Skills Mod 2 Final

Student Name:_Sgt Cameron_

Class: 33-09__

Grade:___________________ 

Exploration Routing: EIGRP Skills Based Assessment

EIGRP 100

CCNA MODULE 2 SKILLS EXAM – EIGRP Use the 192.168.156.0/22 address to create an addressing scheme to accommodate accommodate all hosts on the network. Begin the address assignments with the 192.168.157.0 a ddress.

TABLE 1 Device

HQ

Remote1 Remote2

Interface Fa0/0 Fa0/1 S0/0/1 S0/0/0 Fa0/0 Fa0/1 S0/0/1 Fa0/0 Fa0/1 S0/0/0

Number of   Hosts 90 60 2 2 30 60 2 128 60 2

Subnet

Subnet Mask

192.168 68..158 58..0 192. 19 2.16 168. 8.15 158. 8.12 128 8 192. 19 2.16 168. 8.15 159. 9.10 100 0 192. 19 2.16 168. 8.15 159 9.9 .96 6 192. 19 2.16 168. 8.15 159 9.6 .64 4 192.168 68..159 59..0 192. 19 2.16 168. 8.15 159. 9.10 100 0 192.168.157.0 192. 19 2.16 168. 8.15 158. 8.19 192 2 192.168.159.96

255. 5.2 255.255.128 255. 25 5.25 255. 5.25 255. 5.19 192 2 255. 25 5.25 255. 5.25 255. 5.25 252 2 255. 25 5.25 255. 5.25 255. 5.25 252 2 255. 25 5.25 255. 5.25 255. 5.22 224 4 255. 5.2 255.255.192 255. 25 5.25 255. 5.25 255. 5.25 252 2 255.255.255.0 255. 25 5.25 255. 5.25 255. 5.19 192 2 255.255.252

Table 2 Device

HQ

Remote1

Remote2 PC1 PC2 PC3 PC4 PC5 PC6

Interface Fa0/0 Fa0/1 S0/0/1 DCE S0/0/0 DCE Lo0 Fa0/0 Fa0/1 S0/0/1 Fa0/0 Fa0/1 S0/0/0 Ethernet Ethernet Ethernet Ethernet Ethernet Ethernet

IP Address 192.168.158.1 192.168.158.129 192.168.159.101 192.168.159.97 189.54.69.254 192.168.159.65 192.168.159.1 192.168.159.102 192.168.157.1 192.168.158.193 192.168.159.98 192.168.158.126 192.168.158.190 192.168.159.94 192.168.159.62 192.168.158.254 192.168.157.254

Subnet Mask 255.255.255.128 255.255.255.192 255.255.255.252 255.255.255.252 255.255.255.252 255.255.255.224 255.255.255.192 255.255.255.252 255.255.255.0 255.255.255.192 255.255.255.252 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.192 255.255.255.192 255.255.255.0

Default Gateway N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 192.168.158.1 192.168.158.129 192.168.159.65 192.168.159.1 192.168.158.193 192.168.157.1

Step 2: Cable and configure the network based on the diagram and the addressing scheme you created in the previous step. Task 3: Configure EIGRP with Process ID 100 using Wildcard Masks. Step 1: Configure EIGRP on the HQ router and advertise all directly connected networks except the loopback interface. Advertise the network along with a wildcard mask for the appropriate subnet. Step 2: Configure EIGRP on the Remote1 router and advertise all directly connected networks. Advertise the network along with a wildcard mask for the appropriate subnet. Step 3: Configure EIGRP on the Remote2 route and advertise all directly connected networks.

Advertise the network along with a wildcard mask for the appropriate subnet.

Task 4: Discontiguous Networks . Step 1: Configure each router so that subnet mask information about each network is propagated within the EIGRP updates. Step 2: Verify that each router has a path to each network in the autonomous system.

Task 5: Static Default Route Step 1: Configure a static default route on the HQ router to the loopback interface. Step 2: Propagate the static default route in the HQ routing update. Step 3: Verify that the static default route is received by the Remote1 and Remote2 routers. Step 4: Ping the loop back interface on the ISP router from each host. Was PC1 successful? _yes_  Was PC2 successful? _yes_  Was PC3 successful? _yes_  Was PC4 successful? _yes_  Was PC5 successful? _yes_  Was PC6 successful? _yes_ 

If you are not successful, troubleshoot configurations using the appropriate show  and debug commands.