How to pass the assessment of Computer Systems Servicing NC II? To pass this assessment you need the following: For Assemble PC: 1. Make sure you are knowledgeable about static electricity or ESD, why do I say that? Because I see some candidates or students taking this for granted and the result? The computer have been damaged and can't even boot in BIOS settings. 2. Make sure you are familiar in the connection of Front Panel Led's in the motherboard because not all mobo have the same standard in connecting this wire(s). And take note some Assessor are very strict on this part, though your PC is working they will not accept incorrect connection. 3. Be 90% calm and 10% nervous. Being nervous is really part of taking the assessment. :P , if you're not then good for you :)
For OS Installation: 1. This is the easiest part, just make sure you install the operating system in its right location I mean Drive C: (exception is for the dual OS). If you failed on this one it will consume your time, always remember that the assessment has a time duration. 2. Install the appropriate drivers ONLY, Do not install other software included in the CD/DVD installer (Ex. Adobe Acrobat etc.) it will just consume your time.
For Networking: 1. Use a good crimping tool and punch down tool 2. Create network cables slowly but surely (but make sure it will not take too long, we have time duration remember?) 3. Make sure you memorize the wiring arrangement of creating straight-thru and crossover cables 4. You must be knowledgeable in configuring wireless router
For Server Setup: 1. You should know how to configure the following:
DHCP
DNS
QOS
MAC Filtering
File/Printer Server
Remote Desktop
For Maintenance:
1.
You should know how to:
Create and Use System Image
Install and Use anti-virus, registry cleaner, disk defragmentation
Create and Use System Restore
For Oral Questioning: 1. This will be based in all the tasks that you will undergo in the assessment and some theoretical knowledge when you are in college or training :) If you are looking for the CSS NC II Reviewer, click
What are the requirements in Computer Systems Servicing NC II? These are the requirements (Tools, Materials, Equipment) for CSS NC II: For Assemble PC:
Screw Drivers (Standard, Philip)
Pliers (Mechanical, Longnose) - optional
Anti-static Wrist Strap - optional
Anti-static Mat - optional
For OS Installation:
Windows Server 2008 Installer
Windows 7 Installer
Device Drivers
For Networking:
Impact Punch Down Tool
Crimping Tool
RJ-45
Modular RJ-45 I/O
Patch Panel
Network Switch
Router with WI-FI
For Server Setup:
Windows Server 2008 PC
Windows 7 PC
Laptop (Windows 7 or Windows 8)
For Maintenance:
Blank DVD-R (for System Image)
Anti-virus Installer (Ex. Avast, Avg etc.)
Registry Cleaner (Ex. CCleaner)
Disk Defragmenter (Ex. Defragler)
System Restore (Restorepoint)
Tip: Bring your own Crimping Tool, hate to say this but some assessment center tools like this one is dull. :P
What is New in Computer Systems Servicing NC II? Hi to all, its been a while since I open this blog / website but this is the only time that I've post again :) Okay, lets talk about What's New in this modified qualification of Technical Education for Skills Development Authority (TESDA) for Computer Hardware Servicing NC II that becomes Computer Systems Servicing NC II. Lets compare the tasks that both qualification have: In Computer Hardware Servicing NC II (CHS NC II), these are the tasks that you have to undergo: Task 1: Write or Enumerate at least six Occupational Health Safety Policies and Procedures (OHS). Task 2: Inventory all the Tools, Equipment, Materials and Work Area used or under CHS NC II. Task 3: Assemble a Desktop Computer and configure the system Task 4: Install Operating System and Device Drivers Task 5: Computer Networking Creating Network Cables (Crossover, Straight-thru cable)
Network Configuration
File and Printer Sharing
Restore / Backup
Task 6: Oral Questioning
And for Computer Systems Servicing NC II, these are the new tasks: Task 1: Assemble Desktop Computer Task 2: Install Operating System and Appropriate Device Drivers Windows 7 or Windows 8 Windows Server 2008 R2 or latest Server OS Task 3: Setup Computer Networks Creating Network Cables
Configuring Router (Wireless, MAC, QOS, Port Forwarding)
Network Configuration Task 4: Setup Computer Servers DHCP Server
DNS Server
File Services
Remote Desktop Task 5: Maintain Computer System Creating System Restore Point
Creating System Backup Image
Using the created Restore Point to restore the system
Using the created Backup Image
Disk Defragmentation
Disk Cleanup
Scanning for viruses (anti-virus)
Task 6: Oral Questioning
