GUIDE FORMULATIONS
The KCC Corporation is a family owned business founded in 1958 which employs over 4,600 people in 17 countries. The company is headquartered in Seoul, South Korea and are a global leader in coatings and speciality chemicals. KCC is a proud, relatively new entrant to the silicones industry, with functional siloxane ingredients designed to meet the ever growing global demands for safe, effective and environmentally sound technology, with a strong focus on the personal care sector.
KCC Beauty brings together under one brand an exciting range of raw materials for Personal Care, based on the combined strengths of both KCC Silicones and Basildon Chemicals. With personal care manufacturing and technical service centres in Korea and the UK, and a new plant in China; KCC Beauty is well positioned to meet our customers’ increasing needs for innovative technology and formulation support.
Basildon Chemicals is a UK based specialist manufacturer and formulator of silicone emulsions and silicone compounds for the personal care sector. Established in 1971, they are renowned as a company with a history of excellence in the emulsification of silicones. In April 2011, Basildon Chemicals was purchased by the KCC Corporation and, to this day, continue their focus on the consumer markets of food, pharmaceuticals and personal care.
Guide Formulation Hair Care
Guide Formulation Hair Care
One of our newest materials, SeraShine® SQ 41 (Silicone Quaternium-8), allows for crystal clear shampoos, with superior condition ing properties. SeraShin e® SQ 41 is a 40% active, water-soluble polymer that will not degrade foam, and is e ffective at low addition levels. It improves wet combing and detangling, leaving hair feeling and looking healthy.
SeraShine® EM 503 (Dimethicone (and) Cocamidopropyl Betaine (and) Laureth-3 (and) Guar Hydroxypropyltrimonium Chloride) is a high-active silicone emulsion with a large particle size. It is ideal for coarse and frizzy hair where high conditioning is required, as it has an impressive smoothingeffect.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Deionised Water
To 100
-
Vehicle
Aqua (Water)
To 100
-
Vehicle
Disodium EDTA
0.05
Disodium EDTA/Various
Chelating Agent
Glycerin
1.00
Surfac G995V/Surfachem
Humectant
Glycerin
1.00
Surfac G995V/Surfachem
Humectant
Hydroxyethylcellulose
0.50
Natrosol 250 HHR�PC/Ashland
Thickener
Polyquaternium-10
0.20
Celquat SC 230M/Azelis (Akzo Nobel)
Conditioning/ DepositionAgent
Stearamidopropyl Dimethylamine
1.00
Incromine SD/Croda
Conditioning Fat
S od ium L aure th Sul fate
2 9.0 0
Ste ol CS�2 30 KE /Su rfach em (Stepan)
Anionic Surfactant
Citric Acid
0.50
Surfac Citric Acid Monohydrate BP/Surfachem
pH Adjuster
S od ium L au ryl S ul fate
17.0 0
Ste pano l WA� Ext ra-E /Surfac he m (Stepan)
Anionic Surfactant
Cetyl Alcohol
3.00
Crodacol C90/Croda
Bodifying Fat
Stearyl Alcohol
3.00
Crodacol S95/Croda
Bodifying Fat
Behentrimonium Chloride (and) Isopropyl Alcohol
0. 50
I nc ro quat Be he nyl TMC� 85 / Croda
Conditioning Fat
Mangifera Indica (Mango) Seed Butter
0. 50
S eato ns Re fin ed Ma ngo But te r/ Seatons
Moisturising
Dimethicone(and) Cocamidopropyl Betaine (and) Laureth-3 (and) Guar Hydroxytrimonium Chloride
3.08
SeraShine® EM 503/KCC Beauty
ConditioningAgent
Cocamidopropyl Betaine
7.07
Surfac B4/Surfachem
Amphoteric Surfactant
SodiumBenzoate
0.3 0
Surfac SodiumBenzoate BP/ Surfachem
Preservative
Silicone Quaternium-8
0.75
SeraSense® SQ 41/KCC B eauty
Conditioning Agent
Hydrolysed Algin (and) Chlorella Vulgaris (and) Maris Aqua
0.5 0
Pheohydrane/Protec Ingredia (Codif)
Hydrating
Citric Acid
0.21
Surfac Citric Acid Mono BP/ Surfachem
pH Adjuster
Parfum (Fragrance)
0.40
Mango Blast Fragrance/ Givaudan
Fragrance
Parfum (Fragrance)
0.50
Mango Blast Fragrance/Givaudan
Fragrance
1.00
Euxyl K700/Schülke
Preservative
Sodium Chloride
0.88
Sodium Chloride PVD/British Salt
Viscosity Adjuster
Phenoxyethanol (and) Benzyl Alcohol (and) Potassium Sorbate (and) Aqua (And) Tocopheryl
Appearance: Clear, viscous liquid Viscosity @ 25°C: 4000 – 7000cP (Brookfield RVT, Sp3, 10rpm) pH @ 25°C: 4.5 – 4.8
• • • •
Add the water to the vessel. Premix the glycerin and Celquat. Add to the batch and stir until fully dispersed. Add the rest of the ingredients in order, stirring well between additions. Check pH and viscosity and adjust if necessary.
Appearance: Opaque, white emulsion Viscosity @ 25°C: 10000 – 20000cPs (Brookfield Helipath, T Bar C,10rpm) pH @ 25°C: 3.5 – 4.5
• Add the water to the vessel and begin to heat. • Premix the glycerin and hydroxyethylcellulose, add to the water and stir until thickened. Continue to heat to 80 – 85°C. • Add the Incromine and citric acid. • In a separate vessel, heat the Crodacols, Incroquat and Mango Butter until molten. Wh en both phases reach 80 – 85°C, transfer the fats to the water phase. Homogenise for 5 minutes at 3000rpm. • Transfer back to a paddle stirrer and cool to below 40°C. • Add the remaining ingredients in order.
Guide Formulation Hair Care
Guide Formulation Hair Care
One of our newest materials, SeraShine® SQ 41 (Silicone Quaternium-8), allows for crystal clear shampoos, with superior condition ing properties. SeraShin e® SQ 41 is a 40% active, water-soluble polymer that will not degrade foam, and is e ffective at low addition levels. It improves wet combing and detangling, leaving hair feeling and looking healthy.
SeraShine® EM 503 (Dimethicone (and) Cocamidopropyl Betaine (and) Laureth-3 (and) Guar Hydroxypropyltrimonium Chloride) is a high-active silicone emulsion with a large particle size. It is ideal for coarse and frizzy hair where high conditioning is required, as it has an impressive smoothingeffect.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Deionised Water
To 100
-
Vehicle
Aqua (Water)
To 100
-
Vehicle
Disodium EDTA
0.05
Disodium EDTA/Various
Chelating Agent
Glycerin
1.00
Surfac G995V/Surfachem
Humectant
Glycerin
1.00
Surfac G995V/Surfachem
Humectant
Hydroxyethylcellulose
0.50
Natrosol 250 HHR�PC/Ashland
Thickener
Polyquaternium-10
0.20
Celquat SC 230M/Azelis (Akzo Nobel)
Conditioning/ DepositionAgent
Stearamidopropyl Dimethylamine
1.00
Incromine SD/Croda
Conditioning Fat
S od ium L aure th Sul fate
2 9.0 0
Ste ol CS�2 30 KE /Su rfach em (Stepan)
Anionic Surfactant
Citric Acid
0.50
Surfac Citric Acid Monohydrate BP/Surfachem
pH Adjuster
S od ium L au ryl S ul fate
17.0 0
Ste pano l WA� Ext ra-E /Surfac he m (Stepan)
Anionic Surfactant
Cetyl Alcohol
3.00
Crodacol C90/Croda
Bodifying Fat
Cocamidopropyl Betaine
7.07
Surfac B4/Surfachem
Amphoteric Surfactant
SodiumBenzoate
0.3 0
Surfac SodiumBenzoate BP/ Surfachem
Preservative
Silicone Quaternium-8
0.75
SeraSense® SQ 41/KCC B eauty
Conditioning Agent
Hydrolysed Algin (and) Chlorella Vulgaris (and) Maris Aqua
0.5 0
Pheohydrane/Protec Ingredia (Codif)
Hydrating
Citric Acid
0.21
Surfac Citric Acid Mono BP/ Surfachem
Parfum (Fragrance)
0.50
Sodium Chloride
0.88
Stearyl Alcohol
3.00
Crodacol S95/Croda
Bodifying Fat
Behentrimonium Chloride (and) Isopropyl Alcohol
0. 50
I nc ro quat Be he nyl TMC� 85 / Croda
Conditioning Fat
Mangifera Indica (Mango) Seed Butter
0. 50
S eato ns Re fin ed Ma ngo But te r/ Seatons
Moisturising
Dimethicone(and) Cocamidopropyl Betaine (and) Laureth-3 (and) Guar Hydroxytrimonium Chloride
3.08
SeraShine® EM 503/KCC Beauty
ConditioningAgent
pH Adjuster
Parfum (Fragrance)
0.40
Mango Blast Fragrance/ Givaudan
Fragrance
Mango Blast Fragrance/Givaudan
Fragrance
Euxyl K700/Schülke
Preservative
Viscosity Adjuster
Phenoxyethanol (and) Benzyl Alcohol (and) Potassium Sorbate (and) Aqua (And) Tocopheryl
1.00
Sodium Chloride PVD/British Salt
Appearance: Clear, viscous liquid Viscosity @ 25°C: 4000 – 7000cP (Brookfield RVT, Sp3, 10rpm) pH @ 25°C: 4.5 – 4.8
• • • •
Appearance: Opaque, white emulsion Viscosity @ 25°C: 10000 – 20000cPs (Brookfield Helipath, T Bar C,10rpm) pH @ 25°C: 3.5 – 4.5
Add the water to the vessel. Premix the glycerin and Celquat. Add to the batch and stir until fully dispersed. Add the rest of the ingredients in order, stirring well between additions. Check pH and viscosity and adjust if necessary.
• Add the water to the vessel and begin to heat. • Premix the glycerin and hydroxyethylcellulose, add to the water and stir until thickened. Continue to heat to 80 – 85°C. • Add the Incromine and citric acid. • In a separate vessel, heat the Crodacols, Incroquat and Mango Butter until molten. Wh en both phases reach 80 – 85°C, transfer the fats to the water phase. Homogenise for 5 minutes at 3000rpm. • Transfer back to a paddle stirrer and cool to below 40°C. • Add the remaining ingredients in order.
Guide Formulation Hair Care
Guide Formulation Hair Care
SeraShine® EM 501C (Phenyl Trimethicone (and) Silicone Quaternium-17 (and) Laureth-4) is a microemulsion of fine particle size which allows clear shampoos. Phenyl Trimethicone is deposited onto the hair to add gloss. Silicone Quaterniu m-17is substantive to damaged hair, giving conditioning where it is needed most.
