NEMA

2006 Electrical Standards & Product Guide

Cooper Lighting manufacturess lighting manufacture fixtures and related products for indoor and outdoor use.

Cooper Crouse-Hinds makes electrical products designed to protect personnel and electrical systems in hazardous, commercial and industrial environments.

Cooper Bussmann provides circuit protection and power management products designed to protect electrical and electronic systems.

Cooper Wiring Devices offers a complete line of wiring devices and accessories for distribution and management of electrical power.

Cooper Power Systems offers equipment, components and engineering services for the distribution and management of electrical power.

Cooper B-Line is a leading manufacturer of electrical and  telecommunications support systems and enclosures.

An Unsurpassed Selection of Innovative Products. Superior Customer Service. Manufacturing Excellence.

The Power Behind The Brands

TM

Cooper’ss pr Cooper’ produc oducts ts ar aree leade leaders rs in virtu virtually ally every market we serve. Customer Cust omerss re rely ly on Coop Cooper’ er’ss famil familyy of  well-known brands for unparalleled quality and reliability. For more more information, please visit our our website at www.c www.cooperindustries.co ooperindustries.com m

Cooper Lighting manufacturess lighting manufacture fixtures and related products for indoor and outdoor use.

Cooper Crouse-Hinds makes electrical products designed to protect personnel and electrical systems in hazardous, commercial and industrial environments.

Cooper Bussmann provides circuit protection and power management products designed to protect electrical and electronic systems.

Cooper Wiring Devices offers a complete line of wiring devices and accessories for distribution and management of electrical power.

Cooper Power Systems offers equipment, components and engineering services for the distribution and management of electrical power.

Cooper B-Line is a leading manufacturer of electrical and  telecommunications support systems and enclosures.

An Unsurpassed Selection of Innovative Products. Superior Customer Service. Manufacturing Excellence.

The Power Behind The Brands

TM

Cooper’ss pr Cooper’ produc oducts ts ar aree leade leaders rs in virtu virtually ally every market we serve. Customer Cust omerss re rely ly on Coop Cooper’ er’ss famil familyy of  well-known brands for unparalleled quality and reliability. For more more information, please visit our our website at www.c www.cooperindustries.co ooperindustries.com m

F R OM OM T H E P RE RE S I D E N T

M aki king ng elec lectt ri ric cal prod produc uctt s, and t he mark ma rket ets s in which which the t hey y are are s sold, old, mo more re eff ef f icient NEMA is pleased to present the 2006 edition of  the  Electrical Standards & Product Guide. More than 50,000 engineers, specifiers, and buyers of  electrical products make use of the guide to make sure that electrical installations perform safely and effectively effectively.. NEMA has been developing electrical industry standards for eight decades. NEMA will continue to play a critical role in promoting advanced technology, from medical imaging systems to traffic control systems, from homeland security devices to electrical applications of nanotechnology. n anotechnology. We We are indebted to the dedicated professionals who develop our industry standards. NEMA is increasingly moving into the the international marketplace. It is active in the International Electrotechnical Commission standards development and conformity assessment processes, attempting to facilitate the entry of NEMA products into markets across the globe. In the past few years, we have opened offices in Mexico, Brazil, and China, offering services to members selling product into these markets and working on behalf  of members to influence the standards development and regulatory processes in those countries. NEMA's government relations program works both domestically and internationally to remove trade and regulatory barriers to doing business. In China, which at the moment may hold the greatest opportunity for our our multinationals, multinationals, NEMA has been working diligently to level the competitive playing field and foster free and fair trade. Government relations achieved a great victory last year with the passage of the Energy Policy Act of  2005. The association was instrumental in the drafting of key portions of the bill, including one that requires the federal government to purchase NEMA Premium electric electric motors and Energy Energy Star labeled products, ensuring high performance and high energy efficiency at the same time.

NEMA

NEMA also helps helps its its members understand the markets via its a full-service economics and market research consulting shop, which has gained a reputation as a reliable, attractively priced provider of business information to the electroindustry.. Known as troindustry NEMA/BIS, it is uniquely positioned to fill the electroindustry's business information needs. It provides accurate and timely customized research, data collection, analysis, and forecasting to key decision-ma decisi on-makers kers in NEMA member companies— companies— from relatively small surveys to the complex forecasting casti ng models developed developed for NEMA produc productt groups. NEMA/BIS services are distinguished from the competition because they are designed to meet specific customer requirements, and employ a rigorous method of collecting accurate data, while maintaining the utmost confidentiality of company data. The Industry Data Exchange Association, IDEA, a joint venture venture between NEMA NEMA and the National Association of Electrical Distributors, is also contributing to an efficient marketplace by setting standards for e-commerce and providing the means by which those in the marketing channel can transact business in the most efficient, effective, and accurate manner possible. All told, NEMA continues to provide tremendous value to its members and the electrical manufacturing community. We We are here to serve.

Evan Gaddis President National Electrical Manufacturers Association

2005 EL ELECTRICAL ECTRICAL STANDARDS & PRODUCT GUI GUI DE

3

TABLE OF CONTENTS

2006 ELECTRI CAL STANDARDS & PRODUCT GUI DE NEMA Member Companies . . . . . . . . . . . . . . . . . .6 NEMA Board of Governors . . . . . . . . . . . . . . . . .12 Standards & Other Publications I ndex . . . . . . . . .14 Standards Listing . . . . . . . . . . . . . . . . . . . . . . . .24 Product Category I ndex . . . . . . . . . . . . . . . . . . .78 Products & Manufacturers . . . . . . . . . . . . . . . . .80 Adverti sers I ndex . . . . . . . . . . . . . . . . . . . . . . .130 I ndustry Resources . . . . . . . . . . . . . . . . . . . . . .131 Global Order Locations . . . . . . . . . . . . . . . . . . .132 Terms & Methods of Payment . . . . . . . . . . . . . .133 Publication Order Form . . . . . . . . . . . . . . . . . . .134

1300 North 17th Street Suite 1752 Rosslyn,Virginia 22209 (703) 841-3200 (703) 841-5900 FAX www.nema.org

4

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

NEMA

Going beyond the balance sheet.

The numbers on a balance sheet are a snapshot of a company’s financial position – and they’re important. But the heart and soul of company are its people, its products and services, the markets it serves, the customers it helps. In the last year alone, Hubbell people responded in the wake of Hurricanes Katrina and Rita with unprecedented urgency. They supported the recovery of vital energy resources, came to market with one of the largest new  product launches in company history – and much more. The way we see it, the numbers on our financial statements tell only part of the Hubbell story. The real story is what we do every day to achieve them. Visit us at www.hubbell.com

®

N M AI ON MEM BA ED R COMPANIES S E CT HE The National Electrical Manufacturers Association is the trade association of choice for the electrical manufacturing industry. Founded in 1926 and headquartered near Washington, D.C., its 430 member companies manufacture products used in the generation, transmission and distribution, control, and use of electricity. These products are 3M Electrical Products 3M Traffic Safety Systems A. B. Chance Company A.O. Smit h Electri cal Products Co. ABB Control, Inc. ABB Inc. ABB-Entrelec AC Data Systems Accurate Plastics, Inc. Acme Electric Corporation Acuity Lighting Group Adalet Advance Transformer Company Advanced I nstrument Development Inc. Advanced Lighting Technologies Inc. Advanced Protection Technologies AFC Cable Systems AGFA U.S. Healt hcare Aiphone Corporation Air Products and Controls Inc. Alara, Inc. Alcan Cable Alflex Corporation Allied Moulded Products, Inc. Allied Tube & Conduit Allied Tube & Conduit/Cope Aloka Co., Ltd Amercable American Cable Systems Ameri can Insulated Wire Corporation American Power Conversion Corp. Ameri can Signal Company Ametek Solidstate Controls Anamet Electri cal, Inc. Apcom, Inc. Apollo Fire Detectors Ltd. Appleton Electric Company Architectural Area Lighting AREVA T&D Arli ngton Industries, Inc. Ar ti culated Technologies, LLC ASCO Power Technologies Atkins & Pearce, Inc. Aurora Lighting Inc. Belden CDT, Inc. Berk-Tek a Nexans Company Biosound Esaote, Inc.

6

used in utility, medical, industrial, commercial, institutional, and residential applications. Domestic production of  electrical products sold worldwide exceeds $120 billion. In addition to its headquarters in Rosslyn, Virginia, NEMA also has offices in Beijing, São Paulo, and Mexico City.

Bodine Company, Inc. Boltswitch, Inc. Bosch Security Systems Bridgeport Fitt ings, Inc. Bridgeport I nsulated Wir e Company BRK Brands, Inc. Bryant Electric BSafe Electri x, Inc. Cable USA, Inc. Cablofil, Inc. California Linear Devices Camtronics Ltd Medical Systems CANTEX I NC. Capintec, Inc. CARLO GAVAZZI , INC. Carlon Caterpill ar, Inc. CCL I nc. Chalfant Manufacturing Company Champion Fiberglass, Inc. CMS, Inc. Coleman Cable, Inc. Colonial Wire & Cable Co., Inc. Color Kinetics Columbia Lighting Computerized Imaging Reference Systems, Inc. (CIRS) CONDUMEX Connector Castings, Inc. Connector Manufacturing Company Control Concepts Cooper B-Line Cooper Bussmann Cooper Crouse-Hinds Cooper Lighting Cooper Power Systems Cooper Wheelock Cooper Wiring Devices Cornell Communications, Inc. Cree Lighting Company Cummins, Inc. Curbell , Inc. Daktronics, Inc. Danaher Power Solutions Day-Brite Lighting DeJarnette Research Systems Dialight Corporation

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

Digir ad Corporation Draka USA, Inc. Dresser-Rand Company Dual-Lite DuPont Dura-Line Corporation Duracell , Inc. Durham Company Dynamic I maging, Inc. Eastman Kodak Company Eaton Electrical, Inc. Eberl e Design, Inc. Econolit e Control Products, Inc. EFI Electronics EGS Electrical Group EHV-Weidmann I ndustries, Inc. Elastimold Division Elecktrisola, Inc. Electra-Gear Electri-Cord Manufacturing Company Electri-Flex Company Electro Switch Corporation Elekta Inc. Elliott Company Elster Electricity Emerson Electric Company Emerson Motor Company Encore Wir e Corporation ERI CO, Inc. Ericson Manufacturing Company ESAB Welding Essex Group, Inc. Eveready Battery Company, Inc. EYE Lighting International of N.A., I nc. Fargo Manufacturing Company, Inc. Faxitron X-Ray Corporation FCI U.S.A. Inc. Federal Pacific Federal Signal Corporation Federal-Mogul Systems Protection Group Feit Electric Company, Inc. FERRAZ SHAWMUT Fiberoptic Display Systems, Inc. Figaro USA, Inc. Fike Protection Systems Fire Control I nstruments, Inc. Fire-Li te Alarms/Notifi er

NEMA

Delivering Innovation, Service and Success In 1994, when Eaton Corporation purchased the Westinghouse distribution and control business unit (DCBU) and merged it with its existing CutlerHammer business, the products, patents, and intellectual resources of the two electrical giants became one. Today, Eaton Corporation’s Electrical business is the industry leader in industrial control, automation, and electrical

distribution equipment and services; and is the only authorized service provider for Cutler-Hammer and Westinghouse DCBU products and systems. We are committed to forming powerful relationships with our customers, partnering with complementary businesses to increase delivered

solutions, expanding our distribution channel, and providing a convenient path to all of our solutions through our Internet site. When you need a leader who delivers, call on Eaton’s Electrical business. www.EatonElectrical.com

N E M A M E M B ER COM PA N I E S

Firetrol, Inc. Fir st Technology, Inc. Fisk Alloy Conductors, Inc. Fluke Biomedical Fonar Corporation Formica Corporation FRE Composites Corporation Fujifil m Medical Systems U.S.A., Inc. Fukuda Denshi G & W Electric Company Galvan Industries, Inc. Gamma Medica, Inc. GE Consumer & Industr ial GE Consumer & Industrial, Lighting GE Consumer & Industrial, Lighting Systems GE Healthcare GE Security, Inc. GE Total Lighting Control GELcore LLC General Cable Genlyte Group LLC Gentex Corporation Gilbert Industries, Inc. Glastic Corporation Grady Research, Inc. GrafTech International Limited Graphite Metallizing Corporation GS Metals Corporation Hadco Lighting Halco Lighting Corporation Hammond Power Solutions, I nc. Harbour Industries, Inc. Harrington Signal, Inc. HBD Industries, Inc. Heritage Plasti cs South, Inc. Hilec LLC Hil l-Rom Company, Inc. Hitachi Medical Systems America, Inc. Hoffman Enclosures Inc. Holophane An Acuity Brands Company Homac Manufacturing Company Honeywell Electronics & Lighting Honeywell , Inc. Honeywell , Inc. Home & Building Controls Howell Electric Motors Hubbell Building Automation, Inc. Hubbell Incorporated Hubbell Lighting, Inc. Hubbell Power Systems, Inc. Hubbell Wiegmann Hubbell Wiring Device-Kellems Hypertherm Incorporated

8

iCAD, Inc. IDX Systems Corporation IGC-Medical Advances Inc. ILNorplex, Inc. ILSCO Corporation Image Sensing Systems Imaging Diagnosti c Systems, Inc. IMPAC Medical Systems, Inc. Imperial Electric Company Indy Lighting, Inc. Innovative Paper Technologies, LLC Intelligent Devices, Inc. International Metal Hose Company Interpower Corporation Invensys Climate Controls Ameri cas (Maple Chase Co.) IPEX Inc. IS2 Medical Systems Inc. Iten Industries Iteris Itron Electricity Metering, Inc. ITT VEAM, LLC IW High Performance Conductors, Inc. J-M Manufacturing Company, Inc. John C. Dolph Company Johnson Controls, Inc. Joslyn Clark Controls, Inc. Judd Wir e, Inc. Juno Lighting Inc. K-Line Insulators USA Inc. Kaneka High-Tech Materials, Inc. Kentucky Association of Electric Cooperatives, Inc. Kidde-Fenwal, Inc. Killark Electric Mfg. Company Kim Lighting Kodak Batteri es, Eastman Kodak Company Konica Minolta Medical Imaging USA, Inc. Lamina Ceramics, Inc. Lamson & Sessions LAP of America L.C. LAPP Insulator Company, LLC Lectromat, Inc. LEESON Electric Corporation Leoni Wire, Inc. Leviton Manufacturing Co., Inc. Liebert Corporation Light Sources Inc. Lightolier Lincoln Electric Lincoln Motors

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

Lindsey Manufacturing Company Li thonia Lighting Littelfuse, Inc. Locke Insulators, I nc. Lorad, A Hologic Company Lumileds Lighting, LLC Lutron Electronics Company, Inc. MacLean Power Systems Marathon Electric Manufacturing Corporation Master Control Systems, Inc. McCain I nc. McKesson Medical Imaging Group Medison Co., Lt d Meltric Corporation Merge Healthcare Meter Devices Company, Inc. Metron, Inc. MGE UPS Systems, Inc. MGM Transformer Company Milbank Manufacturing Company Mil ler El ectri c Manufacturing Co. Minerallac/Cully Mitsubishi Electri c Automation, Inc. Mi tsubishi Electric Power Products, Inc. Moeller Electric Corporation MP Husky Corporation MWS Wire Industries National Cathode Corp. National Time & Signal Corporation Nexans Canada Inc. Nexans Magnet Wire USA I nc. NGK-LOCKE Polymer Insulators, Inc. Niagara Transformer Corporation Nucletron Corporation O-Z/Gedney Ohio Brass Company Ohio Electri c Motors, Inc. Omron Electronics LLC OSRAM Opto Semiconductors I nc. OSRAM SYLVANI A El ectronic Control Systems OSRAM SYLVANI A General Lighting P-W Industries, Inc. Panasonic Corporation of North America Panasonic I ndustri al Company Panduit Corporation Panolam Industr ies Pass & Seymour/Legrand Pauwels Transformers PCI Lighting Controls, Inc. Pedersen Power Products Peek Traffic Corporation

NEMA

SPEND LESS TIME INSIDE THE BOX. AND GET BACK IN THE GAME.

