acl Proxy List commands that can be run on PIU acc proxy action Execute command pmx -m 2 e1phy Check E1 performance for 2 Hrs get txdevice get Txdevice definition per tx board lget TransportNetwork=1,AtmPor TransportNetwork=1,AtmPort=1-1-ima1,VplTp=vp1,Vpc t=1-1-ima1,VplTp=vp1,VpcTp=1,VclTp=vc Tp=1,VclTp=vc atmTrafficDe scriptorId To check defined VCs lget TransportNetwork=1,AtmPor TransportNetwork=1,AtmPort=ES-2-24-3,VplTp=vp1,Vp t=ES-2-24-3,VplTp=vp1,VpcTp=1,VclTp=vc409 cTp=1,VclTp=vc409 atmTraff icDescriptorId To check defined VCs on RNC get aal2ap=b4670 Print aal2 Routing case get gsmrelation=10ga selec Check GSM Relation get utranrelation=10ga selec Check UMTS Relations pmom utrancell pmx utrancell=751g pmTotNoRrcConnectReq pmxh -s 20100409.0800 -e 20100409.1000 20100409.1000 utrancell=582G utrancell=582G pmCell DowntimeMan|pmCell DowntimeMan|pmCell DowntimeAuto get max ======== to change HScodes (7.2Mbps=Hscodes-10) acl synch acc 10 addsynchref Subrack=1,Slot=1,PlugInUnit=1,Cbu=1,ExchangeTe Subrack=1,Slot=1,PlugI nUnit=1,Cbu=1,ExchangeTerminal=1,E1PhysPathTerm=p rminal=1,E1PhysPathTerm=pp2 p2 rxmdp:mo=rxocf-cf; radrp:dev=rhdev-..... to get RP blrpi:rp-335,forced; ......to block RP - then deblock. blrpe:rp-335; RBS lst vc ded.
to confirm if TN Script is loa
lt all to load all MO( managed object ) cab to view all board cabx to view all board including te mperature cabm to view all board including me mory st plugin to see the status all the plug in unit alt to view alarm lga to view alarm log lge to view event log llog to check restarted data bl to block cell (block proxy) deb to unlock cell pmr will show statistics get radiolink to check the number of user fo r every sector get rbslocalcell to check the status of cell en able/disable get sync to see the synchonization of N ode B acc 0 restart restart Node B (Warm/Cold) acc 010600 restart restart AIUB sector 1 (3202) acc 010900 restart restart AIUB sector 2 (3202) acc 011200 restart restart AIUB sector 3 (3202) lhsh 001200 ps port* VSWR ( Choose the TMA port ) ( 3206) *pls use this command to get the right port or TMA
VSWR for sector 1 (3206)
* this only measure between ASC to Ant
enna lhsh 001200/port_5_dev_13 asc vswr is only measure between ASC to Antenna lhsh 001200/port_9_dev_15 asc vswr is only measure between ASC to Antenna lhsh 001200/port_1_dev_12 asc vswr is only measure between ASC to Antenna lhsh 001200/port_5_dev_14 asc vswr is only measure between ASC to Antenna lhsh 001200/port_9_dev_16 asc vswr is only measure between ASC to Antenna lhsh 010200/port_0_dev_13 mcpaBoard temp r 1) lhsh 010200/port_0_dev_13 restart ) lhsh 010200/port_0_dev_13 mcpaBoard temp r 2) lhsh 010200/port_0_dev_13 restart ) lhsh 010200/port_0_dev_13 mcpaBoard temp r 3) lhsh 010200/port_0_dev_13 restart ) lhsh 010600/port_0_dev_18 asc vswr is only measure between ASC to Antenna lhsh 010900/port_0_dev_20 asc vswr is only measure between ASC to Antenna lhsh 011200/port_0_dev_22 asc vswr is only measure between ASC to Antenna lhsh 001200/port_0_dev_5 fui get dev stat A&B)Sector 1 (3206) lhsh 001200/port_4_dev_6 fui get dev stat A&B)Sector 2 (3206) lhsh 001200/port_8_dev_7 fui get dev stat A&B)Sector 3 (3206) lhsh 010600 te log read r 1 (3202) lhsh 010900 te log read r 2 (3202) lhsh 011200 te log read r 3 (3202) lt ret lst ret pr retdevice actl oice either one frm 1401/1402/1403 ) (Step 4) actc oice either one frm 1401/1402/1403 ) (Step 5) actc 1403 forceCalibration 2/1403 )Sector 1/Sector 2/Sector 3 (Step 6) get 0 cvls get jumper get feeder get feeder Attenuation ector ) st plug diff get config
