XCAL-Auto Mobile_User Guide v4 7 Xx (Rev0)_140305_F_APAC_RJIL

XCAL-Auto Mobile (For RJIL)

User Guide Doc Rev: 00 Product Version: 4.7.xx 2014. 03

XCAL-Auto Mobile User Guide Ⓒ 2014 Accuver APAC Ltd., All rights reserved. This documentation shall not be changed, distributed to the public, and opened to the third person without written permission. Accuver is not responsible for any direct or indirect damages arisen or related to use of this manual. All information included herein may be changed without prior notice.

‘

Accuver APAC Ltd., Unit 206, 2/F., No. 8 Science Park West Avenue, Hong Kong Science Park, Shatin, NT, HONG KONG Tel : +852-2210-7004 Fax : +852-2210-7017 http://www.accuver.com © Copyright by Accuver APAC Ltd.

Page ２

XCAL-Auto Mobile User Guide

Contents

Contents

Master Device Configuration ............................................22 Slave Device Configuration ..............................................23 Destination Configuration .....................................................25 SCFT Station Measurement Configuration ...............................27

Contents ............................................................................................... ３ Overview ............................................................................................... 6 Special Features ................................................................... 7 Specification......................................................................... 7 Getting Started...................................................................................... 8 Connecting PC and Smart Phone ............................................. 9 Installing File Explorer Application (ES File Explorer) ............... 10 Transferring XCAL-Auto Mobile Program File ........................... 11 Starting XCAL-Auto Mobile ................................................................. 13 Switching XCAL-Auto Mobile ................................................. 15 Graphic User Interface ......................................................... 16 XCAL-Mobile ................................................................. 16 XCAL-Auto Mobile .......................................................... 17 Status Icon Bar .................................................................. 18 XCAL-Auto Mobile Menu ................................................. 19 Map ....................................................................... 19 RTP Info ................................................................. 20 Signaling Message ................................................... 21 Master/Slave Configuration .................................................. 22 © Copyright by Accuver APAC Ltd.

SCFT Moving Measurement Configuration ...............................30 Moving Master/Slave Scenario Configuration ...........................32 Cluster Measurement Configuration .......................................34 Cluster Master/Slave Scenario Configuration ...........................36 Upload after Measurement ....................................................38 Log Manager Setting ............................................................40 Terminating XCAL-Auto Mobile ........................................................... 41 RF Information (Qualcomm Chipset).................................................. 43 Summary List of RF Information ............................................45 Android RF..........................................................................46 Signal Messages ..................................................................46 LTE Summary .....................................................................47 LTE Signal ..........................................................................47 LTE Cell ..............................................................................48 RTP Info .............................................................................48 Configuring Logmask .......................................................................... 49 Configuring Logmask Setting ................................................50 Performing AutoCall Test .................................................................... 51 Page ３


Creating AutoCall Scenario (For Single Call Test) .................... 52

Other Settings - Naming Log File .....................................91

Creating AutoCall Scenario (For Multiple Call Test) .................. 54

Other Settings - CSV Delimiter ........................................92

AutoCall Test for Sequential Multiple Calls (Multi-Call) ........ 55

Other Settings – Network (RAT/Band) Lock (DM) ...............93

Importing AutoCall Scenario ................................................. 57

Other Settings - RAT & Band Lock (Hidden) .......................94

Starting AutoCall Test (In Classic tab) ................................... 58

Other Settings - External GPS..........................................95

Starting AutoCall Test (In All Scenarios tab) ........................... 60

Other Settings – TTS Alarm .............................................96

Terminating AutoCall Test .................................................... 62

Other Settings – Split log file ...........................................97

Monitoring in Digital Map.................................................................... 63

Master/Slave Test ............................................................................... 98

Displaying Data in Digital Map .............................................. 64

Configuring Master or Slave Mobile ........................................99

Configuring Map Options ...................................................... 65

Starting M/S Test .............................................................. 102

Configuring Map Options – Parameters ............................. 66

Inbuilding Test of Master/Slave Mobiles ................................ 103

Configuring Map Options – Settings ................................. 67

Inbuilding Test .................................................................................. 104

Importing BTS/Repeater Data ......................................... 68

Configuring Inbuilding Test ................................................. 105

Call Result History ............................................................................... 73

Starting Inbuilding Test ...................................................... 108

Uploading Log File ............................................................................... 75

Moving Point Test......................................................... 109

Uploading Setting ............................................................... 79

Fixed Point Test ........................................................... 115

Additional Function ............................................................................. 80

Configuring Inbuilding Options ............................................ 117

Manual Logging .................................................................. 81

Configuring Inbuilding Options – Parameters ................... 118

Replay ............................................................................... 83

Terminating XCAL-Mobile ................................................................. 119

Screen Capture ................................................................... 85

Troubleshooting ................................................................................ 121

About ................................................................................ 86

Related Products ............................................................................... 123

Other Settings .................................................................... 88

Appendix: Configuring AutoCall Scenario ......................................... 124

© Copyright by Accuver APAC Ltd.

Page ４


Time Configuration (Voice, Web, Ping, VoLTE) ...................... 125 Time Configuration (FTP) ................................................... 126 Configuration for Each Call Type ......................................... 127 Voice ......................................................................... 127 FTP ............................................................................ 127 Web........................................................................... 128 Ping ........................................................................... 128 VoLTE ........................................................................ 128 Multi Call .................................................................... 129 Appendix: Call Events ....................................................................... 130 Voice ............................................................................... 131 FTP ................................................................................. 131 Web ................................................................................ 131 Ping ................................................................................ 132 VoLTE .............................................................................. 132 Appendix: Parameter Description ..................................................... 133 LTE ................................................................................. 134 Appendix: RTP Analysis in VoLTE ...................................................... 135


Page ５


O

Overveiw

verview

XCAL-Auto Mobile is a test application which can be connected & used with FMS (Fleet Management System) server. XCAL-Auto Mobile can be controlled, configured and monitored in real time basis from FMS server.

XCAL-Auto Mobile operates together with the XCAL-Mobile. XCAL-Mobile, which is an Android based stand-alone application runs on Android smart phones that enables QoS and QoE testing across all WCDMA, GSM, and LTE technologies. XCAL-Mobile application on smart phone in Android OS supports extensive application testing and delivers real-time network measurement and visualization. XCAL-Mobile is provided for both indoor and outdoor measurement while it is also available for field drive test when it is installed inside of a moving vehicle. It supports remote control function by connecting with other server solution series of Accuver. All features can be controlled by using normal handset keys.


Page 6


Getting Started

Special Features Generates and automatically.

Specification

terminates

voice

and

data

calls Technology: LTE Qualcomm

Creates and edits measurement scenarios in portable smart phone. Performs voice and data call measurement simultaneously. Monitors statistics in real-time in message, graph, table, and map. Provides multiple types of call events and parameters for technologies.

Terminal: Android smart phone OS up to Jelly Bean (v4.1) Recommended RAM memory: 812 MB Call Type: Voice, FTP, Web, Ping, VoLTE, Multi Call RF Parameter: Android RF Info, LTE Summary, LTE Signal, LTE Cell

Shows monitoring data in mobile window as the logging file is provided in *.drm(drx) and *.csv format. Supports both indoor and outdoor measurement. Supports Replay mode. Exports logging automatically.

file

to

server

both

manually

and

Reports errors of the program via e-mail automatically.


Page 7


G

Getting Started

etting Started

This chapter describes how to install XCAL-Auto Mobile application in smart phone: How to Connect a PC to an Android-OS smart phone. How to install a file explorer application in Android-OS. How to copy XCAL-Auto Mobile program (*.apk) to Android-OS smart phone.


Page 8


Getting Started

Connecting PC and Smart Phone In order to install XCAL-Auto Mobile application on your smart phone, you first need to connect your smart phone and PC by phone cable.

1. Connect PC and an Android-OS smart phone by phone cable.


2. Swipe down from the top of smart phone screen to open notification center.

3. Tap USB connected.

4. Tap Turn on USB storage button. 5. PC and Android-OS smart phone is connected successfully.

Page 9


Getting Started

Installing File Explorer Application (ES File Explorer) ES File Explorer application helps you to navigate through your smart phone.

1. Tap Market icon on your smart phone to open Android Market.


2. Android Market main screen appears. Tap Search icon.

3. Search for ES File Explorer.

4. Download and install the ES File Explorer application on your smart phone. ES File Explorer application is successfully installed.

Page 10


Getting Started

Transferring XCAL-Auto Mobile Program File You need to copy and paste XCAL-Auto Mobile application file in *.apk format onto your smart phone.

