Household industrial & Institutional Cleaning Formulation Guide
ispcleaning.com
In the fast-paced world of household, industrial and institutional cleaning products, your customers are constantly expecting something better. • More effective performance • Unique delivery systems • Lower cost-in-use At ISP, we have created a broad portfolio of specialty ingredients that address a wide range of formulating challenges and can help you capitalize on trends in the market.
Contents
Pages
Household cleaning formulations
6 - 26
Hand soap formulations
26 - 27
Laundry formulations
28 - 34
Dishwashing formulations
34 - 41
Industrial & Institutional cleaning formulations
41 - 47
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
2
Formulations Index Household cleaning formulations Application Hard surface cleaners
Kitchen
Bathroom
Wood
Glass
Reference number 11022-64-1
Stainless steel Carpet/floor
Misc.
Page
Hard surface cleaner featuring Surfadone® LP-100 & LP-300
6
11364-58-A8
Hard surface cleaner with ISP MicroBeads™ 20279
6
11364-136-16
Hard surface cleaner with Setleze™ 3000
7
11539-68-25
Hard surface cleaner with Triclosan ISP MicroCapsules™ 4448
8
11539-73-27
Hard surface cleaner with Tea Tree Oil ISP MicroCapsules™ 4371
9
11040-104-1
Multipurpose alkaline degreaser
9
11678-41-2
Concentrated all-purpose cleaner
10
11678-76-6
Plastic surface cleaner
10
11040-89-1
Kitchen cleaning wipes
11
11040-105-1
Kitchen disinfectant cleaner
11
11539-59-33
Kitchen gel cleaner
12
11678-13-22
Kitchen cream cleaner
12
11040-93-1
Bathroom cleaner (formula #1)
13
11539-26-32
Bathroom gel cleaner
13
11678-7-33
Bathroom cream cleaner
14
11678-152-33
Institutional bathroom cleaner featuring Easy-Wet™ 20 and NEP®
14
11678-69-19
Opaque toilet bowl cleaner, chlorine based
15
11678-71-60
Acidic toilet bowl cleaner featuring Sorez™ HS-205
15
11363-152-43
Wooden surface cleaner
16
11364-62-B13
Wooden surface cleaner with ISP MicroBeads™ 20277
17
11539-66-25
Wooden surface polish and cleaner
17
11040-92-1
Glass cleaning wipes
18
Anti-misting glass cleaner
18
11678-40-10
Anti-static screen cleaner featuring Ceraphyl® 60 and 65
19
11364-18-8
Ceramic tile cleaner
19
11539-125-185 Ceramic
Title
11364-72-F4
Ceramic tile cleaner with ISP MicroBeads™ 20277
20
11364-145-10
Stainless steel cleaner
20
11539-118-25
Stainless steel gel cleaner
21
11040-77-1
Carpet cleaner
21
11040-81-1
Machine carpet cleaner
22
11678-29-11
Carpet spot cleaner
22
11040-76-2
Floor polish
23
11539-63-14
Abrasive cleaner
24
11678-16-36
Power cream all-purpose cleaner
24
11678-144-8
Institutional all-purpose cleaner featuring Jaypol® S44
25
11678-149-18
Institutional grill cleaner featuring Jaypol® M30
25
Air freshener (formula #1)
26
11040-80-1
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
3
Hand soap formulations Application
Reference number
Hand soap
11040-61-1
Liquid hand soap
Title
Page 26
11539-130-9
Paper soap
27
11364-61-C6
Hand gel cleaner with ISP MicroBeads™ 20279
27
Laundry formulations Application Detergent
Softener
Reference number
Page
Liquid laundry detergent (clear & non-builder)
28
11678-129-2
Concentrated liquid laundry detergent featuring surfadone® lp-100
29
11364-31-9
Color safe liquid laundry detergent
30
11364-72-E4
Laundry liquid with ISP MicroBeads™ 20278 (formula #2)
31
11678-115-1
Fabric softener featuring Jaypol® 213
32
Fabric softener, 3 formulations
32
Laundry pre-spotter
33
11040-69 Pre-treatment
Title
11040-64-1
11363-25-39
Stain remover featuring Sorez™ 100
33
Protection
ISPM-18.06.2010-1 11126-67-1
Protective spray
34
Packaging
11178-142-1
Water soluble film
34
11178-142-2
Water soluble film with delayed solubility
34
11178-142-3
Water soluble flexible film
35
Dishwashing formulations Application Detergent
Reference number
Page
11040-96-1
Washing up liquid featuring Surfadone® LP-300 (formula #1)
35
11040-97-1
Washing up liquid featuring Surfadone® LP-300 (formula #2)
36
11040-98-1
Ecological washing up liquid
36
Washing up liquid with ISP MicroBeads™ 20278 (formula #1)
37
11364-79-10
Washing up liquid featuring Surfadone® LP-100
38
11539-72-22
Washing up liquid with ISP MicroCapsules™ 4449
39
11678-132-2
Non-phosphate automatic dishwashing detergent powder featuring Jaypol® hs61
39
11678-132-3
High phosphate automatic dishwashing detergent powder featuring Jaypol® 2019
40
11678-142-51
Non-phosphate automatic dishwashing detergent gel featuring Jaypol® hs61
40
11040-100-1
Dishwasher detergent tablets
41
11364-71-D13
Tablets
Title
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
4
Industrial & Institutional cleaner formulations Application Car
Reference number
Title
Page
11678-10-26
Car shampoo
41
11678-10-17
Car wash & wax
42
11678-9-12
Tire wax
42
11539-152-7
Wheel spray cleaner
43
Metal
11040-74-1
Metal cleaner
43
Hard surface
11678-119-5
Dairy and brewery cleaner featuring Jaypol® M30
44
Laundry
11678-144-8
Institutional all-purpose cleaner featuring Jaypol® s44
44
11678-149-18
Institutional grill cleaner featuring Jaypol® m30
45
11678-152-33
Institutional bathroom cleaner featuring easy-wet™ 20 and nep®
45
11679-11-14
Institutional laundry alkali/builder booster featuring Jaypol® m30
46
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
5
Formulations Hard surface cleaner featuring Surfadone® LP-100 & LP-300 11022-64-1
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
60.480
Supplier
Sodium lauryl sulphate (dodecyl sulphate, sodium salt 70%)
20.000
Sigma Aldrich
Coconut diethanolamide (Caflon Cd)
10.000
Ellis & Everard
Ethylene glycol monobutyl ether
5.000
Aldrich
Surfadone® LP-300
1.500
ISP
Surfadone® LP-100
1.500
ISP
Tetrasodium EDTA (Nervanaid BA4)
1.000
Aston Chemicals
Nuosept® 44/Integra® 44
0.500
ISP
Dye
0.010
Perfume/Fragrance
0.010 Total
100.000
Formulation instructions 1. Mix all ingredients until uniform.
Hard surface cleaner with ISP MicroBeads™ 20279 11364-58-A8 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
93.850
Supplier
Jaypol® TTA
2.000
ISP
C9-11 Alcohol/8EO (Synperonic 91/8)
2.900
Uniqema
Easy-Wet™ 20
0.600
ISP
Nuosept® 44/Integra® 44
0.160
ISP
Dye (1% solution)
0.200
Polysorbate 80
0.017
Perfume/Fragrance
0.008
Sodium hydroxide (NaOH 50% aq. solution)
0.160
Fisher
ISP MicroBeads™ 20279
0.100
ISP
Total
A & E Connock Ltd.
100.000
Formulation instructions 1. Add Jaypol® TTA to water while mixing and neutralize with sodium hydroxide solution (50%). 2. Add Synperonic 91/8, Easy-Wet™ 20 and dye solution (1%). 3. Premix Polysorbate 80 and Fragrance then add into formulation. 4. Add Nuosept® 44/Integra® 44 and ISP MicroBeads™ 20279 with slow, gentle mixing.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
6
Hard surface cleaner with Setleze™ 3000 11364-136-16 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
94.865
Sodium laureth sulphate (70%) (Texapon N70)
1.000
Cognis
C9-11 Alcohol/8EO (Synperonic 91/8)
1.000
Uniqema
Cocoamide diethanol amide (Purton CFD)
0.500
Zschimmer & Schwarz
C12-C18 Alcohol/7EO (Dehydol LT 7)
0.500
Cognis
Nuosept® 44/Integra® 44
0.400
ISP
Sodium tripolyphosphate
0.400
Fisher
Soda ash
0.400
Fisher
Hydroxyethylcellulose (Cellosize QP 30000H)
0.385
Dow
Surfadone® LP-100
0.300
ISP
Setleze™ 3000
0.200
ISP
Polysorbate 80
0.020
A & E Connock Ltd.
Dye (1% solution)
0.020
Perfume/Fragrance
0.010 Total
Supplier
100.000
Formulation instructions 1. Add Cellosize HEC QP 30000H into water and mix very well until it dissolves. 2. Add Soda ash and Sodium tripolyphosphate. 3. Add Synperonic 91/8, Texapon N70, Dehydol LT 7, Purton CFD, Surfadone® LP-100 and dye solution (1%). 4. Add the Fragrance in the Polysorbate 80 and add to the mixture. 5. Add Setleze™ 3000 and Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
7
Hard surface cleaner with Triclosan ISP MicroCapsules™ 4448 11539-68-25 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
90.255
Supplier
Xanthan gum (Keltrol T)
0.650
Sodium lauryl ether sulphate 70% (Texapon N70)
5.000
Cognis
Sodium lauryl sarcosinate (Protelan LS9011)
2.250
Zschimmer & Schwarz
Sodium chloride (NaCl solid)
0.800
Fisher
Surfadone® LP-100
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
ISP MicroCapsules™ 4448
0.100
ISP
Dye (0.5% solution)
0.020
Polysorbate 80
0.017
Perfume/Fragrance
CP Kelco
A & E Connock Ltd.
