Vi sua su al -Envi nv i ronm ro nme ent 9.0 Visual-Assembly (Beta)
Visual-Mesh (Cast)
Visual-Cast
Visual-NVH & Interior Acoustics
Visual-CEM
Visual-OPT (Beta)
Visual-CFD
Visual-Process Executive
Visual-Crash DYNA
Visual-Safe
Visual-Crash PAM
Visu al-Safe al-Safe MAD
Visual-Crash Visual-Crash RAD
Visual-SDK
Visual-DIEMAKER
Visual-Seal
Visual-Distortion
Visual-Shock
VisualDSS Visual DSS
Visual-SYSTUS
Visual-FORM
Visual-Viewer
Visual-Heat Treatment
Visual-Viewer (Cast)
Visual-Life NASTRAN
Visual-Viewer Visual-Viewer (Compos ites)
Visual-Local Visual-Local Model Advisor
Visu al-Viewer (Seal) (Seal)
Visual-Materials Visual-Materials (Compo (Compo sit es)
Visual-Viewer (Weld)
Visual-MEDYSA
Visual-VTM
Visual-Mesh
Visual-Weld
INST INSTA A L L A TION TION GUI GUIDE DE
The documents and related know-how herein provided by ESI Group subject to contractual conditions are to remain confidential. The CLIENT shall not disclose the documentation and/or related know-how in whole or in part to any third party without the prior written permission of ESI Group.
© ESI Group, 2013. All rights reserved.
August 2013
Vi sua su al -Envi nv i ronm ro nme ent 9.0 Visual-Assembly (Beta)
Visual-Mesh (Cast)
Visual-Cast
Visual-NVH & Interior Acoustics
Visual-CEM
Visual-OPT (Beta)
Visual-CFD
Visual-Process Executive
Visual-Crash DYNA
Visual-Safe
Visual-Crash PAM
Visu al-Safe al-Safe MAD
Visual-Crash Visual-Crash RAD
Visual-SDK
Visual-DIEMAKER
Visual-Seal
Visual-Distortion
Visual-Shock
VisualDSS Visual DSS
Visual-SYSTUS
Visual-FORM
Visual-Viewer
Visual-Heat Treatment
Visual-Viewer (Cast)
Visual-Life NASTRAN
Visual-Viewer Visual-Viewer (Compos ites)
Visual-Local Visual-Local Model Advisor
Visu al-Viewer (Seal) (Seal)
Visual-Materials Visual-Materials (Compo (Compo sit es)
Visual-Viewer (Weld)
Visual-MEDYSA
Visual-VTM
Visual-Mesh
Visual-Weld
INST INSTA A L L A TION TION GUI GUIDE DE
The documents and related know-how herein provided by ESI Group subject to contractual conditions are to remain confidential. The CLIENT shall not disclose the documentation and/or related know-how in whole or in part to any third party without the prior written permission of ESI Group.
© ESI Group, 2013. All rights reserved.
August 2013
VISUAL-ENVIRONMENT © 2013 ESI Group
i
INSTALLATION GUIDE (released: Aug-13)
CONTENTS Introduction
1
Media Media Contents Content s
1
Installati on on UNIX UNIX/Linu /Linu x
2
Overview ------------------------------------------------------------------------------------- 2 Minimum Requirements ------------------------------------------------------------------ 3 Hardware -------------------------------------------------------- ---------------------------- 3 Software ----------------------------------------- -------------------------------- ------------ 4 Shell Compliance Compliance ------------------------------ -------------------------------- ------------ 4
Installation of the Software -------------------------------------------------------------- 5 DVD-R Instructions ------------------------------------------ --------------------------------- -------------------------------- -5 Graphical Installation -------------------- -------------------------------- ----------------- 5
Installation of the License ------------------------------------------------------------- 13 Graphical Installation ---------------------------------------------------- --------------- 14 Customization ----------------------------- -------------------------------- --------------- 21
X Server Server Setti Setti ngs ng s
23
For UNIX ----------------------------------------------------------------------------------- 23
Installation Installation on Windo ws
24
Minimum Requirements ---------------------------------------------------------------- 24 Installation of Software ----------------------------------------------------------------- 25 DVD Instructions------------------------------- -------------------------------- ---------- 25
Installation Installation for Visual-Local Visual-Local Model Model Advis or (VLMA) (VLMA)
27
Sysweld Resource File Updation ------------------------------------------------------------------------------------------------------- 27
Installation Installation of the License
29
How To Get Your FLEXnet License File? -------------------------------------- 29 Starting the FLEXnet License Server -------------------------------------------- 31
Invoking the Application
33
Windows ----------------------------------------------------------------------------------- 33 UNIX / Linux ------------------------------------------------------------------------------- 33
Troubleshooting
34
Contents
INSTALLATION GUIDE (released: Aug-13)
Contents
ii
VISUAL-ENVIRONMENT © 2013 ESI Group
Software Autho rization rization
38
License Li cense Requ Request est
39
VISUAL-ENVIRONMENT © 2013 ESI Group
1
INSTALLATION GUIDE (released: Aug-13)
INTRODUCTION This Installation Guide, provided by ESI Group, describes the installation procedure for all ESI Group products package on supported Windows and UNIX/Linux platforms. You should not attempt to install ESI Group products until you have become familiar with this installation guide. The Installation on Unix/Linux chapter discusses the overview, system requirements, installation, uninstallation, and troubleshooting on a Unix/Linux-based platform.
