Worksheet in Equipment Rental Rates

ASSOCIATION OF CARRIERS AND EQUIPMENT LESSORS (ACEL), INC. EQUIPMENT GUIDE BOOK EDITION 24

PREFACE The 24th edition of the ACEL Equipment Guidebook has been updated to conform to the volatility of the changing market . Industry experts and association members have been consulted to come up with the best possible approach for the computation of rates that would approximate the lessor's operating cost and other incidentals. We have factored in such variables like acquisition cost, depreciation, spare parts replacement costs, operators wages, full dollar fluctuations and interest rates, ect. As in our earlier edition we are using dollar rates for the computation and we have considered factors like equipment rating, testing and standardization cost. Another fomulais used for light and medium equipment. Basic reference to the average utilization per year for type of equipment have been incorporated and useful features such as economic life, tire and undercarriage life and salvage factor have been sourced from a reputable cost reference and included in the formulation for a more realistic approach in the estimation of recovery instrument. The rates listed are based on five (5) year old equipment and such rates are mere standards. This being the case actual rates may vary depending on worksite condition, age and availability of equipment to be used and the attachments needed. the rates of new and slightly used equipment shall equal the prevailing rates multiplied by the factors listed below: ASSOCIATION OF CARRIERS AND EQUIPMENT LESSORS (ACEL), INC. EQUIPMENT GUIDE BOOK EDITION 25

PREFACE The 24th edition of the ACEL Equipment Guidebook has been updated to conform to the volatility of the changing market . Industry experts and association members have been consulted to come up with the best possible approach for the computation of rates that would approximate the lessor's operating cost and other incidentals. We have factored in such variables like acquisition cost, depreciation, spare parts replacement costs, operators wages, full dollar fluctuations and interest rates, ect. As in our earlier edition we are using dollar rates for the computation and we have considered factors like equipment rating, testing and standardization cost. Another fomulais used for light and medium equipment. Basic reference to the average utilization per year for type of equipment have been incorporated and useful features such as economic life, tire and undercarriage life and salvage factor have been sourced from a reputable cost reference and included in the formulation for a more realistic approach in the estimation of recovery instrument. The rates listed are based on five (5) year old equipment and such rates are mere standards. This being the case actual rates may vary depending on worksite condition, age and availability of equipment to be used and the attachments needed. the rates of new and slightly used equipment shall equal the prevailing rates multiplied by the factors listed below:

ACEL has delisted equipment which are twenty (20) years old or more, specifically with earthmoving equipment. However, these rates can be requested from the ACEL Secretariat. All brand new models listed in the Guidebook are equipped with internationally accepted safety devices in accordance with the requirements of the Department of Labor and Employment (DOLE) Order No. 13, Series of 1998 on Guidelines Governing Occupational Safety and Health in the Construction Industry. All illustrations and trademarks of manufacturers have been reproduced by photo offset method from originals. "The Equipment Specification Guide Section" is intended for information purposes and should not be construed to depict contrary representation. Government agecies like the Department of Public Works and Highways (DPWH) , National Irrigation Administration (NIA) , Department of Interior and Local Government (DILG) , etc.) have endorsed the Equipment Guidebook as basis for project cost estimates. ACEL acknowledge that the Guidebook is a collaboration effort of its members and the different suppliers and dealers of construction and allied equipment. Updating of the guidebook is a continuing process and new edition will be released as needed.

PROFILE The upscale in construction activities in the mid-sixties was the start of the glory years of the construction industry. Massive infrastructure development was being done in various sectors such as power, irrigation, transport, commercial, housing and real estate development, etc. The upbeat scenario was a most welcome development but obstacles were inevitable. The formidable challenge of meeting the demands of the time called for a pooling of all possible resources and one of the more immediate problems that surfaced was the dearth and serviceability of the construction equipment in use during that time. Due to the prohibitive cost of acquiring brand new equipment, or even second hand units, for that matter, the contractors bonded together to come up with a workable plan to address the shortage of equipment. Eight (8) Charter Members were the pioneer members of ACEL and these companies were the following: H. R. Lopez, Inc.; Monark International, Inc.; Heights Construction, Inc.; Alas Contruction, Inc.; Bormaheco, Inc.; Pacific Equipment Corporation; Dimson (Manila), Inc.; and Heavy equipment Service Co., Inc.

