Scania Engine Data 1588878

031110 031015

Section 5

Industrial & Marine Engines

Engine data Industrial diesels 12-series with EMS Contents Engine program.................................................................................................... 3 Standard equipment ............................................................................................. 3 Basic data ............................................................................................................. 4 Technical data and cooling equipment recommendation..................................... 6 DI12 54A, order ref. 10-70................................................................................ 6 DI12 56A, order ref. 10-71................................................................................ 8 DI12 56A, order ref. 10-72.............................................................................. 10 Basic dimensions DI12................................................................................................................. 12 Equipment list .................................................................................................... 14

Part No. 1 588 878

© Scania CV AB Sweden


2

Part No. 1 588 878

Industrial diesels 12-series with EMS

© Scania Industrial & Marine Engines

DHA Section 5.

031110



DHA Section 5.

Latest modification date: 031015

Engine program 12 series engines with EMS for all-speed applications IFN, 2100 r/min

DI12 54A, order ref 10-70 1)

kW (hp)

243 (330)

DI12 56A, order ref 10-71

kW (hp)

272 (370)

DI12 56A, order ref 10-72 2)

kW (hp)

280 (381)

1)

Optimized for Clark´s 36000 transmission 2) Optimized for Clark´s 42000 transmission All engines comply with Stage 2 EURO exhaust emission regulations. Ratings IFN:

Intermittent service

Descriptions of ratings and other power information, see “General”

Standard equipment Unit injectors and EMS Coordinator Main Supply Box Fuel filter cartridge Turbo charger Air-to-water charge air cooler (DI engines). Oil cleaner Oil filter Oil cooler Alternator: 1-pole, 65A, 28 V, incl. relay and connection for tachometer, see “Equipment data” Starter: 1-pole, 6.7 kW, 24 V, see “Equipment data” Flywheel, see “Equipment data” Silumin flywheel housing, SAE1 flange, see “Equipment data” Front mounted engine brackets, see “Equipment data”. Mainly for transportation purposes Operator’s manual

031110


Part No. 1 588 878

3



DHA Section 5.


Basic data General Configuration and number of cylinders Working principle Bore x stroke Displacement Compression ratio Firing order Piston speed at 1500 r/min at 1800 r/min Rotation, seen from flywheel end Moment of inertia with flywheel for 14” coupling Number of teeths on flywheel ring gear Weight approx., with fan but excl. oil and coolant

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 in-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 stroke mm . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 x 154 dm3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11,70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18:1 . . . . . . . . . . . . . . . . . . . . .1 - 5 - 3 - 6 - 2 - 4 m/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7,70 m/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9,24 . . . . . . . . . . . . . . . . . . . . Counter clockwise kgm2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,74 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 995

Lubrication system Oil capacity Oil consumption Oil change intervals Oil grade

Oil Pressure Normal Minimum permitted Oil temperature Maximum permitted Oil cleaner Filtration Oil filter for turbo charger Oil cooler

4

Part No. 1 588 878

dm3, min max g/kWh h

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 0,3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 . . . . . . . . . . . . . . . . . . CE or CF acc. to API CCMC D5 Acea E3-96

bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0,7 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 . . . . . . . . . . . . . . . . . Paper and Centrifugal Micron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Paper . . . . . . . . . . . . . . . . .Water cooled/Full flow


031110



DHA Section 5.


Injection system Type Governor Fuel filter

. . . . . . . . . . . . . . . Electronic Unit Injectors Scania Engine Management System (EMS) . . . . . . . . . . . . . . . . . . . Paper filter element

Cooling system dm3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 - 85 ..................................1 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Coolant volume, excl. radiator Coolant temperature Number of thermostats Opening temperature

Intake system Permissible pressure drop in intake system with cleaned or new filter Permissible pressure drop in intake system with blocked (dirty) filter

mmWc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mmWc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500

Electrical system, optional equipment Type Optional Starter, standard equipment Optional Alternator, standard equipment Optional

