EGANT Multi Operator Combiners

EGANT CELLULAR COMPONENTS

Multi Operator Operator Combiner 2 xCDMA800/GSM900, 4 x GSM1800, 4 x UMTS 4 Ant enna Port Port s

Combin es up to 10 RBSs into 4 antenna ports This Multi Operator Combiner enables up to 10 Radio Base Stations to connect to the combiner: 2 CDMA800/GSM900 Radio Base Stations 4 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the signals to the 4 antenna ports, or splits the signal to the 10 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by installing o ur Multi Save Operator Combiner By utilizing the Egant Multi Operator Com biner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.

Technical Speci fi c ations for the Multi Operator Operator Combiner Below are some typical data. For more detailed information, please contact us.

Electrical Speci fi cations Product number: Passband: Port 1: CDMA800/GSM900 Port 2: CDMA800/GSM900

EG 601 0074

EG 601 0075

806 - 960 MHz 806 - 960 MHz

806 - 960 MHz 806 - 960 MHz

Port 3: GSM1800 Port 4: GSM1800 Port 5: GSM1800 Port 6: GSM1800 Port 7: UMTS Port 8: UMTS Port 9: UMTS Port 10: UMTS

1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz


Insertion loss: Port 1 - 2: CDMA800 - ANT 1 - 4 Port 3 - 6: GSM1800 - ANT 1 - 4 Port 7 - 10: UMTS - ANT 1 - 4

< 1.2 dB < 1.2 dB < 1.2 dB

< 1.2 dB < 1.2 dB < 1.2 dB

Coupling: Port 1 - 2: CDMA800 - ANT 1 - 4 Port 3 - 6: GSM1800 - ANT 1 - 4 Port 7 - 10: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB

Input return loss: Isolation between systems: Isolation between same systems: Intermodulation 2 x 43 dBm:

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

Max input power/port: Impedance in/out:

60 W 50 Ohm

60 W 50 Ohm

450 x 250 x 500 mm 7/16 (f) N(f) 19 kg

450 x 250 x 500 mm N (f) N(f) 19 kg

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%

Mechanical Speci fi cations Dimensions (W x H x D): Input connectors: Output connectors: Weight:

Environmental Speci fi cations Temp. range (normal operation): Humidity: Egant reserves the right to change this product specification at any time without notice.

Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 620 06 50 Fax: +46 (0)70 386 53 53 E-mail: [email protected] www.egant.se RevA



EG 601 0074

EG 601 0075

806 - 960 MHz 806 - 960 MHz

806 - 960 MHz 806 - 960 MHz





< 1.2 dB < 1.2 dB < 1.2 dB

< 1.2 dB < 1.2 dB < 1.2 dB


6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

60 W 50 Ohm

450 x 250 x 500 mm 7/16 (f) N(f) 19 kg

450 x 250 x 500 mm N (f) N(f) 19 kg

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%




ANT2

EGANT ANT1

CELLULAR COMPONENTS

Multi Operator Operator Combiner 2 x GSM900, GSM1800, UMTS 6 Input Input s to 2 Antenna Port Port s

0 0 0 0 9 9 0 0 0 M M 8 0 S S S S 1 8 1 T T G G M M M S M S U U G G

Combin es 6 RBSs into 2 antenna por ts This Multi Operator Combiner enables 6 Radio Base Stations to connect to the combiner: 2 GSM900 Radio Base Stations 2 GSM1800 Radio Base Stations 2 UMTS Radio Base Stations The combiner combines the 6 signals to the 2 antenna ports, or splits the signal to the 6 RBSs in the receiving direction. This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by installing o ur Multi Save Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.

Technical Specifi cations for the Multi Operator Combiner Below are some typical data. For more detailed information, please contact us.

Electrical Speci fi cations Product number: Passband: Port1 GSM900: Port2 GSM900: Port3 GSM1800: Port4 GSM1800: Port5 UMTS: Port6 UMTS:

EG 100 4201 806 - 960 MHz 806 - 960 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz

Insertion loss: Port 1 + 2 GSM900 - ANT 1 + 2: Port 3 + 4 GSM1800 - ANT 1 + 2: Port 5 + 6 UMTS - ANT 1 + 2:

< 4.0 dB (3.3 dB typ) < 4.0 dB (3.4 dB typ) < 4.0 dB (3.5 dB typ)


> 20.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

Mechanic al Speci fi cations Dimensions (W x H x D): Connectors: Weight:

350 x 400 x 220 mm 7/16 (f) 12 kg

Environmental Speci fi cations Temp. range (normal operation): Humidity:

-30 to +70º C Relative 5 - 100%

Egant reserves the right to change this product speci fication at any time without notice.

Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 620 06 50 Fax: +46 (0)70 386 53 53 E-mail: [email protected] www.egant.se RevB


Multi Operator Operator Combiner

Preliminary

3xUMTS, 2xGSM1800, 2xGSM900 7 Input Input s to 4 Ant enna Port Port

Combines 7 RBS´s RBS´s int o 4 Antenna-port Antenna-port . The Multi Operator Combiner allows you to connect up to 8 Radio Base Stations to the Com biner.. biner 3 UMTS Radio Base Stations 2 GSM1800 Radio Base Stations 2 GSM900 Radio Base Stations The Combiner combines the 7 signals to the 4-Antenna ports or in the receiving way splits the signal to the 7 RBS´s. This is a extremely important function when you are designing shared antenna systems and like to connect multiple RBS’ RBS’ss to the same antennas.



Electrical Speci fi cations Product number: Passband Port 1 GSM900: Port 2 GSM900: Port 3 UMTS: Port 4 UMTS: Port 5 UMTS: Port 6 GSM1800: Port 7 GSM1800:

EG 601 0055 806 - 960MHz 806 - 960MHz 1920 - 2170MHz 1920 - 2170MHz 1920 - 2170MHz 1710 - 1880MHz 1710 - 1880MHz

Insertion loss: Port 1 - 7 to ANT:

< 7,5 dB (6,5 typ.)

Input return loss: Isolation between systems: Isolation between same systems: Intermodulation 2 x 43dBm:

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160dBc)


60 W 50 Ohm

Mechanical Speci fi cations Dimensions (W x H x D): Connectors: Weight:

300 x 400 x 180 mm 7/16 (f) 16 kg


-30 to +70º C Relative 5 - 100%

Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone:+46 (0)8 620 06 50 Fax: +46 (0)70 386 53 53 E-mail: [email protected] www.egant.se Preliminary RevB


ANT

Multi Operator Operator Combiner 3xUMTS, 3xGSM1800, 2xGSM900 8 Input Input s to 1 Ant enna Port Port

0 0 0 9 0 9 M S M G S G

0 0 0 0 0 S S 8 8 0 T T S T 1 1 8 M 1 U M M M M U U S S M S G G G

Combines 8 RBS´s RBS´s int o 1 Antenna-port Antenna-port . The Multi Operator Combiner allows you to connect up to 8 Radio Base Stations to the Com biner.. biner 4 UMTS Radio Base Stations 4 GSM1800 Radio Base Stations 2 GSM900 Radio Base Stations The Combiner combines the 8 signals to the 1-Antenna port or in the receiving way splits the signal to the 8 RBS´s. This is a extremely important function when you are designing shared antenna systems and like to connect multiple RBS’ RBS’ss to the same antennas.


Technical Speci fi c ations for the Multi Operator Combiner Below are some typical data. For more detailed information, please contact us.