MEDIA CONTENTS The ESI Group software packages for Windows and Unix-based workstations shipped by ESI Group contain the following items:
Introduction
•
DVD-R containing the Visual-Environment software.
•
Visual-Environment Installation Guide (this manual in .pdf)
•
Visual-Environment Release Notes (.pdf)
INSTALLATION GUIDE (released: Aug-13)
2
VISUAL-ENVIRONMENT © 2013 ESI Group
INSTALLATION ON UNIX/LINUX OVERVIEW To install the ESI Group products on UNIX & Linux platform, two installation procedures are available: •
paminst-gui.sh
It is a Graphical User Interface script.
•
paminst.sh
It is an old-fashioned line-oriented line script.
Both procedures perform the following tasks: Install the software (described in Installation of Software chapter). •
Copy from the DVD-R all the files of software to the location chosen by the user.
License management (described in Installation of License chapter). •
Install the license file.
•
Start the license daemons lmgrd and pam_lmd if needed.
•
Install the license daemon startup scripts 1
Customization (described in Customization of Software Environment chapter). •
Set up the ESI Group software environment for each current user.
Tasks 2 and 3 can be performed later if the user does not want to do them immediately. After the installation, files installed on the hard disk are organized in a directory tree as indicated below: Head Directory this is refer enced as PAMHOME Installation Scripts...
Version1_COMMON Ressource files
MODULE 1
MODULE 2
Examples
LICENSES
DOC
Executables, other files...
Executables, other files...
Examples files, test cases...
License file
Electronic documentation
Version1_platformOS1 Version1_platformOS2 Version2_platformOS1 Executables
Executables
Executables
platformOS1
platformOS2
Daemon and tool files
Daemon and tool files
1
Sufficient privileges may be required by the system during the installation of ESI Group products. Although no system library is updated in the process, the sufficient privileges will be needed to mount the DVD-R and to install the boot files to start the license server.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
3
INSTALLATION GUIDE (released: Aug-13)
MINIMUM REQUIREMENTS Hardware •
1 gigabyte of RAM recommended.
•
2 GB main memory and fastest CPU is recommended for large CAD/FE model operations.
•
OpenGL hardware graphic accelerator (highly recommended). Systems without an OpenGL graphic board will perform significantly slower.
•
4.2 GB disk (free) space for complete installation or 2.5 GB by platform.
•
Super VGA monitor with the following settings:
o Screen resolution set to at least 1280 x 1024. o Small fonts selected. •
3 button mouse (middle button required for dynamic rotations in graphic window).
Linux: •
Visual 32-Bit version: GlibC
≥
2.5 (RedHat EL 5/6, SUSE 10/11).
•
Visual 64-Bit version: GlibC
≥
2.5 (RedHat EL 5/6, SUSE 10/11).
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
4
VISUAL-ENVIRONMENT © 2013 ESI Group
Software •
Unix/Linux OS (Refer to the file README_Visual-Environment_9.0 under info directory for system requirement details).
•
You need to have any product able to display pdf files (like Adobe Reader – see www.adobe.com ).
•
You need to have any product able to display Html files (like Netscape – see www.netscape.com ).
Shell Compliance •
csh and its variant tcsh are supported on all systems provided on the DVD.
•
ksh is supported on all systems provided on the DVD.
•
bash is supported on all systems provided on the DVD.