VSWR for sector 2 (3206)
* th
VSWR for sector 3 (3206)
* th
VSWR for sector 1 (3206)
* th
VSWR for sector 2 (3206)
* th
VSWR for sector 3 (3206)
* th
to check MCPA temp (3202 Secto to restart MCPA (3202 Sector 1 to check MCPA temp (3202 Secto to restart MCPA (3202 Sector 2 to check MCPA temp (3202 Secto to restart MCPA (3202 Sector 3 VSWR for sector 1 (3202)
* th
VSWR for sector 2 (3202)
* th
VSWR for sector 3 (3202)
* th
to check current at FU (branch to check current at FU (branch to check current at FU (branch to read log file for AIU Secto to read log file for AIU Secto to read log file for AIU Secto Calibrate RET (Step 1) List RET device (Step 2) get RET proxy (Step 3) Action list =Proxy = 1403 ( Ch Action call =Proxy = 1403 ( Ch Choice either one frm 1401/140 RBS Type CV's Data (list of Cv's) For jumper Attenuation For Feeder Attenuation For Feeder Attenuation ( All S list plug in unit status Compare two Mos Overall Configuration In ( Nod
e B & RNC ) st atmport / lst e1 lst plug 1 e lst plug 0 pget phys get ipatmlink us cvms backup_April_2007 cvset
get sector longitude r get sector latitude acc ip listroutes acc vcl eteloopback n all vcltp's (look out for result=false) ntpconfig info ynchronized to the NTP servers lhsh 000100 vols lhsh 000100/port_0_dev_13 fantemp ubrack lhsh 000100/port_0_dev_13 fancount 0 ubrack lhsh 000100/port_0_dev_13 fancount 1 ubrack lhsh 010100/port_0_dev_7 fantemp ubrack lhsh 010100/port_0_dev_7 fancount 0 ubrack lhsh 010100/port_0_dev_7 fancount 1 ubrack lhsh 010200/port_0_dev_17 fantemp ubrack lhsh 010200/port_0_dev_17 fancount 0 ubrack lhsh 010200/port_0_dev_17 fancount 1 ubrack
To check E1 state in Node B To check unlocked board in nod To check locked board in node Error Counter (pmEs/pm SEs) to check IP over atm link stat to create cv
cvms
to change the startable CV to get longitude for all secto to get latitude for all sector List the IP routing table perform an atm loopback test o will indicate if the node is s to check volume for CBU to check fans on top of BBIF s to check fans on top of BBIF s to check fans on top of BBIF s to check fans on top of RFIF s to check fans on top of RFIF s to check fans on top of RFIF s to check fans on top of MCPA s to check fans on top of MCPA s to check fans on top of MCPA s
OJRXI1> h
Check status of following MOs RNCxy> st plug // states of the boards RNCxy> st iub // RNC RBS Interface link RNCxy> st atmport // All ATM Ports RNCxy> st sync // Synchronisation RNCxy> st aal0 // ATM Synchronisation RNCxy> st aal2 // CS RNCxy> st aal5 // PS RNCxy> st st unisaal // Used by by NBAP pr protocol to towards RB RBS RNCxy NCxy> > st st nni nnisa saal al // Use Used by by MTP MTP, , SC SCCP and RANAP ANAP tow towards ards CN, CN, AND AND MTP, MTP, SCC SCCP and RNSAP towards another RNC RNCxy> st st ccdevice // common channel devices
