2013-Huawei Certification-Exam Outline (Partner) V2 2

Huawei Certification Exam Outline (Partner)

Huawei Certification Exam Outline (For Partner)

HUAWEI Learning Service 2013

COMMERCIAL IN CONFIDENCE

1


Contents 1

Fixed Network ............................................................................................................................................ 4

1.1 Datacom Technology Certification Exam (Carrier) Outline ......................................................................... 4 1.1.1 Introduction of Datacom Technology Certification Exam .................................................................. 4 1.1.2 Huawei Certified Datacom Associate － Huawei Networking Technology and Device (HCDA-HNTD) Exam Outline ..................................................................................................................... 5 1.1.3 Huawei Certified Datacom Professional－Building Carrier Access Network (HCDP-BCAN) Exam Outline

7

1.1.4 Huawei Certified Datacom Professional - Building Carrier Routing Network (HCDP-BCRN) Exam Outline

9

1.1.5 Huawei Certified Datacom Professional-Building IP Telecom Network (HCDP-BITN) Exam Outline12 1.1.6 Huawei Certified Internetwork Expert Improve Carrier Network Performance (HCIE Carrier) Exam Outline

14

1.2 Access Network Exam Outline ................................................................................................................. 18 1.2.1 Introduction of Access Network Exam ........................................................................................... 18 1.2.2 Huawei Certified Network Associate- Access Network Exam Outline ............................................ 18 1.2.3 Huawei Certified Network Professional- Access Network Exam Outline........................................ 20 1.3 Optical Network Exam Outline .................................................................................................................. 23 1.3.1 Introduction of Optical Network Exam ............................................................................................ 23 1.3.2 Huawei Certified Network Associate-Optical Network Exam Outline ............................................. 23 1.3.3 Huawei Certified Network Professional-Optical Network Exam Outline ......................................... 25 1.4 Microwave Product Exam Outline ............................................................................................................ 28 1.4.1 Introduction of Microwave Product Exam ...................................................................................... 28 1.4.2 Huawei Certified Network Associate-Microwave Product Exam Outline ........................................ 28 1.4.3 Huawei Certified Network Professional-Microwave Product Exam Outline .................................... 29 2

Core Network ........................................................................................................................................... 32

2.1 Mobile Soft Switch Exam Outline ............................................................................................................. 32 2.1.1 Introduction of Mobile Soft Switch Exam Outline ........................................................................... 32 2.1.2 Huawei Certified Network Associate- Mobile Soft Switch Exam Outline ........................................ 32 2.1.3 Huawei Certified Network Professional - Mobile Soft Switch Exam Outline ................................... 34 2.2 NGN Exam Outline ................................................................................................................................... 36 2.2.1 Introduction of NGN Exam Outline................................................................................................. 36 2.2.2 Huawei Certified Network Associate-NGN Exam Outline .............................................................. 36 2.2.3 Huawei Certified Network Professional-NGN Exam Outline .......................................................... 38 2.3 MGW&SBC Exam Outline ........................................................................................................................ 41 2.3.1 Introduction of MGW&SBC Exam Outline ...................................................................................... 41 2.3.2 Huawei Certified Network Associate- MGW&SBC Exam Outline................................................... 41 2.4 USC Exam Outline ................................................................................................................................... 43 2.4.1 Introduction of USC Exam Outline ................................................................................................. 43 2.4.2 Huawei Certified Network Associate-USC Exam Outline ............................................................... 43 2.4.3 Huawei Certified Network Professional -USC Exam Outline ......................................................... 46 2.5 SG Exam Outline ...................................................................................................................................... 49 2.5.1 Introduction of SG Exam Outline ................................................................................................... 49 2.5.2 Huawei Certified Network Associate-SG Exam Outline ................................................................. 49

1

Huawei Certification Exam Outline (Partner) 2.5.3 Huawei Certified Network Professional-SG Exam Outline ............................................................. 50 3

Wireless.................................................................................................................................................... 52

3.1 GSM Exam Outline ................................................................................................................................... 52 3.1.1 Introduction of GSM Exam Outline ................................................................................................ 52 3.1.2 Huawei Certified Network Associate-GSM Exam Outline .............................................................. 52 3.1.3 Huawei Certified Network Professional-GSM Exam Outline .......................................................... 54 3.2 WCDMA Exam Outline ............................................................................................................................. 57 3.2.1 Introduction of WCDMA Exam Outline ........................................................................................... 57 3.2.2 Huawei Certified Network Associate-WCDMA Exam Outline ......................................................... 57 3.2.3 Huawei Certified Network Professional-WCDMA Exam Outline .................................................... 59 3.3 CDMA Exam Outline................................................................................................................................. 62 3.3.1 Introduction of CDMA Exam Outline .............................................................................................. 62 3.3.2 Huawei Certified Network Associate-CDMA Exam Outline ............................................................ 62 3.3.3 Huawei Certified Network Professional-CDMA Exam Outline ........................................................ 64 3.4 Wimax Exam Outline ................................................................................................................................ 68 3.4.1 Introduction of Wimax Exam Outline .............................................................................................. 68 3.4.2 Huawei Certified Network Professional-Wimax Exam Outline ....................................................... 68 3.5 LTE Certification Exam Outline ................................................................................................................. 70 3.5.1 Introduction of LTE Certification ..................................................................................................... 70 3.5.2 Huawei Certified Network Associate — LTE (HCNA-LTE) Exam Outline ....................................... 70 3.5.3 Huawei Certified Network Professional — LTE (HCNP-LTE) Exam Outline .................................. 72 3.5.4 Huawei Certified Network Professional — EPC (HCNP-EPC) Exam Outline ................................ 76 4

RNP&RNO ............................................................................................................................................... 79

4.1 GSM RNP&RNO Exam Outline ................................................................................................................ 79 4.1.1 Introduction of GSM RNP&RNO Exam Outline.............................................................................. 79 4.1.2 Huawei Certified Network Associate-GSM RNP&RNO Exam Outline ........................................... 79 4.1.3 Huawei Certified Network Professional-GSM RNP&RNO Exam Outline ....................................... 80 4.2 WCDMA RNP&RNO Exam Outline .......................................................................................................... 83 4.2.1 Introduction of WCDMA RNP&RNO Exam Outline ........................................................................ 83 4.2.2 Huawei Certified Network Associate-WCDMA RNP&RNO Exam Outline ...................................... 83 4.2.3 Huawei Certified Network Professional-WCDMA RNP&RNO Exam Outline ................................. 84 4.3 CDMA RNP&RNO Exam Outline .............................................................................................................. 87 4.3.1 Introduction of CDMA RNP&RNO Exam Outline ........................................................................... 87 4.3.2 Huawei Certified Network Associate-CDMA RNP&RNO Exam Outline ......................................... 87 4.3.3 Huawei Certified Network Professional-CDMA RNP&RNO Exam Outline ..................................... 88 4.4 Microwave RNP Exam Outline ................................................................................................................. 91 4.4.1 Introduction of RNP Exam Outline ................................................................................................. 91 4.4.2 Huawei Certified Network Associate-Microwave RNP Exam Outline ............................................. 91 4.4.3 Huawei Certified Network Professional-Microwave RNP Exam Outline ........................................ 92 5

Energy&Infrastructure............................................................................................................................... 95

5.1 Site and Power Exam Outline ................................................................................................................... 95 5.1.1 Introduction of Site and Power Exam Outline ................................................................................ 95 5.1.2 Huawei Certified Network Associate-Site and Power Exam Outline .............................................. 95 5.2 Hybrid Power Supply Exam Outline.......................................................................................................... 97 5.2.1 Introduction of Hybrid Power Supply Exam Outline ....................................................................... 97

2

Huawei Certification Exam Outline (Partner) 5.2.2 Huawei Certified Network Associate-Hybrid Power Supply Exam Outline ..................................... 97 6

Cloud ........................................................................................................................................................ 99

6.1 Cloud Computing Certification Exam Outline ........................................................................................... 99 6.1.1 Introduction of Cloud Computing Certification................................................................................ 99 6.1.2 Huawei Certified Network Associate-Huawei Cloud Technologies and Device (HCNA-HCTD) Exam Outline 7

99

Telecom Design and Implementation...................................................................................................... 102

7.1 Telecom Survey and Design Exam Outline ............................................................................................ 102 7.1.1 Introduction of Telecom Survey and Design Exam Outline .......................................................... 102 7.1.2 Huawei Certified Network Associate-Telecom Survey and Design Exam Outline ........................ 102 7.2 Hardware Installation Supervision (excluding RF products) ................................................................... 104 7.2.1 Introduction of Enterprise Communiation Exam Outline .............................................................. 104 7.2.2 Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products)104 7.3 Huawei Certified Network Professional -Hardware Installation Supervision (including RF products) ..... 107 7.3.1 Introduction of Enterprise Communiation Exam Outline .............................................................. 107 7.3.2 Huawei Certified Network Professional-Hardware Installation Supervision (including RF products)107 7.4 Huawei Certified-ODN Design Exam Outline ......................................................................................... 109 7.4.1 ODN Design Certification Exam Introduction ............................................................................... 109 7.4.2 ODN Design Exam Outline .......................................................................................................... 109 7.5 Huawei Certified-ODN Implementation Exam Outline ............................................................................ 111 7.5.1 ODN Implementation Certification Exam Introduction .................................................................. 111 7.5.2 ODN Implementation Exam Outline ............................................................................................. 112 7.6 Huawei Certified-OSP Design Exam Outline .......................................................................................... 114 7.6.1 OSP Design Exam Introduction ................................................................................................... 114 7.6.2 OSP Design Exam Exam Outline ................................................................................................ 114 7.7 Huawei Certified-OSP Implementation Exam Outline............................................................................. 116 7.7.1 OSP Implementation Exam Introduction ...................................................................................... 116 7.7.2 OSP Implementation Exam Outline ............................................................................................. 117 7.8 Huawei Certified-Site Civil Work Implementation Exam Outline ............................................................. 119 7.8.1 Site Civil Work Implementation Exam Introduction ...................................................................... 119 7.8.2 Site Civil Work Implementation Exam Outline.............................................................................. 119 7.9 Huawei Certified-Site Design Exam Outline ........................................................................................... 120 7.9.1 Site Design Certification Exam Introduction ................................................................................. 120 7.9.2 Site Design Exam Outline ............................................................................................................ 121 8

Service Delivery flow and Skill ................................................................................................................ 123

8.1 Maintenance flow and Skill(for MS area Manager and Field Maintenance Leader) ................................ 123 8.1.1 HCNA- Maintenance flow and Skill subcontractor test................................................................. 123 8.1.2 HCNA- Maintenance flow and Skill Exam Outline........................................................................ 123 8.2 Training flow and Skill ............................................................................................................................. 124 8.2.1 HCNA- Maintenance flow and Skill subcontractor test introduction ............................................. 124 8.2.2 HCNA- Maintenance flow and Skill Exam Outline........................................................................ 124

3


1 Fixed Network 1.1 Datacom Technology Certification Exam (Carrier) Outline 1.1.1 Introduction of Datacom Technology Certification Exam Certificate

Huawei Certified Datacom Associate

Exam Name

Exam Duration

HC-211-ENU/HC-031-211-ENU

90 min


HCDP-BCAN (Huawei Certified Datacom Professional －Building Carrier Access Network)

90 min


HCDP-BCRN (Huawei Certified Datacom Professional - Building Carrier Routing Network)

90 min


HCDP-BITN (Huawei Certified Datacom Professional-Building IP Telecom Network)

90 min

HCIE-Carrier

HC-031-161-ENU

HCIE (Huawei Certified Internetwork Expert Improve Carrier Network Performance ) Exam

90 min

HCIE Carrier Lab Exam

--

Huawei Certified Internetwork Expert Lab Exam

480 minutes

HCDA－ HNTD

HCDP-BCRN

HCDP-BITN

Huawei Certified Internetwork Expert - Carrier

Exam Name HCDA-HNTD (Huawei Certified Datacom Associate － Huawei Networking Technology and Device)

HCDP-BCAN

Huawei Certified Datacom Professional Carrier

Exam Code

Item number 60 multiple-choice questions (single-answer and multiple-answer), true-false questions 60 multiple-choice questions (single-answer and multiple-answer), true-false questions 60 multiple-choice questions (single-answer and multiple-answer), true-false questions 60 multiple-choice questions (single-answer and multiple-answer), true-false questions 60 multiple-choice questions (single-answer and multiple-answer), true-false questions --

Total Score

Pass Score

1000

600

1000

600

1000

600

1000

600

1000

600

--

--

4


1.1.2 Huawei Certified Datacom Associate － Huawei Networking Technology and Device (HCDA-HNTD) Exam Outline 1.1.2.1 Prerequisites No prerequisites.

1.1.2.2 Exam Content Overview The HCDA-HNTD exam covers datacom basics, TCP/IP protocol stack basics, WAN protocol principles such as Frame Relay and PPP and their implementation in Huawei routers, Ethernet technology, STP, and VLAN principles and their implementation in Huawei switches, basic principles of routing protocols such as RIP and OSPF and their implementation in Huawei routers, and network security technologies and their implementation in Huawei firewalls.

1.1.2.3 Exam results valid period This exam result is valid for 3 years.

1.1.2.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods: Certificate

Huawei Certified Datacom Associate

Re-certification Methods To re-certify, pass ONE of the following before the certification expiration date:  Pass any subject of the same level of certification in the field of the local technology  Pass any subject of the high-level certification in the field of the local technology

1.1.2.5 Key Points of Exam IP Network Basics 1. Datacom basics 2. Basic network concepts, IP network architecture, standardization organizations and protocols 3. OSI and TCP/IP protocol models, functions at each layer, and packet encapsulation 4. ARP and RARP principles 5. TCP/UDP principles 6. IPv4 subnetting 7. Principles of common application layer protocols 8. Principles and application of common tools such as Ping, Tracert, FTP, and Telnet

5


LAN Technologies 1. Basic principles of the Ethernet technology and switches 2. Basic principles of VLAN, STP, and VRRP and their implementation in VRP 3. How a small switching network is constructed by using VLAN, STP, and VRRP technologies and Huawei switches WAN Technologies 1. HDLC, PPP, and Frame Relay and their implementation in Huawei products Routing Technologies 1.

Static routing protocol principles, RIP principles, and OSPF principles, and their implementation in VRP

2.

How a small routing network is constructed by using routing technologies and Huawei routers

Network Security 1. Firewall functions, types, and working principles 2. ACL and NAT principles and configuration of ACL and NAT in Huawei firewalls 3. How network security is ensured by using network security technologies and firewalls Product Knowledge 1. VRP features, operations, and maintenance 2. Features of Huawei routers and switches and their implementation in IP networks The exam content provided here serves only as a general guide to candidates. Other contents not mentioned here may also be included in the actual exam.

1.1.2.6 Participating in the Exam The exam is delivered by Pearosn VUE authorized test centers.You can register with the nearest test center to take the exam. To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE : http://www.vue.com/vtclocator/

1.1.2.7 References Huawei Certified Datacom Training Courses — HCDA: Huawei Network Technology and Device (HNTD) Huawei Certified Datacom Training Courses — HCDA: Guide to Experiments on Huawei Network Technology and Device (HNTD) VRP Configuration Guide

6


Huawei product manuals

1.1.2.8 Recommended Training Program BOM

Training Program

Level

Duration

88980225

HCDA-HNTD (Huawei Certified Datacom Associate-Huawei Networking Technologies and Device) Training

II

8

1.1.3 Huawei Certified Datacom Professional－Building Carrier Access Network (HCDP-BCAN) Exam Outline 1.1.3.1

Prerequisites

No prerequisites.

1.1.3.2

Exam Content Overview

The HCDP-BCAN exam covers the Ethernet and Ethernet HA technology, VLAN technology, QinQ technology, STP/RSTP/MSTP technologies, PPP and PPPoE access technologies, AAA technology, Huawei switches, and broadband access servers.

1.1.3.3

Exam results valid period

This exam result is valid for 3 years.

1.1.3.4

Re-certification Methods

Before your certification expires, you should re-certify with the following methods: Certificate Huawei Certified Datacom Professional-Carrier

1.1.3.5


Key Points of Exam

Ethernet Technology 1.

Ethernet evolution process, port auto-negotiation technology, port trunking, port mirroring, working principles of a Layer 2 switch, and working principles of a Layer 3 switch

VLAN 1.

802.1Q encapsulation, implementation of VLAN in Huawei products

2.

Inter-VLAN route and Super VLAN

7


3.

QinQ principles, configuration, and implementation

STP/RSTP/MSTP 1.

STP principles and configuration

2.

RSTP principles and configuration

3.

MSTP principles and configuration

Huawei Switches 1.

Hardware structure and working principles of Huawei switches

2.

VRP software features of Huawei switches

Huawei ME60-X Series Broadband Access Servers 1.

ME60-X series products hardware structure and working principle

2.

ME60-X series products VRP software feature

Basic Access and Authentication Techniques 1.

IPoE, IPoEoVLAN, IPoEoA, and static user access principles and their implementation in Huawei BRAS; Web authentication, fast authentication, and binding authentication principles and their implementation in the MA5200G

2.

PPPoE, PPPoEoVLAN, PPPoEoA, and PPPoA access methods and their implementation in Huawei BRAS

3.