0.008 Total
100.000
Formulation instructions 1. Add the Keltrol T to the water and mix until it dissolves. 2. Add Protelan LS9011, Texapon N70, Surfadone® LP-100, NaCl and dye solution (0.5%) in this order. 3. Premix Fragrance with Polysorbate 80. 4. Add Fragrance mix and Nuosept® 44/Integra® 44. 5. Add the ISP MicroCapsules™ 4448 and mix gently.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
8
Hard surface cleaner with Tea Tree Oil ISP MicroCapsules™ 4371 11539-73-27 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
76.655
Stabileze® QM (2% aq. solution)
18.000
Supplier ISP
Sodium hydroxide (NaOH 50% solution)
0.260
Fisher
Sodium lauryl ether sulphate (70%) (Texapon N70)
2.500
Cognis
Surfadone® LP-100
0.560
ISP
Ceraphyl® 60
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
ISP MicroCapsules™ 4371
1.000
ISP
Dye (0.5% solution)
0.100
Polysorbate 80
0.017
Perfume/Fragrance
0.008 Total
A & E Connock Ltd.
100.000
Formulation instructions 1. Prepare 2% gel by adding Stabileze® QM to water and heating to 80°C until it dissolves and forms gel. 2. Add 18g from gel Stabileze® QM and neutralize with NaOH 50%. 3. Add Texapon N70, Surfadone® LP-100, Ceraphyl® 60 and dye solution (0.5%) in this order. 4. Dissolve the Fragrance in the Polysorbate 80 and add to the mixture. 5. Add Nuosept® 44/Integra® 44. 6. Add the ISP MicroCapsules™ 4371 and mix sensitively.
Multipurpose alkaline degreaser 11040-104-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
85.330
Tetrapotassium pyrophosphate (28%)
5.000
Albright and Wilson
Sodium xylene sulphonate (Eltesol SX Pellets)
4.500
Fisher
NEP® solvent
2.000
ISP
LABSA (linear alkyl benzene sulphonic acid)
1.500
Cognis
Surfadone® LP-300
1.000
ISP
Sodium hydroxide 50%
0.500
Fisher
Nuosept® 44/Integra® 44
0.150
ISP
Perfume/Fragrance
0.010
Dye
0.010 Total
Supplier
100.000
Formulation instructions 1. Charge water into the vessel. 4. Add Surfadone® LP-300, stir until all dissolved. 2. Add caustic soda, followed by LABSA, stir until all neutralized. 3. Add tetrapotassium pyrophosphate, Eltesol SX Pellets and stir until dissolved. 5. Add the remaining ingredients and stir well until homogeneous.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
9
Concentrated all-purpose cleaner 11678-41-2 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
70.220
Lauryl dimethyl amine oxide (Amphotenside DMOX)
5.000
Sodium lauryl ether sulphate 70% (Texapon N70)
13.000
Cognis
Sodium lauryl sarcosinate (Protelan LS9011 )
8.000
Zschimmer & Schwarz
Surfadone® LP-100
1.200
ISP
Sodium chloride (NaCl solid)
1.000
Local supplier
Nuosept® 44/Integra® 44
1.000
ISP
Perfume/Fragrance
0.100
Polysorbate 80
0.480 Total
Supplier Zschimmer & Schwarz
A & E Connock Ltd.
100.000
Formulation instructions 1. Add ingredients respectively into the water. While adding, make sure each one dissolves completely. 2. Adjust pH with citric acid around 7.00. 3. Premix Fragrance with Polysorbate 80. 4. Add Fragrance mixture and Nuosept® 44/Integra® 44 to the formulation.
Plastic surface cleaner 11678- 76-6 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
94.810
Supplier
C9-11 Alcohol/8EO (Synperonic 91/8)
3.500
Uniqema
NEP® solvent
1.000
ISP
Perfume/Fragrance
0.030
Polysorbate 80
0.060
A & E Connock Ltd.
Surfadone® LP-100
0.200
ISP
0.400
ISP
Nuosept® 44/Integra® 44 Total
100.000
Formulation instructions 1. Add ingredients in order shown. While adding, make sure each one dissolves completely. 2. Mix Fragrance with Polysorbate 80. 3. Add Fragrance mix and then add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
10
Kitchen cleaning wipes 11040-89-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
91.650
NEP® solvent
2.000
ISP
Isopropyl alcohol (Isopropanol)
2.000
Fisher Scientific
Sodium cocoyl glutamate (Amisoft CS-11)
1.500
Ajinomoto
Surfadone® LP-100
1.500
ISP
Sodium hydroxide (10% Aqueous)
1.180
Fisher Scientific
Nuosept® 44/Integra® 44
0.150
ISP
Perfume/Fragrance
0.020 Total
Supplier
100.000
Formulation instructions 1. Add the ingredients in the order listed, stirring thoroughly after each addition. 2. Apply to wipe substrate in a 1:1 weight ratio.
Kitchen disinfectant cleaner 11040-105-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
93.280
Tetrapotassium pyrophosphate (28%)
3.000
Albright and Wilson
Benzalkonium chloride (80%) (Empigen BAC 80)
2.000
Huntsman
Surfadone® LP-100
1.500
ISP
EDTA 38% (EDTA )
0.200
Fisher
Perfume/Fragrance
0.010
Dye
Supplier
0.010 Total
100.000
Formulation instructions 1. Charge water into the vessel. 2. Add tetrapotassium pyrophosphate and EDTA, stir until all dissolved. 3. Add Empigen BAC 80, stir until homogeneous. 4. Add Surfadone® LP-100, stir until dissolved. 5. Add dye and Fragrance.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
11
Kitchen gel cleaner 11539-59-33 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
69.390
Supplier
Jaypol® AT4
3.000
ISP
Sodium hydroxide (NaCl 50% aq. solution)
2.400
Fisher
Sodium hypochlorite (14% NaOCl active chlorine)
17.500
Fisher
Sodium xylene sulfonate 40% (Stepanate SXS 40)
5.000
Stepan
NEP® solvent
1.000
ISP
Polysorbate 20
0.760
A & E Connock Ltd.
Dye
0.150
Perfume/Fragrance
0.100 Total
100.000
Formulation instructions 1. Add Jaypol® AT4 into the water and neutralize with NaOH (50%). 2. Mix until a clear solution is obtained. 3. Add Sodium hypochlorite, Stepanate SXS 40, NEP® and dye solution (1%). 4. Premix Polysorbate 20 and Fragrance then add into formulation. Adjust to desired pH with the NaOH.
Kitchen cream cleaner 11678-13-22 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
93.721
NEP® solvent
2.000
ISP
Cocoglycoside (Plantacare 818)
1.330
Cognis
Sodium lauryl sarcosinate (Protelan LS 9011)
1.300
Zschimmer & Schwarz
Polectron® 430/Antara® 430
0.830
ISP
Surfadone® LP-100
0.400
ISP
Nuosept® 44/Integra® 44
0.200
ISP
Sodium hydroxide (NaOH 50% aq. solution)
0.150
Fisher
Polysorbate 80
0.046
A & E Connock Ltd.
Perfume/Fragrance
0.023 Total
Supplier
100.000
Formulation instructions 1. Add NEP®, Surfadone® LP-100, Protelan LS 9011, Plantacare 818, Polectron® 430/Antara® 430 and NaOH into water. 2. Premix Polysorbate 80 and Fragrance then add into formulation. 3. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
12
Bathroom cleaner (formula #1) 11040-93-1 Formulation Ingredients
% W/W
A.
Aqua/water (D.I. water)
89.580
Glycolic acid 65%
3.000
Aldrich
Lauryl dimethyl amine oxide (30%)
2.000
Zschimmer & Schwarz
Acetic acid (Glacial)
1.500
Fisher Scientific
Alkyl dimethyl benzyl ammonium chloride (50%) (Empigen BAC 50)
1.400
Huntsman ISP
B. Surfadone® LP-100
2.500
Perfume
0.010
Dye
Supplier
0.010 Total
100.000
Formulation instructions 1. Charge the mixing vessel with the water and commence stirring. 2. Add the remaining ingredients while stirring in the order given above.
Bathroom gel cleaner 11539-26-32 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
81.340
Supplier
C12-C14/30 EO sodium sulfate (Disponil FES 77)
7.000
NEP® solvent
4.000
ISP
Citric acid (granular)
4.000
Fisher
C 9-11 alcohol/8EO (Synperonic 91/8)
1.000
Uniqema
Easy-Wet™ 20
1.000
ISP
Lactic acid (Purac 88)
0.580
Purac
Jaypol® N-100
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Cognis
Dye (1% aqueous solution)
0.180
As required
Polysorbate 80
0.067
A & E Connock Ltd.
0.033
As required
Perfume/Fragrance Total
100.000
Formulation instructions 1. Dissolve the Jaypol® N-100 in the water. 2. Add the citric acid and lactic acid to the mixture. 3. Add the Disponil FES 77, NEP®, Easy-Wet™ 20 and dye solution respectively, mixing well between each addition. 4. Dissolve the Perfume/Fragrance in the Polysorbate 80 and add to the mixture. 5. Add Nuosept® 44/Integra® 44 and mix well.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
13
Bathroom cream cleaner 11678-7-33 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
91.267
Citric acid (solid)
4.000
Fisher
C9-11 alcohol/8EO (Synperonic 91/8)
1.210
Uniqema
Polectron® 430/Antara® 430
1.000
ISP
Styleze® W-20
1.000
ISP
Lactic acid
0.520
Fisher Scientific
Easy-Wet™ 20
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Polysorbate 80
0.070
A & E Connock Ltd.
