thera Power & Electricity Meter
Electronic Electron ic Acti ve Energy Energy Meter Meter
Conten ts
Page
Introductions DINDI N-rail rail Mount Mounted ed Single Phase Phase Single Tarif Tarifff DIN-rail Active Energy Energy Meter TEMO15 – C Series , Register Counter
01-02
Single Phase Phase Single Tarif Tarifff DIN-rail Active Energy Energy Meter TEMO15s – C Series, LCD Display
03-04
Single Phase Phase Single Tarif Tarifff DIN-rail Active Energy Energy Meter TEMO15 – D Series, Regist Regist er Counter
05-06
Single Phase Phase Single Tarif Tarifff DIN-rail Active Energy Energy Meter TEMO11 – C Series, Register Counter
07-08
Single Phase Phase Single Tarif Tarifff DIN-rail Active Energy Energy Meter TEMO11 – D Series, LCD Display
09-10
Single Phase Phase Doub Double le Tari Tariffff DIN-rail Active Energy Energy Meter TEMO31 – D Series, LCD Display
11-12
Single Phase Phase Modbus RTU, DIN-rail Active Energy Meter TEMO35 – D Series, LCD Display
13-14
Three Phase Phase,, Single Tariff DIN-rail Active Energy Energy Meter TEMO21 – C Series, Register Counter
15-16
Three Phase Single Tarif Tarifff DIN-rail Active Energy Energy Meter TEMO21 – D Series, LCD Display
17-18
Three Phase Dou Double ble Tari Tariffff DIN-rail Active Energy Energy Meter TEMO41 – D Series, LCD Display
19-20
Three Phase Mod Modbus bus RTU, DIN-rai DIN-raill Acti Active ve Energy Meter TEMO45 – D Series, LCD Display
21-22
Three Phase Phase Multi ultifuncti function, on, Modbus Modbus RTU, RTU, Active Energy Meter Meter TEMO65 – D Series, LCD Display
23-24
Front Board Mounted Single Phase Phase Single Tariff Front Board Board Active Energy Meter TEMO16 – C Series, Register Counter
25-26
Three Phase Prepayment Front Board Acti Active ve Energy Meter TEMO91 – D/L Series, LED/LCD Display
27-28
Three Phase Prepayment Front Board Acti Active ve Energy Meter TEM1O1 – D Series, LCD Display
29-30
Three Phase Phase Double Double Tari Tariffff Front Board Board Active Energy Meter Meter TEMO42 – D Series, LCD Display
31-32
Single Phase Phase Single Tariff Front Board Board Active Energy Meter TEMO12 – D Series, LCD Display
33-34
Three Phase Phase Single Single Tariff Tariff Front Board Board Active Energy Meter Meter TEMO22 – D Series, LCD Display
35-36
Billing System Networks
Catalog 2009 For more detail information Please contact to: to: PT Trajumas Electric Telp: (021) 6828-4820 Fax : (021) 8563-739 www.trajumaselectric.co.cc
Software Billing System (Therasoft Eco), Module Concentrator (TMEX_ 16DI Series, and Converter
37-42
Power Analyze An alyzerr (P (Pow ower er Meter) LCD Multifunction Network Power Monitor Comm. Proto col TPM230D – Build in MODBUS RTU Comm.
Copyright © by thera 01/2009, Subject to change without prior notice
43-44
thera
®
Power & Electricity Meter
TEM015-C Series Single Phase Electronic Active Energy Meter Features
Introductions Model TEM015-C single phase electronic DIN rail active energy meter is a kind of new new style style single phase two wire wire active active energy meter, I t adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques techniques,, etc. I t has its completely independent intellectual property rights and minimum size. It has already passed the test of the international authority KEMA. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse register.
Accuracy Class 1.0 DIN rail mounting Wide rage current measurement SO output Easy installation One modules (1DIN Module) Light Weight & Good reliability
Application Residential Shopping Center or Mall Apartment and Office Building
General Functions •
35mm standard DIN rail standard DIN EN50022.
installation,
complying
with
•
Single pole width (Modulus standard DIN43880.
•
Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register.
•
Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.
•
Bicolor LED instructions power supply state (green) and signal of energy impulse (red).
•
Automatic detection the direction of the flow of load current. And instructions (Only red energy impulse signal when working ,If no green instructions power supply, that is meaning the direction of the flow of load current reverse).
•
Single direction measurement single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC
Industries and Factory
17.5mm), complying with
Applications Network Convenient installation installation for any application as stand alone meter or for any meters use with Pulse Concentrator application: application: Pulse Concentrator
TMEX-16DI Serial Converter
USB/RS232/Ethernet to RS485
C 5 1 0 M E T
C 5 1 0 M E T
C 5 1 0 M E T
TEMO15-C
Modbus RS485
Page
PC (PC Reader Meter) Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
1
Technical Specification: Model
TEM015-C
Connecting Mode
Direct Connection Connections s
Accuracy Class
Class 1.0
Reference Voltage (Un)
230V AC
Network
1 phase 2 wire
Operating Voltage
0.7 ~ 1.3 Un
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A,
Maximum Rates Current (Imax)
30A
Operating Current Range
0.2%Ib ~ Imax
Operati ng Frequency Range Operating Internal Power Consumptio Consumption n Operating Humidity Range
50 Hz + 10% <2W/10VA <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
2000 imp/kWh
Communication Communicatio n
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
6+1 Digits, Register Counter Display
Authority International Standard
IEC / EN 62053-21, and DIN EN520022
Overall Dimensions (W x H x D)
W: 18 mm x H: 90 mm x D: 58.5 mm ( 1 DIN Module)
Overall Dimension
Installation SO
L-IN
1
L-OUT
3
+ -
20
4
N
21
6
N
Ordering code Type / Order No. TEM015 - C4240
Rate Voltage (V)
Rate Current Current (Ib / Imax ) A
Operating Current Range (A)
230
5(30)
0.2%Ib ~ Imax
* if you need different voltage or current specifications, specifications, please advisory our sales
®
thera
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
2
thera
®
Power & Electricity Meter
TEM015S-C Series Single-phase Electronic Energy Meter Features
Applications Model TEM015S-C single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has its completely independent intellectual property rights and minimum size. It has already passed the test of the international. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse
Accuracy Class 1.0 DIN rail mounting Wide rage current measurement Pulse output (Open Collector) Easy installation One modules (1.5 DIN Module) Light Weight & Good reliability
General Functions 35mm standard DIN rail installation, complying with standard DIN EN50022. ● Pole 1.5 width (Modulus 17.5mm), complying with standard DIN43880. ● Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register. ● Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864. ● Two LED instructions power supply state (green) and signal of energy impulse (red). ● Automatic detection the direction of the flow of load current. And Instructions (Only red energy impulse signal when working, that is meaning the direction of the flow of load current reverse). ● Single direction measurement single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21. ● Directly connect and use ● Extension terminals cover, in order to protect to use safety. •
Applications Network Convenient installation for any application as stand alone meter or for any meters use with Pulse Concentrator application: Pulse Concentrator
TMEX-16DI Serial Converter
USB/RS232/Ethernet to RS485
s 5 1 0 M E T
s 5 1 0 M E T
s 5 1 0 M E T
TEMO15S-C
Modbus RS485
Page
PC (PC Reader Meter) Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
3
Technical Specification: Model
TEM015S-C
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
230V AC
Network
1 phase 2 wire
Operating Voltage
0.7 ~ 1.3 Un
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
10A,
Maximum Rates Current (Imax)
63A
Operating Current Range
0.2%Ib ~ Imax
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA per phase <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
1000 imp/kWh
Communication
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
6+1 Digits Register Counter
Authority International Standard
IEC/EN 62053-21, DIN EN50022
Overall Dimensions (W x H x D)
W: 26 mm x H: 90 mm x D: 58.5 mm( 1.5DIN, Module 17.5mm)
Overall Dimension
Installation
Ordering code Type / Order No. TEM015S - CB250
Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
230
10(63)
0.2%Ib ~ Imax
* if you need different voltage or current specifications, please advisory our sales
®
thera
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
4
thera
®
Power & Electricity Meter
TEM015-D Series Single Phase Electronic Active Energy Meter With Backlight LCD Display Features
Introductions Model TEM015-D backlight single phase electronic DIN rail active energy meter adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has its completely independent intellectual property rights and minimum size. The meter completely accord with relevant technical require ments of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consump tion from single phase AC electricity net. This meter has green backlight source eight digits LCD displays shows the active energy consumption.It has following features:good reliability, small volume, light weight, specious nice appearance, convenient installation, etc
Accuracy Class 1.0 DIN rail mounting Wide rage current measurement SO output Easy installation One modules (1DIN Module) Light Weight & Good reliability
Application Residential Shopping Center or Mall Apartment and Office Building
General Functions •
35mm standard DIN rail installation, complying with standard DIN EN50022.
