**example of node name – 3RJ01(RNC), GNJ123(NODEB) BASIC COMMAND - Node B From unix terminal terminal>cd moshell terminal>./moshell nodename Fisrt command when connected to node node>lt all node>al - to list an alarm node>lget 0 - to get type of RBS node>lget radio - to get how many radio link was connected node>pget e1 - to get summary of e1 error counted node>pdiff e1 - to get e1 error in 25 sec period node>st e1 – to get status of E1 node>lget ret ele – to get current e-tilting for antenna node>lget . hsdpaca - to check hsdpa capability node>bp all - to list all board at node example GNJ021> bp all 081222-10:05:01 10.230.75.237 7.0t RBS_NODE_MODEL_J_5_17 stopfile=/tmp/18353 Checking available boards on node... Trying password from ipdatabase file: /home/sa415750/moshell/./sitefiles/ipdatabase... . Logging to file: /home/sa415750/moshell_logfiles/logs_moshell/tempfiles/20081222-095526_18328/boLog18328 ............................................................................................................... ................................. Log close: /home/sa415750/moshell_logfiles/logs_moshell/tempfiles/20081222-095526_18328/boLog18328 Created following board-groups: all, allp, mp, bp, tu, coremp, ommp, scx, xp, rax, tx, tx6, ru, ru[0-6], asc, asc[0-6]. >>> Type "bp" to view available board-groups and "bp " to view group contents. ================================================ Board BoardType Swallocation ================================================ 000100 CBU1 Main_CBU 000800 RAX13 RBS_RAXB 000900 RAX13 RBS_RAXB 001000 TX6HS-04 RBS_TXB 001100 TX6HS-04 RBS_TXB 001200 RUIF RBS_RUIFB 001200/port_0_dev_5 RU 001200/port_4_dev_6 RU 001200/port_8_dev_7 RU
node>lhsh 001000 te log read |grep error - to check if any error at TXB 1 node>lhsh 001100 te log read |grep error - to check if any error at TXB 2
node>lga -s 20081222.0000 -e 20081212.0200 - to check alarm log from 22/12/2008(0000) till 22/12/2008(0200) node>pmr – latest pmr for one hour node>pmr –s 20081222.0000 –e 20081222.2000 – to get PMR from 22/12/2008(0000) till 22/12/2008(0200)
______________________________________ BASIC COMMAND - RNC From unix terminal terminal>cd moshell terminal>./moshell nodename Fisrt command when connected to node node>lt all node>al - to list current alarm in RNC node>st nodename - to get status of node node>lst nodename - to list all object related to the node. node>lget nodename cid - to get cellId number node>lget nodename locationar - to get LAC node>lget nodename routing - to get routing area node>lget nodename sf - get get spreading factor setting node>lget nodename scram - to get scrambling code number node>lget nodename utranrela - to get utran relations node>lget nodename gsmrela - to get gsm relations node>lget nodename uarfcn - to get frequency number node>lget nodename primarycp - to get current power setting node>lget nodename usedfreq - to get 2d setting (GSM) node>pmr – latest pmr for one hour node>pmr –s 20081222.0000 –e 20081222.2000 – to get PMR from 22/12/2008(0000) till 22/12/2008(0200)
______________________________________ 2nd Carrier SITES acceptance (Parameters check) RNC Level node>lget nodename cellres – to get cell reserved parameter (2nd carrier should be 0 @ reserved node>lget nodename sinter - to check Decision on when measurements on Interfrequency neighbors are performed node>lget nodename qrxlev – 2nd carrier value should be -97 and for 1st carrier is -115 node>lget nodename qoffset - to check an offset between NBRs relations node>lst nodename – make sure Hsdsch=1 for all first carrier(sector A,B and C) is locked node>lget nodename cover – to make sure coverage relations was assigned (only from f1 to f2) node>lget nodename hspath – to make sure hspathlossthreshold is set to 170 (only from f1 to f2) Node B node>lget . hsdpaca – make sure value for 1st carrier(S1C1, S2C1, S3C1) is 0 and for 2nd carrier (S1C2, S2C2, S3C2) is 1 node>lget . maxhs – make sure the maxhsrate is set to 160 node>lget . dyna – make sure dynamicHsPdschCodeAdditionOn is true but must make sure the license for that particular site available. Completed list of license configuration on RBS can be get from GTAC. We can check also using below command (per RBS). node>inv – to check loaded license. Below some sample of result. =============================================================================================================== == FeatureId StartDate StopDate Status ChangeReason Description =============================================================================================================== == CXC4020001 2008-11-13 9999-12-31 Enabled Licensed SOFTWARE KEY/DYNHSPDSCHCODEALLOCATION CXC4020002 2008-11-13 9999-12-31 Enabled Licensed SOFTWARE KEY/HSDPA16QAM CXC4020003 Disabled Licensed HSDPA Flexible Scheduler CXC4020005 2008-11-13 9999-12-31 Enabled Licensed LOAD MODULE/ENHANCEDUPLINK CXC4020006 Disabled Licensed Extended range up to 80 km CXC4020007 Disabled Licensed Extended range up to 200 km CXC4030024 2008-10-15 9999-12-31 LOAD MODULE/BASIC POSITIONING SERVICES, CXC4030567 2007-04-26 9999-12-31 LOAD MODULE/INTERACT. PS (16/16) + SRB ( CXC4030568 2007-04-26 9999-12-31 LOAD MODULE/INTERACT. PS (16/64) + SRB ( CXC4030569 2007-04-26 9999-12-31 LOAD MODULE/INTERACT. PS (64/16) + SRB ( NOLKFCHECK Disabled Licensed
node>lget . maxnum – make sure maxNumHsPdschCodes equal to 10 and maxNumHsdpaUsers equal to 16 for 2nd carrier