Perfume/Fragrance
0.033 Total
Supplier
100.000
Formulation instructions 1. Add citric acid and lactic acid into water. 2. Add Synperonic 91/8, Styleze® W-20, Easy-Wet™ 20 and Polectron® 430/Antara® 430, respectively. While adding, make sure each one dissolves completely. 3. Premix Polysorbate 80 and Fragrance then add into formulation. 4. Add Nuosept® 44/Integra® 44.
Institutional bathroom cleaner featuring Easy-Wet™ 20 and NEP® 11678-152-33 Formulation Ingredients
% W/W
Supplier
Aqua/water (D.I. water)
80.34
C12-C14/30 EO Na Sulfate(Disponil FES 77)
7.000
Cognis
Plantacare 818 (Cocoglucoside)
5.300
Cognis
Sulfamic acid
5.100
Fisher
NEP® solvent
2.000
ISP
Easy-Wet™ 20
0.150
ISP
Polysorbate 80
0.077
A & E Connock Ltd.
Perfume/Fragrance
0.033
As required
Total
100.000
Formulation instructions 1. Mix the sulfamic acid with the water. 2. Add the other ingredients except for the Fragrance and the Polysorbate 80 in the order listed, stirring thoroughly after each addition to ensure each one has dissolved. 3. Mix the Fragrance with the Polysorbate 80, add to the formulation and mix well.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
14
Opaque toilet bowl cleaner, chlorine based 11678- 69-19 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
66.550
Supplier
Jaypol® AT4
5.000
ISP
NaOH (50% aq. solution)
0.600
Local supplier
Sodium hypochloride (14% active chlorine)
15.000
Local supplier
Sodium xylene sulphonate (Stepanate SXS 40)
5.000
Stepan
Sodium lauryl sarcosinate (Protelan LS 9011 )
1.500
Zschimmer& Schwarz
Lauryl dimethyl amine oxide (Amphotenside DMOX)
4.500
Zschimmer& Schwarz
Easy-Wet™ 20
0.200
ISP
NEP® solvent
1.000
ISP
Perfume/Fragrance
0.050
Polysorbate 80
0.100
A & E Connock Ltd.
0.500
ISP
Polectron® 430/Antara® 430 Total
100.000
Formulation instructions 1. Add Jaypol® AT4 to water and mix. After mixing, neutralize with NaOH. 2. Add the other ingredients except for the Fragrance and the Polysorbate 80 in the order listed, stirring thoroughly after each addition to ensure each one has dissolved. 3. Mix Fragrance with Polysorbate 80. 4. Add Fragrance mixture to the formulation and Polectron® 430/Antara® 430.
Acidic toilet bowl cleaner featuring Sorez™ HS-205 11678- 71-60 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
84.380
Jaypol® N-100
0.570
ISP
Sorez™ HS-205
1.000
ISP
Citric acid (granular)
4.000
Fisher
Lactic acid (Purac 88)
0.520
Purac
Sodium lauryl ether sulphate 70% (Texapon N70)
7.000
Cognis
C9-11 Alcohol/8EO (Synperonic 91/8)
1.000
Uniqema
NEP® solvent
1.000
ISP
Dye (1% aqueous solution)
0.040
Polysorbate 80
0.060
Perfume/Fragrance
0.030
Nuosept® 44/Integra® 44
0.400 Total
Supplier
A & E Connock Ltd. ISP
100.000
Formulation instructions 1. Dissolve Jaypol® N-100 into the water. 2. Add the other ingredients except for the Perfume/Fragrance, dye, Polysorbate 80 and Nuosept® 44 or Integra® 44 in the order given above and mix well between each addition.
3. Mix the Perfume/Fragrance with Polysorbate 80. 4. Add the Perfume/Fragrance mixture and the dye solution to the mixture. 5. Add the Nuosept® 44/Integra® 44 and mix well.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
15
Wooden surface cleaner 11363-152-43 Formulation Ingredients
% W/W
Supplier
Aqua/water (D.I. water)
72.050
Jaypol® AT4
2.250
ISP
Potassium cocoate (Flerogum K38)
13.000
Zschimmer & Schwarz
Sodium lauryl sulphate (25% aq. solution) (Texapon K12P)
6.200
Cognis
Lauryl dimethyl amine oxide (Amphotenside DMOX)
4.500
Zschimmer & Schwarz
Isopropanol (IPA)
0.520
Fisher Scientific
Surfadone® LP-100
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Dye
0.400
Potassium hydroxide (KOH 50% aq. solution)
0.350
PVP K-90
0.200
ISP
Polysorbate 80
0.017
A & E Connock Ltd.
Perfume/Fragrance
Fisher
0.008 Total
100.000
Formulation instructions 1. Dissolve PVP K-90 into water. 2. Add Jaypol® AT4. 3. Neutralize with KOH. 4. Add IPA, Flerogum K38, Surfadone® LP-100, lauryl dimethyl amine oxide, sodium lauryl sulphate (prepared 25% solution) and dye solution (1%), respectively. 5. Premix Polysorbate 80 and Fragrance then add into formulation. 6. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
16
Wooden surface cleaner with ISP MicroBeads™ 20277 11364-62-B13 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
73.750
Potassium cocoate (Flerogum K38)
13.000
Zschimmer & Schwarz
Lauryl dimethyl amine oxide
4.500
Zschimmer & Schwarz
Xanthan gum (Keltrol T)
1.000
CP Kelco
ISP MicroBeads™ 20277
0.400
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Dye
0.400
Polysorbate 80
0.017
Perfume/Fragrance
0.008
Sodium lauryl sulphate (25%) (Texapon K12P)
6.200
Cognis
0.500
ISP
Surfadone® LP-100 Total
Supplier
A & E Connock Ltd.
100.000
Formulation instructions 1. Add Keltrol T to water and mix for 20 minutes until it dissolves. 2. Add Flerogum K38, Surfadone® LP-100, lauryl dimethyl amine oxide, sodium lauryl sulphate and dye solution (1%) respectively. 3. Premix Polysorbate 80 and Fragrance then add into formulation. 4. Add Nuosept® 44/Integra® 44 and ISP MicroBeads™ 20277 with slow gentle mixing.
Wooden surface polish and cleaner 11539-66-25 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
79.700
PVP/VA W-735
9.000
ISP
C9-11 Alcohol/8EO (Synperonic 91/8)
5.000
Uniqema
Jaypol® AT4
2.000
ISP
Wax emulsion (Poligen WE-1)
1.000
BASF
Easy-Wet™ 20
1.000
ISP
Tributoxy ethyl phosphate (Amgard TBEP)
1.000
Stepan
Polectron® 430/Antara® 430
0.750
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Sodium hydroxide (NaOH 50% aq. solution)
0.120
Fisher
Polysorbate 80
0.020
A & E Connock Ltd.
Perfume/Fragrance
Supplier
0.010 Total
Formulation instructions 1. Add Jaypol® AT4 into water. 2. Then neutralize with NaOH and mix to obtain clear solution. 3. Add PVP/VA W-735, Polectron® 430/Antara® 430, TBEP, Easy-Wet™ 20,
100.000
Synperonic 91/8, Poligen WE-1, respectively. 4. Premix Polysorbate 80 and Fragrance then add into formulation. 5. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
17
Glass cleaning wipes 11040-92-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
89.700
Supplier
Isopropyl alcohol (Isopropanol)
9.000
Fisher
Dipropylene glycol methyl ether (Dowanol DPM)
1.000
Dow
Surfadone® LP-100
0.150
ISP
Nuosept® 44/Integra® 44
0.150
ISP
Total
100.000
Formulation instructions 1. Add the ingredients in the order listed, stirring thoroughly after each addition. 2. Spray onto wipes and package in air-tight containers.
Anti-misting glass cleaner 11539-125-185 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
92.450
Gantrez® 97 HSU solution (as supplied)
0.400
ISP
Isopropanol (IPA)
5.000
As required
Sodium lauryl ether sulphate 70% paste (Texapon N70)
1.000
Cognis
Nuosept® 44/Integra® 44
0.400
ISP
Ammonium hydroxide (28%)
0.300
Fisher
Polysorbate 80
0.250
A & E Connock Ltd.
Easy-Wet™ 20
0.130
ISP
Perfume/Fragrance
0.050
As required
Dye
0.020 Total
Supplier
100.000
Formulation instructions 1. Add Easy-Wet™ 20, sodium lauryl ether sulphate, Gantrez® 97 HSU solution (as supplied), ammonium hydroxide and dye solution (1%) into water. During addition, ensure that each one dissolves completely. 2. Premix Polysorbate 80 and Fragrance then add into formulation. 3. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
18
Anti-static screen cleaner featuring Ceraphyl® 60 and Ceraphyl® 65 11678- 40-10 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
96.600
Ceraphyl® 60
1.200
ISP
Ceraphyl® 65
0.600
ISP
C9-11 alcohol/8EO (Synperonic 91/8)
0.500
Uniqema
NEP® solvent
1.000
ISP
0.100
ISP
Nuosept® 44/Integra® 44 Total
Supplier
100.000
Formulation instructions 1. Add ingredients respectively. Make sure ingredient dissolves before adding the following one. 2. Add Nuosept® 44/Integra® 44 to the formulation.
