iPASOLINK 100E iPASOLINK is a modular network element that integrates a comprehensive set of TDM cross connect switching, packet switching and microwave / optical features, resulting in reduced costs and a long investments lifetime. The following iPASOLINK series cover cover mobile backhaul requirements requirements all the way from the access tail links through to the metro aggregation network.
Ultra
Compact
All
IP Pay as you grow architecture Natural Cooling
iPASOLINK 100
iPASOLINK 200 up
to 2-way radio Redundancy Compact design
No
Radio Redundancy Compact design iPASOLINK 1000 12 12-way -way 4-way
Nodal
Redundancy Four
universal Slots Pay as you grow architecture
iPASOLINK 400
Nodal
Redundancy 14
Universal Slots High Speed INTF SDH and All IP with CWDM
up
to 4-way radio Universal Slots Redundancy Low cost Compact design Two
iPASOLINK 400A
iPASOLINK 100E iPA S OLI NK 100E 100E is a packet packet bas bas ed microwave microwave radio radio s ys tem for hig h s peed data data trans port por t i n an an ultra ultra compact compact half half the 19 19 inch inc h ra r ack s ize unit uni t with nat natural cooling cooling conta containing s ing le built in i n modem. modem. Transmission Specification
Fr eq eque uency ncy bands bands:: 6 to to 42 GHz G Hz R adio Trans Trans mis s ion C apabil pabilitie itiess : Advanced Ethernet Functionalities
VLAN
P ort-b ort-ba as ed VL A N 802.1Q 802.1Q Ta Tag -ba -bas ed VL A N Q in Q ( Tunnel) Tunnel) QoS 802.1 802.1p p CoS / To ToS S /Diffs erv,MP rv,MP LS E XP A dvanced dvanc ed QoS (for (f or A MR ) S ynch yn chrr onous onou s E thernet thern et E thernet hernet OA M IE E 802.1 802.1a ag , ITUIT U-T T Y 1731 1731 Link OA M IEE E 802. 802.3a 3ah h R S TP (802. (802.1w 1w), ), MS MS TP Link A g g reg reg ation ion (LA (LA C P) E ther her R ing Pr ote otection ction ITU-TG .8031 .8031,, 8032 8032V2 V2 Heade Headerr C ompress ompress ion
QP S K /16/32/ 16/32/64/ 64/128/ 128/256 256 QA QA M Hitless-AMR LDPC FEC Transmis Trans mis s ion bandwidth bandwidth 7, 14, 28 & 56 MHz MTP C / AT ATP PC
Inte In terf rface ace :10/ : 10/100/ 100/1000 1000 B aseas e-T T 1000 1000 B as e-S X / LX
Scalability and Scalability and Flexibility
P ay as you y ou g row concept - s oftwa oftware re upg rade up to 460 460 Mbps Mbps - In-B In-B and DC N
iPASOLINK 100/200 Transmission Specification
Advanced Ethernet Functionalities
VLAN
P ort-ba ort-bass ed VL A N 802.1Q 802.1Q Tag Tag -bas -bas ed VLA N Q in Q ( Tunnel) Tunnel) QoS 802.1p 802.1p C oS / ToS /Di /Diffs ffs erv,MP erv,MP LS E XP A dvanced dvanc ed QoS (for (f or AMR A MR ) - S ynchronous ynchronous E therne thernett - E thernet hernet OA M IE E 802.1a 802.1agg , ITU-T Y1731 - Link OAM IE E E 802.3 802.3a ah - R S TP (802.1w (802.1w), ), MS MS TP - Link Ag g reg reg ation (LA CP ) - E ther her R ing P rotect rotection ion ITU-TG .8031, .8031, 8032V2 8032V2 - Header Header Compress Compres s ion (L2/L3) (L2/L3)
Freq Fr equen uency cy bands bands:: 6 to 42 42 G Hz R adio Trans Trans mis s ion C apacitie pacitiess : QP S K /16/32/ 16/32/64/ 64/128/ 128/256 256 QA QA M Hitless-AMR LDPC FEC Trans Trans miss mis s ion B andwidth ndwidth 7,14,28 7,14,28 & 56 MHz MTP C / AT ATP PC . A ny combina combination tion of S DH / P DH / LA N traffic raffic Interface : 10/100/ 10/100/1000 1000 B ase-T as e-T 1000 1000 B as e-S e-S X / LX 16 x E 1, 1xS TM-1(thru)or TM-1(thru)or 1x C hannel hannelized ized Scalability and Scalability and Flexibility
P ay as you g row concept concept - s oftwa oftware re upg rade Flexible Flexi ble config uration uration - 1+0, 1+0, 1+1 1+1 HS /S D/FD D/FD,, XP IC (1+0) (1+0) - R adio A g g regation regation (L2, L3) - 168 168xE xE 1 Cr oss Connect Connect S W - PWE (S AT AToP) oP) - E nhanced nhanced In-B In-B and DCN DC N - TDM TDM Ri ng P rotect rotection ion (S NC P) - DH C P R ela elay/S y/S ever ever F unction unction - In-Band In-Band DC N
iPASOLINK 400 A Transmission Specification
