes
[50864] There is not enough memory. *Restart the computer. >Contact your service engineer if restarting of the computer does not resolve the problem.
Remarks
The output target folder may not have been Restart both the server application and specified. client application. If the same error recurs, restart the computer. If restarting of the computer does not resolve the problem, confirm the situation in which the error occurred, and submit the event log to the manufacturer. File output to the output target folder may not be possible.
*Restart the computer. >Contact your service engineer if restarting of the computer does not resolve the problem. 50864 FFCustomMsgBox
Remedies
Restart both the server application and client application. If the same error recurs, restart the computer. If restarting of the computer does not resolve the problem, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
It is possible that there is not sufficient free Restart the computer and then retry the memory for reading in images at the free operation. layout screen. If restarting of the computer does not resolve the problem, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
50867 FFCustomMsgBox
[50867] No image layout has been Printing has been executed without performed. execution of image layout. Printing cannot be executed.
Perform image layout and try again.
50872 FFCustomMsgBox
[50872] Insufficient monitor resolution. Free Layout screen cannot be displayed.
Change the resolution of the PC and try again.
The monitor resolution is not sufficient.
>Contact your service engineer. 50873 FFCustomMsgBox
[50873] An error has occurred. Free Layout will be terminated. *Restart the computer. >Contact your service engineer if restarting of the computer does not resolve the problem.
50875 FreeLayout Communicator
020-221-02E 01.08.2010 FM5563
An error with unknown cause has occurred. Restart both the server application and client application. If the same error recurs, restart the computer. If restarting of the computer does not resolve the problem, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
An error has occurred at the free layout ErrorCode:%1%n screen. SubSystem:%2%n SourceFile: %3%n SpotCode: %4%n The error at the time of start of the freelayout screen.\n
Restart both the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-289
Appx MT 1-290 Event
Event Source
Description
Causes
Remedies
Remarks
51001 FFOUTPUT
Initialize Warning.%n[%1]
Initialization process warning. Check the network settings again. If the The output equipment execution was not settings are correct, perform a successfully started. reinstallation. The output equipment name (AE name/ host name) was not successfully acquired (there was an inconsistency between the option and network settings). The FFNET database was not successfully accessed.
Output section container.
51001 Spooler
Initialize Warning.%n[%1]
Initialization process warning. Check the network settings again. If the The output equipment execution was not settings are correct, perform a successfully started. reinstallation. The output equipment name (AE name/ host name) was not successfully acquired (there was an inconsistency between the option and network settings). The FFNET database was not successfully accessed.
Output section container.
51002 FFOUTPUT
State Change Warning.%n[%1]
State change notification process warning. Restart. An acquisition request was not successfully answered.
Output section container.
51002 Spooler
State Change Warning.%n[%1]
State change notification process warning. Restart. An acquisition request was not successfully answered.
Output section container.
51003 FFOUTPUT
Routine Change Warning.%n[%1]
Output section container.
51003 Spooler
Routine Change Warning.%n[%1]
Output section container.
51004 FFOUTPUT
Spool Warning.%n[%1]
Spool process warning.
Output section container.
51004 Spooler
Spool Warning.%n[%1]
Spool process warning.
Output section container.
51005 FFOUTPUT
ExeOutput Warning.%n[%1]
Forced-output process warning
Output section container.
51005 Spooler
ExeOutput Warning.%n[%1]
Forced-output process warning
Output section container.
51006 FFOUTPUT
Image Proc Warning.%n[%1]
An image process warning.
Output section container.
51006 Spooler
Utility Request Warning.%n[%1]
A utility transition process warning.
Output section container.
51007 FFOUTPUT
Output Proc Warning.%n[%1]
Output processing warning
Output section container.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-290
Appx MT 1-291 Event
Event Source
Description
Causes
Remedies
Remarks
51007 Spooler
Terminate Warning.%n[%1]
Restart. Termination process warning. A process status flag was not successfully set. A process termination response message was not successfully transmitted. An abnormality occurrence notification message was not successfully transmitted. A message box was not successfully displayed. A spooler termination request was not successfully called. A spooler control end request was not successfully called. The spooler control end response state was abnormal. An image process control end request was not successfully issued. An output device control end request was not successfully issued. The output device control end response state was abnormal.
Output section container.
51008 FFOUTPUT
Commit Proc Warning.%n[%1]
Commitment process warning.
Output section container.
51008 Spooler
Image Proc Warning.%n[%1]
An image process warning.
Output section container.
51009 FFOUTPUT
Queue Resume Warning.%n[%1]
Queue resumption process warning.
Output section container.
51009 Spooler
Output Proc Warning.%n[%1]
Output processing warning
Output section container.
51010 FFCustomMsgBox
Specified device does not exist.
The setup data was incorrect or the equipment not started.
51010 FFOUTPUT
Queue Delete Warning.%n[%1]
Queue deletion process warning.
Output section container.
51010 Spooler
Queue Resume Warning.%n[%1]
Queue resumption process warning.
Output section container.
51011
FFCustomMsgBox
Failed in reading of the configuration file (TagLookup.ini).
The setup file format was incorrect or the file could not be read.
51011
FFOUTPUT
Unit Suspend Warning.%n[%1]
Equipment output suspension process warning.
Output section container.
51011
Spooler
Queue Delete Warning.%n[%1]
Queue deletion process warning.
Output section container.
51012 FFCustomMsgBox
Failed in reading of the gray level correction file.
The setup file format was incorrect or the file could not be read.
51012 FFOUTPUT
Unit Resume Warning.%n[%1]
Equipment output resumption warning.
Output section container.
51012 Spooler
Unit Suspend Warning.%n[%1]
Equipment output suspension process warning.
Output section container.
51013 FFCustomMsgBox
Failed in output process.
The system was unstable.
51013 FFOUTPUT
Priority Change Warning.%n[%1]
Queue priority change warning.
020-221-02E 01.08.2010 FM5563
Check settings or the equipment.
Check settings.
Check settings.
Restart. If the same symptom recurs, perform a reinstallation. Output section container.
CR-IR 391CL Service Manual
Appx MT 1-291
Appx MT 1-292 Event
Event Source
Description
Causes
Remedies
Remarks
51013 Spooler
Unit Resume Warning.%n[%1]
Equipment output resumption warning.
Output section container.
51014 FFOUTPUT
Utility Request Warning.%n[%1]
A utility transition process warning.
Output section container.
51015 FFOUTPUT
Terminate Warning.%n[%1]
Termination process warning. Restart. A process status flag was not successfully set. A process termination response message was not successfully transmitted. An abnormality occurrence notification message was not successfully transmitted. A message box was not successfully displayed. A spooler termination request was not successfully called. A spooler control end request was not successfully called. The spooler control end response state was abnormal. An image process control end request was not successfully issued. An output device control end request was not successfully issued. The output device control end response state was abnormal.
Output section container.
51025 FFCustomMsgBox
An image being output exists.
51050 FFCustomMsgBox
An attempt to output images to the printer resulted in a failure.
51051 FFCustomMsgBox
An attempt to output images to the printer resulted in a failure.
51100
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: Run Proc execution was used. An internal %4%nThe method exception error system error occurred. at the time of Run Proc execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51101
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: End Proc execution was used. An internal %4%nThe method exception error system error occurred. at the time of End Proc execution.\ n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
Press OK to shut down the system. Otherwise, press Cancel.
CR-IR 391CL Service Manual
Appx MT 1-292
Appx MT 1-293 Event
Event Source
Description
51102
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 %nSourceFile:%3%nSpotCode:% 4%nNotice method exception error of a Queue operation end.\n
51103
FFOutPutEvent
51104
Causes
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 An exception occurred during main thread %nSourceFile: %3%nSpotCode: execution. An internal system error %4%nThe exception error at the occurred. time of an end during main thread execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 The output operation table was not %nSourceFile:%3%nSpotCode:% successfully initialized. An internal system 4%nThe initialization error of an error occurred. output operation table.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51105
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of state changes of an output operation table.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51106
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 An exception occurred during an %nSourceFile:%3%nSpotCode:% XMLCreation process. An internal system 4%nXMLCreation processing error occurred. exception error.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
An exception occurred when the queue operation termination notification method was used. An internal system error occurred.
Remedies
Output operation table state transition failed. An internal system error occurred.
CR-IR 391CL Service Manual
Appx MT 1-293
Appx MT 1-294 Event
Event Source
Description
Causes
Remedies
Remarks
51107
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 An exception occurred during SQL %nSourceFile:%3%nSpotCode:% execution. An internal system error 4%nExecQuery error.\n occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51108
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nSQL execution result acquisition error.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51109
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 An exception occurred during an output Restart. If the same symptom recurs, %nSourceFile:%3%nSpotCode:% operation read process. An internal system perform a reinstallation. 4%nOutput operation reading error occurred. processing exception error.\n
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51110
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nOutput operation information deletion error.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51149
FFOutPutEvent
ErrorCode:%1%nSubSystem:%2 An error of unknown cause occurred. %nSourceFile:%3%nSpotCode:% 4%nUnknown Error.\n
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
The SQL execution result was not successfully acquired. An internal system error occurred.
The output operation information was not successfully deleted. An internal system error occurred.
CR-IR 391CL Service Manual
Appx MT 1-294
Appx MT 1-295 Event
Event Source
Description
Causes
Remedies
Remarks
51200 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of constructor generation.\n
The constructor was not successfully generated. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51201 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of the message transmission to a main thread.\n
An exception occurred during main thread execution. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51202 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred during main thread %nSourceFile: %3%nSpotCode: execution. An internal system error %4%nThe error at the time of the occurred. message transmission2 to a main thread.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51203 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of the message transmission to a main thread.\n
Message transmission to the output thread Restart. If the same symptom recurs, failed. An internal system error occurred. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51204 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 A message transmission to the reserve %nSourceFile:%3%nSpotCode:% queue failed. An internal system error 4%nThe message transmitting occurred. error to reserve queue.\n
020-221-02E 01.08.2010 FM5563
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Appx MT 1-295
Appx MT 1-296 Event
Event Source
Description
Causes
Remedies
Remarks
51205 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 Message transmission to the status Restart. If the same symptom recurs, %nSourceFile:%3%nSpotCode:% monitoring thread failed. An internal system perform a reinstallation. 4%nThe message transmitting error occurred. error to a state surveillance thread.\n
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51206 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: Run Proc execution was used. An internal %4%nThe method exception error system error occurred. at the time of Run Proc execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51207 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: End Proc execution was used. An internal %4%nThe method exception error system error occurred. at the time of End Proc execution.\ n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51208 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: MediaOutputPrc execution was used. %4%nThe method exception error An internal system error occurred. at the time of Media Output Proc execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51209 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred during main thread %nSourceFile: %3%nSpotCode: execution. An internal system error %4%nThe exception error at the occurred. time of an end during main thread execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-296
Appx MT 1-297 Event
Event Source
Description
Causes
Remedies
Remarks
51210 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred during output %nSourceFile:%3%nSpotCode:% request thread execution. This is an 4%nThe exception error at the internal system error. time of an end during output thread execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51211
ErrorCode:%1%nSubSystem:%2 An exception occurred while the status %nSourceFile: %3%nSpotCode: monitoring thread was being executed. %4%nThe exception error at the This is an internal system error. time of an end during surveillance thread execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51212 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 An XML character string was not %nSourceFile:%3%nSpotCode:% successfully read. An internal system error 4%nXML character sequence load occurred. error.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51213 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nXML character reading error.\n
With the Client Utility, review the setup Restart. If the same symptom recurs, information about the automatic verification perform a reinstallation. user.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51214 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nHistory information file generation error.\n
The history information file was not successfully created. An internal system error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
FFMediaOutput
020-221-02E 01.08.2010 FM5563
Restart. If the same symptom recurs, perform a reinstallation.
CR-IR 391CL Service Manual
Appx MT 1-297
Appx MT 1-298 Event
Event Source
Description
Causes
Remedies
Remarks
51215 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nPicture storage demand data creation error.\n
Image storage request data was not successfully created. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51216 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nXML character reading processing exception error.\n
An exception occurred during an XML Restart. If the same symptom recurs, character read process. An internal system perform a reinstallation. error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51217 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 A media control instruction component %nSourceFile:%3%nSpotCode:% deletion request was not successfully 4%nMedia control directions issued. An internal system error occurred. component deletion demand failure.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51249 FFMediaOutput
ErrorCode:%1%nSubSystem:%2 An error of unknown cause occurred. %nSourceFile:%3%nSpotCode:% 4%nUnknown Error.\n
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51250 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of constructor generation.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
The constructor was not successfully generated. An internal system error occurred.
CR-IR 391CL Service Manual
Appx MT 1-298
Appx MT 1-299 Event
Event Source
Description
Causes
51251 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of the message transmission to a main thread.\n
An exception occurred during main thread execution. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51252 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of the message transmission to a main thread.\n
Message transmission to the output thread Restart. If the same symptom recurs, failed. An internal system error occurred. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51253 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 A message transmission to the reserve %nSourceFile:%3%nSpotCode:% queue failed. An internal system error 4%nThe message transmitting occurred. error to reserve queue.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51254 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: Run Proc execution was used. An internal %4%nThe method exception error system error occurred. at the time of Run Proc execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51255 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: End Proc execution was used. An internal %4%nThe method exception error system error occurred. at the time of End Proc execution.\ n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
Remedies
CR-IR 391CL Service Manual
Remarks
Appx MT 1-299
Appx MT 1-300 Event
Event Source
Description
Causes
Remedies
Remarks
51256 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred during main thread %nSourceFile: %3%nSpotCode: execution. An internal system error %4%nThe exception error at the occurred. time of an end during main thread execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51257 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred during output %nSourceFile:%3%nSpotCode:% request thread execution. This is an 4%nThe exception error at the internal system error. time of an end during output thread execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51258 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nXML character reading error.\n
With the Client Utility, review the setup Restart. If the same symptom recurs, information about the automatic verification perform a reinstallation. user.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51259 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDDO file name reading error.\n
A DDO filename was not successfully read. Restart. If the same symptom recurs, An internal system error occurred. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51260 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nXML character reading processing exception error.\n
An exception occurred during an XML Restart. If the same symptom recurs, character read process. An internal system perform a reinstallation. error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-300
Appx MT 1-301 Event
Event Source
Description
Causes
Remedies
Remarks
51261 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt error-generates within a processed picture generation component.\n
Image processing failed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The number of images was not successfully read. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51263 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 A bitmap generation process was not Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: successfully performed. An internal system perform a reinstallation. %4%nIt error-generates in bit map error occurred. generation processing.\n
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51264 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe exception error at the time of bit map creation.\n
An exception occurred when an attempt was made to create a bitmap. This is an internal system error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51265 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nRAW data reading error.\n
The RAW data was not successfully read. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-301
Appx MT 1-302 Event
Event Source
Description
Causes
Remedies
Remarks
51266 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe exception error at the time of Jpeg file creation.\n
An exception occurred when an attempt was made to create a JPEG file. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51267 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nHistory file creation went wrong.\n
The history file was not successfully Restart. If the same symptom recurs, created. An internal system error occurred. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception occurred during a history file Restart. If the same symptom recurs, creation process. This is an internal system perform a reinstallation. error.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51269 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nFile path specification of a copy place is unusual.\n
The general-purpose file was not successfully output. The copy destination file path was not properly specified.
With the User Utility, check the copy destination setting. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51270 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe holder of a copy place is not found.\n
The general-purpose file was not successfully output. The copy destination file path was not properly specified.
With the User Utility, check the copy destination setting. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-302
Appx MT 1-303 Event
Event Source
Description
Causes
Remedies
Remarks
51271 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nCopy advance withdrawal power processing exception error (a network cuts during a file copy).\n
An exception occurred during the copy destination output process. The network was disconnected while a file was copied.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51284 FFGeneralOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nAn initialization error of a component (FFMultiImgProcCOM).\n
Component initialization failed.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51285 GeneralOutput
I failed in the setting of the input image format.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
51286 GeneralOutput
DDO file name reading error.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
51287 GeneralOutput
Width of the output image size or height is 0.
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-303
Appx MT 1-304 Event
Event Source
Description
Causes
Remedies
Remarks
51300 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of constructor generation.\n
The constructor was not successfully generated. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51301 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of the message transmission to a main thread.\n
An exception occurred during main thread execution. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51302 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of the message transmission to a main thread.\n
Message transmission to the output thread Restart. If the same symptom recurs, failed. An internal system error occurred. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51303 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe message transmitting error to reserve queue.\n
A message transmission to the reserve queue failed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51304 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe message transmitting error to a state surveillance thread.\n
Message transmission to the status Restart. If the same symptom recurs, monitoring thread failed. An internal system perform a reinstallation. error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-304
Appx MT 1-305 Event
Event Source
Description
Causes
Remedies
Remarks
51305 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: Run Proc execution was used. An internal %4%nThe method exception error system error occurred. at the time of Run Proc execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51306 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: End Proc execution was used. An internal %4%nThe method exception error system error occurred. at the time of End Proc execution.\ n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51307 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred when a method for %nSourceFile: %3%nSpotCode: CaRnaOutputPrc execution was used. %4%nThe method exception error An internal system error occurred. at the time of C@Rna Output Proc execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51308 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred during main thread %nSourceFile: %3%nSpotCode: execution. An internal system error %4%nThe exception error at the occurred. time of an end during main thread execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51309 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe exception error at the time of an end during output thread execution.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
An exception occurred during output request thread execution. This is an internal system error.
CR-IR 391CL Service Manual
Appx MT 1-305
Appx MT 1-306 Event
Event Source
Description
Causes
51310 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 An exception occurred while the status %nSourceFile: %3%nSpotCode: monitoring thread was being executed. %4%nThe exception error at the This is an internal system error. time of an end during surveillance thread execution.\n
51311
FFCaRnaOutput
Remedies
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nXML character reading error.\n
With the Client Utility, review the setup Restart. If the same symptom recurs, information about the automatic verification perform a reinstallation. user.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The number of images was not successfully read. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51313 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe reading error of delivery classification.\n
The delivery type was not successfully read. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The abstract syntax was not successfully read. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
The transmission syntax was not successfully read. An internal system error occurred.
51316 FFCaRnaOutput
ErrorCode:%1%nSubSystem: An attempt to read the C@Rna image %2%nSourceFile: transfer parameter character string failed. %3%nSpotCode: %4%nC@Rna An internal system error occurred. picture transmission parameter character sequence reading error.\ n
51317 FFCaRnaOutput
Remedies
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDDO file name reading error.\n
A DDO filename was not successfully read. Restart. If the same symptom recurs, An internal system error occurred. perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51318 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nXML character reading processing exception error.\n
An exception occurred when an attempt was made to read XML characters. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51319 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 The DICOM stream file was not %nSourceFile: %3%nSpotCode: successfully created. An internal system %4%nDICOM stream file creation error occurred. error.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-307
Appx MT 1-308 Event
Event Source
Description
51320 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nDDO file Open error.\n
51321 FFCaRnaOutput
Causes
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 The property settings are inconsistent. %nSourceFile: %3%nSpotCode: An internal system error occurred. %4%nThey are those with inconsistency to a property setup.\ n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51322 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nIt error-generates within a processed picture generation component.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51323 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 A bitmap generation process was not Restart. If the same symptom recurs, %nSourceFile: %3%nSpotCode: successfully performed. An internal system perform a reinstallation. %4%nIt error-generates in bit map error occurred. generation processing.\n
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
A DDO file was not successfully read. An internal system error occurred.
Remedies
Image processing failed. An internal system error occurred.
An exception occurred while an image Restart. If the same symptom recurs, storage request process was being perform a reinstallation. performed. This is an internal system error.
CR-IR 391CL Service Manual
Appx MT 1-308
Appx MT 1-309 Event
Event Source
Description
Causes
Remedies
Remarks
51325 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of picture storage execution.\n
Image storage failed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51326 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of case picture registration file registration.\n
An attempt to register a case study image registration file failed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception occurred during a case study Restart. If the same symptom recurs, image registration process. This is an perform a reinstallation. internal system error.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception occurred when a DICOM stream image generation process was performed.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51329 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of a Teleradiology request upload demand.\n
An attempt to make a request for a remote Restart. If the same symptom recurs, radiological interpretation request upload perform a reinstallation. failed. An internal system error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
An exception occurred when an attempt was made to make a request for a remote radiological interpretation request upload. This is an internal system error.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51331 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nA delivery result is notified to an output main process. It error-notifies.\n
The delivery result notification was not Restart. If the same symptom recurs, successfully sent to the output main perform a reinstallation. process. An internal system error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51332 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 PN conversion/unicode data acquisition %nSourceFile: %3%nSpotCode: from a DICOMObject failed. An internal %4%nPN conversion, the Unicode system error occurred. data acquisition error from DICOM Object.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51333 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nPN conversion, an internal expression change error.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51334 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 An attempt to acquire the upload support %nSourceFile: %3%nSpotCode: component status failed. An internal %4%nUpload support component system error occurred. state acquisition error.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
PN conversion/internal expression change failed. An internal system error occurred.
Remedies
CR-IR 391CL Service Manual
Remarks
Appx MT 1-310
Appx MT 1-311 Event
Event Source
Description
51337 FFCaRnaOutput
ErrorCode:%1%nSubSystem: %2%nSourceFile: %3%nSpotCode: %4%nUpload support component processing discontinuation.\n
51338 FFCaRnaOutput
Causes
Remarks
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
ErrorCode:%1%nSubSystem:%2 An attempt to output an image to the C@ %nSourceFile: %3%nSpotCode: Rna data center failed. An internal system %4%nThe application error by the error occurred. side of the upload support component at the time of state acquisition.\n
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51339 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe upload support component communication error at the time of state acquisition.\n
An attempt to output an image to the C@ Rna data center failed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
A timeout occurred when an attempt was made to output an image. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51341 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nA upload support component side Queue-deletiondemand-goes wrong.\n
A queue deletion request failed on the Restart. If the same symptom recurs, upload support component side. An internal perform a reinstallation. system error occurred.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
020-221-02E 01.08.2010 FM5563
The upload support component process was aborted. An internal system error occurred.
Remedies
CR-IR 391CL Service Manual
Appx MT 1-311
Appx MT 1-312 Event
Event Source
Description
Causes
Remedies
Remarks
51342 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nThe error at the time of upload support component starting.\n
An attempt to start the upload support component failed. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51343 FFCaRnaOutput
ErrorCode:%1%nSubSystem:%2 %nSourceFile: %3%nSpotCode: %4%nRAW data reading error.\n
The RAW data was not successfully read. An internal system error occurred.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
Restart both the server PC and client PC. If the same error recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program).
51601 FFCustomMsgBox
The disk inserted in drive for management is inconsistent.
● Launch the Client Utlity and execute “Disk Restoration.”
51602 FFCustomMsgBox
Failed in mounting the disk inserted in drive for management.
● Launch the Client Utility and change disks.
51603 FFCustomMsgBox
Failed in writing disk management information. Possible causes are: (1) The drive has not been connected or power of drive is off. (2) No disk inserted or another disk inserted.
● Ensure that the drive has been connected correctly and a disk has been inserted into the drive.
51801 FFCustomMsgBox
[51801] Free Layout cannot be The free layout screen has been started performed since images are being during image display. displayed.
Retry the operation. If the problem is not resolved, restart the client application.
*Please wait and retry. 51804 FFCustomMsgBox
[51804] Output in progress… *Please wait and retry.
020-221-02E 01.08.2010 FM5563
Film output has been performed during film Retry the operation after completion of film output. output.
CR-IR 391CL Service Manual
Appx MT 1-312
Appx MT 1-313 Event
Event Source
51805 FFCustomMsgBox
Description [51805] Printer has not been set up.
Causes No printer has been set.
Remedies
Remarks
Use the service utility to confirm the printer settings and try again.
>Contact your service engineer. 51807 FFCustomMsgBox
[51807] Certain study is being viewed by either one of the units.
Nothing particular.
+Do you wish to continue processing except for the study being viewed? 51808 FFCustomMsgBox
[51808] Certain study is being viewed by either one of the units. *Please wait and retry.
51809 FFCustomMsgBox
[51809] Free disk space is insufficient.
The same study is being referenced from a Retry the operation. different client PC. If the problem is not resolved, restart the client application. Free disk space is insufficient.
*If the free layout screen is being displayed, close the screen first and then try again. *Delete unnecessary files to increase free disk space. >If not possible to do so, contact your service engineer. 51865 FFCustomMsgBox
[51865] Application cannot display There may be no database being used by free layout or access may not be possible. notes or perform note setting. *Restart the computer. >Contact your service engineer if restarting of the computer does not resolve the problem.
51866 FFCustomMsgBox
[51866] Failed in storing image incidental information setting.
Restart the PC and then retry the operation. If the problem is not resolved, perform a reinstallation.
There may be no database being used by free layout or access may not be possible.
Restart the PC and then retry the operation. If the problem is not resolved, perform a reinstallation.
Layout change for the image being read in has been performed during reading of a study image.
Retry the operation after image reading completion. If the problem is not resolved, restart the client application.
*Restart the computer. >Contact your service engineer if restarting of the computer does not resolve the problem. 51868 FFCustomMsgBox
[51868] Study images are being imported. Layout cannot be changed during image import.
51869 FFCustomMsgBox
[51869] Images subject to layout At the time of reading an image, an are being imported. operation has been performed to the image No operation can be performed on being read in. images being imported.
020-221-02E 01.08.2010 FM5563
Delete unnecessary files to increase free disk space, and then try again. If the problem is not resolved, restart the server application and client application.
Retry the operation after image reading completion. If the problem is not resolved, restart the client application.
CR-IR 391CL Service Manual
Appx MT 1-313
Appx MT 1-314 Event
Event Source
51870 FFCustomMsgBox
Description
Causes
[51870] Cannot read image data.
There may be no database being used by free layout or access may not be possible.
Restart the PC and then retry the operation. If the problem is not resolved, perform a reinstallation.
*Restart the computer. >Contact your service engineer if restarting of the computer does not resolve the problem.
Remedies
Remarks
52000 FFOutImgPrc
Warning.%n%1
Information for developers.
There is no operational problem.
52100 Spooler
Spooler Warning.%n%1
Common warning message. Queue information class related message. Image information (SOPInstanceUID) was not successfully acquired. The job status was not successfully acquired. Spooler class related message. A database connection was not successfully closed. Illegal image display format data.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
52101 Spooler
RunProc Warning.%n%1
Initialization process warning. A character string database connection was not successfully opened.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
52102 Spooler
OutputRegisterProc Warning.%n%1
Output destination registration process warning
52103 Spooler
StateChangeProc Warning.%n%1 Local printer/Dicom printer state change notification process warning. A unit state character string was not successfully acquired.
52104 Spooler
ErrorCheckProc Warning.%n%1
Data integrity check process warning.
52105 Spooler
RestoreJob Warning.%n%1
Job restoration warning. An output job file was not successfully accessed.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
52106 Spooler
SpoolProc Warning.%n%1
Spool process warning. Unit information acquisition was not successful. File deletion was not successful. Queue cancellation was not successful. Data was not successfully written into a log file.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
52107 Spooler
ReoutputProc Warning.%n%1
Reoutput start process warning
Spooler
52108 Spooler
StudyReqEndProc Warning.%n%1
Examination end request process warning. Restart. If the same symptom frequently occurs, perform a reinstallation and then A database was not successfully accessed. initialize the image database. DDO file information was not successfully acquired.
Spooler
020-221-02E 01.08.2010 FM5563
Spooler Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
Spooler
CR-IR 391CL Service Manual
Appx MT 1-314
Appx MT 1-315 Event
Event Source
Description
Causes
Remedies
Remarks
52109 Spooler
ExeOutputJob Warning.%n%1
52110
Spooler
GetImageProcJob Warning.%n%1 Image processing job acquisition process warning. An output unit type parameter error occurred.
52111
Spooler
SetImageProcComplete Warning.%n%1
Image processing completion notification process warning
52112
Spooler
GetOutputProcJob Warning.%n%1
Output job acquisition response process warning. An output unit type parameter error was encountered.
52113
Spooler
SetOutputProcComplete Warning.%n%1
Output completion notification process warning
Spooler
52114
Spooler
GetCommitProcJob Warning.%n%1
Commitment job acquisition response Restart. If the same symptom frequently process warning. occurs, perform a reinstallation and then A commitment equipment type parameter initialize the image database. error occurred.
Spooler
52114
Spooler
QueueSuspend Warning.%n%1
Queue output pause request process warning.
Spooler
52115
Spooler
SetCommitProcComplete Warning.%n%1
Commitment completion notification process warning.
Spooler
52115
Spooler
QueueResume Warning.%n%1
Queue output resumption request process warning.
Spooler
52116
Spooler
QueueSuspend Warning.%n%1
Queue output pause request process warning.
Spooler
52116
Spooler
QueueDelete Warning.%n%1
Queue deletion request process warning. An image database flag was not successfully set. The DDO file was not successfully deleted.
52117
Spooler
QueueResume Warning.%n%1
Queue output resumption request process warning.
52117
Spooler
UnitSuspend Warning.%n%1
Unit suspension request process warning. A unit status character string was not successfully acquired.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
52118
Spooler
QueueDelete Warning.%n%1
Queue deletion request process warning. An image database flag was not successfully set. The DDO file was not successfully deleted.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
020-221-02E 01.08.2010 FM5563
Forced output request process warning. Restart. If the same symptom frequently DDO file information was not successfully occurs, perform a reinstallation and then acquired. initialize the image database. Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler Spooler
Spooler Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
Spooler
Spooler
CR-IR 391CL Service Manual
Appx MT 1-315
Appx MT 1-316 Event
Event Source
Description
Causes
Remedies
Remarks
52118
Spooler
UnitResume Warning.%n%1
Unit resumption request process warning. A unit status acquisition error occurred.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
52119
Spooler
UnitSuspend Warning.%n%1
Unit suspension request process warning. A unit status character string was not successfully acquired.
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
52119
Spooler
SuspendProc Warning.%n%1
Unit suspension request process warning
52120 Spooler
UnitResume Warning.%n%1
Unit resumption request process warning. A unit status acquisition error occurred.
52120 Spooler
ResumeProc Warning.%n%1
Unit suspension request process warning
Spooler
52121 Spooler
SuspendProc Warning.%n%1
Unit suspension request process warning
Spooler
52121 Spooler
EndProc Warning.%n%1
End request process warning
Spooler
52122 Spooler
ResumeProc Warning.%n%1
Unit suspension request process warning
Spooler
52123 Spooler
EndProc Warning.%n%1
End request process warning
Spooler
52207 FFCustomMsgBox
Just as the message states. [52207] Failed in output processing of JPEG/BMP file. > Check the network settings with the output device.
52208 FFCustomMsgBox
[52208] Failed in output processing of JPEG/BMP file. > Check the network settings of the output destination.
52209 FFCustomMsgBox
Just as the message states. [52209] Failed in writing JPEG/ BMP file to the output destination. > Check the free space of the recording media.
52210 FFCustomMsgBox
[52210] Failed in output Just as the message states. processing of JPEG/BMP file. > No writable operation is allowed in the output destination folder.
52214 FFCustomMsgBox
[52214] Failed in output processing of JPEG/BMP file. > It may be write-protected.
Just as the message states.
52700 PDIWizard
User Cancel
PDI output processing was halted.
No particular action is required.
52701 PDIWizard
Media Not Insert
No disk is inserted. This disk is unwritable.
Insert a disk and retry processing.
52706 PDIWizard
Media Not Blank
Data already written on this disk. This disk is unwritable.
Insert a blank disk and retry processing.
52707 PDIWizard
Media Not Support
An unsupported disk was inserted. This disk in unwritable.
Insert a supported disk and retry processing.
52708 PDIWizard
Disk Capacity Over
Free disk space is insufficient. This disk is unwritable.
Decrease studies to be output and retry processing.
020-221-02E 01.08.2010 FM5563
Spooler Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
Spooler
Just as the message states.
CR-IR 391CL Service Manual
Appx MT 1-316
Appx MT 1-317 Event
Event Source
Description
Causes
Remedies
Remarks
53000 FFOutImgPrc
Infomation.%n%1
Information for developers.
53001 FFOUTPUT
Initialize Infomation.%n[%1]
Initialization process information
Output section container.
53001 Spooler
Initialize Infomation.%n[%1]
Initialization process information
Output section container.
53002 FFOUTPUT
State Change Information.%n[%1] State change notification process information
Output section container.
53002 Spooler
State Change Information.%n[%1] State change notification process information
Output section container.
53003 FFOUTPUT
Routine Change Information.%n[%1]
Routine change processing information
Output section container.
53003 Spooler
Routine Change Information.%n[%1]
Routine change processing information
Output section container.
53004 FFOUTPUT
Spool Information.%n[%1]
Spool process information
Output section container.
53004 Spooler
Spool Information.%n[%1]
Spool process information
Output section container.
53005 FFOUTPUT
ExeOutput Information.%n[%1]
Forced-output process information
Output section container.
53005 Spooler
ExeOutput Information.%n[%1]
Forced-output process information
Output section container.
53006 Spooler
Utility Request Information.%n[%1]
A utility transition process information.
Output section container.
53006 FFOUTPUT
Image Proc Information.%n[%1]
Image process information.
Output section container.
53007 Spooler
Terminate Information.%n[%1]
Termination process warning
Output section container.
53007 FFOUTPUT
Output Proc Information.%n[%1]
Output processing information
Output section container.
53008 Spooler
Image Proc Information.%n[%1]
Image process information.
Output section container.
53008 FFOUTPUT
Commit Proc Information.%n[%1]
Commitment process information output section container.
53009 FFOUTPUT
Queue Resume Information.%n[%1]
Queue resumption process information.
Output section container.
53009 Spooler
Output Proc Information.%n[%1]
Output processing information
Output section container.
53010 FFOUTPUT
Queue Delete Information.%n[%1] Queue deletion process information.
Output section container.
53010 Spooler
Queue Resume Information.%n[%1]
Output section container.
53011
FFOUTPUT
Unit Suspend Information.%n[%1] Equipment output suspension process information.
Output section container.
53011
Spooler
Queue Delete Information.%n[%1] Queue deletion process information.
Output section container.
53012 FFOUTPUT
Unit Resume Information.%n[%1]
Output section container.
53012 Spooler
Unit Suspend Information.%n[%1] Equipment output suspension process information.
020-221-02E 01.08.2010 FM5563
There is no operational problem.
Queue resumption process information.
Equipment output resumption information.
Output section container.
CR-IR 391CL Service Manual
Appx MT 1-317
Appx MT 1-318 Event
Event Source
Description
Causes
Remedies
Remarks
53013 FFOUTPUT
Priority Change Information.%n[%1]
Queue priority change information.
Output section container.
53013 Spooler
Unit Resume Information.%n[%1]
Equipment output resumption information.
Output section container.
53014 FFOUTPUT
Utility Request Information.%n[%1]
A utility transition process information.
Output section container.
53015 FFOUTPUT
Terminate Information.%n[%1]
Termination process information
Output section container.
53100 Spooler
Spooler Infomation.%n%1
A common information message.
Spooler
53101 Spooler
RunProc Infomation.%n%1
Initialization process information
Spooler
53102 Spooler
OutputRegisterProc Infomation.%n%1
Output destination registration process information
Spooler
53103 Spooler
StateChangeProc Infomation.%n%1
Information about the local printer/DICOM printer status change notification process.
Spooler
53104 Spooler
ErrorCheckProc Infomation.%n%1 Data integrity check process information.
Spooler
53105 Spooler
RestoreJob Infomation.%n%1
Spooler
53106 Spooler
SpoolProc Infomation.%n%1
Information in a spool process. Unit type mismatch notification.
53107 Spooler
ReoutputProc Infomation.%n%1
Reoutput start process information
Spooler
53108 Spooler
StudyReqEndProc Infomation.%n%1
Examination end request process information
Spooler
53109 Spooler
ExeOutputJob Infomation.%n%1
Forced output request process information
Spooler
53110
Spooler
GetImageProcJob Infomation.%n%1
Image processing job acquisition process information
Spooler
53111
Spooler
SetImageProcComplete Infomation.%n%1
Image processing completion notification process information
Spooler
53112
Spooler
GetOutputProcJob Infomation.%n%1
Output job acquisition response process information
Spooler
53113
Spooler
SetOutputProcComplete Infomation.%n%1
Output completion notification process information
Spooler
53114
Spooler
GetCommitProcJob Infomation.%n%1
Commitment job acquisition response process information.
Spooler
53114
Spooler
QueueSuspend Infomation.%n%1 Queue output pause request process information.
Spooler
53115
Spooler
SetCommitProcComplete Infomation.%n%1
Commitment completion notification process information.
Spooler
53115
Spooler
QueueResume Infomation.%n%1
Queue output resumption request process information.
Spooler
020-221-02E 01.08.2010 FM5563
Restart. If the same symptom frequently occurs, perform a reinstallation and then initialize the image database.
CR-IR 391CL Service Manual
Spooler
Appx MT 1-318
Appx MT 1-319 Event
Event Source
Description
Causes
Remedies
Remarks
53116
Spooler
QueueSuspend Infomation.%n%1 Queue output pause request process information.
Spooler
53116
Spooler
QueueDelete Infomation.%n%1
Queue deletion request process information.
Spooler
53117
Spooler
QueueResume Infomation.%n%1
Queue output resumption request process information.
Spooler
53117
Spooler
UnitSuspend Infomation.%n%1
Unit suspension request process information.
Spooler
53118
Spooler
UnitResume Infomation.%n%1
Unit resumption request process information.
Spooler
53118
Spooler
QueueDelete Infomation.%n%1
Queue deletion request process information.
Spooler
53119
Spooler
UnitSuspend Infomation.%n%1
Unit suspension request process information.
Spooler
53119
Spooler
SuspendProc Infomation.%n%1
Unit suspension request process information
Spooler
53120 Spooler
UnitResume Infomation.%n%1
Unit resumption request process information.
Spooler
53120 Spooler
ResumeProc Infomation.%n%1
Unit suspension request process information
Spooler
53121 Spooler
SuspendProc Infomation.%n%1
Unit suspension request process information
Spooler
53121 Spooler
EndProc Infomation.%n%1
End request process information
Spooler
53122 Spooler
ResumeProc Infomation.%n%1
Unit suspension request process information
Spooler
53123 Spooler
EndProc Infomation.%n%1
End request process information
Spooler
53600 FFMediaCommon
Logical Program Error. %n %1 %n %2
A program error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
With the Service Utility, set the correct format tool path.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Process ID %2=Thread ID %3=Spot code %4=Error code of GetLastError () %5=Drive name %6=Format tool path
Appx MT 1-319
Appx MT 1-320 Event
Event Source
Description
Causes
Remedies
53601 FFMediaCommon
Catch Exception Error. %n %1 %n %2
An exception error occurred.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
53602 FFMediaCommon
Out Of Memory Error. %n %1 %n %2
Memory allocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
53603 FFMediaCommon
Free Memory Error. %n %1 %n %2
Memory deallocation failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
53604 FFMediaCommon
Disk Full Error. %n %1 %n %2
The built-in hard disk does not have a sufficient free space.
Increase the hard disk drive’s free space, for instance, by deleting images.
53605 FFMediaCommon
Accept Invalid Commnd Error. %n An illegal process request was received. %1 %n %2
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
53606 FFMediaCommon
Cannot passed Xml Schema Check. %n %1 %n %2
An XML schema check failed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
53607 FFMediaCommon
ReadOnly Device. %n %1 %n %2
An instruction for writing into a read-only device was issued.
With the Service Utility, check the disk settings.
53608 FFMediaCommon
Media Used. %n %1 %n %2
An attempt was made to access the currently used medium.
Carry it out again after a while.
53609 FFMediaCommon
Media no exist. %n %1 %n %2
No medium is inserted in the specified drive.
Insert a medium into the drive.
53610 FFMediaCommon
Not Removable. %n %1 %n %2
The specified drive is not a removable drive.
With the Service Utility, check the disk settings.
53611
Formated Media. %n %1 %n %2
A formatted medium is inserted.
Insert an unformatted medium.
53612 FFMediaCommon
Media un-formatting. %n %1 %n %2
An unformatted medium is inserted.
Insert a formatted medium.
53613 FFMediaCommon
Media Read Only. %n %1 %n %2
A read-only medium is inserted.
Change the medium.
FFMediaCommon
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-320
Appx MT 1-321 Event
Event Source
Description
Causes
Remedies
53614 FFMediaCommon
Exchange Media. %n %1 %n %2
The specified medium was not inserted.
Insert a correct medium.
53615 FFMediaCommon
Demand processing was canceled. %n %1 %n %2
The requested process was aborted in compliance with a cancellation request.
There is no particular problem.
53616 FFMediaCommon
End Process Request. %n %1 %n %2
The process was aborted in compliance with a system shutdown request.
There is no particular problem.
53617 FFMediaCommon
Electric power off. %n %1 %n %2
The process was aborted due to power off. There is no particular problem.
53618 FFMediaCommon
DICOMDIR is inconsistent. %n %1 %n %2
The DICOMDIR file is inconsistent.
Rebuild the disk with the Client Utility.
53619 FFMediaCommon
Invalid Image Info. %n %1 %n %2
The entered image information is illegal.
Check the images stored on the medium.
53620 FFMediaCommon
Format Type Not Execution. %n %1 %n %2
Since the formatting method was invalidated, formatting was not accomplished.
With the Service Utility, check the disk settings.
53621 FFMediaCommon
Media Full. %n %1 %n %2
The medium is full.
There is no particular problem.
53622 FFMediaCommon
Used Media in Drive. %n %1 %n %2
The inserted medium is not new.
Insert a new medium.
53623 FFMediaCommon
Retrieve Image None. %n %1 %n %2
The image to be acquired was not found.
Rebuild the disk with the Client Utility.
53624 FFMediaCommon
New Media in Drive. %n %1 %n %2
A new medium is inserted.
Insert a correct medium.
53625 FFMediaCommon
Process Communication Error. %n %1 %n %2
An error occurred in the communication control.
Restart the server computer.
53626 FFMediaCommon
Verify False. %n %1 %n %2
The medium was not successfully verified.
Check the drive connection.
53627 FFMediaCommon
Format False. %n %1 %n %2
The medium was not successfully formatted.
Check that the medium is not writeprotected. Also, check that the medium is supported by the drive.
53628 FFMediaCommon
Get Mediafreespace False. %n %1 %n %2
The free space of the medium was not successfully acquired.
Check that the medium is not writeprotected. Also, check that the medium is supported by the drive.
53629 FFMediaCommon
Drive Not Exist. %n %1 %n %2
The specified drive was not found.
Restart the server computer.
53630 FFMediaCommon
Folder Not Exist. %n %1 %n %2
The specified folder was not found.
Restart the server computer.
53631 FFMediaCommon
File Not Exist. %n %1 %n %2
The specified file was not found.
Restart the server computer.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-321
Appx MT 1-322 Event
Event Source
Description
Causes
Remedies
53632 FFMediaCommon
Readonly File. %n %1 %n %2
The specified file or folder is read-only.
There is no particular problem.
53633 FFMediaCommon
File Error. %n %1 %n %2
An attempt to access a file failed.
There is no particular problem.
53634 FFMediaCommon
Write Protect. %n %1 %n %2
The medium is write-protected.
There is no particular problem.
53635 FFMediaCommon
Lock False. %n %1 %n %2
The medium was not successfully locked.
There is no particular problem.
53636 FFMediaCommon
Unlock False. %n %1 %n %2
The medium was not successfully unlocked.
There is no particular problem.
53637 FFMediaCommon
Eject False. %n %1 %n %2
The medium was not successfully ejected.
There is no particular problem.
53638 FFMediaCommon
Appoint Tag Is Empty. %n %1 %n %2
The specified tag was empty.
There is no particular problem.
53639 FFMediaCommon
No Necessity Media. %n %1 %n %2
This medium does not need to be rebuilt.
There is no particular problem.
53640 FFMediaCommon
Not Dicomdir Struct. %n %1 %n %2
The specified path does not have a DICOM There is no particular problem. structure.
53641 FFMediaCommon
Not Found Mediauid. %n %1 %n %2
The media UID cannot be acquired.
Reconstruct the media.
53642 FFMediaCommon
Not Found Label. %n %1 %n %2
The label name cannot be acquired.
With the Service Utility, check the disk drive settings.
53643 FFMediaCommon
Process Busy. %n %1 %n %2
Rebuilding is in progress.
With the Service Utility, check the disk drive settings.
53644 FFMediaCommon
Media Exchange. %n %1 %n %2
The medium is changed.
With the Service Utility, check the disk drive settings.
53645 FFMediaCommon
Record Not Exist. %n %1 %n %2
The specified record was not found.
With the Service Utility, check the disk drive settings.
53646 FFMediaCommon
Error Image Exist. %n %1 %n %2
A certain image was not successfully acquired.
There is no particular problem.
53647 FFMediaCommon
Registration failure to DB. %n %1 %n %2
A record was not successfully registered in There is no particular problem. the database.
53648 FFMediaCommon
Set Default by acquisition failure. %n %1 %n %2
Since the setting information could not be With the Service Utility, check whether the acquired, the default information was used. network settings are correct.
53649 FFMediaCommon
The Same Label Exists. %n %1 %n %2
An existing medium has a label having the same name.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
The DICOM image information was not successfully accessed.
Confirm the situation in which the error occurred, obtain the maintenance log with the Backup Utility, and send the maintenance log and an error report to the manufacturer.
54802 FFCustomMsgBox
[54802] Do you wish to output this layout as is?
Nothing particular.
54803 FFCustomMsgBox
[54803] Do you close a free layout screen?
Nothing particular.
54815 FreeLayout Communicator
HobbitIF.CheckImage() failed. file=··· result=···
54850 FFCustomMsgBox
[54850] Changing the layout will result in loss of some images.
Free layout has been selected for an abnormal image (picture failure/deleted image etc.).
Remarks
There is no operational problem (select study of a picture failure/deleted image etc. and not free layout). Nothing particular.
+Do you want to continue? 54851 FFCustomMsgBox
[54851] Do you wish to change the film direction?
Nothing particular.
54852 FFCustomMsgBox
[54852] This cell has already contained an image.
Nothing particular.
+Do you want to replace that image? 54853 FFCustomMsgBox
[54853] The selected image will be deleted.
Nothing particular.
+Do you want to continue?
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-323
Appx MT 1-324 Event
Event Source
54854 FFCustomMsgBox
Description
Causes
[54854] Images being laid out will be all deleted.
Remedies
Remarks
Nothing particular.
+Do you want to continue? 54857 FFCustomMsgBox
[54857] The format will be deleted.
Nothing particular.
+Do you want to continue? 54859 FFCustomMsgBox
[54859] Film size will be changed.
Nothing particular.
+Do you want to continue? 54860 FFCustomMsgBox
[54860] The maximum number of The number of displayable characters has been exceeded with footer information displayable characters has been exceeded. Certain area cannot be setting at the free layout print screen. displayed.
When the existence of not displayable characters is possible, click [OK], otherwise click [Cancel].
+Do you want to continue? 54871 FFCustomMsgBox
Nothing particular.
[54871] Images of multiple patients will be laid out. +Do you want to continue?
55847 FreeLayoutLauncher ErrorCode:%1%n Occurrence of an exception error at the time of start of the free layout screen SubSystem:%2%n SourceFile: %3%n SpotCode: %4%n The error at the time of start of the freelayout screen.\n
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
55848 FreeLayoutLauncher ErrorCode:%1%n Invalid program error at the time of start of SubSystem:%2%n the free layout screen SourceFile: %3%n SpotCode: %4%n The error at the time of start of the freelayout screen.\n
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
55849 FreeLayoutLauncher ErrorCode:%1%n File access error at the time of start of the SubSystem:%2%n free layout screen SourceFile: %3%n SpotCode: %4%n The error at the time of start of the freelayout screen.\n
Restart the server application and client application. If the same error recurs, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
57601 OutImgPrc
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
020-221-02E 01.08.2010 FM5563
DDO data(0x0007,0xF815) are not data to set in an input image format
A program error occurred.
CR-IR 391CL Service Manual
Appx MT 1-324
Appx MT 1-325 Event
Event Source
Description
Causes
Remedies
57602 OutImgPrc
Transfer sentence Get Error. < SetInputOutputImageType
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
57603 OutImgPrc
JOBFile data(0x1000,0x0021) are A program error occurred. not data to set in output image format
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
57604 OutImgPrc
Catch some other Exception < COutImgPrc:: SetInputOutputImageType
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
57605 OutImgPrc
DDO File Reset Error
A program error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
60000 FFCustomMsgBox
Failed in accessing the database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60002 FFCustomMsgBox
User Utility will be terminated.
An abnormality is encountered. There is no Restart. If the same symptom recurs, alternative but to exit the program. perform a reinstallation.
60003 FFCustomMsgBox
The system cannot be started because the server application has already been up and running.
60004 FFCustomMsgBox
The system cannot be started because the Service Utility has already been up and running.
60005 FFCustomMsgBox
The system cannot be started because the Service Utility has already been up and running.
60006 FFCustomMsgBox
The system cannot be started because the Service Utility has already been up and running.
60007 FFCustomMsgBox
An error occurred during user authentication processing.
60008 FFCustomMsgBox
An error occurred during user authentication processing.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-325
Appx MT 1-326 Event
Event Source
Description
Causes
60050 FFCustomMsgBox
Failed in accessing the character string database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60051 FFCustomMsgBox
Failed in accessing the system setting database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60052 FFCustomMsgBox
Failed in obtaining the registry information.
It is conceivable that the registry information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60053 FFCustomMsgBox
Acquisition of optional information It is conceivable that the registry resulted in a failure. information was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60054 FFCustomMsgBox
Failed in obtaining the information It is conceivable that the database file was from the character string damaged or deleted. database.
Restart. If the same symptom recurs, perform a reinstallation.
60055 FFCustomMsgBox
Failed in information acquisition from the system setting database
Restart. If the same symptom recurs, perform a reinstallation.
60056 FFCustomMsgBox
Failed in obtaining the information The setup file format was incorrect or the from the system setting file. file could not be read.
Check settings.
60057 FFCustomMsgBox
Failed in setting information to the The setup file format was incorrect or the system setting file. file could not be read.
Check settings.
60058 FFCustomMsgBox
An attempt to write system setup information resulted in a failure.
60060 FFCustomMsgBox
An attempt to access the connection device database resulted in a failure.
60061 FFCustomMsgBox
An attempt to acquire information from the connection device database.
60062 FFCustomMsgBox
An attempt to write necessary data in the connection device database resulted in a failure.
60081 FFCustomMsgBox
Acquisition of menu information failed.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60100 FFCustomMsgBox
Failed in obtaining the MPM code. It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60114
FFCustomMsgBox
Failed in obtaining the XCON parameter.
Restart. If the same symptom recurs, perform a reinstallation.
60115
FFCustomMsgBox
An error of unknown cause occurred.
60120 FFCustomMsgBox
Disk consistency check resulted in a failure.
60121 FFCustomMsgBox
Import of patient information resulted in a failure.
020-221-02E 01.08.2010 FM5563
It is conceivable that the database file was damaged or deleted.
It is conceivable that the database file was damaged or deleted.
Remedies
CR-IR 391CL Service Manual
Remarks
Appx MT 1-326
Appx MT 1-327 Event
Event Source
60130 FFCustomMsgBox
Description [60130] Failed in accessing the preset setting database.
Causes A problem has occurred for the database (SQL-Server).
Restart the server application and client application. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
A problem has occurred for the database (SQL-Server).
Restart the server application and client application. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
*Contact your service engineer. +Press the button below to finish the system. 60131 FFCustomMsgBox
[60131] Failed in operation of the preset information. The following reason is presumable. 1. Database access error
Remedies
*Restart the server computer. >Contact your service engineer if restarting of the computer does not resolve the problem. 60203 FFCustomMsgBox
Failed in accessing the requesting It is conceivable that the database file was department database. damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60205 FFCustomMsgBox
Failed in information acquisition from the system setting database
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60215 FFCustomMsgBox
Failed in accessing the film annotation database.
It is conceivable that the database file was damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
60220 FFCustomMsgBox
Failed in reading marker images.
A marker which cannot be displayed exists Confirm the contents of the image data existing in the following folder and make on the marker setting window of the user sure that there are no broken image data. utility. C:\ProgramData\FujiFilm\Hobbit\ UserMarker
60221 FFCustomMsgBox
Failed in reading additional images.
Addition of a user marker failed on the marker setting window of the user utility.
60251 FFCustomMsgBox
The data for image processing parameter is invalid.
60260 FFCustomMsgBox
The CR-IR 391CL system has not The CR-IR 391CL executable file might be been rebooted. damaged or deleted.
60261 FFCustomMsgBox
An error occurred when creating a distribution file.
60262 FFCustomMsgBox
An error occurred when creating a distribution file.
60263 FFCustomMsgBox
An error occurred when creating a distribution file.
60264 FFCustomMsgBox
An error occurred when decompressing a CAB format file for distribution.
60300 FFCustomMsgBox
Failed in accessing the database.
020-221-02E 01.08.2010 FM5563
Remarks
Confirm that the image data of the image which could not be added are supported (only BMP type). Create the image data again and retry.
Reinstall the system.
CR-IR 391CL Service Manual
Appx MT 1-327
Appx MT 1-328 Event
Event Source
Description
Causes
Remedies
60300 FFUdfFmtTool
Illegal parameter.
Parameter is illegal.
System settings may have been performed improperly. Check the system settings and retry processing.
60301 FFUdfFmtTool
The error occurred in the UDF library.
An error occurred in the UDF library.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
60302 FFUdfFmtTool
Program error. … Specified drive can not use.
The specified drive cannot be used.
System settings may have been performed improperly. Check the system settings and retry processing.
60302 FFUdfFmtTool
Program error. … Media have not been inserted.
No media have been inserted into drive.
No media have been inserted into drive. Insert media to be formatted, into drive. Then, retry formatting.
60302 FFUdfFmtTool
Program error. … Sequence error.
A sequence error occurred.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
60303 FFUdfFmtTool
Exception error.
An exceptional error occurred during disk format processing.
Restart the server application and client application. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
60307 FFCustomMsgBox
An error occurred during user authentication processing.
60308 FFCustomMsgBox
An error occurred during user authentication processing.
60313 FFCustomMsgBox
The system cannot be started because the server application has already been up and running.
Exit the server application, and then retry.
60314 FFCustomMsgBox
The system cannot be started because the User Utility has already been up and running.
Exit the User Utility, and then retry.
60315 FFCustomMsgBox
The system cannot be started because the Service Utility has already been up and running.
Exit the server application, and then retry.
60316 FFCustomMsgBox
The system cannot be started because the Backup Utility has already been up and running.
Exit the Backup Utility, and then retry.
60320 FFCustomMsgBox
Failed in accessing the character string database.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Remarks
Appx MT 1-328
Appx MT 1-329 Event
Event Source
Description
60321 FFCustomMsgBox
Failed in accessing the system setting database.
60322 FFCustomMsgBox
Failed in obtaining the registry information.
60323 FFCustomMsgBox
An attempt to access the connection device setup database resulted in a failure.
60325 FFCustomMsgBox
Failed in information acquisition from the system setting database
60326 FFCustomMsgBox
Failed in obtaining the information from the system setting file.
60329 FFCustomMsgBox
Database optimization resulted in a failure.
60351 FFCustomMsgBox
Data backup processing was disabled.
60352 FFCustomMsgBox
Data backup processing failed.
60360 FFCustomMsgBox
Creation of a work folder resulted in a failure.
60361 FFCustomMsgBox
An attempt to delete a work folder resulted in a failure.
60370 FFCustomMsgBox
An attempt to acquire information from the list of files targeted for backup processing resulted in a failure.
60371 FFCustomMsgBox
Decompression of a CAB format file resulted in a failure.
60372 FFCustomMsgBox
An attempt to acquire information from the backup version file resulted in a failure.
60382 FFCustomMsgBox
Format processing failed.
60383 FFCustomMsgBox
Failed in obtaining the button image (Urgent button).
60384 FFCustomMsgBox
[60384] Monitor model could not be added. *Check the content of LUT Information File.
60385 FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
[60385] %s
Causes
Remedies
Remarks
● Contact your service engineer.
The contents of the LUT information file may be wrong or destroyed.
• Change the LUT information file and try again. • If the situation does not improve or in case of reoccurrence, confirm the occurrence situation and send the event log and the LUT information file to the manufacturer.
An error with unknown cause has occurred Confirm the occurrence situation and send at the service utility monitor type selection the contents listed after the number and the window. event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-329
Appx MT 1-330 Event
Event Source
60385 ServiceUtility
60385 ServiceUtility
60385 ServiceUtility
60385 ServiceUtility
60385 ServiceUtility
60385 ServiceUtility
60385 ServiceUtility
020-221-02E 01.08.2010 FM5563
Description
Causes
Remedies
Remarks
Insufficient number of elements: ··· The number of lut.txt elements is not (MonitorID: ···) sufficient.
Confirm that the lut.txt listing is correct. If the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Invalid Monitor ID: ··· Incorrect monitor ID information has been Confirm that the lut.txt listing is correct. If (MonitorID: ···) read in. the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Invalid LUT ID: ··· Incorrect LUTID information has been read Confirm that the lut.txt listing is correct. If (MonitorID: ···) in. the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Invalid LUT Interpretation: ··· Incorrect LUT color space information has Confirm that the lut.txt listing is correct. If (MonitorID: ···) been read in. the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. The last LUT Interpretation is The LUT color space information is not Confirm that the lut.txt listing is correct. If complemented: ··· sufficient. the same error occurs with correct listing, (MonitorID: ···) perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. The monitor name is already used: An already existing monitor name has been Confirm that the lut.txt listing is correct. If ··· read in. the same error occurs with correct listing, (MonitorID: ···) perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. LUT Interpretation is The LUT color space has not been Confirm that the lut.txt listing is correct. If complemented: ··· specified. the same error occurs with correct listing, (MonitorID: ···) perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-330
Appx MT 1-331 Event
Event Source
Description
Causes
Remedies
60385 ServiceUtility
No LUT file specified: ··· (MonitorID: ···)
60390 FFCustomMsgBox
An attempt to delete target logs failed.
60401 FFCustomMsgBox
Data restoring failed.
60402 FFCustomMsgBox
Data restoring failed.
60410 FFCustomMsgBox
Creation of a work folder resulted in a failure.
60411
FFCustomMsgBox
An attempt to delete a work folder resulted in a failure.
60420 FFCustomMsgBox
An attempt to acquire information from the list of files targeted for backup processing resulted in a failure.
60421 FFCustomMsgBox
Decompression of a CAB format file failed.
60426 FFCustomMsgBox
File restore is not possible because no backup information file exists.
Check the backup file, and then retry.
60427 FFCustomMsgBox
The backup information file is illegal.
Check the backup file, and then retry.
60429 FFCustomMsgBox
The type of application used for the backup information file is different from that used for the system that is currently up and running.
Check the backup file, and then retry.
60430 FFCustomMsgBox
The software version used is different and is not compatible with the backed up file.
60451 FFCustomMsgBox
Collection of logs for maintenance purposes was disabled.
60452 FFCustomMsgBox
Log collection for maintenance purposes resulted in a failure.
60460 FFCustomMsgBox
Creation of a work folder resulted in a failure.
60470 FFCustomMsgBox
An attempt to acquire information from the list of files targeted for backup processing resulted in a failure.
020-221-02E 01.08.2010 FM5563
The LUT file does not exist.
Remarks
Confirm that the lut.txt listing is correct. If the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
● Contact your service engineer.
● Contact your service engineer.
CR-IR 391CL Service Manual
Appx MT 1-331
Appx MT 1-332 Event
Event Source
Description
60471 FFCustomMsgBox
Decompression of a CAB format file failed.
60482 FFCustomMsgBox
Format processing failed.
60483 FFCustomMsgBox
An attempt to update the volume label of backup disk failed.
Causes
Remedies
Remarks
An attempt to update the volume label failed.
60495 FFCustomMessageBox An error occurred.
Startup of Notepad failed.
Retry Notepad startup. If the condition does not improve, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
60496 FFCustomMessageBox An error occurred.
Creation of README.TXT failed.
Retry README.TXT creation. If the condition does not improve, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
60520 FFCustomMsgBox
Acquisition of the number of registered items has failed.
It is conceivable that the database file was damaged or deleted.
When “Private information is not deleted” is selected, handle the collected logs carefully because they contain private information.
60521 FFCustomMsgBox
An error has occurred. Error Code: %s
The personal information deletion process was not successfully performed.
Obtain the maintenance log, and send the %s: Code that shows error details. maintenance log and the encountered error Private information is not included in code (%s) to the manufacturer. created “Backup.ini”, “MAINTENANCE. cab” and “Study.txt”.
60522 FFCustomMsgBox
Output of study information has failed.
The study information for presentation was not successfully output. It is conceivable that the database file was damaged or deleted.
Confirm the situation in which the error occurred, and submit the obtained maintenance log and an error report to the manufacturer.
60600 FFCustomMsgBox
Failed in accessing the system setup database.
60601 FFCustomMsgBox
An attempt to write system setup information resulted in a failure.
60602 FFCustomMsgBox
Database Update Error. An attempt to acquire connection device setup information resulted in a failure.
An attempt to acquire connection equipment setup information.
60603 FFCustomMsgBox
Database Update Error. An attempt to write person name setup information resulted in a failure.
An attempt to write connection equipment setup information.
60604 FFCustomMsgBox
No available LUT files are found.
60605 FFCustomMsgBox
Free space available on the disk targeted for data storage is insufficient.
60606 FFCustomMsgBox
Database Access Error.
020-221-02E 01.08.2010 FM5563
An attempt to acquire character string information resulted in a failure.
CR-IR 391CL Service Manual
Appx MT 1-332
Appx MT 1-333 Event
Event Source
Description
Causes
60607 FFCustomMsgBox
Database Access Error. An attempt to acquire values from the An attempt to acquire values from database resulted in a failure. the database resulted in a failure.
