Installation Guide Mso1 v3

INSTALLATION GUIDE FRONTIER WORKFLOW MANAGEMENT SOFTWARE

MS01 Software Version 3.0 Universal Guide for Service Technician Use

First Edition 30 October 2009

Copyright Notice © Copyright 2006-2009 FUJIFILM Corporation Frontier Workflow Management Software MS01 Installation Guide All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, translated, or stored in a retrieval system in any form or by any means, without the prior written consent of FUJIFILM Corporation.

Software Licensing Agreement PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE OPENING THIS PACKAGE OR USING THIS SOFTWARE. OPENING THIS PACKAGE OR USING THIS SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE WITH THESE TERMS AND CONDITIONS, PROMPTLY RETURN THIS SOFTWARE UNOPENED TO YOUR SUPPLIER AND YOUR MONEY WILL BE REFUNDED. This Software License Agreement is a legal document between you (a single entity) and FUJIFILM Corporation (the "Licensor") for the MS01 Frontier Workflow Management Software (the "Software"). The Software includes the Frontier Workflow Management Software MS01 software, the associated media, any printed materials and any electronic documentation. By using the Software, you agree to the terms of this Software License Agreement. The Licensor grants you a non-exclusive, non-transferable license to use one copy of the Software in object code only.

Ownership Retained By Licensor FUJIFILM Corporation owns all title and copyrights in and to the Software and the Licensor has the full right and authority to grant the license granted herein. Your license does not give you any title or ownership in the Software, nor is it a sale of any rights in the Software. The only right granted to you is the right to use the Software in accordance with the terms of this Software License Agreement. All rights not specifically granted to you under this Software License Agreement are reserved by the Licensor. You may make only a single copy of this Software as a backup copy, provided that it includes all notices and markings, including copyright, trademark and other proprietary notices as on the original. Such backup copy of the Software may not be in use at any time unless the original Software is damaged beyond use, and it must remain in your possession and control. You may not copy the Software onto any public network. You may not, and you may not allow others to, modify, disassemble, decompile, translate, reverse engineer, reproduce, make derivative works of or enhance the software. You may not, and you may not allow others to, rent, lease, sell, sublicense or otherwise transfer the Software to any other person. In addition to any other rights it may have, the Licensor may terminate this Software License Agreement if you fail to comply with the terms and conditions hereof. In such event, you must cease all use of the Software and destroy all copies of the Software and all of its component parts.

MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. i

At the Licensor's sole discretion, the Licensor may from time to time provide you with updates to the Software. Any such updates shall become part of the Software licensed to you hereunder and subject to all of the terms and conditions of this Software License Agreement.

Disclaimer of Warranties The Licensor expressly disclaims any and all warranties relative to the Software. THE SOFTWARE IS PROVIDED “AS IS," WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR OF PARTICULAR PURPOSE AND NON-INFRINGEMENT AND THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LICENSED PRODUCT IS WITH YOU.

Limitation of Liability In no event shall the Licensor be liable for any direct, special, incidental, indirect or consequential damages whatsoever to you (including, without limitation, damages for loss of profits, sales or data or for business interruption) arising out of the use of or inability to use the Software, even if the Licensor has been advised of the possibility of such damages. In any event, the Licensor's entire liability under any provision shall be limited to the greater of the amount actually paid by you for the Software or $25. Because some states and jurisdictions do not allow the exclusion or limitation of liability, the above limitation may not apply to you. If any provision of the Software License Agreement is declared by a court of competent jurisdiction to be invalid for any reason, such invalidity shall not effect the remaining provisions hereof.

Governing Law This Software License Agreement shall be governed by the laws of the State of New York without regard to conflict of laws principles.

Term This License Agreement is effective until terminated. You may terminate this License Agreement by returning the Licensed Product to Licensor. Licensor may terminate this License Agreement if you breach any of the terms and conditions. Upon termination of this License Agreement for any reason, you shall return the Licensed Product to Licensor. All provisions of this Agreement relating to disclaimers of warranties, limitation of liability, remedies, or damages, and Licensor's proprietary rights shall survive termination. YOU ACKNOWLEDGE YOU HAVE READ AND UNDERSTAND THIS AGREEMENT AND AGREE TO BE BOUND BY ITS TERMS. YOU FURTHER AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN YOU AND LICENSOR, AND SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS RELATING TO SUBJECT MATTER OF THIS AGREEMENT.

NY-177971 v3 0950000-102

MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. ii

Table of Contents

CHAPTER 1: INTRODUCTION .......................................................................................................................1 OVERVIEW ................................................................................................................................................................1 KNOW YOUR SYSTEM ..............................................................................................................................................2 ICIII Computer...............................................................................................................................................2 ICIII Supported Operating Systems ......................................................................................................3 Fujifilm Printers ..............................................................................................................................................3 Fujifilm Scanners ...........................................................................................................................................3 Third-Party Hardware ..................................................................................................................................3 SYSTEM TERMINOLOGY ...........................................................................................................................................4 CHAPTER 2: DETERMINING PROPER INSTALLATION..................................................................11 OVERVIEW ..............................................................................................................................................................11 DETERMINING INSTALLATION TYPE ......................................................................................................................11 DETERMINING INSTALLATION WORKFLOW ..........................................................................................................12 Overview.........................................................................................................................................................12 Full Installation > MS01 Server Setup Types...................................................................................13 Full Installation > Printer, Scanner, MS01 Workstation, MS01 Workstation with Printer Support, and High Capacity Image Processor Setup Types........................................................15 CHAPTER 3: INSTALLATION SETUP TYPES ........................................................................................17 OVERVIEW ..............................................................................................................................................................17 INSTALLATION SETUP TYPES ................................................................................................................................17 CHAPTER 4: FULL MS01 V3.0 INSTALLATION ..................................................................................19 MS01 SERVER .......................................................................................................................................................19 MS01 Server..................................................................................................................................................19 PRINTER ..................................................................................................................................................................25 Printer ..............................................................................................................................................................25 SCANNER ................................................................................................................................................................35 Scanner ...........................................................................................................................................................35 MS01 WITH PRINTER SUPPORT ...........................................................................................................................42 MS01 with Printer Support.......................................................................................................................42 MS01 WITH SCANNER SUPPORT .........................................................................................................................50 MS01 with Scanner Support....................................................................................................................50 MS01 WITH PRINTER AND SCANNER SUPPORT ..................................................................................................56 MS01 with Printer and Scanner Support ............................................................................................56 MS01 WORKSTATION ...........................................................................................................................................63 MS01 Workstation .......................................................................................................................................63 MS01 WORKSTATION WITH PRINTER SUPPORT ................................................................................................68 MS01 Workstation with Printer Support .............................................................................................68 HIGH CAPACITY IMAGE PROCESSOR ....................................................................................................................75 High Capacity Image Processor .............................................................................................................75 MS01 SERVER WITH TETHERED PRINTER...........................................................................................................80 MS01 Server with Tethered Printer ......................................................................................................80 CANCELLING INSTALLATION..................................................................................................................................87 MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. iii

CHAPTER 5: UPGRADING FROM MS01 V2.5.5.39656 TO V3.0................................................88 OVERVIEW ..............................................................................................................................................................88 INSTALLING THE V3.0 SOFTWARE UPDATE ON MS01 V2.5.5 SYSTEMS ........................................................89 ADDING DVD SUPPORT TO THE UPGRADED SYSTEM.........................................................................................96 >>> To add support DVD products .....................................................................................................96 NO-FRONTMAN CONFIGURATION SETTINGS ....................................................................................................102 >>> To configure No-FrontMan support for SP 1500, 2000, or 2500 Scanner................102 >>> To configure No-FrontMan support for SP 3000 Scanner ...............................................106 APPENDIX A: ADDITIONAL MS01 TASKS..........................................................................................109 DISABLING HYPERTHREADING (FMPC/LPC)...................................................................................................109 VDENTRY & 1394 FIREWIRE SETUP.................................................................................................................109 Preparation of FireWire Cards and Drivers ......................................................................................109 FireWire Card Installation ......................................................................................................................110 FireWire Driver Installation....................................................................................................................114 ADJUSTING THE SYSTEM’S DATE AND TIME PROPERTIES ................................................................................126 ENSURING ADEQUATE SPC/MCU DISK SPACE ...............................................................................................127 INSTALLING & CONFIGURING THE ASK 2000, 4000, & 4000A PRINTERS ...............................................131 TO BACK UP (SAVE) SETTINGS .........................................................................................................................137 APPENDIX B: INFORMATION ABOUT MS01.....................................................................................139 POWER FOR THE MS01 SYSTEM ........................................................................................................................139 Non-Connected Systems ........................................................................................................................139 Connected Systems ..................................................................................................................................139 SUPPORT MODE ...................................................................................................................................................140 OPERATOR MODE .................................................................................................................................................142 ACCESSING MAINTENANCE .................................................................................................................................144

MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. iv

Chapter 1: Introduction Overview This universal guide is intended for retail labs running Fujifilm systems regardless of location. Important: Review this entire guide to determine which sections apply to your lab before you begin installing any software. This installation guide provides details and instructions for installing Fujifilm’s Frontier Workflow Management Software (MS01) for retail lab systems internationally. It may need to be used in association with a regional or retailer-tailored guide. In this chapter, you will learn the various hardware pieces that can comprise a Fujifilm system (see page 2).

MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 1

Know Your System It is very important to know your system configuration before installing the MS software to ensure proper functionality and performance.

ICIII Computer The minimum hardware requirements for ICIII computers is: Items

Specification

CPU

Pentium 4, 3.4 GHz or more

Memory

2 GB or more

Hard Disk

160 GB

Clock Frequency

450 MHz or higher

External I/F

1000 BASE-TX USB 2.0 SCSI etc.

OS

Windows XP Professional SP2


Remarks

Two drive allocation: C and D

Depending on the peripheral equipment

ICIII Supported Operating Systems

Fujifilm Printers

Windows XP Service Pack 2

The MS01 software supports the following printer models:

Fujifilm Scanners The MS software supports the following scanner models: USB Scanners: o

SP 500

1394 FireWire Scanners: o

SP 1500

o

SP 2000

o

SP 2500

o

SP 3000

USB Printers o DPB 1500 Dry Lab Printer o ASK 1500 Dry Lab Printer o ASK 2000 Dry Lab Printer o ASK 4000 Dry Lab Printer o ASK 4000A Dry Lab Printer

Third-Party Hardware The MS01 software supports the following printer models:

1

Network Printers o DL 400 Inkjet Dry Lab Printer o DL 410 Inkjet Dry Lab Printer o DL 430 Inkjet Dry Lab Printer1 o LP 5000 Wet Lab Printer o LP 7000 Wet Lab Printer o LP 7100 Wet Lab Printer o LP 7200 Wet Lab Printer o LP 7500 Wet Lab Printer o LP 7600 Wet Lab Printer o LP 7700 Wet Lab Printer o LP 7900 Wet Lab Printer o SLP800 scanner/printer (330 system) o SLP1000 scanner/printer (340 system)

o

DYMO LabelWriter Printers

o

Epson Stylus Pro Wide Format Printers

o

Xerox Phaser Printer

o

Rimage CD Duplicators

o

Flatbed Scanners

1394 FireWire Printers: o LP 1500 Wet Lab Printer o LP 2000 Wet Lab Printer o LP 2500 Wet Lab Printer o LP 5500 Wet Lab Printer o LP 5700 Wet Lab Printer o LP 5900 Wet Lab Printer

This printer is installed via a separate installation guide. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 3

System Terminology 330 System

A tethered system consisting of an SLP 800 printer/scanner combination.