ACEL first introduced the practice of equipment leasing and rental. Today, this is considered the best possible alternative to owning construction equipment that will necessitate costly maintenance and upkeep. The first agreement forged by the group was the standardization of rental rates that will apply to all members owning and operating the same kind of equipment. The end result of all these efforts was the first ACEL Equipment Rental Rates Guidebook, which came out May 28, 1966. Equipment Rental Requisition forms were also standardized and were used as the basis for rental rates contracts as well as reference for rentals, sales and/or purcahse of equipment. Through the years, the rental rates were revised and updated to adapt to the changing needs of the market. In 1979, a definite formula that approximates a lessor's owning and operating costs was accepted by the generals membership. With this new approach in the computation rental rates, careful study was given to variable factors that influence rates such as acquisition cost, depreciation, replacement costs, operator's wages, fuel and other costs. And to properly monitor this computerized database has been develop. Moreover, terms and conditions were better defined and broadened to cover all possible nuances of the trade. ACEL's unified vision to professionalize the industry was becoming more and more a reality. In 1981, Equipment Guidebook No. 15 which is an expanded edition that equipment specifications and profile was published. This was later revised two years later because of the need to keep abreast of changing conditions in the industry. This particular edition was in collaboration with the Bureau of Equipment of the Department of Public Works and Highways whose endorsement of the Guidebook continues to this day. The subsequent editions of the guidebook included provisions for automatic escalation formula, inclusion of ports handling equipment and with Guidebook No. 19, ACEL launched a book on equipment performance, "The Eequipment Performance Handbook Edition 1 Vol. 1". The specifications contained in this handbook will help in equipment sourcing and identification since this is a conprehensive guide for those not too acknowlegeable with equipment. ACEL has also, by this time, delisted some types of equipment which have become obsolete in the industry. In November 1992, the ACEL Equipment Guidebook, 20th edition was releaed. One useful feature of this particular edition is the inclusion of a basic reference on the average utilization per year for each type of equipment. This gives a more realistic approach in the estimation of recovery investments. For the 21st edition of the internationally accepted safety devices in accordance with the requirements of the Department of Labor and Employment Order No. 13 on guidelines governing Occupational Safety and Health in the construction industry. The newest edition is ACEL Equipment Guidebook, Edition 22 which incorporates provisions to consider the impact of dollar rates on labor and fuel; equipment rating; testing and standardization cost and other triggers of economic activity, as well as the inclusion of a separate formula for light and medium equipment. Also included in this edition is the ACEL Safety Manual for Heavy and Stationary Equipment. The ACEL equipment Guidebook Edition 23 was released in December 2006. This particular edition of the guidebook has been updated to include computations that would use dollar rates on operated dry and bare month. It also featured estimates on fuel consumptions. Endorsements for this issue come from government agecies like the DILG / DPWH / DTI / MMDA / MWSS NEA / NIA and PPA. In January 2009, Edition 24 of the ACEL Equuipment Guidebook was released to incorporate updates in the computation of rates. For this issue peso value of computed rates were also shown. This time endorsements were received from PPA / PCA / NPC / NIA / NEA / MMDA / DTI / DOTC / DPWH and DILG. To better improve the services to its members various initiatives were done, namely: 1) inquiries regarding retals were referred to member companies; 2) assistance were given to members in the purchase or disposal of parts and materials; 3) set-up of an agreed minimum operation of equipment rented on a bare rental basis of 200 hours per month; 4) enforced the general agreement that courtesy discounts of up to 10% be applied among members; 5) public certifications of equipment were issued to enable members to participate in bids; and 6) made representations with the US Bases in Clark and Subic for the accreditation of its members to enable these companies to participate in bids and to provide opportunity to bid for US Government Property Sales. From that time on, ACEL became the pulse and the voice of the industry. Throught the years, ACEL has been very successful in rpotecting the rights of its members. It continues to establish linkages with other relevant organizations like insurance firms, freight and shipping companies, government agencies, etc. Together with the Philippine Constructors Association, Inc. and other industry organizations, it supported actions on the reduction of duties and taxes on undercarriage parts and successfully opposed the imposition of the Tariff Commission of additional dumping duties on tractor parts from Italy, among others. The association has been in the forefront of activities in manpower development and has worked vigoruosly fro the promotion of construction safety in work sites. The years that followed showed ACEL giving priority to manpower development. The subsequent boon and bust of the Philippine construction industry played a significant role in ACEL's thrust to focus on manpower development and to come up with a system that can gauge workers' capabilities and competence. Essentially, the focus is four-fold, namely: 1) to develop norms in establishing career paths for operators and mechanics, 2) to develop programs for mechanics and operators in order to upgrade their knowledge, 3) to develop standards to equitably measure productivity; and 4) to develop programs to train future testors/assessor. By 1989, the association initially entered into a Memorandum of Agreement with the National Manpower Youth Council (NMYC) to develop six (6) Trade Skills Standards, namely: Wheel Loader Operator, Motor Grader Operator, Hydrolic Excavator (Backhoe) Operator, Tower Crane Operators, Rough-Terrain Crane Operator and Truck Mouted Crane Operator. The following year, three (3) Trade Skills Standards and Trade Test Standards were developed and these are the Hydrolic Mechanic, Heavy Equipment Electrician and Crawler Tractor (Bulldozer) Operator. Subsequent years saw the finalization of more test standards which are the Crawler Crane Operator, Rigger, Roller Operator and the Heavy Equipment Operator. The pilot testing and Certification Program for Construction Heavy Equipment Operation and Maintenance was a collaborative effort between ACEL, the Construction Manpower Development Foundation (CMDF) and the National Manpower Youth Council (NMYC) . The program provides testing and classification of operators and mechanics both in the government and private sector. In 1993, Career Path Programs for Mechanics, Operators and Engineers have been finalized and implemented. The program underscored the importance of upward mobility, occupational respectability and continuing improvement of the workforce. A partnership between the National Manpower and Youth Council (NMYC) , Construction Manpower Development Foundation (CMDF) and ACEL was forged to come up with a suitable program for all the levels. It was also during the year that ACEL through the NMYC collaborated with