Reduce branch circuit make-up time by up to 30% with UL-listed, NEC-compliant MC AP  .

TM

Don’t be penalized for using conventional cable. Get MC AP  , a patented Southwire innovation. It can save you hundreds of hours and thousands of dollars on every job. How? With MC AP  the ground conductor is built into the armor, eliminating ground make-up in the box. So all you have to do is run the cable, cut off the aluminum ground at the armor, and you’re out.

Now in convenient, contractor-friendly packaging.

To try it — and experience life outside of the box — call 800-613-7082 or go to www.southwire.com.

Save installation time – every box, every outlet, every time. The MC AP  Way The Old Way

N E M A M E M B E R COM PA N I E S

Peerless Electric Peerl ess-Winsmith, Inc. Penn Panel & Box Company Philips Lighting Company Philips Medical Systems, N.A. Phoenix Contact, Inc. Phoenix Data Communications Inc. Picoma Industries, Inc. Post Glover Resistors, Inc. Power Controls Incorporated Powertec Industrial Motors, Inc. Prescolit e, Inc. Producto Electric Corporation Progress Lighting Progressive Machine Die, Inc. Quallion LLC Quirk Wire Company, Inc. R2 Technology, Inc. RACO Radionic Industries, Inc. Radix Wire Company RAM Industries Rauland-Borg Corporation Rea Magnet Wire Company, Inc. Regal Manufacturing Regal Sleeving and Tubing, LLC Regal-Beloit Corporation Reliance Controls Corporation RENATA SA Republic Conduit Reuel, Inc. Rittal Corporation Riverain Medical Robertson Worldwide Robroy Industries, Inc. Rockbestos-Surprenant Cable Corporation Rockwell Automation Russelectric, Inc. Ruud Lighting Inc. S & C Electric Company Safetran Traffic Systems, Inc. Safety Technology International, Inc. SAFT America, Inc. Schneider Automation, Inc. SDi LLC Sectra Imtec AB Sensata Technologies Sentinel Lighting Service Wire Company

10

SEW-Eurodrive, Inc. Shamrock Conduit Products, Inc. Shimadzu Medical Systems Showa Denko Carbon, I nc. Sicame Corporation Siemens Buil ding Technologies, Inc. Siemens Energy & Automation, Inc. Siemens ITS Siemens Medical Solutions USA, Inc. Siemens Molecular Imaging Siemens Power Transmission & Distri bution, Inc. SimplexGrinnell LP SLi Lighting Sofanou Inc. Sola/Hevi-Duty Sonora Medical Systems SonoSite, Inc. South Atlantic, LLC Southern Pipe, Inc. Southwir e Company Spaulding Lighting, Inc. Specialty Cable Corporation Spectrum Brands, Inc. Sprecher & Schuh, Inc. Square D Company Steel Cit y Steel El ectric Products Co., Inc. Sterling Electric, Inc. Sterner Lighting Systems, Inc. Stryker Medical Sumit omo El ectric Interconnect Products, Inc. Superior Graphite Company System Sensor/Honeywell Fire Solutions Group Systematics Technology Research Corporation TECO-Westinghouse Motor Company Tektone Sound & Signal Mfg. I nc. Tel-Tron Technologies Corporation The Monroe Cable Company, Inc. The Okonite Company The P.D. George Company The Phantom Laboratory The Pringle Electri cal Mfg. Company Therm-O-Disc Thomas & Betts Corporation Thor Systems, Inc.

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

TI R Systems Ltd. TomoTherapy, Incorporated TomTec Corporation Torna Tech Inc. Toshiba Ameri ca Medical Systems Inc. Toshiba International Corporation Total Control Products, Inc. Tower Manufacturing Corporation Toyoda Gosei North America Corporation Transtector Systems, Inc. Tuthill Energy Systems Tyco Electronics/AMP Tyco Electronics/Raychem Wire & Cable U. S. Electrical Motors U.S.Traffic Ultraguard Corporation Ultrasonix Medical Corporation Underground Devices, Inc. Unit ed Copper I ndustr ies United Fiberglass of America, Inc. Universal Lighting Technologies Ushio America, Inc. UTC Power VanTran I ndustries, Inc. Varian Medical Systems, Inc. Venture Lighting I nternational Venture Lighting Power Systems Viakable, S.A. de C.V. Vigil Healt h Solutions Inc. Vision Fire & Security Von Roll Isola USA, Inc. W.T. Storey Inc. WAGO Corporation Watt Stopper, Inc. WEG Electric Motor Corp. Weidmuller Inc. Welch Allyn, Inc. Western Tube & Conduit Corporation Westinghouse Lighting Corporation Wheatl and Tube Company White-Rodgers Wide-Lite Wilson Greatbatch Ltd. Wilsonart International, Inc Wiremold/Legrand Yaskawa Electric America, Inc. Zonare

NEMA

S0E0CT 2 6 INON EMA H EBAODA R D O F G O V E R N O R S CHAIRMAN TI MOTHY H. POWERS Chairman, President & CEO Hubbell I ncorporated Orange, Connecticut

JAMES DAVIS Vice President, U.S. Diagnostic I maging Commercial Organization GE Healthcare Waukesha,Wisconsin

VICE CHAIRMAN JOHN W. ESTEY President & CEO S&C Electric Company Chicago, I llinois

BRIAN DUNDON President & CEO Advance Transformer Company Rosemont, Illinois

VICE CHAI RMAN LARRY POWERS Chairman, President & CEO Genlyte Group LLC Louisville, Kentucky

DAVI D FI TZGI BBON President & CEO I LSCO Corporation Cincinnati, Ohio

JEAN-PAUL MONTUPET Executive Vice President Emerson Electric Company St. Louis, Missouri JOHN MORGAN President & CEO Acuity Lighting Group Atlanta, Georgia DEL NICKEL President Hoffman Enclosures Inc. Anoka, Minnesota

KI RK HACHI GI AN President & CEO Cooper I ndustries, I nc. Houston, Texas

DAVID D. PETRATIS CEO & President Schneider Electric, Schneider North American Operating Division Palatine, I llinois

DONALD HENDLER President Leviton Manufacturing Co., I nc. Little Neck, New York

DOMINIC PILEGGI President & CEO Thomas & Betts Corporation Memphis, Tennessee

CHARLIE JERABEK President & CEO OSRAM SYLVANI A Danvers, Massachusetts

ENRI QUE SANTACANA President ABB Power Technologies NA Norwalk, Connecticut

WILLIAM BOEHM CEO & Chairman of the Board Connector Manufacturing Company Hamilton, Ohio

GREGORY KENNY President & CEO General Cable Highland Heights, Kentucky

JOHN SELLDORFF President & CEO Legrand North America West Hartford, Connecticut

JAMES P. CAMPBELL President & CEO GE Consumer & I ndustrial Louisville, Kentucky

HAROLD LEVI TON Chairman of the Board & CEO Leviton Manufacturing Co., I nc. Little Neck, New York

STUART THORN President & CEO Southwire Company Carrollton, Georgia

RICHARD COUCH CEO Hypertherm Incorporated Hanover, New Hampshire

JOHN LONGENDERFER President & CEO Lutron Electronics Company, Inc. Coopersburg, Pennsylvania

GORDON THURSFI ELD President Nexans Canada Inc. Markham, Ontario

TED CRANDALL Senior Vice President, Components & Packaged Applications Group Rockwell Automation Milwaukee, Wisconsin

AUBERT MARTIN President & CEO Siemens Energy & Automation, Inc. Alpharetta, Georgia

R. CHARLES VERMERRIS President & CEO Radix Wire Company Euclid, Ohio

TREASURER JOHN STROPKI Chairman, President & CEO Lincoln Electric Cleveland, Ohio I MMEDIATE PAST CHAIR RANDY CARSON Group President Eaton Corporation Eaton Electrical Moon Township, Pennsylvania

PETER MCI LROY Chairman & CEO Robroy I ndustries, I nc. Verona, Pennsylvania

12

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

NEMA

YOU NEED TO MEET SAFETY REGULATIONS AND INCREASE PRODUCTIVITY. OUR EXPERTISE AND SOLUTIONS MAKE THAT VISION POSSIBLE.

 Safety and productivity can work hand in hand. Integrating safety control with your information system means control,

configuration, and data collection can run on a single architecture. You save time, get more information, and enhance

 your safety environment. Think what integrated safety can do for you. www.RockwellAutomation.com/think/safety.

 For your free copy of  Safety Now  , subscribe at www.ab.com/safety.

Copyright © 2006 Rockwell Automation, Inc. All Rights Reserved. AD CIG1910-R1P

S EA ST CT N IDA ONR DS H E A&DOT H E R P U B L I CA T I ON S I N D E X This index is a quick reference guide to all of the standards available from NEMA, including certain ANSI standards. It notes the latest version available, the price, and the page number on which you will find the title and a short description of the document, as well as companion standards and notices of approval or adoption by other organizations. At least every five years, each NEMA standard is reviewed for timeliness, technical accuracy, and relevance. The dates of the reviews are published as part of the alpha-numeric standard identifier. Revisions published for NEMA standards are made available for holders of the base standard at a nominal price. The revision is automatically included in the base standard for future users and the price of the standard (base and revisions) is adjusted. When a NEMA standard is purchased through IHS/Global Engineering Documents, the customer will be sent notification of the standard’s revision.

PRODUCT CATEGORY

PAGE

Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Batteries, Dry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Busway, Conduit, Raceways. . . . . . . . . . . . . . . . . . . . 26 Capacit ors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Carbon/Manufactured Graphite Products. . . . . . . . . . 32 Communications & Signaling Equipment . . . . . . . . . . 32 Conduit & Duct, Electri cal . . . . . . . . . . . . . . . . . . . . 32 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DICOM Publications. . . . . . . . . . . . . . . . . . . . . . . . . 64 Distri bution Equipment . . . . . . . . . . . . . . . . . . . . . . . 34 Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Fire Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 General I nterest . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Government . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 I ndustrial Control & Automation Systems . . . . . . . . . 40 I nsulating Products. . . . . . . . . . . . . . . . . . . . . . . . . . 46 I nternational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Measuring Equipment, Electrical . . . . . . . . . . . . . . . . 62 Medical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Motors & Generators . . . . . . . . . . . . . . . . . . . . . . . . 67 National L ighting Bureau Publications . . . . . . . . . . . 50 Outlet & Swit ch Boxes . . . . . . . . . . . . . . . . . . . . . . . 68 Pin & Sleeve Plug, Receptacle, & Connectors . . . . . . 68 Power Conversion Equipment . . . . . . . . . . . . . . . . . . 69 Protective Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Residential Controls . . . . . . . . . . . . . . . . . . . . . . . . . 69 Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Steam Turbines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Transformers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Transportation Management Systems . . . . . . . . . . . . 72 Wire & Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Wiring Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

14

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

PAGE

PRICE STANDARD

38

A Brief Compari son of NEMA 250 and I EC 60529

32

Annul ar Space Pr ot ect ion of Openi ngs Cr eat ed by Penetrations of Tubular Steel Conduit, A Review of UL Special Service Investigation, Fil e NC 546, Project 90NK11650

67

$97.00 Application Guide for AC Adjustable Speed Drive Systems

77

$57.00 Application Guide for Isolated Ground Wiring Devices

26

Conduit-I n-Casing Construction

40

$205.00 Electrical Installation Requirements: A Global Perspective

48

$65.00 Electrical Product Acceptance in Europe: NEMA Guide to New Approach Directives and CE Marking

40

Envi ronment al I mpact Analysi s: Spent Mercur yContaining Lamps

26

Expansi on Joi nt s for PVC Ri gi d Nonmet al li c Condui t

51

Fl uorescent Lamps and the Envi ronment

67

$38.00 General Specification for Consultants, Industrial and Municipal: NEMA Premium Efficiency Electri c Motors (600 Volts or Less)

51

$27.00 Getting the Most from Your Lighting Dollar (Third Edition)

40

$37.00 Guide for Proper Use of Smoke Detectors in Duct Applications

40

$50.00 Guide for Proper Use of System Smoke Detectors

51

$29.00 Guide to Energy-Efficient Lighting Systems

51

$27.00 Guide to Industrial Lighting

51

$27.00 Guide to Office Lighting and Productivity

40

$50.00 Guide to Preparing a Design Proposal for Paralleling Customer Generation with an Electric Utility

50

$27.00 Guide to Retail Lighting Management (Third Edition)

70 40

Gui del ines for Handl ing Wat er Damaged El ect ri cal Equipment $45.00 M aps and Di rect or ies

70

Meet Mr. Ouch

40

NEM A Anal ysi s of the Ener gy Poli cy Act of 1992: The Scope of Electric Motors Subject to Efficiency Standards on October 24, 1997

16

$23,997.00 NEMA Complete Set

51

$27.00 NEMA Guide to Lighting Controls

32

$85.00 NEMA Installation Guide for Nurse Call Systems

NEMA

I need 40 products on three sites in 24 hours. I need tough enclosures that are kind to my wallet. I need labor-saving features that make installations easier and quicker. I need Hoffman.