340 System

A tethered system consisting of an SLP 1000 printer/scanner combination.

350 System

A tethered system consisting of an LP 1500 wet lab printer and an SP 1500 or 2000 scanner.

355 System

A tethered system consisting of an LP 1500 wet lab printer and an SP 3000 scanner.

370 System


375 System


550 System


570 System


590 System


A1

Scanner software that works with the SP 1500, SP 2000, SP 2500, and SP 3000 scanners.

ASK

Dye-sublimation dry lab printers. See Fujifilm USB printers in this glossary.

B1

Variety Print Service for SP 2000/2500 scanners not using FrontMan.

B5

Single Scan Digitizing Software for SP 2000/2500 scanners not using FrontMan.

B7

Professional Scanning Software for SP 2000/2500 scanners not using FrontMan.

B8

Hyper Reorder Software for SP 2000/2500 scanners not using FrontMan.

B9

Tone Selection Software for SP 2000/2500 scanners not using FrontMan.

B11

Hyper Retouch Software for SP 2000/2500 scanners not using FrontMan.

backprint

Text printed on the reverse side of the print. Sometimes customizable.

CD

Compact disc. Referred to in MS01 as Disc.

connected

A connected MS01 system is a system that receives data from Fujifilm’s fulfillment network, sends data to Fujifilm’s Fulfillment Network, and receives orders from various sources (such as retailers and Fujifilm labs). This is accomplished via Internet connectivity.


Crop modes

MS01 offers different crop choices. For this example, assume that the original product size and image dimensions are: 8x10 Image

4x6 Product 3.5x5 Image

Fill in crop mode

Print area is filled with image and there may be image data lost if it does not match the aspect ratio of the print size selected. Output will have no white space. 8 x 10 Image

3.5 x 5 Image

Fit in crop mode

Fits the image into the size selected leaving it at its current aspect ratio to maintain all the image data. This will produce white space if the image is not the same aspect ratio as the size selected. 8 x 10 Image 3.5 x 5 Image

No resize crop mode

Image is rendered on the product without resizing. Takes the size selected and cuts out the center portion of the image (think of it as a cookie cutter). If the image is smaller than the size selected it will produce white space. 8 x 10 Image 3.5 x 5 Image


custom backprint

Backprint text specified by the operator; only replaces second line of backprint. Not all printers support the backprint feature. Also see backprint.

digital input

Digital images loaded into the system for printing (not film-based images). Examples include .jpg, .tif, and .gif image files generated from digital cameras.

Digital Link Request Spooler

One of the sub-applications of the MS01 system, this application performs all background processing for producing prints and CDs, receiving input from external sources such as kiosk, and communications with remote systems via the Internet. It also manages a database containing all production information, and is responsible for scheduling of tasks and devices throughout the system. This application is also known as Simon.

Dymo Label

A small label printer used to output labels for CDs, kiosk orders, Web orders, etc.

E5

Fujicolor CD/DVD Digital software (also known as Backup CD Service).

Epson Stylus Pro

Wide-format printer used in some Fujifilm regions. Supported models include 4880, 7800, and 7880.

FDD

Frontier Driver Direct. This service provides more control and greater messaging capabilities when printing.

FDIA

Fujifilm’s Frontier Digital Imaging Architecture.

FDIA DB

The database used by MS01 and other Fujifilm and third-party software to facilitate image transfer and order fulfillment.

FCIM

Frontier Communication Interface Module.

film type

A film type must be selected if creating prints from film. Options include color, black and white, and slide film.

Frontier

The name used to describe Fujifilm-developed systems.

FrontMan

The FrontMan software is an optional film input software interface included with MS01. (The FrontMan application window is also known as Main or the Order Entry screen.)

FMPC

Also known as the LPC and an abbreviation for Frontier Manager Printer Controller, the FMPC is a separate computer used to drive a laser printer (LP printer) and receive data from the scanner (if configured to do so). Note: Not all system configurations use an FMPC/LPC.

Fujifilm Printers (1394 FireWire)

LP 1500 Wet Lab Printer







Fujifilm Printers (Network)

DL 400 Inkjet Dry Lab Printer









SLP800 scanner/printer (330 system)


SLP1000 scanner/printer (340 system)


DPB 1500 Dry Lab Printer

ASK 2500 Dry Lab Printer




ASK 4000A Dry Lab Printer

Fujifilm Scanners (FireWire)

SP 1500

SP 2500

SP 2000

SP 3000

Fujifilm Scanners (USB)

SP 500

Fujifilm Printers (USB)

HCIP

High capacity image processor. This is a rendering device attached to the MS01 system. By having an HCIP attached to your MS01 system, its order processing speed is increased.

Hot Job

Provides an order with a prioritized status.

Hyper-Threading

Officially called Hyper-Threading Technology (HTT), this is Intel Corporation’s trademark for their implementation of the simultaneous multithreading technology on their Pentium 4 micro-architecture. The technology improves processor performance under certain workloads by providing useful work for execution units that would otherwise be idle, for example during a cache miss. A Pentium 4 with Hyper-Threading enabled is treated by the operating system as two processors instead of one.

IC

Imaging controller.

ICIII

Imaging Controller III computer, formerly known as PIC (photo imaging controller computer) and DIC (digital imaging controller computer).

Image Info

One of the sub-applications of the MS01 system, Image Info allows operators to see information about the image data.

Index Print

A supplementary print that displays image thumbnails.


Job Manager

One of the sub-applications of the MS01 system, Job Manager manages the images in MS01 orders. Also known as JobMan.

Kaleida

A Fujifilm printer used in some Fujifilm regions. Supported model includes PX-7550.

Local Disc Writer

This is a CD/DVD writer attached to the IC or an IC Workstation. This allows for one (1) CD to be written at a time. Local CD/DVD writers do not have the ability to print the labels automatically on the CD/DVDs.

Log Off

One of the sub-applications of the MS01 system, the Log Off function shuts down the application and also performs a Windows operating system log off.

LP (Laser Printer)

This is the abbreviation that pre-pends some Fujifilm printer model names. For example, LP 5000.

LPC

Also known as the FMPC, and an abbreviation for Laser Printer Controller, the LPC is one of the terms used as a name for the computer, which is separate from the ICIII computer that is used to drive a printer.

Maintenance

One of the sub-applications of the MS01 system, the MS01 Maintenance application houses the software used to configure the MS01 system. This is a different application than the Maintenance offered via the printer software.

MCU (Main Control Unit)

Known as the SPC in some regions, the MCU is the computer that drives the film scanner hardware. Note: The SP 500 runs via the ICIII without a separate SPC/MCU device.

Media

SD/Memory Stick/Compact Flash/xD Card/Compact Flash/CD/DVD used to store digital images.

MS01

Also known as the Frontier Workflow Management Software. This is the overall system, including the scanner software and the printer software. Operators should always use the system in Operator mode.

MS11

Scanner software that works with SP 500, 1500, 2000, 2500, and 3000 model scanners. This is a sub-component of the MS01 system.

MS12

Printer driver support software for Adobe Photoshop CS3 and CS4.

MS13

LAN spool software.

MS14

Variety Print Service software.

MS15

Variety Template Composite / Variety Templates software, including Template Editor.

MS16

Image-Adjust software. Also called 6-frame adjust.

MS17

Net Connection for FDI-net software.

MS18

Skin Color Correction Image Processing software.


MS19

Photo ID Print Service software.

Multi-Roll Order

A multi-roll order is an order that contains more than one roll of film. Each roll in a multiroll order has a unique Film ID (which is included in the backprint information).

Operator Mode

On the ICIII, this mode locks down the system so only Fuji applications can be used. After logging to Operator mode (default mode), Fuji applications automatically launch, and automatically re-launch if terminated.

Panda (Printer And Device Application)

One of the sub-applications of the MS01 system, Panda provides an interface between the Digital Link Request Spooler (Simon) and various devices, such as printers and CDwriters. It manages device operations and provides status and messages to the rest of the system in a consistent manner to ensure that devices may easily be interchanged or added, as needed.

Personality

Custom MS system settings associated with a particular Fujifilm region or retailer.

PIC

Photo Imaging Controller, now known as IC.

Product

On the MS01 system, each print created has an associated “product” file. For example, there are product files for 4x6-sized prints,

Production Manager

The mechanism in the MS01 system that manages routing ordered products to output devices for production. It also handles ordering the output based on due time, etc.

Promo Print

A product that enables retailers to print promotional offers (using the MS01 system) for distribution to consumers.

Puma

One of the sub-applications of the MS01 system, Puma is the mechanism used to display system messages (such as errors, warnings, and informational messages).

Red exclamation mark

This will power off the ICIII system. For proper shut-down procedures, see the MS01 Start-up and Shut-down Guide. On the FMPC, this is an emergency shutdown for only the Panda application. This will not power off the FMPC box. Note: This is not the proper shut-down procedure for this device; only do this if directed to do so by Technical Support. Important: For systems that are not connected to the Fujifilm fulfillment network, this function can be used as a proper method of shutting down the system. For systems that are connected to the Fujifilm fulfillment network, this should be treated as an emergency shut-down command only. By clicking this button, you are not performing a proper shut-down procedure. Only use this button if instructed to do so by Technical Support.

Retain Print Settings

Enables you to retain the size, surface, and color settings between orders.

Rimage

This is a third-party CD burning device designed for high volumes of CD creation. This system allows multiple CDs to be written simultaneously. The Rimage system can print labels directly onto CDs. Depending on the model of Rimage, it may have two or four CD burners and a single printer.

S3

Variety Print Service for SP 3000 scanners not using FrontMan.


S5

Professional Software for SP 3000 scanners not using FrontMan.

Scan Modes

Auto

When using film input, if the operator selects Auto as the scan mode, the system scans six images at a time without requiring the operator to press . Pressing any key on the keyboard will stop the Auto Mode and will allow image adjustments as in Semi Mode.

Manual

Manual operates just as semi mode operates, but you can choose size and quantity for each frame.

Semi

When using film input, if the operator selects Semi as the scan mode, the system scans six images at a time and the operator can correct the color and density on each image as necessary. The operator then presses to scan the next set of six images.

