EGANT CELLULAR COMPONENTS
Power Split Split ters, Broadband 376 - 2200 MHz TETRA, NMT NMT,, GSM900, GSM1800, UMTS
Floor 2 Floor 1
RBS
TETRA, 376 - 2200 MHz
Splits sign als in 2, 3 or 4 ways The power splitter is designed to equally split one input signal into 2, 3 or 4 outputs. When building an indoor coverage system the splitter is often used to split signals between floors and antennas. The functionality of handling both transmitting and receiving signals in the same path is highly bene ficial since the TX signal is split and the RX signal is com bined in the same stage and component.
The 2-way, 3-way and 4-way power splitters are individually designed to be used with TETRA, NMT, GSM900, GSM1800 and UMTS.
Design De sign highli ghts: · · · ·
Low insertion loss Low intermodulation Easy installation No active components (robust design)
Technical Speci fi cations f or Power Splitt ers Below are some typical data. For more detailed information, please contact us.
Electrical Speci fi cations Product number: Passband: Input return loss: 376 - 2200 MHz
EG 500 8032 2-Way Splitter 376 - 2200 MHz > 18 dB, typ 24 dB
EG 500 8033 3-Way Splitter 376 - 2200 MHz > 18 dB, typ 24 dB
EG 500 8034 4-Way Splitter 376 - 2200 MHz > 18 dB, typ 24 dB
Split loss: Dissipative loss: 376 - 2200 MHz Max input power/port:
< 3.0 dB
< 4.7 dB
< 6.0 dB
< 0.05 dB 700 W avg. 3 kW peak
< 0.05 dB 700 W avg. 3 kW peak
< 0.05 dB 700 W avg. 3 kW peak
< - 117 dBm,160 dBc 50 Ohm
< - 117 dBm,160 dBc 50 Ohm
< - 117 dBm,160 dBc 50 Ohm
253 x 38 x 80 mm 7/16 (f) 1.12 kg
271 x 38 x 80 mm 7/16 (f) 1.20 kg
271 x 80 x 80 mm 7/16 (f) 1.20 kg
-35 to +70ºC Relative 5 - 100% IP68 EG 300 0306 Bracket, stainless steel
-35 to +70ºC Relative 5 - 100% IP68 EG 300 0306 Bracket, stainless steel
-35 to +70ºC Relative 5 - 100% IP68 EG 300 0306 Bracket, stainless steel
EG 500 8042 2-Way Splitter 376 - 2200 MHz > 18 dB, typ 24 dB < 3.0 dB < 0.05 dB 700 W avg. 3 kW peak
EG 500 8043 3-Way Splitter 376 - 2200 MHz > 18 dB, typ 24 dB < 4.7 dB < 0.05 dB 700 W avg. 3 kW peak
EG 500 8044 4-Way Splitter 376 - 2200 MHz > 18 dB, typ 24 dB < 6.0 dB < 0.05 dB 700 W avg. 3 kW peak
< - 117 dBm, 160 dBc 50 Ohm
< - 117 dBm,160 dBc 50 Ohm
< - 117 dBm,160 dBc 50 Ohm
276 x 26 x 45 mm N (f) 0.45 kg
276 x 26 x 64 mm N (f) 0.50 kg
276 x 26 x 64 mm N (f) 0.55 kg
-35 to +70ºC Relative 5 - 100% IP65 EG 699 0005 Bracket, aluminum
-35 to +70ºC Relative 5 - 100% IP65 EG 699 0005 Bracket, aluminum
-35 to +70ºC Relative 5 - 100% IP65 EG 699 0005 Bracket, aluminum
3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
Mechanic al Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing: Installation support:
Electrical Speci fi cations Product number: Passband: Input return loss: Split loss: Dissipative loss: Max input power/port: 3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
Mechanic al Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing: Installation support:
Egant reserves the right to change this product speci fication at any time without notice.
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail:
[email protected] www.egant.se RevC
EGANT CELLULAR COMPONENTS
Power Split ters, Broadband 376 - 2700 MHz TETRA, NMT, GSM900, GSM1800, UMTS and LTE
Floor 2 Floor 1
RBS
Superi or b andwi dth, 376 - 2700 MHz
Splits sign als in 2, 3 or 4 ways The power splitter is designed to equally split one input signal into 2, 3 or 4 outputs. When building an indoor coverage system the splitter is often used to split signals between floors and antennas. The functionality of handling both transmitting and receiving signals in the same path is highly bene ficial since the TX signal is split and the RX signal is com bined in the same stage and component.
Installation bracket Use flexible stainless steel mounting bracket EG 300 0306 for Power Splitter with DIN connectors or the EG 699 0005 bracket for N version.
All Egant power splitters are individually designed to be as future proof as possible. They are extremely broad banded to accomodate for tomorrow’s cellular systems, thus minimizing the need to replace older components when adding new services into a system.
Design Highlights: · · · ·
Low insertion loss Low intermodulation Easy installation No active components (robust design)
Technical Specifi cations f or Power Splitt ers Below are some typical data. For more detailed information, please contact us.
Electrical Speci fi cations
2-Way Power Splitter EG 605 0019 376 - 2700 MHz
2-Way Power Splitter EG 605 0020 376 - 2700 MHz
> 13,8 dB > 17 dB > 18 dB, typ 23 dB
> 13,8 dB > 17 dB > 18 dB, typ 23 dB
Coupling: Insertion loss 376-2700MHz:
< 3.0 dB < 0.2 dB
< 3.0 dB < 0.2 dB
Max input power/port: 3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
500 W avg. 3 kW peak < - 117 dBm,160 dBc 50 Ohm
500 W avg. 3 kW peak < - 117 dBm,160 dBc 50 Ohm
255 x 62 x 38 mm 7/16 (f) 1.12 kg
265x 54 x 26 mm N (f) 0.45 kg
Temp. range (normal operation): Humidity: Sealing: Installation support:
-35 to +70ºC Relative 5 - 100% IP68 EG 300 0306 Bracket, stainless steel
-35 to +70ºC Relative 5 - 100% IP68 EG 300 0306 Bracket, stainless steel
Electrical Speci fi cations
3-Way Power Splitter EG 605 0021 376 - 2700 MHz
4-Way Power Splitter EG 605 0022 376 - 2700 MHz
> 18 dB, typ 23dB > 16,5 dB, typ 18dB
> 18 dB, typ 23dB > 16,5 dB, typ 18dB
Coupling: 376-2600MHz 2600-2700MHz
< 4,8 dB < 5.0 dB
< 6.0 dB < 7.0 dB
Insertion loss 376-2700MHz:
< 0.2 dB
< 0.2 dB
Max input power/port:
500 W avg. 3 kW peak
500 W avg. 3 kW peak
< - 117 dBm, 160 dBc 50 Ohm
< - 117 dBm, 160 dBc 50 Ohm
305 x 80 x 30 mm 7/16 (f) 0.9 kg
305 x 80 x 55 mm 7/16 (f) 1.1 kg
-35 to +70ºC Relative 5 - 100% IP67
-35 to +70ºC Relative 5 - 100% IP67
Product number: Passband: Input return loss: 376-500MHz 500-600MHz 600-2700MHz
Mechanic al Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations
Product number: Passband: Input return loss: 376-2600MHz 2600-2700MHz
3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
Mechanic al Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations Temp. range (normal operation): Humidity:
Egant reserves the right to change this product speci fication at any time without notice.
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail:
[email protected] www.egant.se
RevC
EGANT CELLULAR COMPONENTS
Floor 3
Power Split ters, Broadband
Floor 2
150- 2200 MHz
Floor 1
RBS
High bandw idth, 150 - 2200 MHz Splits signals in 2,-ways The 2-way splitters is designed to equally split one input signal into 2outputs. When building an indoor coverage system the splitter is often used to diverge signals between floors and antennas. The functionality of handling transmitting and receiving signals in the same path is highly bene ficial as the TX signal is split up and the RX signal is com bined in the same stage and component.
All Egant power splitters are individually designed to be as future proof as possible. They are extremely broad banded to accomodate for tomorrow’s cellular systems, thus minimizing the need to replace older components when adding new services into a system.
Design Highlig hts: · · · ·
Low insertion loss Low intermodulation Easy installation No active components (robust design)
Technical Speci fi c ations for Power Splitt ers 150 - 2200 MHz Below are some typical data. For more detailed information, please contact us.
Electrical Speci fi cations Product number: Passband:
2-Way Power Splitter EG 500 8052 150 - 2200 MHz
2-Way Power Splitter EG 605 0016 150 - 2200 MHz
Input return loss: 150-376MHz 376-2200MHz
> 10,8 dB > 18 dB
> 10,8 dB > 18 dB
Split loss:
< 3.0 dB
< 3.0 dB
Dissipative loss 150-376MHz: Dissipative loss 376-2200MHz:
< 0.35 dB < 0.4 dB
< 0.35 dB < 0.4 dB
Max input power/port:
500 W avg. 3 kW peak
500 W avg. 3 kW peak
3rd order intermodulation: IM3, 2 x 43 dBm:
< - 117 dBm, 160 dBc
< - 117 dBm, 160 dBc
Impedance in/out:
50 Ohm
50 Ohm
260 x 58 x 26 mm N (f) 0.45 kg
253 x 38 x 80 mm 7/16 (f) 1,2 kg
Mechanical Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Egant reserves the right to change this product specification at any time without notice.
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail:
[email protected] www.egant.se RevB
EGANT CELLULAR COMPONENTS
Floor 3
Power Split ters, Broadband
Floor 2
700 - 2700 MHz GSM900, GSM1800, UMTS, W-LAN
Floor 1
RBS
High bandw idth, 700 - 2700 MHz Splits sig nals in 2, 3 or 4 ways The 2-way, 3-way and 4-way power splitters are designed to equally split one input signal into 2, 3 or 4 outputs. When building an indoor coverage system the splitter is often used to diverge signals between floors and antennas. The functionality of handling transmitting and receiving signals in the same path is highly bene ficial as the TX signal is split up and the RX signal is com bined in the same stage and component.
All Egant power splitters are individually designed to be as future proof as possible. They are extremely broad banded to accomodate for tomorrow’s cellular systems, thus minimizing the need to replace older components when adding new services into a system.
Design Highlig hts: · · · ·
Low insertion loss Low intermodulation Easy installation No active components (robust design)
Technical Speci fi c ations for Power Splitt ers 700 - 2700 MHz Below are some typical data. For more detailed information, please contact us.
Electrical Speci fi cations
2-Way Power Splitter EG 500 8022 700 - 2700 MHz
3-Way Power Splitter EG 500 8023 700 - 2700 MHz
4-Way Power Splitter EG 500 8024 700 - 2700 MHz
> 18 dB, typ 23 dB < 3.0 dB < 0.15 dB < 0.25 dB 500 W avg. 3 kW peak
> 18 dB, typ 23 dB < 4.7 dB < 0.15 dB < 0.25 dB 500 W avg. 3 kW peak
> 18 dB, typ 23 dB < 6.0 dB < 0.15 dB < 0.25 dB 500 W avg. 3 kW peak
3rd order intermodulation: IM3, 2 x 43 dBm:
< - 117 dBm, 160 dBc
< - 117 dBm, 160 dBc
< - 117 dBm, 160 dBc
Impedance in/out:
50 Ohm
50 Ohm
50 Ohm
276 x 26 x 45 mm 7/16 (f) 1.12 kg
276 x 26 x 64 mm 7/16 (f) 1.20 kg
276 x 26 x 64 mm 7/16 (f) 1.20 kg
-35 to +70º C Relative 5 - 100% IP68
-35 to +70º C Relative 5 - 100% IP68
-35 to +70º C Relative 5 - 100% IP68
EG 300 0306 Bracket, stainless steel
EG 300 0306 Bracket, stainless steel
EG 300 0306 Bracket, stainless steel
2-Way Power Splitter EG 500 8012 700 - 2700 MHz
3-Way Power Splitter EG 500 8013 700 - 2700 MHz
4-Way Power Splitter EG 500 8014 700 - 2700 MHz
Input return loss: Split loss: Dissipative loss < 2 GHz: Dissipative loss >2 GHz: Max input power/port:
> 18 dB, typ 23 dB < 3.0 dB < 0.15 dB < 0.25 dB 500 W avg. 3 kW peak
> 18 dB, typ 23 dB < 4.7 dB < 0.15 dB < 0.25 dB 500 W avg. 3 kW peak
> 18 dB, typ 23 dB < 6.0 dB < 0.15 dB < 0.25 dB 500 W avg. 3 kW peak
3rd order intermodulation: IM3, 2 x 43 dBm:
< - 117 dBm, 160 dBc
< - 117 dBm, 160 dBc
< - 117 dBm, 160 dBc
Impedance in/out:
50 Ohm
50 Ohm
50 Ohm
276 x 26 x 45 mm N (f) 0.55 kg
276 x 26 x 64 mm N (f) 0.55 kg
276 x 26 x 64 mm N (f) 0.55 kg
-35 to +70º C Relative 5 - 100% IP65
-35 to +70º C Relative 5 - 100% IP65
-35 to +70º C Relative 5 - 100% IP65
EG 699 0005 Bracket, Aluminum Zinc
EG 699 0005 Bracket, Aluminum Zinc
EG 699 0005 Bracket, Aluminum Zinc
Product number: Passband: Input return loss: Split loss: Dissipative loss < 2 GHz: Dissipative loss > 2 GHz: Max input power/port:
Mechanical Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing: Installation support: Material:
Electrical Speci fi cations Product number: Passband:
Mechanical Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing: Installation support: Material:
Egant reserves the right to change this product specification at any time without notice.
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail:
[email protected] www.egant.se RevC
EGANT CELLULAR COMPONENTS
Power Split ters, Broadband 800 - 2500 MHz GSM900, CDMA, GSM1800, UMTS
Splits sign als in 2, 3 or 4 ways The power splitter is designed to equally split one input signal into 2, 3 or 4 outputs. When building an indoor coverage system the splitter is often used to split signals between floors and antennas. The functionality of handling both transmitting and receiving signals in the same path is highly bene ficial since the TX signal is split and the RX signal is com bined in the same stage and component.
TETRA, 800 - 2500 MHz The 2-way, 3-way and 4-way power splitters are individually designed to be used withGSM900, CDMA, GSM1800 and UMTS.
Design highli ghts: · · ·
Low insertion loss Easy installation No active components (robust design)
Technical Speci fi cations f or Power Splitt ers Below are some typical data. For more detailed information, please contact us.
Electrical Speci fi cations Product number: Passband: Input return loss: 800 - 2500 MHz
EG 605 0010 2-Way Splitter 800 - 2500 MHz > 20 dB
EG 605 0011 3-Way Splitter 800 - 2500 MHz > 20 dB
EG 605 0012 4-Way Splitter 800 - 2500 MHz > 20 dB
Split loss: Dissipative loss: Max input power/port:
< 3.0 dB < 0.1 dB 300 W avg.
< 4.8 dB < 0.1 dB 300 W avg.
< 6.0 dB < 0.1 dB 300 W avg.
3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
-130 dBc 50 Ohm
-130 dBc 50 Ohm
-130 dBc 50 Ohm
210 x 25 x 61 mm N (f) 0.4 kg
236 x 25 x 61 mm N (f) 0.45 kg
236 x 43 x 61 mm N (f) 0.5 kg
-35 to +75ºC Relative 5 - 95% IP65
-35 to +75ºC Relative 5 - 95% IP65
-35 to +75ºC Relative 5 - 95% IP65
Passband: Input return loss: Split loss: Dissipative loss: Max input power/port:
EG 605 0013 2-Way Splitter 800 - 2500 MHz > 19 dB < 3.0 dB < 0.3 dB 50 W avg.
EG 605 0014 3-Way Splitter 800 - 2500 MHz > 19 dB < 4.8 dB < 0.4 dB 50 W avg.
EG 605 0015 4-Way Splitter 800 - 2500 MHz > 19 dB < 6.0 dB < 0.5 dB 50 W avg.
3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
-110 dBc 50 Ohm
-110 dBc 50 Ohm
-110 dBc 50 Ohm
110 x 22 x 70 mm N (f) 0.3 kg
130 x 22 x 100 mm N (f) 0.40 kg
130 x 22 x 130 mm N (f) 0.6 kg
-35 to +70ºC Relative 5 - 100% Indoor
-35 to +70ºC Relative 5 - 100% Indoor
-35 to +70ºC Relative 5 - 100% Indoor
Mechanic al Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing:
Electrical Speci fi cations Product number:
Mechanic al Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing:
Egant reserves the right to change this product speci fication at any time without notice.
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail:
[email protected] www.egant.se RevB
EGANT CELLULAR COMPONENTS
6dB / 25%
Power Tappers 376 - 2700 MHz
7dB / 20% 10dB / 10% 13dB / 5%
TETRA, GSM900, GSM1800, UMTS, W-LAN
15dB / 3% 20dB / 1%
75% 80% 90% 95% 97% 99%
RBS
Superi or b andwi dth, 376 - 2700 MHz
Low loss design The Egant Power Tapper is designed to tap off a portion of the signal in one direction while allowing the rest of the signal to pass through with a minimum of loss. A power tapper is often used to tap off signals to antennas when building indoor or tunnel networks. The Egant Power Tapper comes in seven degrees of tapping, making it easy to choose the one that taps off the desired amount of power to the antenna.
The extremely broadbanded Egant Power Tapper is designed with ease of installation in mind. Its robust mechanical shape allows for simple attachment to a wall using clips or straps.
Installation brackets Use the flexible stainless steel mounting bracket EG 300 0306 for tappers with DIN connectors, or the EG 699 0005 bracket for N versions.
Technical Speci fi catio ns fo r Egant Power Tappers Below are some typical data. For more detailed information, please contact us.
Electrical and Mechanical Speci fi cations Frequency Band:
376 - 1000 MHz & 1710 - 2700 MHz
Input return loss: Max input power: Impedance in/out: Dimensions (W x H x D): Installation support: 3rd order intermodulation: IM3, 2 x 43 dBm:
> 17.5 dB 500 W avg. / 3 kW peak 50 Ohm 145 x 60 x 40 mm Brackets: EG 300 0306 (7/16), EG 699 0005 (N) < - 117 dBm / 160 dBc
Environmental Speci fi cations -35 to +70º C Relative 5 - 100% IP65 IP68
Temp. range (normal operation): Humidity: Sealing: N (f) Sealing: 7/16 (f) Product number:
EG 500 7404
EG 500 7406
EG 500 7407
EG 500 7408
EG 500 7409
EG 500 7410
EG 500 7413
Coupling: Insertion loss: Connectors:
-4.8 dB 0.05 dB 7/16 (f)
-6.0 dB 0.05 dB 7/16 (f)
-7.0 dB 0.05 dB 7/16 (f)
-8.0 dB 0.05 dB 7/16 (f)
-9.0 dB 0.05 dB 7/16 (f)
-10 dB 0.05 dB 7/16 (f)
-13 dB 0.05 dB 7/16 (f)
Product number:
EG 500 7415
EG 500 7420
EG 500 7430
Coupling: Insertion loss: Connectors:
-15 dB 0.05 dB 7/16 (f)
-20 dB 0.05 dB 7/16 (f)
-30 dB 0.05 dB 7/16 (f)
Product number:
EG 500 7504
EG 500 7506
EG 500 7507
EG 500 7508
EG 500 7509
EG 500 7510
EG 500 7511
Coupling: Insertion loss: Connectors:
-4.8 dB 0.05 dB N (f)
-6.0 dB 0.05 dB N (f)
-7.0 dB 0.05 dB N (f)
-8.0 dB 0.05 dB N (f)
-9.0 dB 0.05 dB N (f)
-10 dB 0.05 dB N (f)
-11 dB 0.05 dB N (f)
Product number:
EG 500 7512
EG 500 7513
EG 500 7514
EG 500 7515
EG 500 7520
EG 500 7530
Coupling: Insertion loss: Connectors:
-12 dB 0.05 dB N (f)
-13 dB 0.05 dB N (f)
-14 dB 0.05 dB N (f)
-15 dB 0.05 dB N (f)
-20 dB 0.05 dB N (f)
-30 dB 0.05 dB N (f)
1:S11 R efl Port1
L og Mag
5.0 dB/
R ef 0.00 dB
C
2:S21 Fwd Trans
L og Mag
5.0 dB/
R ef 0.00 dB
C
Meas1:Mkr7 2170.000 MHz -23.055dB
dB
Meas2:Mkr7 2170.000 MHz -13.307dB
- 5 -10 -15
7 1
2 3
4
-20
8 7
-25 4
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail:
[email protected] www.egant.se
2
56
56 1 8
-30 1 2
-35
3 -40
Start380.000 MHz
Stop Stop2 700.000 MHz MHz
Egant reserves the right to change this product speci fication at any time without notice.
RevC
EGANT CELLULAR COMPONENTS
Brackets fo r Power Split ters, Power Tappers, Combiners and Coupl ers
Save money
Ad ju st abl e br ack ets , opt imi zed f or tu nnels and harsh environments To simplify installation our brackets are multiadjustable and made with ease of installation in mind.
Our brackets are optimized for Power Tap pers, Power Splitters, Combiners and Cou plers. When opting for quick and easy installation, make sure to use our tailor made stainless steel or aluzinc brackets.
Technical Speci fi cations - Brackets Below are some typical data. For more detailed information, please contact us.
Product number:
EG 300 0306
EG 300 0307
EG 699 0005
Dimensions (W x H x D): Weight: Material:
30 x 77 x 80 mm 0.2 kg Stainless steel A4
30 x 77 x 80 mm 0.2 kg Aluzinc
80 x 60 x 30 mm 0.15 kg Aluzinc
Product number:
EG 699 0006
EG 699 0007
330 x 15 x 35 mm 0.3 kg Aluzinc
257 x 15 x 35 mm 0.2 kg Aluzinc
Mechanic al Speci fi cations
Mechanic al Speci fi cations Dimensions (W x H x D): Weight: Material:
EG 699 0006 Bracket for Egant combiners
EG 699 0007 Bracket for Egant cellular couplers
EG 699 0005 Bracket for Egant splitters/tappers (N) EG 300 0306, EG 300 0307 Bracket for Egant splitters/tappers (7/16) Egant reserves the right to change this product speci fication at any time without notice.
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail:
[email protected] www.egant.se RevC
EGANT CELLULAR COMPONENTS
Power Split ters, Broadband Floor 2
376 - 2500 MHz TETRA, NMT, GSM900, GSM1800, UMTS, W-LAN
Floor 1
RBS
TETRA-WLAN, 376 - 2500 MHz Splits sig nals in 2, 3 or 4 ways The power splitter is designed to equally split one input signal into 2, 3 or 4 outputs. When building an indoor coverage system the splitter is often used to split signals between floors and antennas. The functionality of handling both transmitting and receiving signals in the same path is highly bene ficial since the TX signal is split and the RX signal is com bined in the same stage and component.
The 2-way, 3-way and 4-way power splitters are individually designed to be used with TETRA, NMT, GSM900, GSM1800, UMTS and W-LAN.
Design highli ghts: · · · ·
Low insertion loss Low intermodulation Easy installation No active components (robust design)
Technical Speci fi cations fo r Power Splitters Below are some typical data. For more detailed information, please contact us.
Electrical Speci fi cations Product number:
EG 605 0001 2-Way Splitter
EG 605 0002 3-Way Splitter
EG 605 0003 4-Way Splitter
Passband:
376 - 2500 MHz
376 - 2500 MHz
376 - 2500 MHz
Split loss: Dissipative loss:
> 18 dB, typ 23 dB < 3.0 dB
> 18 dB, typ 23 dB < 4.7 dB
> 18 dB, typ 23 dB < 6.0 dB
Max input power/port:
< 0.05 dB
< 0.05 dB
< 0.05 dB
3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
700 W avg. 3 kW peak
700 W avg. 3 kW peak
700 W avg. 3 kW peak
< - 117 dBm,160 dBc 50 Ohm
< - 117 dBm,160 dBc 50 Ohm
< - 117 dBm,160 dBc 50 Ohm
276 x 26 x 45 mm N (f) 0.45 kg
276 x 26 x 45 mm N (f) 0.50 kg
276 x 26 x 45 mm N (f) 0.55 kg
-35 to +70º C Relative 5 - 100% IP65 EG 699 0005 Bracket, aluzinc
-35 to +70º C Relative 5 - 100% IP65 EG 699 0005 Bracket, aluzinc
-35 to +70º C Relative 5 - 100% IP65 EG 699 0005 Bracket, aluzinc
Mechanical Speci fi cations Dimensions (W x H x D): Connectors: Weight:
Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing: Installation support:
Electrical Speci fi cations Product number: Passband:
EG 500 8030 2-Way Splitter 376 - 2500 MHz
Input return loss: Split loss: Dissipative loss: 376 - 800 MHz: 800 - 2500 MHz:
> 18 dB, typ 23 dB < 3.0 dB
Max input power/port:
700 W avg. 3 kW peak
3rd order intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
< - 117 dBm ,160 dBc 50 Ohm
< 0.2 dB < 0.1 dB
Mechanical Speci fi cations Dimensions (W x H x D): Connectors: Weight:
276 x 26 x 45 mm 7/16 (f) 1,12 kg
Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing: Installation support:
Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone:+46 (0)8 620 06 50 Fax: +46 (0)70 386 53 53 E-mail:
[email protected] www.egant.se
-35 to +70º C Relative 5 - 100% IP68 EG 300 0306 Bracket, stainless steel Egant reserves the right to change this product speci fication at any time without notice.
RevC