Advanced Ethernet Functionalities
VLAN
Port-ba Port-bas ed VL A N 802.1Q 802.1Q Tag Tag -bas -bas ed VL A N 802.1 802.1a ad Pr ovider ovider B ridg es QoS 802.1p 802.1p CoS / ToS /Diffs Di ffs erv - MPLS E XP A dvanced dvanc ed QoS (for (f or AMR A MR ) - S ynchronous ynchronous E thernet hernet - RS TP (802.1w (802.1w), ), MS MS TP - E R P I TU-T TU-T G .8031 .8031,, 8032V2 8032V2 - E thernet hernet OA M, IE E 802.1a 802.1agg , ITU-T Y1731 - Link OAM IE E E 802.3 802.3a ah - Link Ag g regation regation 802.3 802.3a ad with with LA CP - Header Header Compress Compres s ion (L2/L3) (L2/L3) * Future
Freq Fr equen uency cy bands: bands: 6 to 42 42 G Hz R adio Trans Trans mis s ion C apacitie pacitiess : QP S K /16/32/ 16/32/64/ 64/128/ 128/256/ 256/512/ 512/1024 1024//2048 QA M Hitless-AMR LDPC FEC Trans mis s ion B andwidth 7/14/ 7/14/28/ 28/40/ 40/56MHz 56MHz MTP C / AT ATP PC . A ny combina combination tion of S DH / P DH / LA N traffic traffic Interface : 10/100/ 10/100/1000 1000 B ase-T 1000 1000 B as e-S e-S X / LX 16 x E 1, 2xS 2x S TM-1(thru) TM-1( thru)or or 1x C hannelized Scalability and Scalability and Flexibility
P ay as you g row concept concept - s oftwa oftware re upg rade Flexible Flexi ble config uration uration - Two on board modems modems - Two Univers Univers al s lot lots - 1+0, 1+0, 1+1 1+1 HS /S D/FD D/FD,XP ,XP IC (1+0),A (1+0),AP PS - R adio A g g regation regation (L2, L3, L1) - 168 168xE xE 1 Cr oss Connect Connect S W - PWE (S AT AToP) oP) - TDM R ing prot protection ection (S NC P) - In-Band In-Band DC N
iPASOLINK 400 Transmission Specification
Advanced Ethernet Functionalities
VLAN
Port-bas ed VL A N 802.1Q Tag -bas ed VL A N 802.1ad Provider B ridg es QoS 802.1p CoS / ToS /Di ffs erv/ - MPLS E XP A dvanced QoS (for AMR ) S ync hronous E thernet IE E E 1588v2 (B C & s lave) (Option Card) R S TP (802.1w), MSTP E R P ITU-T G .8031, 8032V2 E thernet OA M, IE E 802.1ag , ITU-T Y1731 Link OA M IE E E 802.3ah Link Ag g regation 802.3ad with LA CP Header Compres s ion (L2/L3)
Frequency bands: 6 to 42 G Hz R adio Transmis s ion C apacities : QP S K /16/32/64/128/256/512/1024/2048 QA M Hitless-AMR LDPC FEC Trans mis s ion B andwidth 7/14/28/40/56MHz MTP C / ATPC . Any combination of SDH / PDH / LA N traffic Interface : 10/100/1000 B ase-T 1000 B as e-S X / LX 16 x E 1, 2xS TM-1(thru)or 1x C hannelized Scalability and Flexibility
Pay as you g row concept - s oftware upg rade Flexible config uration - 1+0, 1+1 HS /S D/FD,XP IC (1+0)/(1+1),APS - R adio A g g regation (L2, L3, L1) - 168xE 1 Cr oss Connect S W - PWE (S AToP) - E nhanced In-B and DCN - DHCP S erver/R elay Function - TDM Ri ng P rotection (S NC P) - In-Band DC N
iPASOLINK 1000 Transmission Specification
Advanced Ethernet Functionalities
VLAN
Port-bas ed VL A N 802.1Q Tag -bas ed VLA N 802.1ad Provider B ridg es QoS 802.1p CoS / ToS /Diffs erv/ - MPLS EXP A dvanced QoS (for AMR ) - RS TP (802.1w), MS TP - E R P I TU-T G .8031, 8032V2 - E thernet OA M, IE E 802.1ag , ITU-T Y1731 - Link OAM IE E E 802.3ah - Link Ag g regation 802.3ad with LA C P - Header C ompress ion (L2, L3)
Frequency bands: 6 to 42 G Hz R adio Transmis s ion C apacities : QP S K /16/32/64/128/256/512 /1024/2048QA M Hitless-AMR LDPC FEC transmis s ion Bandwidth 7/14/28/40/56MHz MTP C / ATPC . A ny combination of S DH / PDH / LA N traffic Interface : 10/100/1000 B as e-T 1000 B as e-S X / LX 10GbE (Hig h S peed Interface)* 16 x E 1, 2xS TM-1(thru)or 1x C hannelized Scalability and Flexibility
Pay as you g row concept - s oftware upg rade Flexible config uration - 1+0, 1+1 HS /S D/FD ,XP IC (1+0)/(1+1), APS - R adio A g g regation (L1,L2,L3) - 1512xE 1 (10 S TM-1) Cros s C onnect SW - TDM R ing Pr otection (S NC P) - DHC P S erver / R elay Function - PWE (S AToP ) - CWDM - In-B and DC N
natural cooling 100E
100/200
1000
400
In case the FAN alarm occurs, replace the FAN unit immediately. The FAN unit can be replaced under poweron condition (hot-swappable).