RNCxy> st dcdevice // dedicated channel devices RNCxy NCxy> > st st pdr pdrdevi device ce // pac packet ket data data rou router ter devi device ces s RNCxy> st packet // Packet Data Router RNCxy> RNCxy> st st iurccd iurccdevi evice ce // commo common n channe channel l device devices s for Iur Inte Interfa rface ce (for (for P2.0 P2.0 th ese should be blocked) RNCxy> st spm // Special Purpose Processor Modules RNCxy> st spb // also shows device to SPB board relationship RNCxy> RNCxy> st etm1 etm1 // ET-M1 ET-M1 conn connect ection ions s (2Mb (2Mbps) ps) RNCxy> RNCxy> st etm4 etm4 // ET-M ET-M4 4 conne connecti ctions ons (155Mb (155Mbps) ps) RNCxy> st mtp // MTP signalling on Iu and Iur interfaces RNCxy> st sccp // SCCP signalling on Iu and Iur interfaces RNCxy> RNCxy> st ranap // CN-RNC CN-RNC protocol, protocol, 1 for for CS and 1 for PS RNCxy> st nbap // RNC-RBS protocol (Iub) RNCxy> RNCxy> st rnsap // RNC-RNC RNC-RNC protocol protocol (Iur) (Iur) used for Handover Handover RNCx RNCxy> y> st utra utranc ncel ell l // Cell Cell Stat Status us - sho shoul uld d be be UNL UNLOC OCKE KED D ENA ENABL BLED ED RNCxy> get 'Cell Proxy'
// more info about particular MO
-------------------------------------------------------------------- BASIC MO COMMANDS -------------------------------------------------------mom[tc] Print description of MO classes, CM/FM attributes, actions , enums and structs. lt/ltc[1-9] Load MO tree (full or partial) and build proxy table. lc[1-9]/lcc Load MO tree (full or partial) and build proxy table. lu/llu Unload MOs from MO tree. pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell. ma/lma Add MO(s) to an MO group. mr/lmr Remove an MO group or remove MOs from an MO group (MOs wil l NOT be deleted, only the group). mp Print all defined MO groups. get/lget Read CM/FM attribute(s) from MO(s). hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute). kget/lkget Display CM/FM attributes in exportable printout format. fro/lfro[m] Read MAO data of an MO and/or froid of the MO. Data read f rom SQL tables motype_r1 and modata_r2. st/lst Print state of MOs (operationalState and administrativeSta te when applicable). prod Print productData of MO(s). lk/llk View all MO's linked to an MO, and their states (admState and opState). lko/llko The old lk. Messier than lk but supports a wider range of MO classes. set[m]/lset[m] Set an attribute value on one or several MO's. rset/lrset Set attribute value on a restricted attribute or change th e MOid of an MO. bl[s]/lbl[s] Lock or soft-lock MO(s). deb/ldeb Unlock MO(s). acl/lacl Lists available MO actions. acc/lacc Execute an MO action. cr Create an MO. del/ldel Delete MO(s). rdel/lrdel Delete MO(s) together with children and reserving MOs. u+[s]/u-/u?/u! Handling of undo mode (for undo of del/rdel/set commands). Can be used for generation of MO scripts as well. run Run a command file in moshell format. trun[i] Run a command file in EMAS/MoTester format. ctrl-z Abort an MO command or a "for" loop. Type "touch /tmp/;fg" to resume the moshell session.