Ceramic tile cleaner 11364-18-8 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
77.325
Supplier
Potassium cocoate (Flerogum K38)
13.000
Zschimmer & Schwarz
Lauryl dimethyl amine oxide (Amphotenside DMOX)
4.500
Zschimmer & Schwarz
C9-11 Alcohol/8EO (Synperonic 91/8)
1.280
Uniqema
Surfadone® LP-100
1.000
ISP
NEP® solvent
0.520
ISP
Dye
0.500
Potassium hydroxide (KOH 50% aq. solution)
0.500
Fisher
Gantrez® AN-169 BF (powder)
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Polysorbate 80
0.375
A & E Connock Ltd.
Perfume/Fragrance
0.100 Total
100.000
Formulation instructions 1. Dissolve the Gantrez® AN-169 BF in water by heating at 50°C in water. Cool down to room temperature (add evaporated water). 2. Neutralize with KOH. 3. Add NEP®, Flerogum K38, Surfadone® LP-100, lauryl dimethyl amine oxide, Synperonic 91/8 and dye solution (1.0%) respectively. 4. Premix Polysorbate 80 and Fragrance then add into formulation. 5. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
19
Ceramic tile cleaner with ISP MicroBeads™ 20277 11364-72-F4 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
76.815
Potassium cocoate (Flerogum K38)
13.000
Zschimmer & Schwarz
Lauryl dimethyl amine oxide (Amphotenside DMOX)
4.500
Zschimmer & Schwarz
C9-11 Alcohol/8EO (Synperonic 918)
2.280
Uniqema
Surfadone® LP-100
1.000
ISP
Xanthan gum (Keltrol T)
1.000
CP Kelco
NEP® solvent
0.500
ISP
ISP MicroBeads™ 20277
0.400
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Dye
0.008
Polysorbate 80
0.017
Perfume/Fragrance
0.008 Total
Supplier
A & E Connock Ltd.
100.000
Formulation instructions 1. Add Keltrol T to water and mix until dissolves. 2. Add Flerogum K38, Surfadone® LP-100, lauryl dimethyl amine oxide, NEP®, Synperonic 91/8 and dye solution (0,5%) respectively. 3. Premix Polysorbate 80 and Fragrance then add into formulation. 4. Add Nuosept® 44/Integra® 44 and ISP MicroBeads™ 20277 with slow gentle mixing.
Stainless steel cleaner 11364-145-10 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
83.475
PEG 12 dimethicone (SF-1288)
5.000
NEP® solvent
4.000
ISP
Citric acid (solid)
3.700
Fisher
Sodium lauryl ether sulphate 70% (Texapon N70)
1.500
Cognis
C12-C18 Alcohol/7EO (Dehydol LT 7)
1.000
Cognis
Surfadone® LP-100
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Phosphoric acid (80%)
0.400
Fisher
Polysorbate 80
0.017
A & E Connock Ltd.
Perfume/Fragrance
0.008 Total
Supplier Bayer
100.000
Formulation instructions 1. Add citric acid and Phosphoric acid into the water. 2. Add NEP®, sodium lauryl ether sulphate, Dehydol LT 7, Surfadone® LP-100 and SF-1288 respectively. 3. Premix Polysorbate 80 and Fragrance then add into formulation. 4. Add Nuosept® 44/Integra® 44. ™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
20
Stainless steel gel cleaner 11539-118-25 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
82.730
Supplier
PEG 12 Dimethicone (SF-1288)
5.000
NEP® solvent
4.000
Bayer ISP
Citric acid (solid)
3.700
Fisher
Sodium lauryl ether sulphate 70% (Texapon N70)
1.500
Cognis
C12-C18 alcohol/7EO (Dehydol LT 7)
1.000
Cognis
Xanthan gum (Keltrol T)
0.655
CP Kelco
Surfadone® LP-100
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Phosphoric acid (80%)
0.400
Fisher
Glitter
0.080
Nanyang Lingbao Pearl Pigment Co., Ltd.
Polysorbate 80
0.010
A & E Connock Ltd.
Perfume/Fragrance
0.020 Total
100.000
Formulation instructions 1. Put Keltrol T into water to dissolve and swell. 2. Add citric acid and Phosphoric acid into water. 3. Add NEP®, sodium lauryl ether sulphate, Dehydol LT 7, Surfadone® LP-100 and SF-1288, respectively. 4. Premix Polysorbate 80 and Fragrance then add into formulation. 5. Add Nuosept® 44/Integra® 44. 6. Add grey glitter to the formulation and stir.
Carpet cleaner 11040-77-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
76.830
Isopropyl alcohol (Isopropanol)
10.000
Supplier Fisher Scientific
Sodium lauryl sulphate (dodecyl sulphate, sodium salt 70%)
10.000
Sigma Aldrich
Cocamide DEA (Purton CFD)
2.000
Zschimmer & Schwarz
Surfadone® LP-100
1.000
ISP
Nuosept® 44/Integra® 44
0.150
ISP
Perfume/Fragrance
0.010
Dye
0.010 Total
100.000
Formulation instructions 1. Dissolve sodium lauryl sulphate in water. 2. Add the Cocamide DEA, isopropyl alcohol and Surfadone® LP-100. 3. Add Nuosept® 44/Integra® 44, dye and Fragrance, mix until homogenous.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
21
Machine carpet cleaner 11040-81-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
76.320
Butyl carbitol
8.000
Dow
Tetrapotassium pyrophosphate (28%)
7.500
Albright and Wilson
Eltesol SX 40
6.500
Huntsman
Surfadone® LP-100
1.000
ISP
EDTA 38% (EDTA)
0.500
Fisher
Nuosept® 44/Integra® 44
0.150
ISP
Phosphoric acid (85%) pH 7
0.010
Perfume/Fragrance
0.010
Dye
Supplier
0.010 Total
100.000
Formulation instructions 1. Dissolve all solids in water. 2. Then add the remaining ingredients and mix until homogenous.
Carpet spot cleaner 11678-29-11 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
95.403
Gantrez® 97 HSU solution (as supplied)
0.400
NEP® solvent
4.000
ISP
C12-C18 Alcohol/7EO (Dehydol LT 7)
0.600
Cognis
Integra® 44
0.400
ISP
Polysorbate 80
0.077
A & E Connock Ltd.
Perfume/Fragrance
0.033
As Required
Total
Supplier ISP
100.000
Formulation instructions 1. Add ingredients respectively to water. During addition, ensure that each one dissolves completely. 2. Premix Fragrance with Polysorbate 80. 3. Add Fragrance mixture to the formulation. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
22
Floor polish 11040-76-2 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
42.060
Supplier
Primal B-924
37.310
Rohm & Haas
Wax emulsion (Poligen WE-1)
7.590
BASF
Primal E-1531
5.920
Rohm & Haas
Dipropylene glycol methyl ether (Dowanol DPM)
3.340
Dow
NEP® solvent
1.200
ISP
Tributoxy ethyl phosphate
1.130
Aldrich
Dibutyl phthalate
1.130
Aldrich
Nuosept® 44/Integra® 44
0.150
ISP
Wacker SRE (Polydimethylsiloxane)
0.100
Wacker
Surfactant FC-120
0.040
3M
Surfadone® LP-300
0.030
ISP
Total
100.000
Formulation instructions 1. Mix chemicals in the following order: Water, Surfactant FC-120, Surfadone® LP-300, Wacker SRE, Dipropylene glycol methyl ether, NEP®, Dibutyl phthalate, Tributoxy ethyl phosphate and Nuosept® 44/Integra® 44. Mix for a few minutes. 2. Slowly add Primal B-924 with constant stirring and continue to stir for 30 minutes. 3. Slowly add Primal E-1531 with constant stirring and continue to stir for 10 minutes. 4. Slowly add Poligen WE-1 with constant stirring and continue to stir for 1 hour. 5. Stand for a day before use.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
23
Abrasive cleaner 11539-63-14 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
44.570
Supplier
Calcium Carbonate (CACO3 Omyacarb 40 GZ)
50.000
Omya UK
C12-C18 EO (Dehydol LT 7)
2.000
Cognis
Lauryl alkyl benzene sulphonate (Disponil LDBS-25)
2.000
Cognis
Crosslinked polyacrylic acid polymer/rheology modifier (Carbopol ETD 2623)
0.300
Noveon
Easy- Wet™ 20
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Ammonium hydroxide (28%)
0.130
Fisher
Polysorbate 80
0.200
A & E Connock Ltd
Sodium hydroxide (NaOH 50% aq. solution)
0.250
Fisher
Perfume/Fragrance
0.100 Total
100.000
Formulation instructions 1. Add Carbopol ETD to water and mix until it dissolves. Neutralize with NaOH. 2. Mix to obtain clear solution. Add ammonium hydroxide. 3. Add calcium carbonate and mix. 4. Add Disponil LBDS-25, Dehydol LT 7, Easy-Wet™ 20 respectively. 5. Premix Polysorbate 80 and Fragrance then add into formulation. 6. Add Nuosept® 44/Integra® 44.
Power cream all-purpose cleaner 11678-16-36 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
76.440
Sodium hypochlorite (14% active chlorine)
15.000
Sodium xylene sulfonate (Stapanate SXS 40)
5.000
Aldrich
Sodium lauryl sarcosinate (Protelan LS-9011)
1.500
Zschimmer & Schwarz
NEP® solvent
1.000
ISP
Polysorbate 80
0.650
A & E Connock Ltd.