031110

. . . . . . . . . . . . . . . . . . . . . 1-pole, 24 V, DC . . . . . . . . . . . . . . . . . . . . . 2-pole, 24 V, DC . . . . . . . . . . . . . . . . . 1-pole, 24 V - 6.7 kW . . . . . . . . . . . . . . . . . 2-pole, 24 V - 6.7 kW . . . . . . . . . . . . . . . . . . . 1-pole, 28 V - 65 A . . . . . . . . . . . . . . . . . . . 2-pole, 28 V - 65 A . . . . . . . . . . . . . . . . . . . 1-pole, 28 V - 90 A


Part No. 1 588 878

5



DHA Section 5.


Technical data and cooling equipment recommendation DI12 54A, order ref. 10-70 Engine speed, r/min

Rating acc. to

1200

1500

1800

2100

Gross power

kW (hp)

IFN

187 (254)

237 (322)

240 (326)

243 (330)

Gross torque

Nm (kpm)

IFN

1488 (152)

1509 (154)

1273 (130)

1105 (113)

195 (143)

193 (142)

193 (142)

222 (163)

3/4 load

199 (146)

199 (146)

194 (143)

229 (168)

1/2 load

199 (146)

205 (151)

205 (151)

241 (177)

102

129

137

179

to exhaust gas

130

165

164

205

to surrounding air

21

21

21

24

Spec. fuel consumption full load

g/kWh (g/hph)

Heat rejection to cooling water

kW

Air consumption

kg/min

14

22

25

30

Exhaust flow

kg/min

15

23

26

31

502

437

388

398

°C

Exhaust temperature

IFN, 2100 r/min Air-on temp. 35 °C

50 °C

m2

1.0

1.0

kg

55

55

dm /min

420

420

Puller

Puller

Radiator front area weight Coolant pump flow

3

Fan type Ø

mm

787

787

power losses

kW

21

21

1

1

1:1.08

1:1.08

m3/s

9.8

9.8

mm Wc

35

30

number of drive belts (poly-V) speed ratio Air flow free air flow pressure reserve

6

Part No. 1 588 878


031110



DHA Section 5.


DI12 54A, order ref. 10-70 OUTPUT kW

280

380 hp 360

kW x 1.36 = hp

260 IFN 240

340 320 300

220

280 200 260 180

240 220

160 Max torque 1589 Nm/1400 r/min

TORQUE Nm Nm ---------- = kpm 9,81

1600

160 kpm

1400

140 IFN

1200 1000

120 100

IFN 220 SPECIFIC FUEL CONSUMPTION g/kWh g ⁄ kWh ------------------ = g ⁄ hph 1,36

031110

160 g/hph

210 150

200 190 1200

1400

1600

1800


2000

140 2200 r/min

Part No. 1 588 878

7



DHA Section 5.



Rating acc. to

1200

1500

1800

2100

Gross power

kW (hp)

IFN

200 (272)

272 (370)

272 (370)

272 (370)

Gross torque

Nm (kpm)

IFN

1592 (162)

1732 (177)

1443 (147)

1237 (126)

197 (145)

190 (140)

192 (141)

214 (157)

3/4 load

202 (149)

200 (147)

197 (145)

224 (165)

1/2 load

207 (152)

206 (151)

207 (152)

238 (175)

109

138

145

180

to exhaust gas

143

186

186

222

to surrounding air

23

24

23

26


g/kWh (g/hph)


kW

Air consumption

kg/min

14

22

27

33

Exhaust flow

kg/min

15

23

28

34

549

464

401

393

°C

Exhaust temperature


50 °C

m2

1.0

1.0

kg

55

55

dm /min

420

420

Puller

Puller


3

Fan type Ø

mm

787

787

power losses

kW

21

21

1

1

1:1.08

1:1.08

m3/s

9.8

9.8

mm Wc

35

30


8

Part No. 1 588 878


031110



DHA Section 5.