60608 FFCustomMsgBox
Database Update Error. An attempt to write data in the database resulted in a failure.
60609 FFCustomMsgBox
An exceptional error occurred.
60610 FFCustomMsgBox
An error occurred during termination processing.
60611
Settings for services to be distributed resulted in a failure.
FFCustomMsgBox
60620 FFCustomMsgBox
Failed in accsessing the file.
60623 FFCustomMsgBox
A SQL error occurred.
60624 FFCustomMsgBox
An exceptional error occurred.
60625 FFCustomMsgBox
Failed in obtaining the registry information.
60626 FFCustomMsgBox
Necessary files do not exist.
60627 FFCustomMsgBox
Initialization of the patient database failed.
60628 FFCustomMsgBox
Initialization of the output queue failed.
60629 FFCustomMsgBox
[60629] Initialization of the preset database failed.
Remarks
Writing of the database failed.
A problem has occurred for the database (SQL-Server).
*Contact your service engineer. 60630 FFCustomMsgBox
Initialization of the image database failed.
60631 FFCustomMsgBox
An attempt to acquire information of how many times the IP was subjected to X-ray exposure resulted in a failure.
Acquisition of information on the IP exposure count failed.
60632 FFCustomMsgBox
An attempt to delete information of how many times the IP was subjected to X-ray exposure resulted in a failure.
Deletion of information on the IP exposure count failed.
60640 FFCustomMsgBox
An attempt to copy the EDR backup data file resulted in a failure.
60641 FFCustomMsgBox
The selected EDR backup data file cannot be found.
020-221-02E 01.08.2010 FM5563
Remedies
Restart the server application and client application. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-333
Appx MT 1-334 Event
Event Source
Description
Causes
Remedies
60642 FFCustomMsgBox
Generation of film annotation characters failed.
60643 FFCustomMsgBox
Generation of film annotation characters failed.
60644 FFCustomMsgBox
An attempt to automatically generate a film format definition file resulted in a failure.
60713 FFCustomMsgBox
Next window could not be displayed.
The next window could not be displayed.
60714 FFCustomMsgBox
Previous window could not be displayed.
The previous window could not be opened. Restart. If the same symptom recurs, update the startup folder (refer to Event 60721) and perform setup from the Service Utility.
60715 FFCustomMsgBox
The window could not be displayed.
The window could not be opened when the Restart. If the same symptom recurs, installation wizard was started. update the startup folder (refer to Event 60721) and perform setup from the Service Utility.
60716 FFCustomMsgBox
Failed in acquiring the Start status.
The status of the installation wizard could not be acquired from the registry.
60717 FFCustomMsgBox
Failed in acquiring the data.
The system setup database file or network Restart. If the same symptom recurs, setup database file might be damaged or perform a reinstallation. deleted.
60718 FFCustomMsgBox
Failed in storing the values set.
The system setup database file or network Restart. If the same symptom recurs, perform a reinstallation. setup database file was not successfully updated. This error is attributable to database file alteration during installation wizard execution or a database file abnormality.
60719 FFCustomMsgBox
Failed in storing the End status.
The end status of the installation wizard could not be stored.
60720 FFCustomMsgBox
Failed in updating the setting files. An error occurred when an attempt was made to create a distribution file.
020-221-02E 01.08.2010 FM5563
Remarks
Restart. If the same symptom recurs, update the startup folder (refer to Event 60721) and perform setup from the Service Utility.
Restart. If the same symptom recurs, update the startup folder (refer to Event 60721) and perform setup from the Service Utility.
An unexpected window may open the next time the installation wizard is started. Perform a reinstallation. Restart and then perform setup again. If the same symptom recurs, change the startup folder (refer to Event 60721) and perform setup from the Service Utility.
CR-IR 391CL Service Manual
Appx MT 1-334
Appx MT 1-335 Event
Event Source
Description
Causes
Remedies
Remarks
60721 FFCustomMsgBox
Failed in updating the settings for automatic startup.
The startup folder could not be updated.
Change the contents of the “C:\Users\ Fujicr\AppData\Roaming\Microsoft\ Windows\Start Menu\Programs\Startup” folder as directed below: Delete the shortcut file named “SetWiz.” Copy and paste the shortcut file named “FCR” from “C:\Users\Public\Public Desktop.”
Check for a remaining floppy disk or CD in the PC.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Refer to the detailed information and %1=Error Code: The code that uniquely determine the file status that resulted in the identifies an error. error. If the file is normal, abort the %2=Subsystem: The subsystem where an installation wizard and then restart the PC. error occurred. If the same symptom recurs, perform a %3=Source File: The program file where reinstallation. an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
The check sheet file (C:\ProgramData\ FujiFilm\Hobbit\Config\SetwizCheckSheet. txt) could not be created.
Abort the installation wizard and then This error is not used. restart the PC. If the same symptom recurs, perform a reinstallation. If the check sheet file is not needed, it is not necessary to take remedial action.
A character string was not successfully acquired from the character string database. The database file might be damaged or deleted.
Abort the installation wizard and restart the %1=Error Code: The code that uniquely PC. If the same symptom recurs, perform a identifies an error. reinstallation. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
The system setup database file or network Restart. If the same symptom recurs, setup database file was not successfully perform a reinstallation. updated. This error is attributable to database file alteration during installation wizard execution or a database file abnormality.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
The settings were not successfully acquired or updated.
Abort the installation wizard and then restart the PC. If the same symptom recurs, change the startup folder (see Event 60721) and perform setup from the Service Utility.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
It is conceivable that the registry information about the option key or application key is damaged or deleted.
Restart. If the same symptom recurs, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Abort the installation wizard and then restart the PC. If the same symptom recurs, change the startup folder (see Event 60721) and perform setup from the Service Utility.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
The check sheet file (C:\ProgramData\ FujiFilm\Hobbit\Config\SetwizCheckSheet. txt) could not be displayed.
Manually open the file indicated at left. This error is not used. If you cannot open the file, restart. If the same symptom recurs, perform a reinstallation. If the check sheet file is not needed, it is not necessary to take remedial action.
Abort the installation wizard and restart the %1=Error Code: The code that uniquely PC. If the same symptom recurs, perform a identifies an error. reinstallation. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
An error occurred when an attempt was made to start or exit the application.
Abort the installation wizard and then restart the PC. If the same symptom recurs, change the startup folder (see Event 60721) and perform setup from the Service Utility.
61060 FFCustomMsgBox
Password entered is incorrect.
An incorrect password was entered.
The password is fixed at “1111.”
61082 FFCustomMsgBox
No menu has been selected.
An attempt was made to perform an edit or Make a menu selection before performing other operation without making a menu an edit or other operation. selection.
61083 FFCustomMsgBox
Already registered for displaying and cannot be deleted.
The menu could not be deleted because it was registered for display.
Clear the registration for display and then delete the menu.
61084 FFCustomMsgBox
It is registered with the study menu. It cannot be deleted.
The menu cannot be deleted because it is registered in the study menu.
Delete the menu from the study menu, and then retry.
61085 FFCustomMsgBox
A display group with no menus registered for displaying exists.
61093 FFCustomMsgBox
Display group will be deleted.
This window opens for confirmation only.
61094 FFCustomMsgBox
Display group name is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61103
Same extension menu code already exists.
The entered data value was already registered or otherwise unacceptable.
Input another extension menu code.
FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Appx MT 1-337
Appx MT 1-338 Event
Event Source
Description
Causes
Remedies
61106
FFCustomMsgBox
Same exposure menu name already exists.
61109
FFCustomMsgBox
Same kanji-exposure menu name The entered data value was already already exists. registered or otherwise unacceptable.
Input another kanji-exposure menu name.
61110
FFCustomMsgBox
Extension menu code is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61111
FFCustomMsgBox
Study menu code is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61112
FFCustomMsgBox
Kanji-exposure menu name is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61122
FFCustomMsgBox
MPM code is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61125
FFCustomMsgBox
Same film annotation already exists.
The entered data value was already registered or otherwise unacceptable.
Input another film annotation.
61130
FFCustomMsgBox
Manufacturer/Equipment Code is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61131
FFCustomMsgBox
Film-related code is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61132
FFCustomMsgBox
Auto. Exp. Control is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61142
FFCustomMsgBox
Same study menu code already exists.
The entered data value was already registered or otherwise unacceptable.
Input another study menu code.
61149
FFCustomMsgBox
No exposure menu has been selected.
An attempt was made to perform an edit or Select a menu and then perform edit other operation without making a menu processing. selection.
61151
FFCustomMsgBox
Exposure menu cannot be registered.
The maximum permissible number of menu Delete any unnecessary menu. registrations was exceeded.
61153
FFCustomMsgBox
Study menu code is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61154
FFCustomMsgBox
Study menu code is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
61155
FFCustomMsgBox
Kanji-study menu code is illegal.
The entered data was abnormal due, for instance, to its excessive length or the inclusion of an unacceptable character.
Make a proper entry.
020-221-02E 01.08.2010 FM5563
The entered data value was already registered or otherwise unacceptable.
Remarks
Input another ANK exposure menu.
CR-IR 391CL Service Manual
Appx MT 1-338
Appx MT 1-339 Event
Event Source
Description
Causes
Remedies
61156
FFCustomMsgBox
The energy subtraction menu An attempt was made to register the cannot be registered for the study energy subtraction menu in the study menu. menu.
The energy subtraction menu cannot be incorporated in the study menu.
61160
FFCustomMsgBox
No direction of columns has been input.
Input the direction of columns.
61161
FFCustomMsgBox
No direction of rows has been input.
Input direction of rows.
61170
FFCustomMsgBox
Because modality is different, it can’t be registered for the study menu.
61171
FFCustomMsgBox
No technician code has been input.
An attempt was made to register data with an input field left blank.
Enter a value.
61211
FFCustomMsgBox
No film annotation characters have been input.
An attempt was made to register data with an input field left blank.
Enter a value.
61212 FFCustomMsgBox
Film annotation characters are too The entered data was too long. long.
61213 FFCustomMsgBox
Invalid characters have been input An unacceptable character was contained. Make a proper entry. in the film annotation characters.
61214 FFCustomMsgBox
Same film annotation already exists.
61260 FFCustomMsgBox
Acquisition of path information failed.
61270 FFCustomMsgBox
Already registered for the default menu and cannot be deleted
61280 FFCustomMsgBox
No Coding Scheme Designator has been input.
61281 FFCustomMsgBox
Coding Scheme Designator is too The entered data was too long. long.
61282 FFCustomMsgBox
Invalid characters have been input An unacceptable character was contained. Make a proper entry. in Coding Scheme Designator.
61290 FFCustomMsgBox
Patient information maintenance cannot be performed.
61291 FFCustomMsgBox
Set up again so that CR study images are stored on the image storage disk or printing film.
61302 FFCustomMsgBox
An error of unknown cause occurred.
61310 FFCustomMsgBox
No direction of columns has been input.
Input the direction of columns.
61313 FFCustomMsgBox
No direction of rows has been input.
Input direction of rows.
020-221-02E 01.08.2010 FM5563
Remarks
Make a proper entry.
The entered data value was already registered or otherwise unacceptable.
Input another film annotation.
Data is not input.
Input correctly. Make a proper entry.
The honorific title used is inappropriate.
CR-IR 391CL Service Manual
Appx MT 1-339
Appx MT 1-340 Event
Event Source
Description
Causes
Remedies
61328 FFCustomMsgBox
Because modality is different, it can’t be registered for the study menu.
61329 FFCustomMsgBox
It is registered for the DX parameter of the exposure menu. It can’t be deleted.
61400 FFCustomMsgBox
Content of the title of respect prefixed to a patient name is not appropriate.
61502 FFCustomMsgBox
The disk status is abnormal.
61505 FFCustomMsgBox
Sameness of the source and destination for copying data could not be verified.
61507 FFCustomMsgBox
An attempt to successfully finish copy processing resulted in a failure.
Retry.
61508 FFCustomMsgBox
The source drive for copying data has not been connected or does not exist.
● Confirm the connection of the source drive of diskcopy.
61509 FFCustomMsgBox
The destination drive for copying data has not been connected or does not exist.
● Confirm the connection of the source drive of diskcopy.
61510 FFCustomMsgBox
No format type has been specified for this drive.
Insert a formatted blank disk into the drive.
61511
FFCustomMsgBox
The setting of the source drive for copying data is incorrect.
Contact your service engineer.
61512 FFCustomMsgBox
The setting of the destination drive for copying data is incorrect.
Contact your service engineer.
61600 FFCustomMsgBox
It cannot be started because the same application has already been up and running.
61601 FFCustomMsgBox
It cannot be started because the server application has already been up and running.
61602 FFCustomMsgBox
It cannot be started because the User Utility has already been up and running.
61603 FFCustomMsgBox
It cannot be started because the Backup Utility has already been up and running.
61604 FFCustomMsgBox
No available LUT files are found.
020-221-02E 01.08.2010 FM5563
Remarks
To delete it, deregister it from the DX parameter. The honorific title is not input or characters Re-input correctly. that cannot be used are included.
CR-IR 391CL Service Manual
Appx MT 1-340
Appx MT 1-341 Event
Event Source
Description
Causes
Remedies
Remarks
61605 FFCustomMsgBox
Free space available on the disk targeted for data storage is insufficient.
61606 FFCustomMsgBox
There are no data that can be acquired.
61607 FFCustomMsgBox
Free space available on the disk targeted for data storage is insufficient.
61620 FFCustomMsgBox
Update processing is disabled because a serious error occurred.
61700 FFCustomMsgBox
The server application is up and running.
An attempt was made to start the installation wizard while the server application was running.
Exit the server application and then start the installation wizard.
61701 FFCustomMsgBox
The server application is up and running.
An attempt was made to start the installation wizard while the server application was running.
Exit the server application and then start the installation wizard.
61710 FFCustomMsgBox
No monitor models could be added.
The probable causes are as follows: Lut.txt is illegal or not found. The lut file is not found on the floppy disk. The lut file having the same name already exists on the PC.
If there is no problem with the floppy disk or lut file, exit the installation wizard and then correct the settings with the Service Utility.
61722 FFCustomMsgBox
This folder cannot be selected.
A control panel folder or other nonselectable folder was selected.
Check for a remaining floppy disk or CD in the PC.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Manually adjust the window position/size. If you feel uncomfortable, perform a reinstallation.
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-341
Appx MT 1-342 Event
Event Source
Description
Causes
Remedies
62200 FFCustomMsgBox
Size of the image to be registered The size of the image to be registered to a to marker is larger than marker exceeds 1000 x 1000 pixels. 1000x1000pixel. This warning message is displayed when 1000 pixels are exceeded in horizontal or vertical direction.
62201 FFCustomMsgBox
Total number of marker images registered exceeds the number allowed by the System Setting.
62523 LogUpload
An attempt to find log files to be collected ErrorCode: 26002523 resulted in a failure. SubSystem: LogFileUpload FileName: LogUpload.exe SpotCode: 523 ErrorMessage: The failure of pass acquisition
When the client application can be started: If the same error occurs every time the client application is started, manually collect event logs of the client PC, and then contact the manufacturer. When the client application is disabled to start: Check to see that the server application is up and running. Check also to see that the host name of the server PC determined to be target for link of the shortcut icon is correct. If the same problem recurs, contact the manufacturer.
62524 LogUpload
ErrorCode: 26002524 SubSystem: LogFileUpload FileName: LogUpload.exe SpotCode: 524 ErrorMessage: The failure of making temporary folder
Creation of the operation folder failed. The program may possibly be defective.
If this same error occurs every time the client application is started, manually collect event logs of the client PC, and then contact the manufacturer.
62525 LogUpload
ErrorCode: 26002525 SubSystem: LogFileUpload FileName: LogUpload.exe SpotCode: 525 ErrorMessage: The failure of file movement
It was not possible to collect log files of the client PC. An attempt to find log files to be collected resulted in a failure or another program is being used.
If the same error occurs every time the client application is started, manually collect event logs of the client PC, and then contact manufacturer.
62526 LogUpload
ErrorCode: 26002526 SubSystem: LogFileUpload FileName: LogUpload.exe SpotCode: 526 ErrorMessage: The failure of file compression
An attempt to compress a file resulted in a If the same error occurs every time the failure. client application is started, manually Collection of log files may have been failed. collect event logs of the client PC, and then contact manufacturer.
020-221-02E 01.08.2010 FM5563
Remarks
Change the image size to 1000 x 1000 pixels or less and try again.
The number of user marker registrations Delete registered user markers and exceeds the system set value (default: 50). register again. Change the following system set value of the service utility. 15-5: Max. number of marker registrations (max. 128)
CR-IR 391CL Service Manual
Appx MT 1-342
Appx MT 1-343 Event
Event Source
Description
Causes
Remedies
62527 LogUpload
ErrorCode: 26002527 SubSystem: LogFileUpload FileName: LogUpload.exe SpotCode: 527 ErrorMessage: The failure of file upload
File upload failed.
Check to see that the server application is up and running. Check also to see that the host name of the server PC determined to be target for link of the shortcut icon is correct. If the same error occurs every time the client application is started, manually collect event logs of the client PC, and then contact manufacturer.
62528 LogUpload
ErrorCode: 26002528 SubSystem: LogFileUpload FileName: LogUpload.exe SpotCode: 528 ErrorMessage: The failure of Capsula client application start
It was not possible to start up the client application.
Check to see that the server application is up and running. Check also to see that the host name of the server PC determined to be target for link of the shortcut icon is correct. If the same problem recurs, contact the manufacturer.
62529 LogUpload
ErrorCode: 26002529 SubSystem: LogFileUpload FileName: LogUpload.exe SpotCode: 529 ErrorMessage: The failure of LogUpload.exe start
It was not possible to start up the LogUpload.exe file.
Restart the OS. If the same error recurs, contact the manufacturer.
62657 FFCustomMsgBox
Settings for the server computer has not been finished. Image Link cannot be set up.
● Perform settings for the server computer.
62666 FFCustomMsgBox
[62666] Preset database is initialized.
Nothing particular.
Remarks
+Are you sure? 62670 FFCustomMsgBox
Folder used by the system cannot be specified.
● Specify another folder.
62671 FFCustomMsgBox
The folder path has already been set up for another purpose.
● Specify another folder.
62693 FFCustomMsgBox
Failed in drive setting of the client PC.
Disk operation (change, removal) has failed with the client utility or with indicator disk setting. This error may be occurred when increasing client PCs.
62694 FFCustomMsgBox
020-221-02E 01.08.2010 FM5563
[62924] The setting of the selected Confirmation to delete the NAS setting. device will be deleted. +Are you sure?
Try again. If there is no improvement, check the network cable connection. If the above check does not result in improvement, review the client device settings of the service utility. If it is intended, click the OK button. If not, click the cancel button.
The font information was not successfully acquired.
Although displayed characters might %1=Error Code: The code that uniquely become displaced, there is no operational identifies an error. problem. If you feel uncomfortable, perform %2=Subsystem: The subsystem where an a reinstallation. error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
The operation log cannot be stored. %1=Error Code: The code that uniquely Restart. If the same error recurs, perform a identifies an error. reinstallation. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Although a displayed image may be abnormal due, for instance, to a grayed portion, there is no operational problem. If you feel uncomfortable, perform a reinstallation.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
%1=Error Code: The code that uniquely identifies an error. %2=Subsystem: The subsystem where an error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
Although images may be improperly %1=Error Code: The code that uniquely displayed, there is no operational problem. identifies an error. If you feel uncomfortable, perform a %2=Subsystem: The subsystem where an reinstallation. error occurred. %3=Source File: The program file where an error occurred. %4=Spot Code: The location where an error actually occurred (a unique value within the program). %5=Detailed information of an error (details of the cause, location of occurrence, reason of occurrence, and other)
64090 FFCustomMsgBox
[64090] Preset of the same name has already been registered.
Register an existing preset name at the user utility window.
Change the preset name and then retry the operation.
*Change the preset name and then re-execute. 64200 FFCustomMsgBox
Markers selected will be deleted.
This confirmation dialog is displayed when marker deletion has been specified with marker setting of the user utility.
64310 FFUdfFmtTool
Complete format.
File formatting was completed normally.
64612 FFCustomMsgBox
[64612] Initialization of the Preset Database has been completed.
Nothing particular.
67053 SetWiz
Exceptional error (message output Instance generation processing has failed. by OS).
67056 SetWiz
Exceptional error (message output A program error occurred. by OS).
67060 SetWiz
Invalid moniter ID : ··· (MonitorID : ···)
Restart the installation wizard. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Restart the installation wizard. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Confirm that the lut.txt listing is correct. If the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
Incorrect LUT color space information has been read in.
67060 SetWiz
Exceptional error (message output A program error occurred. by OS).
100000 FFCustomMsgBox
A study to which no exclusive registration is possible exists.
100002 FFCustomMsgBox
Exclusive registration is not possible.
100003 FFCustomMsgBox
System logoff
100004 FFCustomMsgBox
System is shut down.
020-221-02E 01.08.2010 FM5563
Remedies
Remarks
Confirm that the lut.txt listing is correct. If the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Confirm that the lut.txt listing is correct. If the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Confirm that the lut.txt listing is correct. If the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Confirm that the lut.txt listing is correct. If the same error occurs with correct listing, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer. Restart the installation wizard. If the same error recurs, perform a reinstallation. If the reinstallation does not help, confirm the situation in which the error occurred, and submit the event log to the manufacturer.
CR-IR 391CL Service Manual
Appx MT 1-346
Appx MT 1-347 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-347
Appx MT 1-348 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MT 1-348
MC-I
CR-IR 391CL Service Manual
MC: Checks, Replacement and Adjustment of Parts
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-I
MC-II Control Sheet Issue date
Revision number
04/28/2009 01/08/2010
01 02
Reason New release (FM5535) Revision for software V1.1(B) (FM5563)
Changes in pagination (FM5563)
020-221-02E 01.08.2010 FM5563
Pages affected All pages 3, 30, 31, 33, 35, 36, 38 to 42, 44, 58 to 61, 63, 64, 68, 69, 72 to 74, 77, 79, 89, 90, Appx MC 2-2, 3, 3-1, 4-1, 5-3, 4, 8, 6-1, 6, 8-1, 9-1 to 4 43, 45 to 57, 62, 65 to 67, 70, 71, 75, 76, 78, 80 to 88
CR-IR 391CL Service Manual
MC-II
MC-1
1. Reinstalling the OS and the Application
1.1 Installation Flowchart (DELL PC) Presented below is the procedure used for installing the CR-IR 391CL-AP from the OS. Follow the flowchart to install the CR-IR 391CL. 1.2 Preparation 1.3 Installing and Setting Up the OS 1.4 Setting the Network 1.5 RU Settings 1.6 Installing the SQL Server 1.7 Installing the CR-IR 391CL Software 1.8 Settings by the Simplified Setup Wizard 1.9 IIS Network Virus Protection 1.10 Making Checks Using the Service Utility 1.11 Restoring the CR-IR 391CL Config Data 1.12 Operation Check and Initialization after Installation 1.13 Restoring the CR-IR 391CL Configuration Data (patient information) 1.14 Reconstructing the Image Database
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-1
MC-2 4.
1.2 Preparation ■ Backing up images
NOTE
Make a backup copy of images in advance.
The setting of the button display style cannot be saved by setting-backup operation. It is necessary to be set up manually after reinstallation.
■ Reviewing the current CR-IR 391CL settings
1.
Display the “Display Style Settings” tab by selecting it, and view the display style currently selected and take a note of it.
With a study being selected on the Study List window, click “Image Viewer.” ➔ The Image Viewer window opens.
2.
Right-click in the middle portion of the window (anywhere on the image). ➔ The right-click menu opens.
MC000158.ai
■ Making a backup using the Backup Utility MC000157.ai
3.
From the right-click menu, select [Toolbar Settings] - [Toolbar Settings].
Make a backup copy of patient information, setup information, and log information. For information on how to make a backup using the Backup Utility, see “Appendix 1: Backup Utility” under “MU: Maintenance Utility.”
➔ The “Toolbar Settings” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-2
MC-3 1.3 Installing and Setting Up the OS
1.3.1 Installing and Setting Windows Vista
NOTE
This section describes how to install Windows Vista.
When reinstalling the OS, do not connect mouse and keyboard to the adjacent USB ports. After the completion of OS reinstallation processing, reconnect mouse and keyboard to the specified USB ports. An attempt to reinstall the OS, with its mouse and keyboard connected to the adjacent USB ports, may cause keyboard entries not to be recognized halfway through the OS reinstallation processing.
The OS is to be installed in the following situations:
This computer’s user settings (auto logon settings) Monitor settings
020-221-02E 01.08.2010 FM5563
C:\ C drive only (no other partitions will be created.) /NTFS Name FUJIFILM Corporation Organization FUJIFILM Corporation Indicated on the right-hand side of the PC main unit cover. The default settings when shipped from factory CR-IR 391CL: Computer name CVXXXXXXXX (XXXXXXXX: Eight-digit manufacture No.) * Take notes accordingly if changed. Password system Protocol used TCP/IP “172.16.1.20” when shipped from factory. IP address * Take notes accordingly if changed. “255.255.0.0” when shipped from factory. Subnet mask * Take notes accordingly if changed. Used by the work group. Domain or work group (The group name remains the default.) Automatically logged fujicr on username Password system Display color True Color (32-bit) 1280×1024 (17-inch LCD) Display area 1680×1050 (20-inch LCD)
After HDD replacement After an error occurrence in the OS Items to be readied for OS installation Windows Vista installation DVD (Dell Product Recovery DVD (Windows Vista) contained in the PC box.) Dell Resource DVD (A DVD that stores various drivers.)
IMPORTANT Before formatting the HDD, make backup copy of image data, if any, as required by the user. Make backup copy of config data (CR-IR 391CL, RU-Config) that stores various CR-IR 391CL and RU settings, ahead of time. When making a backup of the configuration data, check the version of the CR-IR 391CL’s application and take a note of it. Use the User Utility function to back up user setup information items (place checkmarks to all items).
NOTES If the PC is not connected via the network, the network setup windows will not be displayed while the OS is being installed. To perform network settings, be sure to connect the PC to the network (connection to the RU) accordingly before installation work. When HDD of a recommended PC model is replaced, check setup details ahead of time because the HDD may not be operated unless the PC’s BIOS settings are changed accordingly. Driver software installation may be required while Windows Vista is being installed. In such an instance, use the Dell Resource DVD to install it.
CR-IR 391CL Service Manual
MC-3
MC-4 Network connection between the CR-IR 391CL and the RU If the PC is not connected properly via the network in advance, the network setup windows will not be displayed while the OS is being installed, depending on the Windows Vista installer specifications. For details, see “3.4 Connecting a Cable Between the RU and Other Equipment” under “IN: Installation.”
1. 2.
Use a crossing cable to connect the CR-IR 391CL to the RU or use a network cable to connect the CR-IR 391CL to the HUB for network connection via the HUB.
Windows Vista installation ● Changing the boot menu setting and starting from the installation DVD
1.
Turn ON the monitor and PC power switches. ➔ The PC starts running.
2.
Press the key when “F12 Boot Options” appears at the upper right corner of the window.
NOTE If the key is not pressed with the timeliness, the setup window will not open. In such an instance, restart the PC to perform Step 2. above again.
Turn ON the power to the RU. For network connection via the HUB, the power can be left turned OFF.
➔ The “Boot Device Menu” window opens. Boot Device Menu
Onboard or USB Floppy Drive SATA0-ST3250310AS Onboard or USB CD-ROM Drive System Setup Diagnostics Use Up/Down arrows to highlight desired item. Use Enter to select highlighted item. MC000108.ai
3.
020-221-01E 04.28.2009 FM5535
Insert the “Windows Vista installation DVD” into the DVD drive.
CR-IR 391CL Service Manual
MC-4
MC-5 Select “ Onboard or USB CD-ROM Drive” using arrow keys, and press the key.
4.
6.
Select “My language is English”.
➔ The “Press any key to boot from CD or DVD.” message appears on the bottom of the window. Boot Device Menu
Onboard or USB Floppy Drive SATA0-ST3250310AS Onboard or USB CD-ROM Drive System Setup Diagnostics
AWV22001_E.ai
➔ The language selection window open.
Use Up/Down arrows to highlight desired item. Use Enter to select highlighted item.
7.
Make the following settings.
Press any key to boot from CD or DVD. MC000109.ai
5.
Press the key within three seconds. NOTE If you do not press the key within about three seconds after the “Press any key to boot from the CD or DVD” message appears on the bottom of the window, the installation DVD will not be recognized accordingly. If such a failure occurs, restart the PC to perform Step 2. to 4. again. ➔ After a while, the “Window Vista” window opens.
AWV22002_E.ai
Language to install
: English
Time and currency format : English (United States) Keyboard or input method : US
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-5
MC-6 8.
11. Select “Custom (advanced)”.
Click [Next] . The following window opens.
AWV22005_E.ai AWV22003_E.ai
9.
➔ The “Where do you want to install Windows?” window opens.
Click “Install now”. ➔ The “Please read the license terms” window opens.
12. Select “Drive options (advanced)”.
10. Place a checkmark to “I accept the license terms” and click [Next].
CBS03001.ai
AWV22004_E.ai
➔ The “Which type of installation do you want?” window opens.
15. Select “Disc 0 Partition 2 OS” and select “Delete”.
CBS03002.ai
➔ A confirmation window opens.
CBS03003.ai
➔ A confirmation window opens.
14. Click [OK].
16. Click [OK].
AWV22008_E.ai
➔ The system returns to the “Where do you want to install Windows?” window.
AWV22008_E.ai
➔ The system returns to the “Where do you want to install Windows?” window.
17. Click [Next]. ➔ The OS Installation processing starts.
020-221-01E 04.28.2009 FM5535
Upon completion of installation, the “Choose a user name and picture” window opens.
CR-IR 391CL Service Manual
MC-7
MC-8 3.
n Windows setup
1.
Make the following settings.
Enter “CVxxxxxxxx” in the “Type a computer name” field. (use upper-case characters to enter the “CV”. xxxxxxxx are for the CV serial number.)
CBS03005.ai
4.
Type a password (recommended)
: system
Retype your password
: system
Type a password hint
: fujicr
.
The “Help protect Windows automatically” window opens.
CBS03004.ai
Type a user name (for example, John) : fujicr
Click
5.
Select “Ask me later”.
NOTE The character string entries in the “Type a password (recommended):” and “ReType your password:” fields appear as “l”.
2.
Click
.
The “Type a Computer name and choose a desktop background” window opens.
020-221-01E 04.28.2009 FM5535
AWV22015_E.ai
The “Review your time and date settings” window opens.
CR-IR 391CL Service Manual
MC-8
MC-9 6.
Verify the “Time zone”, “Date” and “Time” and click . If the shown “Time zone”, “Date” and “Time” are not correct, change it as appropriate and click .
9.
Enter “system” and click
.
AWV32020.ai
NOTE The password appear as “l”. ➔ The desktop window opens. AWV22016_E.ai
The following window opens.
➥ REFERENCE If the “Welcome Center” window opens, close the “Welcome Center” window.
AWV22018_E.ai
7.
Click
.
After a while, the log-in window opens.
8.
Remove the “Operating System (for Re-Install)” DVD from the PC.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-9
MC-10 3.
n Setting the User Account Control
Select “User Accounts”.
Turn off and disable “User Account Control” from prompting for credentials to install applications, and changing the elevation prompt behavior.
1.
Select “Control Panel” from the
menu.
AWV22033_E.ai
➔ The “Make changes to your user account” window opens.
4.
Select “Turn User Account Control on or off”.
AWV22019_E.ai
➔ The “Control Panel” window opens.
2.
Select “User Accounts”.
AWV22034_E.ai
➔ The “User Accounts Control” window opens. AWV22032_E.ai
➔ The “User Accounts” window opens.
5.
Click
.
AWV22035_E.ai
➔ The “Turn User Account Control On or Off” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-10
MC-11 6.
Remove the checkmark from “Use User Account Control (UAC) to help protect your computer” and click
.
8.
Enter “system” and click
.
AWV22036_E.ai AWV32020.ai
➔ The “Microsoft Windows” window opens.
NOTE The password appear as “l”. ➔ The “Welcome Center” window opens.
AWV22037_E.ai
7.
Click
.
9.
Remove the checkmark from “Run at setup (Welcome Center can be found in Control Panel, System and Maintenance)” and close the “Welcome Center” window.
➔ After the PC restart, the log-in window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-11
MC-12 1.3.2 Installing the Driver Software For driver software installation, use the utility software on “DRIVERS AND UTILITIES ALREADY INSTALLED ON YOUR COMPUTER” DVD. To do this, you must first install the utility software on the PC for the CR-IR 391CL.
REFERENCE To determine what driver software needs to be installed, you can use Device Manager. To open Device Manager, perform the following steps: 1. Right-click “Computer” from the the pull-down menu that opens. The “System” window opens.
Installing the Dell Resource DVD utility software
1.
Insert “DRIVERS AND UTILITIES ALREADY INSTALLED ON YOUR COMPUTER” DVD into the PC. ➔ The “AutoPlay” window opens.
2.
Place a checkmark to “Always do this for software and games” and click “Run autoRcd.exe”.
menu and select “Properties” from
2. Select ”Device Manager”. The “Device Manager” window opens. The software for items marked “!” in Device Manager is not installed. Install the driver software for such items. CBS03014.ai
➔ The “ResourceCD Installation” window opens.
3.
Click
.
AWV22043_E.ai
➔ A new window opens to indicate that the installation wizard is started.
AWV22044_E.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-12
MC-13 4.
Click
Installing the driver software
.
Install the following driver software items.
➔ The “Ready to Install the Program” window opens.
System Utilities Controller drivers Video drivers Network drivers Audio drivers
NOTE AWV22045_E.ai
5.
Click
.
➔ The installation processing starts. After a while, the “InstallShield Wizard Complete” window opens.
Since the drivers to be installed vary with the employed PC model and utility software version, confirm the correct drivers by calling Dell’s Technical Support or visiting associated home page.
● Installing the System Utilities
1.
In the “System Utilities” area, click the “Dell System Software Rev:xx”. ➔ The System Utilities window opens.
AWV22046_E.ai
6.
Click
.
➔ A utility program starts to display the initial screen.
7.
Remove the checkmark from “Click here to prevent this information from being displayed again.” and close the window.
CBS03006.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-13
MC-14 2.
5.
Scroll the display and click [Extract]. ➔ The System Utilities-related window opens.
Click [Yes]. ➔ A window opens to indicate that decompressing processing is completed.
CBS03010.ai
6. CBS03007.ai
3.
Click [OK]. ➔ The System Software’s setup wizard window opens.
Click [Continue]. ➔ A window opens to prompt you to confirm a destination targeted for decompressing the System Software.
CBS03008.ai
4.
Click [OK]. CBS03011.ai
➔ A window opens to prompt you to confirm the folder where the file is to be decompressed.
CBS03009.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-14
MC-15 7.
● Installing the Controller drivers
Click [Next]. ➔ The following window opens.
1.
In the “Controller Drivers” area, click the “Intel Chipset Software Installation Utility Rev:xxx”. ➔ The Controller drivers window opens.
CBS03012.ai
8.
Click [Install]. ➔ The System Software’s setup complete window opens.
CBS03015.ai
2.
Scroll the display and click [Extract]. ➔ The Controller drivers-related window opens.
CBS03013.ai
9.
Click [Finish].
CBS03016.ai
➔ The system returns to the System Utilities window.
10. Click [Return]. 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-15
MC-16 3.
6.
Click [Continue]. ➔ A window opens to prompt you to confirm a destination targeted for decompressing the Controller driver.
Click [OK]. ➔ The following window opens.
CBS03017.ai
4.
Click [OK]. ➔ A window opens to prompt you to confirm the folder where the file is to be decompressed.
CBS03020.ai
7.
Click [Next]. ➔ The “License Agreement” window opens.
CBS03018.ai
5.
Click [Yes]. ➔ A window opens to indicate that decompressing processing is completed.
CBS03019.ai
CBS03021.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-16
MC-17 8.
10. Checkmark “Yes, I want to restart this computer now.”, and click
Click [Yes].
[Finish].
➔ The “Readme File Information” window opens.
➔ The PC restarts.
11. Enter “system” as the password. Click
.
➔ The Dell Resource CD utility software window opens.
CBS03022.ai
9.
Click [Next]. ➔ The Controller driver’s setup completion window opens.
CBS03023.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-17
MC-18 3.
● Installing the Video drivers
1.
Click [Continue]. ➔ A window opens to prompt you to confirm a destination targeted for decompressing the Video driver.
In the “Video Device Drivers” area, click “Intel Q43/Q45/G43/G45...”.
NOTE If there is no checkmark beside the driver name(s) or there are two or more driver names checkmarked, contact the Dell’s Technical Support. ➔ The Video drivers window opens. CBS03026.ai
4.
Click [OK]. ➔ A window opens to prompt you to confirm the folder where the file is to be decompressed.
CBS03027.ai
5. CBS03024.ai
2.
Click [Yes]. ➔ A window opens to indicate that decompressing processing is completed.
Scroll the display and click [Extract]. ➔ The Video drivers-related window opens.
CBS03028.ai
CBS03025.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-18
MC-19 6.
8.
Click [OK]. ➔ The Video driver’s setup wizard window opens.
Click [Yes]. ➔ The “Readme File Information” window opens.
CBS03029.ai
7.
Remove the checkmark from “automatically run WinSAT...” and click [Next]. ➔ The “License Agreement” window opens.
CBS03031.ai
9.
Click [Next]. ➔ Installation processing starts. When the Installation processing completes, the window stops with the “Click Next to continue” is selected.
CBS03032.ai
CBS03030.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-19
MC-20 10. Click [Next].
● Installing the Network drivers
➔ The Video driver’s setup completion window opens.
1.
In the “Network (NIC) Drivers” area, click the name of a driver to use (one that is checkmarked).
NOTE Since the drivers to be installed vary with the employed PC model and utility software version, confirm the correct drivers by calling Dell’s Technical Support or visiting associated home page. ➔ The Network drivers window opens.
CBS03033.ai
11. Select “Yes, I want to restart this computer now.” and click [Finish]. ➔ The PC restarts.
12. Enter “system” as the password. Click then
.
➔ The Dell Resource CD utility software window opens.
CBS03034.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-20
MC-21 2.
5.
Click [Extract]. ➔ The Network drivers-related window opens.
Click [Yes]. ➔ A window opens to indicate that decompressing processing is completed.
CBS03038.ai
6. CBS03035.ai
3.
Click [OK]. ➔ The “Installing Drivers” window opens.
Click [Continue]. ➔ A window opens to prompt you to confirm a destination targeted for decompressing the Network driver.
CBS03039.ai
7.
Click [Close].
CBS03036.ai
4.
Click [OK]. ➔ A window opens to prompt you to confirm the folder where the file is to be decompressed.
CBS03037.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-21
MC-22 2.
● Installing the Audio drivers
1.
Click [Extract]. ➔ The Audio drivers-related window opens.
In the “Audio Drivers” area, click the name of a driver to use (one that is checkmarked).
NOTE If there is no checkmarked driver displayed, contact Dell’s Technical Support. ➔ The Audio drivers window opens.
CBS03041.ai
3.
Click [Continue]. ➔ A window opens to prompt you to confirm a destination targeted for decompressing the Audio driver.
CBS03042.ai
4. CBS03040.ai
Click [OK]. ➔ A window opens to prompt you to confirm the folder where the file is to be decompressed.
CBS03043.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-22
MC-23 5.
7.
Click [Yes]. ➔ A window opens to indicate that decompressing processing is completed.
Click [Next]. ➔ The Audio driver’s setup complete window opens.
CBS03044.ai
6.
Click [OK]. ➔ The Audio driver’s setup wizard window opens.
CBS03046.ai
8.
Click [Finish]. ➔ The system returns to the Audio drivers window.
9.
Close the Dell Resource CD Utility Software window.
10. Remove the “DRIVERS AND UTILITIES ALREADY” DVD from the DVD drive.
CBS03045.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-23
MC-24 Checking the Device Manager
1.
Select “Control Panel” from the
menu.
➔ The “Control Panel” window opens.
2.
Select “Hardware and Sound”. ➔ The “Hardware and Sound” window opens.
3.
Click “Device Manager”.
CBS03047.ai
➔ The “Device Manager” window opens.
4.
Confirm “!” does not appear.
5.
Close the “Device Manager” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-24
MC-25 1.3.3 Setting the OS Perform the following OS-related settings. Regional and language options settings Defining the character to be used as a decimal point Setting up the taskbar Checking the monitor settings Windows Sidebar Properties Setting up Power Options Setting up Windows Update Setting up Security Center Setting up Windows Defender Setting up Defragmentation
■ Regional and language options settings Prior to performing necessary settings using the Service Utility functions, perform OS settings according to the region where the equipment is to be installed.
1.
Select [Control Panel] from the
menu.
➔ The Control Panel is displayed. If the window is not in the Classic View mode, click “Classic View” to change the display to Classic View.
2.
Double-click [Regional and Language Options]. ➔ The [Regional and Language Options] window opens.
CBS03049.ai
3.
020-221-01E 04.28.2009 FM5535
Click the “Formats” tab to select a language (region) to use from the pull-down menu in “Current format”.
CR-IR 391CL Service Manual
MC-25
MC-26 4.
6.
Click [Customize this format]. ➔ The [Customize Regional Options] window then opens.
5.
Following examples shown in the table below, enter a date from the keyboard in the [Date formats:] box of the [Short date] field.
CAUTION
Select the “Date” tab.
A date entered will not be displayed correctly if the order to display “year/ month/day” used in the CR-IR 391CL system is different from that of the OS date format. Because this is used for important information, including the date of study and the like, it is essential to perform a date setting on the OS side carefully at this step. For details of settings of the date format used in the CR-IR 391CL system, see “5.3 System Settings” under “MU: Maintenance Utility.” Date format used in the CR-IR 391CL
Date format used in the OS’ short “Date” format
Japanese date (S62.10.07)
yy/MM/dd
ANSI long date (1987.OCT.07)
yyyy/MM/dd
ANSI short date (1987.10.07)
yyyy/MM/dd
American long date (OCT.07.1987)
MM/dd/yyyy
American short date (10.07.1987)
MM/dd/yyyy
European long date (07.OCT.1987)
dd/MM/yyyy
European short date (07.10.1987)
dd/MM/yyyy
* Enter directly from the keyboard because some formats are not displayed in the pull-down menu. CBS03048.ai
7.
Similarly, perform settings for the [Long date] field.
NOTE When doing so, observe the order of entering “year/month/day” in the short date format determined at Step 6 above.
8.
020-221-01E 04.28.2009 FM5535
Click [Apply].
CR-IR 391CL Service Manual
MC-26
MC-27 9.
Select the “Time” tab.
CBS03050.ai
10. Select [HH:mm:ss] or [H:mm:ss] for the [Time format:] box setting. CAUTION Do not use “tt” representation. The CR-IR 391CL database will not be displayed correctly if [hh:mm:ss tt] or [h:mm:ss tt] is specified for the time format.
11. Click [OK]. ➔ The system returns to the [Regional and Language Options] window.
12. Click [OK]. ➔ The system returns to the Control Panel.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-27
MC-28 Defining the character to be used as a decimal point
3.
Select “.” (period) as the character to be used as a decimal point. If anything other than a period is selected, an error occurs when you select an image distribution destination with the QA function.
1.
Check to see that the character specified in the “Decimal symbol” field is “.” (period). If not, change it to “.” (period). If, as a result of the above selection, the same symbol is selected for the “Digit grouping symbol” and “Decimal symbol” fields, change the symbol for the “Digit grouping symbol” field.
In the “Control Panel” window, double-click “Regional and Language Options.” The “Regional and Language Options” window opens.
2.
Make sure that the “Regional Options” tab is selected and click [Customize].
CBS03051.ai
The “Customize Regional Options” window opens.
CBS03052.ai
4.
Click [OK]. The system returns to the “Regional and Language Options” window.
5.
Click [OK]. The system returns to the Control Panel.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-28
MC-29 3.
Setting up the taskbar Change the taskbar appearance settings in the following way.
1.
Select “Notification Area” and remove the checkmark from ). “Hide inactive icons” ( ➔
In the “Control Panel” window, double-click “Taskbar and Start Menu Properties.” The “Taskbar and Start Menu Properties” window opens.
2.
Place a checkmark to “Auto-hide the taskbar” (
➔
).
CBS03054.ai
4.
Click [OK]. ➔ The system returns to the Control Panel.
CBS03053.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-29
MC-30 5.
Checking the monitor settings
1.
Select “Adapter” tab and click [List All Modes...].
In the “Control Panel” window, double-click “Display settings”. The “Display settings” window opens.
2.
Double-click the “Personalization”. The “Personalization appearance and sounds” window opens.
3.
Click “Display settings”. The “Display Settings” window opens.
CBS03084.ai
The “List All Modes” window opens.
CBS03056.ai CBS03055.ai
4.
Click [Advanced Settings...].
6.
Select “1280 by 1024, True Color (32bit), 60 Hertz” and click [OK]. The system return to the Display properties window.
7.
Click [OK]. The system returns to the “Display Settings” window.
8.
Click [OK]. The system returns to the “Personalize appearance and sounds” window.
9.
Close the “Personalize appearance and sounds” window The system returns to the Control Panel.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-30
MC-31 ■ Setting up Power Options
■ Windows Sidebar Properties
1.
In the “Control Panel” window, double-click “Windows Sidebar Properties”. ➔ The “Windows Sidebar Properties” window opens.
2.
Remove the checkmark from the “Start Sidebar when Windows starts”.
1.
In the “Control Panel” window, double-click “Power Options”. The “Power Options Properties” window opens.
2.
Select “Balanced” and click “change plan settings”.
CBS03058.ai
3.
Set “Turn off the display” to “20 minuets” and “Put the computer to sleep” to “Never”.
CBS03057.ai
3.
Click [OK]. ➔ The system returns to the Control Panel.
CBS03059.ai
4.
Click [Save changes]. The system returns to the “Power Options Properties” window.
5. 020-221-02E 01.08.2010 FM5563
Return to the Control Panel.
CR-IR 391CL Service Manual
MC-31
MC-32 ■ Setting up Windows Update setting
1.
■ Setting up Security Center
In the “Control Panel” window, double-click “Windows update”.
1.
➔ The “Windows Security Center” window opens.
➔ The “Windows update” window opens.
2.
In the “Control Panel” window, double-click “Security Center”.
Click [Change settings].
2.
Click
3.
Click “Show me my available options”.
in the “Malware protection”.
CBS03060.ai
➔ The “Change settings” window opens.
3.
Select “Never check for updates (not recommended)”.
CBS03062.ai
➔ The “Choose an antivirus option” window opens.
4.
Click [I have an antivirus program that I’ll monitor myself]. ➔ The system return to the “Windows Security Center” window.
CBS03061.ai
4.
Click [OK]. ➔ The system return to the “Windows update” window.
5.
Return to the Control Panel.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-32
MC-33 5.
Select “Change the way Security Center alerts me”.
■ Setting up Windows Defender
1.
In the “Control Panel” window, double-click “Windows Defender”. ➔ The “Windows Defender” window opens.
2.
Select “Tools” and click “Options”.
CBS03063.ai
➔ The “Do you want to be notified of security issues?” window opens.
6.
Click [Don’t notify me and don’t display the icon (not recommended)]. ➔ The system return to the “Windows Security Center” window.
7.
Close the “Windows Security Center” window.
CBS03064.ai
➔ The “Options” window opens.
3.
Remove the checkmarks from “Use Windows Defender” and click [Save].
CBS03065.ai
➔ The confirmation window opens.
CBS03066.ai
4.
Click [Close]. ➔ The system returns to the “Tools and Settings” window.
5.
Close the “Tools and Settings” window and “Control Panel” window. ➔ The system returns to the desktop screen.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-33
MC-34 Setting up Defragmentation
3.
Select “Tools” tab and select
.
Disable defrag schedule setting.
1.
Select “Computer” from the
menu.
AWV22082_E.ai AWV22080_E.ai
➔ The “Computer” window opens.
2.
Right-click “Local Disk (C:)” and select “Properties”.
➔ The “Disk Defragmenter” window opens.
4.
Remove the checkmark from “Run on a schedule (recommended)” and click .
AWV22083_E.ai
➔ The system returns to the “Local Disk (C:) Properties” window. AWV22081_E.ai
5.
Click
.
➔ The system returns to the “Computer” window.
➔ The “Local Disk (C:) Properties” window opens.
6.
Close the “Computer” window. ➔ The system returns to the desktop screen.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-34
MC-35 5.
1.4 Setting the Network
Double-click “dotnetfx”. ➔ The installation start confirmation window opens.
1.4.1 Installing .NET Framework
1.
Insert the CR-IR 391CL application CD into the DVD drive.
NOTE In the case of “AutoPlay” dialog appears, operate according to the following procedures. I. Checkmark “Always do this for software and games:” and click [Run InstallLauncher.exe].
CBS03068.ai
6.
Click [Yes]. ➔ In a while, the “License Agreement” window opens.
➔ The “Setup” window opens.
II. Click [Tool Application Setup]. ➔ The “Select Menu” window opens.
III. Click [Open CD Root Folder]. IV. Perform step 4 and later.
2.
Select “Computer” from the
menu.
➔ The “Computer” window opens.
3.
Right-click “D drive” and select “open”.
4.
Open folders in the following sequence: “dotNet”, “DNET1.1”, and “DNET1.1”.
CBS03069.ai
7.
Select the “I agree” radio button, and click [Install]. ➔ Installation processing starts. When the installation completes, the completion window opens.
CBS03070.ai
CBS03067.ai
8. 020-221-02E 01.08.2010 FM5563
Click [OK].
CR-IR 391CL Service Manual
MC-35
MC-36 9.
Open folders in the following sequence: “D drive”, “dotNet”, “DNET1.1”, and “DNET1.1SP1”.
12. Click [I accept]. ➔ Installation processing starts. When the installation completes, the completion window opens.
CBS03074.ai
13. Click [OK].
CBS03071.ai
10. Double-click “NDP1.1sp1-KB867460-X86”. ➔ The confirmation window for starting installation of “.NET Framework 1.1 Service Pack 1” opens.
14. Restart the PC. 15. When a login window opens after the restart of the PC, enter “system” as the password. Click
.
➔ The desktop window open.
CBS03072.ai
11. Click [OK]. ➔ The supplemental end user license agreement window opens.
CBS03073.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-36
MC-37 4.
1.4.2 Setting the IP address
Double-click “Local Area Connection”.
Setting the IP address.
1.
Select “Control Panel” from the
menu.
CBS03077.ai
➔ The “Local Area Connection Status” window opens.
5.
Click
.
AWV22019_E.ai
➔ The “Control Panel” window opens.
2.
Double-click
.
➔ The “Network and Sharing Center” window opens.
3.
Select “Manage network connections”.
AWV22050_E.ai
➔ The “Local Area Connection Properties” window opens.
CBS03076.ai
➔ The “Network Connection” window opens. 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MC-37
MC-38 6.
Remove the checkmark from “Internet Protocol Version 6 (TCP/IPv6)”.
8.
Select “Use the following IP address” and make the following settings.
I. II.
CBS03078.ai
7.
CBS03080.ai
Select “Internet Protocol Version 4 (TCP/IPv4)” and click
.
I. Enter the IP address.
(ex. : 172.16.1.20)
II. Enter the Subnet mask. (ex. : 255.255.0.0)
NOTE Enter the IP address and subnet mask that were noted down before the start of OS installation.
9.
Click
.
➔ The system returns to the “Local Area Connection Properties” window.
10. Click CBS03079.ai
The “Internet Protocol Version 4 (TCP/IPv4) Properties” window opens.
.
➔ The system returns to the “Local Area Connection Status” window.
11. Click
.
➔ The system returns to the “Network Connection” window.
12. Close the “Network Connection” window. ➔ The system returns to the “Network and Sharing Center” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-38
MC-39 13. Click
15. Click [Yes, turn on network discovery for all public networks].
at the “Network discovery”.
MC000418.ai
➔ The system returns to the “Network and Sharing Center” window.
16. Confirm that the “Network discovery” is On and close the window.
MC000416.ai
14. Select the “Turn on network discovery”, and click
.
MC000419.ai
➔ The system returns to the desktop screen.
MC000417.ai
➔ The “Network discovery” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-39
MC-40 4.
1.4.3 Adding the Windows Components
Put checkmarks for the following items.
Make an additional installation for Windows components.
ActiveX Installer Service
1.
Web Management Tools
Select “Control Panel” from the
menu.
FTP Publishing Service .NET Extensibility ASP .NET ISAPI Extensions ISAPI Filters Common Http Features HTTP Logging Security XPS Viewer
AWV22019_E.ai
➔ The “Control Panel” window opens.
2.
Telnet Client Windows DFS Replication Service
Double-click [Programs and Features]. ➔ The “Uninstall or change a program” window opens.
3.
Remote Differential Compression
Windows Process Activation Service
Select “Turn Windows features on or off”.
AWV22077_E.ai
➔ The “Windows Features” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-40
MC-41 NOTE
indicates it is the item to be installed.
indicates a part of the items of its lower layer will be installed.
When put a checkmark in its check box, all items of its lower layer will be selected automatically in case there is any lower layer.
5.
Click
.
➔ Upon completion of installation, the following window opens.
CBS03082.ai
6.
Click [Restart Now]. ➔ The PC Restart.
7.
When a login window opens after the restart of the PC, enter “system” as the password. Click
.
CBS03081.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-41
MC-42 1.4.4 Setting the Service (Only for Server PC)
1.
4.
Right-click “FTP Publishing Service” and select “Properties”. ➔ The “FTP Publishing Service Properties (Local Computer)” window opens.
Select “Control Panel” from the
menu.
5.
Select “Automatic” from the “Startup type:” pull-down menu and click [Start] .
AWV22019_E.ai
➔ The “Control Panel” window opens.
2.
Double-click [Administrative Tools]. CBS03083.ai
➔ The “Administrative Tools” window opens.
3.
Double-click “Service”.
➔ The system returns to the “Service” window.
6.
Click [OK] .
7.
Close the “Service” window. ➔ The system returns to the “Administrative Tools” window.
8.
Close the “Administrative Tools” window. ➔ The system returns to the desktop screen
AWV22086_E.ai
➔ The “Service” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-42
MC-43 1.5 RU Settings To perform RU software settings, be sure to observe the procedures shown in the flow below. 1.5.1 Installing the RU PC-TOOL
1.5.1 Installing the RU PC-TOOL The RU PC-TOOL is a utility (also referred to as the FCR TOOL) that exercises RU-AP installation, RU-Config setup, data backup, and other functions. For the operations of the CR-IR 391CL and RU, it is necessary that the RU PCTOOL be installed in the CR-IR 391CL system.
NOTE 1.5.2 Setting Up and Checking Firewall Settings 1.5.3 Installing and Registering RU-AP
Before installing the RU PC-TOOL, be sure to confirm that User Account Control is turned off.
1.
Insert the RU APL Software CD into the CR-IR 391CL’s DVD drive. ➔ The “Set Up PC-TOOL” window automatically opens.
CBS03084.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-43
MC-44 2.
Click [INSTALL].
4.
Click [OK].
5.
Click [Next].
CBS03085.ai
3.
Select “For FTP-Server”, and click [SET].
NOTE Be sure to select “For FTP-Server.” If “For Client PC” is selected, installation cannot be done successfully. If you have erroneously selected “For Client PC” and clicked [SET], perform installation again by following the procedure below. See “Appendix 8: Corrective Procedure to be Performed after Improper RU PC-TOOL Installation” under “IN: Installation” of the RU Service Manual.
CBS03087.ai
6.
Click [Install].
CBS03086.ai
➔ The confirmation window opens.
CBS03088.ai
MC000428.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-44
MC-45 7.
8.
When the installation completes, click [Finish].
Press the key. ➔ The following window opens.
CBS03091.ai
CBS03089.ai
➔ The following window opens.
9.
Press the key. ➔ The “Windows Security Alert” window opens.
10. Click [Unblock].
CBS03090.ai
CBS03092.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-45
MC-46 11. Click [EXIT].
1.5.2 Setting Up and Checking Firewall Settings
1.
Select “Control Panel” from the
menu.
➔ The “Control Panel” window opens.
2.
Double-click [Windows Firewall]. ➔ The “Windows Firewall” window opens.
3.
Select “Allow a program through Windows Firewall”.
CBS03094.ai CBS03093.ai
12. Remove the RU APL Software CD from the DVD drive, and restart the
PC. When the OS has started up and the CR-IR 391CL’s startup window opens, click in the upper-left corner and then the upper-right corner of the window.
➔ The “Windows Firewall Settings” window opens.
4.
Click the “Exceptions” tab.
➔ The Service Utility’s authentication window opens.
13. Click [Cancel] to close the window.
CBS03095.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-46
MC-47 5.
Check to see that “FTP (File Transfer Protocol)” is checkmarked.
6.
Check to see that “BmpServer” is checkmarked.
CBS03096.ai
If the “FTP” item does not exist, perform the procedure described later in “■ If ‘FTP’ does not exist (Adding a program).”
CBS03097.ai
If “BmpServer” does not exist, perform the procedure described later in “■ If ‘BmpServer’ does not exist (Adding a program).”
NOTE “File Transfer Program” or “ftp” may be displayed, instead of “FTP.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-47
MC-48 ■ If “FTP” does not exist (Adding a program)
1.
2.
Click [Browse...]. ➔ The “Browse” window opens.
In the “Exceptions” tab of the “Windows Firewall” window, click [Add program...].
CBS03100.ai
3.
Enter “C:\WINDOWS\SYSTEM32\FTP” in the filename field, and click [Open].
4.
Click [OK] in the “Add a Program” window. ➔ The system returns to the “Exceptions” tab in the “Windows Firewall” window.
CBS03098.ai
➔ The “Add a Program” window opens.
5.
Make sure that “FTP” is checkmarked.
NOTE “File Transfer Program” or “ftp” may be displayed, instead of “FTP.”
CBS03099.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-48
MC-49 ■ If “BmpServer” does not exist (Adding a program)
1.
2.
Click [Browse...]. ➔ The “Browse” dialog opens.
In the “Exceptions” tab of the “Windows Firewall” window, click [Add program...].
CBS03100.ai
3.
Select “C:\Program Files\FujiFilm\FCR\TOOL\BmpServer”, and click [Open].
4.
Click [OK] in the “Add a Program” window. ➔ The system returns to the “Exceptions” tab in the “Windows Firewall” window.
CBS03101.ai
➔ The “Add a Program” window opens.
5.
Make sure that “BmpServer” is checkmarked.
CBS03099.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-49
MC-50 ■ Setting up the FTP port
1.
■ Setting up inetinfo
In the “Exceptions” tab of the “Windows Firewall” window, click [Add port].
1.
In the “Exceptions” tab of the “Windows Firewall” window, click [Add program...].
➔ The “Add a Port” window opens.
CBS03102.ai
2.
In the “Name:” field, enter “FTP_port”.
3.
In the “Port number” field, enter “21”.
4.
Click “TCP” to select it.
CBS03098.ai
➔ The “Add a Program” window opens.
CBS03103.ai
5.
Click [OK].
CBS03099.ai
➔ The system returns to the “Exceptions” tab in the “Windows Firewall” window. 020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-50
MC-51 2.
4.
Click [Browse...]. ➔ The “Browse” window opens.
Click [Open]. ➔ The system returns to the “Add a Program” window.
CBS03105.ai
CBS03100.ai
3.
5.
With “inetinfo” being selected, click [OK]. ➔ The system returns to the “Windows Firewall” window.
In the “File name:” field, enter “C:\WINDOWS\system32\inetsrv\ inetinfo”.
CBS03106.ai CBS03104.ai
6.
Make sure that “inetinfo” is checkmarked, and click [OK]. ➔ The system returns to the “Control Panel.”
7. 020-221-02E 01.08.2010 FM5563
Close the “Control Panel” window.
CR-IR 391CL Service Manual
MC-51
MC-52 1.5.3 Installing and Registering RU-AP
3.
Click [START].
■ Installing the RU-AP Software and Restoring the RU-Config First, install the RU-AP in the CR-IR 391CL, and then restore the RU-Config. To do this, use the RU PC-TOOL and perform the procedures set forth in this section.
NOTE Before installing the RU-AP, turn ON the RU power.
● Installing the RU-AP ➥ REFERENCE This section describes the procedures, by way of example, where settings are made as follows: INSTALL VERSION : 1.0 LANGUAGE : NONE BRAND TYPE : NONE
1.
CBS03107.ai
4.
Enter “RU NAME” and “RU IP ADDR.”
NOTE Enter the IP address of the RU that has been set on the CR-IR 391CL.
Turn the RU OFF and then turn it ON.
NOTE Although a connection error occurs on the RU side, it will pose no problem to subsequent work if you simply clear the alarm.
2.
Select “Computer” from the
#1[Input] #2[Input] FRCH7050.ai
menu and double-click DVD drive (D:).
5.
Click [PING]. [Click]
FRCH7051.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-52
MC-53 6.
Check the result of PING, and click
8.
to close the window.
Click [OK].
#2 CBS03109.ai
9.
#1 [Check]
Select “INSTALL VERSION” and click [OK].
“0% loss” should appear. CBS03108.ai
● [GOOD indication]. If the following message appears, the result is normal. | Ping statistics for 172.16.1.10: | | Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), |
● [NO GOOD indication].
CBS03110.ai
10. Make sure that “INCH” is selected for “IP Size Code Setting” (size system of the IP used).
Other than above is all abnormal. (The selected IP address of the RU is displayed.)
NOTE In the case of “NO GOOD” indication See “MT: Machine Troubleshooting” of the RU Service Manual.
7.
Click [INSTALL]. [Click]
CBS03111.ai
FRCH7053.ai
➥ REFERENCE When clicking on [INSTALL], “Under maintenance” appears on the operation panel of the RU.