RADIUS principles and its implementation in Huawei BRAS

Ethernet HA technology 1.

Ethernet link aggregation working princple and configuration

2.

Smart link and monitor link working princple and configuration

3.

VRRP working princple and configuration

The exam content provided here serves only as a general guide to candidates. Other contents not mentioned here may also be included in the actual exam.

1.1.3.6

Participating in the Exam

The exam is delivered by Pearosn VUE authorized test centers.You can register with the nearest test center to take the exam. To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE : http://www.vue.com/vtclocator/

1.1.3.7

References

Huawei Certified Datacom Training Courses — HCDP-Carrier IP: Building Carrier Access Network (BCAN) Huawei Certified Datacom Training Courses — HCDP-Carrier IP: Guide to Experiments on

8


Building Carrier Access Network (BCAN) VRP Configuration Guide VRP Troubleshooting VPR Feature Description

1.1.3.8

Recommended Training Program

BOM

Training Program

Level

Duration

III

6

HCDP-BCAN (Huawei Certified Datacom Professional－Building Carrier Access Network) Training.

88980226

1.1.4 Huawei Certified Datacom Professional - Building Carrier Routing Network (HCDP-BCRN) Exam Outline 1.1.4.1 Prerequisites No prerequisites.

1.1.4.2 Exam Content Overview The HCDP-BCRN exam covers IPv4 address planning, RIP, OSPF, IS-IS, and BGP routing protocols, routing and routing control, multicast routing protocols, IPv6 basic protocols, IPv6 routing protocol, and Huawei routers.



Huawei Certified Datacom Professional-Carrier


1.1.4.5 Key Points of Exam IP Basics 1.

IPv4 address planning: classless IP address planning, Classless Inter-Domain Routing (CIDR), and NAT traversal

2.

IPv6 basics: IPv6 packet structure, IPv6 address, ICMPv6 principles, basic neighbor discovery principles, address autoconfiguration, PMTU auto-discovery principles, and IPv6 address basic configuration

9


Routing Basics 1.

Basic principles and configuration of static routing

2.

Basic principles of dynamic routing protocols

RIPs 1.

Principles of distance vector routing protocols

2.

RIP protocol principles, configuration, and implementation, and troubleshooting of common faults

3.

RIPng principles, configuration, and implementation

OSPF Routing Protocols 1.

Basic principles of link state routing protocols

2.

OSPF principles, configuration, and implementation: neighbor and adjacency, protocol packet and LSA, database synchronization, intra-area route calculation, inter-area route calculation, and external route calculation

3.

Principles and configuration of OSPF special areas: stub area, totally stub area, and not-so-stubby area (NSSA)

4.

Basic methods of OSPF fault diagnosis

5.

Basic principles and configuration of OSPFv3

IS-IS Routing Protocols 1.

Basic principles, configuration, and implementation of IS-IS: basic protocol concepts, adjacency, database synchronization, and route calculation

2.

Basic methods of IS-IS fault diagnosis

3.

Basic principles and configuration of IS-ISv6

BGP Routing Protocols 1.

BGP principles: AS, BGP neighbors, route distribution methods, and route advertisement rules

2.

BGP path selection

3.

BGP route aggregation

4.

BGP routing policies: attributes and routings protocols commonly used in BGP

5. Basic principles and configuration of BGP route reflection and AS confederations for BGP 6.

BGP multi-homing

7.

BGP fault diagnosis methods

8.

Basic principles and configuration of MP-BGP for IPv6

Routing Control and Selection 1.

Route filtering by using filtering tools such as ACL, route policy, IP-prefix, and AS-Path

2.

Mutual route import between IP routing protocols and advertisement of default routes

3.

Policy-based route

10


Multicast Protocols 1.

Basic principles and configuration of IGMPv1/v2/v3 and IGMP snooping

2.

Basic principles and configuration of PIM-DM and PIM-SM

NE5000E/5000E-X16 and NE40E-X Series Routers 1.

Hardware structure and working principles of NE routers

2.

VRP software features of NE routers



1.1.4.7 References Huawei Certified Datacom Training Courses — HCDP-Carrier IP: Building Carrier Routing Network (BCRN) Vol. I. Huawei Certified Datacom Training Courses — HCDP-Carrier IP: Building Carrier Routing Network (BCRN) Vol. II. Huawei Certified Datacom Training Courses — HCDP-Carrier IP: Guide to Experiments on Building Carrier Routing Network (BCRN) VRP Configuration Guide VRP Troubleshooting VPR Feature Description


Training Program

Level

Duration

88980227

HCDP-BCRN (Huawei Certified Datacom Professional - Building Carrier Routing Network) Training

III

9

11


1.1.5 Huawei Certified Datacom Professional-Building IP Telecom Network (HCDP-BITN) Exam Outline 1.1.5.1 Prerequisites No prerequisites.

1.1.5.2 Exam Content Overview The HCDP-BITN exam covers common technologies of IPTV, 3G, and NGN IP bearer networks such as MPLS VPN, MPLS TE, QoS, and HA.


1.1.5.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods: Certificate Huawei Certified Datacom Professional-Carrier


1.1.5.5 Key Points of Exam QoS 1.

IP QoS model and differentiated services (DiffServ) model

2.

Basic principles of classification and marking, traffic policing and shaping, congestion management, congestion avoidance, and link efficiency mechanisms and their implementation in NE products

3.

Class-based QoS principles and its implementation in NE products

High Availability (HA) 1.

NSF/NSR/GR principles

2.

Bidirectional Forwarding Detection (BFD) principles

3.

Basic principles of IP reroute, IP FRR, LDP FRR, VPN FRR, and TE FRR

4.

VRRP principles, configuration, and application

MPLS VPN 1.

MPLS principles and implementation: MPLS frame format and encapsulation, MPLS data forwarding process, LDP neighbor discovery and session establishment, LDP label management, and MPLS loop avoidance

2.

Basic principles and implementation of MPLS VPN: single-domain MPLS VPN

12


principles and implementation; application of OSPF in MPLS VPN 3.

MPLS VPN fault diagnosis: troubleshooting roadmap and debugging methods of control plane faults; troubleshooting roadmap and debugging methods of data plane faults

MPLS TE 1.

MPLS TE principles and application: structure of MPLS TE and functions of its four components, MPLS TE attributes, basic applications of MPLS TE, and basic configuration and implementation of MPLS TE



1.1.5.7 References Huawei Certified Datacom Training Courses — HCDP-Carrier IP: Building IP Telecom Network (BITN) Huawei Certified Datacom Training Courses — HCDP-Carrier IP: Guide to Experiments on Building IP Telecom Network (BITN) VRP Configuration Guide VRP Troubleshooting VPR Feature Description


88980228

Training Program

HCDP-BITN (Huawei Certified Datacom Professional-Building IP Telecom Network) Training

Level

Duration

III

7

13


1.1.6 Huawei Certified Internetwork Expert Improve Carrier Network Performance (HCIE Carrier) Exam Outline 1.1.6.1 Prerequisites For those who are ready to get the HCIE Carrier Certification, and become Huawei Certified Network Specialist.

1.1.6.2 Exam Content Overview HCIE Carrier certification includes Ethernet Technologies, VLAN, QinQ, STP/RSTP/MSTP, PPP and PPPoE access technologies, AAA technologies, Huawei Switch and Broadband Access Server; OSPFv2/v3, IS-ISv4/v6, BGP, MP-BGP for IPv6, IGMP, PIM-SM, PIM-DM; MPLS, BGP MPLS VPN, QoS, VRRP, MPLS TE.


1.1.6.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods: Certificate Huawei Certified Datacom Expert-Carrier


1.1.6.5 Key Points of Exam Ethernet Technologies 1.

Etherenet History, Auto-negotiation, Link Aggregation, Port Mirroring, Working principle of layer 2/3 switch

1.

802.1Q encapsulation, VLAN realization on Huawei products, Isolate-User-VLAN

2.

VLAN inter-routing, Super VLAN, QinQ Theory and Configuration

3.

GVRP protocol principle, Configuration and realisation

4.

STP/RSTP/MSTP theory and configuration

IP Basic 1.

IPv4 Address planning, classless IP address planning, Classless Inter Domain Routing, NAT

2.

IPv6 Basic, IPv6 packet format, IPv6 addreses, ICMPv6 theory configuration and realization, Neighbor discovery, IPv6 address auto-configuration, PMTU auto discovery theory, IPv6 address basic configuration

14


RIP Routing Protocol 1.

Distance-vector routing protocol

2.

RIP basic principle and configuration and troubleshooting

3.

RIPng basic principle and configuration

OSPF Routing Protocol 1.

Link-state routing protocol algorithm

2.

OSPF basic principle, configuration and realization: Neighbor and Adjacency, OSPF protocol packet and LSA, Database synchronization, intra-area routing calculation, inter-area routing calculation, external route calculation

3.

OSPF special area principle and configuration: Stub, Totally Stub, NSSA

4.

OSPF troubleshooting

5.

OSPFv3 principle, configuration and realization

IS-IS Routing Protocol 1.

IS-IS basic principle, configuration and realization: ISIS basic concepts, adjacency relationship, database synchronization, route calculation

2.

IS-IS Troubleshooting

3.

IS-ISv6 basic priciple, configuration and realization

BGP Routing Protocol 1.

BGP Basic priciple, configutaion and realization: AS, BGP neighbor, route advertisement, BGP Route Advertisement Principles

2.

BGP Route selection

3.

BGP Route aggregation

4.

BGP route policy: BGP route attribute and route policy

5.

BGP RR and confederation principle, configutaion and realization

6.

BGP multi-homing

7.

BGP toubleshooting

8.

MP-BGP for IPv6 basic priciple, configuration and realization

Route Control and Route Selection 1.

Use ACL, route policy, IP-prefix, AS-Path as a route selection tools

2.

Route redistribution between different routing protocols，default route distribution

3.

Policy-based routing

Multicast 1.

IGMPv1/v2/v3，IGMP Snooping basic principle, configuration and realization

2.

PIM-DM，PIM-SM basic principle, configuration and realization

15


Basic Access and Authentication Technologies 1.

IPoE/IPoEoVLAN/IPoEoA/Static user access principle and realization on Huawei BRAS products ; Web authentication, Fast authentication, Binding authentication working principle, configuration and realization on Huawei BRAS products.

2.

PPPoE/PPPoEoVLAN/PPPoEoA/PPPoA access mode and realization on Huawei BRAS products

3.

Radius protocol principle, configurationrealization and on Huawei BRAS products

MPLS VPN 1.

MPLS basic principle and realization: MPLS frame mode encapsulation, MPLS data forwarding, LDP neighbor discovery and session establishment, LDP label management, MPLS loop avoidance

2.

MPLS VPN basic principle, configuration and realization: single area MPLS VPN basic principle and realization; Application of OSPF in MPLS VPN

3.

MPLS VPN troubleshooting: control plane troubleshooting process and debugging methods, data plane troubleshooting process and debugging methods

MPLS TE 1.

MPLS TE basic principle, configuration and realization

2.

MPLS TE four elements and function, MPLS TE attributes

Qos 1.

IP QoS model, differentiated service model

2.

Traffic classification and Marking, Traffic policing and shaping, congestion management, congestion avoidance, Link Efficiency Mechanisms principle, configuration and realization in Huawei products

3.

Class-based QoS basic principle, configuration and realization in Huawei products

High Availability 1.

ETH-TRUNK、IP-TRUNK、E-TRUNK basic principle

2.

BFD（Bidirectional Forwarding Detection）basic principle

3.

IP Reroute、IP FRR、LDP FRR、VPN FRR、TE FRR basic principle, configuration and realization

4.

RPR basic principle, configuration and realization

5.

VRRP basic principle, configuration and realization

IP Bearer Network and IP MAN Network Design 1.

IP bearer Network, IP MAN Network structure and characteristic

2.

IP bearer Network and IP MAN Network performance requirements

3.

IGP COST design, dual plane switchover and protection

16


1.1.6.6 Referenced Documents VRP Feature Description VRP Configuration Guide VRP Troubleshotting

1.1.6.7 Participating in the Exam HCIE-Carrier certification exam was published through the authorized exam center Pearson VUE. You could take this certification exam in any Pearson VUE center. For more information, please visit Pearson VUE official website (http://www.pearsonvue.com) or from Pearson VUE center.

1.1.6.8 Recommended Training BOM

Training Program

Level

Duration

88980229/ 88980230

HCIE (Huawei Certified Internetwork Expert-Improve Carrier Network Performance) Training

IV

25

1.1.6.9 Huawei Certified Internetwork Expert - Lab Exam (HCIE Carrier Lab Exam) 1) Lab exam will includes all the contents in HCIE-Carrier 2) Lab exam will involve network model which is similar to current network operator model, such as, back bone, bearer network and also MAN network. 3) Lab exam need to involve 12 to 18 equipments, eg : NE40E、ME60、S5300、S3300、 Firewall and so on 4) Lab exam is 8 hours, includes interview, network plaining and configuration, troubleshooting 5) Lab exam will be focused on network operator’s network planning and roll-out. This will be a simulation towards a real live-network roll-out and implementation. Emphasis on the students’ understanding and ability to handle issues towards the real live network 6) During lab exam, students should be able to do the troubleshooting through critical thinking. During the exam process, simulation of the real live network problem will be done in the lab for the students to investigate, this is to emphasize on the students technical understanding and ability to solve a technical issue efficiently and accurately.

The contents rovided to students is a general test paper; other related contents discussed might also appear in the examinations.

17


1.2 Access Network Exam Outline 1.2.1 Introduction of Access Network Exam Certificate

Exam Name

HCNA Access Network

HCNP Access Network

Exam Code

Exam Name

HC-035-210-ENU

HCNA Access Network

HC-035-211-ENU

HCNP Access Network

Exam Duration

Item number

Total Score

Pass Score

90 min

60 multiple-choice questions (single-answer and multiple-answer), true-false questions

1000

600

90 min


1000

600

1.2.2 Huawei Certified Network Associate- Access Network Exam Outline 1.2.2.1 Prerequisites No prerequisites.

1.2.2.2 Exam Content Overview This test covers: xDSL/ATM/GPON/EPON/DataCom basic theory. The following abilities are required. Be familiar with hardware structure, features, standards, board types, functions and interface. Know well about the detail steps of hardware installation, commission, data configuration. Know how to use CLI of equipment to upgrade and be familiar with HSI、IPTV、VOIP test and acceptance, understand how to use NMS, know basic functions of SNMP, and can use NMS to add and monitor equipments.




1.2.2.5 Key Points of Exam Theory 1.

Know about basic theory of xDSL/ATM/GPON/EPON /DataCom/NMS/SNMP.

18


Product 1.

Know about structure, feathures, standards, board types, functions and interfaces of access network products.

Service Configuration 1.

Be familiar with network solution and basic configuration: VLAN/IP configuration and can use NMS for equipment commissioning

2.

Service configuration of HSI、IPTV、VOIP

3.

Add and monitor equipment on NMS

Acceptance test 1.

Know how to test service of HSI、IPTV、VOIP

2.

Know how to use optical power meter.

Software upgrading 1.

Function well with CLI of equipment to upgrade

Maintenance and troubleshooting 1.

Know basic maintenance function on NMS alarm, equipments, problem information collection of NMS and basic problem locating.



1.2.2.7 References HCAN-A (Huawei Certified Access Network-Associate) Huawei product manuals

1.2.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei Access Network Technologies and Device

19


BOM

88980009

Training Program

Level

Huawei Certified Network Associate-Huawei Access Network Technologies and Device

II

Duration 11

1.2.3 Huawei Certified Network Professional- Access Network Exam Outline 1.2.3.1 Prerequisites Past HCAN-A (Huawei Certified Access Network-Associate)

1.2.3.2 Exam Content Overview This test covers: Theory of xDSL/ATM/GPON/EPON/DataCom, the following abilities are required for the tester, usage of SNMP theory; knowing on troubleshooting of xDSL/ATM/GPON/EPON; knowing about usage of DC upgrade tool, batch upgrade,NMS upgrade; knowing how to do acceptance test for service of HSI、IPTV、VOIP, Familiar with the typical solutions for Access Network migration and the usage of the migration tools





Be familiar with xDSL/ATM/GPON/EPON /DATACOM; know theory of SNMP.

Product knowledge 1.

Know hardware structure, features, standards, board type, fuction and interface.

Data configuration 1.

Understand network solution and basic configuration: VLAN/IP configuration, and can use NMS for equipment commissioning.

2.

Know how to configure services on HSI、IPTV、VOIP.

20


3.

Know how to add and monitor equipments on NMS.

4.

NMS single-server system installation.

5.

Function well on data plan and network design for FTTx

6.

Function well on the typical solutions for Access Network migration and the usage of the migration tools.

Acceptance test 1.

Service acceptance testing on HSI、IPTV、VOIP

2.

Usage of optical power meter.

3.

Usage of network migration tools.


Usage of DC tool, batch upgrade and NMS upgrade.


Know NMS alarms, problem information collection on NMS, basic troubleshooting. Know NMS operating system and basic operation of database.