300 400 hp

kW x 1.36 = hp

IFN

280

380 360

260 340 240 320 300

220

280 200 260 180

240 Max torque 1780 Nm/1400 r/min

TORQUE Nm Nm ---------- = kpm 9,81

1800

180 kpm

1600

160

1400

IFN

1200

140 120

IFN

160 g/hph

210 SPECIFIC FUEL CONSUMPTION g/kWh g ⁄ kWh ------------------ = g ⁄ hph 1,36

031110

150

200

140

190 180 1200

1400

1600

1800


2000

2200 r/min

Part No. 1 588 878

9



DHA Section 5.



Rating acc. to

1200

1500

1800

2100

Gross power

kW (hp)

IFN

224 (305)

294 (400)

294 (400)

280 (381)

Gross torque

Nm (kpm)

IFN

1783 (182)

1872 (191)

1560 (159)

1273 (130)

200 (147)

193 (142)

196 (144)

217 (160)

3/4 load

201 (148)

199 (146)

195 (143)

223 (164)

1/2 load

205 (151)

204 (150)

205 (151)

237 (174)

127

155

163

198

to exhaust gas

160

206

210

240

to surrounding air

26

26

26

28


g/kWh (g/hph)


kW

Air consumption

kg/min

15

23

28

33

Exhaust flow

kg/min

16

24

29

34

567

486

431

425

°C

Exhaust temperature


50 °C

m2

1.0

1.0

kg

55

55

dm /min

420

420

Puller

Puller


3

Fan type Ø

mm

787

787

power losses

kW

21

21

1

1

1:1.08

1:1.08

m3/s

9.8

9.8

mm Wc

25

20


10

Part No. 1 588 878


031110



DHA Section 5.



300 400 hp

kW x 1.36 = hp

280

380 IFN 360

260 340 240 320 300

220

280 200 260

2000 TORQUE Nm Nm ---------- = kpm 9,81

Max torque 1937 Nm/1400 r/min

190 kpm

1800

180

1600

160 IFN

1400 1200

120 IFN

220 SPECIFIC FUEL CONSUMPTION g/kWh g ⁄ kWh ------------------ = g ⁄ hph 1,36

031110

140

160 g/hph

210 150

200 190 1200

1400

1600

1800


2000

140 2200 r/min

Part No. 1 588 878

11

DHA Section 5.


Industrial & Marine Engines Latest modification date: 030401

Basic dimensions DI12 Function of xyz-coordinates is found in “Equipment data”. 1. Fuel inlet (Insert connection for plastic pipe Ø 12 mm)* 2. Fuel return (Insert connection for plastic pipe Ø 12 mm)* 3. Air intake (Ø 101.6 mm)

x ~ -783 y ~ -296 z ~ +414

x y z

-947 +293 +359

4. Exhaust outlet

x y z

-702 +293 +359

5. Oil filler*

x y z

-1077 -73 +676

x y z

-634 -58 -437

x y z

-1259 +365 +79

x y z

-1111 +278 +465

x y z

-1177 +287 +337

2

6. Oil dipstick* 7. Oil drain plug 8. Connection for engine speed sensor (2x) 9. Coolant inlet (pipe Ø 57 mm) 10. Coolant outlet (pipe Ø 57 mm) 11. Drain tap for coolant 12. Connection to expansion tank (pipe Ø 32 mm) 13. To cab heater inlet 14. From cab heater outlet 15. Oil pressure sensor 16. Connection for coolant temperature sensor/monitor (2 x M14x1.5)*

z-

z

z+

x ~ -325 y ~ -296 z ~ +103

15

1 7

8

4

x-

x

10

3

x+

5

12

14 9

x+

x

x-

11

16

6

*Further information in “Equipment data”.

z-

z

z+

13

y-

12

Part No. 1 588 878


y

y+

031110

DHA Section 5.




Dimensional drawing DI12 252

779

399

1434 - 1456 depending on fan type

Drawing No. 1 520 626 This sketch is intended only as general sales information and must not be used for any installation purposes. See also “General” * The values for center of gravity applies for engines with standard equipment including coolant. Cooling equipment such as fan, fanring and protective grating are not included.