the Japan International Training Corporation (JITCO) which facilitated the transfer of technology of trainees sent by Philippine companies. The project is a purely private arrangement between Philippine and Japanese companies with both governments acting as facilitators. Duration of the training was a maximum of two years of technical intership on-site program. ACEL with the help of CMDF and the Ayala Foundation have come up with a financing scheme that enabled workers to undergo courses at CMDF on a Study Now, Pay Later Scheme. In this set up ACEL was tasked to provide information on blue collar skills requirements and identification of possible candidates. ACEL member companies committed to provide some incentives like payments of salaries during training, corresponding salary adjustments for eligible trainees, subsidized tools and assurance of work placements for project worker's status. Meanwhile, a comprehensive year long program of seminars has been developed and continues to be offered to date. As a part of continuing educationprogram, these technical seminars included the following: Failure Damage Analysis and Wear Control, Hydrolics: Why does ir fail?, Proper tools and Wire Ropes Cable Management, Engines: Operating Cost Reduction, Trouble Shooting and Repowering Techniques, Filtration Within the System, Welding, the Truck Mouted and Rough Terrain Crane Operation, Safety Rigging Works, Equipment Managers' Course, Trainers Training Program, Reducing Operating and Maintenance Cost of Heavy Equipment, Preventive Maintenance Management, among others. ACEL has also sponsored the Technology Forum for all PHILCONSTRUCT Exhibitions since it was started in 1995. the forum featured seminars on equipment management, construction safey, manpwer development, construction processes and technology. In recognition of ACEL's crucial role in manpower development, Technical Education and Skills Development Authority (TESDA) (formerly the NMYC) has accredited ACEL as solely responsible for the implementation of programs of assessment and certification of middle level manpower in the heavy equipment sector. ACEL conducts regular trade testing which is composed of a written and practical performance test in the following occupational titles: motor grader operator (A&B class) , hydrolic excavator operator (A&B class) , wheel loader operator (one category) , tower crane operator (A&B class) , truck mouted crane operator (A&B class) , crawler crane operator (A&B class) , rigger (general - one category) , heavy equipment electrician (A&B class) , hydrolic mechanic (one category) , bulldozer operator (A&B class) , heavy equipment mechanic (3rd, 2nd, & 1st class) and road roller operator (one category) . A certificate of competency and a competency certification card are issued to all successful examinees. In December 2005, as a part of its continuing program fro the development and upgrading of competency of the nation's manpower resources, the Association of Carriers and Equipment Lessors, Inc. and the Technical Education and Skills Development Authority (TESDA) have signed the Memorandum of Agreement (MOA) that would give ACEL the sole responsibility of implementing a nationwide and unified system of occupational skills assessment and certification in the heavy equipment sub sector of the construction industry. To date, renewal of this ACEL accreditation continues to be given as a sign of the trust and confidence of TESDA in ACEL as an organization. In its role as an Accredited Organization (AO) , ACEL which has the technical capability and resouces to undertake the program will serve as TESDA's partner in strengthening industry-led assessment and certification that will result in developing world class manpower resources and, thus, help in increasing the middle manpower's employability both locally and internationally. In January 2006, the following Competency Standards, Competency Assessment Tools and Curriculum Standards were developed for heavy equipment sub sector: bulldozer, hydrolic excavator, motor grader, backhoe-loader, on-highway dump truck, off-highway dump truck (rigid) off-highway dump truck (articulated) , road roller, forklift, concrete pump, transit mixer, screed attachment, paver, gantry, stacker, heavy equipment servicing (mechanical) , crawler crane, truck mounted crane, rough terrain crane, tower crane, and rigging. In 2007-2008, ACEL continued to conduct various trainings on forklift operation, mobile crane operation and rigging, hydrolic excavator operation, construction safety and health courses for site officers and loss control management course. It also finalized the development of training modules for additional skills in the heavy equipment sector. A procedure manual for accreditation of assessment center and competency assessors was also finalized. In 2009, ACEL signed a Memorandum of Agreement (MOA) with TESDA to implement the Pangulong Gloria Scholarship Program which aimed to provide the training and scholarship to selected beneficiaries. TESDA will provide funding while ACEL will recruit and train nominees for the following skills: Hydrolic Excavator, Bulldozer, Forklift, Wheel Loader, Rough Terrain Crane, Truck Mounted Crane, Road Roller and Rigging. ACEL is also tasked to conduct a competency assessment of each nominee prior to the issuance of a national certification. During the 50th Anniversary of the Philippine Constructors Association in November 1995, ACEL played host to the biggest equipment show ever staged in the country. Held at the Ortigas Complex, the event showcased the equipment fleet and capabilities of ACEL members. The latest models and brands of heavy equipment and support tools were exhibited during the three-day event. Highlights of the show were the holding of the Skills Olympics, the House Building Competition and the Equipment Show. At this point the Association has taken steps to increase the coverage of companies eligible for membership to include mining firms, real estate developers, quarrying firms and financing/banking establishments. The rationale being that these entities could be good sources of information and assistance to ACEL members in their pursuit of their businesses. In May of 1996, the name of ACEL was changed to the Association of Carriers & Equipment Lessors, Inc. The word "Construction" was changed to "Carriers" to encompass all entities and services included in its scope of operations. ACEL has transcended borders and has establised chapters in Cebu and Davao in 1988 and 1997 respectively. As in the national chapter, focus has always been on manpower development and establishment of equitable rental rates. DOLE Order No. 13 which set the guidelines governing Occupational Health and Safety in the Construction Industry was a landmark policy that ensures the safety of construction workers in the worksite. ACEL as an accredited organization of TESDA formulated accreditation test for equipment inspectors and test standards to comply with the minimum standards for safety to be used in the workplace.

