Dialux Evo Tutorials 01

DIALux evo Tutorial 01

Ezzat Baroudi

DIALux evo Tutorials Tutorial 1 How to create a cornice In this tutorial you will learn the following f ollowing commands. 1- Importing and managing a cad file. 2- Using extrusion volume. 3- Scaling an object. 4- Using copy and arrange tool. 5- Using subtract command. This tutorial gives some tips on how you can create a cornice in DIALux; the cornice could be normal like the one on the lift photo below or a cornice for cove light like the one in the right photo below.

Standard cornice

Cornice for cove light

First let’s get the cad drawing which have the section of the cornice and import it to DIALux evo

1


Ezzat Baroudi

Cad section for a cornice

Follow the step below to import the cad drawing

2


Ezzat Baroudi

1-

Make sure you are on the construction mode

2-

Go to cad import

3-

Click on import DWG

4-

Adjust the unit to match the cad system

5-

Move the cad to a convent location inside your space.

You can also check other properties like changing the color of the layer or embeding the file in the project. When you select the embed the file you are actually saving the cad inside your project so you don’t need the external cad reference any more

3


Ezzat Baroudi

Form display options make sure that DWG display is activated

Now the second step is to create a the object of the cornice Go to furniture and select Extrusion volume

4


Ezzat Baroudi

After that click on draw extrusion volume

Follow the cad lines, when you finish all the points right click and select close polygon.

5


Ezzat Baroudi

Now you have created the section of the cornice in the plan view of DIALux, so the next step to rotate the object to be in the right position. Select the object and go to the position and rotate 90 in x axis

Now you can see the object

6


Ezzat Baroudi

you can move the object to right location, let’s say for this example it is the ceiling of a room. You can move it easily in the side or front view

You can scale the object in the plan view to cover the required space 7


Ezzat Baroudi

Now you can copy and paste the object multiple times to cover all the boundary of the room, then move rotate and scale according to the required length, you can see form the plan view below

8


Ezzat Baroudi

While moving or rotating, if the any of objects moves in the z axis, you can easily adjust that by the awesome align tool Go to copy and arrange tool then select all the objects of cornice and click on light align top z then all objects will follow the most top object.

9


Ezzat Baroudi

There is now one step left to refine the shape of all corners There are two types of corners, inside and outside as you can see form below photo

You don’t need to do anything about the inside corner, but the outside corner will look weird as you can see below

Now let’s refine it and cut the extra shape.

10


Ezzat Baroudi

The hatched in red area has to be removed by subtraction

The object after subtraction

To cut the extra shape, follow the steps below I.

II.

Zoom to the outside corner

Draw an extrusion volume covering the extra triangle area of one object

11


III.

Ezzat Baroudi

Make sure the corner triangle covering the cornice, if not use copy and arrange tool to align it to the top of the cornice

12


IV.

Ezzat Baroudi

Select both object and go to copy and arrange tool, then select subtract tab as could be seen form below. From copy and arrange tool in the construction mode. 1) Select subtract tab 2) Select the object to remain 3) Make sure the object to remain in red color in 3d view 4) Click on subtract button

V.

Repeat the same steps for the other object

13


Ezzat Baroudi

Now you should be having a perfect outside corner cornice

Before refining the outside

After refining the outside corner!

corner

14

Dialux Evo Tutorials 01

Recommend Documents