Qa_qc Welding Inspector - Shaikh Mohammed Tabish

Al-Suwaiket Support Services P.O.Box.4228 Al-Khobar 31952 KSA Tel.: 03 814 6222 Fax: 03 858 0916 Email [email protected]

RESUME SHAIKH MOHAMMED TABISH QA/QC WELDING INSPECTOR (ARAMCO APPROVED) SAP #: 70015286 EDUCATIONAL QUALIFICATION:  Mechanical Engineering (Diploma) TECHNICAL CERTIFICATION:  CSWIP 3.1 (TWI-UK) – Certified Welding Inspector – Cert. No.: 43650  ASNT Level – II in RT, UT, MPT & LPT SAFETY TRAINING:  Health safety and environmental training at Tarapur NPCL (India)  Use of radiation monitor equipment's and dose reading at NPCL (India)  HSE induction training as per PDO requirement (Oman)  HSE H2S awareness and escape (Oman)  HSE-IFR Initial fire response (Oman)  HSE-HTS E HSE tools and Skills (Oman)  HSE-CMC E coaching, monitoring and competence assessment (Oman)  HSE SLS SE safety leadership for supervisor (Oman)  BASIC LIFE SUPPORT (Oman) PROFESSIONAL EXPERIENCE: Employer Project Location Position Duration

: : : : :

Sinopec Service Saudi Arabia Company Wasea Bulk Plant Project Wasea, Saudi Arabia QA/QC Welding Inspector (Aramco Approved) 5th Aug. 2012 to till date

Employer Project Location Position

: : : :

Makamin Petroleum Services Company Insulation of Water Injection Centrifugal Pump Abqaiq, Saudi Arabia QA/QC Welding Inspector (Aramco Approved)

Shaikh Mohammed Tabish – QA/QC Welding Inspector Page 1 of 7


Duration Employer Project Position Duration

: : : : :

8th July 2012 to 28th July 2012 Contracting & Trading Co. (C.A.T.) Saudi Arabia UBTG-1 Pipeline Replacement Project QC Welding Inspector (Aramco Approved) June 2011 up to May 2012

Job Responsibilities:  Conduct weekly Tool Box meetings with welders and pipe – fitters in order to ensure that they fully understand project requirements.  Control Base Materials, Pipe and Plates.  Implementation and Monitoring of work and processes being carried out to the  Technical Drawings / Specifications / Procedures and Instructions established within the Production Department  Inspect and verify the dimensional accuracy and finished condition of fabricated pipes prior to shipping from spool-yard to Job site.  Monitor installation of pipes to the pipe rack.  According to piping arrangement, monitor the piping installation fit – up per isometric drawing approved plan by the client conduct daily inspection and monitoring activities.  Conduct weekly meetings with welders and pipe – fitters in order to ensure that they fully understand project requirements  Plan training session, Delivery Competency based training, maintain training facilities developed review and analyze curriculum  Control Base Materials, Pipe and Plates.  Ensure correct storage, Handling and Conditioning of Filler Materials.  Ensure correct storage, Handling and Conditioning of Filler Materials.  Making the reports on Non-Destructive Testing Results, repairs and Defects.  Line checking and preparation of the packages for testing of piping systems.  Witness and control of Welding Procedure Tests, Welder Testing, Fabrication inspection, Control of site welding and mechanical activities at site.  Inspection of final weld quality for Visual Defects, weld face and root appearance, reporting the welded joints in site. Employer : Atharaa Engineering Services LLC, Oman Position : QC Welding / NDT Inspector Shaikh Mohammed Tabish – QA/QC Welding Inspector Page 2 of 7


Duration

: Aug. 2010 to April 2011

Job Responsibilities:  Conduct all stage-wise Inspection as per approved QCP/ITP with Client, Owner & Third Party.  Review of WPS, PQR as per client specification and conduct welder qualification tests, witness mechanical testing and Radiography for Qualification and approval of welder from Third Party inspector/ Client.  Witness welder qualification test for various positions and different thick 

material for Plate and pipe diameters for Stainless Steel, Carbon Steel, Aluminum, as per WPS and process Issue of welder Qualification Test reports and identity card.

 Stage inspection of repair activities during fit up and welding and ensure the compliance with required standards. Evaluation of the welding joints by visual and NDT/Quality Control activities related to shut down and maintenance of  Refinery at various occasions.  Preparation of punch list items and clearance to the next fabrication steps.  Preparation of dossier records and submitting for approval to the higher authorities. Maintaining of all inspection reports and related documents in QA/QC dept.  Monitoring & Review of Preheat/Post heat & PWHT of welds.  Monitor the storage, backing and handling of welding consumable. In accordance with manufacturer approved procedure.  Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS D1.1, API 1104.  Familiar with material ground inspection, dimensional check & documentation  Prepare inspection reports, NCR, technical queries, weekly QA/QC reports and monthly X-Ray and repairing status.  To ensure all fabrication works are in according to approved drawing & Latest revision.  Identification as per procedures and clearance for Radiography.  To ensure all fabrication works comply with relevant project specification & Classification requirements.  Liaise and co-ordinate with classification surveyor & owner’s representative to carry out inspection.  Review and submission of Final Document for Approval Shaikh Mohammed Tabish – QA/QC Welding Inspector Page 3 of 7