Another focus has been the establishment of closer ties with allied services and producers for sources of spare parts, machines and other needed supplies as used in the industry. More importantly, the association has forged alliances with the government and private sector and continues to buildup the relationship in pursuit of its interests. It has done continuous liaison work with agencies like DOLE, DPWH, BOE, MWSS, NIA, etc. The association has made its position known regarding issues affecting the industry such as its opposition to the entry of foreign rental companies in the country and deliberations regarding the mandatory registration of heavy equipment. ACEL has also committed its help and assistance to the National Disaster Coordinating Council (NDCC) in times of calamities and disaster. In an agreement forged with the NDCC, ACEL will provide free of charge through the equipment resources of its membership whatever construction heavy equipment NDCC might require during times of disasters and emergencies. This is part of ACEL's commitment to the community and country. In April 2000, ACEL moved into its new corporate office at the Jollibee Plaza Condominium at Ortigas Complex courtesy of generous ACEL members who advanced out of pocket the initial payment for the office. This project was the first for the newly formed ACEL Foundation, Inc. which was incorporated to provide leeway for ACEL to participate and undertake activities not, otherwise, provided for in the Association's charter. Hosting of sports activities have been a continuing concern for ACEL. Golf, badminton, billiards and bowling tournaments have been held to ensure that camaraderie is forged and the physical well being and fitness program for members are addressed. ACEL has come a long way since it was started in 1966. the unsefish efforts of the men and women of the industry have contributed, in a large measure, to the open and level playing field now being enjoyed in the industry. The unified vission ACEL has adopted will be its guiding light through the coming years.

ACEL PREAMBLE The preamble of the Association of Carriers & Equipment Lessors (ACEL) , Inc. By-Laws states: "We, the members of the Association of Carriers & Equipment Lessors, Inc., realizing the present need for integration of various companies engaged in the equipment leasing or rental business, and to carry out effectively its purposes upon which it was created, do hereby adopt and promulgate the By-Laws." For the past forty three (43) years, industry trends and practices, economic conditions and even personalities have undergone drastic changes but the bold and clear-cut aims of ACEL as envisioned and set by its pioneers and which evolved through time are immutable. These objectives are: For the Industry 1. To foster mutual understandin and cooperation among its members for their protection; 2. To elevate the standard of equipment leasing or renting business to be more responsive to the needs of equipment lessors/lessees, to protect the public from unscrupulous and unreliable equipment lessors, and to eliminate activities and practices inimical to good equipment leasing business; 3. To promote continuous training in order to improve productivity and obtain higher manpower efficiency to meet world class standard to equipment operation, maintenance and production; 4. To promote general health, safety and welfare of those employed in the equipment leasing industry; 5. To force adherence to the Code of Ethics relevant to the practice in the equipment leasing industry; 6. To enjoin members to submit to the rules of arbitration as an effective mode of settling disputes in the industry; 7. To update, from time to time, the member companies with new trends in equipment leasing and maintenance, to keep the members abreast with the practices in the international leasing industry by, among others, gathering, preparing, disseminating through publication and other medium, authentic information pertinent to the equipment rental business; 8. To provide a forum for free exchange of ideas among members, clients and government agencies/institutions involved in equipment leasing; 9. To provide technical assistance and proper coordination with various government agencies and instrumentalities in order to facilitate the conduct of equipment leasing business; 10. To initiate and support enactment of laws and other forms of legislation favorable to the growth of the equipment leasing business; 11. To assist the members in the importation, purchase and acquisition of equipment, parts and accessories by taking advantage of qoutas in case of inadequate supply; 12. To assist members in availing of tax incentives provided by the government; 13. To acquire, construct, lease, manage and operate, for its use and benefit, an office building, the land thereon and auxiliary services therein such as assembly and lecture halls, service bar and restaurants to cater to its members, library, etc. and to lease such spare spaces it may not need; 14. In general, to do all such things and perform such acts and functions as may be reasonably necessary and essential to accomplish the purposes and objectives for which the association is organized. For Individual Benefits 1. To achieve mutual protection of the companies against malpractices of employees and other workers; 2. To promote mutual assistanc and collaboration among its members towards the fulfillment of members, undertakings under their contracts; 3. To help the Association in policing the ranks insofar as malpractices which are detrimental to the interest of the individual member. ASSOCIATION OF CARRIERS & EQUIPMENT LESSORS, INC. EQUIPMENT RENTAL RATES 2009 1.0 EARTHMOVING EQUIPMENT

1.1 TRACTORS, CRAWLER (WITH DOZER) MODEL

SERIAL NO./ SERIES (YR.MFG.)

FLYWHEEL HORSEPOWER

FUEL CONSUMPTION (LTR/HR)

OPERATED DRY

1.1.1 CATERPILLAR 850.0 770.0 580.0 520.0 520.0 410.0 370.0 370.0 305.0 285.0 285.0 335.0 240.0 240.0 230.0 200.0 215.0

* D11R D11N * D10R D10N D10N D9R * D9N D9N PS D8R D8N PSDS D8N PSDS D8L PS * D7R SERIES II D7R PS LGP D7R STD D7G PS D7H LGP SERIES II D7H PS/DD/PSDS