1.2.3.7 References HCAN-A (Huawei Certified Access Network-Associate) HCAN -P(Huawei Certified Access Network-Professional) Huawei product manuals

1.2.3.8 Recommended Training Program Huawei Certified Network Professional-Huawei Access Network Technologies and Device BOM 88980010

Training Program

Huawei Certified Network Professional-Huawei Access Network Technologies and Device

Level

Duration

III

13

21


22


1.3 Optical Network Exam Outline 1.3.1 Introduction of Optical Network Exam Certificate

Exam Name

HCNA OPTICAL NETWORK

HCNP-Optical Network

Exam Code

Exam Name

Exam Duration

HC-035-230-ENU

Huawei Certified Network Associate-Optical Network

HC-035-231-ENU

Huawei Certified Network Professional-Optical Network

90 min

90 min

Item number 60 multiple-choice questions (single-answer and multiple-answer), true-false questions 60 multiple-choice questions (single-answer and multiple-answer), true-false questions

Total Score

Pass Score

1000

600

1000

600

1.3.2 Huawei Certified Network Associate-Optical Network Exam Outline 1.3.2.1 Prerequisites No prerequisites.

1.3.2.2 Exam Content Overview This test covers: SDH/WDM/datacom basic theory. The following abilities are required. Be familiar with hardware structure, features, standards, board types, functions and interface. Know well about the detail steps of hardware installation, commission, data configuration. Know how to use DC tool, board-lever upgrade and package loading simulation and be familiar with MSTP/HMSTP/WDM test and acceptance, understand how to use NMS, know basic functions of SNMP, and can use NMS to add and monitor equipments.



Re-certification Methods To re-certify, pass ONE of the following before the certification expiration date:  Pass any subject of the same level of certification in the field of the local technology  Pass any subject of the high-level certification in the field of the local technology

23



Know about basic theory of SDH/WDM/datacom/NMS/SNMP.

Product 3.

Know about structure, feathures, standards, board types, functions and interfaces of optical network products.

Configuration 4.

Be familiar with network solution and DCN configuration, NE ID/IP configuration, DWDM commissoning

5.

Service configuration of TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY

6.

Protect service configuration of SNCP/MSP/APS/TPS/LAG

7.

Add and monitor equipment on NMS

Acceptance test 8.

Know how to test service of TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY

9.

Know how to test SNCP/MSP/APS/TPS/LAG service.

10.

Know how to use BER Tester and optical power meter.

Software upgrading: 11.

Function well with DC tool, board-level upgrading and simulation package loading upgrade.


Know basic maintenance function on NMS alarm, equipments, problem information collection of NMS and basic problem locating.



1.3.2.7 References HCNA (Huawei Certified Network Associate-Optical Network) Huawei product manuals

24


1.3.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei Optical Network Technologies and Device Training BOM

Training Program

88980011

Level

Duration

II

15

Huawei Certified Network Associate-Huawei Optical Network Technologies and Device Training

1.3.3 Huawei Certified Network Professional-Optical Network Exam Outline 1.3.3.1 Prerequisites No prerequisites.

1.3.3.2 Exam Content Overview This test covers: Theory or usage of SDH/WDM/datacom/clock, the following abilities are required for the tester, understand usage of SNMP theory/OAM of MSTP/QoS on NMS; knowing on troubleshooting of SDH/WDM; knowing about usage of DC update tool, board-lever update, updating simulation; knowing how to do acceptance test for service of MSTP/HMSTP/WDM, function well with cutover, service miguration solution making and acting.





Be familiar with SDH/WDM/Datacom/Clock basics; know theory of SNMP/ASON.


Know hardware structure, features, standards, board type, fuction and interface.

25


Data configuration 1.

Understand network solution and DCN configuration, NE ID/IP configuration, and can use NMS for MSTP/HMSTP/WDM equipment commissioning.

2.

Know how to configure services on TDM(E1\STM-1\4\16\64), ETH, ODUK, GE, 40G\ANY level.

3.

Know how to configure protection of services such as SNCP/MSP/APS/TPS/LAG.

4.

Know how to add and monitor equipments on NMS.

5.

Know how to configure QoS/Clock/OAM of services.

6.

NMS single-server system installation.

7.

Function well on product data collection and basic service planning.

8.

Function well on solution making and acting of cutover and service miguration.

Acceptance test 1.

Service level on TDM(E1\STM-1\4\16\64)\ETH\ODUK\GE\40G\ANY

2.

Know how to test protected service by SNCP/MSP/APS/TPS/LAG

3.

Usage of BER Tester and optical power meter.

4.

Usage of SDH analyzer, OSA, Smartbits.


Usage of DC tool, board-level upgrading and simulation upgrading.


Know NMS alarms, problem information collection on NMS, basic troubleshooting. Know NMS operating system and basic operation of database.



1.3.3.7 References HCNA (Huawei Certified Network Associate-Optical Network) HCNP (Huawei Certified Network Professional-Optical Network) Huawei product manuals

26


1.3.3.8 Recommended Training Program Huawei Certified Network Professional-Huawei Optical Network Technologies and Device Training BOM 88980012

Training Program

Level

Duration

Huawei Certified Network Professional-Huawei Optical Network Technologies and Device Training

III

10

27


1.4 Microwave Product Exam Outline 1.4.1 Introduction of Microwave Product Exam Certificate

Exam Name

HCNA Microwave Product

HCNP Microwave Product

Exam Duration

Exam Code

Exam Name

HC-035-240-ENU

Huawei Certified Network Associate-Microwave Product

HC-035-241-ENU

Huawei Certified Network Professional-Microwave Product

90 min

90 min


Total Score

Pass Score

1000

600

1000

600

1.4.2 Huawei Certified Network Associate-Microwave Product Exam Outline 1.4.2.1 Prerequisites No prerequisites.

1.4.2.2 Exam Content Overview The HCNA-HMTD exam covers digital microwave communication principle, ethernet basic, RTN 600/900 product knowledge, RTN 600/900 installation and commissioning, hybrid microwave configuration, acceptance test, software upgrade, routine maintenance.




1.4.2.5 Key Points of Exam 1.

Digital microwave communication principle

2.

Ethernet basic

3.

Main characteristics of RTN 600/900 equipment

4.

Hardware structure, function and application of RTN 600/900 equipment

5.

Function and interface of boards in RTN 600/900

28


6.

Function and application of ODU/antenna

7.

protection technologies in OptiX RTN 900 network

8.

Installation procedure of RTN 600/900 equipment

9.

RTN 600/900 commissioning

10.

RTN 600/900 hybrid microwave configuration

11.

RTN 900 acceptance test

12.

RTN 900 software upgrade

13.

RTN 600/900 routine maintenance

14.

U2000-T Alarm and Performance



1.4.2.7 References Huawei Certified Network Training Courses — HCNA: Huawei Microwave Technology and Device (HMTD) Huawei product manuals

1.4.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei Microwave Technologies and Device Training. BOM

88980013

Training Program

Huawei Certified Network Associate-Huawei Technologies and Device Training.

Level

Duration

II

9 days

Microwave

1.4.3 Huawei Certified Network Professional-Microwave Product Exam Outline 1.4.3.1 Prerequisites No prerequisites.

29


1.4.3.2 Exam Content Overview The HCNP-HMTD exam covers digital microwave comunication, ethernet basic, PSN basic, RTN 900 product knowledge, RTN 900 installation and commissioning, RTN 900 packet microwave configuration, QoS/OAM/Clock configuration, RTN 900 acceptance test, software upgrade, troubleshooting. U2000 Software Installation, U2000 product knowledge.





Digital microwave communication principle

2.

Ethernet basic

3.

IP/MPLS/PWE3 basic

4.

Main characteristics of RTN 900 equipment

5.

Hardware structure, function and application of RTN 600/900 equipment

6.

Function and interface of boards in RTN 600/900

7.

Function and application of ODU/antenna

8.

Installation procedure of RTN 600/900 equipment

9.

RTN 900 commissioning

10.

RTN 900 packet service configuration

11.

RTN 900 MPLS APS configuration

12.

RTN 900 QoS/OAM/Clock configuration

13.

RTN 900 acceptance test

14.

RTN 900 software upgrade

15.

RTN 900 troubleshooting/data collection

16.

U2000-T system knowledge

17.

U2000 Single-Server System Software Installation


30



1.4.3.7 References Huawei Certified Network Training Courses — HCNP: Huawei Microwave Technology and Device (HMTD) Huawei product manuals

1.4.3.8 Recommended Training Program Huawei Certified Network Professional-Huawei Microwave Technologies and Device Training BOM

88980014

Training Program

Huawei Certified Network Professional-Huawei Microwave Technologies and Device Training

Level

Duration

III

7

31


2 Core Network 2.1 Mobile Soft Switch Exam Outline 2.1.1 Introduction of Mobile Soft Switch Exam Outline Certificate

Exam Name

Exam Code

Exam Name

Exam Duration

HCNA Mobile Soft Switch

HC-035-311-ENU

Huawei certified mobile soft switch engineer

90 minutes

HCNP Mobile Soft Switch

HC-035-310-ENU

Huawei certified mobile soft switch senior engineer

90 minutes

Item number 60 single choice, multiple choices, and true or false 60 single choice, multiple choices, and true or false

Total Score

Pass Score

900

550

900

550

2.1.2 Huawei Certified Network Associate- Mobile Soft Switch Exam Outline 2.1.2.1 Prerequisites No prerequisites.

2.1.2.2 Exam Content Overview Mobile switching center and Media Gateway test covers the basic knowledge of mobile core network communication, including TCP/IP, basic theory of mobile soft switch, SS7 signaling, hardware system of the MSOFTX3000 and UMG8900, data configuration for network element interworking, common number analysis, basic call flow and the corresponding protocols, MSOFTX3000 and UMG8900 fault troubleshooting, routine maintenance and major maintenance and operation of the MSOFTX3000 and UMG8900.




2.1.2.5 Key Points of Exam IP network 1.

Basic concepts of network, layer 2 signaling exchanging, virtual local area network

32


2.

Architecture of the open systems interconnection protocol and the TCP/IP protocol, functions of each layer and packet encapsulation

3.

IPv4 subnetting

Knowledge and principle of the MSOFTX3000 and UMG8900 1.

The basic principle and architecture evolution of the core network

2.

Product knowledge of the CPCI and ATCA MSOFTX3000, and the board layout and capacity planning of the UMG8900

3.

Data configuration for interconnection between the MSOFTX3000 and the UMG8900 and the corresponding network elements

4.

Common number analysis of MSOFTX3000

5.

Routine maintenance and major maintenance and operation including version upgrade, patch loading, and operation rollback

Basic call flow and the corresponding protocols 1.

Signaling analysis during location upgrade, ordinary calls (mobile originated calls, mobile terminated calls and inter-MSC calls), handovers and short messages. The way how the protocols such as H248, BICC, and SIGTRAN are realized in each interface of the MSOFTX3000 and UMG8900

Troubleshooting 1.

Troubleshooting in hardware fault and replacement, location update, and common calls

This document only provides a general guide for the candidates rather than an actual coverage of the test content.

2.1.2.6 Participating in the Exam N/A

2.1.2.7 Reference For product knowledge of the MSC and MGW, refer to the customer product document and manual.

2.1.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device Training BOM

88980015

Training Program

Level

Duration

Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device Training

II

21

33


2.1.3 Huawei Certified Network Professional - Mobile Soft Switch Exam Outline 2.1.3.1 Requirements for Candidates No prerequisites.

2.1.3.2 Exam Content Overview Medium-level mobile soft switch test covers the knowledge of the core network communication, data configuration between interconnected network elements, integrated number and route analysis , integrated signaling analysis and the corresponding protocols, integrated fault location, MSC Pool and AOIP solutions.




2.1.3.5 Key Points of Exam IP network 1.

Basic concepts in network, layer 2 and layer 3 signaling exchanging, and IP subnetting

2.

IP transformation in mobile communications

Product knowledge and principle 1.

The principle and architecture of mobile soft switch in the core network; data configuration for interworking between network elements

2.

Integrated number and route analysis

The protocols used in mobile soft switch and signaling analysis 1.

The protocols such as MAP, CAP, BSSAP/RANAP, BICC, SIP, BICC, SIGTRAN, H248 and SCTP in the mobile soft switching interfaces and the signaling analysis during basic services, supplementary service, value-added services, mobility management, and handovers

Integrated troubleshooting 1.

Troubleshooting in the service, including bearer and signaling

34


Product solutions 1.

MSC Pool and AoIP


2.1.3.6 Participating in the Exam N/A

2.1.3.7 Reference For product knowledge of the mobile soft switch, refer to the customer product information.

2.1.3.8 Recommended Training Program Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and Device Training BOM

Training Program

Level

Duration

88980016

Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and Device Training

III

21

35


2.2 NGN Exam Outline 2.2.1 Introduction of NGN Exam Outline Certificate

Exam Name

HCNA NGN

HCNP NGN

Exam Code

HC-035-320-ENU

HC-035-321-ENU

Exam Name

Exam Duration

Huawei Certified Network Associate-NGN

Huawei Certified Network Professional-NGN

90 min

90 min


Total Score

Pass Score

1000

550

1000

550

2.2.2 Huawei Certified Network Associate-NGN Exam Outline 2.2.2.1 Prerequisites No prerequisites.

2.2.2.2 Exam Content Overview The NGN Primary Engineer Certification exam covers NGN system architecture, NGN protocol and Huawei U-SYS solution; Huawei NGN product data configuration, operation and maintenance, and troubleshooting.




2.2.2.5 Key Points of Exam NGN Basic Principle 1. The basic concepts, system architecture, services, networking and applications of NGN. 2.

The components, services, networking and applications of Huawei U-SYS solution.

3.

The functions, features, applications, terms, stack structure and messages of NGN protocols (MGCP, H.248, SIP, SIGTRAN).

36


NGN Product Introduction 1.

The network topology, services, functions, system structure, board functions, board indicators, networking, applications and technical specifications of SoftX3000/UMG8900/SG7000/MRS6100/SE2300.

2.

The network topology, services and functions of U-Path.

NGN Basic Data Configuration 1.

The hardware and local office data configuration of SoftX3000.

2.

The hardware data configuration, MGW data configuration and IP bearer data configuration.

3.

The hardware data configuration of MRS6100.

4.

The hardware data configuration and local office data configuration of SG7000.

NGN Data Configuration & Acceptance Testing 1.

The service data configuration steps of SoftX3000, and the common service data configuration (charging data configuration, media gateway data configuration, protocol data configuration, SS7 signaling data configuration, routing data configuration, trunk data configuration, number analysis data configuration, subscriber data configuration).

2.

The service data configuration steps of UMG8900, and the common service data configuration (TG data configuration, SG data configuration).

3.

The service data configuration steps of MRS6100, and the system data configuration and the voice file loading.

4.The service data configuration steps of SG7000, and the common service data configuration (MTP data configuration, M3UA data configuration). 5.

The service data configuration steps of SE2300, and the common service data configuration (SNMP data configuration, signaling PROXY and media PROXY data configuration).

6.

The software installation and the service configuration of U-Path.

NGN Maintenance & Troubleshooting 1.

The routine operation and maintenance of SoftX3000 (operator authority management, database backup and restoration, data consistent checking between the host and BAM, log management, alarm management, device management, media gateway management, protocol and signaling management, trunk circuit management, subscriber management, bill management).

2.

The routine operation and maintenance of iGWB.

3.

The routine operation and maintenance of UMG8900 (database backup, log management, alarm management, device management, protocol tracing, service management).

4.

The routine operation and maintenance of MRS6100 (log management, alarm management, device management, message tracing).

5.

The routine operation and maintenance of SG7000 (database backup, log

37


management, alarm management, device management, signaling tracing). 6.

The routine operation and maintenance of SE2300 (log management, alarm management, device management, signaling PROXY and media PROXY debugging).

7.

The routine operation and maintenance of U-Path (log management, system status browsing, and bill management).

8.

The common troubleshooting of NGN equipment.



2.2.2.7 References Huawei NGN product manuals

2.2.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei NGN Technologies and Device Training BOM

88980017

Training Program

Level

Duration

II

20

Huawei Certified Network Associate-Huawei UMG&SBC Technologies and Device Training

2.2.3 Huawei Certified Network Professional-NGN Exam Outline 2.2.3.1 Prerequisites No prerequisites.

2.2.3.2 Exam Content Overview The NGN Primary Engineer Certification exam covers NGN system architecture, NGN protocol and Huawei U-SYS solution; Huawei NGN product data configuration, operation and maintenance, and troubleshooting.

38





2.2.3.5 Key Points of Exam NGN Basic Principle 1.

The command parameters and call processing procedure of NGN protocols.

2.

The principle, application of NGN dual home.

3.

The NGN C4 and C5 office migration solution.

NGN Product Introduction 1.

The working principle and service processing procedure of SoftX3000.

2.

The principle, processing procedure, operation and original bill format of NGN charging system

3.

The system structure and configuration of iGWB.

4.

The means of improving voice quality of NGN.

5.

The working principle and service processing procedure of UMG8900.

6.

The working principle, announcement principle and service processing procedure of MRS6100.

NGN Basic Data Configuration 1.

The service data configuration of SoftX3000 (number changing data configuration, call barring data configuration).

2.

The language conversion of voice and voice loading of MRS6100.

3.

The service data configuration of SG7000 (MTP load sharing data configuration).

NGN Data Configuration & Acceptance Testing 1.

The data planning and data configuration of NGN dual home.

2.

The NGN C4 and C5 office migration operation.

NGN Maintenance & Troubleshooting 1.