1. In PC, open driver of smart phone.

2. Create a new folder.

3. Copy and paste XCAL-Auto Mobile program file (*.apk) into the new folder.

4. In smart phone, tap ES File Explorer icon to execute.

XCAL-Auto Mobile program file (*.apk) is provided upon purchase.


Page 11


1. Tap the new folder which was created via PC.

Getting Started

2. Tap XCAL-Auto Mobile program file (*.apk) to execute.

3. Tap Install button.

4. XCAL-Auto Mobile application is successfully downloaded and installed.

Make sure that there is enough hard disc capacity in the smart phone. XCAL-Auto Mobile program file (*.apk) is approx. 10 MB.


Page 12


S

Starting XCAL-Auto Mobile

tarting XCAL-Auto Mobile

By now, you have completed all necessary steps before starting and are ready to use XCAL-Auto Mobile application on your smart phone.

Before you start XCAL-Auto Mobile, make sure Settings – Date and time - Auto (Use network-provided values) is checked. Internet access is available (WiFi, 3G or 4G).


Page 13


Prior to using XCALMobile, you should get a valid SW License Key. You may request Accuver sales representative for valid Key by sending your IMSI, IMEI or MAC address information of device.


1. Tap Check Box of valid Key and License Download button.

2. License Download Screen appears.

3. Main screen of XCALMobile appears.

MAC address will not be shown when internet access (WiFi or 3G or 4G) is unavailable.


Page 14



Switching XCAL-Auto Mobile

1. Execute Change XCALAuto Mobile by clicking menu button.


2. The above screen appears.

Page 15



Graphic User Interface XCAL-Mobile XCAL-Mobile’s intuitive and user-friendly user interface helps your measurement projects.

XCAL-Mobile version Taps Classic or All Scenario tab. XCAL-Mobile version Swipes left and right to select call type. Taps combo box to select Auto Call scenario. Taps combo box to select Auto Call scenario. Shows Scenario details. Starts AutoCall. AutoCall Setting, Call History, Other Setting, Log Upload, Logmask Setting For detail, see Configuring AutoCall Scenario, Call Result History, Uploading Log File, Additional Function Shows data and serving lines in Google AutoCall Setting, Call History, Othermap. Setting, Log Upload, Logmask Setting For detail of call result, see Monitoring in Digital Map.Call Result History, Uploading Log For detail, see Configuring AutoCall Scenario,

File, Additional Function

Shows data and serving lines in Google map. Shows RFofinformation of Monitoring smart phone real-time. For detail call result, see in in Digital Map.

For detail of RF information, see RF Information

Select and start of AutoCall scenario. Showscall RFtype information smart based phoneonincall real-time. For detail of AutoCall test, see AutoCall Test. For detail of RF information, see RF Information Select call type and start AutoCall based on call scenario. For detail of AutoCall test, see AutoCall Test.


Page 16



XCAL-Auto Mobile XCAL-Auto Mobile’s intuitive and user-friendly user interface helps your measurement projects. RTU ID

XCAL-Auto Mobile version Shows Log upload file list. Shows RTU Information For detail, see LTE Summary View. Shows Status/Parameters For detail, see LTE Cell Measurement. Shows Parameters For detail, see LTE Signal View.

Shows Test Scenario details. Starts AutoCall.

Display Map Master/Slave Setting

Starts Idle logging.

Shows RTP Information Change to XCAL-Mobile

XCAL-Auto Mobile Main Window Shows Signaling Message This window is displayed when the user clicks menu button of phone. XCAL-Auto Mobile Menu


Page 17



Status Icon Bar Status Icon Bar is placed at the upper right corner of XCAL-Auto Mobile/XCAL-Mobile screen. Icon

Icon Name AutoCall

Description

Green: AutoCall test is in progress without any problem. Red: AutoCall test is stopped abnormally during running. Gray: AutoCall test is not in progress.

Logging File

Green: Measurement data is properly saving in logging file. Red: Measurement data is stopped saving abnormally in logging file. Gray: Measurement data is not saving in logging file.

DM Data Collection GPS Status

/

Green On: DM data is being collected from modem. Red: DM data is not being collected from modem. : Network GPS is enabled. When it is turned to black, Network GPS is not enabled properly. : GPS information from GPS inside the smart is being collected without any problem. When it is blinking, there is issues with GPS

Master

Master/Slave is working.

/ Slave

The number of small boxes in the icon stand for number of Slave mobiles connected to Master mobile. For details, see Master/Slave Test.

IP Frame

Red: IP Frame function is working. When it is in black, IP Frame function is not enabled. For details, see Other Settings.


Page 18



XCAL-Auto Mobile Menu Map XCAL-Auto Mobile enables you to change map setting in Google map. To open Map Options, tap Menu button on smart phone hardware. Items

BTS On/Off Legend On/Off

Description

Shows/Hides BTS in map. Shows/Hides legend in map.

Route On/Off

Shows/Hides Route in map.

Parameter

Selects parameters of technologies to display in map. Parameter Common : App. DL Thp, APP. UL Thp, Network Type LTE : RSSI, RSRP, RSRQ, SINR


Page 19



RTP Info RTP Info screen shows Rx Packet Loss Rate, Rx RTP Throughput, Rx Inter Arrival Packet Delay, Rx Inter Arrival Packet Jitter, One Way Delay, Rx/Tx RTP Packet Count, and Round Trip Time

Rx Packet Loss Rate

RTT

Rx RTP Throughput

One Way Delay

Rx Inter Arrival Packet Delay

Counterpart UE

Rx Inter Arrival Packet Jitter One Way Delay Rx RTP Packet Count Tx RTP Packet Count

Interarrival Jitter Lost Packet Num Measuring UE Interarrival Jitter Lost Packet Num

R-Factor


Page 20



Signaling Message Signaling Messages screen shows RRC messages of LTE technology.

LTE RRC Messages

Tap

a

message

from

Signaling Message list, and Corresponding code is shown


Page 21



Master/Slave Configuration Master Device Configuration

1. Click M/S.


2. Click Master when the above screen is displayed.

3. The device is registered as above.

Page 22



Slave Device Configuration

1. Click M/S.


2. Click Slave when the above screen is displayed.

3. Click the device willing to designate as Master. (If this device is registered before, the user directly check the RTU ID.)

Page 23



If the Master device is not registered, execute the next level as below

1. Click Settings –Bluetooth. (Execute Master and Slave device both.)


2. Check My device in Master device. In Slave device, search and click the device in Available devices. And the Bluetooth request window will pop-up.

3. Go back to M/S setting window and click

4. Check the device list. .

Page 24



Destination Configuration

1. Get GPS data clicking .


2. Find desired test location and click long.

3. In Select a destination window, click OK. If change location, click Cancel.

4. The OK is clicked in previous step, the above window is displayed. If use Google Map navigation function, click OK. If not, click Cancel.

Page 25


Google Map Navigation Example.



5. Click

6. Download site list inside of Cluster clicking RCP in above screen.

Page 26



SCFT Station Measurement Configuration

..

1. Click

.


2. Configure Select Type, Test Type, Site, Cycle in above screen.

3. Configure Select Type.

4. Configure Test type.

Page 27


5. Configure Site.



6. Configure Cycle. When complete, click Save button.

7. The above screen is displayed when setting is completed. Click Start button.

8. Autocall test is started and the above screen is displayed.

Page 28


9. After test, the next station test asking window pops up. If yes, click OK. If no, click Cancel.


10. When clicks OK, the next station will be set as above.

(After Station6 Test, which is the last station, the window will not pop up.)


Page 29



SCFT Moving Measurement Configuration

..

1. Click

.




4. Configure Test type.

Page 30


5. Configure Site.



6. Configure Cycle. When complete, click Save button.

7. The above screen is displayed when setting is completed. Click Start button.

Page 31



Moving Master/Slave Scenario Configuration After setting, the scenario is assigned automatically. If want to change the scenario, follow the procedure as below.

1. Select Master Scenario.


2. Click OK button.

3. Select Slave Scenario.

4. Click OK button.

Page 32


5. When Setting is completed, the above screen is displayed. Click Start button.


6. Autocall test is started and the Slave screen is displayed.

Slave Screen

When Master device is started, the Autocall test is started at the same time with Slave device.


Page 33



Cluster Measurement Configuration

..

1. Click

.




4. Cluster is configured in automatically.

Page 34


5. Configure Cycle in Select Cycle Count. When completed, click Save button.



6. When the setting is completed, the above screen is displayed.

Page 35



Cluster Master/Slave Scenario Configuration After setting, the scenario is assigned automatically. If want to change the scenario, follow the procedure as below.

1. Select Master Scenario.


2. Click OK button.

3. Select Slave Scenario.

4. Click OK button.

Page 36


5. When Setting is completed, the above screen is displayed. Click Start button.


6. Autocall test is started and the Slave screen is displayed.

Slave Screen

When Master device is started, the Autocall test is started at the same time with Slave device.