Electrical Speci fi cations Product number: Passband Port1: GSM900 Port2: GSM900 Port3: UMTS Port4: UMTS Port5: UMTS Port6: GSM1800 Port7: GSM1800 Port8: GSM1800

EG 601 0034 806 - 960MHz 806 - 960MHz 1920 – 2170MHz 1920 – 2170MHz 1920 – 2170MHz 1710 – 1880MHz 1710 – 1880MHz 1710 – 1880MHz

Insertionloss Port1-8 - ANT

< 5.5 dB

Input return loss: Isolation between Systems: Isolation between same Systems: Intermodulation 2x43dBm

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160dBc)


60 W 50 Ohm

Mechanical Speci fi cations

300 x 400 x 180 mm 7/16 (f) 16 kg

Dimensions (WxHxD): Connectors: Weight:


- 30 to + 70º C Relative 5 - 100%

Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone:+46 (0)8 62 00 650 Fax: +46 (0)70 386 53 53 E-mail: [email protected] www.egant.se Preliminary


Multi Operator Combiner 2x TETRA/CDMA, 1x GSM900, 3xGSM1800, 2xUMTS 8 Port s In - 4 Ports Out

Save money by installing o ur Multi Operator Combiner Combin es 12 RBSs into 4 antenna port s This Multi Operator Combiner enables 12 Radio Base Stations to connect to the combiner: 2 TETRA/CDMA 1 GSM900 / CDMA Radio Base Stations 3 GSM1800 Radio Base Stations 2 UMTS Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.



Multi Operator Combiner 1 x 380 - 520MHz 4 x 800 - 2200 MHz 4 x Antenna Port s 5 Input s to 4 Antenna Port s

Combin es up to 5 RBSs int o 4 antenna port s The Multi Operator Combiner enables a maximum of Radio Base Stations to connect to the combiner: 1 TETRA Radio Base Station 4 Cellular Radio Base Station The combiner combines the TETRA and 800 2200MHz signals to the 4 antenna ports or splits the signal in the receiving direction. This is a very important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by installing o ur Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will render you all the benefits of antenna sharing.

Technical Speci fi cations for the Mult i Operator Combin er Below are some typical data. For more detailed information, please contact us.

Electrical Speci fi cations Product number: Passband: Port 1 : Port 2: Port 3: Port 4: Port 5:

EG 601 0095 380 - 520 MHz 800 - 2200 MHz 800 - 2200 MHz 800 - 2200 MHz 800 - 2200 MHz

Insertion loss: Port 1 - 5: ANT 1 - ANT 4:

< 1.2 dB

Coupling: Port 1 - 5: ANT 1 - ANT 4:

6.0 dB +/- 0.6dB


> 18.0 dB > 50 dB > 30 dB < 117 dBm (160 dBc)

Max input power/port:

60 W

Impedance in/out:

50 Ohm

Mechanical Speci fi cations Dimensions (W x H x D): Input connectors: Antenna connectors: Weight:

450 x 250 x 500 mm N (f) N(f) 18 Kg

Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing:

0 to +55º C Relative 5 - 95% Indoor use

Egant reserves the right to change this product specification at any time without notice.

Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone: +46 (0)8 620 06 50 Fax: +46 (0)70 386 53 53 E-mail: [email protected] www.egant.se Rev A


Electrical Speci fi cations Product number: Passband: Port 1 TETRA / CDMA: Port 2 TETRA / CDMA: Port 3 GSM900: Port 4 GSM1800: Port 5 GSM1800: Port 6 GSM1800: Port 7 UMTS: Port 8 UMTS:

EG 601 0079 376 - 500 MHz 376 - 500 MHz 824 - 960 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz

Insertion loss: Port 1 - 2 TETRA / CDMA: Port 3 GSM900 - ANT 1 - 4: Port 4 - 6 GSM1800 - ANT 1 - 4: Port 7 - 8 UMTS - ANT 1 - 4:

< 7.9 dB (7 dB typ) < 7.9 dB (7 dB typ) < 7.9 dB (7 dB typ) < 7.9 dB (7 dB typ)


> 16.0 dB > 35 dB > 25 dB < 117 dBm (160 dBc)


20 W 50 Ohm


494 x 214 x 500 mm 7/16 (f) 24 kg


-30 to +70º C Relative 5 - 100%




Multi Operator Combiner 3 x 376 - 470MHz syst ems t o 1 Ant enna port

Combin e 3 RBS’s int o 1 Antenna. Do you have Radio Base Stations or Repeaters that you like to combine to the same antenna. Connect your RBS’s to the 3-Way Combiner and it will give you an optimum combination with as less loss as possible. The combiner gives you an easy solution so you don’t need to worry about isolation or intermodulation in your system.


Electrical Speci fi cations Product number: Passband: Port 1 : Port 2: Port 3:

EG 601 0059 376 - 470 MHz 376 - 470 MHz 376 - 470 MHz

Insertion loss: Port 1 - 3 to ANT 1

< 6.2 dB + 0,4 dB

Input return loss: Isolation between same systems:

> 18.0 dB > 25 dB (35dB typ)


60 W 50 Ohm

Mechanical Speci fi cations Dimensions 19” rack: Connectors: Weight:

3HE 7/16 (f) 5 kg


-30 to +70º C Relative 5 - 100%



EGANT

y a r n i i m l e P r

CELLULAR COMPONENTS

1 T N A

S T M U

0 0 8 1 M S G

0 0 9 M S G

2 T N A

R M S G

Multi Operator Combiner DVB-H, TETRA, GSM-R, GSM900 GSM1800, UMTS 6 Input s to 2 Antenna Port s

H B V D

A R T E T

Combines 6 RBSs int o 2 antenna port s This Multi Operator Combiner enables 3 Radio Base Stations to connect to the combiner: 1 DVB-H Radio Base Stations 1 TETRA Radio Base Station 1 GSM-R Radio Base Station 1 GSM900 Radio Base Station 1 GSM1800 Radio Base Station 1 UMTS Radio Base Station The combiner combines the 6 signals to the 2 antenna ports, or splits the signal to the 6 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by installing our Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.


Electrical Speci fi cations EG 601 0057

Product number: Passband: Port 1 DVB-H: Port 2 GSM-R: Port 3 GSM900: Port 4 GSM1800: Port 5 UMTS: Port 6 TETRA: Insertion loss: Port 1 to ANT 1 Port 2 to ANT 1 Port 3 to ANT 1 Port 4 to ANT 1 Port 5 to ANT 1 Port 6 to ANT 1 -

380 - 710 MHz 876 - 925 MHz 880 - 960 MHz 1710 - 1880 MHz 1920 - 2170 MHz 370 - 400 MHz

2: 2: 2: 2: 2: 2:

< 5.0 dB (typ 4.0 dB) < 4.0 dB (typ 3.5 dB) < 4.5 dB (typ 4.0 dB) < 4.5 dB (typ 4.0 dB) < 4.5 dB (typ 4.0 dB) < 4.0 dB (typ 3.5 dB)

Input return loss:

> 16.0 dB

Isolation GSM900 <> GSM1800 <> UMTS GSM-R <> GSM1800 / UMTS GSM-R <> GSM900 DVB-H <> GSM-R /GSM900 / GSM1800 / UMTS DVB-H <> TETRA

> 50 dB > 70 dB > 25 dB > 40 dB > 22 dB


50 W 50 Ohm

Antenna test ports Port 4, Ant 1 370 - 2170 MHz Port 5, Ant 2 370 - 2170 MHz

-30.0 dB + 1dB -30.0 dB + 1dB

Mechanical Speci fi cations Dimensions (WxHxD): Connectors: Weight:

400 x 300 x 120 mm 7/16 (f) 11 kg


-30 to +70º C Relative 5 - 100%


Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone:+46 (0)8 620 06 50 Fax: +46 (0)70 386 53 53 E-mail: [email protected] www.egant.se RevA

EGANT CELLULAR COMPONENTS ANT1

ANT2

EGANT

ANT3

CELLULAR COMPONENTS ANT4

Multi Operator Combiner 4 x GSM900, GSM1800, UMTS 1 x TETRA / PMR, FM 14 Inputs to 4 Antenna Ports

TETRA / PMR FM

0 0 0 0 0 0 0 0 0 0 S 0 0 9 0 0 T S S 9 9 0 8 1 8 8 0 1 1 8 M T T S M 9 1 U M M T M S M S M M S M M U U M S G U G G S G S S M G G S G G

