Festo 10 Tips Servos Steppers

10 tips for servos and steppers… a simple guide

What are the basic application differences between servos and steppers? Where would you choose one over the other? This short 10 point guide, offers a simple non technical explanation explanation of the difference differencess between these positioning technologies and attempts to de-mystify the subject, putting straight many misconceptions. By Nigel Dawson Edrives Product Manager [email protected]

Trusted by over 1 million members

Try Scribd FREE for 30 days to access over 125 million titles without ads or interruptions! Start Free Trial Cancel Anytime.





1. Torque comparison comparison of steppers and servos Many people believe stepper motors do not have the torque capacity of of servo motors. motors. This is not necessarily necessarily true. true. The nominal torque of a stepper motor is very similar to a servo for a comparable frame size. Of course a servo has an additional time dependantt peak toque rating and dependan their speed curve is considerably more flexible and higher performance than a stepper. If a stepper solution is correctly sized, it offers a real low cost alternative to a servo.

2. Good applications for steppers Servo motors, despite many claims, are not always the best performance choice for applications.. The structure applications structure of a stepper motor means that positions are discrete steps in its revolution revolut ion cycle. If an application requires requir es very good stand still stability, for instance positioning a vision system, a stepper will always be better than a servo. Servo motors resonat resonate e backwards and forwards at standstill, standsti ll, giving them their positioning characteris characteristics; tics; stepper motors stay very stable at standstill.

Positioning of vision systems is an ideal application for stepper motors





3. When is a servo servo not a servo? The term servo, often refers to a system with closed loop feedback, hence a servo motor is really only a servo when coupled to the drive to close the loop. This also means that any motor type can be built into a servo system to offer a cost optimised servo system. Such low cost servos utilise stepper motors to give all the functionality of a servo at 50% of the cost with speed being the only drawback.

An example of a servo drive, designed specifically for encoder enabled

4. What to watch watch on a stepper stepper application Certain characteristics characteristics of a stepper motor necessitat necessitate e careful selection on applications applications.. The torque curve of a stepper is very short with high RPMs leading to a drop off in torque quite quickly. quickly. Ve Very ry low speeds on steppers also offer low torque; therefore therefor e vertical applications where the motor holds a load stationaryy are often not suitable stationar for steppers. Applications that require very smooth steady speed are also difficult with steppers due to the resonance created by the discrete steps; this however can often be improved improv ed by micro stepping or closing the loop.





5. What is micro micro stepping? stepping? How can a motor with only 200 steps offer 200,000 positions in one revolution revolution?? The stepping stepping driver that gives the motor the correct power and phases for it’s task is the product that contains the micro stepping function. By varying the current between 2 poles in the motor we can affect the rotor position between the two poles. If the driver gives 50% of the current to each pole, the rotor will be exactly half way between the poles, therefore offering half steps. Many drivers can offer 1/1000 steps, therefore increasing increas ing the resolution considerably. Be careful, micro stepping has a negative effect on the torque curve for stepper motors, reducing the torque by as much as 30%.

6. “Torque the torque” One major advantage of servo motors is their ability to control their torque in the application. Steppers motors operate constantly at full torque, therefore therefor e making it impossible to utilise them in applications where force or torque control is required. If a servo motor is connected to a ballscrew drive, the application can offer precise force control for pushing a product or press fitting products together in assembly. However, closed loop stepper systems do have the ability to offer torque control.





7. Size IS everything Servo motors and stepper motors are sized in EXACTLY the same way. Care must be taken to ensure that the torque requirements require ments for the stepper motor during acceleration (the most power hungry phase of the movement) moveme nt) lies within the nominal torque curve of motor motor..

Servo Motors have more flexibility as the accelerat acceleration ion torque generally generally can lie in the peak torque curve of the servo motor and only the Root Mean Square torque of the overa overall ll cycle needs to lie within the nominal torque curve.

Stepper motor torque curves showing single profile for three alternative voltages for the same motor

Servo motor torque curves showing the peak and nominal (sustainable) torques





8. Sizes for all applications Remember, the majority of stepper and servo motor manufacturers manufactur ers offer the same frame size motor in differing lengths. This feature feature allows allows differentt torques and inertia differen values to be obtained by the same size motor, allowing a greaterr degree of freedom in greate selection. It also allows greater performance without increasin increasing g the motor size and therefore the cost significantly, resulting is a solution that is more cost effective,, lighter and with smaller effective installation installa tion space. By keeping the frame size smaller and increasing increas ing the length, any costs of additional gearboxes are reduced significantly too.

9. Don’t use a sledgehammer to crack a nut. Many servo motors are attached to mechanical actuators such as belt drives to convert the rotary motion to linear motion. Often stepper motors are ignored for this application on the presumption presumpt ion that they are too slow. However, belt drives generally have long travel distances per revolution, with many medium sized belt drives moving 100mm per rev.

Servo motors on belt drives are often oversized on speed

For a relatively fast movement of 2 metres/sec., the motor would have to rotate at only 1200 rpm, well within the scope of a good quality stepper motor. A servo motor with 12000 rpm performance,, would offer a top performance speed of 20 metres/s metres/second, econd, far faster than any belt drive can travel. trave l. Don’t over specify the application when you do not







10. Power equals performance On both stepper systems and servo systems, the more current c urrent you have, the more torque is generated by the motor. If a 100mm frame size servo motor is the only size that will fit the application space, then using a 3 phase 400V AC drive will offer significantly significan tly more torque than a 240V AC variant. Similarly with a stepper drive you have the choice of varying the DC voltage to the drive, many systems work on 24V DC, 48V DC or 72V DC, obviously a 72V power supply will offer an increase in performance on 24V.

One advantage of a stepper drive is the amount of torque that can be generated from a simple 48V DC power supply, meaning the drive is running at a safe supply voltage,, adding the benefit of voltage safe and easy maintenance.

Examples of 24V and 48V DC power supplies for use with stepper drives





Festo 10 Tips Servos Steppers

Recommend Documents