aljabar linear tramsformasi linearFull description
Regresi Linear dan Non Linear
rpp
Linear & Non Linear Text
Linear & Non Linear Text
Full description
Linear regressionFull description
sadsadsadDescrição completa
Untuk Download Copy Paste alamat ini di addressbarFull description
math 15 linear combination lectureFull description
Prentice Hall's Linear Estimation book, by Thomas Kailath, Ali Sayed and Babak Hassibi
Untuk Download Copy Paste alamat ini di addressbarDeskripsi lengkap
Descrição completa
PBSFull description
Deskripsi lengkap
Silahkan Liat langsung
Materi Program LinearDeskripsi lengkap
Descrição: Álgebra Linear - UFC
sadsadsad
GE Inspection Technologies
Ultrasonics
Linear Phased Array Probes for Angle Beam Inspection with Replaceable Wedges
What is a Phased Array Probe? A phased array probe can be compared to a large single element transducer whose active area has been subdivided into small segments or elements. When connected to appropriate instrumentation, the beam from the phased
array is steered and focused electronically by sequentially firing the elements of the array. Angle and focal depth are generated electronically electronically by the instrumentatio instrumentation n and can be changed on each pulse repetition.
• Beam indexing (scanning) for large area coverage • Low noise wedge wedge design • Standard Hypertronics connector
Advantages of Angle Beam Phased Array Probes • Eliminate multiple inspections with fixed angle probes.
• Reduce mechanical and manual manual manipulation.
• Increase sensitivity and signal to noise ratio ratio with electronic focusing.
• Probes may also be used for immersion and and water column testing.
• Inspect hard to access areas areas from a single contact point.
• Replaceable wedges wedges enable a broad range of applications for each probe.
• High sensitivity, broadband broadband piezocomposite elements elements
Digital | Eddy Current | Film | Testing Machines | Ultrasonics | X-ray
• Replaceable wedges maximize service life of the array probe.
Typical Applications • Weld inspection, manual or automated • Immersion testing with variable focus and beam angle • Flaw detection and sizing in tubular goods, castings, forgings, axles, shafts, et al • Pressure vessels and piping • Turbine blades, rotor discs, et al
Major Industry Segments Served
Power Generation
Oil and Gas
Transportation
Aerospace
Standard Probe Configurations (custom designs also available) Product Code
115-000-235 115-000-234 115-000-189 115-000-190
Frequency (MHz)
Element Count
Pitch (mm)
Aperture (Active Area)
Dimensions (mm) A B
C
D
1.5 2.25 5.0 7.5
32 32 32 32
1 1 1 0,5
32 x 10 mm 32 x 10 mm 32 x 10 mm 16 x 10 mm
16.5 16.5 16.5 16.5
25.4 25.4 25.4 25.4
38.1 38.1 38.1 22.9
45.6 45.6 45.6 31.8
Delay Lines and Wedges – Product Codes Probe Product Code