Save money by installing o ur Multi Operator Combiner

Combi nes GSM900 / GSM1800 / UMTS / TETRA / FM into 4 antenna ports The Multi Operator Combiner enables a maximum of 14 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations 1 TETRA / PMR Radio Base Station 1 FM Radio Base Station The combiner combines the 14 signals to the 4 antenna ports, or splits the signal to the 14 RBSs in the receiving direction. This is a very important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will render you all the benefits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1 GSM900 - 1: Port 2 GSM900 - 2: Port 3 GSM900 - 3: Port 4 GSM900 - 4: Port 5 GSM1800 - 1: Port 6 GSM1800 - 2: Port 7 GSM1800 - 3: Port 8 GSM1800 - 4: Port 9 UMTS - 1: Port 10 UMTS - 2: Port 11 UMTS - 3: Port 12 UMTS - 4: Port 13 TETRA (option EG 601 0018): Port 14 FM (option EG 601 0018):

EG 601 0017 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 1710 -1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 376 - 500 MHz 88 - 108 MHz

Insertion loss: Port 1 - 4 GSM900 - ANT 1 - 4: Port 5 - 8 GSM1800 - ANT 1 - 4: Port 9 - 12 UMTS - ANT 1 - 4: Port 13 TETRA - ANT 1 - 4: Port 14 FM - ANT 1 - 4:

< 1.0 dB < 1.0 dB < 1.0 dB < 1.0 dB < 1.0 dB

Coupling (1 INPUT 4 - OUT): Port 1, 2, 5, 6, 11, 12 to ANT 1 - 4: Port 3, 7 to - ANT 3, 4: Port 3, 7 to - ANT 2 (option EG 601 0019): Port 4, 8 to - ANT 1, 2: Port 4, 8 to - ANT 3 (option EG 601 0019): Port 13 to ANT 1 - 4: Port 14 to ANT 1 - 4:

6.0 dB +/- 0.5 dB 6.0 dB +/- 0.5 dB 30.0 dB +/- 0.5 dB 6.0 dB +/- 0.5 dB 30.0 dB +/- 0.5 dB 6.0 dB +/- 0.5 dB 6.0 dB +/- 0.5 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

Mechanical Speci fi cations Dimensions (W x H x D): Connectors port 1 - 12: Connectors port 13, 14: Weight:

300 x 800 x 180 mm 7/16 (f) N (f) 28 kg


-30 to +70º C Relative 5 - 100%




Multi Operator Combiner 88 - 500MHz, GSM900 5 Input s - 4 Outpu t

890-960

Port 1 88 - 500MHz

890-960

Port 2 88 - 500MHz

Feeder3

88 - 500 890-960

Port 4 88 - 500MHz

Feeder2

88 - 500

890-960

Port 3 88 - 500MHz

Feeder1

88 - 500

Feeder4

88 - 500

Port 5 GSM900

Save money by inst alling our Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.

Connects GSM900 and 88-500MHz systems to 4 antenna port s This Multi Operator Combiner enables the connection of 5 RBSs/repeaters to the combiner. The combiner combines the 5 signals to the 4 antenna ports, or splits the signal to the 5 RBSs in the receiving way. This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Technical Speci fi cations for the Multi Operator Combiner Below are some typical data. For more detailed information, please contact us.

Electrical Speci fi cations Product number: Passband: Port 1 - 4: Port 5, GSM900:

EG 601 0061 88 - 500 MHz 890 - 960 MHz

Insertion loss: Port 1 to ANT 1: Port 2 to ANT 2: Port 3 to ANT 3: Port 4 to ANT 4: Port 5 to ANT 1-4:

< 0.5 dB (0.25dB typ.) < 0.5 dB (0.25dB typ.) < 0.5 dB (0.25dB typ.) < 0.5 dB (0.25dB typ.) < 7.0 dB (6.4dB typ.)

Input return loss: Isolation between systems:

> 16.0 dB > 50 dB

Max input power/port: Port 1-4: Port 5:

300W 150W

Impedance in/out:

50 Ohm

Mechanic al Speci fi cations Dimensions (W x H x D): Connectors: Weight:

250 x 150 x 250 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%

Egant reserves the right to change this product speci fication at any time without notice.


EGANT

y a r n i i m l e P r

CELLULAR COMPONENTS

1 T N A

R M P

2 T N A

A R T E T

Multi Operator Combiner PMR, TETRA, GSM-R 3 Input s to 2 Antenna Port s

R M S G

Combines 3 RBSs int o 2 antenna port s This Multi Operator Combiner enables 3 Radio Base Stations to connect to the combiner: 1 PMR Radio Base Stations 1 TETRA Radio Base Station 1 GSM-R Radio Base Station The combiner combines the 3 signals to the 2 antenna ports, or splits the signal to the 3 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1 PMR: Port 2 TETRA: Port 3 GSM-R / GSM900:

EG 601 0056 50 - 470 MHz 370 - 480 MHz 870 - 960 MHz

Insertion loss: Port 1 - 2 to ANT 1 - 2: Port 3 to ANT 1 - 2:

< 4.0 dB (typ 3.3 dB) < 3.5 dB (typ 3.2 dB)

Input return loss:

> 16.0 dB

Isolation Port 1 to Port 2: Port 1+2 to Port 3:

> 25 dB > 50 dB


50 W 50 Ohm

Antenna test ports Port 4, Ant 1 370 - 960 MHz Port 5, Ant 2 370 - 960 MHz

-30.0 dB + 1dB -30.0 dB + 1dB


200 x 300 x 120 mm 7/16 (f) 6 kg


-30 to +70º C Relative 5 - 100%




ANT2

EGANT

ANT3


Multi Operator Combiner 4 x GSM900, GSM1800, UMTS 12 Inputs to 4 Antenna Ports


Combi nes GSM900 / GSM1800 / UMTS into 4 antenna ports The Multi Operator Combiner enables a maximum of 12 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 12 signals to the 4 antenna ports, or splits the signal to the 12 RBSs in the receiving direction. This is a very important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by installing o ur Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will render you all the benefits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 GSM900: Port 3 GSM900: Port 4 GSM900: Port 5 GSM1800: Port 6 GSM1800: Port 7 GSM1800: Port 8 GSM1800: Port 9 UMTS: Port 10 UMTS: Port 11 UMTS: Port 12 UMTS:

EG 100 4202 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 1710 -1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

Insertion loss: Port 1 - 4 GSM900 - ANT 1 - 4: Port 5 - 8 GSM1800 - ANT 1 - 4: Port 9 - 12 UMTS - ANT 1 - 4:

< 1.0 dB < 1.0 dB < 1.0 dB

Coupling (1 INPUT 4 - OUT): Port 1 - 4 GSM900 - ANT 1 - 4: Port 5 - 8 GSM1800 - ANT 1 - 4: Port 9 - 12 UMTS - ANT 1 - 4:

6.0 dB +/- 0.5 dB 6.0 dB +/- 0.5 dB 6.0 dB +/- 0.5 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 180 mm 7/16 (f) 22 kg


-30 to +70º C Relative 5 - 100%



EGANT ANT1

ANT3

ANT2

CELLULAR COMPONENTS

ANT4

Multi Operator Combiner 4 x GSM900, UMTS 8 Input s to 4 Antenna Port s

0 0 0 0 9 0 0 0 9 9 0 M 9 S M M S S M G G G S G

S S T T S S T T M M U U M M U U

Save money by installing o ur Multi Operator Combiner Combines 8 RBSs int o 4 antenna port s This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction.This is a highly im portant function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation.It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 GSM900: Port 3 GSM900: Port 4 GSM900: Port 5 UMTS: Port 6 UMTS: Port 7 UMTS: Port 8 UMTS:


Insertion loss: Port 1 - 4 GSM900 - ANT 1 - 4: Port 5 - 8 UMTS - ANT 1 - 4:

< 7.0 dB < 7.0 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%




ANT1 ANT3

ANT2

0 0 0 0 9 0 0 0 9 0 M 9 9 M S S M G G S M G S G

ANT4

0 0 0 S 8 0 0 T 1 8 0 1 8 M 1 M M U S S M G G S G

Combines 8 RBSs int o 4 antenna port s This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 1800 Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly im portant function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Multi Operator Combiner 4 x GSM900, GSM1800 8 Input s to 4 Antenna Port s

Save money by installing our Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 GSM900: Port 3 GSM900: Port 4 GSM900: Port 5 GSM1800: Port 6 GSM1800: Port 7 GSM1800: Port 8 GSM1800:


Insertion loss: Port 1 - 4 GSM900 - ANT 1 - 4: Port 5 - 8 GSM1800 - ANT 1 - 4:

< 7.0 dB < 7.0 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%




Multi Operator Combiner 4 x GSM900 / CDMA, GSM1800, UMTS 12 Ports In - 4 Port s Out

Save money by installing o ur Multi Operator Combiner Combin es 12 RBSs into 4 antenna port s This Multi Operator Combiner enables 12 Radio Base Stations to connect to the combiner: 4 GSM900 / CDMA Radio Base Stations 4 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 12 signals to the 4 antenna ports, or splits the signal to the 12 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.




EG 100 4210

824 - 960 MHz 824 - 960 MHz 824 - 960 MHz 824 - 960 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz


Insertion loss: Port 1 - 4 GSM900 - ANT 1 - 4: Port 5 - 8 GSM1800 - ANT 1 - 4: Port 9 - 12 UMTS - ANT 1 - 4:

< 7.9 dB (7 dB typ) < 7.9 dB (7 dB typ) < 7.9 dB (7 dB typ)



> 17.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 17.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


100 W 50 Ohm

100 W 50 Ohm

494 x 214 x 500 mm N (f) 24 kg

494 x 214 x 500 mm 7/16 (f) 24 kg

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%

Product number: Passband: Port 1 GSM900 / CDMA: Port 2 GSM900 / CDMA: Port 3 GSM900 / CDMA: Port 4 GSM900 / CDMA: Port 5 GSM1800: Port 6 GSM1800: Port 7 GSM1800: Port 8 GSM1800: Port 9 UMTS: Port 10 UMTS: Port 11 UMTS: Port 12 UMTS:



Antenna 4 Ports (all systems)

1920 - 2170 MHz 4 Ports

824 - 960 MHz 4 Ports

Monitor Port -30 dB

1710 - 1880 MHz 4 Ports



Multi Operator Combiner 4 xCDMA800/GSM900, 4 x GSM1800, 4 x UMTS 4 Ant enna Port s


Save money by installing o ur Multi Operator Combiner By utilizing the Egant Multi Operator Com biner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1: CDMA800/GSM900 Port 2: CDMA800/GSM900 Port 3: CDMA800/GSM900 Port 4: CDMA800/GSM900 Port 5: GSM1800 Port 6: GSM1800 Port 7: GSM1800 Port 8: GSM1800 Port 9: UMTS Port 10: UMTS Port 11: UMTS Port 12: UMTS

EG 601 0048 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz


< 1.2 dB < 1.2 dB < 1.2 dB


6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


450 x 250 x 500 mm N (f) 20 kg


-30 to +70º C Relative 5 - 100%



ANT


3G / UMTS Upg rade Module 2G - 3G / UMTS

Existing indoor System GSM900, GSM1800 CDMA/AMPS

S T M U / G 3 3

Save money Connects 3G / UMTS to exis tin g 2G indoor system This 3G Upgrade Module enables the connection of 3G / UMTS to your existing 2G infrastructure. This is a cost effective solution when adding 3G to your system. 2G systems are easily connected to the Upgrade Module and then combined with the 3G system, which in turn makes all systems available at the common antenna port.

Installing the 3G Upgrade Module will render you instantaneous savings since it enables you to use your existing antenna system. Moreover, it eliminates the cost of additional feeders, grounding kits, clamps, installation and maintenance.

Technical Speci fi c ations for the 3G / UMTS Upgr ade Modul e Below are some typical data. For more detailed information, please contact us.

Electrical Speci fi cations Product number: Passband: Port 1: Port 2:

EG 601 0002 806 - 960 MHz & 1710 - 1880 MHz 1920 - 2170 MHz

Insertion loss: Port 1: Port 2:

< 0.7 dB (0.5 typ) < 0.5 dB (0.2 typ)

Input return loss: Isolation between systems:

> 18.0 dB > 50 dB

Max input power/port: Port 1: Port 2:

< 250 W < 100 W

Impedance in/out:

50 Ohm


480 x 434 x 140 mm 7/16 (f) 11 kg

Environmental Speci fi cations Temp. range (normal operation): Humidity: Sealing:

-40 to +70º C Relative 5 - 100% IP65




Multi Operator Combiner 1 x CDMA / GSM900, 4 x UMTS 5 Input s to 2 Antenna Port s

Combin es 5 RBSs into 4 antenna por ts This Multi Operator Combiner enables 5 Radio Base Stations to connect to the combiner: 1 GSM900 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 5 signals to the 4 antenna ports, or splits the signal to the 5 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by installing o ur Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.



EG 601 0004

806 - 960 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

806 - 960 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

Insertion loss: Port 1 GSM900 - ANT 1 - 4: Port 2 - 5 UMTS - ANT1 - 4:

< 7.0 dB (6.5 typ) < 7.0 dB (6.5 typ)

< 7.0 dB (6.5 typ) < 7.0 dB (6.5 typ)

Test port -30 dB:

-30 dB +/- 0.5 dB

-30 dB +/- 0.5 dB


> 18.0 dB > 50 dB > 30 dB < 150 dBc

> 18.0 dB > 50 dB > 30 dB < 150 dBc


100 W 50 Ohm

100 W 50 Ohm

494 x 214 x 500 mm N (f) 15 kg

494 x 214 x 500 mm 7/16 (f) 15 kg

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%

Product number: Passband: Port 1 CDMA / GSM900: Port 2 UMTS: Port 3 UMTS: Port 4 UMTS: Port 5 UMTS:





Multi Operator Combiner 1xCDMA, 3xGSM1800, 4xUMTS 8 Port s In - 4 Ports Out 1 Monitor Port

Save money by installing o ur Multi Operator Combiner Combin es 8 RBSs into 4 antenna por ts This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner: 1 CDMA Radio Base Stations 3 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.




EG 601 0070



Insertion loss: Port 1 GSM900 - ANT 1 - 4: Port 2 - 4 GSM1800 - ANT 1 - 4: Port 5 - 8 UMTS - ANT 1 - 4:



Monitoring port 30dB

-30dB +/- 2dB

-30dB +/- 2dB


> 18.0 dB > 70 dB > 30 dB < 140 dBc

> 18.0 dB > 70 dB > 30 dB < 140 dBc


100 W 50 Ohm

100 W 50 Ohm

494 x 214 x 500 mm N (f) 30 kg

494 x 214 x 500 mm 7/16 (f) 30 kg

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%

Product number: Passband: Port 1 GSM900 / CDMA: Port 2 GSM1800: Port 3 GSM1800: Port 4 GSM1800: Port 5 UMTS: Port 6 UMTS: Port 7 UMTS: Port 8 UMTS:



Antenna 4 Ports (all systems)

1920 - 2170 MHz 4 Ports

820 - 960 MHz 1 Ports

Monitor Port -30 dB

1710 - 1880 MHz 3 Ports



ANT1

Multi Operator Operator Combiner UMTS 3 Input Input s - 1 Outpu Outpu t

EG 601 007

Save money by installing o ur Multi Save Operator Combiner

S S T T S M M T U U M U

Combin es 3 UMT UMTS S signals i nto 1 antenna port This Multi Operator Combiner enables the connection of 3 RBSs/repeaters RBSs/repeater s to the combiner. The combiner combines the 3 signals to the antenna port, or splits the signal to the 3 RBSs in the receiving way. This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1 - 3 UMTS:

EG 601 0007 1920 - 2170 MHz

Insertion loss: Port 1 - 3 UMTS - ANT 1:

< 5.0 dB


> 18.0 dB > 25 dB


60 W 50 Ohm


300 x 100 x 350 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%



EGANT

ANT2

CELLULAR COMPONENTS

ANT1

Multi Operator Operator Combiner 2 x GSM900, GSM1800 4 Input Input s to 2 Antenna Port Port s

0 0 9 M S G

0 0 9 S M T S M G U

0 0 8 1

0 0 8 1

M S M S G G

Combines 4 RBSs RBSs int o 2 antenna antenna port s This Multi Operator Combiner enables 4 Radio Base Stations to connect to the combiner: 2 GSM900 Radio Base Stations 2 GSM1800 Radio Base Stations The combiner combines the 4 signals to the 2 antenna ports, or splits the signal to the 4 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by inst alling our Multi Save Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 GSM900:

EG 601 0089

Port 3 GSM1800: Port 4 GSM1800:

1710 - 1880 MHz 1710 - 1880 MHz


< 4.0 dB (typ 3.3 dB) < 4.0 dB (typ 3.4 dB)

Input return loss: Isolation between systems: Isolation between same systems: Intermodulation 2 x 43 dBm

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

880 - 960 MHz 880 - 960 MHz


300 x 400 x 120 mm 7/16 (f) 8 kg


-30 to +70º C Relative 5 - 100%




Electrical Speci fi cations Product number: Passband: Port 1 - 3 UMTS:

EG 601 0007 1920 - 2170 MHz

Insertion loss: Port 1 - 3 UMTS - ANT 1:

< 5.0 dB


> 18.0 dB > 25 dB


60 W 50 Ohm


300 x 100 x 350 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%



EGANT

ANT1 ANT2

CELLULAR COMPONENTS

Multi Operator Combiner 3 x GSM900, GSM1800, UMTS 9 Input s to 2 or 4 Ant enna Port s

0 0 0 9 0 0 9 0 0 9 0 0 0 M 0 S M M 8 0 S 1 8 8 G G S 1 1 S T S S G M M M M T T S S S M M G G G U U U

Save money by installing o ur Multi Operator Combiner Combi nes GSM900 / GSM1800 / UMTS into 2 or 4 antenna ports This Multi Operator Combiner enables a maximum of 9 Radio Base Stations to connect to the combiner: 3 GSM900 Radio Base Stations 3 GSM1800 Radio Base Stations 3 UMTS Radio Base Stations The combiner combines the 9 signals to the 2 (4) antenna ports, or splits the signal to the 9 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 GSM900: Port 3 GSM900: Port 4 GSM1800: Port 5 GSM1800: Port 6 GSM1800: Port 7 UMTS: Port 8 UMTS: Port 9 UMTS:

EG 601 0014

EG 601 0015

806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

Antenna ports:

2

4

Insertion loss: Port 1 - 3 GSM900 - ANT 1 - 2 + 3 - 4: Port 4 - 6 GSM1800 - ANT 1 - 2 + 3 - 4: Port 7 - 9 UMTS - ANT 1 - 4 + 3 - 4:

< 7.0 dB < 7.0 dB < 7.0 dB

< 7.0 dB < 7.0 dB < 7.0 dB


> 20.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 20.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

60 W 50 Ohm

300 x 400 x 180 mm 7/16 (f) 22 kg

300 x 400 x 180 mm 7/16 (f) 22 kg

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%





Multi Operator Combiner 4x GSM900 / 4x GSM1800 4 Input s to 2 Antenna Port s

Multi Opertor Combiner EG 601 0031

Combines GSM900/ GSM1800 into 2 Antenna-ports. The Multi Operator Combiner allows you to connect a maximum of 2 Radio Base Stations to the Combiner. 2 GSM900 Radio Base Stations The Combiner combines the 4 signals to the 2-Antenna ports or in the receiving way splits the signal to the 2 RBS´s. The product is also available for GSM1800. This is a extremely important function when you are designing shared antenna systems and like to connect multiple RBS’s to the same antennas.


Save money by usin g our Mult i Operator Combiner. By using our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation cost. You will not need to make one antenna installation for each system, just plug your RBS´s into the combiner and it will give you the bene fit of share all antennas.



EG 601 0032

806 - 960MHz 806 - 960MHz 806 - 960MHz 806 - 960MHz

1710-1880MHz 1710-1880MHz 1710-1880MHz 1710-1880MHz

Insertionloss Port1+3 - ANT1 Port2+4 - ANT2

< 0.3 dB < 0.3 dB

< 0.3 dB < 0.3 dB

Coupling (1INPUT 2-OUT) Port1+3 - ANT1 Port2+4 - ANT2

3.0 dB +/- 0,5dB 3.0 dB +/- 0,5dB

3.0 dB +/- 0,5dB 3.0 dB +/- 0,5dB

Input return loss: Isolation between Systems: Intermodulation 2x43dBm

> 18.0 dB > 25 dB < 117 dBm (160dBc)

> 18.0 dB > 25 dB < 117 dBm (160dBc)


60 W 50 Ohm

60 W 50 Ohm

200 x 200 x 120 mm 7/16 (f) 9kg

200 x 200 x 120 mm 7/16 (f) 9kg

- 30 to + 70º C Relative 5 - 100%

- 30 to + 70º C Relative 5 - 100%

Product number: Passband Port1: Tx/Rx1 Port2: Rx2 Port3: Tx/Rx1 Port4: Rx2





Multi Operator Combiner 4 x GSM900, 4 x GSM1800 8 Input s to 2 Antenna Port s Multi Operator Combiner EG 601 0030

Save money by installing our Multi Operator Combi ner Combines GSM900 / GSM1800 into 2 antenna ports This Multi Operator Combiner enables 4 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 GSM1800 Radio Base Stations The combiner combines the 8 signals to the 2 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1 GSM900 Tx / Rx 1: Port 2 GSM900 Rx 2: Port 3 GSM900 Tx / Rx 1: Port 4 GSM900 Rx 2:

EG 601 0030

Port 5 GSM1800 Tx / Rx 1: Port 6 GSM1800 Rx 2: Port 7 GSM1800 Tx / Rx 1: Port 8 GSM1800 Rx 2:

1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz


< 1.0 dB (typ. 0.3 dB) < 1.0 dB (typ. 0.3 dB)

Coupling (1 INPUT 2 - OUT): Port 1 + 3 GSM900 - ANT 1: Port 2 + 4 GSM900 - ANT 2:

3.0 dB +/- 0.5 dB 3.0 dB +/- 0.5 dB

Port 5 + 7 GSM1800 - ANT 1: Port 6 + 8 GSM1800 - ANT 2:

3.0 dB +/- 0.5 dB 3.0 dB +/- 0.5 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz


300 x 400 x 180 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%


Egant Cellular Components Box 945 SE-114 79 Stockholm Sweden Phone:+46 (0)8 620 06 50 Fax: +46 (0)70 386 53 53 E-mail: [email protected] www.egant.se RevB


ANT2

EGANT

ANT3


Multi Operator Combiner 4 x GSM900, GSM1800, UMTS 1 x TETRA / PMR, FM 14 Inputs to 4 Antenna Ports

TETRA / PMR FM


Save money by installing o ur Multi Operator Combiner

Combi nes GSM900 / GSM1800 / UMTS / TETRA / FM into 4 antenna ports The Multi Operator Combiner enables a maximum of 14 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations 1 TETRA / PMR Radio Base Station 1 FM Radio Base Station The combiner combines the 14 signals to the 4 antenna ports, or splits the signal to the 14 RBSs in the receiving direction. This is a very important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will render you all the benefits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1 GSM900 - 1: Port 2 GSM900 - 2: Port 3 GSM900 - 3: Port 4 GSM900 - 4: Port 5 GSM1800 - 1: Port 6 GSM1800 - 2: Port 7 GSM1800 - 3: Port 8 GSM1800 - 4: Port 9 UMTS - 1: Port 10 UMTS - 2: Port 11 UMTS - 3: Port 12 UMTS - 4: Port 13 TETRA (option EG 601 0018): Port 14 FM (option EG 601 0018):

EG 601 0017 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 1710 -1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 376 - 500 MHz 88 - 108 MHz

Insertion loss: Port 1 - 4 GSM900 - ANT 1 - 4: Port 5 - 8 GSM1800 - ANT 1 - 4: Port 9 - 12 UMTS - ANT 1 - 4: Port 13 TETRA - ANT 1 - 4: Port 14 FM - ANT 1 - 4:

< 1.0 dB < 1.0 dB < 1.0 dB < 1.0 dB < 1.0 dB

Coupling (1 INPUT 4 - OUT): Port 1, 2, 5, 6, 11, 12 to ANT 1 - 4: Port 3, 7 to - ANT 3, 4: Port 3, 7 to - ANT 2 (option EG 601 0019): Port 4, 8 to - ANT 1, 2: Port 4, 8 to - ANT 3 (option EG 601 0019): Port 13 to ANT 1 - 4: Port 14 to ANT 1 - 4:



> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

Mechanical Speci fi cations Dimensions (W x H x D): Connectors port 1 - 12: Connectors port 13, 14: Weight:

300 x 800 x 180 mm 7/16 (f) N (f) 28 kg


-30 to +70º C Relative 5 - 100%




ANT3

ANT2

ANT4

Multi Operator Combiner 6 x GSM900, 2 x GSM1800 8 Port s In - 4 Ports Out

0 0 0 9 0 0 0 0 9 0 S 0 0 0 M 9 T 9 M S M 9 0 S M G S M M 9 G U S G G S M G S G

0 0 S 0 0 T 8 8 1 1 M M M U S S G G

Save money by installing o ur Multi Operator Combiner Combin es 8 RBSs into 4 antenna por ts This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner: 6 GSM900 Radio Base Stations 2 GSM1800 Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.






< 10.0 dB < 7.0 dB

Input return loss: Isolation between systems: Isolation between same systems:

> 18.0 dB > 50 dB > 25 dB


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%



EGANT ANT1

CELLULAR COMPONENTS

ANT2


0 0 0 0 9 0 0 0 9 9 0 M 9 S M M S S M G G G S G

S T S S S T T M T U M M M U U U

Save money by installing our Multi Operator Combiner Combin es 8 RBSs into 4 antenna por ts This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 8 signals to the 2 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.





< 7.0 dB < 7.0 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%




ANT1

ANT2


0 0 9 M S G

0 0 9 M S G

S T M U

S T M U

Combines 8 RBSs int o 4 antenna port s This Multi Operator Combiner enables 4 Radio Base Stations to connect to the combiner: 2 GSM900 Radio Base Stations 2 UMTS Radio Base Stations The combiner combines the 4 signals to the 2 antenna ports, or splits the signal to the 4 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by inst alling our Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.



EG 601 0025

Port 3 UMTS: Port 4 UMTS:

1920 - 2170 MHz 1920 - 2170 MHz


< 4.0 dB (typ 3.3 dB) < 4.0 dB (typ 3.4 dB)


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

806 - 960 MHz 806 - 960 MHz


300 x 400 x 120 mm 7/16 (f) 9 kg


-30 to +70º C Relative 5 - 100%




ANT1

Multi Operator Combiner 2 x GSM900, 1 x UMTS 3 Input s to 1 Ant enna Port

0 0 9 M S G

0 0 9 M S G

S T M U

Combines 3 RBSs into 1 antenna port This Multi Operator Combiner enables 3 Radio Base Stations to connect to the combiner: 2 GSM900 Radio Base Stations 1 UMTS Radio Base Station The combiner combines the 3 signals to the antenna port, or splits the signal to the 3 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 GSM900: Port 3 UMTS:

EG 601 0026 806 - 960 MHz 806 - 960 MHz 1920 - 2170 MHz

Insertion loss: Port 1 - 2 GSM900 - ANT 1: Port 3 UMTS - ANT 1:

< 3.5 dB (typ 3.3 dB) < 0.3 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 5 kg


-30 to +70º C Relative 5 - 100%



ANT1

ANT3


ANT2


0 0 0 0 0 9 9 0 M M 9 S S M G G S G

S T M U

S S T T M M U U




Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 GSM900: Port 3 GSM900: Port 4 UMTS: Port 5 UMTS: Port 6 UMTS:



< 7.0 dB < 7.0 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 13 kg


-30 to +70º C Relative 5 - 100%



EGANT ANT1

CELLULAR COMPONENTS

Multi Operator Combiner 2 x GSM900, 1 x GSM1800 1 x UMTS 4 Inputs t o 1 Antenna Port

0 0 9 M S G

0 0 9 M S G

S T M U

0 0 8 1 M S G

Combines 4 RBSs into 1 antenna port This Multi Operator Combiner enables 4 Radio Base Stations to connect to the combiner: 2 GSM900 Radio Base Stations 1 GSM1800 Radio Base Station 1 UMTS Radio Base Station The combiner combines the 4 signals to the antenna port, or splits the signal to the 4 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 GSM900: Port 3 GSM1800: Port 4 UMTS:

EG 601 0028 806 - 960 MHz 806 - 960 MHz 1710 -1880 MHz 1920 - 2170 MHz

Insertion loss: Port 1 - 2 GSM900 - ANT 1: Port 3 GSM1800 - ANT 1: Port4 UMTS - ANT 1:

< 3.5 dB (typ 3.3 dB) < 0.3 dB < 0.5 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 7 kg


-30 to +70º C Relative 5 - 100%




A N T

Multi Operator Combiner 3 x GSM1800, 3 x UMTS 6 Inputs t o 1 Antenna Port

G S M G 1 8 S 0 M G 0 1 S 8 M 0 0 1 8 0 0

U M T U S M T S

U M T S

Combines 6 RBSs into 1 antenna port This Multi Operator Combiner enables 6 Radio Base Stations to connect to the combiner: 3 GSM1800 Radio Base Stations 3 UMTS Radio Base Stations The combiner combines the 6 signals to the antenna port, or splits the signal to the 6 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1: GSM1800 Port 2: GSM1800 Port 3: GSM1800 Port 4: UMTS Port 5: UMTS Port 6: UMTS


Insertion loss: Port 1 - 3: GSM1800 - ANT Port 4 - 6: UMTS - ANT

< 5.8 dB < 5.8 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


350 x 500 x 220 mm 7/16 (f) 14 kg


-30 to +70º C Relative 5 - 100%




Multi Operator Combiner 4 x CDMA800/GSM900 5 x GSM1800 5 x UMTS 1 x WiFi 4 x Antenna Port s 4 x Monitor Ports

Combin es up to 15 RBSs into 4 antenna ports This Multi Operator Combiner enables up to 15 Radio Base Stations to connect to the combiner: 4 CDMA800/GSM900 Radio Base Stations 5 GSM1800 Radio Base Stations 5 UMTS Radio Base Stations 1 WiFi Radio Base Station The combiner combines the signals to the 4 antenna ports, or splits the signal to the 15 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.


Monitoring ports This product comes equipped with four -30 dB monitoring ports (N(f)).



EG 601 0078

1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 2400-2500MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 2400-2500MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

Insertion loss: Port 1: GSM1800 - ANT 1 - 4 Port 2 - 5: GSM1800 - ANT 1 - 4 Port 6: CDMA/GSM900 - ANT 1 - 4 Port 7 - 9: CDMA/GSM900 - ANT 1 - 4 Port 10 WiFi - Ant 1 - 4 Port 11: UMTS - ANT 1 - 4 Port 12 - 15: UMTS - ANT 1 - 4

< 1.7 dB < 1.2 dB < 1.7 dB < 1.2 dB < 1.2 dB < 1.7 dB < 1.2 dB

< 1.7 dB < 1.2 dB < 1.7 dB < 1.2 dB < 1.2 dB < 1.7 dB < 1.2 dB

Coupling: Port 1 - 3: GSM1800 - ANT 1 - 4 Port 4 - 5: GSM1800 - ANT 1 - 4 Port 6 - 8: CDMA800 - ANT 1 - 4 Port 9: CDMA800 - ANT 1 - 4 Port 10 WiFi - Ant 1 - 4 Port 11 - 13: UMTS - ANT 1 - 4 Port 14 - 15: UMTS - ANT 1 - 4




> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

60 W 50 Ohm

450 x 250 x 500 mm 7/16 (f) N(f) N(f) 30.5 kg

450 x 250 x 500 mm N (f) N(f) N(f) 30..5 kg

Product number: Passband: Port 1: GSM1800 Port 2: GSM1800 Port 3: GSM1800 Port 4: GSM1800 Port 5: GSM1800 Port 6: CDMA800/GSM900 Port 7: CDMA800/GSM900 Port 8: CDMA800/GSM900 Port 9: CDMA800/GSM900 Port 10: WiFi Port 11: UMTS Port 12: UMTS Port 13: UMTS Port 14: UMTS Port 15: UMTS