Software Launcher

This is a tool that allows the user to switch to any of the programs that are currently running. Also known as the Switcher application, this replaces the need for the Windows function.

SP

The abbreviation that pre-pends Fujifilm scanner model names. For example, SP 500.

SPC

Known as the MCU in some regions, this is the name for the computer that drives the scanner. Note: The SP 500 runs via the ICIII without a separate SPC/MCU device.

Summary Sheet

A print output that includes the file names of the images in the order.

Surface

Prints can be produced using different surface textures. Some printer models can only print on certain surface types. Surfaces include Glossy, Lustre, Matte, Silk, SupremeG, SupremeL, Thin, SupremeM, ThinGlossy, GlossyRoll, SatinRoll, SemiGlossBoard, CanvasRoll, CatsbyRoll, PearlRoll, SatinCanvasRoll, AquarellRoll, TalbotRoll, ScrimVinyl, and PearlPosterBoard.

Support Mode

On the ICIII, this mode allows the user to access the operating system. After logging to Support mode, Fuji applications automatically launch but do not re-launch if terminated.

Third-Party Printers

MS01 3.0 supports: Epson Stylus Pro Wide Format Printers Xerox Phaser Printers Rimage CD writers/printers

Whole Roll

A product type applied to an image that will make <#> of each image in the order.

Workstation

This is another digital input system for the MS01 software. It allows control of a printer, digital ingest, and CD/DVD burning.

Xerox printers

Color printers used in some Fujifilm regions. Supported models Phaser 7760, DPC4350, and DPC3360.


Chapter 2: Determining Proper Installation Overview There are various installation methods for the deployment of MS01 version 3.0. It is essential that you perform the correct installation.

Determining Installation Type Different Fujifilm regions and retailers currently run different versions of the MS01 software. For example: •

Some labs will need to install the MS01 software for the first time.

•

Some labs will need to upgrade from MS01 v2.5.5 to MS01 v3.0.

Some portions of installation are documented in separate guides; contact your Fujifilm subsidiary for the proper diagram for your lab. It is essential to use the proper guides for your lab/configuration when installing.

Installation instructions are included in this guide as follows: •

•

For new systems, to install a full version of MS01 3.0… •

On MS01 Server, MS01 Server with Printer Support, MS01 Server with Scanner Support¸ MS01 Server with Printer and Scanner Support, and MS01 Server with Tethered Printer, see page 13.

•

On Printer, Scanner, MS01 Workstation, MS01 Workstation with Printer Support, and High Capacity Image Processor, see page 15.

To upgrade from MS01 v2.5.5 to MS01 v 3.0, see page 88. When upgrading an MS01 v2.5.5 system, the order in which MS01 system hardware and software is installed varies based on setup type.


Determining Installation Workflow Overview The following installation checklists are categorized, as follows, based on the steps required during installation. o

For full installation workflow information for MS01 Server, MS01 Server with Printer Support, MS01 Server with Scanner Support¸ MS01 Server with Printer and Scanner Support, and MS01 Server with Tethered Printer setup types, see page 13.

o

For full installation workflow information for Printer, Scanner, MS01 Workstation, MS01 Workstation with Printer Support, and High Capacity Image Processor setup types, see page 15.


Full Installation > MS01 Server Setup Types MS01 Server

MS01 with Printer Support

MS01 with Scanner Support

MS01 with Printer and Scanner Support

MS01 Server w/ Tethered Printer

All configurations…ghost the system. (Refer to instructions provided by your Fujifilm subsidiary.) All configurations… verify the computer system’s date and time properties (see page 126). All configurations… perform additional pre-installation tasks. (Refer to instructions provided by your Fujifilm subsidiary.) Install the MS01 software on the ICIII, selecting MS01 Server as setup type (see page 19).

Install the MS01 software on the ICIII, selecting MS01 with Printer Support as setup type (see page 42).

Install the MS01 software on the ICIII, selecting MS01 with Scanner Support as setup type (see page 50).

Install the MS01 software on the ICIII, selecting MS01 with Printer and Scanner Support as setup type (see page 56).

Install the printer software & register the printer.

Install the scanner software.

Install the printer software & register the printer.

Install the MS01 software on the ICIII, selecting MS01 Server with Tethered Printer as setup type (see page 80).

Install the scanner software.

Install other MS01 setup types: o Required: Printer (refer to Printer checklist on page 15) o Optional: Workstation, HCIP After these additional

Proceed as follows: o If no other system hardware exists, proceed to the next step below. o If the system includes an MCU/SPC , install

Proceed as follows: o Required: Printer (refer to Printer checklist on page 15) OR Workstation with Printer Support (refer to Workstation with Printer Support checklist on page 15)


Proceed as follows: o If no other system hardware exists, proceed to the next step below. o Install optional MS01 setup types: Workstation & HCIP

Install other MS01 setup types: o If the system includes an MCU/SPC , install Scanner (refer to Scanner checklist on page 15)

MS01 Server

installations are complete, continue below.

MS01 with Printer Support Scanner (refer to Scanner checklist on page 15) o Install optional MS01 setup types: Workstation & HCIP (see checklists on page 15)

MS01 with Scanner Support o Install optional MS01 setup types: Workstation & HCIP (see checklists on page 15) After these additional installations are complete, continue below.

MS01 with Printer and Scanner Support

MS01 Server w/ Tethered Printer

(see checklists on page 15)

After this, additional installations are complete, continue below.

After these additional installations are complete, continue below.

After these additional installations are complete, continue below. If you chose ASK as the printer type during MS01 installation, perform tasks on page 131.

If you chose ASK as the printer type during MS01 installation, perform tasks on page 131.

All configurations… install additional, optional hardware software, such as the Epson Stylus wide format printer, Xerox Phaser printer, flatbed scanners, and DL 430 printer. All configurations… configure the MS01 software and perform necessary post-installation tasks (as defined by your Fujifilm subsidiary). Note: This step may not be necessary if your subsidiary has already customized your installer. All configurations… perform system backup (see page 109).


Full Installation > Printer, Scanner, MS01 Workstation, MS01 Workstation with Printer Support, and High Capacity Image Processor Setup Types Printer

Scanner

MS01 Workstation

MS01 Workstation with Printer Support

High Capacity Image Processor

Important: The MS01 Server must be powered on with the MS01 software running to enable successful installation on all computers in the system. Ghost the LPC/FMPC computer.

Ghost the MCU/SPC computer.

Ghost the Workstation computer.

Ghost the Workstation computer.

Ghost the HCIP computer.

(Refer to instructions provided by your Fujifilm subsidiary.) All configurations… verify the computer system’s date and time properties (see page 126). Disable the computer’s Hyper-Threading feature (see page 109). All configurations… perform additional pre-installation tasks as defined by your Fujifilm subsidiary. For the LP 1500, 2000, 2500, 5500, 5700, & 5900 printers only, perform FireWire and Vdentry tasks (see page 109). Otherwise, Install the MS01 software, selecting Printer as setup type (see page 25).

Install the appropriate scanner software based on scanner model.

Install the MS01 software, selecting MS01 Workstation as setup type (see page 63).

Install the MS01 software, selecting MS01 Workstation with Printer Support as setup type (see page 68).


Install the MS01 software, selecting High Capacity Image Processor as setup type (see page 75).

Printer

Scanner

MS01 Workstation

For the DL 4x0 and LP 7x00 printers, install the printer software & register the printer.

Install the MS01 software, selecting Scanner as setup type (see page 35).

MS01 Workstation with Printer Support


Install the printer software & register the printer. If you chose ASK as the printer type during MS01 installation, perform tasks on page 131.

For the LP 5000 printer, register the printer.

Otherwise, Install additional, optional components, such as the flatbed scanners and DL 430 printer.

Install additional, optional components, such as the Epson Stylus wide format printer, Xerox Phaser printer, flatbed scanners, DL 430 printer.

Install additional, optional components, such as the flatbed scanners and DL 430 printer.

Enable Event Viewer logging settings on the scanner’s SPC/MCU (refer to instructions provided by your Fujifilm subsidiary.) All configurations… configure the MS01 software and perform necessary post-installation tasks (refer to instructions provided by your Fujifilm subsidiary). Note: This step may not be necessary if your subsidiary has already customized your installer. All configurations… perform system backup (see page 109). If this installation was part of an MS01 Server installation (from the previous section), continue with that installation.


Chapter 3: Installation Setup Types Overview This chapter includes the information necessary to install a full version of the MS01 3.0 system on a new system.

Installation Setup Types When you run the installer, there will be a Setup Type screen that provides ten software installation options to choose from. The installation option you choose is determined by the hardware configuration of your system. MS01 Server Installation (see page 19).

Printer Installation (see page 25).

Scanner Installation (see page 35).

MS01 with Printer Support Installation (see page 42).

MS01 with Scanner Support Installation (see page 50).

MS01 with Printer and Scanner Support Installation (see page 56).


MS01 Workstation Installation (see page 63).

MS01 Workstation with Printer Support Installation (see page 68).

High Capacity Image Processor Installation (see page 75).

MS01 Server with Tethered Printer Installation (see page 80).

Cancelling Installation (see page 87).


Chapter 4: Full MS01 v3.0 Installation MS01 Server MS01 Server Installs the MS01 functionality on the ICIII server.

>>> To install MS01 Server: 1

Before beginning this installation, you must complete all pre-MS01 installation tasks referenced in the installation workflow table at the beginning of this guide (page 12).

2

Insert the MS01 Installation CD into the ICIII’s CD-ROM drive.

3

If the CD does not auto-run the installer, navigate to the CD-ROM drive via the Windows Start > Run or Explorer feature, and double-click the setup.exe file in the EZ171 directory. The software launches, and the Choose Setup Language screen displays.

4

Select the language that the software should display.

5

Click Next >.


A Preparing Setup screen displays and self-dismisses.

The Choose Setup Language screen closes, and the InstallShield Wizard launches, using the selected language.

6

Click Next >. The Setup Type > Select System Type screen displays.


7

From the drop-down menu, select MS01 Server.

8

Click Next >. The Setup Type > Additional Security screen displays.

9

10

o

To lock down the system to prevent the end user from accessing the operating system while running the Fuji software (operator mode), select the Add additional security to this system check box.

o

If Add additional security to this system is not selected, the system runs in Support mode2.

Click Next >.

2

The system can be run in two modes: Support (see page 140) or Operator (see page 142). Support mode allows full-access to the operating system; Operator mode does not. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 21

The Setup Type > Disc Writer Support screen displays.

11

12

o

If the system will be using a CD writer, select the Local Disc Writer option.

o

If the system will be using a Rimage CD duplication device, select the Rimage option.

o

If the system will not be writing CDs, select the None option.

Click Next >. The Edit Data > Enter the name of the FMPC system screen displays.

