Manual Mother Cx h81-m1

Conectores internos

Dual-channel, 2 Slots, Non-ECC, Unbuffered, 240 pin DDR3, Max. up to 16GB for all.

PS/2 KB/MS ports

Types: 1066/PC3-8500, 1333/PC3-10600, 1600/PC3-12800

Graphics

12

ROM Recovery

Realtek ALC662 Gigabit : Realtek RTL8111G

BUZZER Memory sockets

Serial Port/ Display (DVI) port

2 x PCI slots LAN

COM

2x SATA III connectors

Storage

10

Display (VGA)/ HDMI ports

2x SATA II Connectors 8 x USB 2.0 ports, 12/480Mbps

USB

ATX power connector

7

2 x USB 3.0 ports, 5Gbps 1x PS/2 Mouse/Keyboard

LAN (RJ-45) port & USB3.0 ports

4x USB2.0 ports

USB2.0 connector

System FAN 14

1x ATX power connector

10

1x Front panel audio connector 1x Front panel connector 8

1x Internal serial port connectors 1x TPM (Trusted Platform Module) connector

SATA3.0/2.0 connectors

PCI slots

1x Chassis intrusion connector

7

Front panel connector

1x ME Update

BIOS

SPI 64Mb (AMI)

Form factor

uATX, 9.6inches x 7.5 inches

1

2

SPDIF_OUT

Front panel audio connector

Conectores del panel trasero Display (VGA) port

A

LAN (RJ-45) port

B

6

CLEAR CMOS

3 2 1

3 2 1

Normal (Default)

Clear CMOS

Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts

A

INTRUDER Clear CMOS

FLASH OVERRIDE (Intel Management Engine) SELECTOR FLASH_OVERRIDE 1

1

2

2

Enable (Default)

USB3.0

Disable

13

ATX CPU POWER CONNECTOR

ATX_CPU

ROM RECOVERY CONNECTOR

SPI_CS# SPI_MOSI SPI_MISO

SPI_CS +3P3VSB GND

SPI_CLK

ATXPOWER

Ground +12V_CPU

USB2.0

5

11

Ground +12V_CPU

Pink: Mic Input

HDMI ports

4

Serial port TPM header FLASH header OVERRIDE

B

Clear CMOS

Lime: Front L/R Output

Display (DVI-D) port

3

LPT header

Selectores de función

Blue: Line Input

Keyboard (PS/2) Port

F_USB3 F_USB2

SATA1

UEFI

14

12

CPU FAN CONNECTOR

Ground CPU FAN PWR CPU FAN TACH CPU FAN PWM

1x Clear CMOS selector & 1x Clear password selector

SERIAL Port

+SBV USB*(-) USB*(+) Ground NC

SATA2

ATX POWER CONNECTOR +3 Volts +12 Volts +12 Volts +5V Standby ATX_PWRGD Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts

2 x USB 2.0 connectors

Mouse (PS/2) Port

+SBV USB*(-) USB*(+) Ground

PCI Express slot (x1)

4x SATA connectors

Internal Selectors

USB CONNECTORS

SATA3

FRONT PANEL

1x System fan connector Internal connectors

9

SATA3.0/2.0 CONNECTORS

PWRBTN PLED

PCI Express slot (x16)

1x CPU fan connector

INTRUDER

SATA4

PLED(+) PLED( - )

9

Audio jacks

1x ATX CPU power connector

PWR Ground

1x LAN (RJ-45) port + 2x USB2.0 ports 3x Audio jacks (5.1 CH)

8

FRONT PANEL CONNECTOR HDLED(+) HDLED( - ) Ground Reset NC

1x Display (DVI) port 1x HDMI port

TPM

RESET HDLED

USB 2.0 ports

1x Display (VGA) port Rear Panel I/O ports (Depending on Model)

INTRUDER

GND

1 x PCI Express slot (x1)

NC LAD2 LAD1 GND NC SERIRQ GND SMB_CLK_MAIN

1 x PCI Express slot (x16)

Audio

6

11

Integrated Graphics

Expansion slots

TPM (Trusted Platform Module) CONNECTOR

Ground SATA_RX(+) SATA_RX(-) Ground SATA_TX(-) SATA_TX(+) Ground

Memory

CPU fan connector

13

Intel H81

DDCD*# TTXD* Ground RRTS*# RRI*#

Chipset

5

RRXD* DDTR*# DDSR*# CCTS*#

TDP: 95W

INTERNAL SERIAL PORT CONNECTOR

CK_33M_TPM LFRAME# PLTRST# LAD3 +3P3V LAD0 LDREQ0# +3P3VSB GND LPCPD#

ATX CPU power connector

Intel socket 1150

CPU Socket

4

PARAELLE

Ground INTRUDER#

Diseño de Motherboard

INTERNAL PARAELLE PORT CONNECTOR

NC Ground Ground Ground Ground Ground Ground Ground Ground SLIN# PINIT# ERROR# AFD#

SPDIF_OUT

F_AUDIO

Especificaciones

3

SPDIF_OUT CONNECTOR

MIC*_L MIC*_R LINE*_R GND LINE*_L

• Especificaciones • Selectores de función • Diseño de Motherboard • Conectores internos • Conectores del panel trasero

2

SLCT PE BUSY ACK# SPD7 SPD6 SPD5 SPD4 SPD3 SPD2 SPD2 SPD1 SPD0 STB#

GND F_AUDIO_DET# MIC*_RTU

Contenidos

FRONT PANEL AUDIO CONNECTOR

+5V

1

Ground SPDIF Out

Referencia de diseño de Motherboard

LINE*_RTU

CX

H81-M1 Series

CPU_FAN

SYSTEM FAN CONNECTOR

Ground SYS FAN PWR SYS FAN TACH SYS FAN PWM

SYS_FAN

Indicadores LED del puerto LAN Left (ACTIVITY) Green: Activity Off: No activity

LAN port

Right (LINK) Orange: 1G Link Green: 100M Link Off: 10M Link

Para borrar los ajustes de usuario CMOS RTC RAM: 1. Apague el ordenador y desconecte el cable de alimentación. 2. Mueva el jumper para borrar el BIOS por 5 a 10 segundos, luego mueva jumper por defecto. 3. Conecte el cable de alimentación y encienda el equipo. 4. Durante el proceso de arranque, entrar en la configuración del BIOS para volver a entrar en la configuración del usuario.

Soporte técnico: 0810 - 7777 - 247

www.redcx.com contacto@redcx.com Las imágenes son sólo ilustrativas.