OPERATED HOUR

8ZR1 - up, 9XR (199687.0-113.0 16,969 74Z (1986 - 93) 85.0-93.0 14,178 AKT (2001 - 04) 58.0-75.0 10,607 3SK1 - up (1993-96) 62.0-66.0 7,859 2YD1 (1987-93) 62.0-66.0 7,026 ACL (2000-04) 46.0-59.5 7,424 1JO (1986-94) 44.0-53.0 5,115 15D1-up (1986-94) 44.0-53.0 4,433 7XM1-up (1996-02) 32.0-41.5 6,120 5TJ1 - up (1991-96) 28.0-38.0 5,225 9TC1, 1XJ1 - up (1986-92) 28.0-38.0 4,741 53Y, 4FB, 7JC, 7YB (1982-92) 40.0-45.0 4,881 BRP (2006-08) 24.5-31.5 6,043 3ZR1, 5MR1-up (1997-02) 25.0-28.0 5,654 3ZR1 & 5MR1 (1997-up) 25.0-28.0 5,460 72W,91V, 92V, 65V (1977-93) 26.0-34.0 3,106 4FG (1985-90) 25.0-28.0 3,726 79Z, 2RG, 2SB, 77Z 5BF (1986-93) 215.0 25.0-28.0 2,595 ATTACHMENTS: For certain models of Tractors, Crawler (with dozer) additional rates for attachments are allowed: Hyd. Ripper 1-3 Shanks - Add 20% rate 10% of rate Side Boom - Add 20% of rate * Current Models

21,211 17,722 13,258 9,824 8,782 9,280 6,393 5,542 7,649 6,531 5,927 6,102 7,554 7,068 6,824 3,883 4,657 3,244

BARE MONTH

2,757,469 2,303,873 1,723,579 1,277,133 1,141,712 1,206,348 831,115 720,434 994,422 848,991 770,484 793,221 982,020 918,775 887,172 504,790 605,462

421,707 Towing Winch - Add

1.0 EARTHMOVING EQUIPMENT (Cont.) 1.1 TRACTORS, CRAWLER (WITH DOZER) (Cont.) MODEL

* D6R III D6R XL D6R LGP D6R STD D6M XL D6H SERIES II PSDS/DD D6H PS/DD/PSDS D6H LGP SEIRES II PS/DD * D5N LGP/XL D5M XL FTC D5M LGP FTC D5M D5H SERIES II PS D5H SERIES II DD D5H PS/DD D5H LGP SERIES II PS/DD * D5G / XL D5C XL III HST D5C XL D5C LGP III HST D5C LGP III D5C III HST D5C III * D4G / XL D4H SERIES II PS/DD D4H III HST

SERIAL NO./ SERIES (YR.MFG.) HCD (2005-07) 6FR1 - up (1997-up) 4HN, 7AR, 4TR, 6GR, 8TM 8LN, 9NP, ADE (1997-02) 6FR (1997-up) 2YS, 3WN, 4HS, 5WR 6LR, 9ZM, (1996-06) 72K (1992-96) 4RC, 4YF (1985-1990) 5KK, 9KJ, 8ZJ (1993) AKD, CKT, AGG, CFH (2001-08) 4JS, 5ES, 6GN (1996-03) 3CR, 3DR, 5FS, 6AS 7LR (1996-03) 6AS00159 (1996 - up) 3MD (1991-96) 1YD (1991-96) 3MD1, 1YD1 - up (1986-93) 9HC, 1DD, 4KD (1991-96) FOH, WBG (2001-07) 7PS. 8ZS (1997-02) (1991-93) 6ZL (1994-99) 4WS (1997-02) 9DL (2000-02) 9AS (1994-00) CFN (2001-06) 2AC, 8PB (1991-96) 8PB, 2AC (1991-96)


OPERATED DRY

OPERATED HOUR

BARE MONTH

19.0-27.0 17.5-25.0 17.5-25.0

4,754 4,228 4,258

5,943 5,284 5,323

772,590 686,972 691,977

185.0 140.0

17.5-25.0 12.5-19.5

3,961 3,656

4,951 4,569

643,643 594,022

165.0 165.0 165.0 121.0 110.0 110.0

17.5-25.0 17.5-28.0 17.5-28.0 11.5-16.0 10.5-14.5 10.5-14.5

2,703 2,082 2,545 3,401 2,825 2,988

3,379 2,603 3,181 4,251 3,531 3,736

439,296 338,338 413,556 552,630 459,030 485,628

110.0 120.0 120.0 120.0 120.0 90.0 90.0 90.0 90.0 90.0 90.0 90.0 80.0 95.0 95.0

10.5-14.5 12.5-19.5 12.5-19.5 12.5-19.5 12.5-19.5 13.0-15.0 9.5-13.0 9.5-13.0 9.5-13.0 9.5-13.0 9.5-13.0 3.5-13.0 11.0-13.0 10.5-14.5 10.5-14.5

2,145 2,034 1,993 1,576 1,401 2,377 1,643 2,042 1,766 2,214 2,058 1,960 2,175 1,458 1,074

2,682 2,542 2,492 1,970 3,001 2,971 2,043 2,552 2,208 2,768 2,573 2,450 2,719 1,823 1,343

348,634 330,473 323,859 256,113 390,104 386,230 265,551 331,760 287,001 359,788 334,477 318,461 353,470 236,951 174,603

