Huawei Certification Training Catalog (Subcontractors) V1.2

Huawei Certification Training Catalog Partner

Huawei Certification T Training raining Catalog Partner

COMMERCIAL IN CONFIDENCE

1


HUAWEI Learning Service 2013


2


HUAWEI Learning Service 2013


2


1

2

IP Technology echnology Certificat Certification ion Training Training ...................................................................................................................... 5 1.1

HCDA-HNTD (Huawei Certified Datacom Associate-HuaWei Associate-HuaWei Networking Technologies and Device) Device)

Training

5

1.2

HCDP-BCRN (Huawei Certified Datacom Professional-Building Professional-Building Carrier Routing Network) Training ........ 6

1.3

HCDP-BCAN (Huawei Certified Datacom Professional-Building Carrier Access Network) Network) Training....... ... 7

1.4

HCDP-BITN (Huawei Certified Datacom Professional-Building IP Telecom Telecom Network) Training...... ...... ..... 8

1.5

HCIE (Huawei Certified Internetwork Expert-Improve Expert-Improve Carrier Network Performance) Performance) Training..... Training..... ...... ...... 9

Cloud Computing Computing Certificat Certification ion Training Training ................................................................................................................ 11 11 2.1

3

4

HCNA-HCTD (Huawei Certified Network Associate- Huawei Cloud Technologies and Device) Training.. 11

LTE Certificatio Certification n Training Training ....................................................................................................................................12 3.1

HCNA-LTE (Huawei Certified Network Associate — LTE) Training Training........................................................12

3.2

HCNP-LTE HCNP-LTE (Huawei Certified Network Professional — LTE) Training Training....................................................13

3.3

HCNP-EPC (Huawei Certified Network Professional — EPC) EPC) Training Training..................................................14

Access Network Network...... ...... ...... ...... ...... ........... ..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ........... ..... ...... ...... ...... ...... ...... ....15 4.1

Huawei Certified Network Associate-Huawei Associate-Huawei Access Network Technologies Technologies and Device Training Outline 15

5

4.2

Huawei Certified Network Professional-Huawei Access Network Technologies Technologies and Device Training

Outline

15

Optical Optical Network Network ..................................................................................................................................................16 5.1

Huawei Certified Network Associate-Huawei Associate-Huawei Optical Network Technologies Technologies and Device Training Outline 16

5.2

Huawei Certified Network Professional-Huawei Optical Network Technologies Technologies and Device Training Outline 16

6

7

Microwave Microwave Product Product ............................................................................................................. ................................17 6.1

Huawei Certified Network Associate-Huawei Associate-Huawei Microwave Technologies Technologies and Device Training Outline ...... .17

6.2

Huawei Certified Network Professional-Huawei Microwave Technologies Technologies and Device Training O utline ...18

Mobile Soft Switch Switch ..............................................................................................................................................19 7.1

Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device Training Outline 19

8

9

7.2

Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies Technologies and Device Training

Outline

20

NGN...................................................................................................................................................................22 8.1

Huawei Certified Network Associate-Huawei NGN Technologie Technologies s and Device Training Outline........ ...... ..22

8.2

Huawei Certified Network Professional-Huawei NGN Technologies Technologies and Device Training Outline ... ...... ..24

MGW&SBC MGW&SBC ........................................................................................................................................................25 9.1

10

11

Huawei Certified Network Associate-Huawei Associate-Huawei MGW&SBC Technologies Technologies and Device Training Outline .....25

USC ...................................................................................................................................................................27 10.1

Huawei Certified Network Associate-Huawei USC Technologies Technologies and Device Training Outline ...... ...... ....27

10.2

Huawei Certified Network Professional-Huawei USC Technologies Technologies and Device Training Outline ...... ...... 28

SG .....................................................................................................................................................................29 11.1

Huawei Certified Network Associate-Huawei SG Technologies Technologies and Device Training Outline ......... ...... ...29


3


11.2 12

13

14

15

GSM ..................................................................................................................................................................31 12.1

Huawei Certified Network Associate-Huawei GSM Technologies Technologies and Device Training Outline ..... ...... ....31

12.2

Huawei Certified Network Professional-Huawei GSM Technologies Technologies and Device Training Outline ....... ....32

WCDMA.............................................................................................................................................................33 13.1

Huawei Certified Network Associate-Huawei Associate-Huawei WCDMA Technologies Technologies and Device Training Outline ...... ....33

13.2

Huawei Certified Network Professional-Huawei WCDMA Technologies Technologies and Device Training Outline ......34

CDMA CDMA ........................................................... .....................................................................................................35 14.1

Huawei Certified Network Associate-Huawei Associate-Huawei CDMA Technologies Technologies and Device Training Outline .. ...... .....35

14.2

Huawei Certified Network Professional-Huawei CDMA Technologies Technologies and Device Training Outline ...... ...37

Wimax................................................................................................................................................................39 15.1

16

17

18

19

20

21

22

23

Huawei Certified Network Professional-Huawei SG Technologies Technologies and Device Training Outline ...... ...... ..30

Huawei Certified Network Professional-Huawei Wimax Technologies Technologies and Device Training Outline.... .....39

GSM RNP&RNO RNP&RNO ................................................................................................................................................40 16.1

Huawei Certified Network Associate- Huawei GSM RNP&RNO Technology Technology Training Training Outline ........ ...... ...40

16.2

Huawei Certified Network Professional - Huawei GSM RNP&RNO Technology Technology Training Outline ...... ...... 41

WCDMA RNP&RNO RNP&RNO ...........................................................................................................................................42 17.1

Huawei Certified Network Associate-WCDMA RNP&RNO Training Outline ...........................................42

17.2

Huawei Certified Network Professional-WCDMA RNP&RNO Training Outline .......................................42

CDMA CDMA RNP&RNO RNP&RNO .............................................................................................................. ................................43 18.1

Huawei Certified Network Associate-Huawei Associate-Huawei CDMA RNP&RNO Technologies Technologies Training Outline ....... ...... 43

18.2

Huawei Certified Network Professional-Huawei CDMA RNP&RNO RNP&RNO Technologies Technologies Training Outline ......... 44

Microwave Microwave RNP ..................................................................................................................................................46 19.1

Huawei Certified Network Associate-Huawei Associate-Huawei Microwave RNP Technologies Technologies Training Outline ...... ...... .....46

19.2

Huawei Certified Network Professional-Huawei Microwave RNP Technologies Technologies Training O utline...... ...... .47

Site and Power Power System System.......................................................................................................................................48 20.1

Huawei Certified Network Associate- -Huawei Site and Power System Technology and Device Training

Outline

48

Hybrid Hybrid Power Power Supply Supply ..........................................................................................................................................49 21.1

Huawei Certified Network Associate- Huawei Hybrid Power Supply Technology and Device Training

Outline

49

Hardware Hardware Installation Installation Supervision Supervision (excluding (excluding RF products) products) ..................................................................................49 22.1

Huawei Certified Network Associate-Hardware Associate-Hardware Installation Supervision (excluding RF products) Training

Outline

49

Hardware Hardware Installation Installation Supervision Supervision (including (including RF products) products) ...................................................................................50 23.1

Huawei Certified Network Associate-Hardware Associate-Hardware Installation Supervision (including RF products) Training

Outline

50


4

1

IP Technology Certification Training

1.1 HCDA-HNTD (Huawei Certified Datacom Associate-HuaWei Networking Technologies and Device) Training Training Path



Describe TCP/IP model, the function of each layer, the function and the working principle of

HCDA-HNTD (Huawei Certified Datacom Associate-Huawei Networking Networking Technologies Technologies and Device) exercise ODC01 Lecture, Hands-on exercise

8d

some common protocols 

Describe ICMP working principle



Describe Router and Switch working principle



Describe the basic basic principle principle and configuration configuration of VLAN, STP, VRRP, VRRP, Static Stat ic Route, Ro ute, RIP, OSPF, OSPF,

Target Audience This program is intended for those who are to be

PPP, Frame Relay 

subnetting technology

certified by HCDA exam

Prerequisites

Design IP addresses with IP address



Apply ping, tracert in network maintenance and basic troubleshooting



Be familiar with Windows operating operating system system



Know the basic function and conception of computer network

Objectives On completion of this program, the participants will be able to: 

Describe the hierarchical hierarchical structure structure of IP network and the function of each layer



Describe Ethernet evolution evolution and relative technology





Configure Confi gure IP address, VLAN, VRRP, VRRP, Static Route，RIP，OSPF in VRP platform



Locate and handle the simple simple fault



Choose Huawei Huawei routers for each each layer of of IP network

Duration 8 working days

Class Size Min 6，max 12

Outline network security and firewall firewall concepts concepts


5

1.2 HCDP-BCRN (Huawei Certified Datacom Professional-Building Carrier Routing Network) Training Training Path

MP-BGP for IPv6 

HCDP-BCRN (Huawei Certified Datacom

platform and use BGP route attributes and

Professional-Building Carrier Routing Network) ODC02 Lecture, Hands-on exercise

Configure BGP/MP-BGP for IPv6 in VRP route policy to select and filter routing in large

9d


network based on demand 

BGP route reflector and confederation 

Describe the BGP multi-homed basic concepts and application scenarios

certified by the HCDP-BCRN exam

Prerequisites

Describe the working principle and function of



Troubleshoot the BGP peer establishtion failures,routing learning failures and path



Have got the HCDA certification or have equivalent technical level

selection failures 

Objectives

tools(Access control list,ip-prefix,as-path-filter,community-filter,route

On completion of this program, the participants will

-policy)

be able to: 

