2011 Isometric Drawing Training .doc

SmartPlant 3D Isometrics Practice Labs

Copyright Copyright © 2008 Intergraph Corporation. All All Rights Reserved. Including software, file formats, and audiovisual displays may !e used pursuant to applica!le software license agreement contains confidential and proprietary information of Intergraph and"or third parties which is protected !y copyright law, trade secret law, and international international treaty, and may not !e provided or otherwise made availa!le without proper authori#ation.

Restricted Rights Legend $se, duplication, or disclosure !y the %overnment is su!&ect to restrictions as set forth in su!paragraph 'c( of the Contractor Rights in Technical Data clause Data clause at )*AR+ )*AR+ 22.22--0/, su!paragraph '!( of the Rights the Rights in Computer Computer Software or Computer Software Documentation clause at )*AR+ )*AR+ 22.22--0/1, su!paragraphs '!('/( and '2( of the License the License clause clause at )*AR+ )*AR+ 22.22--0/, or su!paragraphs 'c( '/( and '2( of Commercial Computer Software-- Restricted Rights Rights at 18 C*R 2.22-/, as applica!le. $npu!lishedrights $npu!lishedrights reserved under the copyright laws of the $nited +tates. Intergraph Corporation 3untsville, Ala!ama 81000/

Warranties and Liabilities All warranties given !y Intergraph Corporation a!out e4uipment or software are set forth in your purchase contract, and nothing stated in, or implied !y, this document or its contents shall !e considered or deemed a modification or amendment of such warranties. Intergraph Intergraph !elieves the information in this pu!lication is accurate as of its pu!lication date. date. 5he information and the software discussed in this document are su!&ect to change without notice and are su!&ect to applica!le technical product descriptions. descriptions. Intergraph Corporation is not responsi!le for any error that may appear in this document. 5he software discussed in this document is furnished under a license and may !e used or copied only in accordance with the terms of this license. 6o responsi!ility responsi!ility is assumed !y Intergraph Intergraph for the use or relia!ility of software on e4uipment e4uipment that is is not supplied !y Intergraph or its affiliated companies. 537 $+7R * 537 +*59AR7 I+ 7:;7C57) 5 7?A>$A5 7?A>$A5I6 I6 A+ 5 537 $+7*$>67++ * 537 +*59AR7 +*59AR7 I6 3I+ 96 76?IR6<765.

Trademarks Intergraph, the Intergraph logo, ;)+, +mart;lant, *rame9or@s, IConvert, I7port, I+@etch, Intelli+hip, I6tools, I+%76, %76, +upport
Copyright Copyright © 2008 Intergraph Corporation. All All Rights Reserved. Including software, file formats, and audiovisual displays may !e used pursuant to applica!le software license agreement contains confidential and proprietary information of Intergraph and"or third parties which is protected !y copyright law, trade secret law, and international international treaty, and may not !e provided or otherwise made availa!le without proper authori#ation.

Restricted Rights Legend $se, duplication, or disclosure !y the %overnment is su!&ect to restrictions as set forth in su!paragraph 'c( of the Contractor Rights in Technical Data clause Data clause at )*AR+ )*AR+ 22.22--0/, su!paragraph '!( of the Rights the Rights in Computer Computer Software or Computer Software Documentation clause at )*AR+ )*AR+ 22.22--0/1, su!paragraphs '!('/( and '2( of the License the License clause clause at )*AR+ )*AR+ 22.22--0/, or su!paragraphs 'c( '/( and '2( of Commercial Computer Software-- Restricted Rights Rights at 18 C*R 2.22-/, as applica!le. $npu!lishedrights $npu!lishedrights reserved under the copyright laws of the $nited +tates. Intergraph Corporation 3untsville, Ala!ama 81000/

Warranties and Liabilities All warranties given !y Intergraph Corporation a!out e4uipment or software are set forth in your purchase contract, and nothing stated in, or implied !y, this document or its contents shall !e considered or deemed a modification or amendment of such warranties. Intergraph Intergraph !elieves the information in this pu!lication is accurate as of its pu!lication date. date. 5he information and the software discussed in this document are su!&ect to change without notice and are su!&ect to applica!le technical product descriptions. descriptions. Intergraph Corporation is not responsi!le for any error that may appear in this document. 5he software discussed in this document is furnished under a license and may !e used or copied only in accordance with the terms of this license. 6o responsi!ility responsi!ility is assumed !y Intergraph Intergraph for the use or relia!ility of software on e4uipment e4uipment that is is not supplied !y Intergraph or its affiliated companies. 537 $+7R * 537 +*59AR7 I+ 7:;7C57) 5 7?A>$A5 7?A>$A5I6 I6 A+ 5 537 $+7*$>67++ * 537 +*59AR7 +*59AR7 I6 3I+ 96 76?IR6<765.

Trademarks Intergraph, the Intergraph logo, ;)+, +mart;lant, *rame9or@s, IConvert, I7port, I+@etch, Intelli+hip, I6tools, I+%76, %76, +upport
Contents

Introduction...... Introduction................... ........................... ........................... ........................... ............................ ........................... ........................... ............................ ........................... ........................... .............. 35 Workflow:............... Workflow:............................ ........................... ............................ ........................... ........................... ............................ ........................... ........................... ............................... ................. 35 Administration Workflow:. Workflow:............... ............................ ........................... ........................... ............................ ........................... ........................... .................................. .................... 36 User Workflow:............... Workflow:............................. ........................... ........................... ............................ ........................... ........................... ............................ ................................... ..................... 37 Total Total Workflow:............... Workflow:............................. ........................... ........................... ............................ ........................... ........................... ............................ ................................... ..................... 38 Delivered Styles:................... Styles:................................ ........................... ........................... ........................... ............................ ........................... ................................. .................... ......... 38 SmartPlant 3D User nterfa!e:...................... nterfa!e:................................... ........................... ............................ ........................... ........................... ............................ ................... ..... 3" Lab 1: Out of the Box Isometric drawings extraction........................ extraction...................................... ............................ ..................................... ....................... 41 #$tra!tin% sometri! Drawin%s &sin% Drawin%s 'y (&ery )ana%er.......................... )ana%er..................................................... ........................... *+ Lab 2: Oeriew of O!tions Browser............................... Browser............................................ ........................... ............................ ........................................... ............................. 4" So&r!e of ,-tion..................... ,-tion.................................. ........................... ............................ ........................... ........................... ...................................................... ........................................ *6 Sear! o-tions....................... o-tions.................................... ........................... ............................ ........................... ........................... ............................ ................................. ................... ........ *" Sortin%..................... Sortin%.................................. ........................... ............................ ........................... ........................... ........................... ........................... ............................ ............................. ............... 5/ nsertin% and deletin% rows....................... rows..................................... ........................... ........................... ............................ ........................... ........................... ....................... ......... 5/ Savin% o-tions...................... o-tions.................................... ............................ ........................... ........................... ............................ ........................... ........................... ............................. ............... 5+ m-ortin% o-tions...................... o-tions.................................... ........................... ........................... ............................ ........................... ........................... ............................ ......................... ........... 50 Lab3: Creating #ew $t%&e....................... $t%&e..................................... ........................... ........................... ............................ ........................... ........................... ............................. ............... 53 1o-yin% #$istin% SP3D 2order......................... 2order....................................... ............................ ........................... ........................... ............................ ............................ .............. 53 2&lkloadin% ew style..................... style................................... ........................... ........................... ........................... ........................... .............................................. ................................ 53 Lab 4: Im!orting Im!orting 'icrostation 'icrostation ()# Border fi&e........................ fi&e...................................... ........................... ........................... .................................. .................... 55 m-ortin% e$istin% D4 'orderseed file......................... file...................................... ........................... ............................ ........................... ............................ ............... 55 Lab 5: Create *ac+age and $etu! ,ierarch%................................ ,ierarch%.............................................. ........................... ........................... .............................. ................ 51reatin% a -a!ka%e.......................... -a!ka%e........................................ ........................... ........................... ........................... ........................... ............................................. ............................... 58 1reatin% Drawin% 'y (&ery )ana%er....................... )ana%er..................................... ........................... ........................... ............................ .................................. .................... 6/ Lab": 'anaging ,ierarchies.................. ,ierarchies................................ ........................... ........................... ........................... ........................... ........................................... ............................. "1 Selfmaintainin% ierar!ies.................... ierar!ies.................................. ........................... ........................... ............................ ........................... ..................................... ........................ 6+ Lab : (efining Border $i/e 0 'argins and nits...................... nits................................... ........................... ............................ ................................ .................. . "3 Lab-: (rawing rame..................... rame................................... ........................... ........................... ............................ ........................... .................................................. ..................................... "Pla!in% drawin% -ro-erty a'els......................... a'els....................................... ............................ ........................... .................................................... ....................................... 68 Settin% Do!&ment Pro-erties................... Pro-erties................................ ........................... ............................ ........................... ........................... ............................ ........................ .......... 6"

1ontents Lab : (rawing rame ttributes............................................................................................................ 2 Attri'&te )AP...................................................................................................................................... 70 Drawin%rame.Attri'&tes..................................................................................................................... 73 Add Pi-eline ist 9e-ort...................................................................................................................... 7* 9e-ort Tem-late............................................................................................................................ 7* Lab 1: (rawing Content......................................................................................................................... 1an%e )ana%ement.......................................................................................................................... 78 so 2reak 1ontrol Points...................................................................................................................... 80 Sele!tive dis-lay of S&--orts.............................................................................................................. 85 Lab 11: (rawing ormat....................................................................................................................... ... - Dotted Sym'olo%y............................................................................................................................... 8" Lab 12: (rawing (efinitions.................................................................................................................... 4 Lab 13: (rawing (imensioning and Coordinates.......................................................................... .......  1an%e Dimension Style to &ll Strin%................................................................................................ "7 Dimension to Tien Points................................................................................................................... "8 1ol&mn4rid 9eferen!e..................................................................................................................... +/+ Lab14: Labe&s......................................................................................................................................... 13 S3D.a'els.1om-onentote............................................................................................................. +/3 S3D.a'els.1om-onentote1onditional........................................................................................... +/5 S3D.a'els.#nd1onne!tion.............................................................................................................. +/5 Lab15: ttribute Brea+s......................................................................................................................... 1 Add a new 'reak for !leanin% re&irement........................................................................................ +/7 S3D.a'els.)is!S-e!................................................................................................................... .... +/7 a'els.1om-onentAtts...................................................................................................................... ++/ Addin% 1om-onent Pro-erties:.......................................................................................................... ++/ Lab 1": 'ateria& List............................................................................................................................... 113 )aterial ayo&t.................................................................................................................................. ++3 )aterialist.i$ed........................................................................................................................ ++3 )aterialist.;aria'leayo&t......................................................................................................... ++5 a'els.)aterialist...................................................................................................................... +00 )aterialist.UserDefined............................................................................................................. +0* )aterial Des!ri-tion 'y a'el............................................................................................................ +06 )aterialist.1&tist............................................................................................................................ +07 Lab1: 6e&d O!tions............................................................................................................................. 12Se&en!e welds................................................................................................................................ +08

30

1ontents T&rn on weld n&m'ers....................................................................................................................... +08 Weld ist............................................................................................................................................ +3/ Lab1-: (etai& $+etch.............................................................................................................................. 133 Lab 1: $%mbo& 'a!!ing....................................................................................................................... 13" )a--in% Sym'ol
33

Introduction A&tomated isometri! isometri! drawin% -rod&!tion -rod&!tion is nat&rally nat&rally e$-e!ted in 3D -lant -lant desi%n and S,4# S,4# is te &ndo&'ted world leader in te -rod&!tion of s&! drawin%s. SmartPlant 3D mana%es te a&tomati! drawin% !reation> &tilisin% S,4# 'y %eneratin% a P1 ?Pi-in% 1om-onent ile@ and 'y &sin% te ,-tions 2rowserB for !ontrollin% te drawin% !onfi%&ration. Te res<ant o&t-&t is stored in te SmartPlant 3D data'ase. Te drawin% styles are stored in te SmartPlant 3D !atalo%&e and are written to an C) !onfi%&ration !onfi%&ration file for -ro!essin% 'y S,4#. S,4#.

SmartPlant 3D

P1 Style Data

Personal S,4#

sometri! Drawin%s

9e-orts  o%s

6or+f&ow: Te workflow in !reatin% an isometri! drawin% !an 'e !onsidered in two -arts: Te Administration Workflow W orkflow Te User Workflow W orkflow • •

35

a'3: 1reatin% ew Style

dministration 6or+f&ow: Te SmartPlant 3D Administrator Administrator will !reate an isometri! style !ontainin% a 2order file and a set or !onfi%&ration o-tions> tis will 'e 2&lk oaded into te 1atalo%. A *i!ing Isometric (rawing b% ;uer%< !om-onent is ten !reated tis is asso!iated to te isometri! style to form a *ac+age<. *ac+age<. Te Pa!ka%e is stored in te sym'ols sareB for te -ro=e!t. Te Pi-in% sometri! Drawin% 'y (&eryB !om-onent s-e!ifies te EwatE -ortion of te &ery. &ery.

36


ser 6or+f&ow: Te SmartPlant 3D &ser !reates a Drawin%s 'y (&ery )ana%erB !om-onent to s-e!ify te E wereE -ortion of te &ery. Te (rawings b% ;uer% 'anager< !om-onent 'anager< !om-onent referen!es a *ac+age tat *ac+age tat s-e!ifies wat items will 'e e$tra!ted and wi! isometri! style will 'e &sed. Te 'asi! &ser workflow for !reatin% Pi-in% sometri! Drawin%s 'y (&ery is as follows: •

• • • •

1reate a (rawings (rawings b% ;uer% 'anager< !om-onent 'anager< !om-onent wi! s-e!ifies were to look for te data ?Pi-eline> Pi-e 9&n F.@ 9&n te filter'ased &ery 1reate te drawin%s U-date te drawin%s> if ne!essary P&'lis te drawin%s to a viewa'le %ra-i! file no -ysi!al data is -&'lised

37


9ota& 6or+f&ow:

(e&iered $t%&es: #a! Pi-in% sometri! Drawin% 'y (&ery !om-onent as an asso!iated isometri! style. Te delivered styles are Iso=*i!e&ine> Iso=*i!erun> Iso=*en$!oo&> Iso=$!oo&> Iso=6B$> and Iso=$tress. Go& !an o-en te Isometric $t%&e O!tions Browser from any of te isometri! drawin% styles 'y ri%t !li!kin% te drawin% style in te Conso&e or in te (rawings and 8e!orts task and sele!tin% >dit O!tions on te sort!&t men&. Te 'rowser allows yo& to set o-tions for isometri! drawin% format and !ontent> tese !an%es !an 'e saved to te 1atalo% or e$-orted to an C) file for &se on oter -ro=e!ts et!. After !reatin% te Pi-in% sometri! Drawin%s> yo& !an o-en tem for viewin%> editin%> -rintin%> and -&'lisin% ?if yo&r model as 'een re%istered &sin% te SmartPlant 9e%istration WiHard@. To tro&'lesoot te drawin%s> yo& !an &se te ?iew >xtraction (ata !ommand to a!!ess -art and re-orts information and lo% files.