Mechanical Speci fi cations Dimensions (W x H x D): Input connectors: Output connectors: Monitoring ports (-30 dB) Weight:



A N T

G S M G 1 8 S 0 M G 0 1 S 8 M 0 0 1 8 0 0

A N T

Multi Operator Combiner 3 x GSM1800, 3 x UMTS 6 Input s to 2 Antenna Port s

U M T U S M T S

U M T S




Electrical Speci fi cations Product number: Passband: Port 1: GSM1800 Port 2: GSM1800 Port 3: GSM1800 Port 4: UMTS Port 5: UMTS Port 6: UMTS


Insertion loss: Port 1 - 3: GSM1800 - ANT 1 - 2 Port 4 - 6: UMTS - ANT 1 - 2

< 7.0 dB < 7.0 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


350 x 500 x 220 mm 7/16 (f) 14 kg


-30 to +70º C Relative 5 - 100%



EGANT ANT1

ANT3

CELLULAR COMPONENTS

ANT2

Multi Operator Combiner 3 x GSM1800, 3xUMTS 6 Input s to 3 Antenna Port s

0 0 0 0 0 S S 8 8 0 T T S T 1 1 8 M 1 U M M M M U U S S M G G S G







< 6.3 dB < 6.3 dB


> 17.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 13 kg


-30 to +70º C Relative 5 - 100%




A N T

Multi Operator Combiner 4 x GSM1800, 4 x UMTS 8 Inputs t o 1 Antenna Port

0 0 0 0 0 S 8 0 0 0 T S S 1 8 T T S 1 8 M 1 8 T 1 M M U M M M U M S U U S S M G G G S G

Combines 8 RBSs into 1 antenna port This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner: 4 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 8 signals to the antenna port, or splits the signal to the 8 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1: GSM1800 Port 2: GSM1800 Port 3: GSM1800 Port 4: GSM1800 Port 5: UMTS Port 6: UMTS Port 7: UMTS Port 8: UMTS


Insertion loss: Port 1 - 3: GSM1800 - ANT Port 4 - 6: UMTS - ANT

< 1,0 dB < 1,0 dB

Coupling: Port 1 - 4: GSM1800 - ANT Port 5 - 8: UMTS - ANT

6,0dB +/- 0.5dB 6.0dB +/- 0.5dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


150 W 50 Ohm


350 x 500 x 220 mm 7/16 (f) 24 kg


-30 to +70º C Relative 5 - 100%



EGANT ANT1

ANT3

ANT2

CELLULAR COMPONENTS

ANT4


0 0 0 0 8 0 0 0 1 8 8 0 1 M 1 8 S M M 1 G S S M G G S G


Save money by installing ou r Multi Operator Combiner

Combines 8 RBSs int o 4 antenna port s This multi operator combiner enables 8 Radio Base Stations to connect to the combiner: 4 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.





Insertion loss: Port 1 - 4 GSM 1800 - ANT 1 - 4: Port 5 - 8 UMTS - ANT 1 - 4:

< 1.0 dB < 1.0 dB

Coupling (1 INPUT - 4 OUT): Port 1 - 4 GSM 1800 - ANT 1 - 4: Port 5 - 8 UMTS - ANT 1 - 4:

6.0 dB +/- 0.5 dB 6.0 dB +/- 0.5 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 180 mm 7/16 (f) 22 kg


-30 to +70º C Relative 5 - 100%




ANT1 ANT3

ANT2

0 0 0 0 9 0 0 0 9 0 M 9 9 M S S M G G S M G S G

ANT4

0 0 0 S 8 0 0 T 1 8 0 1 8 M 1 M M U S S M G G S G

Combines 8 RBSs int o 4 antenna port s This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 1800 Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly im portant function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Multi Operator Combiner 4 x GSM900, GSM1800 8 Input s to 4 Antenna Port s

Save money by installing our Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefits of antenna sharing.





< 7.0 dB < 7.0 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%



EGANT ANT1

ANT3

ANT2

CELLULAR COMPONENTS

ANT4


0 0 0 0 9 0 0 0 9 9 0 M 9 S M M S S M G G G S G


Save money by installing o ur Multi Operator Combiner Combines 8 RBSs int o 4 antenna port s This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner: 4 GSM900 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction.This is a highly im portant function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation.It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.





< 7.0 dB < 7.0 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%



EGANT ANT1

ANT3

ANT2

CELLULAR COMPONENTS

ANT4


0 0 0 0 8 0 0 0 1 8 8 0 1 M 1 8 S M M 1 G S S M G G S G


Save money by installing ou r Multi Operator Combiner

Combines 8 RBSs int o 4 antenna port s This multi operator combiner enables 8 Radio Base Stations to connect to the combiner: 4 GSM1800 Radio Base Stations 4 UMTS Radio Base Stations The combiner combines the 8 signals to the 4 antenna ports, or splits the signal to the 8 RBSs in the receiving direction. This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.




EG 601 0046

EG 601 0047




Insertion loss: Port 1 - 4: GSM900 - ANT 1 - 4 Port 5 - 8 (1 - 4): GSM1800 - ANT 1 - 4 Port 9 - 12 (5 - 8): UMTS - ANT 1 - 4

< 1.2 dB < 1.2 dB < 1.2 dB

< 1.2 dB < 1.2 dB < 1.2 dB

< 1.2 dB < 1.2 dB < 1.2 dB

Coupling: (1 IN - 4 OUT) Port 1 - 4: GSM900 - ANT 1 - 4 Port 5 - 8 (1 - 4): GSM1800 - ANT 1 - 4 Port 9 - 12 (5 - 8): UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

60 W 50 Ohm

60 W 50 Ohm

450 x 250 x 500 mm N (f) SMA (f) 24 kg

450 x 250 x 500 mm N (f) SMA (f) 21 kg

450 x 250 x 500 mm N (f)

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%

Product number: Passband: Port 1: GSM900 Port 2: GSM900 Port 3: GSM900 Port 4: GSM900 Port 5 (1): GSM1800 Port 6 (2): GSM1800 Port 7 (3): GSM1800 Port 8 (4): GSM1800 Port 9 (5): UMTS Port 10 (6): UMTS Port 11 (7): UMTS Port 12 (8): UMTS

Mechanical Speci fi cations Dimensions (W x H x D): Connectors: Monitoring ports (-30 dB): Weight:

18 kg




Multi Operator Combiner 5 x GSM1800, 5 x UMTS 4 Ant enna Port s

Combin es up to 10 RBSs into 4 antenna ports This Multi Operator Combiner enables up to 10 Radio Base Stations to connect to the combiner: 5 GSM1800 Radio Base Stations 5 UMTS Radio Base Stations The combiner combines the signals to the 4 antenna ports, or splits the signal to the 10 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1 : GSM1800 Port 2: GSM1800 Port 3: GSM1800 Port 4: GSM1800 Port 5: GSM1800 Port 6: UMTS Port 7: UMTS Port 8: UMTS Port 9: UMTS Port 10: UMTS

EG 601 0054 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

Insertion loss: Port 1 - 5: GSM1800 - ANT 1 - 4 Port 6 - 10: UMTS - ANT 1 - 4

< 1.2 dB < 1.2 dB

Coupling: Port 1 - 3: GSM1800 - ANT 1 - 4 Port 4 - 5: GSM1800 - ANT 1 - 4 Port 6 - 8: UMTS - ANT 1 - 4 Port 9 - 10: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB 9.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 9.0 dB +/- 0.6 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