020-221-02E 01.08.2010 FM5563
11. If configuration information other than the default settings is used at
the request of the institution, change the settings as described below.
CR-IR 391CL Service Manual
MC-53
MC-54 12. Click [SET].
14. Confirm the installation precautions. CAUTION While the flash ROM is being written into, never turn OFF the RU or CR Console. If you turn OFF the power, the program stored in the memory becomes damaged and cannot restart.
15. Click [SET]. ➔ When you click on [SET], the installation screen opens on the CR Console display. While the flash ROM is being written into, the RU’s LED blinks. CBS03112.ai
13. Check to see that “172.16.1.20” and “CL0” have been set for “IP ADDRESS” and “CL NAME”, respectively.
NOTE
NOTE Do not close the installation screen until the flash ROM write process is completed. If you inadvertently close the installation screen, return to Step 7 and perform the installation procedure again. The flash ROM write process takes about 8 minutes.
If the “FTP Server IP Address” setting has been changed before the installation of the RU software, enter the new address.
[Click]
The installation screen appears on the CR-IR 391CL display.
FRCH7176.ai
While the flash ROM write process is being performed, the LED blinks.
FRCH7191.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-54
MC-55 16. Verify that the flash ROM write process is completed, and then press the key twice.
18. Check the version of the RU software, and close RU PC-TOOL. RU NAME IP ADDRESS RU TYPE VERSION ru0 172.16.1.11 CR-IRxxx 1.1
#1 [Check]
#1 [Check]
#2
#2 [Press 2 times] “Enter” key
RU TYPE CR-IRxxx: Model name of the RU to be connected is displayed. FRCH7066.ai
17. Click [OK].
GOOD indication The text is displayed in black. NO GOOD indication The text is displayed in red or the version number is not displayed.
#3 [Click]
FRCH7068.ai CBS03116.ai
NOTE If “NO GOOD” is indicated, go back to Step 1. and perform installation again.
19. Verify that the RU’s LED is extinguished, and then turn OFF the RU. ➥ REFERENCE The message “Under maintenance” is displayed on the operation panel. However, turning OFF the RU power does not affect the RU’s functionality.
20. Turn ON the power of the RU.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-55
MC-56 4.
● Restoring the RU-Config Perform the procedure set forth below to restore the RU configuration file.
CAUTION
From “LIST OF EXISTING RU”, select the RU whose data is to be restored. Con iguration(C)
EACH RU SETTING CONNECTION TEST RU NAME
F EXISTING RU
RU IP ADDR
When restoring the following items, never turn OFF the RU since access to the RU’s flash ROM is made in the restoring process. If you turn OFF the RU, the program on memory will be destroyed, making it impossible for the RU to restart.
BACKUP
RESTORE
[Select] RU NAME IP ADDRESS RU TYPE ru7 172.16.1.110 CR-IRxxx
ALL RUs SETTING
RU TYPE CR-IRxxx: Model name of the RU to be connected is displayed.
SCN ALL DATA SCN LIGHT COLLECTING DATA SCN OPTICAL DATA
1.
5. Have on hand the FD on which the RU-Config was backed up. Insert this FD into the FD drive. From the
Enter “C:\Program Files\FujiFilm\FCR\TOOL\RuPcTool\RuPCTool.exe” and click [OK]. ➔ The RU PC-TOOL main menu opens.
FRCH316A01.EPS
From the “RESTORE” pull-down menu, select an item to be restored.
RU IP ADDR
2.
VERSION V1.0
CONFIGURATION HISTORY LOG SCN ALL DATA SCN LIGHT COLLECTING DATA SCN OPTICAL DATA FRCH316A07.EPS
6.
Click [EXECUTE]. Con iguration( )
EACH RU SETTING CONNECTION TEST RU NAME
RU PC-TOOL Ver.3.0
Configuration(C)
Operation(O)
EACH RU SETTING CONNECTION TEST ru0 RU NAME RU IP ADDR 172 MUTL
PING
L ST OF EXISTING RU
RU IP ADDR
BACKUP
16 MON
INSTALL
1
10
LIST OF EXISTING RU RU NAME IP ADDRESS RU TYPE VERSION ru0 172.16.1.10 CR-IRxxx V1.0
RESTORE
ALL RUs SETTING
FRCH316A08.EPS
DELETE
FTP VERSION UP
NEW
[Click]
EDIT HISTORY
EDIT CONFIGURATION EDIT CL NAME
BACKUP
RESTORE
ERROR LOG EXECUTE I/O TRACE EXPERT
EXECUTE ERROR DB
ALL RUs SETTING UNINSTALL
VERSION UP FRCH4404.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-56
MC-57 7.
9.
Select the location of the data to be restored.
Reconfirm the location of the data to be restored, and then click [OK].
NOTE To restore data from an FD, insert the FD, which stores the data to be restored, into the CR-IR 391CL before selecting a data location. If no FD is set in its position, you cannot select the FD drive (a:\).
#2 [Click]
#1 [Check]
CBS03120.ai
10. When a message appears to indicate the completion of restore, click
#1 [Click]
[OK].
NOTE If the data has been restored from an FD, be sure to click the [OK] button and then remove the FD. #2 [Select]
CBS03121.ai
➔ The system returns to the main menu of RU PC-TOOL.
11. Click
CBS03118.ai
8.
Verify that the selected location is displayed, and then click [OK].
in the upper-right corner of the window.
➔ The system returns to the desktop window.
#1 [Verify] The selected location is displayed. #2 [Click]
CBS03119.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-57
MC-58 1.6 Installing the SQL Server This section shows the procedures used to install the SQL Server. The SQL Sever is a database for managing images and patient information that are handled by the CR-IR 391CL system. Thus, the CR-IR 391CL, without the SQL Server installed, does not function.
1.
Insert the CR-IR 391CL application CD into the DVD drive.
2.
Select “Computer” from the
3.
Click
.
➔ The CR-IR 391CL application’s setup window opens.
menu and double-click
“DVD RW drive (D:)”. ➔ The installation launcher starts
(“Vx.x” represents a version number.)
(“Vx.x” represents a version number.)
020-221-02E 01.08.2010 FM5563
CBS03123.ai
CBS03122.ai
CR-IR 391CL Service Manual
MC-58
MC-59 NOTE If the “Install .NET Framework” button is active, make the following settings. I. Click
4.
Click
.
➔ A window for language selection opens.
.
➔ The following window opens.
CBS03149.ai
II. Click
CBS03124.ai
.
➔ The following window opens.
5.
Select a desired language, and click [Next]. ➔ The command prompt window opens, and installation of the SQL Server starts. ➔ Installation processing completes.
CBS03150.ai
III. Click the [Next]. ➔ The system returns to the installation launcher window.
CBS03125.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-59
MC-60 6.
Press the key.
NOTE If the window prompting you to restart opens, click [Yes] to restart the system.
CBS03130.ai
➔ The command prompt window closes, and the system returns to the installation launcher.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-60
MC-61 1.7 Installing the CR-IR 391CL Software This section shows the installation procedures of the CR-IR 391CL software, menu and parameter files, and the standard kit CD.
1.7.1 Installing the CR-IR 391CL
1.
Click
.
► INSTRUCTIONS If there is a backup of the config data, be sure to perform installation of the application of the same version as the one for which the backup was made. To install the application of a version newer than the one in which backup was performed, the following procedure becomes necessary. Installation of the old-version application in which the backup was taken Restoration of the config data Update of the application For details on the procedure, see “Appendix 2: CR-IR 391CL Software Version Upgrade.”
NOTE Make sure to perform installation processing set forth herein with the PC properly connected to a network, otherwise intended processing will result in a failure.
(“Vx.x” represents a version number.)
CBS03126.ai
➔ The installer starts, and the “Welcome to the InstallShield Wizard for FCR Application” window opens.
CBS03127.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-61
MC-62 2.
4.
Click [Next]. ➔ The “Ready to Install the Program” window opens.
Click [Finish]. ➔ The following window opens.
CBS03130.ai
CBS03128.ai
3.
5.
Click [Yes]. ➔ The PC restarts.
Click [Install]. ➔ In about 2 minutes, a command prompt window opens. ➔ The following window indicating completion of the installation opens.
CBS03129.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-62
MC-63 4.
1.7.2 Installing a Settings File
1.
Select a language to install configuration files, and click [Next]. ➔ The window for selecting the type of monitor opens.
On the installation launcher window, click “CR-IR 391CL Application Setup”. ➔ The CR-IR 391CL application’s setup window open.
2.
Click
.
➔ The “Select a type of facility” window opens.
CBS03133.ai
5.
Select “Color”, and click [Next]. ➔ The confirmation window opens.
CBS03154.ai
3.
Select “Hospital/Medical Clinic”, and click [Next]. ➔ The “Select language to install Configuration files” window opens.
CBS03134.ai
6.
Click [Yes]. ➔ Installation of the configuration file starts. When the installation completes, the CR-IR 391CL application’s setup window opens.
CBS03132.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-63
MC-64 3.
1.7.3 Installing Menu and Parameter Files
1.
Select a desired language, and click [Next]. ➔ A window opens prompting for confirmation of the parameter file installation.
In the installation launcher window, click
.
➔ The “Select a type of facility” window opens.
CBS03136.ai
4.
Select “ON (Software Options required)” and click [Next]. ➔ The configuration window opens.
CBS03135.ai
2.
Select “Hospital/Medical Clinic”, and click [Next]. ➔ The window for selecting the study menu language opens.
CBS03137.ai
5.
➔ Installation of the parameter file starts. When the installation completes, the CR-IR 391CL application’s setup window opens.
CBS03135.ai
020-221-02E 01.08.2010 FM5563
Click [Yes].
6.
On the installation launcher window, click [Finish].
7.
Remove the CD from the DVD drive.
CR-IR 391CL Service Manual
MC-64
MC-65 4.
1.7.4 Installing the Standard Kit CD
1.
Insert the standard kit CD into the DVD drive.
2.
Select “Computer” from the
When “Press any key.” appears, press the key.
menu and double-click DVD drive (D:).
➔ The application automatically starts, and a command prompt opens.
➥ REFERENCE Open the DVD drive and double-click the “Setup” Windows Batch File when the application doesn’t start automatically. Then, a command prompt opens.
MC000156.EPS
5.
When “Press any key to continue...” opens in the command prompt window, press the key.
MC000314.EPS
CBS03155.ai
3.
When “Press any key to continue...” appears, press the key.
6.
Remove the CD from the DVD drive.
7.
Install the AP key. See “2. AP Key Installation” in “Appendix 3: Option Key / AP Key Installation”
8.
020-221-02E 01.08.2010 FM5563
Restart the PC.
CR-IR 391CL Service Manual
MC-65
MC-66 1.8 Settings by the Simplified Setup Wizard For settings performed by the Simplified setup wizard, see “4.4 Setup by the Simplified Setup Wizard” under “IN: Installation.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-66
MC-67 6.
1.9 IIS Network Virus Protection To provide network virus protection, complete the following setup procedures for IIS.
Choose the “Security Accounts” tab and then uncheck “Allow Anonymous Connections” ( ). ➔
Disabling unnecessary accounts that can access the FTP service
Disabling unnecessary accounts that can access the FTP service
1.
From the
menu, choose [Control Panel].
The “Control Panel” window opens.
2.
Double-click [Administrative Tools]. The “Administrative Tools” window opens.
3.
Double-click [Internet Information Services (IIS) 6.0 Manager]. ➔ The “Internet Information Services” window opens.
4.
CBS03152.ai
Double-click the host name in the left-hand section and then select “FTP Sites”, and click “Default FTP Site” in the right-hand section.
7.
When the confirmation dialog box opens, click [Yes].
CBS03151.ai CBS03153.ai
5.
From the “Action” menu, choose “Properties.” ➔ The “Default FTP Site Properties” window opens.
8.
Click [OK]. The system returns then to the “Internet Information Services” window.
9.
Close the “Internet Information Services” window and “Control Panel” window.
10. When the confirmation dialog box opens, click [Yes]. After the PC restarts, the CR-IR 391CL starts automatically. 020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-67
MC-68 1.10 Making Checks Using the Service Utility 1.10.1 Running the Simplified Setup Wizard After completion of reinstallation, run the Simplified setup wizard (contained in the Service Utility) in order to make sure that all necessary settings have been made. For more information, see “5. Simplified Setup Wizard” under “MU: Maintenance Utility.” For information on how to open the Service Utility, see “2. Starting, Loggingin to, and Exiting the Service Utility” under “MU: Maintenance Utility.”
1.10.4 Installing Adobe Reader and Copying the Reference Guide
1.
Insert the Reference Guide CD into the DVD drive.
2.
Double-click “D:/Adobe Reader/English/AdbeRdr910_en_US_Std.exe”, and install Adobe Reader.
NOTE When installing, remain the setting values as default.
1.10.2 Checking for Connection with Other Equipment Check for connection with equipment that is setup under “Connected equipment” in Service settings. Connection checks are divided into checking connection to the host equipment and that to the DICOM equipment. For more information, see “7.3 Connection Check” under “MU: Maintenance Utility.”
1.10.3 Checking the Date Format
After the installation, the “Adobe Reader 9” icon appears on the desktop.
3.
The “Adobe Reader - License Agreement” window opens.
4. 5.
CAUTION Any inconsistency between the date format order used in the CR-IR 391CL system and that used in the OS may cause necessary information, such as study date, to be displayed incorrectly.
For details, see “5.3 System Settings” under “MU: Maintenance Utility.”
Setting of the date format used in the OS For details, see “4. Regional and Language Options Settings” under “MU: Maintenance Utility.”
020-221-02E 01.08.2010 FM5563
Click [Accept]. The “Adobe Reader” window opens.
Check to see that the order of entering “year/month/day” is consistent with each other for the CR-IR 391CL and the OS.
Setting of the date format used in the CR-IR 391CL system
Double-click the “Adobe Reader 9” icon.
From the menu bar, select “Edit” - “Preferences” and make the following settings. I.
Remove the checkmark from “General” - “Check for updates”.
II.
Remove the checkmark from “Internet” - “Allow speculative downloading in the background”.
III.
Remove the checkmark from “Internet” - “Display PDF in browser”
IV.
Remove the checkmark from “Trust Manager” - “Load trusted root certificates from an Adobe server (no personal information is sent)”.
6.
Click [OK].
7.
From the menu bar, select “File” - “Exit”. The system returns to the desktop screen.
8.
From the Reference Guide CD, copy the necessary guides onto the desktop.
9.
Remove the Reference Guide CD from the DVD drive.
CR-IR 391CL Service Manual
MC-68
MC-69 1.10.5 Setting the User Account Control (Activate) Turn on the “User Account Control.”
1.
Select [Control Panel] from the
menu.
➔ The “Control Panel” window opens.
2.
Double-click “User Accounts”. ➔ The “User Accounts” window opens.
3.
Select “Turn User Account Control on or off”. ➔ The “Turn User Account Control on or off ” window opens.
4.
Place a checkmark in “Use User Account Control (UAC) to help protect your computer”.
MU060214.ai
➔ The following window opens.
MU060212.ai
5.
Click [Restart Now]. ➔ The PC restarts.
After a while, the CR-IR 391CL starts up.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-69
MC-70 1.11 Restoring the CR-IR 391CL Config Data
2.
Select “Back Utility” and click [OK].
Of the information that has been backed up, restore the menu setting information, setup information, user information, and explanatory information here in this section. Patient information is to be restored later.
NOTE This section shows the procedures of restoring setting information on the user environment which is required for test startup. In test startup, a dummy patient will be registered for checking for proper operation. Such dummy data must be deleted by database initialization after the operation check. Since restoration of patient information needs to be performed after such a checkup procedure, it is not performed at this stage.
CBS03138.ai
➔ The confirmation window opens.
CAUTION When restoring the config data, be sure to perform it for the application of the same version as the one in which the backup was made. If versions do not match, it may become necessary to perform installation of the application again.
1.
In the CR-IR 391CL login window, click [Finish]. ➔ The “Select Server Application Behavior” window opens.
CBS03139.ai
3.
Click [OK]. ➔ After the system exits, the “User authentication” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-70
MC-71 4.
Type in the username “medicalservice” and the password “fieldengineer.”
6.
Click [Restore]. ➔ The “Select folder” window opens.
NOTES The username and the password both must be all in lowercase letters. In addition, they should contain no space characters. Since the username “medicalservice” is not registered in the pull-down menu, be sure to enter it from the keyboard.
CBS03142.ai
7.
Click [Browse]. ➔ The “Browse For Folder ” window opens.
CBS03140.ai
5.
Click [OK]. ➔ The “Main Menu” window opens.
CBS03143.ai
8. CBS03141.ai
Specify the destination folder to which the information is to be restored, and click [OK]. ➔ The path of the specified folder is entered and shown in the “Select folder” field.
➥ REFERENCE The destination folder for information restoration can also be specified by directly typing its path into the “Select folder” field.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-71
MC-72 9.
Click [OK].
NOTE
➔ The “Restore” window opens.
In the case of restoring “IP use count data”:
10. In the “Select Information to be restored” section, select “Menu
Setting Information”, “System configuration Information”, “User Information”, and “Explanatory Information.”
I. Checkmark “IP counter information” (
➔
).
II. Click [Start]. ➔ The “[64402] IP use count data will be restored.” window opens.
CBS03146.ai
III. Click [OK]. ➔ A restoration completed window opens.
12. Click [OK]. ➔ The system returns to the “Select folder” window.
13. Click [Cancel].
CBS03144.ai
11. Click [Start].
➔ The system returns to the “Main Menu” window.
➔ The following restoration completed window opens.
14. Click [Finish]. ➔ The system returns to the desktop.
CBS03145.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-72
MC-73 1.12 Operation Check and Initialization after Installation
3.
Enter the password “fieldengineer” (in lower-case single-byte characters only) and click
.
■ Checking for proper startup operation
1.
Restart the CR-IR 391CL to make sure that the following applications automatically start. Server application Client application Visually check the screen to determine whether the following “Select a User” window successfully opens, meaning that the startup operation has been performed properly.
2.
On the User Selection window, click the top, bottom, left, and then right edge portions of the window in order.
CBS03157.ai
The indicator window opens.
4.
Check to see that the indicator icon is not blinking.
5.
Click the indicator icon
(Event log). On the window that opens,
make sure that there is no error logged. For more information on the indicator icon, see the CR-IR 391CL Operation Manual. CBS03156.ai
The “Password input” window for service engineers shows up.
NOTES
6.
Check to see that the User Utility can be started. For information on how to open the User Utility, see “Appendix 2: User Utility” under “MU: Maintenance Utility.”
The top, bottom, left, and right edge portion clicks should be done slowly. Too fast clicking may render the detection of position information impossible. In the event of a login failure, click [Finish] and close the “User Selection” window once. Click [FCR PRIMA Console] on the desktop to reopen the “User Selection” window and go over the above-mentioned operation again.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-73
MC-74 ■ Making checks of basic operations Make checks of basic operations from study reservation to writing to DVD to verify proper operation. For information, refer to “5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD” under “IN: Installation.”
If there is any option(s) installed, run operation checks on each option on a one-byone basis.
1.13 Restoring the CR-IR 391CL Configuration Data (patient information) Of the data that was backed up beforehand, restore the patient information.
1.
Right-click the CR-IR 391CL server icon on the task tray in the bottomright corner of the desktop screen.
For details, see “7. Links to Individual Option Items” under “IN: Installation.”
■ Database initialization
IN000402.ai
➔ Its right-click menu opens.
Initialize the database. For information, refer to “7.1 Database Utility” under “MU: Maintenance Utility.”
2.
Click [Backup Utility]. ➔ The confirmation window opens.
■ Executing CreateNewHistoryDB.bat
1.
Click [Computer] from the
menu.
➔ The “Computer” window opens.
2.
Open the “C:\ProgramData\FujiFilm\Hobbit\Temp\HistoryDB\SQL\ CreateDatabase” folder.
3.
In the “CreateDatabase” window, double-click [CreateNewHistoryDB. bat]. ➔ The command prompt window opens, and “Initializing History Database is in progress…” appears.
4.
Check to see that “error.log” is not in the “CreateDatabase” window.
5.
Click
CBS03139.ai
3.
Click [OK]. ➔ After the system exits, the “User authentication” window opens.
at the upper left corner of the window.
➔ The system returns to the “Computer” window.
6.
Close the “Computer” window. ➔ The system returns to the desktop screen.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-74
MC-75 4.
Type in the username “medicalservice” and the password “fieldengineer” from the keyboard.
6.
Click [Restore]. ➔ The “Select folder” window opens.
NOTES The username and the password both must be all in lowercase letters. In addition, they should contain no space characters. Since the username “medicalservice” is not registered in the pull-down menu, be sure to enter it from the keyboard.
CBS03142.ai
7.
Click [Browse]. ➔ The “Browse For Folder ” window opens.
CBS03140.ai
5.
Click [OK]. ➔ The “Main Menu” window opens.
CBS03143.ai
8. CBS03141.ai
Specify the destination folder to which information is to be restored, and click [OK]. ➔ The path of the specified folder is displayed in the “Select folder” field.
➥ REFERENCE The destination folder for information restoration can also be specified by directly typing its path into the “Select folder” field.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-75
MC-76 9.
12. Click [OK].
Click [OK].
➔ The system returns to the “Select folder” window.
➔ The “Restore” window opens.
10. Select “Patient Information” alone and leave other items unselected in the “Select Information to be restored” section.
13. Click [Cancel]. ➔ The system returns to the “Main Menu” window.
14. Click [Finish]. ➔ The system returns to the desktop.
CBS03148.ai
11. Click [Start]. ➔ The restoration completed window opens.
CBS03145.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-76
MC-77 1.14 Reconstructing the Image Database This section shows the reconstruction procedures of the image database using the storage disk. What is reconstructed here is the index information as the image database, and images themselves are not restored. In order to restore images themselves, it is necessary to retrieve images for each study one by one after completion of the database reconstruction.
3.
From the [Tool] menu in the upper-left of the Study List window, select “Client utilities.”
➥ REFERENCE For V1.1(B) or later, start up the Client Utilities by selecting “Client Utilities” from the Utilities at the bottom of the Main window.
NOTE When performing reconstruction from storage disks, be sure to perform reconstruction beginning from the oldest dated disk. In the CR-IR 391CL system, because of its re-verification feature, a study may possibly be stored spanning more than one disk. By restoring disks in ascending chronological order, older study information stored before re-verification is overwritten by newer information.
1.
Start the CR-IR 391CL.
2.
Insert the storage disk for reconstruction into the internal DVD drive (drive for storage).
IN000633.ai
➔ The “Client Utilities” window opens.
MC000162.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-77
MC-78 4.
6.
Click [Disk Operation]. ➔ The “Disk Operation” window opens.
Select “Studies are updated (studies included in the database are deleted and disk studies are registered).” and click [Start]. ➔ The “‘Database Restoration (2)” window opens.
MC000165.EPS
➔ When processing completes, the system returns to the “Disk Operation” window automatically.
7.
Click [Close]. ➔ The system returns to the “Client Utilities” window.
MC000163.EPS
5.
Click [Database Restoration].
8.
Click [Close]. ➔ The Client Utilities windows closes.
➔ The “‘Database Restoration (1)” window opens.
NOTE When image database restoration has been done from a storage disk, that disk is set to “Write disabled.” Ask the institution’s administrator if it is necessary to write additional data to the storage disk. If yes, change the disk’s setting from “Write disabled” to “Write enabled.”
MC000164.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-78
MC-79 9.
Click [Update] from “List Operations” in the “Study List” window.
➥ REFERENCE For V1.1(B) or later, start up the Study Utility by selecting “Study Utilities” from the Utilities at the bottom of the Main window.
■ Verifying image restoration This section shows the procedures of test-retrieving images of the studies that have been restored by “image database reconstruction.”
NOTE Here in this section, only one image is to be retrieved and viewed for verification and not all images are to be restored.
1.
In the “Study List” window, select one study and click “Load Disk Images.” ➔ The “‘Retrieve Images from Disks” window opens.
IN000632.ai
➔ The restored study data now opens on the list.
MC000210.EPS
2.
With the option in the dialog as it is (“For System” being checked), click the [Retrieve] button. ➔ The “Image retrieve” window opens, and image retrieval starts.
MC000209.EPS
10. When there are two or more storage disks, repeat Steps 1. through 5 for the number of disks.
MC000211.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-79
MC-80 ➔ When the image retrieval finishes, “Retrieve of the study completed.” window opens.
5.
With the study being selected appropriately, click [Image Viewer]. ➔ The Image Viewer window opens.
MC000212.EPS
3.
Click [OK].
4.
On the “Study List” window, make sure that a thumbnail image is appearing.
MC000214.EPS
6.
Make sure that the image is properly displayed, and click “Finish” in the upper-left corner to close the window.
MC000213.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-80
MC-81
2. Service Parts Replacement (for DELL PCs) This section describes ways of replacing parts used in the CR-IR 391CL. Target work
2.1 Preparation for Parts Replacement ■ Dismounting procedure
1.
Shut down Windows Vista and then turn OFF the power to the CR-IR 391CL-PC.
2.
Disconnect the CR-IR 391CL-PC power cord from the power supply.
Reference
Preparation for parts replacement
2.1
Preparation for Parts Replacement
Hard disk
2.2
Hard Disk
DVD drive
2.3
DVD Drive
FDD drive
2.4
FD Drive
CPU
2.5
CPU
Memory
2.6
Memory
Motherboard
2.7
Motherboard
Power supply unit
2.8
Power Supply Unit
NOTE Be sure to hold the plug to disconnect the power cord. Disconnecting the power cord holding the cable may break it.
3.
Disconnect all cables from the rear of the CR-IR 391CL-PC.
4.
Place the PC in vertical orientation, and secure 1 to 2 meters of clearance to the front, rear, sides and above it.
5.
Pull its handle portion to open the cover.
6.
Lay down the PC flat.
➥ REFERENCE These parts replacement procedures written in this section, “2. Service Parts Replacement (for DELL PCs),” are described on the DELL’s website as well.
■ Mounting procedure Reverse the dismounting procedure to mount a part.
NOTES After finishing the necessary work, check to see that the CR-IR 391CL starts up normally. Perform an operation check on the replaced part(s) by using Dell Diagnostics. For detailed information, see “4.8 Error Analysis Tool (Dell Diagnostics)” under “MT: Machine Troubleshooting.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-81
MC-82 2.2 Hard Disk CAUTIONS Before replacing the hard disk, be sure to make a backup copy of the database. When performing data backup, be sure to determine the version of the application and take a note of it. After mounting a new hard disk and restoring the PC, be sure to perform reinstallation of the OS and the application.
2.3 DVD Drive ■ Dismounting procedure
1.
Place the PC’s enclosure in vertical orientation.
2.
Pull its handle portion to open the cover.
3.
Lay down the PC flat.
4.
Pull the power connector (indicated by the red circle in the figure) from the DVD drive.
■ Backing up the database Using the Backup Utility, make a backup copy of image data and config data. For detailed information on how to perform backup, see “Appendix 1: Backup Utility” under “MU: Maintenance Utility.”
■ Dismounting procedure
1.
Make preparations for parts replacement. For the procedure for making parts-replacement preparations, see “2.1 Preparation for Parts Replacement.”
2. 3. 4.
Disconnect signal cables and power cable from the hard disk. While pushing the right and left drive rails, lift the hard disk assembly to remove it. Remove the drive rails attached to the left and right sides of the hard disk assembly.
■ Mounting procedure Reverse the dismounting procedure to mount a part.
MC000202.EPS
After mounting a new hard disk drive, perform installation of the OS and the application. For detailed information on the installation procedure, see “1. Reinstalling the OS and the Application.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-82
MC-83 5.
By holding the black connector, disconnect the S-ATA cable (indicated by the blue circle in the figure) from the DVD drive.
■ Mounting procedure
1.
Fix three screws on the side of the DVD drive.
NOTE Do not tighten the screws completely. Secure the screws in a manner where their unthreaded portion comes just in contact with the drive’s side surface.
2. 3.
Make sure that the FD drive has not come off. Put the replacing DVD drive into place.
MC000202.EPS
6.
Do the following: I.
While pulling the trigger (indicated by the red circle in the figure) toward the front, II. Install the DVD drive by sliding it sideways.
NOTE The trigger is used also for mounting/dismounting the FD drive located underneath the DVD drive. Therefore, be aware that tilting or moving the PC main unit during the work may cause the trigger to be disengaged.
I.
While pulling the trigger (indicated by the red circle in the figure) toward the front, II. Remove the DVD drive by sliding it sideways.
020-221-02E 01.08.2010 FM5563
4. 5.
Check to see that the trigger is returned into its original position. Attach the power connector that was removed in Step 4 under “■ Dismounting procedure” to the DVD drive.
6.
Attach the IDE connector that was removed in Step 5 under “■ Dismounting procedure” to the DVD drive.
7.
Attach the cover that was removed in Step 2 under “■ Dismounting procedure” into place.
8.
Visually check to see from the outside that the DVD drive and the FD drive are properly mounted.
If it is found to have come off, open the cover of the PC main unit and take the DVD drive out, and then perform Steps 3 and thereafter.
CR-IR 391CL Service Manual
MC-83
MC-84 2.4 FD Drive
2.5 CPU
■ Dismounting procedure
1.
CAUTION
Make preparations for parts replacement. For the procedure for making parts-replacement preparations, see “2.1 Preparation for Parts Replacement.”
2.
Disconnect the signal and power cables from the FD drive, and remove the signal cables from the DVD drive.
3.
While pushing the right and left drive rails, lift the FD drive assembly to remove it.
4.
Remove the FD drive rails attached to the left and right sides of the FD drive assembly.
■ Mounting procedure NOTES
Whenever dismounting/remounting the CPU, be sure to wear a wrist strap to discharge the buildup of static electricity that is held by the human body, otherwise, the CPU may be damaged due to static electricity discharged from the human body.
NOTE Carefully handle the CPU as it can be damaged easily.
■ Dismounting procedure
1.
Loosen the screws on both sides of the heat sink cover (two pieces).
2.
Pull up the front end of the frame upward and remove it.
Check to see that the switch on a new FD drive is set to the “CABLE SELECT” position before mounting the FD drive. CABLE SELECT SLAVE MASTER Rear of the FD drive
MC000036.EPS
Connect cables correctly, as illustrated below, paying attention to the FD drive interface cable polarity. To motherboard
NOTE
To FD drive
Cable wires are twisted.
Reverse the dismounting procedure to mount a part.
020-221-02E 01.08.2010 FM5563
MC000218.EPS
MC000035.EPS
The heat sink may be still hot. Allow enough time for it to cool down before you touch it.
3.
Wipe off the silicone grease on the mating surfaces between the heat sink and the CPU with dry cloth.
4.
Slide the CPU socket lever to open the CPU cover.
CR-IR 391CL Service Manual
MC-84
MC-85 5.
While pulling the CPU socket lever toward the rear, remove the CPU.
2.6 Memory
NOTE After removing the CPU, be careful not to touch or drop something on the pins of the CPU socket. Any possible damage to the CPU socket pins may cause the PC unable to operate properly.
■ Dismounting procedure NOTE Before mounting the CPU, apply clean silicone grease on the mating surfaces between the CPU and the heat sink. Reverse the dismounting procedure to mount a part.
CAUTION Whenever dismounting/remounting memory, be sure to wear a wrist strap to discharge the buildup of static electricity that is held by the human body, otherwise, the CPU may be damaged due to static electricity discharged from the human body.
■ Dismounting procedure
1.
Make preparations for parts replacement. For the procedure for making parts-replacement preparations, see “2.1 Preparation for Parts Replacement.”
2.
Open levers on both the right-and-left sides of the memory socket to remove the memory.
Lever
MC000037.EPS
■ Mounting procedure
1.
Set the memory in an upright position and push it in the socket. ➔ When the memory is pushed in the socket, levers located on both the rightand-left sides will close automatically.
NOTE Pay due attention to the memory mounting direction. A notch is provided on the terminal side of the memory to prevent it from being pushed in the socket mistakenly.
2.
Restore the PC. To restore the PC, follow the steps described in “2.1 Preparation for Parts Replacement” in reverse.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-85
MC-86 2.7 Motherboard
3.
CAUTION Whenever dismounting/remounting a motherboard, be sure to wear a wrist strap to discharge the buildup of static electricity that is held by the human body, otherwise, the motherboard may be damaged due to static electricity discharged from the human body.
Disconnect all connectors from the motherboard.
4.
Signal cables for the hard disk Signal cables for the FD drive Signal cables for the DVD drive. Power cable (for main power supply/CPU power supply) USB signal cables
Remove screws and dismount the motherboard.
NOTES User’s equipment-specific information or setup information is stored in the memory (CMOS) on the motherboard. Prior to replacing a motherboard, be sure to jot down such stored data properly. When the motherboard has been replaced, it is necessary to reinstall the option key, the application key, and the standard options (to be installed from the standard kit). On the CR-IR 391CL system, optional features do not function after motherboard replacement. For information on how to reinstall the standard options, see “4.10 Tasks to be Performed at Motherboard Replacement” under “MT: Machine Troubleshooting.”
■ Mounting procedure Reverse the dismounting procedure to mount a part.
■ Setting the BIOS For details of the necessary procedure, see “Appendix 8: Setting the BIOS.”
■ Dismounting procedure
1.
Make preparations for parts replacement. For the procedure for making parts-replacement preparations, see “2.1 Preparation for Parts Replacement.”
2.
Remove the following components that are mounted on the motherboard. Memory CPU Card cage For the CPU replacement procedure, see “2.5 CPU.” For the memory replacement procedure, see “2.6 Memory.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-86
MC-87 2.8 Power Supply Unit ■ Dismounting procedure
1.
Make preparations for parts replacement. For the procedure for making parts-replacement preparations, see “2.1 Preparation for Parts Replacement.”
2.
Disconnect power cables from the motherboard and various drives.
NOTE When disconnecting the power cables from the motherboard and drives, take a note of their wiring routes you can see under the tab in the cabinet frame. When reconnecting these cables, thread them appropriately being careful not to get them pinched or bent sharply.
3.
Remove the card cage.
4.
Press down the green handle located on the power supply unit. ➔ The fastening of the power supply section is disengaged.
5.
Slide the power supply unit 2 to 3 cm toward the front of the PC.
6.
Raise the power supply unit and remove it.
■ Mounting procedure Reverse the dismounting procedure to mount a part.
CAUTION For a PC provided with the source voltage changeover switch (between 115 and 230 VAC), set the PC source voltage according to the voltage supplied to the institution concerned and then connect the power cable to the power source.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-87
MC-88
3. Updating the Software 3.1 Updating the CR-IR 391CL For detailed information on how to perform a version update of the CR-IR 391CL, see “Appendix 2: CR-IR 391CL Software Version Upgrade.”
020-221-02E 01.08.2010 FM5563
3.2 Updating the RU Software For updating the RU PC-TOOL, see “IN 8” of “CR-IR 391RU Service Manual”. For updating the RUsoftware, see “MU: 1.12 VERSION UP” of “CR-IR 391RU Service Manual”.
CR-IR 391CL Service Manual
MC-88
MC-89 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-89
MC-90 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MC-90
Appx MC 1-1
Appendix 1 Setup for Security Enhancement To provide CR-IR 391CL security enhancement, complete the following three setup procedures. Replacing the default password with a new password Changing the setup so that the computer prompts for password input at logon Defining the minimum character count for the password
NOTES
n Replacing the default password with a new password
1.
Simultaneously press the [Ctrl], [Alt], and [Delete] keys. The “Windows Security” window opens.
2.
Click the [Change a password] button. The “Change Password” window opens.
3.
Settings performed for password change and prompt for password input at login will not start up the CR-IR 391CL automatically. To have it start up automatically, it is necessary to input the user name and the password on the Windows initial screen.
From the “Change Password” window, perform the following setup steps. I. Enter the currently used password (system by default). II. Enter a new password consisting of no more than seven characters. III. Enter the new password again for confirmation.
4.
Click
.
The “Your password has been changed.” is displayed.
5.
Click [OK]. The system returns to the desktop screen.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 1-1
Appx MC 1-2 ■ Changing the setup so that the computer prompts for password input at logon
1.
From the
n Defining the minimum character count for the password
1.
menu, enter “control userpasswords2” in the search
Open “Control Panel”. Double-click
area and press the key.
and then
.
The “Local Security Policy” window opens.
CBS03149.ai
The “User Accounts” window opens.
2.
Place a checkmark in “User must enter a user name and password to use this computer.”.
CBS03151.ai
2.
3.
Click [OK]. The system returns to the desktop screen.
020-221-01E 04.28.2009 FM5535
mark for
and then click
The right-hand pane shows the password policy settings.
CBS03150.ai
The “User Accounts” window opens.
Click the
3.
Double-click
.
The “Local Security Policy Setting” window opens.
CR-IR 391CL Service Manual
Appx MC 1-2
.
Appx MC 1-3 4.
Set the number of password characters to “7”.
CBS03152.ai
5.
Click [OK] . You are then returned to the “Local Security Policy” window.
6.
Close the “Local Security Settings” window.
7.
Close the “Administrative Tools” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 1-3
Appx MC 1-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 1-4
Appx MC 2-1
Appendix 2 CR-IR 391CL Software Version Upgrade
9.
Click the [x] mark in the “Add or Remove Programs” window to close it. ➔ The system returns to the installation launcher window.
10. Click the [Finish] button and remove the CD from the DVD drive.
● Uninstalling the CR-IR 391CL system program
11. Restart the PC.
NOTE In case of a dual-monitor configuration, back up the setting file (C:\Program Files\ FujiFilm\Hobbit\System\FDDSettingInfo.ini) for the free drawing function before uninstalling the client application.
1.
Start up the PC. ➔ The CR-IR 391CL starts up automatically.
2.
Shut down the CR-IR 391CL server.
3.
Insert the CR-IR 391CL application CD into the DVD drive.
Select “FCR Application” and click the [Uninstall] button. ➔ The “Do you wish to delete FCR Application from your computer?” window opens.
7.
Click [Yes]. ➔ The Windows Installer goes up and running to start uninstallation processing.
8.
Wait until “FCR Application” (in the window where progress bar is present) disappears automatically.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 2-1
Appx MC 2-2 10. Restart the PC.
● Installing the CR-IR 391CL system program NOTE
➥ REFERENCE
Because the CR-IR 391CL application installer changes the system files, the PC may be restarted without displaying any confirmation message, depending on the Windows Installer version. In such cases, log in the system anew and then perform processing continuously.
Settings before version upgrade are taken over as they are after version upgrade processing is performed.
1.
Log in the system by entering “fujicr” as the username and “system” as the password.
2.
Insert the CR-IR 391CL application CD into the DVD drive.
Click [Next]. ➔ The installer starts up and the “Welcome to the InstallShield Wizard for the FCR Application” window opens.
7.
Click [Install]. ➔ A window opens to indicate progress of installation processing, which takes about 2 minutes to finish.
8.
Click [Finish]. ➔ The system returns to the installation launcher window.
9.
Remove the CD from the DVD drive.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 2-2
Appx MC 2-3 ● Confirmation of version upgrade
1.
The software version displayed in the lower-right of the startup window should be correct.
2.
The CR-IR 391CL system should start up unfailingly.
3.
There should be no errors in the event log (Control Panel ➔ Administrative Tools ➔ Event Viewer ➔ Windows Logs ➔ Application) and the source name “MsInstaller.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 2-3
Appx MC 2-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 2-4
Appx MC 3-1
Appendix 3 Option Key / AP Key Installation
The installation procedure is described below. The same installation procedure applies to all the option keys.
1. Option Key Installation
When installing an option key or the AP key, network to the CR-IR 391CL system must have been established properly. Be sure to check the network connection and then install an option key or the application key.
Install the option keys as follows.
NOTES Each option key is supplied on one dedicated CD-ROM for each product. After option key installation, be sure to install the AP key. The reason is that installing the option keys disables the AP key that has been enabled. CD label
NOTE
1.
Insert an option key CD into the DVD drive.
2.
Select “Computer” from the
menu and
double-click “DVD RW drive (D:)”.
Description
➔ A window opens to indicate the completion of installation.
MFP Key Software
MFP image processing function
–
DICOM Print Key Software
DICOM print function
–
Free Layout Print Key Software
Free layout print function
–
DICOM Standard CR Storage Key Software
DICOM CR Storage output function
“Appendix 1” in “Appx IN: Installation – Appendix”
DICOM ID MWM Key Software
DICOM MWM patient information function
“Appendix 3” in “Appx IN: Installation – Appendix”
The indication varies with the option key for installation.
IN000443.ai
3.
Click [Continue]. ➔ A window opens to indicate the completion of installation. The indication varies with the option key for installation.
IN000444.ai
4.
Click [OK]. ➔ The system returns to the desktop screen.
020-221-02E 01.08.2010 FM5563
5.
Remove the CD from the DVD drive.
6.
To install another option key, change the CD and repeat Steps 2 through 5 as appropriate.
CR-IR 391CL Service Manual
Appx MC 3-1
Appx MC 3-2
2. AP Key Installation Install the AP key as follows.
5.
Remove the CD from the DVD drive.
6.
Restart the PC.
NOTE Install the AP key after all the option keys have been installed appropriately. The reason is that installing the option keys disables the AP key that has been enabled, requiring it to be reinstalled anew. Install the AP key as follows:
Click [Continue]. ➔ A window opens to indicate the completion of installation.
CBS03156.ai
4.
Click [OK]. ➔ The system returns to the desktop screen.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 3-2
Appx MC 3-3 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 3-3
Appx MC 3-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 3-4
Appx MC 4-1
Appendix 4 Setting the RU-Config
II. Click [OK]. ➔ The “Select Server Application Behavior” window opens.
NOTES Verify that Explorer or other application is not running. If any applications are running, exit them. Start the setting work with the CR-IR 391CL shut down accordingly.
■ Preparatory work: Shutting down the CR-IR 391CL If and when the CR-IR 391CL is up and running, exit it using the following procedure:
1.
If the CR-IR 391CL client is up and running, exit it.
CBS03158.ai
III. Select “Exit” and click [OK].
2.
● When in the login window: I. Click [Finish] in the lower left corner of the login window.
If the CR-IR 391CL server is up and running, exit it. I.
Right-click the icon representing the CR-IR 391CL server in the task tray at the bottom right of the desktop screen.
➔ The CR-IR 391CL client terminates and the desktop screen opens.
● When in the Study List window: I. Click [Close] in the upper left corner of the Study List window. ➔ The following confirmation dialog box opens.
IN000402.ai
The following right-click menu opens.
CBS03159.ai
CBS03157.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 4-1
Appx MC 4-2 ■ Setting the RU-Config
II. Click [Shut Down]. The confirmation window opens.
For setting up RU-Config property, see “MU:1.14 EDIT CONFIGURATION” of “CR-IR 391RU Service Manual”.
CBS03160.ai
III. Click [OK]. The following window opens indicating that the termination is in progress. Upon completion of the termination process, The system returns to the desktop screen. IV. Make sure that there is no CR-IR 391CL server icon on the task tray.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 4-2
Appx MC 4-3 ■ Checking the Connection
1.
Start up the Service Utility. For the procedure to start up the RU’s Service Utility, see “2. Starting, Logging-in to, and Exiting the Service Utility” under “MU: Maintenance Utility.”
➔ The “Service Utility top” window opens.
2.
Click [Connection check]. ➔ The “Connection Check” window opens.
3.
Click the down-arrow button beside [RU0] under “Check connection to the host equipment” and select the appropriate RU from the pull-down menu that appears. ➔ Its host name appears. If there is no host name, an IP address appears instead.
4.
Click [Verify connection]. ➔ A command prompt window opens. If the following message is displayed four times on the command prompt window, the connection is in proper working order.
Reply from 172.16.1.10: bytes=32 time<10ms TTL=128
➥ REFERENCE Values for “time<10ms” and “TTL=128” in the message above vary depending on the network status. Connection remains normal even though such values vary.
5.
Click the command prompt window’s command prompt.
button to terminate the
➔ The system returns to the “Connection Check” window.
6.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
7.
Click [EXIT]. ➔ The system returns to the desktop screen.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 4-3
Appx MC 4-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 4-4
Appx MC 5-1
Appendix 5 Procedures for Changing the CR-IR 391CL, RU, and Printer IP Addresses
1. Incorporating into the Network In compliance with the hospital network specifications, connect the CR-IR 391CL and RU network cables to the hospital’s network.
This appendix explains about the procedures for changing the CR-IR 391CL, RU, Printer IP addresses. The IP addresses need to be changed in the following case: When the CR-IR 391CL, RU, Printer IP addresses need to be changed for hospital network management purposes
NOTE If the IP address of the CR-IR 391CL has been changed, it becomes necessary to change the RU-Config accordingly. Conversely, if the IP address of the RU has been changed, it is necessary to make a setting change using the CR-IR 391CL’s Service Utility. If a setting change is made on either one alone, it becomes impossible to establish a connection.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 5-1
Appx MC 5-2
2. Changing the Software Settings 2.1 Changing the CR-IR 391RU IP Address
2.2 Changing the Printer IP Address 2.3 Making a setting change using the CR-IR 391CL’s Service Utility
2.1 Changing the CR-IR 391RU IP Address 1.
Change the “RU IP Address” setting. For details, see “MU 4.3 [1]” of “CR-IR 391RU Service manual”.
NOTE After changing RU-IP Address, reflect the setting to “FF-WakeOnLAN Utility”. For detail, see “Appendix 6: Setting up WakeOnLAN”.
2.4 Changing the CR-IR 391RU Setting
2.5 Changing the Service PC IP Address
2.6 Changing the CR-IR 391CL IP Address
2.7 Restart the CR-IR 391CL , RU, and Printer
2.2 Changing the Printer IP Address For the procedure to make the setting, see the Service Manual of the DRYPIX 1000/2000/3000/4000/7000/PRIMA. See “IN: Installation” in the Service Manual of the DRYPIX 1000/3000. See “IN: Installation” in the Service Manual of the DRYPIX 2000. See “IN: Installation” in the Service Manual of the DRYPIX 4000.
2.8 Verifying the connection after IP address changes
See “IN: Installation” in the Service Manual of the DRYPIX 7000. See “IN: Installation” in the Service Manual of the DRYPIX PRIMA.
NOTE After changing Printer-IP Address, reflect the setting to “FF-WakeOnLAN Utility”. For detail, see “Appendix 6: Setting up WakeOnLAN”.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 5-2
Appx MC 5-3 2.3 Making a setting change using the CR-IR 391CL’s Service Utility
2.
Within 3 seconds of the display of the initial window, sequentially click its upper left and upper right corners. Click the upper left corner first, and then the upper right corner.
NOTE In the case of changing the CR-IR 391CL’s own IP address, making an IP address change via the control panel of Windows alone does not affect the setting on the connection destination side. Such a setting will be reflected by opening the “Server Equipment settings” window in the Service Utility and then clicking the [OK] button. If the IP address on the “Server Equipment settings” window has not been updated to the new value, exit the Service Utility once, and perform Steps 1 through 10 again.
00000118.ai
➔ The Service Utility starts up and the “Service Utility top” window opens.
➥ REFERENCE
1.
On the desktop screen, double-click the
If you have failed to perform Step 2 within 3 seconds of the display of the initial window and the application started up, perform the following procedure and then take the above Steps 1 and 2 again.
icon.
➔ The CR-IR 391CL starts.
1. To terminate the application, click [Exit] on the login window. 2. Right-click the icon representing the CR-IR 391CL server in the task tray at the bottom right of the desktop screen. ➔ From the pop-up menu that appears, choose [Shut Down]. For the procedure to exit the CR-IR 391CL when it is up and running, see “ ■ Preparatory work: Shutting down the CR-IR 391CL” in “Appendix 4: Setting the RU-Config.”
3.
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
4.
Click [Image Reader]. ➔ The “Settings necessary for the Image Reader” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 5-3
Appx MC 5-4 5.
Enter the changed IP address (e.g. 172.16.1.10).
8.
Check that the new value is shown in the IP address field and then click [OK].
CBS03161.ai
6.
Click [OK]. ➔ The system returns to the “Setting connection devices” window.
➔ The system returns to the “Setting connection devices” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 5-4
Appx MC 5-5 9.
12. Check that the new value is shown in the IP address field and then
Click [Film Printer]. ➔ The “Settings necessary for the film printer” window opens.
click [Finish].
10. Select the printer and click [Change].
CBS93003.ai
➔ The system returns to the “Service Utility top” window. CBS93001.ai
11. Enter the changed IP address (e.g. 172.16.1.31) and click [Change].
13. Click [Exit]. ➔ The system returns to the desktop screen.
CBS93002.ai
➔ The system returns to the “Settings necessary for the film printer” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 5-5
Appx MC 5-6 2.4 Changing the CR-IR 391RU Setting 1.
Change the “MASTER CL” setting. For details, see “MU:1.15 EDIT CL NAME” of “CR-IR 391RU Service manual”.
2.
Change the “FTP Server IP Address” setting. For details, see “MU 4.3 [1]” of “CR-IR 391RU Service manual”.
020-221-01E 04.28.2009 FM5535
2.5 Changing the Service PC IP Address For the procedure to make the setting, see the Service Manual of the DRYPIX 1000/2000/3000/4000/7000/PRIMA. See “IN: Installation” in the Service Manual of the DRYPIX 1000/3000. See “IN: Installation” in the Service Manual of the DRYPIX 2000. See “IN: Installation” in the Service Manual of the DRYPIX 4000. See “IN: Installation” in the Service Manual of the DRYPIX 7000. See “IN: Installation” in the Service Manual of the DRYPIX PRIMA.
CR-IR 391CL Service Manual
Appx MC 5-6
Appx MC 5-7 2.6 Changing the CR-IR 391CL IP Address
8.
Click [OK]. ➔ The system returns to the “Local Area Connection Properties” window.
1.
Select [Control Panel] from the
menu.
9.
➔ The “Control Panel” window opens.
2.
➔ The system returns to the “Local Area Connection Status” window.
Double-click “Network and Sharing Center”.
10. Click [Close].
➔ The “Network and Sharing Center” window opens.
3.
Select “Manage network connection” in the left side of the window.
➔ The system returns to the “Network Connections” window.
11. Close the “Network Connections” window.
➔ The “Network Connections” window opens.
4.
Click [OK].
➔ The system returns to the desktop screen.
Double-click “Local Area Connection.” ➔ The “Local Area Connection Status” window opens.
5.
Click [Properties]. ➔ The “Local Area Connection Properties” window opens.
6.
Select “Internet Protocol Version4 (TCP/IPv4)” and click [Properties]. ➔ The “Internet Protocol Version4 (TCP/IPv4) Properties” window opens.
7.
Perform the following setup steps: I.
II.
2.7 Restart the CR-IR 391CL , RU, and Printer 1.
Restart the CR-IR 391CL.
2.
Restart the RU.
3.
Restart the Printer.
00000430.EPS
I.
Enter a new CR-IR 391CL IP address (e.g., 172.16.1.21). II. Enter a subnet mask.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 5-7
Appx MC 5-8 2.8 Verifying the connection after IP address changes 1.
On the desktop, double-click the
3.
Set the cassette in the RU’s cassette setting unit and make sure that images are transferred to the CR-IR 391CL.
4.
Click [EXIT]. ➔ The CR-IR 391CL exits and the system returns to the desktop screen.
icon.
➔ The CR-IR 391CL starts up in about one minute. The RU initialization message appears on the CR-IR 391CL monitor. The RU becomes available in about two minutes.
CBS03163.ai
➥ REFERENCE If the RU initialization message does not appear on the CR-IR 391CL’s monitor, restart both the CR-IR 391CL and RU.
2.
From the CR-IR 391CL user window (Registration), set patient data and exposure menu, and then click [Study start]. ➔ Both the CR-IR 391CL-AP window lamp and the RU panel’s cassette insertion lamp go on.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 5-8
Appx MC 6-1
Appendix 6 Setting up WakeOnLAN
3.
Click
.
➔ The Tool Application Setup window opens.
This section describes how to set up the “WakeOnLAN” feature that automatically starts up the Image Reader in conjunction with the startup of the CR-IR 391CL.
NOTE Turn off the UAC before installation. After the installation, turn on the UAC. For details, see “■ Setting the User Account Control” under “1.3.1 Installing and Setting Windows Vista”.
1. Installing the WakeOnLAN Utility 1.
Insert the CR-IR 391CL application CD into the DVD drive.
Check the “RU NAME” and “RU IP ADDR” values for the RU you want to automatically wake up or start up. From the “LIST OF EXISTING RU,” select the RU to automatically start up, and click [MUTL].
RU TYPE CR-IRxxx: Model name of the RU to be connected is displayed.
INAppL0008.EPS
4.
Check the [MAC Address Display].
CBS03177.ai
➔ The “RU PC-TOOL/MUTL” window opens.
INAppL0009.EPS
5.
Close the “RU PC-TOOL/MUTL” window. ➔ The system returns to the RU PC-TOOL window.
6.
020-221-01E 04.28.2009 FM5535
Close the RU PC-TOOL window.
CR-IR 391CL Service Manual
Appx MC 6-3
Appx MC 6-4
3. How to Acquire the Printer’s MAC Address For detail see “2.4 Details of PC-Utility Commands” under “MU:SERVICE MODE” of the “DRYPIX PRIMA Service Manual”.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 6-4
Appx MC 6-5
4. Registering the Other Equipment
3.
Specify the following settings.
Register the other equipment you want to automatically start up in the following procedure.
1.
I.
From the [Start] menu, select [All Programs]-[Fuji Film][FF-WakeOnLAN Utility]. ➔ The “WakeOnLAN Utility” window opens.
IV.
II. III.
CBS03171.ai
I. II. III. IV.
4.
Click [OK]. ➔ The system returns to the previous window.
CBS03170.ai
2.
Enter the MAC address of the other equipment (Ex.: 00-c0-2d-13-4e-37). Enter the IP address of the other equipment (Ex.: 172.16.1.10). Enter the host name of the other equipment (Ex.: ruO). Make sure that the box is checkmarked (if you just want to register the equipment only but do not want to wake it up, uncheck the box).
From the [Edit] menu, select [Register]. ➔ A window to register other equipment opens.
CBS03172.ai
5.
020-221-01E 04.28.2009 FM5535
To register the second and subsequent pieces of other equipment, if any, repeat Steps 2 through 4.
CR-IR 391CL Service Manual
Appx MC 6-5
Appx MC 6-6 6.
Bring the other equipment into a standby state.
7.
Select the other equipment on the list, and click [Select].
9.
When you see that the other equipment has started, click [Save]. ➔ The confirmation window opens.
➔ The equipment’s MAC address and host name appear on the right side.
CBS03175.ai
10. Click [Yes]. ➔ The system returns to the “WakeOnLAN Utility” window.
11. Perform procedures from No.2 to No.10, register information about your computer.
12. Click [Exit]. CBS03173.ai
8.
➔ The confirmation window opens.
Click [Send Packet]. ➔ The result of sending the packet appears to the right of the button.
CBS03176.ai
13. Click [Yes]. ➔ The system returns to the desktop screen.
NOTE Return the UAC to on. For details, see “1.10.5 Setting the User Account Control (Activate)”.
CBS03174.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 6-6
Appx MC 6-7
5. Testing Automatic Startup After setting up the WakeOnLAN feature, check to see that the RU automatically starts up in conjunction with the startup of the CR-IR 391CL.
1.
If the PC is up and running, turn OFF the PC.
2.
If the RU is up and running, turn OFF the breaker switch in the lower portion of the RU’s side.
3.
If the DRYPIX PRIMA is up and running, turn OFF the breaker switch in the lower portion of the DRYPIX PRIMA’s side.
4.
Turn ON the RU’s breaker switch alone.
5.
Keep pressing the Stand-by switch to bring the RU into stand by state.
6.
Turn ON the DRYPIX PRIMA’s breaker switch alone.
7.
Turn ON the PC, and start up the CR-IR 391CL application. At this time, check to see that the RU and DRYPIX PRIMA which has been in its standby mode turns ON now and startup operation is performed.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 6-7
Appx MC 6-8 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 6-8
Appx MC 7-1
Appendix 7 Uninstalling APs This appendix describes the procedures for uninstalling the following APs: CR-IR 391CL RU-AP RU PC-TOOL
1. CR-IR 391CL 1.
Select “Control Panel” from the
menu.
➔ The “Control Panel” window opens.
2.
Double-click [Program and Features]. ➔ The “Program and Features” window opens.
3.
Select the FCR Application. ➔ The selected item is then highlighted.
4.
Click [Uninstall]. ➔ A confirmation window opens.
5.
Click [Yes]. ➔ The uninstallation window opens. After a while, a command prompt window opens.
NOTE Although a message saying “Preparing to install” opens on the screen, what is actually going to be performed is uninstallation. ➔ After some seconds, a message saying “Press any key to continue...” opens in the command prompt window.
6.
Press the key. ➔ The command prompt window closes. Uninstallation processing continues. When it has finished, the system returns to the “Add or Remove Programs” window.
7.
020-221-01E 04.28.2009 FM5535
Close the “Program and Features” window and Control Panel.
CR-IR 391CL Service Manual
Appx MC 7-1
Appx MC 7-2
2. RU-AP To uninstall the RU-AP, use the RU PC-TOOL. For detail see “RU Service Manual”.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 7-2
Appx MC 7-3
3. RU PC-TOOL NOTE Use the RU-CD to uninstall the RU PC-TOOL. Do not uninstall the RU PC-TOOL from “Program and Features” in Control Panel because an improper uninstallation results.
For detail see “RU Service Manual”.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 7-3
Appx MC 7-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 7-4
Appx MC 8-1
Appendix 8 Setting the BIOS 1. Setting the Dell OptiPlex 760/780 ■ Setup Items Set up each value of items in the table below. Item Drives Performance
Description
Setup Value
SATA-2
Off
Multi Core Support
On
SpeedStep
Off
■ Setup Procedure
1.
Turn ON the monitor and PC power switches. ➔ The PC starts running.
2.
Press the key when “F12 Boot Options” appears at the upper right corner of the window.
3.
Select “Performance” – “Multi Core Support” and place a checkmark to “Enable Multi Core Support”. Settings General
Multi Core Support Enable Mutli Core Support
Drives System Configuration Video Performance
This field specifies whether the p performance of some application
Multi Core Support Intel(R) SpeedStep TM C States Control Limit CPUID Value HDD Acoustic Mode MCApp06006.ai
➔ When the setting is changed, [Apply] become active at the lower right corner of the window.
4.
Click [Apply].
5.
Click [Exit]. ➔ The PC restarts.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 8-1
Appx MC 8-2 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 8-2
Appx MC 8-3 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 8-3
Appx MC 8-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MC 8-4
Appx MC 9-1
Appendix 9 Procedure for Changing the Computer Name
1. Changing the Computer Name 1.
■ Preparatory work
2.
Double-click
.
➔ The “System” window opens.
■ Overall operation flow 1. Changing the Computer Name
menu.
➔ The “Control Panel” window opens.
Prior to starting the necessary work, check the following. Terminate currently used software including the CR-IR 391CL. Also terminate applications displayed in the task tray if possible.
Select [Control Panel] from the
3.
Click “Change settings”.
2. Registering with the Service Utility 2.1 Starting the Service Utility 2.2 Cautions when an Error is Displayed
3. Checkup Work
MCApp12001.ai
➔ The “System Properties” window opens.
MCApp12002.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 9-1
Appx MC 9-2 4.
Click
7.
.
➔ The “Computer Name/Domain Changes” window opens.
5.
Change “Computer name:”, and click
Confirm that the changed computer name is shown, and click .
.
MCApp12005.ai
➔ The confirmation window for restarting opens. MCApp12003.ai
➔ The confirmation window for restarting opens.
MCApp12006.ai
MCApp12004.ai
6.
8.
Click
.
➔ The PC restarts.
Click
.
➔ The system returns to the “System Properties” window.
9.
After the PC is restarted, input the following when the login window opens. Click then [OK]. Username : fujicr
Password : system For the procedures that follow, see “2.1 Starting the Service Utility.”
NOTE Be sure to start the service utility right after logging in. If the application starts up automatically without implementing the service utility, “49500 error” and “20110 error” occur.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 9-2
Appx MC 9-3
2. Registering with the Service Utility
4.
Confirm that the changed computer name is shown for “Host name”.
➥ REFERENCE At this time, the computer name is retrieved automatically from the system settings, registered to the database, and it is saved when exiting the service utility.
2.1 Starting the Service Utility NOTE After changing the system settings, be sure to start the service utility. By starting the service utility, the computer name is automatically retrieved from the system settings and registered to the database.
1.
After restarting the OS, start the service utility. For the starting procedures for the service utility, see “2. Starting, Logging-in to, and Exiting the Service Utility” under “MU: Maintenance Utility.”
➔ The “Service Utility top” window opens.
2.
➔ The “Simplified setup wizard” window opens.
3.
MCApp12009.ai
Click [Simplified setup wizard].
Click [Next] several times until the “Server equipment settings” window opens. ➔ The “Server equipment settings” window opens.
5.
Click [Next] several times until the “Service Utility top” window opens. ➔ The system returns to the “Service Utility top” window.
6.
Click [EXIT]. ➔ The system returns to the desktop screen.
7.
Double-click the CR-IR 391CL server application icon. ➔ CR-IR 391CL starts up.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 9-3
Appx MC 9-4 2.2 Cautions when an Error is Displayed When CR-IR 391CL starts up without starting the service utility, the following error window opens.
3. Checkup Work For detailed procedures, see “5. Checkup Work” under “IN: Installation.”
MCApp12007.ai
When the error window opens, perform the following procedures.
1.
Click
.
➔ The following error window opens.
MCApp12008.ai
2.
Click
3.
Perform “2.1 Starting the Service Utility”.
.
