Cameron - 2000 Cameron Catalog

Y2K Catalog home page

2/2/00

4:04 PM

Page 1

2 0 0 0 C A M E R O N C ATA L O G

MAIN MENU

Connect With Cameron CAMSERV ™ Aftermarket Services Drilling Subsea Production Surface Production API Gate Valve And Actuators Cameron Willis Chokes Cameron Controls Cooper Cameron Valves Additional Cameron Resources

Click the Cameron Logo on any page to return to the Main Menu

136

CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

Connect With Cameron

Table of Contents CAMSERV Aftermarket Services . . . . 137 Drilling . . . . . . . . . . . . . . . . . . . . . . . 140 Subsea Production . . . . . . . . . . . . . . 147

CONNECT C O N N E C T

Surface Production . . . . . . . . . . . . . . 153 API Gate Valve and Actuators . . . . . 158 Cameron Willis Chokes . . . . . . . . . . . 162 Cameron Controls. . . . . . . . . . . . . . . 164 Cooper Cameron Valves . . . . . . . . . . 166

Cameron is a name that is unsurpassed for quality, dependability and technology in the oil and gas industry today. As a leader in the industry, Cameron provides total system solutions for both drilling and production applications. But, while other suppliers are content to simply supply equipment, Cameron provides so much more. Like our worldwide network of CAMSERV Service Centers. And our comprehensive internet site. Our preengineered MOSAIC subsea production system. Decades of experience. Industry standard products like the U BOP. Electronic commerce. Project management. Proprietary elastomers from Cameron Elastomer Technology. Brand names you know and trust Cameron, Willis, W-K-M - to name a few. Highly trained service technicians. Ongoing research and development projects. Award-winning technology. The list goes on and on, much more than

This catalog offers an introduction to Cameron systems and products. For additional information on products in this catalog or products which do not appear on these pages, Cameron has a myriad of additional resources available to you. Whether you prefer information in electronic or printed format; on the Internet or CD ROM; on your desktop or on your library shelf; Cameron can get you the comprehensive information you need quickly.

Electronic Information Cameron maintains a comprehensive website at www.camerondiv.com. Cameron offers more than 50,000 pages of information on all product lines: Drilling, Surface, Subsea, Aftermarket, Cameron Controls, Cameron Willis, and Cooper Cameron Valves. The most powerful tool available to Cameron customers via the website is the Transact section. Transact is a secure extranet within the Cameron website available only to Cameron customers. Future Transact features include E-Commerce which will soon enable authorized customers to place orders from their desktop. Current sections within Transact are: • Technical Library - access operation and maintenance manuals, engineering bulletins and reports, assembly and testing procedures, inspection criteria, technical papers, and experience lists. • Parts and Pricing - review the list prices of Cameron standard products. • Training - access fully interactive, dynamic product-specific training modules which include installation procedures and service requirements. • Mainframe Access- read product bills of material, verify revision status, check customer property, review consigned inventory levels, and much more in the Cameron SAP database. • Document Ordering System - order free printed brochures or download Acrobat .pdf files to print to your local printer.

Printed Information Cameron maintains a comprehensive library of sales and marketing brochures and catalogs in printed format. Customers can utilize one of several alternatives to obtain these materials. • Internet - customers can access the Cameron Document Ordering System to receive free, printed copies of brochures via the mail or they can email Cameron at [email protected] to request specific product brochures. • Phone or Fax - customers can receive product brochures by telephoning the Cameron Marketing Communications epartment in Houston at 713-939-2711 or by faxing 713-939-2735. • Cameron Sales Force - Customers can contact their local Cameron representative who can order brochures to be mailed directly to them anywhere in the world. Cameron offers training CDs on many of its products and services. Customers can order these CDs through local sales representatives.

CD ROMs This catalog, along with other Cameron sales and marketing information, is available on CD ROM. Customers can order the CD catalog via the Internet, phone or fax or through the Cameron sales force. In addition, Cameron offers a library of training CD ROMs on many of our products.

• Projects - review project management information such as planning and scheduling, document control, costs expended, status reports and engineering deliverables.

we could possible present in one catalog. So, whether you need a single gate valve, or an entire system from the BOP stack to the controls, put Cameron to work for you.

© CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM


137

CAMSERV ™ Aftermarket Services

Cameron’s CAMSERV Aftermarket Services program

Through-Life Cost Management (TLC)

Customer Equipment Reconditioning - CAMSERV

has redefined the term “oilfield service.”

TLC is a comprehensive program to reduce the Total

Service Centers offer a full range of equipment

CAMSERV provides the most comprehensive

Cost of Ownership. TLC Starts at equipment acquisi-

repair services for all types and brands of oilfield

offering of aftermarket products and services in the

tion and covers ownership, usage, maintenance and

equipment. In addition to disassembly, inspection,

industry today. Each CAMSERV option is designed to reduce the Total Cost of Ownership and to offer unmatched value in service after-the-sale. And, when used in combination, these options can significantly reduce CAPEX and OPEX costs for

finally, disposal. It is truly a “cradle to grave” perspective. Cameron can develop TLC programs for anything from annual

re-assembly and testing services, Cameron provides machining, welding, heat-treating and other re-manufacturing operations. Cameron offers

maintenance agreements to global

reconditioned products in first class, fit for function,

alliances. These programs can

and working condition performance standards.

contain any number of CAMSERV options, depending on customer needs.

our customers worldwide.

Customer Property Management - Property management services can be arranged to extend

CAMSERV Advantage Program

and complement existing warehousing capabilities.

centers located in every major oil and gas producing

CAMSERV Advantage is an incentive program

Services provided include storage/warehousing,

region of the world and continues with Cameron’s

designed to encourage customers to maximize their

equipment utilization services, brokering and equip-

team of service technicians. In addition, many new

savings by utilizing a full array of CAMSERV service

ment buy-back.

and innovative programs have been added which

options. Due to the complex nature of aftermarket

make CAMSERV the premier aftermarket program in

service needs, CAMSERV facility managers are autho-

Reconditioned Equipment - Reconditioned drilling

the industry.

rized to customize CAMSERV

and production equipment meeting API standards

Advantage packages

is available in a broad range of products including

CAMSERV begins with a network of service

CAMWARE™

Software

to meet individual

blowout preventers, choke manifolds, well-

Cameron’s CAMWARE Asset Management Software

customer require-

heads, gate valves, and Christmas trees.

is designed to track, manage and report on customer

ments. CAMSERV

Reconditioned equipment can be obtained

equipment from acquisition to disposal. CAMWARE

Advantage incentives

through direct purchase, equipment

is available in versions for operators and drilling

may include pricing frame

contractors, and for mainframe computers or PCs.

agreements, volume discounts, consignment

CAMWARE provides a full history of all serialized

exchange or rental.

programs, electronic information interfaces or

Replacement Parts - CAMSERV Service Centers

equipment, including maintenance and performance

faster turnarounds. Individual CAMSERV Advantage

stock replacement parts (new and reconditioned)

factors. CAMWARE can track a variety of items

options may include:

such as next-scheduled service, status of completed

for many Cameron products for immediate delivery. Less frequently needed items or parts for older

service jobs, recommended maintenance, well condi-

Field Services - CAMSERV field service technicians

equipment can be quickly located through our

tions, well performance, inventory control including

are on call 24-hours a day, 7-days a week to handle

Global Product Search Engine (GPSE). In addition,

certificate numbers, document references, part

on-site service needs. These people are highly skilled

a secure, restricted-access “Transact” section of the

numbers and serial numbers. The system can even

in providing installation assistance, making field

Cameron website has been set-up to offer electronic

reference a storage location for original documents.

repairs and performing routine, scheduled mainte-

ordering of many types of replacement parts.

nance. They also provide technical support and well services such as decompletion, recompletion, trim changes and installation of safety equipment.


138



139

Worldwide CAMSERV Service Centers A R C T I C

•

O C E A N

• •

•

•

• ••

P A C I F I C O C E A N

• •

• • • • • •

•

• •

• • •• • • • •

•

•

• • •

• ••• •• • • •• ••• ••• • •

•

•

•

A T L A N T I C

•• • • •

O C E A N Worldwide Presence Cameron maintains a worldwide network of sales, service and manufacturing facili-

• P A C I F I C

• • • •

O C E A N

••

ties. Each facility is strategically located

••

•

• • ••

to meet the specific meets of the customers

•• ••

•

in the area.

•

Cameron’s management matrix gives

I N D I A N

•

customers two groups of people directly

•• •

O C E A N

•

accountable to their business - one by geographic location, another by product line.

•

Cameron geographic business units

••

include the Western Hemisphere, based in Houston, Texas; the Eastern Hemisphere,

• Legend Cameron Geographic Regions

based in London, England; and Asia

•

Pacific/Middle East based in Singapore.

•

Separate product business units for drilling,

Western Hemisphere

Asia Pacific/ Middle East

surface production, subsea production,

Cameron Worldwide Locations

aftermarket services, chokes, and controls

Service Centers and Manufacturing Plants

remain focused on individual product lines.

Sales Offices

•

•

Eastern Hemisphere

•

•

ecat section pages

1/13/00

5:52 PM

Page 1


Drilling

Table of Contents

Products Overview . . . . . . . . . . . . . . . . . . . . . . . .140 Drilling Capabilities Overview . . . . . . . . . . . . . . .141 Surface Drilling Systems . . . . . . . . . . . . . . . . . . . .142 Cameron BOP Stack . . . . . . . . . . . . . . . . . . . . .142 Choke Manifold . . . . . . . . . . . . . . . . . . . . . . .142 BOP Control System . . . . . . . . . . . . . . . . . . . .142 Subsea Drilling Systems . . . . . . . . . . . . . . . . . . . .143 Subsea Drilling System Components (Surface) Control System . . . . . . . . . . . . . . . . . . . . .143 Choke System . . . . . . . . . . . . . . . . . . . . . .143 Riser System . . . . . . . . . . . . . . . . . . . . . . .143 Subsea Drilling System Components (Subsea) Control System . . . . . . . . . . . . . . . . . . . . .143 Riser System . . . . . . . . . . . . . . . . . . . . . . .143 Lower Marine Riser Package . . . . . . . . . .143 BOP Stack . . . . . . . . . . . . . . . . . . . . . . . . .143

Ram-Type BOPs TL™ BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 U™ BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 UM™ BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 Annular BOP DL Annular BOP . . . . . . . . . . . . . . . . . . . . . . .144 Rams and Ram Packers FlexPacker™ . . . . . . . . . . . . . . . . . . . . . . . . . . .145 FlexPacker-NR™ . . . . . . . . . . . . . . . . . . . . . . . .145 Dual Bore FlexPacker . . . . . . . . . . . . . . . . . . .145 VBR-II™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 Inserted Packer for Stripping and Snubbing . .145 CAMRAM 350™ Packer . . . . . . . . . . . . . . . . . .145 Cameron Elastomer Technology . . . . . . . . . . . . . .145 Collet Connectors Model 70 Collet Connector . . . . . . . . . . . . . . .146 HC Collet Connector . . . . . . . . . . . . . . . . . . . .146 DWHC Collet Connector . . . . . . . . . . . . . . . . .146 Riser Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146


140


Products Overview

Drilling Surface Drilling Systems

Subsea Drilling Systems

Ram-Type BOPs TL BOPs UM BOPs U BOPs

Ram-Type BOPs TL BOPs UM BOPs U BOPs

Rams Shearing Bind Rams DVS Shear Rams Super Shear Rams VBR-II Variable Bore Rams FlexPacker Rams Dual FlexPacker Rams Pipe Rams

Rams Shearing Blind Rams DVS Shear Rams Super Shear Rams VBR-II Variable Bore Rams FlexPacker Rams Dual FlexPacker Rams Pipe Rams

Ram Packers and Top Seals CAMRAM CAMRAM 350 CAMLAST Low Temperature Stripping and Snubbing

Ram Packers and Top Seals CAMRAM CAMRAM 350 CAMLAST Low Temperature Stripping and Snubbing

Annular BOPs Single and Double DL Annular BOPs

Annular BOPs Single and Double DL Annular BOPs

Connectors FastLock Connectors FastClamp Connectors FlangeLock Connectors API Clamps

Connectors DWHC Collet Connector HC Collet Connectors HCH4 Collet Connectors Model 70 Collet Connector

Choke Manifold Systems Hydraulic and Manual Drilling Chokes H2 and H2I Adjustable and Positive Chokes Hydraulic and Manual Gate Valves Tailrod Gate Valves MS Check Valves J-2 Pressure Transmitters Buffer Tanks

Choke Manifold Systems Hydraulic and Manual Drilling Chokes H2 and H2I Adjustable and Positive Chokes Hydraulic and Manual Gate Valves Tailrod Gate Valves MS Check Valves J-2 Pressure Transmitters Buffer Tanks

Control Systems Hydraulic

Control Systems Hydraulic Multiplex Acoustic Deadman (DMS)

This product overview represents the Cameron preferred products for surface and subsea drilling applications. Not all products which appear on this list are represented in this catalog. For additional information, contact the Cameron website at camerondiv.com or contact your Cameron representative.

Riser Systems LoadKing Riser Systems LoadKing Riser Connectors and Joints LoadKing Spiders LoadKing Manual and Hydraulic Running Tools RF Riser Systems RF Riser Connectors and Joints RF Spiders RF Manual and Hydraulic Running Tools Telescoping Joints Goosenecks Riser Fill-Up Valves Termination Spools Instrumentation Joints Flex Joints RST Swivel Tensioning Rings



141

Drilling Capabilities Overview

Cameron Drilling Systems Delivered Worldwide for Varied Applications Cameron has designed, manufactured and delivered surface and subsea drilling systems from the wellhead through the manifold to meet a wide variety of customer requirements and drilling applications. These systems are on their way to projects from Africa to the Gulf of Mexico, and represent Cameron system solutions and their array of design configurations. Varied Drilling Applications Cameron has delivered complete drilling systems for drillships, semisubmersibles, platforms and jackups. These rigs have rated water depths from several hundred to over 10,000 feet and operate from 5000 to 15,000 psi working pressure.

Riser Systems The Cameron LoadKing and RF riser systems are being utilized on several of these rigs to meet the demands of drilling in deepwater. Both riser systems accommodate high tension loads and provide for multiple control lines.

retrievable MUX pods. The popularity of the Cameron MUX control system has made Cameron Controls the industry leader in the supply of drilling control systems. Cameron Controls also offers direct hydraulic control systems for subsea and land applications.

BOP Stack Systems The vast majority of these rigs are using Cameron’s 18-3/4” TL BOPs in 4-, 5- and 6- cavity body styles. BOP Stack systems also include Cameron collet connectors including the Model 70, HC, DWHC and HCH4 designs.

Control Systems Many of the control systems used on these rigs are Cameron Controls’ Multiplex (MUX) BOP Control Systems. Cameron’s MUX system features the lightest weight, most compact pod in the industry today. In addition, Cameron offers the industries only fully

Choke Manifold Systems Cameron has also provided the manifold systems for these drilling rigs. Cameron provides complete manifold systems from the surface panels to the chokes, valves, actuators and pressure transmitters.

Cameron Puts Experience to Work to Develop New and Innovative Solutions for Future Challenges Cameron’s vast experience with both drilling and production systems provides a unique opportunity to design and manufacture integrated systems specifically designed to optimize customer operations. Cameron has provided, designed, or is actively designing Free-Standing Production Riser Systems, Free-Standing Drilling Riser Systems, systems designed for SPAR/TLP applications and Slender Well Systems.

Hybrid (Free-Standing Production) Riser System Cameron’s Free-Standing Production Riser System (FSPR) represents an economical alternative to traditional deepwater development concepts including the steel catenary riser system. Cameron’s FSPR was installed in 1521 feet (463 meters) of water for an early production system, later retrieved, modified and rerun in 2096 feet (639 meters) of water for a deeper field. This represents the only hybrid riser system installed. Cameron can now supply various hybrid riser options for the free standing riser including towed-out and up-ended and stalked-in designs. Cameron’s options offer the opportunity to decrease the risks and costs typically associated with steel catenary riser systems particularly for the larger deeper fields. The FSPR system was the winner of the 1989 Petroleum Engineer International Meritorious Award for Engineering Innovation. Free-Standing Drilling Riser System Based on the field-proven Free-Standing Production Riser System, Cameron’s Free-Standing Drilling Riser System (FSDR) provides an alternative to the timeconsuming operation of drilling riser deployment and retrieval in deepwater. In this system, a retrievable upper section and a free-standing lower section are mated 300 to 500 feet (91 to 152 meters) below the surface of the water. When disconnect is required, either in an

Hybrid (Free-Standing Production) Riser System

emergency or for standard rig operations, the upper section is retrieved and the lower section is left to free-stand on the ocean floor. The retrievable riser section can be pulled in several hours, saving rig time during both retrieval and redeployment. Cameron’s free-standing drilling riser is the winner of the prestigious 1999 Petroleum Engineer International Meritorious Award for Engineering Innovation and provides savings by increasing the operating window, lowering development drilling costs and lowering maintenance costs.


SPARs and TLPs Cameron has the unique ability to provide a total system for a SPAR or tension leg platform (TLP). Cameron systems are based on field experience and represent the most efficient, cost-effective systems possible for each individual application. Cameron’s broad scope of supply includes subsea, platform and adjustable wellhead systems, BOP stacks, drilling and production risers (including free-standing, integral and non-integral systems), completion systems, subsea manifolds, connection systems, and drilling and production control systems. Each component, as well as the total system is designed based on the best individual solution for each specific field application. Cameron designs are backed by numerous computer based analysis programs, basin testing and prototype testing, all based on field data collected from instrumentation packages. Slender Well Systems The industry trend today is to look for ways to utilize second or third generation vessels for deepwater. Cameron’s Slender Well Systems provide the contractor with the opportunity to do just that. With Cameron’s wellhead, small bore BOP stacks, and reduced bore riser systems, variable deck loads and tension requirements are substantially reduced, and the drilling process is optimized to reduce drilling time.


142

Surface Drilling Systems

Surface Drilling System Components Cameron has a definite advantage in the supply of complete drilling systems for surface applications. From the BOP to the control system, the manifold to the wellhead, Cameron offers a variety of systems to meet different requirements. Cameron components for surface systems include all the following: Cameron BOP Stack 1. Annular BOP 2. Double Ram-Type BOP 3. Drilling Spool 4. Manual Gate Valve 5. Hydraulic Gate Valve 6. Check Valve 7. Single Ram-Type BOP 8. Casing Head Spool 9. Casing Head Housing Choke Manifold 10. Transmitter 11. Pressure Gauge 12. Manual Gate Valve 13. Hydraulic Gate Valve 14. Drilling Choke 15. Choke Control Console 16. Standpipe Pressure Gauges, Gate Valves, Transmitter BOP Control System 17. Closing Unit 18. Pipe Rack 19. Remote Control Panel 20. Mud Pumps and Manifold, Pressure Gauges 21. Mud Tanks, Mud Valves, Degasser

15

19 16

1 21

20 2 11

10 6 17

18

4

3 5 7 8

13

14

12

9

SD5211-96


143

Subsea Drilling Systems

4

5

6

7

2

Riser System

1

1

8 5 3 4

6 SD24454

Cameron supplies integrated subsea drilling systems designed specifically to tackle the demands of deepwater, high pressure applications including BOP stack systems, control systems, riser systems and choke systems. Cameron subsea drilling components include the following: Subsea Drilling System Components (Surface) Control System 1. Auxiliary Remote Control Panel and Battery Bank 2. Driller’s Panel 3. Hydraulic Power Unit 4. Accumulator Bank 5. Hose/Cable Reels Choke System 6. Choke Manifold 7. Choke Manifold Control Console Riser System 8. Telescoping Joint

7

8 2

3 9

Stack System

10

Subsea Drilling System Components (Subsea) Control System 1. Hydraulic Conduit Supply Line 2. MUX Control Pod 3. Conduit Valve Riser System 4. Riser Joint 5. Riser Connector 6. Termination Spool Lower Marine Riser Package 7. Flex Joint 8. Annular BOP 9. Choke/Kill Connector BOP Stack 10. Subsea Gate Valve 11. Double Ram-Type BOP with Super Shear 12. Double Ram-Type BOP 13. Guide Structure 14. Collet Connector

11

13

12

14

© CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM SD24450-96

144


Ram-Type and Annular BOPs

Cameron developed the TL and UM ram-type BOPs based on the highly successful U BOP design to meet today’s demand for reduced weight, lower height and easier maintenance. Cameron also makes the DL Annular BOP which features a lightweight, low profile design available in single or double body styles.

Body Styles: Pressure-Energized Rams: Bonnet Seal Carrier: Hydromechanical Lock:

TL™ BOP The TL BOP integrates all of the design features of Cameron’s popular T and U BOPs into a lightweight unit. The TL offers side ram removal and other features which reduce maintenance and rig time.

Hydraulically Opening Bonnets:

Application: Surface and subsea Bore Sizes and Working Pressures: 18-3/4” 5000, 10,000, 15,000 psi 13-5/8” 10,000 psi Body Styles: Single, double, triple Pressure-Energized Rams: Yes Bonnet Seal Carrier: Standard Hydromechanical Lock: RamLocks (5000, 10,000, 15,000 psi WP) ST Lock (10,000, 15,000 psi WP) Wedgelocks (5000 psi WP) Hydraulically Opening Bonnets: Yes Bonnet Studs Instead of Bolts: Yes

Single, double Yes Available Wedgelocks (with pressure balance chambers) Yes

UM™ BOP The UM BOP is a lightweight BOP designed for easy maintenance and long life. The UM complements the existing line of U preventers and includes bonnets which can be installed on any comparable size U BOP. Application:

Surface, subsea, snubbing (7-1/16” only) Bore Sizes and Working Pressures: 7-1/16” and 11” 3000 - 15,000 psi Body Styles: Single, double Pressure-Energized Rams: Yes Bonnet Seal Carrier: Available Hydromechanical Lock: Wedgelocks Hydraulically Opening Bonnets: Yes Bonnet Studs Instead of Bolts: Yes

U™ BOP The Cameron U BOP is the most widely used ram-type BOP in the world and offers the widest range of sizes of any Cameron ram-type BOP.

DL Annular BOP The Cameron DL annular preventer features a quick-release top for quick packer change-out. It is shorter in height than comparable annulars.

Application: Surface and subsea Bore Sizes and Working Pressures: 7-1/16”, 11”, 13-5/8” 3000 - 15,000 psi 16-3/4” 3000 -10,000 psi 18-3/4” 10,000 psi 20-3/4” 3000 psi 21-1/4” 2000, 5000, 10,000 psi 26-3/4” 3000 psi

Application: Bore Sizes and Working Pressures: Body Styles: Packer:

Surface and subsea 7-1/16”- 21-1/4” 2000 - 20,000 psi Single, dual High performance CAMULAR™

SD24361

UM Blowout Preventer

SD24877

TL Blowout Preventer (Shown With RamLocks)

SD5308 SD24889

U Blowout Preventer

DL Annular Blowout Preventer © CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM


145

Rams and Ram Packers

Cameron offers the most comprehensive line of rams and ram packers in the industry. Cameron rams cover the full range of drilling requirements including shearing high strength casing, drill collars, etc. Cameron also offers a choice of rams for variable bore sealing and high temperature applications. Cameron is known as a pioneer in variable bore sealing technology. The name variable bore ram (VBR) is synonymous with the Cameron VBR. Cameron has now introduced the second generation VBR, the VBR-II. This design offers even more packer life than the original design. In addition, Cameron offers the FlexPacker, FlexPacker-NR and the Dual Bore FlexPacker which provide sealing on specific multiple bore sizes and fit into existing ram blocks.

SD24363

SD10315

VBR-II™

FlexPacker™

Cameron Elastomer Technology One of the many ways to differentiate Cameron drilling products from other manufacturers’ is the elastomers used in critical sealing areas such as ram packers and top seals. Cameron drilling products exclusively use the proprietary elastomers designed and manufactured by Cameron Elastomer Technology (CET), located in Katy, Texas. CET provides engineered solutions to elastomeric material problems. For drilling applications, CET has developed CAMRAM™, CAMRAM 350™, CAMULAR™, CAMLAST™ and DUROCAM™ elastomer products to meet the rigorous demands of the oilfield. These products, when used in Cameron ram-type BOPs and annular BOPs, improve performance, extend service life, reduce downtime and lower operating costs.

SD24364

SD24413

FlexPacker-NR™

Inserted Packer for Stripping and Snubbing

SD016389

SD7395

CAMRAM 350™ Packer

Dual Bore FlexPacker

Cameron Ram Selection Chart Description Shearing Shearing Blind Rams DVS Shear Rams Super Shear Rams Variable Bore Sealing VBR-IIs FlexPackers FlexPacker-NRs * Dual Bore FlexPackers Pipe Rams Standard Service High Temperature Service Snubbing/Stripping Grip and Seal Rams Snubbing Insert Packers

TL BOP

UM BOP

U BOP

Elastomer

Per NACE

Available in Some Sizes Available in Some Sizes Available

Available Available in Some Sizes Available in Some Sizes

Available Available in Some Sizes Available

CAMRAM Nitrile CAMRAM Nitrile See Note

Yes Yes No

Available in Some Sizes Available in Some Sizes Available in Some Sizes Available in Some Sizes



CAMRAM Nitrile CAMRAM Nitrile CAMRAM Nitrile CAMRAM Nitrile

Yes Yes Yes Yes

Yes Yes

Yes Yes

Yes Yes

CAMRAM Nitrile CAMLAST

Yes Yes

Not Available Not Available

7” Only 7” Only

Not Available Not Available

CAMRAM Nitrile CAMRAM Nitrile

Yes Yes

Note: Super Shear Rams do not seal * Cameron also offers special hang-off FlexPacker-NR assemblies



146

Collet Connectors and Riser Systems

Collet Connectors As drilling depths have increased, Cameron collet connectors have evolved to address issues concerning higher internal and external pressures, increasing applied bending and tension loads and extreme operating conditions. Cameron offers four collet connectors: • • • •

Model 70 Collet Connector High Capacity (HC) Collet Connector Deepwater High Capacity (DWHC) Collet Connector HCH4 Collet Connector

The Model 70 is offered in sizes and pressure ratings for a wide variety of applications. The HC is similar to the Model 70 but is designed to provide greater preload to withstand higher separating forces. The DWHC is a high strength drilling and completion collet connector engineered for the high loads encountered in ultra deepwater applications. The HCH4 connector locks onto an H4 wellhead. All Cameron connectors offer high strength and stiffness with a direct load path through the connector and metal-to-metal sealing AX gaskets on the collet end ensure seal integrity. Positively driven-open collet segments during unlock ensure that no overpull is required to disconnect. A secondary unlock function is also included in each design.

Model 70

Collet Connector Model HC

DWHC

HCH4

Available Bore Sizes

13-5/8” to 21-1/4”

13-5/8” to 21-1/4”

18-3/4”

18-3/4”

Available Working Pressures

2000 - 15,000 psi

5000 - 15,000 psi

15,000 psi

10,000 - 15,000 psi

549,000 ft-lb

2,063,000 ft-lb

10,300,000 ft-lb

2,109,000 ft-lb

245,000 lb

4,385,000 lb

12,000,000 lb

4,740,000 lb

30˚

30˚

7˚

4˚

Availability and Performance

Bending at 10,000 psi WP, 2,000,000 lb Tension Preload Maximum Release Angle

Note: Data for the Model 70, HC and HCH4 represents 10,000 psi WP connectors.

SD24878

SD24880

SD24879

Model 70 Collet Connector

HC Collet Connector

DWHC Collet Connector

Riser Systems Cameron offers drilling riser systems which accommodate the stringent conditions encountered in deepwater drilling including high tension loads, multiple control lines, and the need to respond to changes in surface weather conditions. The LoadKing™ family of riser connectors is designed to meet the demands of ultra deepwater drilling in water depths of 7000 feet (2134 meters) or more. The RF riser connector is designed to meet API 16R requirements with fewer components and higher capacity than other flanged riser connectors. Description Rated Tension Load Auxiliary Lines

Trim

LoadKing

RF

3,500,000 lb

2,000,000 lb

Up to Six Positions Fixed 2”- 6-3/4” OD

Up to Six Positions Interchangeable 2” - 5-1/2” OD

API 16 R

API 16R NACE MR-01-75 SD24362

Riser System © CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

ecat section pages

1/13/00

5:52 PM

Page 2


Subsea Production

Table of Contents

Products Overview . . . . . . . . . . . . . . . . . . . . . . . .147

Dual Bore Production Systems . . . . . . . . . . . . . . .151

MOSAIC™ Subsea Production Systems . . . . . .148-149

Subsea Systems . . . . . . . . . . . . . . . . . . . . . . . . . . .152

SpoolTree™ Production Systems . . . . . . . . . . . . . .150


1-18 single page

11/4/99

2:14 PM

Page 13


147

Products Overview

S u b s e a P ro d u c t i o n MOSAIC Elements

Major Components

Variations

Position Elements

Drilling Guidebases Production Guidebases Templates Porches

Guideline, Guidelineless One, Two or Three-Slot Various Multiples of Guidebases

Pressure Elements

STM Wellhead

To 15,000 psi WP Five String, Six String Hub Profile, Mandrel Profile, DWHC Profile High Pressure Lockdown, Standard Lockdown To 10,000 psi WP Five String, Six String Hub Profile, Mandrel Profile Centric 15, Centric 15 EX, WMSW

STC Wellhead

Mudline Wellhead Distribution Elements

Flowbases Manifolds Valve Blocks Connectors Structure Porch Extensions Umbilical Termination Assemblies

Access Elements

SpoolTree Christmas Trees Dual Bore Christmas Trees Block Valves Gate Valves

Gate Valve Actuators Chokes

Choke Actuators

Satellite, Water Injector, Gas Lift, Daisy Chain Varies Depending on Number of Modules and Size and/or Quantity of Headers

HUTA, EUTA, CDU Guideline, Guidelineless Production, Gas Lift, Water Injection Guideline, Guidelineless Production, Gas Lift, Water Injection Up to 40 Wing Valve Arrangements Single or Double Master Valves FL or FLS Gate Valves Threaded, Flanged, Block Variety of Trims CM Actuator Non-Retrievable Retrievable with Clamp Connector Retrievable with Crown Connector Stepping Linear Choke Actuator (Pneumatic) Aqua-Torq Actuator (Hydraulic)

Control Elements

CAMTROL Advanced Multiplexed Control System

Up to 32 Hydraulic Functions Diver Assist, Guideline, Guidelineless or ROV

Connection Elements

Horizontal Vertical Diver-Assist ROV Structural Mooring

Pull In or Lay Away

Stab and Hinge

This product overview represents the Cameron preferred products for subsea production applications. Not all products which appear on this list are represented in this catalog. For additional information, contact the Cameron website at camerondiv.com or contact your Cameron representative. © CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

148



149

MOSAIC™ Subsea Production Systems

Today’s Cameron Modular Subsea And Integrated Completion (MOSAIC) systems build on Cameron’s long history of subsea success. MOSAIC systems are a combination of standardized components that fit together in a modular fashion. In the MOSAIC system, six basic elements or component “families” have been designated.

combination of four or more guidebases into a single, pre-tested unit. Any number of wells can be accommodated through multiples of the three basic guidebases. Position Elements are often combined with Distribution Elements, such as manifolds and umbilical termination assemblies, as complete, pre-engineered assemblies.

Position Elements MOSAIC Position Elements include drilling guidebases, production guidebases, templates and porches for other MOSAIC elements, like controls and remote connectors. Position Elements come guideline and guidelineless, with one, two or three slots and in sizes ranging from small for single satellite or offset wells to large, multi-well templates. Templates are simply the

Pressure Elements Subsea wellheads and pressure caps are categorized as Pressure Elements in the MOSAIC System. The primary Cameron wellhead is the STM™ Wellhead System, which is offered in standard and enhanced deepwater, high-capacity versions. The STM (single trip, metal-seal) wellhead is an all-purpose product for applications to 15,000 psi.

Distribution Elements Distribution Elements in the MOSAIC system include flowbases, manifolds and umbilical termination assemblies. These assemblies are used to receive produced fluids from multi-well templates or satellite wells in order to control, commingle and divert the flow to a production riser or pipeline. Pre-engineered MOSAIC flowbases are available for a variety of single well applications such as production satellite, water injector, gas lift production and intermediate daisy-chain base. For two wells or more, pre-engineered MOSAIC components can be configured into manifolds to be used with satellite producers, injectors, daisy-chains and combinations of these.

Access Elements Access Elements include subsea Christmas trees, workover risers, pig launchers and removable pigging loops. Cameron has redesigned its subsea tree products into modular assemblies utilizing pre-engineered subcomponents. These subcomponents provide operators with standardized assemblies, yet allow re-arrangement of the subcom ponents for flexibility in tailoring equipment systems to individual field requirements. Cameron currently offers a choice of two highly reliable and feature-rich Christmas trees in its MOSAIC system: the innovative Cameron SpoolTree subsea tree, and the Cameron dual bore conventional tree. A standard mudline tree configuration is also available.

Control Elements Control Elements supply power feedback, telemetry and logic to operate other MOSAIC elements. This MOSAIC family includes control systems, chokes, multiplex control modules or pods, Cameron HydraQuad™ couplers and ROV panels. The CAMTROL™ Advanced Multiplexed Subsea Production Control System offers a modular approach to controlling subsea systems. The system is applicable to many field conditions and can be easily adapted for use in deepwater or shallow water; with trees or manifolds; or with virtually any production scenario. The CAMTROL system uses common intervention methods for the installation and retrieval of the subsea control module,chokes, accumulator modules and multi-phase flow meters. Methods may

include diver-assist, diverless, guideline, guidelineless, ROV assisted and totally autonomous. The CAMTROL control module incorporates directional control valves which have been miniaturized and modularized into a single valve block capable of controlling four functions. Each module can accommodate up to eight directional control valves for control of 32 hydraulic functions.

Connection Elements Connection Elements include pipeline, flowline and umbilical connection systems and are typically used in horizontal, vertical, diver-assist or ROV-driven applications. MOSAIC Connection Elements utilize common interfaces which allow a variety of different types of connection systems to be attached.

SD24982

150


SpoolTree™ Production Systems

The Cameron SpoolTree Production System is one of the most widely used trees in the world and offers many time and cost saving advantages over conventional tree systems. Instead of the typical wellhead-hanger-tree stackup, the SpoolTree design has a wellhead-tree-hanger stackup. In this configuration, the Christmas tree consists of a concentric bore spool with a wellhead

connector below and a wellhead connector profile on top. The tubing hanger is hung off inside the spool on a dedicated load shoulder, and the valves are situated on the side of the spool. No valves are in the vertical bore of the wellhead/tree system. The completion is run after the tree is installed and the completion can be pulled with the tree in place and flowline connections undisturbed.

MOSAIC SpoolTree Production Systems can be configured with a wide array of component choices. The possible combinations of components, available pressure ratings and sizes are virtually endless. The result is a cost-effective system that can be adapted to virtually any subsea job.

SpoolTree Subsea Production System 1. Guidebase. For template or satellite installation. Guideline or guidelineless. Variety of connection types available. 2. Valve Actuator. 25 Compact Modular (CM) modules available. Sizes from 2” to 7”. To 15,000 psi WP . 3. Internal Tree Cap. WIth or without wireline plugs.

3

4. Tree Connector. Mechanical or hydraulic. Deepwater high capacity (DWHC) model available.

8 9

5. Wellhead. STM or STC wellhead. Metal-to-metal or metal end-cap seals. Five or six string configuration. Variety of casing programs. 6. Spool Body and Modular Gate Valve Assembly. Configured for various production applications. Cameron FL, FLS or FLS-R gate valves. Working pressures up to 15,000 psi.

6 7

2

4 10

7. Flowline and Pipeline Connection. Vertical, horizontal, diver assist or ROV. Common interfaces used throughout. 5

8. Tubing Hanger. Up to six hydraulic and two electrical penetrations. 3” through 7” completions.

1 SD24881

9. Subsea Choke. Diver-assist or diverless. Inserts are retrievable or non-retrievable (fixed). Crown or clamp connectors. 10. Control Module. Up to 32 hydraulic control points. Variety of intervention methods. 11. Debris Cap. (Not Shown) Weight set or hydraulic

Modular SpoolTree System Spool Body and Valve Assembly Configurations In the Cameron SpoolTree design,the spool body provides outlets to attach production, annulus and isolation valves for downhole functions and the electrical penetrator bonnet assembly. The tubing hanger landing shoulder is specially ported to accept control stabs and provides hydraulic continuity between the production control system and downhole hydraulics. The valves are contained both as an integral part of the spool body, and in mini-blocks external to the vertical bore of the tree. A typical valve cluster includes production and annulus master valve, production and annulus wing valve, crossover valve, workover valve and isolation valves for SCSSV, CIV and other requirements. Assemblies are available for 3” through 7” completions.

SpoolTree Production System

Basic

Production Choke

Chemical Injection

Annulus Crossover

Gas Lift Choke



151

Dual Bore Production Systems

The highly successful Cameron Dual Bore Production System has been the number one choice of operators for many years. More than 300 have been delivered worldwide since it was introduced in 1985. Today’s version has been reengineered for modularity and standard interfaces that have been added to ensure compatibility with a wide range of systems and components.

The dedicated annulus bore and vertical full-bore access to both the production tubing and annulus provide several advantages. The tubing casing annulus can be circulated and pressure bled off. This simplifies troubleshooting by enabling annulus monitoring for downhole pressure and temperature, sand production and tubing and packer leaks. Well servicing and well conversion are easier and rig hands are familiar with the running tools. In

addition, one or more electrical penetrators can be provided for downhole pressure and temperature gauges and for electrical submersible pumps. Versions of the dual bore tree are offered for 5000, 10,000 and 15,000 psi WP and water depths to 10,000 feet. They are used for oil and gas production, gas and water injection service on satellite wells, clusters or templates.

Dual Bore Subsea Production System 1. Guidebase. For template or satellite installation. Guideline or guidelineless. Variety of connection types available. 10

2. Valve Actuator. 25 Compact Modular (CM) modules available. Sizes from 2” to 7”. To 15,000 psi WP . 3. External Tree Cap. (Not Shown) WIth or without wireline plugs.

9

4. Tree Connector. Mechanical or hydraulic. Deepwater high capacity (DWHC) model available.

2

6

5. Wellhead. STM or STC wellhead. Metal-to-metal or metal end-cap seals. Five or six string configuration. Variety of casing programs. 6. Modular Valve Assembly. Total of 320 configurations available. Cameron FLS gate valves. Working pressures up to 15,000 psi.

4

7

7. Flowline and Pipeline Connection. Vertical, horizontal, diver assist or ROV. Common interfaces used throughout.

8 5

8. Tubing Hanger. Choice of tubing sizes, threads and wireline preps. Metal seals with resilient backup available. One to four SCSSC ports. With or without electrical penetrator. SD24882

1

Dual Bore Production System

Production

Production with Choke

Gas Lifted Production with Two Chokes

SD24883

Production with Internal Crossover

Production with Internal Crossover and Choke

Production with Choke and Annulus Connection


9. Subsea Choke. Diver-assist or diverless. Inserts are retrievable or non-retrievable (fixed). Crown or clamp connectors. 10. Control Module. Up to 32 hydraulic control points. Variety of intervention methods.

Cameron Dual Bore Production System Valve Assembly Configurations The Cameron Modular Dual Bore Tree has a total of 320 pre-determined master valve block assemblies to choose from, covering most system arrangements. Valve assemblies are available in 4", 5", or 6-3/8" nominal bore sizes with 5,000, 10,000 or 15,000 psi WP ratings. Valve assemblies feature field-proven Cameron FLS gate valves with onepiece gate, spring-loaded seats and corrosion-resistant, metal-to-metal seals for maximum sealing integrity. A choice of 40 valve module arrangements is available for each wing valve block, covering requirements for production, water injection and gas lift. The modules offer flexibility in location of crossover valve, chemical injection valve, etc. Master and swab valves are located in the well bore. Either commercial cartridge-type isolation needle valves or Cameron heavy-duty isolation needle valves can be used for chemical injection and control line isolation.

152


Subsea Systems

SD24966

MOSAIC Deepwater Cluster Manifold Production System

SD24963

7” x 2” Dual Bore Subsea Tree

SD24964

SD24967

World’s First 15,000 psi WP Subsea Tree

Four-Well Cluster Manifold System Deployed Through Moon Pool

SD24826

12” Cameron Vertical Connection (CVC) Rigid Pipeline Jumper System

SD24965

Ultra-Deepwater, High Capacity Guidelineless SpoolTree System


ecat section pages

1/13/00

5:52 PM

Page 3


Surface Production

Table of Contents

Products Overview . . . . . . . . . . . . . . . . . . . . . . . .153

Conductor Sharing Wellhead (CSW™) . . . . . . . . . .156

Conventional Wellhead Systems

SpoolTree™ Wellhead System . . . . . . . . . . . . . . . .156

S Conventional Wellhead System . . . . . . . . . .154 IC Convention Wellhead System . . . . . . . . . . .154 Compact and Multi-Bowl Wellheads Standard Snapring Modular Compact (SSMC™) Wellhead . . . . . . . . . . . . . . . . . . . . . . . . . .155

Adjustable Wellhead System . . . . . . . . . . . . . . . .156 Wellhead Connection Systems CAMFORGE™ Connection System . . . . . . . . . .157 FastLock™ Connector . . . . . . . . . . . . . . . . . . . .157

Metal Seal Split Compact Wellhead . . . . . . . .155

FlangeLock™ Connector . . . . . . . . . . . . . . . . .157

Multi-Bowl Wellhead System (MBS) . . . . . . . .155

FastClamp™ Connector . . . . . . . . . . . . . . . . . .157

Wellhead Seals . . . . . . . . . . . . . . . . . . . . . . . .155

SlipLock™ Connection System . . . . . . . . . . . . .157



Products Overview

S u r f a c e P ro d u c t i o n Components Wellhead Systems Conventional Compact Multi-Bowl Innovative

Mudline Suspension Geothermal

Completion Systems Single Completions Dual Completions Wellhead Connection Systems Cold Forged Mechanical

Gate Valves Slab-Style Gates

Expanding Gates

Gate Valve Actuators Pneumatic Hydraulic Hydraulic Wireline Cutting

Chokes Control Chokes Needle and Seat Chokes Multiple Orifice Valves (MOVs)

Choke Actuators Electric Stepping Linear Choke Actuator (SLCA )

Variations S Wellhead IC Wellhead Standard Snapring Modular Compact (SSMC) Wellhead Metal Seal Split Compact Wellhead MBS Wellhead Conductor Sharing Wellhead (CSW) SpoolTree Wellhead Adjustable Wellhead WMSW Centric 15 Centric 15 EX Conventional Compact

Standard (Single or Dual) Metal Sealing (MTBS) CD-2 Tubing Spool with CD-2, CD-2T, CD-2T-CL Hangers

CAMFORGE Wellhead Connection Systems SlipLock Connection Systems FastLock Connectors FastClamp Connectors FlangeLock Connectors

FL Gate Valves FLS Gate Valves FLS-R Gate Valves M Gate Valves M215 Gate Valves

MP Series Piston Saf-T-Gard Actuators MA Series Diaphragm Saf-T-Gard Actuators MH 70 Series Saf-T-Gard Actuators MH 60 Series Saf-T-Gard Actuators MSVW Saf-T-Gard Actuators MWH Saf-T-Gard Actuators

Plug and Cage Control Chokes External Sleeve Control Chokes H2 Classic Positive and Adjustable Chokes H2I Positive and Adjustable Chokes MC10 Choke MC20 Choke

Used on MOVs Used on Control Chokes

This product matrix represents the Cameron preferred products for surface production applications. Not all products which appear on this list are represented in this catalog. For additional information, contact the Cameron website at camerondiv.com or contact your Cameron representative.


153

154


Conventional Wellhead Systems

Cameron conventional wellhead systems provide the flexibility, compatibility and interchangability required for a wide range of applications. Both the S and IC wellheads consist of the lower casing head housing and hanger, and the subsequent casing head spools and hangers. Although the wellheads are not interchangeable, the S wellhead may be used in place of the IC wellhead for all applications. Both wellheads are compatible with most Cameron tubing spool and hanger configurations

S Conventional Wellhead System The Cameron S Conventional Wellhead System offers the industry’s highest capacity conventional spool-type wellhead and is designed for use with all well depths and all types of completions. It incorporates dual landing shoulders for maximum casing support. This wellhead is the preferred wellhead for the conditions noted in the chart below. Working Pressure: Operating Temperatures: Hang-Off Capacity: Casing Head Housings: Casing Head Spools: Casing Hangers: Tubing Spools and Hangers:

Up to 15,000 psi (Excluding tubing spool) -20°F to +250°F (-29°C to +121°C) Up to 80% of pipe body yield S, S-11, S-3 S, S-11, S-3 SB-3, SB-5, SB-6 slip and seal assemblies Standard spool: HT, HT-2, T, T-CL, C-SRL, C-SRL-CL hangers MTBS spool: MTBS hanger CD-2 spool: CD-2, CD-2T, CD-2T-CL hangers

IC Conventional Wellhead System The Cameron IC Conventional Wellhead System is the preferred wellhead for the conditions noted in the chart below. Although components are not interchangeable, the S Wellhead may be used in place of the IC wellhead for these applications as well. Working Pressure: Operating Temperatures: Hang-Off Capacity: Casing Head Housings: Casing Head Spools: Casing Hangers: Tubing Spools and Hangers:

Up to 10,000 psi (Excluding tubing spool) -20°F to +150°F (-29°C to +65°C) Up to 50% pipe body yield IC-2, IC-2-BP IC-2, IC-2-BP, IC-2-L IC-1, IC-1P, IC-2 slip and seal assemblies Standard spool: HT, HT-2, T, T-CL, C-SRL, C-SRL-CL hangers MTBS spool: MTBS hanger CD-2 spool: CD-2, CD-2T, CD-2T-CL hangers

Completion Systems Cameron offers a wide variety of tubing spools and hangers for all types of completions: single, dual and high pressure. Completion systems range from low pressure, conventional equipment to systems for severe service and geothermal applications. Like the S and IC wellhead components, all Cameron completion equipment meets or exceeds API 6A specifications. Cameron also offers a complete line of surface Christmas trees to suit all tubing programs for working pressures up to 30,000 psi.

SD24383

SD24384

IC Conventional Wellhead System

S Conventional Wellhead System

Casing Hanger Selection Chart How to Select a Cameron Wellhead System The first step in determining which Cameron wellhead system to use is to determine the casing hanger style that best suits the application. Each hanger profile is unique and is generally compatible with only a limited number of casing head/spool bowls. Cameron has a complete line of slip-type casing hangers divided into two types: SB and IC, each serving different applications.

250°F 121°C

A P I T E M P E R A T U R E

R A N G E

180°F 82°C

SB-5

150°F 65°C

SB-3 100°F 38°C

SB-6

IC -1 IC-1-P IC-2

U T S P 50°F 10°C

0°F -17°C -20°F -29°C 0

10%

20%

30%

40%

50%

60%

70%

80%

Hang-Off Capacity (% of Pipe Body Yield) (Operating conditions verified by API 6A, 17th Edition, Appendix F testing)



Compact and Multi-Bowl Wellheads

Standard Snapring Modular Compact (SSMC™) Wellhead The SSMC Wellhead is a total system designed to accommodate a variety of standard casing programs and working pressures, while using a minimum number of interchangeable components.

MBS Multi-Bowl Wellhead System The Cameron MBS Multi-Bowl Wellhead System is a compact, multi-bowl wellhead which can be used as an alternative to conventional wellhead systems in platform applications.

Sizes: Working Pressures: Temperature Range: Side Outlets: Top Connection: Annulus Seals: Tubing Hangers: Tubing Hanger Neck Seal:

Sizes: Working Pressures: Temperature Range: Casing Connections:

7-1/16” through 20-3/4” Up to 10,000 psi -20°F to +250°F (-29°C to +121°C) Line pipe threaded, studded FastLock or FlangeLock LS or metal-end-cap (MEC) Interchangeable single, dual and tensioned Straight radial lip (SRL)

11” through 13-5/8” 10,000 psi -20°F to +250°F (-29°C to +121°C) Casing box thread, slip-on weld with O-ring, CAMFORGE, SlipLock Line pipe threaded, studded Two sets of Type N Flanged Mandrel Energized with plastic packing or lockscrew Mandrel Elastomer/Metal

Metal Seal Split Compact Wellhead The Metal Seal Split Compact Wellhead is a metal sealing compact wellhead which features a split design.

Side Outlets: Lock Screws: Top Connection: Casing Hangers: Annulus Seals: Tubing Hangers: Tubing Hanger Neck Seal:

Sizes: Working Pressures: Temperature Range: Side Outlets: Top Connection: Annulus Seals: Tubing Hangers: Tubing Hanger Neck Seal:

Wellhead Seals Cameron wellheads offer a selection in sealing technology which increases versatility and ensures that the wellhead is adaptable for any production environment. Available seals include metal-to-metal seals in primary sealing applications and either LS elastomer seals of the Cameron-exclusive Metal End-Cap (MEC) seal in the annulus. All elastomer seals are available in premium elastomer materials developed by Cameron Elastomer Technology specifically for oilfield applications.

11” through 20-3/4” Up to 15,000 psi -20°F to +350°F (-29°C to +177°C) Line pipe threaded, studded FastLock or FlangeLock JS Interchangeable single, dual Straight radial lip (SRL)

SD016777

SD016743

SSMC Compact Wellhead

Metal Seal Split Compact Wellhead


SD016742

MBS Multi-Bowl Wellhead

155

156


Conductor Sharing, SpoolTree and Adjustable Wellheads

Conductor Sharing Wellhead (CSW ™ ) The Cameron CSW system provides compact wellhead technology for drilling two or more wells through one conductor. Sizes: Working Pressures: Temperature Range: Side Outlets: Top Connection: Annulus Seals: Tubing Hangers: Tubing Hanger Neck Seal:

Adjustable Wellhead System The Cameron Adjustable Wellhead System is designed for deepwater completions such as TLPs, SPARs and DDCVs where casing will be suspended at the mudline. Systems are available for both single and dual protective casing risers. All systems are designed with fire-resistant sealing and connection technology for maximum safety.

9” through 20-3/4” Up to 10,000 psi -20°F to +250°F (-29°C to +121°C) Line pipe threaded, studded Flanged, JB threaded LS or metal-end-cap (MEC) Interchangeable single, dual or tensioned S or straight radial lip (SRL)

Sizes: Working Pressures: Temperature Range:

SpoolTree™ Wellhead System The Cameron SpoolTree Wellhead System incorporates a unique design that allows maximum production flexibility while reducing costs and improving safety. Workover operations are optimized with minimal equipment handling. Sizes: Working Pressures: Temperature Range: Side Outlets: Secondary Seals: Top Connection: Annulus Seals: Tubing Hangers:

7-1/16” through 20-3/4” Up to 10,000 psi - 20°F to +250°F (-29°C to + 121°C) Line pipe threaded, studded Single P, Single T, Double T, NX Bushing, Double P Flanged, FastLock, FlangeLock LS or metal-end-cap (MEC) Single spool type

SD016746

CSW Wellhead

Secondary Seals: Top Connection: Bottom Connection:

11” and 13-5/8” Up to 15,000 psi - 20°F to +350°F (-29°C to + 177°C) with API 6FA, 6FB and 6FC capability Metal end-cap (MEC) or metal-to-metal FastLock Buttweld, CAMFORGE or SlipLock

SD016734

SpoolTree Wellhead

SD24874

Adjustable Wellhead System



157

Wellhead Connection Systems

Cameron offers several connection systems which feature reduced make-up time and increased safety. The CAMFORGE and SlipLock systems are used primarily to attach wellhead housings to surface casing. The FastLock, FlangeLock and FastClamp connections are fast make-up connectors used as end connections for wellhead spools, housings and BOPs.

FastLock™ Connector The FastLock Connector is designed to replace flanged connections for wellheads and reduce make-up time.

CAMFORGE™ Connection System The CAMFORGE Connection System incorporates a weldless bottom connection that makes installation fast, safe and economical. Production losses created by shutting in adjacent wells due to welding are eliminated. Problems associated with welding are avoided because the CAMFORGE connection is made using hydraulic pressure to expand the surface casing and housing.

Replaces standard flanged connection Fits reduced diameter proprietary hubs and standard API hubs Gasket Type: CF, BX, RX Working Pressures: Up to 15,000 psi Trim: Fire-tested to API 6FB Part I and II and thermal cycled per API 6A Appendix F. Meets NACE and API specifications for H2S service.

Application: Compatibility: Seal Type: Sizes: Working Pressures:

FlangeLock™ Connector The FlangeLock Connector has been designed as an alternative to the production version of the FastLock Connector and can be bolted directly to the Fastlock connector hubs. This allows for a smaller overall completion connection while providing maximum flexibility for drilling and workover operations.

Surface conductor-to-casing head housing connection S and IC wellheads, compact wellheads Metal-to-metal Wide range of sizes Up to 10,000 psi

Application: Compatibility:

Application: Compatibility: Gasket Type: Working Pressures: Trim:

Alternative to production FastLock connector Bolts directly to FastLock hub CF Up to 6500 psi Fire-tested to API 6FB Part I and II and thermal cycled per API 6A Appendix F. Meets NACE and API specifications for H2S service.

FastClamp™ Connector The FastClamp Connector was developed as an alternative to the conventional clamp assemblies and fits standard clamp hub profiles using conventional API ring gaskets. The connector features reduced make-up torque, faster make-up times and improved safety over conventional clamps. Application: Compatibility: Gasket Type: Working Pressures: SD016801

SD016801

CAMFORGE Wellhead Housing

Replaces standard clamp connections Fits all standard clamp hub profiles Conventional API ring gaskets Up to 15,000 psi

SlipLock Wellhead Housing

SlipLock™ Connection System The SlipLock Connection System uses a simple slip-type mechanism to replace conventional casing threads or slip-on preparations which require field welding. Application: Compatibility: Seal Type: Sizes: Working Pressures:

Surface conductor-to-casing head housing connection S and IC conventional wellheads, compact wellheads Elastomer (P seal) or metal-to-metal (CANH™ seal) Wide range of sizes Up to 10,000 psi

SD016260

SD016220

SD016259

FastLock Connector


FlangeLock Connector

FastClamp Connector

ecat section pages

1/13/00

5:52 PM

Page 4


API Gate Valves and Actuators

Table of Contents

API Gate Valves

Saf-T-Gard™ Actuators

Slab-Style Gates . . . . . . . . . . . . . . . . . . . . . . . .158

Actuator Bonnet Assemblies . . . . . . . . . . . . . .160

Expanding Gates . . . . . . . . . . . . . . . . . . . . . . .158

Pneumatic Saf-T-Gard™ Actuators . . . . . . . . . .160

Gate Valve Applications Chart . . . . . . . . . . . .158

Hydraulic Saf-T-Gard™ Actuators . . . . . . . . . . .160

FL Gate Valves . . . . . . . . . . . . . . . . . . . . .158-159

Wireline Cutting Actuators . . . . . . . . . . . . . . .160

FLS Gate Valves . . . . . . . . . . . . . . . . . . . . .158-159 FLS-R Gate Valves . . . . . . . . . . . . . . . . . . .158-159 M Gate Valves . . . . . . . . . . . . . . . . . . . . .158-159 M215 Gate Valves . . . . . . . . . . . . . . . . . . .158-159

Surface Safety Systems Panel-Based Surface Safety System . . . . . . . . .161 Self-Contained Surface Safety System . . . . . . .161 Pilot-Based Surface Safety System . . . . . . . . . .161


158


API Gate Valves

Cameron offers a complete family of gate valves for surface and subsea applications. Selection for a specific application depends on a number of factors.

Slab-Style Gates Cameron slab-style gates are one-piece, solid gates which consistently deliver outstanding sealing performance throughout a wide range of conditions, bore sizes and working pressure, including corrosive and abrasive fluid environments. Slab-style gates are used in the Cameron FL, FLS and FLS-R forged gate valves for both manual and actuated applications. These valves meet or exceed the requirements of API Specifications 6A, 6A SSV/USV and 17D. The slab-style gate effects a metal-to-metal seal on the flow stream. Its simple, straightforward design makes it easy to maintain and ideal for low and high pressure sealing where particulate matter could pose a sediment problem. Slab gates may also be used where wireline cutting is required. Expanding-Style Gates Recognized worldwide as the Pow-R-Seal® gate design, expanding-style gates are used in the Cameron M and M215 cast body gate valves. This popular gate design is used in manual valves to produce a high seating force against both the upstream and downstream seats simultaneously as the handwheel is tightened. This force effects a tight mechanical seal which is unaffected by line pressure fluctuations or vibration. The expanding gate allows a positive mechanical seal across both seats upstream and downstream, with or without pressure. The gate assembly uses an angular gate face which is collapsed during travel. When closed, a stop causes further downward travel to force the faces of the gate outward to effect a positive line flow seal. When opened, a stop causes further upward travel to force bottom faces to expand and seal against the seats to isolate flow from the valve body cavity.

Cameron Gate Valve Applications Slab

Expanding

Surface

Environment

•

•

Subsea

•

Characteristics Forged Body

Slab

Cast Body

•

Manual

•

Actuated

•

Clad

•

Fire Resistant

•

Wireline Cutting

•

Backseat Capability

•

Re-energizable Stem Packing

Expanding

•

•

•

FL Gate Valves Cameron FL Gate Valves have earned a reputation in all types of applications. They are full-bore, through-conduit valves with forged bodies and slab gates. FL valves feature a single spring-loaded, pressure-energized, non-elastomeric lip seal. This seal assists in low pressure sealing and protects against contaminants. Sizes: Working Pressure: Operating Temperatures: Materials: Industry Standard: Options:

2-1/16” through 4-1/16” 2000 through 5000 psi -75°F to +350°F (-59°C to +177°C) Variety of trims available API 6A, 17D Cameron Saf-T-Gard actuators

FLS Gate Valves Cameron FLS Gate Valves have earned a reputation in all types of applications. They are full-bore, through-conduit valves with forged bodies and slab gates. FLS valves feature dual spring-loaded, pressure-energized, non-elastomeric lip seals. These seals assist in low pressure sealing and protect against contaminants. Sizes: Working Pressure: Operating Temperatures: Materials: Industry Standard: Options:

1-13/16” through 9” 2000 through 20,000 psi -75°F to +350°F (-59°C to +177°C) Variety of trims available API 6A, 17D Cameron Saf-T-Gard actuators

FLS-R Gate Valves Cameron FLS-R Gate Valves were designed for use as manuals valve in high-pressure, large bore applications. These valves incorporate a lower balancing stem and a unique ball screw mechanism for ease of operation in the field. The FLS-R is value-engineered for reliability, low torque, ease of operation and service. The FLS-R has many of the same features as the FLS, including the gate and seat design and the pressure-energized lip seal technology. Sizes: Working Pressure: Operating Temperatures: Materials: Industry Standard:

4-1/16” through 9” 5000 through 15,000 psi -75°F to +350°F (-59°C to +177°C) Variety of trims available API 6A, 17D

M Gate Valves Cameron M Gate Valves are through-conduit gate valves featuring W-K-M’s exclusive Pow-R-Seal gate design which creates a positive mechanical seal across the seats, with or without line pressure. Sizes: Working Pressure: Operating Temperatures: Materials: Industry Standard:

2-1/16” through 4-1/16” 2000 through 5000 psi -75°F to +350°F (-59°C to +177°C) Variety of trims available API 6A

M215 Gate Valves Cameron M215 Gate Valves, with expanding Pow-R-Seal gate design, pressure-balanced stem, and metal-to-metal sealing provide safe, dependable service in 10,000 psi WP applications. The Pow-R-Seal gate design creates a positive mechanical seal across the seats, with or without line pressure. Sizes: Working Pressure: Operating Temperatures: End Connections: Materials: Industry Standard:

1-13/16” through 3-1/16” 10,000 psi -75°F to +350°F (-59°C to +177°C) Threaded, flanged Variety of trims available API 6A



159

API Gate Valves

SD24149

SD24149

SD24151

FLS Gate Valve

FL Gate Valve

FLS-R Gate Valve

FLS Seal FLS Gate Valves incorporate dual spring-loaded lip seals.

FL Seal FL Gate Valves incorporate a single spring-loaded lip seal.

SD24152

M Gate Valve


FLS-R Seal FLS-R Gate Valves incorporate dual spring-loaded lip seals.

SD24153

M215 Gate Valve

160


Saf-T-Gard™ Actuators

Cameron designs and manufactures a full range of Saf-T-Gard pneumatic piston and diaphragm actuators, hydraulic and wireline cutting actuators. These actuators can be used on the full line of Cameron gate valves in wellhead and pipeline applications. Cameron actuators are designed to be interchangeable and offer a wide range of flexibility.

Actuator Bonnet Assemblies Actuator bonnet assemblies on Cameron FL, FLS and M gate valves provide the interface between the gate valve and actuator. These bonnet assemblies are compatible with Cameron hydraulic and pneumatic actuators. They can also be used on other manufacturers’ direct-acting and reverse-acting gate valves. The bonnet assembly isolates all of the well bore fluids in the valve body from the actuator. Fieldproven performance, combined with innovative technology, allows Cameron actuator bonnets to match specific gate valves metallurgical and elastomeric requirements to extend wear life.

SD016724

MP Series Pneumatic Piston Actuator

Pneumatic Saf-T-Gard Actuators Cameron pneumatic Saf-T-Gard actuators are available in piston and diaphragm designs. The MP pneumatic piston actuators are interchangeable and operate with many types of supply: gas, compressed air, nitrogen, or well gas. These actuators are designed to meet a wide range of service requirements and are available in single and dual piston versions in a variety of sizes and pressure ranges. The MA pneumatic diaphragm actuators’ simple design and operating principle make it inherently trouble-free. This series is available in a variety of actuator diameters and configurations to meet a variety of service requirements. Hydraulic Saf-T-Gard Actuators Cameron hydraulic Saf-T-Gard MH series of actuators offers an intrinsically safe design that can be used in

hazardous areas. All Cameron hydraulic actuators are interchangeable with standard bonnet adapters. The MH series is available in single and dual piston models and in rising and non-rising stem configurations. These actuators offer an innovative, featurerich design that offers the power required to operate safely and reliably.

Wireline Cutting Actuators Cameron offers two models of hydraulic wireline cutting actuators: the MSVW and the MHW. The MSVW is an actuator for a surface safety valve. It is modular and features interchangeable spring and wireline cutting modules for easy conversion from wirecutting to non-wirecutting applications. The MHW is a wireline cutting version of the MH series piston hydraulic actuator. It is a single piston design which minimizes the amount of fluid required to compress the large power spring.

SD016719

SD016722

MA Series Pneumatic Diaphragm Actuator

MH 70 Series Hydraulic Actuator

SD24875

MHW Series Wireline Cutting Actuator

SD017082

FLS Gate Valve with FLS Bonnet


p9

12/17/1999

2:58 PM

Page 1


161

Surface Safety Systems

Cameron Saf-T-Gard actuators are part of a complete line of equipment for surface safety systems. Cameron safety control systems are designed to shut in a flow line in the event of abnormal condition, malfunction or operating irregularity. These systems have the most reliable surface safety shutdown system security available to operators for the protection of energy resources, property and the environment.

Systems are available to operate single or multiwell installations and units may be operated by compressed air, gas or electricity. Solar panels or wind generators are also available as alternative power supplies. Cameron safety shutdown systems are available in a number of configurations including panel-based, self-contained and pilot-based systems. Components on Cameron shutdown systems include precisionengineered pilot valves, pressure sensors, inline test

valves, dump valves, quick bleeds, probes, emergency shutdown valves, and pressure regulators. Systems include high and low pressure sensing monitors which ensure high calibration accuracy, continuous monitoring of shutdown set points and accurate shutdown set point changes. In addition, these systems help reduce maintenance time and costs because enclosures meet the requirement for operation in hazardous locations without the need to purge boxes.

Fusible Plug Fusible Plug

Fusible Plug Supply Line

Pressure to Fusible Plugs Hydraulic Pressure to Wing

Control Panel

Quick Exhaust Return Line Hydraulic Pressure to Master Sense Line Sand Probe Monitor Line

In

Se

rvic

e

Ou t

of

Hydraulic Pressure to SCSSV

D

ES

Se

rvic

SD16739

FL

OW

e

Riser

Flow Line

Emergency Shut-Down Station Surface Controlled Subsurface Safety Valve

Scrubber & Pressure Regulator SD24345

Panel-Based Surface Safety System

Self-Contained Surface Safety System

High Pressure Regulator

Actuator Supply Source

SD017002

Low Pressure Regulator

MA16

Pilot-Based Surface Safety System


ecat section pages

1/13/00

5:52 PM

Page 5


Cameron Willis Chokes

Table of Contents

Control Chokes Plug and Cage Control Chokes . . . . . . . . . . . .162 External Sleeve Control Chokes . . . . . . . . . . .162 Needle and Seat Chokes H2 Classic Needle and Seat Chokes . . . . . . . . .162 H2I Needle and Seat Chokes . . . . . . . . . . . . . .162

Subsea Chokes Non-Retrievable Subsea Chokes . . . . . . . . . . .163 Retrievable Subsea Chokes . . . . . . . . . . . . . . .163 Choke Actuators SLCA Actuator . . . . . . . . . . . . . . . . . . . . . . . . .163 Aqua-Torq™ Subsea Actuator . . . . . . . . . . . . .163

MOV Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163


162


Cameron Willis Control Chokes and Needle and Seat Chokes

Cameron Willis is a separately managed unit within the Cameron organization focused on the worldwide supply of Cameron and Willis brand chokes and actuators. The Cameron Willis choke product line offers chokes for drilling and production applications both subsea and surface. Chokes are available in a wide range of trim and body materials with a full range of accessories, including actuators. Cameron Willis choke products include control chokes (Plug and Cage and External Sleeve), needle and seat (positive and adjustable), MOVs, subsea chokes, drilling chokes and choke actuators. Cameron Willis can provide operators with a computer sizing and selection program to determine the right product for the application.

Plug and Cage Control Chokes The Plug and Cage Control Choke has a plug that throttles the flow on the inside diameter of a ported cage. Applications: Operating Environment: Service: Models Available: Working Pressure: Operating Temperatures: Materials: Trims: Actuation:

Wellhead, manifold, separator, let-down, waterflood, CO2, EOR, gas lift, subsea, injection Platform, land-based and subsea High flow capacity, moderate erosion CC15, CC20, CC30, CC40, CC60 5000 and 10,000 psi API ratings K, L, P, R, S, T, U, X -75°F to +350°F (-59°C to +177°C) API ratings AA, BB, CC, DD, EE, FF, HH Variety of materials and configurations SLCA, Aqua-Torq

External Sleeve Control Chokes The External Sleeve Control Choke has a sleeve that throttles the flow on the outside diameter of the ported cage. Applications: Operating Environment: Service: Models Available: Working Pressure: Operating Temperatures:

Wellhead production and injection Platform, land-based and subsea High erosive and high pressure drop CC20, CC30, CC40 5000, 10,000 and 15,000 psi API ratings K, L, P, R, S, T, U, X, - 75°F to +350°F (-59°C to +177°C)

Comparison of Cameron Willis Production Choke Characteristics Application Environment Surface Subsea Characteristics Needle and Seat Positive Adjustable Multiple Orifice Valve Plug and Cage External Sleeve Manual Actuated

Materials: Trims: Actuation:

H2

H2I

•

•

• • •

• • •

•

•

Cameron Willis Choke Model CC15 CC20 CC30 CC40 CC60 MC-10 MC-20 • •

• •

• •

• •

• •

•

•

•

•

•

•

•

• •

• •

• • • •

• • • •

• • • •

• • • •

• • •

• •

• •

API ratings AA, BB, CC, DD, EE, FF, HH Tungsten carbide cage and sleeve SLCA, Aqua-Torq or user preference

H2 Classic and H2I Needle and Seat Chokes The H2 Classic Choke has an externally threaded body and is the standard for needle and seat chokes. The Cameron H2I Choke has a recessed bean/seat design and an externally threaded bonnet cap to ease maintenance. Nominal Sizes: H2 Classic: 2”, 3”, 4”, H2I: 2”, Needle/Maximum Orifice Size: H2 Classic: 1”, 2”, 3”, H2I: 1”, 2” Working Pressure: 2000 through 15,000 psi Operating Temperatures: API ratings K, L, P, R, S, T, U, X -75°F to +350°F (-59°C to +177°C) Materials: API ratings AA, BB, CC, DD, EE, FF, HH Needle and Seat Trims: Standard: Induction hardened stainless steel Super: Stainless steel with tungsten carbide wear surfaces Performance Verification: API 6A, including performance verification testing for PR2 level chokes.

SD9506

H2I Adjustable Choke

SD016246

Plug and Cage Control Choke

SD9511

H2 Classic Positive Choke (Shown without Bean)

SD11393

External Sleeve Control Choke



163

Cameron Willis MOVs, Subsea Chokes and Choke Actuators

Multiple Orifice Valves (MOVs) The Cameron Willis MOV uses two matched discs, each with a pair of circular openings to create variable flow areas as one disc is rotated relative to the other. Applications: Sizes: Working Pressure: Operating Temperatures: Materials: Trims: Actuation:

Wellhead, manifold, separator, let-down, waterflood, CO2, EOR, gas lift, subsea MC-10: 1” - 2-1/16”, MC-20: 2” - 4-1/16” MC-10: to 3000 psi, MC-20: to 5000 psi -50°F to +250°F (-46°C to +121°C) API ratings AA, BB, CC, DD, EE, FF, HH Complete range of materials and trims Manual or actuated

SD11593

Manual MC-10 MOV

SD11592

MC-10 MOV with Electric Actuator

Cameron Willis Non-Retrievable Subsea Chokes Cameron Willis subsea chokes are used in production, water injection, gas injection and gas lift applications. Non-retrievable designs are available with plug and cage or external sleeve trim and are used primarily in shallow water or as part of a retrievable manifold/module assembly. Nominal Sizes: Water Depth Rating: Working Pressure: Operating Temperatures: Materials: Performance Verification: Actuation:

2”, 3”, 4”, 6” To 10,000 feet (3048 meters) To 15,000 psi To 400°F (204°C) API ratings AA, BB, CC, DD, EE, FF, HH API 6A Appendix F, API 17D SLCA

Cameron Willis Retrievable Subsea Chokes Cameron Willis retrievable subsea chokes are designed with a retrievable insert and a fixed body. Retrievable chokes are available with two types of insert connectors: Crown Connector and Clamp Connector. Retrievable designs are available with plug and cage or external sleeve trim. Nominal Sizes: Water Depth Rating: Working Pressure: Operating Temperatures: Materials: Performance Verification: Actuation:

2”, 3”, 4” To 10,000 feet (3048 meters) To 15,000 psi To 400°F (204°C) API ratings AA, BB, CC, DD, EE, FF, HH API 6A Appendix F, API 17D Aqua-Torq

SD24888

Subsea Retrievable Choke with Clamp Connector

SD24408

Subsea Retrievable Choke with Crown Connector

SLCA Actuator The SLCA Actuator is offered in both surface and subsea designs. It provides precise incremental steps from open to closed. Water Depth Rating: To 10,000 feet (3048 meters) Pneumatic Operating Pressure: 100 psi, (80 psi min - 150 psi max), 110 ft/lb at 100 psi Hydraulic Operating Pressure: 1500 psi, (3000, 5000 psi maximum) Operating Temperatures: Surface : -20°F to +150°F (-29°C to 66 °C) Subsea: 0°F to +150°F (-18°C to 66°C) Performance Verification: API 6A PR2, API 17D

SD11705

SLCA Surface Actuator

Aqua-Torq™ Subsea Actuator The Aqua-Torq Actuator is a compact and field-proven design. It provides precise incremental steps from open to closed. Water Depth Rating: Hydraulic Operating Pressure: Operating Temperatures: Performance Verification:

To 10,000 feet (3048 meters) 1500 psi, 3000 psi (5000 psi maximum) 0°F to +150°F (-18°C to 66°C) API 6A PR2, API 17D SD24405

Aqua-Torq Subsea Actuator (Cutaway View) © CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

ecat section pages

1/13/00

5:52 PM

Page 6


Cameron Controls

Table of Contents

Drilling Control Systems Land and Platform Hydraulic BOP Control Systems . . . . . . . . . . . . . . . . .164 Subsea Hydraulic BOP Control Systems . . . . . .164 Subsea Multiplex (MUX) Electro Hydraulic BOP Control Systems . . . . . . . . . . . . . . . . .164

Workover/Installation Control Systems . . . . . . . .164 Production Control Systems CAMTROL™ Advanced Multiplexed Subsea Production Control System . . . . . . . . . . . . . . .165


164


Cameron Controls Drilling and Workover Control Systems

Cameron Controls is an independently managed organization within Cameron dedicated to the design and manufacture of control systems for drilling, workover and production applications.

Drilling Control Systems As the world’s leading supplier of BOPs, Cameron is uniquely qualified to design, manufacture, install and service drilling control systems tailored to the specific requirements of Cameron BOPs. By providing superior design, dependable performance and excellent field service, Cameron Controls has become the worldwide industry leader in the supply of state-ofthe-art drilling control systems for land, platform and subsea applications.

Cameron Controls provides land and platform hydraulic BOP control systems, subsea hydraulic BOP control systems and subsea multiplex (MUX) electrohydraulic BOP control systems. The Cameron MUX control system combines the reliability of the Cameron subsea hydraulic control system with electronic technology to provide the rapid actuation required by subsea BOPs operating in deepwater. The Cameron MUX control pod is the lightest weight, most compact pod in the industry. It provides reliable operation of all BOP stack functions and is intended to be fully retrievable. It utilizes Cameron’s highly regarded shear seal control valves to provide maximum flexibility and precise control.

Workover /Installation Control Systems Subsea completions require a control system which is capable of controlling functions during installation or workover operations when the production control system is disabled. This control system operates the running tool functions during installation of tubing hangers, tubing spools and subsea Christmas trees. It also controls the tree and downhole safety valves during workover operations. Cameron Controls provides workover/installation control systems using simple direct hydraulic control as well as complex multiplex electro-hydraulic systems. The multiplex systems are required for subsea production in deepwater to provide rapid actuation of subsea systems.

SD11598 SD24401

Complete Cameron Workover/Installation Control System

Land BOP Control Unit

SD24959

Auxiliary MUX Touch Screen Drilling Control Panel

SD24382

SD24960

Drilling Diverter Control Panel with Integrated Hydraulic Control Unit

MUX Drilling Control Panel

SD24373

Multiplex (MUX) Drilling Control Pod



165

Cameron Controls Production Control Systems

Production Control Systems The CAMTROL™ Advanced Multiplexed Subsea Production Control System is part of the MOSAIC (Modular Subsea and Integrated Completions) product line and offers a modular approach to controlling subsea systems. This system is smaller, lighter, more dependable, easier to install and incorporates more functionality than any system on the market today. A systemic approach enables the CAMTROL system to operate and monitor an entire field development and to be adaptable from field development to field development, eliminating the need for custom-designed systems every time field parameters change. The system is applicable to many field conditions and can easily be adapted for use in deepwater or shallow water; with trees or manifolds; or with virtually any production scenario. The CAMTROL system uses common intervention methods for the installation and retrieval of the subsea control module, retrievable subsea chokes, accumulator modules and compact, multi-phase flow meters. Methods may include diver-assist, diverless, guideline, guidelineless, ROV-assisted and totally autonomous. The CAMTROL subsea control module (SCM) is small, compact and lightweight. It provides multiplexed electro-hydraulic monitoring and controls of up to 32 hydraulic functions including the traditional tree functions, manifold valve control, choke adjustment, position indication/feedback, header pressure/temperature monitoring, downhole monitoring, and pressure drops across chokes.

SD24602

CAMTROL Multi-Mode Running Tool

SD24406 SD24890

Direct Hydraulic Subsea Production Control Panel


CAMTROL Subsea Production Electro-Hydraulic Control Module

ecat section pages

1/13/00

5:52 PM

Page 7


Cooper Cameron Valves

Table of Contents

Overview and Valve Applications Chart . . . . . . . .166

310 C Ball Valves . . . . . . . . . . . . . . . . . . . . . . .169

Orbit Valves Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 TruSeal Plug Valves

W-K-M DynaSeal® Ball Valves

. . . . . . . . . . . . . . . . . . . .167

TriAx Rotary Process Valves

. . . . . . . . . . . . . .167

Cameron Welded Body Ball Valves . . . . . . . . . . . .167 W-K-M and Foster Gate Valves W-K-M Saf-T-Seal® Gate Valves . . . . . . . . . . . .168 W-K-M Pow-R-Seal® Gate Valves . . . . . . . . . . .168 Foster D-Seal Gate Valves . . . . . . . . . . . . . . . .168 Demco Gate Valves

310 D Ball Valves . . . . . . . . . . . . . . . . . . . . . . .169 370 CT Ball Valves . . . . . . . . . . . . . . . . . . . . . .169 370 E4 Ball Valves . . . . . . . . . . . . . . . . . . . . . .169 370 D4 Ball Valves . . . . . . . . . . . . . . . . . . . . . .169 W-K-M DynaCentric™ Butterfly Valves . . . . . . . . .169 Demco Butterfly Valves . . . . . . . . . . . . . . . . . . . . .169 Thornhill Craver Chokes Positive Chokes . . . . . . . . . . . . . . . . . . . . . . . .169 Adjustable Chokes . . . . . . . . . . . . . . . . . . . . . .169

DM Gate Valves (API & ANSI) . . . . . . . . . . . . .168 DT Gate Valves . . . . . . . . . . . . . . . . . . . . . . . .168 DB Gate Valves . . . . . . . . . . . . . . . . . . . . . . . .168


166


Cooper Cameron Valves

Cooper Cameron Valves is an independent operating unit within the Cameron Division of Cooper Cameron Corporation. Cooper Cameron Valves serves the needs of the petroleum and process industries with a full range of ANSI and API 6D class valves, chokes, actuators and accessories. Cooper Cameron Valves offers some of the world’s most prestigious brand names: Cameron, W-K-M, Foster, Orbit, Demco, Thornhill Craver. Each has earned a reputation for quality and dependability through years of service. • Orbit Valves, TruSeal Valves and TriAx Valves are highly regarded products, each with a field-proven, yet unique sealing principle. The Orbit block technology provides valves with unmatched safety and long-term performance. • Cameron Welded-Body Ball Valves are renowned worldwide for dependable pipeline service. They combine the strength of forged steel components with a compact, spherical design. • Foster and W-K-M Gate Valves are built to provide durable, bubble-tight

seals under a range of demanding pipeline, processing, steam and storage applications. • DynaSeal ball valves bearing the W-K-M brand are the accepted standard in oil and gas production lines, gathering systems and gas processing applications. • Bi-directional W-K-M DynaCentric Butterfly Valves are high performance butterfly valves for demanding applications. • Resilient seated Demco butterfly valves provide long, trouble-free service in lines up to 48” in diameter. • Rugged Thornhill Craver Chokes provide reliable control in both positive and adjustable configurations. All of these products are backed by a worldwide sales and service network. Cooper Cameron Valves technical experts can evaluate any project, determine the appropriate equipment needed and make recommendations.

Cooper Cameron Valves Applications Chart Cooper Cameron Valves Products Applications

Orbit Valves

Orbit TruSeal Plug Valves

Orbit TriAx Process Valves

Cameron All-Welded Ball Valves

•

•

W-K-M Pow-R-Seal Gate Valves

W-K-M Foster Saf-T-Seal D-Seal Gate Valves Gate Valves

Demco Gate Valves

W-K-M DynaSeal Floating Ball Valves

W-K-M DynaSeal Trunnion Ball Valves

•

•

•

•

•

•

•

W-K-M DynaCentric Butterfly Valves

Demco Butterfly Valves

Thornhill Craver Chokes

•

•

Transmission Offshore

•

Mainline

•

Compressor Stations

•

Meter/Regulating

•

Launchers/Receiver

•

• •

•

•

•

•

•

•

•

• •

•

•

•

Production Flow Lines

•

Manifolds/Heaters

•

•

•

•

•

•

•

•

•

EOR/Waterflood

•

•

•

•

•

•

Firewater Systems Tank Batteries

• •

•

Mud Tanks/Systems

•

•

• •

Swab Valves

• •

•

•

Field Compression

•

•

•

•

•

Gas /Oil Gathering

•

•

•

•

•

Gas/Oil Separation

•

•

•

•

•

•

•

•

•

•

Oil Production

•

•

•

•

•

• •

•

•

•

Gas Storage

•

•

Gas Metering

•

•

•

•

•

•

Gas Measurement

•

•

•

•

•

•

•

•

•

•

•

Drilling Refining

•

•

• •

•

•

•

• •

•

•

•

•

•

•

•

•

•

•

Industrial Chemical

•

•

•

•

•

•

•

•

•

•

•

Petrochemical

•

•

•

•

•

•

•

•

•

•

•

Pulp and Paper

•

•

•

•

•

•

•

•

•

•

Marine

•

Power Generation

•

•

Food and Beverage

•

•

Mining

•

Fuel System

•

Gas Distribution

•

Water and Sewage

• •

•

•

•

•

• •

• •

•

• •

•

•

•

•

Material Handling

•

• •

•

Construction Iron and Steel

• •

• •

•

• • •



167

Orbit Ball Valves, TruSeal ® Valves, TriAx ™ Valves, Cameron Ball Valves

Orbit Valves Orbit Ball Valves are top-entry, rising stem, trunnion-mounted block valves. These valves feature a unique mechanical wedge closure and tilt-and-turn operation which eliminates seal rubbing. Sizes: Pressure Classes: Operating Temperatures: End Connections: Materials: Options:

1” through 24” 150, 300, 600, 900, 1500, 2500 -20°F to +800°F (-29°C to +427°C) Flanged, weld, weld-by-flange Carbon steel, stainless steel Variety of trims available Pneumatic, hydraulic or electric actuators

Orbit TruSeal Plug Valves TruSeal Valves are double-block-and-bleed plug valves used for segregation of liquids and gasses. Sizes: Pressure Classes: Operating Temperatures: End Connections: Materials: Options:

3” through 36” 150, 300, 600 -50°F to +350°F (-46°C to +177°C) Flanged Carbon steel, stainless steel Variety of trims available Electric and pneumatic actuators

SD24926

SD24925

Orbit Ball Valve

Orbit TruSeal Plug Valve

Orbit TriAx Rotary Process Valves TriAx Rotary Process Valves feature an exclusive triple-axis offset sealing system which provides tight shut-off and high frequency operation with zero leakage. Sizes: Pressure Classes: Operating Temperatures: End Connections: Materials: Options:

3” through 24” 150 through 200 -20°F to +400°F (-29°C to +204°C) Flanged Carbon steel, stainless steel Variety of trims available Pneumatic, hydraulic or electric actuators

SD24927

Orbit TriAx Process Valve

Cameron Welded Body Ball Valves Cameron Welded Body Ball Valves feature a forged and welded body design which is compact and streamlined for maximum strength and minimum weight. Sizes: Pressure Classes: Operating Temperatures: End Connections: Body Styles: Materials: Options:

2” through 56” 150, 300, 400, 600, 900, 1500, 2500 -50°F to +350°F (-46°C to +177°C) Flanged, weld, weld-by-flange All welded Carbon steel, stainless steel, duplex Variety of trims available Gear, pneumatic, hydraulic, gas over oil and electric actuators; high head and right angle extensions

SD7669

Cameron Welded Body Ball Valve


168


W-K-M, Foster and Demco Gate Valves

W-K-M Saf-T-Seal ® Gate Valves W-K-M Saf-T-Seal Gate Valves are slab-style gate valves featuring a simple, reliable design. Sizes: Pressure Classes: Operating Temperatures: End Connections: Materials: Options:

2” through 48” 150, 300, 400, 600, 900, 1500, 2500 -20°F to +400°F (-29°C to +204°C) Flanged, weld, weld-by-flange Carbon steel, stainless steel Variety of trims available Pneumatic, hydraulic actuators

W-K-M Pow-R-Seal® Gate Valves W-K-M Pow-R-Seal Gate Valves feature W-K-M’s highly regarded Pow-R-Seal gate design. Sizes: Pressure Classes: Operating Temperatures: End Connections: Materials:

2” through 36” 300, 600, 900, 1500, 2500 Up to 1000°F (538°C) (Outside packing gland) Up to 550°F (288°C) (Inside packing gland) Flanged, weld, weld-by-flange Carbon steel, stainless steel

SD106244

SD106245

W-K-M Pow-R-Seal Gate Valve

W-K-M Saf-T-Seal Gate Valve

Foster D-Seal™ Gate Valves Foster D-Seal Gate Valves are slab-style gate valves featuring the unique D-seal technology. Sizes: Pressure Classes: Operating Temperatures: End Connections: Materials: Options:

2” through 40” 150, 300, 400, 900, 1500 -20°F to +400°F (-29°C to +204°C) Flanged, weld, weld-by-flange A wide variety of materials is available for standard, MTBE and geothermal applications Power actuators SD016656

Foster D-Seal Gate Valve

Demco DM, DB and DT Gate Valves DT and DB valves are made for waterflood and CO2 applications. The DB is available in larger sizes for the EOR market. The DM is specifically engineered for oilfield applications and is available in API and ANSI versions. Operating temperatures for all three valves range from -20°F to +300°F (-29°C to +149°C). DM Gate Valves Sizes: API Working Pressures: ANSI Pressure Classes: Body Materials: DT Gate Valves Sizes: Pressure Classes: Body Materials: DB Gate Valves Sizes: Pressure Classes: Body Materials:

API: 2” - 6” RP; ANSI: 1-1/2” - 8” RP 2000, 3000 and 5000 psi 400, 600, 900 and 1500 Alloy steel, stainless steel

SD11684

Demco Series DM (API) Gate Valve

SD11685

Demco Series DM (ANSI) Gate Valve

Flanged: 1” - 4”; Threaded: 1” - 3” Threaded 1”: 600, 900; 1500; 3”: 900 Flanged 1”: 900, 1500; 2” - 4”: 600, 900, 1500 Aluminum bronze, stainless steel available

6” - 8” RP 600, 900, 1500 Aluminum bronze

SD11682

Demco Series DT Gate Valve

SD11683

Demco Series DB Gate Valve



169

W-K-M DynaSeal ® Ball Valves, W-K-M and Demco Butterfly Valves, Thornhill Craver Chokes

W-K-M DynaSeal Ball Valves W-K-M DynaSeal Ball Valves are high quality ball valves which are available in a number of models. The 310C and 310D models are floating ball valves. Trunnion styles include the 370 CT, 370 E4 and 370 D4. The 370 CT and 370 D4 valves are two-piece, end-entry valves. 370 E4 valves are one-piece, top entry valves. 310 C and 310 D Ball Valves Sizes: Pressure Classes: Operating Temperatures: End Connections: Body Styles: Body Materials:

Full bore: 1/4” - 12”; Regular port: 1/2” - 14” To 5000 psi in small sizes, 740 psi in large sizes -20°F to +650°F (-29°C to +343°C) Flanged, threaded and weld ends 310C 2- and 3-piece; 310D Unibody and 2-piece Carbon steel and stainless steel

SD24097 SD10038

W-K-M DynaSeal 310 Ball Valve

W-K-M DynaSeal 370 CT Ball Valve

370 CT Ball Valves Sizes: Full bore: 2” - 12”; Regular port: 6” - 14” Pressure Classes: 150, 300 Operating Temperatures: -20°F to +250°F (-29°C to +121°C) End Connections: Flanged, weld, weld-by-flange Body Styles and Materials: Two-piece, carbon steel and stainless steel 370 E4 Ball Valves Sizes: Pressure Classes: Operating Temperatures: End Connections: Body Materials:

Full bore: 2” - 6”; Regular port: 3” - 8” 600 -20°F to +250°F (-29°C to +121°C) Flanged, weld, weld-by-flange Carbon steel and stainless steel

370 D4 Ball Valves Sizes: Pressure Classes: Operating Temperatures: End Connections: Body Materials:

Full bore: 2” - 12”; Regular port: 3” - 12” 150, 300, 600, 900, 1500 -50°F to +350°F (-46°C to +177°C) Flanged, weld, weld-by-flange Carbon steel and stainless steel

SD11348

SD9709

W-K-M DynaSeal 370 E4 Ball Valve

W-K-M DynaSeal 370 D4 8”-12” Class 600 Ball Valve

W-K-M DynaCentric™ Butterfly Valves W-K-M Butterfly Valves handle severe line stresses and high pressure service. Sizes and Pressure Classes: Class 150 and 300: 3” - 24”: Class 600: 3” - 12” Operating Temperatures: -50°F to +1000°F (-46°C to +538°C) Body Styles: Flangeless wafer, threaded lug Body Materials: Carbon steel and stainless steel

Demco Butterfly Valves Demco Butterfly Valves are resilient seated valves designed for many applications. Sizes: Working Pressures: Operating Temperatures: Body Styles: Body Materials:

Varies by series Wafer: 2”- 12”: to 200 psi; 14”- 48”: to 150 psi Lug: 2”- 12”: to 200 psi -20°F to +300°F (-29°C to +149°C) Flangeless wafer, threaded lug Cast and ductile iron, carbon and stainless steel, aluminum bronze

SD11356

W-K-M DynaCentric High Performance Valve

SD11157

Demco NE-C Butterfly Valve

Thornhill Craver Positive and Adjustable Chokes Thornhill Craver Chokes are available in positive and adjustable versions. Pressure Ratings: Seat Sizes: Bean Sizes: End Connections: Body Materials:

2000, 3000, 5000, 10,000, 15,000, 20,000 CWP 2000 CWP: 1/2”and 3/4”; 3- 10,000 CWP:1/2”-2”; 15,000, 20,000 CWP: 1/2”and 3/4” 3000, 5000,10,000 CWP: 1/64” - 1” 2000, 15,000, 20,000 CWP: 1/64” - 3/4” Threaded, UNIBOLT, flanged API or ANSI Alloy steel, 12% chrome stainless steel, tungsten carbide


SD11698

Thornhill Craver Adjustable Choke

SD24325

Thornhill Craver Adjustable Chokes


Western Hemisphere Cameron PO Box 1212 Houston Texas 77251-1212 Tel 713 939 2211 Fax 713 939 2620 http://www.camerondiv.com

Eastern Hemisphere Cooper Cameron (U.K.) Ltd. 5 Mondial Way Harlington Hayes UB3 5AR Tel 44 208 990 1800 Fax 44 208 990 1888 http://www.camerondiv.com

Asia Pacific/Middle East Cooper Cameron (Singapore) Pte. Ltd. No. 2 Gul Circle, Jurong Industrial Est Locked Bag Service No. 3 Jurong Town Post Office Singapore 2262 Republic of Singapore Tel 65 861 3355 Fax 65 861 6197 http://www.camerondiv.com

Aqua-Torq, CAMFORGE, CAMLAST, CAMRAM, CAMRAM 350, CAMSERV, CAMTROL, CAMULAR, CAMWARE, CANH, CSW, DUROCAM, DynaCentric, FastClamp, FastLock, FlangeLock, FlexPacker, FlexPacker-NR, HydraQuad, LoadKing, MOSAIC, Saf-T-Gard, SlipLock, SpoolTree, SSMC, STC, STM, Thornhill Craver, TL BOP, U BOP, UM BOP and VBR-II are trademarks of the Cooper Camerron Corporation, Cameron Division. Cameron, Demco, D-Seal, DynaSeal, Foster, Orbit, Pow-R-Seal, Saf-T-Seal, TruSeal, Willis and W-K-M are registered trademarks of the Cooper Camerron Corporation, Cameron Division. © Cooper Cameron Corporation, Cameron Division

Printed in USA, 9/99, GP/10M, TC1394

TC1398 Brochure Links

2/2/00

4:34 PM

Page 3


Table Of Contents

A d d i t i o n a l C a m e ro n R e s o u rc e s Visit the Cameron website – www.camerondiv.com

Order Printed Brochures by Internet

View Brochures in Acrobat® .PDF Format

Order Printed Brochures by Fax

Cameron Brochures

Cameron Brochures

Cooper Cameron Valves Brochures

Cooper Cameron Valves Brochures


Table Of Contents

C a m e ro n O n l i n e B ro c h u re s General Literature TC1253 A Cameron Introduction to API Specifications TC1268 Cameron South Louisiana Facilities TC1281 Cameron Research Center TC1308 History of Cameron Aftermarket Facilities TC0996 Aberdeen Aftermarket Facility TC1098 Anchorage Aftermarket Facility TC1142 Cameron Aftermarket Network TC1001 Cameron BOP Replacement Parts Catalog TC0936 Stavanger Aftermarket Facility Services TC1153 Drilling Total Vendor Management Programs TC1128 Total Vendor Management TC1382 CAMSERV™ Drilling Aftermarket TC1001 Cameron BOP Replacement Parts Catalog TC1153 Total Vendor Management TC1382 CAMSERV™ Collet Connectors TC1244 Deepwater High Capacity (DWHC) Collet Connector TC1272 Collet Connector Comparison Drilling Controls TC1162 Cameron Controls Systems Drilling Riser Systems TC1378 Free-Standing Drilling Riser System TC1271 LoadKing™ Riser Connector Drilling Valves TC1201 Cameron API 6A Gate Valves TC0880 Cameron MCS Drilling Valve Cameron Elastomer Technology TC0787 The Cameron FLEXPACKER™ Ram TC1375 Ram and Packer Top Seal Applications (93-003) TC0983 Proper Storage Techniques of Elastomer Products (96-002) TC1317 Cameron Flexpacker-NR™ Ram Packer (98-001) TC1318 Cameron VBR-II™ Variable Bore Ram (98-002) TC1254 Cameron Inserted Packer for Snubbing/Stripping (99-002) TC0890 CAMULAR Field Evaluation Test Results (99-006) CAMRAM™ and CAMRAM™ 350 Elastomer Products TC0988 CAMRAM 350 Packers and Top Seals (92-006) TC0984 How to Identify CAMRAM Packers and Top Seals (94-002) TC0985 CAMRAM Packers and Top Seals, Field Test (94-003) TC0986 CAMRAM Packers and Top Seals, Field Test (94-004) TC0987 CAMRAM 350 Packers and Top Seals, Field Test (94-005) TC0989 CAMRAM Packers and Top Seals, Fatigue Test (94-007) TC0990 CAMRAM Packers and Top Seals, Stripping (94-008) TC0991 CAMRAM Packers and Top Seals, Comparative Stripping Test (94-009) TC1163 CAMRAM Dual Bore FlexPacker (96-001) TC1399 Improved Cameron DS SBRs (99-004) TC1400 Product Identification: CAMRAM/CAMRAM 350 (99-005)

Subsea MOSAIC™ Certified Components TC1247 MOSAIC (Modular Subsea and Integrated Completions) TC1266 Subsea Wellheads For Deep and Shallow Water TC1267 Modular Dual Bore Christmas Tree TC1276 CAMTROL™ Multiplex Production Control System TC1265 SpoolTree™ Subsea Production System Valves, Chokes and Actuators TC1201 Cameron API 6A Gate Valves TC1129 Willis Stepping Linear Control Actuator Collet Connectors TC1244 Deepwater High Capacity (DWHC) Collet Connector TC1272 Collet Connector Comparison Production Controls TC1162 Cameron Control Systems TC1276 CAMTROL™ Multiplex Production Control System Wellhead Systems TC1256 Cameron Mudline Suspension Systems TC1266 Subsea Wellheads For Deep and Shallow Water Pipeline and Flowline Tie-In Systems SD100149 Pipeline and Flowline Tie-In Systems Surface Chokes TC0255 Cameron H2 Family of Chokes TC0977 Willis Control Chokes TC0961 Willis In-Line Chokes Models MC10 & MC20 TC0807 Willis MOV Choke TC0789 Willis M1A Choke Valves and Actuators TC1201 Cameron API 6A Gate Valves TC1122 Cameron DTS Gate Valve TC1010 Cameron MS Check Valve TC0870 Pig Louncher and Receiver Valves TC1275 Saf-T-Gard™ Actuators for Surface Applications Wellhead Systems TC1261 Cameron Conventional Surface Wellheads TC1256 Cameron Mudline Suspension Systems TC1263 Cameron MBO Multi-Bowl Wellhead TC1262 Cameron MBS Multi-Bowl Wellhead TC1277 Cameron SSMC Wellhead System TC1387 Conductor Sharing Wellhead (CSW) System TC1255 Cameron Geothermal Wellhead Systems TC1396 CAMFORGE™ Wellhead System Miscellaneous TC1079 Cameron Tension Integral Tie-Back System TC0825 Cameron FASTLOCK™ Connector


Table Of Contents

Cooper Cameron Valves Online Brochures Ball Valves TC1191 Cameron Welded Body Ball Valves TC0806 W-K-M DynaSeal Trunnion Ball Valve Butterfly Valves TC0869 Demco Butterfly Valves for Food & Beverage Industry TC1024 Demco Butterfly Valves for Industrial Applications TC1045 Demco Butterfly Valves for Marine Industry TC0859 W-K-M DynaCentric High Performance Butterfly Valve WR2545 W-K-M Why a Butterfly Valve?

Gate Valves TC1106 Demco Aluminum Bronze and Stainless Steel Valves TC1224 Demco DM 7500 Gate Valve TC1058 Valves and Accessories for Emergency Shutdown Applications Chokes TC1048 Thornhill Craver Economy Heater Choke Miscellaneous TC0836 Demco/W-K-M Valves for Pulp & Paper Applications TC1046 Valves for Fuel Handling Systems TC1194 Valves for Industrial Process Applications TC1407 1999 - 2000 Sourcebook

General Literature Request Form Revision Date: 1/00 General Literature

Doc. #

Quantity

Cameron Controls

Doc. #

Quantity

A Cameron Introduction to API Specifications Cameron South Louisiana Facilities Cameron Research Center History of Cameron

TC1253 TC1268 TC1281 TC1308

_________ _________ _________ _________

CAMTROL™ Multiplex Production Control System

TC 1276

_________

Cameron Willis

Doc. #

Quantity

Catalogs

Doc. #

Quantity

2000 Cameron General Catalog

TC1394

_________

2000 Cameron General Catalog CD ROM

TC1398

_________

1998 -1999 Cameron General Catalog

TC1264

_________

1998 -1999 Cameron General Catalog CD ROM

TC1319

_________

Aftermarket

Doc. #

Willis Control Chokes Willis In-Line Chokes Models MC10 & MC20 Willis MOV Choke Willis M1A Choke Willis S-15000 Stepping Actuator Willis Pig Launcher and Receiver Valves Cameron H2 Family of Chokes Cameron Willis Saf-T-Gard™ Actuators

TC977 TC961 TC807 TC789 TC874 TC870 TC255 TC1275

_________ _________ _________ _________ _________ _________ _________ _________

CAMSERV Aberdeen Aftermarket Facility Anchorage Aftermarket Facility Stavanger Aftermarket Facility

TC1382 TC996 TC1098 TC936

Drilling

Doc. #

Quantity

Surface

Doc. #

Quantity

TC1001 TC1153

_________ _________

TC1261 TC1277 TC1387 TC1256 TC1263 TC1262 TC1255 TC1396

_________ _________

TC1271 TC1378

_________ _________

TC1244 TC1272 TC1201 TC1057 TC880

_________ _________ _________ _________ _________

TC1201 TC1275 TC1057 TC1122 TC1010

_________ _________ _________ _________ _________

TC007 TC129

_________ _________

TC1079 TC825

_________ _________

Doc. #

Quantity

TC1426 TC1247 TC1265 TC1267 TC1266 TC 1276

_________ _________ _________ _________ _________ _________

TC1256

_________

TC1201 TC1057

_________ _________

TC1244

_________

Wellhead Systems Cameron Conventional Surface Wellheads Cameron SSMC Wellhead System Cameron Conductor Sharing Wellhead (CSW) Cameron Mudline Suspension Systems Cameron MBO Multi-Bowl Wellhead Cameron MBS Multi-Bowl Wellhead Cameron Geothermal Wellhead Systems Cameron CAMFORGE™ Wellhead System Valves and Actuators Cameron API 6A Gate Valves (FL, FLS, FLS-R, M, M215) Cameron Willis Saf-T-Gard™ Actuators Cameron FL and FLS Gate Valves Cameron DTS Gate Valve Cameron MS Check Valve Miscellaneous Cameron Tension Integral Tie-Back System Cameron FASTLOCK™ Connector Subsea MOSAIC™ Certified Components MOSAIC Pocket Folder MOSAIC (Modular Subsea and Integrated Completions) SpoolTree™ Production Systems Modular Dual Bore Christmas Trees Subsea Wellheads CAMTROL™ Multiplex Production Control System Wellhead Systems Cameron Mudline Suspension Systems Subsea Valves Cameron API 6A Gate Valves (FL, FLS, FLS-R, M, M215) Cameron FL and FLS Gate Valves Connectors Deepwater High Capacity (DWHC) Collet Connector

Quantity _________ _________ _________ _________

_________ _________ _________ _________ _________

Aftermarket Cameron BOP Replacement Parts Catalog Total Vendor Management Riser Systems LoadKing™ Riser Connector Free-Standing Drilling Riser Connectors Deepwater High Capacity (DWHC) Collet Connector Collet Connector Comparison Cameron API 6A Gate Valves (FL, FLS, FLS-R, M, M215) Cameron FL and FLS Gate Valves Cameron MCS Drilling Valve Cameron Elastomer Technology (CET) Cameron Elastomer Technology Commitment Cameron Elastomer Technology Testing Capabilities CET Information Sheets

92-006 CAMRAM 350 Packers and Top Seals TC988 93-003 Cameron Packer and Top Seal Applications TC1375 94-002 How to Identify CAMRAM Packers and Top SealsTC984 94-003 CAMRAM Field Test Results TC985 94-004 CAMRAM Field Test Results TC986 94-005 CAMRAM 350 Field Test Results TC987 94-007 CAMRAM Fatigue Test Results TC989 94-008 CAMRAM Stripping Test Results TC990 94-009 CAMRAM Comparative Stripping Test Results TC991 96-001 CAMRAM Dual Bore FlexPacker TC1163 96-002 Proper Storage of Elastomer Products TC983 98-002 Cameron VBR-II™ Variable Bore Ram TC1318 99-001 VBR-II Elevated Temperature Test TC1391 99-002 Cameron Inserted Packer for Snubbing/Stripping TC1254 99-003 Cameron Flexpacker-NR™ Ram Packer TC1317 99-004 Improved Cameron DS SBRs TC1399 99-005 Product Identification: CAMRAM/CAMRAM 350 TC1400 99-006 CAMULAR Field Evaluation Test Results TC890

_________ _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ _________

Please see reverse side for Ordering Instructions Cameron Literature Order Form TC1123 1/00

General Literature Request Form Revision Date: 1/00

Ordering Instructions

Make a copy of Literature Request Form and fill it in completely. Be sure to include the following information:

Requester Information: Date Requested

• Your complete physical/street address Requested By

• Your telephone number including area code, city and country codes as appropriate

Company Name

• Your fax number including area code, city and country codes as appropriate

Telephone Number (include area code and/or country and city codes)

• The date you need to receive your materials. Based on the date required, the most cost-effective shipment method will be selected to ensure receipt of materials by the specified date. There will be a rush charge assessed to any order which must be shipped within 48 hours or less from date of receipt.

Fax Number (include area code and/or country and city codes)

Shipping Information: Date Required

Fax Literature Request Form to: Ship to Attention Of

Houston Locations: All Other Locations:

(713) 939-8825 1-800-241-1613

Mail Literature Request Form to: Cameron c/o D.R.I. P.O Box 431662 Houston, Texas 77243

Company Name Street Address (not Post Office Box) City

State

Country

Zip Code

Telephone Number (include area code and/or country and city codes) Fax Number (include area code and/or country and city codes)

Please do not order literature by telephone. Cameron locations must provide a valid 10-digit SAP number. Failure to include a valid SAP number will void your order.

.

0

0

Two-Digit Plant Location

For further information about ordering literature, call Cameron Technical Communications (713) 939-2723.

Cameron Literature Order Form TC1123 1/00

Literature Request Form Revision Date: 8/99

Product Brochures General Cooper Cameron Valves SourceBook Cooper Cameron Valves SourceBook CD ROM Cooper Cameron Valves for Oilfield Applications Cooper Cameron Valves for Industrial Applications

Doc. # TC1315 TC1407 TC1313 TC1194

Ball Valves W-K-M DynaSeal 370D4 2”-4” Ball Valve Data Sheet TC1115 W-K-M DynaSeal 370D4 6”-12” Ball Valve Flyer & Data Sheet TC1007

Quantity ________ ________ ________ ________

Ordering Instructions Make a copy of Literature Request Form and fill it in completely. Be sure to include the following information: • Your complete physical/street address • The date you need to receive your materials. Based on the date required, the most cost-effective shipment method will be selected to ensure receipt of materials by the specified date. There will be a rush charge assessed to any order which must be shipped within 48 hours or less from date of receipt.

________ ________

Butterfly Valves Demco Butterfly Valves for Marine Industry W-K-M Why a Butterfly Valve?

TC1045 WR2545

________ ________

Gate Valves W-K-M Pow-R Seal API 6D Gate Valves W-K-M Saf-T-Seal Gate Valves Demco DT Aluminum Bronze Gate Valves

TC933 TC867 TC1106

________ ________ _________

Fax Literature Request Form to: Houston Locations: (713) 939-8825 All Other Locations: 1-800-241-1613 Mail Literature Request Form to: Cameron c/o D.R.I. P.O Box 431662 Houston, Texas 77243 Please do not order literature by telephone. Requester Information:

Miscellaneous ANSI Products for Pipeline Applications Valves for Fuel Handling Systems Demco/W-K-M Valves for Pulp & Paper Applications W-K-M Digester Blow Valves W-K-M Stress Corrosion in H2S Environments W-K-M Key Pipe Joint Compounds

TC1131 TC1046 TC836 TC911 HS TC1051

________ ________ ________ ________ ________ ________

Date Requested Requested By Company Name Telephone Number (include area code and/or country and city codes)

Chokes Thornhill Craver Chokes and Couplings Engineering and Specifications TC993 _________ Thornhill Craver XBean Flow Correlation Chart XBEANCORR _________ Thornhill Craver Economy Heater Choke (THC) TC1048 _________

Fax Number (include area code and/or country and city codes)

Shipping Information: Date Required

Operation & Maintenance Manuals Ball Valves Cameron Welded Body Ball Valves W-K-M DynaSeal 310 Ball Valves W-K-M DynaSeal 370E-4 Ball Valve W-K-M DynaSeal 370 CT Ball Valve W-K-M 370D Ball Valves Thornhill Craver Adjustable Steam Chokes

Doc. #

Quantity

TC1411 ________ TC856 ________ TC887 ________ TC858 ________ B-370-DM _________ TCOMADJS _________

Ship to Attention Of Company Name Street Address (not Post Office Box) City

State

Country

Zip Code

Telephone Number (include area code and/or country and city codes) Fax Number (include area code and/or country and city codes)

CCV locations include must a valid 10-digit SAP number. Failure to include a valid SAP number will void your order.

.

0

0

Two-Digit Plant Location CCV Literature Order Form TC1124 8/99

Cameron - 2000 Cameron Catalog

Recommend Documents