Page 37



Upload after Measurement

1. Click Stop button.

2. Select termination type. Complete: End test. In Progress: Test following this test.


3. Click OK button to upload. If you don’t want to upload, click Cancel button.

If there is a Slave device, the upload request window will pop up in Master window.

(If check ‘Do not ask again’, the previous set value will maintain without upload request window executing.)

Page 38



..

4. Click

.


5. You can check the above upload list.

Page 39



Log Manager Setting Item Select File Name Filter

Check the user desired log file type.

Auto DRM/DRX upload(Only all scenario)

After Autocall, display DRM/DRX file upload request pop-up or not.

Auto DRM/DRX upload(Do not ask again)

Configure Auto DRM/DRX pop-up executing. It can only configure when Auto DRM/DRM Upload is activated.

FTP Server Setting


Description

Configure FTP server which uploads the log file.

Page 40


T

Terminating XCAL-Auto Mobile

erminating XCAL-Auto Mobile

When you have completed all necessary measurement test with XCAL-Auto Mobile or you want to terminate the application while measurement, you can terminate the application.

Press Home button on smart phone hardware, and XCAL-Auto Mobile application runs in background mode


Page 41


1. When you want to terminate XCAL-Auto Mobile application, tap Back button on smart phone hardware.


Terminating XCAL-Auto Mobile

2. Select the desired menu. Go to the Background Cancel

3. XCAL-Auto Mobile application is terminated.

Kill the XCAL-Auto Mobile

Page 42


R

RF Information (Qualcomm Chipset)

F Information (Qualcomm Chipset)

XCAL-Mobile displays real-time RF information of smart phone. XCAL-Mobile shows following RF parameters. Android RF Signal Messages

LTE Cell RTP Summary

LTE Summary LTE Signal RF parameters in blue color are available depending on device type. For details of parameter description of each technology, see Appendix: Parameter Description.


Page 43


1. In main screen of XCAL-Mobile, tap RF button.


2. To select RF parameter, swipe down the green bar at the top of the screen. You can see various RF information view types. Select a view type icon. For details, see next pages.

3. The selected view type screen appears.

Swipe left and right to monitor other RF Information screens. Swipe up and down to monitor more data in a RF Information screen.


Page 44



Summary List of RF Information Icon Android RF Signal Message

Description Displays all the information collected from Android OS. Displays Layer3 message for all technologies supported.

LTE Summary

Displays major RF KPIs for LTE in table.

LTE Signal

Displays major RF KPIs for LTE in graph.

LTE Cell RTP Info

Displays signal strength and information from serving and neighbor LTE cells measured by the device. Displays packet analysis from RTP messages when running VoLTE autocall. It contains the following parameters: Rx Packet Loss, Rx RTP Throughput, Rx Delay, Rx Delta Delay, Rx Jitter, One Way Delay, RTP Packet Count, Round Trip Time.


Page 45



Android RF

Signal Messages

Android RF screen shows basic RF information provided by Android

Signal Messages screen shows RRC messages of corresponding

OS.

technology. Signal Messages is available depending on device type. Current Network/Phone Type Operator

LTE RRC/NAS messages

Latitude Longitude Data State Current CPU usage Usage/APP Memory Battery AutoCall Log File Size SD Free Space Phone Model Phone OS Ver Rooting DM Time(Received)


Tap

a

message

from

Signal

Message list, and corresponding code is shown.

Page 46



LTE Summary

LTE Signal

LTE Summary screen shows LTE Parameters.

LTE Signal screen shows RSRP, RSRQ, RSSI, Tx Power, SINR, CQI,

LTE Summary is available depending on device type.

and Rank Index. LTE Signal is available depending on device type.

RSSI Tx Power PCI (Serving) RSRP (Serving) RSRQ (Serving) SINR (Ant0/1) CQI (CW0/1) Rank Index UL Power Headroom UL/DL RB Num (Avg.) UL/DL MCS (QPSK/16QAM/64QAM) PDSCH/PUSCH BLER PDSCH/PUSCH Throughput UL/DL MAC Throughput. Path Loss Traffic State Wideband PMI MCC/MNC EARFCN (DL/UL) Bandwidth (DL/UL) Band Indicator Tracking Area Code Cell ID (Serving) Allowed Access EMM State/Substate DL/UL Transmission Mode Num of Tx/Rx Antenna


RSRP (Ant0/1) RSRQ (Ant0/1) RSSI (Ant0/1) Tx Power(PUSCH) SINR(Ant0/1) CQI Rank Index UL/DL RB Num (Avg.) PDSCH/PUSCH Thp DL/UL MAC Thp.. Following parameters are shown during VoLTE measurement. Rx Delay Rx Jitter Rx Packet Loss

Page 47



LTE Cell

RTP Info

LTE Cell screen shows Set, EARFCN, PCI, RSRP, RSRQ, and Cell

VoLTE Summary screen shows Rx Packet Loss, Rx RTP Throughput,

Graph. Colors of Set and Graph line are the same.

Rx Delay, Rx Delta Delay, Rx Jitter, One Way Delay, RTP Packet

LTE Cell is available depending on device type.

Count, and Round Trip Time. RTP Info is available on VoLTE call running.

Set

Rx Packet Loss Rate

EARFCN

Rx RTP Throughput

PCI

Rx Delay

RSRP

Rx Jitter

RSRQ

Rx Inter-arrival time difference Rx Inter-arrival jitter One Way Delay Rx/Tx RTP Packet Count

RTT Tap RSRP, RSRQ button to show RSRP and RSRQ of Cell Measurement. Default is set to RSRP. Tap RSRQ button to initiate graph.


One Way Delay Inter arrival Jitter Lost Packet Number (cumulative)

Page 48


C

Configuring Logmask

onfiguring Logmask

Before you begin measurement project, you are able to define log codes to collect and monitor. By selecting necessary log codes for each technology, you may save time for creating logging file and performance capacity. Log codes list varies depending on chipset type.


Page 49


Configuring Logmask

Configuring Logmask Setting In Logmask Setting screen, select technology tab at the top of the screen and select the check boxes of log codes to collect and monitor.

1. Tap Menu - Log Mask Setting button.


2. Logmask Option Setting screen appears. Tap a technology tab to configure log codes at the top of the screen.

3. Tap + button to expand log code list for the technology.

4. Select the checkboxes of log codes to measure and tap Apply & Save button. Or, Tap Recommend button to select recommended log codes.

Page 50


P

Performing AutoCall Test

erforming AutoCall Test

XCAL-Mobile generates and terminates voice and data calls automatically. Configures and edits AutoCall scenario (for Single/Multiple call test). Starts AutoCall test. Terminates AutoCall test.


Page 51



Creating AutoCall Scenario (For Single Call Test) Before you start AutoCall test, you need to pre-configure AutoCall scenario (script). AutoCall scenario can be configured and edited in smart phone. For Single call AutoCall test, XCAL-Mobile processes AutoCall test call by call. It supports call types of Voice, FTP, Web, Ping, and VoLTE.

1. In main screen of XCAL-Mobile, tap Menu tab.

2. Tap AutoCall Settings. Or, tap Add/Edit button next to scenario combo box of Main screen to move to AutoCall Scenario creation screen directly.


3. Tap a call type.

5. Enter a call name in Call Name entry field.

4. Get Scenario: Downloads created AutoCall Scenario from FTP server to XCALMobile. See Downloading AutoCall Scenario.

Page 52


1. Configure AutoCall scenario.


2. Tap Save button.

3. A new AutoCall scenario is created successfully.

4. Tap Call Name combo box, and you may find the created scenario in the list.

For detail of how to configure AutoCall scenario for each call type, see Appendix: Configuring AutoCall Scenario.

To edit existing scenario, open a scenario configuration screen, edit setting, and tap Save To create more scenarios, tap New


button.

button.

Page 53



Creating AutoCall Scenario (For Multiple Call Test) Before you start AutoCall test, you need to pre-configure AutoCall scenario (script). AutoCall scenario can be configured and edited in smart phone. XCAL-Mobile processes AutoCall test for multiple calls sequentially (Multi-Call) supporting all call types. AutoCall test for multiple calls applies the AutoCall scenarios pre-configured for single call tests.

For details of how to configure AutoCall scenario for single call test, see Creating AutoCall Scenario (For Single Call Test).


Page 54



AutoCall Test for Sequential Multiple Calls (Multi-Call) XCAL-Mobile processes AutoCall test for multiple call types sequantially.


2. Tap AutoCall Settings. Or, tap Add/Edit button next to scenario combo box of Main screen to move to AutoCall Scenario creation screen directly.