Co-Washes are popular for Ethnic hair types, as they are gentler than traditional shampoos and do not strip the hair of natural oils. This product is designed for use once or twice a week, in place of a shampoo. SeraSens e® SF CM56 (Cyclopentasiloxane (and) Cyclohexasi loxane) allows the conditioner to spread easily through the hair. SeraShine® EM 505 (Amodimethicone (and) Dimethicone (and) Laureth-23 (and) Laureth-6) has a large particle size, providing even the coarsest hair with superior conditioning.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Glycerin
1.00
Surfac G995V/Surfachem
Dispersing Agent
Polyquaternium-10
0.2 0
Celquat SC�230M/Azelis (Akzo Nobel)
Conditioning/ Silicone Deposition Aid
Sodium Laureth Sulfate
2 5.00
Steol CS 230 KE/Surfachem (Stepan)
Anionic Surfactant
Sodium L auryl S ulfate
15.00
Stepanol WA�Extra-E/Surfachem (Stepan)
Anionic Surfactant
Cetyl Alcohol
3.00
Crodacol C90/Croda
Bodifying Fat
Cetearyl Alcohol
2.00
Crodacol CS90/Croda
Bodifying Fat
Bis-(Ethyl PPG�3 Behenate) Dimonium Methosulfate (and) Behenamidopropyl Dimethylamine
2.00
Terraquat BD/Croda
Conditioning Fat
Acrylates Copolymer
5.00
Carbopol Aqua SF�1/Surfachem (Lubrizol)
Suspending Agent
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Glycerin
1.00
Surfac G995V/Surfachem
Humectant
Hydroxyethylcellulose
0.50
Natrosol 250 HHR�PC/Ashland
Thickener
Citric Acid
0.60
Surfac Citric Acid Monohydrate BP/Surfachem
pH Adjuster
Cocamidopropyl Betaine
6.00
Surfac B4/Surfachem
Amphoteric Surfactant
Sodium Hydroxide
0.57
Sodium Hydroxide 32% Liquor/ Univar
pH Adjuster
Cyclopentasiloxane (and) Cyclohexasiloxane
2.00
SeraSense® SF CM56/KCC Beauty
ConditioningAgent
Phenyl Trimethicone (and) SiliconeQuaternium-17(and) Laureth-4
5.00
SeraShine®EM 501C/KCC Beauty
Conditioning Agent
Amodimethicone(and) Dimethicone(and)Laureth-23 (and) Laureth-6
3.0 0
SeraShine® EM 505/KCC Beauty
ConditioningAgent
Parfum (Fragrance)
0.50
Mango Blast Fragrance/Givaudan
Fragrance
Olea Europaea (Olive) Fruit Oil
0.2 5
1.00
Euxyl K700/Schülke
Preservative
Seatons Olive Pomace Oil/ Seatons
Moisturising
Phenoxyethanol (and) Benzyl Alcohol (and) Potassium Sorbate (and) Aqua (and) Tocopheryl
Parfum (Fragrance)
0.40
Mango Blast Fragrance/ Givaudan
Fragrance
Euxyl K700/Schülke
Preservative
0.0 7
Colorona MP�24 Karat Gold/Azelis (Merck)
Aesthetics
Citric Acid
0.07
Surfac Citric Acid Mono BP/ Surfachem
pH Adjuster
Phenoxyethanol (and) Benzyl Alcohol (and) Potassium Sorbate (and) Aqua (And) Tocopheryl
1.00
Mica (and) CI 77891 (and) CI 77491 (and) Dimethicone
Sodium Chloride
2.50
Sodium Chloride PVD/British Salt
Thickener
Appearance: Clear, viscous liquid with glitter Viscosity @ 25°C: 4000 – 7000cP (Brookfield RVT, Sp3, 10rpm) pH @ 25°C: 5.5 – 6.5
• Add the water to the vessel and begin stirring. • Premix the glycerin and the Celquat. Add to the batch and stir until dispersed. • Add the surfactants and Carbopol. Adjust the pH to 6.50 – 7.50 with NaOH aer addition of the Carbopol. • Add the rest of the ingredients in order, stirring well between additions. • Check pH and viscosity and adjust as necessary.
Appearance: Opaque, white emulsion Viscosity @ 25°C: 10000 – 20000cPs (Brookfield Helipath, T Bar C,10rpm) pH @ 25°C: 2.5 – 3.5
• Add the water to the vessel and begin to heat. • Premix the glycerin and hydroxyethylcellulose, add to the water and stir until thickened. Continue to heat to 80 – 85°C. Add the citric acid. • In a separate vessel, heat the Crodacols and Terraquat until molten. When both phases reach 80 – 85°C, transfer the fats to the water phase. Homogenise for 5 minutes at 3000rpm. • Cool to below 40°C and add the remaining ingredients in order.
Guide Formulation Hair Care
Guide Formulation Hair Care
SeraShine® EM 501C (Phenyl Trimethicone (and) Silicone Quaternium-17 (and) Laureth-4) is a microemulsion of fine particle size which allows clear shampoos. Phenyl Trimethicone is deposited onto the hair to add gloss. Silicone Quaterniu m-17is substantive to damaged hair, giving conditioning where it is needed most.
Co-Washes are popular for Ethnic hair types, as they are gentler than traditional shampoos and do not strip the hair of natural oils. This product is designed for use once or twice a week, in place of a shampoo. SeraSens e® SF CM56 (Cyclopentasiloxane (and) Cyclohexasi loxane) allows the conditioner to spread easily through the hair. SeraShine® EM 505 (Amodimethicone (and) Dimethicone (and) Laureth-23 (and) Laureth-6) has a large particle size, providing even the coarsest hair with superior conditioning.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Glycerin
1.00
Surfac G995V/Surfachem
Dispersing Agent
Polyquaternium-10
0.2 0
Celquat SC�230M/Azelis (Akzo Nobel)
Conditioning/ Silicone Deposition Aid
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Glycerin
1.00
Surfac G995V/Surfachem
Humectant
Hydroxyethylcellulose
0.50
Natrosol 250 HHR�PC/Ashland
Thickener
0.60
Surfac Citric Acid Monohydrate BP/Surfachem
pH Adjuster
Sodium Laureth Sulfate
2 5.00
Steol CS 230 KE/Surfachem (Stepan)
Anionic Surfactant
Citric Acid
Sodium L auryl S ulfate
15.00
Stepanol WA�Extra-E/Surfachem (Stepan)
Anionic Surfactant
Cetyl Alcohol
3.00
Crodacol C90/Croda
Bodifying Fat
Cetearyl Alcohol
2.00
Crodacol CS90/Croda
Bodifying Fat
Bis-(Ethyl PPG�3 Behenate) Dimonium Methosulfate (and) Behenamidopropyl Dimethylamine
2.00
Terraquat BD/Croda
Conditioning Fat
Acrylates Copolymer
5.00
Carbopol Aqua SF�1/Surfachem (Lubrizol)
Suspending Agent
Cocamidopropyl Betaine
6.00
Surfac B4/Surfachem
Amphoteric Surfactant
Sodium Hydroxide
0.57
Sodium Hydroxide 32% Liquor/ Univar
pH Adjuster
Cyclopentasiloxane (and) Cyclohexasiloxane
2.00
SeraSense® SF CM56/KCC Beauty
ConditioningAgent
Phenyl Trimethicone (and) SiliconeQuaternium-17(and) Laureth-4
5.00
SeraShine®EM 501C/KCC Beauty
Conditioning Agent
Amodimethicone(and) Dimethicone(and)Laureth-23 (and) Laureth-6
3.0 0
SeraShine® EM 505/KCC Beauty
ConditioningAgent
Parfum (Fragrance)
0.50
Mango Blast Fragrance/Givaudan
Fragrance
Olea Europaea (Olive) Fruit Oil
0.2 5
1.00
Euxyl K700/Schülke
Preservative
Seatons Olive Pomace Oil/ Seatons
Moisturising
Phenoxyethanol (and) Benzyl Alcohol (and) Potassium Sorbate (and) Aqua (and) Tocopheryl
Parfum (Fragrance)
0.40
Mango Blast Fragrance/ Givaudan
Fragrance
Euxyl K700/Schülke
Preservative
0.0 7
Colorona MP�24 Karat Gold/Azelis (Merck)
Aesthetics
Citric Acid
0.07
Surfac Citric Acid Mono BP/ Surfachem
pH Adjuster
Phenoxyethanol (and) Benzyl Alcohol (and) Potassium Sorbate (and) Aqua (And) Tocopheryl
1.00
Mica (and) CI 77891 (and) CI 77491 (and) Dimethicone
Sodium Chloride
2.50
Sodium Chloride PVD/British Salt
Thickener
Appearance: Clear, viscous liquid with glitter Viscosity @ 25°C: 4000 – 7000cP (Brookfield RVT, Sp3, 10rpm) pH @ 25°C: 5.5 – 6.5
• Add the water to the vessel and begin stirring. • Premix the glycerin and the Celquat. Add to the batch and stir until dispersed. • Add the surfactants and Carbopol. Adjust the pH to 6.50 – 7.50 with NaOH aer addition of the Carbopol. • Add the rest of the ingredients in order, stirring well between additions. • Check pH and viscosity and adjust as necessary.
Appearance: Opaque, white emulsion Viscosity @ 25°C: 10000 – 20000cPs (Brookfield Helipath, T Bar C,10rpm) pH @ 25°C: 2.5 – 3.5
• Add the water to the vessel and begin to heat. • Premix the glycerin and hydroxyethylcellulose, add to the water and stir until thickened. Continue to heat to 80 – 85°C. Add the citric acid. • In a separate vessel, heat the Crodacols and Terraquat until molten. When both phases reach 80 – 85°C, transfer the fats to the water phase. Homogenise for 5 minutes at 3000rpm. • Cool to below 40°C and add the remaining ingredients in order.
Guide Formulation Hair Care
Guide Formulation Hair Care
The combination of silicones in this lightweight serum allows easy absorption into the hair. SeraSense® SF PTM (Phenyl Trimethicone) adds shine, and SeraSense® SA 30 (Amodimethicone) is highly substantive, protecting the hair from heat damage. S eraSense® RB 21 (Dimethicone (and) Trimethylsiloxysilicate) is a resin blend with impressive anti-frizz properties.