FLYWHEEL HORSEPOWER


OPERATED DRY

OPERATED HOUR

BARE MONTH

1,616 1,034 1,501 1,689 1,346 1,898

2,020 1,293 1,877 2,111 1,682 2,372

262,548 168,025 243,958 274,417 218,647 308,360

FLYWHEEL HORSEPOWER 1.1.1 CATERPILLAR (Cont.) 185.0 185.0 185.0

*Current Models


D4H LGP SERIES II PS/DD D4E LGP D4C XL III HST D4C LGP III HST D4C LGP SERIES II PS * D3G / LGP

SERIAL NO./ SERIES (YR.MFG.) 9DB (1989-90) (1990-93) 7KG, 9BG (1990-93) 4LC,, 6FS, 7SL, 8EL (1994-02) 2CJ (1987-90) CFF, BYR (2001-07)

1.1.1 CATERPILLAR (Cont.) 95.0 75.0 80.0 80.0 78.0 70.0

9.5-13.0 9.5-13.0 9.5-13.0 11.0-13.0

D3C XL III HST D3C LGP III HST D3C SERIES II PS D3C LGP SERIES II PS * TD40E * TD25M TD25G TD20H TD20G * TD15M TD15H TD15E TD15C PS/TC TD12 PS/TC * TD10M TD-8G FD255

5ZG (1990-93) 8DG (1990-93) 1PJ, 3RF (1987-90) (1987-90)

70.0 70.0 67.0 67.0 1.1.2 DRESSTA (INT'L. HOUGH/DRESSER) 2006 520.0 P074004-4030 (2005) 330.0 2087-P074008 (1987-05) 320.0 P052501-73092 (2000-05) 225.0 35000-P072092 (1987-00) 225.0 P033001-3023 (2005) 190.0 P032551-3024 (2002-05) 175.0 P030501-3024 (1987-05) 165.0 501-P063172 (1972-05) 140.0 2006 110.0 (1987-94) 101.0 K005666-69 (1987-94) 78.0 1.1.3 FIAT-ALLIS / HITACHI 30110-209 (1996-98) 240.0

7.5-11.0 7.5-11.0

1,347 1,440 1,042 1,142

1,684 1,800 1,302 1,428

218,933 233,948 169,312 185,614

12,458 7,820 3,343 5,628 2,771 4,550 4,427 2,065 1,888 1,489 2,531 1,104

15,573 9,775 4,179 7,036 3,464 5,688 5,534 2,582 2,361 1,861 3,164 1,379

2,024,490 1,270,750 543,257 914,628 450,307 739,440 719,433 335,621 306,878 241,956 411,320 179,322

4,464

5,580

725,439

OPERATED DRY

OPERATED HOUR

BARE MONTH

5,599 3,554 2,449 1,776 1,236 818 747 1,412

6,999 4,443 3,061 2,220 1,544 1,022 934 1,764

909,909 577,577 397,969 288,574 200,772 132,847 121,407 229,372

1,890 1,792 1,411 2,914 2,574 1,433

2,363 2,240 1,763 3,642 3,218 1,791

307,164 291,148 229,229 473,473 418,275 232,804

86.7-112.2 89-115 54.5-70.6 55-70 15.9-18.0 49-56 42.7-55.3

24,435 12,567 13,085 7,936 7,730 6,878 11,773

30,544 15,709 16,356 9,920 9,662 8,598 14,716

3,970,720 2,042,183 2,126,280 1,289,574 1,256,112 1,117,688 1,913,080


OPERATED DRY

OPERATED HOUR

BARE MONTH

26-36 20.1-30.2 20.1-30.2 24-30 24-30

6,136 8,280 7,559 9,832 5,360 4,998 3,795 3,419 3,146 3,186 6,005 5,738 4,404 4,465

7,670 10,350 9,449 11,728 6,700 6,247 4,743 4,274 3,933 3,982 7,506 7,172 5,504 5,581

997,139 1,345,500 1,228,370 1,524,640 871,013 812,097 616,616 555,555 511,225 517,660 975,780 932,360 715,572 725,582

*Current Models



FD30C FD30B FD20 FD 14E FD9 FD7 FD5 10C

400183 (1995) 300163-394 (1986-92) 6028-10195 (1980-95) (1989-93) 20535-30467 (1985-93) 250107-1856 (1983-92) 200176-2384 (1983-92) 60104-606 (1979-92)

650G-SERIES IV 550G-SERIES IV 450G-SERIES IV DX175 DX145 DX75M

736389-832600 (1987-97) 736382-832598 (1987-97) 736319-832595 (1987-97)

* D475A-5 D475A-3 * D375A-5 D375A-3 D375A-2 D355A-5 * D275A-5

20003-30069 (2005-08) 1005-10411 (1987-96) 18001-up (2005) 15193-17099 (1986-96) 16001-up (1989-93) 12622-up (1989-93) 2005

FLYWHEEL HORSEPOWER 1.1.3 FIAT-ALLIS / HITACHI (Cont.) 349.0 340.0 223.0 150.0 107.0 78.0 63.0 122.0 1.1.4 JOHN DEERE/HITACHI 90.0 80.0 70.0 167.0 127.0 73.0 1.1.5 KOMATSU 860.0 770.0 525.0 525.0 525.0 404.0 410.0


*Current Models


D275A-2 * D155A-6R D155A-5 * D155AX-5 D155AX-3 D155A-3 D155A-2 D155A-2 D155A-1 D135A-2 * D85EX-15 * D85PX-15 D85P-21 D85E-21