3. Tap Multi-Call.

4. Tap scenario combo box to select scenarios sequentially, and the selected call scenarios are listed. 5. Tap checkboxes of the selected call scenarios to include and process multi call test.

Page 55


6. Configure Repeat Count of call test. Create logging file for each scenario: Select the checkbox if you want to create logging file (*.drm) for respective AutoCall scenario.



7. Tap Save button to save test options. 8. Tap Start button to start Multi-Call test.

9. Multi-Call test is started moving to Call Stat. tab, and shows test status in table and graph.

11. Tap AUTOCALL STOP button to terminate the test while measurement.

10. Tap the graph at the bottom of the screen, and shows status data in table. Tap the table to show data in graph vice versa.

Page 56



Importing AutoCall Scenario Created AutoCall scenario can be downloaded from ftp server to XCAL-Mobile. Name of AutoCall Scenario file in FTP should be AutoCallScenarioAlias.ini or AutoCallScenarioSet.ini.

1. Tap Menu – AutoCall Settings button.


2. Tap Get Scenario button in AutoCall Settings screen.

3. GET SCENARIO screen appears. Configure ftp server information to download AutoCall scenario.

4. Tap Get button.

Page 57



Starting AutoCall Test (In Classic tab) You may start AutoCall test by tapping Start button in Main tab, and AutoCall test is started based on configured AutoCall scenario.

1. Tap Main tab.

2. Swipe left and right on Call Type section to select a call type to test.

4. Tap Start button to start AutoCall.

5. AutoCall test starts.

3. And tap Scenario Name combo box to select a call scenario.


Page 58


6. Main screen moves to Call Stat. tab, and shows test status in table and graph.



7. Tap the graph at the bottom of the screen, and shows status data in table. 8. Tap the table to show data in graph vice versa.

9. During measurement, tap Map button to display measurement data and serving line graphically in Google map in real-time. For details, see Monitoring in Digital Map.

10. When automated call test is automatically terminated based on pre-configured call script, Result History screen appears. For details, see Call Result History.

Page 59



Starting AutoCall Test (In All Scenarios tab) You may start AutoCall test by tapping Start button in Main tab, and AutoCall test is started based on configured AutoCall scenario.

1. Tap Main tab.


2. Tap All Scenarios tab.

3. Select a pre-configured AutoCall scenario, and tap START button to start AutoCall.

4. AutoCall test starts.

Page 60


5. Main screen moves to Call Stat. tab, and shows test status in table and graph.


6. Tap the graph at the bottom of the screen, and shows status data in table. 7. Tap the table to show data in graph vice versa.


8. During measurement, tap Map button to display measurement data and serving line graphically in Google map in real-time. For details, see Monitoring in Digital Map.

9. When automated call test is automatically terminated based on pre-configured call script, Result History screen appears. For details, see Call Result History.

Page 61



Terminating AutoCall Test XCAL-Mobile normally terminates an AutoCall test automatically when it runs through the whole course of the AutoCall scenario (script). However, it can be also be terminated by tapping AUTOCALL STOP button during AutoCall measurement. When it is terminated, Result History screen appears. Tap one of AutoCall tests, its details are shown. For detail, see Call Result History.

1. AutoCall test is terminated automatically.


2. Or, you can terminate AutoCall test while measurement.(Auto Call Stop Button)

Page 62


M

Monitoring in Digital Map

onitoring in Digital Map

Measurement data and serving lines are visualized in digital map in real-time during measurement. Internal GPS of smart phone is used for location information, and if you import BTS/Repeater data, map displays their information. Digital map supports two map types; image map and satellite map. The speed at which digital map displays greatly depends on the internet access speed of the handset itself. 3G coverage area shows faster update than that of 2G coverage area. XCAL-Mobile basically support Google map for monitoring data in smart phone screen. If you want to use Baidu map, select Baidu map option from Map Options – Settings. For details, see Configuring Map Options – Settings.

Displays data in digital map. Configures map options. Configuring Map Options - Parameters Configuring Map Options - Settings. Imports BTS/Repeater Data


Page 63



Displaying Data in Digital Map XCAL-Mobile enables you to see measurement data and serving lines in Google map.

1. In main screen of XCAL-Mobile, tap Map tab.


: Marks current location in green color in digital map.

: Shows satellite

2. Tap Menu button on smart phone hardware to open Setting window.

: Shows image map.

Page 64



Configuring Map Options XCAL-Mobile enables you to change map setting in Google map. To open Map Options, tap Menu button on smart phone hardware. Items

Description

BTS On/Off

Shows/Hides BTS in map.

RPT On/Off

Shows/Hides Repeater in map.

Legend On/Off Parameter

Shows/Hides legend in map. Selects parameters of technologies to display in map. For details, see Configuring Map Options – Parameters.

Clear Call Event On/Off Settings

Clears data in map. Shows/Hides call events in map. Configures symbol size, update time interval, minimum distance for data update, user location, BTS/RPT size, serving line width, and importing BTS data from FTP/local disk. For details, see Configuring Map Options – Settings.

Route On/Off Capture


Shows/Hides Route in map. Captures current screen.

Page 65



Configuring Map Options – Parameters Parameters button in Map Options menu selects parameters of technologies to display in map. Tap Parameters button, and Parameters pop-up screen appears. Select technology and corresponding parameter you want to display on the map. Items Common LTE


Description App. DL Thp, APP. UL Thp, Network Type RSSI, RSRP, RSRQ, SINR

Page 66



Configuring Map Options – Settings Settings button in Map Options menu configures symbol size, update time interval, minimum distance for data update, user location, BTS/RPT size, serving line width, and importing BTS data from FTP server or local disk. Items

Description

Symbol Size

Configures symbol size that is currently displayed in the map.

Update Time

Configures time to update to the map. (unit: sec)

Min. Distance

Configures minimum distance to move to update to the map. (unit: meter)

Auto Focus

Places user location at the center of map when the current location is out of the map.

Offline Map

Loads and displays mobile local disc map when data connection (3G, WiFi, LTE, etc.) is unavailable.

Baidu Map

Shows Baidu map from China.

BTS/RPT Size

Configures BTS/Repeater size.

Line Width Size

Configures serving line width.

BTS Update From FTP

Imports BTS data from FTP server or Local Disk. Tap BTS Update From FTP Server / Local

Server / Local Disk

disk button, and configure FTP server / Local Disk information where BTS data file is saved. BTS data file should be in *.ini format. For details, see Importing BTS/Repeater Data. Some FTP server requires Passive Mode on.

BTS/RPT Clear


Clear stored BTS/RTS data in map

Page 67



Importing BTS/Repeater Data Existing BTS/Repeater data file in FTP server or smart phone local disc can be imported to XCAL-Mobile.

[File Name Format] BTS File: name of technology.ini Repeater File: name of technology_R.ini


Page 68


1. In main screen of XCAL-Mobile, tap Map tab.


2. Tap Menu button on smart phone hardware to open Setting window.

3. BTS Update From FTP Server: Imports existing BTS/RPT data file from designated FTP server. 4. BTS Update From Local Disk: Imports existing BTS/RPT data file from smart phone local disc.


Page 69


[BTS Update from FTP Server] a. Tap BTS Update from FTP Server button. BTS DB Server Settings screen appears.



b. Configure FTP information, and tap BTS Update or Repeater Update button.

c. XCAL-Mobile application connects to the configured FTP server and Server Connected pop-up message appears.

e. Tap Yes button.

d. Tap to select *.ini file to import from DB file list.

Page 70


f.

Make sure DB Updated pop-up message is displayed.



g. Tap Save button to load imported BTS/RPT data file to map.

h. Imported BTS/RPT data is displayed in map.

Page 71



[BTS Update from Local Disk]

c. Cell site DB Update screen appears.

a. Tap BTS Update from Local Disk button. BTS Update From Local Disk screen appears.

d. Tap to select *.ini file to import from DB file list.

e. Tab Yes button.

f.

The selected BTS/RPT file is imported to XCAL-Mobile with the pop-up message of DB Updated

b. Tap BTS/Repeater Update button.


Page 72


C

Call Result History

all Result History

XCAL-Mobile provides a list of AutoCall test you have completed and its details. The list of AutoCall test result (Result History) is shown from; Result History list after terminating AutoCall test Call Result History in Menu tab


Page 73



3. Result History list appears.

2. Tap Call Result History.

3G

, WiFi

Call Result History

, LTE


4. Tap one of AutoCall tests, and XCALMobile shows its details.

5. Only FTP, Throughput Info appears when tapping test result in Detail Info.

icons in Result History list shows each call test has been performed in 3G or WiFi or LTE environment.