Weightless Hair Oil contains an expert blend of silicones and coconut oil to provide the soest, shinie st hair imaginable, without feeling heavy or greasy. SeraS ense® RB 21 (Dimethicone (and) Trimethylsiloxysilicate) tames frizz and soothes dryness. SeraSens e® SF DDM (Diphenyl Dimethicone) has a high refractive index, resulting in glossy tresses. SeraSens e® SF CPM (Caprylyl Methicone) has a super-light feel and excellent compatibility with natural oils. This product has been specially formulated so it can be used three ways - on dry hair as a pre-shampoo treatment, or on both wet and dry hair post wash as a serum.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Dimethicone
To 100
SeraSense® SF 1/KCC Beauty
Solvent
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Cyclopentasiloxane (and) Dimethiconol
50.00
SeraSense® GB 10/KCC Beauty
Smoothes Hair
Dimethicone
To 100
SeraSense® SF 2/KCC Beauty
Solvent
Phenyl Trimethicone
3.00
SeraSense® SF PTM/KCC Beauty
Glossing Agent
Amodimethicone
2.00
SeraSense® SA 30/KCC Beauty
Heat Protection
Dimethicone(and) Trimethylsiloxysilicate
3.0 0
SeraSense® RB 21/KCCBeauty
Anti-Frizz Agent
Argania Spinosa (Argan) Kernal Oil
1.00
Argan Oil/OLVEA
Hair Moisturising Oil
Tocopheryl Acetate
0.10
Various
Conditioning
q.s.
-
Fragrance
Phase A
Phase B Parfum (Fragrance)
Appearance: Clear, viscous liquid Viscosity @ 25°C: 500 – 700cP (Brookfield LVDV II, LV�2, 6rpm) pH @ 25°C: n/a
• Mix the ingredients of Phase A until homogenous. • Add Phase B.
Cocos Nucifera
5.00
Seatons Coconut Oil/Seatons
Moisturising Agent
Dimethicone(and) Dimethiconol
14.00
SeraSense®GB 16/KCC Beauty
Conditioning Agent
Dimethicone(and) Trimethylsiloxysilicate
5.0 0
S eraS en se® R B2 1/ KCC B eau ty
An ti -Fri zz A ge nt
D ip henyl Di me thi con e
3.00
S eraS en se® SF DDM /KCC B eaut y
G los si ng Age nt
Caprylyl Methicone
10.00
SeraSens e® SF CPM/KCC Beauty
Improves Organic Compatibility
Cucumis Sativus (Cucumber) Seed Oil
2.0 0
Seatons Cucumbe r Oil/Seatons
Moistu rising Age nt
Moringa Pterygosperma (Moringa) Seed Oil
2.00
Seatons Moringa Oil/Seatons
Moisturising Agent
Ethylhexylmethoxycinnamate
0.20
Various
UV Absorber
Parfum (Fragrance)
0.20
Mango Blast Fragrance/Givaudan
Fragrance
Appearance: Clear, pale yellow liquid Viscosity @ 25°C: n/a pH @ 25°C: n/a
• Add the coconut oil. Thi s may need to be heated gently to liquefy. • Add the rest of the ingredients in order, nishingwith the SeraSense ® SF 2.
Guide Formulation Hair Care
Guide Formulation Hair Care
The combination of silicones in this lightweight serum allows easy absorption into the hair. SeraSense® SF PTM (Phenyl Trimethicone) adds shine, and SeraSense® SA 30 (Amodimethicone) is highly substantive, protecting the hair from heat damage. S eraSense® RB 21 (Dimethicone (and) Trimethylsiloxysilicate) is a resin blend with impressive anti-frizz properties.
Weightless Hair Oil contains an expert blend of silicones and coconut oil to provide the soest, shinie st hair imaginable, without feeling heavy or greasy. SeraS ense® RB 21 (Dimethicone (and) Trimethylsiloxysilicate) tames frizz and soothes dryness. SeraSens e® SF DDM (Diphenyl Dimethicone) has a high refractive index, resulting in glossy tresses. SeraSens e® SF CPM (Caprylyl Methicone) has a super-light feel and excellent compatibility with natural oils. This product has been specially formulated so it can be used three ways - on dry hair as a pre-shampoo treatment, or on both wet and dry hair post wash as a serum.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
To 100
SeraSense® SF 1/KCC Beauty
Solvent
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Dimethicone
To 100
SeraSense® SF 2/KCC Beauty
Solvent
Cocos Nucifera
5.00
Seatons Coconut Oil/Seatons
Moisturising Agent
Dimethicone(and) Dimethiconol
14.00
SeraSense®GB 16/KCC Beauty
Conditioning Agent
Dimethicone(and) Trimethylsiloxysilicate
5.0 0
S eraS en se® R B2 1/ KCC B eau ty
An ti -Fri zz A ge nt
D ip henyl Di me thi con e
3.00
S eraS en se® SF DDM /KCC B eaut y
G los si ng Age nt
Caprylyl Methicone
10.00
SeraSens e® SF CPM/KCC Beauty
Improves Organic Compatibility
Cucumis Sativus (Cucumber) Seed Oil
2.0 0
Seatons Cucumbe r Oil/Seatons
Moistu rising Age nt
Moringa Pterygosperma (Moringa) Seed Oil
2.00
Seatons Moringa Oil/Seatons
Moisturising Agent
Ethylhexylmethoxycinnamate
0.20
Various
UV Absorber
Parfum (Fragrance)
0.20
Mango Blast Fragrance/Givaudan
Fragrance
Phase A Dimethicone Cyclopentasiloxane (and) Dimethiconol
50.00
SeraSense® GB 10/KCC Beauty
Smoothes Hair
Phenyl Trimethicone
3.00
SeraSense® SF PTM/KCC Beauty
Glossing Agent
Amodimethicone
2.00
SeraSense® SA 30/KCC Beauty
Heat Protection
Dimethicone(and) Trimethylsiloxysilicate
3.0 0
SeraSense® RB 21/KCCBeauty
Anti-Frizz Agent
Argania Spinosa (Argan) Kernal Oil
1.00
Argan Oil/OLVEA
Hair Moisturising Oil
Tocopheryl Acetate
0.10
Various
Conditioning
q.s.
-
Fragrance
Phase B Parfum (Fragrance)
Appearance: Clear, viscous liquid Viscosity @ 25°C: 500 – 700cP (Brookfield LVDV II, LV�2, 6rpm) pH @ 25°C: n/a
Appearance: Clear, pale yellow liquid Viscosity @ 25°C: n/a pH @ 25°C: n/a
• Mix the ingredients of Phase A until homogenous. • Add Phase B.
• Add the coconut oil. Thi s may need to be heated gently to liquefy. • Add the rest of the ingredients in order, nishingwith the SeraSense ® SF 2.
Guide Formulation Hair Care
Guide Formulation Skin Care
This leave-in spray conditioner will leave the hair conditioned and protected from heat, due to the addition of SeraShine® EM 401C (Si licone Quaternium-17 (and) C11�15 Pareth-5 (and) C11�15 Pareth-9). SeraSol® SC 85 (PEG�11 Methyl Ether Dimethicone) also conditions by detangling and reducing static. This formulation can also be used on dry hair as a light finishing product.
This face mask gently cleanses and detoxies the ski n. SeraSo® SW 72 (Bis-PEG18 Methyl Ether Dimethyl Silane) melts on contact with skin at 32°C, leaving it silky so. In addition to this, the SeraSense® materials facilitate spreading and give lubricity to the skin. Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Magnesium Aluminium Silicate or Bentonite
8.00
Optigel CL�PC/Azelis (Rockwood)
Thickener
Humectant
Se ra So l® SC 85/ KCC Be aut y
C on di ti on in g Ag ent
Glycerin
5.00
Surfac G995V/Surfachem
Humectant
Ceteareth-20
3.00
Brij CS20/Croda
O/W Co-Emulsifier
5.00
SeraShine® EM 401C/KCC Beauty
ConditioningAgent
3.00
Duraquench IQ/Croda
Long-Lasting Moisturisation
Cetrimonium Chloride
3.00
Incroquat CTC�30/Croda
Conditioning Agent
Sodium Benzoate
0.30
Surfac Sodium Benzoate BP/ Surfachem
Preservative
Cetyl Alcohol (and) Isostearyl Isostearate (and) Potassium Cetyl Phosphate (and) Cetyl Behenate (and) Behenic Acid Bis-PEG�18 Methyl Ether DimethylSilane
2.00
SeraSof® SW 72/KCC Beauty
Smoothing
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To100
-
Vehicle
Glycerin
1.00
Surfac G995V/Surfachem
PEG�11 Methyl Ether Dimethicone
1 .00
SiliconeQuaternium-17(and) C11�15 Pareth-5 (and) C11�15 Pareth-9
Citric Acid
0.20
Surfac Citric Acid Mono BP/ Surfachem
pH Adjuster
Parfum (Fragrance)
0.05
Mango Blast Fragrance/ Givaudan
Fragrance
Appearance: Clear, colourless water-thin liquid Viscosity @ 25°C: n/a pH @ 25°C: 4.2 – 4.8
• Add the water to the vessel. • Add the remaining ingredients in order, stirring well between additions . • Check the pH and adjust if necessary.
Cetyl Alcohol
4.00
Crodacol C90/Croda
Viscosity Booster
Garcinia Indica (Kokum) Seed Butter
0.50
Seatons Refined Kokum Butter/Seatons
Emollient/Protective
Cyclopentasiloxane (and) Dimethicone
5.00
SeraSense® GB 11/KCC Beauty
Skin Feel
Dimethicone
2.00
SeraSense® SF 5/KCC Beauty
Skin Feel
Parfum (Fragrance)
0.20
Vitamin 248 Fragrance/ Givaudan
Fragrance
Kaolin
10.00
BeraClay Amazonian White Clay/Azelis (Beraca)
Purifying
Phenoxyethanol (and) Ethylhexylglycerin
1.00
Euxyl PE 9010/Schülke
Preservative
Alcohol Denat.
10.00
DEB 96%/Tennants
Drying Agent
Citric Acid
0.40
Surfac Citric Acid Monohydrate/Surfachem
pH Adjuster
Appearance: Opaque, light brown paste Viscosity @ 25°C: >100000cP (Brookfield Helipath, T Bar F, 6rpm) pH @ 25°C: 5.5 – 6.5
• • • • •
Add the water to the vessel and begin stirring. Sprinkle in the Optigel and heat to 7080°C. Melt the waxes to 80°C and add to the water phase. Homogenise until smooth. Place back on the stirrer and cool. Once cooled (<40°C), add the rest of the ingredients.