13

In the Printer field, enter the name of the FMPC/LPC to be connected to the printer. Note: Ensure that names do not exceed 15 characters.

14

Click Next >. Note: If an error dialog opens, then a component name has been incorrectly typed into an Edit Data screen. Click OK and the Edit Data information that needs to be changed will appear.


The Information screen displays.

15

Review the system information displayed in this screen.

16

If the information is incorrect, click < Back to navigate to previous selection screens, and modify settings, as appropriate. If the information is correct, click Next >. The Setup Status > Installing screen displays.

Installation progress completes for this screen, and subsequent installation progress screens open and self-dismiss. The installer completes this portion of the installation, and the system automatically restarts. WARNING: DO NOT REMOVE THE INSTALLATION CD FROM THE CD-ROM DRIVE. Once the system completely launches and the Windows desktop displays, a subsequent screen opens for additional installation progress.


An InstallShield Wizard Complete screen displays.

17

Ensure that the Yes, I want to restart my computer again. radio button is selected.

18

Remove the CD from the CD-ROM drive.

19

Click Finish. The system restarts. Fujifilm applications launch.

20

Proceed following the installation workflow referenced on page 13; subsequent installations are required.


Printer Printer Installs the printer functionality on the FMPC/LPC. Supported printers in this configuration include network and FireWire printers.

Hardware Associated with this Setup Type This setup type should be selected only when installing on the LPC/FMPC computers associated with the following printers: LP 5000 printer

LP 7600 printer

LP 1500 printer

LP 7000 printer

LP 7700 printer

LP 2000 printer

LP 7100 printer

LP 7900 printer

LP 2500 printer

LP 7200 printer

DL 400 printer

LP 5000 printer

LP 7500 printer

DL 410 printer

LP 5500 printer LP 5700 printer

Note: The DL 430 printer is installed via separate printer software.

Note: The printers listed above require FireWire and VDEntry tasks completed before MS01 installation.


>>> To install Printer only: 1


2

All FireWire drivers must be installed and VDEntry settings must be completed prior to starting this procedure.

3

Insert the MS01 Installation CD into the FMPC’s/LPC’s CD-ROM drive.

4


5


6

Click Next >. The Choose Setup Language screen closes, and the InstallShield Wizard launches, using the selected language.

7

Click Next >.


The Setup Type > Select System Type screen displays.

8

From the drop-down menu, select Printer.

9

Click Next >. The Setup Type > Please select type of printer screen displays.


10

From the drop-down menu, select the printer for this configuration.

11

Click Next >. The Setup Type > Disc Writer Support screen displays.

12

13

o


o


Click Next >.


The Setup Type > What type of scanner will this printer be used with? screen displays.

14

Select the type of scanner that will be connected to the LPC/FMPC.

15

Click Next >. The Edit Data > Enter the names of the MS01 & SP systems screen displays.

Note: The Scanner field only displays if you are installing the SP 1500, 2000, 2500, and 3000 models.


Note: If you selected None when selecting your scanner type, the Edit Data screen does not display a Scanner field.

16

Edit the ICIII and Scanner server names ensuring that the names do not exceed 15 characters.

17

Click Next >. The Information screen displays.

Note: If an error dialog opens, then a component name has been incorrectly typed into an Edit Data screen, or the ICIII isn’t accessible via the network. Click OK and the Edit Data information that needs to be changed will appear.

18


19

If the information is incorrect, click < Back to navigate to previous selection screens, and modify settings, as appropriate. If the information is correct, ensure that the printer is in StandBy mode and click Next >.


The Setup Status > Installing screen displays.


20

If you selected None during scanner model selections, an InstallShield Wizard Complete screen displays. Ensure that the Yes radio button is selected. Click Finish. The system restarts. Fujifilm applications launch. Proceed following the installation workflow referenced on page 15; subsequent installations are required. If you are installing an LP 1500/2000/2500 series printer…

If you are installing an LP 7x00 , LP 5000 or DL 4x0 series printer…

If you are installing an LP 5500/5700/5900 series printer…

The InstallShield Wizard > Frontier Workflow Management Software – InstallShield Wizard dialog box opens informing you that the printer update will run.

An InstallShiel d Wizard Complete screen displays.

The status halts and the InstallShield Wizard > Printer Data dialog box opens.

Click OK.

Select the No radio button.

Insert the Printer Data diskette into the printer’s floppy drive.

The Please Wait message displays and self-dismisses.

Click Finish.

Click OK.

The status halts and the InstallShield Wizard > Printer Data dialog box opens.

Insert the printer software disk into the CD-ROM drive.

The printer reads the floppy data.

Insert the Printer Data diskette into the printer’s floppy drive.

Install the printer software and register the printer.

Once the data load has finished, the InstallShield Wizard > Printer Data load finished dialog box opens.

Click OK.

Restart the computer.

Remove the floppy diskette from the floppy drive and click OK.


The printer reads the floppy data.

Fujifilm applications launch.

The InstallShield Wizard > Frontier Workflow Management Software – InstallShield Wizard dialog box opens informing you that the printer update will run.

Once the data load has finished, the InstallShield Wizard > Printer Data load finished dialog box opens.


Click OK.

Remove the floppy diskette from the floppy drive and click OK.

The Please Wait message displays and self-dismisses.

MS01 installation progress continues.

MS01 installation progress continues.

Finally, an InstallShield Wizard Complete screen displays.

Finally, an InstallShield Wizard Complete screen displays.

Ensure that the Yes radio button is selected.


If you are installing an LP 1500, LP 2000, or LP 2500 printer, you must turn the printer power off and then back on using the breaker.


Wait until the Standby or Warming up message appears on the printer operation panel before moving to the next step. Remove the CD from the CD-ROM drive.

Click Finish. The system restarts. Fujifilm applications launch. Proceed following the installation workflow referenced on page 15; subsequent installations are required.

Click Finish.


Fujifilm applications launch. A printer message may display. Wait for the printer message to self-dismiss. Note: When the message “Printer memory has been updated” appears, click OK to close the message. Important: Do not turn the printer power off during this process. Fujifilm applications launch. Proceed following the installation workflow referenced on page 15; subsequent installations are required.


Scanner Scanner Installs the scanner functionality on the SPC/MCU. Supported scanners in this configuration include FireWire scanners only.

IMPORTANT: Verify available disk space on the SPC/MCU before starting this procedure. This task is only required for the certain scanner hardware models, including: SP 1500, 2000, or 2500. After an SP 1500, 2000, or 2500 system’s SPC/MCU is ghosted, perform tasks to prevent lack-of-space issues (see page 127).

Hardware Associated with this Setup Type Important: The scanner software must be installed before you start the following procedure. This setup type should only be chosen when installing on the computers associated with the following scanners: SLP-800 (tethered only)

SP-2000 scanner

SLP-1000 (tethered only)

SP-2500 scanner

SP-1500 scanner

SP-3000 scanner

>>> To install scanner only: 1


2

Before performing this installation, you must have already completed: a. If you are installing on a system configured with the SP3000 scanner, the A1 and MS11 software must both be installed before starting this procedure. b. If you are installing on a system configured with the SP 1500/2000/2500 scanner, o If you plan on using the FrontMan software for film scanning, the A1 and MS11 software must both be installed before starting this procedure. o If you do NOT plan on using the FrontMan software for film scanning, only the A1 software must be installed before starting this procedure.

3

Insert the MS01 Installation CD into the SPC’s/MCU’s CD-ROM drive. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 35

4

Post-op the system.

5

Power on the scanner while holding down the keyboard key (to prevent the scanner software from launching).

6


7


8


9

Click Next >.



10

Select Scanner.

11

Click Next >. The Setup Status > Select Scanner Type screen displays.


12

Select the scanner type in your configuration.

13

Click Next >. The Setup Status > Select FrontMan or No FrontMan screen displays.

14

15

Select the appropriate option for this lab’s configuration. o

Selecting YES will ensure that FrontMan is the software used for film scanning.

o

Selecting NO will ensure that the A1 and MS11 software are used when film scanning.

Click Next >.


The Edit Data > Enter the name of the MS01 system screen displays.

16

Enter the name of the ICIII. Note: Ensure that names do not exceed 15 characters.

17

Click Next >.

18

If this is a tethered system, a screen opens asking if you want to load the printer size table. o

Select Yes if you want to load the print size table for the default products loaded by the software. Doing this will overwrite any changes made to the print size table since the last installation. This is the recommended choice.

o

Select No if you want to manually enter all print sizes that you will want the scanner and printer to process.

Click Next >. A screen displays asking you whether or not you want to user the FrontMan software for film scanning.

19

Select Yes if you want to use the FrontMan software interface when film scanning. Select No if you want to use the A1/S1 software interface when film scanning.


20

Click Next >. The Information screen displays. Note: You ICIII System Name may differ from the example displayed here. Note: If an error dialog opens, then a component name has been incorrectly typed into an Edit Data screen, or the ICIII is inaccessible via the network. Click OK and the Edit Data information that needs to be changed will appear.

21


22




23


24


25


26



MS01 with Printer Support MS01 with Printer Support Installs the MS01 and printer functionality on the ICIII server. Supported printers in this configuration include network and USB printers. Supported scanners in this configuration include FireWire scanners only.

Hardware Associated with this Setup Type This setup type should be selected only when installing on ICIII computers serving as the LPC/FMPC for the following printers: LP 5000 printer

LP 7700 printer

LP 7000 printer

LP 7900 printer

LP 7100 printer

ASK

LP 7200 printer

DL 400 printer

LP 7500 printer

DL 410 printer

LP 7600 printer



>>> To install MS01 with Printer Support: 1


2


3


4


5


6

Click Next >.



7

Select MS01 with Printer Support.

8



9

o

If you want to lock down the system to prevent the end user from accessing the operating system while running the Fuji software (operator mode), select the Add additional security to this system check box.

o

If Add additional security to this system is not selected, the system runs in Support3 mode.


10

11

o


o


o



3

The system can be run in two modes: Support or Operator. Support mode allows full-access to the operating system; Operator mode does not. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 45

12

From the drop-down menu, select the printer for this configuration. Note: Select None if you will be installed a printer that is installed via separate printer software (such as the DL 430).

13

Click Next >. Note: If you selected ASK in the previous screen, a subsequent screen displays the possible ASK models and configurations. Select the option applicable to your ASK configuration, and click Next.

The Setup Type > What type of scanner will this printer be used with? screen displays.


14

Select the type of scanner that will be connected to the MS01 Server.

15

Click Next >. If you selected None, this screen will not appear. Proceed to the next step.

If you selected a scanner model number in the previous step, the Edit Data screen displays.

If necessary, edit the Scanner server name. Note: Ensure that names do not exceed 15 characters.

Click Next >.