After implementing the simplified setup wizard of the service utility, the error will not be displayed.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MC 9-4
MU-I
CR-IR 391CL Service Manual
MU: Maintenance Utility
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-I
MU-II
MU: Maintenance Utility
Control Sheet Issue date
Revision number
04/28/2009 01/08/2010
01 02
020-221-02E 01.08.2010 FM5563
Reason
Pages affected
New release (FM5535) Revision for software V1.1(B) (FM5563)
All pages 2, 11, 17, 27, 28, 32, 41 to 45, 59, 104 to 106 Appx MU 1-2, 3, 7, 2-1, 4, 3-1, 2, 4, 4-1, 2, 5-1
Changes in pagination (FM5563)
46 to 58, 60 to 103
CR-IR 391CL Service Manual
MU-II
MU-1
1. Overview of Service Utility Functions Service utility tools used for installing or servicing the CR-IR 391CL are collectively referred to as the “Service Utility.”
REFERENCE For backing up or restoring data for servicing purposes, use a utility named “Backup Utility”, which differs from the “Service Utility.” The main functions of the Backup Utility are as follows:
■ Service settings System Performs setup concerning, for instance, the user environment, operating style, and image processing.
Connected equipment Sets the equipment to be connected to the CR-IR 391CL. ❍ System gradation correction process setup Sets the gradation correction file (LUT).
Backup Backs up patient information, setup information, and log information.
Linkage function
Restore Restores patient information and setup information.
Film annotation characters
Collecting logs for maintenance purpose Collects log information. For details on the Backup Utility, see “Appendix 1: Backup Utility.” This section describes the details of the Service Utility. The Service Utility has the following functions:
NOTE To operate the CR-IR 391CL system program (including utility programs), Windows Explorer must be shut down. Operating the program with Windows Explorer up and running may cause a problem, such as system hang-up or media error, to occur. However, this does not apply when the procedure where to start up from Windows Explorer is determined.
■ Simplified setup Simplified setup wizard Opens a wizard that steps you through the process of interactive setup.
Sets a function that can be exercised in coordination with external equipment. Sets the character string to be printed at the time of film output and specifies its format.
Person name Specifies the person name format.
■ Maintenance tools Database Utility Initializes or rebuilds a database.
Acquiring EDR backup data Acquires or stores EDR backup data about a local image.
Connection check Checks the connections to the equipment that is set through “● Connected equipment” under “■ Service settings.”
Log display/edit Displays or clears the number of IP exposures (IP exposure count).
Event log display Starts Event Viewer of the OS.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-1
MU-2
2. Starting, Logging-in to, and Exiting the Service Utility
When the PC power is ON
1.
This section describes the procedures for starting, logging-in to, and exiting the Service Utility.
IN000402.ai
Starting the Service Utility The procedure for starting the Service Utility differs depending on whether the CR-IR 391CL system power is ON or OFF.
2.
When the PC power is OFF
3.
1.
The right-click menu opens.
Click [Exit]. When the CR-IR 391CL shutdown message appears, click [OK]. The CR-IR 391CL shuts down.
Turn ON the PC power. Windows Vista starts up. After about one minute, the CR-IR 391CL starts.
2.
When the CR-IR 391CL is running, right-click the CR-IR 391CL server icon in the task tray, which is located in the lower right corner of the desktop screen.
When the initial window opens, sequentially click its upper left and upper right corners within a period of 2 to 3 seconds. Click the upper left corner first, and then the upper right corner.
4.
Double-click the
icon on the desktop.
The CR-IR 391CL starts in about 1 minute.
5.
When the initial window opens, sequentially click its upper left and upper right corners within a period of 2 to 3 seconds. Click the upper left corner first, and then the upper right corner.
00000118.ai
The “ServiceUtilityAuthentication” window opens.
00000118.ai
The “ServiceUtilityAuthentication” window opens.
MU00001 .ai
MU00001 .ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-2
MU-3 Logging-in to the Service Utility To log in to the Service Utility, enter a password for authentication. For details on Service Utility startup, see under “■ Starting the Service Utility.”
1.
Exiting the Service Utility
1.
In the “Service Utility top” window, click [EXIT].
Start the Service Utility. The “ServiceUtilityAuthentication” window opens.
MU00001 .ai
2.
Enter the password “fieldengineer.”
NOTES Enter the password by using 1-byte lower-case characters. The entered password characters appear as asterisks (*).
3.
MU000001.ai
The system returns to the desktop screen.
Click [OK]. ➔ The “Service Utility top” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-3
MU-4
3. Top Window
XI. For details on the procedure for “Log display/edit”, see under “7.4 Log Display/Edit.”
The Service Utility top window, which opens upon login, looks like the figure below.
XII. For details on the procedure for “Event log display”, see under “7.5 Event Log Display.”
I. II.
VIII.
III.
IX.
IV.
X.
V.
XI.
VI. VII.
XII.
MU000028.ai
I.
For details on the setup procedure for use with the “Simplified setup wizard”, see under “5. Simplified Setup Wizard.”
II.
For details on the procedure for setting the “System”, see under “6.1 System.”
III. For details on the procedure for setting the “Connected equipment”, see under “6.2 Connected Equipment.” IV. For details on the procedure for setting the “Linkage function”, see under “6.3 Linkage Function.” V.
For details on the procedure for setting the “Film annotation characters”, see under “6.4 Film Annotation Characters.”
VI. For details on the procedure for setting a “Person name”, see under “6.5 Person Name.” VII. For details on the procedure for “Modality setting”, see under “6.6 Modality Settings.” VIII. For details on the procedure for the “Database Utility”, see under “7.1 Database Utility.” IX. For details on the procedure for “Acquiring EDR backup data”, see under “7.2 Acquiring EDR Backup Data.” X. For details on the procedure for “Connection check”, see under “7.3 Connection Check.” 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-4
MU-5
4. Regional and Language Options Settings Prior to performing necessary settings using the Service Utility functions, perform OS settings according to the region where the equipment is to be installed.
1.
3.
Click the “Formats” tab to select a language (region) to use from the “Current format” pull-down menu.
4.
Click [Customize this format]. ➔ The “Customize Regional Options” window then opens.
5.
Select [Control Panel] from the [Start] menu.
Select the “Date” tab.
➔ The Control Panel is displayed. If the window is not in the Classic View mode, click [Classic View] to change the display to Classic View.
2.
Double-click [Regional and Language Options]. ➔ The “Regional and Language Options” window opens. MU000403.ai
MU000402.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-5
MU-6 6.
Following examples shown in the table below, enter a date from the keyboard in the [Short date:] box of the [Date formats] field.
9.
Select the “Time” tab.
CAUTION A date entered will not be displayed correctly if the order to display “year/ month/day” used in the CR-IR 391CL system is different from that of the OS date format. Because this is used for important information, including the date of study and the like, it is essential to perform a date setting on the OS side carefully at this step. For details of settings of the date format used in the CR-IR 391CL system, see under “5.3 System Settings.” Date format used in the CR-IR 391CL
Date format used in the OS’ short “Date” format
Japanese date (S62.10.07)
yy/MM/dd
ANSI long date (1987.OCT.07)
yyyy/MM/dd
ANSI short date (1987.10.07)
yyyy/MM/dd
American long date (OCT.07.1987)
MM/dd/yyyy
American short date (10.07.1987)
MM/dd/yyyy
European long date (07.OCT.1987)
dd/MM/yyyy
European short date (07.10.1987)
dd/MM/yyyy
* Enter directly from the keyboard because some formats are not displayed in the pull-down menu.
7.
Similarly, perform settings for the [Long date] field.
NOTE When doing so, observe the order of entering “year/month/day” in the short date format determined at Step 6 above.
8.
Click [Apply].
MU000404 ai
10. Select [HH:mm:ss] or [H:mm:ss] for the [Time format:] box setting. CAUTION Do not use “tt” representation. The CR-IR 391CL database will not be displayed correctly if [tt hh:mm:ss] or [tt h:mm:ss] is specified for the time format.
11. Click [OK]. ➔ The system returns to the “Regional and Language Options” window.
12. Click [OK]. ➔ The system returns to the Control Panel.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-6
MU-7 Defining the character to be used as a decimal point
3.
Select “.” (period) as the character to be used as a decimal point. If anything other than a period is selected, an error occurs when you select an image distribution destination with the QA function.
1.
Check to see that the character specified in the “Decimal symbol” field is “.” (period). If not, change it to “.” (period). If, as a result of the above selection, the same symbol is selected for the “Digit grouping symbol” and “Decimal symbol” fields, change the symbol for the “Digit grouping symbol” field.
In the “Control Panel” window, double-click “Regional and Language Options.” The “Regional and Language Options” window opens.
2.
Make sure that the “Formats” tab is selected and click [Customize this format].
RI000228.ai RI000226.ai
The “Customize Regional Options” window opens.
4.
Click [OK]. The system returns to the “Regional and Language Options” window.
5.
Click [OK]. The system returns to the Control Panel.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-7
MU-8
5. Simplified Setup Wizard The simplified setup wizard interactively performs the following setup procedures in the order named. The setup items vary with the selected options.
5.1 Starting the Simplified Setup Wizard 1.
Start the Service Utility. ➔ The “Service Utility top” window opens.
5.1 Starting the Simplified Setup Wizard 5.2 Setting the Date and Time 5.3 System Settings 5.4 Server Equipment Settings 5.5 Setting the Image Reader 5.6 Setting the Film Printer (option) 5.7 Storage Setup for DICOM Storage Device (option) 5.8 Exiting the Simplified Setup Wizard MU000501.ai
This section describes the procedure to be performed when all the options are selected.
2.
Click [Simplified setup wizard]. ➔ The “Setting PC (OS) date/time” window of the Simplified setup wizard opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-8
MU-9 2.
5.2 Setting the Date and Time
Check the date, time, and time zone.
NOTE Carefully check the date and time because they are important values for the study date and exposure time.
If the date, time, and time zone are incorrect, correct them and then click [Apply].
00000115.ai
MU000502.ai
1.
Click [Date/time change]. The “Date and Time Properties” window opens.
3.
Click [OK]. The system returns to the “Setting PC (OS) date/time” window.
4.
Click [Next]. The “System settings” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-9
MU-10 5.3 System Settings Use the “System settings” window to perform setup concerning the institution name, date/time format, and patient name format (Kanji), and the like.
1.
Enter “Institution name represented by single-byte alphanumerics (essential).”
2.
Click the downward arrow mark ( select it.
) for “Year/month/day format” to
CAUTION If the “year/month/day” format has been changed, be sure to change the setting of the OS’ “short date” format as well. For details of the necessary setting, see “4. Regional and Language Options Settings.” Setting Japanese date (S62.10.07) ANSI long date (1987.OCT.07)
Description Year+YY.MM.DD YYYY.MONTH.DD
ANSI short date (1987.10.07)
YYYY.MM.DD
American long date (OCT.07.1987)
MONTH.DD.YYYY
American short date (10.07.1987)
MM.DD.YYYY
European long date (07.OCT.1987)
DD.MONTH.YYYY
European short date (07.10.1987)
DD.MM.YYYY
: Default
3.
Click the downward arrow mark ( select a time format.
) for “Time format”, and then
Setting
MU000503 ai
HH:MM:SS AM
HH:MM:SS
Description 12-hour format 24-hour format
: Default
4.
Ensure that the [Inputting a patient name by multi-byte characters] check box is not checkmarked.
5.
Click [Next]. ➔ The [Setting the “Server Equipment”] window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-10
MU-11 4.
5.4 Server Equipment Settings
Click [Selection] under “Monitor model.”
➤ IMPORTANT
Use the “Setting the Server Equipment” window to perform setup concerning the CR-IR 391CL server equipment name, software keyboard, monitor, and the like.
For a locally procured LCD monitor, be sure to perform the procedure below: I.
Insert an FD where the LUT file is stored into the FD drive.
II. Click “Update” on the “Monitor model selection” window. III. Select an LUT for the added model and click [OK]. ➔ The “Monitor model selection” window opens.
MU000504.ai MCApp13001.ai
1.
Enter the “Equipment name” (host name).
2.
Verify that CVXXXXXXXX is entered as the “Host name” and that 172.16.1.20 is entered as the IP address.
3.
For details on monitor models, see under “6.2.2 Monitor Settings.”
5.
Select a monitor model and then click [OK]. ➔ The system returns to the [Setting the “Server Equipment”] window.
(NOTE: The “XXXXXXXX” portion represents an 8-digit serial number.)
NOTE
To use the software keyboard, put a checkmark in the “Use” check
The monitor settings are automatically entered. Although the “Magnified Display (%)” setting can be changed, do not change it now.
box under
(
➔
).
➥ REFERENCE The Software keyboard function is not implemented in V1.1(B) or later.
For details, see “6.2.2 Monitor Settings.”
6.
Next, perform the following setup steps (DICOM and disk drive settings).
This setting is not working. 020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-11
MU-12 ● Set up DICOM (Media Storage setting) The procedure for setting information for this equipment concerning DICOM Media Storage is described below. DICOM Media Storage is used for image transfer to a DVD.
1.
2.
Enter an AE name (e.g., DVD) in the “AE Name” field under “Media Storage setting.”
3.
Click the downward arrow mark ( ) for “Maximum pixel density size for a stored image”, and then select a maximum pixel density size for a stored image.
Click [DICOM setting]. ➔ The “Set up DICOM” window opens.
Setting
Description
ST
Standard density
High density
HQ
: Default
➥ REFERENCE Selecting “HQ” decreases the number of images that can be recorded on a DVD. For the number of images that can be stored when the ST, HQ, compressed, or uncompressed option is selected, see under “1.6 Image Storage Performance” of “Product Specifications.”
4.
Click the downward arrow mark ( ) for “Whether or not to specify data compression for stored images”, and then select a stored image compression option. Setting Image data compressed
Description Compresses the image (lossless).
Image data not compressed Leaves the image uncompressed.
: Default
➥ REFERENCE Selecting “Uncompressed” decreases the number of images that can be recorded on a DVD. For the number of images that can be stored when the ST, HQ, compressed, or uncompressed option is selected, see under “1.6 Image Storage Performance” of “Product Specifications.”
MU050007.ai
➥ REFERENCE The following items shown within the frame on the window above appear only when the respective options are installed. : DICOM Print option “Print SCU settings” “Settings for Storage SCU” : DICOM Storage option 020-221-01E 04.28.2009 FM5535
5.
When storing two-byte character (Kanji or other multi-byte character) information, put a checkmark in the “Multi-byte character setup” check box under
CR-IR 391CL Service Manual
(
➔
).
MU-12
MU-13 ● Set up DICOM (Print SCU setting) The procedure for setting information for this equipment concerning DICOM Print is described below.
1.
4.
Put a checkmark in both the “BasicGrayscalePrint” and “Verification” check boxes under “Presentation Context” ( ➔ ).
➥ REFERENCE “Verification” is a service class for verifying the connection between DICOM devices. When verifying the connection, it is necessary to check “Verification.”
Click the “Print SCU setting” tab.
For details on connection verification, see under “7.3 Connection Check.”
5.
Click [OK]. ➔ The system returns to the [Setting the “Server Equipment”] window.
Click
MU050009.ai
2.
Enter an AE name (e.g., FCR-CSL) in the “AE Name” field under “Print SCU setting.”
3.
Specify the “Timeout value” (timeout value between DICOM messages: 300).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-13
MU-14 ● Set up DICOM (Settings for Storage SCU) (option) The procedure for setting information for this equipment concerning DICOM Storage output is described below.
1.
Click [DICOM setting]. ➔ The “Set up DICOM” window opens.
2.
Click the “Settings for Storage SCU” tab.
Click
MU050008.ai
3.
Enter an AE name (e.g., FCR-CSL) in the “AE Name” field under “Settings for Storage SCU.”
4.
Specify the “Timeout value” (timeout value between DICOM messages: 300).
5.
Click [OK]. ➔ The system returns to the [Setting the “Server Equipment”] window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-14
MU-15 ● Disk drive settings The procedure for setting the DVD drive that is to be connected to the server equipment (CR-IR 391CL machine).
1.
3.
Click [View] to specify the drive path. ➔ The “Browse for Folder” window opens.
Select the connected DVD drive (D:) and then click [OK]. ➔ The system returns to the “Disk drive settings” window.
5.
Click the downward arrow mark ( ) for “Disk format application type”, and then select a disk format application type (Dedicated application). Setting
Description
Not specified
Does not provide formatting.
Dedicated application
Provides formatting with the dedicated application.
OS
Provides formatting with an OS function.
: Default MU000507.ai
2.
Enter a management disk drive name (e.g., DVD) in the “Drive name” field under [Setting a “Disk Drive for Server Management”].
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-15
MU-16 6.
9.
Click [View] to specify the “Dedicated format application path.” ➔ The “Open” window opens.
Check what is selected for “Drive to be created” in “Set up “PDI”” and click [Edit].
MU060209.ai
➔ Notepad starts.
10. Input a facility name. N000209.ai
7.
11. From the “File” menu, select “Overwrite.”
Select “C:\Program Files\FujiFilm\Hobbit\System\ FFUdfFmtToolForVista.exe” on the folder selection window.
➔ “C:\Program Files\FujiFilm\Hobbit\System\FFUdfFmtToolForVista.exe” is input automatically in the “Dedicated format application path” field.
8.
Input “rD” to the end of the path (“r” represents a single-byte space and “D” represents a DVD drive path).
➥ REFERENCE After the input as directed above, the description in the “Dedicated format application path” field will be as follows.
The “Save as...” window opens.
12. Confirm the “Character Code” and click “Save.” NOTE Select “ANSI” or “Unicode” character code. Input data can be saved only when either “ANSI” or “Unicode” is selected.
13. Select “Close Notepad” from the “File” menu. ➔ Notepad window closes and the system returns to the “Disk drive settings” window.
14. Click [OK]. ➔ The system returns to the “Setting the “Server Equipment”” window. MU000529.ai
15. Click [Next]. ➔ The “Setting the Image Reader” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-16
MU-17 4.
5.5 Setting the Image Reader
Remove the Checkmark from “Use” in the “Check the box to use Patient information display” field ( ➔ ).
NOTE To have the patient information be displayed, the relevant setting must be turned ON also on the RU side. In case of 391RU, be sure to set to OFF. For details of the procedure to use, see “Appendix 4: Setting the RU-Config” in “MC: Checks, Replacement and Adjustment of Parts.”
5.
Click [Next]. ➔ The [Setting the “Film Printer”] window opens (this window does not open if the option key is not installed).
If the film printer is not to be connected, proceed as directed under “5.7 Setting for DICOM Storage Device (option).” If the general-purpose file output option is not selected, proceed as directed under “5.8 Exiting the Simplified Setup Wizard.”
MU000509.ai
1.
Enter an Image Reader name (default: Image Reader) in the “Equipment name” field.
2.
Enter an Image Reader host name (default: RU0) in the “Host name” field.
3.
Enter an Image Reader IP address (default: 172.16.1.10) in the “IP Address” field.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-17
MU-18 1.
5.6 Setting the Film Printer (option) When connecting the film printer (option), perform the film printer setup procedure described below.
Click [Add], or select the printer whose settings are to be changed and then click [Change]. ➔ The “Adding film printers” or “Changing film printers” window opens.
MU000511.ai
MU000510.ai
020-221-01E 04.28.2009 FM5535
2.
Enter a film printer name (e.g., Printer) in the “Equipment name” field.
3.
Enter a film printer host name (e.g., fujiprinter) in the “Host name” field.
4.
Enter a film printer IP address (e.g., 172.16.1.30) in the “IP Address” field.
5.
Enter a film printer AE name (e.g., DRYPIX) in the “DICOM AE name” field.
6.
Enter a film printer port number (e.g., 17238) in the “Port number” field.
CR-IR 391CL Service Manual
MU-18
MU-19 7.
8.
Click [Detailed settings]. ➔ The “Detailed settings for film printer” window opens.
Click [Printer model selection]. ➔ The “Selecting default settings specific to film printer model” window opens.
MU000513.ai
9.
Select a model and then click [OK]. ➔ The system returns to the “Detailed settings for film printers” window. In this instance, the settings for the selected model are displayed as default values.
10. Put a checkmark in both the “BasicGrayscalePrint” and “Verification” check boxes under “Supported abstract syntaxes” (
➔
).
➥ REFERENCE “Verification” is a service class for verifying the connection between DICOM devices. When verifying the connection, it is necessary to check “Verification.” MU000512.ai
020-221-01E 04.28.2009 FM5535
For details on connection verification, see under “7.3 Connection Check.”
CR-IR 391CL Service Manual
MU-19
MU-20 11. Under “Film sizes available for printout”, specify the film sizes that
➥ REFERENCE
12. Click the downward arrow mark (
In the default bin number field, specify a default bin that is used for film output when no collation value (collation based on the identification information) is complied with.
can be printed out. Put a checkmark in a check box (
➔
).
) for “Transferable image sizes”, and then select a reception image size. Setting
SH
Description Reception image size maximum density (ultra-high density). Reception image size maximum density (high density).
HQ
For bin numbers, see the printer service manual. III. Click [Setting details of bins]. ➔ The “Setting details of bins” window opens.
: Default
13. Click the downward arrow mark (
) for “Destination for film output”, and then select a film output destination. Setting
Description
Not specified
Complies with the printer setting.
MAGAZINE
Delivers the output to a magazine type printer.
PROCESSOR
Delivers the output to the ejection tray on the top of the printer.
Delivers the output to the sorter bin.
BIN_I
: Default
14. If “BIN_I” (sorter bin) is selected as the “Destination for film output”, perform the following setup steps: I.
Click the downward arrow mark ( ) for “Bin number identification information”, and then specify the bin number identification information. Setting
Description
MPM code
Identifies the output bin by MPM code.
Anatomical region
Identifies the output bin by anatomical region.
Not specified
Complies with the printer setting.
MU000514.EPS
IV. In accordance with the selection made under “Bin number identification information”, double-click the “Key” field and then enter a key. If “MPM code” is selected under “Bin number identification information”, enter an MPM code (e.g., 0200). If “Anatomical region” is selected, enter an anatomical region name (e.g., CHEST).
: Default
II. Click the or mark for “Default bin number” and then specify the default bin number, or enter a default bin number from the keyboard. MU000515.EPS
V. Double-click the “Bin number” field, and then enter a bin number.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-20
MU-21 15. If the “Image size specification function for printers” is supported, put a checkmark in
(
➔
).
(When the DRYPIX Series is used, be sure to check the check box because the function is supported.)
16. If the printer supports 10-bit image prints, put a checkmark in (
➔
).
(When the DRYPIX Series is used, be sure to check the check box because the 10-bit image prints are supported.)
17. Click the downward arrow mark ( film type.
Setting
) for “Film type” and then select a
19. Click the downward arrow mark (
) for “Dealing with an image not accommodated within the printer’s image area”, and then select the process to be performed for an image that is not accommodated within the printer’s image area. Setting
DECIMATE
Decimates.
CROP
Crops.
Not specified
Complies with the printer setting.
Does not generate an output because the image is not accommodated within a recordable image frame.
Not specified
Complies with the printer setting.
CLEAR FILM
Selects clear film.
FAIL
: Default
20. Click the downward arrow mark (
) for “How to magnify an image size”, and then select an image magnification method.
Description
Description
Setting
Description
REPLICATE
Provides interpolation by replicating a most similar neighboring color when creating a new pixel for magnification.
BILINEAR
Provides bilinear interpolation when magnifying the image.
BLUE FILM
Selects blue film.
Selects a paper printout (this option can be selected when a DICOM printer that can generate a paper output is connected).
CUBIC
Provides bicubic interpolation when magnifying the image.
Does not magnify or reduce the image.
PAPER
: Default * The DRYPIX Series cannot generate paper printouts.
18. Click the downward arrow mark (
) for “Maximum film density (Dmax)” and then specify the maximum film density. Setting
Description
3.0
Issues an output request to the printer with the maximum density set at 3.0.
Issues an output request to the printer with the maximum density set at 3.6.
3.6
: Default
NONE
: Default
➥ REFERENCE Bilinear interpolation When a new pixel is to be generated for magnification, its color is created by averaging the colors of four (linear) neighboring pixels (upper, lower, right, and left pixels). Bicubic interpolation When a new pixel is to be generated for magnification, its color is created by averaging the colors of eight (cubic) neighboring pixels (upper, lower, right, and left pixels and pixels at four corners).
NOTE The printer setting should be basically complied with. This setup step need not be performed for the DRYPIX Series. For details, see the printer service manual.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-21
MU-22 21. If “CUBIC” was selected in Step 20 as the image magnification
method, enter a smoothening type in the “Smoothening type” field. (If an image magnification method other than “CUBIC” was selected in Step 20, do not enter a smoothening type because the “Smoothening type” field does not become active.)
5.7 Setting for DICOM Storage Device (option) When the optional DICOM storage device is to be connected, perform the DICOM storage setup procedure described below.
NOTE For the DRYPIX Series, only the SMOOTH, MEDIUM, and SHARP options are selectable (SMOOTH is selected by the default).
22. Click [OK]. ➔ The system returns to the “Adding film printers” window.
23. Click [Add]. ➔ The system returns to the [Setting the “Film Printer”] window.
24. Verify that the added or changed film printer is displayed in the list.
MU000516.ai
25. Click [Next].
MU050001.ai
➔ The “Settings for DICOM Storage Device” window opens (this window does not open if the option key is not installed).
If the general-purpose file output option is not selected, proceed as directed under “5.8 Exiting the Simplified Setup Wizard.”
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-22
MU-23 1.
Click [Add], or select the DICOM storage device whose settings are to be changed and then click [Change].
7.
Click [Detailed settings]. ➔ The “Advanced settings for DICOM Storage Device” window opens.
➔ The “Addition of DICOM Storage Device” or “Change of DICOM Storage Device” window opens.
MU050002.ai
2.
MU050003.ai
Enter the name of the DICOM storage device in the [Equipment name] field.
8.
Enter the host name of the DICOM storage device in the [Host name] field.
Put a checkmark in both the “CRImageStorage” and “Verification” check boxes under [Supported abstract syntaxes_transfer syntaxes].
9.
4.
Enter the IP address of the DICOM storage device in the [IP Address] field.
Perform setup for [Supported abstract syntaxes_transfer syntaxes] in accordance with the transfer syntax for the storage device.
10. Select “HQ” as the [Maximum pixel density size receivable].
5.
Enter the AE name of the DICOM storage device in the [DICOM AE name] field.
11. If the storage device supports multi-byte characters, put a checkmark
Enter the port number of the DICOM storage device in the [Port number] field.
12. Click [OK].
3.
6.
020-221-01E 04.28.2009 FM5535
in the “Supported” check box under [Setting multi-byte characters.].
➔ The system returns to the “Addition of DICOM Storage Device” or “Change of DICOM Storage Device” window.
CR-IR 391CL Service Manual
MU-23
MU-24 13. Click [Add].
5.8 Exiting the Simplified Setup Wizard
➔ The system returns to the [Settings for “DICOM Storage Device”] window.
MU000522.ai
1.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
The Simplified setup wizard is now closed.
➤ IMPORTANT For an output device set up using the Simplified setup wizard, be sure to use the User Utility to perform “Setting a destination for image output.”
The service settings are used, for instance, for a system configuration change or version upgrade.
Perform basic setup for the CR-IR 391CL system as directed below.
1.
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [System]. ➔ The “System settings” window opens.
MU000015.ai MU000002.ai
Name
Description
System
Performs basic setup for the CR-IR 391CL system.
Connected equipment
Performs setup for the equipment to be connected to the CR-IR 391CL.
Linkage function
Sets the function to be exercised in coordination with another system.
Film annotation characters
Sets the character string to be output onto film and specifies its format.
Person name
Performs setup for the conversion of an input person name.
Modality settings
Perform LUT setting corresponding to each modality.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-25
MU-26 3.
Click the downward arrow mark (
) for
4.
Double-click the “Setup value” field on the right-hand side.
to open the pull-down menu, and then select the category to be displayed. ➔ The items classified under the selected category appear in the “Setup item list.” The following categories are selectable: Setup value field
Localize setting Settings related to the date (year/month/day) and time. Setting for institution Settings related to a hospital name.
MU000003.ai
5.
Change the setup value. For details on the settings, see under “■ Settings accessible from the “System settings” window.”
Setting for entering patient name Settings related to patient name input. Setting for image collection Settings related to an image read.
● If the double-clicked field looks like field) I. Enter desired text from the keyboard.
Setting for image browsing Settings related to image display format changes in the viewer window. Setting for general-purpose file output Settings related to the output of a general-purpose file that can be viewed with another tool.
● If the double-clicked field looks like
Film character setting Settings related to a character string that is output together with an image.
I.
Setting for analysis Settings related to log acquisition.
Click the downward arrow mark (
) for
and
select a desired setup item from the pull-down menu.
● If the double-clicked field looks like
(upward and
downward arrow marks)
Setting for output function Settings related to image output. Operation (low frequency) setting Settings related to operations.
(pull-down
menu)
Image incidental information Setting related to the image process change flag. Print format Settings related to image output.
(direct input
I.
6.
Click the or and change the value as desired, or enter a desired value from the keyboard.
Click [OK]. ➔ The system returns to the “Service Utility top” window.
Settings for endoscopic image import Settings for support to import of endoscopic images. All All the above settings.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-26
MU-27 ■ Settings accessible from the “System settings” window ● Localize setting Number 1-1
Setup item name Date display format
Option
Description
❍ 0 : Japanese date (S62.10.07) 1 : ANSI long date (1987.OCT.07) ❍ 2 : ANSI short date (1987.10.07) ❍ 3 : American long date (OCT.07.1987) ❍ 4 : American short date (10.07.1987) ❍ 5 : European long date (07.OCT.1987) ❍ 6 : European short date (07.10.1987)
Date format (commonly applied to all date expressions including birth date input, display, and film output).
Remarks Simplified setup wizard
* The date format to be specified here must be the same, in terms of order of “year/month/day”, as the OS’ date format. For details see “4. Regional and Language Options Settings.”
Medical institution information that is output as a footer on a paper printout.
This option item is not used.
2-4
Institution information 2 (Use paper print.)
40 bytes max.
Medical institution information that is output as a footer on a paper printout.
This option item is not used.
2-5
Institution information 3 (Use paper print.)
40 bytes max.
Medical institution information that is output as a footer on a paper printout.
This option item is not used.
2-6
Institution information 4 (Use paper print.)
40 bytes max.
Medical institution information that is output as a footer on a paper printout.
This option item is not used.
2-7
Institution logo mark (Use paper print.)
255 bytes max.
A path to a hospital mark (JPEG, etc.) that is output onto a paper printout.
This option item is not used.
2-8
System name for which search conditions are displayed on the study list
( PC)
Simplified setup wizard
: Default setting, *: Note
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-27
MU-28 ● Setting for entering patient name Number
Setup item name
Option
Description
Remarks
3-1
Whether an input column for Specifies whether or not to display a Kanji patient name. ❍ Yes : Displays a Kanji patient name. kanji patient name is displayed No : Does not display a Kanji patient name. or not.
Simplified setup wizard
3-2
Character string length of patient ID (up to 64 characters)
1 to 64 ( 10)
Do not change the patient ID character string length after an operation. Since the number of input characters is limited, you may not able to conduct a search by patient ID.
3-3
Padding method of patient ID
Specifies the patient ID padding method. 0 : No Padding ❍ 1 : Pad with zero to the head (0001234567)
3-4
Default patient ID value to be given when the actual patient ID is unavailable in the data received via DICOM communication from the ultrasound device.
(max 10 characters)
Specifies the patient ID character string length.
: Default setting, *: Note
● Setting is also possible with the user utility. Number
Setup item name
Option
Description
Remarks (Not used.)
4-1
Whether to use guidance function on the exposure screen.
4-2
Whether to perform automatic Yes : Perform automatic output. output of the studies re❍ No : Does not perform automatic output. verified (previously-verified studies which were verified once again after necessary modifications have been applied).
4-3
Display unit of size measurement
0 : m ❍ 1 : cm ❍ 2 : inch ❍ 3 : feet
Unit used for display by the system : Size
4-4
Display unit of weight measurement
0 : kg ❍ 1 : g ❍ 2 : stone ❍ 3 : pound
Unit used for display by the system : Weight
Yes : Enable ❍ No : Disable
(Not used.)
: Default setting, *: Note
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-28
MU-29 ● Setting for image collection Number
Setup item name
Option
Description
5-1
IP size selection (inch/metric)
0 : Inch ❍ 1 : Metric
Specifies the IP size code (specifies whether the inch or metric sizes are used to represent the 14"×14"/35cm×35cm size and 14"×17"/35×43cm size).
5-2
System ID (A-Z)
A to Z ( A)
System ID (A to Z). (The system ID is a machine-specific ID and used, for instance, for study number automatic issuance.)
5-3
Set number: Minimum value
1
Set number minimum value. (This value must be smaller than the set number maximum value.)
5-4
Set number: Maximum value
1 to ZZ ( 9Z)
Set number maximum value. (This value must be greater than the set number minimum value.)
5-5
Whether Pantomography ❍ Yes : Performs a pantomography process. processing is executed or not. No : Does not perform a pantomography process.
Specifies whether or not to perform a pantomography process (perform a trimming process when the pantomography menu is selected and the image size is 12×10inch size).
5-6
Whether GS conversion for six Ts/1824 images is performed or not.
Specifies whether or not to provide GS conversion for 18×24cm/8×10inch standard-density images.
Yes : Provides conversion. ❍ No : Does not provide conversion.
Remarks
: Default setting, *: Note
● Setting for image browsing Number
Setup item name
Option
Description
6-1
Display unit of measurement result
0 : cm ❍ 1 : Inch
Specifies the unit in which the length and the heart-to-ribcage ratio are displayed.
6-2
Number of rows displaying additional image information
1 to 10 ( 3)
Position selection window grid size (number of columns).
6-3
Number of lines displaying additional image information
1 to 15 ( 7)
Position selection window grid size (number of rows).
Remarks
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-29
MU-30 ● Setting for general-purpose file output Number
Setup item name
Option
Description
Remarks
7-1
Path name at general-purpose (255 characters max.) file output destination at the time of automatic output.
General-purpose file output destination.
This option item is not used.
7-2
General-purpose file format at 0 : JPEG Lossy the time of automatic output. ❍ 1 : Bitmap
General-purpose file format for automatic output
This option item is not used.
7-3
General-purpose file reduction 1 to 100 ( 100) rate % at the time of automatic output.
General-purpose file image reduction ratio (%) for automatic output (valid This option item is not used. for JPEG and BMP files).
7-4
General-purpose file image General-purpose file image quality (compression ratio) for automatic ❍ 0 : Super High : Superhigh image quality quality at the time of automatic (low-energy compression). output (valid for JPEG files). output (compressibility) 1 : High Quality : High image quality (standard-energy compression). ❍ 2 : Standard : Standard image quality (highenergy compression).
7-5
Name generation rule for general-purpose file at the time of output.
General-purpose file name generation rules. This option item is not used. ❍ 0 : ImageNumber “Img” + “serial number.”txt * If the host name length exceeds 10 characters when Type1 or Type2 is 1 : Type1 “Host name” + “date” + “serial number.”txt selected, the application performs an automatic edit to reduce the Host name: 10 characters max.; date: 2 length to 10 characters. characters at all times; serial number: 4 characters at all times ❍ 2 : Type2 “Patient ID” + “_” + “study date (year/ month/day) + “_” + “ANK anatomical region” + “_” + “serial number” + “_” + “host name.”txt Patient ID: 16 characters max.; study date: 6 characters at all times; host name: 10 characters max.
7-6
Name generation rule for general-purpose file at the time of output (For studies other than CR).
❍ 0 : ImageNumber 1 : Type1 ❍ 2 : Type2
7-7
Default character strings to be - (max 64 characters) output to patient information text file.
This option item is not used.
Name generation rules to be applied to a situation where an endoscope study image is automatically output as a general-purpose file.
This option item is not used.
Default character strings to be output to a patient information text file.
This option item is not used.
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-30
MU-31 ● Linkage with the receipt computer Number
Setup item name
Option
Description
Remarks
8-1
Whether support is provided or not to linkage with the receipt computer.
❍ Yes : Provides support. No : Does not provide support.
Port number for connecting to 1 to 65535 ( 9031) receipt computer
This option item is not used.
8-6
Cable format requesting patient information to receipt computer
❍ 0 : A01 1 : A51
This option item is not used.
8-7
Inquiry time-out value second
1 to 20 ( 15)
This option item is not used.
8-8
Preferential destination for patient information search
❍ 0 : Local DB 1 : ReceiptComp.
This option item is not used.
8-9
Shared folder for linkage with the receipt computer
MAX255
This option item is not used.
8-10
Shared folder monitoring interval [sec] on linkage with the receipt computer
1 to 300 ( 5)
This option item is not used.
8-11
Port number for receiving cable messages from the receipt computer
1 to 65535 ( 5011)
This option item is not used.
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-31
MU-32 Number 8-12
Setup item name
Option
Description
Receipt time-out value [msec] 1 to 1000 ( 1000) of continuous cable messages from the receipt computer
Remarks This option item is not used.
: Default setting, *: Note
● Setting for image link Number
Setup item name
Option
Description
Remarks
9-1
Whether support is provided ❍ 0 : None or not to Image Link as well as 1 : SANYO its linkage device model. ❍ 2 : STANDARD
This option item is not used.
9-2
Pipe name when named pipe is communicated
This option item is not used.
9-3
Whether patient ID is acquired ❍ Yes : Automatically acquires the patient ID. from the care card No : Does not automatically acquire the automatically when beginning patient ID. to inspect it newly or not?
This option item is not used.
9-4
Required cable response time-out value second when the pipe is connected
1 to 20 ( 5)
This option item is not used.
9-5
User name when the pipe is connected
fujicr
This option item is not used.
9-6
Password when the pipe is connected
system
This option item is not used.
9-7
Interval [msec] for monitoring 100 to 60000 ( 500) the common folder that checks requests for image display and study reservation/start, using the networking function. *Networking system = STANDARD
McssPIDSycService
This option item is not used.
: Default setting, *: Note
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-32
MU-33 ● Image incidental information Number 11-1
Setup item name Activation of the image processing modification flag
Option ❍ Yes : Validates the flag. No : Invalidates the flag.
Description
Remarks
Specifies whether the image process change flag should be validated or invalidated for an image processing parameter change.
: Default setting, *: Note
● Print format Number
Setup item name
Option
Description
12-1
Type specification of film margin (blank part)
Specifies the paintout type of a margin (background) outside the image 0 : Margin depend on image ID display area. Conforms to the first frame if a format other than single is (default:Transparent) Either transparent or black depending used. on the image information. Transparent if nothing is specified by the image information. ❍ 1 : Margin depend on image ID (default:Black) Either transparent or black depending on the image information. Black if nothing is specified by the image information. ❍ 2 : Transparent Margin (Fix) Transparent at all times. ❍ 3 : Black Margin (Fix) Black at all times.
12-2
Trimming volume [mm] (excluding Mammo)
0 to 25 ( 0)
Whether or not there is a frame on the image when 18×24 Single is formatted 14×17, 14×14,18×43 / 8×10.
Specifies the trimming amount [mm] (except for mammography).
Trimming amount
* Be sure to enter one or two 1-byte characters from the keyboard. Specifies whether bordered or borderless prints should be generated when 35×43cm/14×17inch, 35×35cm/14×14inch, 26×36cm, 24×30cm/ 10×12inch, or 18×24cm/8×10inch film is printed in the following patterns: ❍ 35×43cm/14×17inch Single format prints of a 35×43cm/14×17inch size image Single format prints of a 35×35cm/14×14inch size image Single format prints of an 18×43cm size image ❍ 35×35cm/14×14inch Single format prints of a 35×35cm/14×14inch size image ❍ 26×36cm Single format prints of a 10×14inch size image ❍ 24×30cm/10×12inch Single format prints of a 10×12inch size image ❍ 18×24cm/8×10inch Single format prints of an 18×24cm/8×10inch size image * If the output format is displaced, the image border is not displayed.
Description Specifies whether bordered or borderless prints should be generated when an 18×43cm size image is printed onto 35×43cm/14×17inch film in the LR or 2-on-1 format. * If the output format is displaced, the image border is not displayed.
12-5
Whether or not there is a ❍ Yes : Generates framed image prints. frame on the image when No : Generates frameless image prints. 14×17, 18×43, 8×10, 4on1 are formatted.
Specifies whether bordered or borderless prints should be generated when a 35×43cm/14×17inch, 18×43cm, or 18×24cm/8×10inch size image is printed onto 35×43cm/ 14×17inch film in the 4-on-1 format.
12-6
Whether or not there is a frame on the image when 2on1 display of L&R breast images on B4 film (equal to 18×24) is formatted.
Specifies whether bordered or borderless prints should be generated when a 18×24cm size image (100% size) is printed onto 26×36cm film in the LR or 2-on-1 format.
12-7
Whether or not there is a frame in the 8×10 mammo Single image formatted onto B4 film.
Specifies whether framed or frameless prints should be generated when (Not used.) a 18×24cm/24×30cm size mammographic image is printed onto 26×36cm film in the single format or when a 18×24cm size mammographic image is printed onto 18×24cm/8×10inch film in the single format.
12-8
Whether or not there is a frame in the output image equal to 1824.
Specifies whether framed or frameless prints should be generated when a 18×24cm size (100%-size) image is printed.
12-9
Setting of menu code in which [Dialog setup] (?3??) scale is not displayed For the setup procedure, see under (effective when setting is such “■ Details of [dialog setup].” that image frame is added).
12-10
Specification of age display form
Remarks
0: Age : Japanese version
Non-Japanese version ❍ 1: Date of birth Japanese version Non-Japanese version
Specifies a menu code that does not print out the scale. * This setting is valid for images that are to be framed. * This setup can also be performed variously for each MPM code. Up to eight MPM codes can be specified (a wildcard character may be used to specify the MPM codes).
Displays the age. Specifies the age display format. Example) 25 years old, 1 year and 8 * For DATE display, “Date display format” selected from “Localize months old, 1 month setting” is used. and 10 days old, 13 days old. Example) 25Y, 1Y8M, 1M10D, 13D. Displays the birth date. Generates an output in “born on DATE” form. Generates an output in “DATE B” form.
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-34
MU-35 Number
Setup item name
Option
Description
12-11
Specification of right and left reversing mark display form
❍ 0 : None Prints out no right-and-left reversal mark. ❍ 1 : R-reverse Not reversed: Displays no right-and-left reversal mark. Reversed: Displays “Я.” 2 : AP or PA Not reversed: Displays “AP.” Reversed: Displays “PA.”
Specifies whether or not to output the right-and-left image reversal mark.
12-12
Whether or not film character ❍ 0 : None area display is available when Does not generate a film output. 18×24-Single is formatted ❍ 1 : Only area 1 half-size Film Displays film annotation character area 14×17-Single/4on1, 1 only. 18×43-LR/2on1/4on1, 8×10❍ 2 : Only area 2 4on1 format, and 8×10 film Displays film annotation character area size. 2 only. 3 : Both Displays both film annotation character areas.
Specifies whether or not display the film annotation character areas when 35×43cm/14×17inch, 35×35cm/14×14inch, 26×36cm, or 18×24cm/ 8×10inch film is printed in the following patterns: ❍ 35×43cm/14×17inch Single or 4-on-1 format prints of a 35×43cm/14×17inch size image LR, 2-on-1, or 4-on-1 format prints of a 18×43cm size image 4-on-1 format prints of a 18×43cm/8×10inch size image ❍ 35×35cm/14×14inch Single format prints of a 35×35cm/14×14inch size image ❍ 26×36cm Single format prints of a 10×14inch size image ❍ 18×24cm/8×10inch Single format prints of a 18×24cm/8×10inch size image
Remarks
See under “■ Film annotation character areas 1 and 2.” 12-13
Film character area size when 0 : Standard a film equal to 14×17 size is ❍ 1 : Large output.
Specifies the film annotation character area size for a situation where 35×43cm/14×17inch, 35×35cm/14×14inch, 26×36cm, or 18×24cm/ 8×10inch film is printed in the following patterns: ❍ 35×43cm/14×17inch Single format prints of a 35×43cm/14×17inch size image ❍ 35×35cm/14×14inch Single format prints of a 35×35cm/14×14inch size image ❍ 26×36cm Single format prints of a 10×14inch size image ❍ 18×24cm/8×10inch Single format prints of a 18×24cm/8×10inch size image
12-14
Film character area position and rotation setting when half-size Film 14×17-Single/ 4on1 is formatted (default rule)
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where a 35×43cm/ 14×17inch size image is printed onto 35×43cm/14×17inch film in the single or 4-on-1 format.
[Dialog setup] ( 0010) For the setup procedure, see under “■ Details of [dialog setup].”
* The settings are valid for all exposure menus. When performing setup for each MPM code, use setup item No.12-26. See under “■ Film annotation character areas 1 and 2.”
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-35
MU-36 Number 12-15
Setup item name
Option
Film character area position [Dialog setup] ( 1131) and rotation setting when For the setup procedure, see under Single/4on1 half-size Film “■ Details of [dialog setup].” 17×14 (horizontal half-size)- is formatted (default rule)
Description
Remarks
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where a 43×35cm/ 17×14inch size image is printed onto 43×35cm/17×14inch film in the single or 4-on-1 format. * The settings are valid for all exposure menus. When performing setup for each MPM code, use setup item No.12-27. See under “■ Film annotation character areas 1 and 2.”
12-16
Film character area position and rotation setting when half-size Film 18×43-LR/2on1/4on1 is formatted (default rule)
[Dialog setup] ( 0010) For the setup procedure, see under “■ Details of [dialog setup].”
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where an 18×43cm size image is printed onto 35×43cm/14×17inch film in the LR, 2-on-1, or 4-on-1 format. * The settings are valid for all exposure menus. When performing setup for each MPM code, use setup item No. 12-28. See under “■ Film annotation character areas 1 and 2.”
12-17
Film character area position and rotation setting when 18×24-Single is formatted half-size Film 8×10-4on1 format and 8×10 size film (default rule)
[Dialog setup] ( 0010) For the setup procedure, see under “■ Details of [dialog setup].”
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where an 18×24cm/8×10inch size image is printed onto 35×43cm/14×17inch film in the 4-on-1 format or an 18×24cm/ 8×10inch size image is printed onto 18×24cm/8×10inch film in the single format. * The settings are valid for all exposure menus. When performing setup for each MPM code, use setup item No.12-29. See under “■ Film annotation character areas 1 and 2.”
12-18
12-19
12-20
12-21
Film character area position and rotation setting when 8×10 and 18×24-Single (90 degree-rotation available) are formatted. (default rule)
[Dialog setup] ( 1131) For the setup procedure, see under “■ Details of [dialog setup].”
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where a 90°-rotated 8×10inch/18×24cm image is printed onto 18×24cm/8×10inch film in the single format. See under “■ Film annotation character areas 1 and 2.”
[Dialog setup] ( 0010) Film character area position and rotation when Osumi Film For the setup procedure, see under 14×14- Single is formatted “■ Details of [dialog setup].” (default rule)
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where a 35×35cm/14×14inch size image is printed onto 35×35cm/14×14inch film in the single format.
Film character area position and rotation when Single is formatted onto B4 film (equal to 10×14)
[Dialog setup] ( 0010)
Specifies the position and rotation of film annotation character areas (default) for a situation where a 10×14inch size image (100% size) is printed onto 26×36cm film in the single format.
Film character area position and rotation when Single is formatted onto B4 film (equal to 14×10 horizontal B4) (default rule)
[Dialog setup] ( 1131)
For the setup procedure, see under “■ Details of [dialog setup].”
For the setup procedure, see under “■ Details of [dialog setup].”
* The settings are valid for all exposure menus.
Specifies the position and rotation of film annotation character areas (default) for a situation where a 14×10inch size (26×36cm landscape) image (100% size) is printed onto 26×36cm film in the single format.
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-36
MU-37 Number 12-22
12-23
12-24
12-25
12-26
Setup item name
Option
Film character area position and rotation when LR on B4 film (equal to 18×24) is formatted (default rule)
[Dialog setup] ( 0010)
Film character area position and rotation when 2on1 display on B4 film (equal to 18×24) is formatted (default rule)
0010 [Dialog setup] ( 0010)
Film character area position and rotation when 10×12 size film and 2430-Single are formatted (default rule)
[Dialog setup] ( 0010)
Film character area position and rotation when 10×12 size film, 2430-Single (90 degreerotation available) are formatted. (default rule)
[Dialog setup] ( 1131)
Film character area position and rotation setting when half-size Film 14×17-Single/4on1 is formatted (user definition 1)
[Dialog setup] ( None)
For the setup procedure, see under “■ Details of [dialog setup].”
For the setup procedure, see under “■ Details of [dialog setup].”
For the setup procedure, see under “■ Details of [dialog setup].”
For the setup procedure, see under “■ Details of [dialog setup].”
For the setup procedure, see under “■ Details of [dialog setup].”
Description
Remarks
Specifies the position and rotation of film annotation character areas (default) for a situation where an 18×24cm size image (100% size) is printed onto 26×36cm film in the LR format. Specifies the position and rotation of film annotation character areas (default) for a situation where an 18×24cm size image (100% size) is printed onto 26×36cm film in the 2-on-1 format.
Specifies the position and rotation of film annotation character areas (default) for a situation where a 10×12inch/24×30cm size image is printed onto 24×30cm/10×12inch film in the single format. Specifies the position and rotation of film annotation character areas (default) for a situation where a 10×12inch/24×30cm size image is printed onto 24×30cm/10×12inch film in the single format (90° rotated).
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where a 35×43cm/14×17inch size image is printed onto 35×43cm/14×17inch film in the single or 4-on-1 format. * Perform setup for each MPM code (up to 8 pieces, wildcard characters unavailable). * The above settings take precedence over the settings defined under setup item No.12-14. See under “■ Film annotation character areas 1 and 2.”
12-27
[Dialog setup] ( None) Film character area position and rotation setting when For the setup procedure, see under Single/4on1 half-size Film “■ Details of [dialog setup].” 17×14 (horizontal half-size)- is formatted (user definition 2)
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where a 43×35cm/ 17×14inch size image (14×17inch landscape) is printed onto 35×43cm/14×17inch film in the single or 4-on-1 format. * Perform setup for each MPM code (up to 8 pieces, wildcard characters unavailable). * The above settings take precedence over the settings defined under setup item No.12-15. See under “■ Film annotation character areas 1 and 2.”
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-37
MU-38 Number 12-28
Setup item name Film character area position and rotation setting when half-size Film 18×43-LR/2on1/4on1 is formatted (user definition 3)
Option [Dialog setup] ( None) For the setup procedure, see under “■ Details of [dialog setup].”
Description
Remarks
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where an 18×43cm size image is printed onto 35×43cm/14×17inch film in the LR, 2-on-1, or 4-on-1 format. * Perform setup for each MPM code (up to 8 pieces, wildcard characters unavailable). * The above settings take precedence over the settings defined under setup item No.12-16. See under “■ Film annotation character areas 1 and 2.”
12-29
Film character area position and rotation setting when 18×24- Single is formatted half-size Film 8×10-4on1 format and 8×10 film size format (user definition 4)
[Dialog setup] ( None) For the setup procedure, see under “■ Details of [dialog setup].”
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where an 18×24cm/8×10inch size image is printed onto 35×43cm/14×17inch film in the 4-on-1 format or an 18×24cm/ 8×10inch size image is printed onto 18×24cm/8×10inch film in the single format. * Perform setup for each MPM code (up to 8 pieces, wildcard characters unavailable). * The above settings take precedence over the settings defined under setup item No.12-17. See under “■ Film annotation character areas 1 and 2.”
Position and rotation setting in [Dialog setup] ( None) film character area when For the setup procedure, see under image and film character area “■ Details of [dialog setup].” come in succession (user definition 5)
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where the image overlaps with a film annotation character area.
Position and rotation setting in [Dialog setup] ( None) film character area when For the setup procedure, see under image and film character area “■ Details of [dialog setup].” come in succession (user definition 6)
Specifies the position and rotation of film annotation character areas 1 and 2 for a situation where the image overlaps with a film annotation character area.
12-32
Image display position specification when 43×43 Single is formatted half-size Film 15×30 and 35×35 (part display)
❍ Yes : Moves to the film top. No : Does not move.
Specifies the image output position for a situation where a 15×30cm, 35×35cm/14×14inch, or 43×43cm/17×17inch size image is printed onto 35×43cm/14×17inch film in the single format.
12-33
Setting for validity/invalidity of reduced output onto an 8×10film
❍ Yes : Reduces the image to 18×24cm/8×10 inch film size. No : Generates a 100%-size image.
Specifies whether a 35×43cm/14×17inch, 35×35cm/14×14inch, or 24×30cm/10×12inch size image in the single format should be reduced and output to 18×24cm/8×10inch film.
12-30
12-31
See under “■ Film annotation character areas 1 and 2.”
See under “■ Film annotation character areas 1 and 2.”
See under “■ Output film determination sequence” 12-34
Reduction ratio when 2 on 1 display of L&R breast images on B4 film (equal to 18×24) is printed out.
0 : 86% ❍ 1 : 100%
Specifies the print reduction ratio for a situation where an 18×24cm size image is printed onto 26×36cm film in the LR or 2-on-1 format.
Setup item name Setting for Whether or not an expansion print is executed when an image with the standard density format print is output.
Option ❍ Yes : Generates a magnified print. No : Does not generate a magnified print.
Description
Remarks
When 35×43cm/14×17inch film is loaded, the 35×43cm or 35×35cm standard-density 1-image format is magnified and printed onto the 35×43cm/14×17inch film. When 35×35cm/14×14inch film is loaded, the 35×35cm standard-density 1-image format is magnified and printed onto the 35×35cm/14×14inch film.
: Default setting, *: Note
● Film character setting Number 13-1
Setup item name
Option
Description
Whether or not EDR mode is displayed.
Yes : Generates an output. ❍ No : Does not generate an output.
Specifies whether or not to output EDR mode settings to the film.
13-2
Whether or not image processing conditions are displayed.
Yes : Generates an output. ❍ No : Does not generate an output.
Specifies whether or not to output image processing conditions to the film.
13-3
Whether or not L value, S Yes : Generates an output. value, CS, and SS information ❍ No : Does not generate an output. are displayed.
Specifies whether or not to output the L value, S value, and CS/SS information to the film.
13-4
Whether or not exposure time is displayed.
Yes : Generates an output. ❍ No : Does not generate an output.
Specifies whether or not to output the exposure time to the film.
Whether or not routine and class processing information are displayed.
Yes : Generates an output. ❍ No : Does not generate an output.
Specifies whether or not to output the routine/pair information to the film.
13-6
Whether or not menu names are displayed.
Yes : Generates an output. ❍ No : Does not generate an output.
Specifies whether or not to output an exposure menu name to the film.
13-7
Whether or not compression code is displayed.
❍ Yes : Generates an output. No : Does not generate an output.
Specifies whether or not to output the image compression code information to the film.
13-5
Remarks
* The letter output to the film is A for the AUTO mode, S for the SEMI mode, F for the FIX mode, and S for the SEMI-X mode.
* The Japanese version outputs the title “Exposure date” to the left of the exposure time. Non-Japanese versions output “EXP:.”
* Film output example: RT-01, TS101
* The Japanese version outputs the title “Compression ratio” to the left of the image compression code information. Non-Japanese versions output “CC:.” 13-8
Whether or not barcode is displayed.
Yes : Displays a barcode. ❍ No : Does not display a barcode.
Specifies whether or not to output a barcode number to the film.
Barcode is not supported.
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-39
MU-40 Number 13-9
Setup item name
Option
Description
Setting for the maximum value 0 to 64 ( 20) of en-size character numbers for the patient names to be film-output.
Specifies the maximum number of 1-byte patient name characters to be printed out.
Setting for the maximum value 0 to 64 ( 10) of em-size character numbers for the patient names to be film-output.
Specifies the maximum number of Kanji patient name characters to be printed out.
13-11
Setting for right/left justification 0 : Left (left alignment) of patient names. ❍ 1 : Right (right alignment)
Specifies whether the patient name should be right-aligned or leftaligned.
13-12
Setting for the maximum value 0 to 64 ( 20) of en-size character numbers for the exposure menu names to be film-output.
Specifies the maximum number of 1-byte exposure menu name characters to be printed out.
Setting for the maximum value 0 to 64 ( 16) of em-size character numbers for the exposure menu names to be film-output.
Specifies the maximum number of Kanji exposure menu name characters to be printed out.
13-14
Setting for right/left justification 0 : Left (left alignment) of the exposure menu names. ❍ 1 : Right (right alignment)
Specifies whether the exposure menu name should be right-aligned or left-aligned.
13-15
Activation of automatic generation function for film annotation character format.
Specifies whether the automatic editing function for the format definition file should be enabled or disabled.
13-10
13-13
Yes ❍ No
Remarks
* If the employed setting is greater than the default value (20), the other information may not fit in a film annotation character area.
* If the employed setting is greater than the default value (10), the other information may not fit in a film annotation character area.
* If the employed setting is greater than the default value (20), the other information may not fit in a film annotation character area.
* If the employed setting is greater than the default value (16), the other information may not fit in a film annotation character area.
: Default setting, *: Note
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
MU-40
MU-41 ● Setting for output function Number
Setup item name
Option
Description
Remarks
14-1
Whether or not retry has been Yes : Performs a retry. executed after an abnormal ❍ No : Performs no retry. output was made.
Specifies whether or not to perform a retry after the occurrence of an output abnormality.
14-2
Status acquisition timing of DICOM printer
❍ 0 : At print 1 : Polling
At print : Acquires the status at the time of printing. Polling : Acquires the status periodically.
14-3
Arbitrary setting of DVD burning for storage
Yes ❍ No
Specifies whether or not to be essential to DVD burning for the image storage. Yes : Essential No : Not essential
14-5
Whether annotation information will be embedded in the images for film output.
Yes ❍ No
Specifies whether or not to embed annotation information in the images Setting is also possible with the user for film output. utility. Yes : Annotation information will be embedded in the images for film output. No : Annotation information will not be embedded in the images for film output.
14-6
Whether annotation information will be embedded in the images for generalpurpose file output.
Yes ❍ No
Specifies whether or not to embed annotation information in the images for general-purpose file output. Yes : Annotation information will be embedded in the images for general-purpose file output. No : An annotation information will not be embedded in the images for general-purpose file output.
Setting is also possible with the user utility.
: Default setting, *: Note
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-41
MU-42 ● Operation (low frequency) setting Number
Setup item name
Option
Description
15-1
The maximum registration number of patient information
10000 to 200000 ( 200000).
Specifies the maximum number of patients to be registered (patient information FIFO maximum count).
15-2
The maximum registration number of study information
10000 to 60000 ( 60000).
Specifies the maximum number of studies (study information FIFO maximum count).
15-3
Status acquisition timing of DICOM printer
1 to 16 ( 6)
15-4
Timeout occurring prior to study termination
5 to 600 ( 5)
15-5
Maximum number of markers
0 to 128 ( 50)
15-6
Primary threshold warning system capacity
36 to 65 ( 50)
Primary threshold warning system capacity (the indicator changes from blue to yellow). (Unit : GB)
15-7
Secondary threshold warning system capacity
16 to 35 ( 30)
Secondary threshold warning system capacity (the indicator changes from yellow to red). (Unit : GB)
15-8
Warning threshold on system capacity
10 to 15 ( 10)
Warning threshold on system capacity (an error message is displayed). (Unit : GB)
15-9
Primary threshold warning database capacity
151 to 300 ( 200)
Primary threshold warning database capacity (an error is displayed in the indicator at the time of startup). (Unit : MB)
15-10
Secondary threshold warning database capacity
51 to 150 ( 100)
Secondary threshold warning database capacity (an error is displayed in the indicator at the time of startup). (Unit : MB)
15-11
Warning threshold on database capacity
10 to 50 ( 30)
Warning threshold on database capacity (an error message is displayed). (Unit : MB)
15-12
Minimum remaining capacity of local HDD
1024 to 65535 ( 5120)
Threshold for automatic transfer or deletion of the study data. (Unit : MB)
Remarks
: Default setting, *: Note
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-42
MU-43 ● Setting for analysis Number
Setup item name
Option
Description
19-1
Log acquisition of DICOMPrintSCU communication
❍ 0 : No 1 : Yes ❍ 2 : Yes (details).
DICOM print log acquisition.
19-2
Log acquisition of FRUPMain control communication
❍ 0 : No 1 : Yes
Log acquisition.
19-3
Log acquisition of FRUP connection watch
❍ 0 : No 1 : Yes
Log acquisition.
19-4
Log acquisition of FRUP image connection
❍ 0 : No 1 : Yes
Log acquisition.
19-5
Trace log acquisition when image is output
❍ 0 : No 1 : Yes
Output process trace log acquisition.
19-6
Log acquisition of DICOM verification SCU
❍ 0 : No 1 : Yes ❍ 2 : Yes (details).
DICOM verification log acquisition.
19-7
Log acquisition of DICOM storage SCU
❍ 0 : No 1 : Yes ❍ 2 : Yes (details).
DICOM storage SCU log acquisition.
19-8
Collect image data for maintenance logs (For the number of studies)
0 to 60000 ( 2000).
The number of studies to be collected when deleting personal information (all studies are collected when no personal data is deleted.)
19-9
Arbitrary settings for acquisition of DICOM storage SCP log
❍ 0 : No 1 : Yes ❍ 2 : Yes (details).
DICIOM storage SCP log acquisition
19-10
Retrieve the log in MWM function
❍ 0 : No 1 : Yes ❍ 2 : Yes (details).
DICOM MWM log acquisition.
Remarks
(Not used.)
: Default setting, *: Note
● Settings for endoscopic image import Number
Setup item name
Option
Description
Remarks
20-1
Support availability on endoscopic image import and the receiving system
❍ 0 : None ❍ 1 : M-Receive 2 : FTP
Endoscope image acquisition support and reception method.