•
Single pole width (Modulus 17.5mm), complying with standard DIN43880.
•
It displays by Green backlight source eight digits LCD, users can choose setting 6+1 digits display.
•
There is a maintenance-free lithium batteries in it, with a button and an ECP port., it use for displaying power cut reading, self-checking function and display the median choice.
•
Users can cleared the total electricity counter, clearing operation with function of ECP and eight password double protection, users can set the password arbitrary.
•
Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.
•
Automatic detection the direction of the flow of load current. And instructions on LCD (when display HELP 1 on LCD, that is meaning the direction of the flow of load current reverse).
Industries and Factory
Network Pulse Concentrator Tmex-16DI
Serial Converter
USB/RS232/Ethernet to
TEMO15-D
2-Wire RS485 Net
Page TEMO15D
TEMO15D
PC (Personal Computer) Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
5
Technical Specification: Model
TEM015-D
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
230V AC
Network
1 phase 2 wire
Operating Voltage
0.7 ~ 1.3 Un
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A,
Maximum Rates Current (Imax)
30A
Operating Current Range
0.2%Ib ~ Imax
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
1000 imp/kWh
Communication
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
6+1 Digits Register Counter
Authority International Standard
IEC61036, DIN EN50022
Overall Dimensions (W x H x D)
W: 18 mm x H: 90 mm x D: 58.5 mm ( 1 DIN Module)
Overall Dimension
Installation
Ordering code Type / Order No. TEM015 - D4240
Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
230
5(30)
0.2%Ib ~ Imax
* if you need different voltage or current specifications, please advisory our sales
®
thera
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
6
thera
®
Power & Electricity Meter
TEM011-C Series Single-phase Electronic Energy Meter Features
Applications Model TEM011-C single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation.
Accuracy Class 1.0 DIN rail mounting Wide rage current measurement SO output Easy installation Four modules (4DIN Module) Light Weight & Good reliability
General Functions •
•
•
•
•
35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993. Standard configuration 5+1 digits display (99999.1kWh) by step motor and pulse machinery counter. May select 6+1 digits display (Product Configuration code is AK). Standard configuration one port of pulse output passive (polarity), May select increase a distant port of pulse output passive (no polarity), (Product Configuration code is AI). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864. Bicolor LED instructions power state (green) and signal of power impulse (red). Standard configuration don’t detect direction of the trend of load current. May select Automatic Detecting the direction of the trend of load current. And instructions (Only red power pulse signal when working, that is meaning the load current reverse).
Applications Network Convenient installation for any application as stand alone meter or for any meters use with Pulse Concentrator application: Pulse Concentrator
TMEX-16DI Serial Converter
USB/RS232/Ethernet to RS485
TEMO11-C
Modbus RS485
TEM011
TEM011
TEM011
Page
PC (PC Reader Meter) Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
7
Technical Specification: Model
TEM011-C
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
230V AC
Network
1 phase 2 wire
Operating Voltage
0.7 ~ 1.3 Un
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A, 10A, 20A
Maximum Rates Current (Imax)
30A, 65A, 100A
Operating Current Range
0.04%Ib ~ Imax
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA per phase <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
3200, 1600, 800 imp/kWh
Communication
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
5+1 Digits Register Counter
Authority International Standard
IEC61036, DIN EN50022
Overall Dimensions (W x H x D)
W: 75 mm x H: 88 mm x D: 73 mm ( 4 DIN Module)
Overall Dimension
Installation
Ordering code Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM011 - C4230
230
5(30)A
0.04%Ib ~ Imax
TEM015 - CA220
230
10(65)A
0.04%Ib ~ Imax
TEM015 - CE210
230
20(100)
0.04%Ib ~ Imax
Type / Order No.
®
thera
* if you need different voltage or current specifications, please advisory our sales
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
8
thera
®
Power & Electricity Meter
TEM011-D Series Single Phase Electronic Active Energy Meter Introductions
Features
Model TEM011-D single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has seven digits LCD displays shows the active energy consumption. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.
General Functions
Accuracy Class 1.0 DIN rail mounting Wide rage current measurement SO output & RS485 (optional) Easy installation Four modules (4DIN Module) Light Weight & Good reliability
Application Residential Shopping Center or Mall Apartment and Office Building
•
35mm standard DIN rail installation, complying with standard DIN EN50022.
•
Six pole width (Modulus 12.5mm).
•
Standard configuration 6+1 digits LCD display.
•
Standard configuration Impulse output passive (polarity), May select distant impulse output passive (no polarity). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.
•
Two LED instructions respectively power supply state (green) and signal of energy impulse (red).
•
Standard configuration don’t detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions by an individual LED.
•
Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21
Industries and Factory
Applications Network Convenient installation for any application as stand alone meter or for any meters use with Pulse Concentrator application: Pulse Concentrator
TMEX-16DI Serial Converter
TEMO11- D
USB/RS232/Ethernet to RS485
Modbus RS485
TEM011D
TEM011D
TEM011D
Page
PC (PC Reader Meter) Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
9
Technical Specification: Model
TEM011-D
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
230V AC
Network
1 phase 2 wire
Operating Voltage
0.7 ~ 1.3 Un
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A, 10A, 20A
Maximum Rates Current (Imax)
30A, 65A, 100A
Operating Current Range
0.04%Ib ~ Imax
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
3200, 1600, 800 imp/kWh
Communication
Pulse Output (Open Collector), & RS485 port (optional)
Display
6+1 Digits LCD Display
Authority International Standard
IEC61036, DIN EN50022
Overall Dimensions (W x H x D)
W: 75 mm x H: 88 mm x D: 73 mm ( 4 DIN Module)
Overall Dimension
Installation
Ordering code Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM011 - D4230
230
5(30)A
0.04%Ib ~ Imax
TEM011 - DA220/D7220
230
10(65)A
0.04%Ib ~ Imax
TEM011 - DE210
230
20(100)
0.04%Ib ~ Imax
Type / Order No.