The routine maintenance of NGN dual home.

2.

The common problem analysis and processing of NGN protocols.

3.

The troubleshooting of NGN network.

39




2.2.3.7 References Huawei NGN product manuals

2.2.3.8 Recommended Training Program Huawei Certified Network Professional-Huawei NGN Technologies and Device Training BOM

Training Program

Level

Duration

88980018

Huawei Certified Network Professional-Huawei NGN Technologies and Device Training

III

11

40


2.3 MGW&SBC Exam Outline 2.3.1 Introduction of MGW&SBC Exam Outline Certificate

Exam Name

HCNA MGW&SBC

Exam Code

Exam Name

HC-035-330-ENU

HCNA MGW&SBC (Huawei Certified Network Associate-MGW&SBC)

Exam Duration

90 minutes

Item number 60 questions: Single choice, multiple choices, and true or false

Total Score

Pass Score

1000

550

2.3.2 Huawei Certified Network Associate- MGW&SBC Exam Outline 2.3.2.1 Requirements for Candidates No prerequisites.

2.3.2.2 Exam Content Overview Test for MGW&SBC software commissioning engineer contains the UMG8900 and the session border controller (SBC), the mainstream products in Huawei mobile soft switch (NGN/GU and CDMA).The test covers hardware components and working principle of the UMG8900 and the SBC, their position in the network and the networking architecture, external interface type, principle of the corresponding protocols such as H.248, ATM, SIP, and SIGTRAN, installation and commissioning, data configuration, operation and maintenance, and troubleshooting methods.




2.3.2.5 Key Points of Exam Principle 1.

The position and function of the UMG8900/SBC in NGN/CS networking

2.

System principle of the UMG8900

3.

Common-used protocols such as SIP, ATM, H.248, SIGTRAN and No.7 signaling

41


4.

Location and function of the SBC in the network; working principle, hardware specification and typical networking of NAT/ALG/PROXY.

5.

Working principle of the media gateway system, data and singling processing flow between boards

Produce knowledge 1.

Hardware architecture and components of the UMG8900 and the SBC

2.

Function of the hardware and the logical boards of the UMG8900 and the SBC

3.

System configuration principle, cascading mode and typical board configuration of the UMG8900 and the SBC

Software Installation 1.

Software upgrade, tone file creating and loading, and troubleshooting during the software commissioning of the UMG8900 and the SBC

Configuration Description 1.

General flow of data configuration, hardware configuration and local office data configuration of the UMG8900 and the SBC

2.

Data configuration specifications of the UMG8900 and the SBC

3.

Commissioning of the interconnection between the UMG8900 and the SBC and troubleshooting capacity

4.

Commissioning configuration of the interconnection between the UMG8900 and the SBC on an NGN and CS

5.

Board layout and capacity planning of the UMG8900 and the SBC


2.3.2.6 Participating in the Exam The test is released by the authorized test center-Pearson VUE. You can select the nearest Pearson VUE for application and to take the test. For more details about the Pearson VUE, visit http://www.pearsonvue.com.cn.

2.3.2.7 Reference Customer product information of the UMG8900/SBC

2.3.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei UMG&SBC Technologies and Device Training BOM

88980019

Training Program

Huawei Certified Network Associate-Huawei UMG&SBC Technologies and Device Training

Level

Duration

II

9

42


2.4 USC Exam Outline 2.4.1 Introduction of USC Exam Outline Certificate

Exam Name

Exam Code

SingleSDB

SingleSDB

Exam Name

Exam Duration

Item number

HC-035-340-ENU

90 minutes

HC-035-341-ENU

90 minutes

60 single-choice, multiple-choice, or true or false questions 60 single-choice, multiple-choice, or true or false questions

Total Score

Pass Score

1000

550

1000

600

2.4.2 Huawei Certified Network Associate-USC Exam Outline 2.4.2.1 Candidate Requirements No prerequisites.

2.4.2.2 Examination Content The SingleSDB primary examination covers the basic knowledge of the HLR in the CN, including CN basic principles, HLR basic principles, and the networking architecture, solutions, and basic principles of the SingleSDB. Candidates should be able to: 

Be familiar with the hardware structure of the SingleSDB



Understand the hardware installation flow, system cascading principles, and procedure



Know the USC software architecture and software installation procedure



Have ever completed software installation, commissioning, and data configuration in the laboratory or in practice



Understand the USC signaling, data, provisioning system, OM interconnection, and commissioning



Familiarize themselves with the main service and service flow of the HLR



Understand how to perform subscriber data management, service management, subscription management, and batch operations in Huawei HLR9820




43

Huawei Certification Exam Outline (Partner) To re-certify, pass ONE of the following before the certification expiration date:  Pass any subject of the same level of certification in the field of the local technology  Pass any subject of the high-level certification in the field of the local technology

2.4.2.5 Key Points of Exam Systematic Principles 1.

General SingleSDB solutions

2.

Networking of the SingleSDB, multiple-NE deployment, and features

3.

Position of the HLR9820 in the network

4.

Interfaces, functions, and protocol stack supported by the HLR9820

5.

Software functions of the HLR9820: FE system function structure, function structure of signaling processing subsystem; subscriber data management subsystem, data service subsystem, data storage subsystem

Product Knowledge 1.

Buses and functions of the ATCA platform

2.

Hardware logical structure, cabinet, components, board classification, board function, meaning of major indicators, board deployment rules, LAN switch deployment rules of the HLR9820

3.

Logical board functions, hardware configuration rules, and typical board configuration rules of the HLR9820

4.

Security performance, features, flow control, and multi-level backup mechanism of the HLR9820

5.

Inter-subrack cascading, hardware installation, and internal cable connection of the HLR9820

Installation Procedure, Flow, and Operation 1.

Conditions, general flow, and notes of hardware installation, and hardware acceptance standards

2.

Procedure and principles of software installation

3.

Connection modes and interfaces used for the SingleSDB to interwork with the maintenance network, provisioning system, and other devices

4.

Rules for installing and deploying software of the HLR9820 and software installation of the HLR9820

5.

Software installation and system commissioning of the HLR9820

Data Configuration and Commissioning 1.

Rules for deploying processes on boards

2.

Commonly used numbering scheme in the GSM/UMTS network

3.

Hardware configuration and reliability features of the HLR9820

4.

Software structure and reliability features of the HLR9820

5.

Basic concepts of the HLR9820 software system: site, NE, cluster, node, module

44


6.

Main service flows and implementation principles such as location update, authentication, and voice calls

7.

Data configuration of the USCDB

8.

Data configuration of the GU HLR9820

9.

Global data configuration

10. Rules and methods for signaling data configuration Subscriber Data Management Function Provided by the HLR9820 1.

Features and measurement of the HLR9820

2.

Service processing flow, software architecture, MAP service flow processing path, and service flow processing path of the provisioning system

3.

Commonly used service and service management methods of the HLR9820

4.

Subscription data management provided by the HLR9820

5.

Batch operations provided by the HLR9820 NOTE

The examination content serves only as the guidelines for universal examinations. Other content that is not mentioned in this document may appear in an examination.

2.4.2.6 Examination Participation This examination is published through the examination center authorized by Pearson VUE. You can choose the nearest examination center authorized by Pearson VUE to take the examination. To query information about the authorized examination center, visit http://www.pearsonvue.com.cn.

2.4.2.7 References SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers – Primary Each product manual of the SingleSDB

2.4.2.8 Recommended Training Program SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers – Primary BOM

88980020

Training Program

SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers – Primary

Level

Duration

II

10

45


2.4.3 Huawei Certified Network Professional -USC Exam Outline 2.4.3.1 Candidate Requirements No prerequisites.

2.4.3.2 Examination Content The advanced SingleSDB examination covers the networking and product knowledge of the HLR in the core network (CN). Candidates need to not only understand the primary knowledge but also be able to perform the following operations: 

Main signaling and service flows



Networking and redundancy solutions and technologies



Routine operation and maintenance




2.4.3.5 Key Points of Exam Systematic Principles 1.

Software and hardware structure and basic principles of the SingleSDB

2.

Networking solutions, architecture, and reliability design solutions of the SingleSDB

3.

Typical service signaling flows of the HLR9820

4.

Principles of the DS system, principles of data replication, synchronization, and verification, and maintenance methods

5.

Security performance, features, flow control, and multi-level backup mechanism of the HLR9820


Networking solution differences and analysis of typical redundancy scenarios

2.

Data layer redundancy, service layer redundancy, separated data and services, distributed deployment, and redundancy principles

3.

Internal networking and IP planning

4.

External networking requirements and interconnection methods of the HLR9820

46


5.

System configuration, deployment rules, and typical scenarios analysis

Data Configuration 1.

Typical networking and configuration of typical networking scenarios

2.

Basic data configuration, global data configuration, and signaling data configuration of the HLR9820

3.

Commissioning and interconnection of the HLR9820

4.

Subscriber data management provided by the HLR9820

5.

Redundancy principles and commonly used maintenance and configuration: redundancy operations, baseline creation, incremental data synchronization, redundancy takeover, and switchback

Operation and Maintenance 1.

Commonly used methods for operation and maintenance of the SingleSDB

2.

Implementation principles and operation methods of performance measurement, alarms, license, scheduled tasks, and NTP function

3.

Detailed operations of database backup and recovery

4.

Commonly used operation commands and methods

5.

Various operation and maintenance scenarios and notes

6.

Methods and detailed operations of system health check

Troubleshooting 1.

Commonly used troubleshooting: fault classification, typical scenarios, fault identification methods, and emergency handling NOTE

The examination content serves only as the guidelines for universal examinations. Other content that is not mentioned in this document may appear in an examination.

2.4.3.6 Examination Participation This examination is published through the examination center authorized by Pearson VUE. You can choose the nearest examination center authorized by Pearson VUE to take the examination. To query information about the authorized examination center, visit http://www.pearsonvue.com.cn.

2.4.3.7 References SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers – Advanced Each product manual of the SingleSDB SingleSDB Redundancy Manual

47


2.4.3.8 Recommended Training SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers Advanced BOM 88980021

Training Program

SingleSDB (G/U HLR9820) Training Manual for Installation and Commissioning Engineers - Advanced

Level

Duration

III

4

48


2.5 SG Exam Outline 2.5.1 Introduction of SG Exam Outline Certificate

Exam Name Huawei Certified Network Associate-Huawei SG Technologies and Device Huawei Certified Network Professional-Huawei SG Technologies and Device

Exam Code

Exam Name

HC-035-350-CHS

HCNA SG (Huawei Certified Network Associate-SG)

HC-035-351-CHS

HCNP SG (Huawei Certified Network Professional-SG)

Exam Duration

90 min

90 min


Total Score

Pass Score

1000

550

1000

550

2.5.2 Huawei Certified Network Associate-SG Exam Outline 2.5.2.1 Prerequisites No prerequisites.

2.5.2.2 Exam Content Overview The NGN Primary Engineer Certification exam covers SS7 signaling system, signaling network, SIGTRAN protocol, data configuration, operation and maintenance, and troubleshooting.




2.5.2.5 Key Points of Exam SG7000 Protocol 1.

The basic concepts, architecture, MTP functions of SS7 Signaling System and signaling network.

2.

The basic function of SCCP.

3.

The format of SCCP message and the meaning of the message which are often used.

4.

The basic concept of SIGTRAN, the structure and signaling procedures of

49


M2PA/M3UA. SG7000 Product Introduction 1.

The SG7000 system structure and hardware architecture, including the cabinet, frame, board and the performance features of SG7000.

2.

The SG7000 logical architecture and signaling flow.

3.

The hardware data, narrowband link data and broadband link data.

4.

The common operation of maintenance such as message tracing, log management, alarm management and link management.

5.

The SG7000 client software installation.

6.

The SCCP and M2PA data configuration of SG7000.



2.5.2.7 References Huawei SG7000 product manuals

2.5.2.8 Recommended Training Program Huawei SG7000 Primary Training. BOM

Training Program

Level

Duration

88980022

Huawei SG7000 Primary Training.

II

5

2.5.3 Huawei Certified Network Professional-SG Exam Outline 2.5.3.1 Prerequisites No prerequisites.

2.5.3.2 Exam Content Overview The SG Engineer Certification exam covers MTP/SCCP loadsharing, SG advanced troubleshooting.

50






The basic principle of MNP service.

2.

The SG7000 MTP loadsharing data configuration.

3.

The SG7000 SCCP loadsharing data configuration.

4.

The troubleshooting method of SG7000.

5.

The information collection of SG7000 trouble.

6.

The hardware trouble, link trouble and SCCP layer trouble.



2.5.3.7 References Huawei SG7000 product manuals

2.5.3.8 Recommended Training Program Huawei SG7000 Professional Training. BOM

Training Program

Level

Duration

88980023

Huawei SG7000 Professional Training

III

2

51


3 Wireless 3.1 GSM Exam Outline 3.1.1 Introduction of GSM Exam Outline Certificate

Exam Name

HCNA-GSM

HCNP-GSM

Exam Code

Exam Name

HC-035-410-ENU

HCNA GSM (Huawei Certified Network Associate-GSM)

HC-035-411-ENU

HCNP-GSM (Huawei Certified Network Professional-GSM)

Exam Duration

90 min

90 min


Total Score

Pass Score

1000

600

1000

600

3.1.2 Huawei Certified Network Associate-GSM Exam Outline 3.1.2.1 Prerequisites No prerequisites.

3.1.2.2 Exam Content Overview HCNA GSM exam covering the basic principles of the GSM and GPRS systems, product architecture and specifications, typical hardware configuration, engineering survey and hardware installation, software commissioning and testing, acceptance testing, maintenance and troubleshooting.




3.1.2.5 Key Points of Exam Principles 1.

The basic principle of GSM and GPRS technology

2.

GSM system architecture and the wireless network interface

52



BSC6900 (GSM) system overview, hardware architecture and product specifications

2.

BTS3900/DBS3900 (GSM) hardware architecture and module functions

3.

Typical configuration of BTS3900/DBS3900 (GSM)

4.

BTS3900/DBS3900 (MBTS) hardware architecture and module functions

5.

Typical configuration of BTS3900/DBS3900 (MBTS)

Engineering survey and hardware installation 1.

Engineering survey (product knowledge)

1)

Engineering survey of site controller

2)

Engineering survey of site

2.

Installation design

1)

Installation design of site controller

2)

Installation design of site

3.

Hardware installation

1)

Hardware installation of site controller

2) Hardware installation of site (including feeder system, monitoring, and other peripherals) Software Commissioning 1.

Remote/local commissioning of the site

2.

Site integration

3.

Site service testing

4.

Testing tool and testing indicators

Acceptance testing 1.

Hardware installation check

2.

Acceptance of a single-site (including service testing)


Site hardware replacement

2.

Site information collection

3.

Deal with site problems on-site

4.

Deal with site emergency recovery on-site


53


3.1.2.6 Participating in the Exam 3.1.2.7 References The exam is delivered by Pearosn VUE authorized test centers.You can register with the nearest test center to take the exam. To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE :http://www.vue.com/vtclocator/

3.1.2.8 Recommended Training Program HCNA-GSM(Huawei Certified Network Associate-Huawei GSM Technologies and Device) training. BOM 88980024

Training Program

Level

Duration

II

11

HCNA-GSM(Huawei Certified Network Associate-Huawei GSM Technologies and Device) training.

3.1.3 Huawei Certified Network Professional-GSM Exam Outline 3.1.3.1 Prerequisites No prerequisites.

3.1.3.2 Exam Content Overview GSM exam covering the basic principles of the GSM and GPRS systems, product architecture and specifications, typical hardware configuration, engineering survey and hardware installation, software commissioning and testing, acceptance testing, maintenance and troubleshooting. Based on the HCNA examination, HCNP examination add the containts below: basic signaling process of the GSM system, the M2000 and CME-related product knowledge, data configuration, software commissioning of site controler, site software upgrades.




54



The basic principle of GSM and GPRS technology

2.

The signaling process of GSM system


BSC6900 (GSM) system overview, hardware architecture and product specifications

2.

BTS3900/DBS3900 (GSM/MBTS) hardware architecture, module functions and typical configuration

3.

CME configuration tool principles and operational guidance

4.

The M2000 system architecture and operating instructions


Engineering survey (product knowledge) of controller and site

2.

Installation design of controller and site

3.

Hardware installation of controller and site (including feeder system, monitoring, and other peripherals)

Software Commissioning 1.

Remote/local commissioning, integration and service testing of the site

2.

Testing tool and testing indicators

3.

Data configuration(site controller and site)

4.

Software commissioning of the controller

5.

New site integration through M2000



2.


3.

Acceptance of controller

Software Upgrade 1.

Local upgrade of the site

2.

Remote upgrade of the site


Hardware replacement and information collection of controller

2.

Deal with problems and emergency recovery of controller on-site

55


3.

Network inspection through NIC and OMSTAR tools


3.1.3.6 Participating in the Exam he exam is delivered by Pearosn VUE authorized test centers.You can register with the nearest test center to take the exam. To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE :http://www.vue.com/vtclocator/

3.1.3.7 References 3.1.3.8 Recommended Training Program HCNP-GSM(Huawei Certified Network Professional-Huawei GSM Technologies and Device) training. BOM

Training Program

Level

Duration

88980025

HCNP-GSM(Huawei Certified Network Professional-Huawei GSM Technologies and Device) training.