•
sh is supported in the following cases:
o HP HP-UX: /usr/bin/sh (Posix compliant). o SUN SOLARIS: /usr/xpg4/bin/sh (Xpg4 compliant). Old sh implementations are not supported. Future Posix sh implementations will be supported.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
5
INSTALLATION GUIDE (released: Aug-13)
INSTALLATION OF THE SOFTWARE DVD-R Instructions Insert the DVD into the drive. Follow the DVD mount and dismount instructions in the table below. PLATFORM IBM AIX
MOUNTING Under ROOT
SPECIFIC INSTRUCTIONS mount / usr / cdr om/ sws mount –v cdr f s –r / cdr om or
DISMOUNTING umount / cdr om
/dev/cd0
HP HP-UX
Under ROOT
mount
–r
–F /dev/dsk/c1t#d0 / cdr om
cdf s umount / cdr om
Oracle SOLARIS
Automatic
-
PC Windows
Automatic
-
PC Linux
Automatic
Requi r es mount opt i on “exec”
ej ect ej ect
# symbol is the SCSI Id number of the DVD-R drive Device names in italics are site dependent
Graphical Installation System Requirements: The installation through graphical user interface is available on the following systems: •
HP HP-UX PA-Risc 11.11 and above;
•
HP HP-UX Itanium2 11.23 and above;
•
IBM AIX 5.1 and above;
•
SGI IRIX 6.5 and above;
•
Oracle Solaris SPARC 5.8 and above;
•
Oracle Solaris x64 5.10 and above
•
PC Linux i686 distributions with GlibC 2.3 and above;
•
PC Linux x86_64 distributions with GlibC 2.3 and above;
•
PC Linux ia64 (Itanium2) distributions with GlibC 2.3 and above.
In order to use the graphical installation, you need:
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
•
6
VISUAL-ENVIRONMENT © 2013 ESI Group
An X-compliant window system available on your display.
o Position the DISPLAY environment variable for display on the current screen and, if necessary, allow this display using an appropriate xhost command on the display host. •
About 15 Mb of free space in the / t mp directory to store graphical tools temporarily.
Launching Installation: To start the graphical software installation script, type the following command: ./INSTALL.SH or /
/INSTALL.SH
If this error message is obtained: I NSTALL. SH: / bi n/ sh: bad i nt er pr et er : Per mi ssi on deni ed
See section “How to override CD drive protection” Follow the instructions displayed in blue color in the dialog boxes presented by the installation tool.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
7
INSTALLATION GUIDE (released: Aug-13)
After the graphical tools are loaded in /tmp, the main dialog box window appears:
Fig 1: Main dialog box window
Click on Install
software button.
It will highlight the
Next button to continue.
Click the Next button to continue the software installation. Click on Cancel button to abort/exit the software installation. Prerequisites of Visual-Environment 9.0 can be obtained in “info” directory present on the DVD media or in $PAMHOME/info after installation.
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
8
VISUAL-ENVIRONMENT © 2013 ESI Group
Fig 2: Installation directory dialog box window
This dialog box is used to specify the installation directory. By default, the text field of the installation directory is filled with the previous pathname of ESI Group software installation directory $PAMHOME. Two ways to select a new software installation location on the system: •
Click on and fill the text field with a valid pathname directory (read, write, execute permissions are required)
•
Click on Browse button to select another software installation location (see Directory selector dialog box for using it).
or
Click on Next button when you are satisfied with the software installation directory selected. Go to the Package selector dialog box section to see details. Click on Cancel button to quit the software installation. Click on Previous button to go back to the main dialog box of the software installation.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
9
INSTALLATION GUIDE (released: Aug-13)
Package Selection:
Fig 3: Package selection window
This dialog box is used to select all the software package(s). Select all the platform package(s) you wish to install by clicking on the toggle(s): •
Flexnet_v11.11.1.tar.bz2
package contains the FLEXnet Utilities (lmgrd/lmutil) and ESI Group vendor daemon (pam_lmd) binaries version 11.11.1 for all UNIX or Linux platforms.
•
Linux-64Bit.tar.bz2 contains the 64-bit binaries for Linux x86_64 distributions.
•
Linux-32Bit.tar.bz2 contains the 32-bit binaries for Linux i686 distributions.
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
10
VISUAL-ENVIRONMENT © 2013 ESI Group
Fig 4: Downloading log window
A scrolled window is displayed showing the downloading of files. When downloading is finished, the previously grayed
Close button
will be highlighted.
Click on it to continue.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
11
INSTALLATION GUIDE (released: Aug-13)
The main dialog box window appears again to perform the next steps, the license installation and/or customization of software environment. Click on Exit button if you wish to perform the License installation and software customization later. Click on License management button and see the Installation of the License chapter for details. A license file is needed to perform this task. Click on Define environ ment button and see the Customization chapter for details.
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
12
VISUAL-ENVIRONMENT © 2013 ESI Group
Directory Selector:
To navigate in the directory selector : Click on this button when you want the current selection. Click on this button to create a new directory in the current selection. It will open this small window. Fill the text field with the new directory name to create in the current selection.