Native TDM TDM based network is the bandwidth-guaranteed and synchronous network. It is free from time and synchronization issues. However, TDM network can not manage the growth of data traffic efficiently.
Native IP Unlike Native TDM network, IP based network can accommodate the growth of data traffic efficiently. In addition, wiring work can be reduced dramatically as a result of shared connections. However, IP-based network, due to its asynchronous and on-demand nature, does not guarantee synchronous delivery of data. Therefore, synchronization issue due to fluctuation of delay, latency or jitter must be carefully considered in transmission of mobile service.
Dual Native (Native TDM and Native IP) Both packet switching and TDM cross connect are supported natively, which enables flexible transport per traffic type on a single platform. Without incurring additional latency, delay/jitter sensitive traffic and clock such as 3GPP Release-99 traffic is transmitted on TDM network directly, and IP based traffic such as LTE traffic is transmitted on IP network directly without conversion. Moderate packet data growth may be efficiently aggregated by statistical multiplexing while keeping the quality of delay/jitter sensitive TDM services..
TDM splitting (with PWE ) TDM splitting enables a port of legacy network traffic, such as HSPA data, to be dispensed onto IP network with Pseudo-Wire Emulation (PWE), keeping only critical and timing-sensitive data on TDM network. With this functionality, it is possible to streamline legacy network while increasing IP network usage. PWE should be applied for transmission of jitter and latency relaxed services or where clock synchronization within mobile RAN has been established by adoption of other synchronization measures.
Traffic Offload/C oncentration Traffic offload allows the operator to unload their IP traffic, including emulated legacy traffic, onto other cost effective IP network. The benefit of traffic offloading is twofold: > Differentiation of services to customers > Reduction of OPEX by converging voice and data traffic In contrast to offload, concentration creates an opportunity for wholesale operators and carriers to maximize the utilization of their networks by converging services and traffic from various customers .
iPASOLINK support both native TDM and native Ethernet. It is possible to provide TDM and Ethernet Hybrid transmission or ALL IP transmission without external box within the same equipment. iPASOLINK can provide flexible and optimized migration scenario according to networ k situations and customer evolution
Access
Aggregation
Metro
Core
2G/3G/LTE E1
BTS/Node-B
Ethernet
iPASOLINK 200
iPASOLINK 200
iPASOLINK 1000
eNB
iPASOLINK 1000
WiMAX
iPASOLINK 400
AGW
iPASOLINK 400/1000 iPASOLINK 1000
Ethernet iPASOLINK 200
BSC/ RNC/ MME
iPASOLINK 1000
Internet
iPASOLINK 200
BS
MS5000
: All IP
: Dual Native (Hybrid)
: Hybrid Split
Packet network
: Off Load
: CWDM
iPASOLINK can provide end to end Ethernet connectivity with the extension of reach and capacity, nodal packet radio, aggregation and bandwidth management. It is possible to use it also for WIMAX network and fixed network.
iPASOLINK 100E Application in IP network All 100E links
Enterprise NW
100E link
Core Network Back to Back 100E -400 link
100E-200 link
iPASOLINK Series Network
iPASOLINK capability for Evolution of Mobile Backhaul
TDM based Backhaul
2/3G Backhaul TDM Based BSC/ RNC
Network
BS Option-1 TDM + IP based Backhaul
Option-2 ALL IP based Backhaul 2/3G/LTE Backhaul
2/3G/LTE Backhaul TDM Based Network
BSC/ RNC
PWE
BS
BS
PWE
IP Based
BSC/ RNC
TDM
Core
Network IP Based eNB
Network
MME S-GW
eNB
Only iPASOLINK can make these transitions on the same platform
MME S-GW
Risk free migration to All IP-1 The migration from TDM based network to All IP network is achieved by simply adding the MSE (Multi Service Engine) card.
Hybrid Radio
16xE1 16xE1
Migration (PWE)
Packet Radio
MSE
16xE1 Note: Network needs to be synchronized by sync ETH , etc.
MSE: Multi Service Engine
Risk free migration to All IP-2 The migration from TDM based network to All IP network is achieved by simply adding the MSE (Multi Service Engine) card. TDM transmission
Hybrid Radio
16xE1 16xE1
16xE1
Packet transmission
16xE1
Packet Radio
Migration
64xE1 (PWE)
16xE1 MSE
64xE 16xE1 1
Note: Network needs to be synchronized by sync ETH , etc.
MSE
MSE: Multi Service Engine
Using the STM-1, E1 and Ether BB options
1) E1 with Ethernet Transmission Aggregation
Access
16xE1
16xE1 16xE1
16E1/MDR x 2 or Channelized STM-1 FE or GbE
32xE1
Ethernet 2) STM-1 with Ethernet transmission
STM-1
STM-1 FE or GbE
FE or GbE STM-1 transparent Ethernet
iPASOLINK XPIC (Cross Polarization Interference Canceller) iPASOLINK can double its transmission capacity up to 880Mbps in 56MHz bandwidth by adopting NEC’s state of the art XPIC technology. The additional required components for XPIC are; Dual polarized antenna, Additional ODU, Associated IF cable kit, (iPASO 400 / 1000) Soft-key upgrade in IDU. iPASOLINK400/1000 can be configured with Multiple groups of XPIC links in one IDU.