The Information screen displays. Note: If an error dialog opens, then a component name has been incorrectly typed into an Edit Data screen. Click OK and the Edit Data information that needs to be changed will appear. 16

Review the system information displayed in the body of the screen.


17

If the information is incorrect, click < Back to navigate to previous selection screens, and modify settings, as appropriate. If the information is correct, click Next >. The Setup Status > Installing screen displays. Once progress completes, several small installation screens open and self-dismiss.

The system automatically restarts, and the InstallShield wizard continues with installation.



18

Remove the MS01 Installation CD from the CD-ROM drive.

19

If you are installing an LP 5000 or ASK series printer…

If you are installing an LP 7x000 or DL 4x0 series printer…



Click Finish.

Click Finish. The InstallShield Wizard closes.

The system restarts, and the Windows desktop displays.




A printer message may display. Wait for the printer message to self-dismiss.


When the message “Printer memory has been updated” appears, click OK to close the message. Important: Do not turn the power-off the printer during this process. 20


21

Proceed following the installation workflow referenced on page 13; subsequent installations are required. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 49

MS01 with Scanner Support MS01 with Scanner Support Installs the MS01 and scanner functionality on the ICIII server. Supported scanners in this configuration include USB scanners only. Printer support should be added via a separate computer.

Hardware Associated with this Setup Type This installation setup type is only applicable with an SP 500 scanner; these scanners use the MS01 Server as their SPC/MCU computer.

>>> To install MS01 with Scanner Support: 1


2


3


4



5


6



7

Select MS01 with Scanner Support.

8


9

o


o

If Add additional security to this system is not selected, the system runs in Support4 mode.

Click Next >.

4

The system can be run in two modes: Support or Operator. Support mode allows full-access to the operating system; Operator mode does not. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 52

The Setup Type > Disc Writer Support screen displays.

10

11

o


o


o


Click Next >. The Edit Data screen displays.

12

If necessary, edit the Printer server name field: Note: Ensure that names do not exceed 15 characters.

13

Click Next >.



Note: If an error dialog opens, then a component name has been incorrectly typed into an Edit Data screen. Click OK and the Edit Data information that needs to be changed will appear.

14


15


Once progress in the screen completes, several small installation screens open and self-dismiss. The system automatically restarts during installation. WARNING: DO NOT REMOVE THE INSTALLATION CD FROM THE CD-ROM DRIVE.



16


17

Remove the MS01 Installation CD and insert the MS11 for SP500 installation CD into the CD-ROM drive.

18

Click Finish. The system restarts.

19



MS01 with Printer and Scanner Support MS01 with Printer and Scanner Support Installs the MS01, printer, and scanner functionality on the ICIII server. Supported printers in this configuration include network and USB printers. Supported scanners in this configuration include USB scanners only.

Hardware Associated with this Setup Type This installation setup type is only applicable with an SP 500 Scanner. SP 500 scanners no longer have separate computers (SPCs/MCUs); these scanners now use the MS01 ICIII Server as their SPC/MCU computer. This setup type should be chosen when installing on the computers associated with the following printers: LP 5000 printer

LP 7700 printer

LP 7000 printer

LP 7900 printer

LP 7100 printer

ASK

LP 7200 printer

DL 400 printer

LP 7500 printer

DL 410 printer

LP 7600 printer



>>> To install MS01 with Printer and Scanner Support: 1


2


3


4


5


6

Click Next >.



7

Select MS01 with Printer and Scanner Support.

8



9

10

o


o

If Add additional security to this system is not selected, the system runs in support mode.


11

12

o


o


o




13


14



15


16

If the information is incorrect, click < Back and modify settings, as appropriate. If the information is correct, click Next >.



Once progress in the screen completes, several small installation screens open and self-dismiss. The system restarts. WARNING: DO NOT REMOVE THE INSTALLATION CD FROM THE CD-ROM DRIVE. The InstallShield wizard continues with installation. An InstallShield Wizard Complete screen displays.

17

Reference the following instructions based on your hardware configuration.


18

LP 7x00 / DL 4x0 + SP 500 Scanners

ASK / LP 5000 + SP 500 Scanners

a

If you are installing a 7x00-series printer with an SP 500 model scanner, an InstallShield Wizard Complete screen displays.

a

If you are installing an ASK or LP 5000 model printer with an SP 500 model scanner, an InstallShield Wizard Complete screen displays.

b

Select the No radio button (so the system does NOT restart).

b

Select the No radio button (so the system does NOT restart).

c

Click Finish. The MS01 installer closes.

c

Click Finish. The MS01 installer closes.

d

Insert the printer’s SDK installation CD and run the installer.

d

Insert the MS11 for SP 500 installation CD and run the installer.

e

Perform all instructions noted during the printer installation.

e

Perform all instructions noted during the scanner installation.

f

Insert the MS11 for SP 500 installation CD and run the installer.

f

Once the scanner installation is complete, restart the system.

g

Perform all instructions noted during the scanner installation.

h

Once the installation is complete, restart the system.



MS01 Workstation MS01 Workstation Select this option when additional MS01 workstation computers are added to the system. A scanner is not connectable to a workstation.

>>> To install MS01 Workstation: 1


2

Insert the MS01 Installation CD into the ICIII workstation’s CD-ROM drive.

3


4


5

Click Next >.



6


7

Select MS01 Workstation.


8


9

10

o


o



11

12

o


o


Click Next >.


The Edit Data > Enter the name of the MS01 system screen displays.



13


14




Once progress in the screen completes, several small installation screens open and self-dismiss. The system restarts. WARNING: DO NOT REMOVE THE INSTALLATION CD FROM THE CD-ROM DRIVE, the InstallShield wizard continues with installation. Finally, an InstallShield Wizard Complete screen displays.

15


16


17


18

Proceed following the installation workflow referenced on page 15; subsequent installations are required. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 67

MS01 Workstation with Printer Support MS01 Workstation with Printer Support Select this option to install additional MS01 workstation computers with added printer support (additional printer). Supported printers in this configuration include network and USB printers. A scanner is not connectable to a workstation.

Hardware Associated with this Setup Type This setup type should be chosen when installing on the computers associated with the following: LP 5000 printer

LP 7700 printer

LP 7000 printer

LP 7900 printer

LP 7100 printer

ASK

LP 7200 printer

DL 400 printer

LP 7500 printer

DL 410 printer

LP 7600 printer


>>> To install MS01 Workstation with Printer Support: 1


2

Insert the MS01 Installation CD into the ICIII workstation’s CD-ROM drive.

3

If the CD does not auto-run the installer, navigate to the CD-ROM drive via the Windows Start > Run or Explorer feature, and double-click the setup.exe file in the EZ171 directory.


The software launches, and the Choose Setup Language screen displays.

4


5


6

Click Next >.



7

Select MS01 Workstation with Printer Support.

8



9

10

o


o



11

12

o


o




13


14

Click Next >. The Edit Data > Enter the name of the MS01 system screen displays.

15

Edit the ICIII server name.

16

Click Next >.




17


18

If the information is incorrect, click < Back and modify settings, as appropriate. If the information is correct, click Next >. The Setup Status > Installing screen displays.

Once progress in the screen completes, several small installation screens open and self-dismiss. The system restarts. WARNING: DO NOT REMOVE THE INSTALLATION CD FROM THE CD-ROM DRIVE. The InstallShield wizard continues with installation.



Remove the MS01 Installation CD and insert the printer software installation CD into the CD-ROM drive. 19

If you are installed an LP 5000 or an ASK series printer…

If you are installing an LP 7x00 or DL 4x0 series printer…



Click Finish.

Click Finish.

The system automatically restarts, and the Windows desktop displays.




A printer message may display.


Wait for the printer message to selfdismiss.


Note: When the message “Printer memory has been updated” appears, click OK to close the message. Important: Do not turn the printer power off during this process. 20



High Capacity Image Processor High Capacity Image Processor Select this option to install an additional rendering computer, which is used for high-volume labs. Printers and scanners are not connectable to a High Capacity Image Processor.

>>> To install High Capacity Image Processor: 1


2

Insert the MS01 Installation CD into the High Capacity Image Processor’s CD-ROM drive.

3


4


5

Click Next >.



6


7

Select High Capacity Image Processor.


8


9

Ensure that the check box is cleared (not selected).

10

Click Next >. The Edit Data > Enter the name of the MS01 system screen displays.

11

If necessary, edit the ICIII server name.

12

Click Next >.




13


14

If the information is incorrect, click < Back and modify settings, as appropriate. If the information is correct, click Next >. The Setup Status > Installing screen displays.

Once progress in the screen completes, several small installation screens open and self-dismiss. The system restarts. WARNING: DO NOT REMOVE THE INSTALLATION CD FROM THE CD-ROM DRIVE. The InstallShield wizard continues with installation.



15

Ensure that the Yes, I want to restart my computer again. radio button is selected. Remove the CD from the CD-ROM drive.

16

Click Finish. The system automatically restarts, and the Windows desktop displays. Fujifilm applications launch.

17



MS01 Server with Tethered Printer MS01 Server with Tethered Printer This is a legacy configuration where the printer and scanner are connected to each other via FireWire. The scanner is connected to the ICIII via network connection.

Hardware Associated with this Setup Type This setup type should be chosen when installing on the computer associated with the following: SLP 800 scanner/printer

LP 2500 printer

SLP 1000 scanner/printer

LP 5500 printer

LP 1500 printer

LP 5700 printer

LP 2000 printer

LP 5900 printer

>>> To install MS01 with Tethered Printer: 1


2

Insert the MS01 Installation CD into the ICIII server’s CD-ROM drive.

3

If the CD does not auto-run the installer, navigate to the CD-ROM drive via the Windows Start > Run or Explorer feature, and double-click the setup.exe file in the EZ171 directory.


The software launches, and the Choose Setup Language screen displays.

4


5


6

Click Next >.



7

Select MS01 Server with Tethered Printer.

8



9

o


o



10

11

o


o


o


Click Next >. The Setup Type > Please select type of tethered printer screen displays.


12


13

Click Next >.

14

The Setup Type > select scanner screen displays. Select the appropriate scanner model.

15

Click Next >.


An Edit Data screen displays.

16

Enter the scanner’s name in the Scanner field.

17



18


19





20


21


22

Click Finish. The system restarts, and the Windows desktop displays.

23



Cancelling Installation Anytime during the software installation process, you can stop the installation. 1

After invoking cancellation, an Exit Setup dialog box opens.

2

Click Yes. If cancellation was invoked from the Choose Setup Language screen, the Preparing Setup screen, or after the auto-restart that occurs during the installation process, the installer simply closes.

If cancellation was selected from the Welcome screen or any other screen before the auto-restart that occurs during installation, an InstallShield Wizard Complete screen displays informing you that the software has not been installed.

Click Finish. The InstallShield Wizard closes, and installation is cancelled.


