FULSCOPE 440R Series, Pneumatic Indicating Controller Specification Sheet 1-1A-IND Issue 1, January 1999
DESCRIPTION The 440R Series Pneumatic Indicating Controller is single duty universal instrument that can be used to control pressure, volumetric pressure, temperature and liquid level. The available measuring elements are listed as Actuation under HOW TO ORDER. In addition to the three control responses, the proportional form of the 440R Series Controller can be used for differential gap of 1 to 100%. Field modification of control responses is accomplished by the easy installation of the desired components into the preconditioned, universal case. Internal mounting of an automatic-to-manual unit is a simple field installation requiring no case modifications or changes in panel cutout. The modular construction not only provides easy field modification but vastly simplifies maintenance procedures.. For Batch operation SIS168A and SIS 168B is available for reset limiting or reset loading. The reset Bellows is piped to an external port for the customer’s piping of a limiting device, that is, a three-way solenoid valve, or high or low pressure selector. The controller can be either surface mounted, panel mounted or equipped with an optional vertical pipe mounting bracket.
FEATURES Available with Gage Pressure and Temperature.
BENEFITS Adaptable to a wide variety of process configurations.
Exceptional readability and resolution. Large Scale 6-3/8 in. long 1/2 in. high numerals, fluorescent, orange pointers that do not obscure scale. Case and door is cast aluminium with corrosion resistant textured black baked enamel.
Durable, rugged stands up in tough environments.
Prisma Automation - ABB
PERFORMANCE SPECIFICATIONS
On-Off
125% output per % input (125 psi output per psi input)
Proportional
0.2 to 35% otuput per % input (0.2 to 35 psi output per psi input)
Reset
0.05 to 200 repeats per minute.
PRE-ACT
0.1 to 20 minutes.
Differntial Gaps
1 to 100%
Calibrated Accuracy
Process Indicating Pointer ± 2% across range for most primaries.
Repeatability
Better than 0.3%.
Ambient Temperature Limits
-20 0 F (-290C) minimum, 1800F (820 C) maximum
Output Gauge
0-30 psi/0 - 2.0 Kg/cm2 dual range standard.
Scale Length
6 3/8 in. long
Air supply
Nominal: 20 psi; minimum 18psi; maximum 30 psi
Warning: Use of a supply gas other than air can create a hazardous environment because a small amount of gas continuously vent to atmosphere. Air Connections
Bottom connected, 1/4 in NPT
Air Consumption
0.2 scfm maximum
Output
3 to 15 psi/0.2 to 1.0 Kg/cm2
PHYSICAL SPECIFICATIONS Case and Door
Cast aluminium with corrosion resistant textured black baked enamel.
Window
Glass
Mounting Standard Optional
Surface or flush (panel) Vertical pipe mounting bracket
Dimensions
11.7/8 in. high x 10 in. wide x 4.3/4 in. deep (300 mm high x 255 mm wide x 120 mm deep).
Scale length
6.3/8 in. long (160 mm)
Connecting (Actuating Systems) Bottom only Weight
13 lb (5.9 kg)
Housing
Weather proof
Note: The following primaries will produce dead band and repeatability within twice the stated value. Type 42 Low Pressure Capsule units below 30 in H2O span Type 36 Low Pressure Bellows units below 3 psi span.
ORDERING INFORMATION 1.
Select one code from each category and substitute in the sequence of the sampling catalog number.
2.
For Actuation ordering information refer to the appropriate Specification Sheet in File 4, details of which will be found under ACTUATION in the following schedule.
3.
Refer to File 9-3, and select appropriated scale.
4.
Specify Direct or Reverse Action
BASE INSTRUMENT 440R _ _ _ _ _ 441R _ _ _ _ _ 442R _ _ _ _ _ 443R _ _ _ _ _ 444R _ _ _ _ _
Fixed Duty, on-off Signle Duty, proportional Signle Duty, proportional with automatic reset Signle Duty, proportional with Pre-Act Signle Duty, proportional with auto reset and Pre-Act
ACTUATION-Specifed by the 2nd letter F G M N
Gage Pressure Actuation Gas Thermal Mercury Thermal Actuation Volumetric Pressure Actuation
Refer to File 4-2 and 4-2A Refer to File 4-1 Refer to File 4-1 Refer to File 4-3, 4-3B
MOVEMENT-Specifed by the list digit following letters 1 Internal Set Point Adjustment 5 External Set Point Adjustment 6 Pneumatic Set(Not available in 433R and 444R)
SERVICE-Specifed by the 2nd digit following letters 1 2
Without automatic to manual unit With internal automatic to manual unit (Not available on 440R on-off form)
SENSING ELEMENT-Specifed by the 3rd and 4th digits following letters For information about sensing elements refer to the corresponding file number as listed for the actuation elements.
441R
M
1
2
17
SAMPLE CATALOG NUMBER (With standard type or plain bulb and 5 ft. capillary)
ACCESSORIES-Add the appropriate accessory number in parenthesis following complete catalog number _ _ _ _ _ _(82) Vertical Pipe Mounting Bracket _ _ _ _ _ _(103)-(104) _ _ _ Air sets
ACCESSORIES AND OPTIONAL FEATURES Scales-Refer to File 9.3 for listing and extra cost for non-standard scales Air Sets piped and mounted - Refer to File 7-1B for pricing. (103) and (104) SIS 168A - Reset Li miting circuitry See 1B-1A405 SIS 168B - Reset Loading circuitry See 1B-1A406
The Company’s policy is one of continuous product improvement and the right is reserved to modify the information contained herein without notice. © ABB 1998
Prisma Automation ZI Les Paluds – Rue de Lenche, Lot n° 4 13400 Aubagne - FRANCE Tél. : +33 (0) 4 42 72 17 40 Fax : +33 (0) 4 42 72 17 41 http://www.prismaautomation.com
(5.98)