Guide Formulation Hair Care
Guide Formulation Skin Care
This leave-in spray conditioner will leave the hair conditioned and protected from heat, due to the addition of SeraShine® EM 401C (Si licone Quaternium-17 (and) C11�15 Pareth-5 (and) C11�15 Pareth-9). SeraSol® SC 85 (PEG�11 Methyl Ether Dimethicone) also conditions by detangling and reducing static. This formulation can also be used on dry hair as a light finishing product.
This face mask gently cleanses and detoxies the ski n. SeraSo® SW 72 (Bis-PEG18 Methyl Ether Dimethyl Silane) melts on contact with skin at 32°C, leaving it silky so. In addition to this, the SeraSense® materials facilitate spreading and give lubricity to the skin. Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Magnesium Aluminium Silicate or Bentonite
8.00
Optigel CL�PC/Azelis (Rockwood)
Thickener
Humectant C on di ti on in g Ag ent
Glycerin
5.00
Surfac G995V/Surfachem
Humectant
Ceteareth-20
3.00
Brij CS20/Croda
O/W Co-Emulsifier
Cetyl Alcohol (and) Isostearyl Isostearate (and) Potassium Cetyl Phosphate (and) Cetyl Behenate (and) Behenic Acid
3.00
Duraquench IQ/Croda
Long-Lasting Moisturisation
Bis-PEG�18 Methyl Ether DimethylSilane
2.00
SeraSof® SW 72/KCC Beauty
Smoothing
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To100
-
Vehicle
Glycerin
1.00
Surfac G995V/Surfachem
PEG�11 Methyl Ether Dimethicone
1 .00
Se ra So l® SC 85/ KCC Be aut y
SiliconeQuaternium-17(and) C11�15 Pareth-5 (and) C11�15 Pareth-9
5.00
SeraShine® EM 401C/KCC Beauty
ConditioningAgent
Cetrimonium Chloride
3.00
Incroquat CTC�30/Croda
Conditioning Agent
Sodium Benzoate
0.30
Surfac Sodium Benzoate BP/ Surfachem
Preservative
Surfac Citric Acid Mono BP/ Surfachem
pH Adjuster
Citric Acid Parfum (Fragrance)
0.20 0.05
Mango Blast Fragrance/ Givaudan
Fragrance
Appearance: Clear, colourless water-thin liquid Viscosity @ 25°C: n/a pH @ 25°C: 4.2 – 4.8
• Add the water to the vessel. • Add the remaining ingredients in order, stirring well between additions . • Check the pH and adjust if necessary.
Cetyl Alcohol
4.00
Crodacol C90/Croda
Viscosity Booster
Garcinia Indica (Kokum) Seed Butter
0.50
Seatons Refined Kokum Butter/Seatons
Emollient/Protective
Cyclopentasiloxane (and) Dimethicone
5.00
SeraSense® GB 11/KCC Beauty
Skin Feel
Dimethicone
2.00
SeraSense® SF 5/KCC Beauty
Skin Feel
Parfum (Fragrance)
0.20
Vitamin 248 Fragrance/ Givaudan
Fragrance
Kaolin
10.00
BeraClay Amazonian White Clay/Azelis (Beraca)
Purifying
Phenoxyethanol (and) Ethylhexylglycerin
1.00
Euxyl PE 9010/Schülke
Preservative
Alcohol Denat.
10.00
DEB 96%/Tennants
Drying Agent
Citric Acid
0.40
Surfac Citric Acid Monohydrate/Surfachem
pH Adjuster
Appearance: Opaque, light brown paste Viscosity @ 25°C: >100000cP (Brookfield Helipath, T Bar F, 6rpm) pH @ 25°C: 5.5 – 6.5
• • • • •
Add the water to the vessel and begin stirring. Sprinkle in the Optigel and heat to 7080°C. Melt the waxes to 80°C and add to the water phase. Homogenise until smooth. Place back on the stirrer and cool. Once cooled (<40°C), add the rest of the ingredients.
Guide Formulation Hair Care/Skin Care
Guide Formulation Skin Care
Sparkling Oil Gel is a refractive index matched formulation of both oil and water. SeraSol® SC 81 (PEG�12 Dimethicone) is an emulsifier and humectant. S eraSense® GB 10 (Cyclopentasiloxane (and) Dimethiconol) gives long lasting moisturisation to thirsty skin and hair. This product can be used on wet or dry skin, or as a serum for hair.
This oil and alcohol-free formulation gives a cool feeling to skin. SeraSense® EM 61 (Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer) smoothes the skin, without feeling tacky, also reducing pore size. SeraSo® SW 72 (Bis –PEG18 Methyl Ether Dimethyl Silane ) is a so wax which melts on contact with skin to leave a silky so feel.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Phase A Aqua (Water)
15.28
-
Vehicle
PEG�12 Dimethicone
0.50
SeraSol® SC 81/KCC Beauty
Humectant
Propanediol
47.00
Zemea/IMCD (Dupont)
Humectant
Glycerin
14.90
Surfac G995V/Surfachem
Humectant
Citric Acid
0.11
Surfac Citric Acid Mono BP/ Surfachem
pH Adjuster
Phenoxyethanol (and) Benzyl Alcohol (and) Potassium Sorbate (and) Aqua (and) Tocopheryl
1.00
Euxyl K700/Schülke
Preservative
Phase B Sodium Acrylate (and) Sodium Acryloyldimethyl Taurate Copolymer (and) Isohexadecane (and) Polysorbate 80
4.00
Cyclopentasiloxane (and) Dimethiconol
10.00
SeraSense® GB 10/KCC Beauty
Moisturising
Isononyl Isononanoate
4.00
Lanol 99/Seppic
Emollient
Pyrus Malus(Apple) Se ed Oil
3.0 0
Seatons Alpine Apple See d Oil/ Seatons
Moisturising
Parfum (Fragrance)
0.10
Vitamin 248 Fragrance/ Givaudan
Fragrance
Simulgel EG/Seppic
Thickener
D is co V HT He x0.0 06 /Az el is
Ae sth eti cs
Phase C Polyethylene Terephthalate (and) Acrylates Copolymer
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Disodium EDTA
0.02
Various
Chelating Agent
Glycerin
5.00
Various
Humectant
Dipropylene Glycol
3.00
Various
Humectant
Glycereth-26
2.00
Liponic EG�1/Lipo Chemical
Humectant
Sodium Hyaluronate (and) Aqua
10.00
Various (1% Solution)
Skin Conditioning
Portulaca Oleracea (Purselane) Extract
3.00
Various
Skin Conditioning
Phase A
PEG�11 Methyl Ether Dimethicone
1.00
SeraSol® SC 85/KCC Beauty
O/W Co-Emulsifier
Bis-PEG�18 Methyl Ether Dimethyl Silane
1 .50
Se ra So f® SW 72 ®/ KCC Bea ut y
C on di ti on in g
Phase B Dimethicone
1.00
SeraSense® SF 100/KCC Beauty
Conditioning
Dimethicone (and) Dimethicone/ VinylDimethicone Crosspolymer
3.00
Se ra Si lk ®E M 61 /KCC B eaut y
S ilk y Fe el
Cyclopentasiloxane
3.00
SeraSense® SF CM5/KCC Beauty
Improves Spreading
PEG�60 Hydrogenated Castor Oil
0.40
HCO�60/Nikko
Co-Emulsifier
Phenoxyethanol
0.30
Various
Preservative
Parfum (Fragrance)
q.s.
-
Fragrance
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer (and) Squalane (and) Polysorbate 60
2.00
Simulgel NS/Seppic
Thickener
Ammonium Acryloyldimethyltaurate/VP Copolymer
0.20
Aristoflex AVC/Clariant
Thickener
Phase C
Phase D 0.0 8
Appearance: Slightly hazy gel with glitter Viscosity @ 25°C: >15000cP (Brookfield RVT, Sp4, 10rpm) pH @ 25°C: 5.5 – 6.5
• Mix the ingredients of Phase A until homogenous. • In a separate vessel, mix the ingredients of Phase B. • Measure the refractive index ofeach phase. Match Phase A to Phase B byeither adding waterto decrease the RI, or glycerin to increase it. • Add Bto A and stir until homogenous. • Add Phase C.
Appearance: White, viscous gel-cream Viscosity @ 25°C: >45000cP (Brookfield LVDV II, LV�4, 6rpm) pH @ 25°C: 5.5 – 6.5
• Mix the ingredients of Phase A until homogenous. • In a separate vessel, mix the ingredients of Phase B. Add Phase B to Phase A and homogenise for 5 minutes. • Premix Phase C and add to A+B. • Add Phase D. • Check pH and viscosity.
Guide Formulation Hair Care/Skin Care
Guide Formulation Skin Care
Sparkling Oil Gel is a refractive index matched formulation of both oil and water. SeraSol® SC 81 (PEG�12 Dimethicone) is an emulsifier and humectant. S eraSense® GB 10 (Cyclopentasiloxane (and) Dimethiconol) gives long lasting moisturisation to thirsty skin and hair. This product can be used on wet or dry skin, or as a serum for hair.
This oil and alcohol-free formulation gives a cool feeling to skin. SeraSense® EM 61 (Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer) smoothes the skin, without feeling tacky, also reducing pore size. SeraSo® SW 72 (Bis –PEG18 Methyl Ether Dimethyl Silane ) is a so wax which melts on contact with skin to leave a silky so feel.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Phase A Aqua (Water)
15.28
-
Vehicle
PEG�12 Dimethicone
0.50
SeraSol® SC 81/KCC Beauty
Humectant
Propanediol
47.00
Zemea/IMCD (Dupont)
Humectant
Glycerin
14.90
Surfac G995V/Surfachem
Humectant
Citric Acid
0.11
Surfac Citric Acid Mono BP/ Surfachem
pH Adjuster
Phenoxyethanol (and) Benzyl Alcohol (and) Potassium Sorbate (and) Aqua (and) Tocopheryl
1.00
Euxyl K700/Schülke
Preservative
Phase B Sodium Acrylate (and) Sodium Acryloyldimethyl Taurate Copolymer (and) Isohexadecane (and) Polysorbate 80
4.00
Cyclopentasiloxane (and) Dimethiconol
10.00
SeraSense® GB 10/KCC Beauty
Moisturising
Isononyl Isononanoate
4.00
Lanol 99/Seppic
Emollient
Pyrus Malus(Apple) Se ed Oil
3.0 0
Seatons Alpine Apple See d Oil/ Seatons
Moisturising
Parfum (Fragrance)
0.10
Vitamin 248 Fragrance/ Givaudan
Fragrance
Simulgel EG/Seppic
Thickener
D is co V HT He x0.0 06 /Az el is
Ae sth eti cs
Phase C Polyethylene Terephthalate (and) Acrylates Copolymer
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Disodium EDTA
0.02
Various
Chelating Agent
Glycerin
5.00
Various
Humectant
Dipropylene Glycol
3.00
Various
Humectant
Glycereth-26
2.00
Liponic EG�1/Lipo Chemical
Humectant
Sodium Hyaluronate (and) Aqua
10.00
Various (1% Solution)
Skin Conditioning
Portulaca Oleracea (Purselane) Extract
3.00
Various
Skin Conditioning
Phase A
PEG�11 Methyl Ether Dimethicone
1.00
SeraSol® SC 85/KCC Beauty
O/W Co-Emulsifier
Bis-PEG�18 Methyl Ether Dimethyl Silane
1 .50
Se ra So f® SW 72 ®/ KCC Bea ut y
C on di ti on in g
Phase B Dimethicone
1.00
SeraSense® SF 100/KCC Beauty
Conditioning
Dimethicone (and) Dimethicone/ VinylDimethicone Crosspolymer
3.00
Se ra Si lk ®E M 61 /KCC B eaut y
S ilk y Fe el
Cyclopentasiloxane
3.00
SeraSense® SF CM5/KCC Beauty
Improves Spreading
PEG�60 Hydrogenated Castor Oil
0.40
HCO�60/Nikko
Co-Emulsifier
Phenoxyethanol
0.30
Various
Preservative
Parfum (Fragrance)
q.s.