Chapter 5: Upgrading from MS01 v2.5.5.39656 to v3.0 Overview In this chapter, instructions are provided for: o

Upgrading your MS01 version 2.5.5 system to MS01 version 3.0 (see below).

o

Adding DVD support to the upgraded system, if desired. This optional configuration is applicable for all system types; see page 95.

o

Adding No-FrontMan support to the upgraded system, if desired. If you were formerly using the FrontMan software for film scanning on SP 1500, 2000, 2500, and 3000 systems and no longer want to use it (also known as “no-FrontMan” configurations), see page 102.


Installing the v3.0 Software Update on MS01 v2.5.5 Systems Note: If the following error opens when you begin installation, then the system is not currently-installed with an upgradable version of MS01.

1

Ensure that all orders in the system have completed and have the status Done / Done.

2

Delete all orders from the system.

3

IMPORTANT: Before starting this installation procedure, if you are currently running a FrontMan scanner system and plan to change it to a no-FrontMan system OR you plan on upgrading the MS11 software already on the system, you MUST perform the following tasks BEFORE upgrading your MS01 Server to MS01 version 3.0: 1. Upgrade MS11, and then… 2. Upgrade MS01 to version 3.0.

4

Additionally, before upgrading any system type (FrontMan and no-FrontMan) to version 3.0, you must backup production data by performing the following steps: a

Ensure that your focus is on the LPC.

b

Enter the printer’s Maintenance application by accessing Panda and clicking the 4 – Maintenance button.


A Password Entry dialog box opens.

c

Enter the password.

d

Click OK. The Maintenance Menu Selection screen displays.

e

Select 1 System Operational Setup and Check. The menu expands.

f

Select [413] Accumulated Production Information.

g

Click OK.


The [413] Accumulated Production Information dialog box opens.

h

Select the desired device and From date.

The dialog box populates based on selections made.

i

Click Save.


A Save Production History dialog box opens.

j

Select the location you would like to save the production information to.

k

Write this information down for use when installing MS01.

l

Click OK. The data is saved, and the dialog box closes. Focus returns to the [413] Accumulated Production Information dialog box.

m

Click OK. The dialog box closes, and focus returns to the Maintenance Menu Selection screen.

n

Click Cancel to close the Maintenance Menu Selection screen. The Panda screen returns to focus.

5

o

Click the close box button to close the Panda screen.

p

After upgrading (see below), you can access the production file you just saved and open it with Microsoft Notepad to view the contents.

You will be upgrading the software on the MS01 Server first. Therefore, with the exception of the MS01 Server, power-off all computers in the system.

6

On the MS01 Server, insert the MS01 3.0 installation CD into the ICIII’s CD-ROM drive (i.e., the ICIII installed as MS01 Server). Important: If the lab’s system includes multiple computers, such as an SPC/MCU, FMPC/LPC, etc., you will need to install this on every computer in the lab, the software will not automatically propagate from the MS01 Server through the system.

7

Log the system off to Support mode (see page 140).


The system logs off automatically, and launches the InstallShield Wizard.

8

Select the preferred language.

9

Click Next. A Preparing Setup screen displays…

… and then the Welcome screen displays.

10

Click Next.


A Question dialog box opens asking if you want to upgrade.

11

Click Yes. Installation begins, and multiple screens display.

After installation finalizes, an InstallShield Wizard Complete screen displays.


12


13


14

Click Finish. The system restarts.

15

Ensure that you leave the ICIII powered on and that the MS01 software is running.

16

Using the above steps (6-11), install the remaining computers in the system in the following order. If installed in the following order, a complete system restart is not required; do NOT install more than one computer at a time. Important: The MS01 Server must be powered on with the MS01 software running to enable successful installation on all computers in the system. 1. LPC/FMPC 2. SPC/MCU 3. Workstation 4. High Capacity Image Processor Instructions to launch the installer on these systems: 1. Pressing the keyboard key, power-on the computer. 2. Wait until the computer’s operating system is fully-launched, and release the key. 3. Insert the MS01 Installation CD into the computer’s CD-ROM drive. 4. Select Start > Run; the Run dialog box opens. 5. Launch the installer via the Run dialog box. (Go to Start > Run, and browse to EZ171\setup.exe on your CD-ROM drive. in the Open field. Click OK. The executable launches).

17

For tethered systems only, after the upgrade is complete go to the product setup area of MS01 Maintenance and review the products available on the scanner because the upgrade does not convert products with a name greater than five (5) characters in length. Modify products, as necessary.

18

If the system is not using manual routing, the process is complete.

If the system is using manual routing with DL 4x0 and LP 7x00 mode printers, perform the following on the MS01 Server only. a.

From the View Orders or View Images screen, click the MS01/ICIII device status icon.

b.

The Request Spooler Processing Queue window opens.

c.

Click the Routing tab.

d.

Click the Analyze button.

e.

Close the Request Spooler Processing Queue window via the close box button.

f.

The process is complete.


Adding DVD Support to the Upgraded System >>> To add support DVD products 1

Click 0805 Digital Products Setup. The Digital Products Setup dialog box opens.

2

Click the Load button. A Digital Products Setup dialog box opens.

3

Click the Yes button.


The Digital Products Setup dialog box opens, and progress displays and self-dismisses.

4

Click the Load button. The Load and Remove Products dialog box opens.

5

From the Products on the file system list, select the following files: ArchiveDVD IndexDVD

6

Click the Add >>button.


The products are added to the Currently installed products list (right).

7

Click OK. Progress displays.

8

Click OK.


The Digital Products Setup dialog box returns to focus.

9

Click OK to close the Digital Products Setup dialog box. Progress displays, the dialog box closes, and the Maintenance screen returns to focus.

10

Click Close. The Maintenance application closes.

11

From the Switcher application, click the Panda button. The Panda application window opens.


12

Select DiscWriter1 from the list box.

13

Press and hold down the keyboard key, and click the Setup button. The Writer Setup dialog box opens.

14

Select DVD from the Media list box.


Select the Available check box.

15

Click OK. The dialog box closes, and focus returns to the Panda application window. After a few seconds, DVD displays in the Media list box.

16

Close the Panda application window.

17

If the system is not using manual routing, proceed to the next step below.

If the system is using manual routing:

a.

From the View Orders or View Images screen, click the MS01/ICIII device status icon.

b.

The Request Spooler Processing Queue window opens.

c.

Click the Routing tab.

d.

Click the Analyze button.

e.

Close the Request Spooler Processing Queue window via the close box button.


No-FrontMan Configuration Settings In this section, instructions are provided for: o

Adding No-FrontMan support for an SP 1500, 2000, and 2500 model scanner (see below).

o

Adding No-FrontMan support for an SP 3000 model scanner (see page 106).

>>> To configure No-FrontMan support for SP 1500, 2000, or 2500 Scanner On the SPC/MCU: 1

Minimize FrontMan. The A1 Order Entry screen displays.

2

From the top menu bar, select Quit. The Main Menu displays.

3

Select 4 Setup and Maintenance.

4

Click OK. A Login screen displays.


5

From the User Name drop-down menu, select SE2.

6

In the Password field, enter your password.

7

Click OK. The Setup and Maintenance screen displays.

8

Select the + symbol for menu item 9) Special Operations. The menu expands.

9

Select B Explorer.

10

Click the Start button. A Windows Explorer window opens over the Setup & Maintenance screen. NOTE: Leave this window open though you will not be using it. It needs to remain open for you to access the Windows Start menu.

11

Simultaneously, press and keyboard keys.


The Windows Start menu displays.

12

Select Maintenance.

The MS01 Maintenance application opens displaying only scanner options.


13

Navigate to Maintenance > 02 System Settings > 0201 FrontMan.

The FrontMan Setup dialog box opens.

14

Clear the Use FrontMan application for scan orders check box.

15

Click OK. The FrontMan Setup dialog box closes. An error dialog box opens.


16

Click OK. The dialog box closes.

17

As instructed, restart the entire system.

>>> To configure No-FrontMan support for SP 3000 Scanner On the SPC/MCU: 1

Minimize FrontMan. The Printing with Film-Order Information screen displays.

2

Click the Main Menu button (located in the bottom right corner of the screen). The Main Menu screen displays,

3

Simultaneously, press and keyboard keys. The Windows Start menu displays.

4

Select Maintenance.


The MS01 Maintenance application opens displaying only scanner options.

5

Navigate to Maintenance > 02 System Settings > 0201 FrontMan.

The FrontMan Setup dialog box opens.

6

Clear the Use FrontMan application for scan orders check box.

7

Click OK.


The FrontMan Setup dialog box closes. An error dialog box opens.

8

Click OK. The dialog box closes.

9

As instructed, restart the entire system.


Appendix A: Additional MS01 Tasks Disabling HyperThreading (FMPC/LPC) Before ghosting the FMPC/LPC system, it is necessary to verify that Hyper-Threading is disabled in BIOS. If it is not, is must be disabled before starting.

VDEntry & 1394 Firewire Setup This task is only required for the certain hardware devices, including: LP 1500, 2000, 2500, 5500, 5700, 5900 printers and the SP 1500, 2000, 2500, and 3000 scanners.

Preparation of FireWire Cards and Drivers If you are installing only a FireWire film scanner to the MS01 Server or Printer Server5, perform the following: If there is a FireWire card in the ICIII, write down which port the scanner FireWire cable is connected to, then disconnect the cable. If there is no FireWire card installed in the ICIII, refer to page 110. •

Install FireWire drivers on the ICIII Server. Refer to page 114.

•

If using an SP 3000 film scanner, refer to page 121.

•

If using an SP 1500, SP 2000 or SP 2500 film scanner, refer to page 119.

•

For Disabling FireWire Networking for the SP 1500/2000/2500/3000 Scanners, refer to page 124.

If you are installing only a FireWire scanner and printer connected to the printer server6, perform the following: If there are FireWire cards in the Printer Server, write down which port the scanner FireWire cable is connected to, write down which port the printer FireWire cable is connected to, then disconnect both cables. If there are no FireWire cards installed in the Printer Server, refer to page 111. •

Install FireWire drivers on the Printer Server. Refer to page 114

•

If using an SP 3000 film scanner, refer to page 121.

•

If using an SP 1500, SP 2000 or SP 2500 film scanner, refer to page 123.

•

If using an LP5500, LP5700 or LP5900 printer, refer to LP5500, LP5700 or LP5900 Printer on page 115.

•

If using an LP1500, LP2000 or LP2500 printer, refer to LP1500, LP2000 or LP2500 Printer on page 116.

5

If you are installing an MS01+Printer system with an SP1500, SP2000, SP2500 or SP3000 film scanner, there must be a single FireWire card in the ICIII server. 6 If you are installing a Frontier Manager system with an ICIII Server, Printer Server (also known as LPC or FMPC), SP1500, SP2000, SP2500 or SP3000 film scanner and LP1500, LP2000, LP2500, LP5500, LP5700 or LP5900 printer, there must be two separate FireWire cards in the Printer Server. One FireWire card connects to the film scanner, and the other one connects to the printer. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 109

•


If you are installing a FireWire scanner connected to the printer server7, perform the following: •

If there is a FireWire card in the Printer Server, write down which port the scanner FireWire cable is connected to, then disconnect the cable.