III

14

56


3.2 WCDMA Exam Outline 3.2.1 Introduction of WCDMA Exam Outline Certificate

Exam Name

HCNA-WCDMA

HCNP-WCDMA

Exam Code

Exam Name

Exam Duration

HC-035-420-ENU

HCNA WCDMA (Huawei Certified Network Associate-WCDMA)

HC-035-421-ENU

HCNP-WCDMA (Huawei Certified Network Professional-WCDMA)

90 min

90 min


Total Score

Pass Score

1000

600

1000

600

3.2.2 Huawei Certified Network Associate-WCDMA Exam Outline 3.2.2.1 Prerequisites No prerequisites.

3.2.2.2 Exam Content Overview HCNA WCDMA exam covering the basic principles of the WCDMA and GPRS systems, product architecture and specifications, typical hardware configuration, engineering survey and hardware installation, software commissioning and testing, acceptance testing, maintenance and troubleshooting.





The basic principle of WCDMA technology

2.

WCDMA system architecture and the wireless network interface

57


Product knowledge 1. BSC6900 (WCDMA) system overview, hardware architecture and product specifications 2.

BTS3900/DBS3900 (WCDMA) hardware architecture and module functions

3.

Typical configuration of BTS3900/DBS3900 (WCDMA)

4.

BTS3900/DBS3900 (MBTS) hardware architecture and module functions

5.

Typical configuration of BTS3900/DBS3900 (MBTS)


2.

3.

Engineering survey (product knowledge) 1)

Engineering survey process of controller

2)

Engineering survey process of site

Installation design 1)

Site Controller installation design

2)

Site Installation design

Hardware Installation 1)

Site controller Installation

2)

Site (including feeder system, monitoring, and other peripherals) Installation

Software Conmmissioning 1.

Remote/Local commissioning of the site

2.

Site integration and site service testing

3.

Testing indicators

4.

Testing tool

5.

Acceptance testing 1)


2)



Hardware Replacement

2.

Information collection for site

3.

Deal with problems on site

4.

On-site emergency recovery for site


58


3.2.2.6 Participating in the Exam 3.2.2.7 References 3.2.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei WCDMA Technologies and Device BOM

Training Program

Level

Duration

II

9

Huawei Certified Network Associate-Huawei WCDMA Technologies and Device

88980026

3.2.3 Huawei Certified Network Professional-WCDMA Exam Outline 3.2.3.1 Prerequisites No prerequisites.

3.2.3.2 Exam Content Overview WCDMA exam covering the basic principles of the WCDMA and GPRS systems, product architecture and specifications, typical hardware configuration, engineering survey and hardware installation, software commissioning and testing, acceptance testing, maintenance and troubleshooting. Based on the HCNA examination, HCNP examination add the containts below: basic signaling process of the WCDMA system, the M2000 and CME-related product knowledge, data configuration, software commissioning of site controler, site software upgrades.





WCDMA system architecture ,The basic principle of WCDMA and the wireless network interface

2.

The signaling process of the WCDMA system

59



BSC6900 (WCDMA) system introduction, hardware architecture and product specifications

2.

Typical configuration of BTS3900/DBS3900 (WCDMA),BTS3900/DBS3900 (WCDMA) hardware architecture and module functions

3.

Typical configuration of BTS3900/DBS3900 (MBTS), hardware architecture and module functions

4.

CME configuration tool principles and operational guidance

5.

The M2000 system architecture and operating instructions


2.

Installation design and Engineering survey (product knowledge) 1)

Site Controller and site installation

2)

Engineering survey process of controller

3)

Engineering survey process of site

Hardware Installation 1)

Hardware Installation of site controller

2)

Hardware Installation of site (including feeder system, monitoring, and other peripherals)

Software Conmmissioning 1.

Remote/Local commissioning of the site

2.

Site service testing and site integration

3.

Testing indicators and testing tool

4.

Data configuration(site controller and site)

5.

Software commissioning of the controller

6.

New site integration through M2000


Acceptance of a single-site and hardware installation check

2.

Acceptance process of controller

Software Upgrade 1.

Remote upgrade of the site

2.

Local upgrade of the site


Hardware Replacement

2.

Information collection for controller

3.

Deal with problems on site for controller

4.

On-site emergency recovery for controller

60



3.2.3.6 Participating in the Exam 3.2.3.7 References 3.2.3.8 Recommended Training Program Huawei Certified Network Professional-Huawei WCDMA Technologies and Device BOM

88980027

Training Program

Huawei Certified Network Professional-Huawei WCDMA Technologies and Device

Level

Duration

III

13

61


3.3 CDMA Exam Outline 3.3.1 Introduction of CDMA Exam Outline Certificate

Exam Name

Exam Duration

Exam Name

Exam Code

HCNA-CDMA

HC-035-440-ENU

HCNA-CDMA (Huawei Certified Network Associate-CDMA)

90min

HCNP-CDMA

HC-035-441-ENU

HCNP-CDMA (Huawei Certified Network Professional-CDMA)

90min

Total Score

Pass Score


1000

600


1000

600

Item number

3.3.2 Huawei Certified Network Associate-CDMA Exam Outline 3.3.2.1 Prerequisites No prerequisites.

3.3.2.2 Exam Content Overview CDMA sub-contractors examination involved: cdma2000 1X & 1xEV-DO technology base of knowledge, the technical characteristics and network structure of Trustar digital trunking communication system, the transmission basic priciple and related products hardware basic knowledge , hardware installation skill, basic maintenance knowledge.





cdma2000 1X & 1xEV-DO basic technology (CDMA technology development road signpost、f cdma2000 1X/1xEV-DO technical characteristics and network structure, key technology of cdma2000 1X and UM channel Introduction、EVDO new technologies and UM channel Introduction) ;

2.

The technical characteristics and network architecture of the the Trustar digital

62


trunking communication system ; Product knowledge 1.

BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products(hardware components, the basic configuration rules and board function.);

2.

The meaning of the BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products, the meaning of it’s board indicator light;

3.

BTS3900/BTS36xx series of CDMA base station antenna and feeder cable introduction (basic knowledge of radio waves, the basic principles of antenna radiation of electromagnetic waves, introduced the concept of the antenna transmission cable, the base station antenna and feeder cable systems) ;

4.

The introduction of complementary products (room environment of the project site, the power system , alarm boxes, etc.) ;

5.

The controller and bts products survey content and survey Note;

6.

The bts hardware distribution, delivery rules, methods, understanding Huawei BOQ and the meaning of the packing list;

7.

Controller and base station hardware installation and the Power On Self Test;

Data configuration and commissioning NA

Acceptance Test 1.

The BTS hardware installation quality inspection content and standards;

2.

Grasp the power meter, sitemaster ,test terminal use method;

Chinese Edition adds the following: 1.

The BSC hardware installation quality inspection content and standards;

Maintenance and Troubleshooting 1.

Grasp the replacement method and operation procedure of BSC6680/BSC6600/RAC6610/MSE9830 board、frame etc.

1.

Grasp the replacement method and operation procedure of BTS36xx/39xx serial bts board、BBU etc.

NOTE


3.3.2.6 Participating in the Exam 3.3.2.7 References The exam is delivered by Pearosn VUE authorized test centers.You can register with the

63


nearest test center to take the exam. To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE :http://www.vue.com/vtclocator/

3.3.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei CDMA Technologies and Device BOM

88980028

Training Program

Level

Huawei Certified Network Associate-Huawei CDMA Technologies and Device

II

Duration 7 ～ 7.5 working days （no practice）

3.3.3 Huawei Certified Network Professional-CDMA Exam Outline 3.3.3.1 Prerequisites No prerequisites.

3.3.3.2 Exam Content Overview CDMA sub-contractors examination involved: cdma2000 1X & 1xEV-DO technology base of knowledge, the technical characteristics and network structure of Trustar digital trunking communication system, the transmission basic priciple and related products hardware basic knowledge , hardware installation skill, basic maintenance knowledge,commissioning,acceptance.




64



cdma2000 1X & 1xEV-DO basic technology (CDMA technology development road signpost、f cdma2000 1X/1xEV-DO technical characteristics and network structure, key technology of cdma2000 1X and UM channel Introduction、EVDO new technologies and UM channel Introduction) ;

2.

The technical characteristics and network architecture of the the Trustar digital trunking communication system ;

3.

Grasp transmission fundamentals (TCPIP protocol and subnetting, Ethernet / VLAN / VRRP / Routing Fundamentals) ;


BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products(hardware components, the basic configuration rules and board function.);

2.

The meaning of the BSC6680/BSC6600 / RAC6610/MSE9830 controller and bts products, the meaning of it’s board indicator light;

3.

BTS3900/BTS36xx series of CDMA base station antenna and feeder cable introduction (basic knowledge of radio waves, the basic principles of antenna radiation of electromagnetic waves, introduced the concept of the antenna transmission cable, the base station antenna and feeder cable systems) ;

4.

The introduction of complementary products (room environment of the project site, the power system , alarm boxes, etc.) ;

5.

The controller and bts products survey content and survey Note;

6.

The bts hardware distribution, delivery rules, methods, understanding Huawei BOQ and the meaning of the packing list;

7.

Controller and base station hardware installation and the Power On Self Test;

Data configuration and commissioning 1.

The BTS data and software loading process and methodology;

2.

The BTS data configuration;

3.

The BTS basic commissioning procedure;

4.

The meaning of the BTS of the Engineering Indicators (VSWR, RSSI、output power) and test methods，Finish the BTS troubleshooting and quality inspection under the guidance. ;

5.

The BTS environment alarm configuration, debugging;

6.

IP RAN network form and IPRAN BTS data configuration;

Chinese Edition adds the following 1.

BSC6680 controller internal signals (signaling, traffic) processes procedure, the basic rules of the system configuration;

2.

Operation and maintenance system of BSC6680 (CDMA BSC6680 maintenance

65


system agencies, system networking, maintenance system software structure, the internal IP network, IP address planning) ; 3.

BSC6680 data configuration (the basic configuration of BSC6680 system,, the file loading procedure, the CDMA BSC6680 hardware, clock, interface, cell, carrier, and cdma2000 1X/1xEV-DO business data configuration) ;

4.

BSC6680 signaling procedure(voice, data services, short message, handoff signaling process) ;

5.

The BSC data configuration under IP RAN network;

Acceptance Test 1.

The BTS hardware installation quality inspection content and standards;

2.

The BTS software installation quality inspection content and standards;

3.

Tthe LMT maintenance method of RSSI,VSWR, Transmit power tracing;

4.

Single BTS acceptance range and standard;

5.

Grasp the power meter, sitemaster ,test terminal use method;

6.

The acceptance range and standard of BTS basic characteristics;

Chinese Edition adds the following: 1.

The BSC hardware installation quality inspection content and standards;

2.

The BSC software installation quality inspection content and standards;

3.

The LMT maintenance method of signal tracing;

4.

Single BSC acceptance range and standard;

5.

The acceptance range and standard of BSC basic characteristics;

Maintenance and Troubleshooting 1.

Grasp the replacement method of spare parts, clear procedure key points;

2.

Familiar with some of the commonly used test tools (sitemaster, power meter, test phone, etc.)

3.

Familiar with the daily operation &maintenance of the 36xx/39xx Series BTS and RAC6610/BSC6600/BSC6680 ,basic information collection methods, analysis and process the common fault alarm base on online help;

4.

Grasp MSE9830 board replacement methods, procedure and information collection methods;

5.

To understand the common fault scenarios of the 36xx/39xx Series bts, to grasp the emergency fault information collection and recovery measures, quickly recovery according the guidance;

6.

The use method of FMA tools NOTE


66


3.3.3.6 Participating in the Exam The exam is delivered by Pearosn VUE authorized test centers.You can register with the nearest test center to take the exam. To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE :http://www.vue.com/vtclocator/

3.3.3.7 References 3.3.3.8 Recommended Training Program Huawei Certified Network Professional-Huawei CDMA Technologies and Device BOM

88980029

Training Program

Huawei Certified Network Professional-Huawei CDMA Technologies and Device

Level

III

Duration 5~16 working days （no practice）

67


3.4 Wimax Exam Outline 3.4.1 Introduction of Wimax Exam Outline Certificate

Exam Name

HCNP-Wimax

Exam Code

Exam Name

Exam Duration

HC-035-451-ENU

HCNP-Wimax (Huawei Certified Network Professional-Wimax))

90 min

Item number

Total Score

Pass Score

1000

600


3.4.2 Huawei Certified Network Professional-Wimax Exam Outline 3.4.2.1 Prerequisites No prerequisites.

3.4.2.2 Exam Content Overview The HCNP-Wimax exam covers WiMAX basic description, Wimax hardware description, Wimax commission, Wimax Acceptance. Wimax maintaince




3.4.2.5 Key Points of Exam WiMAX basic description 1.

Describe OFDM/OFDMA Basics

2.

Describe WiMAX Features

3.

Describe WiMAX Applications

4.

Describe WiMAX system networking

WiMAX product description 1.

Describe each board function of DBS3900 WiMAX

68


2.

Complete the inside connection of DBS3900

3.

Describe WiMAX system networking

4.

Outline DBS3900 WiMAX functions

5.

Outline each board function of DBS3900 WiMAX

WiMAX installing description 1.

Describe How to install DBS3900 in site

2.

Describe how to install Antena system

Wimax commission 1.

Finish basic data configuration for WiMAX DBS3900

2.

Describe the two types of commissioning

3.

Perform local commissioning

4.

Perform remote commissioning

Wimax Acceptance 1.

Finish bacis function Acceptance.

2.

Can be done Deriver test

Wimax maintaince 1.

Complete daily maintenance tasks

2.

Can be change board basicly


3.4.2.6 Participating in the Exam 3.4.2.7 References Huawei Certified Wimax Training Courses — WIMAX: Huawei Network Technology and Device (HNTD) Huawei Certified Wimax Training Courses — WIMAX: Guide to Experiments on Huawei Network Technology and Device (HNTD) Huawei product manuals

3.4.2.8 Recommended Training Program HCNP-Wimax (Huawei Certified Network Professional-Huawei Wimax Technologies and Device) Training. BOM 88980030

Training Program

HCNP-Wimax (Huawei Certified Network Professional-Huawei Wimax Technologies and Device) Training.

Level

Duration

II

8

69


3.5 LTE Certification Exam Outline 3.5.1 Introduction of LTE Certification Certificate

Exam Name

Huawei Certified Network Associate - LTE

Huawei Certified Network Professional LTE

Huawei Certified Network Professional EPC

HCNA-LTE

Exam Duration

Exam Code

Exam Name


HCNA-LTE (Huawei Certified Network Associate — LTE)

90 minutes

HC-031-421-ENU

HCNP-LTE (Huawei Certified Network Professional — LTE)

90 minutes

HC-031-431-ENU

HCNP-EPC (Huawei Certified Network Professional — EPC)

90 minutes

HCNP-LTE

HCNP-EPC

Item number 60 multiple-choice questions (single-answer and multiple-answer), true-false questions 60 multiple-choice questions (single-answer and multiple-answer), true-false questions 60 multiple-choice questions (single-answer and multiple-answer), true-false questions

Total Score

Pass Score

1000

600

1000

600

1000

600

3.5.2 Huawei Certified Network Associate — LTE (HCNA-LTE) Exam Outline 3.5.2.1 Prerequisites No prerequisites.

3.5.2.2 Exam Content Overview The HCNA-LTE exam covers LTE system basics such as E-UTRAN/EPC architecture, principles of OFDM/OFDMA/SC-FDMA, EPC basic principles and HUAWEI LTE eNodeB products overview.


3.5.2.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods: Certificate Huawei Certified Network Associate - LTE


70


3.5.2.5 Key Points of Exam LTE System Overview 1.

Evolution of Cellular Networks

2.

3GPP Releases

3.

E-UTRAN Architecture

4.

E-UTRAN Interfaces and Protocols

5.

EPC Architecture

6.

EPC Interfaces and Protocols

7.

Radio Interface Techniques

8.

Principles of OFDM

9.

LTE Channel Structures

10. LTE Frame Structure 11. Downlink OFDMA 12. Uplink SC-FDMA 13. Multiple Input Multiple Output 14. Multimedia Broadcast Multicast Service 15. The Huawei eNodeB family 16. Products and application scenarios 17. Operation and Maintenance EPC Principle 1.

EPC architecture

2.

Function of each node in EPC

3.

The protocol and interface used in EPC (GTP, PMIP, diameter, etc.)

4.

PDN connection

5.

EPC bearers and TFT(s)

6.

Identifiers and legacy IDs

7.

Security mechanisms in EPC

8.

QoS in EPC

9.

The selection function in EPC

10. Attach and detach procedure 11. Tracking area update procedure 12. Handover procedure 13. Bearer activation/modification/deactivation procedure

The exam content provided here serves only as a general guide to candidates. Other basic knowledge not mentioned here may also be included in the actual exam.