Page 74


U

Uploading Log File

ploading Log File

XCAL-Mobile enables you to upload test logging file to a designated FTP server.

When AutoCall test is completed, log files are generated in *.drm and *.csv format as a pair. Logging files in *.csv format help to see results of measurement data on smart phone itself. Logging files are saved in XCAL-Mobile/Logging folder.


Page 75


1. In main screen of XCAL-Mobile.

Uploading Log File

2. Tap Menu tab. And Tap Log Upload button.

3. Do you want to turn Wi-Fi on? Pop-up screen is shown.

5. A list of logging files is shown.

4. Log Upload function is only available when WiFi is on.


Page 76


6. User can upload checked logging files to a designated FTP Server.

Uploading Log File

: Select all logging files. : Unselect all selected files. : Delete selected files.

When tapping Upload button without configuring Upload setting at the topright of the screen, Not Found Server address is popped up at the bottom of the screen.

7. FTP server configuration screen appears.

: Configure FTP Server. For details, see Uploading Setting.


Page 77


8. Configure FTP server to upload logging files. 9. Tap Save button. 10. Tap Back button


Uploading Log File

11. Tap Upload button. 12. Progress bar is shown.

13. When uploading process is finished, Upload End (Complete) 100% message is shown. Tap the screen to return the previous screen.

If you stop while uploading, End by User message is shown and uploading process is stopped.

Page 78


Uploading Log File

Uploading Setting XCAL-Mobile enables you to configure uploading options in Upload Server screen.

1. Tap Set button in Log Upload screen.

2. Upload Server (FTP) screen appears. 3. Configure FTP options; FTP server address, Port number, user ID/PW, Server Path.

4. DRM Auto Upload: Uploads log file in *.drm format onto FTP server automatically when AutoCall test is terminated.

6. Tap Save button at the upper right side of Upload Server (FTP) screen to complete configuration. 7. Completion pop-up message appears at the bottom of the screen.

5. E-Mail Notification: Automatically sends message to the configured e-mail address when uploading is completed.


Page 79


A

Uploading Log File

dditional Function

XCAL-Mobile provides you with further functions. Manual Logging Replay Screen Capture About (License Return, Help) Other Settings (Naming Log File, CSV Delimiter, RAT & Band Lock, External GPS,TTS Alarm, Split log file)


Page 80


Chapter 11. Additional Function

Manual Logging Basically, XCAL-Mobile automatically generates and saves logging file after AutoCall test. It also allows you to manually generate and save logging file, which includes monitoring signal and packets coming from smart phone, without AutoCall test. If AutoCall test is started during manual logging, XCAL-Mobile stops generating manual logging file, and starts generating AutoCall logging file. XCAL-Mobile gives first priority on AutoCall logging file.

1. Tap Menu button on smart phone hardware to pop Manual Logging function. Tap Logging start button.


2. When Manual Logging function is on, manual logging running icon is displayed at the upper left corner of screen.

3. Tap Menu button on smart phone hardware. Tap Logging Stop button to stop manual logging.

4. Manual Logging drm file will be generated on Log Upload Screen.

Page 81



Manual Logging function runs in background mode. You can use other smart phone features while running Manual Logging function of XCALMobile in background mode.

1. When Manual Logging function is on, manual logging running icon is displayed at the upper left corner of screen.


2. Tap Back button on smart phone hardware to terminate XCALMobile application. For detail, see Terminating XCALMobile.

3. A confirmation pop-up screen appears. Tap Yes button.

4. XCAL-Mobile application is terminated, and Manual Logging function runs in background mode.

Page 82



Replay Replay function replays existing logging file. RF information of smart phone will be displayed. Logging files in *drm format are available for Replay function.

1. Tap Menu button on smart phone hardware to pop Replay function. Tap Replay button.


2. Tap Add button.

3. A list of logging files is shown. Tap one of logging file to replay.

4. Information of selected logging file is displayed. 5. Tap Click to Replay button.

Page 83


6. Replay status is shown in percentage at the top of Replay screen.


8. User can set the Replay speed using top of Screen. (1x, 2x, 3x)

7. Replay is completed showing replay status of 100% at the top of Replay screen.


Page 84



Screen Capture For the easier troubleshooting purpose, Screen Capture function captures the current screen and report message to Accuver along with the captured screen image.

1. Tap Menu button on smart phone hardware, and tap Screen Capture button.


2. Captured image files are listed. Select captured image you want to report error. Tap Send button.

3. My Info Setting screen appears. Configure your information, and tap Send to Accuver button.

4. Error is reported via email successfully.

Page 85



About About screen checks registration status, returns the currently used XCAL-Mobile License, and opens Quick Guide. About screen shows license type, expiration date, supportable technology, chipset, supportable AutoCall types, and functions.

1. Tap Menu button on smart phone hardware to pop About function. Tap About button.


2. About screen shows Device Type, License Type, License date information, chipset, supportable AutoCall type, technologies, and functions.

3. To return the currently registered and using license, tap Return the License button at the bottom of the screen.

4. Tap Return the License button, and confirmation screen pops up. Tap Yes button to return License.

Page 86


5. To delete the currently registered and using license, tap Delete the License in Mobile button at the bottom of the screen.


6. Tap Delete the License in Mobile button and confirmation screen pops up. Tap Yes button to return License.

7. To open Quick Guide file, tap Show the Quick Guide button in About screen.

9. Quick Guide and User Guide of XCAL-Mobile is opening. Swipe up and down the screen to read.

8. To open User Guide file, tap Show the User Guide button in About screen.

10. To close tap Back button on smart phone hardware.

Quick Guide and User Guide are not opened during AutoCall test.


Page 87



Other Settings Options screen enables you to configure extra options for program starting up operation, logging file, and etc. To open Options screen, tap Menu – Other Settings button. Configure options, and tap Save button to save setting. Items Startup

Description Configures options related to the program start-up. Screen Always on: Literally, XCAL-Mobile screen is always on. Auto Start: Executes XCAL-Mobile program when powering on the smart phone device. Auto Logging: Starts Manual Logging when executing XCAL-Mobile application. Manual logging in Background mode: Runs manual logging in background mode. Manual logging is processed while using other smart phone applications. Manual logging is started when selecting Menu – Logging Start.

Logging

Configures options related to logging file. Packet Capture: Save IP Packet Capture data using PCAP function Save to DRM File: Includes packet capture data to the current logging file (*.drm file). Save to PCAP File: Saves packet capture data to another file (*.pcap file) separately. IP Frame (to DRM): Adds IP data using DM interface to the current logging file (*.drm file) : Configures packet length of IP Frame. For SIP and RTP of VoLTE, configure as 1,500. When it is configured as 1,500 for high throughput testing, it may cause loss of DM data. : When it is checked, air plane ON/Off runs automatically. This icon is recommended for mobiles with Qualcomm chipset. : Configures for some special devices such as Galaxy Note2.


Page 88



(Continue) Items Logging

Description XCAL Format: Includes Timestamp data to existing log codes. Real Time Compress: Compresses logging file (*.drm -> *.drx) Path: Designates logging file save path. Naming Log File: Enables you to configure name of log file before/after AutoCall. For details, see Other Settings – Naming Log File. Naming Log File (Before AutoCall): Configures log file name before starting AutoCall. Naming Log File (After AutoCall): Configures log file name when AutoCall test is completed. Confirm Start Autocall: Pop-up screen appears, when AutoCall starts. CSV Delimiter (Current: Tab): For details, see Other Settings - CSV Delimiter.

Phone Set Mode

Configures network mode of smart phone device. Network (RAT/Band) Lock (DM): Tap Set button to configure technology, band, and UARFCN/ARFCN of WCDMA/GSM using NV Read/Write functions. Network type varies depending on License key type. It is supported by Galaxy S2 LTE and Galaxy S4 LTE. RAT/Band Lock (Hidden): For Galaxy S3 (GT-I9305)/Galaxy Note2 (GT-N7105) only. Configure data network and band for test. For details, see Other Settings – RAT & Band Lock.

Logcat

Logcat Logging: Logging the log information output by Android OS and applications. Logcat Filter: Filtering the specific log messages. Set the Logcat command, Timestamp, Alternate log buffer and Filter-spec. Save Logcat files (Separately): Save Logcat files separately.


Page 89



(Continue) Items GPS

Description Ext.GPS: Connects external GPS for location information. For details, see Other Settings – External GPS. Internal GPS: Network GPS:

TTS Alarm

TTS Alarm Message: When the GPS status or DM status is abnormal, then voice alarm or pop-up message will appear. It is divided into two categories, System and Transition. System Voice Alarm is on when GPS and DM status are abnormal, Transition Voice Alarm is on when LTE-PCI status is abnormal.

