LCT Installation Manual

Local Craft Terminal Installation




Contents 1

Software Installation

FT4282EN02GLA00 © 2010 Nokia Siemens Networks

3

1


2



1



Software Installation


3


1.1

System Requirements

Minimum hardware requirements: 

CPU 1,6 GHz



512 Mbyte RAM (1 GB suggested) for Microsoft Windows XP, 1 GB RAM for Microsoft Windows Vista



Minimum Video Resolution: 1024x768



CD-ROM drive



Ethernet network card

Software requirements: 

Microsoft Windows Vista Business Edition (or higher) or Microsoft Windows XP Professional (Service Pack 2 or higher)



TCP/IP communication protocol installed

WARNING LCT must not be installed on the same PC where NetViewer system is already installed (NetViewer implements also the LCT function).

WARNING If a previous version of LCT is already installed, it is necessary to uninstall the already installed version before executing the installation of the new version.

1.2

Installation of Java Runtime Environment

In the applications that require the presence of Java Runtime Environment (LCT plug-in, ...), the installation of the required environment version is embedded in the installation of the applications themselves. In fact, the setup program of an application check for the presence of the required version of the Java runtime environment; if the result of the check is negative, the installation of the Java runtime environment automatically starts. If, at the end of the installation of Java runtime environment, the restart of the PC is required, answer no; execute the restart, if required, only at the end of the installation of the application. WARNING After the installation of Java Runtime Environment, do not uninstall possible other versions of Java Runtime Environment, previoulsy installed on PC.

4



1.3



Installation of LCT

The installation of the LCT installs, on the PC, the following applications: 

GUI of LCT



LCTStart



NetBuilder



FlexiPacketRadio plugin



FlexiPacketHub plugin



Online help.



A-1200 First-Time Installer



A-2200 First-Time Installer



FlexiPacket First Commissioning Tool

If a previous version of LCT is already installed, it is necessary to uninstall the already installed version before executing the installation of the new version. Before uninstalling a previous version of LCT, it is suggested to make a copy of the configuration file (map file) and of the data files (log files, report files, ...) created by the users by means of LCT. Starting from this version of LCT, the default folders where the user data and the user settings are saved (par. 6.8) have been changed: – the user data are saved in the “LCT” folder relevant to the system use profile of the user himself: 

“C:\Documents and Settings\\Application Data\LCT” in Microsoft Windows XP



“C:\Users\\AppData\Roaming\LCT” in Microsoft Windows Vista

– the user settings are saved in the “LCT” folder relevant to the system All Users profile, in such a way to be reachable and accessible to all users: 

“C:\Documents and Settings\All Users\Application Data\LCT” in Microsoft Windows XP



“C:\ProgramData\LCT” in Microsoft Windows Vista.


5


1.3.1

Setup procedure of LCT

The setup procedure of LCT is the following one: 

Run the guide of the CD-ROM of LCT (file: “:\Launch.exe”).



The main menu of the guide of the CD-ROM opens (Fig. 1). Click on Install LCT FP MW 3.2.



If the previous version of LCT is installed, the system displays the Welcome window of the setup maintenance program (Fig. 2). In this case, it is necessary to remove the previous version of LCT before installing LCT (par. 3.4.2).



If the previous version of LCT is not installed, the system displays the Welcome window (Fig. 3) of the setup program. Click on Next to continue the setup procedure.



The system displays the License Agreement window. Accept the license conditions for the use of the software. The system activates the Next push-button. Click on Next to continue the installation procedure.



The system displays the Choose Destination Location window (Fig. 4) for the selection of the destination folder relevant of LCT; by default, the folder: C:\Program Files\Nokia Siemens Networks is selected. Click on Next to confirm the selection and to continue the setup procedure.



At this point, the setup checks if the required version of the Java runtime environment is installed on the PC. If the check is not successful, it is necessary to install the Java runtime environment. The system displays the JRE Install window. Click on OK to start the installation of the Java runtime environment. If, at the end of the installation of the Java Runtime Environment, the system asks for the execution of the PC reboot, answer No; execute the PC restart at the end of the installation of LCT.



After the check/installation of the Java runtime environment, the installation and configuration of LCT starts.



At the end of the installation, the window of completed installation opens (Fig. 5). Click on Finish. The final window asking the user for the PC restarting appears (Fig. 6).

WARNING It is recommended to confirm always if the system asks into the final window for the PC restarting.

6







The components of LCT are available into the Nokia Siemens Networks folder, created into the Start → Programs menu (Fig. 7).



The LCTStart application is managed by the LCT Services Manager service, which is installed as service of Microsoft Windows with automatic start-up modality (Fig. 8). The LCT Services Manager service is run as background process on the start-up of Microsoft Windows. When the LCT Services Manager service is running, the icon of the LCTStart application is present in the tray area of the desktop (Fig. 9). On the desktop the RunLCTStart command is available for the manual start of the LCTStart application (Fig. 10); this command must be used only if, for any reason, the LCT Start application is stopped.


7


Fig. 1 Installation of LCT (1/8)

Fig. 2 Maintenance of LCT

8








9




10








11




12



1.4



Maintenance and Remove procedure of LCT

After the installation the following procedures are available (Fig. 2): 

Repair: restores the already installed components of LCT. This option allows installing again all the already installed components of LCT, in case of operational or instability troubles concerning one or more application programs of LCT or in case of error during the setup procedure of LCT.



Remove: uninstalls all the installed components of LCT. This option allows removing completely the LCT application program.

WARNING Before executing the maintenance of LCT, it is necessary to close all the application programs of LCT actually in progress. WARNING The uninstallation of LCT does not remove the configuration files (map files, bitmaps) and the data files (log files, report files, ...) created by the users with the LCT applications. The maintenance procedure of LCT is the following one: 1. Run the setup program of LCT (file: “:\Setup.exe”). 2. The system displays the Welcome window (Fig. 3.10) that allows selecting the maintenance procedure type to execute. Click on Next to confirm the selection and to continue the maintenance procedure. If the Remove option has been selected, a confirmation for the removal of LCT is required. At the end of the maintenance, the window of completed maintenance opens. Click on Finish. The final window asking the user for the PC restarting appears. WARNING It is recommended to confirm always if the system asks into the final window for the PC restarting. WARNING Once LCT is removed, it is possible to have still displayed the removed components into the “Start” menu of Microsoft Windows. However, the system will remove the components from the “Start” menu of Microsoft Windows at the next restart of the PC.


13


1.5

Legal Log-in

At the restart of Client after the installation or after a reboot a legal log-in appear (Fig. 11). When a user logs on to the system the solution shall ensure that a message is displayed informing them that only authorised users are allowed access to the system in accordance with any legal obligations. Click OK to proceed.

Fig. 11 Legal Log-in window

14






15

LCT Installation Manual

Recommend Documents