Click on this button to go up of the current selection. Click twice on the icon to go down in the selected directory. Click on OK button to find the new license file on the local disk.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
13
INSTALLATION GUIDE (released: Aug-13)
INSTALLATION OF THE LICENSE You must have a valid license file asked and received from your ESI Group representative. Before to start the license installation you should put the new or updated license file provided by ESI Group representative to the following directory PAMHOME/ l i censes with the filename pam_l md. t emp This task should be done on the system where the license server will run. It will install any valid license file. It will install and run the license server(s) for floating license.
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
14
VISUAL-ENVIRONMENT © 2013 ESI Group
Graphical Installation To find the graphical license installation script, go to the software installation directory and start it by typing the following command: ./paminst-gui.sh
lic
or ./paminst-gui.sh
install_lic
After the graphical tools are loaded in / t mp, the following assistant window appears:
Follow the instructions displayed in blue color .
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
15
INSTALLATION GUIDE (released: Aug-13)
Get Host Id. Button Click on Get host id. button to get the information (description, hostname, hostid) of the system needed for license server installation (floating license) or standalone computer (node-locked license). It will display the following window:
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
16
VISUAL-ENVIRONMENT © 2013 ESI Group
Important remark on Linux i686 or x86_64 based distributions: The FLEXnet Toolkit can only run on LSB3 (Linux Standard Base TM) compliant Linux distributions. The “ LSB3 OS Compliant ” detail must display “ Yes” otherwise your Linux distribution cannot run a license server with this latest version of the FLEXnet Toolkit. Check that the following package is installed on the station: •
RedHat Based Operating Systems : For RedHat, CentOS, Oracle Enterprise Server, Fedora …: package redhat-lsb How to check installation: rpm -q redhat-lsb How to install it (as root or with sudo): yum install redhat-lsb
•
SUSE Based Operating Systems : For SUSE Enterprise, openSUSE …: package lsb How to check installation: rpm -q lsb How to install it (as root or with sudo): yast2 -i lsb
•
Debian Based Operating Systems : For Debian, Ubuntu …: package lsb How to check installation: dpkg-query -l lsb How to install it (as root or with sudo): apt-get install lsb
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
17
INSTALLATION GUIDE (released: Aug-13)
License Directory Selection By default, the text field is filled with the pathname of previous software installation directory. Click on and fill the text field with the pathname of the software installation directory or click on Browse button to find it on the system. Caution: •
The specified directory in the text field should contain a licenses subdirectory with write permission to highlight the Next button, else you cannot continue the license installation at this step.
Click on Next button when the installation directory pathname is selected.
This dialog box selects and installs the license file in the right location.
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
18
VISUAL-ENVIRONMENT © 2013 ESI Group
Click on Get another lic ense file button to select a new license file.
Click on OK button to find the new license file on the local disk. A new file browser window appears.
By default, the file filter is set for find PAM license file. Select the new license file then click Open button to valid the selection. A small window displays the checking of the license file selected with the host id of the host.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
19
INSTALLATION GUIDE (released: Aug-13)
The dialog box of license file selection will be displayed again and filled with the lines of selected license file.
Once the file is selected the previously grayed Apply changes to new files button is highlighted. Click then on Save new file as current button. The new license file is installed and the previously grayed Next button is highlighted to continue. Click Next button to perform the starting of the license daemons. This will post another dialog to start daemon now as current user.
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
20
VISUAL-ENVIRONMENT © 2013 ESI Group
Click on Start daemon n ow as current u ser to start the daemon.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
21
INSTALLATION GUIDE (released: Aug-13)
Customization Customization Tasks The ESI Group software installation script, paminst.sh asks for customization.
This customization is done by pamcust.sh which can also be used separately. To perform the customization separately, do the following: •
Log in on the machine on which you want to perform customization.
•
Go to directory where the installation has been done.
•
Type ./pamcust.sh and follow the instructions.
The customization script creates definitions to allow access to the ESI Group executables and configuration files for all users or for selected users, depending on the method chosen by the installer. Most definitions are contained in a file provided by ESI Software. These files are: •
psi.Cenv for csh/tcsh user environment.
•
psi.Kenv for ksh (AT&T ksh or Public Domain ksh) user environment.