When you’re juggling multiple projects, deadlines and budgets, one choice makes it simple: Hoffman.  You live by the clock and the bottom line. So turn to someone who’ll get it right the first time. Hoffman offers: The industry’s widest selection of enclosures, wireway, cabinets, racks and more. n Fast ordering and local availability thanks to our national network of 2,500 distributors. n A wider range of sizes, lengths and styles for standard products. n Extensive Modification Services to guarantee a perfect fit. n Faster, easier installations thanks to labor-saving new features and products. n Confidence, knowing that all Hoffman products meet industry codes. n

With Hoffman sweating the details, you can watch what really matters—dollars and deadlines.

www.hoffmanonline.com/const 

Hoffman. What your work demands. ©2006 Hoffman Enclosures Inc.

P U B L I CA T I ON S I N D E X

51

$27.00 Per for mi ng a L ight ing System Audit (Revised)

50

$46.00 BL 1-1997 (R2002)

69

$63.00 FU 1-2002

26

$885.00 BU 1-2002

69

$56.00 GR 1-2005

50

$27.00 Pr ofi ti ng f rom L ight ing Modernization

26

$49.00 BU 1.1-2005

74

$51.00 ANSI /NEMA HP 3-2001

26

$49.00 BU 1.1-2005 ( Spani sh)

74

28

$51.00 BU 1.2-2002

$45.00 ANSI /NEMA HP 4-2000 (R2005)

28

$0.00 Bulletin 5RN 2189

74

$126.00 HP 100-1991 (R1999, R2005) Series (HP 100-100.4)

48

$48.00 HV 2-1991 (R1996, R2002)

38

32

70 26

48

32

50

38

Quality Informational Guide for Automatic Fire Detection and Alarm Systems Report of Research on Electrical Metallic Tubing for Use Over 600 Volts Safety Guide for Use of Extension Cords Solvent-Cementing Joints for PVC Rigid Nonmetallic Conduit , Duct, and Fittings The Declining Presence of Mercury in Batteries and Municipal Solid Waste The Grounding System that Works--Steel Conduit (EMT, IMC, and Galvanized Rigid) $50.00 The I nt ernat ional Electrotechnical Commission and the U.S. National Commit tee of the IEC (USNC/IEC)-A Practical Guide $57.00 Tr ai ni ng M anual on Fi re Alarm Systems 2003

32

$139.00 CB 1-2000

32

$75.00 ANSI /NEMA CC 1-2005

32

$51.00 CG 1-2001

32

$55.00 CG 2-2004

40

$61.00 I A 2.1-2005

31

$70.00 CP 1-2000

41

$128.00 I A 2.2-2005

69

$47.00 DC 3-2003

41

$170.00 I A 2.3-2005

69

$38.00 DC 5-2002

41

$133.00 I A 2.4-2005

70

$42.00 DC 10-1983 (R1989, R2003)

41

$114.00 I A 2.5-2005

41

$128.00 I A 2.7-2005

70

$42.00 DC 12-1985 (R1991, R1997, R2002)

41

$114.00 I A 2.8-2005

70

$35.00 DC 13-1979 (R1985, R1991, R1997, R2002)

41

$104.00 I CS 1-2000 ( R2005)

41

70

$47.00 DC 20-1992 (R2003)

$32.00 I CS 1.1-1984 ( R1988, R1993, R1998, R2003)

62

$76.00 EI 21.1-1993 ( R2002)

42

$31.00 I CS 1.3-1986 ( R2001)

62

$36.00 EI 21.2-1991 (R1997, R2002)

42

$108.00 I CS 2-2000 ( R2005)

42

$63.00 I CS 2, Par t 9-2002

50

$58.00 EM 1-2002

42

$48.00 I CS 2.3-1995 ( R2002)

24

$43.00 EW 1-1988 (R1994, R1999, R2004)

42

$58.00 I CS 2.4-2003

42

$61.00 I CS 3-2005

24

$29.00 EW 3, Revision 1

42

$38.00 I CS 3.1-1997 ( R2003)

24

$32.00 EW 3-1983 (R1995, R1999, R2002)

42

$63.00 I CS 4-2005

32

Tubular Steel Conduit

64

Type "2" Motor Starter Protection Fuse Guide

42

$146.00 I CS 5-2005

24

$94.00 EW 4-1993 (R1999)

44

$46.00 I CS 5, Annex B-2002

User Guide to Product Specifications for Electrical Building Wire and Cable

24

$50.00 EW 6-1998

44

$46.00 I CS 5, Annex E-2002

28

$72.00 ANSI /NEMA FB 1-2003

44

$46.00 I CS 5, Annex F-2002

28

$52.00 FB 2.10-2003

74

44

$42.00 I CS 6-1993 ( R2001)

38

$63.00 250-2003

28

$78.00 FB 2.20-2003

44

$61.00 I CS 7-2006

71

$38.00 260-1996 (R2004)

68

$50.00 FB 11-2000

44

$61.00 I CS 7.1-2006

50

$63.00 NEMA 410-2004

28

$50.00 FG 1-1993

44

$126.00 ANSI /NEM A I CS 8-2000 (R2005)

34

$1,062.00

AB 1-2002

48

$78.00 ANSI /NEMA FI 1-2004

34

$76.00 AB 3-2001

48

$40.00 FI 2-1992 ( R1999, R2005)

44

$56.00 I CS 10-2005, Par t 1

34

$63.00 AB 4-2003

48

$46.00 ANSI /NEMA FI 3-2004

44

$56.00 I CS 10-2005, Par t 2

44

$77.00 I CS 12.1-1997

46

$58.00 I CS 14-2004

46

$55.00 I CS 15-2004

46

$198.00 I CS 16-2001

46

$62.00 I CS 18-2001

46

$72.00 I CS 19-2002

46

$119.00 ANSI/NEMA ICS 61800-12002

46

$113.00 I CS 61800-2-2005

46

$133.00 I CS 61800-4-2004

34

$92.00 KS 1-2001

69

$32.00 LA 1-1992 (R1999)

48

$100.00 ANSI /NEM A L D 3-2005

COMP LETE SET OF NE MA STANDARDS The complete set of all NEMA standards is available at a discount. The set is shipped unassembled and includes all standards that are available at the time the order is processed and seven binders to accommodate all of the standards. Standards that have been rescinded are not included. All new and revised standards which have been approved since the publication of this catalog will be included. Price: $23,997.00

16

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

NEMA

Square D® Products

Can your choice of an electrical system impact your business?

Absolutely, when you’re powered by the Square D ® brand. For the past 100 years, Square D products have raised the bar, making them the preferred brand among contractors. From residential load centers and metering products to commercial panelboards, dry transformers and safety switches, Square D products provide you with quality solutions for distributing electrical power. It’s more than an electrical system. It’s the backbone of your customers’ homes and mission critical to their businesses. Turn Reliability On.

Call our Customer Information Center at 1-888-SquareD (1-888-778-2733), or visit www.us.squared.com.

P U B L I CA T I ON S I N D E X

NETWORK PRI CI NG The standards listed below are available on CD for standalone use and licensed use over a local area network (L AN).

50

$40.00 LE 4-2001

73

$50.00 NTCI P 2202:2001

50

$46.00 LE 5-2001

73

$47.00 NTCI P 2301:2001

50

$50.00 LE 5A-1999

73

$32.00 NTCI P 2302:2001

50

$32.00 LE 5B-1998

73

$38.00 NTCI P 2303:2001

48

$191.00 L I 1-1998

73

$56.00 NTCI P 2304:2002

48

$58.00 L I 6-1993 ( R1999, R2005)

73

$32.00 NTCI P 8003:2001

50

$37.00 LL 7-2006

64

$78.00 NU 1-2001

69

$32.00 LS 1-1992 (R2000)

64

$62.00 NU 2-2001

67

$236.00 ANSI /NEM A M G 1-2003

64

$63.00 NU 3-2004

67

$236.00 ANSI /NEM A M G 1-2003 (CD)

68

$119.00 ANSI /NEM A OS 1-2003

68

$72.00 ANSI /NEM A OS 2-2003

67

$85.00 M G 1 Condensed-2002

68

$72.00 OS 3-2002

68

$57.00 MG 10-2001

NEMA MG 1 CD

$236.00

34

$59.00 PB 1-2006

68

$32.00 MG 11-1977 (R1997, R2001)

36

$31.00 ANSI /NEM A PB 1.1-2002

NEMA MG 1 CD 1 user

$290.00

68

$85.00 M G 1-2003, Revi sion 12004

36

$28.00 PB 1.1-2002 ( Spani sh)

36

$59.00 PB 2-2006

NEM A M G 1 CD 2-5 user s

$410.00

68

$63.00 MG 2-2001

36

$31.00 ANSI /NEM A PB 2.1-2002

68

$42.00 MG 3-1974 (R1995, R2000, R2005)

36

$32.00 PB 2.1-1996 ( Spani sh)

36

$72.00 PB 2.2-2004

NEMA MG 1 CD 6-10 users NEMA MG 1 CD 11-20 users

$620.00 $970.00

NEMA MW 1000 CD

$160.00

NEM A M W 1000 CD 1 user

$200.00

NEMA MW 1000 CD 2-5 users

$280.00

NEMA MW 1000 CD 6-10 users $420.00 NEMA MW 1000 CD 11-20 users $660.00

ANSI Z535 SERI ES CD

$367.00

ANSI Z535 SERIES CD 1 user

$450.00

ANSI Z535 SERI ES CD 2-5 users$630.00 ANSI Z535 SERI ES CD 6-10 users $960.00 ANSI Z535 SERI ES CD 11-20 users $1,510.00

18

63

$43.00 MS 1-2001

40

$47.00 PDD 04.02.00

63

$46.00 MS 2-2003

69

$38.00 PE 1-2003

64

$46.00 MS 3-2003

69

$54.00 PE 5-1997 (R2003)

64

$42.00 MS 4-2006

69

$54.00 PE 7-1997 (R2003)

64

$51.00 MS 5-2003

64

$999.00 PS 3 2006 Set

64

$35.00 MS 6-1991 ( R2000)

64

$56.00 PS 3.1-2006

64

$60.00 MS 8-1993 ( R2000)

64

$177.00 PS 3.2-2006

64

$54.00 MS 9-2001

64

$288.00 PS 3.3-2006

64

$49.00 MS 10-2006

65

$176.00 PS 3.4-2006

74

$43.00 MW 750-1996 ( R2001)

65

$107.00 PS 3.5-2006

74

$58.00 MW 765-2003

65

$100.00 PS 3.6-2006

74

$37.00 MW 780-2005

65

$121.00 PS 3.7-2006

74

$37.00 MW 785-2000

65

$75.00 PS 3.8-2006

74

$35.00 MW 790-2000

65

$61.00 PS 3.10-2006

75

$160.00 ANSI /NEMA MW 10002003, Revision 1, 2005

65

$82.00 PS 3.11-2006

65

$75.00 PS 3.12-2006

75

$160.00 ANSI /NEMA MW 10002003, Revision 1, 2005 (CD)

65

$75.00 PS 3.14-2006

65

$88.00 PS 3.15-2006

65

$248.00 PS 3.16-2006

66

$176.00 PS 3.17-2006

66

$56.00 PS 3.18-2006

48

$141.00 RE 2-1999

28

$37.00 RN 1-2005

28

$38.00 RN 2-1987 (R1992, R2001)

28

$43.00 RN 3-1991 (R2002)

75

$63.00 RV 1-2004, Revi sion 1

75

$58.00 RV 2-2005

32

$32.00 SB 10-1991 ( R1998, R2005)

32

$74.00 SB 28-1992 ( R1997, R2003)

40

NS 1-2005

72

$74.00 NTCI P 1101:1996

72

$84.00 NTCI P 1201:1996

72

$112.00 NTCI P 1202: 1996

72

$87.00 NTCI P 1203:1997

72

$58.00 NTCI P 1204:1998

72

$58.00 NTCI P 1205:2001

73

$112.00 NTCI P 1207: 2001

73

$38.00 NTCI P 2101:2001

73

$61.00 NTCI P 2102:2003

73

$69.00 NTCI P 2103:2003

73

$69.00 NTCI P 2104:2003

73

$61.00 NTCI P 2201:2003

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

NEMA

W E’R E C O M M I T T E D T O T H E F U T U R E O F W E L D I N G IN

F A C T,

W E ’R E

INVEN TING

IT

RIGHT

N OW 

Some say welding is a static industry –  that there’s nothing to learn about joining metal with metal. But at Lincoln Electric, we think there will always be new ways to improve productivity. That’s why we spend more on research and development  than any other company in welding. Our view is long range: we plan to stay No. 1 in arc welding and cutting. And we’ll keep inventing the new technologies that drive your business forward.