D85E-SS-2A D85A-21 D83E-1 * D68E-SS-12 * D65EX-15

SERIAL NO./ SERIES (YR.MFG.) 10028-444 (1992-02) 80003-693 (2007-08) 65001-up (2001) 2001 J60004-543 (1994) 6001-up (1994) J52146-171 (1994-95) 1301-up (1988-93) 6880-30428 (1972-95) 10301-up (1989-93) 1001-up (2005) 1001-up (2005) 3001-up (1987-up) 35001-up (1994)

FLYWHEEL HORSEPOWER 1.1.5 KOMATSU (Cont.) 405.0 302.0 302.0 310.0 302.0 302.0 320.0 285.0 320.0 285.0 240.0 240.0 225.0 225.0

43-55 24.8-37.2 25.5-38.2 34-39 34-39 38-45 26-36

3001-up (1994)

200.0

16.8-25.2

3,188

3,985

518,089

35001-up (1992-up) 1001 1004-NB1203 (1987-95) 67001-up (2005)

225.0 205.0 155.0 190.0

24-30

4,321 2,634 3,948 4,242

5,401 3,292 4,935 5,302

702,130 427,999 641,550 689,260

15.8-23.7

* D65PX-15 D65PX-12 D65P-12 D65EX -12 D65E-12 D65P -11 D60P-11 D65E-8 D65A-8

67001-up (2005) 67001-up (1992-96) 60001-up (1994) 60001-up (1992-93) 60001-up (1992-up) 50286 (1987-96) 50001-up (1987-93) 45001 (1977-92) 45001-7384 (1984-90)

190.0 190.0 190.0 190.0 180.0 165.0 165.0 165.0 155.0

15.8-23.7 15.5-23.2 15.5-23.2 15.5-23.2 18.5-25 15.5-23.3

4,436 3,200 2,931 3,009 2,741 2,568 2,191 1,806 1,839

5,545 4,000 3,664 3,761 3,427 3,233 2,739 2,257 2,299

720,850 519,948 476,333 488,917 445,445 420,277 356,070 293,436 298,870

OPERATED DRY

OPERATED HOUR

BARE MONTH

2,057 2,075 1,974 1,910 1,884 1,984 1,532 1,473 1,424 1,301 1,079 2,167 2,059 1,284 1,115 1,582 1,519 1,493 1,019 971 813 874

2,571 2,594 2,467 2,387 2,355 2,479 1,915 1,841 1,780 1,626 1,349 2,709 2,574 1,605 1,394 1,977 1,899 1,867 1,274 1,213 1,016 1,093

334,191 337,194 320,749 310,310 306,163 322,322 248,963 239,382 231,374 211,354 175,370 352,170 334,620 208,637 181,181 257,010 246,870 242,671 165,594 157,729 132,080 142,090

4,333 5,014 5,280

5,416 6,268 6,600

704,080 814,814 858,000

OPERATED DRY

OPERATED HOUR

BARE MONTH

5,898 4,286 3,273

7,372 5,357 4,091

958,386 696,410 531,817

8,292 6,535 1,596 6,396 5,984 4,291 7,892 4,205 3,708

10,365 8,169 1,995 7,961 7,480 5,364 9,865 5,256 4,635

1,347,489 1,061,918 259,402 1,034,891 972,400 697,268 1,282,450 683,254 602,602

485.0 454.0

9,168 6,722

11,460 8,403

1,489,800 1,092,377

473.0

3,994

4,993

649,077

15.5-24.5

*Current Models



D60P-8 D60A-11 D53P-17 D53-A 17 D50A-17 D41P-6C D41P-6 D41E-6 D41P-3 D41A-3 D40P-5 * D39PX-21 * D37EX-21 D37P-5 D37E-5 * D31PX-21 * D31EX-21 D31P -20 D31E-20 D31P -18 * D21P-8 * D21A-8

45001-374 (1984-90) (1987-91) 80001-3010 (1984-90) 80001-1815 (1984-91) 80001-1830 (1984-1991) 20001-up (1995-up) BB20002-292 (1995-96) 20001-up (1995-up) 6001-7656 (1981-1990) 6001-7946 (1981-1990) 10011-up (1996-up) 1505-up (2001) 5001-5944 (2002-08) 3001-up (1992-93) 1002-3729 (1987-96) 50002-548 (2002-08) 2005 42000-up (1992-up) 45001-up (1992-up) 40001-44644 (1986-98) 83182-90001 (2008) 83121-84024 (2004-08)

* PR724 PR732B * PR734

2006 2006

FLYWHEEL HORSEPOWER 1.1.5 KOMATSU (Cont.) 165.0 155.0 124.0 124.0 120.0 110.0 105.0 110.0 90.0 90.0 70.0 95.0 95.0 80.0 80.0 75.0 75.0 70.0 70.0 70.0 40.0 40.0 1.1.6 LIEBHERR 160.0 180.0 200.0


11.5-17.5 11-17 9.6-14.4 9.6-14.4

8.2-12.2 7.0-10.4 8.5-12 8.5-12 6.8-10.2 6.8-10.2 7.5-10 7.5-10 3.9-5.6 3.9-5.6

*Current Models



PR742B D800 PS D750 834B PS 834B PS 830M 824G 824C PS 824C * 814F II 814F 814B

7BR (1996-97) 92Z (1982-96) 41E1 4SN (1996-02) (1979-1993) 85X (1978-95) 2006 BGF (2003-06) 00103-373, 162 (1981-95)

KOMATSU WD600-3 WD600-1 CLARK MICHIGAN 380A TCM

50003-up (2001-up) 10001-up (1992-up)

FLYWHEEL HORSEPOWER 1.1.6 LIEBHERR (Cont.) 234.0 350.0 260.0 1.2.1 CATERPILLAR 450.0 450.0 310.0 315.0 315.0 315.0 240.0 240.0 210.0 1.2.2 OTHER MAKES


10.5-12.0 10.5-12.0 7.5-8.5 10.0-11.5 10.0-11.5 26.0-30.0 26.0-30.0 26.0-30.0

*Current Models

1.0 EARTHMOVING EQUIPMENT (Cont.) 1.3 LOADERS, WHEEL TYPE MODEL


CAPACITY CU.M.