Flexibly apply the VLSM technique to design IP



Flexibly apply the CIDR technique to aggregate



Describe the IPv6 basic packets and the IPv6



Describe the basic protocol of IPv6 (ICMPv6,



Describe the working principle of OSPFv2/v3



Describe several OSPF special areas



Troubleshoot OSPF neighbor relationship failures and routing failures



Describe the working principle of ISIS routing protocol in IPv4 and IPv6



Troubleshoot ISIS common neighbor relations failure and routing failures



and service requirement to build the large network and deploy the service 

Locate and remove routing problems in large scale IP network


Class Size

Configure OSPF and ISIS in VRP platform to realize the IP connectivity of the large network



Select the appropriate Huawei middle and high end routers based on t he device performance

routing protocol 

Describe NE80E/NE40E and NE40E-X series hardware features

ND, IPv6 address allocation protocol) 

Describe NE5000E/NE5000E-X16 series hardware features

address structure 

Configure IGMP/PIM-SM/PIM-DM in VRP platform

the routes 

Describe the working principle of multicast protocol(IGMP,PIM-SM,PIM-DM)

addresses 

Flexibly apply the common route selection

Min 6，max 12

Describe the working principle of BGP and


6

1.3 HCDP-BCAN (Huawei Certified Datacom Professional-Building Carrier Access Network) Training Training Path



Configure VLAN, GVRP, QinQ, STP, RSTP, MSTP in VRP platform

HCDP-BCAN (Huawei Certified Datacom



Professional-Building Carrier Access Network) ODC03 Lecture, Hands-on exercise

implement user isolation and service

6d


transportation 

Apply STP, RSTP, MSTP in access network to avoid loop



Deploy PPPoE, IPoE, IPoEoVLAN in access network

certified by HCDP-BCAN exam

Prerequisites

Apply VLAN, GVRP, QinQ to access network to



Perform the troubleshooting about VLAN, GVRP, QinQ, STP, RSTP, MSTP, PPPoE, IPoE,




Objectives On completion of this program, the participants will be able to: 

Describe the working principle of VLAN, GVRP,

IPoEoVLAN in access network 

Choose appropriate Huawei switches and BRAS devices in access network deployment


Class Size

QinQ, STP, RSTP, MSTP 

Describe the working principle of PPP, PPPoE,

Min 6，max 12

IPoE, IPoEoVLAN


7

1.4 HCDP-BITN (Huawei Certified Datacom Professional-Building IP Telecom Network) Training Training Path

principles of the MPLS BGP VPN 

HCDP-BITN (Huawei Certified Datacom

to realize the connectivity of the different sites

Professional-Building I P Telecom Network) ODC04 Lecture, Hands-on exercise

Configure the MPLS BGP VPN in VRP platform



7d

Target Audience

Configure the MPLS BGP VPN in the single domain of the large I P bearer network to realize private network users to access Internet



Master the troubleshooting methods of the

This program is intended for those who are to be

MPLS BGP VPN in control plane and dat a

certified by the HCDP-BITN exam

plane

Prerequisites



Describe the working principle and the four components of MPLS TE






Configure MPLS TE in VRP platform



Describe the basic concepts of QoS and the

Objectives On completion of this program, the participants will

different QoS models 

classification and marking,traffic policy and

be able to: 

shaping,congestion management and

Describe the features and performance of IP

avoidance,link efficiency m echanisms,etc

bearer network 

Describe the basic principle of MPLS



Describe the basic process of MPLS data forwarding



Describe the basic concepts and principles of the MPLS LDP



Description the MPLS LDP label management

Describe the IP QoS technologies, such as



Describe the basic principle of the common HA technologies, such as NSR, BFD, protection switching technologies and VRRP


Class Size

mechanism and the loop protection mechanism 

Configure MPLS LDP in VRP platform



Describe the basic concepts and basic


Min 6，max 12

8

1.5 HCIE (Huawei Certified Internetwork Expert-Improve Carrier Network Performance) Training Training Path

Target Audience

Advanced Routing Features Principle and

This program is intended for those who are to be

Configuration

certified by the HCIE exam

ODC05

Lecture, Hands-on exercise

2d

Prerequisites 

Advanced MPLS VPN Features Principle

equivalent technical knowledge level

and Configuration ODC06

Have got the HCDP certification or have the


7d

Objectives On completion of this program, the participants will be able to:

Multicast Features Principle and Configuration ODC07




features

1d 




Configure NE5000E/80E/40E advanced routing features

QoS Features Principle and Configuration ODC08

Describe NE5000E/80E/40E advanced routing

Troubleshoot NE5000E/80E/40E advanced routing features

1d 

Describe MAN typical network structure and routing design features

HA Features and Configuration ODC09


2d



Deploy routing protocol in MAN



Optimize routing protocol deployment in MAN



Troubleshoot the typical Failure of routing protocol in MAN

BRAS Access Service Features and



Realization ODC10


Describe NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features

2d



Configure NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features

IP MAN Design and Service Deployment



Troubleshoot NE5000E/80E/40E advanced MPLS L3VPN and L2VPN features

ODC11


4d



Describe IGMP principle and configuration



Describe PIM-SM principle and configuration

IP Bearer Network Design and Service



Describe PIM-SSM principle and configuration

Deployment



Analyse MSDP basic working principle



Describe MSDP RPF detection



Describe MSDP application



Describe Multicast VPN function and technical

ODC12


4d

HCIE Simulation Lab Examination

solution ODC13

exercise

2d



Describe MD VPN concepts and working principle


9



Configure and troubleshoot MD VPN



Describe the QoS technology



Configure and adjust BGP in MAN



Configure QoS in the NE series routers



Describe the devices and interfaces of core



Analyse and troubleshoot the common faults of QoS configuration in the NE series routes



network 





Describe the HQoS realization and application



Describe HA basic concepts and HA



Describe BFD principles and typical



Describe NSR principle



Describe the various protection switching technology and in NE5000E80E40E product











IP bearer network



Configure fast convergence of routing protocols

Describe ME60&ME60-X series products



Configure MPLS TE FRR and VPN FRR technologies of IP bearer network backbone

Describe ME60&ME60-X series products



Describe the function of BRAS related

Analyse the ME60 PPP service working

Configure GR technologies of IP bearer network



Describe different QoS requirement of different services in IP bearer network



Describe end to end QoS realization in IP bearer network

process 

Analyse the ME60 IP service working process



Configure end to end QoS in IP bearer network



Analyse the ME60 Leased line service working



Help candidates to be familiar with examination

process 

Configure fast detection technologies of IP bearer network

Describe end-to-end HA features realization in

components 

Configure IGP/BGP and VPN of IP bearer core network

Features 

Describe the GR technologies of IP bearer network

hardware 

Describe the MPLS TE FRR and VPN FRR technologies of IP bearer network backbone

applications 

Describe the fast convergence of routing protocols

classification 

Configure HA features of IP bearer core network

Describe the HQoS scheduling process in NE5000E80E40E

Describe the solutions of IP bearer network access part

Describe the HQoS working principle in NE5000E80E40E



MAN

Describe the ME60 Multicast Feature and Realization 

Describe IGP deployment in MAN



Describe IGP fast convergence deployment in MAN



Configure and adjust OSPF/ISIS in MAN



Describe BGP deployment in MAN



Describe BGP RR deployment in MAN



Describe route control and route selection in IP


mode,examination rules, and examination environment


Class Size Min 2，max 6

10

2

Cloud Computing Certification Training

2.1 HCNA-HCTD (Huawei Certified Network Associate- Huawei Cloud Technologies and Device) Training Training Path

IT Foundation for Cloud Computing Training (Optional) DC03

Lecture, Hands-on

Fundamentals of Cloud Computing Training Lecture

DC02

Desktop Cloud Administration Training DC05

Lecture, Hands-on

Target Audience This training program is intended for t hose who are to take the HCNA certification exam.

Prerequisites 

Be familiar IT foundation knowledge.

Objectives After the completion of this program, participants will be able to: 

Describe Active Directory Service.



Describe Dynamic Host Configuration Protocol.



Describe Domain Name Service.



Describe the Linux File System Structure.



Performing Linux Directory Operations.



Performing Linux File Operations.



Administering User Account.



Performing System Resources Management.



Performing Basic Network Configuration.



Describe the hierarchical structure of an IP network and the functions of each layer.




Describe Cloud Computing Use Cases.



Describe Cloud Computing Key Characteristics.



Describe the Basic Concepts of Server Virtualization.



Describe the Basic Concepts of Network Virtualization.



Describe the Basic Concepts of Storage Virtualization.



Describe the Basic Concepts of Cloud Storage.



Identify the Storage Access Protocols.



Describe the RAID Features.



Describe Backup and High Availability for Storage.



Describe the Position of Galax in SingleCLOUD.



Describe the Components of Galax.



Describe the Features of Galax.



Describe the Server Architecture.



Describe the Server PCBs.



Describe the Server Switch PCB.



Describe the Server Management PCB.



Describe the Features of Server.



Describe the Features of Storage Product.



Describe the Storage Architecture.



Describe the Storage Specification.



Describe the Features of Switch Product.



Describe the Switch Architecture.



Describe the Switch Specification.



Describe Galax8800 Operating System.



Performing System Login.



Performing System Management.



Performing Server Management.



Performing System Configuration.



Performing Virtualization Operations.



Viewing System Message.



Viewing System Alert.



Viewing System Log.



Understand the Management Port Features.



Performi ng Common Management Tasks.



Understand OceanStor Management Port Features.



Understand OceanStor Management Features.

11



Performi ng Common OceanStor Management Tasks.



Perform VDesktop6000 system backup.



Understand Switch Management Port Features.



Perform VDesktop6000 performance management.



Understand Switch Management Features.



Describe TCs Terminal Types.



Performi ng Common Switch Management Tasks.



Describe TCs Characteristics.



Describe VDesktop6000 networking.



Understand TC Configuration and Management.



Describe VDesktop6000 structure and functions.



Describe VDesktop6000 service flow.



Perform VDesktop6000 count management.



Perform VDesktop6000 asset management.



Perform VDesktop6000 DDC management.