•
psi.Baenv for bash user environment.
sh is not supported due to its lack of functionalities required by ESI Group products. We recommend sh users to migrate to ksh, which preserves sh syntax and habits. There
are mainly instructions added to system or site-specific files:
Installation on UNIX/Linux
INSTALLATION GUIDE (released: Aug-13)
C Shell - .cshrc file
Korn Shell - .profile
Bourne Again Shell .bash_profile
22
VISUAL-ENVIRONMENT © 2013 ESI Group
### ESI Gr oup begi n ### # # ESI Gr oup Sof t war e envi r onment # set env PAMHOME / home/ ppg/ ESI Gr oup set env PAMENV $PAMHOME/ env- ` uname` i f ( - r $PAMENV/ psi . Cenv ) t hen sour ce $PAMENV/ psi . Cenv endi f ### ESI Gr oup end ### ### ESI Gr oup begi n ### # # ESI Gr oup Sof t war e envi r onment # PAMHOME=/ home/ ppg/ ESI Gr oup; expor t PAMHOME PAMENV=$PAMHOME/ env- ` uname` ; expor t PAMENV i f [ - r $PAMENV/ psi . Kenv ] ; t hen . $PAMENV/ psi . Kenv fi ENV=${ENV: ””} I f [ - z “$ENV” ] ; t hen ENV=$HOME/ . kshr c; expor t ENV fi ### ESI Gr oup end ### ### ESI Gr oup begi n ### # # ESI Gr oup Sof t war e envi r onment # PAMHOME=/ home/ ppg/ ESI Gr oup; expor t PAMHOME PAMENV=$PAMHOME/ env- ` uname` ; expor t PAMENV i f [ - r $PAMENV/ psi . Baenv ] ; t hen . $PAMENV/ psi . Baenv fi BASH_ENV=${BASH_ ENV: - ””} I f [ - z “$BASH_ENV” ] ; t hen ENV=$HOME/ . bashr c; expor t BASH_ENV fi ### ESI Gr oup end ###
When the installer chooses to customize the process for selected users (using for example .cshrc), he must repeat the customization process for each user repeatedly.
Installation on UNIX/Linux
VISUAL-ENVIRONMENT © 2013 ESI Group
23
INSTALLATION GUIDE (released: Aug-13)
X SERVER SETTINGS FOR UNIX Configure the X server to the following settings: True Color and 24-bit plane default visual.
X Server Settings
INSTALLATION GUIDE (released: Aug-13)
24
VISUAL-ENVIRONMENT © 2013 ESI Group
INSTALLATION ON WINDOWS MINIMUM REQUIREMENTS •
Visual 32-Bit version:
o Windows XP Professional Service Pack 2 o Windows 2003 o Windows Vista o Windows 2008 o Windows 7 •
Visual 64-Bit version:
o Windows XP x64 Edition o Windows 2003 x64 Edition o Windows Vista o Windows 2008 o Windows 7 Note: On Windows Vista, it is recommended to work with “Classic” theme. •
Administrative privileges recommended during installation.
•
x86 or x64 compatible processors (Intel, AMD …).
•
2 gigabytes of RAM recommended.
•
Super VGA monitor with the following settings:
o Screen resolution set to at least 1280 x 1024. o Small fonts selected. •
OpenGL hardware graphic accelerator (highly recommended). Systems without an OpenGL graphic board will perform significantly slower.
•
2.5 GB disk (free) space required in the Pr ogr am Fi l es folder for each version (3.8 GB for complete installation).
•
3 button mouse (middle button required for dynamic rotations in graphic window).
Installation on Windows
VISUAL-ENVIRONMENT © 2013 ESI Group
25
INSTALLATION GUIDE (released: Aug-13)
INSTALLATION OF SOFTWARE DVD Instructions Insert the DVD into the disc drive. Au to ru n i s en abled o n you r c om puter .
The ESI Group software installation should start automatically. When the InstallShield Wizard dialog box is displayed, follow the instructions. Au to ru n i s d is abl ed on y ou r co mp ut er.
Open a Windows Explorer window, click on your DVD drive icon. You should find directory named Vi sual Env90_Wi ndows, whi ch contains both 32Bit and 64-Bit versions of Visual-Environment 9.0 Double click on Set up. exe file found to start the software installation. When the InstallShield Wizard dialog box is displayed, follow the instructions. When the software installation is completed, the ESI group applications will be available in the Start/Programs/ESI Group menu or in the ESI Group folder icon on desktop. Installing Visual-Environment 9.0 on command lin e
Visual-Environment 9.0 installation is powered by Microsoft ® Windows ® Installer. This means that installation can be done graphically or silently using command line. Open a command prompt (cmd.exe or command.com). Syntax is: msiexec / "" =
Installation on Windows
INSTALLATION GUIDE (released: Aug-13)
26
VISUAL-ENVIRONMENT © 2013 ESI Group
The parameters options available with Visual-Environment 9.0 are: /I
Installs or configures a product.
