TECHNICAL PROPOSAL
Sondex A/S PHE - Desi n & Datalist __________________________________________________________________ CETCO E-S24002A/B 14/9/2017 001 PW Cooler Item: 1 ____________________________________________________________________________ PHE-Type S86-IS16-271-TMTL16-LIQUID Hot side Cold side Flowrate (Note 1) (kg/h) 317468.00 271816.00 Inlet temperature (°C) 63.10 32.00 Outlet temperature (°C) 40.00 60.00 Pressure drop (bar) 1.01 0.74 Heat exchanged (kW) 8832 Thermodynamic properties: Density Specific heat Thermal conductivity ean viscosity all viscosity
(kg/m³) (kJ/kg*K) (W/m*K) (mPa*s) (mPa*s)
Produced Water Cooling Water 989.00 996.00 4.34 4.18 0.66 0.64 0.53 0.59 0.53 0.59
Inlet branch F1 F3 Outlet branch F4 F2 ____________________________________________________________________________ Design of Frame / Plates: Plate arrangement (passes*channel) 1 x 135 + 0 x 0 Plate arrangement (passes*channel) 1 x 135 + 0 x 0 Number of plates 271 Effective heat surface (m²) 242.10 Plate material 0.6 mm TITAN Gasket material / Max. temp. NITRIL HT SONDER LOCK (S) / 140 ax. design temperature (°C) 120.00 ax. Working/test pressure (bar) 12.00 15.60 ax. Differential pressure (bar) 12.00 Approval None Liquid volume (liter) 729 Frame length (mm) 2095 Max. No. of Plates 289 Net weight (kg) 2167 Frame type IS Connections HOT side : 6 INCH Fl. cl. with Titan ANSI B16.5 #150 Connections COLD side: 6 INCH Fl. cl. with Titan ANSI B16.5 #150 ____________________________________________________________________________ Category C2L BLUE RAL 5010 Note: 1) The flowrate for cooling water (cold side) will be 271,816 kg/h in order to meet the required temperature. 2) Connection at both hot side and cold side shall be 6” cladded with titanium liner.
Sondex A/S Tel: +45 76306100
Marsvej 5 Fax:
DK-6000 Kolding +45 75538968/75505019
100
L1
5 8 2
F1 F1-F4 OR B1-B4 DN150 DIN2633 6" CLASS 150 CLADDED OR RUBBERLINED
B2
F2
B1
296
0 5 3 2
4 9 6 1
F1-F4 DN150 DIN2633 6" CLASS 150 UNCLADDED
F4
4 5 2 2
0 5 3 2
4 9 6 1
F3
B3
5 7 2
5
50
5 7 2
7
45 45 2095
296
50
608
B4
608 2045
80
20
18
18 0 0 1
8 0 5
8 0 6
50
Designed by Dimensions without tolerance:
Date Approved by
Date Rev. no.
LGK 26-01-2011 FLEB 12-09-2016
ISO 2768-m ISO projektion
SONDEX Jernet 9 DK-6000 Kolding
S41/42 - S62 - S79- S86 - S110 Plate Heat Exchangers
Recommended Applications: The S41/42, S62, S79, S86 and S110 range of Sondex plate heat exchangers is specially designed for the HVAC area, the geothermal-, marine-, and heat recovery area as well as the food, industrial and chemical market.
Design Principle: The S41/42, S62, S79, S86 and S110 plate range with lengths up to 2,3 m (7,5 ft) and a “long” thermal pattern will cover many duties up to 350 m 3 /h (1.541 gpm) in a single pass solution, meaning that all the connections are on the head side. This will ensure easy pipe- and service work, and by dismantling the exchanger for service, no pipes need to be removed. The heat transfer is obtained, when the warm medium transfers energy through the thin, strong flow plates between t he channels and delivers it to the cold opposing medium without mixing t he two media. Counter-current flow creates the optimal efficiency. The plate- and inlet design allows effective, easy CIP (Cleaning in Place) of all “flow” surfaces.