Split log file

Adjust log file size by user-set time or size. Per Time: Split log file per time. Per Size: Split log file per size.


Page 90



Other Settings - Naming Log File XCAL-Mobile application is designed to save log file automatically when AutoCall or Manual Logging test is completed. With Naming Log File option, you may configure name of log file in *.drm format. You can configure before or after AutoCall or Manual Logging test.

1. Tap Menu – Other Settings. 2. Tap the checkbox for Naming Log File (Before/After AutoCall).


3. Naming Log File (Before AutoCall): Configures name of log file (*. drm) before starting AutoCall or Manual Logging test.

4. Naming Log File (After AutoCall): Configures name of log file (*.drm) after completing AutoCall or Manual Logging test.

5. Log file is saved with the user pre-configured log file name.

Page 91



Other Settings - CSV Delimiter XCAL-Mobile application is designed to create paired log files in *drm and *csv format when AutoCall or Manual Logging test is completed. With CSV Delimiter option, you may configure delimiter in *.csv file between comma and tab. Default is set to comma.

1. Tap Menu – Other Settings. 2. Default is set to Comma.


3. Tap the checkbox for CSV Delimiter to change delimiter to Tab.

Examples of *.csv files with delimiter of Comma and Tab.

Page 92



Other Settings – Network (RAT/Band) Lock (DM) RAT & Band Lock function enables the device to select Radio Access network and bands which user wants to set using NV Read/Write function. After setting the RAT or bands, user needs to reboot the device manually. Support Mobile: Galaxy S2 LTE and Galaxy S4 LTE

1. Tap Menu – Other Settings. 2. Tap to select SET button for Network(RAT/Band) Lock(DM)


3. SET button for RAT Lock shows RAT Lock screen. 3-1. Tap to select the checkboxes of technologies, and tap SET button.

4. SET button for Band Lock (Hidden) shows Band Lock screen. Tap Conversion icon at the right side of Band Lock to converse to RAT Lock screen, and vice versa.

4-1. Tap Check button for the Radio Access technology to be selected and tap OK button. 4.2 Tap to select checkboxes of bands, and tap OK button.

Page 93



Other Settings - RAT & Band Lock (Hidden) RAT & Band Lock function enables you to configure data network and band for test. Proper firmware is need for RAT & Band Lock function. Support Mobile: Galaxy Note2 (GT-N7105), Galaxy S3 (SGH-I747M/GT-I9305T/SGH-I747/GT-I9305), Galaxy S4.

1. Tap Menu – Other Settings. 2. Tap to select SET button for RAT Lock (hidden) or Band Lock (Hidden).


3. SET button for RAT Lock shows RAT Lock screen. 3-1. Tap to select the checkboxes of technologies, and tap SET button.

4. SET button for Band Lock (Hidden) shows Band Lock screen. Tap Conversion icon at the right side of Band Lock to converse to RAT Lock screen, and vice versa.

4-1. Tap + button to unfold technology band. 4-2. Tap to select checkboxes of bands, and tap SET button.

Page 94



Other Settings - External GPS In order to minimize errors during measurement test, external GPS can be connected through Bluetooth function and used for XCAL-Mobile.

1. Tap Menu – Other Settings. 2. Tap the checkbox for Ext.GPS.


3. When Bluetooth function is not activated, Bluetooth permission request pop-up screen appears. Tap Yes button.

4. Make sure Bluetooth enabled pop-up message appears. 5. Tap Scan for Device button to list up paired Bluetooth.

6. Green dot at the right top corner of the screen means external GPS is connected properly. 7. Red dot means external GPS is not connected. 8. Column of GPS Information in RF Information screen displays External GPS.

Page 95



Other Settings – TTS Alarm In order to detect abnormal status of device during measurement test, TTS Alarm function is used. When the GPS status or DM status is abnormal, then voice alarm or pop-up message will appear.

1. Tap Menu – Other Settings. 2. Tap to select SET button for TTS Alarm Manager.


3. Set button for Voice Alarm Setting.

4. Tap to select the checkboxes of TTS or Toast function, and tap Save button.

Page 96



Other Settings – Split log file Split log file function divides a log file into time and size unit.

1. Tap Menu – Other Settings.


2. Per time: split log file per time. Configure time as user desired time.

3. Per size: split log file per size. Configure size as user desired size.

4. Check creation of several log files as 10MB unit.

Page 97


M

Master/Slave Test

aster/Slave Test

XCAL-Mobile builds Master/Slave test feature to measure several Slave test mobiles simultaneously under the control of one Master mobile. Test mobiles can perform measurement test as a master or slave mobiles by configuring in XCAL-Mobile application. Up to three slave mobiles can be controlled by one master mobile. Slave mobiles are available for in-building test.

Master/Slave feature runs for authorized license key users only. For authorized license key, contact to Accuver Support. Master/Slave function is supported for smart phone models in Android OS version greater than 4.0 (Ice cream sandwich). Some Master mobile models may be unable to connect more than 2 Slave mobiles due to Bluetooth function. It is recommended to use smart phones manufactured by Samsung Electronics. Configures for Master or Slave mobile in XCAL-Mobile application. Starts M/S test under the control of one master mobile.


Page 98


Master/Slave Test

Configuring Master or Slave Mobile In XCAL-Mobile application, you can define the test mobile as master or slave side. Master and Slave mobiles are to be configured in parallel. Following procedure instructs how to define the test mobile as master or slave and assign AutoCall scenario for master and slave mobiles respectively. Up to three slave mobiles can be assigned for one master mobile.

1. Tap Menu button on smart phone hardware, and tap M/S button.


2. Select Master or Slave. 3. To configure the test mobile as a master mobile, tap Master. To configure the test mobile as a slave mobile, tap Slave.

4. Tap Master or Slave icon ( / ) in the status icon bar at the upper right corner of the screen to switch mode.

Master-1. In Master side, tap Bluetooth Search button to connect Slave mobile to Master mobile.

Page 99


Slave-1. In Slave side, tap Connect to Device button.

Master/Slave Test

Slave-2. Bluetooth Connect pop-up screen appears. Slave-3. Select a MAC address of Master to connect from the list. Bluetooth Connect pop-up screen disappears automatically.


Slave-4. Connection to master mobile is completed.

Master-2. (In Master side) When Slave mobile is connected to Master mobile properly, connection status is showed as Connected. MAC address of Slave mobile is displayed for respective Device ID.

Page 100


Master-3. When three Slave mobiles are connected to Master mobile properly, the status icon displays three small LEDs in MS icon. Number of LEDs in MS icon in the status icon stands for number of Slave mobiles connected to Master mobile.


Master/Slave Test

Master-4. Tap Master Scenario Set or Scenario Set button to assign AutoCall scenario for master and slave mobile. Master-5. Choose a Scenario pop-up screen appears. Select an AutoCall scenario.

5. Master Scenario Set: Assigns AutoCall scenario of master mobile. 6. Scenario Set: Assigns AutoCall scenario of respective slave mobile. Pre-configured AutoCall scenarios are listed in Choose a Scenario screen. For details of how to configure a new AutoCall scenario, see Creating AutoCall Scenario.

Page 101


Master/Slave Test

Starting M/S Test You completed configuration of master/slave mode for the smart phone installed XCAL-Mobile application and assignment of AutoCall scenario for master and slave mobiles respectively. Master/Slave function enables you to start AutoCall test for all connected master and slave mobiles at the same time.

1. Make sure type and name of AutoCall scenario is properly assigned for master and slave mobile.


2. Slave mobile displays details of the selected AutoCall scenario in the screen.

3. In Master mobile, tap AutoCall Start button to start AutoCall test for master and slave mobile at the same time. Master and slave mobile start AutoCall test.

4. To terminate AutoCall test, tap Menu button on smart phone hardware, M/S button, and AutoCall Stop button in order.

Page 102


Master/Slave Test

Inbuilding Test of Master/Slave Mobiles Master/Slave mobiles are able to perform inbuilding test supporting both Moving and Fixed point modes. Master and Salve mobiles save the same inbuilding measurement options. When inbuilding test options are configured in Master mobile, they are configured in Slave mobile automatically. Inbuilding configurations and test processes are the same of normal XCAL-Mobile application. For details of Inbuilding test, see Inbuilding test.

1. Make sure Master and Slave configuration is completed properly.


2. Tap Inbuilding Start button in Master mobile. Configure Inbuilding test options.

3. Start inbuilding test in Master mobile, Slave mobiles are started in the same condition automatically.

4. When inbuilding test is completed, tap Done button in Master mobile. Inbuilding tests in Slave mobiles are terminated automatically.