/q[n|b|r|f]
Sets user interface level: /q , /qn : No UI /qb : Basic UI. Use "qb!" to hide the Cancel button. /qr : Reduced UI with no modal dialog box displayed at the end of the installation. /qf : Full UI and any authored FatalError, UserExit, or Exit modal dialog boxes at the
end. /qn+ : No UI except for a modal dialog box displayed at the end. /qb+ : Basic UI with a modal dialog box displayed at the end. The modal box is not
displayed if the user cancels the installation. Use "/qb+!" or "/qb!+" to hide the Cancel button. /qb- : Basic UI with no modal dialog boxes. Please note that "/qb+-" is not a supported
UI level. Use "/qb-!" or "/qb!-" to hide the Cancel button. Note that the "!" option is available with Windows Installer 2.0 and works only with basic UI. It is not valid with full UI. The available PROPERTY options with Visual-Environment 9.0 are (case sensitive): INSTALLDIR=""
Specify an installation directory, otherwise default "%ProgramFiles%\ESI Group\Visual-Environment\9.0"
value
FLEX=FALSE
If you do not want to install the FLEXnet licensing toolkit. Default value is TRUE in MSI table.
VE=32
Force installation of Visual-Environment 32-bit only, 64-bit version will not be installed. Default is TRUE in MSI table (32b+64b versions)
VE=64
Force installation of Visual-Environment 64-bit only, 32-bit version will not be installed. Default is TRUE in MSI table (32b+64b versions) Example: msiexec /i ":\VisualEnv90_Windows\ESI Group Visual-Environment 9.0.msi" msiexec /i ":\VisualEnv90_Windows\ESI Group Visual-Environment 9.0.msi " /qb INSTALLDIR="D:\Program Files\ESI Group\Visual-Environment\9.0" VE=64 where corresponds to your CD/DVD drive.
When the software installation is completed, the product will be available in the St ar t / Pr ogr ams/ ESI Gr oup menu or in the ESI Gr oup icon folder on the desktop.
Installation on Windows
is
VISUAL-ENVIRONMENT © 2013 ESI Group
27
INSTALLATION GUIDE (released: Aug-13)
INSTALLATION FOR VISUALLOCAL MODEL ADVISOR (VLMA) SYSWELD RESOURCE FILE UPDATION •
VLMA 9.0 requires SYSWELD 2011.0 solver (preferably installed on the same Windows system) with additional license key (welding) and some specific resource directories for execution.
•
After Visual-Environment installation, please execute as administrator a script for VLMA 9.0 resource installation. This script file (install_vlma.bat) is available under “VE Installation Directory”/Windows-x86/Tools/VLMA path for Windows x86 32-bit platform or “VE Installation Directory”/Windowsx64/Tools/VLMA path for Windows x86 64-bit platform.
Installation for Visual-Local Model Advisor (VLMA)
INSTALLATION GUIDE (released: Aug-13)
28
VISUAL-ENVIRONMENT © 2013 ESI Group
•
The install_vlma.bat script will prompt for the SYSWELD 2011.0 solver installation path and accordingly create the resources required for VLMA 9.0.
•
This completes the installation for VLMA 9.0.
Installation for Visual-Local Model Advisor (VLMA)
VISUAL-ENVIRONMENT © 2013 ESI Group
29
INSTALLATION GUIDE (released: Aug-13)
INSTALLATION OF THE LICENSE Before all, you must have a valid license file. The license file is sent separately from the software installation. See below How to get your FLEXnet License File.
HOW TO GET YOUR FLEXNET
LICENSE FILE?
System information must be retrieved before you can request your FLEXnet license files. •
If request is a node-locked based license file, execute c : \ f l exl m\ l mt ool s . exe on each PC that will be running ESI Group software.
•
If request is a floating license file running on Windows, execute c: \ f l exl m\ l mt ool s . exe on the station that will be the license server.
•
Select System Setting s.
•
Send all the information in the left part ( Hostid Settings ) to your local ESI support representative. They will send the license file to you.
Once you have received your license file(s), it/they must be moved to the appropriate directory c: \ f l exl mon each machine with the file name pam_l md. l i c
Installation of the License
INSTALLATION GUIDE (released: Aug-13)
30
VISUAL-ENVIRONMENT © 2013 ESI Group
What to do if MAC address is "FFFFFFFF"?
The licensing tools see my hostid as "FFFFFFFF" when using a Virtual NIC even though the ipconfig command will show a different hostid for the Virtual NIC. Virtual NICs are no longer supported in FLEXnet 11.6 and newer versions of the FLEXnet licensing software.
This is not a bug, but a deliberate change in FLEXnet software behaviour. Workaround is to un-team these Ethernet adapters or enable a disabled adapter or install a new Ethernet adapter. If really not possible, "Disk Volume Serial Number" can eventually be used as server hostid.