JPEG Lossless [1.2.840.10008.1.2.4.70]: This option can be chosen for CR images, but not for CT images. Explicit VR Little Endian (LEE) [1.2.840.10008.1.2.1]: This option can be chosen for both CR and CT images.
: Default setting, *: Note
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-44
MU-45 ● Free Layout Setting Number 24-1
Setup item name Presence/Absence of Patient ID display
Option
Description
Remarks
Presence/Absence of Patient ID display
Yes ❍ No
: Default setting, *: Note
● Setting for DICOM-MWM Number
Setup item name
Option
25-1
Whether support is provided or not to linkage with the MWM Server.
25-2
Preferential destination for ❍ 0 : Local DB patient information search, in 1 : MWM the linkage with MWM Server.
❍ Yes No
Description
Remarks
Whether support is provided or not to linkage with the MWM Server.
Priority destination for patient information search
: Default setting, *: Note
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-45
MU-46 Film annotation character areas 1 and 2 This section describes the display, position, and rotation of film annotation character areas 1 and 2, which can be defined by setup items No.12-12 and 12-14 to 12-31. If an image is printed on a 14"×17" film as set by the default, the film annotation characters are displayed at both the upper right and left of the image. Areas where those characters are displayed are the film annotation character areas. The upper-left area is area “1” and that at the upper right is area “2.”
Positional and rotational movement of the film annotation character areas Use setup items No.12-14 to 12-31 “Film character area position and rotation...” to specify the position and rotation of the film annotation character areas. The general idea about the film annotation character area position and rotation is indicated below. Position 0
Position 1
Not rotated.
Film annotation character area 1
90º rotated (counterclockwise). One-frame film area
Film annotation character area 2
One-frame film area
Output print image (*Default setting) Position 2
Position 3
Definition of positional movement
Definition of rotational movement
F0000009.EPS
F0000010.EPS
Whether to display the film annotation character areas Use setup item No.12-12 “Whether or not film character area display is available when 18×24-Single is formatted half-size Film 14×17-Single/4on1, 18×43-LR/2on1/4on1, 8×10-4on1 format, and 8×10 film size.” to specify whether or not to display film annotation character areas 1 and 2. 0: None Does not generate a film output. 1: Only area 1 Displays film annotation character area 1 only. 2: Only area 2 Displays film annotation character area 2 only. 3: Both (default) Displays both film annotation character areas.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-46
MU-47 Output film determination sequence When “Yes” is chosen for setup item No.12-33 “Setting for validity/invalidity of reduced output onto an 8×10film”, the output film size is determined in the following sequence: Film combination 14"×17"
26×36cm
8"×10"
8"×10"
Determination sequence
1. When the Single format is used, the 10"×12" and 24×30cm images will be printed onto 10"×12" film. 2. When a Single format other than indicated above is used, the image will be printed onto 8"×10" film. 3. In situations other than above, there are no applicable films.
8"×10"
14"×14"
1. When 35×35 (cm), high pixel density, Single format is used, the image will be printed onto 14"×14" film at a magnification of 100%. 2. When a Single format other than indicated above is used, the image will be printed onto 8"×10" film. 3. In situations other than above, there is no applicable film.
020-221-02E 01.08.2010 FM5563
Double-clicking the setup value in the No. 12-9 column will open the following dialog.
I.
1. When the Single format is used, the image will be printed onto 8"×10" film. 2. In situations other than above, the image will be printed onto 26×36cm film.
8"×10"
—
● Procedure for “12-9 Setting of menu code in which scale is not displayed (effective when setting is such that image frame is added).”
1. When the 35×43 (cm) or 35×35 (cm), high pixel density, Single format is used, the image will be printed onto 14"×17" film at a magnification of 100%. 2. When a Single format other than indicated above is used, the image will be printed onto 8"×10" film. 3. 4on1 and 3on1 format images are printed on 14"×17" films. 4. In situations other than above, images are printed on 14"×17" films in the 26×36cm film output format.
26×36cm
8"×10"
■ Details of [dialog setup]
1. When the Single format is used, the image will be printed onto 8"×10" film. 2. In situations other than above, there is no applicable film.
II.
III.
IV. MU000048.EPS
I.
Choose “Displaying a scale on all images” when providing a scale for all films. Choose “Displaying no scale on all images” when providing no scale for all films. Choose “Selecting an undisplayed MPM code” when ensuring that images having a particular MPM code are not provided with a scale. II. Enter the image’s MPM code on the keyboard or select it from the pull-down menu. Be sure to set up if “Selecting an undisplayed MPM code” is selected in step I. above. Specifying using a wild card is also possible, such as “?0??” (“?” is an arbitrary one-digit alphanumeric from 0 to F.) III. Click to cancel the setup data to be saved. IV. Click if data set up in I. and II. above are correct. The system returns to the previous window and any of the following will be displayed in the Value column. : Does not provide a scale. ???? : Provides a scale for all images. (Blank) Four-digit number : MPM code of an image not added with reading scale.
CR-IR 391CL Service Manual
MU-47
MU-48 ● Setup procedure for “12-14 to 12-25 Film character area position and rotation...” Double-clicking the setup value in the column of Nos. 12-14 to 25 will open the following dialog.
VI. Click if data set up in I. to IV. above are correct. The system returns to the previous window and a four-digit number will be displayed in the “Value” column. The meaning of such four-digit number is as follows.
0031 90o image rotation of film annotation character area 2 (0: Not rotated, 1: Rotated)
I.
Position of film annotation character area 2 (0: Upper left, 1: Upper right, 2: Lower left, 3: Lower right) 90o image rotation of film annotation character area 1 (0: Not rotated,1: Rotated)
II.
Position of film annotation character a rea 1 (0: Upper left, 1: Upper right, 2: Lower left, 3: Lower right) F0000014.EPS
III.
IV.
V.
VI.
MU000049.EPS
I. Specifies the film annotation character area 1 display position. II. Specifies the 90° image rotation (counterclockwise) of film annotation character area 1. III. Specifies the film annotation character area 2 display position. IV. Specifies the 90° image rotation (counterclockwise) of film annotation character area 2. For details of the film annotation character area, see “■ Film annotation character areas 1 and 2.” V. Click to cancel the setup data to be saved.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-48
MU-49 ● Setup procedure for “12-26 to 12-31 Film character area position and rotation (user definition X)” Double-clicking the setup value in the column of Nos. 12-26 to 31 will open the following dialog. I.
VII. Click to apply the settings entered in steps I. to V. The system then returns to the previous window and character strings appear in the “Setup value” fields to represent the settings. Definition of image position or rotation
MPM code (a maximum of 8 codes can be displayed.)
0031 : 0000 0004 0009 000C 000E 000B 0002 0008 90o image rotation of film annotation character area 2 (0: Not rotated, 1: Rotated) Position of film annotation character area 2 (0: Upper left, 1: Upper right, 2: Lower left, 3: Lower right) 90o image rotation of film annotation character area 1 (0: Not rotated,1: Rotated) Position of film annotation character a rea 1 (0: Upper left, 1: Upper right, 2: Lower left, 3: Lower right)
II.
III.
F0000015.ai
IV.
V.
VI.
I. II. III. IV. V.
VII.
MU000050.EPS
From the pull-down menu, select the MPM code for the image whose film annotation character area is to be changed. You cannot specify the MPM code from the keyboard or through the use of a wildcard character. Specify the film annotation character area 1 display position. Specify the 90° image rotation (counterclockwise) of film annotation character area 1. Specify the film annotation character area 2 display position. Specify the 90° image rotation (counterclockwise) of film annotation character area 2. For details of the film annotation character area, see “■ Film annotation character areas 1 and 2.”
VI. Click to cancel the setup data to be saved.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-49
MU-50 6.2 Connected Equipment
6.2.1 Server Equipment Settings
Perform setup for each of the devices to be connected to the CR-IR 391CL. The contents of the “Setting connection devices” window are classified under the “Server (this equipment)” and “Image Reader” categories. The “Client equipment”, “Film printer” and “DICOM Storage Device” categories do not appear in the window if the associated options are not installed.
Perform setup for the CR-IR 391CL server.
■ Settings accessible from the “Server equipment settings” window Name
Description
Setting
Equipment name
Equipment name that Input method: Text input. identifies the equipment. Acceptable input characters: 1- and 2-byte characters. Maximum number of characters: 16 characters.
Host name
Host name assigned to the equipment.
This is merely displayed. The information acquired from the OS is displayed.
IP Address
IP address assigned to the equipment.
This is merely displayed. The information acquired from the OS is displayed.
Software keyboard
Specifies whether or not to display the software keyboard in the patient/ study information input windows.
Input method: Single selection. ON: Displays the software keyboard. OFF: Does not display the software keyboard.
Monitor settings
Monitor model Monitor model name. Magnified Display (%)
Width of one pixel of the employed monitor.
MU000053.ai
See under “6.2.2 Monitor Settings.” Input method: Text input or spin button. Acceptable input characters: 1-byte numerals. Value range: 1 to 999. See under “6.2.2 Monitor Settings.”
020-221-02E 01.08.2010 FM5563
DICOM setting
DICOM device setting.
See under “6.2.3 DICOM Settings.”
Disk drive settings
Settings for the image storage disk drive.
See under “6.2.4 Disk Drive Settings.”
CR-IR 391CL Service Manual
MU-50
MU-51 5.
■ Setup procedure
1.
See under “6.2.2 Monitor Settings.”
Start the Service Utility.
6.
➔ The “Service Utility top” window opens.
2.
Click [Connected equipment].
7.
Set up the disk drive. See under “6.2.4 Disk Drive Settings.”
Click [Server (this equipment)].
8.
➔ The “Server equipment settings” window opens.
4.
Perform DICOM setup. See under “6.2.3 DICOM Settings.”
➔ The “Setting connection devices” window opens.
3.
Set up the monitor.
Click [OK]. ➔ The system returns to the “Service Utility top” window.
Perform the following setup steps:
I.
II.
MU000004.ai
I. Enter the equipment name. II. If you use the software keyboard in the patient/study information input windows, put a checkmark in the “Use” check box ( ➔ ).
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-51
MU-52 5.
6.2.2 Monitor Settings Select a monitor model and a gradation correction file (LUT file) that matches the selected monitor model.
1.
Select a registered monitor model, gradation correction file, and magnified display (%) of the reference image. ➥ REFERENCE
Clicking [Update] updates the displayed monitor model list.
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
3. 4.
Click [Server (this equipment)].
MU000005.EPS
6.
Click [OK]. ➔ The system returns to the “Server equipment settings” window.
➔ The “Server equipment settings” window opens.
NOTE
Click [Selection].
The monitor settings are automatically entered. Do not change the “Magnified display (%) of the reference image” here although it can be changed.
➤ IMPORTANT For a locally procured LCD monitor, be sure to perform the procedure below: I.
Insert an FD where the LUT file is stored into the FD drive.
7.
II. Click “Update” on the “Monitor model selection” window.
If the “Magnified display (%) of the reference image” needs to be fine tuned, click the or for adjustment purposes.
NOTE
III. Select an LUT for the added model and click [OK].
Selecting a “Monitor model” automatically enters a “Magnified display (%) of the reference image” value. Do not change the value under normal conditions. If you change the value, you have to make sure that the image displayed at a magnification of 100% is of the actual size.
➔ The “Monitor model selection” window opens.
8.
Click [OK]. ➔ The system returns to the “Service Utility top” window.
MCApp13001.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-52
MU-53 6.2.3 DICOM Settings
■ Setup procedure
This section describes the procedure for DICOM device setup. Perform local equipment setup concerning the DVD drive, DICOM Print, and DICOM Storage.
■ Settings accessible from the “Set up DICOM” window Name
Description Name identified when the DICOM protocol is used. Use “MEDIA.”
Input method: Text input. Maximum number of characters: 16 characters.
Maximum pixel density size for a stored image (II.)
Maximum pixel density size for an image stored on the management disk drive.
Input method: Single selection. ST HQ
Whether or not to specify data compression for stored images (III.)
Method for compressing the image to be stored on the management disk drive.
Input method: Single selection. Image data compressed Image data not compressed
Setting multi-byte characters (IV.)
Specifies whether any Input method: Single selection. incidental information in multi- ON: Stores the image information. byte characters should be OFF: Does not store the image stored on media. information.
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
Click [DICOM setting]. ➔ The “Set up DICOM” window opens.
Print SCU setting AE Name (V.)
Name identified when the DICOM protocol is used. Use “FCR-CSL.”
Input method: Text input. Maximum number of characters: 16 characters.
Timeout Value (VI.) Command level timeout value. Input method: Text input. Acceptable input characters: 1-byte numerals. Value range: 1 to 3600. Presentation Context (VII.)
Sets the currently used abstract syntaxes.
Input method: Multiple selections. BasicGrayscalePrint: Nonselectable. Yes at all times. Verification: Yes/No
Settings for Storage SCU AE Name (VIII.)
Name identified when the DICOM protocol is used. Use “FCR-CSL.”
Input method: Text input. Maximum number of characters: 16 characters.
Timeout Value (IX.) Command level timeout value. Input method: Text input. Acceptable input characters: 1-byte numerals. Value range: 1 to 3600.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-53
MU-54 5.
● Media storage setup I. Enter the AE name (e.g., MEDIA).
Perform the following setup steps:
NOTES I.
The acceptable input characters are 1-byte alphanumeric characters. The maximum number of character is 16.
II. III. IV.
II. Select a maximum pixel density size for the image to be stored on the management disk drive. Setting
Description
ST
Standard density.
High density.
HQ
: Default
➥ REFERENCE V. VI. VII.
Selecting “HQ” reduces the number of images that can be recorded on a DVD. For the number of images that can be stored when the ST, HQ, compressed, or uncompressed option is selected, see under “1.6 Image Storage Performance” of “Product Specifications.”
III. Select a method for compressing the image to be stored on the management disk drive. Setting Image data compressed MU060207.ai
➥ REFERENCE “Print SCU setting” and “Settings for Storage SCU” do not appear in the window if these options are not installed.
Description Compresses the image (lossless).
Image data not compressed Does not compress the image.
: Default
➥ REFERENCE Selecting “Image data not compressed” reduces the number of images that can be recorded on a DVD. For the number of images that can be stored when the ST, HQ, compressed, or uncompressed option is selected, see under “1.6 Image Storage Performance” of “Product Specifications.”
IV. When storing Kanji or other 2-byte character information, put a checkmark ( ). ➔
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-54
MU-55 ● Print SCU setting (option) Select the [Print SCU setting] tab and perform the following setup steps:
● Settings for Storage SCU (option) Select the [Settings for Storage SCU] tab and perform the following setup steps:
V. Enter the AE name (FCR-CSL).
NOTES The acceptable input characters are 1-byte alphanumeric characters. The maximum number of character is 16. VI. Specify the timeout value (300) between DICOM messages by entering text or by clicking the or . VII. Put a checkmark in the check boxes for the currently used abstract syntaxes ( ). ➔
NOTE The check box for “BasicGrayscalePrint” is checked at all times.
➥ REFERENCE
VIII.
“Verification” is a service class for verifying the connection between DICOM devices. When verifying the connection, it is necessary to check “Verification.”
IX.
For details on connection verification, see under “7.3 Connection Check.”
MU060206.ai
VIII. Enter the AE name (FCR-CSL). IX. Specify the timeout value (300) between DICOM messages by entering text or by clicking the or .
6.
Click [OK]. ➔ The system returns to the “Server equipment settings” window.
7.
Click [OK]. ➔ The system returns to the “Setting connection devices” window.
8.
Click [Back]. ➔ The system returns to the “Service Utility top” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-55
MU-56 6.2.4 Disk Drive Settings
■ Setup procedure
1.
Perform disk drive setup.
➔ The “Service Utility top” window opens.
■ Settings accessible from the “Disk drive settings” window Name
Description
Setting
2.
Drive name
Drive path
Specifies whether or not to use the disk drive for server management. * Essential
Input method: Single selection. ON at all times.
Name for disk drive identification.
Input method: Text input. Acceptable input characters: 1- and 2-byte characters. Maximum number of characters: 16 characters.
Path to the drive.
Disk format application Specifies whether or not to format an unformatted medium type when it is inserted. Selects a format type. * Select the “Dedicated application.” Dedicated format application path
File path for storing a media formatting application.
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
Input method: Specify the path from the file browse dialog box. Input method: Single selection. Not specified (no formatting) Dedicated application (UDF 1.5/UDF 2.0) OS (FAT32)
Input method: Specify the path from the file browse dialog box.
Setting a “Disk Drive for Viewing the Server” Use
Specifies whether or not to use the disk drive for viewing the server.
Input method: Single selection. ON: Uses the drive. OFF: Does not use the drive.
Drive name
Name for disk drive identification.
Input method: Text input. Acceptable input characters: 1- and 2-byte characters. Maximum number of characters: 16 characters.
Drive path
Path to the drive.
Input method: Specify the path from the file browse dialog box.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-56
MU-57 5.
I.
Perform the following setup steps:
Enter the drive name (e.g., DVD) of the management disk drive.
NOTES Both the 1- and 2-byte characters can be entered. The maximum number of characters is 16. I.
II. Specify the DVD drive path. Click [Browse] to open the “Browse for Folder” window. Specify the connected DVD drive, and then click [OK].
II. III.
III. Select “Dedicated application” as the type of DVD drive media formatting application.
IV.
Setting Not specified
Description Does not provide formatting.
Dedicated application Provides formatting with the dedicated application.
OS
Use an OS function to provide formatting.
: Default
IV. Specify the Dedicated application format path. Input “C:\Program Files\FujiFilm\Hobbit\System\FFUdfFmtToolForVista.exerD”.
NOTE Input “ D” to the end of the path (“ ” represents a space and “D” represents a DVD drive path).
MU000529.ai MU000007.ai
NOTE When specifying the “Drive path” for the management disk drive, specify only a DVD drive that is directly connected to the server. No image can be stored on a DVD drive that is shared by a network.
6.
Click [OK]. ➔ The system returns to the “Server equipment settings” window.
7.
Click [OK]. ➔ The system returns to the “Setting connection devices” window.
8.
Click [Back]. ➔ The system returns to the “Service Utility top” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-57
MU-58 6.2.5 Image Reader Settings
■ Setup procedure
1.
Perform image reader setup.
■ Settings accessible from the “Settings necessary for the Image Reader” window Name
Description
Setting
Displayed equipment name. This name is displayed as the “Equipment name” of “Image Reader” in the indicator window. The default is “Image Reader.”
Input method: Text input. Acceptable input characters: 1- and 2-byte characters. Maximum number of characters: 16 characters.
Host name
Host name assigned to the equipment. The default is “RU0.”
Input method: Text input. Acceptable input characters: 1-byte characters (A-Z and a-z), 1-byte numerals, and hyphen (-).
IP Address
IP address assigned to the equipment. The default is “172.16.1.10.”
Input method: Text input. Acceptable input characters: 1-byte numerals and period (.). The IP address consists of four elements. The value of each element ranges from 0 to 255. Use a period to delimit each element.
Equipment name
Check the box to use Patient information display
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
3.
Click [Image Reader]. ➔ The “Settings necessary for the Image Reader” window opens.
4.
Perform the following setup steps:
I. II. III. IV.
Specifies whether or not to Input method: Single selection. support the patient information ON : Displays patient information. display on the Image Reader OFF : Does not display patient operation panel. information. MU060205.ai
I.
Enter the equipment name.
II. Enter the host name that is assigned to the equipment.
NOTE Acceptable input characters are 1-byte characters (A-Z and a-z), 1-byte numerals, and hyphen (-). III. Enter the IP address that is assigned to the equipment.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-58
MU-59 IV. When displaying patient information on the Image Reader’s operation panel, put a checkmark in the check box ( ➔ ).
NOTE To have the patient information be displayed, the relevant setting must be turned ON also on the RU side. In case of 391RU, be sure to set to OFF. For details of the procedure to use, see “Appendix 4: Setting the RU-Config” in “MC: Checks, Replacement and Adjustment of Parts.”
5.
Click [OK]. ➔ The system returns to the “Setting connection devices” window.
6.
Click [Back]. ➔ The system returns to the “Service Utility top” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-59
MU-60 6.2.6 Film Printer Settings (option)
Name
When connecting the optional film printer, perform the setup procedure described below.
■ Settings accessible from the “Settings necessary for the film printer” window Name
Description
Setting
Displayed equipment name. This name is displayed as the “Equipment name” of “Printer” in the indicator window and as the “Destination” for “Output status.” Example: DRYPIX PRIMA.
Input method: Text input. Acceptable input characters: 1- and 2-byte characters. Maximum number of characters: 16 characters.
Host name
Host name assigned to the equipment. Example: fujiprinter.
Input method: Text input. Acceptable input characters: 1-byte characters (A-Z and a-z), 1-byte numerals, and hyphen (-).
IP Address
IP address assigned to the equipment. Example: 172.16.1.30.
Input method: Text input. Acceptable input characters: 1-byte numerals and period (.). The IP address consists of four elements. The value of each element ranges from 0 to 255. Use a period to delimit each element.
Equipment name
DICOM AE name
Port number
Name identified when the DICOM protocol is used. Example: DRYPIX.
Number of the port used by film printer. Example: 17238.
Input method: Text input. Acceptable input characters: (The “DICOM VR=AE” condition is complied with.) ISO 646 (1990) basic G0 set excluding the following control characters: LF, FF, CR, and ESC. Maximum number of characters: 16 characters. Input method: Text input. Acceptable input characters: 1-byte numerals.
Description
Detailed settings for film printers Supported abstract syntaxes
Pixel density of an image size that is transferred at the time of printing.
Input method: Single selection. HQ ST
Destination for film output
Information that is set as “Film Input method: Single selection. Destination (2000,0040).” Not specified MAGAZINE PROCESSOR BIN_I
Bin number identification information
This setting is valid only when “BIN_I” is selected as the film output destination. Information for bin number assignment.
Input method: Single selection. MPM code Anatomical region Not specified
Default bin number
This setting is valid only when “BIN_I” is selected as the film output destination. Bin number for outputting the film that could not be identified by the “Bin number identification information” setting.
Input method: Text input. Acceptable input characters: 1-byte numerals. Value range: 1 to 100.
Image size specification function for printers
Specifies whether “Requested Input method: Single selection. Image Size (2020,0030) is ON : Supported. supported by the film printer. OFF : Unsupported.
A printer generating 10bit image printout
Specifies whether the film Input method: Single selection. printer can handle 10-bit data. ON : Supported. OFF : Unsupported.
Film type
Employed film type.
Maximum film density Maximum density of the film. (Dmax) 020-221-02E 01.08.2010 FM5563
Setting
CR-IR 391CL Service Manual
Input method: Single selection. Not specified CLEAR FILM BLUE FILM PAPER Input method: Single selection. Dmax: 3.0 Dmax: 3.6
MU-60
MU-61 Name Dealing with an image not accommodated within the printer’s image area
How to magnify an image size
Description
Setting
Process to be performed when the image is not accommodated within the drawing area that is defined by “Requested Decimate/Crop Behavior (2020,0040).”
Input method: Single selection. DECIMATE CROP FAIL Not specified
Information to be set as “Magnification Type (2010,0060).”
Smoothening type This setting is valid only when “CUBIC” is selected as the image magnification method. Only the following settings are selectable: SMOOTH SHARP MEDIUM
Input method: Text input. Acceptable input characters: 1-byte characters (A-Z and a-z), 1-byte numerals, 1-byte space, and 1-byte underscore (_). Maximum number of characters: 16 characters.
■ Setup procedure
1.
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
3.
Click [Film printer]. ➔ The “Settings necessary for the film printer” window opens.
4.
Click [Add]. ➔ The “Changing film printers” window opens.
* The examples represent a situation where the DRYPIX PRIMA is used.
MU000054.ai
020-221-02E 01.08.2010 FM5563
5.
Enter the film printer name (e.g., DRYPIX3000) in the “Equipment name” field.
6.
Enter the film printer host name (e.g., fujiprinter) in the “Host name” field.
CR-IR 391CL Service Manual
MU-61
MU-62 7.
Enter the film printer IP address (e.g., 172.16.1.30) in the “IP Address” field.
8.
Enter the film printer AE name (e.g., DRYPIX) in the “DICOM AE name” field.
9.
Enter the film printer port number (e.g., 17238) in the “Port number” field.
11. Click [Printer model selection]. ➔ The “Selecting default settings specific to film printer model” window opens.
10. Click [Detailed settings]. ➔ The “Detailed settings for film printers” window opens. MU000602.ai
12. Select a model and then click [OK]. ➔ The system returns to the “Detailed settings for film printers” window. The settings for the selected model are set as the default ones.
13. Put a checkmark in both the “BasicGrayscalePrint” and “Verification” check boxes under “Supported abstract syntaxes” (
➔
).
➥ REFERENCE “Verification” is a service class for verifying the connection between DICOM devices. When verifying the connection, it is necessary to check “Verification.” For details on connection verification, see under “7.3 Connection Check.”
14. In the
menu, specify the film sizes
that can be printed out. Put a checkmark in a check box (
➔
).
MU000601.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-62
MU-63 15. Click the downward arrow mark (
) for “Transferable image sizes”, and then select a reception image size. Setting
III. Click [Setting details of bins]. ➔ The “Setting details of bins” window opens.
Description
SH
Reception image size maximum density (ultra-high density). Reception image size maximum density (high density).
HQ : Default
16. Click the downward arrow mark (
) for “Destination for film output”, and then select a film output destination. Setting
Description
Not specified
Complies with the printer setting.
MAGAZINE
Delivers the output to a magazine type printer.
IN000515.EPS
PROCESSOR
Delivers the output to the ejection tray on the top of the printer.
Delivers the output to the sorter bin.
BIN_I
: Default
IV. In accordance with the selection made under “Bin number identification information”, double-click the “Key” field and then enter a key. If “MPM code” is selected under “Bin number identification information”, enter an MPM code (e.g., 0200). If “Anatomical region” is selected, enter an anatomical region name (e.g., CHEST).
17. If “BIN_1” (sorter setting) is selected as the “Destination for film output”, perform the following setup steps: I.
Click the downward arrow mark ( ) for “Bin number identification information”, and then specify the bin number identification information. Setting
Description
MPM code
Identifies the output bin by MPM code.
Anatomical region
Identifies the output bin by anatomical region.
Not specified
Complies with the printer setting.
: Default
II. Click the downward arrow mark ( specify the default bin number.
) for “Default bin number” and then
➥ REFERENCE In the default bin number field, specify a default bin that is used for film output when no collation value (collation based on the identification information) is complied with. For bin numbers, see the printer service manual.
020-221-02E 01.08.2010 FM5563
IN000516.EPS
V. Double-click the “Bin number” field, and then enter a bin number.
18. If the “Image size specification function for printers” is supported, put a checkmark in the “Supported” check box under (
➔
).
(When the DRYPIX Series is used, be sure to check the check box because the function is supported.)
CR-IR 391CL Service Manual
MU-63
MU-64 19. If the printer supports 10-bit image prints, put a checkmark in the “Supported” check box under
(
➔
).
(When the DRYPIX Series is used, be sure to check the check box because the 10-bit image prints are supported.)
20. Click the downward arrow mark ( film type.
Setting
) for “Film type” and then select a Description
Not specified
Complies with the printer setting.
CLEAR FILM
Selects clear film.
BLUE FILM
Selects blue film.
Selects a paper printout (this option can be selected when a DICOM printer that can generate a paper output is connected).
PAPER
22. Click the downward arrow mark (
) for “Dealing with an image not accommodated within the printer’s image area”, and then select the process to be performed for an image that is not accommodated within the printer’s image area. Setting
DECIMATE
Decimates.
CROP
Crops.
Not specified
Complies with the printer setting.
Does not generate an output because the image is not accommodated within a recordable image frame.
) for “Maximum film density (Dmax)” and then specify the maximum film density. Setting
Description
3.0
Issues an output request to the printer with the maximum density set at 3.0.
Issues an output request to the printer with the maximum density set at 3.6.
3.6
: Default
NOTE The printer setting should be basically complied with. This setup step need not be performed for the DRYPIX Series. For details, see the printer service manual.
020-221-02E 01.08.2010 FM5563
FAIL
: Default
23. Click the downward arrow mark (
) for “How to magnify an image size”, and then select an image magnification method.
: Default * The DRYPIX Series cannot generate paper printouts.
21. Click the downward arrow mark (
Description
Setting
Description
REPLICATE
Provides interpolation by replicating a most similar neighboring color when creating a new pixel for magnification.
BILINEAR
Provides bilinear interpolation when magnifying the image.
CUBIC
Provides bicubic interpolation when magnifying the image.
Does not magnify or reduce the image.
NONE
: Default
➥ REFERENCE Bilinear interpolation When a new pixel is to be generated for magnification, its color is created by averaging the colors of four (linear) neighboring pixels (upper, lower, right, and left pixels). Bicubic interpolation When a new pixel is to be generated for magnification, its color is created by averaging the colors of eight (cubic) neighboring pixels (upper, lower, right, and left pixels and pixels at four corners).
CR-IR 391CL Service Manual
MU-64
MU-65 24. If “CUBIC” was selected in Step 23 above as the image magnification
method, enter a smoothening type in the “Smoothening type” field. (If an image magnification method other than “CUBIC” was selected in Step 23, it is not allowed to enter a smoothening type because the “Smoothening type” field does not become active.)
NOTE For the DRYPIX Series, only the SMOOTH, MEDIUM, and SHARP options are selectable (SMOOTH is selected by the default).
25. Click [OK]. ➔ The system returns to the “Adding film printers” window.
26. Click [Add].
6.2.7 Storage Setup for DICOM Storage Device (option) When the optional DICOM storage device is to be connected, perform setup concerning the other equipment to which images are to be transmitted.
■ Settings accessible from the “DICOM storage setup” window Name
Description
DICOM storage device settings (addition/change) Equipment name (I.)
Equipment name that permits the user to identify the equipment.
Input method: Text input. Maximum number of characters: 16 characters. Acceptable input characters: 1-byte and 2-byte characters.
Host name (II.)
Host name assigned to the equipment.
Input method: Text input. Maximum number of characters: 255 characters. Acceptable input characters: 1-byte characters (A-Z and a-z), 1-byte numerals, and hyphen (-).
IP address (III.)
IP address assigned to the equipment.
Input method: Text input. Acceptable input characters: 1-byte numerals and period (.). The IP address consists of four elements. The value of each element ranges from 0 to 255. Use a period to delimit each element.
DICOM AE name (IV.)*1
This name is used for application entity identification when the DICOM protocol is used.
Input method: Text input. Acceptable input characters: (The “DICOM VR=AE” condition is complied with.) ISO 646 (1990) basic G0 set excluding the following control characters: LF, FF, CR, and ESC. (Maximum number of characters: 16 characters.)
Port number (V.)
Port number of the connected Input method: Text input. DICOM storage device. Acceptable input characters: 1-byte numerals. Value range: 1 to 65535.
➔ The system returns to the “Setting the Film Printer” window.
27. Click [Finish]. ➔ The system returns to the “Setting connection devices” window.
28. Click [Back]. ➔ The system returns to the “Service Utility top” window.
Nonselectable. ON at all times. Input method: Single selection. ON: Used. OFF: Not used.
Specifies the CRImageStorage transfer syntax.*3
Input method: Single selection. Implicit VR Little Endian Explicit VR Little Endian JPEG Lossless
Receivable maximum pixel density size (II.)
Specifies the maximum pixel density of an image that the DICOM storage device can receive.
Input method: Single selection. HQ ST
Setting multi-byte characters (III.)
Specifies whether multi-byte characters are supported by the DICOM storage device.
Input method: Single selection. ON: Supported. OFF: Unsupported.
*1 Enter the SCP (ServiceClassProvider) AE title of CRImageStorage that is registered for the storage device. *2 Only CRImageStorage is supported as the storage output of the CR-IR 391CL. *3 Ensure that this setting complies with the setting for the other equipment.
■ Setup procedure
1.
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
Click [Add]. ➔ The “Addition of DICOM Storage Device” window opens.
5.
Perform the following setup steps:
I. II. III. IV. V.
MU060202.ai
I. II. III. IV. V. 020-221-02E 01.08.2010 FM5563
In the [Equipment name] field, enter the equipment name to be displayed in the study list. In the [Host name] field, enter the host name of the storage device. In the [IP address] field, enter the IP address of the storage device. In the [DICOM AE name] field, enter the AE name of the storage device. In the [Port number] field, enter the port number for the storage device.
CR-IR 391CL Service Manual
MU-66
MU-67 6.
III. In accordance with the other equipment, select “HQ” or “ST” as the [Receivable maximum pixel density size] (it is recommended that you choose “HQ”).
Click [Detailed settings]. ➔ The “Advanced settings for DICOM Storage Device” window opens.
7.
Setting
Perform the following setup steps:
ST
HQ
Description Reception image size maximum density (standard density). Reception image size maximum density (high density).
: Default
IV. If the other equipment provides support to multi-byte characters for the “Setting multi-byte characters” box, checkmark it ( ➔ ).
II.
I.
8.
Click [OK]. ➔ The system returns to the “Addition of DICOM Storage Device” window opens.
9.
Click [Add]. ➔ The system returns to the “DICOM Storage Settings” window.
III.
10. Verify that the registered device is added, and then click [Finish]. ➔ The system returns to the “Setting connection devices” window.
IV.
11. Click [Back]. ➔ The system returns to the “Service Utility top” window. MU060203.ai
I.
Put a checkmark in both the “CRImageStorage” and “Verification” abstract syntax check boxes, which are located on the left-hand side under “Supported abstract syntaxes_transfer syntaxes.” II. In accordance with the other equipment, select a transfer syntax from the right-hand side field under “Supported abstract syntaxes_transfer syntaxes.” Setting
► INSTRUCTION When you have performed settings for output devices in the Service Utility, be sure to perform “Setting a destination for image output” in the User Utility.
Description
ImplicitVRLittleEndian
VR* is included in the data elements (implicit VR*). The data consists of [tag/VR*/value length/value].
ExplicitVRLittleEndian
VR* is not included in the data elements (explicit VR*). The data consists of [tag/value length/value].
JPEGLossless
JPEG lossless compression
: Default VR* : Value Representation
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-67
MU-68 6.3 Linkage Function Perform functional setup for linkage with another system. “Linkage function” is an optional setup item.
► INSTRUCTION When settings were performed for output devices in the Service Utility, be sure to perform “Setting a destination for image output” in the User Utility.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-68
MU-69 6.4 Film Annotation Characters This function determines settings and formats for outputting annotation characters on film. Presented herein are the settings necessary for enabling the print output function.
■ Setup necessary when editing the film annotation character format Describes various setup items for the film annotation character format. For details of configurations used for the film annotation character format, see “■ Settings accessible from the “System settings” window” in “6.1 System.”
■ Film annotation character setup (direct editing of FilmStrFmt) Describes the film annotation character setup procedure defined for each FMT No.
■ Basic terms used for film output processing ● Film size
● Image size The “image size” refers to the size of an image read on the Image Reader. Currently, the six image sizes, 14"×17", 14"×14", 10"×12", 10"×8", 24×30cm and 18×24cm, can be read on the CR-IR 391CL system. The 14"×17" size image can also be called the 35×43cm size image and the 14"×14" size image, the 35×35cm size image. Note that the 24×30cm and 18×24cm size images have basically no other denominations. As shown in the table below, the RU has RUs for both the inch-system IP and the metric-system IP. RU type Inch-system RU Metric-system RU
Image sizes that can be read 14"×17", 14"×14", 10"×12" and 10"×8" 35×43cm, 35×35cm, 20×30cm and 18×24cm
● Print formats The print format is a layout where images are allotted on film for printout. The CR-IR 391CL system supports the following print formats : Single, 2on1 and 4on1
The “film size” refers to the size of a film used for printout of an image. In the CR-IR 391CL system, the following five film sizes are supported: 35×43cm, 35×35cm, 26×36cm, 10"×12" and 20×25cm
Film Image
The 35×43cm size is called in some cases the 14"×17" size, and similarly the 35×35cm size is called the 14"×14" size, the 26×36cm size is called the 11"×14" size, and the 20x25cm size is called the 10"×8" size. Single
2on1
4on1 F0000020.EPS
Single : One image is allotted on film. 2on1 : Two different images are allotted on film. 4on1 : Four different images are allotted on film.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-69
MU-70 2636cm, 3543cm/14"17", 8"10", 3535cm/14"14" and 10"12" film printout patterns [Reference] Shown below are the film output patterns formed on 2636cm and 3543cm films. 2636cm film 4 4 4
5
4
5
4
5
4
5
4
5
5
4
5
5 2 1 4
2
2
6
6
5
2
2
1
1
2on1 (different sizes)
2on1
6
18×43cm 2on1
Pantomography 2on1
Normal Single
12
11
12
11 13 4
14
12
11
12
11
13
5 13
14
13
14
1 2
Pantomography Single
1
6
10×14inch Single (HQ)
14×10inch Single (HQ)
18×24cm 2on1 (100% size)
14
- Legends (items are according to the FMT Nos.) 1 : Patient information area 2 : Image processing parameter area 4 : Hospital name area 5 : Area for barcode, MPM code, etc. 6 : Patient information/image processing parameter area 11 : Reduced patient information area 12 : Reduced image processing parameter area 13 : Patient information area 14 : Image processing parameter area F0000018.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-70
MU-71 35×43cm film 12
11
12
11
12
11
12 5
4 13
13
14
14
2 1
35×43cm/14×17inch Single (HQ)
18×43cm Single (HQ)
18×43cm 2on1
35×35cm/14×14inch Single (HQ) 11
12
11 4
5
13
12
35×43cm
1843
12
8×10inch
1
4
15
15×30cm
5 5 1
35×35cm
5
1
4
15
15×30cm
020-221-02E 01.08.2010 FM5563
Different images 4on1 (example)
5
15×30cm
Pantomography 2on1
15
43×35cm/17×14inch Single (HQ)
4
2
14×14inch
1
Pantomography Single
2
12
14 11
2
11
15
15×30cm 15
Different images 4on1 (example)
15×30cm 4
2
- Legends (items are according to the FMT Nos.) 1 : Patient information area 2 : Image processing parameter area 4 : Hospital name area 5 : Area for barcode, MPM code, etc. 6 : Patient/image processing parameter area 11 : Reduced patient information area 12 : Reduced image processing parameter area 13 : Patient information area 14 : Image processing parameter area 15 : Patient information/image processing parameter area
6
Different images 2on1 (example)
F0000019.EPS
CR-IR 391CL Service Manual
MU-71
MU-72 20×25cm film (A)
(B)
(D)
(C)
21
21
21
22
(F)
(E) 21
22
4
5
4
5
6 22
6
22
18×24cm Single
18×24cm Single
Pantomography 18×24cm/8×10inch (ST) Single
For exposure menus other than mammography, images will be delivered in the (C) format. For “right breast (DSR)” (MPM code: 0317) mammographic exposure menus, images will be delivered in the (A) format. For other than “right breast (DSR)” (MPM code: 0317) mammographic exposure menus, images will be delivered in the (B) format.
Vertical 8×10inch
18×24cm/8×10inch, 24×30cm/10×12inch, 35×35cm, 35×43cm, 43×43cm (ST/HQ) Single
- Legends (items are according to the FMT Nos.) 4 : Hospital name area 5 : Area for barcode, MPM code, etc. 6 : Patient information/image processing parameter area 21 : Patient information area 22 : Image processing parameter area
F0000021.EPS
35×35cm film 12
11 13
14
35×35cm/14×14inch Single
020-221-02E 01.08.2010 FM5563
- Legends (items are according to the FMT Nos.) 11 : Reduced patient information area 12 : Reduced image processing parameter area 13 : Patient information area 14 : Image processing parameter area
F0000022.EPS
CR-IR 391CL Service Manual
MU-72
MU-73 10"×12" film (B)
(A) 21
22
(D)
(C) 21
22
21
22
10×12inch (ST/HQ)
22
21
24×30cm (ST/HQ)
10×12inch (ST/HQ)
24×30cm (ST/HQ)
(G)
(I)
(H) 5
4
(E)
4
5
(J) 5
4
1
8×10inch, vertical 8×10inch (ST/HQ)
21
21
22
22
24×30cm (ST/HQ)
24×30cm (ST/HQ)
(K)
(L) 5
4
5
4
2
2 6
5
4
(F)
8×10inch, vertical 8×10inch (ST/HQ)
6
18×24cm (ST/HQ) 502 8×10inch
1
18×24cm (ST/HQ) 502 8×10inch
6
6
18×24cm (ST/HQ)
18×24cm (ST/HQ)
- Legends (items are according to the FMT Nos.) 1 : Patient information area 2 : Image processing parameter area 4 : Hospital name area 5 : Area for barcode, MPM code, etc. 6 : Patient information/image processing parameter area 21 : Patient information area 22 : Image processing parameter area
F0000035.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-73
MU-74 6.4.1 Film Annotation Character Setup (Direct Editing of FilmStrFmt) This section describes the film annotation character setup procedure for FMT numbers, which are indicated under “ 26×36cm, 35×43cm/14"×17", 8"×10", 35×35cm/14"×14" and 10"×12" film printout patterns [Reference]” in “6.4 Film Annotation Characters.”
1.
Start the Service Utility mode. The “Service Utility top” window opens.
2.
Click [Film annotation characters]. The “Setting film annotation character” window opens.
Film annotation character setup is performed by directly editing the contents of the FilmStrFmt file.
3.
IMPORTANT
4.
Edit the file in the format described later.
5.
Overwrite the contents of the FilmStrFmt file and then close Notepad (Notepad.exe).
When directly editing the contents of the FilmStrFmt file, be sure to select “No” as the configuration setting for Nos. 13 to 15 (Enable Auto Edit Function of the Film Annotation Character Format) in “6.1 System.” If you directly edit the contents of the file while the setting is left ON, the Service Utility may restore the previous contents of the FilmStrFmt file. Therefore, when editing the FilmStrFmt file, follow the steps indicated below. 1. If it is necessary to edit the printer-related configuration settings with the Service Utility, do it first. 2. Complete an editing procedure with the Service Utility (only the configuration settings related to the printer), save the results, and then change the settings for Nos. 13 to 15 to “No.” 3. Finally, edit the contents of the FilmStrFmt file. Once the FilmStrFmt file has been subjected to direct editing, you should avoid using the “Auto Film Annotation Character Format Generation Function.” The setting for “Nos. 13 to 15 Enable Auto Edit Function of the Film Annotation Character Format” must remain “No.” After the FilmStrFmt file is edited, you should keep a record of the applied changes within the FilmStrFmt file in the form of a comment.
020-221-02E 01.08.2010 FM5563
Click [Editing a film annotation character definition file]. The FilmStrFmt file opens in Notepad.
u NOTES u When editing the FilmStrFmt file, make sure to start it by performing “Film annotation character settings” in the Service Utility mode. Because character codes used in the FilmStrFmt file are based on the “Unicode” system, do not edit it directly. Use the Backup Utility function to obtain a backup copy of the “Setup Information” before performing editing. For the application software version upgrade processing, fully re-edit the FilmStrFmt file that is installed at upgrade processing, without restoring the FilmStrFmt file that has been backed up on an FD or the like.
6.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
CR-IR 391CL Service Manual
MU-74
MU-75 6.4.2 FilmStrFmt File Description Format Following is the FilmStrFmt file description format. Format name
Example of description Area size and position FMT1 = (1202,188,L) [ SetFontTypeFace ("MS Gothic") ;
Command
Command for specifying the font type
Command for specifying the font size SetFontSize (55) ; FilmStrings(" ",%-10s), (0019,2F90); LineSpacing (1) ; Command for specifying the line spacing SetFontSize (30) ; FilmStrings(" ",%-20PN1), Command for specifying the character string (0010,0010); SetFontSize (48) ; Command for specifying the character string FilmStrings(%-10s," ",%-10s," ","[",%SEX1,"]"," ",%AGE1), (0010,0020),(0011,2F10),(0010,0040),(0010,0030); LineSpacing (10) ; SetFontSize (44) ; FilmStrings("EXP:",%DATE8," ","[",%TIME1,"]"," ","SC:",$MAG,"%"," ",$FUNC_PROC), (0008,0022),(0008,0032);
Settings for one film annotation character format ]
FR000015-2.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-75
MU-76 Cautions in editing the FilmStrFmt file
Following are the details of each setting. Format name Describes the name of the format. Do not change the description for the CR-IR 391CL.
REFERENCE The ImageSize.env file stored in the “C:\ProgramData\Fujifilm\Hobbit\Config” folder defines which format should be used by an output film.
Following are the cautions to observe when editing the FilmStrFmt file. “#” at the top of a line indicates a comment line. Unnecessary spaces, tabs and line changes will be disregarded. Describe commands by the use of “;” between them.
u NOTE u Because FilmStrFmt is a Unicode-formatted text file, a Unicode- formatted NotePad included in the OS is necessary for file editing.
Area size and position Specify the area size and position between parentheses to the right of the format name, connecting them with each other using an equal sign (=). X-size, Y-size, position Item
Description
X-size
Specifying the width of the film annotation character display area (0
Font specifying commands Font specification Command Font type specification Font size specification Font style specification
SetFontTypeFace SetFontSize SetFontStyle
Character string specifying commands Output character string specification
Command
Line spacing specification LineSpacing Output format and attribute specification FilmStrings 020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-76
MU-77 6.4.3 Changing the Film Annotation Characters
Specifying the font type Use the “SetFontTypeFace” command to specify the font type. This command will be effective from the line describing “SetFontTypeFace” to the line that directly precedes another “SetFontTypeFace” description.
u NOTE u Because no default values are available for font type, make sure to specify values for each film annotation character format. SetFontTypeFace description format SetFontTypeFace (“font name”); Enclose a True-Type font name between quotation marks (“ ”). Any of the fonts that are available when Windows 2000 is installed can be specified. SetFontTypeFace description examples Specifying MS Gothic SetFontTypeFace(“MS Gothic”); Specifying Times New Roman SetFontTypeFace(“TimesNewRoman”); SetFontTypeFace printout examples “MS Gothic” specified
Specifying the font size Use the “SetFontSize” command to specify the font size. This command will be effective from the line describing “SetFontSize” to the line that directly precedes another “SetFontSize” description.
u NOTE u Because no default values are available for font type, make sure to specify values for each film annotation character format. SetFontSize description format SetFontSize (font size); Specify a font size using values expressed in terms of pixels. SetFontSize description examples Specifying the font size to be 20 pixels SetFontSize(20); Specifying the font size to be 40 pixels SetFontSize(40); SetFontSize printout examples Font size specified as 20 pixels
Use the “SetFontStyle” command to specify the font style. This command will be effective from the line describing “SetFontStyle” to the line that directly precedes another “SetFontStyle” description. SetFontStyle description format
Specify line spacing with the “LineSpacing” command. LineSpacing description format LineSpacing (line spacing); Use an integer between 1 and 400 (in terms of pixels) to specify line spacing for film annotation characters.
SetFontStyle (font style); Select either of the following. Bold : BOLD Italic : ITALIC When selecting the two font styles at the same time, use “|” to delimit them (ex.: BOLD|ITALIC).
u NOTE u Specifying “ITALIC” for characters displayed in reverse video can make it look like they are missing in parts. “ITALIC” is thus disabled for reverse-video characters. SetFontStyle description examples Bold specified SetFontStyle (BOLD);
LineSpacing description examples Specifying line spacing of 5 pixels LineSpacing(5); Specifying line spacing of 50 pixels LineSpacing(50); LineSpacing printout examples Line spacing of 5 pixels specified
1234567890ABC
EXP: 1998.09.29 [10:42]
G1.2G#0.70+0.30R4R0.5 FR000024.EPS
Specifying bold and italic at the same time SetFontStyle (BOLD|ITALIC) ; SetFontStyle printout examples
MU-79 Specifying print format and attributes Use the “FilmStrings” command to specify character strings. FilmStrings description format FilmStrings(format descriptor1, format descriptor2,… ),(attribute descriptor1),(attribute descriptor2)… ; Format descriptor “n” Specifies the “format descriptor” that shows the format in which character strings are printed out. A maximum of 512 descriptors can be specified. However, the maximum total length of all character strings represented by the format descriptor is 256 characters. For details, see “6.4.4 Format Descriptors.”
Attribute descriptor “n” Specifies the “attribute descriptor” that shows an attribute to be printed out as a character string. Basically, one attribute descriptor is given per format descriptor. The attribute descriptor is a tag number that represents the attribute to be printed out. It is not necessary to specify the attribute descriptor when the format descriptor is attribute-specific. For details, see “6.4.5 Attribute Descriptors.”
FilmStrings description examples Printing out patient and exposure information The patient and exposure information indicated below are printed out. : Character string of variable length, up to 20 characters Patient name : “[“+M or F+”]” Sex : Character string of variable length, up to 15 characters Patient ID : YYYY.MM.DD + “B” Date of birth Date of examination : Character string of variable length, up to 15 characters Date of exposure : “EXP”+ YYYY.MM.DD Time of exposure : “[“+HH:MM+”]” FilmStrings(“”,%*20s,“[“,%SEX2”,]”),(0010,0010),(0010,0040); FilmStrings(“”,%*15s,““,%DATE1”,B”),(0010,0020),(0010,0030); FilmStrings(“”,%*15s),(0008,0050); FilmStrings(“EXP:”,%DATE1,“[“,%TIME1”,]”),(0008,0020),(0008,0030) Printing out image processing parameters The following image processing parameters are printed out. : G + GA + GT + “#” + GC + GS Gradation processing parameters : R + RN + RT + RE Frequency processing parameters : L + latitude Latitude (L value) System sensitivity (S value) : S + system sensitivity : C + gradation correction + density Corrections (gradation and density) correction Image magnif./reduc. rate : “SCALE:” + percentage FilmStrings(“ ”,$IMG_PROC); FilmStrings(“ “,$L,$S,$CS_SS”, “,SCALE:”,$MAG,“%”);
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-79
MU-80 6.4.4 Format Descriptors
FilmStrings printout examples Patient and exposure information printout
Described herein are the format descriptor types and content presented in “6.4.3 Changing the Film Annotation Characters Specifying print format and attributes.”
JOHN SMITH [M] 02247393 1998.04.08B 1234567890ABC EXP: 1998.09.29 [10:42]
Three format descriptor types are available. The first character of each format descriptor identifies the type. FR000026.EPS
Descriptor type Character string control descriptor
%
Character string style descriptor
$
Attribute-specific format descriptor
REFERENCE The C language command “printf” format-specified method has been adopted basically for the format descriptor that specifies the character string print format. However, the “printf” method has been expanded to make the following items available. Special print character formats, including characters in reverse video Some VR-specific patterns, including date format Information not assigned tag numbers, such as film image magnification/reduction Handling of a multiple number of attributes in a group (such as image processing parameters) Format descriptors not required by the “printf” method have been deleted.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-80
MU-81 Character string control descriptor (\) Shown below are format descriptors that control character strings. Descriptor
Description
\t
Inserts tabs. Each tab is equivalent to 80 pixels.
\r
Displays the characters that follow in reverse video, which will be effective until “\r” is specified again.
Character string style descriptor (%) This format descriptor indicates that the character string style is composed as follows. %[flag][width][type] [flag] Shows the information necessary for controlling character string length. Can be omitted. If [flag] has been specified, [width] must also be specified. Flag description
Description
-
Outputs character strings padded from the left. This is effective only when fixed length has been specified using [width]. If it has not, character strings will be output padded from the right.
*
Shows that the character string length specified by [width] consists of a maximum number of characters. If the length of the character string to be output is longer than that specified by [width], it will be output as specified by [width]. If the length of the character string to be output is shorter than that specified by [width], it will be output as it actually is.
Example of description
%*10s
Example of printout
ABCDEFGHIJ A character string of a maximum of ten characters [flag] (*=maximum number of characters) A value specified by [width] FR000031.EPS [type] (s=character string data) [width]
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-81
MU-82 [width] Shows the character string length. When “*” has been specified for [flag], this indicates the maximum character string length. When it has not, it indicates the fixed length.
[type] Shows the type of character string notation. This cannot be omitted. Two types are available: the standard type supported by C language and a special type added exclusively for film annotation characters.
Only when “f” has been specified for [type] the “a.b” style specification will be effective, where “a” indicates the number of digits (of an integer) and “b” the number of decimal places.
The standard type uses small letters to annotates character strings and the special type uses large alphanumerics. Numbers cannot be used at the beginning of character strings.
In this case, “a” can be omitted. Omitting “a” will not determine the number of digits while determining only the number of decimal places. When “f” has been specified for [type], it will not be possible to omit only “b.” Specifying 0 for “b” will cause an error.
The table below shows character strings annotation types. In the table, attributes other than those listed in the “Attribute VR” column (UN and SQ) cannot be output as film annotation characters.
Example of description
Example of printout
%*10d
1234567890 [type] (d=a decimally expressed An integer of a maximum of integer ) ten numbers [width] Character string length [flag] (*=maximum number of characters)
Example of description
Annotation type
Attribute VR
Note
d
OB,OW,SL,SS, UL,US
Outputs binary data in decimal form. Image data and overlay data cannot be selected.
x
AT,OB,OW,SL, SS,UL,US
Outputs binary data in hexadecimal form. Letters will be output in capitals.
f
FL,FD
Outputs binary data in floating-decimal-point form.
s
AE,AS,CS,DS, DT,IS,LO,LT, PN,SH,ST,UI
Outputs character string data. Character strings of a maximum length of 256 characters can be output.
Example of printout
%*5.1f
1234.2 [type] (f=decimally expressed floating-point number) [width] Character string length [flag] (*maximum number of characters)
020-221-02E 01.08.2010 FM5563
Standard type
A maximum of five integers, one decimally expressed floating-point number FR000032.EPS
CR-IR 391CL Service Manual
MU-82
MU-83 Attribute-specific format descriptor ($)
Special type Annotation type
DATEn
Attribute VR
DA
Note Outputs various date display patterns in accordance with the values specified by “n.” Patterns are as follows. DATE1 : 1998.12.13 DATE2 : 1998.DEC.13 DATE3 : 12.13.1998 DATE4 : DEC.13.1998 DATE5 : 13.12.1998 DATE6 : 13.DEC.1998 DATE7 : H1.01.13 DATE8 : 1.01.13 Outputs various time display patterns in accordance with the values specified by “n.” This setting is valid only for information for which “Attribute VR” has been set to “TM.” Patterns are as follows. TIME1 : 10:51 TIME2 : 10:51:20 TIME3 : AM 10:51
TIMEn
TM
AGEn
Outputs various age display patterns in accordance with the values specified by “n.” This setting is valid only for information on date of birth. Patterns are as follows. AGE1: 25 years, 1 year and 8 months, 1 month and 10 days, DA 13 days (date of birth AGE2: 25Y, 1Y8M, 1M10D, 13D Output format will differ with the relevant age, as follows. only) 0 years to 0 years and 1 month or under : ** days 0 years and 1 month up to 1 year : ** months 1 to 8 years : ** years and ** months 8 years or over :** years
SEXn
PNn
020-221-02E 01.08.2010 FM5563
CS (sex only)
PN
Outputs sex display patterns in accordance with the values specified by “n.” This setting is valid only for information on sex. Patterns are as follows. SEX1: Male, female, (for others, 1 space) SEX2: M, F, O (for others, 1 space) Outputs name display patterns in accordance with the values specified by “n.” This setting is valid only for information with PN specified for VR. Display patterns follow. PN1: For printing kana alongside kanji (ANK characters are printed only when ideographic characters are used.) PN2: Only for use with ideographic characters (Ideographic characters are printed if used. Left blank if not used.) PN3: Only for single-byte characters (Single-byte characters are printed if used. Left blank if not used.) PN4: For display of multi-byte characters (Ideographic characters are printed if used. Single-byte characters are printed if they are not used. Left blank if neither are used.)
The attribute-specific format descriptor is used for outputting a multiple number of attributes in groups or for outputting information that has not been assigned tag numbers. The attribute-specific format descriptor requires no attribute descriptors (the tag numbers shown below). The table below presents attribute-specific format descriptors. Table of attribute-specific format descriptors (1/2) Descriptor
Information displayed
Image $IMG_PROC processing parameter
Sample character format Outputs image processing parameters (G,R,O,D,U,H,P). Parameter output will depend on the image processing parameter formats described hereafter.
Note Processing parameters for any processing that is not subjected to in view of processing path will not be output.
$GAMMA
Gradation processing parameter
G 1.0G#1.6-0.20
$BETA
Frequency processing parameter
R 4R0.5
Parameters will not be output during multi-frequency processing (MFP).
$1DUSM
1D-USM processing parameter
O 3V1.0
Parameters will not be output if this process is not performed.
$DRC
DRC processing parameter
D 2A0.8
Parameters will not be output if this process is not performed.
$H_USM
MFP-USM processing parameter
U FA0.8
Parameters will not be output if this process is not performed.
$H_DRC
MFP-DRC processing parameter
H FA0.8
Parameters will not be output if this process is not performed.
$PEM
PEM processing parameter
P ABC1.5
Parameters will not be output if this process is not performed.
CR-IR 391CL Service Manual
–
MU-83
MU-84 6.4.5 Attribute Descriptors
Table of attribute-specific format descriptors (2/2) Descriptor
Information displayed
Sample character format
Note
$MOD
Image processing * parameter change mark
$CS_SS
Term of correction
C *1.0/1.5
For both gradation correction and density correction, parameters are output converted to character strings.
$FCR_ID
FCR image ID
C 001
IDs will be output by changing the image numbers.
$AP_PA1
Right-andleft reversal mark (1/2)
Parameters will be output only when they have been changed.
Я
Can be output only when image is reversed.
$AP_PA2
Right-andleft reversal mark (2/2)
AP (PA)
“PA” will be output when reversed and “AP” when not reversed.
$IP_NUM
IP number
0412657
IP numbers will be output removing a and c before and after the IP number respectively.
$MAG _RATE
Image magnif. rate
67
Can be output only when the image size requested has been set.
$FUNC _PROC
Pair processing information
RT-01 is for image processing type RT.
Image processing type (0019,2F40) Set numbers (0021,2F30) Image numbers in the set (0021,2F40) ES 01 02-01 is for Pair processing information numbers an image processing (0021.2F50) type other than RT. This information is output only when all of the four energy subtraction parameters are within the range between A and T. Energy subtraction parameter (50F1, 2F06). Subtraction registration result (50F1, 2F07) Normal : @ is not added. Abnormal : @ is added.
$ES
Energy subtraction information
E AGGH @
$L
L value
L 2.0
–
$S
S value
S 20000
–
$IMG_PS
020-221-02E 01.08.2010 FM5563
Pixel value
0.10->0.15
Described next are the specific types and contents of the attribute descriptors discussed in “ Specifying print format and attributes” under “6.4.3 Changing the Film Annotation Characters.” The attribute descriptor is information used to specify several kinds of attributes to be printed out as film annotation characters. One attribute descriptor can be described for each format descriptor. The attribute descriptor represents a tag number for the attribute to be printed out.
Attribute descriptor description format Following is the attribute descriptor description format. (gggg,eeee) gggg : Group number. Fixed four digits in hexadecimal form. eeee : Element number. Fixed four digits in hexadecimal form.
Attribute descriptor description cautions Parentheses “( )” are required when describing a tag number. Use a comma “”, between attributes. Use a comma “”, between a group and an element. If the specified tag is not available, use one half-size space. For the patient’s name, create a character string after delimitation conversion. When printing out a kanji character string, remove the ESC sequence and then create the string. Handle control characters within LT and ST as spaces. For a tag for which VM is 1 or more, only the head information will be printed out. However, information for the character string will be printed out including the “\” that represents delimitation.
Pixel value (0018, 1164) while an image is read, as well as pixel value (used for image processing) while it is printed will be output. “****” will be output when no pixel value information is available.
CR-IR 391CL Service Manual
MU-84
MU-85 Attributes that can be printed out using the CR-IR 391CL Tables below show attributes that can be output using the CR-IR 391CL’s DICOM Print function. Attributes that can be printed out using the CR-IR 391CL and its attribute descriptors (1/3) Attribute 1
Hospital (institution) name
2
IP number
3 4
Annotation
Film annotation characters
kanji
(0009, 2F80)
%s
(0008, 0080)
Excluding a and c.
04012657
$IP_NUM
(0018, 1004)
EDR mode
A, S, F , M
$EDR_MODE
(0019, 2F50)
Menu code
0900
%s
(0018, 1401)
A 001
$FCR_ID
–
$IMG_PROC
–
System ID
A to Z
Image number
The last 3 digits in decimal expression.
Gradation proc.
γ -identifying characters GA, GT, GC, GS
G .0G#1.6-0.20
$GAMMA
–
Frequency proc.
β -identifying characters RN, RT, RE
R 4R0.5
$BETA
–
1D-USM
1D-USM identification characters ORN, ORD, ORE
O 3V1.0
$1DUSM
–
DRC
DRC identification characters DRN, DRT, DRE
D 2A0.8
$DRC
–
MFP-USM
MFP-USM identification characters HRN, HRT, HRE
U FA0.8
$H-USM
–
MFP-DRC
MFP-DRC identification characters HDN, HDT, HDE
H FA0.8
$H_DRC
–
∗
$MOD
–
GPR
GPR processing flag
G
$GPR
–
FNC
FNC processing flag
F
$FNC
–
Exposure menu name
kanji ANK
CHEST GENERAL
Normalization conditions + correction term
%s
(0019, 2F32)
%s
(0018, 1400)
–
–
Latitude
Latitude identification character Latitude
L 2.0
$L
–
System sensitivity
System sensitivity identification character System sensitivity
S 20000
$S
–
Correction term
Correction term identification character, gradation correction, density correction
C *1.0/1.5
$CS_SS
–
1010181139
%s
7
8
%s FUJI HOSPITAL
Image proc. condition change mark
6
Attribute descriptor
ANK
Image proc. conditions
5
Format descriptor
Patient ID
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
(0010, 0020)
MU-85
MU-86 Attributes that can be printed out using the CR-IR 391CL and its attribute descriptors (2/3) Attribute 9
Patient name
10 Date of exposure
Annotation
Format descriptor
Attribute descriptor
%s
(0011, 2F10)
FUJI TARO
%s
(0010, 0010)
… EXP: ..
