Instruction Manual for EMT777 Digital timer 1.)Main functions To pre-set specific on/off times ,control different power on/off period, I t works with different appliances;such as lamps,coffee machines,heaters,so as to save energe,antomatically control appliances and guard from theft.
●
●
The design is a break-through of conventional digital timers.With the latest concept of having two easy buttons,with a "MENU"key and an "OK"key;it allows for very convenient programmes setting,changes and resets.
2.)Specifications ●
Max70 on/off cycles per week
●
Individual and daily on/off cycles
●
Random functin
●
Count-down functin
●
With PM/AM or 24 hours setting
●
2 function buttons and 1 LCD display
●
1 reset buttons on reverse side
MENU OK
MENUBU TTO TO N OKBUTTO N
LCD
AM MoTu W eThFr SaSu PM SET RUN PROGRAM CD RND DEL
AM PM SET RUN
Hour
Min
Effecti tivedays for program mes set Powerona nat all time Curre rent O N/OFFpr programmesrunnin ing Poweroff at all time
CLOCK Sec CLOCK
PROGRAM
RANDOM CO UNTD TDO W N
3.)Day and clock setting ● Clock display ：
I II ● Day display:
24hour time display from0:00 00-23:59 59 12hour time display from12:00 00-11:59 59
→Mo→Tu→We→Th→Fr →Sa→Su→
● 12/24 hour setting:When "24" flashes on LCD,press"MENU"to select 24hr or 12hr clock display.Press "OK"to confirm.
● Day setting:When week icons flashes on LCD,press"MENU"to select current day.Press "OK"to confirm.Display will change in the sequence bellow: →Mo→Tu→We→Th→Fr →Sa→Su→
● Clock setting:When "hour time" flashes on LCD,press"MENU"to set current hour and "OK"to confirm.Press"MENU"to set current minute and "OK"to confirm.Press and
hold"MENU"to add up in an accumulated manner.Release "MENU"when desired time is set.
select"SET+CLOCK",press "OK"to confirm.When icons flashes, repeat above procedures to reset. ● Time re-setting:Press"MENU"to select"SET+CLOCK",press
4.)Programmes setting Power on/off times can be set for one specific day during the week or a block of days during the week. ● Under clock state,press"MENU" to select "SET+PROGRAM",Press "OK"to activate programming mode.
At this state,"1
"is displayed.
●
“1” represents the first programme cycle for setting power on/off time
●
“
”represents the time for power on
●
“
”represents the time for power off
● Press "MENU"to select the desired cycles for on/off setting.Press "OK"to confirm. Display will change in the sequence below: →1
→1
→2
→2
→···················→ 10
→
EMT777(E), P1/3
● When the week icons flash on LCD,press "MENU" to desired day/days for programmed on/off cycle.Press "OK"to confirm.Display change in the sequence as below: →Mo→Tu→We→Th→Fr →Sa→Su→Mo···Su→Mo···Fr →Sa Su→Mo···Sa→Su→Mo→ 1. When only one of Mo. Tu. We. Th. Fr. Sa. Su. Is display, respective programme set is effective under that specific day. 2. When all Mo. Tu. We. Th. Fr. Sa. Su.Are displayed, respective programme set is effective on all days of the week. 3. When“Mo. Tu. We. Th. Fr.” Or “Sa. Su.”Are displayed, respective programme set is effective on those respective block of days 4. When“Mo. Tu. We. Th. Fr. Sa. Su.” Or “Su”Are display, respective programme set is effective on those respective day or block of days ● When "hour time"flashes.press "MENU"to set hour and "OK"to confirm.then "minute time"flashes, press"MENU" to set minute and "OK"to confirm.Press a nd hold
"MENU"to add up in an accumulated manner. ●To reset programmes,press "MENU" to select "SET+PROGRAM"and repeat the above procedures. ●15 seconds after setting,LCD will automatically return to colck state.
5.)Count down programmes setting ●Under clock state,press "MENU" to select "SET+CD".Press "OK"twice to enter count down programmes setting state
I
Represents the preiod for power on
II
Represents the preiod for power off
● Press “MENU”to select
or
for setting.Press "OK" to confirm
● When "hour time"flashes,press "MENU"to select desire hour and press"OK"to confirm.When "minute time"flashes, press"MENU" to
select desire minute and then press "OK"to confirm.When "second time"flashes, press "MENU"to select desire second and then press "OK"to confirm Minimum period of time setting is 1 second. ● To activate count down programmes set,Press "MENU"to select“RUN+CD” and then“OK” to start count down programmes. ● To reset programmes, press“MENU" to select“SET+CD”,Press“OK”once to display original count down settings and press "OK" once more to display
or
.Repeat above procedures to change settings.
● To cancel count down function. Under clock state,press “MENU”to select “DEL+CD”.Press“OK”to confirm.
6.)Random function ●Under clock stste,press "MENU" to select "SET+RND".Press "OK"to enter random programmes settint state ●Random programmes:
Minimum on period:
10 minutes
Maximum on period:
26 minutes
Minimum off period:
26 minutes
Maximum off period:
42 minutes
● To cancel random seting Press “MENU” to select “DEL+rnd”.Press “OK” to confirm.
7.)To deactivate / activate programmes set Three states for power: 1.
-power on at all times
2
-power will switch on or off according to pre-set specific on/off times
．
3.
-power off at all times
●Under clock states, press "OK" to select →
→
→
→
/ →
●Programmes set are only effective under
/ →
.Display will change in the sequence below: →
→
state
●By stick "RESET" button with a pen on the reverse side of timer,all programmes will be reset.
8.)Battery ● 1.5 V rechargeable built in batteries are used ●Automatically turn to 1.5V DC power supply to maintain memorise and LCD display as AC power fails. ●The batteries will be fully charged after 2 hour plugged into AC outlet 230V ●To prevent the pollute,when battery expire,take it out from timer for recycle.
9.)Technical specifications Current:
230VAC 50Hz-60Hz 13(2)A
Max. Power:
3000W
IP rating:
IP20
Working temp.
0-55℃
Time setting interval:
1Min. Min.
Count-down time interval:
1Sec. Min.
Random programme on stage :
10Mins Min.~ 26Mins Max.
Random programme off stage :
26Mins Min.~ 42Mins Max.
EMT777(E), P2/3
10.) Safety Precaution 1.
2.
Risk of electric shock: - Keep away from children - Unplug timer before cleaning and program setting - Fully insert plug - Do not use in wet locations, the timer is for indoor use Risk of fire: - Do not use to control appliances that contain heating elements (cooking appliances, heaters, irons, etc.) - Do not exceed electrical rating
11.) Korrekte Entsorgung dieses Produkts
Innerhalb der EU weist dieses Sy mbol darauf hin, dass dieses Produkt nicht über den Hausmüll entsorgt werden darf. Altgeräte enthalten wertvolle recyclingfähige Materialien, die einer Wiederverwertung zugeführt werden sollten und um der Umwelt bzw. der menschlichen Gesundheit nicht durch unkontrollierte Müllbeseitigung zu schaden. Bitte entsorgen Sie Altgeräte deshalb über geeignete Sammelsysteme oder senden Sie das Gerät zur Entsorgung an die Stelle, bei der Sie es gekauft haben. Diese wird dann das Gerät der stofflichen Verwertung zuführen.
EMT777(E), P3/3