Installation of the License
VISUAL-ENVIRONMENT © 2013 ESI Group
31
INSTALLATION GUIDE (released: Aug-13)
STARTING THE FLEXNET
LICENSE SERVER
Preliminary remark: •
The FLEXnet license server installation must be done with administrator rights.
•
This section describes the initialization of a license server based on floating license files. Node-locked license files do not require to start a server.
After ESI Group software has been installed, your pam_l md. l i c file must be moved to the appropriate directory, updated and the FLEXnet license server started. To move and update the license file: •
Move your license file to the directory c: \ f l exl mand name it “pam_lmd.lic”
•
Using any usual text editor edit pam_l md. l i c and change $PAMHOME to c: \ f l exl m\ pam_l md. exe on the line beginning with the DAEMON or VENDOR keyword.
To start the license server: •
Execute c : \ f l exl m\ l mt ool s . exe
•
Select Service/License figure below).
Installation of the License
file and
select
Configuration using Services option
(see
INSTALLATION GUIDE (released: Aug-13)
32
VISUAL-ENVIRONMENT © 2013 ESI Group
•
Select Configure Services , adjust parameters as below and click on
•
Select Start/Stop/Reread and click on Start Server (see below).
Save Service.
After completing these installation steps, you may run the ESI Group software.
Installation of the License
VISUAL-ENVIRONMENT © 2013 ESI Group
33
INSTALLATION GUIDE (released: Aug-13)
INVOKING THE APPLICATION WINDOWS On installation of Visual-Environment, appropriate shortcuts are created on the desktop under the folder ‘ESI Group’, as well as in the Startup menu. Execution of the required shortcuts will invoke the appropriate application.
UNIX / LINUX On installation, following alias shortcuts will be created in the user account. •
visualenv – Visual-Environment
•
vcast – Visual-Cast
•
vcem – Visual-CEM
•
vcd – Visual-Crash DYNA
•
vcfd – Visual-CFD
•
vcp – Visual-Crash PAM
•
vcr – Visual-Crash RAD
•
vform – Visual-FORM
•
viewer – Visual-Viewer
•
vlnas – Visual-Life NASTRAN
•
vmedysa – Visual-MEDYSA
•
vnvhia – Visual-NVH & Interior Acoustics
•
vps – Visual-VPS
•
vsafe – Visual-Safe
•
vseal – Visual-Seal
•
vshock – Visual-Shock
•
vsm – Visual-Safe MAD
•
vsystus – Visual-SYSTUS
•
vvtm – Visual-VTM
•
vweld – Visual-Weld
•
vdbtools – VDBTools for PAM
Execution of required alias shortcuts will invoke appropriate application.
Invoking the Application
INSTALLATION GUIDE (released: Aug-13)
34
VISUAL-ENVIRONMENT © 2013 ESI Group
TROUBLESHOOTING The Windows Installation does not st art automatically.
Check with regedit tool the registry key HKLM\ SYSTEM\ Cur r ent Cont r ol Set \ Ser vi ces\ Cdr omis set to 1 (i.e. autorun enabled)) How to override CD drive protecti on on Linu x:
In newer Linux distributions, DVD/CD-ROM drives may be protected to not run malicious code. This means that users do not have the right to execute scripts directly from the drive. The script I NSTALL. SH can override this protection. The following error message may appear: / medi a/ Vi sual Env90/ I NSTALL. SH: / bi n/ sh: bad i nt er pr et er : Per mi ssi on deni ed
It means the drive is protected and has the “noexec” mount option. You can follow these instructions to get around: •
Copy I NSTALL. SH script in a temporary directory.
•
Execute it by giving the drive mount point as argument.
Troubleshooting
VISUAL-ENVIRONMENT © 2013 ESI Group
35
INSTALLATION GUIDE (released: Aug-13)
Example:
If / medi a/ Vi sual Env90 is the drive mount point: mkdi r i nst al l _t emp cd i nst al l _t emp cp / medi a/ Vi sual Env90/ I NSTALL. SH . . / I NSTALL. SH / medi a/ Vi sual Env90 ################################################################# ESI Gr oup Sof t war es GUI I nst al l at i on Manager Scr i pt Launcher Copyr i ght 1998 ~ 2013 ESI GROUP ################################################################# Cr eat i ng t empor ar y i nst al l er di r ectory. . . done. -------------------------------------------------------------------I nvoki ng i nst al l at i on of Vi sual - Envi r onment 9. 0 -------------------------------------------------------------------ESI Gr oup GUI I NSTALLATI ON MANAGER SCRI PT Copyr i ght 1998~2013, ESI GROUP Thi s sc r i pt manages t he gui sc r i pt s. To st ar t t he ESI Gr oup sof t war e i nst al l at i on ( f r om t he CD onl y) Type ' . / Pami nst - gui . sh' or ' . / Pami nst - gui . sh pami nst ' To st ar t t he l i cense management ( f r om t he t ar get di r ect or y onl y) Type ' . / Pami nst - gui . sh l i c' or ' . / Pami ns t - gui . s h i ns t al l _ l i c' s t i l l accept ed f or c ompat i bi l i t y. -------------------------------------------------------------------Unl oadi ng i nst al l at i on t ool s, 15 Mb ar e necessar y i n / t mp, pl ease wai t . . . Tool s r eady.