®
thera
* if you need different voltage or current specifications, please advisory our sales
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
10
thera
®
Power & Electricity Meter
TEM031-D Series Single-phase Electronic Energy Meter Multi-rate (Double Tariff) Introduction
Features
Model TEM031-D single phase electronic multi-rate DIN rail active energy meter is a kind of single phase two wire three tariffs (time-sharing billing) active energy meter, the meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has seven digits LCD displays shows various consumption data and information. And there are far infrared and RS485 communication module in it. It is use for setting and reading the meter. Contact with all kind of AMR system conveniently. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation.
•
35mm standard DIN rail installation, complying with standard DIN EN50022.
•
four pole width (Modulus 18.5mm).
•
Have three tariffs, may select 12 daily period of times. There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after blackout.
•
A port of pulse output passive (polarity), complying with standard IEC 62053-31.
•
There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter. Seven LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the state rates just now and the data communications state.
•
Multi-rate or Double tariff Wide rage current measurement Pulse output (SO) RS485 and Infra Red port Built-in Time Switch (settable) Easy installation DIN rail mounting Four modules (4DIN Module)
General Functions
•
Accuracy Class 1.0
Light Weight & Good reliability
Application Residential Office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Panel Telecommunications (BTS)
Single direction measure single phase two wire active energy consumption. Complying with standard IEC 62053-21
Network Application Convenient installation for any application as stand alone meter or for any meters with Pulse or RS485 network application: Pulse Concentrator
TMEX-16DI Serial Converter
USB/RS232/Ethernet to RS485
RS485
TEMO31- D PC (PC Reader Meter) Temo31D
Temo31D
Temo31D
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
11
Technical Specification: Model
TEM031-D
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
230V AC
Network
1 phase 2 wire
Operating Voltage
0.7 ~ 1.3 Un
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A, 10A, 20A
Maximum Rates Current (Imax)
30A, 65A, 100A
Operating Current Range
0.04%Ib ~ Imax
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA per phase <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
3200, 1600, 800 imp/kWh
Communication Port
RS485 Modbus communications + Infra RED Port
Output
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
6+1 Digits LCD Display
Authority International Standard
IEC61036, DIN EN50022
Overall Dimensions (W x H x D)
W: 75 mm x H: 88 mm x D: 73 mm ( 4 DIN Module)
Overall Dimension
Installation
Ordering code Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM031 - D4233
230
5(30)A
0.04%Ib ~ Imax
TEM031 - DA223
230
10(65)A
0.04%Ib ~ Imax
TEM031 - DE213
230
20(100)
0.04%Ib ~ Imax
Type / Order No.
®
thera
* if you need different voltage or current specifications, please advisory our sales
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
12
®
thera
Power & Electricity Meter
TEM035-D Series
New
Single-phase Electronic Energy Meter With Modbus RTU Communication Output ( Port RS485 )
Introduction
Feature
New TEMO35-D Series is a DIN rail single phase two wire electronic energy meter with modbus communication protocol. The total energy consumption is showing via 6+1 (7 digit) LCD displayed based on kWh and the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for V, A, Hz, Cos Pi and VA. The meter is provided with a non-volatile memory system that ensures that the readings are not lost or altered when power off.
Accuracy Class 1.0
With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the active energy consumption data from distance.
General Specification We have introduced a large scale of energy meters on the market suitable for 220/230V AC to 300V AC (50 or 60Hz). Although we produce the thera TEMO35D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 10(100)A direct measuring.
DIN-Rail mounting Wide rage current measurement SO (Pulse) output RS485 MODBUS RTU communication Protocol Easy installation Seven modules ( 4 DIN )
Easy setting on meter Via key-press: Modbus-RS485 ID-Address device programming Baud rate Programming
Application Convenient installation for any application as stand alone meter or for any meters with modbus RS485 network application: Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Serial Converter
other Modbus device
USB/RS232/Ethernet to RS485 2-Wire RS485 Net
TEMO35-D TEMO35-D
TEMO35-D
TEMO35-D
PC (Modbus Master)
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
13
Technical Specification: Model
TEM035-D
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
220/230V AC
Network
1 phase 2 wire
Operating Voltage
161/300 AC
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A, 10A direct connection
Maximum Rates Current (Imax)
100A direct connection
Operating Current Range
0.4%Ib ~ Imax
Operating Frequency Range
50 Hz + 10%
Internal Power Consumption
<2W/10VA
Operating Humidity Range
<75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
1000 imp/kWh
CT Changing –Ratio
NA
Data Communication port
RS485 port with baud rate 4800,9600 bps user settable
Data Save
Display
The data can be stored more than 20 years when power off MODBUS RTU with 16 bit CRC Address range 0-247 user settable 7 Digit LCD Display ( 6 digit + 1 Decimal )
Authority International Standard
IEC / EN62053-21, and DIN EN520022
Overall Dimensions (W x H x D)
W: 75.50 mm x H: 88.00 mm x D: 73.08 mm (4 DIN Module)
Protocol
Installation
L/L N/N 5 and 6 7 and 8
Overall Dimension
Phase line IN/OUT Neutral line IN/OUT Test pulse output contract Modbus RS485 communications
Height Weight Depth
88.00 mm 75.50 mm 73.08 mm
Ordering code Type / Order No.
®
thera
Rate Voltage (V)
Rate Current (I b / Imax ) A
Operating Current Range (A)
TEM035 - DA241
230
10(60)A
0.04%Ib ~ Imax
TEM035 - DC241
230
10(100)A
0.04%Ib ~ Imax
* if you need different voltage or current specifications, please advisory our sales
Power & Electricity Meters
Page Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
14
thera
®
Power & Electricity Meter
TEM021-C Series Three Phase Electronic Active Energy Meter Features
Introductions Model TEM021 three phase four wire electronic DIN rail active energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc
Seven modules (7DIN Module) Light Weight & Good reliability
Application Residential Shopping Center or Mall Apartment, Hotel & Office Building
General Functions •
35mm standard DIN rail installation, complying with standard DIN EN50022.
•
Ten pole width (Modulus 12.5mm).
•
Standard configuration 6 digits display (999999kWh) by step motor type impulse register.
•
There are a polarity port of pulse output passive closed and a non polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.
•
Five LED instructions respectively every power supply state and signal of closed energy impulse and distant energy impulse.
•
Automatic current.
•
Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
detection
Accuracy Class 1.0 DIN rail mounting Wide rage current measurement SO output Easy installation
the
Industries and Factory
direction of the flow of load
Applications Network Convenient installation for any application as stand alone meter or for any meters use with Pulse Concentrator application: Pulse Concentrator
TEMO21- C
TMEX-16DI Serial Converter
USB/RS232/Ethernet to RS485
Modbus RS485
Page
PC (PC Reader Meter) TEM021-C
TEM021-C
TEM021-C Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
15
Technical Specification: Model
TEM021-C
Connecting Mode
Direct Connections or CT Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
3X230/400V AC (3~)
Network
3 phase 4 wire
Operating Voltage
161/279-300/520V AC (3 ~)
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
1.5A via CT or 5A, 10A direct connection
Maximum Rates Current (Imax)
6 A Via CT or 100A direct connection
Operating Current Range
0.2%Ib ~ Imax Via CT or 0.5%Ib ~ Imax for Direct Connections
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA per phase <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
1600 imp/kWh for CT and 160 imp/kWh for direct connection
Output
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
5+1 Digits Register Counter Display
Authority International Standard
IEC61036, DIN EN50022
Overall Dimensions (W x H x D)
W: 125 mm x H: 88 mm x D: 73 mm ( 7DIN Module )
Overall Dimension
Installation CT Connections
Direct Connections
Ordering code Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM021 - C0520
3x230/400
CT/5A
0.04%Ib ~ Imax
TEM021 - C0520
3x230/400
5(100)A
0.04%Ib ~ Imax
TEM021 - C7500
3x230/400
10(100)A
0.04%Ib ~ Imax
TEM021 - C8500
3x230/400
10(100)
0.04%Ib ~ Imax
Type / Order No.