iPAS O 200 iPAS O 400
iPA S O 1000 (In case of iPASOLINK200, no cable connection is required at the front panel for XPIC )
FEATURES-1 INTERFACES – 100E
2 x 10/100/1000 Base-T(X), 2 x 1000 Base –SX/LX SFP (No TDM Interfaces)
•
•
INTERFACES - 100/200
4 x 10/100/1000 Base-T(X), 2 x 1000 Base –SX/LX SFP 16 x E1 main board and 16xE1 option card or 1xSTM-1 optical /electrical MSE (Multi Service Engine) 16X E1 PWE option card SAToP (RFC4553)
•
• •
INTERFACES - 400
2 x 10/100/1000 Base-T(X), 2 x 1000 Base –SX/LX SFP (Main Board)
•
16 x E1 main board and 16E1 card (Universal slot)
•
2xSTM-1 optical /electrical (Universal slot)
•
2 x 10/100/1000 Base-T(X), 2 x 1000 Base –SX/LX SFP (Universal slot)
•
MSE (Multi Service Engine) 64X E1 PWE card (Universal slot)
•
SAToP (RFC4553) Four front mounted universal slots are available for Modems and option interface cards •
FEATURES-2 INTERFACES -1000
2 x 10/100/1000 Base-T(X), 2 x 1000 Base –SX/LX SFP (Main Board)
•
16 x E1 card (Universal slot)
•
2xSTM-1 optical /electrical (Universal slot)
•
2 x 10/100/1000 Base-T(X), 2 x 1000 Base –SX/LX SFP (Universal slot) (2 Cards)
•
10 GbE (Universal slot)*
•
CWDM High speed interface
•
MSE (Multi Service Engine) 64X E1 PWE card (Universal slot) (2 Cards)
•
SAToP (RFC4553) Auxiliary Card ( HK, EOW B-B, NE2 etc.) Redundant Main card (TDM/L2 Switch matrix with CPU)
•
•
Fourteen front mounted universal slots are available for Modems and option interface cards •
FEATURES-3 ADVANCED QoS FUNCTION – 100E/100/200/400/1000
Enhanced QoS functions Packet classification functions based on header information (802.1p, IPv4 Precedence, IPv4/IPv6 DSCP. MPLS EXP
•
Bandwidth Management (Traffic shaping, CIR/PIR policing per port/VLAN) Class mapping (4 or 8 Class queues for QoS control) Congestion avoidance mechanism (WTD or WRED) Flexible Scheduling (Deficit-weighted round robin or strict Priority) ETHERNET / VLAN – 100E/100/200/400/1000
VLAN functions on layer 2 based carrier network
•
VLAN table size 256 group or option-4094 group (VLAN 1 ~4094) Port based VLAN, tag based (IEEE 802.1Q), Provider bridge (IEEE802.1ad)
•
•
iPasolink 100E/100/200 Q-in-Q Tunnel mode only
Support Jumbo frame (FE < 2000 , GbE < 9600) Redundancy Function:RSTP(IEEE802.1W)/MSTP for redundancy loop prevention
•
•
Ethernet Ring (G.8032)
•
Link aggregation (IEEE802.3 ad) with LACP
•
FEATURES-4 SWITCHING FUNCTION-100E
Packet Switching: up to 10 Gbps (no TDM Switching)
•
HYBRID SWITCHING FUNCTION-100/200
TDM Cross connect: max 168 x 168 E1 left and right hand routes Support SNCP Packet Switching: up to 20 Gbps
•
•
•
HYBRID SWITCHING FUNCTION-400
TDM Cross connect: max 168 x 168 E1 left and right hand routes 2 x STM-1 XC support Support SNCP Packet Switching: up to 40 Gbps
• •
•
•
HYBRID SWITCHING FUNCTION-1000
1512 x 1512 E1 with support for 10 STM-1 Support SNCP
•
•
Packet Switching: up to 48 Gbps
•
Redundant Main card (TDM/L2 Switch matrix with CPU) Note : The number of E1 channels depend on modulation scheme and TDM capacity
FEATURES-5 COMPACT AND RELIABLE PLATFORM
Very compact and light platform for easy installation 1u IDU (100/200/400) 3U (1000)with GUI LCT for easy setting up 3/3.5 kg ODU Backward compatible with Pasolink NEO series ODU High reliability and quality backed by excellent field proven MTBF Low Power consumption: adoption of high efficient RF components
•
VERSATILE RADIO SECTION
High modulation up to 256 QAM (100E) for Native Ether High modulation up to 2048 QAM (400/400A/1000)for Native Ether and TDM High system gain using LDPC FEC and Linearizer techniques Adaptive modulation Radio (AMR) cross polarization interference canceller. (XPIC) [not for 100 & 100E] Double transmission capacity up to 920 mbps in 56 MHz BW Enhanced system gain with new ODU (IHG)
• •
•
• •
•
•
FREQUENCY AGILITY AND EASY TUNING
Field tunable local oscillators (Synthesizer) RF Point Frequency can be changed through Local Craft Terminal (LCT) ODU Sub-band changeable by simply replacing the RF Filter.