•

If there is no FireWire card installed in the Printer Server, refer to Installing One FireWire Card in the Printer Server. Refer to page 110.

•

Install FireWire drivers on the Printer Server. Refer to page 114.

•

If using an SP 3000 film scanner, refer to Setting Up Drivers for an SP 3000 Film Scanner. Refer to page 121.

•

If using an SP 1500, SP 2000 or SP 2500 film scanner. Refer to page 123.

•


If you are installing a FireWire printer connected to the printer server8, perform the following: •

If there is a FireWire card in the Printer Server, write down which port the scanner FireWire cable is connected to, then disconnect the cable.

•

If there is no FireWire card installed in the Printer Server, refer to Installing One FireWire Card in the Printer Server. Refer to page 110.

•

Install FireWire drivers on the Printer Server. Refer to page 114.

•

If using an LP5500, LP5700 or LP5900 printer, refer to page 116.

•

If using an LP1500, LP2000 or LP2500 printer, refer to page 119.

FireWire Card Installation Installing a Single FireWire Card in the MS01 Server or Printer Server Please make sure that you follow these procedures exactly.

>>> To install a FireWire card: 1

Remove any media from the computer’s drives (i.e., disks, CDs, and tapes).

2

Turn off all attached devices.

3

Turn off the computer.

4

Unplug all power cords from the electrical outlets.

7

If you are installing a Frontier Manager system with an ICIII Server, Printer Server (also known as LPC or FMPC) and SP1500, SP2000, SP2500 or SP3000 film scanner and ARE NOT USING an LP1500, LP2000, LP2500, LP5500, LP5700 or LP5900 printer, there must be a single FireWire card in the Printer Server. 8

If you are installing a Printer system with an LP1500, LP2000, LP2500, LP5500, LP5700 or LP5900, and either no film scanner will be installed or an SP500 film scanner will be connected to the ICIII, there must be a single FireWire card in the Printer server. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 110

5

Disconnect all cables attached to the computer.

6

Locate the service manual for the ICIII computer.

7

Follow the instructions in the service manual to open the computer’s case.

8

Locate a single open PCI slot in the computer.

9

Follow the instructions in the service manual to install the FireWire card in the open PCI slot.

10

Write down that the adapter is FireWire Card #1. It will be used for the Scanner (SP).

11

Follow the instructions in the service manual to close the computer’s case.

12

Proceed to “Installing the FireWire Drivers on the ICIII or Printer Server”.

Installing Two FireWire Cards in the Printer Server Please make sure that you follow these procedures exactly.

>>> To install two FireWire cards: 1

Remove any media from the computer’s drives (i.e., disks, CDs, and tapes).

2

Turn off all attached devices.

3

Turn off the computer.

4

Unplug all power cords from the electrical outlets.

5

Disconnect all cables attached to the computer, including power cords, input/output (I/O) cables, and any other connected cables.

6

Locate the service manual for the Printer server computer.

7

Follow the instructions in the service manual to open the computer’s case.

8

Locate two open PCI slots in the computer.


9

Determine whether the PCI slots are located on a riser card. See the following image for an example of PCI slots on a riser card.

If the PCI slots are on a riser card, refer to the following diagram to identify the FireWire cards. FireWire card #1 will be at the top of the riser card.


If the PCI slots are not on a riser card, they are directly on the computer’s motherboard. Refer to one of the following diagrams to identify the FireWire cards. FireWire card #1 will be closest to the CPU, memory and other motherboard components. FireWire card #2 will be closest to the bottom edge of the motherboard.

If there are more than two PCI slots, the above guidelines still apply.

Regardless of where the FireWire cards are installed, the cards will always be identified as cards #1 and #2. 10

Follow the instructions in the service manual to install FireWire cards in two open PCI slots.

11

Write down which adapter is FireWire Card #1. It will be used for the Scanner (SP).

12

Write down which adapter is FireWire Card #2. It will be used for the Printer (LP).

13

Follow the instructions in the service manual to close the computer’s case.

14

Proceed to “Installing the FireWire Drivers on the ICIII or Printer Server” below.


FireWire Driver Installation Installing the FireWire Drivers on the ICIII or Printer Server Important: Always install the FireWire drivers on the computer that has the FireWire cards installed. 1

After Windows launches, insert the MS Installation CD into the server’s CD-ROM drive.

2

Select Start > Run. The Run dialog box opens.

3

Click Browse. The Browse dialog box opens.

4

Navigate to the server’s CD drive (X represents the CD drive letter) and open directories to the following path: X:\ EZ171\FMPC XP Drivers\EZ171\

5

Select the setup.exe file, and click Open. The filename and path are populated in the Open field of the Run dialog box.

6

Click OK. The Run dialog box closes, and the Device Drivers Disk [D-01] dialog box opens.

7

Click OK. The Device Drivers Disk [D-02] dialog box opens.

8

Click OK.

9

Remove the CD from the CD-ROM drive. The system reboots. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 114

Setting Up FireWire Drivers for an LP 5500, LP 5700 or LP 5900 Printer Client Device 1

Ensure that the printer is turned off.

2

Connect the printer’s FireWire cable to the Printer Server’s FireWire Card #2.

3

Turn the printer switch to ON. Wait for the LCD screen to display Frontier…

4

Move the printer switch to STANDBY.

5

Wait until the LCD displays STAND BY. A Welcome to the Found New Hardware Wizard screen displays on the Printer Server.

6

Select Install the software automatically (Recommended).

7

Click Next. The Completing the Found New Hardware Wizard screen displays.

8

Click Finish. The wizard closes. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 115

Setting the LP 5500, LP 5700 or LP 5900 FireWire Interface IP Address 1

On the Printer Server, select Start > Settings > Network Connections. The Network Connections window opens.

2

Disconnect the printer’s FireWire cable from the back of the Printer Server. Note which port it is connected to.

3

Notice that one of the 1394 Connections has changed to status Network Cable Unplugged. (This is the printer’s FireWire connection.)

4

Right-click the 1394 Connection that is still listed as connected. (This is the scanner’s FireWire connection.)


A context menu opens. (The scanner does not use the networking capabilities of FireWire, and must be disabled to allow the scanner to connect.)

5

Select Disable. Note: Disabling the connection takes a few seconds. The screen may need to be manually refreshed to reflect the disabled connection.

6

Right-click the “unplugged” connection that is listed. A context menu opens.

7

Select Properties. The 1394 Connection Properties dialog box opens.


8

In the Internet Protocol (TCP/IP) Properties section, select Internet Protocol (TCP/IP).

9

Click the Properties button. The Internet Protocol (TCP/IP) Properties dialog box opens.

10

11

Select Use the following IP address and enter the following: IP address:

192.168.0.10

Subnet mask:

255.255.255.0

Click OK. The Internet Protocol (TCP/IP) Properties dialog box closes, and the 1394 Connection 2 Properties dialog box returns to focus.


12

Click Close. The Properties dialog box closes.

13

Re-connect the printer’s FireWire cable to the port it was unplugged from.

14

Click

to close the window.

Setting Up Firewire Drivers for an LP 1500, LP 2000 or LP 2500 Printer Client Device 1

Alert: Before proceeding, read this procedure and be prepared to quickly follow Step 3.

2

Ensure that the printer is turned off.

3

Connect the printer’s FireWire cable to the Printer Server’s FireWire Card #2.

4

For the LP 1500 and LP 2000: •

Turn the printer switch to ON.

•

Turn the printer switch to STANDBY.

•

Wait until the printer’s LCD screen reads STAND BY or WARMING UP.

•

Proceed to Step 5.

For the LP 2500: •

Turn the printer switch to ON.

•

Wait for the Frontier Starting countdown to begin.

•

On the LCD screen on the printer, quickly press: Menu

Enter •

The printer’s ROM version now appears on the LCD screen.

•

Turn the printer switch to STANDBY.

•

Proceed to Step 5.


The Welcome to the Found New Hardware Wizard screen appears on the Printer Server.

5


6

Click Next. The drivers install and the Completing the Found New Hardware Wizard screen displays.

7

Click Finish.


Setting Up FireWire Drivers for an SP 3000 Film Scanner Make sure that you follow these procedures exactly. 1

Ensure that the SP 3000 film scanner is turned off.

2

Complete the scanner installation process.

3

Important: This procedure must be completed before running the vdentry application. Examine the computer and determine if there is a built-in FireWire interface. If there is a built-in FireWire interface, one or more FireWire ports will appear on the exterior of the computer’s case. •

The ports may be labeled 1394, IEEE 1394, iLink or FireWire.

•

The ports may be labeled with the FireWire symbol:

See the images below for examples of built-in FireWire ports.

4

If there is not a built-in FireWire interface, the newly added film scanner FireWire board has a BusID of 0. If there is a built-in FireWire interface, the newly added film scanner FireWire board has a BusID of 1.

Next, run the vdentry application to install virtual device drivers . . . 5

From Windows, select Start > Run.


The Run dialog box opens.

6

Type VDEntry in the Open field.

7

Click OK. The VirtualDriverEntry dialog box opens.

8

Set the IEEE1394 BusID to 0.

9

Click Regist. Note: If no error messages appear, the vdentry registration was successful. The Welcome to the Found New Hardware Wizard screen displays.

10


11

Click Next.


The Completing the Found New Hardware Wizard screen displays.

12

Click Finish. The wizard closes.

13

Continue installation on the next page with the Disabling FireWire Networking for the SP 1500/2000/2500/3000 Scanners section.

Setting Up FireWire Drivers for an SP 1500, SP 2000 or SP 2500 Film Scanner Make sure that you follow these procedures exactly. 1

Ensure that the SP1500, SP2000 or SP2500 film scanner is turned off.

2

Complete the scanner installation process.

3

Turn on the SP1500, SP2000 or SP2500 film scanner and wait for it to boot.

4

Switch to the computer where the scanner’s FireWire cable is connected (Printer Server or ICIII Server). The Welcome to the Found New Hardware Wizard screen displays.

5


6

Click Next.


The Completing the Found New Hardware Wizard screen displays.

7


8

Continue installation on the next page with the Disabling FireWire Networking for the SP 1500/2000/2500/3000 Scanners below.

Disabling FireWire Networking for the SP 1500/2000/2500/3000 Scanners Note: Only perform these steps on systems without LP 5500/5700/5900 printers; follow the steps on page 116 for these systems. 1

On the Printer Server, select Start > Settings > Network Connections. The Network Connections window opens.

2

Right-click the first 1394 Connection that is listed.


A context menu opens.