®
thera
Power & Electricity Meters
* if you need different voltage or current specifications, please advisory our sales
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
Page
16
thera
®
Power & Electricity Meter
TEM021-D Series Three Phase Electronic Active Energy Meter Introductions
Features
Model TEM021-D three phase four wire electronic DIN rail active energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc
Accuracy Class 1.0 DIN rail mounting Wide rage current measurement SO output Easy installation Seven modules (7DIN Module) Light Weight & Good reliability
Applications Residential Shopping Center or Mall Apartment and Office Building
General Functions •
35mm standard DIN rail installation, complying with standard DIN EN50022.
•
Ten pole width (Modulus 12.5mm).
•
Standard configuration 6 digits display (999999kWh) by step motor type impulse register.
•
There are a polarity port of pulse output passive closed and a non polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.
•
Five LED instructions respectively every power supply state and signal of closed energy impulse and distant energy impulse.
•
Automatic current.
•
Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
detection
the
Industries and Factory
direction of the flow of load
Applications Network Convenient installation for any application as stand alone meter or for any meters use with Pulse Concentrator application: Pulse Concentrator
TMEX-16DI Serial Converter
TEMO21D
USB/RS232/Ethernet to RS485
Modbus RS485
Page
PC (PC Reader Meter) TEM021-D
TEM021-D
TEM021-D Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
17
Technical Specification: Model
TEM021-LCD Display
Connecting Mode
Direct Connections or CT Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
3X230/400V AC (3~)
Network
3 phase 4 wire
Operating Voltage
161/279-300/520V AC (3 ~)
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Basic Rate Current (Ib)
5A, 10A direct connection
Maximum Rates Current (Imax)
Via CT/5A or 100A direct connection
Operating Current Range
0.2%Ib ~ Imax Via CT or 0.5%Ib ~ Imax for Direct Connections
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA per phase <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 550 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
1600 imp/kWh for CT and 160 imp/kWh for direct connection
Export SO ( Add. Pulse output )
SO 100 imp/kWh for CT and SO 10 imp/kWh
Pulse Output
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
7 Digits LCD Display
Authority International Standard
IEC62053-21, DIN EN50022
Overall Dimensions (W x H x D)
W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module )
Overall Dimension
Installation CT Connections
Direct Connections
Ordering code Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM021 - D05C0
3x230/400
CT/5A
0.04%Ib ~ Imax
TEM021 - D85G0
3x230/400
5(100)A
0.04%Ib ~ Imax
TEM021 - DC5G0
3x230/400
10(100)A
0.04%Ib ~ Imax
Type / Order No.
®
thera
* if you need different voltage or current specifications, please advisory our sales
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
18
thera
®
Power & Electricity Meter
TEM041-D Series Three Phase Electronic Active Energy Meter Multi-rate (Double Tariff) Introductions
Features
Model TEM041 Series three phase four wire electronic multi-rate DIN rail active energy meter is a kind of three phase four wire three tariffs (time-sharing billing) active energy meter, the meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. This meter has seven digits LCD displays shows various consumption data and information. And there are far infrared and RS485 communication module in it. It is use for setting and reading the meter. Contact with all kind of AMR system conveniently. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient
Accuracy Class 1.0 Multi-rate or Double tariff Wide rage current measurement Pulse output (SO) RS485 and Infra Red port Built-in Time Switch (settable) Easy installation DIN rail mounting Four modules (4DIN Module)
General Functions
Light Weight & Good reliability
•
35mm standard DIN rail installation, complying with standard DIN EN50022.
•
Ten pole width (Modulus 12.5mm), complying standard JB/T7121-1993
with
•
Have three tariffs, may select 12 daily period of times. You can set the date arbitrary which can automatic read the meter every month. May select single tariff function in weekend. (Please specified when ordering).
•
There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after blackout.
•
There are a polarity port of pulse output passive closed and a no polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select), Complying with standard IEC 62053-31 and DIN 43864.
•
There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter.
•
Ten LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the tariff state just now and the data communications state.
Application Residential Office/Commercial Building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Panel Telecommunications (BTS)
Network Pulse Concentrator Tmex-16DI
Serial Converter
RS485/RS323
TEMO41- D
2-Wire ModbusNet 2-Wire RS485Net
Use possibility:
TEMO41-D
TEMO41-D
TEMO41-D
PC (Personal Computer)
Pulse Modbus Net RS485 Net
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
19
Technical Specification: Model
TEM041- D Series
Connecting Mode
Direct Connections or CT Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
3X230/400V AC (3~)
Network
3 phase 4 wire
Operating Voltage
161/279-300/520V AC (3 ~)
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
CT or 5A, 10A direct connection
Maximum Rates Current (Imax)
Via CT or 100A direct connection
Operating Current Range
0.2%Ib ~ Imax Via CT or 0.5%Ib ~ Imax for Direct Connections
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA per phase <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
1600 imp/kWh for CT and 160 imp/kWh for direct connection
Communication Port
RS485 Modbus communications and far Infrared port
Output
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
6+1 Digits Register LCD Display
Authority International Standard
IEC61036, DIN EN50022
Overall Dimensions (W x H x D)
W: 125 mm x H: 88 mm x D: 73 mm ( 7DIN Module )
Overall Dimension
Installation
CT Connections
Direct Connections
Ordering code Type / Order No.
®
thera
Power & Electricity Meters
TEM041 - D0523 TEM041 - D7523 TEM041 - D8503
Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
3x230/400 3x230/400 3x230/400
CT/5A 5(100)A 10(100)A
0.04%I b ~ Imax 0.04%Ib 0.04%I b ~ Imax
* if you need different voltage or current specifications, please advisory our sales
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
Page
20
®
thera
Power & Electricity Meter
TEM045-D Series
New
Three-phase Electronic Energy Meter With Modbus RTU Communication Output ( Port RS485 )
Introduction
Feature
New TEMO45-D Series is a DIN rail three phase four wire electronic energy meter with modbus communication protocol. The total energy consumption is showing via 6+1 (7 digit) LCD displayed based on kWh and the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for V, A, Hz, Cos Pi and VA. The meter is provided with a non-volatile memory system that ensures that the readings are not lost or altered when power off.
Accuracy Class 1.0
With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the active energy consumption data from distance.
General Specification We have introduced a large scale of energy meters on the market suitable for 3 x 220V AC to 380V AC (50 or 60Hz). Although we produce the thera TEMO45D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 3 x 10(100)A direct measuring or direct reading Programmable CT ratio from 5/5A to 5000/5A.