3

Duration 9 workdays ( 2 days, optional + 7 days)

Maximum Class Size 12 persons

LTE Certification Training

3.1 HCNA-LTE (Huawei Certified Network Associate — LTE) Training Training Mode HCNA-LTE (Huawei Certified Network Associate-LTE) Training Lecture, Hands-on

6d

Target Audience This training program is intended for t hose who are



Huawei eNodeB product family and applications



Basic operation about Huawei eNodeB



Basic concepts of the EPC



LTE/EPC network architecture



Interfaces and protocols used in the EPC



EPC security mechanism



EPC QoS mechanism



Procedures of bearer establishment, update, and

to take the HCNA-LTE certification exam and those who hope to l earn about basic LTE/SAE principles

release 

and Huawei LTE equipment.

Prerequisites 

Be familiar with basic wireless communication principles

Objectives After the completion of this program, participants will be able to understand: 

Basic pinciple of LTE air interfaces


Concepts and procedures related to EPC mobility management



Concepts and procedures related to EPC session management

Duration 6 workdays


12

3.2 HCNP-LTE (Huawei Certified Network Professional — LTE) Training Training Mode



Understand functions of different layers in LTE air interface

HCNP-LTE (Huawei Certified Network Professional-LTE) Training Lecture, Hands-on



Understand functions and procedures of X1/S2 interface



Understand typical procedures in LTE such as handovers

10d 

Target Audience

managing eNodeB alarms, tracing signaling, manage eNodeB software, managing real-time monitoring and

This training program is intended for t hose who are

etc.

to take the HCNP-LTE certification exam and those who hope to l earn about detailed LTE principles



Perform initial configuration and reconfiguration of HUAWEI LTE eNodeB

and Huawei LTE equipment.

Prerequisites

Perform Operations for HUAWEI LTE eNodeB such as



Perform eNodeB troubleshooting

Duration 

Be familiar with basic LTE principles

Objectives

10 workdays

Maximum Class Size After the completion of this program, participants will be able to: 

Understand structure of LTE /EPC



Understand detailed principle of LTE air interface


16 persons

13

3.3 HCNP-EPC (Huawei Certified Network Professional — EPC) Training S-GW, DNS, NTP

Training Mode 

HCNP-EPC (Huawei Certified Network Professional-EPC) Training Lecture, Hands-on

session management 

12d

Target Audience

Perform configuration of mobility management and

Describe system structure and hardware structure of UGW9811



Perform software related installation and upgrade procedure

This training program is intended for t hose who are to take the HCNP-EPC certification exam and



Perform hardware operation and maintenance.



Perform the routing operation and maintenance

those who hope to learn about detailed EPC

including authorization management, system

principles and Huawei EPC equipments.

information management, alarm management, trace

Prerequisites 



management ,patch management ,data b ackup and

Be familiar with basic EPC principles

Objectives



management ,log management, license restore 

Perform data configuration of S1-U&S11,S5S8 and SGi

After the completion of this program, participants

interfaces .Describe basic concept of VPN,APN and

will be able to:

charging

Describe system structure and hardware structure of



Perform configuration of VPN ,APN and charging

USN9810



Describe the DPI principles ,content based charging principles and PCC concepts

Perform software related installation and upgrade procedure



Perform configuration of the DPI function, service control function and PCC



Perform hardware operation and maintenance



Perform the routing operation and maintenance



Describe HSS9820 product function and application

including security management, system information



Perform HSS9820 configuration of subscription data.

management, alarm management, trace management ,



Describe the steps of HSS9820 data configuration.

data management, license management ,performance



Perform HSS9820 hardware and system data

management 

Describe the functions of protocol stacks of different interfaces



configuration. 

Perform HSS9820 interface data configuration.

Duration

Perform configuration of USN hardware, System Information, interworking with eNodeB, HSS, MME,


12 workdays

14

Maximum Class Size

4

16 persons

Access Network

4.1 Huawei Certified Network Associate-Huawei Access Network Technologies and Device Training Outline Training Mode

will be able to:

Huawei Access Network

Technologies and

Device Training Lecture, Hands-on

11 d



Understand xDSL/ATM/GPON/EPON/DataCom theory.



Be familiar with hardware construction, features, board types, functions and i nterfaces



Know how to install/commission/configure access equipment hardware.

Target Audience This training program is intended f or those who hope to learn about basic access network theory.

Prerequisites



Perform upgrade task under CLI of equipment.



Be familiar with HSI、IPTV、VOIP acceptance test.



Understand basic theory of NMS and SNMP, can use NMS add and monitor equipment.



Be familiar with windows operation system.



Know well about computer network



Understand basic data communication theory



Understand basic fiber communication theory

Duration 11 workdays Maximum Class Size 16 persons

Objectives After the completion of this program, participants

4.2 Huawei Certified Network Professional-Huawei Access Network Technologies and Device Training Outline Training Mode

Target Audience This training program is intended f or those who

H Huawei Access Network Technologies and Device Training Lecture, Hands-on

expect to learn mor e about the Access network commissioning, maintenance and troubleshooting

13d

Prerequisites 

Function well on maintenance and commissioning of Huawei equipments


15



Be familiar with access network communication theory



migration and the usage of the migration tools

Objectives 


database commands for troubleshooting of access

Be familiar with HSI、IPTV、VOIP test item and test

products.

function. 

Be familiar with NMS installation, basic NMS service configuration, NMS operating system and basic

will be able to: 

Be familiar with the typical solutions for Access Network

Duration

Be familiar with problem locating on 13 workdays

xDSL/ATM/GPON/EPON 

Maximum Class Size

Be familiar with problem maintenance of access network products.



16 persons

Perform data plan and network design for FTTx.

5

Optical Network

5.1 Huawei Certified Network Associate-Huawei Optical Network Technologies and Device Training Outline Training Mode



Understand SDH/WDM/data communication theory.



Be familiar with hardware construction, features, board

Huawei Optical Network Technologies and Device Training Lecture, Hands-on

15 d

Target Audience

types, functions and in terfaces 

Know how to install/commission/configure optical equipment hardware.



Understand DC tool, board-level loading and simulation package loading of software.

This training program is intended f or those who want to take the HCNA certification exam and those who hope to learn about basic optical network principles .

Prerequisites 

Be familiar with windows operation system.



Know well about computer network



Understand basic data communication theory



Understand basic fiber communication theory



Be familiar with MSTP/HMSTP/WDM acceptance test.



Understand basic theory of NMS and SNMP, can use NMS add and monitor equipment.

Duration 15 workdays


Objectives After the completion of this program, participants will be able to:

5.2 Huawei Certified Network Professional-Huawei Optical Network Technologies and Device Training Outline


16

Training Mode

will be able to:

Huawei Optical Network Technologies and Device Training Lecture, Hands-on

10 d



Be familiar with MSTP/WDM test item and test function.



Be familiar with OAM/QoS feature and function of MSTP



Be familiar with problem locating on SDH/WDM



Be familiar with problem maintenance of optical network

Target Audience

products.

This training program is intended f or those who



planning of optical product.

want to take the HCNP certification exam and personnel who expect to learn SDH and WDM



Be familiar with NMS installation, basic NMS service configuration, NMS operating system and basic

network commissioning, maintenance and network

database commands for troubleshooting of optical

reconstruction

products.

Prerequisites 

Be familiar with data collection and basic service

Duration

Function well on maintenance and commissioning of

10 workdays

huawei equipments 

Maximum Class Size

Be familiar with optical network communication theory

Objectives

16 persons


6

Microwave Product

6.1 Huawei Certified Network Associate-Huawei Microwave Technologies and Device Training Outline Training Mode


Describe the concept and characters of digital microwave communication.

Huawei Microwave Technologies and Device Training Lecture, Hands-on



9d

Describe the theory and function of every parts in the digital microwave system.



Target Audience

List the networking application for digital microwave systems.



Describe the Ethernet basic knowledge.

to take the HCNA-HMTD certification exam and



Describe the main characteristics of OptiX RTN 600.

those who hope to l earn about Huawei microwave



Describe the system structure, function and application


of every unit in RTN 600.

equipment operation and maintenance.

Prerequisites



List out the 1+1 protection technology in OptiX RTN 600 hybrid microwave network.



Be familiar with the Windows operating system.



Know basic functions of the computer network.



Describe the main characteristics of OptiX RTN 900.



Describe the system structure, functions and application

Objectives After the completion of this program, participants


of every unit in RTN 900. 

Describe the networking application under PDH/SDH

17



and hybrid microwave modes.



List the routine maintenance items of OptiX RTN 900.

List out the protection technologies in OptiX RTN 900



Implement the maintenance operation of OptiX RTN

network. 

900.

Describe the features and applications of the protection



Judge the common faulty in OptiX RTN 900.

technologies.



Implement the software upgrade operation of OptiX



List out the installation procedure for RTN equipment.



Finish proper preparations before the commissioning.



Perform site commissioning of the OptiX RTN 900.



Perform system commissioning of the OptiX RTN 900.



Configure radio links of the OptiX RTN 900.



Configure TDM services of the OptiX RTN 900.



Configure Ethernet services of the OptiX RTN 900.



Configure SNCP/MSP/ERPS/ LAG for OptiX RTN 900.



Outline the general safety precautions of OptiX RTN

RTN 900. 

Implement the data collection operation of OptiX RTN 900.



Monitor the RTN equipment via the NMS.

Duration 9 workdays


900.

6.2 Huawei Certified Network Professional-Huawei Microwave Technologies and Device Training Outline Training Mode



Outline the typical PWE3 encapsulation format for TDM, Ethernet and ATM services.



Huawei Microwave Technologies and Device Training Lecture, Hands-on

Outline the PWE3 application scenarios of OptiX RTN 900.

7d

Target Audience



Outline the steps of RTN 900 service configuration in packet plane.



