Centrifuge From Wikipedia, the free encyclopedia .
A laboratory tabletop centrifuge A centrifuge is a piece of equipment, generally driven by a motor, that puts an object in rotation around a fixed axis, axis, applying a force perpendicular to the axis. The centrifuge works using the sedimentation principle, principle, where the centripetal acceleration is used to separate substances of greater and lesser density. There are many different kinds of centrifuges, including those for very specialised purposes. It can be used for viable counts, when shaking the culture e.g. yeast yeast,, out of suspension.
Theory Protocols for centrifugation typically specify the amount of acceleration of acceleration to be applied to the sample, rather than specifying a rotational speed such as revolutions per minute. minute. The acceleration is often quoted in multiples of g g , the standard standard acceleration acceleration due to gravity at the Earth' Earth'ss surfac surface. e. This This distin distincti ction on is import important ant because because two rotors rotors with with differ different ent diam diamet eter erss runn runnin ing g at the the same same rota rotati tion onal al spee speed d will will subj subject ect samp sample less to diff differ eren entt accelerations. The acceleration can be calculated as the product of the radius and the square of the angular velocity. velocity.
History and predecessors
A 19th century hand cranked laboratory centrifuge. English military engineer Benjamin Robins (1707-1751) invented a whirling arm apparatus to determine drag. In 1864, Antonin Prandl invented the first dairy centrifuge in order to separate cream from milk. And in 1879, Gustaf de Laval demonstrated the first continuous centrifugal separator, making its commercial application feasible.
Types There are at least five types of centrifuge:
•
Tabletop/clinical/desktop centrifuge or microcentrifuge High-speed centrifuge
•
Cooling centrifuge
•
• •
Ultracentrifuge Geotechnical centrifuge
Industrial centrifuges may otherwise be classified according to the type of separation of the high density fraction from the low density one : Screen centrifuges, where the centrifugal acceleration allows the liquid to pass through a screen of some sort, through which the solids cannot go (due to granulometry larger than the screen gap or due to agglomeration). Common types are : Pusher centrifuges o
•
o
Peeler centrifuges
Decanter centrifuges, in which there is no physical separation between the solid and liquid phase, rather an accelerated settling due to centrifugal acceleration. Common types are :
•
o
Solid bowl centrifuges
o
Conical plate centrifuges
Uses Isolating suspensions Main article: Laboratory centrifuge Simple centrifuges are used in chemistry, biology, and biochemistry for isolating and separating suspensions. They vary widely in speed and capacity. They usually comprise a rotor containing two, four, six, or many more numbered wells within which the samples containing centrifuge tips may be placed.
Isotope separation Other centrifuges, the first being the Zippe-type centrifuge, separate isotopes, and these kinds of centrifuges are in use in nuclear power and nuclear weapon programs. Gas centrifuges are used in uranium enrichment. The heavier isotope of uranium (uranium-238) in the uranium hexafluoride gas tend to concentrate at the walls of the centrifuge as it spins, while the desired uranium-235 isotope is extracted and concentrated with a scoop selectively placed inside the centrifuge. It takes many thousands of centrifuges to enrich uranium enough for use in a nuclear reactor (around 3.5% enrichment), and many thousands more to enrich it to weapons-grade (around 90% enrichment) for use in nuclear weapons.
The 20 G centrifuge at the NASA Ames Research Center
Aeronautics and astronautics Main article: high-G training Human centrifuges are exceptionally large centrifuges that test the reactions and tolerance of pilots and astronauts to acceleration above those experienced in the Earth's gravity. The US Air Force at Holloman Air Force Base, NM operates a human centrifuge. The centrifuge at Holloman AFB is operated by the aerospace physiology department for the purpose of training and evaluating prospective fighter pilots for high- g flight in Air Force fighter aircraft. It is important to note that the centrifuge at Holloman AFB is unrealistic in that it is far more difficult for a pilot to tolerate the high- g environment in the centrifuge than in a real fighter aircraft. This well-known fact is based on countless accounts from experienced operational fighter pilots.[citation needed ] The use of large centrifuges to simulate a feeling of gravity has been proposed for future long-duration space missions. Exposure to this simulated gravity would prevent or reduce the bone decalcification and muscle atrophy that affect individuals exposed to long periods of freefall. An example of this can be seen in the film 2001: A Space Odyssey.
Earthquake and blast simulation The geotechnical centrifuge is used for simulating blasts and earthquake phenomena.[1] For a discussion of their design, see Geotechnical Centrifuges by Philip Turner .
Commercial applications •
•
•
•
Standalone centrifuges for drying (hand-washed) clothes - usually with a water outlet. Centrifuges are used in the attraction Mission: SPACE, located at Epcot in Walt Disney World, which propels riders using a combination of a centrifuge and a motion simulator to simulate the feeling of going into space. In soil mechanics, centrifuges utilize centrifugal acceleration to match soil stresses in a scale model to those found in reality. Large industrial centrifuges are commonly used in water and wastewater treatment to dry sludges. The resulting dry product is often termed cake, and the
water leaving a centrifuge after most of the solids have been removed is called centrate . •
•
Large industrial centrifuges are also used in the oil industry to remove solids from the drilling fluid. Disc-stack centrifuges used by some companies in Oil Sands industry to separate small amounts of water and solids from bitumen before it's sent to Upgrading.
Calculating relative centrifugal force (RCF) Relative centrifugal force is the measurement of the force applied to a sample within a centrifuge. This can be calculated from the speed (RPM) and the rotational radius (cm) using the following calculation. where g = Relative centrifuge force r = rotational radius (centimetres, cm) N = rotating speed (revolutions per minute, r/min)
References and notes 1. C. W. W. Ng, Y. H. Wang, L. M. Zhang (2006). Physical Modelling in Geotechnics: proceedings of the Sixth International Conference on Physical Modelling in Geotechnics. Taylor & Francis, p. 135. ISBN 0415415861.