DIN-Rail mounting Wide rage current measurement SO (Pulse) output RS485 MODBUS RTU communication Protocol Easy installation Seven modules ( 7 DIN ) Programmable CT Ratio from 5/5A to 5000/5A
Easy setting on meter Via key-press: CT Ratio Programming Modbus-RS485 ID-Address device programming Baud rate Programming
Application Convenient installation for any application as stand alone meter or for any meters with modbus RS485 network application: Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Serial Converter
other Modbus device
USB/RS232/Ethernet to RS485 2-Wire RS485 Net
TEMO45-D TEMO45-D
TEMO45-D
TEMO45-D
PC (Modbus Master)
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
21
Technical Specification: Model
TEM045-D
Connecting Mode
Direct Connections or CT (with current transformer)
Accuracy Class
Class 1.0
Reference Voltage (Un)
3x220/380V AC (3~)
Network
3 phase 4 wire
Operating Voltage
161/279-380/400 AC (3~)
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A, 10A direct connection
Maximum Rates Current (Imax)
100A direct connection or CT/5A
Operating Current Range
0.4%Ib ~ Imax
Operating Frequency Range
50 Hz + 10%
Internal Power Consumption
<2W/10VA per phase
Operating Humidity Range
<75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
3600 imp/kWh for CT and 400 imp/kWh for direct connection
CT Changing –Ratio
Fully Programmable CT Ratio 5/5A to 5000/5A
Data Communication port
RS485 port with baud rate 4800,9600 bps user settable
Data Save
Display
The data can be stored more than 20 years when power off MODBUS RTU with 16 bit CRC Address range 0-247 user settable 7 Digit LCD Display ( 6 digit + 1 Decimal )
Authority International Standard
IEC / EN62053-21, and DIN EN520022
Overall Dimensions (W x H x D)
W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module)
Protocol
Overall Dimension
Installation Direct Connections L1/L1 Ua In/Out L2/L2 Ub In/Out L3/L3 Uc In/Out N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port
CT Connections 1 3 5 N/N 11/12 15/16 L1/L1 L2/L2 L3/L3
Ua In Ub In Uc In Un Neutral In/Out (-),(+) Test pulse Output (-),(+) RS485 comm. Port Ia IN/OUT Ib IN/OUT Ic IN/OUT
Dimension : W : 126 mm x H: 130 mm x D: 65 mm
Ordering code
®
thera
Type / Order No.
Rate Voltage (V)
Rate Current (I b / Imax ) A
Operating Current Range (A)
TEM045 - D0523
3 x 230/400
3 x CT/ 5A
0.04%Ib ~ Imax
TEM045 - DC573
3 x 230/400
3 x 10(100)A
0.04%Ib ~ Imax
* if you need different voltage or current specifications, please advisory our sales
Power & Electricity Meters
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
22
®
thera
Power & Electricity Meter
TEM065-D Series
New
Three-phase Electronic Multi-rate Energy Meter With Modbus RTU Communication Output (Port RS485)
Introduction
Feature
New TEMO65-D Series is a DIN rail three phase four wire electronic Multi-rate energy meter with modbus RTU communication protocol. The total energy consumption is showing via 6+1 (7 digit) LCD displayed based on kWh the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for kWh, Kvarh, V, A, Hz, PF, W and VA. The meter is provided with a non-volatile memory system that ensures that the readings are not lost or altered when power off.
Accuracy Class 1.0 Multi-Tariff functions (4 tariff) DIN-Rail mounting Wide rage current measurement Build-in SO (Pulse) output RS485 MODBUS RTU communication Protocol Easy installation
With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the energy consumption data from distance.
Seven modules ( 7 DIN )
General Specification
Easy setting on meter Via key-press:
We have introduced a large scale of energy meters on the market suitable for 3 x 220V AC to 380V AC (50 or 60Hz). Although we produce the thera TEMO45D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 3 x 10(100)A direct measuring or direct reading Programmable CT ratio from 5/5A to 5000/5A.
Programmable CT Ratio from 5/5A to 5000/5A
CT Ratio Programming Modbus RTU ID-Address device programming Baud rate Programming
Application Convenient installation for any application as stand alone meter or for any meters with modbus RTU (RS485) network application as for: Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Serial Converter
other Modbus device
Modbus RTU
USB/RS232/Ethernet to RS485
TEMO65-D PC (Modbus Master)
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
23
Technical Specification: Model
TEM065-D
Connecting Mode
Direct Connections or CT (with current transformer)
Accuracy Class
Class 1.0
Reference Voltage (Un)
3x220/380V AC (3~)
Network
3 phase 4 wire
Operating Voltage
161/279-380/400 AC (3~)
AC Voltage withstand
2 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
10A Basic Current
Maximum Rates Current (Imax)
60A, 100A direct connection or with external CT/5A
Operating Current Range
0.4%Ib ~ Imax
Operating Frequency Range
50 Hz + 10%
Internal Power Consumption
<2W/10VA per phase
Operating Humidity Range
<75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
3600 imp/kWh for CT and 400 imp/kWh for direct connection
CT Changing –Ratio
Fully Programmable CT Ratio 5/5A to 5000/5A
Data Communication port
RS485 port with baud rate 4800,9600 bps user settable
Data Save
Display
The data can be stored more than 20 years when power off MODBUS RTU with 16 bit CRC Address range 1-247 user settable 7 Digit LCD Display ( 6 digit + 1 Decimal )
Authority International Standard
IEC / EN62053-21, and DIN EN520022
Overall Dimensions (W x H x D)
W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module)
Protocol
Overall Dimension
Installation 11
-
12
+
15
485/ CM bus +
16
Direct Connections
so
L1
L1
L2
L2
Ub
L3
L3
Uc
N
N
Un
11
CT Connections
-
so
12
+
15
485/ CMbus +
16
Ua
L1/L1 Ua In/Out L2/L2 Ub In/Out L3/L3 Uc In/Out N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port
1
Ua
I a-
L1
L1
I a+
3
Ub
I b-
L2
L2
I b+
5
Uc
I c-
L3
L3
I c+
N
N
Un
1 3 5 N/N 11/12 15/16 L1/L1 L2/L2 L3/L3
Ua In Ub In Uc In Un Neutral In/Out (-),(+) Test pulse Output (-),(+) RS485 comm. Port Ia IN/OUT Ib IN/OUT Ic IN/OUT
Dimension : W : 126 mm x H: 130 mm x D: 65 mm
Ordering code
®
thera
Type / Order No.
Rate Voltage (V)
Rate Current (I b / Imax ) A
Operating Current Range (A)
TEM065 - D0481
3 x 230/400
3 x CT/ 5A
0.04%Ib ~ Imax
TEM065 - DC481
3 x 230/400
3 x 10(100)A
0.04%Ib ~ Imax
* if you need different voltage or current specifications, please advisory our sales
Power & Electricity Meters
Page Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
24
thera
®
Power & Electricity Meter
TEM016 – Series Single Phase Electronic Active Energy Meter Front Board Installed Introductions Model TEM016 single phase electronic front board installed active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21 and SPLN D3.005-1 : 2008. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it is use for setting indoor or outdoor and it can display total energy consumption by step motor type impulse register. It has following features: good reliability, light weight, specious nice appearance, convenient installation.
General Functions •
Front board three fixed holes installation, the cover is made of high definition transparent glass material molded overall, the base of the is made of steel and anti-rust, meter and the terminal block is made of quality bakelite material which is moisture-resistant, fire-retardant, high temperature molded overall. It has following features: Good weather ability, high rigid, specious appearance, etc.
•
Standard configuration 5+1 digits display (99999.1kWh) by step motor and pulse machinery counter.
•
Standard configuration one port of pulse output passive (polarity) May select increase a distant port of pulse output passive (no polarity). And contact with all kind of AMR system conveniently complying with standard IEC 62053-31 and DIN 43864.
•
Standard configuration three LED instructions, power state (green), signal of power impulse (yellow) and automatic detection of Anti-Tampering (red).
•
Single direction two component measure single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.