-
Fragrance
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer (and) Squalane (and) Polysorbate 60
2.00
Simulgel NS/Seppic
Thickener
Ammonium Acryloyldimethyltaurate/VP Copolymer
0.20
Aristoflex AVC/Clariant
Thickener
Phase C
Phase D 0.0 8
Appearance: Slightly hazy gel with glitter Viscosity @ 25°C: >15000cP (Brookfield RVT, Sp4, 10rpm) pH @ 25°C: 5.5 – 6.5
• Mix the ingredients of Phase A until homogenous. • In a separate vessel, mix the ingredients of Phase B. • Measure the refractive index ofeach phase. Match Phase A to Phase B byeither adding waterto decrease the RI, or glycerin to increase it. • Add Bto A and stir until homogenous. • Add Phase C.
Appearance: White, viscous gel-cream Viscosity @ 25°C: >45000cP (Brookfield LVDV II, LV�4, 6rpm) pH @ 25°C: 5.5 – 6.5
• Mix the ingredients of Phase A until homogenous. • In a separate vessel, mix the ingredients of Phase B. Add Phase B to Phase A and homogenise for 5 minutes. • Premix Phase C and add to A+B. • Add Phase D. • Check pH and viscosity.
Guide Formulation Skin Care
Guide Formulation Skin Care
This super-hydrating cream is lightweight giving a cool, watery feeling. SeraSol® EL 92 (Dimethicone (and) Dimethicone/PEG�10/15 Crosspolymer) is an emulsifying elastomer, giving a unique ‘water drop’ appearance when massaged into the skin. SeraSens e® SF 6 (Dimethicone) leaves skin feeling moisturised and so.
This light gel-cream leaves skin feeling refreshed and supple. SeraSol® SC 85 (PEG�11 Methyl Ether Dimethicone) is a cold-processable O/W emulsier and humectant. SeraSo® SW 72 (Bis-PEG18 Methyl Ether Dimethyl Silane) melts on contact with skin to give a silky-smooth feel. Raw Material/INCI Name
Raw Material/INCI Name
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Disodium EDTA
0.02
Various
Chelating Agent
5.00
Various
Humectant
2.00
Fucogel 1.5P/Solabia
Moisturising
10.00
Sodium Hyaluronate (1% Solution)/Various
Skin Conditioning
Beta-Glucan
3.00
Beta-Glucan (0.4% Solution)
Skin Conditioning
PEG�11 Methyl Ether Dimethicone
1.00
SeraSol® SC 85/KCC B eauty
O/W Emulsifier
Bis-PEG�18 Methyl Ether DimethylSilane
1 .0 0
Se ra Sof ®SW 72 /KCC Be aut y
Sk in Sm oot hi ng and Sofening
Trade name/Supplier
Function
Dimethicone(and) Dimethicone/PEG�10/15 Crosspolymer
3.00
SeraSol® EL 92 /KCC Beauty
W/O Emulsifier
Glycerin
Cyclopentasiloxane
5.00
SeraSense® CM5/KCC Beauty
Fast Absorption
Biosaccharide Gum-1
Dimethicone
5.00
SeraSense® SF 6/KCC Beauty
Improves Spreading/ Moisturising
Sodium Hyaluronate (and) Aqua (Water)
Aqua (Water)
To 100
-
Vehicle
Glycerin
5.00
Various
Humectant
Dipropylene Glycol
3.00
Various
Humectant
Portulaca Oleracea (Purselane) Extract
3.00
Various
Skin Conditioning
Sodium Chloride
0.80
Various
Emulsion Stabiliser
Phase A
Phase B
Phase C
Phase A
Phase B Dimethicone
2.00
SeraSense® SF 6/KCC Beauty
Skin Conditioning
Dimethicone(and) Dimethiconol
1.0 0
SeraSense® GB 16/KCCBeauty
Long-lasting Skin Conditioning
5.0 0
SeraSense® SF CM56/KCC Beauty
Skin Conditioning
Phenoxyethanol
0.30
Various
Preservative
Dye
q.s.
-
Aesthetics
Cyclopentasiloxane (and) Cyclohexasiloxane
Parfum (Fragrance)
0.10
Saturn Fragrance/Givaudan
Fragrance
Phase C
Appearance: Light blue, viscous cream Viscosity @ 25°C: >60000cP (Brookfield LVDV II, LV�4, 6rpm) pH @ 25°C: n/a
• • • •
% w/w
% w/w
Mix the ingredients of Phase A until homogenous. In a separate vessel, mix the ingredients of Phase B, then add to Phase A. Add the ingredients of Phase C, stirring until homogenous. Check pH and viscosity.
Tocopheryl Acetate
0.10
Various
Skin Conditioning
PEG�60 Hydrogenated Castor Oil
0.30
HCO�60/Nikko
Emulsifier
Phenoxyethanol
0.30
Various
Preservative
Parfum (Fragrance)
q.s.
-
Fragrance
Colourant
q.s.
Various
Aesthetics
1.00
Aristoflex AVC/Clariant
Thickener/Stabiliser
Phase D Ammonium Acryloyl Dimethyl Taurate/VP Copolymer
Appearance: Light pink, viscous cream Viscosity @ 25°C: 50000 - 60000cP (Brookfield LVDV II, LV�4, 6rpm) pH @ 25°C: 5.5 – 6.5
• Mix the ingredients of Phase A until homogenous. • In a separate vessel, mix the ingredients of Phase B. Add Phase B to Phase A; homogenise for 5 minutes. • Premix Phase C and add to A+B. • Add Phase D. • Check pH and viscosity.
Guide Formulation Skin Care
Guide Formulation Skin Care
This super-hydrating cream is lightweight giving a cool, watery feeling. SeraSol® EL 92 (Dimethicone (and) Dimethicone/PEG�10/15 Crosspolymer) is an emulsifying elastomer, giving a unique ‘water drop’ appearance when massaged into the skin. SeraSens e® SF 6 (Dimethicone) leaves skin feeling moisturised and so.
This light gel-cream leaves skin feeling refreshed and supple. SeraSol® SC 85 (PEG�11 Methyl Ether Dimethicone) is a cold-processable O/W emulsier and humectant. SeraSo® SW 72 (Bis-PEG18 Methyl Ether Dimethyl Silane) melts on contact with skin to give a silky-smooth feel. Raw Material/INCI Name
Raw Material/INCI Name
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Disodium EDTA
0.02
Various
Chelating Agent
Glycerin
5.00
Various
Humectant
Trade name/Supplier
Function
Dimethicone(and) Dimethicone/PEG�10/15 Crosspolymer
3.00
SeraSol® EL 92 /KCC Beauty
W/O Emulsifier
Cyclopentasiloxane
5.00
SeraSense® CM5/KCC Beauty
Fast Absorption
Biosaccharide Gum-1
2.00
Fucogel 1.5P/Solabia
Moisturising
Dimethicone
5.00
SeraSense® SF 6/KCC Beauty
Improves Spreading/ Moisturising
Sodium Hyaluronate (and) Aqua (Water)
10.00
Sodium Hyaluronate (1% Solution)/Various
Skin Conditioning
Beta-Glucan
3.00
Beta-Glucan (0.4% Solution)
Skin Conditioning
Aqua (Water)
To 100
-
Vehicle
SeraSol® SC 85/KCC B eauty
O/W Emulsifier
5.00
Various
Humectant
PEG�11 Methyl Ether Dimethicone
1.00
Glycerin Dipropylene Glycol
3.00
Various
Humectant
Bis-PEG�18 Methyl Ether DimethylSilane
1 .0 0
Se ra Sof ®SW 72 /KCC Be aut y
Sk in Sm oot hi ng and Sofening
Portulaca Oleracea (Purselane) Extract
3.00
Various
Skin Conditioning
Sodium Chloride
0.80
Various
Emulsion Stabiliser
Dimethicone
2.00
SeraSense® SF 6/KCC Beauty
Skin Conditioning
Dimethicone(and) Dimethiconol
1.0 0
SeraSense® GB 16/KCCBeauty
Long-lasting Skin Conditioning
5.0 0
SeraSense® SF CM56/KCC Beauty
Skin Conditioning
Phase A
Phase A
Phase B
Phase B
Phase C Phenoxyethanol
0.30
Various
Preservative
Dye
q.s.
-
Aesthetics
Cyclopentasiloxane (and) Cyclohexasiloxane
Parfum (Fragrance)
0.10
Saturn Fragrance/Givaudan
Fragrance
Phase C
Appearance: Light blue, viscous cream Viscosity @ 25°C: >60000cP (Brookfield LVDV II, LV�4, 6rpm) pH @ 25°C: n/a
• • • •
% w/w
% w/w
Mix the ingredients of Phase A until homogenous. In a separate vessel, mix the ingredients of Phase B, then add to Phase A. Add the ingredients of Phase C, stirring until homogenous. Check pH and viscosity.
Tocopheryl Acetate
0.10
Various
Skin Conditioning
PEG�60 Hydrogenated Castor Oil
0.30
HCO�60/Nikko
Emulsifier
Phenoxyethanol
0.30
Various
Preservative
Parfum (Fragrance)
q.s.
-
Fragrance
Colourant
q.s.