:” “ “EXP:”
ANSI short format
1998.12.13
%DATE1
ANSI long format
1998.DEC.13
%DATE2
American short format
12.13.1998
%DATE3
American long format
DEC.13.1998
%DATE4
European short format
13.12.1998
%DATE5
European long format
13.DEC.1998
%DATE6
Japanese date format
H10.12.13
%DATE7
kanji ANK
Japanese date (kanji) format 11
Film annotation characters
10.12.13
–
(0008, 0020)
%DATE8
Sex: kanji
kanji
[ ] or [ ]
%SEX1
(0010, 0040)
Sex: ANK
Alphabet
[M] or [F]
%SEX2
(0010, 0040)
Y, YM, MD, D
–
–
kanji
25 , 1 8
Alphanumerics
25Y, 1Y8M 1M10D, 13D
%AGE2
YYYY.MM.DD
1989.12.13
%DATEn, “ ”
YYYY.MM.DDB
1989.12.13B
%DATEn, “B”
Pair proc.
Proc. type, pair no., IP and IL
ES01 02-01
Routine proc.
Indicates the routine and serial routine processing nos.
RT-01
14 Time of exposure
Hour and minute
[10:51]
“[“ ,%TIME1, ”]”
(0008, 0030)
15 Film mark
Film annotation characters1
PA
%s
(0019, 2F90)
Age 12 Date of birth 13
,1
(0010, 0030)
$FUNC_PROC
:” “ $MAG, “%”
–
SCALE : 100%
“SCALE:”, $MAG, “%”
–
–
–
17 Patient name (2)
020-221-02E 01.08.2010 FM5563
%AGE1
: 100% 16 Magnif./reduc. rate
18 Data compression code
10 , 13
: 22 CC : 22
“
:”,%
(0029, 2F50)
“CC:”,%s
(0029, 2F50)
CR-IR 391CL Service Manual
MU-86
MU-87 Attributes that can be printed out using the CR-IR 391CL and its attribute descriptors (3/3) Attribute 19 Energy subtraction information
Annotation Error flag for energy subtraction parameter table identification characters Ta, Tb, Tc, Td (only at error occurrence)
20 Right-and-left reversal mark
Film annotation characters
Format descriptor
Attribute descriptor
E AGGH @
$ES
–
R , AP (PA)
$AP_PA1 or $AP_PA2
–
To print out attributes other than those listed above, set the relative tag number of the attribute specified in the Conformance Statement. See “DICOM Conformance Statement.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-87
MU-88 6.4.6 Film Annotation Character Verification Procedure FilmStrFmt file editing results can be verified using the Service Utility. The procedure is described below.
1.
Click [Film annotation characters]. The “Setting film annotation characters” window opens.
3.
Perform setup for converting an entered person name.
1.
Start the Service Utility. The “Service Utility top” window opens.
2.
6.5 Person Name Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Person name]. ➔ The “Person name setting” window opens.
Click [Displaying film annotation characters]. The “Display film annotation characters” window opens.
NOTE If there is any incorrect setting, the message “[60642 Film annotation character generation has failed” may appear on the display.
4.
Click the downward arrow mark ( type from the pull-down menu.
) for “FMT1” and select a format
REFERENCE FMTX_1 : Film annotation character definition for 20 pix/mm images. (If FMTX_2 is also provided, it is used for 20 pix/mm images.) FMTX_M : Film annotation character definition for mammographic images.
5.
Click [OK]. The film annotation characters are displayed in the selected format.
6.
Click [Finish]. The system returns to the “Setting film annotation characters” window.
7.
To verify the other film annotation characters, repeat Steps 4 and 5.
8.
Click [Finish]. The system returns to the “Service Utility top” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-88
MU-89 3.
Click the downward arrow mark (
4.
) for
Double-click the “Setup value” field on the right-hand side.
and choose “USER_IF” from the pulldown menu.
NOTES
Setup value field
Do not change the settings for “DICOM_IN” and “DICOM_OUT” because they represent the standard DICOM specifications.
MU000010.ai
5.
As regards “USER_IF”, modify relevant settings only.
Change the setup value. ❍ If the double-clicked field looks like
➔ The “USER_IF” classification appears in the window.
(direct input
field) : I. Use the mouse to select a desired text and enter it from the keyboard. ❍ If the double-clicked field consists of a check box : The check box alternates between ON and OFF each time it is doubleclicked.
6.
Perform the setup steps indicated below: I. II. III. 00000424.ai
I.
To validate this standard (condition) change, checkmark it (
➔
).
II. Enter a one-byte character delimiter between name elements.
NOTES Any one-byte characters can be used as a delimiter. However, a one-byte space ( ), hyphen (-), comma (,) or period (.) should normally be used. One or two kinds of delimiters can be defined (either can be used as a delimiter). For instance, enter “-”, if you wish to define both of hyphen and comma. Input example: Element3=given, middle-family As regards Delimiter1 for USER_IF, a one-byte space is set as a default.
MU000009.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-89
MU-90 III. Enter a multi-byte character delimiter between name elements.
8.
Set up name elements for multi-byte characters.
NOTES
Enter name elements directly on the keyboard. To separate one name element from the other, use a delimiter defined in Step 6. above.
Any one- or two-byte characters can be used as a delimiter. However, a twobyte space ( ) or hyphen (–) should normally be used.
One name element (family (name)) Two name elements (family given) Three name elements (family given middle) Four name elements (family given middle prefix) Five name elements (family given middle prefix suffix)
One or two kinds of delimiters can be defined (either can be used as a delimiter). For instance, enter “–” if you wish to define both of two-byte space and hyphen. Input example: Element3=given – middle family As regards Delimiter2 for USER_IF, a two-byte space is set as a default.
7.
Set up name elements for one-byte characters.
Enter name elements directly on the keyboard. To separate one name element from the other, use a delimiter defined in Step 6. above. One name element (family (name)) Two name elements (family given) Three name elements (family given middle) Four name elements (family given middle prefix) Five name elements (family given middle prefix suffix)
MU000052.EPS
9.
Click [OK]. ➔ The system returns to the “Service Utility top” window.
MU000051.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-90
MU-91 4.
6.6 Modality Settings
Select the LUT to be set from the pull-down menu.
CR-IR 391CL can apply following modality lut to the image according to the modality of each image. N/A, P-Value, gamma 2.2, FCR Perform LUT setting corresponding to each modality.
1.
Start the service utility. ➔ The “Service Utility top” window opens.
2.
Click [Modality setting]. ➔ The “Modality Settings” window opens.
3.
Click the “Gradation characteristic of image” column of the image type for which the setting is to be changed. ➔ A pull-down menu button is displayed for the respective “Gradation characteristic of image” column.
MU060211.EPS
5.
Click [OK]. ➔ The system returns to the “Service Utility top” window.
MU060210.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-91
MU-92
7. Maintenance Tool
7.1 Database Utility
Use the maintenance tool to achieve recovery or perform a maintenance task during installation or troubleshooting.
The term “DB” may be used to represent a database. The database utility is used to initialize the image database, delete output images from the image output queue (clear the image output queue), or initialize the patient database.
WARNING Exercising a function of the database utility deletes all images from the local database. Before using a database utility function, be sure to verify that all recovery images are stored on a DVD. For details on the recovery procedure, see under “1.14 Reconstructing the Image Database” under “MC: Checks, Replacement and Adjustment of Parts.”
MU000016.ai
Name
Description
Database utility
Discards the current database and creates a new one.
Acquiring EDR backup data
Acquires or stores the EDR backup data about a selected local image.
Connection check Checks the connections to the equipment that is defined through “Connected equipment” under “Service settings.” Log display/edit
Displays or clears the number of IP exposures.
Event log display
Starts Event Viewer of the OS.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-92
MU-93 4.
7.1.1 Initializing the Patient Database
➔ The command prompt window for an initialization process opens.
This section describes the procedure for discarding the current patient database and creating a new one.
1.
Click [OK].
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Database Utility].
MU000011.EPS
➔ The “Database Utility” window opens.
➔ Wait until the message “Press any key to continue...” appears.
MU000012.EPS
5.
Press any key on the keyboard. ➔ The “Console verification” window opens.
6.
Click [OK]. ➔ The system returns to the “Database Utility” window.
7.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
MU000033.ai
3.
Click [The patient database is initialized.]. ➔ The “Console warning” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-93
MU-94 7.1.2 Initializing the Output Queue
2.
Click [Database Utility]. ➔ The “Database Utility” window opens.
This section describes the procedure for deleting remaining output requests from the current output queue.
NOTE If images are left on the image output queue, it means that a connected equipment failure or other abnormality has occurred. Confirm the status that is indicated as output queue information, see the symptoms in the “MT: Machine Troubleshooting”, determine the cause of abnormality, and take appropriate remedial action.
1.
Start the Service Utility. ➔ The “Service Utility top” window opens.
MU000033.ai
3.
Click [The image output queue is initialized.]. ➔ The “Console warning” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-94
MU-95 4.
Click [OK]. ➔ The command prompt window for an initialization process opens.
MU000011.EPS
➔ The “Console verification” window opens.
5.
Click [OK]. ➔ The system returns to the “Database Utility” window.
6.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-95
MU-96 7.1.3 Initializing the Image Database
2.
Click [Database Utility]. ➔ The “Database Utility” window opens.
This section describes the procedure for deleting the local image, discarding the image database, and creating a new one.
NOTES Database can be initialized only when SQL Server has been running. If SQL Server is not running, restart the PC. If images are left on the image output queue, it is not possible to initialize the database. Initialize the image database after verifying that the images are fully output from the output queue. For the procedure for deleting images from the image output queue, see “7.1.2 Initializing the Output Queue.”
1.
Start the Service Utility. ➔ The “Service Utility top” window opens.
MU000033.ai
3.
Click [Image database is initialized.]. ➔ The “Console warning” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-96
MU-97 4.
Click [OK].
NOTE
➔ The command prompt window for an initialization process opens.
If the following message appears, it means that the images contained in the image database are not initialized. It failed in initialized DB. Verify that the SQL Server is running and that no image is left on the image output queue. To restart the SQL Server I. Restart the PC.
MU000011.EPS
II. Select “Control Panel” from the Tool”.
➔ Wait until the message “Press any key to continue...” appears.
menu and double-click “Administrative
III. Double-click “Computer Management”. IV. Select “Computer Management” - “Services and Applications” - “SQL Server Configuration Manager” - “SQL Server 2005 Services”. V. Confirm that SQL Server(MSSQLSERVER) is “running”. If images are left on the image output queue ➔ Deletes the images from the image output queue. For the procedure for deleting images from the image output queue, see “7.1.2 Initializing the Output Queue.”
MU000013.EPS
5.
Press any key on the keyboard. ➔ The “Console verification” window opens.
6.
Click [OK]. ➔ The system returns to the “Database Utility” window.
7.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-97
MU-98 4.
7.1.4 Initializing the Preset DB
➔ The command prompt window for an initialization process opens.
This section describes the procedure for discarding the current preset database and creating a new one.
1.
➔ Wait until the message “Press any key to continue...” appears.
5.
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [OK].
Press any key on the keyboard. ➔ The “Console verification” window opens.
6.
Click [Database Utility]. ➔ The “Database Utility” window opens.
Click [OK]. ➔ The system returns to the “Database Utility” window.
7.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
MU000033.ai
3.
Click [Initialized Preset DB.]. ➔ The “Console warning” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-98
MU-99 7.2 Acquiring EDR Backup Data This section describes the procedure for acquiring/storing the EDR backup data file for a selected local image. The EDR backup data is used, for instance, to analyze image processing abnormalities and other troubles.
1.
Start the Service Utility.
3.
Select one or more pieces of EDR data.
● Selecting only one piece of EDR data I.
Click an EDR data item. ➔ The selected item is then highlighted.
● Selecting two or more consecutive pieces of EDR data (selecting all pieces of data between A and B in the window shown below)
EDR data is not displayed at the time of installation. It appears in a list after an image is transferred to the CR-IR 391CL.
MU000027.EPS
I.
Click the first item of the consecutive data items (the “FCRImageID: A001” data in the window shown above). ➔ The selected item is then highlighted.
II. Hold down the key and click the last item of the consecutive items (the “FCRImageID: A003” data in the window shown above). ➔ All items between the first and the last are then highlighted.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-99
MU-100 ● Selecting two or more nonconsecutive pieces of EDR data
5.
Select a save destination directory and then click [OK].
➥ REFERENCE If drive a: is selected, a message appears prompting you to insert an FD into its drive.
I. II. III.
6.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
MU000057.EPS
I.
Click the first item (click “FCRImageID: A001” in the window shown above). ➔ The selected item is then highlighted.
II. Hold down the key and click the second item (click “FCRImageID: A002” in the window shown above). ➔ The second item is then additionally highlighted. III. Hold down the key and click the next item (click “FCRImageID: A003” in the window shown above). ➔ The third item is then additionally highlighted. IV. Select the other items as needed by repeating step III.
➥ REFERENCE Even if the selected items are hidden due to scrolling, they remain selected.
4.
Click [Save the EDR function]. ➔ A window opens, prompting you to specify the save destination.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-100
MU-101 7.3 Connection Check
● Checking the connection to a DICOM device
NOTE
This section describes the procedure for checking the connection to the equipment that is defined through “Connected equipment” under “Service settings.” The connection check procedure varies depending on whether the connection to a host device or DICOM device is to be checked.
1.
When checking the connection between DICOM devices, it is necessary to the “Verification” service class be supported by both the local device and the other device. For details on the setup procedure, see “6.2.3 DICOM Settings.”
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
I.
Click [Connection check]. ➔ The “Connection check” window opens.
3.
Check the connection to host equipment or DICOM device.
II. Click [Verify connection]. ➔ When the message “DICOM Verification was succeeded.” appears in the “FFServiceUtility” window, the connection is normal.
● Check connection to the host equipment I.
Click the downward arrow mark ( ) for “RU0” under “Check connection to the host equipment” to open the pull-down menu. Select host equipment that is registered as “Connected equipment.” ➔ A host name appears. If no host name is assigned, an IP address appears.
NOTE If the message “DICOM Verification was failed.” appears, use the Simplified setup wizard to check the associated setting. See the Service Manual for the connected equipment, and ensure that the DICOM communication is properly established.
II. Click [Verify connection]. ➔ The command prompt window opens. When the command prompt window displays the following message four times, the connection is normal. Reply from 172.16.1.10: bytes=32 time<10ms TTL=128
➥ REFERENCE The displayed values “time<10ms” and “TTL=128”, which are included in the above message, vary with the network condition. However, the connection is normal no matter what values are displayed.
Click the downward arrow mark ( ) for under “DICOM Verification” to open the pull-down menu. Select a DICOM device that is registered as “Connected equipment.” ➔ Registered DICOM devices whose “Verification setting” is ON are then displayed. The Verification setting is defined through “DICOM setting” under “Service settings.”
III. Close the dialog box. ➔ The system returns to the “Connection check” window.
4.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
NOTE If the message “Request timed out.” appears, use the Simplified setup wizard to check the associated setting. Further, check the power supplies and connections for network devices (LAN cables, hub, etc.) to ensure that the communication with the connected equipment is normally established. III. Close the command prompt window by clicking its mark. ➔ The system returns to the “Connection check” window. 020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-101
MU-102 4.
7.4 Log Display/Edit
➔ A confirmation window opens.
This section describes the procedure for displaying/clearing the number of IP exposures (IP exposure count).
1.
Click [Delete].
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Log display/edit]. ➔ The “Editing/displaying logs” window opens.
3.
Select an IP whose exposure count is to be cleared.
NOTE Before clearing the exposure count (the number of exposures), be sure to check that its history is saved.
MU000058.EPS
5.
Click [OK]. ➔ The selected IP is then deleted from the list.
MU000056.ai MU000026.EPS
6.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-102
MU-103 7.5 Event Log Display This section describes the procedure for starting Windows Vista’s Event Viewer for trouble analysis purposes.
1.
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Event log display]. ➔ Windows Vista’s Event Viewer starts.
3.
Check the event log. For the configuration of the Event Viewer window and the information on how to view the Event Viewer window, see “2.3 Configuration and How to View the Event Viewer” under “MT: Machine Troubleshooting.”
4.
Exit the Event Viewer by clicking the main window.
020-221-02E 01.08.2010 FM5563
mark on the Event Viewer
CR-IR 391CL Service Manual
MU-103
MU-104 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-104
MU-105 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-105
MU-106 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
MU-106
Appx MU 1-1
Appendix 1 Backup Utility Use the Backup Utility to back up patient information, setup information, and log information.
■ Removing the disk Remove the storage disk as directed below.
1.
Click
in the upper right corner of the “Study List” window.
■ Preparations Make sure that all images are written on a storage disk. Attach a label to the case of a backup disk, write a date on the label, and mark it as a “Backup” disk.
IN000512.ai
➔ The Indicator window (disk) opens.
Determine the version of the application, and write the version on the label attached to the “Backup” disk case.
IN000620.ai
2.
Click [Eject]. ➔ The DVD drive tray opens.
3.
Remove the disk. Insert it into the case with the front surface facing upward.
NOTE Attach a label to the case, mark it as a “Storage disk”, and write the date on the label.
4. 020-221-01E 04.28.2009 FM5535
Close the empty tray.
CR-IR 391CL Service Manual
Appx MU 1-1
Appx MU 1-2 5.
7.
Click [Update]. ➔ Only “Device Name” is displayed. “Status”, “Usage”, and “Disk Writing” are hidden.
Click [Close] in the upper left corner of the “Study List” window.
➥ REFERENCE For V1.1(B) or later, click
at the bottom of the Main Window.
IN000633.ai
➔ The “[20339] Application will be terminated” dialog box opens.
MUApp0002.ai
6.
Click [OK]. ➔ The system returns to the “Study List” window. IN000625.ai
8.
Click [OK]. ➔ The system returns to the desktop screen.
IN00062 .ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MU 1-2
Appx MU 1-3 ■ Backup
● Starting the Backup Utility
1.
● Preparations ❍ When the CR-IR 391CL is not running:
1.
In the desktop screen, double-click
.
IN000402.ai
➔ The right-click menu opens.
➔ The CR-IR 391CL starts and then the user selection window opens.
2.
Right-click the CR-IR 391CL server icon in the task tray, which is located in the lower right corner of the desktop screen.
Click [Finish] in the lower left corner of the user selection window.
2.
Click [Backup Utility]. ➔ A confirmation window opens.
❍ When the CR-IR 391CL is running:
1.
Click [Close] in the upper left corner of the “Study List” window.
➥ REFERENCE For V1.1(B) or later, click
at the bottom of the Main Window.
MU000034.ai
3.
IN000633.ai
Click [OK]. ➔ After the system is shut down, the “User authentication” window opens.
➔ A confirmation dialog box opens.
IN000635.ai
IN000625 ai
2.
Click [OK]. ➔ The client application exits.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MU 1-3
Appx MU 1-4 4.
From the keyboard, enter the username “medicalservice” and the password “fieldengineer.”
6.
Click [Backup]. ➔ The “Backup” window opens.
NOTES The username and password both consist of 1-byte lower-case characters only. Do not include any space. Since the “medicalservice” user is not registered in the pull-down menu, be sure to enter the username from the keyboard.
IN000626.ai
7.
MU000035.ai
5.
Put a checkmark on each of the following items (by changing
Click [OK]. ➔ The “Main Menu” window opens.
8.
➔
Patient information Setup information Log information Delete logs after completing backup processing.
Click [Start]. ➔ The “Select folder” window opens.
9.
Open the DVD drive tray, and insert the backup disk into the tray.
MU000036.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 1-4
):
Appx MU 1-5 10. Complete the following checks and then click [OK].
11. Click [OK]. ➔ The disk formatting confirmation window opens.
IN000627.ai
I.
Check that the current drive is D:. Also, check that the folder name represents the execution date and time (YYYYMMDDhhmmss).
➔ The log information deletion confirmation window opens.
MUApp0004.ai
NOTE If you insert a formatted disk in this step, the above disk formatting confirmation window does not open; however, the following message appears. Click [OK] in response to the message because the backup process remains unaffected.
MUApp0003.ai
MU000040.EPS
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 1-5
Appx MU 1-6 12. Click [OK].
● Post-backup confirmation
➔ The backup destination folder creation confirmation window opens.
1.
Select “Computer” from the
menu and double-click “DVD drive
(D:). And then check to make certain that the files shown on the following screen shot are stored.
IN000628.EPS
13. Click [OK]. ➔ Upon completion of backup processing, the completion window opens.
IN000629.ai
MU000042.ai
14. Click [OK].
2.
Remove the backup disk from the DVD drive, and then insert the storage disk.
3.
In the “Select Server Application Behavior” window, select “Start up Client Application” and click [OK].
➔ The system returns to the “Main Menu” window.
15. Click [Finish]. ➔ The system returns to the desktop window.
IN000636.ai
➔ The log-in window opens. 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 1-6
Appx MU 1-7 4.
8.
Log in as “Service Engineer.”
Verify that no error information is recorded as an event.
For the procedure for logging in as “Service Engineer”, see “5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD” under “IN: Installation.”
➥ REFERENCE For V1.1(B) or later.
MUApp0021.ai
➔ The “Study List” window opens. IN000631.ai
5. 6.
Click
under the
9.
.
Click [OK]. ➔ The system returns to the “Study List” window.
Verify that the list on the storage disk is displayed.
10. Click [Close] in the upper left corner of the “Study List” window. ➔ The “[20339] Application will be terminated” dialog box opens.
IN000630.ai
IN000625.ai
7.
Click
in the indicator section.
➔ The “Indicator” window opens.
020-221-02E 01.08.2010 FM5563
11. Click [OK]. ➔ The system returns to the desktop screen.
CR-IR 391CL Service Manual
Appx MU 1-7
Appx MU 1-8 4.
■ Restore (information restoration)
1.
Insert the backup disk into the DVD drive.
2.
In the Main Menu window, click [Restore].
Specify the data folder on the backup disk that is to be restored, and then click [OK].
For the procedure for starting the Backup Utility, see “● Starting the Backup Utility.”
MUApp0008.EPS
➔ The system returns to the “Select folder” window.
5.
Verify that the folder specified in Step 4 is displayed, and then click [OK].
MU000036.ai
➔ The “Select folder” window opens.
MUApp0009.EPS
➔ The “Restore” window opens. MUApp0006.EPS
3.
Click [Browse]. ➔ The “Browse For Folder” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 1-8
Appx MU 1-9 6.
From “Select Information to be restored”, select “Menu Setting Information”, “System configuration information”, “User information”, and “Explanatory information.”
7.
Click [Start]. ➔ Upon completion of restore, the “Confirmation” window opens.
MUApp0011.EPS
NOTE To restore “IP use count data” I. Put a checkmark in the “IP counter information” check box (by changing ). ➔ II. Click [Start]. ➔ The “[64402] IP use count data will be restored” window opens.
MU000045.EPS
MC000215.EPS
III. Click [OK]. ➔ The restore completion window opens.
8.
Click [OK]. ➔ The system returns to the “Main Menu” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 1-9
Appx MU 1-10 9.
Click [Finish]. ➔ The system returns to the desktop screen.
■ Collecting logs for maintenance purpose The procedure for collecting analysis logs is described below.
10. Verify the system configuration information. For the procedure for verifying the system configuration information, see “5. Checkup Work” under “IN: Installation.”
11. Verify the user information and explanatory information. For the procedure for verifying the user information and explanatory information, see “Appendix 3: Creating a User.”
NOTE The information specific to the user environment must be verified in the presence of the user.
CAUTION When acquiring or taking out personal information, observe the sales representative’s rules that are based on the local laws and regulations. When collecting logs, it is recommended that you use, for instance, a USB memory having an adequate security function, and exercise due care in handling it.
1.
In the Main Menu window, click [Collecting logs for maintenance purpose]. For the procedure for starting the Backup Utility, see “● Starting the Backup Utility.”
MU000036.ai
➔ The “Collecting Logs for Maintenance Purpose” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 1-10
Appx MU 1-11 2.
Put a checkmark in the “Delete personal information off of the logs” or “Do not delete personal information off of the logs” check box, and then click [Start].
3.
Click [Browse].
NOTE When collecting maintenance logs without deleting the personal information, observe the instructions set forth under “CAUTION” at the beginning of “ ■ Collecting logs for maintenance purpose.”
MUApp0020p.EPS
➔ The “Browse For Folder” window opens.
4.
Specify the folder for analysis log storage, and then click [OK].
MUApp0013.EPS
➔ The system returns to the “Select folder” window. MUApp0019.EPS
➔ The “Select folder” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 1-11
Appx MU 1-12 5.
Verify that the folder specified in Step 4 is displayed, and then click [OK].
8.
Verify that “BackupInfo.ini” and “MAINTENANCE.cab” are created in the folder specified in Step 4.
MUApp0016.EPS
9. MUApp0014.EPS
Check to see that the “Study.txt” file is created on the desktop.
➤ IMPORTANT Show “Study.txt” to the user to give evidence of the fact that the personal information was deleted certainly. After showing “Study.txt” to the user, delete it unfailingly.
➔ The “Confirmation” window opens.
MUApp0017.EPS
6.
Click [OK]. ➔ The system returns to the “Main Menu” window.
7.
Click [Finish]. ➔ The system returns to the desktop screen.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 1-12
Appx MU 2-1
Appendix 2 User Utility
■ Setting a destination for automatic image output NOTE
■ Preparations
Before performing the procedure set forth below, complete network information setup.
● When the CR-IR 391CL is not running:
1.
In the desktop screen, double-click
.
➔ The CR-IR 391CL starts and then the user selection window opens.
2.
Click [Finish] in the lower left corner of the user selection window.
● When the CR-IR 391CL is running:
1.
Click [Close] in the upper left corner of the “Study List” window.
Use the automatic output destination setup function to select non-default settings for image output to output devices at the time of an image read from the RU device. For the DVD, which is a standard component, the automatic output function is enabled for image backup purposes. For the optional DICOM printer and generalpurpose files, however, the automatic output function is disabled by the default. Therefore, when an output is to be automatically delivered to the above optional output destinations, be sure to complete the setup procedure described below.
1.
Right-click the CR-IR 391CL server icon in the task tray, which is located in the lower right corner of the desktop screen.
➔ A confirmation dialog box opens. IN000402.ai
➔ The right-click menu opens.
2.
Click [User Utility]. ➔ A confirmation window opens.
IN000625 ai
2.
Click [OK]. ➔ The “Select Server Application Behavior” window opens.
3.
Select “Exit” and Click [OK]. ➔ The client application exits.
020-221-02E 01.08.2010 FM5563
INApp0007.EPS
CR-IR 391CL Service Manual
Appx MU 2-1
Appx MU 2-2 3.
5.
Click [OK]. ➔ After the system is shut down, the “User authentication” window opens.
Click [OK]. ➔ The “Main Menu” window opens.
IN000635.ai
4.
From the keyboard, enter the username “medicalservice” and the password “fieldengineer.”
NOTES The username and password both consist of 1-byte lower-case characters only. Do not include any space. Since the “medicalservice” user is not registered in the pull-down menu, be sure to enter the username from the keyboard.
INApp0008.ai
MU000035.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 2-2
Appx MU 2-3 6.
11. Click [OK].
Click [Output Destination Settings]. ➔ The “Setting destination for image output” window opens.
➔ The system returns to the “Main Menu” window.
12. Click [Finish]. ➔ The “Application is now being activated.” window opens.
INAppM0001.EPS INApp0009.ai
➔ The system starts up and then the “User selection” window opens.
➥ REFERENCES “Printer” is displayed only when the “DICOM print” option is installed. “DICOM transmission” is displayed only when the “Storage in a DICOM storage device” option is installed.
NOTE For a “General-purpose file”, set up the “Naming rule of general-purpose image files.” See “ ■ Setting the naming rule of general-purpose image files.”
7.
Click an output destination tab for automatic output.
8.
Put a checkmark in the “Automatic image output” check box (by changing to ).
9.
Set the “Destination for data transfer” and “Timing of output.”
10. When setting another output destination, repeat Steps 7 to 9. 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 2-3
Appx MU 2-4 ■ Setting the naming rule of general-purpose image files
1.
Open the “Setting destination for image output” window.
2.
Click to open the “General-Purpose File” tab.
■ Automatic verification of a study The CR-IR 391CL involves the use of a “Confirmation” procedure, which is performed by the user to confirm an image read from the RU device, and a “Verification” procedure that is performed to finish a study. The automatic verification procedure set forth below is used to either confirm a study the moment it is verified by the user or automatically verify a study when a preselected period of time elapses after confirmation. When the above automatic verification function is used in conjunction with the automatic image output destination setup function, it is possible to generate an output on the basis of automatic verification.
1.
Right-click the CR-IR 391CL server icon in the task tray, which is located in the lower right corner of the desktop screen.
IN000402.ai
➔ The right-click menu opens. INApp0010.ai
3. 4.
Click the downward arrow mark (
) for “Type1.”
2.
Click [User Utility]. ➔ A confirmation window opens.
Click [OK]. ➔ After the system is shut down, the “User authentication” window opens.
Click [OK]. ➔ The “Main Menu” window opens.
IN000635.ai
4.
From the keyboard, enter the username “medicalservice” and the password “fieldengineer.”
NOTES The username and password both consist of 1-byte lower-case characters only. Do not include any space. Since the “medicalservice” user is not registered in the pull-down menu, be sure to enter the username from the keyboard.
INApp0008.ai
6.
Click [Auto-Determine Settings]. ➔ The “Automatic verification of a study” window opens.
MU000035.ai
MUApp0001.EPS
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 2-5
Appx MU 2-6 7.
Put a checkmark in the “Automatically verifying a study” check box (by changing to ).
8.
Choose either “Completion of an exposure and its verification take place simultaneously.” or “Study is verified after the set time followed by exposure.”
9.
Specify the “Time required for automatic verification of a study” by clicking the or by entering a desired value from the keyboard.
10. Click [OK]. ➔ The system returns to the “Main Menu” window.
11. Click [Finish]. ➔ The system returns to the desktop screen.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 2-6
Appx MU 2-7 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 2-7
Appx MU 2-8 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 2-8
Appx MU 3-1
Appendix 3 Creating a User
NOTE The top, bottom, left, and right edge portion clicks should be done slowly. Too fast clicking may prevent the detection of correct position information.
This section shows the procedures of creating a user to perform a check on image input/output, after completion of installation.
3. 1.
Double-click
on the desktop screen.
Enter the password “fieldengineer” (using only single-byte lower-case letters), and click [Login].
➔ The CR-IR 391CL server application starts up and the initial window opens. When the server application has started up, the CR-IR 391CL server icon appears in the task tray in the bottom-right of the desktop screen.
IN000402.ai
➔ Internet Explorer opens, and the “User Selection” window opens.
2.
Click the top, bottom, left, and then right edge portions of the “Select a User.” window in order.
IN000502.ai
➔ The “Study List” window opens.
IN000501.ai
➔ The “Password input” window for the password of the service engineer opens. 020-221-02E 01.08.2010 FM5563
Click [User Info Maintenance]. ➔ The “User Info Maintenance” (1) window opens.
IN000519.EPS
IN000517.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MU 3-2
Appx MU 3-3 7.
14. Checkmark “Automatically verify user.” (
Click [Newly registered patient]. ➔ The “User Info Maintenance” (2) window opens.
➔
).
NOTE Although you specify the user as an “Automatically verify user.” for the purpose of performing verification of the Automatic Output setting in the procedure described in this section, be sure to remove this checkmark after completion of the checkup work because the “Automatically verify user.” cannot be removed. For details on the “Automatically verify user.”, see the CR-IR 391CL Operation Manual.
15. Click [Register]. ➔ The system returns to the “User Info Maintenance” (1) window.
16. Click [Close]. ➔ The system returns to the “User Settings (for Administrator)” window.
17. Click [Close].
IN000520.EPS
➔ The system returns to the “Main menu” window.
8.
Enter an account name.
9.
Enter “User Name” - “For Image Display” (up to 20 characters).
18. Click [Close]. ➔ The system returns to the “Study List” window.
10. Enter “User Name” - “For Data Storage” (up to 64 characters).
NOTE Entry in the Comment and Image sections in the window are optional.
11. Under “Authority,” click [Down] and select “Group 3.”
For more information, see the Operation Manual.
12. Do not enter anything in “New password” and “Confirm” and leave them blank.
13. Remove the checkmark from “Automatically login user.” (
020-221-01E 04.28.2009 FM5535
➔
).
CR-IR 391CL Service Manual
Appx MU 3-3
Appx MU 3-4 2.
■ Verifying the created user
1.
Click [OK]. ➔ The “Select a User.” window opens.
In the CR-IR 391CL client, click [Log Off].
● V5.0 or before
IN000408.EPS
● V1.1(B) or later
IN000528.ai
IN000525.EPS
➔ The confirmation dialog box opens.
3.
Make sure that the user you have created is being displayed.
IN000524.EPS
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MU 3-4
Appx MU 3-5 4.
In the “Select a User.” window, click the user you have registered. ➔ The “Password input” window opens.
IN000526.EPS
5.
Enter the password, and click [Login]. ➔ The “Study List” window opens.
6.
Check to see that the “Study List” window opens, and then click [Changing users] to log off the system.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 3-5
Appx MU 3-6 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 3-6
Appx MU 3-7 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 3-7
Appx MU 3-8 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 3-8
Appx MU 4-1
Appendix 4 Settings for Automatic Output To change the Automatic Output settings from their default values to some other values, follow the procedure described in this appendix.
NOTE
■ Preparatory work ● If the CR-IR 391CL has not been started:
1.
When changing any of the Automatic Output settings, obtain a confirmation from the user.
Double-click the
icon on the desktop screen.
➔ The CR-IR 391CL starts up, and then the “Select a User.” window opens.
2.
Click [Finish] in the bottom-left corner of the “Select a User.” window that opens.
● If the CR-IR 391CL is up and running:
1.
Click [Close] in the upper-left corner of the “Study List” window.
➥ REFERENCE For V1.1(B) or later, click
at the bottom of the Main Window.
IN000633.ai
➔ The confirmation dialog opens.
IN000625.ai
2.
Click [OK]. ➔ The client application exits.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MU 4-1
Appx MU 4-2 ■ Starting the User Utility and making necessary settings
1.
4.
Right-click the CR-IR 391CL server icon in the task tray in the bottomright corner of the desktop screen.
NOTES The username and the password both must consist of single-byte lower-case letters only. They must not contain any space characters. The username “medicalservice” must always be typed in from the keyboard because that user is not added in the pull-down menu.
IN000402.ai
➔ Its right-click menu opens.
2.
Enter the username “medicalservice” and the password “fieldengineer” from the keyboard.
Click [User Utility]. ➔ The confirmation window opens.
MU000035.ai
5. INApp0007.EPS
3.
Click [OK]. ➔ The “Main Menu” window opens.
Click [OK]. ➔ After the system terminates, the “User Authentication - User Utility” window opens.
IN000635.ai
INApp0008.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MU 4-2
Appx MU 4-3 6.
9.
Click [Output Destination Settings].
Specify the “Timing of output.” ● “Upon verification of a study” : At the instant when the [Verify] button is clicked.
➔ The “Setting destination for image output” window opens.
● “Upon completion of an exposure” : At the instant when the [Confirm] button is clicked, or at the time of switching over to the viewer window. In the case of outputting to the DVD and DICOM Transmission, the default is “Upon verification of a study.” “Upon completion of an exposure” cannot be selected. In the case of outputting on a printer, the default is “Upon completion of an exposure.” Either “Upon verification of a study”/“Upon completion of an exposure” can be selected.
10. Click [OK]. ➔ The “Main Menu” window opens.
11. For “General-purpose file,” repeat Steps 6 to 9. INApp0009.ai
12. Click [Finish].
➥ REFERENCES The [Printer] tab is not displayed if the “DICOM print” option has not been installed.
➔ A window opens to indicate that the system is in startup process.
The [DICOM transmission] tab is not displayed if the “DICOM transmission” option has not installed.
NOTE As for general-purpose files, specify the “Naming rule of general-purpose image files” here. see “ ■ Setting the naming rule of general-purpose image files” later in this appendix.
7.
Checkmark “Automatic image output” (
8.
Check to see that the “Destination for data transfer” field shows the device name you have specified using the Service Utility.
020-221-01E 04.28.2009 FM5535
➔
).
INAppM0001.EPS
➔ The system starts up, and the “Select a User.” window opens.
CR-IR 391CL Service Manual
Appx MU 4-3
Appx MU 4-4 ■ Setting the naming rule of general-purpose image files
1.
Open the “Setting destination for image output” window.
Appendix 5 Setup for Auto-verify This section shows the procedures of making the following setting in order that a study for which exposure has been completed will be automatically verified. With this Auto-verify feature, outputting of images without user intervention to output destination equipment whose Automatic Output setting is enabled becomes possible. See “Appendix 4: Settings for Automatic Output” in “MU: Maintenance Utility.”
■ Preparatory work
■ Starting the User Utility and making necessary settings
1.
Right-click the CR-IR 391CL server icon in the task tray in the bottomright corner of the desktop screen.
IN000402.ai
➔ Its right-click menu opens.
2.
Click [User Utility]. ➔ The confirmation window opens.
● If the CR-IR 391CL has not been started:
1.
Double-click the
icon on the desktop screen.
➔ The CR-IR 391CL starts up, and then the “User Selection” window opens.
2.
Click [Finish] in the bottom-left corner of the “User Selection” window.
● If the CR-IR 391CL is up and running:
1.
Click [Close] in the upper-left corner of the Study List window. ➔ The confirmation dialog opens.
INApp0007.EPS
3.
Click [OK]. ➔ After the system terminates, the “User Authentication - User Utility” window opens.
IN000625 ai
2.
Click [OK]. IN000635.ai
➔ The “Select Server Application Behavior” window opens.
3.
Select “Exit” and Click [OK]. ➔ The client application exits.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx MU 5-1
Appx MU 5-2 4.
Enter the username “medicalservice” and the password “fieldengineer” from the keyboard.
6.
Click [Auto-Determine Settings]. ➔ The “Automatic verification of a study” window opens.
NOTES The username and the password both must consist of single-byte lower-case letters only. They must not contain any space characters. The username “medicalservice” must always be typed in from the keyboard because that user is not added in the pull-down menu.
INAppN0001.EPS MU000035.ai
5.
7.
Click [OK].
Checkmark “Automatically verifying a study” (
➔
).
➔ The “Main menu” window opens.
INAppN0002.EPS
INApp0008.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 5-2
Appx MU 5-3 8.
Auto-verify options become selectable. Checkmark the option to use, and click [OK]. A study is automatically verified at the time of completion of its exposure operation (or at the “Completion of an exposure and its time of opening the viewer). verification take place simultaneously.” The time until automatic verification can be set with “Time required for automatic verification of a study”. “Study is verified after the set time followed by exposure.”
Selecting this option turns the “Time required for automatic verification of a study” field active so that you can set a value. The length of time until Auto-verify can be set in minutes (within a range from 5 to 720 minutes). The default is 30 min.
9.
Click [OK]. ➔ The system returns to the “Main Menu” window.
10. Click [Finish]. ➔ A window opens to indicate that the system is in startup process.
INAppM0001.EPS
➔ The system starts up, and the “Select a User.” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 5-3
Appx MU 5-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 5-4
Appx MU 6-1
Appendix 6 DICOM Tag Mapping Function
■ TagReplace.ini file format ; Tag setup file ; [DICOM] ; ; 00080090=MOV-T-L,00092F90 00181400=CPY-T,00192F30 00192f90=DEL ; 00192F30=SET,“SKULL,GENERAL”
When generating image outputs using the DICOM CR STORAGE function, you can edit (copy, move, delete, or initialize) the tag information (image information). To edit the tag information, open the setup file (TagReplace.ini) and write desired data in the file. The procedure is described below:
NOTE Do not use the TagReplace.ini file, which is used by any other equipment (such as the QA-WS), for the CR-IR 391CL. Due to different file storage format adopted, an error will result.
I. Comment II. Section name (protocol name) III. Editing destination tag IV. Command
V. Initial value FR000001.EPS
1.
Select “Run...” from the Start menu. ➔ The “Run...” window opens.
2.
Input “C:\ProgramData\Fujifilm\Hobbit\Config” and click [OK]. ➔ The “Config” folder opens.
3.
Open the TagReplace.ini file with Notepad (Notepad.exe).
NOTE By default, “[DICOM]” is described in the TagReplace.ini file. Do not delete this description,otherwise the CR-IR 391CL will not be started.
4.
I. II. III. IV. V.
Comment Lines beginning with a semicolon (;) are handled as a comment. Section name (protocol name) As the section name, the protocol name targeted for tag information editing must be written within square brackets ([ ]). Only DICOM is supported. Editing destination tag Write the group number/element number of the editing destination tag information (enter a string of eight characters at all times). Command Write a tag information editing command. See the table that is presented later. Initial value Write a character string in VR-compliant format to specify the initial value for a tag information element.
Write desired tag information in the file in accordance with the format described later.
REFERENCE As the editing target tag VR, only “character strings” are supported. If a tag VR entry in the setup file is not a character string, an error dialog box opens at CR-IR 391CL startup.
5.
Save the TagReplace.ini file in UNICODE format and then close Notepad (Notepad.exe).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 6-1
Appx MU 6-2 NOTES
The following commands are available: Command
Description Process Copies an element from another tag. Format
CPY
Editing-destination-tag=CPY[-T],editing-source-tag -T : Performs an element copy operation after deleting spaces from the beginning and end of the source tag element. If, for instance, the source tag = “∆∆AB∆C∆”, the command copies “AB∆C” (∆ : space).
Process Moves an element from another tag. Format
MOV
Editing-destination-tag=MOV[-T][-L],source-tag -L : Performs a move operation after setting the source tag element length to zero. -T : Performs an element move operation after deleting spaces from the beginning and end of the source tag element. If, for instance, the source tag = “∆AB∆C∆”, the command moves “AB∆C” (∆ : space).
When writing the TagReplace.ini file, set data in compliance with DICOM VR. Also, exercise care to avoid internal data inconsistency. Even if the editing destination tag differs from the source tag in VR, the editing process is performed as far as they are both in character string form. Note, however, that even if the character string length is over the limit specified by the editing destination tag VR, the tag information is set as is without being checked. The editing process will not be performed if the associated tag or element and initial value do not exist on the source side. For the detailed information about Fuji’s Private tags, see “DICOM Conformance Statement”.
Process Deletes an element.
DEL SET
020-221-01E 04.28.2009 FM5535
Format
Editing-destination-tag=DEL[-L] -L : Sets the element length of the editing destination tag to zero.
Process Sets a fixed initial value for the element. Format
Editing-destination-tag=SET, “initial-value”
CR-IR 391CL Service Manual
Appx MU 6-2
Appx MU 6-3 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 6-3
Appx MU 6-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 6-4
Appx MU 7-1
Appendix 7 Free Drawing Function Settings The setting procedure for the free drawing function and setting file backup/restore is explained. The following settings can be changed. Pen size (3 types: narrow pen, medium pen, thick pen) Snapshot saving path Initial display screen at the time of start of the free drawing window (only for a dual-monitor configuration)
Procedure for changing the settings Open the file “C:\Program Files\FujiFilm\Hobbit\System\FDDSettingInfo.ini” with Notepad and change the set values manually.
Snapshot saving path Change the path (= right side) of the following command in the [TEMP] section. tempSavePath = “Snapshot saving path” Enclose the specified path in double quotation marks (“). Example: tempSavePath = “C:\Temp”
REFERENCE The default set value is “C:\Users\fujicr\AppData\Local\Temp\FDD.” tempSavePath = %TEMP%
Initial display screen at the time of start of the free drawing window This setting decides the monitor screen on which the free drawing window starts in an environment with a two-monitor configuration. Change the value (= right side) of the following command in the [FUNCTION] section.
REFERENCE
displayPosition = (“0” or “1”)
The set values can be changed for server and clients.
Enter “0” for display on the primary monitor and “1” for display on the secondary monitor.
Pen size Three types (narrow pen, medium pen, thick pen) can be used for the free drawing pen size. Change the value (= right side) of the following commands in the [PENSIZE] section. PENSIZE1 (narrow pen) = (points) PENSIZE2 (medium pen) = (points) PENSIZE3 (thick pen) = (points)
REFERENCE The default set value is “0” (primary monitor). displayPosition = 0
Setting file backup and restore When reinstalling the server application/client application at the time of a version update etc., back up the following file before uninstalling the server application/ client application.
The default set values are narrow pen = 3 pt, medium pen = 9 pt, and thick pen = 27 pt.
NOTE
PENSIZE1 = 3 PENSIZE2 = 9 PENSIZE3 = 27
“FDDSettingInfo.ini” is the setting file for the free drawing function. In an environment with a dual-monitor configuration, it is possible that this setting file has been edited. After reinstallation of the server application/client application, use the backed-up “FDDSettingInfo.ini” to overwrite.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 7-1
Appx MU 7-2 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 7-2
Appx MU 7-3 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 7-3
Appx MU 7-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx MU 7-4
SP-I
CR-IR 391CL Service Manual
SP: Service Parts
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
SP-I
SP-II
SP: Service Parts
Control Sheet Issue date
Revision number
04/28/2009
01
020-221-01E 04.28.2009 FM5535
Reason New release (FM5535)
Pages affected All pages
CR-IR 391CL Service Manual
SP-II
SP-1
1. Service Parts List 1.1 How to Use Service Parts List RANK Parts handling ID symbols used to identify the parts requiring special operation The ID symbols are assigned to applicable parts. Parts without the R mark are replaced and handled in a regular manner. Symbol R Q, T
Description
+
PART NUMBER
A code number that is unique to each part. The rightmost letter of the code number has the following meaning.
For hardware The letter denotes the version number of a part. If parts have different version numbers, they are upward-compatible.
Symbol for use other than in Japan
PART NAME
This represents the general name of a part.
QTY.
Description Parts subject to Export regulations
Fault rankings used for estimating the recommended stock quantity All parts are assigned a symbol letter from A to E. Symbol
A number for indicating each part in the Service Parts Exploded Views.
For software The letter denotes the software specifications.
Repairable parts
Export regulation mark This + mark is assigned to the parts subject to Export regulations. Parts without the + mark are not subject to Export regulations. Symbol
REF. NO.
Description
A
Consumable parts or parts that will be replaced at short intervals
B
Parts that may become faulty accidentally and have a relatively high failure rate
C
Parts that have a sufficiently long MTBF, but are expected to have a high failure rate
D
Parts that have a sufficiently long MTBF, but are expected to become faulty
E
Parts that are necessary for fault analysis or parts that may be needed in case of faults such as man-induced damage
QTY. represents the quantity of parts used in a unit or assembly.
REMARKS
Unique name of a part or its relevant information or note is described in this column.
SERIAL NUMBER
The units may contain different parts depending on their shipment control number. SERIAL NUMBER indicates the shipment control number to which the parts are applicable. If this column is blank, the parts are applicable to all the relevant units.
RANK column description The symbols for Fault Ranking, Parts Handling, and Export regulation are assigned in order named. Thus, one to three letters are put in the RANK column.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
SP-1
SP-2 Recommended quantities of spare parts It is recommended as a rough guide to hold in stock a specified quantity of parts according to the rank (A to E) assigned to the parts. Parts to be replaced at periodic intervals must be held in stock separately. Adjust the quantity of parts stock depending on the number of working units (N) as prescribed below. Q: Quantity used in a single system N = 1 Rank A = 1 + Q × 0.3 Rank C = 1 + Q × 0.05 Rank D = 1 + Q × 0.02 2 ≤ N ≤ 10 Rank A = 2 + N × Q × 0.3 Rank C = 2 + N × Q × 0.05 Rank D = 1 + N × Q × 0.02 11 ≤ N ≤ 300 Rank A = 3 + N × Q × 0.3 Rank C = 3 + N × Q × 0.05 Rank D = 2 + N × Q × 0.02
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
SP-2
SP-3 1.2 Service Parts List No relevant item.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
SP-3
SP-4 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
SP-4
SP-5 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
SP-5
SP-6 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
SP-6
PM-I
CR-IR 391CL Service Manual
PM: Preventive Maintenance
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-I
PM-II
PM: Preventive Maintenance
Control Sheet Issue date
Revision number
04/28/2009
01
020-221-01E 04.28.2009 FM5535
Reason New release (FM5535)
Pages affected All pages
CR-IR 391CL Service Manual
PM-II
PM-1
1. Preventive Maintenance Items While the CR-IR 391CL is being used, maintenance of the items listed in the table on the right should be performed periodically while observing the warnings and cautions set forth below.
WARNING To avoid electrical shock, turn OFF the equipment power before performing maintenance work.
WARNING/CAUTION Observe the warnings and cautions set forth in the chapter titled “Safety Precautions.”
CAUTION When servicing the inside of the PC, be sure to wear an antistatic wristband to ground your body. If your body is not grounded, the static buildup on your body may damage electronic parts on the circuit boards.
020-221-01E 04.28.2009 FM5535
■ List of preventive maintenance items Reference section
Maintenance item
Required time
Replacement part
Remarks
2. Checking for a Fatal Error 2.1
Confirming the Event Log
3. Safety 3.1
Service Voltage
3.2
Power Plug/Multi-Outlet Power Strip
4. Hardware Cleaning 4.1
PC Internal Cleaning
4.2
LCD Cleaning
5. Executing the Error Analysis Tool (Dell Diagnostics) 5.1
Conducting the Dell Diagnostics Express Test
6. Functional Checks 6.1
Confirmation of Image Input to Storage onto DVD
6.2
Image Output to Film
[Option]
7. Backup of Settings and Verification of Date and Time 7.1
Backup of Setup Files and Log Files
7.2
Verification of Date and Time
CR-IR 391CL Service Manual
PM-1
PM-2
2. Checking for a Fatal Error
3. Safety
2.1 Confirming the Event Log
3.1 Service Voltage
View the OS event log (application) to check for any fatal error recording. For the procedure for viewing the event log, see “2. Using the Event Viewer” under “MT: Machine Troubleshooting.”
NOTE The CR-IR 391CL system has a backup notification function. By default, this function prompts the user at 7-day intervals to perform periodic backup in preparation for a failure. Therefore, the following message may appear when the application is started during an installation, inspection, or other process:
Verify the service voltage that is available within the institution.
3.2 Power Plug/Multi-Outlet Power Strip WARNING When making resistance measurements, be sure that the power plug is disconnected from an outlet. Measure the resistance values of the power cable and multi-outlet power strip. Terminals
Between L and N
Between L and E
Between N and E
Resistance value
100 kΩ or higher
∞
∞
IN000433.ai
A backup procedure is to be performed at the end of an installation or inspection process. Therefore, even when the above message appears, do not perform the backup procedure immediately. Click [Cancel] and continue to sequentially perform the steps set forth in the service manual. Be sure to acquire a backup log with specified timing because it is necessary, for instance, to store a log of operational checks performed for installation or inspection and delete the event log.
020-221-01E 04.28.2009 FM5535
N
E L
E L N
E
E
N L
N L FRCH616003.ai
CR-IR 391CL Service Manual
PM-2
PM-3
4. Hardware Cleaning [reference]
2.
As shown in the figures, push up the stopper and open the PC housing.
4.1 PC Internal Cleaning Cooling fans (power supply fan, CPU fan, etc.) are mounted in the PC to dissipate generated heat through air convection. If dust is heavily accumulated in the neighborhood of a cooling fan or a vent in the PC housing, the effect of the cooling fan may decrease, thereby adversely affecting the operation of the PC. It is therefore necessary to clean the inside of the PC on a periodic basis. PM000403.EPS
■ Preparations
3.
Disconnect all cables from the PC main body.
PM000404.EPS
With an air blower, clean the heat sink and circuit board section.
■ Cleaning
1.
With a brush attached to a vacuum cleaner, carefully vacuum-clean the slots and other openings in the rear of the PC.
PM000405.EPS
PM000401.EPS
020-221-01E 04.28.2009 FM5535
PM000402.EPS
An intake fan is mounted at the front of the DELL OptiPlex 755. This intake fan directly blows air onto the heat sink that is installed above the CPU. Therefore, apply a vacuum cleaner to the front of the PC body to remove dust from the intake fan, and use an air blower to blow air from the inside of the PC main body to the outside and remove dust from the heat sink.
CR-IR 391CL Service Manual
PM-3
PM-4 4.
If dust is heavily accumulated on the heat sink section, remove the heat sink and clean it.
4.2 LCD Cleaning CAUTION
CAUTION If silicone oil is not on hand, do not remove the heat sink. Silicone oil is applied to the junction between the heat sink and CPU. When the heat sink is removed from the CPU for cleaning purposes, wipe off the silicone oil, clean the heat sink, and then apply new silicone oil.
At the time of periodic maintenance, confirm that the caution label has not come off. If it has come off, attach a new label. Also attach a new label when the monitor with the caution label has been replaced for repair.
1.
● Removing the heat sink
PM000406.EPS
With a “Cleaner Torch”, remove dust from the LCD.
PM000407.EPS
PM000414.EPS
2.
If there is any stubborn dirt on the LCD panel surface, wipe it clean with a cloth (e.g., gauze) well wrung out in water.
CAUTION PM000408.EPS
PM000409.EPS
5.
Mount the heat sink back and then close the PC housing cover.
6.
After completion of cleaning, perform an operational check of the cooling fans as directed under “5. Executing the Failure Analysis Tool (Dell Diagnostics)” (the Express Test includes a cooling fan operational check).
If you vigorously scrub the LCD panel surface, the liquid crystal surface may become damaged. Therefore, do not apply any undue force to the LCD panel surface when you wipe it clean. If the LCD panel surface is heavily soiled and cannot be cleaned with a moistened cloth, clean it with the monitor cleaner kit. The monitor cleaner kit is of a chemical type. Therefore, if the monitor cleaner kit is repeatedly used for cleaning purposes, the LCD panel surface will be adversely affected. When using the monitor cleaner kit, read its instruction manual and exercise utmost care.
NOTE Do not use dehydrated ethanol for cleaning purposes because it adversely affects the LCD’s surface film.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-4
PM-5
5. Executing the Error Analysis Tool (Dell Diagnostics) 5.1 Conducting the Dell Diagnostics Express Test See the following and conduct the test. See “4.8.1 Running the Dell Diagnostics Express Test” under “MT: Machine Troubleshooting.”
6. Functional Checks 6.1 Confirmation of Image Input to Storage onto DVD See the following and perform the specified procedure. See “5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD” under “IN: Installation.”
6.2 Image Output to Film See the following and perform the specified procedure. See “5.4 Checking Output Images (option)” under “IN: Installation.”
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-5
PM-6
7. Backup of Settings and Verification of Date and Time 7.1 Backup of Setup Files and Log Files
2.
➔ The DVD drive tray opens.
3.
Make sure that all images are written on a storage disk. Attach a label to the case of a backup disk, write a date on the label, and mark it as a “Backup” disk.
■ Removing the disk
Remove the disk.
NOTE Attach a label to the case, mark it as a “Image storage disk”, and write the date on the label.
This section describes the procedure for backing up patient information, setup information, and log information.
■ Preparations
Click [Eject].
4.
Close the empty tray.
5.
Click [Update]. ➔ Only “Device Name” is displayed. “Status”, “Usage”, and “Disk Write” are hidden.
Remove the storage disk as directed below.
1.
Click
in the upper right corner of the “Study List” window.
➔ The Indicator window (Disk) opens.
MUApp0002.ai
IN000620.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-6
PM-7 6.
■ Starting the Backup Utility
Click [OK]. ➔ The system returns to the “Study List” window.
1.
Right-click the CR-IR 391CL server icon in the task tray, which is located in the lower right corner of the desktop screen.
IN000402.ai
➔ The right-click menu opens.
2.
Click “Backup Utility”. ➔ A confirmation window opens.
MU000034.ai
IN000624.ai
7.
Click [Close] in the upper left corner of the “Study List” window. ➔ The “[20339] Application will be terminated. +Are you sure?” dialog box opens.
3.
Click [OK]. ➔ After the system is shut down, the “User authentication” window opens.
MU000035.ai IN000625.ai
8.
Click [OK]. ➔ The system returns to the desktop screen.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-7
PM-8 4.
From the keyboard, enter the username “medicalservice” and the password “fieldengineer”.
6.
Click [Backup]. ➔ The “Backup” window opens.
NOTES The username and password both consist of 1-byte lower-case characters only. Do not include any space. Since the “medicalservice” user is not registered in the pull-down menu, be sure to enter the username from the keyboard.
IN000626.ai
7.
MC000098.ai
5.
Click [OK]. ➔ The “Main Menu” window opens.
Put a checkmark on each of the following items (
8.
➔
).
Patient information Setup information Log information Delete logs after completing backup processing
Click [Start]. ➔ The “Select folder” window opens.
9.
Open the DVD drive tray, and insert the backup disk into the tray.
MU000036.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-8
PM-9 10. Complete the following checks and then click [OK].
11. Click [OK]. ➔ The disk formatting confirmation window opens.
I.
IN000627.ai
I.
Check that the current drive is D:. Also, check that the folder name represents the execution date and time (YYYYMMDDhhmmss).
➔ The log information deletion confirmation window opens.
MUApp0004.ai
NOTE If you insert a formatted disk at this step, the above disk formatting confirmation window does not open; however, the following message appears. Click [OK] in response to the message because the backup process remains unaffected.
MUApp0003.ai
MU000040.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-9
PM-10 12. Click [OK].
■ Post-backup confirmation
➔ The backup destination folder creation confirmation window opens.
1.
From “My Computer” on the [Start] menu, open drive D: (DVD drive) and verify that the files are stored.
IN000628.ai
13. Click [OK]. ➔ Upon completion of backup processing, the completion window opens.
IN000629.ai
MU000042.ai
14. Click [OK]. ➔ The system returns to the “Main Menu” window.
2.
Remove the backup disk from the DVD drive, and then insert the Image storage disk.
3.
Double-click
, which is displayed in the upper left corner of the
desktop. ➔ The log-in window opens.
15. Click [Finish]. ➔ The system returns to the desktop window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-10
PM-11 4.
9.
Log in as “fieldengineer”. ➔ The “Study List” window opens. For the procedure for logging in as fieldengineer, see “5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD” under “IN: Installation.”
5.
Click “All studies” under “Disk”.
6.
Verify that the list on the storage disk is displayed.
Click [OK]. ➔ The system returns to the “Study List” window.
10. Click [Close] in the upper left corner of the “Study List” window. ➔ The “[20339] Application will be terminated. +Are you sure?” dialog box opens.
IN000625.ai
11. Click [OK]. IN000630.ai
7.
Click
➔ The system returns to the desktop screen.
in the indicator section.
➔ The “Indicator” window opens.
8.
Verify that no error information is recorded as an event.
IN000631.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-11
PM-12 7.2 Verification of Date and Time Verify the date and time from “Setting PC (OS) date/time”, which is included in the Simplified setup wizard of the Service Utility. See “5.2 Setting the Date and Time” under “MU: Maintenance Utility.”
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-12
PM-13 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-13
PM-14 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
PM-14
IN-I
CR-IR 391CL Service Manual
IN: Installation
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-I
IN-II
IN: Installation
Control Sheet Issue date
Revision number
04/28/2009 01/08/2010
01 02
020-221-02E 01.08.2010 FM5563
Reason New release (FM5535) Revision for software V1.1(B) (FM5563)
1. CR-IR 391CL Installation Conditions This section states the PC (controller) and monitor installation conditions.
u NOTE u
Environmental conditions Avoid installing the machine at the following places: Places where the temperature changes drastically Places near heaters or other heat sources Places where the machine is likely to be wet or submerged Places where the machine is likely to come into contact with any corrosive gas Dusty or dirty places Places where the machine is subjected to constant vibration or shock Places where the machine is subjected to excessive vibration or shock Places exposed to direct sunlight
Listed below are the abbreviations adopted in this chapter. : Application : Application key : Reader Unit RU configuration data : : RU application RU maintenance utility :
1.3 Places of Installation
AP AP key RU RU-Config RU-AP RU PC-TOOL
Also, be sure that the monitor is not installed at the following places: For the dimensions and weights of the monitor and peripherals, see the respective manuals that are supplied with them.
1.1 Dimensions and Weight Dimensions (width height depth) PC
Places where the monitor is surrounded, such as in a rack case Places whether the display surface is exposed to direct sunlight Places near a transformer, another monitor, a power line, or a 0.02 Gauss or more of AC magnetic field
Weight Approx. 10.4 kg Approx. 8.3 kg Approx. 9.6 kg Approx. 4.63 kg Approx. 5.6 kg
1.2 Temperature and Humidity Condition
Temperature
Humidity
Operating Non-operating
10°C to 35°C -20°C to 60°C
30% to 80% RH (non-condensing) 30% to 80% RH (non-condensing)
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-1
IN-2 1.4 Power Requirements Frequency PC
Monitor
50Hz/60Hz
1.5 Grounding Input voltage
Max. input current
AC115 to 230V
4.0A/2.0A
S2031W-HBK 50Hz/60Hz
AC100V to 120V AC200V to 240V
0.7A
DELL E170S
50Hz/60Hz
AC100V to 120V AC200V to 240V
1.5A
S1721-SHBK
50Hz/60Hz
AC100V to 120V AC200V to 240V
0.65A/0.4A
Connect power cables appropriately following the local standards, rules and regulations applicable to grounding.
Phase : Single phase Power frequency : 50/60 Hz
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-2
IN-3
2. Installation Procedure Overview IMPORTANT Be sure that the following equipment is completely installed and set up.
1. Hardware setup Check the supplied component items, install the CR-IR 391CL accessories, and make cable connections to the RU.