AR02-5

www.lincolnelectric.com

P U B L I CA T I ON S I N D E X

32

$56.00 SB 30-2005

36

$63.00 SG 4-2000 (R2005)

75

$98.00 ANSI /NEMA WC 57/I CEA S-73-532-2004

63

$49.00 ANSI C12.9-2005

63

$72.00 ANSI C12.10-2004

$138.00 WC 58-1997/ICEA S-75381 (R2005)

63

$177.00 ANSI C12.11-1987 (R1993, R2002)

71

$54.00 SM 23-1991 (R1997, R2002)

76

71

$70.00 SM 24-1991 (R1997, R2002)

76

$44.00 ANSI /NEMA WC 61-2005

63

76

$50.00 ANSI C12.18-1996 (R2002)

$43.00 ST 1-1988 (R1994, R1997)

$32.00 WC 62-1992 (R1999, R2004)

63

$155.00 ANSI C12.19-1997

76

$69.00 WC 63.1-2005

63

$58.00 ANSI C12.20-2002

71

$59.00 ST 20-1992 (R1997)

76

$31.00 WC 63.2-1996 ( R2003)

63

$87.00 ANSI C12.21-1999

28

$58.00 TC 2-2003

76

$37.00 WC 65-1995 (R2003)

24

30

$58.00 TC 3-2004

76

$60.00 ANSI /NEMA WC 66-2001

24

30

$58.00 TC 6&8-2003

76

$61.00 ANSI /NEMA WC 67-2005

$82.00 ANSI C18.1M, Par t 12005

30

$49.00 TC 7-2005

76

$51.00 TC 9-2004

$130.00 ANSI /NEMA WC 701999/I CEA S-95-658-1999

24

30

$65.00 ANSI C18.1M, Par t 22=2003

30

$49.00 TC 13-2005

76

26

30

$699.00 TC 14-2002

$109.00 ANSI /NEMA WC 711999/I CEA S-96-659-1999

$72.00 ANSI C18.2M, Par t 12003

30

$38.00 TC 18-2004

76

$34.00 WC 72-1999 (R2004)

26

$62.00 TC 19-2001

$40.00 WC 73-2000 (R2005)

$36.00 ANSI C18.2M, Par t 21999

30

77

$38.00 TCB 2-2000

77

$130.00 WC 74-2000/ICEA S-93639

26

30

$69.00 ANSI C18.3M, Par t 12005

30

$54.00 TCB 3-2001

77

$40.00 TF 1-1993 (R2000, R2005)

$75.00 ANSI /NEMA WC 275002005

26

48

$65.00 ANSI C18.3M, Par t 22003

77

$28.00 WD 1-1999 (R2005)

46

$46.00 ANSI C29.1-1988 ( R2002)

48

$40.00 TF 2-1993 (R2000, R2005)

77

$138.00 ANSI /NEM A WD 6-2002

46

$46.00 ANSI C29.2-1992 ( R1999)

77

$32.00 WD 7-2000 (R2005)

46

$36.00 ANSI C29.3-1986 ( R2002)

66

$50.00 XR 5-1992 (R1999)

47

$36.00 ANSI C29.4-1989 ( R2002)

66

$32.00 XR 7-1995 (R2000)

47

$36.00 ANSI C29.5-1984 ( R2002)

66

$31.00 XR 9-1984 (R1994, R2000)

47

$36.00 ANSI C29.6-1994 ( R2002)

47

$40.00 ANSI C29.7-1996 ( R2002)

66

$35.00 XR 10-1986 (R1992, R1998)

47

$36.00 ANSI C29.8-1985 ( R2002)

47

$36.00 ANSI C29.9-1983 ( R2002)

66

$48.00 XR 11-1993 (R1999)

47

66

$32.00 XR 13-1990 (R1995, R2000)

$36.00 ANSI C29.10-1989 (R2002)

48

66

$32.00 XR 14-1990 (R1995, R2000)

$36.00 ANSI C29.11-1989 (R1996)

48

66

$36.00 XR 15-1991 (R1996, R2001)

$31.00 ANSI C29.12-1997 (R2002)

48

$38.00 ANSI C29.13-2000

67

$38.00 XR 16-1991 (R1996, R2001)

48

$51.00 ANSI C29.17-2002

67

$37.00 XR 17-1993 (R1999)

48

$52.00 ANSI C29.18-2003

67

$48.00 XR 18-1993 (R1999)

36

$50.00 ANSI C37.50-1989 (R1995, R2000)

67

$49.00 XR 19-1993 (R1999)

36

$52.00 ANSI C37.51-2003

67

$48.00 XR 21-2000

38

$72.00 ANSI C37.54-2002

3

$65.00 ANSI C37.55-2002

ANSI STANDARDS

38

$67.00 ANSI C37.57-2003

38

$75.00 ANSI _I EC 60529-2004

38

$52.00 ANSI C37.58-2003

$46.00 ANSI /NEM A WC 54/I CEA T-26-465-2002

62

$114.00 ANSI C12.1-2001

38

$51.00 ANSI C37.85-2002

62

$111.00 ANSI C12.4-1984 (R2002)

60

$38.00 ANSI C62.61-1993

$32.00 WC 56-1986 (R2000, R2005)

62

$66.00 ANSI C12.5-1978 ( R2002)

51

$27.00 ANSI C78.5-2003

62

$121.00 ANSI C12.6-1987 (R2002)

51

$109.00 ANSI C78.20-2003

62

$61.00 ANSI C12.7-2005

51

$113.00 ANSI C78.21-2003

63

$34.00 ANSI C12.8-1981 ( R2002)

51

$50.00 ANSI C78.22-1995 (R2003)

71

72

$51.00 TP 1-2002

72

$69.00 TP 2-2005

72

$27.00 TP 3-2000

72

$42.00 TR 1-1993 (R2000)

73

$96.00 TS 1-1989 ( R1994, R2000, R2005)

74

$160.00 TS 2-2003

74

$111.00 TS 4-2005

77

$50.00 UC 2-1993 (R2000, R2005)

66

$138.00 UD 2-2004

66

$78.00 UD 3-2004

30

$58.00 VE 1-2002

31

$54.00 VE 2-2001

75

$62.00 WC 26-2000/EEM AC 201

75

$89.00 WC 50-1976/I CEA P-53426 2nd Ed. (R1993, R1999)

75

$72.00 ANSI /NEMA WC 512003/ICEA P-54-440

75

$37.00 WC 52-2005

75

$94.00 ANSI /NEM A WC 53/I CEA T-27-581-2002

75 75

20

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

ANSI C18 Series

NEMA

GE Consumer & Industrial Electrical Distribution • GE electronic catalogs are a lighter, faster and easier path to product information • Keeps the entire GE BuyLog® and Control Catalog at your fingertips • Automatically updates whenever product information changes • Saves a lot of paper – 2,120 pages

On balance, GE electronic catalogs are the smart way to stay current on GE electrical distribution and control products.

You can see a Flash demo and download GE electronic catalogs today. Just visit www.geelectrical.com. ecomagination™

Lighten up!

ecomagination is a trademark and BuyLog is a registered trademark of the General Electric Company.

imagination at work

P U B L I CA T I ON S I N D E X

52

$50.00 ANSI C78.23-1995 (R2003)

56

$40.00 ANSI C78.1417-1997

59

$203.00 ANSI C82.6-2005

56

$67.00 ANSI C78.1420-2001

59

$32.00 ANSI C82.9-1996

52

$58.00 ANSI C78.24-2001

56

$46.00 ANSI C78.1421-2002

59

$25.00 ANSI C82.9b-1998

52

$40.00 ANSI C78.30-1997

56

$32.00 ANSI C78.1430-1997

59

52

$43.00 ANSI C78.40-1992 (R2003)

56

$40.00 ANSI C78.1431-1997

$128.00 ANSI C82.11 Consolidated2002

$32.00 ANSI C78.1432-1997

$32.00 ANSI C82.12-1999

$25.00 ANSI C78.40a-1998

56

59

52

$58.00 ANSI C78.1433-2001

$50.00 ANSI C82.13-2002

$63.00 ANSI C78.41-2001

56

60

52

$77.00 ANSI C78.1434-2001

$172.00 ANSI C82.77-2002

$227.00 ANSI C78.42-2004

56

60

52

$291.00 ANSI C78.43-2005

56

$37.00 ANSI C78.1435-2002

69

52 52

$520.00 ANSI_IEC C78.81-2005

56

$26.00 ANSI C78.1450-1983 (R2002)

$43.00 ANSI C84.1-1995 ( R2001, R2005)

63

$65.00 ANSI /NEM A C93.1-1999

52

$48.00 ANSI C78.180-2003

57

$6.00 ANSI C78.1451-2002

32

$61.00 ANSI C119.1-2006

52

$77.00 ANSI C78.260-2002

57

$108.00 ANSI C78.1452-2004

34

$58.00 ANSI C119.4-2004

52

$14.00 ANSI C78.261-1977

57

$54.00 ANSI C78.1460-2004

34

$59.00 ANSI C119.6-2006

52

$9.00 ANSI C78.370_390l cd2002

57

$54.00 ANSI C78.1500-2001

60

$28.00 ANSI C136.1-2004

$32.00 ANSI C78.1501-2001

$25.00 ANSI C136.2-2004

$38.00 ANSI C78.370-1997 (R2003)

57

60

52

57

$54.00 ANSI C78.1503-2001

60

$27.00 ANSI C136.3-2005

52

$40.00 ANSI C78.375-1997

57

$32.00 ANSI C78.1504-2001

60

$38.00 ANSI C136.4-2003

53

$42.00 ANSI C78.376-2001

57

$54.00 ANSI C78.1505-2001

60

$28.00 ANSI C136.5-2003

53

$40.00 ANSI C78.379-2006

58

60

$28.00 ANSI C136.6-2004

53

$25.00 ANSI C78.379a-1997

$114.00 ANSI_IEC C78.603602002

60

$28.00 ANSI C136.9-2003

53

$52.00 ANSI C78.380-2005

58

$26.00 ANSI _I EC C78.60432: 12003

60

$44.00 ANSI C136.10-2006

53

$18.00 ANSI C78.381-1961

60

$27.00 ANSI C136.11-2006

58

53

$18.00 ANSI C78.385-1961

$23.00 ANSI _I EC C78.60432: 22004

60

$28.00 ANSI C136.12-2004

53

$26.00 ANSI C78.386-1989

58

61

$38.00 ANSI C136.13-2004

54

$238.00 ANSI C78.389-2004

$23.00 ANSI _I EC C78.60432: 32004

61

$28.00 ANSI C136.14-2004

54

$50.00 ANSI C78.390-1998 (R2002)

58

$26.00 ANSI _I EC C78.620352004

61

$28.00 ANSI C136.15-2004

61

$27.00 ANSI C136.16-2004

54

$65.00 ANSI C78.391-2004

58

$23.00 ANSI /NEMA C78.LL 32003

61

$37.00 ANSI C136.17-2005

61

$26.00 ANSI C136.18-2006

58

$23.00 ANSI /NEMA C78.LL 42003

61

$28.00 ANSI C136.19-2004

61

$28.00 ANSI C136.21-2004

58

$54.00 ANSI /NEMA C78.LL 1256-2003

61

$28.00 ANSI C136.22-2004

58

$32.00 ANSI _I EC C78.M R11-21997

61

$36.00 ANSI C136.23-2006

61

$38.00 ANSI C136.24-2004

54

$34.00 ANSI _I EC C78.682-1997

54

$416.00 ANSI_IEC C78.901-2005

54

$74.00 ANSI _I EC C78.1195-2001

54

$74.00 ANSI _I EC C78.1199-2002

54

ANSI C78.1340-1990

54

ANSI C78.1341-1990 (R1995)

58

$67.00 ANSI C79.1-2002

62

$26.00 ANSI C136.26-2003

54

ANSI C78.1342-1990

31

$49.00 ANSI C80.1-2005

62

$37.00 ANSI C136.27-2005

54

ANSI C78.1380-1988

31

$44.00 ANSI C80.3-2005

62

$36.00 ANSI C136.32-2006

54

$34.00 ANSI C78.1381-1998

31

$44.00 ANSI C80.5-2005

62

$37.00 ANSI C136.33-2005

54

$34.00 ANSI C78.1385-1998

31

$49.00 ANSI C80.6-2005

62

$38.00 ANSI C136.34-2004

54

$34.00 ANSI C78.1386-1998

58

$338.00 ANSI_IEC C81.61-2005

70

$28.00 ANSI Z535 Col or Char t

54

$50.00 ANSI C78.1387-2001

59

$229.00 ANSI_IEC C81.62-2005

70

$367.00 ANSI Z535 Set

55

$32.00 ANSI C78.1401-2004

59

$416.00 ANSI_IEC C81.63-2005

70

$367.00 ANSI Z535 Set (CD)

55

$29.00 ANSI C78.1402-2004

59

$83.00 ANSI _I EC C81.64-2005

70

$59.00 ANSI Z535.1-2006

55

$46.00 ANSI C78.1403-1997

59

$65.00 ANSI C82.1-2004

70

$75.00 ANSI Z535.2-2006

55

$29.00 ANSI C78.1406-2004

59

$100.00 ANSI C82.2-2002

70

$82.00 ANSI Z535.3-2006

55

$32.00 ANSI C78.1407-2004

59

$48.00 ANSI C82.3-2002

71

$69.00 ANSI Z535.4-2006

$100.00 ANSI C82.4-2002

71

$61.00 ANSI Z535.5-2006

71

$69.00 ANSI Z535.6-2006

55

$32.00 ANSI C78.1408-2004

59

55

$60.00 ANSI C78.1413-2001

59

22

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

ANSI C82.5-1990 (R1995)

NEMA

w w w . u l . c o m

 I VE R E  G    S   N U       E L       H  A         E T          R O     

     P

    M

R     

Y       

       O

 E   

        C

 X    P     E 

D     

O     

Y      O    

U   

H    A V  E  I T ?

   R   T    I      E  S

    .

E VE RY TH IN G E LS E FA LL S S HO RT O F T HE M A RK   If UL engineers seem exceptionally familiar with compliance standards, it’s because we write them. Our 979 Standards of Safety serve as the bedrock of compliance for nearly 200 industries and ANSI designates many as American National Standards. Every day, you’ll find UL engineers working hands-on with thousands of manufacturers— providing personal guidance during product certification and teaching the latest standards through the many workshops of UL University. If you’re looking to proficiently navigate the compliance process, choose the unequaled guidance of UL. Let UL’s experts personally guide you through your critical global market requirements. Browse the comprehensive workshops of UL University at www.uluniversity.com .