Perfume/Fragrance
0.100
Easy-Wet™ 20
0.220 Total
Supplier Fisher
ISP
100.000
Formulation instructions 1. Add sodium hypochlorite, sodium xylene sulphonate, Protelan LS-9011, NEP® and Easy-Wet™ 20 into water. During addition, ensure each one dissolves completely. 2. Premix Polysorbate 80 and Fragrance then add into formulation.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
24
Institutional all-purpose cleaner formulation featuring Jaypol® S44 11678-144-8
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
91.730
Supplier
Texapon N70 (Sodium lauryl ether sulphate 70%)
2.500
Jaypol® S44
2.000
ISP
Sodium lauroyl sarcosinate (Protelan LS 9011)
1.250
Zschimmer & Schwarz
Lauryl dimethyl amine oxide (Amphotenside DMOX)
1.250
Zschimmer & Schwarz
Cognis
HEDP
0.500
Nuosept® 44
0.400
ISP
Surfadone® LP-100
0.150
ISP
NaOH 50%
0.170
Polysorbate 80
0.034
A & E Connock Ltd.
0.016
As required
Perfume/Fragrance Total
100.000
Formulation instructions 1. Add ingredients respectively to deionized water. While adding, make sure each one dissolves completely. Adjust pH with Citric acid around 7.00. 2. Mix Fragrance with Polysorbate 80. 3. Add Fragrance mixture to the formulation.
Institutional grill cleaner featuring Jaypol® M30 11678-149-18 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
72.400
Sodium metasilicate
8.300
Texapon N70 (Sodium lauryl ether sulphate)
5.000
Supplier
Cognis
NaOH 50%
4.500
NEP® solvent
4.000
ISP
Plantacare 818 (Cocoglucoside)
3.000
Cognis
Jaypol®M30
2.000
ISP
ATMP
0.750
Polysorbate 80
0.034
A & E Connock Ltd.
0.016
As required
Perfume/Fragrance Total
100.000
Formulation instructions 1. Add ingredients respectively into the water while adding, make sure each one dissolves completely. Adjust pH with NaOH 50% to 13.00. 2. Mix Fragrance with Polysorbate 80. 3. Add Fragrance mixture to the formulation.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
25
Air freshener (formula #1) 11040-80-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
92.740
Isopropyl alcohol (Isopropanol)
5.000
Perfume/Fragrance lemon
2.000
Nuosept® 44/Integra® 44
0.150
ISP
Surfadone® LP-300
0.100
ISP
Dye
0.010 Total
Supplier Fisher Scientific
100.000
Formulation instructions 1. Add isopropyl alcohol and Surfadone® LP-300 to the lemon Fragrance. 2. Add water, followed by dye and Nuosept® 44/Integra® 44.
Liquid hand soap 11040-61-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
80.320
Sodium lauryl ether sulphate 70% paste (Zetesol 270 N)
15.000
Zschimmer & Schwarz
Alkyl dimetyl amine betaine (Empigen BB)
2.000
Huntsman
Sodium chloride
1.500
Fisher
Surfadone® LP-300
1.000
ISP
Nuosept® 44/Integra® 44
0.150
ISP
Citric acid
0.010
Perfume/Fragrance
0.010
Dye
Supplier
0.010 Total
100.000
Formulation instructions 1. Dissolve sodium lauryl ether sulphate, Surfadone® LP-300 and Empigen BB in water. 2. Add sodium chloride and adjust pH to 6.5~7.0 with citric acid or caustic soda. 3. Add Nuosept® 44/Integra® 44, dye and Fragrance.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
26
Paper soap 11539-130-9 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
74.620
Sodium lauryl sulphate (25% aq. solution) (Texapon K12P)
20.580
Huntsman, Rhodia
Aquazol® 500
5.000
ISP
Ceraphyl® 60
1.000
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Polysorbate 80
0.184
A & E Connock Ltd.
Perfume/Fragrance
0.036
Dye
0.020 Total
Supplier
100.000
Formulation instructions 1. Add Aquazol® 500 into water and mix well until it dissolves completely. 2. Add sodium lauryl sulphate (prepared 25% solution), Ceraphyl® 60 and dye solution (1%). 3. Premix Polysorbate 80 and Fragrance then add into formulation. 4. Add Nuosept® 44/Integra® 44. 5. Then pour constant amount of solution into a mold. Put in an oven and keep it at 100°C until all the water has evaporated. 6. Remove it from the mold.
Hand gel cleaner with ISP MicroBeads™ 20279 11364-61-C6 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
93.405
Jaypol® TTA
3.000
ISP
Sodium laureth sulphate 70% (Texapon N70)
2.500
Cognis
Ceraphyl® 60
0.500
ISP
Nuosept® 44/Integra® 44
0.160
ISP
Sodium hydroxide (NaOH 50% aq. solution)
0.210
Fisher
ISP MicroBeads™ 20279
0.100
ISP
Dye
0.100
Polysorbate 80
0.017
Perfume/Fragrance
0.008 Total
Supplier
A & E Connock Ltd.
100.000
Formulation instructions 1. Add Jaypol® TTA to water and mix for 20 minutes at high speed at 80°C. 2. After hydration, cool and add NaOH to neutralize. 3. Add Sodium laureth sulphate 70%, Ceraphyl® 60 and prepared dye solution (1%) and mix. 4. Premix Polysorbate 80 and Perfume 2:1 then add into formulation. 5. Add Nuosept® 44/Integra® 44 and ISP MicroBeads™ 20279 with slow, gentle mixing.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
27
Liquid laundry detergent (clear and non-builder) 11040-64-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
53.700
Supplier
Sodium alkyl benzene sulphonate 50% paste (Unisan SS5053)
25.600
Rhodia
Sodium lauryl ether sulphate 70% paste (Zetosol 270 N)
15.000
Zschimmer & Schwarz
C9–11 Alcohol/8EO (Synperonic 91/8)
3.000
Uniqema
Soda ash
1.000
Fisher
Surfadone® LP-100
1.000
ISP
PVP K-30
0.500
ISP
Nuosept® 44/Integra® 44
0.150
ISP
CI fluorescent brightener 35 (Tinopal CBS-X)
0.050
Ciba Geigy
Perfume/Fragrance
qs
Dye
qs Total
100.000
Formulation instructions 1. Dissolve Unisan SS5053 in water. 2. Add Tinopal CBS-X, soda ash and PVP K-30. 3. Add Sodium lauryl ether sulphate 70%, C9–11 Alcohol/8EO (Synperonic 91/8) and Surfadone® LP-100 and stir until all ingredients are dissolved. 4. Add Nuosept® 44/Integra® 44, dye and Fragrance.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
28
Concentrated Liquid Laundry Detergent Featuring Surfadone® LP-100 11678-129-2 Formulation Ingredients
% W/W
Supplier
Aqua/water (D.I. Water)
22.77
Texapon N70 (Sodium lauryl ether sulphate 70%)
24.00
Cognis
Lauryl alkyl benzene sulphonate (Disponil LDBS-25)
14.40
Cognis
Trisodium citrate dihydrate
12.08
Fisher
7.24
Clariant
Fatty alcohol polyglycol ether laureth 5 (Genapol LA-050) Propylene glycol
9.60
Aldrich
Alkyl polyglycol ether with 11 EO (Emulsogen LCN 118)
7.24
Clariant
Gantrez® 97 HSU solution (as supplied)
1.92
ISP
Surfadone® LP-100
0.60
Nuosept® 44/Integra® 44
0.08
ISP
Perfume/Fragrance
0.006
As Required
Polysorbate 80
0.017
A & E Connock Ltd.
Total
ISP
100.000
Formulation instructions 1. Dissolve the Genapol LA-050, Disponil LDBS-25 and sodium lauryl ether sulphate 70% into the water. 2. Add the other ingredients except for the perfume/Fragrance, Polysorbate 80 and Nuosept® 44 or Integra® 44 in the order given above and mix well. 3. Dissolve the perfume/Fragrance into the Polysorbate 80 and add to the mixture. 4. Add the Nuosept® 44/Integra® 44 and mix well.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
29
Color safe liquid laundry detergent 11364-31-9 Formulation Ingredients
% W/W
Supplier
Aqua/water (D.I. water)
61.16
Sodium lauryl ether sulphate 70% paste (Texapon N70)
9.660
Cognis
Lauryl alkyl benzene sulphonate (Disponil LDBS-25)
6.040
Cognis
Trisodium citrate dihydrate
6.040
Fisher
Propylene glycol
3.620
Aldrich
Fatty alcohol polyglycol ether laureth 5 (Genapol LA-050)
3.620
Clariant
Alkyl polyglycol ether with 11 EO (Emulsogen LCN 118)
3.620
Clairant
Gantrez® 97 HSU solution (as supplied)
0.960
ISP
NEP® solvent
2.410
ISP
Easy-Wet™ 20
1.200
ISP
Chromabond™ S-403 E
0.600
ISP
Sorez™ 100
0.600
ISP
Integra® 44
0.400
ISP
Dye
0.040
Perfume/Fragrance
0.006
As required
Polysorbate 80
0.017
A & E Connock Ltd
Total
100.000
Formulation instructions
1. Dissolve the Genapol LA-050, Disponil LDBS-25 and Sodium lauryl ether sulphate 70% into the water. 2. Add other ingredients respectively. 3. Prepare 0.5% solution with the dye and add to the mixture. 4. Dissolve the Fragrance in Polysorbate 80 and add mix to the mixture. 5. Add Nuosept®44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
30
Liquid laundry detergent with ISP MicroBeads™ 20278 (formula #2) 11364-72-E4
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
81.875
Supplier
Sodium laureth sulphate 70% (Texapon N70)
8.000
Cognis
Lauryl alkyl benzene sulphonate (Disponil LDBS-25)
5.000
Huntsman
Sodium chloride (NaCl solid)
1.500
Fisher
Easy-Wet™ 20
1.000
ISP
Fatty alcohol polyglycol ether Laureth 5 (Genapol LA-050)
1.000
Clariant
Xanthan gum (Keltrol T)
0.500
CP Kelco
Nuosept® 44/Integra® 44
0.400
ISP
Dye
0.400
ISP MicroBeads™ 20278
0.200
ISP
Calcium chloride (CaCl2 solid)
0.100
Fisher
Polysorbate 80
0.017
A & E Connock Ltd.
