SESSION PLAN Sector
: ELECTRONICS
Qualification Title
: COMPUTER SYSTEMS SERVICING NCII
Unit of Competency
: INSTALL AND CONFIGURE COMPUTER SYSTEMS
Module Title
: INSTALLING AND CONFIGURING COMPUTER SYSTEMS
Learning Outcomes: At the end of the session, trainees must be able to: LO 1.
Assemble computer hardware
LO 2. Prepare installer LO 3. Install operating system and drivers for peripherals/ devices LO 4.
Install application software
LO 5
Conduct testing and documentation
A.
INTRODUCTION. This session covers the outcomes required in installing and configuring desktop and workstation computers systems. It consists of competencies to assemble computer hardware, install operating system and drivers for peripherals/devices, and install application software as well as to conduct testing and documentation.
B.
LEARNING ACTIVITIES
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Document No. Issued by: Page 2
Developed by: MARFE C. INTENDENCIA Revision # 0
LO 1.
1
Assemble Computer Hardware
Learning Content 1.1. OH&S policies and procedures
1.2 Tools, equipment and testing devices
Methods Individualized learning
Presentation
Practice
Feedback
Trainee will read information sheet 1.1-1 on “OH&S policies and procedures”
Trainee will Answer self – check 1.1-1
Multimedia presentation with discussion
Trainee will view ppt slides on OH&S policies and procedures
Trainee will answer self check1.1-1
Compare trainee’s responses to answer key
*ppt file *Self-check *Pc/ laptop *Answer key
Individualized learning
Trainee will read information sheet 1.1-2 on Tools, equipment and testing devices Trainee will read and interpret Task sheet 1.1-2 “Identify Tools, equipment and testing devices.
Trainee will Answer self – check 1.1-2
Refer to answer key 1.1-2
CBLM* Information sheet *self-check *answer key
Trainee will perform task sheet 1.1-2
Trainee’s performance will be evaluated using performance criteria checklist 1.1-2
*Task sheet
Trainee will view video clips on Tools, equipment and testing devices
Trainee will answer self chec1.1-2
Compare trainee’s responses to answer key
* video clips *Self-check *Pc/ laptop *Answer key
Multimedia presentation with discussion
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Refer to answer key 1.1-1
Resources *CBLM *Information sheet *self-check *answer key
30 mins.
*Performance criteria *tools & equipment devices
15 mins
15 mins
Page 3 Revision # 0
1 hr.
1 hr.
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
Time
demonstration
1.3. Procedures in Assembling Computer Hardware
Individualized learning
Trainee will observe the advanced trainee’s demonstration on Tools, equipment and testing devices
Trainee will perform return demo on Tools, equipment and testing devices
Evaluate output using performance criteria checklist 1.1-2
*checklist *client
Trainee will read information sheet 1.1-3 on Procedures in Assembling Computer Hardware Trainee will read and interpret Job sheet 1.1-3 “ Assemble computer”
Trainee will Answer self – checked 1.1-3
Refer to answer key 1.1-3
CBLM* Information sheet *self-check *answer key
Trainee will perform Job 1.13
*CBLM
Multimedia presentation with discussion
Trainee will view video clip on assembling computer
Trainee will answer self checked1.1-3
Trainee’s performance will be evaluated using performance criteria checklist 1.1-3 Compare trainee’s responses to answer key
demonstration
Trainee will observe the advanced trainee’s demonstration on assembling computer
Trainee will perform return demo on assembling computer
Evaluate output using performance criteria checklist 1.1-3
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
1 hr
*Task sheet *Performance criteria
* video clip *Self-check *Pc/ laptop *Answer key *checklist *client *computer
30 min
1.5 hrs
Page 4 Revision # 0
30 min
* computer
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
30 min
1.4 Basic-inputoutput-system (BIOS) configuration
Individualized learning
Trainee will read information sheet 1.1-4 on Basic-input-output-system (BIOS) configuration
Trainee will Answer self – checked 1.1-4
Refer to answer key 1.1-4
* CBLM *Information sheet *self-check *answer key
Trainee will read and interpret task sheet 1.1-4 “Configure Basic-inputoutput-system (BIOS)
Trainee will perform task sheet 1.1-4
*Task sheet
Multimedia presentation with discussion
Trainee will view video clip on Basic-input-outputsystem (BIOS) configuration
Trainee will answer self chec1.1-4
Trainee’s performance will be evaluated using performance criteria checklist 1.1-4 Compare trainee’s responses to answer key
demonstration
Trainee will observe the advanced trainee’s demonstration on Configure Basic-inputoutput-system (BIOS
Trainee will perform return demo on Configure Basicinput-outputsystem (BIOS)
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Evaluate output using performance criteria checklist 1.1-4
*Performance criteria
* video clip *Self-check *Pc/ laptop *Answer key *checklist *client
30 min
1.5 hrs
Page 5 Revision # 0
30 min
*computer
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
30 min.
LO. 2
Prepare installer
2.1 Creating portable bootable devices
Individualized learning
Trainee will read information sheet 1.2-1 on Creating portable bootable devices
Trainee will Answer self – checked 1.2-1
Refer to answer key 1.2-1
Trainee will read and interpret task sheet 1.2-1 Creating portable bootable devices
Trainee will perform the activity task sheet 1.2-1
Trainee’s performance will be evaluated using performance criteria checklist 1.2-1 Compare trainee’s responses to answer key
Multimedia presentation with discussion
Trainee will view video clip slides on Creating portable bootable devices
Trainee will answer selfcheck 1.2-1
demonstration
Trainee will observe the advanced trainee’s demonstration on Creating portable bootable devices
Trainee will perform return demo on Creating portable bootable devices
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Evaluate output using performance criteria checklist 1.2-1
* CBLM *Information sheet *self-check *answer key *Task sheet *Performance criteria
*video clip *Self-check *Pc/ laptop *Answer key *checklist *client *portable devices
Page 6 Revision # 0
30 min
*portable devices
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
30 min
30 min
1.5 hrs
2.2 Preparing Customized installers
2.3 Installing of portable applications
Individualized learning
Trainee will read information sheet 1.2-2 on Preparing Customized installers
Trainee will Answer self – checked 1.2-2
Refer to answer key 1.2-2
Trainee will read and interpret task sheet 1.2-2 Preparing Customized installers
Trainee will perform the activity task sheet 1.2-2
Trainee’s performance will be evaluated using performance criteria checklist 1.2-2
* CBLM *Information sheet *self-check *answer key *Task sheet *Performance criteria
Trainee will view ppt slides on Preparing Customized installers
Trainee will answer self chec1.2-2
Compare trainee’s responses to answer key
*ppt file *Self-check *Pc/ laptop *Answer key
Individualized learning
Trainee will read information sheet 1.2-3 on Installing of portable applications
Trainee will Answer self – checked 1.2-3
Refer to answer key 1.2-3
Trainee will read and interpret job sheet 1.2-3 Installing of portable applications
Trainee will perform the activity task sheet 1.2-3
Trainee’s performance will be evaluated using performance criteria checklist 1.2-3
* CBLM *Information sheet *self-check *answer key *Job sheet
February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
*Performance criteria * installer devices
Document No. Issued by: Page 7
Developed by: MARFE C. INTENDENCIA Revision # 0
30 min
installer devices
Multimedia presentation with discussion
Date Developed:
30 min
1 hr
30 min
30 min
Multimedia presentation with discussion
Trainee will view video clips on Installing of portable applications
Trainee will answer self checked1.2-3
Compare trainee’s responses to answer key
* video clips *Self-check *Pc/ laptop *Answer key
Demonstration
Trainee will observe the advanced trainee’s demonstration on Installing of portable applications
Trainee will perform return demo on Installing of portable applications
Evaluate output using performance criteria checklist 1.2-3
*checklist *client installer devices
30 min
2.5 hrs
LO. . 3. Install operating system and drivers for peripherals/ devices 3.1 Installing Operating system (OS)
Individualized Learning
Multimedia presentation with discussion
Trainee will read information sheet 1.3-1 on Installing Operating system (OS)
Trainee will Answer self – checked 1.3-1
Refer to answer key 1.3-1
Trainee will read and interpret job sheet 1.31 Installing Operating system (OS)
Trainee will perform the activity task sheet 1.3-1
Trainee’s performance will be evaluated using performance criteria checklist 1.3-1 Compare trainee’s responses to answer key
Trainee will view ppt slides on Installing Operating system (OS)
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Trainee will answer self checked 1.3-1
* CBLM *Information sheet *self-check *answer key *job sheet *Performance criteria
*video clip *Self-check *Pc/ laptop *Answer key
Page 8 Revision # 0
30 min
*installation procedures
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
30 min
30 min
Demonstration
3.2 Installing and configuring Peripherals/devices drivers
Individualized Learning
Multimedia presentation with discussion
Trainee will observe the advanced trainee’s demonstration on Installing Operating system (OS)
Trainee will perform return demo on Installing Operating system (OS)
Evaluate output using performance criteria checklist 1.3-1
*checklist *client *installation procedures
Trainee will read information sheet 1.3-2 on Installing and configuring Peripherals/devices drivers Trainee will read and interpret task sheet 1.32
Trainee will Answer self – checked 1.3-2
Refer to answer key 1.3-2
* CBLM *Information sheet *self-check *answer key
Trainee will perform the activity task sheet 1.3-2
*Task sheet
Trainee will view video clip on Installing and configuring Peripherals/devices drivers
Trainee will answer self-check 1.3-2
Trainee’s performance will be evaluated using performance criteria checklist 1.3-2 Compare trainee’s responses to answer key
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
*Performance criteria
*video clip *Self-check *Pc/ laptop *Answer key
Document No. Issued by: Page 9
Developed by: MARFE C. INTENDENCIA Revision # 0
1.5 hrs
30 min
30 min
30 min
Demonstration
3.3 Accessing and installing OS and drivers
Individualized Learning
Trainee will observe the advanced trainee’s demonstration on Installing and configuring Peripherals/devices drivers Trainee will read information sheet 1.3-3 on Accessing and installing OS and drivers
Trainee will perform return demo on Installing and configuring Peripherals/device s drivers
Evaluate output using performance criteria checklist 1.3-2
*checklist *client *installer procedures
Trainee will Answer self – checked 1.3-3
Refer to answer key 1.3-3
Trainee will read and interpret task sheet 1.33 Accessing and installing OS and drivers
Trainee will perform the activity task sheet 1.3-3
Trainee’s performance will be evaluated using performance criteria checklist 1.3-3 Compare trainee’s responses to answer key
* CBLM *Information sheet *self-check *answer key *Task sheet
Multimedia presentation with discussion
Trainee will view video clip on Accessing and installing OS and drivers
Trainee will answer self checked1.3-3
Demonstration
Trainee will observe the advanced trainee’s demonstration on Accessing and installing OS and drivers
Trainee will perform return demo on Accessing and installing OS and drivers
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Evaluate output using performance criteria checklist 1.3-3
*pictures
*video clip *Self-check *Pc/ laptop *Answer key
30 min
*checklist *client *installation procedures
1.5 hrs
Page 10 Revision # 0
30 min
*Performance criteria
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
1.5 hrs
3.4 Checking of the quality of the work
Individualized Learning
Trainee will read information sheet 1.3-4 on checking the quality of the work
Trainee will Answer self – checked 1.3-4
Refer to answer key 1.3-4
* CBLM *Information sheet *self-check *answer key
1 hr
LO. 4. Install Application Software 4.1 Installing Application software
Individualized Learning
Multimedia presentation with discussion
Trainee will read information sheet 1.41on 1nstalling Application software
Trainee will Answer self –checked 1.4-1
Refer to answer key 1.41
Trainee will read and interpret task sheet 1.41 1nstalling Application software
Trainee will perform the activity task sheet 1.4-1
Trainee’s performance will be evaluated using performance criteria checklist 1.4-1 Compare trainee’s responses to answer key
Trainee will view video clip on 1nstalling Application software
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Trainee will answer self checked1.4-1
* CBLM *Information sheet *self-check *answer key *Task sheet *Performance criteria
* video clip *Self-check *Pc/ laptop *Answer key
Page 11 Revision # 0
30 min
* video clip
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
30 min
30 min
Demonstration
4.2 Installing Variation to application software
Individualized Learning
Multimedia presentation with discussion
Demonstration
Trainee will observe the advanced trainee’s demonstration on 1nstalling Application software Trainee will read information sheet 1.4-2 on Installing Variation to application software
Trainee will perform return demo on 1nstalling Application software
Trainee will read and interpret task sheet 1.42 Installing Variation to application software
Trainee will perform the activity task sheet 1.4-2
Trainee will view video clip on Installing Variation to application software
Trainee will answer self chec1.4-2
Trainee will observe the advanced trainee’s demonstration on Installing Variation to application software
Trainee will perform return demo on Installing Variation to application software
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Trainee will Answer self –checked 1.4-2
Date Revised:
Evaluate output using performance criteria checklist 1.4-1 Refer to answer key 1.42
Trainee’s performance will be evaluated using performance criteria checklist 1.4-2 Compare trainee’s responses to answer key
Evaluate output using performance criteria checklist 1.4-2
*checklist *client * installer procedures *CBLM *Information sheet *self-check *answer key *Task sheet *Performance criteria
30 min
* video clip *Self-check *Pc/ laptop *Answer key
30 min
*checklist *client installer procedures
1.5 hrs
Page 12 Revision # 0
30 min
* installer procedures
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
2.5 hr
4.3 Installing Software updates
Individualized Learning
Multimedia presentation with discussion
Demonstration
Trainee will read information sheet 1.4-3 on Installing Software updates
Trainee will Answer self –checked 1.4-3
Refer to answer key 1.43
Trainee will read and interpret task sheet 1.43 Installing Software updates
Trainee will perform the activity task sheet 1.4-3
Trainee’s performance will be evaluated using performance criteria checklist 1.4-3 Compare trainee’s responses to answer key
Trainee will view video clips on Installing Software updates Trainee will observe the advanced trainee’s demonstration on Installing Software updates
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Trainee will answer self check1.4-3
Trainee will perform return demo on Installing Software updates
Evaluate output using performance criteria checklist 1.4-3
* CBLM *Information sheet *self-check *answer key *Task sheet *Performance criteria
*video clip *Self-check *PC/ laptop *Answer key
30 min
*checklist *client installer procedures
1.5 hrs
Page 13 Revision # 0
30 min
* installer procedures
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
30 min
LO.5
Conduct Testing and Documentation
5.1 Testing Devices / systems and/or installation
5.2 test
5.3
Conducting Stress
5S and 3Rs
Individualized Learning
Individualized Learning
Individualized Learning
Trainee will read information sheet 1.5-1 on Testing Devices / systems and/or installation Trainee will read and interpret task sheet 1.5-1 Testing Devices / systems and/or installation
Trainee will read information sheet 1 .5-2 on
Trainee will read information sheet 1.53on
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Trainee will Answer self – checked 1.5-1
Refer to answer key 1.51
Trainee will perform the activity task sheet 1.5-1
Trainee’s performance will be evaluated using performance criteria checklist 1.5-1 Refer to answer key 1.52
Trainee will Answer self – checked 1.5-2
Trainee will Answer self – checked 1.5-3
Refer to answer key 1.53
* CBLM *Information sheet *self-check *answer key *Task sheet *Performance criteria
* CBLM *Information sheet *self-check *answer key *Information sheet *self-check *answer key
Page 14 Revision # 0
1.5 hr
*
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
1 hr
2.5 hr
2.5 hr
5.4 Documentation in relation to the test
Individualized Learning
Demonstration
Trainee will read information sheet 1.5-4 on
Trainee will Answer self – checked 1.5-4
Refer to answer key 1.54
Trainee will read and interpret task sheet 1.5 4
Trainee will perform the activity task sheet 1.5-4
Trainee’s performance will be evaluated using performance criteria checklist 1.5-4 Evaluate output using performance criteria checklist 1.5-4
Trainee will observe the advanced trainee’s demonstration on
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Trainee will perform return demo on
* CBLM *Information sheet *self-check *answer key *Task sheet *Performance criteria
*checklist *client
Page 15 Revision # 0
30 min
*pictures
Document No. Issued by:
Developed by: MARFE C. INTENDENCIA
30 min
1.5 hr
C.
ASSESSMENT PLAN
Assemble computer hardware, Prepare installer, Install operating system a nd drivers for peripherals/ devices, Install application software Written Test on: Conduct testing and document
Oral Questioning on : Assemble computer hardware, Prepare installer, Install o perating system and drivers for peripherals/ devices, Install application software Performance Test on: Assemble computer hardware
NOTE: Written test and oral Interview will be conducted inside the TVE building. Performance Test will be conducted inside the Computer Laboratory
D. TEACHER’S SELF -REFLECTION OF THE SESSION
Trainees/students who can perform the standard requirement of the qualification shall be competent (C) while trainees/students who cannot perform within the standard requirement of the qualification shall be not competent (NC) in his/her rating. Trainees/students who can be proved competent have greater opportunity here and abroad.
Date Developed: February 5, 2018
COMPUTER SYSTEMS SERVICING NC II
Date Revised:
Document No. Issued by: Page 16
Developed by: MARFE C. INTENDENCIA Revision # 0