Copyright © 2006 Underwriters Laboratories Inc.® ULAB-479 3/06

S EA ST CT ND I ON ARD HSE A&DOT H E R P U B L I CA T I ON S The following pages contain the titles and ordering information for standards and other publications developed by NEMA and ANSI (the American National Standards Institute) for electrical products and components. Publications are organized by product categories and are available for purchase through Global Engineering Documents at (800) 854-7179 (outside the U.S. at (303) 397-7956; or via fax at (303) 397-2740). The information is also available on their website, www.global.ihs.com. Be sure to note that, in some cases, a publication must be obtained directly from NEMA. “Companion Standards” are other NEMA, ANSI, or IEC standards that might be of interest to the user. Standards approved by ANSI or adopted by the U.S. Department of Defense are so indicated. Contact information for sources for publications from other organizations are provided on page 131. Manufacturers of products related to the standard are listed under the same product category in the product and manufacturer listing, beginning on page 80. In addition to the association’s industry standards, users may also be interested in NEMA's other publications (guides, handbooks, reports, newsletters, and brochures) covering items of interest to electrical manufacturers, which can be found within their subject categories. Member and quantity discounts do not apply to these publications except as noted.

ARC WELDI NG EW 1-1988 (R1994, R1999, R2004) Electric Arc Welding Power Sources Defines performance characteristics, ratings, and test procedures for ac and dc arc welding apparatus and associated equipment as well as recommended installation and test procedures for high-frequency stabilized arc welding machines. Adopted by the U.S. Department of Defense. Companion Standards: EW 3, WD 1 Price: $43.00 EW 3-1983 (R1995, R1999, R2002) Semiautomatic Wire Feed Systems for Arc Welding Defines constr uction standards, performance characteri stics, and test procedures for wire feed systems used in most types of arc welding processes. Approved as an American National Standard. Companion Standard: EW 1 Price: $32.00 EW 3, Revision 1 Revises and updates EW 3. Price: $29.00

24

EW 4-1993 (R1999) Graphic Symbols for Arc Welding and Cutting Apparatus Establishes graphic symbols for arc welding and cutt ing apparatus. The symbols provided identi fy controls, indicators, connection points, junctions, and processes. Examples of their use are also provided. Price: $94.00 EW 6-1998 Guidelines for Precautionary Labeling for Arc Welding and Cutting Products Provides guidelines for the precautionary labeling of arc welding and arc cutting products, including the use of wordless (symbol only) labels. Price: $50.00

BATTERIES, DRY ANSI C18 Series Represents the most up-to-date requirements for battery performance and dimensions. Each standard has been divided into two part s. The first part covers general items and battery specifications. All matters related to safety are now consolidated in Part 2. This complete set of ANSI C18 standards now stands as the unrivaled model for the global battery standards community.

2005 EL ECTRICAL STANDARDS & PRODUCT GUI DE

ANSI C18.1M, Part 1-2005 For Portable Primary Cells and Batteries with Aqueous Electrolyte—General and Specifications Applies to portable primary cells and batteri es with aqueous electrolyte and a zinc anode (non-lithium). This edition includes four electrochemical systems: carbon zinc (LeClanche and zinc chloride types), alkaline manganese dioxide; silver oxide; and zinc air. Approved as an American National Standard. Price: $82.00 ANSI C18.1M, Part 2-2003 For Portable Primary Cells and Batteries with Aqueous Electrolyte—Safety Standard Specifies performance requirements for portable primary batteries with aqueous electrolyte and zinc anode (non-lithium) to ensure their safe operation under normal use and reasonably foreseeable misuse. Approved as an American National Standard. Price: $65.00

NEMA

IHS is a leading provider of critical information, standards, subscriptions, products, solutions and services to governments and corporations in six core industries in over 100 countries. Our objective

is to provide complete information solutions that improve customers’ efficiency, competitive positions and offers decision support at every level of the product development life cycle. Our information tools offer users quick access to a vast amount of timely and relevant information and knowledgebased application tools. IHS is proud to align with NEMA to provide mission critical information. 800 716 3447 (USA/Canada) 303 397 2896 (International) global.ihs.com

B A T T E RI E S , D RY T H R OU GH B U SW AY S, CON D U I T, R A CE W AY S

ANSI C18.2M, Part 1-2003 American National Standard for Portable Rechargeable Cells and Batteries— General and Specifications Applies to portable rechargeable or secondary cells and batteries based on the foll owing electrotechnical systems: nickel-cadmium, nickel-metal hydride, sealed lead-acid, and li thium-ion. Price: $72.00 ANSI C18.2M, Part 2-1999 For Portable Rechargeable Cells and Batteries—Safety Standard Defines performance requirements for portable rechargeable cells and batteries to ensure their safe operation under normal use and reasonably foreseeable misuse. Approved as an American National Standard. Price: $36.00 ANSI C18.3M, Part 1-2005 American National Standard for Portable Lithium Primary Cells and Batteries— General and Specifications Applies to portable lithium primary cells and batteri es, including the following electrochemical systems: li thium/carbon monofluoride, li thium/manganese dioxide, and li thium/iron disulfide. Price: $69.00 ANSI C18.3M, Part 2-2003 For Portable Lithium Primary Cells and Batteries—Safety Standard Specifies tests and requirements for primary lithium cells and batteries, both the chemical systems and the types covered in ANSI C18.3M , Part 1, to ensure their safe operation under normal use and reasonably foreseeable misuse. Approved as an American National Standard. Price: $65.00

26

BUSWAY, CONDUI T, RACEWAYS Conduit-I n-Casing Construction Power and communication industries are on a never-ending quest to "get the cord long enough." Conduit-incasing construction is one method that helps make the cord long enough to get from the communication or power source to the consumer. Downloadable from www.nema.org. Expansion Joints for PVC Rigid Nonmetallic Conduit Polymer Raceway Products (PVC) Technical Committee publi cation notes that fluctuations in temperature have a greater effect upon polyvinyl chlori de (PVC) than more traditional materials such as aluminum and steel. Thermal expansion and contraction have significant effects on long straight runs of conduit; therefore, expansion joints are used to accommodate changes in length.This prevents potentially harmful thermal stresses in the conduit itself or in any supporting structures. Downloadable from www.nema.org. Solvent-Cementing Joints for PVC Rigid Nonmetallic Conduit, Duct, and Fitt ings Four-page application guide prepared by the Polymer Raceway Products Technical Committee discusses aspects of solvent-cementing of joints for PVC rigid nonmetalli c conduit, duct, and fi ttings. Topics include: to prime or not t o prime; solvent cement selection cri teria, storage requirements; recommended cutt ing procedures for conduit or duct; cleaning procedure; appli cation procedure; assembly precautions; and atmospheric considerations. Downloadable from www.nema.org.

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

BU 1-2002 Busways Applies to service-entrance, feeder, and branch-circuit busways and associated fittings rated at 600 V or less, 6 000 A or l ess, and intended for use in accordance with the Canadian Electrical Code, Part 1 (CE Code, Part 1), the National El ectri cal Code (NEC), ANSI/NFPA 70, and the Mexican Standard for Electrical Installations (Utility), NOM-001-SEDE (See Annex B, Reference Item No. 1). Adopted UL 857 standard. Companion Standards: AB 1, ANSI C37.16, BU 1.1, I CS 1, KS 1, PB 1 Price: $885.00; electronic price: $431.00 BU 1.1-2005 General I nstructions for Proper Handling, Installation, Operation, and Maintenance of Busway Rated 600 Volts or Less Covers products for distribution of electric power at 600 volts or less, consisting of enclosed sectionalized prefabricated busbars rated at 100 amperes or more, and associated str uctures and fitt ings, classified as follows: feeder busways (indoor or outdoor), plug-in busways (indoor only), and accessories requir ed to complete the busway system. Note: Discounts available for bulk orders.) Also available in 5 x 7 format. Price: $49.00 BU 1.1-2005 (Spanish edition) I nstrucciones Generales Para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600 Volts Nominales o Menos Esta norma se aplica a productos para la distribución de energía eléctrica hasta 600 volts o menores, compuestos de electroductos cerrados en secciones prefabricadas, con una capacidad nominal de 100 amperes o más, y estructuras y accesorios asociados, clasificados en la forma siguiente: a. Electroducto alimentador (i nterior o exterior) b. Electroducto NEMA

More and more, the brands of choice come from Thomas & Betts. Red •  •Dot  D   ot ®  Weatherproof 

Kindorf ® 

Steel City ® 

Angler Clamps and Strut 

Fittings and Boxes  ® 

E-Z Code  Marking Systems 

Ty-Duct ®  Wiring Duct 

® 

Color-Keyed  Connectors 

Whether the job is residential, commercial, or industrial construction — or in-plant MRO — contractors and electricians put their trust in Thomas & Betts products and brands. And distributors appreciate the “easy-to-do-business-with” support that comes with T&B products. At Thomas & Betts, we're committed to keeping things that way. way. For more information on the full line of T&B products, contact your Thomas & Betts distributor, or to locate one, call 1-800-816-7809 or

Fastening

Terminals

Industrial Fittings

Power and Grounding

Tools and Accessories

Boxes and Covers

Weatherproof Boxes

Commercial Fittings

Metal Framing

Marking Systems

visit www.tnb.com .

© 2006 Thomas & Betts Corporation.

B U SW S W AY A Y S, S , C ON D U I T , R A CE CE W AY AY S

conectador (solamente interior) c. Accesorios necesarios para completar el si ste stema ma de el ectr ctrodu oducto. cto. Esta norma no aplica a los electroductos metálicos cerrados como se describe en la Norma C37.23 de la ANSI/IEEE. Downloadable from www.nema.org. Price:: $49.0 Price $49.00 0 BU 1.2-2002 Applicati App lication on I nformation for Busway Rated 600 Volts or Less Covers products for distribution of electric power at 600 volts or less, consisting of enclosed sectionalized prefabricated busbars rated at 100 amperes or more. Price:: $51.0 Price $51.00 0 Bulletin 5RN 2189 Bulletin 21 89 User Guide to Product Specifications for Metal Electrical Conduit and Tubing Published by the Steel Rigid Conduit and Electrical Metallic Tubing Section in the interest of more widely disseminating information on the proper identi fifica catition on of of U.S. stand tandards ards ap applicab plicable le to metal electrical conduit and tubing. Downloadable at www.nema.org. Price:: $0.00 Price ANSI/NEMA FB 1-2003 Fittt ings Fit ings,, Cas Castt Metal M etal Boxes Boxes,, and Conduit Bodies for Cond Co nduit, uit, Elec Electr trica icall Metallic Tubing and Cable Covers fittings that are a part of el ectr ectrii cal raceway sys systt em ems s designe designed d for use as intended by the requirements me nts of NFPA N FPA 70. Sp Spe ecifi cifica callll y covcovers fittings for use with non-flexible tubular raceways-rigid and intermediate me metal tal condu conduitit , el ectr ctrii ca call metal metallili c tubing, as we wellll as fifitt tt ings for us use e wit wit h flexible conduit and cable systems. Approved as an American National Standard and adopted by the U.S. Depar De partt me ment nt of De Deff en ense se.. Comp ompan anion ion Standards: Standards: WD 6, OS 1, OS 2, 2, NEMA 250, 250, VE 1, 1, AN ANS SI C80.1, ANSI C80.6 C80.6 Price:: $72.0 Price $72.00 0 28

FB 2.10-2003 Selectt ion and Selec and Ins I nstt allati allation on Guidelines for Fittings for Use with Non-flexible Electrical Metal Conduit or Tubing (Rigid Metal Met al Co Cond nduit, uit, I nterme ntermedia diate te Metal Met al Con Condu duit, it, an and d Electrical Metallic Tubing) Designed to provide guidance to installers on critical selection and instal ins tallati lation on cri criteria. teria.Th The e FB 2 Seri Serie es of publications represents a commitment by NEMA's conduit and cable fittings manufacturers to quality raceway installations made in accordance with the National Electrical Code. Downloadable from www.nema.org. Price:: $52.0 Price $52.00 0 FB 2.20-2003 Selectt ion and Selec and Ins I nstt allati allation on Guidelines for Fit Fittt ings for Use with Flexible Electrical Conduit and Cable The se sel ecti ction on and install instal l ati ation on guideguidelines offer practical information on correct product selection and industry recommended practices for the installation of fittings for flexible conduit or cable in accordance with the Nation Nati onal al El Ele ectr ctrical ical Cod ode e. Downloadable from www.nema.org. Price:: $78.0 Price $78.00 0 FG 1-1993 Fiberglass Cable Tray Systems Covers construction and test requirements me nts for con contt inuous inuous,, com complete plete nonmett all me allii c sys systems tems of l add adde er, ve venti ntill ated, soli olid d bottom bott om cable cable trays tr ays,, or channe channel t ype t rays rays,, int inte ende nded d for the supp suppor ortt of powe pow er or con contt rol cab cabll es, or both. Price:: $50.0 Price $50.00 0 RN 1-2005 Polyvinyl Polyv inyl Chloride (PVC) ( PVC) Externally Coated Galvanized Rigid Steel Conduit and I ntermediate Metal Conduit Conduit Covers continuous polyvinyl chloride ext xte eri rior or coatings, coatings, corrosion r esi stant inte int eri rior or coatings coati ngs,, and the galvan galvanii ze zed d steel con conduit duit,, ga gall va vanize nized d st st eel int inte er mediat me diate e me metal con conduit duit,, thr thre eade aded d coucou-

2006 200 6 EL ECTRICAL STANDARDS & PRODUCT GUI GUI DE

pli ngs,, and el bows t o whi plings whi ch they may be applied. Adopted by the U.S. De Depart partme ment nt of Defense Def ense.. Price:: $37.0 Price $37.00 0 RN 2-1987 (R1992, R2001) Packaging of Master Bundles for Steel Rigid Rigid Condu Conduit, it, I nterme ntermedia diate te Metal Con Condu duit it (I ( I MC), an and d Electrical Metallic Tubing Covers recommendations for the size and banding of master bundles of galvanize galva nized d stee steell rigid r igid condu conduii t , int inte er mediate me diate me metal co cond nduit uit (I M C), an and d elec lectr trical ical metall metallic ic tubing tubing (EM T), in 10 foot lengths only. Downloadable from www.nema.org. Price:: $38.0 Price $38.00 0 RN 3-1991 (R2002) Product Produ ct I de dentification ntification Numbers Numbe rs for Met Metallic allic Tubular Tubular Conduit Products for Use with Bar Coding and Electronic Data I nterchan nterchange ge Applications Applications Sets forth identification numbers for metal me tallili c tubular conduit conduit prod products ucts (galvanize (galva nized d rigid r igid co cond nduit uit,, el ectr ctrii ca call metal me tallili c tub t ubing, ing, interme intermediate diate metal metal conduit con duit,, and ga gall va vanize nized d rig ri gid alual uminum conduit) for use in bar coding, EDI , and other busi busi ne ness ss commun communii cations. Downloadable from www.nema.org. Price:: $43.0 Price $43.00 0 TC 2-2003 Electrical Electr ical Polyvinyl Polyvinyl Chloride (PVC) Tubing and Conduit Covers electrical polyvinyl chloride (PVC) conduit of types EPC-40— designed for normal-duty applications above ground and concrete encased appli ap plica catition ons s or or dir dire ect bu buri ri al—and EPC-80—designed for heavy-duty (areas of physical damage) applications above ground and concrete encased applications or direct burial. Comp ompan anion ion Stand St andard: ard: TC 3 Price:: $58.0 Price $58.00 0

NEMA

You’ll know us by our brands.