Flow plates: The corrugated “herringbone” pattern ensures turbulent flow in the whole effective area. Furthermore, this pattern brings “metallic” contact
02
Revision Text
Changed to EN13445 and thickness of covers changed from 60mm to 45mm
Description:
S86 S87 IS PN16 DN150 DIM DRAWING FEA (S.L) LENGTH 600 - 3000 MM Rev. date
Rev. by
Drawing no.
07-09-2016 FLEB S86-S87ISPN16DN150L600-3000-FEA
Sheet
1 /1
S41/42 - S62 - S79- S86 - S110 Plate Heat Exchangers
Recommended Applications: The S41/42, S62, S79, S86 and S110 range of Sondex plate heat exchangers is specially designed for the HVAC area, the geothermal-, marine-, and heat recovery area as well as the food, industrial and chemical market.
Design Principle: The S41/42, S62, S79, S86 and S110 plate range with lengths up to 2,3 m (7,5 ft) and a “long” thermal pattern will cover many duties up to 350 m 3 /h (1.541 gpm) in a single pass solution, meaning that all the connections are on the head side. This will ensure easy pipe- and service work, and by dismantling the exchanger for service, no pipes need to be removed. The heat transfer is obtained, when the warm medium transfers energy through the thin, strong flow plates between t he channels and delivers it to the cold opposing medium without mixing t he two media. Counter-current flow creates the optimal efficiency. The plate- and inlet design allows effective, easy CIP (Cleaning in Place) of all “flow” surfaces.
Flow plates: The corrugated “herringbone” pattern ensures turbulent flow in the whole effective area. Furthermore, this pattern brings “metallic” contact between the plates, and together with “Sonder Lock” lock devices on the gaskets, the plate pack is easily assembled. The plate pack is held firm and safely between the fixed head and movable follower of the frames.
Data Required for Correct Quotation: • Duty • Type of media • Pressure loss
• Flow rate • Temperature • Working pressure • Working Temperature • Thermodynamic properties
Above data determines the choice of heat exchanger.
S110
Technical Information
S110 S86 S79
S62
S41/42 296 mm (11,6”)
) ” 9 , 0 5 ) ” m 2 , m 4 2 3 9 ( 2 m 1
) ” 7 , ) 6 ” 6 8 , ( 1 m 6 m m 4 m 9 0 6 7 1 5 1
) ” 4 , 2 8 ( m m 4 9 0 2
m 0 9 8
Frame:
Construction Standard:
• Painted frame, colour RAL 5010 (available in other colours) • Stainless steel frame, designed for the food and dairy industry. Both frames comes with clamping bolts placed around the frame edge.
• EN13445 (PED 2014/68/EU) • ASME sec VIII, Div. 1
Design Pressure:
• Painted frames: 1.0/1.5/2.5 MPa. (145/217/362 PSI) • Stainless steel frame: 1.0/1.6 MPa. (145/232 PSI) Intermediate Frames:
Intermediate frames and corner blocks for IS and FS frames in stainless steel.
Connections: • DN150/6” flange in carbon steel,
rubberlined or cladded with AISI 316 or titanium • DN100/4”, DN125/5” and DN150/6” dairy unions According to all known standards.
Gaskets: The gasket is placed in the closed gasket groove, that is formed by the plates. This design makes the plate suitable for high working pressures. The plates are strongly guided during the assembly of the plate heat exchanger. Materials: NBR, EPDM and Viton. Other materials available on request. Extra Equipment:
Plate Material:
AISI 304/316, 254 SMO and titanium. Also 2 x 0.4 mm “Sonder Safe” plates, for food and industry. Other materials available on request.
• Safety cover in stainless steel • Insulating jacket • Assembling spanner • Foundation feet for IS frame • Instrument flange • Thermometer and manometer
For exact dimensions of the PHE please refer to the dimension drawing Sondex A/S
• Marsvej 5 • DK-6000 Kolding • Denmark • Tel. +45 76 306 100 • Fax +45 75 538 968 / Fax +45 75 505 019 •
[email protected] • www.sondex.net
. e c i t o n t u o h t i w a t a d y n a e g n a h c o t t h g i r e h t s e v r e s e r x e d n o S . s l a i r e t a m d e t n i r p y n a n i s r o r r e e l b i s s o p r o f e l b a i l d l e h e b t o n n a c x e d n o S • S / A x e d n o S © t h g i r y p o C