38


$mart*&ant 3( ser Interface: Te main &ser interfa!e wen in te SmartPlant 3D is sown 'elow> &se tese dia%rams to lo!ated '&ttons and feat&res mentioned in te la's.

n addition> wen in te Drawin%s and 9e-orts task> te interfa!e is as sown 'elow:

3"


n SmartPlant 3D version 0//7> Servi!e Pa!k * and a'ove> te drawin% !onsole is availa'le from witin all tasks. t is dis-layed from te Tools I Drawin% 1onsole men& item:

Tese la's %ive instr&!tions from te Drawin%s and 9e-ortsB task> owever> &sin% ;0//7 Servi!e Pa!k * and a'ove> tey !an =&st as easily 'e -erformed &sin% te Drawin% 1onsoleB. Do!&ment !ons:

Pi-in% sometri! Drawin%s 'y (&ery )ana%er Drawin%s 'y (&ery )ana%er ,&t of Date Do!&ment U- to Date Do!&ment Do!&ment wit Warnin% o Part fo&nd in Pi-eline

*/


Lab 1: Out of the Box Isometric drawings extraction >xtracting Isometric (rawings using (rawings b% ;uer% 'anager 1. n a' +> yo& are %oin% to %enerate an isometri! &sin% te o&t of te 'o$B soJPi-eline style: 2. #nter SmartPlant 3D 'y do&'le !li!kin% te sometri!JWorkso-.ses sort!&t on te Deskto-:

3. Swit! to te (rawings and 8e!orts task 'y sele!tin% te Task I Drawin% and 9e-orts men& item:

4. 9i%t !li!k on -lant $*3(9rain> sele!t #ew.. to !reate a older> te folder is fo&nd on te 4eneral Ta':

5. 9ename te new folder to: I$O$

*+


". 9i%t !li!k on S,S> sele!t ew.. to !reate a Drawin% 2y (&ery )ana%er from te 4eneral ta'

. 9ename te res<in% Drawin%s 2y (&ery )ana%er folder to nit1:

*0

a'3: 1reatin% ew Style -. 9i%t !li!k Unit/+ and sele!t Set&-..

. Under ilter sele!t )ore.. and -i!k Trainin% iltersIU/+ Under Pa!ka%es Sele!t )ore.. and -i!k Iso *i!e&ine

1. 1li!k ,< 11. 9i%t !li!k Unit/+ and sele!t 9&n (&ery

*3

a'3: 1reatin% ew Style 12. #$-and te tree str&!t&re !reated and ri%t !li!k so Pi-eline to la&n! 1reate Drawin%s:

13. 9i%t !li!k iso 117* and sele!t !date #ow

14. ,n!e te %reen ti!k a--ears> do&'le !li!k drawin% +//+P to review te !ontent

15. 1li!k on te so Pi-eline !om-onent in te Drawin%s !onsole K Te view of te isometri! will !lose.

**

a'3: 1reatin% ew Style 1". 9i%t !li!k drawin% +//+P and sele!t ;iew #$tra!tion Data.. To review lo%> -!f and drawin% files

Tis !om-letes a' +.

*5


Lab 2: Oeriew of O!tions Browser All o-tions to modify te look and feel of isometri! are a!!essed via te sometri! Style ,-tions 2rowser. #$-and te so Pi-eline sometri! 'ran!> sele!t so Pi-eline and #dit ,-tions.

$ource of O!tion ;ersion SP3D;0/++SP+ and a'ove> sometri! ,-tion 2rowser &ser interfa!e as 'een !an%ed. All S3D ,-tions are listed o&t se-arately &nder S3D ode in te ,-tion 2rowser and all oter o-tions a'ove S3D node are te onS3D ,-tions ?so%en@ o-tions:

*6


+. #$-and and sele!t S3D.Drawin%.Dimensions Sele!t 1oord,&t-&t2,P in te ri%t -ane.

*7


oti!e te 'ottom ri%t !orner says S3D> indi!atin% tat tis is a S3D o-tion and not te so%en o-tion. 2&iltin el- e$-lains te -ossi'le val&es of te swit!es and teir effe!t. 0.

Sele!t Drawin%.Dimensions.1oordS&--orts in te ri%t -ane.

oti!e te 'ottom row now tells &s an o-tion ?,P@ n&m'er and a swit! ?SW@ n&m'er. Tis indi!ates tat tis is so%en o-tion wit referen!es to Alias so%en o-tion and swit! n&m'er. Tis information is -rovided to el- look&- in te so%en ,-tion Swit!es el- %&ide.

*8


$earch o!tions Te sear! 'o$ at te to- of te 'rowser a!ts as a s&'strin% sear! for all o-tion names. +.

Ty-e WeldB in te sear! 'o$ and -ress enter. All o-tions wit name !ontainin% te te$t WeldB are dis-layed.

*"

a'3: 1reatin% ew Style Te sear! 'o$ also el-s sear! for Alias o-tions 'y n&m'er &sin% te sear! synta$ L,PT:$$ were $$ is te o-tion n&m'er. 0.

#nter L,PT:" in te sear! 'o$ and -ress enter. Tis dis-lays all SP3D o-tions tat &sed to 'e vario&s swit!es on Alias o-tion ".

$orting +. 1li!kin% on any !ol&mn eadin% sorts a !ol&mn

Inserting and de&eting rows +.

Tere wo&ld 'e a 'lank row at almost every %rid view were &ser as to add rows. To insert a row =&st kee- on ty-in% in te 'lank row and new rows wo&ld 'e added a&tomati!ally if te last one is !ons&med. #.%. #$-and Drawin%.ayers.ayers?+/@ in tree view and start ty-in% at very last row> o'serve tat new 'lank row wo&ld !reate a s soon as yo& start ty-in% in te last row.

5/


0.

To delete a row> yo& !an &se te delete row '&tton or delete key on key'oard> if fo!&s is on %rid view.

$aing o!tions +.

To save o-tions to !atalo%> &se Save to 1atalo% '&tton from te tool'ar.

0.

To save o-tions to C) file> sele!t te to- node of te style and sele!t Save Style C) ileB '&tton from te tool'ar.

5+


Im!orting o!tions 3.

To im-ort o-tions from a -revio&sly saved file> sele!t any node and sele!t te im-ort '&tton> ten 'rowse to te saved file. Tis f&n!tionality !an 'e &sed to &-date an entire style or -ortion of style to new o-tions introd&!ed 'y nter%ra-. e.%. Sele!t Attri'&te)AP node in te tree and sele!t m-ort Data from ile. Ten 'rowse to a C) file and !li!k ,<.

*. A messa%e is sown askin% for !onfirmation.

5. #nterin% 1omments Users !an enter !omments in te o-tions 'rowser in te 1omments se!tion of te style.

Te ori%in !ol&mn is a -i!k list for te &sers to distin%&is teir !omments from nter%ra- !omments. f a date is entered in ))DDGGGG format in te date field> te software a&tomati!ally fills in te time. Te intials and !omments fields are standard te$t fields for &sers to enter watever te$t tey wis.

50


Lab3: Creating #ew $t%&e 1reatin% a new style involves editin%im-ortin% a 'ordertem-late file> !o-yin% te C) file wit o-tions and '&lkloadin% te new style into te !atalo%.

Co!%ing >xisting $*3( Border +. 0. 3. *. 5. 6.

1o-y and -aste soJPi-eline.i%r file from te sym'ol sare MMNServerOMSym'olsMPmf%soStyleData . 1o-y and -aste soJPi-eline.$ml file from te sym'ol sare MMNServerOMSym'olsMPmf%soStyleData 9ename 1o-y of soJPi-eline.i%r to UsersoJPi-eline.sa ,-en te UsersoJPi-eline.sa file &sin% Drawin% #ditor. Save te file and e$it Drawin%s #ditor 9ename UsersoJPi-eline.sa to UsersoJPi-eline.i%r

Bu&+&oading #ew st%&e +. 0. 3. *. 5. 6. 7. 8. ". +/.

++. +0. +3. +*. +5. +6. +7.

,-en te file 2&lkloadisokeys.$ls from Nnstall Dire!toryOM1atalo%DataM2&lkloadMDatailes. Sele!t row 6 ?soJPi-eline@ and ri%tmo&se 1o-y. Sele!t row ++ ?#nd@ and ri%tmo&se nsert 1o-ied 1ells. Add letter A in !ol&mn A of row ++ 1an%e soJPi-eline to UsersoJPi-eline in te soames !ol&mn 1an%e ,&tP&tsoDrawin%so!ation to soDrawin%sMUsersoJPi-eline 1an%e so2a!kin%Seet to Pmf%soStyleDataMUsersoJPi-eline.i%r 1an%e n%r,-tion to Pmf%soStyleDataMUsersoJPi-eline.$ml Save te e$!el s-readseet and !lose #$!el. 2rowse to te folder Pmf%soStyleData in te Sym'ols sare on te server and !o-y te file> soJPi-eline.$ml> rename it to 'e UsersoJPi-eline.$ml and &n!e!k te read only -ro-erty for te files. ,-en te UsersoJPi-eline.$ml file &sin% a te$t editor and &se te sear! tool for te word soJPi-eline. 1an%e all o!!&rren!es of soJPi-eline to UsersoJPi-eline Save te file. Start te 2&lkload &tility &sin% Start  Pro%rams  nter%ra- SmartPlant 3D  Data'ase Tools  2&lkload 9eferen!e Data 1li!k te Add '&tton and add te 2&lkloadso !atalo% and !atalo% s!ema name n te lo% file field> sele!t te elli-sis ?F@ '&tton and !li!k ,<.

53

a'3: 1reatin% ew Style +8. 1li!k oad to load te new style into te !atalo%.

+". 9eview te lo% file > it so&ld say S&!!essf&lly !reated te o'=e!t in row N++O

5*


Lab 4: Im!orting 'icrostation ()# Border fi&e Im!orting existing ()# border0seed fi&e +.

f yo& ave an e$istin% D4 or DW4 file wi! is 'ein% &sed as seed'order> it !an 'e re&sed for SP3D isometri!s.

0.

An e$istin% D4 file ?UsersoJPi-elineD4.d%n@ is availa'le at MM NServerOMSym'olsMPmf%soStyleData. f &sin% D4 file> first> &sin% )i!roStation tools> mer%e te seed and 'order file into a sin%le D4 file. owever> for tis la' we ave a ready made D4 file to im-ort in Sa-e0D.

3.

Start Drawin% #ditor. ?sa-e0dserver.e$e !an 'e lo!ated at 1:MPro%ram ilesMSmartPlantM3DM1ommon0DMSa-e0DM2in@

*.

n te Tools K ,-tions K orei%n Data ta'> !li!k ,-tionsF for te )i!roStation format> ten> &n!e!k te it im-orted data to a!tive seetB o-tion.

5.

ile K ,-en and navi%ate to te D4 ?UsersoJPi-elineD4.d%n@ file.

6.

4o to ile K Seet Set&- and ad=&st te widt and ei%t of seet wit $tandard or Custom siHe. )ake s&re tat te 2order %ra-i!s are in Bac+ground seet and not in 6or+ing seets. Seet set&- needs to 'e -erformed for 'ot workin% as well 2a!k%ro&nd seet.

55


7. Set 1&stom Widt as 24 in and ei%t as 1- in so as to mat! te siHe of im-orted D4 file.

8.

ile K )ove seet 2order. S-e!ify te C and G ori%in val&es as / ?Qero@. Te Pin -oint wo&ld refer te settin% s-e!ified over ere. Te Drawin% rame la'els wo&ld 'e -la!ed referrin% to ,ri%in settin%s -rovided ere.

56


".

1an%e 'a!k%ro&nd !olor ?if ne!essary@ &sin% Tools K ,-tions and make oter !an%es as re&ired.

+/. Save te file as a UsersoJPi-elineD4.sa ++. 9ename te file as UsersoJPi-elineD4.i%r +0. Tis im-orted D4 file !an now 'e &sed as a normal 'order file wi! !an 'e &tiliHed for !reation of a new style.

57


Lab 5: Create *ac+age and $etu! ,ierarch% Creating a !ac+age +. Swit! to Drawin%s and 9e-orts task. 0. Add a new folder &nder te root of te -lant !alled *ac+agesB 3. 9i%t!li!k on Pa!ka%es folder and add a new *i!ing Isometric (rawings b% ;uer%< !om-onent. 9ename te !om-onent ser B *. Set&-F User and in te filter field sele!t )oreF 5. #$-and te tree till te *i!ingB folder as sown in te -i!t&re and -i!k te *i!e&ines filter &nder 1atalo% iltersIDefa< iltersISP3D ,'=e!t iltersI,'=e!t Ty-esI Pi-in%

6. n te style field> sele!t te style serIso=*i!e&ine< ?Tis style was '&lkloaded in earlier la'@

58


7. 9i%tmo&se User and Save Pa!ka%eF

8.

ame te Pa!ka%e UserB and save it in te sometri!s ?2y (&ery@ folder

5"


Creating (rawing b% ;uer% 'anager 1. 2. 3. 4.

9i%t!li!k I$O$B> sele!t ewF and add a new (rawing b% ;uer% 'anager< 9ename it to 'e ser (rawings< Sele!t )oreF in te filter field on te Set&- dialo% and sele!t te Plant iltersMAllB filter Sele!t )oreF in Pa!ka%es field and sele!t te UserB -a!ka%e

5. ".

9i%tmo&se User Drawin%sB and -i!k 9&n &ery #$-and ierar!y and !reate drawin%s for A0 K U/+  Pro!ess.

.

U-date +//+P

6/


Lab": 'anaging ,ierarchies $e&f7maintaining hierarchies 1. 2.

Swit! to -i-in% task. Set lo!ate filter to -i-elines.

3.

#$-and works-a!e e$-orer till -i-eline +//+P is e$-osed. Sele!t -i-eline +//+P.

4.

n te ri''on 'ar> !an%e te name of te -i-eline from +//+P to +//+P0// and -ress enter.

5.

Swit! to Drawin%s and 9e-ort task. #$-and te tree> noti!e tat te name of te -i-eline is a&tomati!ally !an%ed in te detail view.

6+


".

Swit! 'a!k to -i-in% task.

.

1an%e lo!ate filter to All and in te works-a!e e$-lorer> sele!t te -i-in% system *rocess< &nder A0 K U/+.

-.

1an%e its name to *rocess 271<

.

Swit! to Drawin%s and 9e-orts task> sele!t User Drawin%sB and 9&n (&ery.

1. A warnin% is sown> ,< te warnin%.

11. After a 'rief wait> te !onsole ierar!y is &-dated to mat! system ierar!y.

12. 9evert !an%es made to Pi-eline and Pi-in% System ?+//+P and Pro!ess@

60


Lab : (efining Border $i/e 0 'argins and nits n a' 7> yo& are %oin% to set te drawin% siHe> &nits and mar%ins. ormally> te Drawin%.1ontrols.Drawin%SiHe o-tion is &sed to s-e!ify te siHe of yo&r isometri!.

f yo& ave a nonstandard drawin% siHe> yo& will need to set it e$-li!itly in te o-tions. Use te Drawin%rame.1&stomWidt and 1&stomei%t o-tions for tis -&r-ose.

Additional o-tions ere allow yo& to reserve s-a!e for )ar%ins and reserved areas in te isometri!. 1. 2. 3.

9i%t!li!k I$O$B> sele!t ewF and add a new (rawing b% ;uer% 'anager< 9ename it to 'e serIso2< Sele!t )oreF in te filter field on te Set&- dialo% and sele!t te *&ant i&ters@&&B filter

63

a'3: 1reatin% ew Style 4.

Sele!t )oreF in Pa!ka%es field and sele!t te serIso2B -a!ka%e

5.

9i%tmo&se ser Iso2< and -i!k 9&n &ery

".

#$-and ierar!y and !reate drawin%s for A0  U/+  Pro!ess.

6*


.

U-date +//+ K P Drawin%.

-.

We wo&ld 'e !an%in% te Drawin% SiHe a!!ordin% to te siHe o f 2order file wi! is A0. Sele!t te UsersoA0

.

style and &sin% a ri%t mo&se !li!k> sele!t #dit ,-tionsB

Sele!t te Drawin%.1ontrols se!tion> and !an%e Drawin%SiHe and PostS!ri-tSiHe to RA0> !an%e Units to )etri!  n! 2oresB

65


1. Sele!t te Drawin%rame se!tion and !an%e eft )ar%in  0/3> 9i%t )ar%in  +/ To- mar%in  +/> 2ottom mar%in  50> 9eservedAreaDrawin%  /

66


11. Save te !an%es to te !atalo% 'y !li!kin% te Save to 1atalo%B i!on: 2rowser.

and !lose te ,-tions

12. U-date drawin% +//+P. An A0siHe m<iseet drawin% is !reated wit te material list in te wron% -osition:

Ti-: f yo& !lose te ,-tions 2rowser> yo& will 'e asked if yo& want to save te !an%es. n s&'se&ent la's> we wo&ld see ow to modify )aterial ists. Tis !om-letes a' 7.

67


Lab-: (rawing rame or do!&ment -ro-erties> tese will not 'e written as attri'&tes in te P1> instead> tey will 'e linked from te drawin% do!&ment to te 'order file. Do!&ment -ro-erties !an 'e set a t any level in te )ana%ement 1onsole> for instan!e> te -ro=e!t Tile !o&ld 'e set at -ro=e!t level and inerited 'y all te do!&ment> wilst te Drawn 2y> 9evision> Drawin% Title et!. will 'e set on individ&al do!&ments.

*&acing drawing !ro!ert% Labe&s n tis a'> yo& are %oin% !reate a link 'etween a do!&ment -ro-erty val&e and te 'order &sin% s-e!ial Te$t 2o$es wit C) linkin% te -ro-erty to te 'o$. +.

1o-y te file UsersoA0.sa from te MMNServerOMSym'olsMPmf%soStyleData folder to MM NServerOMSym'olsMDrawin%sM1atalo%Mtem-lates folder

0. #nter te Drawin%s and 9e-orts Task. 3. Sele!t Tools I #dit 2order Tem-late. *. Sele!t RUsersoA0.sa 5. rom te ;iew men&> sele!t 2a!k%ro&nd Seets

6.

Sele!t te Pla!e Drawin% Pro-erty a'el !ommand

7. n te a'el Set -&ll down> -i!k Title Area 8. n te ield -&ll down> -i!k Site ame

68


".

1li!k in te title area to te ri%t !orner of te seet to -la!e te la'el as sown 'elow:

+/. Similarly -i!k te Title+ and Title 0 fields from te Title la'el set and -la!e tem as well. ++. Ti-: 2y !li!kin% on te two 'o$Bs yo& are a'le to dis-lay te -la!ed la'els as well as definin% Te$t ei%t> ont> &stifi!ation et!. +0. Save te tem-late> set te view 'a!k to Workin% SeetsB and e$it Drawin%s #ditor. +3. 1o-y te file UsersoA0.sa 'a!k from te MMNServerOMSym'olsMDrawin%sM1atalo%Mtem-lates folder to te MMNServerOMSym'olsMPmf%soStyleData folder +*. Sele!t te UsersoA0


+5. Wilst te ,-tions 2rowser is o-en> 1o-y and Paste te RUsersoA0.sa from te MM NServerOMSym'olsMPmf%soStyleData folder to re-la!e te one e$istin% in te windows T#)P folder. +6. Save and e$it from te o-tions 'rowser.

$etting (ocument *ro!erties +.

n tis a'> yo& are %oin% to set a do!&ment -ro-erty and see ow it a--ears on te 'order.

0.

Sele!t te UsersoA0

3.

Sele!t Te Title Area ta' and set te site name to )G ST#B:

style and &sin% a ri%t mo&se !li!k> sele!t Pro-ertiesB

6"


*. 1li!k ,< 5.

Sele!t te +//+P do!&ment and &sin% a ri%t mo&se !li!k> sele!t Pro-ertiesB

6.

Sele!t te Title Area ta' and set Title+ S,)#T91 D9AW4 and Title 0  ,9 PP## +//+P as sown:

7/

a'3: 1reatin% ew Style 7. 1li!k ,< 8.

oti!e tat te Drawin% stat&s !an%es to ,&t Kofdate !an%ed -ro-erties of te d rawin%.

sin!e we

".

U-date te drawin% +//+P and o'serve te o&t-&t for te -ro-erty la'el on te drawin%.

+/. Tis !om-letes a' 8

7+


Lab : (rawing rame ttributes so%en as "" &ser defina'le attri'&tes availa'le for te &ser to set. Tese attri'&tes !an ten 'e -ositioned on te seet ?in te area o&tside te drawin%s area@ 'y !oordinate. )a--in% te attri'&te is a 3 ste- -ro!ess. Ste- +: Use te Attri'&te)AP se!tion of te style to ma- #$ternal ame ?&ser entered name@ to an S,4# attri'&te ?!oose from ATT92UT#++ to ATT92UT#""@ Ste- 0: Use a la'el to de!ide wat data te !osen so%en ATT92UT# will old. t is -ossi'le to de!ide at tis -oint te oidty-e of te item tat te la'el is eval&ated for. Te !oi!es are Defa<B wi! eval&ates te la'el for te o'=e!t tat te iso is 'ein% !reated for ?i.e. -i-eline for -i-eline isos> s-ool for s-ool isos et!@> or e$-li!it !oi!e of Pi-e9&nB> wi! eval&ates te la'el for te -rime r&nB ?lar%est PD r&n on te -i-eline> if tere are more tan one wit te lar%est PD> ten one of tem@. Ste- 3: Usin% Drawin%rame.Attri'&tes se!tion of te style> -osition te la'el on te seet at known !oordinates> and set te te$t -ro-erties ?ei%t> widt and font@.

ttribute '* +. 0. 3. *.

5. 6. 7.

n Drawin%s V 9e-orts Task e$-and S,SIUserDrawin%sIA0IU/+IPro!ess Sele!t and #dit ,-tions for te ser< style. 4o to S3D.Attri'&te)AP.Attri'&te)a-?+07@B se!tion ,n te last 'lank row> enter #$ternal ame as User+B V -i!k ATT92UT#0+ for te so%en Attri'&te

#$-and S3D.a'els.Drawin%rame.Drawin%rame?3@ ,n te last 'lank row> Pi!k User+B for a'elAttri'&te Pi!k te !atalo% la'el Pi-in% Toolti- -i-e r&nB as te a'elame

70


8. Pi!k Pi-e9&n as te ,idTy-e

(rawingrame.ttributes +. 0.

#$-and Drawin%rame.Attri'&tes and add a new row Pi!k User+ for ostAttri'&te and s-e!ify val&es as 'elow

3. Save to !atalo% *. 1reate an isometri! for te -i-eline +//0P. a'el ret&rned val&e wo&ld 'e seen at te !oordinates s-e!ified ?9efer followin% -i!t&re@.

73


dd *i!e&ine List 8e!ort An e$!el ta'le !ontainin% te -ro-erties of te r&ns in te -i-eline may 'e -la!ed on te seet at te desired !oordinates. t is -ossi'le to &se la'els to s-e!ify wi! attri'&tes so&ld 'e dis-layed in te e$!el seet. Te e$!el -osition on te drawin% seet !an 'e determined 'y !oordinates.

Drawin%rame.Pi-elineist $how*i!e&ineListBox< !ontrols weter te re-ort is o&t-&t or not. Te Use9e-ortTem-late o-tion !ontrols weter te new style ?re-ort@ is &sed or old style ?la'el driven list@ is &sed. Te 2o$,ri%inC> 2o$,ri%inG and 2o$,ri%in -i!k lists !an 'e &sed to -osition te 9e-ort on te drawin% seet.

7*

a'3: 1reatin% ew Style 9e-ort Tem-late +. Sele!t and #dit Style ,-tions ser B

0.

Set S3D.Drawin%rame.Pi-eineist.Use9e-ortTem-late  Tr&e

3.

or te o-tion S3D.Drawin%rame.Pi-eineist.9e-ortTem-late.Tem-lateame> -i!k te elli-sis ?F@ and sele!t te 9e-ort tem-late from 9e-orts K Ty-es of 9e-orts K Pi-in% K Pi-in% Pi-e ine ist

*. Save to !atalo%. 5.

)ake s&re tat Tr&st a!!ess to ;is&al 2asi! Pro=e!ts is !e!ked in #$!el )a!ros

75


76


Save to !atalo% and &-date +//0P isometri!. Pi-eline list 9e-ort wo&ld 'e -la!ed at sown 'elow:

Tip: ,nly +// visi'le !ol&mns in #$!el 9e-ort Tem-late will 'e dis-layed inside sometri! Drawin%

77


Lab 1: (rawing Content Change 'anagement Change Management on a -i-in% isometri! drawin% refers to te fa!t tat te same information needs to a--ear on te same seet of an isometri! drawin% ea! time yo& e$tra!t te drawin% ?re-eata'ility@.

+. #dit ,-tions for ser B style in U/+ to o&t-&t AS R1 siHe Drawin% ?(rawing.Contro&s.(rawing$i/e @

78


Set S3D.Drawin%.1ontent.1an%e)ana%ement#na'led o-tion to Tr&e

3.

Set te Drawin%.1ontrols.Pi-eineS-littin% o-tion to  ?@ to leave room for %rowt in te drawin% !ontent area

7"

a'3: 1reatin% ew Style *.

To andle material list overflows from seet to seet wito&t 'reakin% !an%e mana%ement> &se isometri! o-tion settin%s ?tese are already set@

5.

)aterialist.)aterialist,verflow to 1ontin&ation Seet

6.

)aterialist.,verflowDrawin%D to Al-a s&ffi$ ?e.%: 0A> 3A> et!@.

7.

Set )aterialist.Drw+of+,nSin%lesos to Tr&e

8.

Wit tis done> -art items will remain on te same seet

".

#$tra!t line +//0P &nder U/+ and review seets !ontent. )ake s!reensots or Saveas to -reserve a !o-y of tis rev/ ?i%nore 'order siHe mismat!..@

+/. Swit! to Pi-in% task and model additional -i-in% on line +//0P. Under normal !onditions tis mi%t -&s old !om-onents to different iso seets

8/


++. #$tra!t line +//0P &nder U/+ a%ain and !om-are seets !ontent wit tat of rev/ +0. All items tat were e$tra!ted te first time so&ld a--ear on te same seet n&m'ers as 'efore +3. ew -i-in% items modeled so&ld a--ear added on e$istin% seets in -revio&sly !lear s-a!es> or in newly !reated seets +*. ,'serve tat newly added !om-onent re!eive new -art n&m'ers and te ones for e$istin% !om-onents are -reserved.

8+


Iso Brea+ Contro& *oints +.

Te &ser !an for!e a new drawin% seet for a %iven -i-eline or -i-er&n e$tra!tion 'y insertin% a *i!ing') Limit *oint in te model.

0.

4o to te Drawin%s and 9e-orts task and #dit ,-tions in te ser B style in U/+ to o&t-&t on D siHe ?Drawin%.1ontrols@ AD t&rn off 1an%e )ana%ement

80


3.

#$tra!t iso of +//+P> it so&ld 'e one sin%le seet

*. Swit! to Pi-in% task

83


1oose R1onne!tions from o!ate filter and sele!t a 1onne!tion o'=e!t on te Pi-eline +//+P as sown in te -i!t&re 'elow:

6. Sele!t Insert A Contro& *oint 7.

Position 1ontrol Point at te sele!ted 1onne!tion ,'=e!t

8. Set te Subt%!e for te !ontrol -oint to *i!ing'fg Limit *oint

8*


".

#$tra!t iso of +//+P> te &-dated drawin% so&ld ave two seets

+/. Te Pi-in% 1om-onent ile ?P1@ so&ld ave te line S,SPTP,T followed 'y te C> G> and Q !oordinates of te isometri! 'reak !ontrol -oint

85


$e&ectie dis!&a% of $u!!orts Te $3(.(rawing.Content.$u!!orti&ter isometri! o-tion allows yo& to s-e!ify a filter tat determines wi! s&--orts are in!l&ded on an isometri! drawin%. f no filter is s-e!ified> all asso!iated s&--orts a--ear on te iso. 1.

n te Pi-in% task> add 0 new an%ers 'y r&le on +//0P

2.

Set stat&s to A--roved for one of te an%ers assem'ly

3.

Use ToolsISele!t 'y ilter to !reate a Plant filter named !d=$!t tat lo!ates a--roved -i-in% s&--orts assem'lies only

86


87


Swit! to Drawin% task and #dit ,-tions for te style in ser<

5.

#$-and te tree to Drawin%.1ontent.S&--ortilter. 1li!k te elli-sis '&tton in te ;al&e field to dis-lay te $e&ect i&ter dialo% 'o$

".

Sele!t Plant filter !d=$!t and save o-tions

.

U-date so +//0P and review te s&--orts.

88


Lab 11: (rawing ormat (otted $%mbo&og% DottedSym'olo%y !an 'e set&- eiter &sin% ilters or a'els. DottedDimensionedilterDottedUnDimensionedilter.ena'les dotted dimensioned and &n dimensioned sym'olo%y for -arts in!l&ded in te filter. f 'ot -arts !onne!ted at a weld are dotted> te weld will 'e dotted as well. f a -art is ret&rned 'y 'ot te filters> te -art will 'e dimensioned. Go& !an &se DottedDimensioneda'el or DottedUnDimensioneda'el instead of DottedDimensionedilter or DottedUnDimensionedilter. f yo& are &sin% te ilter versions of te o-tions ens&re tat te a'el versions are not set. ote: n many !ases &sin% a a'el will 'e faster tan &sin% a ilter. To s-eed &- %eneration of isometri! drawin%s try &sin% DottedDimensioneda'el and DottedUnDimensioneda'el instead. Tis a' Demonstrates &sa%e of DottedDimensionedilter. +. Swit! to Drawin%s and 9e-orts Task 0. Sele!t and #dit ,-tions for Style UserB

3.

Sele!t S3D.Drawin%.ormat.DottedSym'olo%y#na'le  Tr&e

8"


*.

Sele!t te elli-sis ?F@ in te S3D.Drawin%.ormat.DottedSym'olo%y.DottedDimensionedilter field to invoke te Sele!t ilter dialo%

5.

#$-and 1atalo% iltersMDefa< ilters and !reate a new folder &nder SP3D Drawin% ilters named sometri! Drawin% ormattin%B

6. 7.

n te new folder> !reate a new filter and name te filter Dotted Dimensioned PartsB ,n te o'=e!t ty-e ta'> sele!t Pi-in%MPi-in% Parts

"/


8.

,n te -ro-erty ta'> sele!t )ore.. to add a new -ro-erty.

".

n te Sele!t Pro-erties dialo%> sele!t te 1onstr&!tion 9e&irement -ro-erty as sown

"+


+/. 2a!k on te -ro-erties ta'> sele!t te val&e #$istin%B from te !odelist

++. 1li!k ,< to define te new filter and ten sele!t it for te style. +0. A -redefined filter *i!ing Isometric (otted $%mbo&og%< !an also 'e &sed instead wi! as identi!al filter definitions des!ri'ed a'ove.

"0


+3. Save ,-tions to !atalo%. +*. Swit! to -i-in% task> sele!t a few -arts from te line +//0P and !an%e teir !onstr&!tion re&irement to >xisting<.

+5. U-date drawin% for +//0P> yo& so&ld see tat te -arts and te welds as dotted.

"3


Tis !om-letes a' ++

"*


Lab 12: (rawing (efinitions n a'+0> yo& are %oin% to !an%e te look of te drawin% 'y &sin% drawin% definitions. +.

Sele!t te UserB Style and &sin% a ri%t mo&se !li!k> sele!t #dit ,-tionsB

0.

Sele!t Drawin%.Definitions.Definitions and yo& will see te !&rrent definitions:

3.

Ti-: Te ,-tions 'rowser !an 'e resiHed to sow more !ol&mns.

"5

a'3: 1reatin% ew Style *. 5.

1li!k in a !ol&mn of te last row for insertin% new data. A--lies to  lan%es> U--er2ore  +> ower2ore  +> 1ate%ory  A> 1olo&r  5> ayer  +/> DS!ale  +//> > Ti!knessA!t&al  /.35> Ti!knesso%i!al  0.//> ine Style  / as sown:

6.

n te !&rrent drawin%> te flan%es are 'ein% sown in 'l&e> tis will !an%e tem to 'e drawn red ?te same as te -i-e@. Ti-: f yo& !an%e te Drawin% &nits to 'e )etri! 2ores ten all te 'ore val&es in tis ta'le will need to 'e !an%ed to teir metri! e&ivalents.

7.

Save te !an%es to te !atalo% 'y !li!kin% te Save to 1atalo%B i!on: 2rowser.


8. U-date te drawin% +//+P &nder U/+.

".

Wile we are !on!entratin% on te drawin%> a%ain o-en te o-tions 'rowser and Sele!t Drawin%.ormat. Set te val&e of S-oolDTy-e to one

"6


+/. Save te !an%es> !lose te ,-tions 2rowser and U-date te U/+ drawin% +//+P.

++. Go& will noti!e te , SP,, ,UDB messa%e is no lon%er sown. Tis !om-letes a'+0

"7


Lab 13: (rawing (imensioning and Coordinates Change (imension $t%&e to u&& $tring +.

,-en te isometri! +//+P and noti!e tat te dimensions down te verti!al line are !enter to !enter

0.

#dit o-tions on te UserB style and %o to Drawin%.Dimensions.ormat

3. 1an%e te ty-e to &ll Strin%B

"8


*. Save to !atalo% and e$it o-tion 'rowser. 5. U-date te isometri! +//+P> noti!e dimensions

6. Swit! format 'a!k to 2asi! for ne$t la's.

""


(imension to 9ie7In *oints Dimensionin% to tiein -oints is a!ieved 'y -la!in% a !ontrol -oint as a !ild of a -i-e -art> ten -la!in% a note on te !ontrol -oint of te ty-e a'ri!ationB and t&rnin% te Sow DimensionB !e!k 'o$ of te note on. +. Swit! to -i-in% task and Hoom in on +//+P 0. nsert 1ontrol Point and -i!k te strai%t -i-e 'etween te el'ow and te tee in te -i-eline +//+P. )ake s&re to -i!k Pi-e Part from te (&i!k Pi!k and not Pi-e eat&re.

3.

o!ate te mid -oint of te -i-e and !li!k to -la!e te !ontrol -oint.

*. Wit te !ontrol -oint sele!ted> invoke te -ro-erty -a%e 5. 1li!k te notes ta' and !li!k ew oteB

+//


#nter a'ri!ation as ote ty-e> enter TienB as te$t of te note and !e!k te Sow Dimension 'o$.

7.

1li!k ,< to finis and swit! to drawin%s and &-date +//+P. oti!e tat te tiein lo!ation is dimensioned.

+/+


Co&umn0)rid 8eference +. #dit ,-tions for te UserB Style. 0.

Sele!t S3D.Drawin%.Dimensions.1ol&mn9eferen!e. Set #na'le to Tr&e

3.

n te Str&!t&ral9eferen!eilter field> sele!t te elli-sis ?F@ > tis o-ens te Sele!t ilter dialo% and sele!t filer named *i!ing Isometric $tructura& Co&umn 8eference B from 1atalo% iltersIDefa< iltersISP3D Drawin% iltersITy-es of Drawin%sIsometri! Pi-in%.

*. 5. 6. 7.

Sele!t te filter a'ove and !li!k ,<. Set S3D.Drawin%.Dimensions.1ol&mn9eferen!e.9eferen!eo!ation  1ol&mn Save to 1atalo%. #$tra!t line +//0P. Go& so&ld see str&!t&ral !ol&mns referen!ed on te iso.

+/0


8.

Similary> for dis-layin% 4rid 9eferen!es> a filter !an 'e defined for 4rid Systems and o-tion 8eferenceLocationB so&ld 'e modified to )rid Lines instead of Co&umn.

+/3


Lab14: Labe&s $3(.Labe&s.Com!onent#ote Tis node in te style is &sed to o&t-&t notes on te fa!e of te iso. otes !an 'e o&t-&t for seven kinds of o'=e!ts ,'=e!t ,'=e!t -assed to la'el Pi-e

Pi-e -art o!!&rren!e

1om-onent

Pi-e !om-onent o!!&rren!e

nstr&ment

Pi-e instr&ment o!!&rren!e

S-e!ialty

Pi-e s-e!ialty o!!&rren!e

;alve

Pi-e !om-onent o!!&rren!e

Pi-e S&--ort

an%er assem'ly

9W#D

Weld

An en!los&re style !an 'e s-e!ified for te val&e ret&rned 'y te la'el. ;alid val&es are • • • •

)#SSA4# )#SSA4#S(UA9# )#SSA4#P,T#D )#SSA4#9,UD

Additionally te val&es may 'e &sed wen te la'el o&t-&t is limited to 3 !ara!ters • • •

)#SSA4#T9A4# )#SSA4#DA),D )#SSA4#191#

et &s add a !om-onent note la'el to o&t-&t te valve ta% +.

#dit ,-tions for te UserB style> e$-and te tree to find S3D.a'els.1om-onentote.1om-onentote and ten !li!k in te last 'lank row.

+/*


0.

n te a'elAttri'&te0 !ol&mn> sele!t ;A;#> ten in te la'el !ol&mn> 'rowse to te !atalo% for te 1atalo% a'els and -i!k te Pi-in%I Pi-in% sometri! ;alve Ta% la'el

3.

n te messa%e en!los&re !ol&mn> -i!k )#SSA4#S(UA9#

+/5


Save to !atalo% !atalo% and &-date line +//+P. +//+P. Go& so&ld so&ld see te valve valve ta%s sown sown on te iso iso ne$t to to te valves.

$3(.Labe&s.Com!onent#oteConditiona& a'els.1om-onentote a'els.1om-onentote o&t-&ts te val&e ret&rned 'y te la'el dire!tly onto te isometri!. owever sometimes it is desired to o&t-&t a note on te isometri! 'ased on !ertain !riteria. #.%. ta% for valves wit !ertain ta%s are to 'e o&t-&t on te iso '&t for oter ta%s notin% is to 'e o&-&t. Software eval&ates te la'el s-e!ifed in Testa'elame Testa'elame and !om-ares te o&t-&t of te la'el to ea! of te X ?-i-e@ se-arated val&es in te Test;a Test;al&es l&es !ol&mn. Tere is no limit to te n&m'er of val&es '&t te total len%t of te Test;a Test;al&es l&es field m&st not e$!eed 056 !ara!ters. f a mat! is fo&nd> te la'el s-e!ified in te ,&t-&ta'elame is eval&ated for te o'=e!t and te res< of te o&t-&t la'el is written to te P1 file and terefore to te isometri!. +. #dit ,-tions ,-tions for UserB UserB style> style> e$-and te tree to S3D.a'els. S3D.a'els.1om-o 1om-onent nentote1 ote1ondit onditional ional and insert Xa row. 0. Set te val&es val&es for te row as sow sown n

3.

Save to !atalo% !atalo% and &-date drawin% +//+P. +//+P. Go& will will see tat a ta% is o&t-&t for te %ate valves valves '&t not for te !e!k valves.

$3(.Labe&s.>ndConnection Tese are s-e!ial la'els tat are eval&ated for end !onne!tions of an isometri!. Tere are only two valid val&es for a'elAttri'&te3 !ol&mn>

+/6 +/ 6

a'3: 1reatin% ew Style or eval&atin% te #D1,#1T,#(UP)# #D1,#1T,#(UP)#T T la'el> te noHHle is -assed to te la'el and te la'el is res-onsi'le for ret&rnin% te data of interest s&! as e&i-ment name> noHHle name> and noHHle attri'&tes s&! as siHe> end -re-aration> -ress&re ratin% et!. or te #D1,#1T,PP# #D1,#1T,PP## # la'el> te -i-in% -art !onne!ted to te last o'=e!t on te !&rrent iso line is -assed to te la'el. t is te la'el wi! ten retrieves te a--ro-riate !ontin&ation item 'ased on te kind of isometri! 'ein% r&n. Pi-e Pi-eli line ne isom isomet etri ri! ! S-oo S-ooll iso isome metr tri! i! W2S W2S isom isomet etri ri! ! Penetration s-ool isometri!

Pi-e Pi-eli line ne tat tat te te -ar -artt 'el 'elon on%s %s to S-oo S-ooll ifif -art -art 'el 'elon%s on%s to s-oo s-ool> l> or -ar -artt nam name e ifif te te !onn !onne! e!te ted d -ar -artt doe does s not 'elon% to a s-ool W2S W2S so so Dra Drawi win% n% ame ame if -ar -artt is is ass assi% i%ne ned d to to W2S W2S tem tem of ty-e ty-e so so Drawin%> -i-eline name if it is not assi%ned to a W 2S tem Pi-eline tat te -art 'elon%s to

+/7 +/ 7


Lab15: ttribute Brea+s dd a new brea+ for c&eaning reuirement &n!tionality is availa'le to o&t-&t attri'&tes-e!ifi!ation attri'&tes-e!ifi!ation 'reaks on te iso. Tis f&n!tionality as two -arts> settin% an AlternativeTe$t AlternativeTe$t and s&--lyin% a la'el to %et te data for -arts. S-e!ifi!ation attri'&tes attri'&tes are divided into two !ate%ories> standard and mis!ellaneo&s. Te standard attri'&tes are -i-in% s-e!ifi!ation> ins&lation s-e!ifi!ation> tra!in% s-e!ifi!ation and -aintin% s-e!ifi!ation. Tese are o&t-&t for every -art in te P1 file 'y defa< as well as in te eader se!tion of te P1 ?to esta'lis te 'aseline for te entire iso@. Weter te 'reaks are sown on te iso is a!t&ally !ontrolled 'y te AlternativeT#CT AlternativeT#CT val&es 'ein% set or not for ea! attri'&te. f te AT#CT AT#CT val&e is set to a nonn&ll strin%> te strin% is o&t-&t as a -refi$. e.%. or te isometri! sown 'elow> AT#CT 08" was set to 1ASS:

tem Pi-in% S-e!ifi!ation ns&lation SS-e!ifi!ation

Tra!in% S-e!ifi!ation Paintin% S-e!ifi!ation

Te

;al&e S-e! ame Sort Strin% ;al&e of ns&lation )aterial !ode list attri'&te Sort Strin% ;al&e of eat tra!in% ty-e !ode list attri'&te Sort Strin% ;al&e of 1oatin% ty-e !ode list attri'&te

AT#CT 08" 0"/

0"+ 0"0

mis!ellaneo&s or &serdefined s-e!ifi!ation attri'&tes are set &sin% la'els.

$3(.Labe&s.'isc$!ec Te mis!ellaneo&s attri'&tes are f&n!tionally identi!al to te standard attri'&tes> e$!e-t tat te &ser is a'le to set te val&e to watever attri'&te is desired. a'els are s-e!ified for ea! of te mis!ellaneo&s s-e!ifi!ations. Te la'els are eval&ated for ea! -i-in% -art and written into te P1 for ea! -art and into te eader. +. #dit ,-tions ,-tions for te te UserB style> style> e$-and e$-and te tree to find find S3D.a'els S3D.a'els.)is .)is!S-e! !S-e!

+/8 +/ 8


oti!e tat )S1SP#13 is already set to &se a la'el. owever> for tis a' we will !reate tis la'el n 1atalo% Task> 1reate a 1,) a'el named Pi-in% sometri! 1leanin% 9e&irementB as sown in -i!t&re and ma- te la'el !reated to )S1SP#13. or assistan!e in !reatin% tis a'el -lease !e!k wit yo&r nstr&!tor.

Te la'el is defined as 'elow. avi%ate to te r&n from te -art and sele!t te !leanin% re&irement.

3.

Te AT#CT !orres-ondin% to )S1SP#13 is n&m'ered 0"5. #$-and AlternativeTe$ts and s!roll down to noti!e tat te val&e for tis AT#CT is set to 1#A:

+/"


*.

Swit! to Pi-in% task> sele!t te -i-e r&n Unit+6P/+/0+1//3+ and set its !leanin% re&irement to 11+B

5.

Swit! 'a!k to Drawin%s and 9e-orts task and &-date drawin% for line +//0P. 1leanin% re&irements 'reak is sown as ' elow.

++/


Labe&s.Com!onenttts Tese la'els> if -resent in te style> are eval&ated for ea! -i-in% -art and written to te P1 file. Tis P1 file !an ten 'e read 'y Stress Analysis software s&! as 1A#SA9 .

dding Com!onent *ro!erties: +.

n tis a'> yo& will define additional !om-onent -ro-erties to 'e o&t-&t to te P1 file.

0.

Sele!t te UserB Style and &sin% a ri%t mo&se !li!k> sele!t #dit ,-tionsB

3.

#$-and te tree to find S3D.a'els.1om-onentAtts and ten !li!k te 'lank row and add 1om-onent Attri'&te  1,)P,#TATT92UT#+ from te dro- down list.

+++


*.

or a'el ame sele!t a'elsM.Ty-e of a'elsMPi-in%M#m'edded 1om-onent )aterial Des!ri-tionsMPort a'elsMS!ed&le Ti!kness +

5.

Add into ne$t row 1om-onent Attri'&te  1,)P,#TATT92UT#0

6.

or a'el ame a%ainst 1,)P,#TATT92UT#0 sele!t a'elsM.Ty-e of a'elsMPi-in%M#m'edded 1om-onent )aterial Des!ri-tionsMPort a'elsMS!ed&le Ti!kness 0

7.

Save to te !atalo% and &-date line +//+P.

8.

Sele!t te do!&ment and &sin% a ri%t mo&se !li!k> sele!t ;iew e$tra!tion data and review te P1 ile to see te S!ed&le ti!kness added to te !om-onents

++0


".

Tip: These properties could be placed in the material list, in a material report and may be of use for fabrication and stress analysis.

++3


Lab 1": 'ateria& List sometri! Drawin%s %eneration in SP3D as tree 'asi! o-tions for !onfi%&rin% te )aterial ist ?)T,@. Tese are +@ ixed K ittle &ser !ontrol over re-ort format. n PDS tis was known as a RSTG#+ )T, 0@ ?ariab&e K User !an s-e!ify !ol&mn eadin%s> !ontent and widt K te re-ort layo&t is !ara!ter 'ased ?PDS  STG#0@ 3@ ser (efined K most fle$i'le re-ort> !ol&mn eadin%s and %rid lines are -la!ed in 'a!kin% seet and !ol&mn -ositions are defined 'y !oordinates. Users are en!o&ra%ed to &se tis ty-e of )T,. ?PDS STG#3@ t is also -ossi'le to &se la'els to define attri'&tes. Several AlternativeTe$ts !an 'e set or &nset to modify te !ol&mn and se!tion eadin%s for te material list as well as to !ontrol if !ertain elements are sown at all.

'ateria& La%out )aterialist.i$ed As indi!ated> for i$ed ayo&t tere is a little &ser !ontrol over re-ort format. owever> !ertain attri'&tes on te material lists !an 'e modifiedadded s&! as eader Te$t> 4ro&- S&' eadin% et! &sin% AlternateTe$ts ?AT#CT@ 1) ,-en drawin% +//+P ?S,SIUser Drawin%sIA0IU/+IPro!essIUser@

2) n tis la' for tis i$ed ayo&t )aterial ist we will edit eader Te$t for Des!ri-tion> We will make &se of AT#CT 3/7> 3/8> 3/" to sow a %ro&- s&'eadin% &nder wi! Pi-es> ittin%s V lan%e are listed.

++*


3) #dit soJPi-eline style in ,-tion 2rowser and for Alternative Te$ts se!tion> modify te AT#CT 3/3> 3/7> 3/8 V 3/" as sown in te ima%e. TIP: A blank value for ATEXT ini!ate" that that "pe!ifi! ATEXT i" "uppre""e#

++5


$) U-date +//+P and o'serve tat eader te$t for des!ri-tion ad 'een !an%ed and also s&' %ro&-in% of te !om-onents are seen for PP#> TT4S and A4#S.

)aterialist.;aria'leayo&t Wen te style )aterialist.A!tiveist  ;aria'le> te so Drawin% will derive its )T, format from te )aterialist.;aria'leayo&t o-tions. #a! row in te )aterialist.;aria'leayo&t 1ol&mns list s-e!ifies a !ol&mn in te )T,. Te )aterialist.;aria'leayo&t.eaderine te$t is &sed for !ol&mn eadin%s.

++6


Wen a &ser formats a ;aria'leayo&t )T,> te followin% %&idelines so&ld 'e onored if well formated te$t is to 'e e$-e!ted. eave one or more free s-a!es 'etween individ&al !ol&mns. #a! 1ol&mn entry as a startin% -ostion and a widt. Ad=a!ent !ol&mns so&ld ave at least one ?+@ free s-a!e 'etween tem. So if yo&r first !ol&mn 'e%ins in -osition + and as a widt of 5 !ara!ters> te te$ts for tat !ol&mn will o!!&-y -ositions +5. f we leave a s-a!e 'etween tis !ol&mn and te ne$t ?-osition 6@> ten we wo&ld want to start te ne$t !ol&mn in -osition 7 or %reater. Use &meri! &stifi!ation for !ol&mns tat dis-lay de!imal n&meri! val&es. ;aria'le )T,Bs allow te =&stifi!ation of o&t-&t. )ost !ommonly eft =&stifi!ation is &sed> '&t tis !a&ses some -ro'lems for data tat is in te form of de!imal n&m'ers ?ty-i!ally -i-e len%ts@. Alias re!ommends te &se of &meri! =&stifi!ation for !ol&mns tat dis-lay de!imal n&meri! data. &meri! &stifi!ation will ali%n te te de!imal !ara!ters of n&m'ers> for im-roved reada'ility. W#4T is anoter e$am-le of an Attri'&te tat so&ld 'e formatted as &meri!. To see W#4T data in an )T,> yo& m&st set additional so ,-tions. 2efore W#4T !an 'e in!l&ded in te )aterial ist> te followin% o-tions m&st 'e set. )aterialist.#$!l&deWei%tData  AS# )aterialist.Wei%tsStyle  Total or ndivid&al. ote: f )aterialist.#$!l&deWei%tData is set to T9U# or if )aterialist.Wei%tsStyle is set to one> no wei%t will 'e dis-layed in te )aterial ist on te so Drawin%. Set te eaderine te$t AT#9 formattin% !ol&mns. Te )aterialist.eaderine o-tion is &sed to s-e!ify te !ol&mn eadin%s and also to define te T,TA widt ?in !ara!ters@ of te )T,. Te n&m'er of !ara!ters !an 'e !ontrolled 'y -la!in% a RX !ara!ter at te end of te line. so%en will &se te -osition of tis !ara!ter to !ontrol ow m&! s-a!e it reserves for te )T, ?wi! !an 'e -la!ed eiter on te ri%t or left and side of te drawin%> 'y settin% te -ro-erty 9i%tSide  Tr&e or alse@. Te drawin% area will 'e a&tomati!ally red&!ed to a!!ommodate te widt of te list.

++7

a'3: 1reatin% ew Style t is easiest to !reate tis in an editor &sin% a non-ro-ortional font> s&! as 1o&rier ew. n te te$t editor> first -la!e an inde$in% r&le to sow -osition n&m'ers ?R+03*5678"/ re-eated over and over@. ,n te ne$t line enter te te$t for te eader. Do ,T let te eader te$t for one !ol&mn overlay te 'o&ndary 'etween !ol&mns as &ne$-e!ted res<s may res<. A ty-i!al eader ine e$am-le for te followin% !ol&mn !onfi%&ration is sown 'elow:

ow in an editor> wit ew 1o&rier font> we enter te r&le line and ten te eader te$t 'elow it as yo& wis it to a--ear. f te eader te$t &ses two rows> enter tem on se-arate lines in te te$t editor> ali%ned as yo& wo&ld wis to see tem in te drawin%. 0 1 2 3 4 5 6 123456789012345678901234567890123456789012345678901234567890123 PT Component Size No. Description (N.S.) T! "T

e$t> we need to =oin te two lines so tat te te$t !an 'e -la!ed in te ,-tions 2rowser as te val&e of te )aterialist.;aria'leayo&t.eaderine o-tion. To do tis yo& m&st -la!e an endofline !ara!ter ?X@ followed 'y a !ontin&ation !ara!ter ?M@ in te last -osition defined on te first row. An endofline !ara!ter is also needed on te se!ond line in te same -ossition as te line a'over. Tis is -osition of te last !ara!ter of te last !ol&mn ?W#4T@. n tis e$am-le tat is -osition 6*. 0 1 2 3 4 5 6 1234567890123456789012345678901234567890123456789012345678901234 PT Component Size |\ No. Description (N.S.) T! "T |

oin te two lines so tat te te$t !an 'e -la!ed in te ,-tions 2rowser as te val&e of te )aterialist.;aria'leayo&t.eaderine o-tion. To do tis yo& m&st -la!e an endofline !ara!ter ?X@ followed 'y a !ontin&ation !ara!ter ?M@ in te last -osition defined on te first row. An endofline !ara!ter is also needed on te se!ond line in te same -osition as te line a'ove. Tis is -osition of te last !ara!ter of te last !ol&mn ?W#4T@. n tis e$am-le tat is -osition 6*. After &-datin% te drawin%s> te res<in% )T, will look as follows.

++8


ote: so%en as s-e!ial 'eavior for te Des!ri-tion attri'&te. nstead of tr&n!atin% te te$t at te s-e!ified n&m'er of !ara!ters> it will wra- te te$t on to as many lines as needed to dis-lay it all. f no widt is s-e!ified for te Des!ri-tion field> te -ro-erty Defa<Des!ri-tionWidt will 'e &sed to !ontrol te wra--in% of te$t. or e$am-le> wit Widt  30 !ara!ters

Widt  +/ !ara!ters

Lab +@ #dit ,-tion for te ser B style as sown 'elow.

++"


0@ #$-and )aterialist.;aria'leayo&t. ill in val&es as 'elow

3@ Set )aterialist.A!tiveist to ;aria'le

+0/


*@ 9efer te )aterialist.varia'leayo&t formattin% %&idelines to format eader ine 1ol&mns ,-en Word Pad and Ty-e in 1ol&mn eaders as sown in te ima%e 'elow:

5@ Set )aterialist.;aria'leayo&t.Te$tSiHe to CCar%e

6@ Set followin% o-tions to set Wei%tData S3D.)aterialist.#$!l&deWei%tData  AS#

+0+


)aterialist.Wei%tsStyle  Total or ndivid&al

7@ Set )aterialist.Te$tont  1o&rier new ?Tr&e Ty-e@

8@ U-date isometri! for line +//+P and o'serve te ormat of ;aria'le ayo&t

+00


a'els.)aterialist t is -ossi'le to add &- to +// &serdefined material list attri'&tes. Te la'el s-e!ified for ea! will 'e eval&ated for ea! -i-in% -art and te res< of te la'el will 'e written into te P1 and ten!e into te iso. a': +@ #$-and a'els.)aterialist and add a row 0@ Sele!t )AT#9AUS#9+ as a'elAttri'&te and 2rowse for a'el */+ as dis-layed in te -i!t&re 'elow:

+03


3@ #$-and )aterialist.;aria'leayo&t *@ 9e-la!e te !ol&mn .S. 'y )AT#9AUS#9+

5@ Save to !atalo% and &-date isometri! for line +//+P. ,'serve tat S!ed&le Ti!kness val&es are ret&rned instead of ominal SiHe.

+0*

a'3: 1reatin% ew Style )aterialist.UserDefined n a'> yo& are %oin% to !an%e te fi$ed format material list to a &ser defined style> &sin% fonts. +@ Sele!t te UsersoA0


0@ Sele!t te )aterialist and !an%e te a!tive list to User DefinedB

3@ #$-and te )aterialist se!tion and Sele!t )aterialist.UserDefined> !an%e StartC  +0> StartG  387> Te$tont  Arial?Tr&eTy-e@. *@ #$-and te )aterialist.UserDefined se!tion and Sele!t )aterialist.UserDefined.1ol&mn> add te followin% 5 entries:

+05


5@ Sele!t )aterialist.UserDefined.TwoSe!tion and !an%e Se!tion0G,ffset  +0/> Se!tion+)a$#ntries  0/> Se!tion0)a$#ntries  0/ 6@ Save te !an%es to te !atalo% 'y !li!kin% te Save to 1atalo%B i!on: 2rowser.


7@ U-date drawin% +//+P and o'serve UserDefined ayo&t on left side of te sometri!.

+06


'ateria& (escri!tion b% Labe& Several o-tions are availa'le to set )aterial Des!ri-tions &sin% la'els. Te o-tions a re: S3D.)aterialist.UserDefinedPi-e)aterialDes!ri-tion S3D.)aterialist.UserDefinedS&--ort)aterialDes!ri-tion S3D.)aterialist.UserDefined2olt)aterialDes!ri-tion S3D.)aterialist.UserDefined4asket)aterialDes!ri-tion S3D.)aterialist.UserDefinednstr&ment)aterialDes!ri-tion S3D.)aterialist.UserDefinedS-e!ialty)aterialDes!ri-tion S3D.)aterialist.UserDefined1lam-)aterialDes!ri-tion #a! of tese o-tions will> if set> re-ort te val&e ret&rned 'y te la'el as te des!ri-tion of te item.

+07


'ateria&List.CutList +@ Set )aterialist.1&tist.;isi'le to Tr&e and Set A!tiveist  i$ed.

0@ U-date isometri! for line +//0P and 1&t ist so&ld look as 'elow:

+08


Lab1: 6e&d O!tions SP3D allows weld n&m'ers to 'e sown on te isometri!. Te format for te weld n&m'ers is &ser defina'le as well. owever> sin!e SP3D mana%es welds in te model> some weld related so%en o-tions may not 'e a--li!a'le.

$euence we&ds To t&rn on weld n&m'erin%> first one m&st se&en!e te welds in a -i-eline. To do tis> +@ Swit! to te Pi-in% task. 0@ Sele!t te Se&en!e ,'=e!ts !ommand on te verti!al tool'ar and sele!t te +//+P -i-eline. 3@ 1li!k ,< to se&en!e welds

9urn on we&d numbers 1 Swit! to Drawin%s and 9e-orts task 2 #dit o-tions on te serIso2 style

3 Sear! for all weld related o-tions &sin% te word WeldB in te sear! 'o$ 4 Set Drawin%s.Welds.SowWeld&m'ers to Tr&e 5 U-date isometri! +//+P and see weld n&m'ers

" 1an%e weld n&m'erin% format  #dit ,-tions on serIso2 style

+0"

a'3: 1reatin% ew Style - Sele!t te o-tion $3(.(rawing.6e&ds.6e&d#umberLabe&  2rowse and assi%n la'el *i!ing Isometric 6e&d 9%!e and $euence #umber<

1 Save to !atalo% and &-date +//+P isometri!.

11 12 13 14

1an%e en!los&re for welds #dit ,-tions on User style Sele!t te o-tion Drawin%.Welds.a'Weld#n!los&re and !an%e to Diamond #nd Save to !atalo% and &-date +//0P isometri!.

+3/


6e&d List +. Swit! to Drawin%s and 9e-orts task 0. #dit o-tions on te serIso2 style

3.

)a- la'els &nder S3D.a'els.Weldist)a- se!tion as sown in te -i!t&re 'elow:

Te a'el for ma--in% !o&ld 'e fo&nd as seen in te ierar!y 'elow:

+3+


*.

Sele!t UserDefined list for Weldist.A!tiveist

5.

Position Weld Attri'&tes &nder Weldist.UserDefined

+30


U-date sometri! +//+P. t so&ld look as 'elow.

+33


Lab1-: (etai& $+etch &n!tionality to sow stati! detail sket!es is availa'le. De-endin% on te -art !lass of te o'=e!t sele!ted> a s-e!ified la'el is invoked> if te val&e ret&rned 'y te la'el mat!es te val&e s-e!ified to !e!k a%ainst> te sym'ol is sown on te isometri!. +.

,-en te Drawin%s #ditor in M1ommon0DMSa-e0DM2inMSa-e0DServer.e$e. Go& may !reate a sort!&t to tis file> name it Drawin% #ditorB and -&t it on yo&r deskto- for f&t&re &se 0. Start re!tan%le tool and draw a 5/ mm $ 5/ mm and an%le / re!tan%le. 3. Usin% te te$t 'o$ !ommand> -la!e te word D#TA &sin% 1o&rier ew font at 0 mm te$t siHe as sown 'elow at ?37> *7@ meas&red from te 'ottom left !orner of te s&are

*.

Draw yo&r detail sket! %ra-i!s in te s&are. #.%. draw a !ir!le and two lines

5. Sele!t All %ra-i!s &sin% #dit  Sele!t All 6. 7.

1reate ew Sym'ol &sin% te 1reate Sym'ol !ommand ?draw tool'ar@. Pla!e te ori%in of te sym'ol in te 'ottom left !orner of te re!tan%le

8. Save sym'ol to folder 1:MPro%ram ilesMSmartPlantM3D9efDataMSared!ontentMPmf%soStyleDataM wit name D#TA+.SG). #$it Drawin% #ditor. ".

#dit o-tions for te UserB style and !an%e S&--lementary.DetailSket!es.Pat to 'e 1:MPro%ram ilesMSmartPlantM3D9efDataMSared!ontentMPmf%soStyleDataM

+3*


+/. Set SowDetailSket! to Tr&e

++. ,-en S3D.S&--lementary.DetailSket!es.Sket!)a--in% +0. 1an%e A4#90.SG) to D#TA.sym V 1an%e Sket!1k;al&e to AssyJ;SJS9JD2J++6

+35


+3. Save to 1atalo% and &-date te line +//0P. A detail sket! will 'e sown in te to- ri%t !orner of te isometri!.

+36


Lab 1: $%mbo& 'a!!ing t is -ossi'le to ma- Part !lasses> S&--orts> Welds and #nd !onditions to distin!t so%en sym'ol keys. or -art !lasses> it is -ossi'le to s-e!ify different sym'ols for different end !onditions. t is also -ossi'le to s-e!ify tat te same S<#G so&ld 'e o&t-&t for all end !onditions and te end !onditions o&t-&t inde-endently.

'a!!ing $%mbo& De%s for Com!onents Part !lasses +@ U-date -i-eline S,SIUser Drawin%sIA0IU/0IPro!essI0//3P 0@ Te error lo% !ontains te followin% entry: Des!ri-tion: S<#G not o&nd for 1;ent&rimeter Part1lass dentifier not o&nd 3@ Te fa!e of te so also sows a messa%e to te effe!t tat te S<#G for te 1;ent&rimeter was not fo&nd.

*@ #dit ,-tions in UserB style 5@ Sele!t S3DISym'ol)APISym'ol)a-?+/57@ and add a new row 6@ #nter te followin% val&es to ma- te Part!lass CI?enturimeter to an so%en S<#G and 1om-onent !lass.

+37


7@ Save to !atalo% and re&-date 0//3P sometri!. Te S<#G error so&ld no lon%er 'e re-orted.

S&--orts +@ #dit ,-tions in te UserB style.

0@ Sele!t S3DISym'ol)APISym'ol)a-?+/57@ and s!roll down &ntil SUPP,9T is seen in te Part1lass !ol&mn. 3@ or an%er and S&--orts te #ndPre-1ode !orres-onds to te 1odeist&m'er of te n%S&-S&--ortTy-e !odelist.

+38


*@ 1an%e te S<#G in te row tat !orres-onds to #ndPre-1ode 5* to A4 ?54 !odelist val&e !orres-onds to ?ariab&e $!ring in n%S&-S&--ortTy-e !odelist @

+3"

a'3: 1reatin% ew Style 5@ Save to !atalo% and &-date line +//0P. Before: R;aria'le S-rin% ma--ed to S<#G R/+4R

fter : R;aria'le S-rin% ma--ed to S<#G RA4

6@ )ake s&re to !an%e ma--in% 'a!k to ori%inal S<#G ?/+4@.

+*/


Welds +@ #dit ,-tions in te UserB style

0@ Sele!t S3DISym'ol)APISym'ol)a-?+/57@ and s!roll down &ntil W#D is seen in te Part1lass !ol&mn. 3@ or welds te #ndPre-1ode !orres-onds to 1odeist&m'er of te WeldTy-e !odelist.

*@ 1an%e te S<#G in te row tat !orres-onds to #ndPre-1ode 5 ?So- Weld@ to WWA

+*+


5@ Save to !atalo% and &-date line +//0P. 2efore: So- Weld S<#G ma--ed to WW

After: So- Weld S<#G )a--ed to WWA

6@ )ake s&re to !an%e ma--in% 'a!k to ori%inal S<#G ?WW@.

+*0

a'3: 1reatin% ew Style Sym'ol)a-.S&--lement +@ #dit ,-tions in te UserB style

0@ #$-land S3DISym'ol)APIS&--lementIS&--lement?63@ 3@ 1an%e te #ndPre-)a- in te row tat !orres-onds to #ndPre-1ode 3/+ from 2# ?2eveled #nd@ to SW ?So!ket W elded #nd@

*@ Save to !atalo% and &-date line +//0P. oti!e 2eveled #nds re-resented as So!ket Welded #nds

+*3

a'3: 1reatin% ew Style 2efore: 3/+ #ndPre-1ode ma--ed to S<#G ?2W@

After: 3/+ #ndPre-1ode ma--ed to S<#G ?SW@

5@ )ake s&re to !an%e ma--in% 'a!k to ori%inal S<#G ?2W@.

+**


Create a new s%mbo& +e% $mart*&ant $%mbo& >ditor -rovides -rovides a &serfriendly interfa!e in wi! yo& !an easily !reate new or modify e$istin% C)'ased or AS1 sym'ol files for &se in S,4# drawin%s. Te software allows yo& to %ra-i!ally define and modify a !om-onent> and ten e$-ort te sym'ol to an S,4# AS1 AS1 file so tat it !an 'e &sed in te isometri! drawin%s yo& %enerate wit SmartPlant 3D SmartPlant Sym'ol #ditor is delivered on nter%ra- e1&stomer we'site. +@ 1li!k 1li!k Sym'ol Sym'ol #ditor #ditor.e$ .e$e e from deskto deskto- to la&n! la&n! te te $mart*&ant $%mbo& >ditor . 0@ rom i'rary i'rary #$-lorer> #$-lorer> e$-and to All Sym'olsI;alvesI2asi Sym'olsI;alvesI2asi! ! ;alveI;;Y ;alveI;;YYY

3@ 9i%t 9i%t 1li!k 1li!k ;;YY ;;YY and and sele!t sele!t ew ew Sym'o Sym'oll

*@ n ew Sym'ol Sym'ol form> s-e!ify S<#G S<#G ;;YY> ;;YY> T&rn T&rn on te 1e!k 2o$ 2o$ to 1o-y ori%inal sym'ol sym'ol 4ra-i!s 2y S-e!ifyin% same S<#G ;;YY in te ew Sym'ol dialo%> we are redefinin% an e$istin% System Sym'ol.

+*5 +* 5


5@ Te Librar% >x!&orer &ses !olor to distin%&is 'etween system sym'ols ?tat ave not 'een redefined@ and !&stomiHed sym'ols. System sym'ols dis-lay in 'la!k te$t> wereas !&stomiHed sym'ols dis-lay in 'l&e te$t. 1li!k ,< on te form. ,'serve tat sin!e te System Sym'ol is 'ein% redefined> te !olor !an%es to 2l&e.

6@ ,n te te ri%t> ri%t> Sym'ol Sym'ol 4ra-i!s 4ra-i!s wo&ld wo&ld 'e 'e seen as 'elow: 'elow:

7@ ow> ow> we will will makes makes some some !an%es !an%es to to te Sym'ol Sym'ol 4ra-i 4ra-i!s !s Sele!t te ;alve ;alve Sym'ol and o'serve tat 4ra-i!s are all in one 4ro&-. So will we &n%ro&- te sym'ol first. 1li!k te Sym'ol and from Sym'ol )en&> sele!t Un%ro&- !ommand

+*6 +* 6


8@ Sele!t Sele!t ine Se%ment Se%ment and delete delete te lines lines ?#ditIDel ?#ditIDelete@ ete@ as sown sown in te ima%e ima%e 'elow: 'elow:

+*7 +* 7

a'3: 1reatin% ew Style "@ Draw some new lines to !an%e te re-resentation of sym'ol. 1li!k Sym'olIDraw ine or 1li!k from 9i''on 2arIDraw ine

+/@ Draw new lines from te Start Point ?4reen Dot@ to look like a lan%ed #nd

+*8


++@ Similarly> draw te lines at te #nd Point ?9ed Dot@

+*"


+0@ ow> )ove te end -oints of te line ?i%lited in red@ towards te inner ed%e of te flan%e

After lines are re-ositioned> te sym'ol wo&ld look as 'elow:

+5/


+3@ Draw a 1ir!le to te !enter of te ;alve Sym'ol.

+*@ #$-ort Sym'ols AS1 to NTrainin% Sym'olsOMPmf%soStyleData

+5+


+5@ #$it te Sym'ol #ditor. +6@ ,-en S3D Session +7@ #dit ,-tions in te UserB style

+8@ n S&--lementary.Datailes.Datailes?0@> add a new row> sele!t AS1SG)2,S from dro- down list &nder ileTy-e !ol&mn. or ile Pat> 2rowse for 1&stomS<#G.AS1 file tat ad 'een saved in ste- +*

+50


+"@ 4ate;alve 4ate;alve inserted on Pi-eline Pi-eline +//+P is ma--ed to S<#G S<#G ;;YY

0/@ U-date +//+P and see if !an%es made to te te S<#G ;;YY ;;YY for 4ate;alve 4ate;alve is refle!ted. refle!ted.

,ri%inal ;;YY:

)odified ;;YY

+53 +5 3


Lab 2: Circu&ar or rc *i!es Go& &se te 8oute *i!e !ommand *i!e !ommand ri''on to model ar! -i-es> s&! as mi%t 'e needed in 4as T&r'ines T&r'ines or in te &!lear ind&stry for !arryin% fl&ids. Te sometri! for s&! !&rved -i-es wo&ld re&ire settin% some o-tions relevant to !&rved -i-es. n tis a'> yo& wo&ld not 'e ro&tin% 1ir!&larAr! Pi-in%> '&t wo&ld Paste from !atalo% 1ir!&lar -i-es ?already !o-ied to !atalo%@ as instr&!ted in te ste-s 'elow: +. Define Define Works-a!e Works-a!e &sin% &sin% Plant Plant ilter ilterITr ITrainin ainin% % iltersIU iltersIU/3 /3 0. )ake )ake s&re s&re PinPo PinPoint int is ena'le ena'led. d.

3. ;erify ;erify te te 1oordinate 1oordinate System System sele!ted sele!ted is 4lo'al 4lo'alBB on te Pin Pin Point ri''on ri''on 'ar. 'ar. *. 5. #dit #dit )en& )en& and and !li!k !li!k Past Paste e from from 1ata 1atalo% lo%

6.

rom )od&les ierar!y> ierar!y> 2rowse )od&lesITrainin%IPi-in% )od&lesITrainin%IPi-in% 1lass and and sele!t 1ir!&lar Pi-es

+5* +5 *


7.
8. t wo&ld wo&ld -rom-t -rom-t to Define Define a Pla!ement Pla!ement PointB. PointB. S-e!ify and lo!k # />  / and # / on te Pin Point !oordinates. ?int: Go& Go& !an it #nter after ea! entry to lo!k te 1oordinates@

1li!k anywere in te s-a!e and te Pi-elines wo&ld i%li%t and -la!e as seen in 'elow -i!t&re:

+55 +5 5


".

ow sin!e 1ir!&lar Pi-eline is -la!ed in te model aro&nd a vessel> we wo&ld now %enerate sometri! for tis 1ir!&lar -i-eline.

+/. Swit! Task to Drawin%s V 9e-orts ++. #$-and> S,SIUser Drawin%sIA0IU/3IWater> 9i%t 1li!k UserB and #dit o-tions to ,-en ,-tion 2rowser

+0. Ty-e in 1&rveB in te sear! 'o$> to ret&rn o-tions related to 1&rved Pi-es Set val&es for te listed o-tions as 'elow: Drawin%.Dimensions.1&rvedPi-eDimensionin%  Standard Drawin%.ormat.1&rvedPi-eAn%leStyle  Wit Dimension Drawin%.ormat.1&rvedPi-e9adi&sStyle  )essa%e Drawin%.ormat.1&rveTresold  5.//

+3. Save ,-tions to 1atalo% and #$it ,-tion 2rowser +*. 9i%t 1li!k UserB Style and 1reate Drawin%s. Drawin%s for Pi-elines &nder Pi-in% System WaterB wo&ld 'e !reated.

+56


+5. U-date 1&rvedPi-esB so Drawin%. sometri! so&ld look as 'elow.

+57


Lab 21:'u&ti7*ort Com!onents 4eneratin% sometri!s for !om-onent wit m<i-le -orts re&ires a s-e!ial S<#G ma--in% and its !onfi%&ration. Tis la' wo&ld el- in &nderstandin% )<iPort !om-onents and its sometri! !onfi%&ration A R)<i-ortDia5Way,-tions valve from 2io Parm 1atalo%.$ls ?delivered as sam-le data@ is &sed as an e$am-le for tis la'.

Ste-s: +. Defined Works-a!e &sin% ilter K Plant ilterITrainin% iltersIU/+ 0. Tools )en& K T&rn on PinPoint

3. #dit )en& K 1li!k Paste from 1atalo%

+58


Sele!t )<i-ort from )od&lesITrainin%IPi-in% 1lassI and 1li!k ,<

5.

1li!k ,< for System ierar!y sele!tion wi! so&ld 'e Pro!ess

6.

Define a Pla!ement -oint 'y keyin% in #/>  /> #  / on te Pin Point 9i''on 'ar and sele!t anywere on te s!reen to -aste te R)<i-ort -i-eline from 1atalo%

+5"


)<i-ort Pi-eline so&ld 'e !o-ied &nder A0IU/+IPro!essI

8.

,'serve te )<i-ort !om-onent ?R)<i-ortDia5Way,-tions@ wit 5 Pi-e 9&n on one side and + Pi-e 9&n on oter side of te !om-onent. ow> we need to !onfi%&re sometri! ,-tion 'y s-e!ifyin% a S<#G for tis !om-onent K Part 1lass of te !om-onent is R)<i-ortDia5Way,-tions

". Swit! to Drawin%s and 9e-ort Task. +/. 9i%t 1li!k RUser style &nder User Drawin%sIA0IU/+IPro!essIUser and 1li!k 1reate Drawin%s. Te 1reate Drawin% !ommand wo&ld !reate a new Drawin% for te )<i-ort Pi-eline we =&st !reated-asted from !atalo% in -revio&s ste-s.

+6/

a'3: 1reatin% ew Style ++. )<i-ort Drawin% wo&ld 'e !reated as 'elow:

+0. 2efore we &-date )<i-ort sometri!> we need to make !an%es in ,-tions. #ditI ,-tion on RUser Style +3. )a- S3DPart1lass R)<i-ortDia5Way,-tions to #ndPre-1odeS<#G /> S<#G  C;YY and 1om-onent1lass  )UTP,9T1,)P,#T Ti-: 4o to te very 'ottom 'lank row in Sym'ol)a- and add te information.

+*. Save te o-tions to 1atalo%.

+5. 1lose ,-tion 2rowser. +6. U-date R)<iPort sometri! +7. sometri! so&ld look as 'elow:

+6+


+60


Lab22: *ersona& Isogen *re7*rocessor0*ost7 *rocessor Tis la' demonstrates> &sa%e of Personal so%en PrePro!essor -ro%ram to enan!emodify a P1 after P1 is %enerated and 'efore P1 is fed to so%en for f&rter -ro!essin%. so%en PrePro!essor ?S,4#Pro!essor.e$e@ at r&ntime looks for a ST file avin% -at to an e$e a--li!ation named #nan!e.e$e. #nan!e.e$e as te lo%i! to addmodifydelete attri'&tes from P1. ,'=e!tive of tis a' is to modify 'elow attri'&tes in te P1 and o'serve te res<s on te fa!e of sometri! Drawin%: or a 4ate ;alve wit T#)1,D# R ?,B,(E(FFFF$ We need S<#G ;;YY !an%ed to ;4YY

We need T#)D#S19PT, R4ate valve> 1+5/> 9#> 22> ,SVG> AST)A0+6W12> trim 8> 1rane *7 !an%ed to ETest ;alveE

We need Pi-eline ATT92UT#8 ?l&id 1ode@ *G *rocess !an%ed to 6G 6ater

+63


Ste-s: +. Save sometri! +//+P ?SA and P1@

+6*


0.

,-en saved P1 in note-ad> and !e!k e$istin% attri'&tes ?S<#G and T#)D#S19PT,@ for te 4ate ;alve

1e!k Pi-eline ATT92UT#8 ?l&id 1ode@> it so&ld 'e P> P9,1#SS.

3.

,-en saved sometri! SA> and !e!k S<#G re-resentation for te 4ate ;alve wi! so&ld look like ;;YY

+65


1e!k e$istin% 4ate ;alve Des!ri-tion in )T, se!tion.

;erify Pi-eline ATT92UT# 8 ?l&id 1ode@ wi! so&ld 'e P> Pro!ess.

+66


*.

9i%t 1li!k on S,SIUserDrawin%sIA0IU/+IPro!essIUser and #dit to o-en sometri! ,-tion 2rowser

5.

4o to ,-tions &nder soJPi-eline.S&--lementary.A&$iliaryPro%rams or StartPro%ram> 2rowse and ma- S,4#Pro!essor.e$e lo!ated at 1:MPro%ram ilesMSmartPlantM3D9efDataMSared1ontentMPmf%soStyleDataM#nan!eP1M S,4#Pro!essor.e$e

6. Save and !lose ,-tion 2rowser. 7. ,-en folder at 1:MPro%ram ilesMSmartPlantM3D9efDataMSared1ontentMPmf%soStyleDataM#nan!eP1M 2elow files so&ld e$ist in te folder yo& o-ened.

+67


P9#P9,1#SS,9.ST file so&ld ave f&ll -at to #nan!eJP1.e$e

".

,-en #nan!eJP1.$ls to review attri'&tes tat as to 'e re-la!ed.. Data in $chema seet as a !ondition for a ;A;# wit T#)1,D# tat wo&ld 'e eval&ated for !riteria s-e!ified in Com!onent *ro!erties Seet

;A;# wit its T#)1,D# s-e!ified in tis Com!onent *ro!erties Seet wo&ld 'e mat!ed in P1 at r&ntime f tere is ;A;# wit T#)1,D# R ?,B,(E(FFFF$ fo&nd> -ro-erties !ol&mns s&! as S<#G> T#)D#S19PT, et!. wo&ld 'e sear!ed for and if tese -ro-erties are fo&nd it wo&ld modify or if not fo&nd it wo&ld add te val&es from tis seet.

+68

a'3: 1reatin% ew Style *i!e&ine *ro!erties seet: ATT92UT#8 for Pi-eline +//+P wo&ld 'e re-la!ed in P1 wit W> Water

1lose te #nan!eJP1.$ls. +/. U-date +//+P. #dit and o'serve te !an%es. Te !an%es so&ld see as 'elow:

+6"


+7/


Lab23: 8eference *&anes Te 9eferen!e Planes o-tion -rovides te a'ility to referen!e virt&al -lanes for !oordinate !allo&ts on isometri! drawin%s. Definition of te -lanes is in a file wit Y.9PD e$tension or tis a'> a 9eferen!e -lane file ?9efPlanes.9PD@ is already !reated wit some -redefined vol&mes and itBs C>G>Q -lanes. +@ 9i%t 1li!k on S,SIUserDrawin%sIA0IU/+IPro!essIUser and #dit to o-en sometri! ,-tion 2rowser

0@ 4o to S&--lementary.9eferen!ePlanes o-tion.

+7+


3@ *@ 5@ 6@

1an%e R#na'led val&e to Tr&e. or te file Pat> -oint to te NTrainin% Sym'olsOMPmf%soStyleDataM9efPlanes.9PD. 1an%e te 1oordStyle and 1oordStyleAto!ationPts val&e to 9elative 1oordinates. 4o to Alternative Te$ts and set ATe$t 3"8 to ;, L

7@ Save !an%es to te ,-tions 2rowser and !lose te 'rowser. 8@ U-date Drawin% +//+P "@ oti!e tat te ;ol&me name ?U/+@ listed in te 9ef-lanes.9PD is now sown in te !oordinate reado&t. Also note tat te !oordinates are listed as d istan!es from C> G and Q -lanes of te relevant vol&me. ;ol&me and its Planes for Unit U/+ s-e!ified in 9ef-lanes.9PD file.

1oordinates wo&ld 'e seen as sown in te -i!t&re 'elow:

+70


Si$ Alternative Te$t re!ords ave 'een assi%ned to o&t-&t 9elative dire!tions ?**3>***>**5>**6> **7>**8@ Z is s&'stit&ted wit te 9eferen!e Plane ame L is s&'stitited wit te distan!e from te nearest 9eferen!e Plane

+73

a'3: 1reatin% ew Style A ty-i!al 9PD file wo&ld look as 'elow:

+7*


Lab24: *erformance na&%sis 9oo& sometri! Performan!e lo% Analyser is a tool wi! -rovides an easy metod of identifyin% la'elsfilersre-ort !ontri'&tin% to -oor -erforman!e of sometri!s. n %eneral> if a s-e!ifi! attri'&te from )odel1atalo% is to 'e seen on sometri!> a'els are !reated in 1atalo% and !onfi%&red witin sometri! ,-tion 2rowser to dis-lay te -ro-erty val&es ret&rned 'y te la'el on sometri! drawin%)T,1&t iste&tral ileDrawin% rame and so on. n -ro!ess of !reatin% tese la'els> sometimes &ser may &nknowin%ly !reate s-e!ifi! la'els tat mi%t introd&!e a &%e im-a!t on -erforman!e of sometri!s. A %ood e$am-le of s&! -oor la'el wo&ld 'e a S( la'el. t is re!ommended to avoid &sin% S( a'els in sometri! ,-tion 2rowser. 1,) la'els are always te 'est !oi!e for o&t-&ts. f 1,) a'els are limited for some s-e!ifi! -ro-erties> ;2 a'el so&ld 'e !onsidered as a ne$t o-tion after 1,) a'el. Te -erforman!e !an also ave im-a!t from filters and re-orts tat are ma--ed in sometri! ,-tion 2rowser. So tis tool el-s in identifyin% -oor filters and 9e-orts too. sometri! Performan!e lo% Analyser !an 'e d ownloaded from e1&stomer we'site. or more details -lease !e!k wit yo&r nstr&!tor or lo% a Servi!e 9e&est on SP3D S&--ort. Tis la' wo&ld %ive yo& andson e$-erien!e on settin% &- te tool and on dia%nosin% te lo%s. +.

or tis trainin% la'> te sometri! Performan!e lo% Analyser ?sometri!Perfo%Analyser.e$e@ is ke-t at [Sared1ontentIMPmf%soStyleDataMPmf%soStyleDataMsometri!Perfo%Analyser.e$e

0. Set&- an environment varia'le !alled RP#9JS1#A9, as sown in te -i!t&res 'elow: ;aria'le val&e is te filename of te lo% file. or e.%.> f te val&e is RP#9so> lo% file wit named as JP#9so.-l% will 'e !reated in T#)P a@ Ste-s in Windows 7 for settin% &- environment varia'le: 9i%t 1li!k R1om-&ter I Pro-erties

+75

a'3: 1reatin% ew Style '@ Sele!t Advan!ed System settin%s

!@

Under Advan!e Ta'> 1li!k #nvironment ;aria'les

d@ 1reate a new System ;aria'le !alled RP#9JS1#A9, and ;aria'le val&e as RP#9so

+76

a'3: 1reatin% ew Style 3. *. 5. 6. 7.

,-en S3D session and &-date one or many sometri!s tat yo& want to analyse 1lose S3D session. Go&Bll find te JP#9so.-l% file in T#)P. 1o-y it to anoter folder and %ive it a s&ita'le name ?e.%. Trainin%.-l%@. 9&n soPerfo%Analyser.e$e from [Sared1ontentIMPmf%soStyleDataMPmf%soStyleDataMsometri!Perfo%Analyser.e$e and 'rowse to te folder !ontainin% te Y.-l% file. 8. Sele!t te lo% file from te dro- down list and o'serve te !a-t&red data for &m'er of sometri!s> Time to e$e!&te te total n&m'er of sometri!s> Avera%e time -er so> ndivid&al a'el names> Per!ent and Time.

Te !olo&rs indi!ate la'elsfiltersre-orts tat take a si%nifi!ant -ro-ortion of te time. 9ed I 0/ Gellow I +/ Dark 4reen I 5 4reen I +. ".

n tis Trainin% -lant> tere are not any -oor -erformin% la'elsMfiltersMre-orts> owever it %ives yo& a 'asi! idea of ow te tool is f&n!tionin% and ow it dis-lays data a'o&t a'elsMiltersM9e-orts names> a!t&al time and its overall -e r!enta%e. +/. ,n!e done Analysin% te tool> Disa'le -erforman!e lo%%in% 'y =&st removin% or renamin% te environment varia'le. Additional Points to 9ememe'er: •

•

•

S3D will a--end to J %PE&' JS1#A9,I.-l% every time it is r&n so itBs 'est to delete it o&t of T#)P 'efore yo& r&n S3D. soPerfo%Analyser modifies te lo% files in te folder yo& -oint it at and !reates R.!sv files. f te lo% file yo& !o-y into te folder is !alled> f or e$am-le> Rtest.-l% ten it will try to !reate Rtest.!sv. f Rtest.!sv already e$ists ten it will do notin%. Always !lose S3D 'efore !o-yin% te lo% file. Te lo% will not 'e !om-letely written to disk &ntil S3D is !losed

+77


Lab25: 6B$ Isometrics Sin%le seet isometri!s !an 'e e$tra!ted &sin% te work 'reakdown str&!t&re. or tis a style is already s&--lied> '&t a -a!ka%e needs to 'e !reated.

Creating a 6B$ !ac+age +. Swit! to Drawin%s and 9e-orts task. 0. Add a new folder &nder te root of te -lant !alled Pa!ka%esB. ?Tis folder was !reated in a'5@ 3. 9i%t!li!k on Pa!ka%es folder and add a new Pi-in% sometri! Drawin%s 'y (&ery !om-onent. 9ename te !om-onent so W 2SB *. Set&-F so W2S and in te filter field sele!t )oreF 5. #$-and te tree till te 1ommonB folder as sown in te -i!t&re

6.

1reate a new filter named 4ro&- so Drawin%B tat sele!t W2S items of te Ty-e so Drawin%s a'ri!ationB 'y sele!tin% te followin% ,'=e!t Ty-e: ?1ommon K W2S tems@ Pro-erties: ?1ommon K W2S tems@ K Dire!t Pro-erty of ,'=e!t Ty-e K ?W2S P&r-ose@  so Drawin% a'ri!ation

+78


+7"


7. Sele!t te filter to &se it in te -a!ka%e 8. n te style field> sele!t te style soJW2SB ". Save Pa!ka%e as so W2SB

+8/


Creating Isometric (rawings b% 'anua&&% ssigning ObHects 1reate isometri! drawin%s for te -i-eline 437* in Unit 4 of yo&r works-a!e 'y man&ally assi%nin% -i-in% -arts to te !reated W2S items. After !reatin% te isometri! drawin% for te !reated W2S items te view will resem'le i%&re +.

Figure 1: Output: Isometric Drawing for the WBS Group of Pipeline 40!P

2efore 'e%innin% te -ro!ed&re for !reatin% isometri! drawin%> !laim all te -i-in% o'=e!ts of a -i-eline 437* of Unit 4 to an a!tive -ro=e!t *E7 for assi%nin% -i-in% o'=e!ts to a!tive -ro=e!t. Ten man&ally !reate a W2S item &nder te a!tive -ro=e!t and assi%n all te -i-in% o'=e!ts to te !reated W2S item.

Steps: 2efore 'e%innin% te -ro!ed&re: +. Define yo&r works-a!e to dis-lay Unit 4G !oordinate system 4 C$G and *roHects in te 6B$ ierar!y. n yo&r trainin% -lant> sele!t 4 and 6B$ Items !om-o&nd filter from *&ant i&ters I 9raining i&ters in te $e&ect i&ter dialo% 'o$. 0. )ake s&re yo& are in te *i!ing task and te A!tive Permission 4ro&- is set to *i!ing.

+8+


'anua&&% ssigning *i!ing ObHects to an ctie *roHect: +. Sele!t te && o-tion in te Locate i&ter dro-down list. 0. n te 6or+s!ace >x!&orer window> e$-and te ierar!y 2 I 4 I *rocess. 3. 9i%t!li!k te -i-eline system 437* and !li!k te $e&ect #ested !ommand in te men&> to sele!t all te -i-in% o'=e!ts in te %ra-i! view. *. Sele!t te 'ore o-tion in te ctie *roHect dro-down list on te tool'ar to s-e!ify te a!tive -ro=e!t. 5. Te ctie *roHect dialo% 'o$ a--ears. Sele!t te (atabase o-tion to see all te W2S -ro=e!ts in te dialo% 'o$ and ten sele!t *E7> to s-e!ify *E7 as an a!tive -ro=e!t. 6. 1li!k OD on te ctie *roHect dialo% 'o$. Te sele!ted a!tive -ro=e!t so&ld dis-lay. 7. Sele!t te *roHect I C&aim !ommand> to asso!iate te sele!ted -i-in% o'=e!ts wit te a!tive -ro=e!t *E7. 8.

After te !laim -ro!ess is !om-lete> SP3D dis-lays te C&aim dialo% 'o$. 1li!k C&ose to !lose te dialo% 'o$.

'anua&&% ssigning *i!ing ObHects to 6B$ item: +.

n te Works-a!e #$-lorer> sele!t te W2S ta' and e$-and P"" I so a'ri!ation.

0.

9i%t!li!k te so a'ri!ation system in te Works-a!e #$-lorer and sele!t te 1reate W2S tem !ommand from te men&> to !reate a new W2S item in te system so a'ri!ation.

3.

Sele!t te -ro-erty s-e!ifi!ations> and !li!k ,<. • • • • • • •

W2S Ty-e: 4ro&W2S P&r-ose: so Drawin% K a'ri!ation #$!l&sive: Tr&e W2S Assi%nment: System ame P""/+ ame9&le: User Defined 1orrelation 2asis: 1orrelate o'=e!t

*.

n te Works-a!e #$-lorer window> sele!t te System ta' to e$-and A0 I U/* I Pro!ess and sele!t te -i-eline system */3P. Tis will sele!t te -i-eline */3P in te %ra-i! view.

5.

Sele!t te Pro=e!t I Assi%n to W2SF !ommand. Tis !ommand !reates a relationsi- 'etween all te !om-onents of te sele!ted -i-eline system and a sele!ted W2S item.

6.

Te Assi%n to W2S dialo% 'o$ a--ears. n te Assi%n to W2S dialo% 'o$> e$-and P""Iso a'ri!ation and sele!t te W2S item P""/+ to wi! te -i-in% o'=e!ts need to 'e assi%ned. Ten> !li!k ,<.

7.

Sele!t te W2S ta' in te Works-a!e #$-lorer. #$-and P"" I so a'ri!ation. 9i%t!li!k P"" /+ and !li!k te Sele!t ested !ommand in te men&. Te  i%li%ted o'=e!ts in te %ra-i! view are assi%ned to te P""/+ W2S item.

+80

a'3: 1reatin% ew Style 8. 1reatin% sometri! Drawin% from W2S item: ".

Swit! to te Drawin%s and 9e-orts task from te Tasks I Drawin%s and 9e-orts !ommand to !reate isometri! drawin%s for te !reated W2S items.

+/. n te )ana%ement 1onsole> e$-and te drawin% ierar!y to Unit /+ I sometri!s I so W2S sometri!s. 9i%t !li!k te so W2S sometri! !om-onent and sele!t Set &-. n te -a!ka%e sele!t so W2SB and in ilter sele!t RP""?W2S@ lo!ated &nder Plant iltersITrainin% ilters. it ,<. A%ain 9i%t !li!k te so W2S sometri! !om-onent and 9&n (&ery o-tion. ++. ow ri%t!li!k te so W2S Pa!ka%e &nder so W2S sometri!s I P"" I so a'ri!ation and !li!k te 1reate Drawin%?s@ o-tion to !reate te isometri! drawin% do!&ments. +0. 9i%t!li!k te so W2S Pa!ka%e isometri! drawin% ty-e and !li!k te U-date ow o-tion to &-date te drawin%s for te W2S %ro&-. After te &-date -ro!ess is !om-lete> do&'le!li!k te isometri! drawin%s !reated for te W2S item.

+83


Creating Isometric (rawings b% utomatica&&% ssigning ObHects 1reate isometri! drawin%s for te -i-e -arts 'elon%in% to te -i-eline 117* in Unit 1 of yo&r works-a!e 'y a&tomati!ally assi%nin% -i-in% -arts to te !reated W2S items. After !reatin% te isometri! drawin% for te !reated W 2S items te view will resem'le i%&res 0 and 3.

i%&re 0: ,&t-&t: sometri! Drawin% for te irst W2S 4ro&-

+8*


i%&re 3: ,&t-&t: sometri! Drawin% for te Se!ond W 2S 4ro&2efore 'e%innin% te -ro!ed&re for !reatin% isometri! drawin%> yo& will first !laim and man&ally assi%n -i-in% o'=e!ts to an a!tive -ro=e!t. Go& !laim all te o'=e!ts to a W2S -ro=e!t 'efore yo& r&n te )rou! *i!e *arts !ommand on te o'=e!ts to a&tomati!ally assi%n tem to !reate W2S item. Ste-s: 2efore 'e%innin% te -ro!ed&re: +. Define yo&r works-a!e to dis-lay Unit U/+> !oordinate system U/+ 1S> and Pro=e!ts in te W2S ierar!y. n yo&r trainin% -lant> sele!t U/+ and W2S tems !om-o&nd filter from Plant ilters I Trainin% ilters in te Sele!t ilter dialo% 'o$. 0. )ake s&re yo& are in te Pi-in% task and te A!tive Permission 4ro&- is set to Pi-in%.

'anua&&% ssigning *i!ing ObHects to ctie *roHect: Assi%n all te -i-in% o'=e!ts of -i-eline +//+P to an a!tive -ro=e!t P"" in Unit U/+ of yo&r works-a!e. +. n te Pi-in% task> sele!t te *i!ing *arts o-tion in te Locate i&ter dro-down list on te Common tool'ar to sele!t only te -i-in% -arts in te %ra-i! view. 0. Use te Inside fence o-tion on te Common tool'ar to sele!t all -i-in% -arts 'elon%in% to te -i-eline 117* and sele!t te -i-in% -arts. 3. To s-e!ify te ctie *roHect> sele!t te 'ore o-tion in te ctie *roHect dro-down list on te main tool'ar.

+85


*. Te ctie *roHect dialo% 'o$ a--ears. Sele!t te (atabase o-tion to see all te W2S -ro=e!ts in te dialo% 'o$. And ten sele!t *E7 to s-e!ify *E7 as an a!tive -ro=e!t. 5. 1li!k OD in te ctie *roHect dialo% 'o$. Te sele!ted a!tive -ro=e!t so&ld a--ear> on te main tool'ar. 6. Sele!t te *roHect A C&aim !ommand to asso!iate te sele!ted -i-in% o'=e!ts wit te a!tive -ro=e!t *E7. 7.

After te !laim -ro!ess is !om-lete> SP3D dis-lays te C&aim dialo% 'o$. 1li!k C&ose to !lose te dialo% 'o$.

A&tomati!ally Assi%nin% Pi-in% ,'=e!ts to te 1reated W2S tems: 4ro&- te -i-in% -arts into d is!rete sets 'y &sin% teir -ro-erties in a la'el definition &ery. n tis !ase> te dis!rete sets are te W2S items. Use te followin% s-e!ifi!ations for te &ery &-on wi! te %ro&-in% of o'=e!ts will 'e 'ased: sometri! Seet &m'er: Pi-e Part attri'&te +. Sele!t te -i-in% -arts of te -i-eline 117*> as sown in i%&re *> to assi%n tem to isometri! seet n&m'er .

Figure 4: Piping Parts of Pipeline 1001!P 0.

9i%t!li!k te sele!ted -arts and o-en te -ro-erties dialo% 'o$ to assi%n te sele!ted -i-in% -arts to an isometri! seet n&m'er  for !reatin% an isometri! drawin%. and !li!k OD.

3.

ow sele!t te remainin% -i-e -arts 'elon%in% to 117*> as sown in i%&re 5.

+86


Figure ": #emaining Selecte$ Part of Pipeline 1001!P *.

9i%t!li!k te sele!ted -i-e -arts and o-en te $e&ection *ro!erties dialo% 'o$ to assi%n tem to anoter isometri! seet n&m'er B for !reatin% an isometri! drawin%. and !li!k OD.

5.

ow to assi%n tese -i-e -arts to te a--ro-riate W2S items> sele!t te )rou! *i!e *arts '&tton on te verti!al tool'ar.

6. Te utomated 6B$ Creation dialo% 'o$ a--ears. Set te followin% s-e!ifi!ations in tis dialo% 'o$> and !li!k OD: • • • • • • • •

7.

W2S A&tomated 1reation 9&le ame: W2S so a'ri!ation ame 9&le: a'el ame 9&le (&ery a'el: W2S so 4ro&-in% (&ery a'ri!ation Dis!rimination ilter: U/+ W2S temBs Parent: so a'ri!ation )a$im&m &m'er ,f ,'=e!ts: +// P&ll n Asso!iated tems: 1onne!tion and 9e-orta'le )aintain #$istin% W2S temsL: Tr&e

SP3D -rom-ts yo& to view te lo% file on!e te -ro!ess is !om-lete. 1li!k #o to !lose te lo% dialo% 'o$ and !li!k Cance& on te utomated 6B$ Creation dialo% 'o$. Two W2S items are !reated in te W2S ierar!y. Sele!t te 6B$ ta' in te 6or+s!ace >x!&orer to view te W2S item Iso abrication.

8. Set te Locate i&ter to LL. 9i%t!li!k te W2S item *711771 in te 6or+s!ace >x!&orer and sele!t te $e&ect #ested o-tion to i%li%t all te -i-e -arts tat 'elon% to *711771 W2S item.

Creating Isometric (rawing from 6B$ items: +. Swit! to te (rawings and 8e!orts from 9as+s I (rawings and 8e!orts to !reate isometri! drawin%s for te !reated W 2S items.

+87

a'3: 1reatin% ew Style 0. n te 'anagement Conso&e> e$-and te drawin% ierar!y to nit 1 I Isometrics I Iso 6B$ Isometrics. SP3D dis-lays a messa%e 'o$. 1li!k OD to !ontin&e. 3. 9i%t!li!k te Iso 6B$ Isometrics !om-onent in te 'anagement Conso&e and sele!t te 8un ;uer% o-tion. SP3D &ses te &ery defined in te Iso 6B$ Isometrics !om-onent to find te W2S items wit Iso fabrication in te model and dis-lays te res< of te sear! in te drawin% ierar!y. *. ow ri%t!li!k te Iso 6B$ *ac+age o-tion in te ierar!y and !li!k te Create (rawingJs@ o-tion to !reate te isometri! drawin% do!&ments. 5. 9i%t!li!k te Iso 6B$ *ac+age isometri! drawin% ty-e and !li!k te !date #ow o-tion to &-date te drawin%s for 'ot te W2S %ro&-s. 6.

After te &-dation -ro!ess is !om-lete> do&'le!li!k te isometri! drawin%s !reated for te W2S items one 'y one. A -i!torial re-resentation of 'ot isometri!s will 'e dis-layed.

!dating Isometric (rawings: Pla!e a 45 deg e&bow and ro&te a 5 ft -i-e from te free end of te -i-eline 117*. After &-datin% te -i-eline> &-date te W2S item and ten &-date te isometri! drawin% of te -i-eline 117*. After &-datin% te drawin%> te view of te drawin%s will resem'le i%&res 7 and 8.

Figure 7: Output: Isometric Drawing from WBS P-1001-A-1

+88


Figure 8: Output: Isometric Drawing from WBS P-1001-B-1

Ste-s: +. Swit! to te *i!ing task from te 9oo&s I *i!ing !ommand to 'e a'le to work in te - i-in% environment. 0. nsert a 45 deg e&bow and ro&te a 5 ft -i-e from te free end of te -i-eline 117* in Unit 1 of yo&r works-a!e 'y &sin% te Insert Com!onent and 8oute *i!e !ommand. After insertin% te el'ow and ro&tin% te -i-e te view of te model so&ld resem'le i%&re ".

Figure %: Place$ &l'ow an$ #oute$ Pipe 3. )ake s&re te Locate i&ter is set to *i!ing *arts. ow sele!t te *5 de% el'ow and -i-e yo& ave -la!ed> as sown in i%&re +/.

+8"


Figure 10: Selecte$ Pipe Parts *.

9i%t!li!k te sele!ted -i-e -arts and o-en te $e&ection *ro!erties dialo% 'o$ to assi%n te -i-e -arts to te isometri! seet n&m'er B for !reatin% an isometri! drawin%. Ty-e B in te Isometric $heet #umber field in te $e&ection *ro!erties dialo% 'o$ and !li!k OD.

5. Sele!t te -i-e> as sown in i%&re ++.

Figure 11: Selecte$ Pipe 6.

9i%t!li!k te sele!ted -i-e and o-en te -ro-erties dialo% 'o$ reassi%n it to isometri! seet n&m'er  for !reatin% an isometri! drawin%. Ty-e  in te Isometric $heet #umber 'o$ in te $e&ection *ro!erties dialo% 'o$> and !li!k OD.

7.

ow to assi%n tese -i-e -arts to te a--ro-riate W2S items> !li!k te )rou! *i!e *arts '&tton on te verti!al tool'ar.

8. Te utomated 6B$ Creation dialo% 'o$ a--ears. Set te followin% s-e!ifi!ations in tis dialo% 'o$ and !li!k OD:

+"/

a'3: 1reatin% ew Style • • • • • • • •

".

W2S A&tomated 1reation 9&le ame: W2S so a'ri!ation ame 9&le: a'el ame 9&le (&ery a'el: W2S so 4ro&-in% (&ery a'ri!ation Dis!rimination ilter: U/+ W2S temBs Parent: so a'ri!ation )a$im&m &m'er ,f ,'=e!ts: +// P&ll n Asso!iated tems: 1onne!tion and 9e-orta'le )aintain #$istin% W2S temsL: alse

SP3D -rom-ts yo& to view te lo% file on!e te -ro!ess is !om-lete. 1li!k #o to !lose te lo% dialo% 'o$ and !li!k Cance& on te utomated 6B$ Creation dialo% 'o$.

+/. Swit! to te (rawings and 8e!orts task to &-date te isometri! drawin%s for te !reated W 2S items. ++. n te 'anagement Conso&e> e$-and te drawin% ierar!y to nit 1 I Isometrics I Iso 6B$ Isometrics I *E7 I Iso abrication I Iso 6B$ *ac+age. +0. 9i%t!li!k te Iso 6B$ *ac+age isometri! drawin% ty-e and !li!k te !date #ow o-tion to &-date te isometri! drawin%s. +3. After te &-dation is !om-lete> do&'le!li!k te isometri! drawin%s !reated for te W2S items one 'y one.

Changing the $tatus of 6B$ Items: 1an%e te stat&s of te W2S item P""/+ to A--roved. Ten> yo& will -la!e a tem-erat&re indi!ator T5/* on te -i-eline */3P and assi%n all te -i-in% o'=e!ts of te -i-eline */3P to te W 2S item P ""/+. Tis will sow tat te tem-erat&re indi!ator> -la!ed after !an%in% te stat&s of te W2S item to A--roved> !annot 'e assi%ned to te W2S item. 2efore 'e%innin% te -ro!ed&re: • •

Swit! to te *i!ing task from te 9oo&s I *i!ing !ommand. Define yo&r works-a!e to dis-lay Unit 4G !oordinate system 4 C$G and *roHects in te 6B$ ierar!y. n yo&r trainin% -lant> sele!t 4 and 6B$ Items !om-o&nd filter from *&ant i&ters A 9raining i&ters in te $e&ect i&ter dialo% 'o$.

Ste-s: +. n te 6or+s!ace >x!&orer > sele!t te 6B$ ta'. 0. 9i%t!li!k te W2S item *E771 &nder P"" folder and sele!t te *ro!erties o-tion from te men& to !an%e te -ro-erties of te W2S item *E771. 3. Te 6B$ Item *ro!erties dialo% 'o$ a--ears. ,n te Configuration ta'> sele!t te !!roed o-tion in te $tatus dro-down list and !li!k OD. *. ow -la!e a tem-erat&re indi!ator 9I7154 on te -i-eline 437*. Pla!e a + +0 R so!kolet and a ni--le first.

+"+


Figure 1(: Place$ )emperature In$icator

5. n te 6or+s!ace >x!&orer window> sele!t te 6B$ ta'. 6. n te 6or+s!ace >x!&orer window> sele!t te $%stem ta'. #$-and 2 I 4 I *rocess and sele!t te -i-eline system 437*. Te -i-eline 437* will 'e i%li%ted in te %ra-i! view. 7. ow sele!t te *roHect I ssign to 6B$ !ommand. Te ssign to 6B$ dialo% 'o$ a--ears. 8. n te ssign to 6B$ dialo% 'o$ e$-and *E7 folder and sele!t *E771. Ten !li!k OD. A messa%e is dis-layed statin% tat te o'=e!t yo& are tryin% to assi%n is in nonworkin% stat&s. Tis messa%e indi!ates tat yo& !annot a ssi%n -i-in% -arts to a W2S item in nonworkin% stat&s. ". Sele!t te *i!ing *arts o-tion in te Locate i&ter dro-down list and sele!t te tem-erat&re indi!ator 9I7154 in te %ra-i! view. +/. 9i%t!li!k te tem-erat&re indi!ator 9I7154 and o-en te *i!e Instrument *ro!erties dialo% 'o$. ++. Te 6B$ Item re!ord is not sown on te 8e&ationshi!s ta' on te *i!e Instrument *ro!erties dialo% 'o$.

+"0

2011 Isometric Drawing Training .doc

Recommend Documents