Page 103


I

Inbuilding Test

nbuilding Test

XCAL-Mobile enables you to perform measurement inside of a building. Configures Inbuilding test. Starts Inbuilding test. Moving Point: Performs call test while moving inside of a building. Fixed Point: Performs call test at a certain measurement point inside of a building.


Page 104


Inbuilding Test

Configuring Inbuilding Test Before starting Inbuilding test, configure Inbuilding test.



2. Tap Inbuilding.

3. Inbuilding List screen appears. Tap Add button.

4. Inbuilding Setting screen appears. Enter a building name in Building entry field.

Page 105


5. Tap Floor button, and swipe up and down to select floors.


Inbuilding Test

6. Tap Upper/Under button. The left section designates ground floors and above ground floors. The right section numbers starting with B designates basement floors.

7. Swipe up and down to select floors and Tap Done button.

8. Select a measurement type between Moving and Fixed. Moving: Performs call test while moving inside of a building. For detail, see Moving Point Test. Fixed: Performs call test at a certain measurement point inside of a building. For detail, see Fixed Point Test.

Page 106


9. Tap Get GPS button to configure current GPS information (or enter longitude and latitude data in Lon and Lat entry field). Address1 will automatically be filled up with address of current location as it is suggested by Google Map Search.

Inbuilding Test

10. Enter an Address in Address 2 entry field.

12. Inbuilding – Fixed/Moving Screen appears.

11. Tap Save button to save Inbuilding configuration, and tap START button.

Some mobile requires tapping Get GPS button several times due to network condition.


Page 107


Inbuilding Test

Starting Inbuilding Test Indoor measurements can be accommodated in with AutoCall feature. After completing configuration of Inbuilding test, you may start Inbuilding test. Following procedure instructs how to start Inbuilding test.



2. Tap Inbuilding.

3. Select a building name.

4. Tap START button to start Inbuilding test.

Page 108


Inbuilding Test

Moving Point Test By selecting Moving type for Inbuilding, XCAL-Mobile will perform measurements while moving among points inside of a building. The following procedure describes the process to follow after tapping the START button to start Inbuilding test.

1. Tap START button to start Inbuilding test.


2. Inbuilding – Moving screen appears.

3. Tap the combo box for Call Name to select call scenario.

4. Select floor.

Page 109


5. Select building image file. Select Image: Selects existing image file inside of smart phone.

Inbuilding Test

6. Selected image file is shown.

7. Pinch open and out to zoom in and out of the image.

8. Tap a starting point on the image (floor map) to perform AutoCall test, and tap Yes to confirm this point is starting point.

Take Photo: Takes photo.


Page 110


9. XCAL-Mobile is ready to start Inbuilding test (with AutoCall), and Start button is activated. Tap Start button, AutoCall test will begin. Move to the second point.


Inbuilding Test

10. Inbuilding test is started, and its status is displayed at the lower left side of screen. Call measurement screen is shown for a few seconds and will return to Inbuilding image screen.

11. When you are arriving at the second point, tap the second point on image. Tap Yes button to confirm.

12. Configured parameters are shown on the image.

Page 111


13. Tap the third point.

Inbuilding Test

14. Then, start to move to the third point. Continue the same processes for following points.


15. Tap Menu button on smart phone hardware to activate settings.

16. Tap Legend Off button to hide legend in the image.

Page 112


17. Tap Parameters button to open parameters setting screen. Parameters are categorized by Common, LTE, 3G, 2G, CDMA, and EVDO.


Inbuilding Test

18. Configure parameter.

19. Selected parameter is shown in image.

20. Tap Settings button to configure Update Time to apply parameter values.

Page 113


21. Tap Done button to terminate test.

Inbuilding Test

22. When AutoCall is finished based on scenario, call test is automatically terminated. 23. Inbuilding test is completed, and Clear button is activated. To remove points, tap Clear button.

When Inbuilding test starts, Done button is activated. Selecting Done button will terminate/stop AutoCall test and Inbuilding test which is running.


Page 114


Inbuilding Test

Fixed Point Test By selecting Fixed XCAL-Mobile will perform measurements at a measurement point location inside of a building. The following procedure describes the process beginning with the START button to start the Inbuilding measurements:

1. Tap START button to start Inbuilding test, and Inbuilding – Fixed screen appears.

2. Tap the combo box for Call Name to select call scenario.

3. Select building image file. Select Image: Selects existing image file inside of smart phone. Take Photo: Takes photo.


4. Selected image file is shown. Select a certain point on image to measure, and tap Yes button to confirm the selected point is at the correct location.

Page 115


5. XCAL-Mobile is ready to start Inbuilding test, and Start button is activated. Tap Start button.


Inbuilding Test

6. Inbuilding test for Fixed type is started.

7. When AutoCall is finished based on scenario, call test is terminated automatically. Or, to stop call test manually, tap DONE button.

8. Inbuilding test at a fixed point is terminated, and Clear button is activated. To perform more tests at fixed points, tap Clear button, and repeat steps 4 - 8.

Page 116


Inbuilding Test

Configuring Inbuilding Options XCAL-Mobile enables you to change Inbuilding map setting in Inbuilding screen. To open Inbuilding Options, tap Menu button on smart phone hardware. Items Legend On/Off Parameter

Description Shows/Hides legend in map. Selects parameters of technologies to display in Inbuilding. For details, see Configuring Inbuilding Options – Parameters.


Settings

Configures data update time in Inbuilding screen.

Capture

Screen Capture

Page 117


Inbuilding Test

Configuring Inbuilding Options – Parameters Parameters button in Inbuilding Options menu selects parameters of technologies to display in Inbuilding. Tap Parameters button, and Parameters pop-up screen appears. Select technology and corresponding parameter you want to display on the Inbuilding. Items Common

Description App. DL Throughput /APP. UL Throughput Network Type

LTE

RSSI / RSRP RSRQ /SINR


Page 118


T

Terminating XCAL-Mobile

erminating XCAL-Mobile

When you have completed all necessary measurement test with XCAL-Mobile or you want to terminate the application while measurement, you can terminate the application. During AutoCall test, XCAL-Mobile application cannot be terminated. Stop AutoCall test first by tapping AUTOCALL STOP button in AutoCall test screen, and terminate the application. For details of how to terminate AutoCall test, see Terminating AutoCall Test. Press Home button on smart phone hardware, and XCAL-Mobile application runs in background mode


Page 119


1. When you want to terminate XCAL-Mobile application, tap Back button on smart phone hardware.


Terminating XCAL-Mobile

2. Exit configuration pop-up screen appears. Tap Yes button.

3. XCAL-Mobile application is terminated.

Page 120


T

Troubleshooting

roubleshooting

While using XCAL-Mobile, the program pops up a troubleshooting alarm screen when the program is terminated compulsively or by anonymous errors and launched again. You may report error to Accuver Technical Support team directly. Error report is sent to Technical Support team via an e-mail automatically.


Page 121


1. When you execute XCAL-Mobile after the program has been terminated compulsively or by anonymous errors, an alarm screen pops up.

Troubleshooting

2. Tap Send Error Report button to report error to Accuver Technical Support team.

3. My Info Setting screen appears. Configure user information.

4. Tap Send to Accuver button to report the error via an e-mail automatically.

Don’t Send: Ignores the alarm screen, and do not show the alarm screen again. Later: Shows the alarm screen next time you execute XCALMobile.


Page 122


R

Related Products

elated Products

XCAL-Mobile is compatible with Accuver’s other server-based solution series below.

is an autonomous total measurement and monitoring solution with web-based centralized management. Simply by installing XCAL-Auto in any vehicles, XCAL-Auto automatically collects data over the air and its central server controls remote-units and status information.

is a web-based total integrated platform that post-processes log files and provides engineers with a high level KPI and call failure view of the network via web client access. It also supports automatic reporting, automatic diagnostics of call failures, data export, download of log files, and etc.


Page 123


A

Appendix : Configuring AutoCall Scenario

ppendix: Configuring AutoCall Scenario

XCAL-Mobile supports the following AutoCall types; Voice, FPT, Web, Ping, VoLTE and Multi Call.


Page 124


Appendix: Configuring AutoCall Scenario

Time Configuration (Voice, Web, Ping, VoLTE) Following displays items commonly configured for voice call tests.

Enter a call name in the entry field.

Enter a call name in the entry field. Maximum time period to sustain connection calls Number of call attempts to repeat

Maximum time to setup radio link connection Time period to wait to start a new call after ending a call


Page 125



Time Configuration (FTP) Followings displays items commonly configured for data call tests.

Enter a call name in the entry field. Enter a call name in the entry field. Time to complete task. . Number of call attempts to repeat.