Various
Aesthetics
1.00
Aristoflex AVC/Clariant
Thickener/Stabiliser
Phase D Ammonium Acryloyl Dimethyl Taurate/VP Copolymer
Appearance: Light pink, viscous cream Viscosity @ 25°C: 50000 - 60000cP (Brookfield LVDV II, LV�4, 6rpm) pH @ 25°C: 5.5 – 6.5
• Mix the ingredients of Phase A until homogenous. • In a separate vessel, mix the ingredients of Phase B. Add Phase B to Phase A; homogenise for 5 minutes. • Premix Phase C and add to A+B. • Add Phase D. • Check pH and viscosity.
Guide Formulation Skin Care
Guide Formulation Sun Care
This intensive moisturising mask is designed to be applied before bedtime so it can replenish the skin overnight. T he blend of silicone products within the formulation give long-lasting moisturisation and a silky-so skin feel. SeraSense® SF MTM (Methyl Trimethicone) can be used as a replacement for Cyclopentasiloxane, however it has a faster volatility and lower freezing point than D5.
This light-feeling, waterproof sunscreen can also be used as a make-up base. SeraSense® SF CPM (Caprylyl Methicone) is a volatile silicone which reduces the rub-in time of creams and lotions. SeraSol® SC 86 (PEG�10 Dimethicone) is a strong W/O emulsifier and humectant. SeraSol® EL 92 (Dimethicone (and) Dimethicone/ PEG�10/15 Crosspolymer) is a highly-stable elastomeric emulsifier which gives a non-greasy feel.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Raw Material/INCI Name
Phase A
Trade name/Supplier
Function
Caprylyl Methicone
10.00
SeraSense® SF CPM/KCC Beauty
Solvent/Emollient
Dimethicone
5.00
SeraSense® SF 6/KCC Beauty
Moisturising
3.00
SeraSense® SF PTM/KCC Beauty
Solvent/Emollient
Aqua (Water)
To 100
-
Vehicle
PEG�240/HDI Copolymer BisDecyltetradeceth-20 Ether
1. 50
Ade ka nol G T�70 0/Asa hi D en ka
Th ic ke ne r
Disodium EDTA
0.02
Various
Chelating Agent
Phenyl T rimethicone
Glycerin
3.00
Various
Humectant
PEG�10 Dimethicone
1.00
SeraSol® SC 86/KCC Beauty
W/O Emulsifier
Dipropylene Glycol
5.00
Various
Humectant
Dimethicone (and) Dimethicone/PEG�10/15 Crosspolymer
3.00
SeraSol® EL92/KCC Beauty
EmulsiyingElastomer
Phase B Squalane
3.00
Various
Moisturising
SeraSilk®EL61/KCC Beauty
2.0 0
Genuine Rice Bran Wax/ Cornelius
Moisturising
Dimethicone (and) Dimethicone/Vinyl DimethiconeCrosspolymer
1.00
Oryza Sativa (Rice) Bran Wax
Skin Feel/Viscosity Modifier
C14�22 Alcohol (and) C12�20 Alkyl Glucoside
2.50
Montanov L/Seppic
Emulsifier
Diste ardimonium Hectorite
1.0 0
Bentone 38V/Elementis Speciality
Thickener
Glycerol Stearate (and) PEG�100 Stearate
1.00
Arlacel 165/Croda
Emulsifier
Ethylhexylmethoxycinnamate
7.00
Uvinul MC�80/BASF
UVB Absorber
Tocopheryl Acetate
0.50
Various
Anti-oxidant
Ethylhexyl Salicylate
4.50
Parsol EHS/DSM
UVB Absorber
Mica (and) Titanium Dioxide
1.50
Flamenco Red 420C/BASF
Pigment
Titanium Dioxide (and) Aluminium Hydroxide (and) Stearic Acid (and) Cyclopentasiloxane (and) PEG10 Dimethicone
5.0 0
Ch oi ce Ti tan 40/Ch oi ce Trad e
U VAbs or be r
Aqua (Water)
To 100
-
Vehicle
Dipropylene Glycol
5.00
Various
Humectant
Portulaca Oleracea (Purselane) Extract
3.00
Various
Skin Conditioning
Sodium Chloride
1.00
Various
Emulsion Stabiliser
Phenoxyethanol
0.40
Various
Preservative
Caprylhydroxamic Acid (and) Caprylyl Glycol (and) Glycerin
0.40
Spectrastat/Inolex
Preservative
Parfum (Fragrance)
q.s.
-
Fragrance
Phase C Dimethicone
3.00
SeraSense® SF 6/KCC Beauty
Skin Feel
Methyl Trimethicone
4.00
SeraSense® SF MTM/KCC Beauty
Skin Feel/ Spreadability
Dimethicone(and) Dimethiconol
1.0 0
SeraSense® GB 16/KCCBeauty
Long-lasting skin conditioning
Dimethicone(and) Dimethicone/Vinyl Dimethicone Crosspolymer
2.00
SeraSilk® EL 61/KCC B eauty
Occlusive
Phase B
Phase D Sodium Hyaluronate
10.00
Sodium Hyaluronate 1% Solution
Humectant
Phase E Phenoxyethanol
0.30
Various
Preservative
Colourant
q.s.
-
Aesthetics
Parfum (Fragrance)
q.s.
-
Fragrance
Appearance: Light pink, viscous cream Viscosity @ 25°C: 150000 - 250000cP (Brookfield LVDV II, LV�4, 3rpm) pH @ 25°C: 6.0 – 7.0
• • • •
% w/w
Phase A
Heat Phase A to 8085°C. Heat Phase B to 8085°C. Add Phase C and stir until homogenous. Add Phase B+C to Phase A, homogenising until smooth. Reduce the temperature to 4050°C and add Phases D and E.
Phase C
Appearance: Light pink, viscous cream Viscosity @ 25°C: 15000 - 20000cP (Brookfield LVDV II, LV4, 6rpm) pH @ 25°C: n/a
• • • •
Mix the ingredients of Phase A until homogenous. In a separate vessel, mix the ingredients of Phase B until homogenous. Add Phase B to A with stirring. Slowly add Phase C to A+B, with stirring. Check viscosity.
Guide Formulation Skin Care
Guide Formulation Sun Care
This intensive moisturising mask is designed to be applied before bedtime so it can replenish the skin overnight. T he blend of silicone products within the formulation give long-lasting moisturisation and a silky-so skin feel. SeraSense® SF MTM (Methyl Trimethicone) can be used as a replacement for Cyclopentasiloxane, however it has a faster volatility and lower freezing point than D5.
This light-feeling, waterproof sunscreen can also be used as a make-up base. SeraSense® SF CPM (Caprylyl Methicone) is a volatile silicone which reduces the rub-in time of creams and lotions. SeraSol® SC 86 (PEG�10 Dimethicone) is a strong W/O emulsifier and humectant. SeraSol® EL 92 (Dimethicone (and) Dimethicone/ PEG�10/15 Crosspolymer) is a highly-stable elastomeric emulsifier which gives a non-greasy feel.
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Raw Material/INCI Name
Phase A Aqua (Water)
To 100
-
Vehicle
PEG�240/HDI Copolymer BisDecyltetradeceth-20 Ether
1. 50
Ade ka nol G T�70 0/Asa hi D en ka
Th ic ke ne r
Caprylyl Methicone
Trade name/Supplier
Function
10.00
SeraSense® SF CPM/KCC Beauty
Solvent/Emollient
Dimethicone
5.00
SeraSense® SF 6/KCC Beauty
Moisturising
3.00
SeraSense® SF PTM/KCC Beauty
Solvent/Emollient
Disodium EDTA
0.02
Various
Chelating Agent
Phenyl T rimethicone
Glycerin
3.00
Various
Humectant
PEG�10 Dimethicone
1.00
SeraSol® SC 86/KCC Beauty
W/O Emulsifier
Dipropylene Glycol
5.00
Various
Humectant
Dimethicone (and) Dimethicone/PEG�10/15 Crosspolymer
3.00
SeraSol® EL92/KCC Beauty
EmulsiyingElastomer
Squalane
3.00
Various
Moisturising
SeraSilk®EL61/KCC Beauty
2.0 0
Genuine Rice Bran Wax/ Cornelius
Moisturising
Dimethicone (and) Dimethicone/Vinyl DimethiconeCrosspolymer
1.00
Oryza Sativa (Rice) Bran Wax
Skin Feel/Viscosity Modifier
C14�22 Alcohol (and) C12�20 Alkyl Glucoside
2.50
Montanov L/Seppic
Emulsifier
Diste ardimonium Hectorite
1.0 0
Bentone 38V/Elementis Speciality
Thickener
Glycerol Stearate (and) PEG�100 Stearate
1.00
Arlacel 165/Croda
Emulsifier
Ethylhexylmethoxycinnamate
7.00
Uvinul MC�80/BASF
UVB Absorber
Tocopheryl Acetate
0.50
Various
Anti-oxidant
Ethylhexyl Salicylate
4.50
Parsol EHS/DSM
UVB Absorber
Phase B
Phase C
Mica (and) Titanium Dioxide
1.50
Flamenco Red 420C/BASF
Pigment
Dimethicone
3.00
SeraSense® SF 6/KCC Beauty
Skin Feel
5.0 0
Ch oi ce Ti tan 40/Ch oi ce Trad e
U VAbs or be r
Methyl Trimethicone
4.00
SeraSense® SF MTM/KCC Beauty
Skin Feel/ Spreadability
Dimethicone(and) Dimethiconol
1.0 0
SeraSense® GB 16/KCCBeauty
Long-lasting skin conditioning
Titanium Dioxide (and) Aluminium Hydroxide (and) Stearic Acid (and) Cyclopentasiloxane (and) PEG10 Dimethicone
Dimethicone(and) Dimethicone/Vinyl Dimethicone Crosspolymer
2.00
SeraSilk® EL 61/KCC B eauty
Occlusive
To 100
-
Vehicle
Phase B Aqua (Water)
Phase D Sodium Hyaluronate
10.00
Sodium Hyaluronate 1% Solution
Humectant
Phase E Phenoxyethanol
0.30
Various
Preservative
Colourant
q.s.
-
Aesthetics
Parfum (Fragrance)
q.s.
-
Fragrance
Appearance: Light pink, viscous cream Viscosity @ 25°C: 150000 - 250000cP (Brookfield LVDV II, LV�4, 3rpm) pH @ 25°C: 6.0 – 7.0
• • • •
% w/w
Phase A
Dipropylene Glycol
5.00
Various
Humectant
Portulaca Oleracea (Purselane) Extract
3.00
Various
Skin Conditioning
Sodium Chloride
1.00
Various
Emulsion Stabiliser
Phenoxyethanol
0.40
Various
Preservative
Caprylhydroxamic Acid (and) Caprylyl Glycol (and) Glycerin
0.40
Spectrastat/Inolex
Preservative
Parfum (Fragrance)
q.s.