 Acuity Brands Lighting. Conyers, GA 30012 www.acuitybrandslighting.com

B U SW AY S, CON D U I T, R A CE W AY S

TC 3-2004 Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing Covers PVC fittings intended to be  joined in the field by means of a solvent cement system to PVC rigid conduit, tubing, and other fi tt ings, based on the outside diameters given in NEMA Standards Publi cati on TC 2-2003. Adopted by the U.S. Department of Defense. Companion Standard: TC 2 Price: $58.00 TC 6&8-2003 Polyvinyl Chloride (PVC) Plastic Utilities for Underground I nstallations Defi nes general requirements, performance requirements, test methods, and marking for the following types of PVC plasti c utili ti es duct, intended for installation underground for communications and electrical wire and cable: Type EB-20, designed for burial encased in concrete; Type EB-35, designed for burial encased in concrete; Type DB-60, designed for direct burial without encasement in concrete; Type DB-100, designed for direct burial without encasement in concrete; and Type DB-120, designed for direct burial without encasement in concrete. Adopted by the U.S. Department of Defense. Companion Standards: TC 9 Price: $58.00 TC 7-2005 Smooth-Wall Coilable Electrical Polyethylene Conduit Covers the following types of electrical high-density polyethylene (HDPE) conduit: EPEC-A—HDPE; EPECB—HDPE; EPEC-40—HDPE; and EPEC-80—HDPE conduit. Price: $49.00

30

TC 9-2004 Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installation Defines general requirements including material s, trade sizes, dimensions, and workmanship for the following types of fittings for PVC plastic utilities duct used for the underground installation of communication and electrical wire and cable: Type EB, designed for encased burial in concrete when installed in trenches underground; and Type DB, designed for direct burial in trenched underground without a requirement for encasement in concrete. Adopted by the U.S. Department of Defense. Companion Standard: TC 6&8 Price: $51.00 TC 13-2005 Electrical Nonmetallic Tubing (ENT) Covers electric nonmetallic tubing (ENT) materials, dimensions, and physical properties. Adopted by the U.S. Department of Defense. Price: $49.00 TC 14-2002 Reinforced Thermosetting Resin Conduit (RTRC) and Fittings Specifies the requirements for halogen-free reinforced thermosett ing r esin conduit (RTRC), and associated fittings for installation and use in accordance with the Rules of the Canadian Electrical Code, (CEC) Part I, and the National Electrical Code (NEC) for nonhazardous locations. Adopted UL 1684 standard. Price: $699; electronic price: $265.

TC 19-2001 Nonmetallic Riser U-Type Guards Lists dimensions, sets forth properties, and assists in selecti ng and obtaining the proper PVC and PE nonmetallic riser U-type guards intended to protect riser cables on utility poles. Price: $62.00 TCB 2-2000 Guidelines for the Selection and I nstallation of Underground Nonmetallic Duct Covers recommendations for shipping, handling, storage, install ation, and joining of underground single bore nonmetallic duct for power, lighting, signaling, and communications applications. Downloadable from www.nema.org. Price: $38.00 TCB 3-2001 User's Manual for t he Installation of Underground Corrugated Coilable Plastic Utility Duct (CCD) Covers recommendations for shipping, handling, storage, install ation, and joining of underground CCD for power, lighti ng, signaling, and communications appli cations. Price: $54.00 VE 1-2002 Metal Cable Tray Systems Specifies the requirements for metal cable trays and associated fittings designed for use in accordance with the rules of the Canadian Electrical Code, Part I , and the National Electrical Code. Joint Standard with CSA I nternational; approved as an American National Standard. Price: $58.00

TC 18-2004 Packaging of Master Bundles for EPC-40 Polyvinyl Chloride (PVC) Conduit Covers recommendations for the size and banding of master bundles for electrical EPC-40 PVC conduit. Price: $38.00

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

NEMA

B U S WA Y S, CON D U I T S , R A CE W AY S T H R OU GH CA P A CI T OR S

VE 2-2001 Cable Tray Installation Guidelines Addresses shipping, handling, storing, and installation of metal cable tray systems. I nformation on maintenance and system modification is also provided. Approved as an American National Standard. Price: $54.00 ANSI C80.1-2005 American National Standard for Electric Rigid Steel Conduit (ERSC) Covers the requirements for electrical rigid steel conduit for use as a raceway for wires or cables of an electrical system. Approved as an American National Standard. Price: $49.00

ANSI C80.3-2005 American National Standard for Steel Electrical Metallic Tubing (EMT) Covers the requirements for steel electrical metalli c tubing, for use as a raceway for wires or cables of an electrical system. Approved as an American National Standard. Price: $44.00 ANSI C80.5-2005 American National Standard for Electrical Rigid Aluminum Conduit (ERAC) Covers the requirements for portholeextruded aluminum-alloy conduit for use as a raceway for the wires or cables of an electrical system. Approved as an American National Standard. Price: $44.00

ANSI C80.6-2005 American National Standard for I ntermediate Metal Conduit (EIMC) Covers the requirements for steel electric intermediate metal conduit for use as a raceway for wires or cables of an electrical system. Approved as an American National Standard. Price: $49.00

CAPACI TORS CP 1-2000 Shunt Capacitors Applies to capacitors rated 216 V or higher, 2.5 kVAR or more, and designed for shunt connection to ac transmission and distri bution systems operating at a nominal frequency of 50 or 60 Hz. Companion Standards: 107, ICS 2 Price: $70.00

FREE. The New Wiremold Buyer’s Guide.

®

Meet Wiremold/Legrand, your single source for wire and cable management solutions. The new Buyer’s Guide includes many new, innovative products and encompasses everything from perimeter and open-space designs, to overhead and Walker® infloor systems. It also includes our wide selection of power and data quality systems designed to protect critical equipment from surges, spikes, and noise. To order your free Buyer’s Guide, visit www.wiremold.com or call 1-800-621-0049.

NEMA

2006 ELECTRICAL STANDARDS & PRODUCT GUI DE

31

CA R B ON / M A N U F A C T U R E D G RA P H I T E P R OD U T C S T H R OU G H C ON N E C T OR S

CARBON/ MANUFACTURED GRAPHI TE PRODUCTS CB 1-2000 Brushes for Electrical Machines Records definitions, dimensions and tolerances, test procedures for physical properties, and test procedures for shunt connections for brushes used in the electrical manufacturing industry. I ncluded are carbon, carbon-graphite, graphite, electrographit e, metalgraphite, metal-impregnated, and resin-bonded brushes. Price: $139.00 CG 1-2001 Manufactured Graphite/Carbon Electrodes Defines dimensions and configurations of cylindri cal manufactured graphite and carbon electrodes for use in electri c arc furnaces, as well as design and physical properties of joining systems. Price: $51.00 CG 2-2004 Powdered Graphite Covers terminology and test methods for those physical and chemical properties relevant to the material characterization of powdered graphite used in the electrical industry. Price: $55.00

COM MU NI CATI ONS & SIGNALING EQUIPMENT NEMA Installation Guide for Nurse Call Systems Contains guidelines which cover the proper physical installation of nurse call systems. It describes system types, basic theory of operation, use of ancil lary devices, install ation requirements, isolation of circuits, system environmental considerations, inspection, testing, maintenance, and service. Price: $85.00

32

SB 10-1991 (R1998, R2005) Audio Standard for Nurse Call Systems Contains requirements and test procedures for evaluation of audio quality of installed nurse call systems. Price: $32.00 SB 28-1992 (R1997, R2003) Product Safety Guide for Developing Documentation for Fire Alarm Systems and Equipment Guidelines for developing product documentation, such as installation manuals, operation manuals, and product labels, for fire alarm systems. Price: $74.00 SB 30-2005 Fire Service Annunciator and I nterface Covers the design, operation, and arrangement of equipment intended to display data and status of building systems, and to provide certain control functions. Price: $56.00

Annular Space Protection of Openings Created by Penetrations of Tubular Steel Conduit, A Review of UL Special Service I nvestigation, File NC 546, Project 90NK11650 Summary of the results of a study of various annular space protection materials installed in a concrete block wall , concrete floor assemblies, gypsum wall board/wood joist/plywood deck floor-ceiling assembli es, and two varieties of gypsum wallboard/steel stud wall assemblies. The purpose of the investigation was to determine if commonly available construction materials could be used as annular space protection materials in con junction with tabular steel conduit products. Tests were conducted to verify that these combinations of products will meet certain requirements contained in the BOCA, I CBO, and SBCCI M odel Building Codes. To order, phone: (703) 841-3244.

CONNECTORS CONDUI T & DUCT, ELECTRICAL Tubular Steel Conduit Four-page color brochure presenting the advantages of steel conduit products. To order, phone: (703) 841-3244. The Grounding System that Works—Steel Conduit (EMT, I MC, and Galvanized Rigid) Six-page brochure that describes new steel conduit analysis software for designing and analyzing distribution feeder and branch circuits; determining ground fault design; calculating new runs and optimizing safe design; and analyzing existing circuits. To order, phone: (703) 841-3244. Report of Research on Electrical Metallic Tubing for Use Over 600 Volts To order, phone: (703) 841-3244.

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

ANSI/NEMA CC 1-2005 Electric Power Connection for Substations Covers uninsulated connectors and bus supports that are made of metal and intended for use with conductors or bus made of copper or aluminum alloy and found in substations. Price: $75.00 ANSI C119.1-2006 American National Standard for Electric Connectors—Sealed I nsulated Underground Connector Systems Rated 600 Volts Covers sealed, insulated underground connector systems rated at 600 volts for utility applications and establishes electri cal, mechanical, and sealing requirements for sealed underground connector systems. Approved as an American National Standard. Price: $61.00

NEMA

CON N E CT OR S T H R OU G H D I ST R I B U T I ON E QU I P M E N T

ANSI C119.4-2004 American National Standard for Electric Connectors— Connectors for Use Between Aluminum-to-Aluminum or Aluminum-to-Copper Conductors Covers connectors used for making electrical connections between aluminum-to-aluminum or aluminum-tocopper conductors used on distribution and transmission lines for electric utility.This standard establi shes the electrical and mechanical test requirements for electrical connectors. Price: $58.00 ANSI C119.6-2006 American National Standard for Electric Connectors—Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Conductors Covers non-sealed, multiport distri bution connectors rated 600 volts or less used for making electrical connections between aluminum-to-aluminum, aluminum-to-copper, or copper-to-copper conductors for above grade, electri c utility applications. Approved as an American National Standard. Price: $59.00

DISTRIBUTION EQUIPMENT AB 1-2002 Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures Covers molded-case circuit breakers, circuit breaker and ground-fault circuit interrupters, fused circuit breakers, and accessory high-fault protectors. Adopted UL 489 standard. Price: $1,062.00 Electronic price: $518.00 AB 3-2001 Molded Case Circuit Breakers and Their Application Covers molded case circuit breakers and molded case switches, assembled as integral units in supporting housings of i nsulating materi al, having voltage ratings up to and including 1000 volts AC and 1200 volts DC, and interrupt ratings of 5000 amperes or more. Downloadable from www.nema.org. Companion Standards: AB 1, AB 4, PB 2.2 Price: $76.00 AB 4-2003 Guidelines for I nspection and Preventive Maintenance of Molded Case Circuit Breakers Used in Commercial and I ndustrial Applications Sets forth, for use by quali fi ed personnel, a number of basic procedures that may be used for the inspection and preventive maintenance of molded case circuit breakers used in industrial and commercial applications rated up to and including 1000 V 50/60 Hz AC or AC/DC. Downloadable from www.nema.org. Companion Standard: AB 1 Price: $63.00

34

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

KS 1-2001 Enclosed and Miscellaneous Distribution Equipment Switches (600 Volts Maximum) Covers manually operated enclosed and miscellaneous distri bution equipment switches that are rated not more than 600 volts and 6000 amperes with or without a horsepower rating; with or without provision for fuses; and with current-carrying parts and mechanisms enclosed in metalli c or nonmetalli c cases, or that are enclosed when mounted in enclosed switchboard or panelboard. Adopted by the U.S. Department of Defense Companion Standards: AB 1, I CS 1, I CS 2, NEMA 250 Price: $92.00 PB 1-2006 Panelboards Covers single panelboards or groups of panel units suitable for assembly in the form of single panelboards, including buses, and with or wit hout switches or automatic overload protective devices (fuses or circuit breakers), or both.These unit s are used in the distribution of electricity for light, heat, and power at 600 volts and less with: a. 1600-ampere mains and less b. 1200-ampere branch circuits and less. Specifically excluded are live-front panelboards, panelboards employing cast enclosures for special service. Adopted by the U.S. Department of Defense. Companion Standards: FU 1, KS 1, PB 2.2, NEMA 250, AB 1, AB 3, PB 1.1 Price: $59.00

NEMA

Electrical Contractors SPECIFY Your Products! Failure to recognize this fact can cost your company money and share. Consider these facts:

Over 42% of all electrical contractor revenue comes from design/build projects. They are involved in design/specification from the get-go.