Time period to log in FTP Server Maximum time to setup network connection for a call. (Time Period to connect to data service) Time period to wait to start a new call after ending a call. (Time Period to change Flight Mode)

None: Idle – T.Setup(Log in) - Traffic Airplane Mode: Idle (Airplane ON) – Setup (Airplane Off) – T.Setup(Log in) – Traffic Wi-Fi Mode: Idle – Setup (Wi-Fi ON) – T.Setup(Log in) – Traffic


Page 126



Configuration for Each Call Type Followings are configuration options for each call type.

Voice

FTP Voice Type: 1)Ori : Call Send Test 2)Ter : Call Receive Test 3)Con : Continuous Call Test (Traffic Time unlimited) Dial Number: Phone Number

When tapping HW Menu button and tapping Speaker On button, you can use speakerphone function while processing Voice AutoCall test. For details of MOS Setting in Voice, see MOS Setting configuration.


FTP: Down: Download data Up: Upload data Passive Mode: FTP Server Option FTP IP Address: Targeting URL FTP User ID: FTP Server Setting FTP Password: FTP Server Setting FTP Server Path: FTP Folder Full Name Setting(Down/Up) FTP File Name: Name of the original file to be downloaded from server (For Download test) Kilo(k) & Mega(m) Unit Support: ex) 100k, 230k, 2m, 10m, … (For Upload test) Upload File Delete: Removes upload file every time test is terminated. Pending: If select Pending ON 1)Interval: Set max time limitation that allows pending conditions 2)Threshold: Set data throughput limitation that allows pending conditions

Page 127



Web

VoLTE Web Type: 1)Browsing : Web Browsing Test 2)HTTP Download : Web Downloading Test 3)HTTP Upload : Web Uploading Test Default Time out: Web Test End Event Delay Option(Default : 2 second) URL: Input scenario name and URL address in entry field

Voice Type: 1)Ori : Call Send Test 2)Ter : Call Receive Test 3)Con : Continuous Call Test in Origination (Traffic Time unlimited) Dial Number : Phone Number RTP TIMEOUT: Drop is pegged when none of RTP packets are received during the RTP TIMEOUT(second) set by user PickUp Delay PickUp Count

Ping Destination: Input IP address or URL of ping test destination Count: Input ICMP request count TTL: Input Time To Live (1 – 255) Packet size: Input size of data bytes to be transmitted Interval: Input ICMP request interval (second unit) Success Rate: Test Success Setting Value > Fail Rate Test Fail Setting Value < Fail Rate Fail Rate=[(Ping Count – Proceeded Count) + Fail of Proceeded count] / Ping Count


Page 128



Multi Call Multi Call enables you to perform test based

on

multiple

call

scenarios

sequentially. 1. Tap scenario combo box to select scenarios sequentially, and the selected call scenarios are listed. 2. Tap to select checkboxes of call scenario you want to include and process multi call. 3. Configure Repeat Count of call test. Create logging file for each scenario: Select the checkbox if you want to create logging file (*.drm) for respective AutoCall scenario. 4. Tap Save button. 5. Tap Start button to start automated Multi Call test. For

detail

of

how

to

configure

test

options of Multi-Call, see AutoCall Test for Sequential Multiple Calls (Multi-Call).


Page 129


A

Appendix : Call Events

ppendix: Call Events

XCAL-Mobile provides test result with call events by call types depending on AutoCall types.


Page 130


Appendix : Call Events

Voice

Web

Events Setup Fail

Description Setup fail occurs when radio link setup failure happens.

Drop

Call drop during progress of traffic

Idle

* CDMA : Fail to receive general page message * WCDMA : Fail to receive rrc Connection Request

Events

Description

Traffic Fail

Traffic fail is declared if connection to application layer fails after finishing PPP layer connection.

Page Connect Fail Pending

message

Page Connect Fail is declared when a wrong web site address is configured. If throughput is sustained under predefined threshold for designated time threshold, then pending is declared and the call will be dropped.

FTP

Time Out

If download or upload from/to application cannot be finished during predefined traffic time interval, Time Out

Events

Description

Traffic Fail

Traffic fail is declared if connection to application layer fails after finishing PPP layer connection. *This event is available for data service such as FTP, TFTP

is declared. Error

Number of calls with various errors such as No ATDT, modem Error and port error. These errors are related to test phone.

and HTTP Pending

If throughput is sustained under predefined threshold for designated time threshold, then pending is declared and the call will be dropped *This event is available for FTP

Time Out

If download or upload from/to application cannot be finished during predefined traffic time interval, Time Out is declared. *This parameter is available for FTP


Page 131


Appendix: Call Events

Ping

VoLTE

Events

Description

Events

Fail

Fail is declared when wrong IP and URL are configured.

Setup Fail

Error

Description Setup

Fail

is

declared

when

API

message:

Traffic fail is declared depending on the success Ratio.

CallEstablished is not received until Setup Time is

Number of calls with various errors such as No ATDT,

completed.

modem Error and port error. These errors are related to test phone.


Drop

Drop is declared when API Call Ended is received between Traffic Start and Traffic Time ends

Page 132


A

Appendix : Parameter Description

ppendix: Parameter Description

Detailed descriptions of parameters for each technology are listed.


Page 133


Appendix: Parameter Description

LTE Parameter RSSI Tx power PCI(Serving) RSRP(Serving) RSRQ(Serving) SINR(Ant0/Ant1) CQI(CW0/CW1) Rank Index UL Power Headroom RB Num Avg. (DL/UL) MCS(DL/UL)

Description

Parameter

Received Signal Strength indication measured Transmitted power of the device

Traffic State

Reference Signal Received Power for the serving cell(dBm) Reference

Signal

Received

Quality

for

the

Wideband PMI

Signal to Interference and Noise ratio for the serving cell(dB) Channel Quality Indicator of CW0 and CW1

Mobile Network Code

EARFCN(DL/UL) Bandwidth(DL/UL) Band Indicator Tracking Area Code

use in addition to the power being used by

Cell ID(Serving)

and UL Modulation Index and Percentages of Modulation schemes assigned(QPSK/16QAM/64QAM) Block Error Rate for PDSCH channel (%)

PUSCH BLER

Block Error Rate for PUSCH channel (%)

PDSCH Throughput

Throughput measured in PDSCH channel(Kbps)

PUSCH Throughput

Throughput measured in PUSCH channel(Kbps)

Wideband Precoding Matrix Indicator

MNC

How much transmission power left for a UE to

Average Resource Block number assigned in DL

Current traffic status of device Mobile Country Code

Rank Indicator

current transmission.

Downlink path loss computed in the device

MCC

serving cell(dB)

PDSCH BLER

MAC Throughput

(DL/UL) Path Loss

Physical Cell Identity of the serving cell

Description

Allowed Access EMM State EMM Substate Transmission Mode (DL/UL) Num of Antenna(Tx/Rx)

Channel

number

and

Frequency(MHz)

the

device is selecting Bandwidth assigned(MHz) Band Indicator in LTE Tracking Area Code which the current eNB belongs to E-UTRAN Cell Identifier for the serving cell Allowed Access on the cell based on network select mode Indicated by NAS Current EPS Mobility Management State Current EPS Mobility Management Substate Transmission mode in DL and UL Number of antenna being used currently

Throughput measured in MAC layer.


Page 134


A

Appendix : RTP Analysis in VoLTE

ppendix: RTP Analysis in VoLTE

Audio and Video stream are sent through RTP protocol.


Page 135


Appendix: RTP Analysis in VoLTE

The following items will be calculated by decoding RTP packets and calculating the methods mentioned. They will calculate every packet received and display every second in XCAL-Mobile. Parameter Rx Delay

Description Time difference of RTP timestamps from previous RTP packet and current RTP packet Rx Delay = R(i) – R(i-1)

Inter Arrival time Difference

It is the time difference in relative transit time expressed as D(i, j) = {R(i) – R(i-1)} – {S(j) – S(i-1)} Here, S(j) is the RTP timestamp from packet j sent and R(i) is the RTP timestamp from packet i received

Inter-Arrival Jitter

It is calculated over packets that arrived consecutively as follows. If J(i) represents the Inter-Arrival Jitter for packet, i and D (i – 1, i) represents Inter-Arrival Time Difference between consecutive packets, i – 1 and i, then Inter-Arrival Jitter is calculated as,

Jitter value for the first packet is considered zero. It is calculated at every packet and averaged over one second. Loss Packet Packet Loss Rate

The number of packets lost. RTP Sequence Number helps detect packet losses. It is calculated as,

. It is calculated at every second. RTP Throughput

Over DL, the throughput is measured as,

It is calculated at every second.


Page 136

© Copyright by Accuver Co., Ltd.

Page 137

XCAL-Auto Mobile_User Guide v4 7 Xx (Rev0)_140305_F_APAC_RJIL

Recommend Documents