Implement Ethernet service/CES service/ATM/IMA services configuration in packet plane via NMS.

This training program is intended for t hose who are to take the HCNP-HMTD certification exam and those who hope to l earn Huawei microwave equipment.

Prerequisites 



Implement QoS/OAM/Clock configuration via NMS.



Implement the Ethernet service test via smartbits.



Install the U2000 Single-Server System Software.



Describe the system structure of U2000.



Describe the general troubleshooting flow of OptiX RTN 900.

Take the HCNA-HMTD certification

Objectives



Outline the methods of faults analyzing and locating.



Perform the common troubleshooting for OptiX RTN

After the completion of this program, participants will be able to: 

Describe the classification of IP addresses.



Describe the basic principle of IP routing.



Describe the basic concepts of MPLS.



Describe the MPLS tunnel (LSP) creation procedure.



Outline the MPLS OAM functions.



Describe the basic concepts of PWE3.


900. 

Identifying Radio Link Faults.

Duration 7 workdays


18

7

Mobile Soft Switch

7.1 Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device Training Outline Training Mode Target Audience

GSM/UMTS Softswitch Fundamental O

Lecture

MSOFTX3000 Field Maintenance Technicians,

1d

First Line Maintenance Technicians or Routine Maintenance Technicians/Engineers

GSM/UMTS O

CS Commnication Flow Lecture

Prerequisites 2d

None



Objectives MSOFTX3000 Hardware System OWG10

Lecture


1d

MSOFTX3000 Basic Data Configuration O

Lecture, Hands-on

4d


Outline the development of GSM and UMTS.



Describe the architecture of GSM and UMTS system.



Describe the Networking and Interfaces of GSM NSS and UMTS R4.



MSOFTX3000 Routine Operation and Maintenance O

Lecture, Hands-on

technology.

5d



Describe basic call control flows in UMTS R4 network.



Describe various types of bearer establishment in UMTS R4 network.

MSOFTX3000 Delta Training(ATCA) O

Lecture

Describe the fundamental of mobile softswitch

2d



Describe basic calling flow in UMTS R4 network.



Describe the hierarchical structure of an IP network and the functions of each layer.

UMG8900 Routine Operation and Maintenance O

Lecture, Hands-on



Describe the MSOFTX3000 system structure, functions, and key characteristics(CPCI).

2d



Describe the function, indicators, ports and working mode of each board(CPCI).

UMG8900 Hardware System OWH10

UMG8900 O

Lecture



Lecture, Hands-on

cables(CPCI).

1d

Software&Patch Loading



Describe the toggle switch in MSOFTX3000(CPCI).



Perform operation through LMT(CPCI).



Describe MSOFTX3000 data configuration method and procedure(CPCI).

1d 



Lecture, Hands-on


Edit the data configuration scripts of MSOFTX3000(CPCI).

UMG8900 Data Configuration O

Explain the types and applications of different fibers and

Perform hardware data configuration(CPCI).

2d

19



Perofrm local office data configuration.



Perform the data configuration to MGW, RNC, HLR and



Describe the toggle switch in UMG8900.

PSTN.



Perform operation through LMT.



Understand the usage of common commands.



Perform UMG8900 Software&Patch Loading



Perform system data backup and restoration.



Describe the UMG8900 data configuration method and



Perform daily alarm and statistic management task.



Understand the operation flow of parts replacement and



Edit the data configuration scripts for UMG8900.

implementing technical protection measures.



Execute the data configuration script.

Perform MSOFTX3000 parts replacement and check



Perform the dynamic data configuration and



cables.

procedure.

the components running status. 

Manage tracing tasks.



Perform the routine operation and maintenance tasks (daily, weekly and monthly).







Perform system data backup and restoration, execute MML commands, etc.



Understand the operation flow of parts replacement and implementing technical protection measures.



Perform UMG8900 parts replacement and check the components running status.

and key characteristics(ATCA).




Describe the function, indicators, ports and working



Monitor alarms of UMG8900.

mode of each board(ATCA).



Perform the routine operation and maintenance tasks




Describe the toggle switch in MSOFTX3000(ATCA).



Perform operation through LMT(ATCA).



Describe MSOFTX3000 data configuration method and procedure(ATCA).

(daily, weekly and monthly). 

Understand troubleshooting procedure and common troubleshooting methods.



Perform common hardware, interfaces, service troubleshooting.



Perform UMG8900 software&Patch reloading and path

Edit the data configuration scripts of

upgrading

MSOFTX3000(ATCA).

Duration



Perform hardware data configuration(ATCA).



Describe the UMG8900 system functions, structures and key characteristics.





Describe the MSOFTX3000 system structure, functions,

cables(ATCA).



Perform UMG8900 system data, interfaces data and resource data configuration.






Understand troubleshooting procedure and common troubleshooting methods.



modification.

21 work days

Maximum Class Size

Describe the function, indicators, ports and working

16 persons

mode of each board. 


7.2 Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and Device Training Outline


20

Training Mode



Perform the dynamic data configuration and modification.

MSOFTX3000 Emer enc Maintenance



Understand deeply number analysis concepts and working principle in MSOFTX3000.

OWG36

Lecture, Hands-on

1d



Perform number analysis configuration and testing task, including call barring analysis, failure processing data,

MSOFTX3000 Troubleshooting OWG38

Lecture, Hands-on

equal access data, etc. 

2d

flow in MSOFTX3000. 

MSOFTX3000 Advanced Data

Understand deeply IN service concepts and processing

Perform IN service configuration and testing task, including DP data, SCP data, IN service data, I N

OWG30

Lecture, Hands-on

2d

announcement data, etc. 

MSS Signaling Analysis

flow in MSOFTX3000. 

OWA04

Lecture, Hand-on ractice

Understand deeply IN service concepts and processing

5d

Perform IN service configuration and testing task, including DP data, SCP data, IN service data, IN announcement data, etc.



MSC POOL Training OWG62

Lecture, Case-study

Understand deeply Dual-homing concepts, networking modes and switchover modes in MSOFTX3000.

5d



Use the emergency maintenance tools and platform, and understand d evice and service emergency maintenance procedure.

UMG8900 Emergency Maintenance& Troubleshooting OWH34

Lecture, Hands-on



1d

UMG8900 Fault Location&Networking OWH36

Lecture, Hands-on

Perform complex hardware, interfaces, service troubleshooting.



Describe BSSAP protocol stack and function.



Analysis main procedures of BSSAP (Paging, Initial MS Message, Cipher Mode Control, Assignment, Handover,

5d

Release, DTAP Message).

Target Audience



Describe Iu interface protocol stack and function.

Core network commissioning engineers, operation



Describe classification of RANAP messages.

and maintenance engineers, optimization



Analysis Iu connection Management, RAB assignment, SRNS Relocation

engineers

Prerequisites 

At least two years experience of operation and



CS Domain MM, CC procedures in Iu Interfaces.



Perform protocol stack and main functions of SIGTRAN.



Analysis SCTP association establishment and close

maintenance of GSM NSS/UMTS CS or other telecommunication equipments 

flows. 

A basic knowledge of mobile communication and soft switch principle

Routing key). 


Edit the data configuration scripts of MSOFTX3000.


Describe UA concepts introducti on (AS, SG, IPSP, Entity,

Perform messages analysis of SCTP, M2UA, and M3UA.



Describe H.248 Protocol stack and functions.



Perform message analysis of H.248 based on scenario.



Describe BICC protocol stack and functions.

21



Analysis key parameters of BICC.



Analysis BICC message.



Describe MSC Pool networking.



Perform end-to-end tracing of calls on the MSC Pool.



Describe principles related to the MSC Pool features.



Perform the dynamic data configuration and



between NE and M2000.

modification.

(The load balancing of MSC Pool, Handover in MSC Pool, Disaster tolerance in MSC Pool, Subscriber



Check the data configuration correctness and validity.

migration in MSC Pool, A-Flex by the MGW, Managing



Use the emergency maintenance tools and platform,

A-Interface Circuits on the MGW, Charging based on Virtual MSC IDs or Location Areas). 

Describe MSC Pool configuration flow overview.



Perform MSC Pool feature configuration in MSC Server



Perform MSC Pool configuration synchronization

and understand emergency maintenance procedure. 

Handle UMG8900 device and service fault and perform emergency recovering.



Perform complex hardware, interfaces, signaling,

and MGW.

service networking troubleshooting.

Perform MSC Pool configuration based on different

Duration

scenarios (NNSF implemented by RNC, NNSF implemented by MGW, Restructure MSC Pool based on current network). 

Monitor MSC Pool Load in real time.



Operate performance report of the MSC Pool.



Perform migration of subscribers.

8

21 workdays


NGN

8.1 Huawei Certified Network Associate-Huawei NGN Technologies and Device Training Outline Training Mode

Huawei NGN Primary Training OAX01



20 d

22

Target Audience



UMG8900, and execute the common service data


configuration (TG data configuration, SG data

to take Huawei NGN Primary certification exam

configuration).

and those who hope to learn about basic NGN principles and Huawei NGN equipment.

Outline the service data configuration steps of



Outline the service data configuration steps of MRS6100, and execute the system data configuration

Prerequisites

and the voice file loading.







and execute the common service data configuration

Objectives

(MTP data configuration, M3UA data configuration).






(SNMP data configuration, signaling PROXY and media

Principle Describe the basic concepts, system architecture,

PROXY data configuration). 

services, networking and applications of NGN. 



Maintenance & Troubleshooting 

SoftX3000 (operator authority management, database

stack structure and messages of NGN protocols (MGCP,

backup and restoration, data consistent checking

H.248, SIP, SIGTRAN).

between the host and BAM, log management, alarm management, device management, media gateway

Describe the network topology, services, functions,

management, protocol and signaling management,

system structure, board functions, board indicators,

trunk circuit management, subscriber management, bill

networking, applications and t echnical specifications of

management).