 Carried out of Fit-up and Visual Inspection for Various Structures such as Sub assembly Erections  Dimension of the Structure whether it’s according to the Drawings.  Preparation of weld map, weekly and monthly welding summary (Welder Ability Status, NDT Traceability reports, Production Reports).  Reviewing of Mill Test Certificates, Radiography films, PWHT charts and other NDE reports.  Executed the entire setup process for Non-Destructive Testing.  Coordinated of the Ministry of Environment in sultanate of Oman to attain the  Radiography licence for Atharaa.  Coordinated with the Ministry of Civil defence to get the approval for transportation required for Radiography isotopes.  Attained quotation from various agencies from sultanate of Oman, United Arab Emirates, and India for Non-Destructive Testing (NDT) equipment.  Collate and offered feedback on the market and competitors to the Executive Director.  Elaborated a complete and detailed Business Plan including a market survey showing market potential, an analysis of competitors, a definition of market needs, the recommended distribution model, the resources required and a forecasted profit and loss.  Employed creative thinking to customize a ‘Non-Destructive Testing’ plan tailored to Atharaa Engineering Services criteria to maximize visibility and exposure.  Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS D1.1, API 1104. Employer : Das Offshore Engg. Pvt. Ltd Mumbai Position : QA/QC Engineer (Welding/NDT) Duration : Aug. 2008 to July 2010 Job Responsibilities:  Conduct all stage-wise Inspection as per approved QCP/ITP with Client, Owner & Third Party.  Preparation of Weld Plans & Test Plans as per Drawings & Specs., of related clients & International codes.  Inspection of welds for Pressure vessels, Heat Exchanger, Columns as per appropriate standards and client specification. Shaikh Mohammed Tabish – QA/QC Welding Inspector Page 4 of 7


 Co-ordination with client / Third party inspectors for Inspection activities.  Issue of inspection release note.  Monitoring of welding activities, heat treatment, welding consumables.  Final Inspection and releasing Spools for Painting of Pre-fabricated Piping Systems.  Monitoring of quality control & NDT activities during fabrication.  Interpretation of weld Radiographs & other NDT's test performance like Dye. Pen., Magnetic, Particle, Ultrasonic Testing  Review of WPS, PQR as per client specification and conduct welder qualification tests, witness mechanical testing and Radiography for Qualification and approval of welder from Third Party inspector/ Client.  Witness welder qualification test for various positions and different thick material for Plate and pipe diameters for Stainless Steel, Carbon Steel, Aluminum, as per WPS and process Issue of welder Qualification Test reports and identity card.  Stage inspection of repair activities during fit up and welding and ensure the compliance with required standards. Evaluation of the welding joints by visual and NDT/Quality Control activities related to shut down and maintenance of Refinery at various occasions.  Monitoring & Review of Preheat/Post heat & PWHT of welds.  Monitor the storage, backing and handling of welding consumable. In accordance with manufacturer approved procedure.  Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS D1.1, API 1104.  Reviewing of Mill Test Certificates, Radiography films, PWHT charts and other NDE reports. Employer : Industrial Inspection Services (IIS) Mumbai Position : Welding Supervisor/NDT inspector Duration : June 2006 to Aug. 2008 Job Responsibilities:  Worked as a NDT Inspector and Welding Inspector at Tarapur NPCIL (Nuclear Power Plant Corporation of India). Shutdown Project from November 2008 to January 2009  Worked on a Naval Ship at Mazegaon Dock Pvt. Ltd. (MDL) Project under supervision of a French company DCNS, (Onshore) Welding and NDE Inspections on outer frames (Weld Inspection); Shaikh Mohammed Tabish – QA/QC Welding Inspector Page 5 of 7


 DCNS is a major player on the European and world markets for value-adding Naval Defense System.  Review of Welding Procedure Specification and Procedure Qualification records and follow Inspection test plan and QAP.  Fit-up checking, Review of weld parameters of SMAW, GTAW, SAW, GMAW according to WPS. Monitoring & Review of Preheat/Post heat & PWHT of welds.  Monitor the storage, backing and handling of welding consumable. In accordance with manufacturer approved procedure. 

Worked on bullets and pressure vessels at BPCL (Bharat Petroleum Corp. Ltd.) Mumbai have done Welding Inspection and witness UT.

 Worked for MRPL (Mangalore Refineries & Petrochemical Project, Mangalore)  Performed welding and NDE inspection and TG on storage tanks.  UT on Structural Joints (Weld Inspection)  Job for Amritsar Airport Project, under Pratibha Pipes and Structural Ltd.  Worked as Welding supervisor on Top and Bottom Dishends of Boilers Job for Larsen & Toubro.  Worked as welding supervisor on Leg Support of Boilers Job for Larsen & Toubro. 

Worked on bullets and pressure vessels at BPCL (Bharat Petroleum Corp. Ltd.) Mumbai

 Performed UT and have done Welding Inspection.  Worked for Vikram Ispat (Saurashtra). Performed NDE inspection works on  pressure valves  Visits various local sites in Mumbai & Thane for Welding, NDE & Mechanical inspection works  Interpretation of Radiographs of Weld ments against various codes, standards. ADDITIONAL INFORMATION:  Proficiency in Microsoft Office  Operating Systems: Windows 98 / 2000 / XP  Certification in PRO-E PERSONAL DETAILS: Nationality

:

Indian



Date of Birth :

2nd January 1987

(SHAIKH MOHAMMED TABISH)


Qa_qc Welding Inspector - Shaikh Mohammed Tabish

Recommend Documents