Perfume/Fragrance
0.008 Total
100.000
Formulation instructions 1. Add the Keltrol T to the water at very high speed and mix for 20 minutes until dissolves. 2. Add the Genapol LA-050, Sodium lauryl ether sulphate 70%, Disponil LDBS-25, Easy-Wet™ 20, CaCl2 and NaCl into the mixture. 3. Prepare a 0.5% solution with the dye and add into the mixture. 4. Dissolve the Fragrance in the Polysorbate 80 and add mix into the mixture. 5. Add Nuosept® 44/Integra® 44. 6. Add the ISP MicroBeads™ 20278 with slow, gentle mixing.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
31
Fabric softener featuring Jaypol® 213 11678-115-1 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
93.065
Supplier
Cationic surfactant (Esterquat)
6.200
Evonik
Jaypol® 213
0.650
ISP
Phosphoric acid
0.045
Fisher
Nuosept® 515
0.040
ISP
Total
100.000
Formulation instructions
1. Mix the water and the Phosphoric acid at 60°C. (Phase A) 2. Heat the Esterquat to 60°C. (Phase B) 3. Add Phase B to Phase A under high-speed stirring. 4. Cool the mixture to 25°C and add the Jaypol® 213 and the Nuosept® 515 and mix well.
Fabric softener, 3 formulations A, B and C 11040-69
Formulation % W/W
Ingredients Aqua/water (D.I. water)
A
B
C
Supplier
92.630
92.950
92.950
Adogen® 442 ditallow dimethyl ammonium chloride
6.70
6.70
/
Degussa
Surfadone® LP-100
0.50
/
/
ISP ISP
Nuosept® 44/Integra® 44
0.15
0.15
0.15
Perfume/Fragrance
0.010
0.010
0.010
Dye
0.010
0.010
0.010
/
/
6.70
Akzo Nobel
100.000
100.000
100.000
100.000
Arquad® 2HT-75 ditallow dimethyl ammonium chloride Total
Formulation instructions 1. Warm Adogen® 442 or Arquad® 2HT-75 to 55°C, then add into water and stir well at 55°C. 2. Cool to 35°C. 3. Add Surfadone® LP-100, Nuosept® 44/Integra® 44, Fragrance and dye.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
32
Laundry pre-spotter 11363-25-39 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
85.070
NEP® solvent
4.000
ISP
Ammonium nonylphenol Ethoxylate sulfate 4EO (Polystep B-1)
3.050
Stephan
Jaypol® AT4
2.000
ISP
Citric acid (granular)
2.000
Aldrich
Sodium hydroxide (NaOH 50% aqueous solution)
2.250
Fisher
Easy-Wet™ 20
0.500
ISP
Sorez™ 100
0.500
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Titriplex III (Disodium EDTA)
0.200
S. Black
Polysorbate 80
0.020
A & E Connock Ltd.
Perfume/Fragrance
0.010
As required
Total
Supplier
100.000
Formulation instructions 1. Dissolve the disodium EDTA in water. 2. Add in the following order: Polystep B-1, Citric acid, Sorez™ 100, Jaypol® AT4, NEP® and Easy-Wet™ 20, mixing well between each addition. 3. Neutralize with NaOH. 4. Dissolve the Perfume/Fragrance in Polysorbate 80 and add to the mixture. 5. Add Nuosept® 44/Integra® 44 and mix well.
Pre-treatment stain remover featuring Sorez™ 100 ISPM – 18.06.2010-1
Formulation Ingredients
% W/W
Supplier
Aqua/water (D.I. water)
91.800
Dehydol LT (100% fatty alcohol 7 moles EO)
4.500
Cognis
Dehypon LS-54 (100% fatty alcohol EO and 4 moles P07)
1.500
Cognis
Sodium lauryl ether sulphate (30%)
1.000
Sorez™ 100
1.000
ISP
0.200
ISP
Nuosept® 44/Integra® 44 Total
100.000
Formulation instructions 1. Dissolve Dehydol LT into water at 30°C. 2. Add Dehydol LS-54 and sodium lauryl ether sulphate (30%). 3. Prepare 0.5% solution with the dye and add to the mixture. 4. Add Sorez™ 100 (transparent) and then Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
33
Protective spray 11126-67-1
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
45.000
Alcohol denat. (Ethanol Absolute)
45.000
Fisher
10.000
ISP
Aquazol® 200 Total
Supplier
100.000
Formulation instructions 1. Mix the deionized water and ethanol together. 2. Under high sheer, add in the Aquazol® 200 and mix for 1 hour. 3. Leave to stand overnight to fully dissolve.
Water soluble film 11178-142-1
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
72.000
Aquazol® 500
28.000 Total
Supplier ISP
100.000
Formulation instructions 1. Heat the water to 60°C. 2. Add the Aquazol® 500 with high speed stirring. 3. Stir for 1 - 2.5 hours until all the Aquazol® 500 has dissolved. 4. Leave to let the air disperse. 5. Cast a film of the solution onto a non-stick surface using a Meyer bar to give a dry-film of 100-150 microns. 6. Dry for 5 minutes at 130°C.
Water soluble film with delayed solubility 11178-142-2
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
56.470
Aquazol® 500
21.960
Styleze® CC-10
19.610
ISP
Propylene glycol
1.960
Aldrich
Total
Supplier ISP
100.000
Formulation instructions 1. Heat the water and the Propylene glycol to 60°C. 2. Add the Aquazol® 500 with high speed stirring. 3. Stir for 1 - 2.5 hours until all the Aquazol® 500 has dissolved. 4. Add the Styleze® CC-10 and stir for 30 minutes.
5. Leave to let the air disperse. 6. Cast a film of the solution onto a non-stick surface using a Meyer bar to give a dry-film of 100-150 microns. 7. Dry for 5 minutes at 130°C.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
34
Water soluble flexible film 11178-142-3 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
69.840
Aquazol® 500
27.160
ISP
3.000
Aldrich
Propylene glycol Total
Supplier
100.000
Formulation instructions 1. Heat the water and the Propylene glycol to 60°C. 2. Add the Aquazol® 500 with high speed stirring. 3. Stir for 1 - 2.5 hours until all the Aquazol® 500 has dissolved. 4. Leave to let the air disperse. 5. Cast a film of the solution onto a non-stick surface using a Meyer bar to give a dry-film of 100-150 microns. 6. Dry for 5 minutes at 130°C.
Washing-up liquid featuring Surfadone® LP-300 (formula #1) 11040-96-1
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
78.280
Supplier
Alkyl benzene sulphonic acid (LABSA)
9.800
Huntsman, Rhodia
Sodium lauryl ether sulphate 70% paste
5.800
Huntsman, Rhodia
Sodium hydroxide 50%
2.550
Fisher
Surfadone® LP- 300
1.000
ISP
Cocamide DEA (Cocodiethanol amide)
1.000
Aldrich
Sodium chloride
0.400
Fisher
Nuosept® 44/Integra® 44
0.150
ISP
Citric acid (10% aqueous solution)
1.000
Fisher
Perfume/Fragrance
0.010
Dye
0.010 Total
100.000
Formulation instructions 1. Add Sodium hydroxide to water. 2. Add Alkyl benzene sulphonic acid, stir until neutralized. 3. Add Sodium lauryl ether sulphate 70%, cocodiethanol amide and Surfadone® LP-300, stir until all ingredients are dissolved. 4. Add Nuosept® 44/Integra® 44, dye, lemon and citric acid. 5. Add Sodium chloride.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
35
Washing-up liquid featuring Surfadone® LP-300 (formula #2) 11040-97-1
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
79.330
Supplier
Sodium lauryl ether sulphate 70% paste
15.000
Huntsman, Rhodia
Sodium chloride
2.500
Fisher
Surfadone® LP-300
1.000
ISP
Coconut diethanolamine
1.000
Aldrich
Nuosept® 44/Integra® 44
0.150
ISP
Citric acid (10% aqueous solution)
1.000
Fisher
Perfume/Fragrance
0.010
Dye
0.010 Total
100.000
Formulation instructions 1. Charge the water into the vessel. 2. Add the Sodium lauryl ether sulphate 70% paste, stir with mechanical stirrer until dissolved. 3. Add Coconut diethanolamine and Surfadone® LP-300, stir until dissolved. 4. Add Nuosept® 44/Integra® 44, dye and Fragrance, stir until homogeneous. 5. Add Sodium chloride. 6. Adjust pH to 6.8~7.0 with Citric acid.
Ecological washing-up liquid 11040-98-1
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
68.930
Sodium lauryl ether sulphate 70% paste (Zetosol 270 N0)
16.900
Zschimmer & Schwarz
Empigen BB (N, N-Dimethyl-N-dodecylglycerine Betaine)
6.500
Huntsman
Empigen OB (lauryl dimethyl amine oxide) (Empigen OB)
3.500
Huntsman
Sodium chloride
1.000
Fisher
Surfadone® LP-100
1.000
ISP
Empilan KB9 (lauryl alcohol ethoxylate (9EO))
1.000
Huntsman
Nuosept® 44/Integra® 44
0.150
ISP
Citric acid (10% aqueous solution)
1.000
Fisher
Perfume/Fragrance
0.010
Dye
Supplier
0.010 Total
100.000
Formulation instructions 1. Charge water into the vessel. 2. Add Sodium lauryl ether sulphate 70% paste, and stir until dissolved. 3. Add Empigen BB, Empilan KB9 and Empigen OB, stir until dissolved.