3.5.2.6 Participating in the Exam The exam is delivered by Pearosn VUE authorized test centers.You can register with the

71


nearest test center to take the exam. To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE : http://www.vue.com/vtclocator/

3.5.2.7 References <> <> <>

3.5.2.8 Recommended Training Program HCNA-LTE (Huawei Certified Network Associate-LTE) Training. BOM 88980001

Training Program

Level

Duration

II

6 days

Huawei Certified Network Associate-LTE

3.5.3 Huawei Certified Network Professional — LTE (HCNP-LTE) Exam Outline 3.5.3.1 Prerequisites No prerequisites.

3.5.3.2 Exam Content Overview The HCNP-LTE exam covers details principles of LTE air interface such as OFDMA/SC-FDMA/LTE physical layers, LTE protocols and procedures such as EPS interfaces/EPS protocols/RRC layer/RLC layer/MAC layer, HUAWEI LTE eNodeB operation&maintenance/configuration/troubleshooting.


3.5.3.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods: Certificate Huawei Certified Network Professional LTE


72


3.5.3.5 Key Points of Exam LTE Air Interface 1.

Radio Interface Techniques

2.

Transmission Modes

3.

Spectrum Usage

4.

Channel Coding in LTE

5.

Principles of OFDM

6.

LTE Physical Layer

7.

The Uu Interface

8.

LTE Radio Interface Protocols

9.

LTE Channel Structure

10. LTE Frame Structure 11. OFDM Signal Generation 12. Downlink OFDMA 13. LTE Physical Signals 14. Downlink Reference Signals 15. Downlink LTE Physical Channels 16. Downlink Control Signaling 17. LTE Cell Search Procedure 18. Uplink Transmission Technique 19. OFDMA Verses SC-FDMA 20. Uplink LTE Physical Channels 21. Timing Relationships 22. Uplink Reference Signals 23. Uplink Control Signaling 24. LTE Random Access Procedure 25. Uplink Power Control 26. Paging Procedures 27. HARQ Operation 28. Diversity Options 29. Scheduling Principles and Signaling 30. Intra LTE Mobility LTE Protocols and Procedures 1.

EPS Architecture

2.

EPS Network Elements

3.

EPS Interfaces

4.

EPS Protocols

5.

EPS Signaling

6.

EPS Protocols

7.

E-UTRAN Channel Mapping

73


8.

EPS Bearer Services and E-UTRA Radio Bearers

9.

E-UTRA Radio Bearers

10. RRC Structure 11. RRC States 12. RRC Services 13. PDCP Operation 14. RLC Functions 15. RLC Modes and Formatting 16. MAC Functions 17. MAC Architecture 18. MAC Formatting 19. X2AP Functions and Procedures 20. S1AP Functions and Procedures 21. User Plane GTP Functions and Procedures 22. X2 Handover 23. S1 Handover 24. Inter RAT Handover LTE Operation and Configuration 1.

eNodeB System Overview

2.

eNodeB System Structure

3.

eNodeB Auxiliary Devices

4.

eNodeB Typical Networking

5.

Structure of operation and maintenance system

6.

Login eNodeB O&M system

7.

eNodeB equipment management

8.

eNodeB transport management

9.

eNodeB radio management

10. Backup eNodeB configuration file, query eNodeB version 11. Tracing and real time monitoring 12. eNodeB Data Configuration Introduction 13. Preparing eNodeB Data 14. Creating eNodeB Data 15. Adjusting eNodeB Data 16. Checking eNodeB Data 17. eNodeB Commissioning Overview 18. eNodeB Remote Commissioning on the M2000 19. SUMMARY introduction 20. Creating bulk eNodeBs with Summary 21. Checking data

74


LTE Reconfiguration 1.

Adding an FDD Cell

2.

Changing the Cell Bandwidth

3.

Adding an MME Connection

4.

Adding an S-GW Connection

5.

Changing the Cell EARFCNs

6.

Changing the Cell PCI

7.

Changing the Cell ID

8.

Relocating an MME

9.

Relocating an S-GW

LTE Troubleshooting 1.

The procedure of eNodeB troubleshooting flow

2.

The alarm management and analysis

3.

The log collection

4.

The main faults processing of device level

5.

The main faults processing of transport level

6.

The main faults processing of radio level



3.5.3.7 References <> <> <> <> <>

3.5.3.8 Recommended Training Program HCNA-LTE (Huawei Certified Network Associate-LTE) Training.

75

Huawei Certification Exam Outline (Partner) BOM

Training Program

Level

Duration

88980002

Huawei Certified Network Professional-LTE

III

10 days

3.5.4 Huawei Certified Network Professional — EPC (HCNP-EPC) Exam Outline 3.5.4.1 Prerequisites No prerequisites.

3.5.4.2 Exam Content Overview The HCNP-EPC exam covers details of EPC ATCA Platform Routine Operation and Maintenance （USN，HSS）, EPC USN Data Configuration, EPC UGW Routine Operation and Maintenance, EPC UGW Data Configuration, EPC HSS Data Configuration.


3.5.4.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods: Certificate Huawei Certified Network Professional EPC


3.5.4.5 Key Points of Exam EPC ATCA Platform Routine Operation and Maintenance （USN，HSS） 1.

system structure and hardware structure of USN9810

2.

software related installation and upgrade procedure

3.

hardware operation and maintenance

4.

security management

5.

system information management

6.

alarm management

7.

trace management

8.

data management

9.

license management

10. performance management

76


EPC USN Data Configuration 1.

functions of protocol stacks of different interfaces

2.

configuration of USN hardware

3.

S1-MME Interface Data Configuration

4.

S6a Interface Data Configuration

5.

S10S11 Interface Data Configuration

6.

MM SM Data Configuration

EPC UGW Routine Operation and Maintenance 1.

system structure and hardware structure of UGW9811

2.

software related installation and upgrade procedure

3.

hardware operation and maintenance

4.

authorization management

5.

system information management

6.

alarm management

7.

trace management

8.

log management

9.

license management

10. patch management 11. data backup and restore EPC UGW Data Configuration 1.

functions of protocol stacks of different interfaces

2.

UGW9811 S1-U interface data

3.

UGW9811 S11 interface data configuration

4.

UGW9811 S5/S8 interface data

5.

UGW9811 other related interface data configuration

6.

UGW9811 APN data configuration

7.

UGW9811 VPN data configuration.

8.

UGW9811 billing data configuration.

EPC HSS Data Configuration 1.

HSS9820 product function and application

2.

configuration of subscription data

3.

the steps of HSS9820 data configuration

4.

hardware and system data configuration

5.

interface data configuration

6.

basic data configuration steps of USCDB


77



3.5.4.7 References << EPC ATCA Platform Routine Operation and Maintenance（USN，HSS）>> << EPC USN Data Configuration >> << EPC UGW Routine Operation and Maintenance >> << EPC UGW Data Configuration >> << EPC HSS Data Configuration >>

3.5.4.8 Recommended Training Program HCNP-EPC (Huawei Certified Network Professional -EPC) Training. BOM

Training Program

Level

Duration

88980003

Huawei Certified Network Professional-EPC

III

12 days

78


4 RNP&RNO 4.1 GSM RNP&RNO Exam Outline 4.1.1 Introduction of GSM RNP&RNO Exam Outline Certificate

Exam Name

HCNA GSM RNP&RNO

HCNP GSM RNP&RNO

Exam Code

Exam Name

HC-035-510-ENU

HCNA GSM RNP&RNO (Huawei Certified Network Associate-CDMA RNP&RNO)

HC-035-511-ENU

Huawei Certified Network Professional-GSM RNP&RNO

Exam Duration

Item number

Total Score

Pass Score

90min


1000

600

90min


1000

600

4.1.2 Huawei Certified Network Associate-GSM RNP&RNO Exam Outline 4.1.2.1 Prerequisites No prerequisites.

4.1.2.2 Exam Content Overview The HCNA GSM RNP&RNO exam covers: GSM basic theories, wireless transmission principle, telecomunicatios principle, GSM network planning and optimization knowledges.




4.1.2.5 Key Points of Exam Principle 1. Understandable of the GSM basic theories /wireless transmission /telecomunicatios as well as attenna and associated parameters.

79


Planning knowledges 1. Familiar with radio transmission theoretics and the usual transmission model. Optimization knowledges 1. Capable of independently writing the analysis of electromagnetic interference, and providing preliminary resolutions for the target area accordingly. 2. Capable of independently finishing site survey and report upon request. 3. Capable of independently using related tools to survey radio parameters and quality of antenna. 4. Capable of independently accomplishing DT/CQT test (single site verification) by Genex Porbe, analyzing the problems of DT/CQT by Genex Assistant and deliver resolutions accordingly. 5. Capable of dealing with common customer’s complaint by DT/CQT. 6. Familiar with the meaning and adjusting regulations of commonly used Network Design parameterss


4.1.2.6 Participating in the Exam 4.1.2.7 References 4.1.2.8 Recommended Training Program HCNA GSM RNP&RNO (Huawei Certified Network Associate-Huawei GSM RNP&RNO Technologies) BOM 88980031

Training Program

HCNA GSM RNP&RNO (Huawei Certified Network Associate-Huawei GSM RNP&RNO Technologies)

Level

Duration

II

7

4.1.3 Huawei Certified Network Professional-GSM RNP&RNO Exam Outline 4.1.3.1 Prerequisites Have qualifications for HCNA-Huawei GSM RNP&RNO Technologies.

4.1.3.2 Exam Content Overview The HCNP-GSM RNP&RNO exam covers: GSM communication theory, GSM network planning and optimization process, GSM network planning and optimization knowledges.

80






Familiar with GSM communication theory.

2.

Master wireless network planning and optimazition process.

Planning knowledges 1.

Master the GSM coverage planning, capacity planning, neighbor/frequency design, location area design, parameters design and GPRS planning.

2.

Master the related parameters and adjusting regulations of Network Design.

3.

Master the way of CW testing and related data processing.

4.

Master the corrective procedure of transmission model.

Optimization knowledges 1.

Master the RF optimazition & procedure, methods and tools, capable of processing GSM radio network RF optimazition.

2.

Master the definition of traffic statistics and counter point in the wireless side of GSM Network.

3.

Master GSM common KPI analysis and network problem solution, such as drop call, handover, voice quality and data traffic.

4.

Capable of independently completing network optimazition reports and generating problem analysis reports


81


4.1.3.6 Participating in the Exam 4.1.3.7 References 4.1.3.8 Recommended Training Program HCNP-GSM RNO&RNP (Huawei Certified Network Professional-Huawei GSM RNP&RNO Technologies). BOM

Training Program

Level

Duration

88980032

HCNP-GSM RNO&RNP (Huawei Certified Network Professional-Huawei GSM RNP&RNO Technologies).

III

8

82


4.2 WCDMA RNP&RNO Exam Outline 4.2.1 Introduction of WCDMA RNP&RNO Exam Outline Certificate

Exam Name

HCNA WCDMA RNP&RNO

HCNP WCDMA RNP&RNO

Exam Code

Exam Name

HC-035-520-ENU

Huawei Certified Network Associate-WCDMA RNP&RNO

HC-035-521-ENU

Huawei Certified Network Professional-WCDMA RNP&RNO

Exam Duration

Item number

Total Score

Pass Score

90min


1000

600

90min


1000

600

4.2.2 Huawei Certified Network Associate-WCDMA RNP&RNO Exam Outline 4.2.2.1 Prerequisites No prerequisites.

4.2.2.2 Exam Content Overview The HCNA WCDMA RNP&RNO exam covers:WCDMA basic theories, wireless transmission principle, telecommunication principle, WCDMA network planning and optimization knowledges.





Understandable of the WCDMA basic theories, wireless transmission, telecomunications, attenna and associated parameters.


Master antenna selection.

83


2.

Initial grasp of network planning and optimization process, familiar with the site survey, RF Tuning process.

3.

Familiar with the theory of radio propagation and common propagation models.


Independent output electromagnetic interference analysis, and existence of the interference region is given a preliminary settlement proposals.

2.

Be able to independently asked to complete the site investigation and reporting.

3.

Be able to use the tools to verify the wireless working parameters and the quality of the antenna and cable correction.

4.

Be able to independently use the Genex Probe, completion of DT / CQT testing (including single-station verification), Genex Assistant analysis of the problem in the DT / CQT, the output of the corresponding solutions.

5.

Deal with general customer complaints by DT / CQT.

6.

Grasp the road test KPI the meaning and the testing method, independent production test program and complete.

7.

Master the cell parameters to verify the method, familiar with the meaning of the parameters and adjust the basis of the common network rules


4.2.2.6 Participating in the Exam 4.2.2.7 References 4.2.2.8 Recommended Training Program HCNA WCDMA RNP&RNO (Huawei Certified Network Associate-Huawei WCDMA RNP&RNO Technologies). BOM 88980033

Training Program


Level

Duration

II

7

4.2.3 Huawei Certified Network Professional-WCDMA RNP&RNO Exam Outline 4.2.3.1 Prerequisites No prerequisites.

84


4.2.3.2 Exam Content Overview The HCNP-WCDMA RNP&RNO exam covers: WCDMA communication theory, WCDMA network planning and optimization process, WCDMA network planning and optimization knowledges.





Familiar with the WCDMA communication theory.

2.

Master the wireless network planning and optimization process


Master the UMTS coverage planning, capacity planning, and neighbor / frequency planning, LAC planning, scrambling code planning.

2.

Grasp the relevant parameters of the network planning and adjustment of principles.

3.

Grasp the CW test method, the CW test data processing.

4.

Master the propagation model calibration processes, methods


Master the RF optimization of processes, methods, tools, with network RF optimization capabilities.

2.

Master the definition of traffic statistics and counter point in the wireless side of GSM Network.

3.

To master the problems of the common words of WCDMA system KPI analysis and network processing, familiar, then the system KPIs (Access, retention and mobility)optimization method.

4.

Familiar with Huawei UMTS RNC maintenance operations.

5.

Able to independently finish the network optimization reporting and problem analysis report writing


85


4.2.3.6 Participating in the Exam 4.2.3.7 References 4.2.3.8 Recommended Training Program HCNP-WCDMA RNO&RNP (Huawei Certified Network Professional-Huawei WCDMA RNP&RNO Technologies). BOM 88980034

Training Program


Level

Duration

III

11

86


4.3 CDMA RNP&RNO Exam Outline 4.3.1 Introduction of CDMA RNP&RNO Exam Outline Certificate

Exam Name

Exam Code

Exam Name

Exam Duration

HCNA CDMA RNP&RNO

HC-035-540-ENU

Huawei Certified Network Associate-CDMA RNP&RNO

90min

HCNP CDMA RNP&RNO

HC-035-541-ENU

Huawei Certified Network Professional-CDMA RNP&RNO

90min

Item number

Total Score

Pass Score

1000

600

1000

600

60 multiple-choice questions (single-answer and multiple-answer), true-false questions 60 multiple-choice questions (single-answer and multiple-answer), true-false questions

4.3.2 Huawei Certified Network Associate-CDMA RNP&RNO Exam Outline 4.3.2.1 Prerequisites No prerequisites.

4.3.2.2 Exam Content Overview The HCNA CDMA RNP&RNO exam covers: CDMA basic theories, wireless transmission principle, telecommunication principle. CDMA network planning and optimization knowledges.





Understandable of the CDMA basic theories /wireless transmission /telecomunications as well as attenna and associated parameters.


Familiar with radio transmission theoretics and the usual transmission model.

87



Capable of independently writing the analysis of electromagnetic interference, and providing preliminary resolutions for the target area accordingly.

2.

Capable of independently finishing site survey and report upon request.

3.

Capable of independently using related tools to survey radio parameters and quality of antenna.

4.

Capable of independently accomplishing DT/CQT test(single site verification) by Pioneer, analyzing the problems of DT/CQT by Navigator and deliver resolutions accordingly

5.

Capable of dealing with common customer’s complaint by DT/CQT.

6.

Familiar with the meaning and adjusting regulations of commonly used Network Design parameters.


4.3.2.6 Participating in the Exam 4.3.2.7 References 4.3.2.8 Recommended Training Program HCNA CDMA RNP&RNO (Huawei Certified Network Associate-Huawei CDMA RNP&RNO Technologies) Training. BOM 88980035

Training Program

HCNA CDMA RNP&RNO (Huawei Certified Network Associate-Huawei CDMA RNP&RNO Technologies) Training.

Level

Duration

II

8

4.3.3 Huawei Certified Network Professional-CDMA RNP&RNO Exam Outline 4.3.3.1 Prerequisites No prerequisites

4.3.3.2 Exam Content Overview The HCNP CDMA RNP&RNO exam covers: CDMA communication theory, CDMA network planning and optimizationprocess, CDMA network planning optimization knowledges.

88






Familiar with CDMA communication theory.

2.

Master wireless network planning and optimazition process.


Master the elements which impact on coverage and capacity. Familiar with the basic principle of power configuration.

2.

Master the Network structure of multi-trxs , familiar with the theories of PN, LAC and Neighbour design.

3.

Master the way of CW testing and related data processing.

4.

Master the corrective procedure of transmission model.

5.

Master the related parameters and adjusting regulations of Network Design.


Master the RF optimazition & procedure, methods and tools, capable of processing GSM radio network RF optimazition.

2.

Master the definition of traffic statistics and counter point in the wireless side of CDMA Network.

3.

Master CDMA common KPI analysis and network problem solution, such as drop call, handover, voice quality and data traffic .

4.

Familiar with operating on HUA WEI CDMA BSC’s flatform;

5.