•
Automatic detect current of phase line and neutral line when the two current error will automatic show the fault signal.
•
Extended cover and base plate MCB compatible (Compact), in order to protect to use electricity safety.
Application
Features Accuracy Class 1.0 Front Board/Wall Mounting Wide rage current measurement Pulse output (kWh) Easy installation Anti—Tamper High definition transparent glass Material cover. Steel & anti-rust body case Light Weight & Good reliability
TEMO16
Residential Segment Page
Commercial Segment Catalog thera , 01/2010
Copyright © by thera 01/2010, Subject to change without prior notice
25
Technical Specification: Model
TEM016 - Series
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
230V AC
Network
1 phase 2 wire
Operating Voltage
168-300V AC
AC Voltage withstand
4 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rates Current Ib(Imax)
5 (60)A, direct connection
Starting Current Range
0.004Ib, direct connection
Operating Current Range
0.05Ib ~ Imax , direct connection
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 850 C
Storage Temperature Range
-200 C ~ + 850 C
Pulse Output rate (meter constant)
1600 imp/kWh
Indicator
Three Color LED (Power:green, pulse rate:yellow, & Anti Tamper with red LED color)
Output
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
5+1 Digits Register Counter Display
Authority International Standard
IEC61053-21; SPLN D3.005-1:2008
Overall Dimensions (W x H x D)
W: 142.5 mm x H: 211 mm x D: 67 mm
Overall Dimension
Installation
Ordering code Type / Order No. ®
thera
TEM016 - C3230
Rate Voltage (V)
Rate Current (Ib / Imax ) A
Starting Current Range (A)
230
5(60)A
0.004I b (Direct)
* if you need different voltage or current specifications, please advisory our sales
Page
Power & Electricity Meters
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
26
thera
®
Power & Electricity Meter
TEM091- L Series Single-Phase Prepayment Electronic Energy Meter Front Board Installed Applications
Features
Model TEM091- L series single phase electronic prepayment front board installed active energy meter is a kind of single phase two wire active energy meter which purchase electricity by IC card, electric energy measuring, load control and using electricity management. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it is use for setting indoor or out door meter box. This meter has LED display shows power. It has following features: good reliability, light weight, specious nice appearance, convenient installation, etc.
Accuracy Class 1.0 Front Board/Wall Mounting Wide rage current measurement SO output Easy installation Smart IC Card Light Weight & Good reliability
General Functions •
•
•
•
•
•
•
Standard configuration one meter one card, can repeat input money from PC machinery which with IC programmer, may select one-time recharge card. (Please specified when ordering). It has IC card with code and data against false, standard configuration use storage IC card. Standard configuration payment by kWh, may select payment by money. It has load control and function of automatic fault detection and instructions, standard configuration without function of open terminals cover and detection. A port of pulse output passive closed (polarity), complying with standard IEC 62053-31 and standard DIN 43864. Two LED instructions signal of energy impulse (red) and direction of the flow of load current (yellow). Automatic detection the direction of the flow of load current. When the yellow LED display, that is meaning the direction of the flow of load current reverse. Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
TEMO91– L
Applications • •
•
Residential Office/Commercial building Shopping Center (Mall) Card
TEM091L/D
Accessories
Card
TEM091L/D
Vending Card RS232 (COM)
Prepaid Management Software (PC)
Vending
Software Page
27 Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
Technical Specification: Model
TEM091-L Series
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
230 V AC
Network
1 phase 2 wire
Operating Voltage
161~279/300 AC
AC Voltage withstand
4 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A, 10A , 20A direct connection
Maximum Rates Current (Imax)
30A, 40A, 100A direct connection
Operating Current Range
0.4%Ib ~ Imax
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA per phase <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
1600 imp/kWh
Output
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
6+1 Digits Register LCD Display & 5+1 Digits for LED Display
Authority International Standard
IEC61053-21
Overall Dimensions (W x H x D)
W: 110 mm x H: 201 mm x D: 68 mm
Overall Dimension
Installation
Ordering code Type / Order No.
®
thera
Power & Electricity Meters
TEM091 - L4230 TEM091 - LA220 TEM091 - LE210
Rate Voltage (V)
230 Vac 230 Vac 230 VaC
Rate Current (Ib / Imax ) A
Operating Current Range (A)
5(20)A 10(40)A 20(100)A
0.04%I b ~ Imax 0.04%I b ~ Imax 0.04%I b ~ Imax
* if you need different voltage or current specifications, please advisory our sales
Page
28 Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
thera
®
Power & Electricity Meter
TEM101– L Series Three Phase Prepayment Electronic Active Energy Meter Front Board Installed Introductions
Features
Model TEM101-L three phase four wire electronic prepayment front board installed active energy meter is a kind of three phase four wire active energy meter which purchase electricity by IC card, electric energy measuring, load control and using electricity management. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net, it is use for setting indoor or out door meter box. This meter has LED display shows power. It has following features: good reliability, light weight, specious nice appearance, convenient installation, etc.
Accuracy Class 1.0 Front Board/Wall Mounting Wide rage current measurement SO output Easy installation Smart IC Card Light Weight & Good reliability
General Functions •
It support repeat recharge and one-time recharge from IC programmer and PC machinery online at the same time.
•
The IC card use logic and encryption, with code and data against false.
•
Standard configuration payment by money
•
It has load control and function of automatic fault detection and instructions, standard configuration without function of open terminals cover and detection, may select open terminals cover and cut power.
•
6 LED digits display, 5+1 digits display (99999.1kWh), may select 7 LCD digits display.
•
A port of pulse output passive closed (polarity), complying with standard IEC 62053-31 and standard DIN 43864.
•
Five LED instructions power supply state, signal of energy impulse and direction of the flow of load current.
•
Automatic detection the direction of the flow of load current. When the yellow LED display, that is meaning the direction of the flow of load current reverse.
•
Single direction three component measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
payment
Application
Vending Machine RS232COM
CARD
1 0 1 M E T
by kWh, may select
CARD
TEM1O1– L
1 0 1 M E T
PC Management Software
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
29
Technical Specification: Model
TEM101-L Series
Connecting Mode
Direct Connections
Accuracy Class
Class 1.0
Reference Voltage (Un)
3x230/400V AC
Network
3 phase 4 wire
Operating Voltage
161/279-300/520V AC
AC Voltage withstand
4 KV for 1 minute
Impulse Voltage
6kV-1.2/50μS waveform
Rate Current (Ib)
5A, 10A , 20A direct connection
Maximum Rates Current (Imax)
30A, 40A, 100A direct connection
Operating Current Range
0.4%Ib ~ Imax
Operating Frequency Range Internal Power Consumption Operating Humidity Range
50 Hz + 10% <2W/10VA per phase <75%
Storage Humidity Range
<95%
Operating Temperature Range
-150 C ~ + 500 C
Storage Temperature Range
-300 C ~ + 700 C
Pulse Output rate (meter constant)
100 imp/kWh
Output
Pulse Output (Open Collector), Suitable to connect to BAS System
Display
7 Digits Register LCD Display
Authority International Standard
IEC61053-21
Overall Dimensions (W x H x D)
W: 145 mm x H: 218 mm x D: 73 mm
Overall Dimension
Installation
Ordering code Type / Order No.