Over 80% of all specs are multi, or-equal, or performance. Final brand selection will be determined by the ec.

Electrical contractors are receiving specifications from designers LESS complete, leaving many final design and detailing decisions directly up to the electrical contractor on the site.

Electrical contractors are involved in virtually every phase of product specification and installation. ELECTRICAL CONTRACTOR Magazine reaches over 85,900 of them! Every month, ELECTRICAL CONTRACTOR talks to more of your key specifier customers in an atmosphere they find more useful and prefer by more than a 3:1 margin.

Talk with Publisher, JOHN MAISEL, at 301-215-4514 or [email protected], for specific details on recent independent market research that can help you better understand the changing role of today’s electrical contractor. It is important to you.

DISTRIBUTION EQUIPMENT

ANSI/NEMA PB 1.1-2002 General I nstructions for Proper I nstallation, Operation, and Maintenance of Panelboards Rated 600 Volts or Less Covers single panelboards or groups of panel units suitable for assembly in the form of single panelboards, including buses, and wit h or without switches or automatic overload protective devices (fuses or circuit breakers), or both. Approved as an American National Standard. Companion Standards: PB 1, PB 2.2, AB 4 Price: $31.00 PB 1.1-2002 (Spanish edition) I nstrucciones Generales para la I nstalacion, Operacion y el Mantenimiento Correcto de Tableros de Alumbrado y Control hasta 600 Volts Nominales o Menos A guide of practical information containing instructions for the proper installation, operation, and maintenance of panelboards rated 600 volts or less. ANSI approved. Companion Standards: PB 1, PB 2.2, AB 4 Downloadable from www.nema.org. Price: $28.00 PB 2-2006 Deadfront Distribution Switchboards Covers floor-mounted deadfront switchboards rated 6000 amperes or less, 600 volt s or less, which consist of an enclosure, molded case circuit breakers, low-volt age power circuit breakers, fusible or non-fusible swit ches, instruments, metering equipment, monitori ng or control equipment, wit h associated interconnections and supporting structures. These units are used in the distribution of electri city for l ight, heat, and power. Adopted by the U.S. Department of Defense. Companion Standards: AB 1, BU 1, I CS 1, KS 1, PB 1, PB 2.2, ANSI 36

C37.16, ANSI C37.17, ANSI C37.50 Price: $59.00 ANSI/NEMA PB 2.1-2002 General I nstructions for Proper Handling, Installation, Operation, and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less Covers floor-mounted deadfront switchboards which consist of an enclosure, molded-case and low-voltage power circuit breakers, fusible or non-fusible swit ches, instruments, and metering, monitori ng, or control equipment, wit h associated interconnections and supporting structures. Approved as an American National Standard. Adopted by the U.S. Department of Defense. Companion Standards: PB 2, PB 2.2 Price: $31.00 PB 2.1-1996 (Spanish edition) I nstrucciones Generales para el Manejo, I nstalacion, Operacion y Mantenimiento Correcto de Tableros de Distribucion de Frente Muerto hasta 600 Volts Nominales o Menos Proper handling, installation, operation and maintenance of deadfront distribution switchboards rated 600 volts or less. Downloadable from www.nema.org. Price: $32.00 PB 2.2-2004 Application Guide for Ground Fault Protective Devices for Equipment A guide of practical information containing instructions for the safe and proper application of ground fault protective devices. Downloadable from www.nema.org. Adopted by the U.S. Department of Defense. Companion Standards: ANSI C37.16, ANSI C37.17 Price: $72.00

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

SG 4-2000 (R2005) Alternating Current High Voltage Circuit Breaker Encompasses: a) All ratings for outdoor circuit breakers above 1000 volts for alternating current service. Circuit breakers for service in metal clad enclosures are included in NEMA Standard SG 5. b) Attachments for these circuit breakers, such as bushing current transformers, bushing potential devices, interl ocks, undervoltage trip devices, shunt trips, overcurrent trips, and auxiliaries sold with the circuit breakers such as closing relays and structural steel supports. c) Renewal, modernizing, and spare part s for these circuit breakers and attachments. d) Recommended installation, operation, and maintenance procedures. Price: $63.00 ANSI C37.50-1989 (R1995, R2000) Switchgear Low Voltage AC Power Circuit Breakers Used in Enclosures—Test Procedures Covers the test procedures for enclosed low-voltage ac power circuit breakers as follows: stationary or drawout circuit breakers of two- or three-pole construction; Unfused or fused circuit breakers; and manually operated or power-operated circuit breakers with or wihtout electromechanical or solid-state tri p devices. Price: $50.00 ANSI C37.51-2003 American National Standard for Switchgear—Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies— Conformance Test Procedures Optionally applicable to all metalenclosed low-voltage AC power circuit breaker switchgear assemblies designed, tested, and manufactured in accordance with ANSI/I EEE C37.20.1-2002. Price: $52.00

NEMA

The highest energy efficiency available. Introducing copper rotor technology from Siemens.

Introducing industry-leading efficiencies–that’s what Siemens’ new die-cast copper rotor technology delivers to the industrial motor marketplace. With their advanced design, these motors exceed NEMA Premium® requirements. A global technology and innovation leader, Siemens is committed to bringing the motors industry cutting-edge innovations and the finest products possible for decades to come. For more information or to contact a sales representative, call, e-mail or visit our web site. Siemens Energy & Automation, Inc. • 1-800-964-4114 ref. code 1-158425520 • [email protected] • www.sea.siemens.com

 .    c    n    I  ,    n    o    i    t    a    m    o    t    u    A    &    y    g    r    e    n    E    s    n    e    m    e    i    S    6    0    0    2    ©

D I ST R I B U T I ON E QU I P M E N T T H R OU GH GE N E R A L I N T E R E ST

ANSI C37.54-2002 For I ndoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear— Conformance Test Procedure Specifies tests to demonstrate that the circuit breaker being tested conforms with the ratings assigned to it in accordance with ANSI/I EEE C37.04. Approved as an American National Standard. Price: $72.00 ANSI C37.55-2002 American National Standard for Switchgear—Medium Voltage Metal-Clad Assemblies— Conformance Test Procedures Applicable to all medium voltage metal-clad switchgear assemblies designed, tested, and manufactured in accordance wit h ANSI/I EEE C37.20.2, Metal-Clad Switchgear. Covers selected tests to demonstrate conformance with Section 6 of ANSI/IEEE C37.20.02. Price: $65.00 ANSI C37.57-2003 American National Standard for Switchgear—Metal-Enclosed I nterrupter Switchgear Assemblies—Conformance Testing Applicable to all metal-enclosed interrupter switchgear assemblies designed, tested, and manufactured in accordance wit h ANSI/I EEE C37.20.3. Price: $67.00

ANSI C37.58-2003 American National Standard for Switchgear—Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear— Conformance Test Procedures Applies to the conformance test procedure for AC medium-voltage swit ches rated above 1000 volts as designed, manufactured, and tested in accordance with ANSI/I EEE C37.20.2. Price: $52.00 ANSI C37.85-2002 Alternating-Current High-Voltage Power Vacuum I nterrupters— Safety Requirements for X-Radiation Limits Specifies the maximum permissible X-radiation emission from alternating-current high-voltage power vacuum interrupters that are intended to be operated at voltages above 1000 volts and up to 38,000 volts when tested in accordance with procedures described in this standard. Approved as an American National Standard. Price: $51.00

ENCLOSURES A Brief Comparison of NEMA 250 and IEC 60529 Provides a brief comparison and explanation of some of the basic differences between NEMA 250, Enclosures for Electrical Equipment (1000 Volts Maximum) and IEC 60529, Degrees of Protection Provided by Enclosures (I P Code). Downloadable from www.nema.org. 250-2003 Enclosures for Electrical Equipment (1000 Volts Maximum) Consolidates the descriptions and appli cations, features and test cri teri a, and design tests of all NEMA type enclosures (except for rotary type apparatus) into a single document. Does not cover manufacturing standards for specific products; refer

38

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

to the following standards: BuswayBU 1; Pin and Sleeve-FB 11; Switchboards-PB 2; Swit ches-KS 1; Traffic Control Systems-TS 1; Transformers-DC 20, ST 20, TR 1; Welding-EW1, EW 3. Companion Standards: KS 1, FB 1, PB 2.1, AB 3, AB 4, ICS 6, OS 2, ANSI C57.12.29, ANSI C37.54, ANSI C57.12.28, ANSI C57.12.31, ANSI C37.22, ANSI C57.12.32, ANSI C37.50, ANSI C37.51, ANSI C37.52, ANSI C37.57, IEC 60529 Price: $63.00 ANSI_IEC 60529-2004 Degrees of Protection Provided by Enclosures (IP Code)( identical national adoption) Applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72.5 kV. Price: $75.00

FI RE PROTECTI ON Training Manual on Fire Alarm Systems 2003 Covers terminology, basic theory of operation, installation detail s, system startup t echniques, and general maintenance of fire alarms, and is intended to be used as source material for apprentices or journeymen in a classroom environment using a qualified instructor. I t emphasizes installation of basic fire alarm signaling systems instead of how to choose a system or equipment. Price: $57.00 Quality I nformational Guide for Automatic Fire Detection and Alarm Systems Provides guidance to the local authority having jurisdiction (AHJ) for establishing programs to ensure highly reliable fire detection and alarm systems in his or her community. Downloadable from www.nema.org.

NEMA

F I R E P R OT E CT I ON T H R OU G H I N D UST R I A L CON T ROL & A U T OM A T I ON S YST E M S

Guide for Proper Use of System Smoke Detectors 2001 edition. Provides information concerning the applications of smoke detectors used in conjunction with fire alarm systems. Basic principles to be considered are outlined as well as operating characteri stics of detectors and environmental factors that may either aid or prevent their operations. Price: $50.00 Guide for Proper Use of Smoke Detectors in Duct Applications 2001 edition. Provides much needed information concerning the proper use of smoke detectors in duct applications. Price: $37.00

GENERAL I NTEREST Maps and Directories I ndustri al Trading Area Maps. Wall and binder size maps of the NEMA trading areas and regions. Published by NEMA/BIS. 30"x40" Map-Price: $45.00; additional copies: $35.00. 8.5"x14" Map-Price: $10.00 single copy, $6.00 additional copy. Electrical Installation Requirements: A Global Perspective A study of NFPA 70, National Electrical Code, and IEC 60364, Electrical I nstallations for Buildings. Price: $205.00 NS 1-2005 Guide for Preparation of NEMA Standards Publications User guide for preparing documents in the NEMA approved format.

PDD 04.02.00 Product Descriptor Data Common Fields Requested,Version 4.02.00 Suggests the common fields and definitions that manufacturers need to share with distri butors and thirdparty catalog and information providers. Approved as an American National Standard. Price: $47.00

GOVERNMENT NEMA Analysis of the Energy Policy Act of 1992: The Scope of Electric Motors Subject to Efficiency Standards on October 24, 1997 The Energy Policy Act of 1992 (EPAct) covering the efficiency levels of general purpose industrial motors became eff ective October 24, 1997. This brochure presents information on the U.S. Department of Energy's interpretation of the 1992 Energy Policy Act and DOE's position on the scope of products covered and non-covered (exempt) by the legislation. Motor users and OEMs can refer to the information to determine whether the motors they purchase will be covered by EPAct and therefore must meet the standard energy-efficiency levels. Downloadable from www.nema.org. The Declining Presence of Mercury in Batteries and Municipal Solid Waste Describes the initiatives involving both new legislation and new battery technology, which have resulted in a dramatic reduction in the use of mercury in batteries. Downloadable from www.nema.org. Environmental I mpact Analysis: Spent Mercury-Containing Lamps Analyzes the environmental impact of various types of spent lamp management disposal options. To order, phone: (703) 841-3249.

40

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

I NDUSTRI AL CONTROL & AUTOMATI ON SYSTEMS Application Guide for AC Adjustable Speed Drive Systems Covers AC electrical drive systems, rated 600 volts or less, consisting of three-phase induction motors, voltage source pulse width modulated adjustable frequency contr ols, and associated components. I t addresses common issues that should be considered in the selection of drive system components and the installation and application of the drive system. Price: $97.00 Guide to Preparing a Design Proposal for Paralleling Customer Generation with an Electric Utility Takes the mystery out of interface design for parallel operation by providing sound engineering guidelines. Also assists the designer with the utility approval process. Careful planning, design, and proposal preparation are the keys to assuring successful coordination and approval by the electric utility company. It will help the designer obtain speedy approval and acceptance of the system. Downloadable from www.nema.org. Price: $50.00 IA 2.1-2005 Programmable Controllers— Part 1: General Information Applies to programmable controllers (PLC) and their associated peripherals such as programming and debugging tools, human-machine interfaces, etc., which have as their intended use the control and command of machines and industri al processes. Approved as an American National Standard. Price: $61.00

NEMA

I NDUSTRI AL CONTROL & AUTOM ATI ON SYSTEM S

IA 2.2-2005 Programmable Controllers— Part 2: Equipment Requirements and Test Specifies requirements and related tests for programmable controllers (PLC) and their associated peripherals (for example, programming and debugging tools (PADTs), human-machine interfaces (HMIs), etc.) which have as their intended use the control and command of machines and industrial processes. Approved as an American National Standard. Price: $128.00 IA 2.3-2005 Programmable Controllers— Part 3: Programming Languages Specifies syntax and semantics of programming languages for programmable controllers as defined in part 1 of IEC 61131. Price: $170.00

IA 2.8-2005 Programmable Controllers— Part 8: Guidelines for t he Application and I mplementation of Programming Languages This standards publication is a NEMA Authorized Engineering I nformation adopted from IEC TR 61131-8, Programmable Controllers—Part 8: Guidelines for the Application and I mplementation of Programming Languages. Applies to the programming of programmable controller systems using the programming languages defined in NEMA I A 2.3-2005. Price: $114.00 I CS 1-2000 (R2005) I ndustrial Control and Systems: General Requirements The purpose of this publication is to consolidate all standards of a general nature in order to obtain uniform

application of requirements throughout the range of industrial control and systems equipment. Downloadable from www.nema.org. Companion Standards: I CS 2 through 10, LI 1, ST 1, ANSI C84.1, IEC 947 1 Price: $104.00 I CS 1.1-1984 (R1988, R1993, R1998, R2003) I ndustrial Control and Systems: Safety Guidelines for the Application, Installation, and Maintenance of Solid State Control Provides general guidelines for the application, install ation, and maintenance of solid state control in the form of individual devices or packaged assemblies incorporating solid state components. The emphasis is personnel safety. Downloadable from www.nema.org.