pol[s] Poll the node until the CM service is up. re[i] Disconnect and reconnect to the CM service (mobrowser) and /or the PM service (pmtester). getmom Check the MOM version currently stored on the node. parsemom Parse an xml MOM file. flt/fltc Load proxys for an MO type that is not defined in the MOM. ("Force" lt/ltc). ld Load one MO from the tree and add to the proxy table. fget/lfget Read attributes that are not described in the MOM ("Force" get). sget/lsget Read CM/FM attributes from MO(s), one by one ("Slow" get). fset/lfset Set an attribute that is not described in the MOM ("Force" set). facc/lfacc Perform actions that are not defined in the MOM ("Force" a ction). -------------------------------------------------------------------- OTHER MO COMMANDS -----------------------------------------------------cvls/cvmk/cvms/cvset/cvrm/cvcu/cvls1 cvls/cvmk/cvms/cvset/c vrm/cvcu/cvls1 ConfigurationVersion (CV) handling. inv[hr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc. cab[slxradgtm] Display of miscellaneous COLI printouts relating to hw, sw , restarts, leds, cpu load, errors, disk/ram usage stc[p][r] Display state and configuration of AtmCrossConnections. std Display state and configuration of devices (RNC and MGW on ly). stv[b][r] Display state, user, and bandwidth usage for ATM ports and channels. stt[r] Display state and user of Physical Ports and Ds0Bundles. hc Run a general healthcheck on the node. diff/ldiff Parameter auditing or MO dump comparisons. str[12ft] Print status of the IubLinks/AbisLinks and their associate d Cells and Channels (RNC/BSC only). lki Resource usage and configuration of IubLinks (RNC only). remod[u][2] Remodule an IubLink (RNC only). tg[r][c][d] Print Resource Object information for all MOs in LmCell (R NC only). uer Print UE context data for all active calls (RNC only). ced[h][r] Print dynamic cell data or capacity usage (RNC only). al[atk] Print the list of active alarms. lg[aevsmircdyuolh] Fetching and processing of logs (alarm, event, availabilit y, system, etc) -------------------------------------------------------------------- OTHER COMMANDS -------------------------------------------------------uv Print or change moshell configuration settings (also calle d "user variables"). pv Print scripting variables. !/l Execute a unix command on the PC/workstation. l+[m][m][s][o]/l-/l? Open/close moshell logfiles. ose/coli command Send a COLI command to the node's OSE shell. Type "h ose" for syntax help and "?" to view available commands. bo[r]/ba[swdp]/br[wd]/be[0-50]/bp bo[r]/ba[swdp]/br[wd]/ be[0-50]/bp Manage board groups that can be used for runn ing COLI commands on multiple boards. lh Run COLI commands on all boards of a board group. mon/mon+/mon-/mon? Start/stop/check the target monitor server on the node and /or start the monitor client for one or more board Group(s). sql+/sql-/sql? Start/stop/check the SQL client on the node (CXC1325608). pgu[c][f] Program Upgrade. For STP use only, eg, to load black LMs. ftree[f] Recursive listing of a directory on the node's file system (equivalent to "ls -lR" in unix). ftget[c]/ftput[c] Transfer files or directories to/from the node, using ftp.
htget Transfer files from the node using http. edit Edit a file on the node. fclean[f|ff|d|e] Removal of obsolete loadmodules OR recursive removal of a directory on the node. hi Print history of moshell commands entered during the curre nt session. lmid[c] Print translation of loadmodule product number or T&E erro r codes. p/w/pw/b Change moshell prompt and/or window title. prox Toggle display of proxy identities in printout of get command. col Toggle display of colors. ul Toggle display of userlabel in st/lst and pget/lpget print out. conf[bld] Toggle confirmation on various MO commands. gs/gsg Toggle display of old/new attribute value in set/bl/deb co mmands. ip2d/d2ip Convert an IP address into the format used in the fRO (sql database) or vice-versa. h2d/d2h Convert an integer to hexadecimal or viceversa. h2b/b2h Convert a binary to hexadecimal or viceversa. wait Specify a delay in hrs, mins, secs, or rops. Similar to th e unix "sleep" command (scripting). return Exit from a command file without exiting from moshell (scr ipting). print Print a line or variable (scripting). alias/unalias Print or define command aliases. q/by/exit/quit Exit moshell. -------------------------------------------------------------------- PM COMMANDS -------------------------------------------------------pmom[ac]/lmom[c] Print description of PM counters (pmom) or log attributes (lmom, CDMA only). pget/lpget Read PM attribute(s) from MO(s). hpget[c]/lhpget[c] Read PM attribute(s) from MO(s), print horizontally one li ne per MO (instead of one line per attribute). pdiff/lpdiff Print incrementation of PM attributes. pmx[hfdn] Display counter values, extracted from the statistics ROP files. pmr[ag] Produce PM KPI reports, based on counter values in statist ics ROP files and formulas in CPI documentation. pme[fd][cgu] Fetch/decode event ROP files (RNC/RBS only). pst List all PM scanners and their state. pgets[n] Print scanner contents. pcr[cfd]/lpcr[cfd] Create a statistics scanner. pbl Suspend a scanner. pdeb Resume a scanner. pdel Delete a scanner. emom Display list of events available for each kind of event-ba sed scanner. pset[d] Set the contents of an event-based scanner (RNC/RBS only). -------------------------------------------------------------------- HELP CHAPTERS -------------------------------------------------------0 Installation, security, and user settings 1 Revision History 2 Tutorial 3 Command syntax, regular expressions 4 Command descriptions 5 Lazy 6 Scripting 7 Utilities
8 9
Server Maintenance Offline Mode
Type: - h to view command description, e.g: h pget - h to view commands whose description match a string, e .g: h change.*prompt - h to view a chapter, e.g: h 3 OJRXI1> m *********************************************************************** ********************************************** ********************************** ********* ******************** Command Name Purpose (type "h " for detailed help on a command ) ********************************************** ********************** ************************************************* ********************************** ********* ******************** mom[tc] Print description of MO classes, CM/FM attributes, actions , enums and structs. lt/ltc[1-9] Load MO tree (full or partial) and build proxy table. lc[1-9]/lcc Load MO tree (full or partial) and build proxy table. lu/llu Unload MOs from MO tree. pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell. ma/lma Add MO(s) to an MO group. mr/lmr Remove an MO group or remove MOs from an MO group (MOs wil l NOT be deleted, only the group). mp Print all defined MO groups. get/lget Read CM/FM attribute(s) from MO(s). hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute). kget/lkget Display CM/FM attributes in exportable printout format. fro/lfro[m] Read MAO data of an MO and/or froid of the MO. Data read f rom SQL tables motype_r1 and modata_r2. st/lst Print state of MOs (operationalState and administrativeSta te when applicable). prod Print productData of MO(s). lk/llk View all MO's linked to an MO, and their states (admState and opState). lko/llko The old lk. Messier than lk but supports a wider range of MO classes. set[m]/lset[m] Set an attribute value on one or several MO's. rset/lrset Set attribute value on a restricted attribute or change th e MOid of an MO. bl[s]/lbl[s] Lock or soft-lock MO(s). deb/ldeb Unlock MO(s). acl/lacl Lists available MO actions. acc/lacc Execute an MO action. cr Create an MO. del/ldel Delete MO(s). rdel/lrdel Delete MO(s) together with children and reserving MOs. u+[s]/u-/u?/u! Handling of undo mode (for undo of del/rdel/set commands). Can be used for generation of MO scripts as well. run Run a command file in moshell format. trun[i] Run a command file in EMAS/MoTester format. ctrl-z Abort an MO command or a "for" loop. Type "touch /tmp/;fg" to resume the moshell session. pol[s] Poll the node until the CM service is up. re[i] Disconnect and reconnect to the CM service (mobrowser) and /or the PM service (pmtester). getmom Check the MOM version currently stored on the node.
parsemom flt/fltc ("Force" lt/ltc). ld fget/lfget get). sget/lsget fset/lfset set). facc/lfacc ction).
Parse an xml MOM file. Load proxys for an MO type that is not defined in the MOM. Load one MO from the tree and add to the proxy table. Read attributes that are not described in the MOM ("Force" Read CM/FM attributes from MO(s), one by one ("Slow" get). Set an attribute that is not described in the MOM ("Force" Perform actions that are not defined in the MOM ("Force" a
Type: - h to view command description, e.g: h pget - h to view commands whose description match a string, e .g: h change.*prompt OJRXI1>