MINERAL OIL CENTRIFUGE OSE-5-91-0374 PARTS LISTFull description
so sanh dau thuy luc goc nuoc va dau thuy luc dang tong hop
centrifugeFull description
Full description
Alat laboratoriumFull description
Centrifuge design
Full description
Descripción: decanter centrifuge application and sizing
fisdasFull description
centrifugeFull description
decanter centrifuge application and sizingDescrição completa
cara keja alat
truddddddre
pompe
ngfhhFull description
laporan centrifuge
Centrifuge merupakan alat laboraturium untuk pemisahan zat pada jaringan tubuh manusia.Full description
Deskripsi lengkap
semoa bermamfaatDeskripsi lengkap
Mineral pembentuk batuan adalah mineral-mineral yang menyusun suatu batuan dengan kata lain batuan yang terdiri dari berbagai macam mineral. Ada juga terdapat batuan yang hanya terdiri dari satu mi...
Centrifuge MachineDescription complète
89
2066-9001-200 / 0410
Failure
Possible causes
Ac ti on
The bowl does not empty completely. Solids remain in the bowl.
The operating water capacity is too low.
• Check line pressure, increase if
necessary.
Operating water data: – Pressure 2 – 3 bar (with open valve) – Volume flow min. 1 800 l/h (gauge the capacity by litres) ≅ 1.5 l in 3 secs The separating time has been set too • Shorten the separating time (see long with the result that the solids consection 3.5). tent is too high. The bowl opens during sepa- Closing water pulse is too short. • Readjust the closing water impulse ration. – Closing water evaporates. (see control unit documentation). Closing water pulse is too long. – Closing water impulse opens the bowl.