RU See Chapters 1 to 11 of “Installation” of the RU Service Manual. Other equipment (such as a film printer) See the installation instructions set forth in the respective Service Manuals.
IMPORTANT Have on hand a CD-R disk that stores the CR-IR 391CL’s AP key (114Y2129002A), which is distributed for use in servicing.
2. Making a cable connection to other equipment Connect a film printer.
3. Making CR-IR 391CL software settings along with option settings Make necessary software settings using the Service Utility, along with a software setup on the film printer.
4. Performing checks for proper operation Check for proper operation from image input to image loading. Check output images. Make a backup copy of the configuration file. View and delete the error log.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-3
IN-4
3. CR-IR 391CL Hardware Setup
3.1 Unloading and Unpacking Remove the following items from the packing box.
3.1 Unloading and Unpacking
3.2 Checking the Component Items
PC (controller) Monitor Others (options, etc.)
CAUTIONS 3.3 Installing the Accessories and Optional • • • Install the monitor, insulating Items transformer (only for units used in Japan), keyboard, and mouse. 3.4 Connecting a Cable Between the RU and Other Equipment
020-221-01E 04.28.2009 FM5535
When unloading, transferring, and unpacking the machine, observe the following precautions: Do not subject the machine to vibration or shock. If the machine is unduly vibrated or shocked while it is unloaded or transferred, it may become damaged or defective. Avoid moisture condensation inside the machine. If the machine is subjected to a drastic temperature change when it is transferred or unpacked, moisture condensation may occur inside the machine. If you turn ON the machine while moisture is condensed on its inner surface, the machine may become defective. To avoid such a problem, be sure to allow the machine to stand at a room temperature for a period of 1 hour or longer and then turn ON the power.
CR-IR 391CL Service Manual
IN-4
IN-5 3.2 Checking the Component Items Check that the following component items are fully supplied.
For details of the component items, see “1.2 Optional Components” under “Product Specifications.”
CR-IR 391CL Service Manual
IN-5
IN-6 3.3 Installing the Accessories and Optional Items Connect the insulating transformer (only for units used in Japan), keyboard, mouse and monitor to the PC as illustrated below:
3.3.1 Keyboard, Mouse, and Power Cable
3.3.2 Monitor The following monitors can be connected to CR-IR 391CL. 17 inch LCD monitor (Nanao S1721-SHBK) 17 inch LCD monitor (DELL E170S) 20 inch LCD monitor (Nanao S2031W-HBK)
■ Installation of the LCD
CAUTIONS For a PC provided with the source voltage changeover switch (between 115 and 230 VAC), set the PC source voltage according to the voltage supplied to the institution concerned and then connect the power cable to the power source.
● LCD panel installation
1.
NOTE
Do not bind or tie down the AC power cable such that strain will be placed on it.
GOOD
NG
1.
Connect the power cable to the power source.
Connect the VGA cable and the AC power cable. For information on how to connect the VGA cable and the AC power cable, see the LCD panel operation manual.
Connect the keyboard, mouse, and power cable to the PC. For details on the connection procedures, see the documentation supplied with the PC.
2.
Place the LCD panel on a level surface.
● Making VGA cable and AC power cable connections FR1H1921.EPS
1.
Take the LCD panel out of its carton and install it in a place of use.
3.3.3 Film Printer Hardware Setup (option) Connect a film printer as follows.
1.
Connect the AC power cable. For information on how to connect the AC power cable, see the film printer’s operation manual.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-6
IN-7 3.4 Connecting a Cable Between the RU and Other Equipment
3.4.1 Making a Cable Connection to the RU
1.
For information on how to connect the AC power cable, see the RU’s operation manual.
Connect the RU and other equipment to the CR-IR 391CL via network cables.
NOTE To connect the CR-IR 391CL to the RU, use the following network cable. The UTP type which is compliant with category 5 or more should be used. IEC950/UL1950-compliant cables should be used.
For the network type RU operation With 100BASE-TX (straight) cables, connect the RU to the CR-IR 391CL via a hub. 100BASE-TX cable (straight) CR-IR 391CL
HUB
100BASE-TX cable (straight)
Connect the AC power cable.
2.
Make connections to the LAN using network cables. For information on how to make network cable connections, see “IN: Installation” of the RU Service Manual.
REFERENCE The RU’s cable connector is found in the lower portion of the right-hand side of the RU main unit.
100BASE-TX cable (straight) RU Other connected hosts (Film printer) 00000028.EPS
3.4.2 Film Printer Cable Connection (option)
1.
Using a network cable, connect the film printer to the LAN. ● In the case of DRYPIX 1000/3000 See “IN: Installation” of the DRYPIX 1000/3000 Service Manual.
● In the case of DRYPIX 2000 See “IN: Installation” of the DRYPIX 2000 Service Manual.
● In the case of DRYPIX 4000 See “IN: Installation” of the DRYPIX 4000 Service Manual.
● In the case of DRYPIX 7000 See “IN: Installation” of the DRYPIX 7000 Service Manual.
● In the case of DRYPIX PRIMA See “IN: Installation” of the DRYPIX PRIMA Service Manual.
NOTES Do not connect a telephone line to the network connector of the CR-IR 391CL nor to that of other equipment. For the above-mentioned equipment (the CR-IR 391CL and DRYPIX), IEC950/ UL1950-compliant cables should be used.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-7
IN-8
4. Software Setup
4.1 Setting the Regional and Language Options Prior to performing necessary settings using the Service Utility functions, perform OS settings according to the region where the equipment is to be installed.
4.1 Setting the Regional and Language Options
1.
Turn ON the PC power. Windows Vista starts up. After about one minute, the CR-IR 391CL starts.
2.
4.2 Changing the Displayed Language and Replacing the Menu Database
When the initial window opens, sequentially click its upper left and upper right corners within a period of 2 to 3 seconds. Click the upper left corner first, and then the upper right corner.
4.3 Option Key / AP Key Installation
4.4 Setup by the Simplified Setup Wizard • • Performing preparatory operations (such as the reinstallation of option keys and AP keys) that are required to start up the CR-IR 391CL.
00000118.ai
The “ServiceUtilityAuthentication” window opens.
4.5 RU Settings
4.6 Film Printer Software Setup (option)
• • Operation to be performed as required
MU00001 .ai
3.
Click [Cancel]. ➔ The System return to the desktop screen.
4.7 Checking Connections with Other Equipment
• • Checking connections with other pieces of equipment (Host equipment and DICOM equipment)
4.
menu.
➔ The “Control Panel” window opens. If the window is not in the Classic View mode, click [Classic View] to change the display to Classic View.
5. 020-221-02E 01.08.2010 FM5563
Select [Control Panel] from the
Double-click [Regional and Language Options].
CR-IR 391CL Service Manual
IN-8
IN-9 ➔ The [Regional and Language Options] window opens.
7.
Click [Customize this format]. ➔ The [Customize Regional Options] window then opens.
8.
Select the “Date” tab.
IN000433.ai
6.
Click the “Formats” tab to select a language (region) to use from the pull-down menu in “Current format”. N000434 ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-9
IN-10 9.
Following examples shown in the table below, enter a date from the keyboard in the [Short date] box of the [Date formats] field.
12. Select the “Time” tab.
CAUTION A date entered will not be displayed correctly if the order to display “year/ month/day” used in the CR-IR 391CL system is different from that of the OS date format. Because this is used for important information, including the date of study and the like, it is essential to perform a date setting on the OS side carefully at this step. For details of settings of the date format used in the CR-IR 391CL system, see “4.4.4 System Settings.” Date format used in the CR-IR 391CL
Date format used in the OS’ short “Date” format
Japanese date (S62.10.07)
yy/MM/dd
ANSI long date (1987.OCT.07)
yyyy/MM/dd
ANSI short date (1987.10.07)
yyyy/MM/dd
American long date (OCT.07.1987)
MM/dd/yyyy
American short date (10.07.1987)
MM/dd/yyyy
European long date (07.OCT.1987)
dd/MM/yyyy
European short date (07.10.1987)
dd/MM/yyyy
* Enter directly from the keyboard because some formats are not displayed in the pull-down menu.
10. Similarly, perform settings for the [Long date] box. NOTE When doing so, observe the order of entering “year/month/day” in the short date format determined at Step 6 above.
11. Click [Apply].
MU000404.ai
13. Select [HH:mm:ss] or [H:mm:ss] for the [Time format:] box setting. CAUTION Do not use “tt” representation. The CR-IR 391CL database will not be displayed correctly if [hh:mm:ss tt] or [h:mm:ss tt] is specified for the time format.
14. Click [OK]. ➔ The system returns to the [Regional and Language Options] window.
15. Click [OK]. ➔ The system returns to the Control Panel.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-10
IN-11 Defining the character to be used as a decimal point
3.
Select “.” (period) as the character to be used as a decimal point. If anything other than a period is selected, an error occurs when you select an image distribution destination with the QA function.
1.
Check to see that the character specified in the “Decimal symbol” field is “.” (period). If not, change it to “.” (period). If, as a result of the above selection, the same symbol is selected for the “Digit grouping symbol” and “Decimal symbol” fields, change the symbol for the “Digit grouping symbol” field.
In the “Control Panel” window, double-click “Regional and Language Options.” The “Regional and Language Options” window opens.
2.
Make sure that the “Formats” tab is selected and click [Customize this format].
RI000228.ai
The “Customize Regional Options” window opens. RI000226.ai
4.
Click [OK]. The system returns to the “Regional and Language Options” window.
5.
Click [OK]. The system returns to the Control Panel.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-11
IN-12 4.2 Changing the Displayed Language and Replacing the Menu Database
3.
Double-click “DVD RW drive (D:)”.
In the CR-IR 391CL system, English (not in USA) version menus and parameters have been installed as the default values. Replace the menu database and parameter files according to the place of delivery of this system.
NOTE Change the displayed language first and then perform necessary settings. Changing the displayed language causes the settings performed in the Service Utility or User Utility to be lost, initializing the system settings to the default values determined individually for each country.
1.
Insert the CR-IR 391CL Application Software CD into the DVD drive.
2.
Select [Computer] form the
IN000442.ai
➔ The installation launcher starts.
menu.
➔ The “Computer” window opens.
(“Vx.x” represents a version number.)
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
INAppL0001.ai
IN-12
IN-13 4.
Click
.
6.
Select “Color” and click [Next]. ➔ The confirmation window opens.
➔ A window opens, where a desired language is to be selected.
N000438.ai
IN000436.ai
5.
On the window that opens, select a language to be installed and then click [Next].
7.
Check the selected “Language” and “Monitor Type” and then click [Yes]. To change a selected value, click [No] to return to the previous window. ➔ Setup file installation processing will then start. After the completion of the installation processing, the system returns to the installation launcher top window.
➔ A window opens, where a monitor type is to be selected.
8.
Click
.
➔ A window opens, where a desired language is to be selected.
IN000437.ai
IN000439.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-13
IN-14 9.
Select the language for study menus to be installed and click [Next]. ➔ [Do you want to use FNC (Flexible Noise Control Processing)?] is displayed.
IN000440.ai
10. Select “ON (Software Options required)” and click [Next]. ➔ The confirmation window opens.
IN000441.ai
11. Check the values selected for “Language” and “FNC” and click [Yes]. To change the selected value, click [No] to return to the previous window.
➔ Parameter file installation processing will then start. After the completion of the installation processing, the system returns to the installation launcher top window.
12. Click [Finish]. 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-14
IN-15 4.3 Option Key / AP Key Installation
The installation procedure is described below.The same installation procedure applies to all the option keys.
4.3.1 Option Key Installation
1.
Insert an option key CD into the DVD drive.
2.
Select “Computer” from the
The following option keys are available. Install necessary option keys in compliance with the CR-IR 391CL installation specifications. Function
Product code IR 391 MFP E
MFP image processing
Image input/output
IR 391 DICOM STORAGE E
DICOM-based image transmission functions available
IR 391 DICOM PRINT E
DICOM print function
IR 391 F-LAYOUT PRINT E
Free layout print function
IR 391 DICOM ID MWM E
DICOM MWM Patient information
Print output Patient information
“DVD RW drive (D:)”.
Description
Image processing
menu and double-click
The installation start window opens. The indication varies with the option key for installation.
IN000443.ai
3.
Click [Continue]. A window opens to indicate the completion of installation. The indication varies with the option key for installation.
IN000444.ai
4.
Click [OK]. The system returns to the desktop screen.
020-221-02E 01.08.2010 FM5563
5.
Remove the CD from the DVD drive.
6.
To install other option key, change the CD and repeat steps 2 through 5.
CR-IR 391CL Service Manual
IN-15
IN-16 4.3.2 AP Key Installation NOTE Install the AP key after all option keys have been installed. This is because once an option key has been installed, the AP key is invalidated requiring thus the AP key to be reinstalled. Install the AP key as follows:
1.
Insert an option key CD into the DVD drive.
2.
Select “Computer” from the
menu and double-click
“DVD RW drive (D:)”. The installation start window opens.
IN000445.ai
3.
Click [Continue]. A window opens to indicate the completion of installation.
IN000446.ai
4.
Click [OK]. The system returns to the desktop screen.
5.
Remove the CD from the DVD drive.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-16
IN-17 4.4 Setup by the Simplified Setup Wizard
4.
Perform the following:
Using the simplified setup wizard of the Service Utility, settings that are required for installation are made.
4.4.1 Startup of the Service Utility
1.
Make sure that there is no icon representing the CR-IR 391CL server on the task tray. If the icon is present (meaning that the CR-IR 391CL server is up and running), right-click the icon and select “Exit”
I.
II.
For details, see “6.4 Turning OFF the CR-IR 391CL and RU.”
2.
On the desktop screen, double-click
IN000416.ai
.
I. Enter the password “fieldengineer.” II. Click [OK].
The CR-IR 391CL starts up.
3.
➔ The Service Utility starts up and the “Service Utility top” window opens.
Within 2 to 3 seconds of the appearance of the initial window, sequentially click its upper left and upper right corners. Click the upper left corner first, and then the upper right corner.
00000118.ai
The “ServiceUtilityAuthentication” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-17
IN-18 4.4.2 Starting the Simplified Setup Wizard
1.
Click [Simplified setup wizard] on the “Service Utility top” window.
Click
IN000409.ai
The “Setting PC (OS) date/time” window of the Simplified setup wizard opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-18
IN-19 1.
4.4.3 Setting the Date and Time
Click [Date/time change]. The “Date and Time” window opens.
2.
Verify the date, time and time zone.
NOTE Carefully check the date and time because they are important values for the study date and exposure time.
If the shown “Date”, “Time” and “Time zone” value is not correct, change it as appropriate and click [Apply].
00000115.ai
MU000502.ai
3.
Click [OK]. The system returns to the “Setting PC (OS) date/time” window.
4.
Click [Next]. The “System settings” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-19
IN-20 4.4.4 System Settings Use the “System settings” window to perform setup concerning the Institution name, date/time format, and patient name format (multi-byte), and the like.
1.
Enter “Institution name represented by single-byte alphanumerics.”
2.
Click the downward arrow mark ( select it.
) for “Year/month/day format” to
CAUTION If you have changed the “year/month/day” format, be sure to change the setting of the OS’ “short date” format as well. For details of the necessary setting, see “4.1 Setting the Regional and Language Options.” Setting
Japanese date (S62.10.07)
Meaning Year+YY.MM.DD
ANSI long date (1987.OCT.07)
YYYY.MONTH.DD
ANSI short date (1987.10.07)
YYYY.MM.DD
American long date (OCT.07.1987)
MONTH.DD.YYYY
American short date (10.07.1987)
MM.DD.YYYY
European long date (07.OCT.1987)
DD.MONTH.YYYY
European short date (07.10.1987)
DD.MM.YYYY
: Default
3.
Click the downward arrow mark ( select a time format.
) for “Time format”, and then
Setting MU000503.ai
HH:MM:SS AM
HH:MM:SS
Meaning 12-hour format 24-hour format
: Default
4.
Ensure that the [Inputting a patient name by multi-byte characters] check box is not checkmarked.
5.
Click [Next]. ➔ The [Setting the “Server Equipment”] window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-20
IN-21 4.
4.4.5 Server Equipment Settings
Click [Selection] under “Monitor model.”
➤ IMPORTANT
Use the “Server Equipment Settings” window to perform setup concerning the CRIR 391CL server equipment name, software keyboard, monitor, and the like.
For a locally procured LCD monitor, be sure to perform the procedure below: I.
Insert a media (compatible with Windows file system such as FD, CD) where the LUT file is stored into the media drive.
II. Click “Update” on the “Monitor model selection” window. III. Select an LUT for the added model and click [OK]. ➔ The “Monitor model selection” window opens.
MU000505.ai
For details on monitor models, see “6.2.2 Monitor Settings” under “MU: Maintenance Utility.” MU000504 ai
1.
Enter the “Equipment name” (host name).
2.
Verify that “CVXXXXXXXX” is entered as the “Host name” and that “172.16.1.20” is entered as the IP address.
3.
5.
➔ The system returns to the [Setting the “Server Equipment”] window.
NOTE The monitor settings are automatically entered. Although the “Magnified Display (%)” setting can be changed, do not change it now.
(NOTE: The “XXXXXXXX” portion represents an 8-digit serial number.)
For details, see “6.2.2 Monitor Settings” under “MU: Maintenance Utility.”
To use the software keyboard, put a checkmark in the “Use” check box under
020-221-01E 04.28.2009 FM5535
(
➔
).
Select a monitor model and then click [OK].
6.
Next, perform the following setup steps (DICOM and disk drive settings).
CR-IR 391CL Service Manual
IN-21
IN-22 ● Set up DICOM (Media Storage setting) The procedure for setting information for this equipment concerning DICOM Media Storage is described below. DICOM Media Storage is used for image transfer to a DVD.
1.
2.
Enter an AE name (e.g., MEDIA) in the “AE Name” field under “Media Storage setting.”
3.
Click the downward arrow mark ( ) for “Maximum pixel density size for a stored image”, and then select a maximum pixel density size for a stored image.
Click [DICOM setting]. ➔ The “Set up DICOM” window opens.
Setting
Description
ST
Standard density
High density
HQ
: Default
➥ REFERENCE Selecting “HQ” decreases the number of images that can be recorded on a DVD. For the number of images that can be stored when the ST, HQ, compressed, or uncompressed option is selected, see under “1.6 Image Storage Performance” of “Product Specifications.”
4.
Click the downward arrow mark ( ) for “Whether or not to specify data compression for stored images”, and then select a stored image compression option. Setting
Description
Compressed
Compresses the image (lossless).
Leaves the image uncompressed.
Uncompressed
: Default MU050007.ai
➥ REFERENCE
➥ REFERENCE
Selecting “Uncompressed” decreases the number of images that can be recorded on a DVD.
The following items shown within the fame on the window above appear only when the respective options are installed. “Print SCU settings” : Free Layout Print option
For the number of images that can be stored when the ST, HQ, compressed, or uncompressed option is selected, see under “1.6 Image Storage Performance” of “Product Specifications.”
See “4.6 Film Printer Software Setup (option).”
“Settings for Storage SCU” : DICOM Storage option
See “Appendix 1: Settings for Saving Images into DICOM Storage Equipment” in “Appx IN: Installation – Appendix.”
5.
When storing two-byte character (Kanji or other multi-byte character) information, put a checkmark in the “Multi-byte character setup” check box under
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
(
➔
).
IN-22
IN-23 ● Set up DICOM (Print SCU setting) (option) The procedure for setting information for this equipment concerning DICOM Print is described below.
1.
4.
Put a checkmark in both the “BasicGrayscalePrint” and “Verification” check boxes under “Presentation Context” ( ➔ ).
➥ REFERENCE “Verification” is a service class for verifying the connection between DICOM devices. When verifying the connection, it is necessary to check “Verification.”
Click the “Print SCU setting” tab.
For details on connection verification, see “7.3 Connection Check” under “MU: Maintenance Utility.”
5.
Click [OK]. ➔ The system returns to the [Setting the “Server Equipment”] window.
Click
MU050009.ai
2.
Enter an AE name (e.g., FCR-CSL) in the “AE Name” field under “Print SCU setting.”
3.
Specify the “Timeout value” (timeout value between DICOM messages: 300).
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-23
IN-24 ● Set up DICOM (Settings for Storage SCU) (option) The procedure for setting information for this equipment concerning DICOM Storage output is described below.
1.
Click [DICOM setting].
4.
Specify the “Timeout value” (timeout value between DICOM messages: 300).
5.
Click [OK]. ➔ The system returns to the [Setting the “Server Equipment”] window.
➔ The “Set up DICOM” window opens.
2.
Click the “Settings for Storage SCU” tab.
Click
MU050008.ai
3.
Enter an AE name (e.g., FCR-CSL) in the “AE Name” field under “Settings for Storage SCU.”
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-24
IN-25 ● Disk drive settings The procedure for setting the DVD drive that is to be connected to the server equipment (CR-IR 391CL machine).
1.
3.
Click [View] to specify the drive path. ➔ The “Browse for Folder” window opens.
Select the connected DVD RW drive (D:) and then click [OK]. ➔ The system returns to the “Disk drive settings” window.
5.
Click the downward arrow mark ( ) for “Disk format application type”, and then select a disk format application type (Dedicated application). Setting
Not specified
Description Does not provide formatting.
Dedicated application
Provides formatting with the dedicated application.
Provides formatting with an OS function.
OS
: Default
MU000507.ai
2.
Enter a management disk drive name (e.g., DVD) in the “Drive name” field under [Setting a “Disk Drive for Server Management”].
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-25
IN-26 6.
Click [View] to specify the “Dedicated application format path.” ➔ The “Open” window opens.
7.
9.
Check what is selected for “Drive to be created” in “Set up “PDI” and click [Edit].
Select “C:\Program Files\FujiFilm\Hobbit\System\ FFUdfFmtToolForVista” on the folder selection window.
MU060209.ai
➔ Notepad starts.
MU060210.ai
10. Input a facility name. IN000209.ai
➔ “C:\Program Files\FujiFilm\Hobbit\System\FFUdfFmtToolForVista” is input automatically in the “Dedicated format application path” field.
8.
Input “rD” to the end of the path (“r” represents a space and “D” represents a DVD drive path).
➥ REFERENCE After the input as directed above, the description in the “Dedicated format application path” field will be as follows.
11. From the “File” menu, select “Overwrite.”
The “Save as...” window opens.
12. Confirm the “Encoding” and click “Save.” NOTE Select “ANSI” or “Unicode” character code. Input data can be saved only when either “ANSI” or “Unicode” is selected.
13. Select “Close Notepad” from the “File” menu. ➔ Notepad window closes and the system returns to the “Disk drive settings” window.
14. Click [OK]. ➔ The system returns to the “Setting the “Server Equipment”” window.
15. Click [Next]. ➔ The “Setting the Image Reader” window opens. 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-26
IN-27 4.4.6 Setting the Image Reader
4.4.7 Setting the Film Printer See “5.6 Setting the Film Printer (option)” under “MU: Maintenance Utility”.
4.4.8 Setting the Storage Device See “5.7 Setting for DICOM Storage Device (option)” under “MU: Maintenance Utility”.
4.4.9 Exiting the Simplified Setup Wizard
MU000522.ai
MU000509.ai
1.
Enter an Image Reader name (default: Image Reader) in the “Equipment name” field.
2.
Enter an Image Reader host name (default: RU0) in the “Host name” field.
3.
Enter an Image Reader IP address (default: 172.16.1.10) in the “IP Address” field.
4.
Remove the check mark from “Check the box to use Patient information display”.
5.
Click [Next].
1.
Click [Finish]. ➔ The system returns to the “Service Utility top” window.
The Simplified setup wizard is now closed.
➤ IMPORTANT For an output device set up using the Simplified setup wizard, be sure to use the User Utility to perform “Setting a destination for image output.”
➔ The “Simplified settings completed” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-27
IN-28 4.5 RU Settings To perform RU software settings, be sure to observe the procedures shown in the flow below. 4.5.1 Installing the RU PC-TOOL 4.5.2 Setting Up and Checking Firewall Settings
4.5.1 Installing the RU PC-TOOL The RU PC-TOOL is a utility (also referred to as the FCR TOOL) that exercises RU-AP installation, RU-Config setup, data backup, and other functions. For the operations of the CR-IR 391CL and RU, it is necessary that the RU PCTOOL be installed in the CR-IR 391CL system.
1.
Select [Control Panel] from the
menu.
➔ The “Control Panel” window opens. 4.5.3 Installing and Registering RU-AP
2.
Double-click “User Accounts”. ➔ The “User Accounts” window opens.
3.
Select “Turn User Account Control on or off”. ➔ The “User Accounts Control” window opens.
3.
Click
.
AWV22035_E.ai
➔ The “Turn User Account Control on or off ” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-28
IN-29 4.
Remove the checkmark from “Use User Account Control (UAC) to help protect your computer”.
8.
Insert the RU APL Software CD into the CR-IR 391CL’s DVD drive.
9.
Select [Computer] from the
menu and double-click
“DVD RW drive (D:)”. ➔ The “Set Up PC-TOOL” window opens.
10. Click [INSTALL]. MU060211.ai
➔ The following window opens.
MU060212.ai
5.
Click [Restart Now]. ➔ The PC restarts.
6.
After a while, the CR-IR 391CL starts up.
Within 2 to 3 seconds of the appearance of the initial window, sequentially click its upper left and upper right corners. Click the upper left corner first, and then the upper right corner.
MC000307.ai
00000118.ai
The “ServiceUtilityAuthentication” window opens.
7.
Click [Cancel] to close the window. The system returns to the desktop screen.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-29
IN-30 11. Select “For FTP-Server”, and click [SET].
13. Click [NEXT].
NOTE Be sure to select “For FTP-Server.” If “For Client PC” is selected, installation cannot be done successfully. If you have erroneously selected “For Client PC” and clicked [SET], perform installation again by following the procedure below. See “Appendix 8 Corrective Procedure to be Performed after Improper RU PC-TOOL Installation” under “IN: Installation” of the RU Service Manual.
FRCH7043.ai
14. Click [Install].
FRCH7168.ai
➔ The confirmation window opens.
MC000428.ai
12. Click [OK].
FRCH7045.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-30
IN-31 15. When the installation completes, click [Finish].
16. Press the key. ➔ The following window opens.
FRCH7193.ai
FRCH7046.ai
➔ The following window opens.
17. Ptess the key. ➔ The “Windows Security Alert” window opens.
18. Click [Unblock].
FRCH7192.ai
MC000149.ai
The system returns to the “Set Up PC-TOOL” window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-31
IN-32 19. Click [Exit].
MC000308.ai
20. Remove the RU APL Software CD from the DVD drive, and restart the PC.
After a while, the CR-IR 391CL starts up.
21. Within 2 to 3 seconds of the appearance of the initial window, sequentially click its upper left and upper right corners.
Click the upper left corner first, and then the upper right corner.
00000118.ai
The “ServiceUtilityAuthentication” window opens.
22. Click [Cancel] to close the window. 020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-32
IN-33 4.5.2 Setting Up and Checking Firewall Settings
1.
Select [Control Panel] from the
5.
Check to see that “BmpServer” is checkmarked.
menu.
➔ The “Control Panel” window opens.
2.
Double-click [Windows Firewall]. ➔ The “Windows Firewall” window opens.
3.
Select “Allow a program through Windows Firewall”.
MU060213.ai
➔ The “Windows Firewall Settings” window opens.
4.
Select the “Exceptions” tab and check to see that “FTP (File Transfer Protocol)” is checkmarked.
MC000305.ai
If “BmpServer” does not exist, perform the procedure described later in “n If ‘BmpServer’ does not exist (Adding a program).”
MC000092.ai
If the “FTP” item does not exist, perform the procedure described later in “n If ‘FTP’ does not exist (Adding a program).” 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-33
IN-34 ■ If “FTP” does not exist (Adding a program)
1.
2.
Click [Browse...]. ➔ The “Browse” dialog opens.
In the “Exceptions” tab of the “Windows Firewall Settings” window, click [Add program...].
MC000095.ai
MC000093.ai
3.
Enter “C:\WINDOWS\SYSTEM32\FTP” in the filename field, and click [Open].
4.
Click [OK] in the “Add a Program” window. ➔ The system returns to the “Exceptions” tab in the “Windows Firewall” window.
➔ The “Add a Program” window opens.
5.
Make sure that “FTP” is checkmarked.
NOTE “File Transfer Program” or “ftp” may be displayed, instead of “FTP”.
MC000094.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-34
IN-35 ■ If “BmpServer” does not exist (Adding a program)
1.
2.
Click [Browse...]. ➔ The “Browse” dialog opens.
In the “Exceptions” tab of the “Windows Firewall Settings” window, click [Add Program...].
MC000095.ai
MC000093.ai
3.
Select “C:\Program Files\FujiFilm\FCR\TOOL\BmpServer”, and click [Open].
4.
Click [OK] in the “Add a Program” window. ➔ The system returns to the “Exceptions” tab in the “Windows Firewall” window.
➔ The “Add a Program” window opens.
5.
Make sure that “BmpServer” is checkmarked.
MC000094.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-35
IN-36 ■ Setting up the FTP port
1.
■ Setting up inetinfo
In the “Exceptions” tab of the “Windows Firewall Settings” window, click [Add Port].
1.
In the “Exceptions” tab of the “Windows Firewall Settings” window, click [Add Program...].
➔ The “Add a Port” window opens.
MC000313.ai
2.
In the “Name:” field, enter “FTP_port”.
3.
In the “Port number” field, enter “21”.
4.
Click “TCP” to select it.
MC000093.ai
➔ The “Add a Program” window opens.
MC000097.ai
5.
Click [OK].
MC000094.ai
➔ The system returns to the “Exceptions” tab in the “Windows Firewall Settings” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-36
IN-37 2.
4.
Click [Browse...]. ➔ The “Browse” window opens.
Click [Open]. ➔ The system returns to the “Add a Program” window.
MC000095.ai MC000311.ai
3.
Select “C:\WINDOWS\system32\inetsrv\inetinfo”, and click [Open].
5.
With “inetinfo” being selected, click [OK]. ➔ The system returns to the “Windows Firewall” window.
MC000310.ai
MC000312.ai
6.
Make sure that “inetinfo” is checkmarked, and click [OK]. ➔ The system returns to the “Control Panel.”
7. 020-221-01E 04.28.2009 FM5535
Close the “Control Panel” window.
CR-IR 391CL Service Manual
IN-37
IN-38 4.5.3 Installing and Registering RU-AP
3.
Click [Start].
Install the RU-AP in the CR-IR 391CL. To do this, use the RU PC-TOOL and perform the procedures set forth in this section.
NOTE Before installing the RU-AP, turn ON the RU power.
➥ REFERENCE This section describes the procedures, by way of example, where settings are made as follows: INSTALL VERSION : 1.0 LANGUAGE : NONE BRAND TYPE : NONE
1.
Turn the RU OFF and then turn it ON.
NOTE Although a connection error occurs on the RU side, it will pose no problem to subsequent work if you simply clear the alarm.
2.
Select “Computer” from the
FRCH7048.ai
4.
Enter “RU NAME” and “RU IP ADDR.”
NOTE
menu and double-click
Enter the IP address of the RU that has been set on the CR-IR 391CL.
“DVD RW drive (D:)”.
#1[Input] #2[Input] FRCH7050.ai
5.
Click [PING]. [Click]
FRCH7051.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-38
IN-39 6.
Check the result of PING, and click
to close the window.
8.
Click [OK].
#2
FRCH7054.ai
#1 [Check]
9.
Select “INSTALL VERSION and click [OK].”
“0% loss” should appear. FRCH7052.ai
● [GOOD indication]. If the following message appears, the result is normal. | Ping statistics for 172.16.1.10: | Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
| |
● [NO GOOD indication].
FRCH7055.ai
Other than above is all abnormal. (The selected IP address of the RU is displayed.)
10. Make sure that “INCH” is selected for “IP Size Code Setting” (size system of the IP used).
NOTE In the case of “NO GOOD” indication See “MT: Machine Troubleshooting” of the RU Service Manual.
7.
Click [INSTALL]. [Click]
FRCH7053.ai
➥ REFERENCE When clicking on [INSTALL], “Under maintenance” appears on the operation panel of the RU.
020-221-01E 04.28.2009 FM5535
FRCH7114.ai
11. If configuration information other than the default settings is used at the request of the institution, change the settings.
CR-IR 391CL Service Manual
IN-39
IN-40 12. Click [SET].
14. Confirm the installation precautions. CAUTION While the flash ROM is being written into, never turn OFF the RU or CR Console. If you turn OFF the power, the program stored in the memory becomes damaged and cannot restart.
15. Click [SET]. ➔ When you click on [SET], the installation screen opens on the CR Console display. While the flash ROM is being written into, the RU’s LED blinks. FRCH7060.ai
13. Check to see that “172.16.1.20” and “CL0” have been set for “IP ADDRESS” and “CL NAME”, respectively.
NOTE If the “FTP Server IP Address” setting has been changed before the installation of the RU software, enter the new address.
NOTE Do not close the installation screen until the flash ROM write process is completed. If you inadvertently close the installation screen, return to Step 7 and perform the installation procedure again. The flash ROM write process takes about 8 minutes.
[Click]
The installation screen appears on the CR-IR 391CL display.
FRCH7176.ai
While the flash ROM write process is being performed, the LED and Cassette ready lamp blinks.
FRCH7191.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-40
IN-41 16. Verify that the flash ROM write process is completed, and then press the key twice.
18. Check the version of the RU software, and close RU PC-TOOL. RU NAME IP ADDRESS RU TYPE VERSION ru0 172.16.1.11 CR-IRxxx 1.1
#1 [Check]
#1 [Check]
#2
#2 [Press 2 times] “Enter” key
RU TYPE CR-IRxxx: Model name of the RU to be connected is displayed. FRCH7066.ai
17. Click [OK].
GOOD indication The text is displayed in black. NO GOOD indication The text is displayed in red or the version number is not displayed.
#3 [Click]
FRCH7068.ai
NOTE FRCH7067.ai
If “NO GOOD” is indicated, go back to Step 1. and perform installation again.
19. Verify that the RU’s LED is extinguished, and then turn OFF the RU. ➥ REFERENCE The message “Under maintenance” is displayed on the operation panel. However, turning OFF the RU power does not affect the RU’s functionality.
20. Turn ON the power of the RU.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-41
IN-42 4.5.4 Setting the User Account Control (Activate)
5.
Click [Restart Now]. ➔ The PC restarts.
Turn on the “User Account Control.”
1.
Select [Control Panel] from the
menu.
6.
➔ The “Control Panel” window opens.
2.
After a while, the CR-IR 391CL starts up.
Within 2 to 3 seconds of the appearance of the initial window, sequentially click its upper left and upper right corners. Click the upper left corner first, and then the upper right corner.
Double-click “User Accounts”. ➔ The “User Accounts” window opens.
3.
Select “Turn User Account Control on or off”. ➔ The “Turn User Account Control on or off ” window opens.
4.
Place a checkmark in “Use User Account Control (UAC) to help protect your computer”.
00000118.ai
The “ServiceUtilityAuthentication” window opens.
7.
Click [Cancel] to close the window. The system returns to the desktop screen.
MU060214.ai
➔ The following window opens.
MU060212.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-42
IN-43 4.6 Film Printer Software Setup (option) This section shows the procedures of making a DICOM Print setup in order that any of the following film printers will be able to receive images from the CR-IR 391CL.
● DRYPIX 1000/3000 See “8.1 Network Connection (DICOM)” under “IN: Installation” of the DRYPIX 1000/3000 Service Manual.
● DRYPIX 2000 See “9. CLIENT SETTINGS” under “IN: Installation” of the DRYPIX 2000 Service Manual.
● DRYPIX 4000 See “10. SETTING CLIENTS” under “IN: Installation” of the DRYPIX 4000 Service Manual.
4.6.1 Installing the Option Key for Application Key If the “Free Layout Print” option key or “DICOM Print” option key is not installed, that is required.
NOTE When the option key and/or the application key is to be installed, it is required that the CR-IR 391CL is connected to the network. Make sure that network connection has been established before performing the installation.
1.
Insert an option key CD into the DVD drive.
2.
Select “Computer” from the
menu and double-click
“DVD RW drive (D:)”. ➔ The installation start window opens.
● DRYPIX 7000 See “10. SETTING CLIENTS” under “IN: Installation” of the DRYPIX 7000 Service Manual.
● DRYPIX PRIMA See “7. SETTING OF THE EQUIPMENT” under “IN: Installation” of the DRYPIX PRIMA Service Manual. INAppE0001.ai
3.
Click [Continue]. ➔ A window opens to indicate the completion of installation.
INAppE0002.ai
4.
Click [OK]. ➔ The system returns to the desktop screen.
5. 020-221-01E 04.28.2009 FM5535
Remove the CD from the DVD drive.
CR-IR 391CL Service Manual
IN-43
IN-44 4.6.2 Reinstalling the AP Key
4.6.3 DICOM Print Setup
Once you have installed the option key, be sure to reinstall the AP key. Reinstall the AP key using the AP key CD. The installation procedure is as follows:
1.
Insert the AP key CD into the DVD drive.
2.
Select “Computer” from the
See “4.4.5 Server Equipment Settings”
menu and double-click
“DVD RW drive (D:)”. ➔ The installation start window opens.
INAppE0004.ai
3.
Click [Continue]. ➔ A window opens to indicate the completion of installation.
INAppE0005.ai
4.
Click [OK]. ➔ The system returns to the desktop screen.
5.
Remove the CD from the DVD drive.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-44
IN-45 4.7 Checking Connections with Other Equipment This section shows the procedures of checking the connections with other pieces of equipment such as those described below.
■ Displaying the “Connection check” window
■ Starting up the RU’s Maintenance Utility Start up the RU’s Maintenance Utility. For the procedure to start up the RU’s Maintenance Utility, see “Maintenance Utility (MU)” of the RU Service Manual.
■ Running a connection check
● Checking connection to the Host equipment
1.
Click the down-arrow button (
) in the field and select the connection
destination.
2.
Click [Verify connection]. ➔ The DOS prompt opens.
IN000201.ai
1.
If the following message is displayed four times, the connection is in proper working order.
Reply from 172.16.1.10: bytes=32 time<10ms TTL=128
➥ REFERENCE
Click [Connection check] under “Maintenance tool” on the “Service Utility top” window.
Values for “time<10ms” and “TTL=128” in the message above vary depending on the network status. Connection remains normal even though such values vary.
➔ The “Connection Check” window opens.
NOTE If a message saying “Request timed out.” shows up, go back to “4.3 Setup by the Simplified Setup Wizard” and check the settings. Furthermore, check the supply of power to individual network equipment (such as LAN wires and HUBs) and make certain that connections are in proper operating order in order that communication with connected equipment is performed successfully.
3. IN000217.ai
020-221-01E 04.28.2009 FM5535
Repeat Steps 1 and 2 for each of the connection destinations such as the RU and DICOM printer on which a connection check is necessary.
CR-IR 391CL Service Manual
IN-45
IN-46 ● DICOM verification Perform the following procedure when a DICOM printer or a DICOM storage device is connected. * This procedure is unable to perform to a DICOM Media Storage.
1.
Click the down-arrow button (
) in the
4.8 Exiting the Service Utility 1.
Click
on the “Service Utility top” window.
➔ The system returns to the desktop window.
field and select the connection destination.
2.
Click [Verify connection]. ➔ When a message saying “DICOM Verification was succeeded.” shows up on the “FFServiceUtility” window, the connection is in proper working order.
NOTE If a message saying “DICOM Verification was failed.” shows up, go back to “4.3 Setup by the Simplified Setup Wizard” and check the settings. In consultation with the Service Manual of the destination equipment, establish a condition where DICOM communication can be performed successfully.
3.
Click [OK]. ➔ The system returns to the “Connection check” window.
■ Terminating the connection check
1.
Click [Finish] on the “Connection Check” window. ➔ The system returns to the “Service Utility top” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-46
IN-47
5. Checkup Work
5.1 Checking the Startup and Configuration of the RU
5.1 Checking the Startup and Configuration of the RU
➥ REFERENCE If the RU must be used with its IP address changed, make an IP address setting on the RU in consultation with “Appendix 5 Changing the IP Address of an RU” under “CR-IR 391RU Service Manual.”
5.2 Checking the System Configuration
For details, see “Appendix 5 Changing the IP Address of an RU” under “CR-IR 391RU Service Manual.” 5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD
5.1.1 Checking the Startup of the RU 5.4 Checking Output Images (option)
• • • Output images are checked for image format, nonuniformity, and on-film annotation format.
NOTE To operate the CR-IR 391CL system program (including utility programs), Windows Explorer must be shut down. Operating the program with Windows Explorer up and running may cause a problem, such as system hang-up or media error, to occur. However, this does not apply when the procedure where to start up from Windows Explorer is determined.
NOTE Before making a startup check on the RU, be sure to log onto a CR-IR 391CL client. If the RU is started without logging onto any CR-IR 391CL client, an error message indicative of a connection trouble appears on the operator panel of the RU.
■ Preparatory work (login)
1.
On the desktop, double-click
.
The CR-IR 391CL server application starts and its initial window opens. When the server application gets up and running, the icon representing the CR-IR 391CL server shows up in the task tray in the bottom-right corner of the window.
IN000402.a
Internet Explorer starts and the “User Selection” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-47
IN-48 2.
On the User Selection window, click the top, bottom, left, and then right edge portions of the window in order.
3.
Enter the password “fieldengineer” (in lower-case single-byte characters only) and click
.
IN000501.ai
The “Password input” window for service engineers shows up.
NOTES The top, bottom, left, and right edge portion clicks should be done slowly. Too fast clicking may render the detection of position information impossible.
IN000502.ai
The “Study List” window opens.
In the event of a login failure, click [Finish] and close the “User Selection” window once. Click [FCRWeb] on the desktop to reopen the “User Selection” window and go over the above-mentioned operation again.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-48
IN-49 ■ Checking the startup of the RU
1.
Turn ON the power of the RU.
2.
Make sure that the RU’s operator panel looks identical to the “onL”.
FRCH7150.ai
NOTE If the “onL” fails to appear on the RU’s operator panel and an error window shows up instead, perform fault analysis by consulting “Troubleshooting.” “Troubleshooting” of the RU Service Manual
➥ REFERENCE Prior to shipment from the factory, the IP addresses of the RU and CR-IR 391CL were set to their default values. The default values are as follows: Reader Unit IP Address : 172.16.1.10 FTP Server IP Address : 172.16.1.20 RU
Check and compare the RU’s version registered on the “LIST OF EXISTING RUs” and the version found on the RU-APL CD-ROM that came with the RU. LIST OF EXISTING RU RU NAME IP ADDRESS RU TYPE ru0 172.16.1.10 CR-IR391
In the “Run” window that opens, type “C:\Program Files\FujiFilm\FCR\ TOOL\RuPcTool\RuPCTool.exe” and click [OK]. #1 [Select]
VERSION V1.0
[Check] Software version.
#2 [Select] RU-APL CD-ROM #3 [Select]
CR-IR 391RU APL Software V1.0
FRCH7157.ai
3. #4 [Type in] #5 [Click]
If the version of the RU registered on the “LIST OF EXISTING RUs” is found to be lower than the version on the RU-APL CD-ROM in Step 2, perform a software version upgrade.
NOTES In such cases below, upgrade the version of the software to install the latest version to the RU. The RU version registered to the “LIST OF EXISTING RU” is found to be lower than the version described on the RU-APL CD-ROM. For procedural details, see “3.2 Updating the RU Software” under “MC: Checks, Replacement and Adjustments of Parts.”
4.
Close RU PC-TOOL.
FRCH7154.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-50
IN-51 5.1.3 Checking the RU’s Message File
1.
NOTE If “UPDATE (RU MESSAGE)” is not grayed out, install the RU message file using the following steps:
Set the RU-APL CD-ROM into the DVD drive.
I. Click [UPDATE (RU MESSAGE)]. [Insert] RU-APL CD-ROM
[Click] FRCH9518SM.ai
➔ The “Set Up PC-TOOL” window opens.
2.
Check to see that the text “UPDATE (RU MESSAGE)” is grayed out.
FRCH9520SM.ai
➔ The “UPDATE (RU MESSAGE)” window opens.
➥ REFERENCE The grayed-out state of the text “UPDATE (RU MESSAGE)” indicates that the RU’s message file has been correctly installed.
II. Click [OK]. ➔ The system returns to the “Set Up PC-TOOL” window. III. Make sure that “UPDATE (RU MESSAGE)” is grayed out.
[Check] “UPDATE (RU MESSAGE)” is in a grayed-out state.
[Check] “UPDATE (RU MESSAGE)” is in a grayed-out state.
FRCH9519SM.ai
FRCH9519M.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-51
IN-52 3.
5.1.4 Checking the RU Configuration
Click [Exit] to close the “Set Up PC-TOOL” window.
1.
[Click]
If use is to be made of the equipment’s configuration information in a state other than default settings at the request of the institution concerned, make setting changes in accordance with “Appendix A: Setting up RU-Config.” For details, see “Appendix 4: Setting the RU-Config” in “MC: Checks, Replacement and Adjustment of Parts.”
FRCH9522SM.ai
4.
Remove the RU-APL CD-ROM from the DVD drive.
[Remove] RU-APL CD-ROM FRCH9521SM.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-52
IN-53 5.2 Checking the System Configuration ■ Automatic output setting This function generates automatic image printout or performs automatic image storage at study verification or exposure completion. Necessary settings are to be performed in the User Utility. “Appendix 4: Settings for Automatic Output” in “MU: Maintenance Utility.”
■ Automatic verification of a study This function automatically verifies a study that has been subjected to exposure processing. Necessary settings are to be performed in the User Utility.
5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD This section describes the procedures to ensure that image data is saved on DVD successfully and random access to the saved image data is possible on the DVD.
■ Preparatory work (login) Start up the RU and perform logging into the CR-IR 391CL client.
NOTE If the RU is up and running and is logged onto the CR-IR 391CL client, skip the procedures below and go to “ ■ Preparatory work (Preoperation checks on the RU)” “ ■ Preparatory work (preoperation checks on the RU)”
“Appendix 5: Setup for Auto-verify” in “MU: Maintenance Utility.”
■ Automatic logoff setting This function enables the client application to log off the system automatically if no manipulations are performed within a preset time. Necessary settings are to be performed in the User Utility.
1.
Turn ON the RU’s power switch. If it is already ON, just leave it as it is and there is no need to do anything else.
2.
On the desktop, double-click
.
The CR-IR 391CL server application starts and its initial window opens. When the server application gets up and running, the icon representing the CR-IR 391CL server shows up in the task tray in the bottom-right corner of the window.
IN000402.ai
Internet Explorer starts and the “User Selection” window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-53
IN-54 3.
On the User Selection window, click the top, bottom, left, and then right edge portions of the window in order.
4.
Enter the password “fieldengineer” (in lower-case single-byte characters only) and click [Login].
IN000501.ai
The “Password input” window for service engineers shows up.
IN000502.ai
The “Study List” window opens.
NOTES The top, bottom, left, and right edge portion clicks should be done slowly. Too fast clicking may render the detection of position information impossible. In the event of a login failure, click [Finish] and close the “User Selection” window once. Click [FCRWeb] on the desktop to reopen the “User Selection” window and go over the above-mentioned operation again.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-54
IN-55 ■ Preparatory work (preoperation checks on the RU) NOTES For the IP used for image/conveyance checks, an IP of the maximum size used in the hospital should be employed. Make sure that the IP to be used does not contain any important image data exposed.
1.
Check to ensure that the “onL” screen appears.
2.
Perform “Erasure” on the spontaneous radiation and image accumulated on the IP to be used. For details of “Secondary Erasure” processing, see the RU Operation Manual.
3.
■ Preparatory work (disk setup) Make preparations for disk writing, as follows.
1.
Affix the label on the case of the disk used for storing images and enter the date and the title “Image storage disk.”
2.
Click
which is found in the indicator field located in the upper-
right corner of the window.
IN000512.ai
➔ The indicator field (Disk) shows up.
Perform IP exposures.
NOTE Expose the IP at X-ray tube voltage of 80 kVp. Otherwise, the image check cannot be done normally.
► INSTRUCTIONS Expose two IPs of the largest size to be used at the user’s site to the following dose. With the X-ray tube, the first IP should be exposed in a normal orientation, and the second in a 180-degree upside-down orientation. : Tungsten X-ray tube X-ray tube X-ray exposure dose : 1 mR : IP of 14"14" (3535 cm) or 14"17" (3543 cm) size Maximum size Reference conditions : Distance 1.8 m Voltage 80 kVp Amperage 50 mA Time 0.013 sec
020-221-01E 04.28.2009 FM5535
IN000503.ai
CR-IR 391CL Service Manual
IN-55
IN-56 3.
5.
Click [Utility].
Insert a disk, onto which to write, into the tray and click [Next]. ➔ A window opens asking if you wish to format the inserted disk.
➔ The “Disk Operation” window opens.
IN000603.ai
The window above opens only when an unformatted disk was inserted.
6.
Click [OK]. ➔ The fotmat window opens.
N000522.ai
4.
Click [Replacing Disks]. ➔ The “Replacing Disks” window opens.
MU000043.ai
IN000504.ai
7.
Click [Start]. ➔ The following window opens.
MU000044.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-56
IN-57 8.
Click [OK].
12. Leave the default number as it is and click
➔ The following window opens.
.
NOTE If some data has been entered and the default lost consequently, click . MU000045.ai
9.
➔ The system returns to the “Disk Operation” window.
Click [OK]. ➔ The system returns to the format window.
10. Click [Close].
13. Click [Update]. ➔ The equipment information gets updated.
➔ The “Specify how to handle the disk” window opens.
IN000505.ai
11. Select “For Image Storage” and click [Next]. ➔ The “Specify disk name” window opens.
IN000523.ai
14. Click [Close]. ➔ The system returns to the “Indicator” window.
IN000506.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-57
IN-58 15. Click
located in the lower left corner of the Indicator window.
➔ The display of the Indicator window gets updated.
16. Verify the following check items. Check items: Device : Ensure that the device name that has been set by means of the Service Utility is in place. : Ensure that the device name and available write area (%), both of Status which were entered in/under Step 8, are being indicated. : Ensure that “For Storage Disk” is being displayed. Usage Disk Write : Ensure that “Write enabled” is being displayed.
■ Conducting “Image input check” inspection For details of the inspection procedure to be carried out, see the “CR-IR 391CL Operation Manual.”
➤ IMPORTANT Automatic storage on DVD by means of verification operation is an important and essential function, make certain that storage takes place without fail.
1.
Click
located at the bottom of the study list window.
17. Click [OK].
IN000527.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-58
IN-59 3.
➔ The “Patient ID” window opens.
Enter the following items of patient information and click [Next]. Patient Name : Fuji Tarou Date of Birth : 1972.AUG.15 : Male Sex ➔ The exposure menu registration window opens.
IN000508.ai
2.
Enter the patient ID (0123456789) and click [Next]. ➔ The detailed patient information input window opens. IN000510.ai
IN000509.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-59
IN-60 4.
Click
5.
to open the second page.
Click [QC/TEST] and click [IMAGE-FORMAT]. #1 Click
Click
#2 Click
IN000608.ai IN000606.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-60
IN-61 6.
8.
Click [Start Study].
After the input of the image, click [Image Viewer].
➔ The “Start Study” window opens.
Click
IN000227.ai
7.
Insert the IP cassette that has been readied in the course of “■ Preparatory work (Preoperation checks on the RU)” under “5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD” into the RU.
IN000226.ai
➔ The “Image Viewer” window opens.
Cassette Ready lamp [illuminating]
FRCH101006.ai
➔ Shortly after the initiation of reading of the IP, images that have been read into the CR-IR 391CL’S monitor show up. 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-61
IN-62 9.
11. After selecting the study, click
After the image has shown up, click [Verify].
located in the
box.
Click IN000610.ai
IN000632.ai
➔ The following window opens.
10. Click
in the upper left corner of the window.
➔ The system returns to the “Study List” window.
IN000633.ai
12. Click[Output]. ➔ The system returns to the “Study List” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-62
IN-63 13. Click
under
15. After selecting the study, click
.
located in the
box.
IN000611.ai
➔ The “Requesting for disk insert” window opens.
IN000613.ai
➔ The “Image retrieve” window opens.
IN000614.ai
IN000612.ai
14. Click [OK].
➔ When the image reading completes, the “Image Viewer” window opens.
➔ A listing of studies on the disk shows up.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-63
IN-64 16. After viewing the on-screen image, click
in the upper left corner
17. Click and hold on the horizontal scrollbar and drag it rightward to scroll.
of the window.
Click Since image reading occurs from the disc, the [Save/Verify] button becomes hidden from view.
➔ The system returns to the “Study List” window.
N000615.ai
IN000616.ai
* Check to make sure that the study item that has been output is shown on the study list and the other items being displayed such as the patient ID are correct.
18. Ensure that the image that has been read in is not falling under the heading “DB managing.”
Check here.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN000617.ai
IN-64
IN-65 19. Click
5.4 Checking Output Images (option)
located in the indicator field.
When the DICOM print option is installed, perform the following operations: Film annotation character format Format check Irregularity, sensitivity and density checks
Click
IN000618.ai
➔ The “Indicator” window opens.
20. Make sure that neither error nor warning is logged in the event tab.
IN000619.ai
21. Click [OK]. ➔ The “Indicator” window closes.
22. Remove the cassette from the RU. 020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-65
IN-66 ■ Checking the format (option)
■ Checking the film annotation character format
1.
Check to see that the film annotation character format information entered from the CR-IR 391CL is properly printed out onto film. Also, check for blurred, chipped, or otherwise abnormal character printings.
➥ REFERENCE The example in the figure below represents a printout that would be generated when the default film annotation character format is used (image size : 26×36cm (10"×14"), print format : Single). When the default settings are used, character strings (1) through (17) are printed out.
When the DICOM print option is installed, perform the following operations:
1.
Checking the image format As measured from the outermost outline of film that has been output, make certain that the width of the blank margin should measure 2 mm or smaller in actual dimension on the IP.
➟ PERFORMING A CHECK Ensure that the blank margin is 2 mm or less in width. If an irregularity is found, See “MT: Machine Troubleshooting” of the RU Service Manual.
(1) Hospital name (Institution name)
2mm or less
FUJIFILM HOSPITAL
0400167 6
A0000A020
Image frame
(12) IP No. (2) EDR mode + Menu code (3) System ID + Image No.
Blank margin
FRCH7102.EPS
(13) Image processing conditions L 4.0S200C 1.2 1.0AP
(10) Film mark (7) Sex (8) Age or Date of birth R->L
(9) Pair processing information (11) Reduction ratio
(14) Exposure menu name (17) Exposure time (16) Image inversion mark (6) Date of exposure (15) Standardization conditions + Correction item
Depending on the IP reading size and film size, distances measured on film differ from their counterparts actually measured on the relevant IP. Therefore, calculate actual dimensions on the IP on the basis of distances measured on the film and the reduction ratio of the film using the following equation: Actual dimension on the IP = Measured value
100 Reduction ratio (%)
IN000532.EPS
If any abnormality is found, see “6.4 Film Annotation Characters” under “MU: Maintenance Utility.”
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-66
IN-67 3.
■ Checking for nonuniformity, sensitivity and density
1.
Check that the output film and the image displayed on the CR-IR 391CL monitor are both free from peculiar irregularities. If any abnormality is found, see “MT: Machine Troubleshooting” of the RU Service Manual.
2.
Verify that there is no “unusual nonuniformity” found on the output film or on the image displayed on the image monitor.
➟ PERFORMING A CHECK There should be no uneven density difference in the main scan direction.
Check the system sensitivity (S value) indicated on the film that was output.
If there is any uneven density difference, compare the films output from the two IPs of the same size, and determine whether such nonuniformity is caused by the machine or X-ray tube.
For details of the procedure to check the S value, see “Checking the S Value” in “IN: Installation” of the RU Service Manual.
● If there is uneven density difference in the same direction on two films
➥ REFERENCE To check the S value on the monitor, take a look at the location shown below.
IP (first) in normal orientation IP (second) in vertically inverted orientation FRCH7100.EPS
Check this S value.
➔ The machine may be the cause of such nonuniformity. See “MT: Machine Troubleshooting” of the RU Service Manual.
● If positions of uneven density difference are different
IN000609.ai
IP (first) in normal orientation
IP (second) in vertically inverted orientation FRCH7101.EPS
➔ The X-ray tube may be the cause of such nonuniformity.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-67
IN-68
6. Setup File Backup and RU Error Log Verification/Deletion This section explains about the procedures for backing up the CR-IR 391CL and RU setup files and verifying/deleting the RU error log. When making backups, have the following items on hand. One DOS/V-formatted FD or USB Memory Stick (for RU) One DVD disk (for CR-IR 391CL)
NOTE Never turn OFF the CR-IR 391CL or RU power during a backup process. If the power turns OFF, the machine may fail to startup.
6.1 Backing Up the CR-IR 391CL Setup File 6.2 Backing Up the RU Setup File 6.3 Verifying and Deleting the RU Error Log 6.4 Turning OFF the CR-IR 391CL and RU
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-68
IN-69 6.1 Backing Up the CR-IR 391CL Setup File
2.
The tray of the DVD drive opens.
Back up patient information, setting information and log information.
■ Preparatory work Make sure that the writing of all image data to the image storage disk has been completed. Onto the case of the backup-purpose disk, affix its supplied label and clearly mark thereon the date of backup along with the description “For Backup Purposes.”
■ Disk removal
Click [Eject].
3.
Remove the disk. With the label side facing up, put the DVD back into its case labeled “Image storage disk.”
4.
Close the now-empty tray.
5.
Click [Update]. Only [Device Name] is shown while [Status], [Usage] and [Disk Write] become hidden from view.
This section describes the procedure to remove the image storage disk.
1.
Click
located in the upper-right corner of the Study List window.
icon_IN0602.ai
➔ The Indicator window (Disk) opens.
MUApp0002.ai
IN000620.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-69
IN-70 6.
7.
Click [OK]. The system returns to the [Study List] window.
Click [Close] in the upper-left corner of the Study List window.
➥ REFERENCE For V1.1(B) or later, click
at the bottom of the Main Window.
IN000633.ai
➔ The “[20339] Application will be terminated.” dialog shows up.
IN00062 .ai
IN000625.ai
8.
Click [OK]. ➔ The “Select Server Application Behavior” window opens.
9.
Select “Exit” and click [OK].
IN000634.ai
➔ The system returns to the desktop. 020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-70
IN-71 4.
■ Staring up the Backup Utility
1.
Right-click the icon representing the CR-IR 391CL server in the task tray at the bottom right of the desktop window.
Type in the username “medicalservice” and the password “fieldengineer” from the keyboard.
NOTES Both username and password are lower-case single-byte characters only, without including space. The username “medicalservice” must be typed in from the keyboard because it is not pre-registered on the pull-down menu.
IN000402.ai
➔ A right-click menu opens.
2.
Click [Backup Utility]. ➔ The following confirmation window opens.
MU000035.ai
5. MU000034.ai
3.
Click [OK]. ➔ The following “Main Menu” window opens.
Click [OK]. ➔ Upon system termination, the following “User authentication” window opens.
IN000635.ai MU000036.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-71
IN-72 6.
10. After making the following checks, click
Click [Backup].
to continue.
➔ The “Backup” window opens.
I.
IN000627.ai
I.
➔ The window to confirm the deletion of log information opens.
IN000626.ai
7.
Checkmark all the following items (
8.
➔
Make certain that Drive D is current. Ensure that the folder name is the date (in YYYYMMDDhhmmss format) on which the backup was performed.
).
Patient information Setting information Log information Delete logs after completing backup processing.
Click [Start]. ➔ The “Select folder.” window opens.
9.
MUApp0003.ai
Open the tray of the DVD drive and insert the backup-purpose disk.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-72
IN-73 14. Click [OK].
11. Click [OK]. ➔ The window to confirm the execution of disk formatting opens.
➔ The following window opens.
MU000045.ai
15. Click [OK]. ➔ The system returns to the format window. MUApp0004.ai
16. Click [Close]. ➔ Upon completion of the backup processing, the following completion window opens.
12. Click [OK]. ➔ The fotmat window opens.
MU000042.ai
17. Click [OK]. ➔ The system returns to the “Main Menu” window. MU000043.ai
18. Click [Finish].
13. Click [Start].
➔ The system returns to the “Select Server Application Behavior” window.
➔ The following window opens.
MU000044.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-73
IN-74 ■ Verification work to be performed after completion of a backup operation
1.
Select “Computer” from the
3.
In the “Select Server Application Behavior” window, select “Start up Client Application” and click [OK].
menu and double-click “DVD drive
(D:). And then check to make certain that the files shown on the following screen shot are stored.
IN000636.ai
➔ The login window opens.
4.
Log in using the password “fieldengineer.” ➔ The “Study List” window opens. For the procedure to log in, see “5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD.”
5.
Click
6.
Check to see that the list stored on the disk is displayed.
on
.
IN000629.ai
2.
Remove the backup disk from the DVD drive and insert the image storage disk.
N000630.ai
7.
Click
located in the indicator field.
➔ The system returns to the “Indicator” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-74
IN-75 8.
Make certain that Event has no error information recorded on it.
➔ The “[20339] Application will be terminated.” dialog shows up.
IN000625.ai
11. Click [OK]. ➔ The “Select Server Application Behavior” window opens.
12. Select “Exit” and click [OK].
IN000631.ai
9.
Click [OK]. ➔ The system returns to the “Study List” window.
10. Click [Close] in the upper-left corner of the Study List window.
IN000634.ai
➔ The “[29151] Server application will shut down.” dialog shows up.
➥ REFERENCE For V1.1(B) or later, click
at the bottom of the Main Window.
IN000637.ai
IN000633.ai
13. Click [OK]. ➔ The system returns to the desktop.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-75
IN-76 6.2 Backing Up the RU Setup File
3.