-
Fragrance
Phase C
Appearance: Light pink, viscous cream Viscosity @ 25°C: 15000 - 20000cP (Brookfield LVDV II, LV4, 6rpm) pH @ 25°C: n/a
Heat Phase A to 8085°C. Heat Phase B to 8085°C. Add Phase C and stir until homogenous. Add Phase B+C to Phase A, homogenising until smooth. Reduce the temperature to 4050°C and add Phases D and E.
• • • •
Mix the ingredients of Phase A until homogenous. In a separate vessel, mix the ingredients of Phase B until homogenous. Add Phase B to A with stirring. Slowly add Phase C to A+B, with stirring. Check viscosity.
Guide Formulation Skin Care
Guide Formulation Skin Care
This dual-phase product is designed to be misted over make-up, to give a long-lasting finish. SeraSense® RB 21 (Dimethicone (and) Trimethylsiloxysilicate) is a resin blend which leaves a flexible, long-lasti ng film on the skin. SeraSens e® SF PTM (Phenyl Trimethicone) has a high refractive index and so giving radiance.
The wrinkle reduction effect is thanks to elastomer powder S eraSense® SP 13 (Dimethicone/Vinyl Dimethicone Crosspolymer). This is an easily dispe rsed powder which creates a so focus eect and leaves the skin incredibly silky and smooth. Raw Material/INCI Name
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Dimethicone/Vinyl Dimethicone Crosspolymer
22.00
SeraSnow® SP 13/KCC Beauty
Wrinkle Filling/Sof Focus Effect
Phenyl Trimethicone
6.00
SeraSense® SF PTM/KCC Beauty
Solvent/Emollient
Cyclopentasiloxane
To 100
SeraSense® CM5/KCC Beauty
Solvent/Emollient
Chelating Agent
Tocopheryl Acetate
0.10
Various
Skin Conditioning
Phase B Mica (and) Titanium Dioxide
0.50
Flamenco Red 4 20C/BASF
Pigment
Parfum (Fragrance)
q.s.
-
Fragrance
Aqua (and) Butylene Glycol (and) Sodium Bicarbonate (and) Xanthan Gum Crosspolymer (and) Hydroxyethylcellulose
1.00
Quickli/BASF
Skin Liing
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Glycerin
5.00
Various
Humectant
Sodium Hyaluronate (and) Aqua (Water)
3.0 0
Sodium Hyaluronate (1% Solution)/Various
Skin Conditioning
Disodium EDTA
0.05
Various
Phase A
Phase A
Bis-PEG�18 Methyl Ether DimethylSilane
2 .00
Se ra So f® SW 72 /KCC B eaut y
Sk in Con dit io ni ng
PEG�12 Dimethicone
1.00
SeraSol® SC 81/KCC Beauty
Emulsifier
Phenoxyethanol
0.40
Various
Preservative
Dye
q.s.
Various
Aesthetics
20.0
SeraSense® SF MTM/KCC Beauty
FastAbsorption
Phase B Methyl Trimethicone Phenyl Trimethicone
5.00
SeraSense® SF PTM/KCC Beauty
Radiance
Dimethicone(and) Trimethylsiloxysilicate
3.00
Se ra Se ns e® RB 2 1/ KCC B eaut y
Fi xat ive
Tocopheryl Acetate
0.20
Various
Skin Conditioning
Prunus Amygdalus Dulcis (Sweet Almond) Oil
0.20
Various
Moisturising
Phase C Parfum (Fragrance)
0.10
Vitamin 248 Fragrance/Givaudan
Fragrance
Appearance: Water Phase: Clear purple, Oil Phase: Clea r colourless Viscosity @ 25°C: n/a pH @ 25°C: Water Phase: 6.0 – 7.0
• Mix the ingredients of Phase A until homogenous. • In a separate vessel, mix the ingredients of Phase B. Add the two phases together and mix. • Add Phase C
Appearance: Hazy, viscous gel Viscosity @ 25°C: >750000cP (Brookfield HBDV II, Sp6, 1rpm) pH @ 25°C: n/a
• • • •
Premix the ingredients of Phase A. In the main vessel, add the ingredients of Phase Band mix until homogenous. Add Phase A to B and mix until homogenous. Check viscosity.
Guide Formulation Skin Care
Guide Formulation Skin Care
This dual-phase product is designed to be misted over make-up, to give a long-lasting finish. SeraSense® RB 21 (Dimethicone (and) Trimethylsiloxysilicate) is a resin blend which leaves a flexible, long-lasti ng film on the skin. SeraSens e® SF PTM (Phenyl Trimethicone) has a high refractive index and so giving radiance.
The wrinkle reduction effect is thanks to elastomer powder S eraSense® SP 13 (Dimethicone/Vinyl Dimethicone Crosspolymer). This is an easily dispe rsed powder which creates a so focus eect and leaves the skin incredibly silky and smooth. Raw Material/INCI Name
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
To 100
-
Vehicle
Trade name/Supplier
Function
Dimethicone/Vinyl Dimethicone Crosspolymer
22.00
SeraSnow® SP 13/KCC Beauty
Wrinkle Filling/Sof Focus Effect
Phenyl Trimethicone
6.00
SeraSense® SF PTM/KCC Beauty
Solvent/Emollient
Cyclopentasiloxane
To 100
SeraSense® CM5/KCC Beauty
Solvent/Emollient
0.10
Various
Skin Conditioning
Mica (and) Titanium Dioxide
0.50
Flamenco Red 4 20C/BASF
Pigment
Parfum (Fragrance)
q.s.
-
Fragrance
Aqua (and) Butylene Glycol (and) Sodium Bicarbonate (and) Xanthan Gum Crosspolymer (and) Hydroxyethylcellulose
1.00
Quickli/BASF
Skin Liing
Phase A
Phase A Aqua (Water)
% w/w
Glycerin
5.00
Various
Humectant
Sodium Hyaluronate (and) Aqua (Water)
3.0 0
Sodium Hyaluronate (1% Solution)/Various
Skin Conditioning
Disodium EDTA
0.05
Various
Chelating Agent
Tocopheryl Acetate
Bis-PEG�18 Methyl Ether DimethylSilane
2 .00
Se ra So f® SW 72 /KCC B eaut y
Sk in Con dit io ni ng
Phase B
PEG�12 Dimethicone
1.00
SeraSol® SC 81/KCC Beauty
Emulsifier
Phenoxyethanol
0.40
Various
Preservative
Dye
q.s.
Various
Aesthetics
Methyl Trimethicone
20.0
SeraSense® SF MTM/KCC Beauty
FastAbsorption
Phenyl Trimethicone
5.00
SeraSense® SF PTM/KCC Beauty
Radiance
Dimethicone(and) Trimethylsiloxysilicate
3.00
Se ra Se ns e® RB 2 1/ KCC B eaut y
Fi xat ive
Tocopheryl Acetate
0.20
Various
Skin Conditioning
Prunus Amygdalus Dulcis (Sweet Almond) Oil
0.20
Various
Moisturising
Phase B
Phase C Parfum (Fragrance)
0.10
Vitamin 248 Fragrance/Givaudan
Fragrance
Appearance: Hazy, viscous gel Viscosity @ 25°C: >750000cP (Brookfield HBDV II, Sp6, 1rpm) pH @ 25°C: n/a
• • • •
Premix the ingredients of Phase A. In the main vessel, add the ingredients of Phase Band mix until homogenous. Add Phase A to B and mix until homogenous. Check viscosity.
Appearance: Water Phase: Clear purple, Oil Phase: Clea r colourless Viscosity @ 25°C: n/a pH @ 25°C: Water Phase: 6.0 – 7.0
• Mix the ingredients of Phase A until homogenous. • In a separate vessel, mix the ingredients of Phase B. Add the two phases together and mix. • Add Phase C
Guide Formulation Nail Care
Guide Formulation Skin Care
This Nourishing Nail Drying Spray is to be applied aer nails have been painted. SeraSense® SF 1.5 (Dimethicone) is a volatile silicone of 1.5cS that speeds up drying time. SeraSense® RB 21 (Dimethicone (and) Trimethylsiloxysilicate) is a resin blend that protects wet nails from damage. This product can also be used as a nail conditioning oil.
This clear gel cream is highly moisturising, and leaves the skin supple. SeraSol® SC 84 (Cyclopentasiloxane (and) PEG/PPG�18/18 Dimethicone) is a W/O emulsifier which helps to create a clear product. The blend of silicones gives a so feel and spreadability to the cream. Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Phase A
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
SeraSol® SC 84/KCC Beauty
W/O Emulsifier
To 100
SeraSense® SF 1.5/KCC Beauty
Quick Drying
Cyclopentasiloxane(and) PEG/ PPG�18/18Dimethicone
10.00
Dimethicone Phenyl Trimethicone
3.00
SeraSense® SF PTM/KCC Beauty
Glossing Agent
Cyclopentasiloxane
6.00
SeraSense® SF CM5/KCC Beauty
FastAbsorption
Dimethicone(and) Trimethylsiloxysilicate
5.0 0
S era Sen se® RB 21 /KCC B eaut y
Fi lm Form er
Dimethicone
2.00
SeraSense® SF 6/KCC Beauty
Moisturising
Equisetum Arvense Extract (and) Helianthus Annuus (Sunflower) Seed Oil (and) BHT
5.0 0
Cosflor Horsetail OS�1/A&E Connock
NailStrengthening
Phenyl Trimethicone
2.00
SeraSense® SF PTM/KCC Beauty
Moisturising/Film Forming
Linum Usitatissimum (Linseed) Seed Oil
1.0 0
Flaxsee d Oil Re fined/A&E Connock
NailConditioning
Aqua (Water)
To 100
-
Vehicle
Tocopheryl Acetate
0.10
Tocopheryl Acetate/A&E Connock
Nail Conditioning
Glycerin
38.00
Various
Humectant
Parfum (Fragrance)
0.05
Mango Blast Fragrance/Givaudan
Fragrance
Sodium Chloride
1.50
Various
Buffer
5.00
Various
Humectant
Caprylhydroxamic Acid (and) Carpylyl Glycol (and) Glycerin
0.30
Spectrastat/Inolex
Preservative
PEG�60 Hydrogenated Castor Oil
0.05
HCO�60/Nikko
Solubiliser
Parfum (Fragrance)
0.05
Mango Blast Fragrance/ Givaudan
Fragrance
Phase B
Phase C Glycerin
Appearance: Clear, colourless liquid Viscosity @ 25°C: n/a pH @ 25°C: n/a
Phase D
• Add the ingredients in order, stirring well between additions.
