Vital Inform Information ation Managem Management ent System (VIMS) Download Special Reminders
Procedure Overview
Instructions & Explanations 1.1
€PPE
Always Use
1. Preparing VIMS download devices
i1 Makesure
o
Connect one VIMS
2.4 Make sure that the the machin machinee on hard hard & level level surfac surfacee with download cable port to Laptop the wheel chock use.
2.2
Ensur Ensuree the the engi engine ne is turn turned ed off off
2.3
Put and and make make sure sure Laptop Laptop (PC) and and downlo download ad device device to right location (save place)
2.4
Connect Connect one one VIMS VIMS downlo download ad cable cable port to Laptop Laptop (PC) (PC) and another one to machine port.
3.1 Turn Turn on on the key switch switch 3.2 Open VIMSpc VIMSpc 2003A 2003A program program on on Laptop (PC) (PC) with with double Click VIMSpc 2003A Icon
3.3 After VIMSpc VIMSpc program program appear, appear, connect connect machine machine with with Click File and Click Connect Machine
TCI-PLTSP005 Mechanical Mechanical Inspection, Service & Maintenance
o 1.2 Prepare All Download device
(PC) and another one to machine port
2
parking brake ON
4
À Target 15 min
1.2 Prepare all all VIMS Download Download devices devices as as required include Laptop with VIMS software (1) and VIMS download cable (2).
2.1
2. Set-up Equipment and tools for download process
Take VIMS VIMS Downlo Download ad data based based on service service schedule schedule Service Package or machine condition.
TCI-PLT-WI006/A0
o
Open VIMSpc 2003A, double Click VIMSpc 2003A Icon. 3.2
o 3.3 Connect machine with Click File and Click Connect Machine.
3. VIMS download data process 3.4 Check Check Machine Machine status status to find paramet parameter er that that needs needs to download, where the parameter needs to reset or don’t needs to reset. The procedure, Click Data – Real Time machine status. You will find as on screen.
o
Check Machine status, Click Data – Real Time machine status 3.4
Page 1 of 4
Vital Information Management System (VIMS) Download
TCI-PLT-WP006/A0
3.5 After you know the data status on machine status, begin to o download process with Click Data- and Download
3.5 Begin to download process with Click Data- and Download
4
TCI-HSESP005 Environmental Management Planning
3.6 After the screen appear as on side check all parameter than o 3.6 Check all parameter and needs to download and reset so you Click start for begin reset Click start for begin download process. download.
3.7 Waiting for download data process and Click OK If download process Finish (Complete)
o
3.7 Click OK If download process Finish (Complete)
4
Service Sheet on Service Package on TCI Online (Based on each type of the unit)
3.8 After Download process Finish (Complate) click file and disconnect machine for stop the download process and Exit to VIMS program.
4. Remove all device and collecting data grow into one
o
Click file disconnect machine and Exit to VIMS program. 3.8
4.1 Turn off the key switch and remove all VIMSpc Download device. 4.2 Collecting all VIMSpc raw data become one to facilitate analyst and reporting.
Page 2 of 4
Vital Information Management System (VIMS) Download Peringatan Khusus
Peninjauan Prosedur 1. Persiapkan semua perlengkapan download VIMS
€PPE
Gunakan selalu
Petunjuk dan Penjelasan
bahwa parking brake pada posisi ON.
2. Menata peralatan dam Mesin untuk peoses download
À Target 15 menit
1.1 Ambil VIMS data (Download) berdasarkan Jadwal service o atau saat mesin memerlukan download.
1.2 Persiapkan perlengkapan untuk Download.
1.2 Persiapkan semua perlengkapan download yang diperlukan seperti Laptop dan kabel download.
2.1 Pastikan mesin berada pada permukaan yang rata dank eras serta lengkapi denga pengganjal ban (wheel Chock).
i1 Pastikan
TCI-PLT-WP006/A0
2.2 Pastikan engine telah di matikan.
o
2.4 Connect satu VIMS download cable port ke laptop (PC) dan yang satunya kemesin port
2.3 Letakkan Laptop dan perlengkapannya pada tempat yang rata didalam Kabin agar ti dak jatuh. 2.4 Konek-kan satu ujung kabel download ke laptop dan ujung yang lain ke download port pada mesin.
o
Buka VIMSpc 2003A dengan doble Click VIMSpc 3.2 Buka program VIMSpc pada laptop dengan menekan icon 2003A Icon. 3.1 Putar kunci kontak pada posisi ON
3.2
VIMSpc 2003A
3.3 Connect VIMSpc software dengan mesin dengan menekan o 3.3 Click File dan Click data-connect machine. Connect Machine.
4
TCI-PLTSP005 Mechanical Inspection, Service & Maintenance
3. Proses pengambilan data VIMS
o 3.4 Cek Mesin status, Click 3.4 Setelah software tersambung dengan mesin check mesin status untuk melihat data apa saja yang harus di download Data – Real Time machine dan mana yang memerlukan untuk di reset). status
Talsico™ Process Picture Maps are created under license from Talsico International Pty Ltd. Talsico™ Process Picture Maps and all associated intellectual property are owned by Talsico. Duplication or use of this methodology or format is prohibited without the express written permission of Talsico. Contact:
[email protected]
Author: fitriyani
Effective: 31 Dec 04
Superseded:
Approvals: Stewart MacMillan
G:\Transaction Files\For Fitriyani\Vital Information Management System(VIMS) Download.doc Revised: 29-Dec-2004
Page 3 of 4
Vital Information Management System (VIMS) Download 3.5 Setelah mengetahui data mana yang perlu di download mulai proses download dengan menekan data-download.
4
TCI-HSESP005 Environmental Management Planning
3.6 Berikan tanda centang pada parameter yang hendak didownload dan yang hendak anda reset kemudian tekan start.
TCI-PLT-WP006/A0
o
3.5 Mulai Download proses dengan Click Data- and Download
o
Cek semua parameter dan reset Click start start untuk 3.6
mulai download.
3.7 Tunggu sampai semua proses download lengkap kemudian o 3.7 Click OK Jika proses download selesai. tekan OK jika sudah selesai.
4
Lembar Servis pada Paket Servis di TCI Online (Berdasarkan tipe dari tiap unit) 3.8 Jika proses download telah selesai tekan File – disconnect o – dan Exit untuk keluar dari program VIMSpc 2003A
Click file disconnect mesin dan Exit to VIMS program.
4. Pelepasan semua peralatan dan mengumpulk an data men adi satu
3.8
4.1 Matikan kunci kontak dan lepas semua perlengkapan download susun secara rapi. 4.2 Kumpulkan semua data mentah dan gabungkan menjadi satu untuk mempermudah proses analisa dan pembuatan report.
Talsico™ Process Picture Maps are created under license from Talsico International Pty Ltd. Talsico™ Process Picture Maps and all associated intellectual property are owned by Talsico. Duplication or use of this methodology or format is prohibited without the express written permission of Talsico. Contact:
[email protected]
Author: fitriyani
Effective: 31 Dec 04
Superseded:
Approvals: Stewart MacMillan
G:\Transaction Files\For Fitriyani\Vital Information Management System(VIMS) Download.doc Revised: 29-Dec-2004
Page 4 of 4