From [LIST OF EXISTING RU], select a target RU for backup.
This section explains about the procedure for making an FD (or USB Memory Stick) backup by saving the RU machine-specific data onto an FD (or USB Memory Stick) after the completion of setup.
1. 2.
[Select]
Insert an FD (or USB Memory Stick) into the CR-IR 391CL’s FDD (or USB connectors) . From the
RU NAME IP ADDRESS RU TYPE ru0 172.16.1.10 CR-IRxxx
In the “Run” window that opens, type “C:\Program Files\FujiFilm\FCR\ TOOL\RuPcTool\RuPCTool.exe” and click [OK].
RU TYPE CR-IRxxx: Model name of the RU to be connected is displayed.
#1 [Select]
4.
FRCH316A01.EPS
Click [FTP]. [Click]
#2 [Select]
#3 [Select]
FRCH316A02.ai
➔ For details about FTP, see the RU Service Manual.
5. #4 [Type in]
VERSION V1.0
From the “BACKUP” pull-down menu, select the items you want to back up. CONFIGURATION LOG ALL SCN ALL DATA
#5 [Click] [Select]
ERROR LOG CONFIGURATION TRACE LOG HISTORY LOG LOG ALL SCN ALL DATA SCN LIGHT COLLECTING DATA SCN OPTICAL DATA FRCH316A04.ai
FRCH7154.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-76
IN-77 6.
8.
Click [EXECUTE].
Make sure that the selected location is being displayed, click [OK]. #1 [Confirm] The selected location is displayed.
[Click]
FRCH316A03.ai
7.
#2 [Click]
Select a backup destination folder.
NOTE If and when you back up data to an FD, load a formatted FD into the CR-IR 391CL. This is because it is impossible to select the FD drive (a:\) unless an FD is being loaded in the drive. #1 [Click]
FRCH316A10.ai
9.
Check the backup destination location again, and click [OK]. #2 [Click]
#1 [Confirm]
FRCH316A06.ai
10. When the backup completion window opens, click [OK]. NOTE #2 [Select]
If the data has been backed up to an FD, make sure to click [OK] before taking out the FD. [Click] FRCH316A09.ai
FRCH316A05.ai
11. Click the
button on the upper-right corner of the window.
➔ The system returns to the desktop
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-77
IN-78 3.
6.3 Verifying and Deleting the RU Error Log
Click [UPDATE].
6.3.1 Verifying the RU Error Log By illustrating a case of viewing the latest error log, the procedure is described below.
1.
Select an RU under “LIST OF EXISTING RUs” in the main menu of the RU PC-TOOL. RU NAME IP ADDRESS RU TYPE ru0 172.16.1.10 CR-IRxxx
VERSION V1.0 The latest error log is added to the end of the list.
RU TYPE CR-IRxxx: Model name of the RU to be connected is displayed.
2.
FRCH4414.EPS
Click [ERROR DB].
FRCH4434.ai
FRCH4433.ai
➔ The “ERROR DB” window opens.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-78
IN-79 6.3.2 Deleting the RU Error Log
1.
Start up the RU PC-TOOL, and in the “ERROR DB” window that opens, click the [CLEAR] button.
2.
Exit the RU PC-TOOL.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-79
IN-80 6.4 Turning OFF the CR-IR 391CL and RU ● Turning OFF the CR-IR 391CL form the Study List Window
1.
● Turning OFF the CR-IR 391CL form the Task Tray
1.
Right-click the CR-IR 391CL server icon on the task tray in the bottomright corner of the desktop window.
Click [Close] in the upper-left corner of the Study List window. ➔ The “[20339] Application will be terminated.” dialog shows up.
IN000402.ai
➔ Its right-click menu opens.
IN000625 ai
2.
IN000638 ai
2.
Click [OK]. ➔ The “Select Server Application Behavior” window opens.
3.
Select “Shutdown the PC”. ➔ The “[29151] Server application will shut down.” dialog shows up.
Select “Shutdown the PC” and click [OK]. ➔ The “[29151] Server application will shut down.” dialog shows up.
IN000637.ai
IN000637 ai
4.
Click [OK].
5.
Turn OFF the RU power.
020-221-02E 01.08.2010 FM5563
3.
Click [OK].
4.
Turn OFF the RU power.
CR-IR 391CL Service Manual
IN-80
IN-81
7. Links to Individual Option Items Shown below are the appendixes to see when additionally installing options and/or making setting changes:
■ Setting for saving images into DICOM storage equipment See “Appendix 1: Settings for Saving Images into DICOM Storage Equipment” in “Appx IN: Installation – Appendix”.
■ Settings for Connection of the NAS See “Appendix 2: Settings for Connection of the NAS” in “Appx IN: Installation – Appendix”.
■ Setting a DICOM MWM Patient information See “Appendix 3: Setting a DICOM MWM Patient information” in “Appx IN: Installation – Appendix”.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
IN-81
IN-82 BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
IN-82
Appx IN I
CR-IR 391CL Service Manual
Appx IN: Installation – Appendix
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN I
Appx IN II
Appx IN: Installation – Appendix
Control Sheet Issue date
Revision number
04/28/2008 01/08/2010
01 02
020-221-02E 01.08.2010 FM5563
Reason New release (FM5535) Revision for software V1.1(B) (FM5563)
Pages affected All pages Appx IN 1-2, 3, 7, 9, 2-1 to 36, 3-1 to 8
CR-IR 391CL Service Manual
Appx IN II
Appx IN III BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx IN III
Appx IN IV BLANK PAGE
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx IN IV
Appx IN 1-1
Appendix 1 Settings for Saving Images into DICOM Storage Equipment This appendix describes the setup procedure for saving images into DICOM storage equipment.
■ Before setup Make sure the setup of the DICOM storage equipment has been completed. Make sure the setup of the CR-IR 391CL main unit has been completed. A DICOM storage output key is required.
■ Overall workflow 1. Hardware Setup
2. Software Setup 2.1 Installing the Option Key 2.2 Reinstalling the AP Key 2.3 Settings in the Service Utility 2.3.1 Settings Regarding This Equipment (DICOM storage SCU settings) 2.4 Changing the Display Gradation Correction LUT File
1. Hardware Setup Connect the CR-IR 391CL and the DICOM storage equipment through TCP/IP networking as illustrated below. 100BASE-TX cable TCP/IP
CR-IR 391CL
DICOM storage equipment INAppQ0001.EPS
NOTES Do not connect a telephone line to the network connector on the CR-IR 391CL system. Cables used for connection to the CR-IR 391CL system should be of the type compliant with the IEC950/UL1950 standards.
3. Connection Check
4. Backing Up the Setup File
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 1-1
Appx IN 1-2
2. Software Setup
2.1 Installing the Option Key The “Saving to DICOM storage device” option key is required.
2.1 Installing the Option Key
2.2 Reinstalling the AP Key
2.3 Settings in the Service Utility 2.3.1 Settings Regarding This Equipment (DICOM storage SCU settings)
NOTE When the option key and/or the application key is to be installed, it is required that the CR-IR 391CL is connected to the network. Make sure that network connection has been established before performing the installation.
1.
Insert an option key CD into the DVD drive.
2.
Double-click DVD drive (D:).
2.4 Changing the Display Gradation Correction LUT File
➔ The installation start window opens.
INAppE0002.ai
3.
Click [Continue]. ➔ A window opens to indicate the completion of installation
INAppE0003.ai
4.
Click [OK]. ➔ The system returns to the desktop screen.
5. 020-221-01E 04.28.2009 FM5535
Remove the CD from the DVD drive.
CR-IR 391CL Service Manual
Appx IN 1-2
Appx IN 1-3 2.2 Reinstalling the AP Key Once you have installed the option key, be sure to reinstall the AP key. Reinstall the AP key using the AP key CD. The installation procedure is as follows:
1.
Insert the AP key CD into the DVD drive.
2.
Double-click DVD drive (D:).
2.3 Settings in the Service Utility 2.3.1 Settings Regarding This Equipment (DICOM storage SCU settings) This section shows the procedures of making DICOM equipment settings. This section describes how to make settings on this equipment regarding the DVD drive, the DICOM Print option, and DICOM storage.
■ Items that can be set in the “DICOM settings” window Name
➔ The installation start window opens.
Description
Setting value
Media Storage Setting
INAppE0004.ai
3.
Click [Continue]. ➔ A window opens to indicate the completion of installation.
AE name (I.)
Name for identification purposes Input method: typed-in text when the DICOM protocol is used. Maximum character count: It should be “MEDIA.” 16 characters
Maximum pixel density size for a stored image (II.)
Maximum pixel density size of images that are stored in the disk drive for management.
Input method: Single selection ST HQ
Whether or not to specify data compression for stored images (III.)
Whether images should be in a compressed form or not when stored on the disk drive for management.
Input method: Single selection Compress. Do not compress.
Setting multi-byte character (IV.)
Whether or not to store additional Input method: Single selection (attendant) information in multibyte On: Store. characters, if any, on the media. Off: Do not store.
Print SCU setting AE name (V.)
Name for identification purposes Input method: typed-in text when the DICOM protocol is used. Maximum character count: It should be “FCR-CSL.” 16 characters
Timeout value (VI.)
Timeout value at the command level.
Presentation Context (VII.)
Setting of abstract syntaxes being Input method: multiple selection used. BasicGrayscalePrint: Not selectable and fixed to Yes. Verification: Yes/No
INAppE0005.ai
4.
Click [OK]. ➔ The system returns to the desktop screen.
5.
Remove the CD from the DVD drive.
020-221-02E 01.08.2010 FM5563
Input method: typed-in text Acceptable characters: single-byte numeric characters Value range: 1 to 3600
Setting for Storage SCU AE name (VIII.)
Name for identification purposes Input method: typed-in text when the DICOM protocol is used. Maximum character count: It should be “FCR-CSL.” 16 characters
Timeout value (IX.)
Timeout value at the command level.
CR-IR 391CL Service Manual
Input method: typed-in text Acceptable characters: single-byte numeric characters Value range: 1 to 3600
Appx IN 1-3
Appx IN 1-4 ■ Setting procedure
1.
5.
Select the [Settings for Storage SCU] tab.
Start up the Service Utility. ➔ The “Service Utility top” window opens.
2.
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
VIII. Enter the AE name “FCR-CSL.” IX. Enter the value “300” for the timeout between DICOM messages by typing from the keyboard or by clicking the or .
7.
Click [OK]. ➔ The system returns to the “Server equipment settings” window.
8.
Click [OK]. ➔ The system returns to the “Setting connection devices” window.
9.
Click [Back]. ➔ The system returns to the “Service Utility top” window.
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx IN 1-5
Appx IN 1-6 2.4 Changing the Display Gradation Correction LUT File
3.
Click the “View” tab. ➔ A window like that shown below opens.
Described herein is the procedure used to change LUT files so that the display gradation correction processing is performed when transmitting images to DICOM storage devices.
NOTE When transmitting FCR images to storage devices, the CR-IR 391CL system uses a gradation correction LUT file named “DICOMStorageLUT.env”. To change the “DICOMStorageLUT.env” file to a different gradation correction LUT file, do so following the procedure explained below.
■ Preparatory work (folder option change) In the CR-IR 391CL system, the folder where LUT files are located is set up in hidden folders. Because such hidden folders are not displayed with the default settings, it is necessary to have all those folders be displayed properly before starting the relevant work. After completing the necessary work, the folder where an LUT file is located must be set up again in a hidden folder.
INAppU0001.ai
4.
NOTE
➔ The selected item will be highlighted.
Prior to starting the necessary preparatory work, ensure that the CR-IR 391CL server application has been exited. If such work is performed while the CR-IR 391CL server application is running, the CR-IR 391CL operation will go unstable.
1.
Select “Control Panel” from the
Select [ Show hidden files and folders] from “Files and Folders” in the “Advanced settings:” field.
menu.
➔ The “Control Panel” window opens.
2.
Double-click [Folder Options]. ➔ The “Folder Options” window opens.
INAppU0002 .ai
5.
Click [OK]. ➔ The system returns to the “Control Panel” window.
6. 020-221-01E 04.28.2009 FM5535
Click
at the upper right corner of the window to close it.
CR-IR 391CL Service Manual
Appx IN 1-6
Appx IN 1-7 ■ Changing the LUT file In the CR-IR 391CL system, “DicomStorageLUT.env” is stored as the DICOM Storage output LUT file (10bit) in the folder shown below. Replace this file for the gradation conversion LUT file that has been readied appropriately.
1. 2.
Rename the readied gradation conversion LUT file to “DicomStorageLUT.env”. Replace the LUT file renamed at step above for “DicomStorageLUT. env” that is located in the folder shown below. Location for copying : C:\ProgramData\FujiFilm\Hobbit\Lut Filename : DicomStorageLUT.env
■ Changing the folder option Restore as follows the folder options settings changed during the preparatory work.
1.
Select “Control Panel” from the
menu.
➔ The “Control Panel” window opens.
2.
Double-click [Folder Options]. ➔ The “Folder Options” window opens.
3.
Click the “View” tab. ➔ A window like that shown below opens.
INAppU0003.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx IN 1-7
Appx IN 1-8 4.
Select [ Do not show hidden files and folders] from “Files and Folders” in the “Advanced settings:” field.
INAppU0004.ai
5.
Click [OK]. ➔ The system returns to the “Control Panel” window.
6.
Click
020-221-01E 04.28.2009 FM5535
at the upper right corner of the window to close it.
CR-IR 391CL Service Manual
Appx IN 1-8
Appx IN 1-9
3. Connection Check
■ Outputting images to storage devices
1.
■ Preparatory work
For details of patient data input operation, see the CR-IR 391CL Operation Manual.
This section describes the procedures to perform setup as to whether or not Automatic Output is enabled and also make setting of an output timing value. For more information on how to make settings, see “Appendix 4: Settings for Automatic Output” in “MU: Maintenance Utility.”
➥ REFERENCE
In the patient information input window, specify patient data and an exposure menu.
2.
On the “Study List” window, select a registered study and then click [Start Study]. ➔ The “Start Study” window opens.
To perform display gradation correction processing for an image to be transmitted to a storage device, the relevant LUT file needs to be changed accordingly. For detailed procedure, see “2.4 Changing the Display Gradation Correction LUT File” in “Appx IN: Installation – Appendix.”
■ Starting up the CR-IR 391CL
1.
On the desktop screen, double-click the
icon.
➔ The CR-IR 391CL opening window appears. In about one minute, the CR-IR 391CL login window opens.
2.
Log in the system. ➔ The Study List window opens. For information on how to log in to the CR-IR 391CL, see “■ Preparatory work (login)” in “5.3 Checking Every Step from the Inputting of Images to the Saving of Images onto DVD” of “IN: Installation.” IN000227.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 1-9
Appx IN 1-10 3.
Making sure that the cassette loading lamp on the RU panel is illuminating, load a cassette into the cassette set unit of the RU.
4.
Click
in the bottom-right corner of the CR-IR 391CL window.
➔ The “Study List” window opens.
5.
Perform the following operation: ● In the case of automatic output
Cassette Ready lamp [illuminating]
I.
Click
in the upper-right corner of the window.
➔ The Indicator window opens. II. Click the [Output status] tab. ➔ The output status is displayed. FRCH101006.ai
➔ In a while after the reading from the IP has started, the image read into the CR-IR 391CL monitor is displayed.
III. Check to see that there is no queue left. IV. Check to see that the image is now stored on the DICOM storage equipment.
● In the case of manual output
I.
II.
INAppxQ0004.ai
IN000226.ai
020-221-01E 04.28.2009 FM5535
I. In the study display area, select a study you want to output. II. Click [DICOM Transmission]. ➔ The “Settings for DICOM Transmission” window opens.
CR-IR 391CL Service Manual
Appx IN 1-10
Appx IN 1-11 III. Make the following settings:
VII. After the image transfer, check to see that there is no queue left. VIII. Check to see that the image is now stored on the DICOM storage equipment.
NOTE Make sure after data transfer that the image stored on the DICOM storage equipment is displayed appropriately.
INAppxQ0005.ai
Item Priority
Description HIGH : High priority MEDIUM : Medium priority LOW : Low priority
IV. Click [Output]. V. Click
in the upper-right corner of the window.
➔ The Indicator window opens. VI. Click the [Output status] tab. ➔ The output status is displayed.
INAppxQ0006.ai
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx IN 1-11
Appx IN 1-12
4. Backing up the Setup File Back up the CR-IR 391CL setup file. For details of the backup procedure, see “6.1 Backing Up the CR-IR 391CL Setup File” under “IN: Installation.”
020-221-01E 04.28.2009 FM5535
CR-IR 391CL Service Manual
Appx IN 1-12
Appx IN 2-1
Appendix 2 Settings for Connection of the NAS Described herein is the setup procedures required for connection with NAS.
NOTE Actual procedures may differ because the NAS is procured by the FUJIFILM representative according to the specified specification.
■ Turning ON/OFF the NAS See “5. Turning ON/OFF the NAS”
■ Mirroring Setting for Image Folder See “6. Mirroring Setting for Image Folder”
■ Restoring Procedures Using the Automatic Backup File See “7. Restoring Procedures Using the Automatic Backup File”
In that case, qury the FUJIFILM representative about the procedures.
■ Before setup Make sure the setup of the CR-IR 391CL main unit has been completed.
■ Overall workflow Connecting the CR-IR 391CL and the NAS with each other via the hub, using a network cable.
“1. Hardware Setup”
Make network setting and service utilities setting for NAS.
“2. Software Setup”
Check up that the NAS is correctly connected to the computer.
Can be set manually (There are types which can only be used with DHCP.)
File sharing
Windows file sharing
NOTE
Supported OS
Windows XP / Windows Vista / Windows Server 2003
Auto Sync is used for mirroring the “Image” folder. (Described later)
Number of concurrently connected users
5 or more
This software can be got from following web site.
Number of concurrently connected PCs
5 or more
TS-WX2.0TL/R1 : manufactured by Buffalo, capacity: 2.0TB, RAID1 compatibility
■ AutoSync Auto Sync V3.60
http://www.memeo.com/autosync.php
1.1.2 RAID Item Level
020-221-02E 01.08.2010 FM5563
Contents RAID1 (mirroring)
CR-IR 391CL Service Manual
Appx IN 2-2
Appx IN 2-3 1.2 Installing hardware 1.2.1 TeraStation
1.
Connect the power plug of the TeraStation to UPS.
2.
Connect the TeraStation and hub with the LAN cable.
3.
Turn on the power supply switch on the front of the TeraStation.
NOTE It is recommended that the electric power is supplied to NAS through UPS.
1.2.2 LinkStation
1.
Connect the power plug of the LinkStation to UPS.
2.
Connect the LinkStation and hub with the LAN cable.
3.
Turn on the power supply switch on the front of the LinkStation.
NOTE It is recommended that the electric power is supplied to NAS through UPS.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-3
Appx IN 2-4
2. Software Setup 2.1 Installation procedures for TeraStation (TS-WX1.0TL/R1 and TS-WX2.0TL/R1) 2.1.1 Network Setting 2.1.2 TeraStation RAID Setting 2.1.3 Shared Folder Setting 2.1.4 Confirming Connection between TeraStation and CR-IR 391CL
2.2 Installation Procedures for LinkStation (LS-WH1.0TGL/R1 and LS-WH2.0TGL/R1) 2.2.1 Network Setting 2.2.2 LinkStation RAID Setting 2.2.3 Shared Folder Setting 2.2.4 Confirming Connection between LinkStation and CR-IR 391CL
2.1 Installation procedures for TeraStation (TS-WX1.0TL/R1 and TS-WX2.0TL/R1) 2.1.1 Network Setting
■ Installing NAS Navigator2 NOTE Install NAS Navigator2 after turning off the UAC. For details, see “■ Setting the User Account Control” in “1.3.1 Installing and Setting Windows Vista” under “MC: Checks, Replacement and Adjustment of Parts” See the screens. For details, refer to the user manual that comes with the NAS you purchased. Do not install unnecessary software other than NAS Navigator2.
2.3 Setting in the Service Utility
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-4
Appx IN 2-5 1.
Insert a CD that comes with the TeraStation, and double-click D drive.
2.
Click [NAS NAvigator2 Install]. ➔ The following window opens.
NOTE When it does not start automatically, open the drive and execute TSNavi.exe.
INApp19051.ai
3.
Click [install]. ➔ The following window opens.
INApp19048.ai
➔ The main window opens.
INApp19052.ai
4.
Click [Next]. ➔ The “Congratulations!“ window opens.
INApp19049.ai
INApp19053.ai
5.
Click [Finish] ➔ Terminate TSNavi.exe.
NOTE Turn the UAC back ON after completing the installation for NAS Navigator2.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-5
Appx IN 2-6 ■ Temporarily match the network segment between TeraStation and CR-IR 391CL
3.
Right-click “Local Area Connection” and select “Properties”, select Internet Protocol Version 4 (TCP/IPv4), and click [Properties].
NOTE In case of the NAS icon is not displayed after double-clicking the NAS Navigator2 icon, temporarily matching of network segment of TeraStation and CR-IR 391CL is needed. In that case, perform this section and “ ■ Restoring the network setting of the CR-IR 391CL”.
INApp19104.ai
1.
Check the IP address of the current TeraStation. I.
Start up NAS Navigator2 by clicking the “BUFFALO NAS Navigator” icon on the desktop. II. Make a note of “IP Address” and “Subnet Mask” of the NAS, that are displayed on the screen.
INApp19107.ai
4.
Change the IP address and subnet mask of the PC so that NAS and CR-IR 391CL are in the same network segment. [Ex.] Before changing CR-IR 391CL
INApp19105.ai
NAS
III. Terminate NAS Navigator2.
2.
Click “Control Panel” ➔ “Network and Sharing Center” ➔ “Manage network connections” to open the “Network Connection” window.
After changing
IP address
172.16.1.20
169.254.160.210
Subnet mask
255.255.255.0
255.255.0.0
IP address
169.254.163.179
169.254.163.179
Subnet mask
255.255.0.0
255.255.0.0
5.
Click [OK] to close the Properties window.
6.
Close the Local Area Connection Properties window.
7.
Close the Network Connection window.
8.
Close the Network and Sharing Center window.
INApp19106.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-6
Appx IN 2-7 4.
■ Setting the IP address of the TeraStation
1.
2.
Enter the following value, and click [OK]. Item
Double-click the icon on the desktop screen to start up the NASNAvigator2.
Right-click the icon of the TeraStation, and select “Properties”.
Setting
I.
Obtain IP address automatically via DHCP
remove the checkmark
II.
Renew IP address
remove the checkmark
III.
IP Address
(Ex.) 172.16.1.80 (match this to the network segment of the CR-IR 391CL)
IV. Subnet Mask
(Ex.) 255.255.0.0 (match this to the network segment of the CR-IR 391CL)
V.
0.0.0.0 (Enter 0 to all)
Default Gateway
I. II. III. IV. V.
INApp19098.ai
➔ The “Properties” window opens.
3.
Select the “IP Settings” tab in the “Properties” window. ➔ The following window opens. INApp19111.ai
➔ The “Confirm Password” window opens.
5.
Enter the following password, and click [OK]. Password : password
INApp19112.ai INApp19110.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-7
Appx IN 2-8 6.
If the following window opens, close it by clicking the the right top of the window.
button on
■ Restoring the network setting of the CR-IR 391CL NOTE In case of “ ■ Temporarily match the network segment between TeraStation and CR-IR 391CL” has been done, perform this section.
1.
Turn back the value of the IP address and the subnet mask to the value before changing them in “ ■ Temporarily match the network segment between TeraStation and CR-IR 391CL”.
INApp19113.ai
7.
When the following dialog opens, click [No] to close it.
INApp19114.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-8
Appx IN 2-9 3.
2.1.2 TeraStation RAID Setting
Select “System” ➔ “Storage” ➔ “RAID Array” from the menus on the upper side of the window.
■ Changing the RAID setting of the TeraStation to the normal mode Temporarily delete the RAID mode that is already set.
1.
Right-click the TeraStation icon, and select “Open Web Admin”.
INApp19062.ai
2.
Enter the following user name and password to log in to the Web setting window. Username : admin
Make the following settings, and click [Create Raid Array]. I. RAID Mode : Select raid1 II. Place checkmarks to Disk1 and Disk2 (Or, select HDDs that are to be used for RAID1. Ex: Disk3 and Disk4)
Enter the same number as the displayed one in the window, and click [Apply].
NOTE While configuring RAID for several hours (approx. 6hours for 1TB), file transfer speed to NAS decreases. While configuring RAID, the INFO/ERROR lamp on the front side of the LinkStation/TeraStation flashes orange. If you turn OFF NAS while it is configuring, the configuring process is interrupted. When the power is turned on again, configuring will resume from where it was interrupted.
I. II.
(Ex.) When you turn OFF the 1TB LinkStation after configuring RAID for 3hours ➔ RAID configuring resumes the next time the power is turned on and it will take 3 more hours to process.
INApp19072.ai
➔ The Warning dialog opens.
➔ The changing process of the RAID Array starts.
INApp19073.ai
6.
Click [Apply]. ➔ The [RAID Array operation] window opens. INApp19067.ai
8.
After completion of the changing process, click the [Refresh] button to return to the main screen.
INApp19074.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-12
Appx IN 2-13 4.
2.1.3 Shared Folder Setting
1.
Right-click the TeraStation icon, and select “Open Web Admin”.
Make the following settings, and click [Save]. I. Name : FujiFilm II. Volume : Array 1 III. Recycle Bin : Disable
INApp19062.ai
I.
2.
Enter the following user name and password to log in to the Web setting window.
II. III.
Username : admin Password : password
INApp19078.ai
➔ The system returns to the main screen. INApp19060.ai
3.
Select “Shared Folders” ➔ “Folder Setup” from the menus on the upper side of the window. ➔ The “New Folder” setting window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-13
Appx IN 2-14 2.1.4 Confirming Connection between TeraStation and CR-IR 391CL
1.
Select “Network” from the “Start” menu. ➔ The “Network” window opens.
2.
Confirm that the shared folder of the TeraStation (“FujiFilm”) is included in the configuration.
INApp19081.ai
3.
Confirm that the FujiFilm folder can be opened.
INApp19080.ai
After finishing setup of the TeraStation, continue setup procedure referring “2.3 Setting in the Service Utility”.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-14
Appx IN 2-15 2.2 Installation Procedures for LinkStation (LS-WH1.0TGL/R1 and LS-WH2.0TGL/R1)
■ Temporarily match the network segment between LinkStation and CR-IR 391CL
2.2.1 Network Setting
NOTE
■ Installing NAS Navigator2
When the CR-IR 391CL and NAS are not in the same network segment, the following “Web setting” cannot be started up. Therefore, temporarily change the network segment of CR-IR 391CL to the segment of LinkStation.
1.
Install NAS Navigator2 referring the manual attached to the LinkStation.
1.
I.
Start up NAS Navigator2 by clicking the “BUFFALO NAS Navigator” icon on the desktop. II. Make a note of “IP Address” and “Subnet Mask” of the NAS, that are displayed on the screen. III. Terminate NAS Navigator2.
NOTE Install NAS Navigator2 after turning off the UAC. For details, see “■ Setting the User Account Control” in “1.3.1 Installing and Setting Windows Vista” under “MC: Checks, Replacement and Adjustment of Parts” See the screens. For details, refer to the user manual that comes with the NAS you purchased.
Check the current IP address of the LinkStation.
2.
Click “Control Panel” ➔ ”Network and Sharing Center” ➔ “Manage network connections” to open the “Network Connection” window.
Do not install unnecessary software other than NAS Navigator2. After Installation finished, following icon will be created on the desktop.
INApp19095.ai
NOTE Turn the UAC back ON after completing the installation for NAS Navigator2.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-15
Appx IN 2-16 3.
Right-click “Local Area Connection” and select “Properties”.
4.
Select Internet Protocol Version 4 (TCP/IPv4), and click [Properties].
5.
Change the IP address and subnet mask of the PC so that NAS and CR-IR 391CL are in the same network segment.
■ Setting the IP address of the LinkStation
1.
Double-click the icon on the desktop screen to start up the NAS Navigator2.
2.
Right-click the LinkStation icon, and select “Open Web setting”.
[Ex.] Before changing CR-IR 391CL
NAS
After changing
IP address
172.16.1.20
169.254.160.210
Subnet mask
255.255.255.0
255.255.0.0
IP address
169.254.163.179
169.254.163.179
Subnet mask
255.255.0.0
255.255.0.0
INApp19116.ai
3.
Enter the following user name and password to log in to the Web setting window. Username : admin Password : password
INApp19095.ai
6.
Click [OK] to close the Properties window.
7.
Close the Local Area Connection Properties window. INApp19099.ai
8.
Close the Network Connection window.
9.
Close the Network and Sharing Center window.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-16
Appx IN 2-17 4.
Select “Network” ➔ “IP Address Properties” from the menus on the left side of the window
■ Restoring the network setting of the CR-IR 391CL
1.
Turn back the value of the IP address and the subnet mask to the value before changing them in “■ Temporarily match the network segment between LinkStation and CR-IR 391CL”.
2.
Start up the NAS Navigator2 and confirm the IP Address of LinkStation is correctly changed.
3.
Confirm the network connection from PC to NAS using “ping” comand from command prompt.
INApp19100.ai
5.
Make the following settings, and click [Apply]. Item
Setting
Automatic via DHCP
Disable
IP Address
172.16.1.80
Subnet Mask
255.255.0.0
Default Gateway Address
None
Primary DNS Server Address
None
Secondary DNS Server Address
None
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-17
Appx IN 2-18 2.2.2 LinkStation RAID Setting
■ Changing the RAID setting of the LinkStation to “RAID1”
■ Changing the RAID setting of the LinkStation to the normal mode Temporarily delete the RAID mode that is already set.
1.
Right-click the LinkStation icon, and select “Open Web setting”.
2.
Enter the following user name and password to log in to the Web setting window. Username : admin Password : password
3.
1.
Log in to the Web setting window.
2.
Select “Disk Management” ➔ “RAID Setup” from the menus on the left side of the window.
3.
Select “RAID Array 1”. ➔ The RAID setting window opens.
4.
Make the following settings, and click [Create Raid Array]. Item
Select “Disk Management” ➔ “RAID Setup” from the menus on the left side of the window.
Setting
RAID Mode
RAID 1
Disk Structure
Select disks to use for RAID1 (Disk1 and Disk2 or Disk3 and Disk4).
➔ The changing process of the RAID Array starts.
NOTE While configuring RAID for several hours (approx. 6hours for 1TB), file transfer speed to NAS decreases. While configuring RAID, the INFO/ERROR lamp on the front side of the LinkStation/TeraStation flashes orange. If you turn OFF NAS while it is configuring, the configuring process is interrupted. When the power is turned on again, configuring will resume from where it was interrupted. (Ex.) When you turn OFF the 1TB LinkStation after configuring RAID for 3hours INApp19101.ai
4.
Select “RAID Array 1”. ➔ The RAID setting window opens.
5.
Delete all of the RAID Array settings.
6.
Close the RAID setting window.
020-221-02E 01.08.2010 FM5563
➔ RAID configuring resumes the next time the power is turned on and it will take 3 more hours to process.
5.
After the completion message appeared, operate following the guidance.
CR-IR 391CL Service Manual
Appx IN 2-18
Appx IN 2-19 4.
2.2.3 Shared Folder Setting
Make the following settings, and click [Apply]. Item
1.
Log in to the Web setting window.
2.
Select “Shared Folders” ➔ “Shared Folder Setup” from the menus on the left side of the window.
Setting
Shared Folder Name
FujiFilm
Volume
Array 1
Recycle Bin
Disable
INApp19102.ai
3.
Click [Add].
INApp19103.ai
➔ The system returns to the main screen.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-19
Appx IN 2-20 2.2.4 Confirming Connection between LinkStation and CR-IR 391CL
1.
Select “Network” from the “Start” menu.
2.
Confirm that the shared folder of the LinkStation (“FujiFilm”) is included in the configuration.
3.
Confirm that the FujiFilm folder can be opened.
After finishing setup of the LinkStation, continue setup procedure referring “2.3 Setting in the Service Utility”.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-20
Appx IN 2-21 2.3 Setting in the Service Utility 1.
5.
Start the Service Utility. ➔ The “Service Utility top” window opens.
2.
I.
Equipment name : Optional
II.
Network path : Click [Browse], and select the FujiFilm folder in the NAS.
III.
Network drive : Optional
IV.
After setting for [Network drive], click [Configuration].
➔ Capacity of the specified drive is displayed in the [Maximum capacity] text box and at the right side of the text box. V. Maximum capacity : Optional (Specify capacity of NAS to be used by the CR-IR 391CL.)
Click [Connected equipment]. ➔ The “Setting connection devices” window opens.
3.
Make the following settings, and click [OK].
Click [HDD]. ➔ The “Image save settings” window opens.
4.
I.
Place a checkmark to “Save the image to your hard disk”, and click [Add].
II. III. IV. V.
INApp19004E.ai
6.
Terminate the Service Utility.
INApp19001E.ai
➔ The NAS setting window opens.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-21
Appx IN 2-22
3. Connection Check
3.2 Confirming Connection between TeraStation and CR-IR 391CL
3.1 Confirming Connection between LinkStation and CR-IR 391CL (Access to the Network Drive) 1.
1.
Start up the CR-IR 391CL Server Application, and display the Indicator.
2.
Click the NAS icon.
Select “Computer” from the “Start” menu.
INApp19044.ai
➔ The “Computer” window opens
2.
➔ The Disk window in the Indicator opens.
3.
Confirm that the FujiFilm folder can be opened.
Confirm that the status of NAS and Disk Write are displayed.
INApp19045.ai
INApp19043.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-22
Appx IN 2-23 REFERENCE NAS and DVD can be switched from “Device Name”.
INApp19117.ai
“Enable images stores in HDD” is added to “System” in the Service Utility. This setting is synchronized with the [Connected Equipment] ➔ [HDD] ➔ [Save the image to your hard disk] checkbox. When a checkmark is placed, the setup value becomes Yes, and when not, the setting value becomes No.
INApp19118.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-23
Appx IN 2-24
4. Backing up the Setup File Back up the CR-IR 391CL setup file. For details of the backup procedure, see “6.1 Backing Up the CR-IR 391CL Setup File” under “IN: Installation.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-24
Appx IN 2-25
5. Turning ON/OFF the NAS In the normal operation, NAS has to be turned ON before starting up the Server PC. Turn ON/OFF the NAS with either one of the 2 kinds of procedures. However, backup of the log/setting file may fail because of the operational mistakes in the manual turning. Therefore, making it always ON is recommended.
NOTE When Auto is selected on the backside switch, power of the NAS is turned ON/OFF synchronizing with the Server PC. However, the CR-IR 391CL might not recognize the NAS because it takes time to start up the NAS. Therefore, do not set the backside switch to Auto.
5.2 Manual ON/OFF ■ In case of TeraStation ● Startup
1.
Set the backside switch to Manual.
2.
Turn on the power supply switch on the front of the TeraStation.
3.
Start up the Server PC.
● Stop
5.1 Always ON ■ In case of TeraStation
1.
Set the backside switch to Manual.
2.
Always make the TeraStation ON regardless of ON/OFF of the Server PC.
■ In case of LinkStation
1.
Always set the backside switch to ON regardless of ON/OFF of the Server PC.
020-221-02E 01.08.2010 FM5563
1.
Shut down the Server PC.
2.
Confirm that the Server PC completely stops, and then turn the backside switch of the LinkStation to OFF.
■ In case of LinkStation ● Startup
1.
Set the backside switch to ON.
2.
Start up the Server PC.
● Stop
1.
Shut down the Server PC.
2.
Confirm that the Server PC completely stops, and then turn the backside switch of the LinkStation to OFF.
CR-IR 391CL Service Manual
Appx IN 2-25
Appx IN 2-26
6. Mirroring Setting for Image Folder 6.1 Creating a Save Destination Folder Add a shared folder in the TeraStation.
6.2 Synchronization Function Setting ■ Installing Memeo AutoSync
1.
Create a shared folder in the TeraStation with the same procedure as “2.1.3 Shared Folder Setting”. Shared folder name: Image_Mirror For details, see “2.1.3 Shared Folder Setting”.
Execute
.
➔ The Security Warning dialog appears.
2.
Click [Run].
NOTE Install AutoSync after turning off the UAC. For details, see “■ Setting the User Account Control” in “1.3.1 Installing and Setting Windows Vista” under “MC: Checks, Replacement and Adjustment of Parts”
INApp19082.ai
➔ The Setup Wizard starts up.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-26
Appx IN 2-27 3.
5.
Click [Next].
Click [Finish].
INApp19085.ai
INApp19083.ai
➔ The ”Memeo AutoSync” shortcut is created on the desktop.
➔ The “License agreement” window opens.
4.
NOTE
Click [I Agree].
Turn the UAC back ON after completing the installation for AutoSync.
INApp19084.ai
➔ The installation starts.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-27
Appx IN 2-28 4.
■ Synchronization function setting
Specify the following folder for “Folder A”. c:\FujiFilm\Hobbit\Data\Image
1.
Double-click
2.
Click “Memeo AutoSync” ➔ “Create Sync Plan”.
on the desktop.
INApp19088.ai
5.
Specify the shared folder, “Image_Mirror“ created in “6.1 Creating a Save Destination Folder” for “Folder B”.
INApp19086.ai
3.
Click [Next].
INApp19089.ai
INApp19087.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-28
Appx IN 2-29 6.
8.
Click [Next].
Enter an arbitrary name for “Enter Sync Plan Name” and click [Next]. (Ex.) Image Mirroring
➔ The confirmation window opens.
INApp19091.ai
INApp19090.ai
7.
Click [Next]. ➔ A window to enter a name for Sync Plan opens.
9.
Remove the checkmark form “Yes, send my configuration information”, and click [Done].
INApp19092.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-29
Appx IN 2-30 10. Click the
6.3 Mirroring between NAS
to close the window.
In dual TeraStation configuration, data of the first TeraStation can be backed up in the 2nd TeraStation. Create a shared folder in the 2nd NAS, and the FujiFilm folder and Image_Mirror folder in the 1st TeraStation can be mirrored with the same procedures in “6.2 Synchronization Function Setting”.
INApp19093.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-30
Appx IN 2-31
7. Restoring Procedures Using the Automatic Backup File
■ Deleting the Sync Plan
1.
When NAS is connected, setting and log files are automatically saved in the NAS at the time of terminating the CR-IR 391CL. Here, procedures are described to restore the CR-IR 391CL using the automatically saved setup files and image files backed up by mirroring.
Double-click
on the desktop.
➔ The ”Memeo AutoSync” window opens.
2.
Select Sync Plan (ex. : Image Mirroring) and click [Remove Sync Plan].
CAUTION Before connecting the NAS to CR-IR 391CL, be sure to delete the Sync Plan of AutoSync. With the mirroring function of the SyncPlan, “Image” folders on the NAS side and the PC side are synchronized. Due to this function, proper image files on the NAS side might be overwritten by the collapsed image files on the PC side. Meanwhile, after restoring the “Image” folder on the PC side, be sure to turn on the mirroring function again.
INApp19119.ai
➔ The ”Remove Sync Plan Confirmation” window opens.
INApp19120.ai
3.
Click [Yes]. ➔ The system returns to the ”Memeo AutoSync” window.
4.
Check no Sync Plan is displayed on “Memeo AutoSync” window.
INApp19121.ai
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-31
Appx IN 2-32 NOTE
■ Connecting the NAS
1.
Connect TeraStation to the CR-IR 391CL.
2.
Restore the study files.
3.
(*) Enter the following folder for DB path. \\(NAS Host name)\FujiFilm\Backup\(the latest day folder)\Database The latest day folder can be confirmed in NAS Host name : NAS navigator. Files are backed up on each day in the latest day folder : Backup folder in the NAS.Specify the last backup file that is backed up properly.
I.
Open the Image_Mirror folder in the NAS.
II.
Copy all the files in the Image_Mirror folder.
III.
Paste them in the following image save folder of the CR-IR 391CL Server PC (*).
➔ c:\FujiFilm\Hobbit\Data\Image
Restore the Image DB. I.
Start up the command prompt.
II.
Enter “osql -Usa -Pfcr-dms -Slocalhost”, and press the key.
➔ The osql utilities starts up.
INApp19047.ai
INApp19046.ai
III.
Execute the following command to restore the Image DB.
a) Enter “RESTORE DATABASE Study FROM DISK = ‘DB path(*)\Study.bak’ WITH REPLACE”. b) Press the [Enter] key. c) Enter “go”. d) Press the [Enter] key.
IV.
Execute the following command to restore the Patient DB.
Enter “RESTORE DATABASE Patient FROM DISK = ‘DB path(*)\Patient. bak’ WITH REPLACE”.
The following procedures are same as step III.
V.
Execute the following command to restore the Explanation DB.
Enter “RESTORE DATABASE Explanation FROM DISK = ‘DB path(*)\ Explanation.bak’ WITH REPLACE”.
The following procedures are same as step III.
VI.
Execute the following command to restore the Operation log DB.
Enter “RESTORE DATABASE History FROM DISK = ‘DB path(*)\History. bak’ WITH REPLACE”.
The following procedures are same as step III.
VII. Execute the following command to restore the Study List Config DB.
Enter “RESTORE DATABASE ListConfig FROM DISK = ‘DB path(*)\ ListConfig.bak’ WITH REPLACE”.
The following procedures are same as step III.
VIII. Execute the following command to restore the Preset DB.
020-221-02E 01.08.2010 FM5563
Enter “RESTORE DATABASE Preset FROM DISK = ‘DB path(*)\Preset. bak’ WITH REPLACE”.
The following procedures are same as step III.
CR-IR 391CL Service Manual
Appx IN 2-32
Appx IN 2-33 4.
Restoring System Config. Copy the all the files for Backup folder of System Config(*1) in TeraStation to the folder of System Config(*2) CR-IR 391CL Server PC.
■ Reconfiguration of Synchronization function setting For information, refer to “■ Synchronization function setting” under “6.2 Synchronization Function Setting”
NOTE (*1) Specify the following for Backup folder of System Config. \\(NAS Host name)\FujiFilm\Backup\(the latest day folder)\Config The latest day folder can be confirmed in NAS Host name : NAS navigator. Files are backed up on each day in the latest day folder : Backup folder in the NAS. Specify the last backup file that is backed up properly. (*2) Specify the following depending on the OS. ➔ c:\ProgramData\FujiFilm\Hobbit\Config
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-33
Appx IN 2-34 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-34
Appx IN 2-35 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-35
Appx IN 2-36 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 2-36
Appx IN 3-1
Appendix 3 Setting a DICOM MWM Patient information Procedure to set a MWM device as a search target for patient information is described.
■ Before setup *1
Setting has been made on the DICOM MWM equipment. Make sure the setup of the CR-IR 391CL main unit has been completed. DICOM ID MWM Key Software Option key is required. *1 The SCU AE Title of CR-IR 391CL set on the MWM server is “FCR-SCU”.
■ Overall workflow 1. Hardware Setup
1. Hardware Setup Connect the CR-IR 391CL and the DICOM storage equipment through TCP/IP networking as illustrated below. 100BASE-TX cable TCP/IP
CR-IR 391CL
DICOM MWM equipment INApp21001.ai
NOTES Do not connect a telephone line to the network connector on the CR-IR 391CL system. Cables used for connection to the CR-IR 391CL system should be of the type compliant with the IEC950/UL1950 standards.
2. Software Setup 2.1 Installing the Option Key 2.2 Reinstalling the AP Key 2.3 Settings in the Service Utility
3. Connection Check
4. Backing Up the Setup File
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 3-1
Appx IN 3-2
2. Software Setup
2.1 Installing the Option Key The “Saving to DICOM storage device” option key is required.
2.1 Installing the Option Key
2.2 Reinstalling the AP Key
NOTE When the option key and/or the application key is to be installed, it is required that the CR-IR 391CL is connected to the network. Make sure that network connection has been established before performing the installation.
2.3 Settings in the Service Utility
1.
Insert an option key CD into the DVD drive.
2.
Double-click DVD drive (D:). ➔ The installation start window opens.
INApp21002.AI
3.
Click [Continue]. ➔ A window opens to indicate the completion of installation
INApp21003.AI
4.
Click [OK]. ➔ The system returns to the desktop screen.
5. 020-221-02E 01.08.2010 FM5563
Remove the CD from the DVD drive.
CR-IR 391CL Service Manual
Appx IN 3-2
Appx IN 3-3 2.2 Reinstalling the AP Key Once you have installed the option key, be sure to reinstall the AP key. Reinstall the AP key using the AP key CD The installation procedure is as follows:
1.
Insert the AP key CD into the DVD drive.
2.
Double-click DVD drive (D:).
2.3 Settings in the Service Utility 1.
Start up the Service Utility. For how to start up the Service Utility, see “2. Starting, Logging-in to, and Exiting the Service Utility” under “MU: Maintenance Utility.”
➔ The “Service Utility top” window opens.
2.
Click [Linkage function]. ➔ The “Setting the linkage function” window opens.
➔ The installation start window opens.
3.
Click [Linkage of MWM Patient information]. ➔ The “Linkage of MWM Patient information” window opens.
INAppE0004.ai
3.
Click [Continue]. ➔ A window opens to indicate the completion of installation.
INAppE0005.ai
4.
Click [OK]. ➔ The system returns to the desktop screen.
5.
Remove the CD from the DVD drive.
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 3-3
Appx IN 3-4 4.
5.
Specify the following settings.
Click [OK]. ➔ The system returns to the “Setting the linkage function” window.
I. II.
6.
Click [Back]. ➔ The system returns to the “Service Utility top” window.
7.
Click [EXIT].
III. IV. V. VI. VII.
INApp21004.AI
No.
Item
I.
Support the linkage of MWM Patient information
Place a checkmark to Support
II.
Patient information to be searched first.
Select MWM
III.
Device name
Set the name of the equipment to be connected
IV.
Host name
Set the name of the equipment to be connected on the network
V.
DICOM AE name
Set the DICOM AE name
VI.
IP address
Set the IP address of the equipment to be connected
VII.
Port number
Set the port number of the equipment to be connected
020-221-02E 01.08.2010 FM5563
Content
CR-IR 391CL Service Manual
Appx IN 3-4
Appx IN 3-5
3. Connection Check 1.
Enter ID in the “Input ID” window of the patient-originated window, and press the key.
➥ REFERENCE If you cannot connect to the MWM equipment, check that the following log file is created. Folder: C:\Users\ProgramData\FujiFilm\Hobbit\Log File name: DICOMMWMPI.log This file is always created at the time of establishing the session.
INApp21007.AI
INApp21005.AI
➔ Patient information with the entered ID is retrieved from the DICOM MWM equipment and displayed.
To display the “ProgramData” folder, put a checkmark to “Show hidden files and folders” under the “View” tab in the “Folder Options” window.
INApp21006.AI
INApp21008.AI
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 3-5
Appx IN 3-6
4. Backing up the Setup File Back up the CR-IR 391CL setup file. For details of the backup procedure, see “6.1 Backing Up the CR-IR 391CL Setup File” under “IN: Installation.”
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 3-6
Appx IN 3-7 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 3-7
Appx IN 3-8 BLANK PAGE
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
Appx IN 3-8
PC-I
CR-IR 391CL Service Manual
PC: Performance Check
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
PC-I
PC-II
PC: Performance Check
Control Sheet Issue date
Revision number
04/28/2009 01/08/2010
01 02
020-221-02E 01.08.2010 FM5563
Reason New release (FM5535) Revision for software V1.1(B) (FM5563)
Pages affected All pages 1 to 7
CR-IR 391CL Service Manual
PC-II
PC-1
CR-IR 391CL Performance Checklist The purpose of this checklist is to document the steps performed and settings determined during installation of the CR-IR 391CL system in accordance with the instructions of the CR-IR 391CL Service Manual. This checklist is not intended to replace the installation workflow described in the service manual but to be followed concurrently. Check system connections and output images not only during installation but also after servicing to ensure correct operation of the system prior to its delivery to the customer.
Installation information Equipment S/N : Site Name : Site Number : Room Name :
Software Ver. : Installed by : Signature : Date of Installation/Servicing :
Checklist 1. Hardware Setup
Pass Fail
Checking the component items Accessories
Installing accessories/optional items
020-221-02E 01.08.2010 FM5563
“4. Software Setup” under “IN: Installation” Setting/checking the system date and time
CR-IR 391CL setup for connection with other equipment
Pass Fail
IP address
Default Change
(172.16.1.20)
Subnet mask
Default Change
(255.255.0.0)
Host name
(
)
Gateway address
(
)
Registered AE title
“3. CR-IR 391CL Hardware Setup” under “IN: Installation”
Equipment main unit
2. Software Setup
Monitor
Pass Fail
Media Storage
(
)
Print SCU
(
)
Storage SCU
(
)
Pass Fail
CR-IR 391CL Service Manual
PC-1
PC-2 3. Checkout Procedures
Checking required when the optional function is provided
“5. Checkup Work” under “IN: Installation” Checking the connection between the CR-IR 391CL and the RU
Pass Fail
Checking the connection with another device (Manufacture :
Device name :
)
IP address:
NAS
RAID setting in the NAS Image folder synchronization function Past images transfer function
Checking the system settings
Pass Fail NA
Importing and displaying the general-purpose image data
Pass Fail NA
Generating output of image data transferred from the Image Reader to a Pass Fail storage device NA Receiving Patient information via DICOM MWM ID
Pass Fail N.A.
Connection to the NAS
Pass Fail N.A.
N.A. (Not Applicable): Shows that the relevant item is not targeted for this checkup.
Automatic output setting DVD
Generates automatic output. (after verification of a study) Does not generate automatic output.
Printer
Generates automatic output. (after verification of a study) enerates automatic output. (after completion of an exposure) G Does not generate automatic output.
General-purpose file
Generates automatic output. (after verification of a study) enerates automatic output. (after completion of an exposure) G Does not generate automatic output.
Storage
Generates automatic output. (after verification of a study) Does not generate automatic output.
Automatic verification settings After confirmation of a study (after completion of an exposure) After passing (
Registering a study from a client PC and performing such study
) minutes of specified time upon completion of confirmation
4. Setup File Backup and RU Error Log Verification and Deletion “6. Setup File Backup and RU Error Log Verification/Deletion” under “IN: Installation”
Setup file backup 5. Overall Test
Pass Fail Pass Fail
6. Storing Processed Films or Image Data at Institutions as the Records of the Performance Check Pass Fail
No value is to be set up. Operation check Displaying image data transferred from the Image Reader on the monitor Pass Fail Automatically recording image data transferred from the Image Reader onto a DVD
Pass Fail
Reading image data from a DVD onto the hard disk to display it on the monitor
Pass Fail
Create a PDI from the study data
Pass Fail
Generating film output of an image displayed on the monitor
Pass Fail NA
020-221-02E 01.08.2010 FM5563
CR-IR 391CL Service Manual
PC-2
PC-3
CR-IR 391CL Config List
4.
Check
“6. Service Settings” under “MU: Maintenance Utility”
1.
Localize Setting Check
2.
Setting is Also Possible with the User Utility
No.
Name
1-1
Date display format
1-2
Time display format
1-3
Enable images stored in HDD
Setup Value
5.
Setting for Institution Check
No.
Name
Check Setup Value
4-1
Whether to use guidance function on the exposure screen.
4-2
Whether to perform automatic output of the studies re-verified (previously-verified studies which were verified once again after necessary modifications have been applied).
4-3
Display unit of size measurement
4-4
Display unit of weight measurement
No.
Name
5-1
IP size selection (inch/metric)
5-2
System ID (A-Z)
2-1
Institution name em-size
5-3
Set number: Minimum value
2-2
Institution name en-size
5-4
Set number: Maximum value
2-3
Institution information 1 (Use paper print.)
5-5
Whether Pantomography processing is executed or not.
2-4
Institution information 2 (Use paper print.)
2-5
Institution information 3 (Use paper print.)
5-6
Whether GS conversion for six Ts/1824 images is performed or not.
2-6
Institution information 4 (Use paper print.)
2-7
Institution logo mark (Use paper print.)
2-8
System name for which search conditions are displayed on the study list
6.
Setting for Entering Patient Name Check
Name
No.
Name
3-1
Whether an input column for kanji patient name is displayed or not.
3-2
Character string length of patient ID (up to 64 characters)
3-3
Padding method of patient ID
3-4
Default patient ID value to be given when the actual patient ID is unavailable in the data received via DICOM communication from the ultrasound device.
020-221-02E 01.08.2010 FM5563
Setup Value
Setting for Image Collection Setup Value
Setting for Image Browsing Check
3.
No.
No.
Name
6-1
Display unit of measurement result
6-2
Number of rows displaying additional image information
6-3
Number of lines displaying additional image information
Setup Value
Setup Value
CR-IR 391CL Service Manual
PC-3
PC-4 7.
Setting for General-purpose File Output Check
8.
No.
Name
7-1
Path name at general-purpose file output destination at the time of automatic output.
7-2
General-purpose file format at the time of automatic output.
7-3
General-purpose file reduction rate % at the time of automatic output.
7-4
General-purpose file image quality at the time of automatic output (compressibility)
7-5
Name generation rule for general-purpose file at the time of output.
7-6
Name generation rule for general-purpose file at the time of output (For studies other than CR).
7-7
Default character strings to be output to patient information text file.
Check
Setup Value
9.
No.
Name
8-1
Whether support is provided or not to linkage with the receipt computer.
8-2
Device model linked to the receipt computer.
8-3
Host name of receipt computer
8-4
Internet Protocol address of receipt computer
8-5
Port number for connecting to receipt computer
8-6
Cable format requesting patient information to receipt computer
8-7
Inquiry time-out value second
8-8
Preferential destination for patient information search
8-9
Shared folder for linkage with the receipt computer
020-221-02E 01.08.2010 FM5563
Name
8-10
Shared folder monitoring interval [sec] on linkage with the receipt computer
8-11
Port number for receiving cable messages from the receipt computer
8-12
Receipt time-out value [msec] of continuous cable messages from the receipt computer
Setup Value
Setting for Image Link Check
Linkage with the Receipt Computer Check
No.
No.
Name
9-1
Whether support is provided or not to Image Link as well as its linkage device model.
9-2
Pipe name when named pipe is communicated
9-3
Whether or not an automatic acquisition of a patient ID is made from the electronic medical chart at the time of starting a new study
9-4
Required cable response time-out value second when the pipe is connected
9-5
User name when the pipe is connected
9-6
Password when the pipe is connected
9-7
Interval [msec] for monitoring the common folder that checks requests for image display and study reservation/start, using the networking function. *Networking system = STANDARD
Setup Value
Setup Value
10. Image Incidental Information Check
No. 11-1
Name
Setup Value
Activation of the image processing modification flag
CR-IR 391CL Service Manual
PC-4
PC-5 11. Print Format Check
No.
Check Name
Setup Value
No.
Name
12-19
Film character area position and rotation when Osumi Film 14×14-Single is formatted (default rule)
12-20
Film character area position and rotation when Single is formatted onto B4 film (equal to 10×14)
12-1
Type specification of film margin (blank part)
12-2
Trimming volume [mm] (excluding Mammo)
12-3
Whether or not there is a frame on the image when 18x24 Single is formatted 14×17, 14×14, 18×43 / 8×10.
12-4
Whether or not there is a frame on the image when 14×17, 18×43LR, 2on1 are formatted.
12-22
Film character area position and rotation when LR on B4 film (equal to 18×24) is formatted (default rule)
12-5
Whether or not there is a frame on the image when 14×17, 18×43, 8×10, 4on1 are formatted.
12-23
Film character area position and rotation when 2 on 1 display on B4 film (equal to 18×24) is formatted (default rule)
12-6
Whether or not there is a frame on the image when 2on1 display of L&R breast images on B4 film (equal to 18×24) is formatted.
12-24
Film character area position and rotation when 10×12 size film and 2430-Single are formatted (default rule)
12-7
Whether or not there is a frame in the 8×10 mammo Single image formatted onto B4 film.
12-8
Whether or not there is a frame in the output image equal to 1824.
12-9
Setting of menu code in which scale is not displayed (effective when setting is such that image frame is added).
12-10 Specification of age display form 12-11 Specification of right and left reversing mark display form Whether or not film character area display is available when 12-12 18×24-Single is formatted half-size Film 14×17-Single/4on1, 18×43-LR/2on1/4on1, 8×10-4on1 format, and 8×10 film size. 12-13
Film character area size when a film equal to 14×17 size is output.
12-14
Film character area position and rotation setting when halfsize Film 14×17-Single/4on1 is formatted (default rule)
Film character area position and rotation setting when 12-15 Single/4on1 half-size Film 17×14 (horizontal half-size)-is formatted (default rule) 12-16
Film character area position and rotation setting when halfsize Film 18×43-LR/2on1/4on1 is formatted (default rule)
Film character area position and rotation setting when 12-17 18×24-Single is formatted half-size Film 8×10-4on1 format and 8×10 size film (default rule) Film character area position and rotation setting when 8×10 12-18 and 18×24-Single (90 degree-rotation available) are formatted. (default rule)
020-221-02E 01.08.2010 FM5563
Setup Value
Film character area position and rotation when Single is 12-21 formatted onto B4 film (equal to 14×10 horizontal B4) (default rule)
Film character area position and rotation when 10x12 size 12-25 film, 2430-Single (90 degree-rotation available) are formatted. (default rule) 12-26
Film character area position and rotation setting when halfsize Film 14×17-Single/4on1 is formatted (user definition 1)
Film character area position and rotation setting when 12-27 Single/4on1 half-size Film 17×14 (horizontal half-size)-is formatted (user definition 2) 12-28
Film character area position and rotation setting when halfsize Film 18×43-LR/2on1/4on1 is formatted (user definition 3)
Film character area position and rotation setting when 12-29 18×24-Single is formatted half-size Film 8×10-4on1 format and 8×10 film size format (user definition 4) 12-30
Position and rotation setting in film character area when image and film character area come in succession (user definition 5)
12-31
Position and rotation setting in film character area when image and film character area come in succession (user definition 6)
12-32
Image display position specification when 43×43 Single is formatted half-size Film 15×30 and 35×35 (part display)
12-33 Setting for validity/invalidity of reduced output onto a 8×10 film 12-34
Reduction ratio when 2 on 1 display of L&R breast images on B4 film (equal to 18×24) is printed out.
Setting for Whether or not an expansion print is executed 12-35 when an image with the standard density format print is output.
CR-IR 391CL Service Manual
PC-5
PC-6 12. Film Character Setting Check
No.
Name
14. Operation (Low Frequency) Setting Setup Value
Check
No.
Name
13-1
Whether or not EDR mode is displayed.
15-1
The maximum registration number of patient information
13-2
Whether or not image processing conditions are displayed.
15-2
The maximum registration number of study information
13-3
Whether or not L value, S value, CS, and SS information are displayed.
15-3
Status acquisition timing of DICOM printer
13-4
Whether or not exposure time is displayed.
15-4
Timeout occurring prior to study termination Maximum number of markers
13-5
Whether or not routine and class processing information are displayed.
15-5 15-6
Primary threshold warning system capacity
13-6
Whether or not menu names are displayed.
15-7
Secondary threshold warning system capacity
13-7
Whether or not compression code is displayed.
15-8
Warning threshold on system capacity
13-8
Whether or not barcode is displayed.
15-9
Primary threshold warning database capacity
13-9
Setting for the maximum value of en-size character numbers for the patient names to be film-output.
13-10
Setting for the maximum value of em-size character numbers for the patient names to be film-output.
15-10 Secondary threshold warning database capacity 15-11 Warning threshold on database capacity 15-12 Minimum remaining capacity of local HDD
13-11 Setting for right/left justification of patient names. 13-12
Setting for the maximum value of en-size character numbers for the exposure menu names to be filmoutput.
13-13
Setting for the maximum value of em-size character numbers for the exposure menu names to be filmoutput.
15. Setting for Analysis Check
No.
Name
13-14 Setting for right/left justification of the exposure menu names.
19-1
Log acquisition of DICOMPrintSCU communication
Activation of automatic generation function for film annotation character format.
19-2
Log acquisition of FRUPMain control communication
19-3
Log acquisition of FRUP connection watch
19-4
Log acquisition of FRUP image connection
19-5
Trace log acquisition when image is output
19-6
Log acquisition of DICOM verification SCU
19-7
Log acquisition of DICOM storage SCU
19-8
Collect image data for maintenance logs (For the number of studies)
19-9
Arbitrary settings for acquisition of DICOM storage SCP log
13-15
13. Setting for Output Function Check No. 14-1
Name Whether or not re-try has been executed after an abnormal output was made.
14-2 Status acquisition timing of DICOM printer 14-3 Arbitrary setting of DVD burning for storage 14-5
Whether annotation information will be embedded in the images for film output.
14-6
Whether annotation information will be embedded in the images for general-purpose file output.
020-221-02E 01.08.2010 FM5563
Setup Value
Setup Value
Setup Value
19-10 Retrieve the log in MWM function
CR-IR 391CL Service Manual
PC-6
PC-7 16. Settings for Endoscopic Image Import Check
No.
Name
20-1
Support availability on endoscopic image import and the receiving system
20-2
Receiving folder for endoscopic image import
Setup Value
20. Setting for DICOM-MWM Check
No.
Name
25-1
Whether support is provided or not to linkage with the MWM Server
25-2
Preferential destination for patient information search, in the linkage with MWM Server
Setup Value
17. Electrocardiographic Data Import Settings Check
No.
Name
21-1
Data structure linked with the electrocardiograph (The data varies from maker to maker.)
21-2
Folder in which on-line electrocardiographic data obtained from Fukuda Denshi electrocardiograph is stored in the form of folder path
21-3
Folder dedicated for registration/management in which electrocardiographic data for display obtained from Fukuda Denshi electrocardiograph is stored
21-4
Folder in which Fukuda Denshi electrocardiograph data that has been modified is temporarily stored for update at a later time