®
thera
Power & Electricity Meters
TEM101 - L3520 TEM101 - L7500 TEM101 - LC500
Rate Voltage (V)
Rate Current (Ib / Imax ) A
Operating Current Range (A)
3x230/400 3x230/400 3x230/400
5(25)A 10(50)A 15(90)A
0.04%I b ~ Imax 0.04%I b ~ Imax 0.04%I b ~ Imax
* if you need different voltage or current specifications, please advisory our sales
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
Page
30
®
thera
Power & Electricity Meter
THERASOFT
New
Eco Energy Management Software & Control Remote Energy Supervision Of Low and Medium Voltage Networks
Introduction
Feature
Therasoft is an economical energy management software, which can be redesigned as a customize software of the customer project requirements. The continuous increase of energy costs together with the possibility to select the most suitable contract among different energy providers make more and more convenient a supervisory system able to ensure a continuous monitoring of power consumption and energy costs of low and medium voltage networks. Thanks to Therasoft software, it has been possible to develop many supervisory applications able to provide both the continuous monitoring of the electrical network and the possibility to increase the overall efficiency. Therasoft includes a series of internal objects especially designed to display electrical schemes and cabinets, to monitor power consumption, to calculate energy costs using both real or simulated calendars with different fares according to date and time. Display of electrical schemes with animated switches and lines changing colour according to current path allow highlighting of energy flows, quick spotting of abnormal operation and prevention of possible power overflow. Monitoring of power consumption and energy costs of single user lines and of the overall network in the form of daily, monthly and yearly bar charts provide an ideal report for analysis and optimization of the electrical network; the possibility to program the yearly calendar with different fares according to date and time is an essential tool to prepare a budget plan and select the contract more suitable for anyone’s requirements.
TCP/IP Client Server support MODBUS RTU communication Multi-pages Monitoring system Reports accessible from Excel, Access, etc. Graphics & Chart Monitoring On-line Energy Electronic Billing GSM Network (optional on requested) Status Alarm, Device & Status Historical Alarm & Change User
Special applications as on customers request: Energy Max-demand Limiter Automatic Meter Reading Remote Energy Billing system
Application Therasoft suitable for any application for remote supervisory as small meter network or for large s meters network application as for : Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial
Therasoft Eco
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
37
Minimum Configuration: Model
THERASOFT Eco
Platform
Personal Computer (PC)
Operating System
Window 2000 & XP Compatible
CPU Processor
Pentium IV or Higher
Memory RAM
128 MB RAM or Higher
Hard disk Drive
40 GByte
Communication Port
RS232, RS485 or Ethernet Port
Energy Network Application Example Serial Converter
USB/RS232/Ethernet to RS485
Modbus 2-Wire RS485 Net
TPM230D
TEMO45-D
TEMO35-D
TEMO35-D
PC (Therasoft Eco)
TEMO35-D other Modbus device
Tmex-306/256
Tmex-16DI
Pulse Concentrator Expandable
Pulse Concentrator
Use possibility: TEMO31-D
TEMO11-C
Pulse Modbus Net
TEMO15-D
TEMO21-C
Type / Order No.
Version (V)
Capacity (Point)
Descript ion
TSOFT- ECO256 TSOFT- ECOZXX
Standard Customize
256 — 512 On Request
Eco Energy Management
TEMO41-C
Ordering code
On request ( OEM )
* if you need different applications or as your specifications required, please advisory our sales
Associate Product
TEMO35 Energy Meter
TEMO45 Energy Meter
TEMO65 Multifunction Meter
TIMEX16 Data Concentrator
TIMEX 306-256 Data Concentrator
TEMO65 Power Monitor
®
thera
Power & Electricity Meters
Page Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
38
thera
®
Power & Electricity Meter
TMEX – 16DIP Series Pulse Data Concentrator 16 Channel With Modbus RTU Protocol RS485/2-wire Communication
Introductions
Features
These TMEX-16DIP Series are used to interface energy counters (both single-phase and three phase) provided with pulses output, with PC's, PLC's and acquisitions systems using a serial RS485 interface and ModBus RTU Protocol. It is therefore possible to setup a telemetering system composed of up to 128 Device (connected between them with a simple twisted pair wire of maximum length 1200 M). Each one of them to receive the counting pulses of up to 16 maximum of energy counters. By this system it is possible to obtain the energy count of each counter, using only once RS485 interface, and without the need of as many digitals inputs as the number of the existing energy counters. To leap the transmitted values equal to those actually displayed on the counters, or to perform partial energy counting, the concentrators counting registers can be preset to desired value or reset to zero, In addition, the registers are saved approx every time in a nonvolatile memory, in order to prevent data loses in case of power supply failure.
Compact & Small Size! DIN Rail Mounting Easy Modbus RTU Addressable up to 128 Device Address Up to 16 Pulse Input per device Easy installation Light Weight & Good reliability
Application The pulse input can be collect from energy meter , water meter or gas meters, as for application below
General Functions
Modern office/Commercial
A new line of Modbus based Data Concentrator modules for data acquisition and other applications are available now. These modules offer good realibility, low cost solution for distributed pulse inputs applications, They are portable, easy integrated with existing Modbus network, and simple to use for end users. Various types of module are available for different kinds of requirements. All modules have LED indications for visualization of Input status (Digital) and fault diagnostic analisys some models with high isolation among inputs are also available for special applications. With Modbus RTU protocol these data concentrator modules configured as slaves will be easy to communicate with Modbus master such as BAS/SCADA/PLC/HMI. The Central modules have 2 wire RS485 interface with RTU protocol.
Shopping Center (Mall) Multi Tenant Apartment Factory & Industrial House/Residential rent
Installation note Convenient installation for any application as stand alone data concentrator or for any divice with Modbus-RTU RS485 network application:
To other Modbus Device
AMR Software & Billing (Remote PC)
Modbus RTU Net, RS485/2-wire Serial Converter
USB/RS232/ Ethernet to RS485
TMEX-16DIP 5 1 0
M E T
TMEX 16 Module
Pulse Output Meter
5 1 0 M E T
TMEX 16 Module
Page Pulse Output Meter
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
39
Technical Specification: Model
TMEX-16DIP
Power Supply
12 ~ 24 Vdc
Pulse Digital Input
Central Module
•
Input Points
16 Input
•
Input Voltage Range
12~24 Vdc
•
Input Current per Input
5mA @12Vdc and 11mA @24Vdc
Counters register
Internal Memory
•
Inputs max
16 points Maximum
•
Resolution
32 Bits
•
frequency
1 KHz (max)
•
Pulse Width
500 us (min)
Temperature •
Operating Temperature
0oC ~ 55oC
•
Storage Temperature
-20oC ~ 85oC
Terminal Connectors type
Screw Type Terminal
•
Logic Power and Com.
4 Pin screw type terminal on bottom side of unit
•
Inputs terminal & Comm.