Appearance: Clear, viscous gel-cream Viscosity @ 25°C: 30000 – 40000cP (Brookfield LVDV II, LV�4, 6rpm) pH @ 25°C: n/a
• • • •
Mix the ingredients of Phase A until homogenous. In a separate vessel, mix the ingredients of Phase B. Slowly add Phase B to Phase A. Add Phase C. In a separate vessel, premix the ingredients of Phase D. Add tothe main batch.
Guide Formulation Nail Care
Guide Formulation Skin Care
This Nourishing Nail Drying Spray is to be applied aer nails have been painted. SeraSense® SF 1.5 (Dimethicone) is a volatile silicone of 1.5cS that speeds up drying time. SeraSense® RB 21 (Dimethicone (and) Trimethylsiloxysilicate) is a resin blend that protects wet nails from damage. This product can also be used as a nail conditioning oil.
This clear gel cream is highly moisturising, and leaves the skin supple. SeraSol® SC 84 (Cyclopentasiloxane (and) PEG/PPG�18/18 Dimethicone) is a W/O emulsifier which helps to create a clear product. The blend of silicones gives a so feel and spreadability to the cream. Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Phase A
Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
SeraSol® SC 84/KCC Beauty
W/O Emulsifier
To 100
SeraSense® SF 1.5/KCC Beauty
Quick Drying
Cyclopentasiloxane(and) PEG/ PPG�18/18Dimethicone
10.00
Dimethicone Phenyl Trimethicone
3.00
SeraSense® SF PTM/KCC Beauty
Glossing Agent
Cyclopentasiloxane
6.00
SeraSense® SF CM5/KCC Beauty
FastAbsorption
Dimethicone(and) Trimethylsiloxysilicate
5.0 0
S era Sen se® RB 21 /KCC B eaut y
Fi lm Form er
Dimethicone
2.00
SeraSense® SF 6/KCC Beauty
Moisturising
Equisetum Arvense Extract (and) Helianthus Annuus (Sunflower) Seed Oil (and) BHT
5.0 0
Cosflor Horsetail OS�1/A&E Connock
NailStrengthening
Phenyl Trimethicone
2.00
SeraSense® SF PTM/KCC Beauty
Moisturising/Film Forming
Linum Usitatissimum (Linseed) Seed Oil
1.0 0
Flaxsee d Oil Re fined/A&E Connock
NailConditioning
Aqua (Water)
To 100
-
Vehicle
Tocopheryl Acetate
0.10
Tocopheryl Acetate/A&E Connock
Nail Conditioning
Glycerin
38.00
Various
Humectant
Parfum (Fragrance)
0.05
Mango Blast Fragrance/Givaudan
Fragrance
Sodium Chloride
1.50
Various
Buffer
5.00
Various
Humectant
Caprylhydroxamic Acid (and) Carpylyl Glycol (and) Glycerin
0.30
Spectrastat/Inolex
Preservative
PEG�60 Hydrogenated Castor Oil
0.05
HCO�60/Nikko
Solubiliser
Parfum (Fragrance)
0.05
Mango Blast Fragrance/ Givaudan
Fragrance
Phase B
Phase C Glycerin
Appearance: Clear, colourless liquid Viscosity @ 25°C: n/a pH @ 25°C: n/a
Phase D
• Add the ingredients in order, stirring well between additions.
Appearance: Clear, viscous gel-cream Viscosity @ 25°C: 30000 – 40000cP (Brookfield LVDV II, LV�4, 6rpm) pH @ 25°C: n/a
• • • •
Mix the ingredients of Phase A until homogenous. In a separate vessel, mix the ingredients of Phase B. Slowly add Phase B to Phase A. Add Phase C. In a separate vessel, premix the ingredients of Phase D. Add tothe main batch.
Guide Formulation Skin Care
This whitening cream is easily absorbed and non-greasy, thanks to the addition of SeraSense® SF MTM (Methyl Trimethicone), a volatile emollient, which leaves skin silk y. SeraSo ® SW 70A (Stearyl Dimethicone) promotes lubriicity and facilitates the spreading of actives. Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Hydrogenated Lecithin
0.10
Phospholipon 90H/Lipoid GmbH
Skin Conditioning
Disodium EDTA
0.02
Various
Humectant
Glycerin
3.00
Various
Chelating Agent
Dipropylene Glycol
5.00
Various
Humectant
Glycereth-26
2.00
Liponic EG�1/Lipo Chemical
Humectant
Xanthan Gum
0.10
Keltrol-F/CP Kelco
Thickener
Ammonium Acryloyldimethyltaurate/VP Copolymer
0.50
Aristoflex AVC/Clariant
Thickener
5.0 0
Floramac® Macadamia Oil/ Floratech
Moisturising
Phase A
Phase B Macadamia Intergrifolia Seed Oil Jojoba Esters
2.00
Floraester 30/Floratech
Moisturising
Stearyl Dimethicone
2.00
SeraSof® SW 70�A/KCC Beauty
Moisturising
Arachidyl Alcohol (and) Behenyl Alcohol (and) Arachidyl Glucoside
3.00
Montanov 202/Seppic
Emulsifier
Glycerol Stearate (and) PEG�100 Stearate
1.50
Arlacel™ 165/Croda
Emulsifier
Cetearyl Alcohol
1.50
Lanette O/Cognis
Emulsifier
Tocopheryl Acetate
0.10
Vitamin E Acetate/Various
Skin Conditioning
Phase C Dimethicone
8.00
SeraSense® SF 6/KCC Beauty
Moisturising
Methyl Trimethicone
5.00
SeraSense® SF MTM/KCC Beauty
Emollient
2.00
RonaCare Nicotinamide/Merck
Whitening
Phase D Niacinamide Phase E Phenoxyethanol
0.40
Various
Preservative
Parfum (Fragrance)
0.12
Vitamin 248 Fragrance/Givaudan
Fragrance
Polyacrylate-13 (and) Polyisobutene (and) Polysorbate 20
0.70
Sepiplus 400/Seppic
Thickener
Appearance: White, viscous cream Viscosity @ 25°C: 350000 – 450000cP (Brookfield LVDV II, Sp4, 1rpm) pH @ 25°C: -
• • • • •
Mix the ingredients of Phase A until homogenous. In a separate vessel, mix the ingredients of Phase B. Add B to A and stir until homogenous. Premix Phase C and add to the main vessel. Add Phase D. Premix Phase E and add to the main vessel.
Croda Givaudan Azelis Surfachem Schülke Seatons Seppic A&E Connock Inolex Protec Ingredia IMCD Floratech Univar BASF Asahi Denka Solabia
British Salt Lipo Chemical Nikko Olvea Elementis Specialities DSM Choice Trade Ashland Tennants Clariant Cornelius Lipoid GmbH CP Kelco Cognis Merck
Guide Formulation Skin Care
This whitening cream is easily absorbed and non-greasy, thanks to the addition of SeraSense® SF MTM (Methyl Trimethicone), a volatile emollient, which leaves skin silk y. SeraSo ® SW 70A (Stearyl Dimethicone) promotes lubriicity and facilitates the spreading of actives. Raw Material/INCI Name
% w/w
Trade name/Supplier
Function
Aqua (Water)
To 100
-
Vehicle
Hydrogenated Lecithin
0.10
Phospholipon 90H/Lipoid GmbH
Skin Conditioning
Disodium EDTA
0.02
Various
Humectant
Glycerin
3.00
Various
Chelating Agent
Phase A
Dipropylene Glycol
5.00
Various
Humectant
Glycereth-26
2.00
Liponic EG�1/Lipo Chemical
Humectant
Xanthan Gum
0.10
Keltrol-F/CP Kelco
Thickener
Ammonium Acryloyldimethyltaurate/VP Copolymer
0.50
Aristoflex AVC/Clariant
Thickener
Macadamia Intergrifolia Seed Oil
5.0 0
Floramac® Macadamia Oil/ Floratech
Moisturising
Jojoba Esters
2.00
Floraester 30/Floratech
Moisturising
Stearyl Dimethicone
2.00
SeraSof® SW 70�A/KCC Beauty
Moisturising
Arachidyl Alcohol (and) Behenyl Alcohol (and) Arachidyl Glucoside
3.00
Montanov 202/Seppic
Emulsifier
Glycerol Stearate (and) PEG�100 Stearate
1.50
Arlacel™ 165/Croda
Emulsifier
Cetearyl Alcohol
1.50
Lanette O/Cognis
Emulsifier
Tocopheryl Acetate
0.10
Vitamin E Acetate/Various
Skin Conditioning
Phase B
Phase C Dimethicone
8.00
SeraSense® SF 6/KCC Beauty
Moisturising
Methyl Trimethicone
5.00
SeraSense® SF MTM/KCC Beauty
Emollient
2.00
RonaCare Nicotinamide/Merck
Whitening
Phenoxyethanol
0.40
Various
Preservative
Parfum (Fragrance)
0.12
Vitamin 248 Fragrance/Givaudan
Fragrance
Polyacrylate-13 (and) Polyisobutene (and) Polysorbate 20
0.70
Sepiplus 400/Seppic
Thickener
Phase D Niacinamide Phase E
Appearance: White, viscous cream Viscosity @ 25°C: 350000 – 450000cP (Brookfield LVDV II, Sp4, 1rpm) pH @ 25°C: -
• • • • •
Mix the ingredients of Phase A until homogenous. In a separate vessel, mix the ingredients of Phase B. Add B to A and stir until homogenous. Premix Phase C and add to the main vessel. Add Phase D. Premix Phase E and add to the main vessel.
Croda Givaudan Azelis Surfachem Schülke Seatons Seppic A&E Connock Inolex Protec Ingredia IMCD Floratech Univar BASF Asahi Denka Solabia
British Salt Lipo Chemical Nikko Olvea Elementis Specialities DSM Choice Trade Ashland Tennants Clariant Cornelius Lipoid GmbH CP Kelco Cognis Merck
For more information on KCC Beauty, please contact us as below. Basildon Chemical Co. Ltd., Kimber Road, Abingdon, Oxfordshire, OX14 1RZ
Tel: +44 (0) 1235 526677 Fax: +44 (0) 1235 524334 e-mail:
[email protected]
344, Sapyeeong-daero, Seocho-gu, Seoul, Korea
Tel: +82 2 3480 5000 Fax: +82 2 3480 5436 e-mail:
[email protected]
Please note that the formulations in this booklet are only intended as a guide. They are not commercial formulations and have not been tested as such. The formulations should be evaluated and modified for your own requirements before use. Also suggestions of uses should not be taken as inducements to infringe any particular patent.