Capable of independently completing network optimazition reports and generating problem analysis reports


89


4.3.3.6 Participating in the Exam 4.3.3.7 References 4.3.3.8 Recommended Training Program HCNP-CDMA RNO&RNP (Huawei Certified Network Professional-Huawei CDMA RNP&RNO Technologies). BOM 88980036

Training Program

HCNP-CDMA RNO&RNP (Huawei Certified Network Professional-Huawei CDMA RNP&RNO Technologies).

Level

Duration

III

8

90


4.4 Microwave RNP Exam Outline 4.4.1 Introduction of RNP Exam Outline Certificate

Exam Name

HCNA Microwave RNP

HCNP Microwave RNP

Exam Code

Exam Name

HC-035-550-ENU

Huawei Certified Network Associate-Microwave RNP

HC-035-551-ENU

Huawei Certified Network Professional-Microwave RNP

Exam Duration

90 min

90 min


Total Score

Pass Score

1000

600

1000

600

4.4.2 Huawei Certified Network Associate-Microwave RNP Exam Outline 4.4.2.1 Prerequisites No prerequisites.

4.4.2.2 Exam Content Overview The HCNA-MRNP exam covers Digital microwave communication principle, application of Pathloss, Microwave LOS Survey method and procedure, Fundamentals of Microwave Network Planning and Design.




4.4.2.5 Key Points of Exam Digital Microwave communication principle 1.

The detail of digital microwave and features

2.

The function of microwave components

3.

Common networking scheme and applications scenarios

91


4.

Microwave radiation fundamental and fading description

5.

Various anti-fading technology

6.

Microwave link design procedure and key points

Applications of Pathloss and LOS survey 1.

Basic operation of Pathloss

2.

LOS survey scenarios and evaluation method

3.

LOSsurvey procedure

Networking planning and design 1.

Microwave planning and design knowledege

2.

HUAWEI microwave planning&design procedure



4.4.2.7 References Huawei microwave products manuals(RTN600,RTN900 series)

4.4.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei Microwave RNP Technologies training. BOM 88980037

Training Program

Huawei Certified Network Associate-Huawei Microwave RNP Technologies training.

Level

Duration

II

3

4.4.3 Huawei Certified Network Professional-Microwave RNP Exam Outline 4.4.3.1 Prerequisites No prerequisites.

92


4.4.3.2 Exam Content Overview The HCNP-MRNP exam covers microwave frequency planning,interference analysis， planning and design procedure, and basic Ethernet network knowledge.




4.4.3.5 Key Points of Exam Microwave frequency planning, interference analysis 1.

The meaning of frequency planning

2.

The regulations of microwave selection

3.

Frequency planning by Pathloss

4.

Interference analysis by Pathloss

Microwave networking planning and design 1.

The process of microwave planning and design

2.

Frequency and equipment selection during planning

Datacom knowledge 1.

TCP/IP model

2.

IP address classification and IP route basis

3.

The work mechanism of LAN and WAN

4.

802.1Q and QinQ


4.4.3.6 Participating in the Exam The exam is delivered by Pearosn VUE authorized test centers.You can register with the nearest test center to take the exam. To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE :

93


http://www.vue.com/vtclocator/

4.4.3.7 References Huawei microwave products manuals(RTN600,RTN900 series) 《Digital microwave communication principle》

4.4.3.8 Recommended Training Program Huawei Certified Network Professional-Huawei Microwave RNP Technologies Trainning BOM 88980038

Training Program

Huawei Certified Network Professional-Huawei Microwave RNP Technologies Trainning

Level

Duration

III

3

94


5 Energy&Infrastructure 5.1 Site and Power Exam Outline 5.1.1 Introduction of Site and Power Exam Outline Certificate

Exam Name

HCNA Primary Power System

Exam Code

Exam Name

HC-035-610-ENU

Huawei Certified Network Associate-Primary Power System

Exam Duration

90 min

Item number 60 multiple-choice questions (single-answer and multiple-answer), true-false questions

Total Score

Pass Score

1000

600

5.1.2 Huawei Certified Network Associate-Site and Power Exam Outline 5.1.2.1 Prerequisites No prerequisites.

5.1.2.2 Exam Content Overview The SITE AND POWER SYSTEM exam covers Basic Knowledge of Power Distribution for Telecom Power System, Battery Introduction and Application,ITS1000M and Power3000 product, installation, operations, maintenance, troubleshooting and Neteco knowledge.




5.1.2.5 Key Points of Exam Basic Knowledge of Power Distribution for Telecom Power System 1.

Basic Concepts about Power Distribution

2.

Low-Voltage Electrical Devices

3.

Power Distribution design inside the Power System

4.

Power Distribution products description

95


Battery Introduction and Application 1.

Battery Brief introduction

2.

Battery Terms

3.

Battery Application Selection

4.

Battery Operation and Maintenance


ITS1000M and Power3000 product features

2.

ITS1000M and Power3000 operations, maintenance and troubleshooting



5.1.2.7 References Huawei product manuals

5.1.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei Primary Power System Technologies and Device Training BOM 88980039

Training Program


Level

Duration

II

9

96


5.2 Hybrid Power Supply Exam Outline 5.2.1 Introduction of Hybrid Power Supply Exam Outline Certificate

Exam Name

HCNA Hybrid Power Supply

Exam Duration

Exam Code

Exam Name

HC-035-620-ENU

Huawei Certified Network Associate-Hybrid Power Supply

90 min

Item number 60 multiple-choice questions (single-answer and multiple-answer), true-false questions

Total Score

Pass Score

1000

600

5.2.2 Huawei Certified Network Associate-Hybrid Power Supply Exam Outline 5.2.2.1 Prerequisites No prerequisites.

5.2.2.2 Exam Content Overview The HYBRID POWER SUPPLY exam covers Basic Knowledge of Power Distribution for Telecom Power System, Training for the Diesel Generator Set, Power1000 and Power2000 product, installation, operations, maintenance, troubleshooting and Neteco knowledge..




5.2.2.5 Key Points of Exam Basic Knowledge of Power Distribution for Telecom Power System 1.

Basic Concepts about Power Distribution

2.

Low-Voltage Electrical Devices

3.

Power Distribution design inside the Power System

4.

Power Distribution products description

Training for the Diesel Generator Set 1.

D&G System Introduction

97


2.

D&G Installation and Commissioning

3.

D&G Maintenance,

4.

D&G Troubleshooting

5.

D&G Onsite Operation


Power1000 and Power2000 product features

2.

Power1000 and Power2000 operations, maintenance and troubleshooting



5.2.2.7 References Huawei product manuals

5.2.2.8 Recommended Training Program Huawei Certified Network Associate-Huawei Hybrid Power Supply Technologies and Device Traing BOM 88980040

Training Program


Level

Duration

II

9

98


6 Cloud 6.1

Cloud Computing Certification Exam Outline

6.1.1 Introduction of Cloud Computing Certification Certificate

Exam Name

Huawei Certified Network Associate Cloud

HCNA HCTD

Exam Code

Exam Name

HC-031-511-ENU

HCNA-HCTD (Huawei Certified Network Associate-Huawei Cloud Technologies and Device)

Exam Duration

Item number

Total Score

Pass Score

90 min


1000

600

6.1.2 Huawei Certified Network Associate-Huawei Cloud Technologies and Device (HCNA-HCTD) Exam Outline 6.1.2.1 Prerequisites No prerequisites.

6.1.2.2 Exam Content Overview The HCNA-HCTD exam covers IT Foundation for Cloud Computing, Fundamentals of Cloud Computing and Desktop Cloud Administration. Candidates who successfully pass the exam will have the knowledge and capability to perform the revelant tasks for SingleCLOUD products


6.1.2.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods: Certificate Huawei Certified Network Professional Cloud


6.1.2.5 Key Points of Exam IT Foundation for Cloud Computing 1. Describe Active Directory Service. 2. Describe Dynamic Host Configuration Protocol. 3. Describe Domain Name Service.

99


4. 5. 6. 7. 8. 9. 10.

Describe the Linux File System Structure. Performing Linux Directory Operations. Performing Linux File Operations. Administering User Account. Performing System Resources Management. Performing Basic Network Configuration. Describe the hierarchical structure of an IP network and the functions of each layerDatacom basics

Fundamentals of Cloud Computing 1. Describe Cloud Computing Use Cases. 2. Describe Cloud Computing Key Characteristics. 3. Describe the Basic Concepts of Server Virtualization. 4. Describe the Basic Concepts of Network Virtualization. 5. Describe the Basic Concepts of Storage Virtualization. 6. Describe the Basic Concepts of Cloud Storage. 7. Identify the Storage Access Protocols. 8. Describe the RAID Features. 9. Describe Backup and High Availability for Storage Desktop Cloud Administration 1. Describe the Position of Galax in SingleCLOUD. 2. Describe the Components of Galax. 3. Describe the Features of Galax. 4. Describe the Server Architecture. 5. Describe the Server PCBs. 6. Describe the Server Switch PCB. 7. Describe the Server Management PCB. 8. Describe the Features of Server. 9. Describe the Features of Storage Product. 10. Describe the Storage Architecture. 11. Describe the Storage Specification. 12. Describe the Features of Switch Product. 13. Describe the Switch Architecture. 14. Describe the Switch Specification. 15. Describe Galax8800 Operating System. 16. Performing System Login. 17. Performing System Management. 18. Performing Server Management. 19. Performing System Configuration. 20. Performing Virtualization Operations. 21. Viewing System Message. 22. Viewing System Alert. 23. Viewing System Log. 24. Understand the Management Port Features. 25. Performing Common Management Tasks. 26. Understand OceanStor Management Port Features. 27. Understand OceanStor Management Features. 28. Performing Common OceanStor Management Tasks. 29. Understand Switch Management Port Features. 30. Understand Switch Management Features.

100


31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42.

Performing Common Switch Management Tasks. Describe VDesktop6000 networking. Describe VDesktop6000 structure and functions. Describe VDesktop6000 service flow. Perform VDesktop6000 count management. Perform VDesktop6000 asset management. Perform VDesktop6000 DDC management. Perform VDesktop6000 system backup. Perform VDesktop6000 performance management. Describe TCs Terminal Types. Describe TCs Characteristics. Understand TC Configuration and Management.


6.1.2.6 Participating in the Exam The exam is delivered by Pearosn VUE authorized test centers.You can register with the nearest test center to take the exam.To find the Pearosn VUE authorized test centers, please log on the homepage of the Pearson VUE : http://www.vue.com/vtclocator/

6.1.2.7 References Huawei SingleCLOUD VDesktop6000 Product Documentation, V100R002C01 Other Huawei SingleCLOUD product manuals


Training Program

Level

Duration

88996127

IT Foundation for Cloud Computing Training

I

2 days

88996126

Fundamentals of Cloud Computing Training

I

2 days

88996129

Desktop Cloud Administration Training

II

5 days

101


7 Telecom Design and Implementation 7.1 Telecom Survey and Design Exam Outline 7.1.1 Introduction of Telecom Survey and Design Exam Outline Certificate

Exam Name

Exam Code

Exam Name

Exam Duration

Item number

Total Score

Pass Score

HCNA Telecommunication Equipment Survey

HC-035-810-ENU

Huawei Certified Network Associate-Telecommunication equipment survey

90 min

60

1000

600

7.1.2 Huawei Certified Network Associate-Telecom Survey and Design Exam Outline 7.1.2.1 Prerequisites No prerequisites.

7.1.2.2 Exam Content Overview The SURVEY exam covers the skills and procedure of Huawei products survey.




7.1.2.5 Key Points of Exam The process of survey and basic knowledge of telecom Survey knowledge of core network products 1.

Hardware structure and networking of core network products

2.

Survey knowledge of core network products

Survey knowledge of wireless products 1.

Hardware structure and networking of wireless products

2.

Survey knowledge of wireless products

102


Survey knowledge of network products 1.

Hardware structure and networking of network products

2.

Survey knowledge of network products


7.1.2.6 Participating in the Exam The examination is published by Pearson VUE Authorized Test Center. You can select the nearest Pearson VUE Authorized Test Center Application and take the test. For inquiries authorized test center information, please visit: http://www.pearsonvue.com.cn

7.1.2.7 References Survey guide of Huawei products Templates of survey reports Installation manuals of Huawei products

7.1.2.8 Recommended Training Program Huawei Certified Network Associate-Telecommunication Equipment Survey Technologies Training BOM

88980041

Training Program

Huawei Certified Network Associate-Telecommunication Equipment Survey Technologies Training

Level

Duration

II

3

103


7.2 Hardware Installation Supervision (excluding RF products) 7.2.1 Introduction of Enterprise Communiation Exam Outline Certificate

Exam Name

Hardware Installation Supervision (excluding RF products)

Exam Code

Exam Name

HC-035-820-ENU

Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products)

Exam Duration

Item number

Total Score

Pass Score

90minutes

60 questions (multiple-choices with single answer, multiple-choices with multiple answers, or true/false question)

1000

600

7.2.2 Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products) 7.2.2.1 Prerequisites No prerequisites.

7.2.2.2 Exam Content Overview The test involves basic theories about hardware. And the following subjects should be mastered: 1)

Introduction to EHS management during engineering delivery

2)

Telecom installation specifications

3)

Specifications on common tools and wireless products installation

4)

Required knowledge about installability

5)

User guide for common tools of communication project

6)

MA5600 hardware installation guide (multimedia material)

7)

SOP of OptiX OSN 3500

8)

Guide to core network UMG8900 cabinet cascaded optical fiber installation

9)

Core network hardware installation training

10) Specifications on installing and laying out cables 11) Cable connector production


7.2.2.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods:

104


Certificate



Master the principles and methods of hardware installation, and be skilled in making various cables.


Hardware structure, features, and specifications of the products, material categories, and the use of common instruments and tools

Instruments and Tools 1.

Features and usage of instruments and tools

Quality Abnormality Handling 1.

Master the quality verification of hardware installation and know how to handle quality issues.

7.2.2.6 Participating in the Exam This test is released by Pearson VUE Authorized Test Center. Candidates can choose the nearest Pearson VUE Authorized Test Center to sign in and take the test. Please log in to the following website for information about the authorized test center: http://www.pearsonvue.com.cn

7.2.2.7 Reference 1)


2)


3)


4)


5)

User guide for common tools of communication project

6)

MA5600 hardware installation guide

7)

SOP of OptiX OSN 3500

8)

Guide to core network UMG8900 cabinet cascaded optical fiber installation (2008.05.20)

9)

Core network hardware installation training

10) Specifications on installing and laying out cables 11) Cable connector production

105


The document just provides a general guidance for candidates; therefore, the test may cover other contents not mentioned in this document.


Training Program

Level

Duration

88980042

Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products) Training

II

5

106


7.3 Huawei Certified Network Professional -Hardware Installation Supervision (including RF products) 7.3.1 Introduction of Enterprise Communiation Exam Outline Certificate

Exam Name Hardware Installation Supervision (excluding RF products)

Exam Code

Exam Name

HC-035-820-ENU

Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products)

Exam Duration

Item number

Total Score

Pass Score

90minutes

60 questions (multiple-choices with single answer, multiple-choices with multiple answers, or true/false question)

1000

600

7.3.2 Huawei Certified Network Professional-Hardware Installation Supervision (including RF products) 7.3.2.1 Requirement for Candidates No prerequisites.

7.3.2.2 Description of Test Content The test involves basic theories about hardware. And the following subjects should be mastered: 1)


2)


3)

Introduction to telecommunications room environment

4)


5)


6)

Introduction to common instruments and tools

7)

BTS3900 hardware architecture and principle

8)

DBS3900 hardware architecture and principle

9)

Antenna and feeder system installation (Chinese video)

10) Quick installation guide to base station swap V1.0 11) Multimedia training material of tower installation 12) Specifications on installing and laying out cables 13) Training materials for making cable connectors (outdoor) 14) Microwave product installation and commissioning 15) Work instructions for the delivery of microwave co-base stations


7.3.2.4 Re-certification Methods Before your certification expires, you should re-certify with the following methods:

107

Huawei Certification Exam Outline (Partner) Certificate


7.3.2.5 Test Points Principle 1.

Master the principles and methods of hardware installation, and be skilled in making various cables.


Familiar with the special installation requirements for different scenarios and products

Quality Abnormality Handling 1.

Master the quality verification of hardware installation and know how to handle quality issues.

7.3.2.6 Test Participation This test is released by Pearson VUE Authorized Test Center. Candidates can choose the nearest Pearson VUE Authorized Test Center to sign in and take the test. Please log in to the following website for information about the authorized test center: http://www.pearsonvue.com.cn

7.3.2.7 Reference 1)


2)

Introduction to telecommunications room environment

3)


4)


5)


6)

Introduction to common instruments and tools

7)

BTS3900 hardware architecture and principle

8)

DBS3900 hardware architecture and principle

9)

Antenna and feeder system installation (Chinese video)

10) Quick installation guide to base station swap V1.0 11) Multimedia training material of tower installation 12) Specifications on installing and laying out cables 13) Training materials for making cable connectors (outdoor) 14) Microwave product installation and commissioning 15) Work instructions for the delivery of microwave co-base stations

108

Huawei Certification Exam Outline (Partner) The document just provides a general guidance for candidates; therefore, the test may cover other contents not mentioned in this document.