4. Add Nuosept® 44/Integra® 44, dye and lemon Fragrance. 5. Add NaCl. 6. Adjust pH to 6.8~7.0 with Citric acid or NaOH.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
36
Washing-up liquid with ISP MicroBeads™ 20278 (formula #1) 11364-71-D13
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
80.155
Sodium lauryl ether sulphate (Texapon N70)
15.000
Cognis
Sodium chloride (NaCl solid)
1.500
Fisher
Surfadone® LP-300
1.000
ISP
Cocamide diethanol amide (Purton CFD)
1.000
Zschimmer & Schwarz
Nuosept® 44/Integra® 44
0.400
ISP
Dye
0.400
ISP MicroBeads™ 20278
0.200
ISP
Xanthan gum (Keltrol T)
0.200
CP Kelco
Calcium chloride (CaCl2 solid)
0.120
Fisher
Polysorbate 80
0.017
A & E Connock Ltd.
Perfume/Fragrance
0.008 Total
Supplier
100.000
Formulation instructions 1. Add calcium chloride to water then add Keltrol T and mix at very high speed for 20 minutes until dissolved. 2. Add sodium lauryl ether sulphate, Cocoamide DEA, Surfadone® LP-300, NaCl and dye solution (1%) and mix well. 3. Dissolve Fragrance in Polysorbate 80 and add mix into the mixture. 4. Add Nuosept® 44/Integra® 44. 5. Add the ISP MicroBeads™ 20278 with slow gentle mixing.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
37
Washing-up liquid featuring Surfadone® LP-100 11364-79-10
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
69.601
Sodium lauryl ether sulphate 70% (Texapon N70)
13.500
Cognis
Sodium C14-17 alkyl sec sulfonate (Hostapur SAS 60)
6.000
Clariant
Fatty alcohol polyglycol ether laureth 5 (Genapol LA-050)
3.000
Clariant
Jaypol® AT4
3.000
ISP
Sodium chloride (NaCl solid)
2.500
Fisher
Lauryl dimethyl amine oxide (30%) (Amphotenside DMOX)
1.000
Zschimmer &Schwarz
Surfadone® LP-100
0.500
ISP
Sodium hydroxide (NaOH 50% aq. solution)
0.460
Fisher
Nuosept® 44/Integra® 44
0.400
ISP
Polysorbate 80
0.026
A & E Connock Ltd.
Perfume/Fragrance
0.013 Total
Supplier
100.000
Formulation instructions 1. Add Jaypol® AT4 into water and add NaOH to neutralize Jaypol® AT4. 2. Mix to obtain clear solution. 3. Add Hostapur SAS 60, sodium lauryl ether sulphate 70%, Genapol LA-050, Surfadone® LP-100, Lauryl dimethyl amine oxide 30% and NaCl. 4. Dissolve the Fragrance in the Polysorbate 80 and add to the mixture. 5. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
38
Washing-up liquid with ISP MicroCapsules™ 4449 11539-72-22
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
69.501
Sodium laureth sulphate 70% (Texapon N70)
13.500
Cognis
Sodium C14-17 alkyl sec sulfonate (Hostapur SAS 60)
6.000
Clariant
Fatty alcohol polyglycol ether laureth 5 (Genapol LA-050)
3.000
Clariant
Sodium chloride (NaCl solid)
2.500
Fisher
Jaypol® AT4
2.300
ISP
Lauryl dimethyl amine oxide (Amphotenside DMOX)
1.000
Aldrich
Synthetic clay (Laponite RD)
0.700
Rockwood
Surfadone® LP-100
0.500
ISP
Sodium hydroxide (NaOH 50% aq. solution)
0.460
Fisher
Nuosept® 44/Integra® 44
0.400
ISP
ISP MicroCapsules™ 4449
0.100
ISP
Polysorbate 80
0.026
A & E Connock Ltd.
Perfume/Fragrance
Supplier
0.013 Total
100.000
Formulation instructions 1. Add Jaypol® AT4, Laponite RD into water and add NaOH to neutralize Jaypol® AT4. 2. Mix to obtain clear solution. 3. Add Hostapur SAS 60, Sodium lauryl ether sulphate 70%, Genapol LA-050, Surfadone® LP-100, Amphotenside DMOX and NaCl. 4. Dissolve the Fragrance in Polysorbate 80 and add to the mixture. 5. Add Nuosept® 44/Integra® 44. 6. Add the ISP MicroCapsules™ 4449 with gentle stirring.
Non-phosphate automatic dishwashing detergent powder featuring Jaypol® HS61 11678-132-2
Formulation Ingredients
% W/W
Supplier
Sodium carbonate
34.340
Fisher
Trisodium citrate dihydrate
34.340
Fisher
Sodium disilicate
9.400
PQ
Sodium percarbonate
9.400
Fisher
Jaypol® HS61 (freeze dried)
7.500
ISP
TAED
3.160
EMPA
Modified fatty alcohol polyglycol ether (Dehypon GRA)
1.860
Cognis
Total
100.000
Formulation instructions 1. Mix the ingredients together in the order listed, stirring thoroughly after each addition.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
39
High phosphate automatic dishwashing detergent powder featuring Jaypol® 2019 11678-132-3
Formulation Ingredients
% W/W
Supplier
Sodium tripolyphosphate
51.200
Fisher
Sodium carbonate
18.800
Fisher
Sodium percarbonate
14.000
Fisher
Jaypol® 2019 (freeze dried)
6.500
ISP
TAED
4.000
EMPA
Modified fatty alcohol polyglycol ether (Dehypon GRA)
3.000
Cognis
Sodium disilicate
2.000
PQ
0.500
Thermphos
Phosphonate (Dequest 2016) Total
100.000
Formulation instructions 1. Add the ingredients in the order listed, stirring thoroughly after each addition.
Non-phosphate automatic dishwashing detergent gel featuring Jaypol® HS61 11678-142-51
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
67.480
Sodium sulphate
7.400
Fisher
Trisodium citrate dihydrate
6.000
Fisher
Sodium metasilicate
5.000
Fisher
Jaypol® HS61
4.000
ISP
Citric acid
3.820
Fisher
Sodium disilicate
2.000
PQ
Modified fatty alcohol polyglycol ether (Dehypon E 124-90)
2.000
Cognis
Jaypol® N-100
1.300
ISP
Phosphonate (Dequest 2016)
0.750
Thermphos
Polysorbate 80
0.120
A & E Connock Ltd.
Perfume/Fragrance
0.050
As required
Dye (1% aqueous solution)
0.040
As required
Nuosept® 44 / Integra® 44
0.040
ISP
Total
Supplier
100.000
Formulation instructions 1. Stir the water to form a vortex, add the Jaypol® N-100 and mix until it has dissolved. 2. Add the following ingredients in the order of: sodium disilicate, Trisodium citrate dihydrate, Sodium metasilicate, Dehypon E 124-90 and Jaypol® HS61, Sodium sulphate and Citric acid and mix well. 3. Mix the Polysorbate 80 with the Perfume and add to the formulation and mix well. 4. Finally, add the Nuosept® 44/Integra® 44 and the dye and mix well.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
40
Dishwasher detergent tablets 11040-100-1
Formulation Ingredients
% W/W
Supplier
A.
Sodium tripolyphosphate
39.200
Huntsman, Rhodia
Sodium carbonate
32.144
Aldrich
Sodium sulphate
18.914
Aldrich
Sodium metasilicate (Pentahydrate)
6.272
Huntsman, Rhodia
Sodium stearate (OP-100)
0.784
Huntsman, Rhodia
C13-15 fatty alcohol 7EO (C13-15)
0.686
Huntsman, Rhodia
2.000
ISP
B. Disintex™ 200 Total
100.000
Formulation instructions 1. Prepare base powder with ingredients listed above in stage A. 2. Mix base powder and Disintex™ 200 disintegrating agent in a V-mixer for 30 minutes. 3. Press mixed powder at 11 tons pressure using dry compression to make 20g tablets. (lab tabs were pressed using a Carver Automated Press at 387 psi and 1 sec. dwell time) 4. Individual tabs were tested by submerging in 3 liters of DI water agitated at 700 rpm until complete dissolution enabled tab granules to pass through a metal gauze cage.
Car shampoo 11678-10-26
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
87.890
Supplier
Sodium lauryl ether sulphate 70% paste (Texapon N70)
7.500
Cognis
Gantrez® S-97 BF solution (as supplied)
0.800
ISP
PVP K-90
1.500
ISP
Surfadone® LP-300
1.000
ISP
Triethanolamine (TEA)
0.600
Aldrich
Nuosept® 44/Integra® 44
0.400
ISP
Dye
0.100
Citric acid (solid)
0.100
Fisher
Polysorbate 80
0.070
A & E Connock Ltd
Perfume/Fragrance
0.040
As required
Total
100.000
Formulation instructions 1. Dissolve the Gantrez® S-97 BF into the water with mechanical mixing. 2. Neutralize Gantrez® S-97 BF with TEA. 3. Add PVP K-90 while mixing. Wait until it completely dissolves. 4. Add Sodium lauryl ether sulphate 70%, Surfadone® LP-300, and Citric acid one by one. Allow 3 minutes for each to be mixed. Add Dye solution (1%) into the mixture. 5. Premix Polysorbate 80 and Fragrance then add into the formulation. 6. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
41
Car wash and wax 11678-10-17
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
87.640
Sodium lauryl sulphate (20%) (Texapon K12P)
2.750
Supplier Cognis
Cerasynt® 945
2.500
ISP
Surfadone® LP-300
1.500
ISP
Paraffinum liquidum (Paraffin Light)
1.000
Merck/S. Black
Lauryl dimethyl amine oxide (Amphotenside DMOX)
1.000
Zschimmer & Schwarz
Nuosept® 44/Integra® 44
0.400
ISP
Polysorbate 80
0.130
A & E Connock Ltd.