SoftX3000/UMG8900/SG7000/MRS6100/SE2300. 



Describe the network topology, services and functions of U-Path.



Perform the routine operation and maintenance of iGWB.



Basic Data Configuration 

Perform the routine operation and maintenance of

Explain the functions, features, applications, terms,

Product Introduction 

Perform the software installation and the service configuration of U-Path.

Outline the components, services, networking and applications of Huawei U-SYS solution.

Outline the service data configuration steps of SE2300, and execute the common service data configuration

will be able to:



Outline the service data configuration steps of SG7000,

Perform the routine operation and maintenance of UMG8900 (database backup, log management, alarm

Perform the hardware and local office data configuration

management, device management, protocol tracing,

of SoftX3000.

service management).

Perform the hardware data configuration, MGW data




configuration and IP bearer data configuration.

MRS6100 (log management, alarm management,



Perform the hardware data configuration of MRS6100.

device management, message tracing).



Perform the hardware data configuration and local office



SG7000 (database backup, log management, alarm

data configuration of SG7000.

management, device management, signaling tracing).

Data Configuration & acceptance testing 

Outline the service data configuration steps of





SoftX3000, and execute the common service data

SE2300 (log management, al arm management, device

configuration (charging data configuration, media

management, signaling PROXY and media PROXY

gateway data configuration, protocol data configuration,

debugging).

SS7 signaling data configuration, routing data




configuration, trunk data configuration, number analysis

U-Path (log management, system status bro wsing, and

data configuration, subscriber data configuration).

bill management).


23



Maximum Class Size

Perform the common troubleshooting of NGN equipment.

16 persons

Duration 20 workdays

8.2 Huawei Certified Network Professional-Huawei NGN Technologies and Device Training Outline Training Mode



iGWB.

Huawei NGN Secondary Training OAX02

Lecture Hands-on exercise

Describe the system structure and configuration of

11 d

Target Audience



List the means of improving voice quality of NGN.



Describe the working principle and service processing procedure of UMG8900.



Describe the working principle, announcement principle and service processing procedure of MRS6100.

This training program is intended f or those who have pass the Huawei NGN Primary certification exam and those who hope to learn about in-depth

Basic Data Configuration 

(number changing data configuration, call barring data

NGN principles and Huawei NGN equipment.

Prerequisites 



configuration). 



Execute the service data configuration of SG7000 (MTP load sharing data configuration).

At least a half year of experience in the operation and

Data Configuration & acceptance testing

maintenance of NGN

Objectives

Perform the language conversion of voice and voice loading of MRS6100.

Successfully pass the Huawei NGN Primary certification exam

Execute the service data configuration of SoftX3000



Perform data planning and data configuration of NGN dual home.




will be able to: Principle 

Explain the command parameters and call processing

Maintenance & Troubleshooting 

Perform the routine maintenance of NGN dual home.



Perform the common problem analysis and processing

procedure of NGN protocols. 

Describe the principle, application of NGN dual home.



Describe the NGN C4 and C5 office migration solution.

Perform the NGN C4 and C5 office migration operation.

of NGN protocols. 

Perform the troubleshooting of NGN network.

Duration

Product Introduction 

Describe the working principle and service processing procedure of SoftX3000.



Describe the principle, processing procedure, operation and original bill format of NGN charging system


11 workdays


24

9

MGW&SBC

9.1 Huawei Certified Network Associate-Huawei MGW&SBC Technologies and Device Training Outline Training Mode



Know about WCDMA Core Network Evolution and main versions;



NGN/GSM/UMTS Softswitch Fundamental OWA02

Understand the network architecture and function entity of GSM/R99/R4,and the interface and protocol;

Lecture

1d



Understand bearer and control separated architecture;Understand the function and application of

UMG8900 Hardware System OWH10 UMG8900 OWH11

Lecture

MSOFTX3000 and UMG8900;

definition and architecture of NGN and every layer's

1d

functions;Konw about the location of UMG8900 in NGN. 

Software&Patch Loading Lecture, Hands-on

Understand the

Understand SIGTRAN's function,M3UA's basic concepts、function and application;

1d



Understand M2UA's concepts、protocol stacks and main parameters;

UMG8900 Data Configuration



Understand UMG8900's TDM bearer and data configuration of SG(MTP3-M3UA);

OWH30

Lecture, Hands-on

2d



Understand SIGTRAN's function,M3UA's basic concepts、function and application;

UMG8900 Routine Operation and Maintenance OWH22



Lecture, Hands-on

parameters;

2d 



Lecture, Hands-on

2d

Target Audience UMG8900&SBC Field Maintenance Technicians, Maintenance Technicians/Engineers

Prerequisites At least one year experience of operation and maintenance of GSM NSS/UMTS CS or other



Being familiar with Windows operation



A basic knowledge of mobile communications

Objectives On completion of this program, the participants will be able to:


Describe the function, indicators, ports and working mode of each board.



Explain the types and applications of different fibers and cables.



Describe the toggle switch in UMG8900.



Perform operation through LMT.



Perform UMG8900 Software&Patch Loading



Describe the UMG8900 data configuration method and procedure.

telecommunication equipments 

Describe the UMG8900 system functions, structures and key characteristics.

First Line Maintenance Technicians or Routine



Understand UMG8900's TDM bearer and data configuration of SG(MTP3-M3UA);

SE2600 Operation and Maintenance

OZD04

Understand M2UA's concepts、protocol stacks and main



Edit the data configuration scripts for UMG8900.



Execute the data configuration script.



Perform the dynamic data configuration and modification.



Perform UMG8900 system data, interfaces data and resource data configuration.

25



Perform system data backup and restoration, execute



MML commands, etc. 

Understand the operation flow of parts replacement and

Describe related concepts of SBC, working principle of full proxy.



implementing technical protection measures.

Describe main functions and features of SE2600 in IMS network.

Perform UMG8900 parts replacement and check the



Describe call flow analysis.

components running status.



Describe hardware structure of SE2600.






Perform interconnection data configuration.



Monitor alarms of UMG8900.



Perform service data configuration.



Perform the routine operation and maintenance tasks



Perform maintenance tasks for SE2600.

(daily, weekly and monthly).



Perform SE2600 troubleshooting.





Understand troubleshooting procedure and common

Duration

troubleshooting methods. 




Perform UMG8900 software&Patch reloading and path upgrading


9 working days

Class Size max 16

26

10 USC 10.1

Huawei Certified Network Associate-Huawei USC Technologies

and Device Training Outline Training Path

HLR9820V900R006 System Introduction Lecture



List key advantages of Huawei SingleSDB products



Describe HLR9820 hardware structure



Describe all kinds of Buses in ATCA Platform



Describe HLR9820 boards function



Describe connections and cables

2d

Perform System Installation: 

Describe processes of System installation



Describe how Huawei SingleSDB system connected

HLR9820V900R006 System Installation Lecture, Hands-on

internal and external

3.5 d



Perform Huawei HLR9820 system installation



Perform Huawei HLR9820 system debugging Perform system data configuration:

HLR9820V900R006 Data Configuration Lecture, Hands-on

3.5 d



Describe data configuration principles and steps



Describe GSM/UMTS network numbering scheme



Describe HLR9820 system hardware& software configuration procedure and reliable specifications



HLR9820V900R006 Subscriber Data Managemen Lecture, Hands-on

Node and module

1d

Target Audience



Perform Hardware Data Configuration



Perform Local Office Data Configuration



Perform Signaling Data Configuration

SingelSDB GUHLR9820 project installation and

Understand HLR9820 Subscriber Management

configuration Engineers;

Procedure:

Prerequisites 



Describe UMTS Common Service Feature



Perform operation of templates to manage subscribers’

A basic knowledge of mobile communication

Objectives On completion of this program, the participants will

profiles 

Perform operation to manage subscribers’ profiles



Describe the HLR9820 subscriber management method and procedure

be able to: Understand System Structure and Principles: 

Describe the architecture of Huawei SingleSDB system



Describe the Networking and Interfaces of Huawei SingleSDB



Describe the hardware, logical structure of Huawei SingleSDB



Describe HLR9820 basic concept: Site, NE, Cluster,

Describe the typical configurations of SingleSDB



Perform operation to modify services according to the requests from subscribers



Perform Subscriber data management



Perform Operator Management



Perform Network maintenance



Perform operation to Check subscribers’ profiles based on different fault phenomena

products


27

Duration

Class Size

10 working days

10.2

Min 5，max 15

Huawei Certified Network Professional-Huawei USC Technologies

and Device Training Outline


28

Objectives

Training Mode

On completion of this program, the participants will be able to: HLR9820V900R006 IP Resource Planning and Redundancy Solution Lecture 0.5 d



Describe the internal networking and IP planning of HLR9820



Describe Redundancy Principle and Key parameters of configuration



SingleSDB Redundancy System Commissioning Lecture, Hands-on

Describe DS Principle Data synchronization, consistency and Replication Principle

0.5 d



Describe Baseline establishment, increment data synchronization, recovery operation



maintenance

SingleSDB Operation and Maintenance Lecture, Hands-on



3.5 d

Perform Security Management, Alarm Operations, Message Tracing and Performance Operations



Perform Database backup and restoration



HLRV9 Equipment fault information collection and

SingleSDB Maintenance and Troubleshooting Lecture, Hands-on

Perform LMT MML Operation and HLR9820 routine

processing

1d



Procedures and methods of fault location and troubleshooting: Use the system maintenance tools

Target Audience Senior Technical Support Engineer;

Prerequisites 

Successful completion of the program SingleSDB（G/U HLR9820）Engineering Training



Or At least one year experience of HLR9820 operation



Perform system management, cluster management, disk management and Database management


Class Size Min 5，max 15.

11 SG 11.1

Huawei Certified Network Associate-Huawei SG Technologies and

Device Training Outline


29

Training Mode



Describe the basic function of SCCP.