Training Program

Level

Duration

88980043

Huawei Certified Network Associate-Hardware Installation Supervision (including RF products) Training

II

6

7.4 Huawei Certified-ODN Design Exam Outline 7.4.1 ODN Design Certification Exam Introduction

Certification Program

ODN Design

Exam Code

Exam Name

HC-035-850-ENU

Huawei Certified-ODN Design Engineer

Exam Duration

Item number

Total Score

Pass Score

90 min


1000

600

7.4.2 ODN Design Exam Outline

7.4.2.1 Prerequisites No prerequisites.

7.4.2.2 Exam Content Overview The ODN Design exam covers Introduction to the GPON Technology, Presentation to ODN Products, ODN Survey, ODN Design, ODN Design Review, Optical Cable Product Description, Optical Splitting Strategy, ODN Topology and Cable Route Design Criteria, OLT Capacity and Coverage Design Principle and ODN Design for FTTx Customer.




109


7.4.2.5 Key Points of Exam Introduction to the GPON Technology 1. GPON development background and concept; 2. Optical network architecture; 3. GPON protocols; 4. The key technology of GPON; Presentation to ODN Products 1. ODN product function modules; 2. ODN cabinet and box key technologies; 3. ODN identifier system; ODN Survey 1. The basic workflow of ODN survey; 2. The basic methods of ODN survey; 3. The precautions of ODN survey; ODN Design 1. The common solutions of ODN; 2. Input and output content of ODN design; 3. Workflow of ODN design; 4. Methods of ODN design; 5. Principles of ODN design; 6. Key points of ODN design; ODN Design Review 1. The various components of ODN design; 2. Methods of how to review ODN design; 3. Key points and precautions of how to review ODNdesign; Optical Cable Product Description 1. Different types of fiber optic cable applications; 2. The basic structure of the fiber optic cable; 3. Markers of different types of fiber optic cable; 4. The cable selection methods in different scenarios; Optical Splitting Strategy 1. The characteristics of one-stage and two-stage splitting; 2. How to determine the splitting level according to different environment; 3. Laying position of the splitter; 4. The use of uneven splitter; 5. The best one-stage or two-stage splitting solution in the special scenarios; ODN Topology and Cable Route Design Criteria 1. The common optical network topology; 2. Network topology classification and characteristics of each; 3. The optical cable route design standards; 4. Device location selection methods;

110


OLT Capacity and Coverage Design Principle 1. The calculation methods of OLT capacity and coverage area ; 2. The bandwidth requirements of different services; 3. The Optical link loss calculation method; ODN Design for FTTx Customer 1. ODN common solutions; 2. The basic structure of the optical access network; 3. The classification of different types of users; 4. The different bandwidth requirements of the business; 5. The ODN user-based design; The exam content provided here serves only as a general guide to candidates. Other contents not mentioned here may also be included in the actual exam.


7.4.2.7 References 《FTTx PON Technology and Testing》《Optical Access Network Planning and Design Manual》《FTTx PON Technology and Application》《Communication Lines Engineering》

7.4.2.8 Recommended Training Program Huawei Certified-ODN Design Huawei Certified-ODN Implementation

7.5 Huawei Certified-ODN Implementation Exam Outline 7.5.1 ODN Implementation Certification Exam Introduction

111

Huawei Certification Exam Outline (Partner) Certification Program

ODN Implementation

Exam Code

Exam Name

HC-035-855-ENU

Huawei Certified-ODN Implementation engineer

Exam Duration

Item number

Total Score

Pass Score

90 min


1000

600

7.5.2 ODN Implementation Exam Outline


7.5.2.2 Exam Content Overview The ODN Implementation exam covers Introduction to the GPON Technology, Presentation to ODN Products, ODN Implementation, ODN Test, Optical Cable Product Description, ODN Topology and Cable Route Design Criteria, Application of the Fiber-blowing Technique in FTTx Projects, Application of the Micro Trench Technique in FTTx Projects, Training on Duct Fiber Optical Cable Engineering and Training on Aerial Fiber Optical Cable Engineering.




7.5.2.5 Key Points of Exam Introduction to the GPON Technology 1. GPON development background and concept; 2. Optical network architecture; 3. GPON protocols; 4. The key technology of GPON; Presentation to ODN Products 1. ODN product function modules;

112


2. 3.

ODN cabinet and box key technologies; ODN identifier system;

ODN Implementation 1. FTTX implementation workflow; 2. Optical cable laying; 3. Branch and connection of optical cable; 4. Equipment installation; ODN Test 1. The ODN testing tools; 2. The critical physical parameters of ODN testing; 3. The ODN testing workflow; Optical Cable Product Description 1. Different types of fiber optic cable applications; 2. The basic structure of the fiber optic cable; 3. Markers of different types of fiber optic cable; 4. The cable selection methods in different scenarios; ODN Topology and Cable Route Design Criteria 1. The common optical network topology; 2. Network topology classification and characteristics of each; 3. The optical cable route design standards; 4. Device location selection methods; Application of the Fiber-blowing Technique in FTTx Projects 1. Fiber-blowing technology; 2. Equipment and materials of fiber-blowing ; Application of the Micro Trench Technique in FTTx Projects 1. Micro-trenching technology; 2. Applications of micro-trenching technology; Training on Duct Fiber Optical Cable Engineering 1. Duct optical cable enginerring implementation; 2. Materials and tools of duct optical cable engineering; 3. Construction process and techniques of duct optical cable engineering; 4. Testing and acceptance of duct optical cable engineering; Training on Aerial Fiber Optical Cable Engineering 1. Aerial optical cable enginerring implementation; 2. Materials and tools of aerial optical cable engineering; 3. Construction process and techniques of aerial optical cable engineering; 4. Testing and acceptance of aerial optical cable engineering;


7.5.2.6 Participating in the Exam The exam is delivered by Pearosn VUE authorized test centers.You can register with the nearest test center to take the exam.

113


To find the Pearosn VUE authorized test centers. , please log on the homepage of the Pearson VUE : http://www.vue.com/vtclocator/

7.5.2.7 References 《FTTx PON Technology and Testing》《Optical Access Network Planning and Design Manual》《FTTx PON Technology and Application》《Communication Lines Engineering》

7.5.2.8 Recommended Training Program Huawei Certified-ODN Design Huawei Certified-ODN Implementation

7.6 Huawei Certified-OSP Design Exam Outline 7.6.1 OSP Design Exam Introduction


OSP Design

Exam Code

Exam Name

HC-035-840-ENU

Huawei Certified-OSP Design Engineer

Exam Duration

Item number

Total Score

Pass Score

90 min


1000

600

7.6.2 OSP Design Exam Exam Outline


7.6.2.2 Exam Content Overview The HC-OD exam covers optical communication principles, knowledge about optical transmission network, knowledge about optical fiber and optical cable, picking proper

114


optical fiber type for engineering construction, knowledge about principles for choosing optical cable route, preventive and protective measures for optical calbe line, basic knowledge about optical cable engineering construction.

7.6.2.3 7.6.2.4 Exam results valid period This exam result is valid for 3 years.



7.6.2.6 Key Points of Exam Optical fiber 1. The basic knowledge of optical fiber communication 2. The sorting and basic structure of optical fiber 3. The basic knowledge of optical fiber 4. The manufacture method of optical fiber Optical cable 1. The basic knowledge of optical cable 2. The designing and structure of optical cable 3. Sort about optical cable 4. The choice of optical fiber type 5. The performance and test of optical cable Design 1. The basic knowledge of optical fiber communication 2. Survey and design of direct buried optical cable engineering 3. Survey and design of Pipe optical fiber cable engineering 4. Survey and design of aerial optical fiber cable engineering 5. OSP technical proposal Construction 1. Re-checking route 2. Checking single-drum optical cables and equipment 3. Making a project implementation plan 4. Route construction 5. Loading/unloading and transporting optical cables 6. Distributing and laying optical cables 7. Jointing and leading-in of optical cables and construction test 8. Transmission feature test of the optical repeating section

115


9. 10.

Preparing completion documents Project acceptance



7.6.2.8 References Huawei Certified OSP Design Courses —Optical Cable Engineering Plan and Design Huawei Certified OSP Design Courses —Guide to Outdoor Optical Cable Engineering Optical Fiber Communications Optical Cable Product Manuals

7.6.2.9 Recommended Training Program HC-OI (Huawei Certified –OSP Implementation) Training.

7.7 Huawei Certified-OSP Implementation Exam Outline 7.7.1 OSP Implementation Exam Introduction


OSP Implementation

Exam Code

Exam Name

HC-035-845-ENU

Huawei Certified-OSP Implementation Engineer

Exam Duration

Item number

Total Score

Pass Score

90 min


1000

600

116


7.7.2 OSP Implementation Exam Outline 7.7.2.1 Prerequisites No prerequisites.

7.7.2.2 Exam Content Overview The HC-OD exam covers optical communication principles, knowledge about optical transmission network, knowledge about optical fiber and optical cable, picking proper optical fiber type for engineering construction, knowledge about principles for choosing optical cable route, preventive and protective measures for optical calbe line, basic knowledge about optical cable engineering construction, Be familiar with fusion and mechanical splice methods; knowledge about making use of optical cable fusion splicer and mechanical splicer to connect optical cable;




7.7.2.5 Key Points of Exam Optical fiber 1. The basic knowledge of optical fiber communication 2. The sorting and basic structure of optical fiber 3. The basic knowledge of optical fiber 4. The manufacture method of optical fiber Optical cable 1. The basic knowledge of optical cable 2. The designing and structure of optical cable 3. Sort about optical cable 4. The choice of optical fiber type 5. The performance and test of optical cable

117


Design 1. The basic knowledge of optical fiber communication 2. Survey and design of direct buried optical cable engineering 3. Survey and design of Pipe optical fiber cable engineering 4. Survey and design of aerial optical fiber cable engineering 5. OSP technical proposal Construction 1. Re-checking route 2. Checking single-drum optical cables and equipment 3. Making a project implementation plan 4. Route construction 5. Loading/unloading and transporting optical cables 6. Distributing and laying optical cables 7. Jointing and leading-in of optical cables and construction test 8. Transmission feature test of the optical repeating section 9. Preparing completion documents 10. Project acceptance



7.7.2.7 References Huawei Certified OSP Design Courses —Optical Cable Implementation Engineering Huawei Certified OSP Implementation Courses —Guide to Outdoor Optical Cable Implementation Engineering Optical Fiber Communications Optical Cable Product Manuals

7.7.2.8 Recommended Training Program HC-OI (Huawei Certified –OSP Implementation) Training.

118


7.8 Huawei Certified-Site Civil Work Implementation Exam Outline 7.8.1 Site Civil Work Implementation Exam Introduction


Site Civil Work Implementation

Exam Code

Exam Name

HC-035-835-ENU

Huawei Certified- Site Civil Work Implementation engineer

Exam Duration

Item number

Total Score

Pass Score

90 min


1000

600

7.8.2 Site Civil Work Implementation Exam Outline


7.8.2.2 Exam Content Overview The site design exam covers basically on Site Civil Work Implementation. It also contains site survey and design procedure, Huawei site business service solutions, etc.




7.8.2.5 Key Points of Exam Civil work implementation 1. Telecom Site Construction Introduction 2. Site lightning protection, Shelter, Tower Foundation, Power System implementation

119


3. 4.

Civil Works Quality Mangement and acceptance Site Construction Safety



7.8.2.7 References

#

Ref.

1

Telecom Site Construction Introduction (video)

2

Guide to Building Huawei Wireless Sites Lightning Protection and Grounding System

3

Guide to Building Huawei Wireless Sites Shelter and Air Conditioner Installation

4

Guide to Building Huawei Wireless Sites Tower Foundation and Installation

5

Guide to Building Huawei Wireless Sites Equipment Civil Engineering and Enclosing Wall Installation

6

Guide to Building Huawei Wireless Sites Power System Installation

7

Site Construction Project Acceptance1

8

Site Construction Safety Guide

9

Civil Works Quality Mangement Manual V1.0

7.8.2.8 Recommended Training Program Huawei Certified -Site Civil Work Implementation Training.

7.9 Huawei Certified-Site Design Exam Outline 7.9.1 Site Design Certification Exam Introduction

120

Huawei Certification Exam Outline (Partner) Certification Program

Site Design

Exam Code

Exam Name

HC-035-830-ENU

Huawei Certified-Site Design engineer

Exam Duration

Item number

Total Score

Pass Score

90 min


1000

600

7.9.2 Site Design Exam Outline


7.9.2.2 Exam Content Overview The site design exam covers basically on 3 modules of knowledge, telecom survey & design, civil work survey & design, .and electrical design. It also contains site survey and design procedure, Huawei site business service solutions, etc.




7.9.2.5 Key Points of Exam Telecom survey & design 1. General telecom survey & design key elements 2. Survey & design knowledge on radio network products Civil work survey & design 1. Introduction of towr structure and foundation 2. Introduction of Site civil work design Site electrical design 1. Electrical deisgn for radio site 2. Lightning protection and earthing design

121




7.9.2.7 References

#

Ref.

1

Survey Design Services

2

GULM Wireless Base Station Survey

3

The Design of the Tower Structure and Foundation

4

Brief Instruction of Site Civil Structure Design

5

Detailed Design Process for Wireless Sites

6 7 8

Typical Wireless Site Model Configuration and Design Power Distributing System Design Lightning Protection and Earthing Solution for Base Station

9

Site_New_Build_Service_Technical_Proposal

10

Huawei Site Modernization Technical Proposal

7.9.2.8 Recommended Training Program Huawei Certified -Site Design Training.

122


8 Service Delivery flow and Skill 8.1 Maintenance flow and Skill(for MS area Manager and Field Maintenance Leader) 8.1.1 HCNA- Maintenance flow and Skill subcontractor test 8.1.1.1 introduction Certification Program

HCNAMaintenance flow and Skill

Exam Code

HC-03 5-120ENU

Exam Name

Huawei Certified Network Associate-Mainten ance flow and Skill

Exam Duration

Item number

Total Score

Pass Score

90min


1000

600

8.1.2 HCNA- Maintenance flow and Skill Exam Outline 8.1.1.2 Prerequisites The examination to the examinee no specific requirements。(Here the examination requirements is to point to, the examinee should have before the exam the capacity requirements or qualification requirements, such as intermediate before exams, whether to need to have primary certificate, or requirements in some specific training, etc)

8.1.1.3 Exam Content Overview Maintenance sub-contractors examination involved:

Basic service regulations, Basic process

knowledge, Basic on-site service guide.

8.1.1.4 Key Points of Exam Service regulations 1.

Equipment Room Safety Management Regulations

2.

Shift and Shift Relief Regulations

3.

Equipment Owner Regulations

4.

Regulations for Important Communication Insurance and

5.

Regulations for Network Equipment Operation Security

6.

Regulations for Document Material Management

7.

Regulations for Spare Part, Instrument, Meter, and Tool Management

8.

Test Regulations

9.

Data Backup Regulations

10. Confidentiality Regulations 11. Troubleshooting and Report Regulations

123


Process knowledge 1.

corrective service knowledge point

2.

Preventive service knowledge point

3.

Help desk knowledge point

4.

Spare part knowledge point

On-site service guide 1.

Preventive Maintenance guide

2.

Site Refueling Management guide

Attention please： The exam content provided here serves only as a general guide to candidates. Other contents not mentioned here may also be included in the actual exam.

8.1.1.5 Participating in the Exam 8.1.1.6 References Huawei_Managed_Service_Network_Operation_and_Maintenance_Guide_(Common_Volume)_V1.0

8.2 Training flow and Skill 8.2.1 HCNA- Maintenance flow and Skill subcontractor test introduction Certificati on Program

Exam Code

Exam Name

HCNAMaintenan ce flow and Skill

HC-035-1 20-ENU

Huawei Certified Network Associate-Maintenan ce flow and Skill

Exam Duration

Item number

Total Score

Pass Score

90min


1000

600

8.2.2 HCNA- Maintenance flow and Skill Exam Outline 8.2.2.1 Prerequisites The examination to the examinee no specific requirements。(Here the examination requirements is to point to, the examinee should have before the exam the capacity requirements or qualification requirements, such as intermediate before exams, whether to need to have primary certificate, or requirements in some specific training, etc)

124


8.2.2.2 Exam Content Overview Maintenance sub-contractors examination involved:

Basic service regulations, Basic process

knowledge, Basic on-site service guide.

8.2.2.3 Key Points of Exam Service regulations 1.

Equipment Room Safety Management Regulations

2.

Shift and Shift Relief Regulations

3.

Equipment Owner Regulations

4.

Regulations for Important Communication Insurance and

5.

Regulations for Network Equipment Operation Security

6.

Regulations for Document Material Management

7.

Regulations for Spare Part, Instrument, Meter, and Tool Management

8.

Test Regulations

9.

Data Backup Regulations

10. Confidentiality Regulations 11. Troubleshooting and Report Regulations

Process knowledge 1.

corrective service knowledge point

2.

Preventive service knowledge point

3.

Help desk knowledge point

4.

Spare part knowledge point

On-site service guide 1.

Preventive Maintenance guide

2.

Site Refueling Management guide

Attention please： The exam content provided here serves only as a general guide to candidates. Other contents not mentioned here may also be included in the actual exam.

8.2.2.4 Participating in the Exam 8.2.2.5 References Huawei_Managed_Service_Network_Operation_and_Maintenance_Guide_(Common_Volume)_V1.0

125

2013-Huawei Certification-Exam Outline (Partner) V2 2

Recommend Documents