114

#114 MOLY NATURAL GAS ENGINE OIL SAE 10, 30 & 40 Moly Natural Gas Engine Oil is a superior low ash natural gas engine oil that is specially formulated for use in stationary 2-cycle and 4-cylcle natural gas engines. Moly Natural Gas Engine Oil is blended from the finest high viscosity index solvent refined severely hydro-finished 100% pure paraffin base stocks available. These 100% pure paraffin base stocks provide the Moly Natural Gas Engine Oil with: 1. 2. 3. 4. 5.

Excellent Thermal Stability High Lubricity Excellent Resistance to Oxidation & Thermal Degradation A naturally High Viscosity Index Excellent Film Strength

Blended into the 100% pure paraffin base stocks is a highly specialized additive package. This highly specialized additive package contains the proper balance of detergent, dispersant, rust and oxidation inhibitors and anti-wear additives that allows the Moly Natural Gas Engine Oil to provide the following performance advantages: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.

Excellent piston groove, land and skirt cleanliness. Elimination of piston skirt varnish. Improved oxidation and nitration stability. A vast reduction in piston ring sticking. A reduction and modification of carbon deposits on piston crowns, combustion chamber walls, spark plugs, cylinder wall, etc. Reduced piston, ring, cylinder walls and bearing wear. Reduced port deposits and port plugging. Reduced bearing corrosion. Extended oil filter life. Longer spark plug life. Minimized combustion chamber ash accumulation and plug fouling. Catalytic converter compatibility. Increased engine durability and reliability. Longer oil drain compatibility. Reduced downtime and maintenance.

Further blended into the 100% paraffin base oils, the performance additive package and the viscosity index improver is a proven frictional modifier, Micron Moly®. Micron Moly® is a liquid soluble type of moly that plates to the metal surfaces of the engine. Once plated the moly forms a long lasting lubricant film which prevents the metal surfaces from coming into contact with each other. By preventing metal to metal contact, damaging frictional wear is eliminated, which leads to less downtime and longer equipment life.

Continued on Next Page TD-114 (Rev. 10/00)

TD-114 Page 2 TYPICAL PROPERTIES SAE Grade ISO Grade API Gravity 60°F/15°C Specific Gravity 60°F/15°C Viscosity 40°C Cst (ASTM D-445) Viscosity 100°C Cst (ASTM D-445) Viscosity Index (ASTM D-2270) Flash Point °F/°C (ASTM D-92) Fire Point °F/°C (ASTM D-92) Pour Point °F/°C (ASTM D-97) Sulfated Ash Content % wt (ASTM D-874) Total Base Number (ASTM D-2896) Total Acid Number (ASTM D-664) Calcium % wt Phosphorous % wt Zinc % wt Nitrogen % wt

Packaging:

10 32 30.5 .8735 34.00-39 6.9 110 420°/210° 455°/235° -10°/-23.3° 0.4 5.1 2-3 .104-.118 .024-.031 .028-.04 .081-.98

30 100 28 .8871 87.5-94.5 10.5-12 102 465°/240.56° 525°/273.8° 0°/-18° 0.4 5.1 2-3 .104-.118 .024-.031 .028-.04 .81-.098

40 150 27 .8927 170-180 13.50-15.5 100 480°/248.89° 540°/282.22° 5°/-15° 0.4 5.1 2-3 .104-.118 .024-.031 .028-.04 .81-.098

#114 Moly Natural Gas Engine Oil is available in (net weights) 55 gallon drums and 30 gallon drums.