18 Pin screw type terminal on front
Communication Port
Address able Slave 0 ~ 127 device (user settable)
•
Protocol Network
Modbus RTU - RS485/2-Wire
•
Data Communication
P:None, Data:8, Stop-bit:1
•
Baud Rate (bps)
2400,4800,9600,19200 & 38400 Default : 9600 bps
Status Indicator
Red LED for Power, TX/RX–Rs485 & Pulse Input
Dimensions (W x H x D) mm
22.6 x 109.0 x 97.5 mm
Overall Dimension
Installation
Indicator Pulse Input Contact from meters
DIP Switch for slave Device Addressable
Meter Conenction Sample +12~24Vdc PS
Pulse(+)
TEMO15 kWh
Pulse(-)
To Input Module
Ordering code Type / Order No. TMEX-16DIP
®
thera
Voltage (V) 12~24 VDC
Pulse Input (point ) 16 x DI 12~24Vdc
Module Descript ion
16 Pulse Input Module
* You can select to configure the concentrator address device from 0 up to 127 slave as per your required
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
40
thera
®
Power & Electricity Meter
TMEX – 16DI Series Expandable Pulse Data Concentrator With Modbus RTU Protocol RS485/2-wire Communication Introductions
Features
These TMEX-16DI Series are used to interface energy counters (both single-phase and three phase) provided with pulses output, with PC's, PLC's and acquisitions systems using a serial RS485 interface and ModBus RTU Protocol. It is therefore possible to setup a telemetering system composed of up to 31 Device (connected between them with a simple twisted pair wire of maximum length 1200 M). Each one of them to receive the counting pulses of up to 78 maximum of energy counters. By this system it is possible to obtain the energy count of each counter, using only once RS485 interface, and without the need of as many digitals inputs as the number of the existing energy counters. To leap the transmitted values equal to those actually displayed on the counters, or to perform partial energy counting, the concentrators counting registers can be preset to desired value or reset to zero, In addition, the registers are saved approx every time in a nonvolatile memory, in order to prevent data loses in case of power supply failure.
Compact & Expandable ! DIN Rail & Wall Mounting type Wide Range Voltage Input Up to 78 Pulse Input per device Easy installation Modbus RTU Protocol (32 slave) Included Real time Clock and Double tariff function (optional) Internal pulse divider Light Weight & Good reliability
General Functions A new line of Modbus based Data Concentrator modules for data acquisition and other applications are available now. These modules offer good realibility, low cost solution for distributed pulse inputs applications, They are portable, easy integrated with existing Modbus network, and simple to use for end users. Various types of module are available for different kinds of requirements. All modules have LED indications for visualization of Input status (Digital) and fault diagnostic analisys some models with high isolation among inputs are also available for special applications. With Modbus RTU protocol these data concentrator modules configured as slaves will be easy to communicate with Modbus master such as PC/ SCADA/PLC/HMI. The Central modules have 2 wire RS485 interface with RTU protocol.
Application Modern office/Commercial Shopping Center (Mall) Multi Tenant Apartment Factory & Industrial House/Residential rent
Installation note Convenient installation for any application as stand alone data concentrator or for any divice with Modbus-RTU RS485 network application:
AMR Software & Billing (Remote PC)
Modbus RTU Net, R S485/2-wire TMEX Module
TMEX Module
TMEX Module
Serial Converter
USB/RS232/ Ethernet to RS485
TMEX-16DI 5 1 0
M E T
5 1 0
M E T
5 1 0
M E T
Page
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
41
Technical Specification: Model
TMEX-16DI-C306
TMEX-16DI-E321
TMEX-16DI-M321
Power Supply
85 ~ 265 Vac / 50 Hz
Via internal bus
Via internal bus
Pulse Digital Input
Central Module
Expand Module
Expand Module
•
Input Points
14 (Expandable up to 78)
8
16
•
Input Voltage Range
15~30 Vdc
15~30 Vdc
15~30 Vdc
•
Input Current per Input
4.1mA at 24 Vdc
4.1 mA at 24 Vdc
4.1 mA at 24 Vdc
Internal Memory
Internal Memory
Internal Memory
Counters register •
Inputs max
78 points Maximum
8
16
•
Resolution
32 Bits
32 Bits
32 Bits
•
frequency
1 KHz (max)
1 KHz (max)
1 KHz (max)
•
Pulse Width
5 ms (min)
5 ms (min)
5 ms (min)
Temperature •
Operating Temperature
0oC ~ 55oC
0oC ~ 55oC
0oC ~ 55oC
•
Storage Temperature
-20oC ~ 85oC
-20oC ~ 85oC
-20oC ~ 85oC
Snap on Cable
Snap on Cable
Snap on Cable
Terminal Connectors type •
Logic Power and Com.
2+ 1(gnd) AC, 2 - RS485
-
-
•
Inputs terminal & Comm.
14 + 2 point Common.
8 + 2 point Common
16 + 2 common
Slave address 0 ~ 31 device
-
-
Communication Port •
Protocol Network (port-1)
Modbus RTU - RS485/2w
-
-
•
Data Communication
P:None, Data:8, Stop-bit:1
-
-
•
Baud Rate (bps)
2400,4800,9600,19200 & 38400 Default : 9600 bps
-
-
Status Indicator
Green LED
Green LED
Green LED
Dimensions (W x H x D) mm
125 x 114 x 70 mm
50 x 114 x 70 mm
75 x 114 x 70 mm
Overall Dimension &
Installation
RS485-2Wire Modbus
+15~30Vdc PS
Pulse(+)
TEMO15 kWh
Ordering code Type / Order No.
Pulse(-)
To Input Module
®
thera
TMEX-16DI-C306 TMEX-16DI-E321 TMEX-16DI-M321
Voltage (V)
Pulse Input (point )
Module Descript ion
230 VDC 24 VDC 24VDC
14 x DI 12~24Vdc 8 x DI 12~24Vdc 16 x DI 12~24Vdc
Central Module Expand Module Expand Module
* You can select to configure the concentrator point from 14 point up to 78 point per slave as per your required
Power & Electricity Meters
Page
Catalog thera , 01/2009 Copyright © by thera 01/2009, Subject to change without prior notice
42
thera
®
Power & Electricity Meter
TPM230-D Series
New
LCD-Multifunction Network Power Monitor Build-in MODBUS RTU Communication Protocol Applications
Features
TPM230-D is a multifunctional network electrical instrument, is specifically designed and made for thee electrical monitoring requirement of power distribution system. It is with high-precision measurement all of the common electrical parameters including of three-phase voltage, three-phase current, active power, reactive power, frequency, power factor and four-quadrant energy etc; Long-life LCD display the instrument measuring parameters and operation information of network system; Rs485 communication interface, applying MODBUS RTU communication protocol; with four programmable keys on the instrument panel, convenient switch, programmable setting of instrument parameter switch great flexibility. Many kinds of extended function modules for choosing: fourchannel and a log quantity(0-20mA/4-20mA(optional) output can realize the transmitting output function of electrical quantity; four-channel switching value input and four-channel switching value output to realize the local or long-range switch signal monitoring and control output function (function of remote signaling ”and“ remote control”). The instrument can directly replace conventional power transmitter, measuring indicating instrument, electric energy measuring instrument and the related auxiliary unit. With modular structural design, user scan choose the most economical functional configuration according to the actual requirement, which is highly cost-effective.
Build-in MODBUS RTU Protocol RS485 Port. Wide rage current measurement Four-Channel Digital Input Two-Channel Energy Pulse Out Easy installation Compact module 96x96 Square Light Weight & Good reliability 12 pages Parameters Display of 3I, 3V, 3U, PF, F, P, S, ± ∑kWh and ±∑kQh, I/O Status, Total : kW, Kvar, KVA.
It is widely used in occasions of energy management systems, supply and distribution network automation, district power control and complete sets of switchgear. It has the advantages of convenient installment and maintenance, sample wiring, small quantity, programmable input parameters and capable of the network with different PLC, industry control computer communications software. Convenient installation for any application as stand alone meter or for any meters with MODBUS RTU RS485 network application: Power Distribution & transmission Factory & Industrial Plant
Applications Network other Modbus device
TPM230
Serial Converter
USB/RS232/Ethernet
TPM230-D
2-Wire RS485 Net
TPM230
TPM230
Page
PC (Modbus Master)
43 Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice