320D/320D L HYDRAULIC EXCAVATORS
All business.
320D 320DL Hydraulic Excavator Configuration Options
AEXQ0187 (LACD) | ©2007 Caterpillar | All Rights Reserved | Printed in USA CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. Materials and specif ications are subject to change without notice. Featured materials in photos may include additional equipment. See your Cat Dealer f or available options.
UNDERCARRIAGE/UPPER FRAME OPTIONS
Guard—Track Guiding Sprocket End • Center guard removed • For standard and long undercarriages
Guard—Track Guiding • Two-piece additional, full length • Sprocket-end and idler-end track guards • For standard and long undercarriages
Heavy-Duty Bottomguarding Guard 6 mm (0.24 in) heavy-duty for the underside of the upper frame
TRACK OPTIONS 320D
600 mm (24") Triple Grouser 700 mm (28") Triple Grouser 800 mm (32") Triple Grouser
320D L 600 mm (24") Double or Triple Grouser 700 mm (28") Double or Triple Grouser 800 mm (32") Triple Grouser
UNDERCARRIAG
E OPTIONS
Standard Track Gauge – 2200 mm (7'3") Track Length – 4075 mm (13'4")
Long Track Gauge – 2380 mm (7'10") Track Length – 4455 mm (14'7")
Swivel Guard
Track Motor Guards
AUXILIARY HYDRAULICS
FACTORY-INSTALLED
FIELD-INSTALLED KITS
Tool Control System Two Options Available: I) High-pressure combined circuit that is capable of running either single-function or double-function tools, one or two pumps. Ideal for hammers, thumbs, compactors, non-rotating grapples or shears. II) Control system that includes auxiliary (third) pump, which allows for medium pressure for tools that require medium pressure (rotate); programmable modulation feature; define parameters for “squeeze” function. Ideal for hammers, thumbs, compactors, rotating shears or grapples.
Boom and Stick Lines Hydraulic Tool Control System Presets for up to 10 hydraulic tools
Thumb Stick Lines also available
Both options include the following functionality: • Pressures and flows can be set through the monitor • Up to 10 work tools can be stored in the monitor • Hour accumulation can be tracked for each preprogrammed tool
Single-function Two-pump flow Hammer Circuit
Tool Control Kits • Single- and double-function flow • One- or two-pump flow in single-function and double-function settings • Flow control and pressure settings from cab • Joystick control on-off • Offered with and without medium pressure (rotate) • Ideal for demolition tools • Great for rental fleets
• Flow control settings from cab • Ideal for hammers and compactors Thumb / Double-function Kits • One-pump flow • Hydraulic bi-direction flow • Foot- and joystick-control options • Ideal for thumbs and tilt buckets
(only available as field-installed kit) Thumb Package Double-function One-pump flow Hydraulic bi-direction flow Ideal for thumbs or tilt buckets Includes: • Thumb circuit • Foot-switch control or joystick-switch control (non-modulating)
Kits
Hammer / Single-function Kits • Two-pump flow • Hydraulic flow in one direction • Reduced back-pressure to maximize tool performance • Foot control on-off
Hammer Package
Hydraulic flow in one direction Ideal for hammers or compactors Includes: • Hammer circuit • Foot-pedal control
• High-pressure lines • Sized to handle full flow • Connect for jumper lines same as factory
Medium Pressure Kit • Stand-alone • Ideal for tools that require only medium-pressure flow
Thumb Circuit
Conversion Kits • D-Series • Ability to upgrade either single- or doublefunction auxiliary hydraulics to Combined Hydraulics functionality
Field-Installed Kits available from Cat Work Tools 1-800-255-2372
CAT WORK TOOLS SHEARS
HAMMERS
P U LV ER I ZER S
P115 Max. jaw opening Jawdepth Maximum force Tip Throat Weight, with bracket Length
H12 0C
S320 (stick mounted) Jaw opening 390 mm / 15.4" Jawdepth 440mm/17.3" Maximum force Primary blade cen ter 1553 kN / 175 Sh Ton Throat 3340kN/375ShTon Weight 2190kg/4,830lb Length 3044mm/119.8" Rotation 360°( continuous) H120C s Weight Impactrate CIMA Tooldiameter Energy class Operating pressure
1300kg/2,867lb 350-620 2884J/2,127ft-lb 116m m/ 4.6" 4067 J / 3,000 ft-lb 140 bar / 2,031 psi
H130C s Weight Impactrate CIMA Tooldiameter Energy class Operating pressure
1700kg/3,749lb 320–600 3740J/2,758ft-lb 130m m/ 5.1" 4745 J / 3,500 ft-lb 140 bar / 2,031 psi
GRAP PLES
THUMBS Cat® Thumbs are the perfect complement to a Cat Bucket. Like the thumb and fingers on a human hand, a bucket with a thumb can grasp oddly shaped items and loose material, while still folding out of the way for normal loading. Thumbs are ideal for use on construction, forestry, demolition and land-clearing jobs.
800 mm / 31.5" 660mm/26.0" 375kN/42st 850kN/96st 1950 kg / 4,300 lb 3115mm/122.6"
G120B Capacity† Weight Jawopening Upper-tine width Lower-tine width Minimum opening
2.2 m3 / 2.9 yds3 1523kg/3,350lb 2687mm/ 105.8" 617 mm / 24.3" 1,031 mm / 40.6" 199 mm / 7.8"
Full-Rotation T humb Cat Thumbs feature a patented linkage, allowing them to follow the full range of bucket motion, up to 208°. A single thumb can work with a wide r ange of Cat Buckets.
VIBRATORY PLATE COMPACTORS
S115 Jaw opening Jawdepth Maximum force Primary blade cen ter Throat Weight, with bracket Length
R O S S E C O R P I T L U M
CVP110 Impulse force Base plate pressure Cycles/min Compaction area Width
420 mm / 16.5" 460mm/18.1"
110kN/2 4,669lb 106.4 kPa / 15. 4 psi 2200 1.03 m 2 / 11.1 ft2 864mm/34"
1700 kN / 190 Sh Ton 3250kN/365ShTon 1600 kg / 3,530 lb 2600mm/102.4"
MP20 S with housing
*Total weight including housing, jaw and bracket.
T G-CB Capacity† Weight Maximum op ening Upper jaw width Lower jaw width
3.8 m3 / 5.0 yd 3 2,077kg/4,569lb 3,129 mm / 1 23" 1196 mm / 47" 1545 mm / 61"
† Rated according to pending SAE Standard J2754
Primary Pulverizer Jaw opening Jawdepth Maximum force Tip Primary blade cen ter *Weight Length
Jaw – MP20 PP 800 mm / 31.5" 800mm/31.5" 950kN/107ShTon 2750 kN / 309 Sh To n 2900kg/6,390lb 2325mm/91.5"
Crusher Jaw – MP20 CR Jaw opening 850 mm / 33.5" Jawdepth 770mm/30.3" Maximum force Tip 950kN/107ShTon Primary blade cent er 2900 kN / 326 Sh Ton *Weight 2660kg/5,865lb Length 2350mm/92.5"
Concrete Cutter Jaw – MP20 CC Jaw opening 820 mm / 32.2" Jawdepth 790mm/31.1" Maximum force Tip 950kN/107ShTon Primary blade cen ter 3000 kN / 337 Sh To n *Weight 2660kg/5,864lb Length 2400mm/94.5"
Secondary Pulverizer Jaw – MP20 PS Jaw opening 890 mm / 35.0" Jawdepth 800mm/31.5" Maximum force Tip 1000kN/112ShTon Primary blade cen ter 3000 kN / 337 Sh Ton *Weight 2770kg/6,105lb Length 2450mm/96.5"
Stiff-Link T humb Featuring a rigid link and a multiple-position bracket, the Cat Stiff-Link Thumb works with the bucket to easily pick up, handle and load irregular or loose materials.
Shear Jaw – MP20 S Jaw opening 420 mm/ 16.5" Jawdepth 580mm/22.8" Maximum force Tip 1200kN/135ShTon Primary blade cen ter 5800 kN / 652 Sh Ton *Weight 2570kg/5,665lb Length 2250mm/88.6"
BOOMS & STICKS
BUCKETS H e a v yDu t y
H e a v y - DR utoyc k
H e a v y - Dut yPo we r
Di t c hC le a n in g
H ea v y - Du t yQ u a r ry
PIN-ON
Di tCclhea n in g
H e aDvuyt y
DEDICATED COUPLER
LONG REACH ARRANGEMENT (Custom Offering)
S T E K C U B Y L I M A F ’ B ‘
Reach Boom / Heavy-Duty Reach Boom 5.68 m / 18'7" Maximum reach 10.76 m / 35'4" Maximum digging depth 7.66 m / 25'2"
Long Reach Boom, Stick and Bucket Linkage Maximum reach up to 15.6 m / 51'2" Maximum digging depth up to 11.7 m / 38'6"
‘B’ Family Bucket Linkage
Reach Stick R3.9B1 / 12'8"
610mm/24" .54m 3 /.70 yd 3 K90adapt ers 3tips
610mm/24" .54m 3 /.70 yd3 K90adapters 3tips
920mm/36" .84m 3 /1.10 yd3 K90adapt ers 5tips
770mm/30" .77m 3 /1.00 yd3 K90adapt ers 4tips
770mm/30" .77m 3 /1.00 yd3 K90adapters 4tips
1070mm/42" .99m 3 /1.30 yd3 K90adapt ers 5tips
920mm/36" .84m 3 /1.10 yd3 K90adapt ers 5tips
920mm/36" .84m 3 /1.10 yd3 K90adapters 5tips
1220mm/48" 1.15m 3 /1.5 yd3 K90adapt ers 6tips
1070mm/42" 1.07m 3 /1.40 yd 3 K90adapt ers 5tips
1070mm/42" 1.07m 3 /1.40 yd3 K90adapters 5tips
1530mm/60" .99m 3 /1.3 yd3
1530mm/60" .99m 3 /1.3 yd 3
1830mm/72" 1.24m 3 /1.62 yd 3
920mm/36" .76m 3 /1.0 yd3 K90adapters 5tips 1070mm/42" 1.07m 3 /1.4 yd 3 K90adapters 5tips 1220mm/48" 1.22m 3 /1.6 yd 3 K90adapters 6tips
1220mm/48" 1.22m 3 /1.6 yd3 K90adapt ers 6tips
Reach Stick / Heavy-Duty Reach Stick R2.9B1 / 9'7"
Boom Cylinders (included)
Counterweight (included) 4830 kg / 10,648 lb
Long Reach Buckets 1140 mm / 45" .45 m3 / .58 yd3 1220 mm / 48" .6 m3 / .78 yd3
‘CB’ Family Bucket Linkage
Mass Stick M2.4CB2 2.4 m / 7'10"
1380mm/54" 1.38m 3 /1.8 yd 3 K90adapters 6tips
1380mm/54" 1.38m 3 /1.8 yd3 K90adapt ers 7tips
Reach Stick / Heavy-Duty Reach Stick R2.5B1 / 8'2"
Mass Boom 5.3 m / 17'5" Maximum reach 8.96 m / 29'5" Maximum digging depth 5.89 m / 19'4"
690mm/27" .57m 3 /.75 yd3 K90adapters 3tips
S T E K C U B Y L I M A F ’ B ‘C
610mm/24" .53m 3 /.69 yd 3 K100adapters 3tips
770mm/30" .73m 3 /.95 yd3 K100adapters 3tips
1070mm/42" 1.12m 3 /1.46 yd 3 K100adapters 5tips
770mm/30" .73m 3 /.95 yd 3 K100adapters 3tips
920mm/36" .93m 3 /1.22 yd3 K100adapters 4tips
1220mm/48" 1.33m 3 /1.74 yd 3 K100adapters 5tips
920mm/36" .93m 3 /1.22 yd3 K100adapters 4tips
1070mm/42" 1.14m 3 /1.49 yd3 K100adapters 5tips
1380mm/54" 1.53m 3 /2.0 yd3 K100adapters 6tips
1530mm/60" 1.25m 3 /1.63 yd 3 1830mm/72" 1.53m 3 /2.00 yd 3
1220mm/48" 1.24m 3 /1.6 yd 3 K100adapters 5tips 1380mm/54" 1.57m 3 /2.05 yd3 K100adapters 6tips
1830mm/72" 1.25m 3 /1.63 yd3 1830mm/72" 1.91m 3 /2.50 yd3
762mm/30" .74m 3 /.97 yd3 K110adapters3 tips 914mm/36" .95m 3 /1.24 yd 3 K110adapters4 tips 920mm/36" .93m 3 /1.22 yd 3 K100adapters4 tips
1070mm/42" 1.14m 3 /1.49 yd 3 K100adapters 5tips
1067mm/42" 1.18m 3 /1.54 yd3 K110adapters4 tips
1220mm/48" 1.35m 3 /1.77 yd 3 K100adapters 5tips
1070mm/42" 1.14m 3 /1.49 yd3 K100adapters5 tips
1380mm/54" 1.57m 3 /2.05 yd 3 K100adapters 6tips
1219mm/48" 1.41m 3 /1.84 yd3 K110adapters5 tips
1530mm/60" 1.78m 3 /2.33 yd 3
1220mm/48" 1.35m 3 /1.77 yd3
K100adapters 7tips
K100adapters5 tips 1372mm/54" 1.64m 3 /2.15 yd3 K110adapters5 tips 1380mm/54" 1.57m 3 /2.05 yd3 K100adapters6 tips 1524mm/60" 1.87m 3 /2.45 yd3 K110adapters6 tips
BUCKETS TIPS FOR K80/K90/K100 ADAPTERS
Penetration
ExtD rauty
Penetration Plus
Spike
General Duty
Double Spike
OTHER B UCKET ATT ACHMENTS
Heavy-Duty Sidecutter
General-Purpose Sidecutter
Sidebar Protector
Dedicated Wedgelock Coupler
Pin Grabber Coupler
Works with ‘B’ Family Dedicated Coupler Buckets Weight: 272 kg / 600 lb
Works with ‘B’ Family Pin-on Buckets Weight, with pins 365 kg / 805 lb Pin diameters Pin spread minimum Pin spread maximum Face spread minimum Face spread maximum Face spread maximum (withshims)
80 mm / 3.15" and 80 mm 3.15" 430 mm / 16.9" 520 mm / 20.5" 307 mm / 12.1" 327 mm / 12.9" 367mm/14.4"
CAB OPTIONS
ADDITIONAL OPTIONS
Seat Options
T empered Windows
Machine Security System
Starting Aid, Cold Weather
12V Power Supply
Mechanical suspension seat provides great comfort and adjustability.
Includes Vandalism Guard bosses.
Manage machine access and deter theft
For temperat ures above -30° C (-22° F) Includes: Two additional batteries, high-capacity starter motor and heavy-duty cable
Power source for laptop or cell phone charger
Product Link 121 / Product Link 321 Uses GPS to track machine location, operating hours, machine health and maintenance information
High Ambient Cooling (standard)
Window Guard Wire-mesh guard for hammer work. Cannot be used with Vandalism Guard or Falling Objects Guard.
In-cab Indicator For water separator
Vandalism Guard For cab door and windshield only. For use on polycarbonate cabbe with andwith without Rain Protector. Cannot used Falling Objects Guard or Window Guard.
Sun Visor
Falling Objects Guard Recommended whenever there is a possibility of falling objects.
Lower Windshield Wiper
Cab Working Lights Straight T ravel Pedal
NOTE:Some options in this brochure may not be available in your area. Please contact your Cat Dealer for more details.
For conditi ons up to 52°C / 125° F; controlled by a viscous clutch demand fan
Rubber Bumper Guards Protects upper frame from side impacts
Jump Start T erminals
T ravel Alarm (standard)
Provides standard connection terminal to connect jump start lines to start other equipment (lines not included)
Hand Control Pattern Changer
Rain Protector (Cab Front)
Switches between ISO and SAE joystick controls
Durable cover over the front windshield to protect from excessive rain
Boom Right Side Light
Electric Refueling Pump Ground level accessible fast fill fuel system capable of 100 l/min (26 gal/min) fill rate with automatic shut off