•
•
•
FEATURES-6 SYNCHRONIZATION
High Accuracy clock supply for clock synchronization Support both native TDM and synchronous Ethernet for clock reference
•
•
400
IEEE 1588v2 with optional module (PTP-A) (BC and Slave)
•
Support external clock input / output [not for 100E]
•
PROTECTION SCHEMES
E1 Ring Protection [not for 100E]
•
400/1000
Automatic Protection switching (APS) for STM-1
•
RSTP / MSTP and Ether Ring protection
•
400/1000
Timing source protection Priority or Quality
•
Hot Standby and Twin path for radio protection
•
FEATURES-7 SUPERB OAM FUNCTIONALITIES
Loopback capability Near end, far end and IF loop-backs 400/1000 Modem Loopback: IF loop-backs and L2 Loop Back •
•
Ethernet OAM (IEE802.1ag / ITU-T Y.1731) and Link OAM IEEE 802.3ah
•
200
Fault detection, fault localization/isolation,
•
400/1000 Fault •
detection, fault localization/isolation, Performance measurement
Link OAM IEEE 802.3ah
•
NETWORK MANAGEMENT SYSTEM
Three management systems are supported (PNMSj, PC-MG, MS5000)
•
Web based local craft terminal for local and remote NE access
•
iPASOLINK 100E Features
6 – 42 38 GHz Giga Bit Ether x 4
VLAN
QPSK – 256 QAM Ether R STP/Ring MSTP
AMR AMR Hitless
Ether OAM
Compact Size
(1+0) (1+0)/(1+1)
SYNC ETHER Natural Cooling
ERP
LDPC
LAG (LACP)
iPASOLINK 200 Features
6 – 42 38 GHz
QPSK – 256 QAM
Giga Bit Ether x 6 Ether Ring
16-32 xE1 VLAN
AMR AMR Hitless 1Xx STM1 1 STM1
Ether Ring RSTP/MSTP
(1+0)/(1+1)
Super PDH PDH Ring TDM
2 way
PWE PWE3
Ether OAM
XPIC
RADIO AGGREGATION
SYNC ETHER
LDPC
iPASOLINK 400A Features
Two Universal slots VLAN GbE(SFP) 6 – 42 GHz
Ether Ring
TDM Ring
10/100/1000Base-T QPSK – 2048 QAM
LAG 16-32 xE1 16-48
Hitless AMR AMR
Ether OAM 1X STM1 2xSTM1
(1+0)/(1+1)
SYNC ETHER Super PDH
4way Nodal
PWE
XPIC
RSTP /MSTP RADIO AGGREGATION
iPASOLINK 400 Features
VLAN GbE(SFP) 6 – 42 GHz
Ether Ring
TDM Ring
10/100/1000Base-T QPSK – 2048 QAM
LAG
16-32 xE1 16-64 Hitless AMR AMR
Ether OAM 1X STM1 2xSTM1
(1+0)/(1+1)
SYNC ETHER
Super PDH 4way Nodal
PWE
XPIC
IEEE 1588v2 RSTP /MSTP RADIO AGGREGATION
iPA S OLINK 1000 Features
RADIO AGGREGATION
6 – 42 GHz VLAN GbE(SFP)
QPSK – 2048 QAM Ether Ring
10/100/1000Base-T
Hitless AMRAMR
(1+0)/(1+1)
TDM Ring
LAG
16- xE1
2 x STM1
12 way Nodal
Ether EtherOAM OAM Super PDH
XPIC
CWDM
SYNC ETHER PWE
RSTP / MSTP
10GbE
iPASOLINK 1000 universal slot mounting Slot No.
1
2
3
4
5
6
7
8
N+0
1+0
1+0
1+0
1+0
1+0
1+0
1+0
1+0
Redundancy Group
SWGRP1
SWGRP2
SWGRP3
9
10
SWGRP4
11
12
13
14
1+0
1+0
1+0
1+0
SWGRP5
SWGRP6
(1+1)Hot standby
No1
No2
No1
No2
No1
No2
No1
No2
No1
No2
No1
No2
(1+1)Twin Path
No1
No2
No1
No2
No1
No2
No1
No2
No1
No2
No1
No2
(1+0) XPIC (1+1) XPIC
Slot No.