State the format of SCCP message and the meaning of the message which are often used.

Huawei SG Technologies and Device Training 

Lecture Hands-on exercise

5d

Describe the basic concept of SIGTRAN, the structure and signaling procedures of M2PA/M3UA.



Describe SG7000 system structure and hardware architecture, including the cabinet, frame, board and t he

Target Audience

performance features of SG7000. This training program is intended for t hose who are



to take Huawei Certified Network Associate-Huawei SG Technologies and Device certification exam and those who hope t o learn

flow. 

Configure the hardware data, narrowband link data and broadband link data.

about basic SG7000 principles and Huawei SG7000 equipment.

Describe SG7000 logical architecture and signaling



Implement the common operation of maintenance such as message tracing, log management, alarm

Prerequisites

management and link mana gement.






Perform SG7000 client software installation.






Perform SCCP and M2PA data configurati on of

Objectives

SG7000.

Duration After the completion of this program, participants will be able to: 

Describe the basic concepts, architecture, MTP functions of SS7 Signaling System and signaling network.

11.2

5 workdays


Huawei Certified Network Professional-Huawei SG Technologies

and Device Training Outline Training Mode

Huawei SG Technologies and Device Training Lecture Hands-on exercise


2d

30

Target Audience 

Describe the basic principle of MNP service.

have pass the Huawei Certified Network



Perform SG7000 MTP loadsharing data configuration.

Professional-Huawei SG Technologies and Device



Perform SG7000 SCCP loadsharing data configuration.

certification exam and those who hope t o learn



Describe the troubleshooting method of SG7000.

about in-depth SG7000 principles and Huawei



Perform information collection of SG7000 trouble.

SG7000 equipment.



Locate the hardware trouble, link trouble and SCCP

This training program is intended f or those who

Prerequisites 

Successfully pass the Huawei SG7000 Primary certification exam



will be able to:

At least a half year of experience in the operation and

layer trouble.

Duration 2 workdays

Maximum Class Size

maintenance of SG7000

Objectives

16 persons


12 GSM 12.1

Huawei Certified Network Associate-Huawei GSM Technologies



31



GSM Huawei Certified Network

(MBTS)

Associate-Huawei GSM Technologies and Device Lecture, Hands-on

5.Master typical configuration of BTS3900/DBS3900

Engineering survey and hardware installation 

controller and site

11 d 


2.Master the installation design approaches of site controller and site



3.Master the hardware installation approaches of site controller and site (including f eeder system, monitoring,

to take the HCNA certification exam and those who

and other peripherals)

hope to learn about basic GSM principles and

Software Commissioning

Huawei GSM equipment.

Prerequisites

1.Master the engineering survey approaches of site



1.Master the remote and local commissioning approaches of the site







Objectives



2.Master the site integration approaches



3.Master the site service testing approaches



4.Master the using methods of testing tool and know the meaning of testing indicators


Acceptance testing

will be able to: Principles 



1.Master the hardware quality standard



2.Master the acceptance approaches of a single-site

1.Understandable of the basic principle of GSM and

(including service testing)

GPRS technology 

Maintenance and tr oubleshooting

2.Familiar with GSM system architecture and the



1. Master the site operation& maintenance approaches

wireless network interface



2.Capable of independently dealing with hardware

Product knowledge 



1.Master BSC6900 (GSM) system overview, hardware

replacement and information collection of site 

3.Capable of independently dealing with site problems

architecture and product specifications

and emergency recovery on-site

2.Master BTS3900/DBS3900 (GSM) hardware

Duration

architecture and module functions 

3.Master typical configuration of BTS3900/DBS3900

Maximum Class Size

(GSM) 

11 working days

4.Master BTS3900/DBS3900 (MBTS) hardware

20 persons

architecture and module functions

12.2

Huawei Certified Network Professional-Huawei GSM Technologies



32



Huawei Certified Network

2.Understandable of M2000 system architecture and master the operation of client

Professional-Huawei GSM Technologies and Device Lecture, Hands-on

Software Commissioning 

1.Capable of independently finishing data configuration of site controller and site through WebLMT and CME

14 d 

Target Audience

2.Master the software commissioning approaches of the controller




3.Capable of independently finishing new site integration through M2000

to take the HCNP certification exam and those who

Acceptance testing

hope to learn about basic GSM principles and 

Huawei GSM equipment.

1.Master the acceptance approaches of controller Software Upgrade

Prerequisites 







1.Master the local upgrade approaches of the site



2.Master the remote upgrade approaches of the site Maintenance and tr oubleshooting

Objectives



approaches

Compare with “Huawei Certified Network Associate-Huawei GSM Technologies and Device



follows. After the completion of this program, participants will be able to:

2.Capable of independently dealing with hardware replacement and information collection of controller

Training”, the objectives added are shown as 

3.Capable of independently dealing with controller problems and emergency recovery on-site



4. Capable of independently finishing network inspection through NIC and OMSTAR tools

Principles 

1.Master the controller operation& maintenance

Duration

1.Understandable of the signaling process of GSM system

14 working days

Product knowledge 

Maximum Class Size

1.Master CME configuration tool principles and operational guidance

20 persons.

13 WCDMA 13.1

Huawei Certified Network Associate-Huawei WCDMA

Technologies and Device Training Outline Training Mode

Target Audience This training program is intended for t hose who are to take the HCNA certification exam and those who

HCNA-WCDMA Huawei Certified

hope to learn about basic WCDMA principles and

Network Associate-Huawei WCDMA

Huawei WCDMA equipment.

Technologies and Device Lecture, Hands-on


Prerequisites 9d




33






Complete installation design of site

Objectives



Complete hardware installation of site controller



Complete hardware installation of site (including feeder

After the completion of this program, participants will be able to: Describe the basic principle of WCDMA technology



Describe WCDMA system architecture and the wireless network interface Describe BSC6900 (WCDMA) system , hardware architecture and product specifications



Describe BTS3900/DBS3900 (WCDMA) hardware architecture and module functions



Outline typical configuration of BTS3900/DBS3900 (WCDMA)



Complete remote/local commissioning of the site







system, monitoring, and other peripherals)

Describe BTS3900/DBS3900 (MBTS) hardware



Complete site integration



Complete site service testing



Perform testing tool and testing indicators



Hardware installation check



Acceptance of a single-site (including service testing)



Hardware Replacement



Information collection



Deal with problems on site



On-site emergency recovery

Duration

architecture and module functions 

Outline typical configuration of BTS3900/DBS3900

9 working days

(MBTS) 

Complete engineering survey of site controller



Complete engineering survey of site



Complete installation design of site controller

13.2


Huawei Certified Network Professional-Huawei WCDMA


Prerequisites

HCNP-WCDMA Huawei Certified







Network Professional-Huawei WCDMA

Objectives

Technologies and Device Lecture, Hands-on


13 d

Target Audience This training program is intended for t hose who are to take the HCNP certification exam and those who hope to learn about basic WCDMA principles and


Describe WCDMA wireless network architecture



Describe the signaling process of the WCDMA system



Describe BTS3900/DBS3900 (MBTS) hardware



Describe BTS3900/DBS3900 (MBTS) architecture and module functions

Huawei WCDMA equipment. 

Outline typical configuration of BTS3900/DBS3900 (MBTS)


34



Outline CME configuration tool principles and platform



Describe the process of local upgrade of the site



Outline CME configuration tool operation



Complete remote upgrade of the site



Outline the M2000 system architecture and operation



Complete local upgrade of the site



Outline function of the M2000 system



Complete hardware replacement



Perform data configuration for site



Complete Information collection for controller



Perform data configuration for site controller



Deal with problems on site for controller



Complete the process of site data configuration



Complete On-site emergency recovery for controller



Complete the process of site controller data

Duration

configuration 

Perform software commissioning of the controller



Describe the process of software commissioning



Perform new site integration through M2000



Describe the process of new site integration



Describe the process of remote upgrade of the site

13 working days

Maximum Class Size 20 persons.

14 CDMA 14.1

Huawei Certified Network Associate-Huawei CDMA Technologies


channel Introduction) ; 

2.the technical characteristics and network architecture

Huawei CDMA Technologies and Device

of the the Trustar digital trunking communication

Training

system ; Lecture, Hands-on

Product knowledge (4 days)

7~7.5 d 

Target Audience

1.BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products(hardware components, the basic configuration rules and board function.);

This training program is intended for t hose who are to take the HCNA certification exam and those who



2,.the meaning of the BSC6680/BSC6600 /

hope to learn about basic CDMA principles and

RAC6610/MSE9830 controller and bts products, the

Huawei CDMA equipment.

meaning of it’s board indicator light; 

Prerequisites

3.BTS3900/BTS36xx series of CDMA base station antenna and feeder cable introduction ( basic knowledge




of radio waves, the ba sic principles of antenna radiation




of electromagnetic waves, introduced the concept of the

Objectives

antenna transmission cable, the base station ant enna and feeder cable systems) ;

Principles (1 day) 

1.cdma2000 1X & 1xEV-DO



basic technology (CDMA

environment of the project site, the power system ,

technology development road signpost、f cdma2000 1X/1xEV-DO technical characteristics and network structure, key technology of cdma2000 1X and UM

alarm boxes, etc.) ; 

5.the controller and bts products survey content and survey Note;

channel Introduction、EVDO new technologies and UM 


4.the introduction of complementary products (room

6.the bts hardware distribution, delivery rules, methods,

35

understanding Huawei BOQ and the meaning of t he



procedure of BSC6680/BSC6600/RAC6610/MSE9830

7.controller and base station hardware installation and

board、frame etc.



Data configuration and commissioning

Acceptance Test (1 day) 1.the BTS hardware installation quality inspection content and standards; 

1.Grasp the replacement method and operation

packing list;

the Power On Self Test;





2.Grasp the power meter, sitemaster ,test terminal use method;



2.Grasp the replacement method and operation procedure of BTS36xx/39xx serial bts board、BBU etc.