Perfume/Fragrance
0.060
Citric acid (solid)
0.020
Fisher
Carnuaba wax 82.5°C - 86.0°C melting point
3.000
S. Black
Total
100.000
Formulation instructions 1. Add Sodium lauryl sulphate into water while mixing. 2. Add Lauryl dimethyl amine oxide and Surfadone® LP-300 and heat to 80°C while stirring. 3. Carnauba wax, Liquid paraffin and Cerasynt® 945 are heated to 80°C while mixing. 4. These are mixed together at 80°C then mixed 3 minutes. 5. Cool down formulation to room temperature while mixing. 6. Premix Polysorbate 80 and Fragrance then add into formulation. 7. Add Nuosept® 44/Integra® 44 and Citric acid to the formulation. Mix well.
Tire wax
11678-9-12
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
40.940
Paraffinum liquidum (Paraffin Light)
35.000
Merck/S. Black
Petroleum jelly (Vaseline)
15.000
Fisher
Antaron® V-220
3.000
ISP
Carnuba wax 82.5°C - 86.0°C melting point
3.000
Merck/S. Black
Polyglyceryl-3 Oleate
2.300
A & E Connock Ltd.
Nuosept® 44/Integra® 44
0.400
ISP
Polysorbate 80
0.260
A & E Connock Ltd.
Perfume/Fragrance
0.100 Total
Supplier
100.000
Formulation instructions 1. Carnauba wax, liquid paraffin, vaseline and Antaron® V-220 are heated to 80°C while mixing. 2. Polyglyceryl-3 Oleate added to the mix. 3. Add water and stir. 4. Premix Polysorbate 80 and Fragrance then add into formulation. 5. Add Nuosept® 44/Integra® 44.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
42
Wheel spray cleaner 11539-152-7
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
90.780
Isopropanol (IPA)
3.000
Supplier Fisher
Gantrez® 97 HSU solution (as supplied)
0.400
ISP
C12-C14/30 EO Na Sulfate (Disponil FES 77)
2.000
Cognis
Surfadone® LP-100
0.500
ISP
NEP® solvent
1.000
ISP
PVP K-30
1.000
ISP
Nuosept® 44/Integra® 44
0.400
ISP
Citric acid (solid)
0.300
Fisher
Sodium carbonate (NaCO3)
0.300
Fisher
Sodium hydroxide (NaOH 10% aq. solution)
0.220
Fisher
Polysorbate 80
0.070
A & E Connock Ltd.
Perfume/Fragrance
0.030 Total
100.000
Formulation instructions 1. Add Gantrez® 97 HSU into water. 2. Neutralize Gantrez® 97 HSU with NaOH 10%. 3. Add PVP K-30 while mixing. Wait until it completely dissolves. 4. Put Sodium carbonate, IPA, NEP, Sodium lauryl sulphate, Surfadone® LP-100 and Citric acid one by one, waiting each time for 3 minutes while mixing. 5. Premix Polysorbate 80 and Fragrance then add into formulation. 6. Add Nuosept® 44/Integra® 44.
Metal cleaner 11040-74-1
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
84.000
Phosphoric acid (85%)
12.000
Aldrich
NEP® solvent
4.000
ISP
Total
Supplier
100.000
Formulation instructions 1. Add acid to NEP® and water with continuous stirring. 2. A slight exothermic reaction will occur. 3. Mix all ingredients until you have a homogenous cleaner solution.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
43
Hard Surface Cleaner Dairy and brewery cleaner featuring Jaypol® M30 11678-119-5 Formulation Ingredients
% W/W
Supplier
Aqua/water (D.I. water)
72.250
Sodium hydroxide pellets
25.000
Fisher
Jaypol® M30
2.000
ISP
0.750
Thermphos
Amino trimethylene phosphonic acid (Dequest 2000) (ATMP) Total
100.000
Formulation instructions 1. Add the NaOH to the water and mix well. 2. Add the Jaypol® M30 and mix well followed by the ATMP.
Institutional all-purpose cleaner featuring Jaypol® S44 11678-144-8
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
91.730
Texapon N70 (sodium lauryl ether sulphate 70%)
2.500
Jaypol® S44
2.000
ISP
Sodium lauroyl sarcosinate (Protelan LS 9011)
1.250
Zschimmer & Schwarz
Lauryl dimethyl amine oxide (amphotenside DMOX)
1.250
Zschimmer & Schwarz
Hydroxyethylidene-1, 1-diphosphonic acid (HEDP)
0.500
Aldrich
Nuosept® 44/Integra® 44
0.400
ISP
Surfadone® LP-100
0.150
ISP
Sodium hydroxide (NaOH 50% Solution)
0.170
Fisher
Polysorbate 80
0.034
A & E Connock Ltd.
0.016
As required
Perfume/Fragrance Total
Supplier Cognis
100.000
Formulation instructions 1. Add all the other ingredients to the water except for the Fragrance, Polysorbate 80 and Nuosept® 44 or Integra® 44 in the order listed, stirring thoroughly after each addition to ensure each one has dissolved. 2. Adjust the pH with citric acid to 7.00. 3. Mix the Fragrance with Polysorbate 80. 4. Add the Nuosept® or Integra® 44 and the Fragrance mixture and mix well.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
44
Institutional grill cleaner featuring Jaypol® M30 11678-149-18
Formulation Ingredients
% W/W
Aqua/water (D.I. water)
72.400
Sodium metasilicate
8.300
Fisher
Texapon N70 (sodium lauryl ether sulphate)
5.000
Cognis
Sodium hydroxide (NaOH 50% solution)
4.500
Fisher
NEP® solvent
4.000
ISP
Plantacare 818 (Cocoglucoside)
3.000
Cognis
Jaypol® M30
2.000
ISP
Amino trimethylene phoshonic acid (Dequest 2000) (ATMP)
0.750
Thermphos
Polysorbate 80
0.034
A & E Connock Ltd.
0.016
As required
Perfume/Fragrance Total
Supplier
100.000
Formulation instructions 1. Add all the ingredients to the water except for the Fragrance and the Polysorbate 80 in the order listed, stirring thoroughly after each addition to ensure each one has dissolved. 2. Adjust the pH to 13.00 with the NaOH. 3. Mix the Fragrance with the Polysorbate 80, add to the formulation and mix well.
Institutional bathroom cleaner featuring Easy-Wet™ 20 and NEP® 11678-152-33 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
80.340
C12-C14 / 30 EO sodium sulfate (Disponil FES 77)
7.000
Cognis
Plantacare 818 (Cocoglucoside)
5.300
Cognis
Sulfamic acid
5.100
Fisher
NEP® solvent
2.000
ISP
Easy-Wet™ 20
0.150
ISP
Polysorbate 80
0.077
A & E Connock Ltd.
Perfume/Fragrance
0.033
As required
Total
Supplier
100.000
Formulation instructions 1. Mix the Sulfamic acid with the water. 2. Add the other ingredients except for the Fragrance and the Polysorbate 80 in the order listed, stirring thoroughly after each addition to ensure each one has dissolved. 3. Mix the Fragrance with the Polysorbate 80, add to the formulation and mix well.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
45
Laundry Institutional laundry alkali/builder booster featuring Jaypol® M30 11679-11-14 Formulation Ingredients
% W/W
Aqua/water (D.I. water)
51.030
Sodium hydroxide (NaOH 50% solution)
31.000
Potassium silicate
15.000
PQ
Jaypol® M30
2.200
ISP
0.770
Thermphos
ATMP Total
Supplier Fisher
100.000
Formulation instructions 1. Add all the ingredients to the water in the order listed, stirring thoroughly after each addition to ensure each one has dissolved.
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
46
™ Trademark registration applied for ® Registered trademark of the ISP group. © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USEOR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
47
Committed to your formulation ISP global R&D and technical service At ISP, we’re continually working on developing ideas and technology that will help your cleaning products stand out in the marketplace. Our global R&D network develops new chemistries for use in innovative cleaning products and develops applications technology targeted to meeting the changing needs of the marketplace. To support your product development efforts, ISP maintains a regional technical service group with locations in North America, Europe, the Middle East and Asia. Our experienced team can use their expertise with ISP chemistries to help you achieve your formulation goals.
For more information, contact us at:
[email protected]
North American Headquarters World Headquarters INTERNATIONAL SPECIALTY PRODUCTS 1361 Alps Road, Wayne, NJ 07470, USA Tel: +1 973 628-4000 Fax: +1 973 628-3311 ispcorp.com ∙
[email protected]
Customer Service Toll free: 1 (800) 622-4423 Fax: +1 973 628-4001
[email protected] Sample Center Toll free: 1 (800) 243-6788
[email protected]
European Headquarters Cologne, Germany Emil-Hoffmann-Strasse 1-a D-50996 Koln-Rodenkirchen Germany Telephone: +49 (2236) 9649-0
Customer Service Tel: +49 (2236) 9649-260 Fax: +49 (2236) 9649-295
™ Trademark registration applied for ® Registered trademark of the ISP group © International Specialty Products. 2011 Designed & Printed in USA. The foregoing information is accurate to the best of our knowledge and is offered as guide to formulators. No warranty is expressed or implied as to the results obtained from use of the formulation, procedure or products suggested herein, neither is any permission or recommendation to practice any invention covered by patent either expressed or implied. All users should test formulation stability, toxicology and microbiology. The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser must make its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products. Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’ conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make no warranty against infringement of any patents by reason of purchaser’s use of any information, product, method or apparatus described in this document.
ispcleaning.com