3

Select Disable. Note: Disabling the connection takes a few seconds. The screen may need to be manually refreshed to reflect the disabled connection.

4

Repeat steps 2 and 3 above for each 1394 connection in your system.


Adjusting the System’s Date and Time Properties Verify the date and time on each PC in your system before software installation. 1

In the Windows taskbar’s system tray, double-click the clock icon in the bottom right corner. The Date and Time Properties dialog box opens.

2

Click the Time Zone tab if the displayed time zone is incorrect.

3

Adjust, as necessary.

4

Click Apply to retain changes.

5

Click the Date & Time tab to adjust today’s date on the calendar if the date displayed is incorrect.

6

Use the Time interface to adjust the time.


7

Click Apply to retain changes.

8

Click OK. Date and time settings are updated, and the dialog box closes.

Ensuring Adequate SPC/MCU Disk Space This task is only required for the certain scanner hardware models, including: SP 1500, 2000, or 2500. After an SP 1500, 2000, or 2500 system’s SPC/MCU is ghosted, perform the following tasks to prevent lack-of-space issues.

>>> First, move some directories on the SPC/MCU 1

Open a Windows Explorer window, and browse to the C:\ drive.

2

Select both the I386 directory and the Drvlib directory, and right-click. A context menu opens.

3

Select Cut. The directories and their contents are placed on the Windows clipboard.

4

Browse to the D:\ drive.

5

Right-click anywhere in the window. A context menu opens.

6

Select Paste. The directories are pasted into the D:\ drive.

7

Close all Windows.

>>> Second, reconfigure the pagefile size on the SPC/MCU 8

On the desktop of SPC/MCU, right-click the My Computer icon. A context menu opens.

9

Select Properties.


A System Properties dialog box opens.

10

Select the Performance tab. The Performance tab displays.

11

Click the Change button.


A Virtual Memory dialog box opens.

12

Ensure that the C: drive is selected in the Drive (Volume Label) list box.

13

Make the following changes: In the Initial Size (MB) field, change the value to 383 In the Maximum Size (MB) field, change the value to 383

14

Click the Set button. The new settings for the C: drive are saved, and the Drive (Volume Label) list box is updated.

15

Now, select the D: drive in the Drive (Volume Label) list box.

16

Make the following changes: In the Initial Size (MB) field, change the value to 700 In the Maximum Size (MB) field, change the value to 700

17

Click the Set button.


The new settings for the D: drive are saved, and the Drive (Volume Label) list box is updated.

18

Click OK. The Virtual Memory dialog box closes, and focus returns to the System Properties dialog box.

19

Click OK. The System Properties dialog box closes.

20

Reboot the SPC/MCU. The SPC/MCU system is now ready to install the scanner (also called A1) and MS01 software.


Installing & Configuring the ASK 2000, 4000, & 4000A Printers Once the MS01 software has been installed, the next step is to install the ASK printers. This is a two-step process: 1. Install the ASK printers and run the Windows-standard Found New Hardware wizard. 2. Configure the printers to properly coordinate with the USB ports that the printers are plugged into on the ICIII CPU. Based on your system’s configuration, the printers must be installed in the particular order defined in the table below. Install First

Install Second

Install Third

Install Fourth

Configurations

Printer

Size

USB#

Printer

Size

USB#

Printer

Size

USB#

2-4x6 _1-8x10

ASK2000

4x6

2

ASK2000

4x6

1

ASK4000

8x10

0

2-4x6_1-5x7

ASK2000

4x6

2

ASK2000

4x6

1

ASK2000

5x7

0

2-6x9 _1-8x10

ASK2000

6x9

2

ASK2000

6x9

1

ASK4000

8x10

0

1-4x6_1-6x9_1-8x10

ASK2000

6x9

2

ASK2000

4x6

1

ASK4000

8x10

0

1-4x6_1-5x7_1-8x10

ASK2000

5x7

2

ASK2000

4x6

1

ASK4000

8x10

0

2-3.5x5_1-A4*

ASK2000

3.5x5

2

ASK2000

3.5x5

1

ASK4000A

A4

0

1-3.5x5_ 1-5x7_1-A4 A4*

ASK2000

3.5x5

1

ASK2000

5x7

2

ASK4000A

A4

0

2-4x6_1-5x7_1-8x12

ASK2000

5x7

3

ASK2000

4x6

2

ASK2000

4x6

2-4x6_1-6x9_1-8x12

ASK2000

6x9

3

ASK2000

4x6

2

ASK2000

4x6

* Non-US configurations only


Printer

Size

USB#

1

ASK4000

8x12

0

1

ASK4000

8x12

0

ASK Hardware Installation & Configuration 1

Ensure that all of the printers are turned off.

2

Plug each printer’s USB cable into the ICIII.

3

Referring to the configuration chart at the beginning of this chapter, turn on the first printer in your configuration. A Found New Hardware Wizard opens.

4

Select the Install from a list or specific location (Advanced) radio button.

5

Click Next.


The Please choose your search and installation options screen displays.

6

Select the Search for the best driver in these locations radio button.

7

Select the Include this location in the search check box.

8

In the associated field, type C:\DRIVERS\Copal\Drivers.

9

Click Next. Hardware installation progress displays.


A Hardware Installation dialog box displays.

10

Click Continue Anyway. The Completing the Found New Hardware Wizard screen displays.

11


12

From Windows, select Start > Run. The Windows-standard Run dialog box opens.

13

In the Open field, type C:\FES\ASKTool.exe

14

Click OK.


After a few moments, the ASK Tool application window opens.

15

In the list box, select the ASK-2000 item that you just added. It will have a USB No. of 0.

16

Click the Set USB No. button. The Set New USB No. dialog box opens.

17

In the Please set new USB field, enter the number that corresponds to the printer in the USB # configuration chart at the beginning of this chapter.

18

Click OK. The Set New USB No. dialog box closes, and focus returns to the ASK Tool application window. The USB No. displayed in the ASK Tool application window for the selected printer updates.


19

Click Exit. The ASK Tool application window closes.

20

Repeat the above new hardware installation and USB number configuration procedures for each remaining ASK printer based on the order listed in the table at the beginning of this chapter.

21

After all ASK printers in your system have been installed and configured, select Start > Shut Down. The Shut Down Windows dialog box opens.

22

From the drop-down menu, select Restart.

23

Click OK. The system restarts and is ready to use.


To Back Up (Save) Settings You can save system configuration settings via MS01’s Backup and Restore tool. The data is saved to the specified output directory and an XML file. This file is used to restore the data. Use this backup procedure to move this data to another system or to restore a system. WARNING: You must perform a new backup anytime the system’s configuration settings have been changed. 1

In the MS01 Maintenance application, navigate to 02 System Settings > 0215 Backup and Restore.

The Data Backup and Restore dialog box opens.

2

Configure the backup information as desired using the options displayed on the Backup tab.


3

Click Save. A Copying dialog box opens displaying backup progress.

After copying completes, a Data Backup and Restore dialog box opens confirming that the backup is complete.

4

Click OK. The dialog box closes, and focus returns to the main Data Backup and Restore dialog box.

5

Click Close. The Data Backup and Restore dialog box closes.


Appendix B: Information about MS01 Power for the MS01 System Non-Connected Systems9 If the lab does not have a connected system, power off all devices nightly using the established shut down procedures as defined in the MS01 3.0 Start-up and Shut down Guide. Important: Do not shut down the ICIII without first post-op’ing printers and scanners configured with the system. Proper shut down requires post-op of these devices prior to clicking the exclamation mark button on the MS01 interface.

Connected Systems Not all hardware components in a Fujifilm retail lab system should be shut-down nightly. Use the following guidelines to ensure that your lab system’s components run properly. 10

Never Power Off

Power Off Nightly

ICIII CPU (formerly known as the PIC)

Fujifilm Inkjet printer(s)

Kiosks

RIP CPU associated with the inkjet printers

Xerox Phaser Printer

Epson Wide Format Printer

Rimage CD Writer/Printers

Fujifilm Film Scanner


Fujifilm Frontier Printer

Frontier Manager Printer Controller (FMPC/LPC)

9

Non-connected systems have no Internet connectivity and no communication to outside networks. A connected MS01 system is a system that receives data from Fujifilm’s fullfilment network, sends data to Fujifilm’s fullfilment network, and receives orders from various sources (such as retailers’ photo Web sites). This is all accomplished via Internet connectivity. 10 These devices should only be powered off for necessary maintenance. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 139

Support Mode Throughout this guide, you will find that many procedures require you to be in Support mode. Support mode enables you to access additional features of the operating system that Operator mode does not allow you to access. Getting into Support mode is a four-step process. Rather than repeating these four steps (with the accompanying descriptive screen captures) in every location where Support mode is required, we show those steps here and refer to this area when Support mode is mentioned in the rest of the guide.

To enter Support mode: 1

From the MS01 3.0 FUJI -- View Orders screen, click Tools in the top right corner.

The MS01 Setup dialog box opens.

2

Click LOG OFF. The Fujifilm Log-Off dialog box opens.

3

Enter the password 5u990rtm0d3.

4

Click OK.


The system automatically logs off and logs back on. This takes a minute or two. Some Windows screens appear and self-dismiss during the process. The MS01 3.0 FUJI – View Orders screen returns to focus and the system is now in Support mode.


Operator Mode Throughout this guide, you will find that many procedures require you to be in Operator mode. Getting into Operator mode is a four-step process. Rather than repeating these four steps (with the accompanying descriptive screen captures) in every location where Operator mode is required, we show those steps here and refer to this area when Operator mode is mentioned in the rest of the guide.

To enter Operator mode: 1

From MS01 3.0 -- View Orders, click Tools.

The MS01 dialog box opens.

2

Click LOG OFF. The FUJIFILM Log-off dialog box opens.

3

Type the password: operator.

4

Click OK. The system automatically logs off and logs back on. This may take a couple minutes. Some Windows screens display and self-dismiss during the process.


From MS01 3.0 FUJI -- View Orders screen returns to focus and the system is now in Operator mode.


Accessing Maintenance11 Many of the procedural instructions in this guide require the operator to launch the Maintenance application. Note: SPCs do not display a Switcher. You will have to press to access Maintenance on these computers.

To launch Maintenance: 1

Ensure that the View Orders or View Images screen is displayed.

2

If necessary, click the Switcher button.

The Switcher application expands. 3

Click the Maintenance button.

The Maintenance application window opens.

11

Note: Not all labs have access to the Maintenance application. For instance, if a lab is set-up in a “locked-down” mode, Maintenance will not be accessible unless the system is in Support mode. MS01 Installation Guide © 2006-2009 FUJIFILM Corporation. All rights reserved. 144


FUJIFILM Corporation 7-3, Akasaka 9-chome, Minato-ku, Tokyo 107-0052, Japan

Installation Guide Mso1 v3

Recommend Documents