XPIC GRP1 Master
Slave
XPIC GRP2 Master
Slave
XPIC GRP3 Master
(1+1) XPIC GRP1 Master1 Master2 Slave1
1
2
XPIC GRP4
Slave
Master
XPIC GRP5
Slave
Master
Slave2
Master1 Master2 Slave1
(1+1) XPIC GRP2 Slave2 Master1 Master2 Slave1
3
4
5
6
7
Modem 16E1-A STM1-A GbE-A MSE-A AUX-A PTP-A
1
2
3
4
5
6
7
8
9
MC-M
10
MC-M
11 Term
12
13 PS
14 PS
* Slot 12 MSE card can be used with SW Key for more than 64E1 PWE. And can be used after using slot11 MSE card (F/W 3.01.04)
Slave
XPIC GRP6 Master
Slave
(1+1) XPIC GRP3
8
9
10
11
12
13
Slave2
14
Radio Configurations (400)
Radio Configurations (Redundancy)
iPASOLINK 1000
Slot-1
Slot-2
Slot-3
Slot-4
Slot-5
Slot-6
Slot-7
Slot-8
Slot-11
Slot-12
Slot-13
Slot-14
Radio Configurations (XPIC) Slot-1
Slot-2
Slot-3
Slot-4
Slot-5
Slot-6
Slot-7
Slot-8
Slot-11
Slot-12
Slot-13
Slot-14
Slot-1
Slot-2
Slot-3
Slot-4
Slot-5
Slot-6
Slot-7
Slot-8
Slot-11
Slot-12
Slot-13
Slot-14
iPASOLINK 1000
Radio Configurations - Nodal
S ite-F
S ite-C S ite-A S ite-B
iP aso 200 S ite-D
iPas o 400 iP aso 400 iP aso 400
S ite-E
4 way Nodal Configurations in one IDU (iPASOLINK 400) iPASOLINK 400 modem : standard operate with iPASOLINK
iPas o 400
2 way Nodal Configurations in one IDU iPASOLINK 200)
Baseband Configurations S TM-1
2 x ST M1 2 x ST M-1
S TM-1
All IP MS E ( PW E ) card MS E (P WE ) card 16 x E1
E1 + E ther (Dual Native)
GbE FE
PWE 16 x E1
GbE
16 x E1
16 x E1 152 E1
Native TDM + Native E ther S TM-1 (63E 1)x2 S TM-1 (63E 1)
16 x E1
16 x E1 FE/GbE
16 x E1
S uper P DH
16 x E1
iPasolink Radio using NEO ODU PDH
NHG2
NHG2
NEO IDU
PAS OLINK NEO PDH 16 x E1
16 x E1
79 E1
NHG2
NHG2 S TM-1 (63E 1) S TM-1 (63E1)
16 x E1
R eplace NEO IDU with iPA SOL INK
79 E1 + LAN
16 x E1
NHG2
NHG2 S TM-1 (63E1)
FE/GbE 16 x E1
R eplace NEO IDU with iPA SOL INK
S TM-1 (63E 1)
16 x E1 FE/GbE
Ethernet Ring protection - Protection Switching Time <2s (RSTP) < 50 ms ERP (ITU-T G.8032v2) •
•
TDM Ring protection - E1 SNCP - Protection Switching Time <50ms
Ethernet Ring TDM Ring
63 x E1
63 x E1
63 x E1
63 x E1
E1
ERP Ether Ring Protection –
Channelized STM-1 (200/400)
63xE1(400) 32xE1(200)
•
TDM Ring protection - E1 SNCP - Protection Switching Time <50ms
E1 S TM-1 S TM-1 Mux E1
E1 E1
iP aso 400/1000
TDM Ring
E1 S TM-1 S TM-1 Mux E1
Select enable radio alarms in STM-1 port setting
E1
iPASOLINK 100E Block diagram
CPU
L2 SW LAN INTFC Optional Clock
-48V
Power Supply
MODEM
Native Packet line
To ODU
iPASOLINK 200 Block diagram
Native TDM line E1 INTFC
DXC
MODEM MODEM
To ODU
16 x E1 (option)
Channelized STM-1 / STM-1 (option)
(option)
MUX/DEMUX
Native Packet line
L2 SW
Multi service Engine (option)
LAN INTFC
Optional ALM / AUX
Optional Clock
CPU ALM/SC/CLK
-48V
options
Optional Power input
Power Supply
FA N Module
iPASOLINK400 IDU Block Diagram Auxiliary
16 x E1 INTFC
IEEE 1588v2 PTP
4 x GbE
MSE (64xE1 PWE)
2x STM-1
Modem
PTP-A Universal Slot-Cards
Universal slot #1
Universal slot #2
Universal slot #3
Universal slot #4
Native TDM Bus
Native Packet Bus Control Bus
TDM SW
L2 SW
CPU PSPS
Main Board
16xE1
2xGbE (SFP) 2xFE/GbE
Alarm DSC Clock
Optional Clock
PSPS
- 48V - 48V Optional redundant Power supply
Synchronous Ethernet IEEE1588 (option Card) FA N Module
iPASOLINK 1000 IDU Block Diagram Modem 16 x E1 INTFC 2x STM-1 MSE (64xE1 PWE)
Universal Universal #n Universal slotslot #n-1 Universal slotslot #1 #2
HSI slotHSI 4 slotHSI 3 slotHSI 2 slot #
CWDM Universal slot
4 x GbE
10 GbE
Native TDM Bus Native Packet Bus FAN1 Control Bus NMS/NE1 TERM-M
TDM SW
L2 SW
CPU
1xV.11/1xRS-232C
PSPS 2xGbE Main Board (SFP) (Redundancy) 2xFE/GbE FAN2
Alarm DSC Clock
Optional Clock Synchronous Ethernet
1xV.11/1xRS-232C
PSPS
- 48V
- 48V Optional redundant Power supply
iPASOLINK 200/400 –Slots and Module configuration No universal slot
(All units are to be f ixed before Shipment)