IA 2.4-2005 Programmable Controllers— Part 4: User Guidelines Assists end-users in selection and specification of Programmable Controller equipment. Price: $133.00 IA 2.5-2005 Programmable Controllers— Part 5: Communications This standards publication is a NEMA Adoptive Standard based on Part 5 of I EC 61131, Programmable Controll ers. Specifies communication aspects of a programmable controller. Price: $114.00 IA 2.7-2005 Programmable Controllers—Part 7: Fuzzy Control Programming This standards publication is a NEMA Adoptive Standard based on Part 7 of IEC 61131, Programmable Controllers. Defines a language for the programming of fuzzy control applications used by programmable controllers. Price: $128.00 NEMA

2006 ELECTRICAL STANDARDS & PRODUCT GUI DE

41

I N D UST R I A L CON T ROL & A U T OM A T I ON S YST E M S

Companion Standards: I CS 2 thru 10, I EC 801 3 Price: $32.00 I CS 1.3-1986 (R2001) Preventive Maintenance of I ndustrial Control and Systems Equipment Covers fundamental principles, safety precautions, and common guidelines for preventive maintenance of most industrial control and systems equipment. Intended to supplement more specific maintenance instructions which may be provided for particular product lines and specific products and other NEMA standards and manufacturer publications. Downloadable from www.nema.org. Companion Standards: I CS 1 thru 10 Price: $31.00 I CS 2-2000 (R2005) I ndustrial Control and Systems: Controllers, Contactors, and Overload Relays Rated 600 Volts Provides general requirements for magnetic and non-magnetic motor controllers, overload relays, lighting contactors, and disconnect devices for industrial control applications. Provides information on ratings, classification, construction, marking, and performance and the tests intended to confirm that the device meets these conditions. Downloadable from www.nema.org. Companion Standards: ICS 1 thru 10, AB 1, MG 2, IEC 947 1, IEC 947 6 Price: $108.00 I CS 2, Part 9-2002 AC Vacuum-Break Magnetic Controllers Rated 1500 Volts AC Applies to magneti cally operated, full-voltage, vacuum-break, non-combination controllers rated 1500 volts for both motor and non-motor loads. Downloadable from www.nema.org. Companion Standard: I CS 2 Price: $63.00

42

I CS 2.3-1995 (R2002) I ndustrial Control and Systems: I nstructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers Contains instructions for the handling, installation, and maintenance of motor control centers rated 600 volts or less. Downloadable from www.nema.org. Price: $48.00 I CS 2.4-2003 I ndustrial Control and Systems: NEM A and IEC Devices for Motor Service—A Guide for Understanding the Differences The features, conventions, characteristi cs, and attributes identified in this guide are those of magnetic contactors and thermal overload relays. Control products compared or contrasted in this guide are those with equivalent electrical rati ngs; such ratings are expressed via nameplates, catalogues, or technical li terature. Downloadable from www.nema.org. Companion Standards: I CS 1, I CS 2, I EC 947 1 Part 1, I EC 947 4 Price: $58.00 I CS 3-2005 I ndustrial Control and Systems: Medium Voltage Controllers Rated 2001 to 7200 Volts AC Applies to AC general-purpose contactors and Class E magnetic controllers rated 2001 to 7200 volts, three phase, 50 and 60 hertz. Downloadable from www.nema.org. Companion Standards: I CS 1 thu 10, NEMA 250, ANSI C37.50, I EC 470 Price: $61.00

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

I CS 3.1-1997 (R2003) I ndustrial Control and Systems: Handling, Storage, and I nstallation Guide for AC General-Purpose Medium Voltage Contactors and Class E Controllers, 50 and 60 Hertz Contains practical information for architects, electrical engineers, contract ors, and maintenance personnel on the handling, storage, and installation of AC general-purpose medium voltage contractors and class E controllers. Downloadable from www.nema.org. Price: $38.00 I CS 4-2005 I ndustrial Control and Systems: Terminal Blocks Applies to one piece, or modular, or two piece terminal blocks with screwtype or screw-less-type clamping units intended for industrial use, and fixed to a support or to a printed circuit board to provide electrical and mechanical connection for round, solid, or stranded conductors (see standard scope for detailed specifications).The terminal blocks are intended for use in circuits of rated insulation voltage not exceeding 1000 V AC at a frequency not greater than 60 hertz, or not exceeding 1500 V DC. Downloadable from www.nema.org. Companion Standards: I CS 1 through 10, I EC 947 7 1 Price: $63.00 I CS 5-2005 I ndustrial Control and Systems: Control Circuit and Pilot Devices Provides general requirements, classifications, installation, maintenance, testing, and application information for control circuit and pilot devices and covers the requirements for control relays, limit switches, proximity swit ches, pushbuttons, selector switches, indicating and pushbutton stations. Downloadable from www.nema.org. Companion Standards: I CS 1 through 10, DC 2, I EC 947 5 1, IEC 947 5 2 Price: $146.00 NEMA

stay alert, S T AY

AL IVE

At home and in the workplace, many of the deaths, injuries and property damage caused by electrical hazards can be prevented. While improved product safety engineering, standards and electrical codes have reduced electrical hazards, nothing is more important than electrical safety awareness. Visit the Electrical Safety Foundation International at www.electrical-safety.org for free safety material and information on how you can reduce electrical hazards at home and in the workplace.

May is National Electrical Safety Month! Be part of it!

I N D UST R I A L CON T ROL & A U T OM A T I ON S YST E M S

I CS 5, Annex B-2002 I ndustrial Control and Systems: Typical Proximity Switch Specifications Contains specifications that represent common dimensions and operating characteristics of proximity switches. Downloadable from www.nema.org. Companion Standards: I CS 1, I CS 5 Price: $46.00 I CS 5, Annex E-2002 I ndustrial Control and Systems: Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic Fields States the performance and test conditions for proximity switches that operate in strong magnetic fields such as electric weld fields or electrolytic fields. Downloadable from www.nema.org. Companion Standards: I CS 1, I CS 5 Price: $46.00 I CS 5, Annex F-2002 I ndustrial Control and Systems: High Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices High-pressure power wash procedure requirements for proximity switches, limit swit ches, and panel mounted control devices that include pushbuttons, pilot lights, and selector switches. Downloadable from www.nema.org. Companion Standards: I CS 1, I CS 5 Price: $46.00 I CS 6-1993 (R2001) I ndustrial Control and Systems: Enclosures Covers the enclosure requirements of all industrial control devices functioning on commercial voltages of up to 750 volts DC, or up to 7200 volts AC. Includes information concerning ratings, construction, testing, performance, and manufacture. Downloadable from www.nema.org. Companion Standards: I CS 1 through 10, NEMA 250, ANSI C80.5, I EC 947 7 1 Price: $42.00 44

I CS 7-2006 I ndustrial Control and Systems: Adjustable-Speed Drives Provides practical information concerning ratings, construction, test, performance, and manufacture of industri al control equipment.These standards are used by the electrical industry to provide guidelines for the manufacture and proper application of reli able products and equipment and to promote the benefits of repetitive manufacturing and widespread product availabilit y. In the interest of harmonization, Parts 4 and 6 of I CS 72000 have been replaced by NEMA ICS 61800-2-2005. Part 5 has been replaced by NEMA I CS 61800-12002. Part 7 of ICS 7-2000 has been replaced by NEMA I CS 61800-4. Parts 4, 5, 6, and 7 are vacant. Downloadable from www.nema.org. Price: $61.00 I CS 7.1-2006 I ndustrial Control and Systems: Safety Standards for Construction and Guide for Selection, I nstallation, and Operation of Adjustable-Speed Drive Systems Applies to all industrial equipment electrical components and wiring which are part of the electrical drive system, commencing at the point of connection of input power to these components. Applies to open or enclosed electrical equipment for use on circuits which operate from an alternating-current supply voltage of 600 volts or less. Downloadable from www.nema.org. Price: $61.00 ANSI/NEMA I CS 8-2000 ( R2005) I ndustrial Control and Systems: Crane and Hoist Controllers Covers the requirements for crane and hoist controllers rated 600 volts or l ess, AC and DC. Approved as an American National Standard. Companion Standards: I CS 1 thru 10 Downloadable from www.nema.org. Price: $126.00

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

I CS 10-2005, Part 1 I ndustrial Control and Systems Part 1: Electromechanical AC Transfer Switch Equipment Applies to electromechanical automatic and nonautomatic transfer switches and bypass isolation switches rated 600 volt s AC or less, 60 Hertz, for use on single-phase and polyphase AC circuits. Companion Standards: I CS 1 through 10, MG 1, I EC 947 6 1 Downloadable from www.nema.org. Price: $56.00 I CS 10-2005, Part 2 I ndustrial Control and Systems Part 2: Static AC Transfer Equipment Applies to stati c automatic and static non-automati c t ransfer equipment without cross-connection of sources during transfer or retransfer, with or without bypass isolation switches rated 600 volts AC or l ess, not exceeding 6000 amps, for use on single-phase and polyphase AC circuits. Downloadable from www.nema.org. Price: $56.00 I CS 12.1-1997 I ndustrial Control and Systems: Profiles of Networked Industrial Devices—Part 1: General Rules Provides general rules and definitions for the development of profiles for networked industri al devices. The profil e terms, structure, format, and data interchange standardized in this publication serve to aid in the common description and understanding of these devices. Downloadable from www.nema.org. Price: $77.00

NEMA

 Today’s innovations will be tomorrow’s standards.

RadioTouch® wireless controls

Faedra™

RadioRA® Tabletop 5 Button Master Control Maestro® HomeWorks® seeTouch™

Softswitch48™ XPS panel

Grafik 7000™ e-lumen™ software with custom GUI

Lutron has built the lighting control category. We have created new opportunities for our customers with innovations in residential and commercial lighting control products that deliver legendary reliability along with unparalleled service and support. For the last 45 years, it has been an honor to provide the world’s most extensive line of lighting control © 2006 Lutron Electronics Co., Inc.

products and services, and the innovation that puts our customers on the inside track to tomorrow’s standards.  Visit www.lutron.com or call us toll free at 877.258.8766.

I N D UST R I A L CON T ROL & A U T OM A T I ON S YST E M S

I CS 14-2004 I ndustrial Control and Systems: Application Guide for Electric Fire Pump Controllers Provides general guidelines for the proper application of fire pump controllers, stressing those considerations specific to fire pump installations. Downloadable from www.nema.org. Price: $58.00 I CS 15-2004 I ndustrial Control and Systems: I nstructions for the Handling, I nstallation, Operation, and Maintenance of Electric Fire Pump Controllers Rated Not More than 600V Provided to facilitate movement, handling, installation, and maintenance of electric fire pump controllers at the job site and to help avoid personal injury and equipment damage during these processes. Includes information about handling; storage; installation of conduits, cables, and wir es; pre-energization and energization; and care and maintenance. Downloadable from www.nema.org. Price: $55.00 I CS 16-2001 I ndustrial Control and Systems: Motion/Position Control Motors, Controls, and Feedback Devices Covers rotational electric servo and stepper motors and their power requirements, feedback devices, and controls intended for use in a motion/position control system that provides precise positioning, speed control, torque control, or in any combination thereof. Downloadable from www.nema.org. Companion Standards MG 1, MG 2 Price: $198.00

46

I CS 18-2001 Motor Control Centers Applies to three phase 50 and 60 hertz motor control centers rated not more than 600 volts AC. Downloadable from www.nema.org. Companion standard: I CS 3 Price: $62.00 I CS 19-2002 I ndustrial Control and Systems: Diagrams, Device Designations, and Symbols Provides guidelines for representation of devices on diagrams and drawings in a standardized manner. Downloadable from www.nema.org. Price: $72.00 ANSI/NEMA I CS 61800-1-2002 Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements— Rating Specifications for Low Voltage Adjustable Speed D.C. Power Drive Systems Applies to general purpose adjustable speed DC drive systems which include the power conversion, control equipment, and also a motor or motors. Excluded are traction and electrical vehicle drives. Approved as an American National Standard. Price: $119.00 I CS 61800-2-2005 Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements— Rating Specifications for Low Voltage Adjustable Frequency A.C. Power Drive Systems Applies to general purpose adjustable speed a.c. drive systems which include power conversion, control equipment, and also an a.c. motor or motors. Excluded are traction and electrical vehicle drives. It appli es to systems connected to line voltages up to 1 kV a.c., 50 Hz or 60 Hz, and load side frequency up to 600 Hz. Price: $113.00

2006 EL ECTRICAL STANDARDS & PRODUCT GUI DE

I CS 61800-4-2004 Adjustable Speed Electrical Power Drive Systems: Part 4: General Requirements—Rating Specifications for A.C. Power Drive Systems Above 1000 V A.C. and not Exceeding 35 kV Applies to power drive systems with converter voltages (line-to-line voltage), between 1 kV a.c. and 35 kV a.c., input side 50 Hz or 60 Hz, and load side frequencies up to 600 Hz. Price: $133.00

I NSULATI NG PRODUCTS ANSI C29.1-1988 (R2002) Test Methods for Electrical Power Insulators Comprises a manual of test methods to be followed in making tests to determine the characteristics of electrical power insulators. I ndividual tests shall be made only when specified. Price: $46.00 ANSI C29.2-1992 (R1999) I nsulators—Wet Process Porcelain and Toughened Glass Suspension Type Covers suspension-type insulator s, 41/4 inches (108 millimeters) in diameter and larger, made of wet-process porcelain or of toughened glass and used in the transmission and distribution of electrical energy. Price: $46.00 ANSI C29.3-1986 (R2002) Wet Process Porcelain I nsulators (Spool Type) Covers spool-type insulators made of wet-process porcelain and used in the transmission and distribution of electric energy. Price: $36.00

NEMA