403

379

~ 210*

~ 0*

396

~ 610*

031110


360

Part No. 1 588 878

13



DHA Section 5.


Equipment list S = Standard equip., O = Optional equip. Technical descriptions of references, see “Equipment data”.

10

ENGINE WITH STANDARD EQUIPMENT

Ref

Description

-70

DI12 54A DI12 56A DI12 56A

-71 -72

36

37

41

45

46

Drw No.

243 (330) 272 (370) 280 (380)

1 520 626 1 520 626 1 520 626

MAIN SUPPLY BOX -02 S Cable harness, length 2 meter -03 O Cable harness, length 8 meter -04 O Cable harness, length 12 meter

1 505 526 1 505 526 1 505 526

COORDINATOR -02 S With

1 505 545

THROTTLE CONTROL -30 S Without -31 O Accelerator position sensor + cable harness 2 meter -32 O Accelerator position sensor + cable harness 8 meter

1 364 185 1 364 185

FLYWHEEL -01 S For use with truck clutch -10 O SAE 14” -11 O For Clark 15/16”

Pilot hole Ø 62 mm Pilot hole Ø 80 mm Pilot hole Ø 52 mm

FLYWHEEL HOUSING -01 S Measurements according to SAE1

Material: Silumin

49 -01 -19 -21 -22 -25 -26 -27 -28

14

IFN, kW (hp)

ENGINE SUSPENSION S Front mounting brackets O Fixed suspension, low O Fixed suspension, power pack type O Fixed suspension, power pack type O Stiff rubber suspension, low O Stiff rubber suspension, low O Stiff rubber suspension, power pack type O Stiff rubber suspension, power pack type

Part No. 1 588 878

Front brackets only Front suspension only Front suspension only


1 402 380 (B) 1 390 317 (B) 1 521 690

1 403 464

1 402 865 1 402 865 1 402 865 1 402 865 1 402 865 1 402 865 1 402 865 1 402 865

031110



DHA Section 5.

S = Standard equip., O = Optional equip. Technical descriptions of references, see “Equipment data”.

51

AIR CLEANER

Ref -01 -25 -45

Description

Drw No.

S Without O Light duty, with paper insert. Filter area 10.6 m2 O Medium duty, with paper insert and precleaner. Filter area 16 m2

For separate mounting

1 399 298

For separate mounting

1 399 298

51A SAFETY CARTRIDGE FOR AIR CLEANER -00 S Without -01 O Safety cartridge for medium duty air Only for 51-45 cleaner 55

56

1 399 298

TURBO CHARGER -02 S Side mounted turbo charger, low -21 O Side mounted turbo charger, high EXHAUST PIPE -00 S Without -11 O Pointing rearwards -21 O 90° bend

57 -00 -40 -41 -42 -43 -51 -52 -53 -54

58 -00 -31 -32 -33 -34 -36 -37

031110

1 403 464 1 405 277

With exhaust brake, req 55-02 Ø 114, adjustable direction.

1 424 506 1 424 507

EXHAUST FITTINGS, shipped loose O Without S Flange O Flange O Flange O Flange O Flange and compensator O Flange and compensator O Flange and compensator O Compensator for exhaust brake

Ø 89-102, not with 56-21 Ø 114, requires 56-21 Ø 130, requires 56-21 Ø 155, requires 56-21 Ø 114, requires 56-21 Ø 130, requires 56-21 Ø 155, requires 56-21 Requires 56-11

1 383 334 1 383 334 1 383 334 1 383 334 1 383 334 1 383 334 1 383 334 1 383 334

SILENCER, shipped loose S Without O Truck type with clamps O Truck type with flanges O Truck type with flanges O Truck type with flanges O Industrial type, with flanges O Industrial type, with flanges

Ø 115 Ø 115 Ø 130 Ø 155 Ø 130, straight outlet Ø 155, straight outlet

1 331 676 1 331 676 1 331 676 1 331 676 1 379 683 1 379 683


Part No. 1 588 878

15



DHA Section 5.


60

OIL SUMP

Ref

Description

-05

S Deep front oil sump

-06

O Deep front oil sump

-07

O Low oil sump

Drw No.

Oil dipstick on left or right hand side. Drain plug on low left hand side. Oil dipstick on right hand side. Drain plug on low left hand side. Equipped for checking oil level with running engine. Oil dipstick on left or right hand side.

60A OIL DIPSTICK -01 S On right hand side (in oil sump) -02 O On left hand side in engine block. 61 -01 -02 -03 -03A

62 -01 -10 -11 -12

66

OIL DRAINING S With magnetic drain plug O With hand pump O With hand pump O With hand pump

CRANKSHAFT PULLEY -00 S Standard -14 O With 2 extra grooves

1 422 908

1 422 908

Not with 60-07

1 407 418 1 407 418

Not with 60A-02 or 60-07 Not with 60-07

1 403 464 1 407 419 1 407 419

Not with 60-07

Under Right hand side (delivered loose) Left hand side (delivered loose) With tap (delivered loose)

1 403 464 1 407 848 1 407 848 1 407 848

Ø 260 mm. For fan ratio 1:1,08 only

1 404 595

-15

O With 2 extra grooves

Ø 192 mm. For fan ratio 1:1,08 only

1 404 595

-16

O With 3 extra grooves O For poly-V belt

Ø 260 mm. Without fan only Ø 260 mm. For fan ratio 1:1,08 only

1 404 595 1 404 595

-17

16

OIL FILLER S In valve cover O On left hand side (in engine block) O In valve cover and on left hand side (in engine block), 1:st cyl O In valve cover and on left hand side (in engine block), 5:th cyl

1 422 908

Part No. 1 588 878


031110



DHA Section 5.


72

FAN

Ref -01 -02 -03 -07 -08 -09 -10 -19 -20

75 -00 -21 -22 -25

Description

S O O O O O O O O

Without fan Prepared for fan Prepared for fan Puller Pusher Puller Pusher Puller Pusher

RADIATOR AND FAN COVER S Without O 0.75 m2 Not for DC engines O 0.75 m2 Not for DC engines O 1.0 m2

-26

O 1.0 m2

-35

O 1.2 m2 Not for DC engines O 1.2 m2 Not for DC engines

-36

Drw No.

75A LEVEL MONITOR -00 S Without -13 O Level monitor in expansion tank 76

80

Without radiator Ratio 1:1 Without radiator Ratio 1:1,08 Without radiator Ø 711 mm, ratio 1:1,08 Ø 711 mm, ratio 1:1,08 Ø 787 mm, ratio 1:1,08. Not with 92A Ø 787 mm, ratio 1:1,08. Not with 92A Ø 787 mm, ratio 1:1. Req alternator Ø 787 mm, ratio 1:1. Req alternator

1 385 758 1 385 757 1 385 760 1 385 759 1 385 760 1 385 759

With fan cover for fan Ø 711 mm

1 407 843

With fan cover for fan Ø 711 mm, frame and front grating With fan cover Not for fan Ø 711 mm With fan cover, frame and front grating. Not for fan Ø 711mm With fan cover, Not for fan Ø 711 mm and Ø 787 mm With fan cover, frame and front grating. Not for fan Ø 711 mm and Ø 787 mm

1 407 843

1-pole, with 75- only

FAN RING -00 S Without -21 O Fan ring with sealing -22 O As 76-21 but with protective grating STARTER -05 O Without -11 S 1-pole -14 O 2-pole

031110

1 407 843 1 407 844 1 413 544 1 413 545

1 342 316

1 407 485 1 407 485

6.7 kW 6.7 kW


1 413 727 1 413 727

Part No. 1 588 878

17



DHA Section 5.


81

ALTERNATOR

Ref -03 -20 -22 -25

82

89

O S O O

Drw No.

Without 1-pole 2-pole 1-pole

65 A 65 A 100 A

INSTRUMENT PANEL -01 S With connector kit -40 O Panel, 2-pole -41 O Panel, 2-pole with cupboard

ENGINE HEATER -00 S Without -11 O 1100W / 220V, plug-in type -23 -24

90

Description

O 500W / 220V, external O 1500W / 220V, external

Req 80-, 81-

Approved for use in Sweden, Norway, Finland, Germany and Austria Approved for use in Sweden, Norway, Denmark, Finland, Germany, Austria, Switzerland, Iceland, Holland and Belgium

FRONT MOUNTED POWER TAKE-OFF Important! Max. total torque capacity for front end of crankshaft is 1200 Nm. Total torque demands for coupling and drive must never exceed this value. -00 S Without -20 O Stub shaft for connection of flexible For engine without fan only coupling Not with 66-15 or -17 Max torque 635 Nm

SIDE MOUNTED POWER TAKE-OFF -00 S Without -13 O 1,19 x engine speed -13A O Prepared for side mounted PTO

1 404 225 1 404 225 1 516 176

1 505 526 1 505 510 1 505 510 / 1 462 237

1 412 624 1 407 215 1 407 215

1 404 875

91

92

AIR COMPRESSOR -00 S Without -01 O 2-cylinder, liquid cooled, incl unloader valve

92A AC COMPRESSOR -00 S Without -01 O With 18

Part No. 1 588 878

SAE B, 2-hole, 13 teeth Note! see sect.7

1 405 720 1 376 355

Capacity 380 - 600 l/min at 2100 r/min. Air inlet not connected

1 520 638

Not with 72-09, -10

1 404 227


031110



DHA Section 5.


93

HYDRAULIC PUMP

Ref -00 -12 -13

95

Description

Drw No.

S Without O Capacity: 16 l/min at 150 bar int., 25-30 bar cont. O Capacity: 22 l/min at 150 bar int., 25-30 bar cont.

PROTECTION COVERS -01 S Standard -04 O With covers for drive belts. -04 O With covers for drive belts.

98B CORRISION PROTECTION -00 S Without -01 O 10 litre corrosion inhibitor. 98C FUEL PRE-FILTER C-00 O Without fuel pre-filter

C-01 C-02

Without pressure reduction valve

1 404 226

Without pressure reduction valve

1 404 226

with 81- (alternator), Not with 72without 81- (alternator), Not with 72-

1 432 956 1 431 749

(mix water 90% with inhibitor 10%.)

Requires a pre-filter from an external manufacturer. If no filter is mounted, the engine warranty is not valid.

S Fuel pre-filter with water separator O Fuel pre-filter with water separator and heater

1 407 701 1 407 701

98P CONVERTER OIL COOLER -01 S Without -02 O Connection for converter 99 A-01 L-31 L-36 L-38 N-01 Q-31 Q-32 Q-33

031110

SPECIAL EQUIPMENT O Tool kit S Crankcase ventilation O Crankcase ventilation O Crankcase ventilation O Scania International Service O With parts catalogue x1 O With parts catalogue x2 O With parts catalogue x3

1 424 243

Open, direction downwards In valve cover, for external connection Internal ventilation


1 405 725 1 405 359

Part No. 1 588 878

19



DHA Section 5.

Ideas and opinions about this book? The ambition with this book is to give you all the information you may need working with Scania engines. However, there can be parts of this book that could be described in another way or some information you wish to be added. When you have suggestions for improvements, or you find faulty information, please copy this page, write down your opinions and send by telefax or mail to the adress below. Your remarks may help us to further improve the following editions. Thank you in advance for your co-operation

Sender: Suggestion / Remark:

Mail to

Scania CV AB Industrial and Marine Engines Dept. IMS S-151 87 Södertälje, Sweden

Telefax

Sales After sales

+46 - 8 55 38 29 93 (int) 08 55 38 29 93 (nat) +46 - 8 55 38 98 12(int) 08 55 38 98 12(nat)

Telephone +46 - 8 55 38 10 00 (int), 08 55 38 10 00 (nat) 20

Part No. 1 588 878


031110

Scania Engine Data 1588878

Recommend Documents