2 x Fast Ether OR 2 FE + 2 GbE 4x 10/100/1000Base-T Option ODU Interface (1+0)/(1+1)/XPIC)
Main Board Not Changeable
LED Indication (Status/Alarms)
USB Memory Slot
LCT / NMS
OPTION CARDS
LAN Ports AUX HK DI/DO
NE1 - LAN Back-to-Back NE2-serial
SFP 2 x GbE
16 x E1 INTFC Ch STM-1 (or STM-1) Multi Service Engine
PS input
16 x E1 INTFC
Power Supply
ALM / SC/CLK
FAN Unit
Universal Slot-Cards Modem
4xGbE [2xRJ45, 2x(SFP)]
Channelized STM-1(or 2xSTM-1)
ODU Interface
Universal Slot-1
OW Jack Protect SW Call Button
LCT / NMS FE1 / FE2 or USB Memory Slot
AUX (HK Ext ALM)
Universal Slot-2
SFP 2 x GbE NE / FE2
Multi Service Engine
ALM / SC/CLK
16 x E1 TDM INTFC
IEEE1588v2 PTP-A
Universal Slot-3
Universal Slot-4
16 x E1 INTFC
FAN Unit Power Supply-1
Power Supply-2
iPASOLINK 1000 –Slots and Module configuration Universal Slot-Cards 4xGbE [2xRJ45, 2x(SFP)]
Multi Service Engine
Channelized STM-1(or 2xSTM-1)
16 x E1 TDM INTFC
AUX (HK Ext ALM, NE2)
Modem
GbE INTFC FE1 / FE2
SFP 2 x GbE
2xSTM-1 INTFC
16 x E1 INTFC Universal Slot-4
Main Card1 Main Card2
NMS/ NE1
SC
CWDM Power Supply-1
OW Jack Protect SW Call Button
USB Memory Slot
ALM / SC/CLK 10 G INTFC
Power Supply-2
FAN Unit
2FE or 4 X GbE (elect)
16- xE1
2 x GbE (LX/SX)
1X CH STM1
16 X E1
1 x STM-1
AUX (option)
PWE
Option
-48 VDC PS
FAN
AUX: HK, PS (Option) FAN
MAIN Board COMPONENTS iPASOLINK 200
MAIN BOARD
MODULE NAME
Remarks
CHASSIS
CHASSIS WITH MAIN BOARD
Required
FAN MODULE
AIR COOLING FAN
Required
E1×16CH + GBE (2XSFP SX / LX / T)
FIXED OPTION
MAIN BOARD 1000BASE-SX
+ 2FE OR OPTIONAL 4 X GbE GbE Optical SX
SFP
1000BASE-LX
GbE Optical LX
SFP
1000BASE-T
GbE Electrical
SFP
16E1-S
E1×16ch
Option slot
STM1-S
Channelized STM-1 or STM-1 Interface
Option slot
MSE-S
TDM PWE
Option slot
CLK2M-C
Clock module (for SYNCE, SNCP and Channelized STM-1)
AUX-S
EOW, HK, CLS
PS-S
-48V DC (external line inlet)
AUX Option PS In
Top Cover to be removed for installation Option-2
Option-1
Option-3
GbE SFP (Port-5/6)
AUX-S
16E1-S
PS-S
STM1-S
Top Cover to be removed for installation STM-1 SFP Optical S-1.1 CLK2M-C Option-4
Optical L-1.1 Electrical
iPASOLINK 100E IDU- INDICATORS
1
2 5
6
POWER INDICATOR
ETHER PORT 6 LINK STATUS ETHER PORT 5 LINK STATUS INDICATE MAINTENANCE ON STATUS INDICATE IDU ALARM STATUS
BLINKS-CABLE OPEN OR ODU CPU FAILURE
ETHER PORT 2 LINK STATUS ETHER PORT 1 LINK STATUS
iPASOLINK 200 IDU- INDICATORS & SWITCHES INDICATE MAINTENANCE ON STATUS
ETHER PORT 1 LINK STATUS
INDICATE IDU ALARM STATUS
ETHER PORT 2 LINK STATUS
INDICATE ODU2 RX STATUS
ETHER PORT 3 LINK STATUS
INDICATE ODU1 RX STATUS
ETHER PORT 4 LINK STATUS
INDICATE ODU2 TX STATUS
ETHER PORT 5 LINK STATUS
INDICATE ODU1 TX STATUS
ETHER PORT 6 LINK STATUS
TX1 TX2 RX1 RX2 ALM MAINT
ORDER
1
2
3
WIRE CALL BUTTON
PROTECT SWITCH ODU1 POWER ON / OFF SWITCH ODU2 POWER ON / OFF SWITCH BLINKS-CABLE OPEN OR ODU CPU FAILURE
4
5
6
2FE or 2 X GbE (elect) 16- xE1
2 x GbE (LX/SX)
1X CH STM1
Universal Slot1
16 X E1
2 x STM-1
Universal Slot2
-48 VDC PS
MSE
Universal Slot3
FAN
AUX: HK,
Universal Slot4 FAN
MAIN Board COMPONENTS iPASOLINK 400
MAIN BOARD
PS 1 MODULE NAME
CHASSIS
CHASSIS WITH MAIN BOARD
FAN-C
AIR COOLING FAN
MC-A4
PS 2
Main Card (E1×16CH + GBE (2XSFP SX / LX / T) + 2FE OR OPTIONAL 2 X GbE)
Code
Remarks Required
NWA-055294-001
Required
NWA-055298-001
Required
GbE-A
4 x GbE Interface card SFP options to select
NWA-055303-001
Universal Slot
MODEM-A
Standard Modem (QPSK-512 QAM) AMR
NWA-055300-001
Universal Slot
MODEM-A
Standard Modem (QPSK-512QAM) AMR PRTA
NWA-055300-102
Universal Slot
MODEM-EA
Standard Modem (QPSK-2048QAM) AMR PRTA
NWA-074398-322
Universal Slot
16E1-A
E1×16ch, 75 ohm to 120 ohm software selectable
NWA-055302-001
Universal Slot
STM1-A
2 x STM-1 Interface Card (SFP Options to select)
NWA-055304-004
Universal Slot
MSE
TDM PWE, ATM PWE etc.