Duration 7～7.5 working days （no practice）


Chinese Edition adds the following: 

1.the BSC hardware installation quality inspection content and standards; Maintenance and Troubleshooting (1day)


36

14.2

Huawei Certified Network Professional-Huawei CDMA


Fundamentals) ; Product knowledge (4 days)

Huawei CDMA Technologies and Device



1.BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products(hardware components, the basic configuration rules and board function.);

Lecture, Hands-on 13.5~16 d 

Target Audience

2.the meaning of the BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products, the meaning of it’s board indicator light;

This training program is intended for t hose who are to take the HCNP certification exam and those who



3.BTS3900/BTS36xx series of CDMA base station

hope to learn about basic CDMA principles and

antenna and feeder cable introduction ( basic knowledge

Huawei CDMA equipment.

of radio waves, the ba sic principles of antenna radiation of electromagnetic waves, introduced the concept of the

Prerequisites

antenna transmission cable, the base station antenna 





and feeder cable systems) ; 

Objectives

environment of the project site, the power system , alarm boxes, etc.) ;

Principles (1.5 days +1 day) 

1.cdma2000 1X & 1xEV-DO

basic technology (CDMA



1X/1xEV-DO technical characteristics and network



packing list;

channel Introduction、EVDO new technologies and UM 

Data configuration and commissioning (2 days +1 day)

system ; 3.Grasp transmission fundamentals (TCPIP protocol and subnetting, Ethernet / VLAN / VRRP / Routing


7.controller and base station hardware installation and the Power On Self Test;

2.the technical characteristics and network architecture of the the Trustar digital trunking communication



6.the bts hardware distribution, delivery rules, methods, understanding Huawei BOQ and the meaning of t he

structure, key technology of cdma2000 1X and UM channel Introduction) ;

5.the controller and bts products survey content and survey Note;

technology development road signpost、f cdma2000



4.the introduction of complementary products (room



1.the BTS data and software loading process and methodology;

37



2.the BTS data configuration;



3.the BTS basic commissioning procedure;



4.the meaning of the BTS of the Engineering Indicators

Chinese Edition adds the following: (1 day+0.5

(VSWR, RSSI、output power) and test methods，Finish

days)

the BTS troubleshooting and quality inspection under



characteristics;



the guidance. ; 

5.the BTS environment alarm configuration, debugging;



6.IP RAN network form and IPRAN BTS data configuration;







content and standards; 3, the LMT maintenance method of signal tracing;

Chinese Edition adds the following (2 days + 2



4,Single BSC acceptance range and standard;

days)



5, the acceptance range and standard of BSC basic

1.BSC6680 controller internal signals (signaling, traffic)

characteristics;

processes procedure, the basic rules of the system

Maintenance and Troubleshooting (2 days + 0.5

configuration;

day)

2.Operation and maintenance system of BSC6680



3.BSC6680 data configuration (the basic configuration





36xx/39xx Series BTS and

CDMA BSC6680 hardware, clock, interface, cell, carrier,

RAC6610/BSC6600/BSC6680 ,basic information

and cdma2000 1X/1xEV-DO business data

collection methods, analysis and p rocess the common

configuration) ;

fault alarm base on online help;

4.BSC6680 signaling procedure(voice, data services,

5.the BSC data configuration under IP RAN network;



4.Grasp MSE9830 board replacement methods, procedure and information collection methods;



5.To understand the common fault scenarios of the 36xx/39xx Series bts, to grasp the emergency fault

1.the BTS hardware installation quality inspection

information collection and recovery measures, quickly

content and standards;

recovery according the guidance;

2.the BTS software installation quality inspection content and standards;



3.Familiar with the daily operation &maintenance of the

of BSC6680 system,, the file loading procedure, the

Acceptance Test (1 day+ 0.5 days)



2.Familiar with some of the commonly used test tools (sitemaster, power meter, test phone, etc.)

short message, handoff signaling process) ;



1.Grasp the replacement method of spare parts, clear procedure key points;

structure, the internal IP network, IP address planning) ;



2.the BSC software installation quality inspection



system networking, maintenance system software



1.the BSC hardware installation quality inspection content and standards;

(CDMA BSC6680 maintenance system agencies,



6.the acceptance range and standard of BTS basic



6.the use method of FMA tools

Duration

3.the LMT maintenance method of RSSI,VSWR, Transmit power tracing;



4.Single BTS acceptance range and standard;



5.Grasp the power meter, sitemaster ,test terminal use

13.5~16 working days （no practice）

Maximum Class Size 20 persons.

method;


38

15 Wimax 15.1

Huawei Certified Network Professional-Huawei Wimax


Huawei Certified Network Professional-Huawei Wimax Technologies and Device Lecture, Hands-on

8d




Outline DBS3900 WiMAX functions



Outline each board function of DBS3900 WiMAX



Complete the inside connection of DBS3900



State the typical networking configuration



Describe WiMAX Network Structure



Master the local operation and remote operation



Complete daily maintenance tasks



Complet the concept related to configuration Management

to take the Wimax certification exam and th ose who hope to l earn about basic Wimax principles and Huawei Wimax equipment.

Prerequisites 






Describe OFDM/OFDMA Basics



Describe WiMAX Features



Describe WiMAX Applications



Describe WiMAX system networking



Outline each board function of DBS3900 WiMAX



Complete the inside connection of DBS3900



State the typical networking configuration



Describe WiMAX system networking




Complet how to perform configuration Management



Finish basic data configuration for WiMAX DBS3900



Describe the two types of commissioning



Perform local commissioning



Perform remote commissioning



Describe How to install DBS3900 in site



Describe how to install Antena system



Finish bacis function Acceptance.



Can be done



Complete daily maintenance tasks 

Deriver test

Can be change board basicly

Duration 8 workdays


39

16 GSM RNP&RNO 16.1

Huawei Certified Network Associate- Huawei GSM RNP&RNO

Technology Training Outline Training Mode

Planning knowledges 

Familiar with radio transmission theoretics and the usual transmission model.

Huawei Certified Network

Optimization knowledges

Associate-Huawei GSM RNP&RNO Technologies Training



Capable of independently writing the analysis of electromagnetic interference, and providing preliminary

Lecture,Hands-on

7d

Target Audience

resolutions for the target area accordingly. 

Capable of independently finishing site survey and report upon request.



This training program is intended for those who are to



take the HCNA GSM RNP&RNO certification exam.

Prerequisites 

Skilled in windows operating system.



Capable of describing the basic functions of computer

radio parameters and quality of a ntenna. 

Skilled in using business softwares like office and

problems of DT/CQT by Genex Assistant and deliver resolutions accordingly. 

Capable of describing the basic functions of mobile communication.

Objectives Principle 

Understandable of the GSM basic theories /wireless transmission /telecomunicatios as well as at tenna and

Capable of dealing with common customer’s complaint by DT/CQT.

outlook. 

Capable of independently accomplishing DT/CQT test (single site verification) by Genex Porbe, analyzing the

network. 

Capable of independently using related tools to survey



Familiar with the meaning and adjusting regulations of commonly used Network Design parameters.

Duration 7 workdays


associated parameters.


40

16.2

Huawei Certified Network Professional - Huawei GSM RNP&RNO

Technology Training Outline Training Mode



Master the GSM coverage planning, capacity planning, neighbor/frequency design, location area design, parameters design and GPRS planning.

Huawei Certified Network Professional-Huawei 

GSM RNP&RNO Technologies Training

Lecture,Hands-on

of Network Design.

8d 


Master the way of CW testing and related data processing.



Master the corrective procedure of transmission model. Optimization knowledges

to take the HCNP GSM RNP&RNO certification exam.

Master the related parameters and adjusting regulations



Master the RF optimazition & procedure, methods and tools, capable of processing GSM radio network RF

Prerequisites

optimazition. 




Skilled in using business softwares like office and outlook .







Master the definition of traffic statistics and counter point in the wireless side of G SM Network.



Master GSM common KPI analysis and network

Capable of describing the basic functions of mobile

problem solution, such as drop call, handover, voice

communication.

quality and data traffic.

Have qualifications for HCNA-Huawei GSM RNP&RNO



Capable of independently completing network

Technologies.

optimazition reports and generating problem analysis

Objectives

reports.

Principle 

Familiar with GSM communication theory.



Master wireless network planning and optimazition

Duration 8workdays

Maximum Class Size

process. Planning knowledges


16 persons

41

17 WCDMA RNP&RNO 17.1

Huawei Certified Network Associate-WCDMA RNP&RNO Training

Outline Training Mode



Familiar with the theory of radio propagation and common propagation models. Optimization knowledges

Huawei Certified Network Associate-WCDMA RNP&RNO Training Lecture,Hands-on



analysis, and existence of the interference region is

7d

Target Audience This training program is intended for t hose who are to take the Huawei Certified Network

given a preliminary settlement proposals. 

Be able to independently asked to complete the site investigation and reporting.



Be able to use the tools to verify the wireless working parameters and the quality of the antenna and cable

Associate-WCDMA RNP&RNO certification exam.

Prerequisites

Independent output electromagnetic interference

correction. 

Be able to independently use the Genex Probe,




completion of DT / CQT testing (including single-station




verification), Genex Assistant analysis of the problem in

outlook.

the DT / CQT, the output of the corresponding solutions.






Deal with general customer complaints by DT / CQT.



Grasp the road test KPI the meaning and the testing method, independent production test program and

Objectives

complete. Principle 



Master the cell parameters to verify the method, familiar

Understandable of the WCDMA basic theories, wireless

with the meaning of the parameters and adjust the basis

transmission, telecomunicatios, attenna and associated

of the common network rules.

parameters.

Duration


Master antenna selection.



Initial grasp of network planning and optimization process, familiar with the site survey, RF Tuning

7 workdays


process.

17.2

Huawei Certified Network Professional-WCDMA RNP&RNO

Training Outline


42

Training Mode

and neighbor / frequency planning, LAC planning, scrambling code planning.

Huawei Certified Network Professional-WCDMA



RNP&RNO Training

Lecture,Hands-on

and adjustment of principles.

11 d

Target Audience





Optimization knowledges 

exam.

Prerequisites 







Master the definition of traffic statistics and counter point in the wireless side of G SM Network.



To master the problems of the common words of WCDMA system KPI analysis and network processing, familiar, then the system KPIs (Access, retention and


mobility)optimization method. 

Have qualifications for HCNA-Huawei WCDMA RNP&RNO Technologies.


Familiar with the WCDMA communication theory.



Master the wireless network planning and optimization process. Planning knowledges



Master the RF optimization of processes, methods, tools, with network RF optimization capabilities.

outlook.



Master the propagation model calibration processes, methods.

to take the Huawei Certified Network Professional-WCDMA RNP&RNO certification

Grasp the CW test method, the CW test data processing.




Grasp the relevant parameters of the network planning

Familiar with Huawei UMTS RNC maintenance operations.



Able to independently finish the network optimization reporting and problem analysis report writing.

Duration 11workdays


Master the UMTS coverage planning, capacity planning,

18 CDMA RNP&RNO 18.1

Huawei Certified Network Associate-Huawei CDMA RNP&RNO

Technologies Training Outline


43

Training Mode



Familiar with radio transmission theoretics and the usual transmission model.

Optimization knowledges

Huawei Certified Network Associate-Huawei CDMA RNP&RNO



Capable of independently writing the analysis of electromagnetic interference, a nd providing preliminary

TechnologiesTraining

resolutions for the target area accordingly. Lecture,Hands-on

8d



report upon request.

Target Audience 

This training program is intended for t hose who are to take the HCNA CDMA RNP&RNO certification






problems of DT/CQT by Navigator and deliver resolutions accordingly 



Understandable of the CDMA basic theories /wireless transmission /telecomunicatios as well as attenna and

Capable of dealing with common customer’s complaint by DT/CQT.

outlook. 

Capable of independently accomplishing DT/CQT test(single site verification) by Pioneer, analyzing the

Prerequisites Skilled in windows operating system.

Capable of independently using related tools to survey radio parameters and quality of a ntenna.

exam.



Capable of independently finishing site survey and



Familiar with the meaning and adjusting regulations of commonly used Network Design parameters.

Duration 8 workdays


associated parameters. Planning knowledges

18.2

Huawei Certified Network Professional-Huawei CDMA RNP&RNO

Technologies Training Outline


44

Training Mode



Master the Network structure of multi-trxs , familiar with the theories of PN, LAC and Neighbour design.

Huawei Certified Network Professional-Huawei



CDMA RNP&RNO Technologies Training

Lecture,Hands-on

processing.

8d

Target Audience



Master the corrective procedure of transmission model.



Master the related parameters and adjusting regulations of Network Design. Optimization knowledges

This training program is intended for t hose who are to take the HCNP CDMA RNP&RNO certification



exam.

optimazition. 









quality and data traffic . 

Have qualifications for HCNA-Huawei CDMA RNP&RNO Technologies.


Familiar with CDMA communication theory.



Master wireless network planning and optimazition process.

Master CDMA common KPI analysis and network problem solution, such as drop call, h andover, voice


Master the definition of traffic statistics and counter point in the wireless side of CDMA Network.

outlook . 

Master the RF optimazition & procedure, methods and tools, capable of processing GSM radio network RF

Prerequisites 

Master the way of CW testing and related data

Familiar with operating on HUA WEI CDMA BSC’s flatform;



Capable of independently completing network optimazition reports and generating problem analysis reports.

Duration 8 workdays

Maximum Class Size


Master the elements which impact on coverage and

16 persons

capacity. Familiar with the basic principle of power configuration.


45

19 Microwave RNP 19.1

Huawei Certified Network Associate-Huawei Microwave RNP

Technologies Training Outline Training Mode

will be able to：

Huawei Certified Network Associate-Huawei



Lecture,Hands-on excercise

theory and

understand electromagnetic wave propagate model i n

Microwave RNP Technologies Training TA08

Describe the wireless radio-technology free space.

3d

Target Audience



Complete site LOS survey report independent.



Complete performance calculation for microwave links independent.




to take the Microwave planning certification exam and those who hope to learn basic microwave transmission principles and LOS survey process， and basic TCP/IP knowledge.

Be familiar with popular parameters on microwave planning, and performance adjustment methods



Be familiar with basic TCP/IP knowledge and Ethernet principle.

Duration

Prerequisites 3 Working days 





Objectives




46

19.2

Huawei Certified Network Professional-Huawei Microwave RNP

Technologies Training Outline Training Mode

will be able to：

Huawei Certified Network Professional-Huawei



With primary engineer requirements.



Be familiar with microwave telecom principle and TDM , Hybrid and IP radio working principle.

Microwave RNP Technologies Training TA08

Lecture,Hands-on excercise

3d

Target Audience



Complete primary planning for network topology and capacity.



Be familiar with common frequency band and air channel allocation regulation, could complete frequency


design and interference analysis for middle scale

to take the Microwave planning advanced

network

certification exam，and those who hope to learn



about frequency planning, interference analysis and Ethernet traffic design.

optimize method. 

Prerequisites 







With hardware installation and commissioning experience of Microwave or optical



Knowledge about Microwave telecom common principle.

Be familiar with microwave link design process and

Understand deeply common KPI of microwave design and parameters selection regulations.



Complete general evaluation for microwave network and afford related design suggestions.



Manage the microwave planning team.

Duration 3 Working days

Maximum Class Size

Objectives 16 persons After the completion of this program, participants


47

20 Site and Power System 20.1

Huawei Certified Network Associate- -Huawei Site and Power

System Technology and Device Training Outline Training Mode



Describe the structure, functions and features of ITS1000M and Power3000 Solution.

Huawei Certified Network Associate- -Huawei Site and Power System Technology and Device Training ODC01

Lecture, Hands-on

9d

Target Audience



parts. 





Perform ITS1000M and Power3000 Solution operation and maintenance, etc.



Locate and eliminate faults, get experience from troubleshooting practice.

ITS1000M and Power3000 equipment.

Prerequisites

Execute the Field operation, such as Battery replacement.

exam and those who hope to learn about basic ITS1000M and Power3000 principles and Huawei

Outline the load capacity and ability of ITS1000M and Power3000 Solution.

This training program is intended for t hose who are to take the Site and Power System certification

Explain the functions and specifications of different



Remote update software

Duration 

Having working experience in the operation and maintenance of Power3000.



Be familiar with Battery group.

Objectives

9 workdays


After the completion of this program, participants will be able to:


48

21 Hybrid Power Supply 21.1

Huawei Certified Network Associate- Huawei Hybrid Power Supply

Technology and Device Training Outline Training Mode



Describe the structure, functions and features of Power1000 and Power2000 Solution.

Huawei Certified Hybrid Power Supply — Huawei



Hybrid Power Supply Technology and Device ODC00

parts.

9d

Lecture, Hands-on



Target Audience

Outline the load capacity and ability of Power1000 and Power2000 Solution.




and those who hope to learn about basic



Perform Power1000 and Power2000 Solution operation and maintenance, etc.

Power1000 and Power2000 principles and Huawei Power1000 and Power2000 equipment.

Execute the Field operation, such as Battery replacement.

to take the Hybrid Power Supply certification exam



Locate and eliminate faults, get experience from troubleshooting practice.

Prerequisites  

Explain the functions and specifications of different

Having working experience in the operation and

Remote update software

Duration

maintenance of D.G. 

9 workdays

Be familiar with Battery group.

Maximum Class Size

Objectives

12 persons

After the completion of this program, participants will be able to:

22 Hardware Installation Supervision (excluding RF products) 22.1

Huawei Certified Network Associate-Hardware Installation

Supervision (excluding RF products) Training Outline Training Arrangement

Entrance Requirements

Huawei certification of telecommunications



equipment hard mounted Coaching Lectures,

Huawei hardware installation personnel and Huawei hardware installation sub-contractors

5 days



Dedicated personnel with basic electronic knowledge and electrician skills

Trainees

Objectives

Personnel who attend the certification test of hardware installation for Huawei telecom

Upon completion of this training pr ogram, the

equipment

trainees will understand the follo wing subjects:

Personnel who hope to know more about



hardware maintenance and troubleshooting of Huawei equipment


Introduction to EHS management during engineering delivery



Telecom installation specifications

49



Specifications on common tools and wireless products



Specifications on installing and laying out cables

installation



Cable connector production



Required knowledge about installability



User guide for common tools of communication project



MA5600 hardware installation guide



SOP of OptiX OSN 3500



Guide to core network UMG8900 cabinet cascaded

Duration Five routine working days

Maximum number of trainees 20

optical fiber installation (2008.05.20) 

Core network hardware installation training material

23 Hardware Installation Supervision (including RF products) 23.1

Huawei Certified Network Associate-Hardware Installation

Supervision (including RF products) Training Outline Huawei equipment

Training Arrangement

Entrance Requirements Huawei certification of telecommunications equipment hard mounted Coaching Lectures,



Huawei hardware installation personnel and Huawei hardware installation sub-contractors

6 days 

Dedicated personnel with basic electronic knowledge and electrician skills

Trainees

Contents Personnel who attend the certification test of hardware installation for Huawei telecom

Upon completion of this training pr ogram, the

equipment

trainees will understand the follo wing subjects:

Personnel who hope to know more about hardware maintenance and troubleshooting of




Introduction to EHS management during engineering delivery

50

Huawei Certification Training Catalog (Subcontractors) V1.2

Recommend Documents