Only scripts files are copied in this temporary installer directory, archives containing the files to install are on the media.
Troubleshooting
INSTALLATION GUIDE (released: Aug-13)
36
VISUAL-ENVIRONMENT © 2013 ESI Group
The ESI Group Soft ware will not run.
If you cannot run ESI Group software because of the error " Cannot connect t o l i cense ser ver . . . Wi nSock er r or code"
or " War ni ng - 15 = Cannot connect t o l i cense ser ver . . . "
The FLEXnet License Server is not installed or is not running. •
In the Control Panel , under Services check if the FLEXnet License Server is listed as a service. It should be listed as: FLEXnet Li cense Ser ver
If the FLEXnet
St ar t ed
Aut omat i c
License Server is not listed:
•
Open a command window.
•
cd c:\flexlm
•
install c:\flexlm\lmgrd.exe
•
Check the Services list again.
•
Select the FLEXnet License Server .
•
Click the Start button.
•
The license server should start and the listing be updated.
If listed, but the status field is blank : •
Select the FLEXnet License Server .
•
Click the Start button.
Troubleshooting
VISUAL-ENVIRONMENT © 2013 ESI Group
37
INSTALLATION GUIDE (released: Aug-13)
Af ter launc h, Visu al-Env ir on ment behaves errati cally :
It is possible that some data stored in Application Data Folder(*) is corrupted. Rename this folder, re-launch Visual-Environment and continue working. Send the contents of the renamed folder to your local support teams for problem identification. Remark : This method may lose some personal customization of the environment. (*) Application Data Folder refers to: •
Li nux : di r ect or y $HOME/ . mwesi / 9_0
•
Wi ndows: di r ect or y %APPDATA%\ ESI \ 9_0
The license server should start and the listing must be updated:
Troubleshooting
•
If Visual-Environment crashes on Linux workstations, use the command “productname - cleanup” for cleanup.
•
While invoking the product on Linux, if you encounter an error which says “….Menu Not found”, try “ productname –newreg”.
•
On Linux, if the product aborts which invoking, clean up the /tmp directory.
•
Linux ‘focus policy' should be 'click to focus'; if it is set to ‘focus under mouse’ the application may not work.
INSTALLATION GUIDE (released: Aug-13)
38
VISUAL-ENVIRONMENT © 2013 ESI Group
SOFTWARE AUTHORIZATION The software is licensed by FLEXnet version 11.11.1 Floating license server must be upgraded with the latest delivered version of the toolkit, version 11.11.1
The license search order is done as follows: 1. PAM_LMD_LICENSE_FILE environment variable. 2. Linux: file $HOME/.flexlmrc Windows: registry key PAM_LMD_LICENSE_FILE in HKLM \ Software \ FLEXlm License Manager \. 3. LM_LICENSE_FILE environment variable. 4. Default license file location: Linux: $PAMHOME/licenses/pam_lmd.lic Windows: C:\flexlm\pam_lmd.lic You should be an authorized user to execute Visual-Environment on your system. Please check with your System Administrator to get the system information details. You must get a license from ESI to execute Visual-Environment. You need to provide the following information to obtain a license: •
Type of License (trial/demo/formal) - required
•
Machine ID - required
•
IP address of the machine.
•
Platform or machine type such as SGI, HP, SUN or NT - required
•
Port ID to be used for license access.
To obtain the machine ID, execute the following command in your system: •
HP: uname -i
•
IBM: uname -m
•
SUN: hostid
•
Linux: /sbin/ifconfig -a or /sbin/ip addr
•
Windows: ipconfig /all and provide ESI with the physical address from the list.
•
All platforms: lmhostid (tool provided in FLEXnet binaries).
Software Authorization
VISUAL-ENVIRONMENT © 2013 ESI Group
39
LICENSE REQUEST For license request, please contact the following address: ESI Group Parc d’Affaires Silic 99, rue des Solets - BP 80112 94513 Rungis Cedex - France Phone: +33 (0)1 49 78 28 00 Fax:
+33 (0)1 46 87 72 02
Email: [email protected] http://www.esi-group.com
License Request
INSTALLATION GUIDE (released: Aug-13)