450 x 250 x 500 mm N (f) 26 kg


-30 to +70º C Relative 5 - 100%



ANT1

ANT3


ANT2


0 0 0 0 0 9 9 0 M M 9 S S M G G S G

S T M U

S S T T M M U U







< 7.0 dB < 7.0 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 13 kg


-30 to +70º C Relative 5 - 100%




ANT2

ANT3

ANT4

Multi Operator Combiner 6 x GSM900, 6 x UMTS 12 Ports In - 4 Port s Out

0 0 0 0 9 0 9 0 0 0 0 0 M M 9 9 0 S S S 9 T 0 S T T S S 9 S M M G S M M M M T T S G G S S U T M U U M M G G S M U U U G

Save money by inst alling our Multi Operator Combiner Combin es 12 RBSs into 4 antenna port s This Multi Operator Combiner enables 12 Radio Base Stations to connect to the combiner: 6 GSM900 Radio Base Stations 6 UMTS Radio Base Stations The combiner combines the 12 signals to the 4 antenna ports, or splits the signal to the 12 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inef ficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the benefits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port1 GSM900: Port2 GSM900: Port3 GSM900: Port4 GSM900: Port5 GSM900: Port6 GSM900: Port7 UMTS: Port8 UMTS: Port9 UMTS: Port10 UMTS: Port11 UMTS: Port12 UMTS:


Insertion loss: Port 1 - 4 GSM900 - ANT 1 - 4: Port 5 - 6 GSM900 - ANT 1 - 4: Port 7 - 10 UMTS - ANT 1 - 4: Port 11 - 12 UMTS - ANT 1 - 4:

< 10.0 dB (typ. 9.5 dB) < 7.0 dB, (typ. 6.5 dB) < 10.0 dB (typ. 9.5 dB) < 7.0 dB (typ. 6.5 dB)

Input return loss: Isolation between systems: Isolation between same systems: Intermodulation 2 x 43

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 180 mm 7/16 (f) 22 kg


-30 to +70º C Relative 5 - 100%



EGANT

ANT1

CELLULAR COMPONENTS

ANT2


0 0 0 0 8 8 1 1 M M S S G G

S T M U

S S T T M M U U





EG 601 0029

Port 3 UMTS: Port 4 UMTS:

1920 - 2170 MHz 1920 - 2170 MHz


< 4.0 dB (typ 3.5 dB) < 4.0 dB (typ 3.5 dB)


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

1710 - 1880 MHz 1710 - 1880 MHz


300 x 400 x 120 mm 7/16 (f) 11 kg


-30 to +70º C Relative 5 - 100%



EGANT CELLULAR COMPONENTS ANT

Multi Operator Combiner 3 x UMTS, 1 x GSM900 4 Input s to 1 Ant enna Port

0 0 9

S T S S S T T M T S M M M U G U U M U

Combines 4 RBSs into 1 antenna port This Multi Operator Combiner enables 4 Radio Base Stations to connect to the combiner: 1 GSM900 Radio Base Station 3 UMTS Radio Base Stations The combiner combines the 4 signals to the 1 antenna port, or splits the signal to the 4 RBSs in the receiving direction. This is a highly im portant function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Save money by installing o ur Multi Operator Combiner By utilizing our Multi Operator Combiner you will reduce the cost of antennas, feeders and installation. It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the combiner it will immediately render you all the bene fits of antenna sharing.


Electrical Speci fi cations Product number: Passband: Port 1 GSM900: Port 2 UMTS: Port 3 UMTS: Port 4 UMTS:

EG 601 0041 880 - 960 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz

Insertion loss: Port 1 GSM900 - ANT 1: Port 2 - 4 UMTS - ANT1:

< 0.2 dB < 5.5 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


300 x 400 x 120 mm 7/16 (f) 15 kg


-30 to +70º C Relative 5 - 100%




Multi Operator Combiner 2 xCDMA800/GSM900, 4 x GSM1800, 4 x UMTS 4 Ant enna Port s





EG 601 0074

EG 601 0075

806 - 960 MHz 806 - 960 MHz

806 - 960 MHz 806 - 960 MHz





< 1.2 dB < 1.2 dB < 1.2 dB

< 1.2 dB < 1.2 dB < 1.2 dB


6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

60 W 50 Ohm

450 x 250 x 500 mm 7/16 (f) N(f) 19 kg

450 x 250 x 500 mm N (f) N(f) 19 kg

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%





Multi Operator Combiner 2 x CDMA800/GSM900, 5 x GSM1800, 5 x UMTS 4 Ant enna Port s

Combin es up to 12 RBSs into 4 antenna ports This Multi Operator Combiners enables up to 12 Radio Base Stations to connect to the com biner: 2 CDMA800/GSM900 Radio Base Stations 5 GSM1800 Radio Base Stations 5 UMTS Radio Base Stations The combiner combines the signals to the 4 antenna ports, or splits the signal to the 12 RBSs in the receiving direction. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.



Electrical Speci fi cations Product number: Passband: Port 1: GSM1800 Port 2: GSM1800 Port 3: GSM1800 Port 4: GSM1800 Port 5: GSM1800 Port 6: CDMA800 Port 7: CDMA800 Port 8: UMTS Port 9: UMTS Port 10: UMTS Port 11: UMTS Port 12: UMTS


Insertion loss: Port 1 - 5: GSM1800 - ANT 1 - 4 Port 6 - 7: CDMA800 - ANT 1 - 4 Port 8 - 12: UMTS - ANT 1 - 4

< 1.2 dB < 1.2 dB < 1.2 dB

Coupling: Port 1 - 3: GSM1800 - ANT 1 - 4 Port 4 - 5: GSM1800 - ANT 1 - 4 Port 6 - 7: CDMA800 - ANT 1 - 4 Port 8 - 10: UMTS - ANT 1 - 4 Port 11 - 12: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB 9.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 6.0 dB +/- 0.6 dB 9.0 dB +/- 0.6 dB


> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm


450 x 250 x 500 mm N (f) 28 kg


-30 to +70º C Relative 5 - 100%




Multi Operator Combiner 4 x CDMA800/GSM900 5 x GSM1800 5 x UMTS 4 x Antenna Port s





EG 601 0073

EG 601 0082

1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 1710 - 1880 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 806 - 960 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz 1920 - 2170 MHz



Insertion loss: Port 1 - 5: GSM1800 - ANT 1 - 4 Port 6 - 9: CDMA/GSM900 - ANT 1 - 4 Port 10 - 14: UMTS - ANT 1 - 4

< 1.2 dB < 1.2 dB < 1.2 dB

< 1.2 dB < 1.2 dB < 1.2 dB

< 1.2 dB < 1.2 dB < 1.2 dB

Coupling: Port 1 - 3: GSM1800 - ANT 1 - 4 Port 4: GSM1800 - ANT 1 - 4 Port 5: GSM1800 - ANT 1 - 4 Port 6 - 8: CDMA800 - ANT 1 - 4 Port 9: CDMA800 - ANT 1 - 4 Port 10 - 12: UMTS - ANT 1 - 4 Port 13 - 14: UMTS - ANT 1 - 4





> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)

> 18.0 dB > 50 dB > 25 dB < 117 dBm (160 dBc)


60 W 50 Ohm

60 W 50 Ohm

60 W 50 Ohm

450 x 250 x 500 mm 7/16 (f) N(f)

450 x 250 x 500 mm N (f) N(f)

28 kg

28 kg

450 x 250 x 500 mm 7/16(f) N(f) N(f) 28 kg

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%

-30 to +70º C Relative 5 - 100%

Product number: Passband: Port 1: GSM1800 Port 2: GSM1800 Port 3: GSM1800 Port 4: GSM1800 Port 5: GSM1800 Port 6: CDMA800/GSM900 Port 7: CDMA800/GSM900 Port 8: CDMA800/GSM900 Port 9: CDMA800/GSM900 Port 10: UMTS Port 11: UMTS Port 12: UMTS Port 13: UMTS Port 14: UMTS

Mechanical Speci fi cations Dimensions (W x H x D): Input connectors: Antenna connectors: Monitoring ports (-30dB) Weight:




Multi Operator Combiner 4 x CDMA800/GSM900, 5 x GSM1800, 5 x UMTS 4 x Antenna Port s 4 x Monitor Ports



Monitoring ports This product comes equipped with four -30 dB monitoring ports (SMA).

EGANT Multi Operator Combiners

Recommend Documents