NWA-055306-001
Universal Slot
AUX-A
EOW, HK, NE2 option
NWA-055307-001
Universal Slot
PTP-A
IEEE 1588v2 (Precision Timing Protocol) Slave and Boundary Clock)
NWA-055317-001
Universal Slot
CLK2M-C
Clock module (for SYNCE, SNCP and Channelized STM-1)
NWA-055289-002
option
PS-A4
-48V DC Power Supply Unit
NWA-055310-001
Required (at least one)
iPASOLINK 400 Main Board -Indicators
Maintenance (Yellow) Maintenance ON status Blink during reset, up / down loading
Port2 (Green) LAN Link Status
Port4(Green) LAN Link Status
Blink when data TX
Blink when data TX
Por1 (Green) LAN Link Status Blink when data TX
Port 3(Green) LAN Link Status Blink when data TX
Alarm (Red) Alarm Status
required
iPASOLINK 1000 (MDP-400MB-1BB) iPASOLINK 1000
MAIN BOARD
CHASSIS
CHASSIS WITH MAIN BOARD
FAN-M
AIR COOLING FAN
MC-M
Main Card ( GBE (2XSFP SX / LX / T) + 2FE OR OPTIONAL 2 X GbE)
NWA - 063847 Required NWA-061376-001
Required
NWA-061009-001
Required
GbE-A
4 x GbE Interface card SFP options to select
NWA-055303-001
Universal Slot
9 and 10
MODEM-A
Standard Modem (QPSK-256 QAM) AMR
NWA-055300-001
Universal Slot
1 to 8, 11 to 14
MODEM-A
Standard Modem (QPSK-512 QAM) AMR / PRTA
NWA-055300-102
Universal Slot
1 to 8, 11 to 14
MODEM-A
Standard Modem (QPSK-512 QAM) AMR / PRTA
NWA-055300-322
Universal Slot
1 to 8, 11 to 14
MODEM-EA
Standard Modem (QPSK-2048 QAM) AMR / PRTA
NWA-074398-322
Universal Slot
1 to 8, 11 to 14
16E1-A
E1×16ch, 75 ohm to 120 ohm software selectable
NWA-055302-001
Universal Slot
1 to 14
STM1-A
2 x STM-1 Interface Card (SFP Options to select)
NWA-055304-004
Universal Slot
1 to 14
MSE
TDM PWE, ATM PWE etc. (up to two cards)
NWA-055306-001
Universal Slot
1 to 14
AUX-S
EOW, HK, NE2 option
NWA-055307-001
Universal Slot
8 or 14
TERM-M
NMS / NE1
NWA-061379-001
Term Slot
Term
CLK2M-C
Clock module (for SYNCE, SNCP and Channelized STM-1)
NWA-055289-002
option
NWA-061137-001
Required (at least one)
PS-M
-48V DC Power Supply Unit
(40 Km)
iPASOLINK 1000 Main Board –Indicators/connectors Maintenance (Yellow) Maintenance ON status
Port2 (Green) LAN Link Status
Port4(Green) LAN Link Status
Blink when data TX
Blink when data TX
Blink during reset, up / down loading
ON LINE ONLINE Status
Por1 (Green) LAN Link Status
Alarm (Red) Alarm Status
Port 3(Green) LAN Link Status
Blink when data TX
Blink when data TX
ALM/SC/CLK (High Density D-Sub 44 Pins, Female)
1 Vbus
1 ALM2 OUT (NO)
16 ALM2 OUT (COM)
31 ALM2 OUT (NC)
1 NMS TXD(+)
1 TXD(+)
2 ALM1 OUT (NO)
17 ALM1 OUT (COM)
32 ALM1 OUT (NC)
2 NMS TXD (-)
2 TXD (-)
3 GROUND
18 Ground
33 V.11-1 FP input(+)
3 NMS RXD (+)
3 RXD (+)
4 V.11-1 Data in(+)
19 V.11-1 clock in(+)
34 V.11-1 FP input(-)
4 Not Connected
4 Not Connected
5 V.11-1Data in(-)
20 V.11-1 clock in (-)
35 V.11-1 FP output(+)
5 Not Connected
5 Not Connected
6 V.11-1 Data out(+)
21 V.11-1 clock out(+)
36 V.11-1 FP output(-)
22 V.11-1 clock out(-)
37
2 D (-)
6 NMS RXD (-)
6 RXD (-)
7 V.11-1Data out(-)
3 D (+)
7 Not Connected
7 Not Connected
8
23
38
4 Ground
8 Not Connected
8 Not Connected
9
24
39
Port 1/2 (RJ-45)
10
25
40
(USB) Type1
LCT (RJ-45)
11
26
41 RS-232C-1Data out
12 RS-232C-1Data in
27 Ground
42
13
28 Ground
43 EXT1 CLK OUT (+)
14 EXT1 CLK in(+)
29 Ground
44 EXT1 CLK OUT(-)SG
15 EXT1 CLK IN(-) SG
30 NC