CU.YD.

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR/HR)

OPERATED DRY

OPERATED HOUR

BARE MONTH

992G 992D 990 II * 988H 988F II 988B II 988B I * 980H 980G 980F 980C * 972H 972G 970F * 966H 966F II 966F 966E * 962H 960F * 950H 950G 950F 950F 950E * 938G II 938G

9YF (1990-98) 7MJ (1992-97) 7HK (1993-96) BXY (2005-08) 2ZR (1995-97) 50W09970 (1990-93) 50W0001-09969 (1976-89) JMS (2004-08) 2SR (1996-03) 8CJ (1991-95) 63X (1979-98) A7D, A7J (2004-08) AWP (2002-06) 7PL, 7SK, 9JK (1993-99) AGJ (1991-06) 1SL (1993-99) 4YG1 (1990-93) 35S (1987-91) JGJ (2007-06) 1YM, 4CL, 6XL, 9ZJ (1993-98) J5J (2007-08) 3JW (1998-03) 4DJ (1993-98) 7ZF (1990-94) 65R (1987-91) B9Y (2003-08) 4YS (1997-03)

1.3.1 ARTICULATED STEERING 1.3.1.1 CATERPILLAR 11.50 15.00 9.60 12.50 8.40 11.00 6.65 8.70 6.10 8.00 6.31 8.25 6.31 8.25 4.95 6.50 5.70 7.50 4.20 5.50 4.20 5.50 4.20 5.50 4.70 6.00 4.70 6.00 3.80 5.00 3.80 5.00 3.80 5.00 3.44 4.50 3.52 4.25 3.50 4.50 3.25 4.25 3.00 3.10 4.00 3.10 4.00 2.68 3.50 2.65 3.50 2.80 3.65

800.0 690.0 625.0 501.0 430.0 375.0 375.0 318.0 300.0 270.0 270.0 287.0 265.0 250.0 262.0 220.0 216.0 216.0 211.0 200.0 197.0 183.0 170.0 160.0 160.0 180.0 160.0

83.0-91.0 61.5-68.0 45.3-50.7 44.0-49.0 44.0-49.0 25.5-30.5 30.0-36.0

21.0-25.5 25.0-30.0 23.0-28.0 23.0-28.0

18.0-22.0

13.0-17.0

16,071 11,577 11,759 11,036 7,404 5,564 3,838 6,795 4,825 3,173 2,387 5,562 4,389 3,714 4,878 3,513 2,353 1,910 4,209 2,713 4,095 3,326 2,762 1,855 1,470 3,087 2,470

20,089 14,472 14,698 13,795 9,255 6,955 4,797 8,494 6,031 3,967 2,983 6,952 5,486 4,643 6,097 4,391 2,941 2,387 5,261 3,391 5,119 4,157 3,453 2,319 1,838 3,859 3,088

2,611,609 1,881,308 1,910,766 1,793,350 1,203,202 904,189 6,232,623 1,104,220 784,069 515,658 387,816 903,760 713,141 603,603 792,610 570,856 382,382 310,310 683,930 440,869 665,470 540,397 448,877 301,444 238,953 501,670 401,401

OPERATED DRY

OPERATED HOUR

BARE MONTH

1,509 1,097 3,331 2,862 2,209 1,258 2,445 1,959 1,063 733 1,955 975 1,397 1,216 986

1,887 1,372 4,164 3,578 2,761 1,572 3,056 2,449 1,329 916 2,444 1,219 1,746 1,520 1,233

245,245 178,321 541,320 465,140 358,930 204,347 397,280 318,318 172,744 119,119 317,720 158,444 226,980 197,600 160,290

3,569 2,115 2,786 1,765 2,289 1,547 2,023 1,102 1,612

4,461 2,643 3,483 2,207 2,861 1,934 2,529 1,377 2,015

579,930 343,629 452,790 286,858 371,930 251,394 328,770 179,036 261,950

OPERATED DRY

OPERATED HOUR

BARE MONTH

6,777 5,852 3,652 4,933 2,944

8,471 7,315 4,565 6,166 3,681

1,101,243 950,950 593,450 801,580 478,478

*Current Models

1.0 EARTHMOVING EQUIPMENT (Cont.) 1.3 LOADERS, WHEEL TYPE (Cont.) 1.3.1 ARTICULATED STEERING (Cont.) MODEL


936F 936E * 930G * 928Gz 928G 926E * 924Gz 924F 918F 916 * 914G 910E * 908 * 906 * 904B

8AJ (1992-95) 33Z (1987-92) TWR (2004-07) WLG (2002-08) 7SR, 6XR (1996-03) 8NB, 94Z (1996-03) WGX (2003-08) 5NN (1994-01) 3TJ (1991-95) 2XB (1986-92) 7ZM 9WM, PDF (1996-04) 1SF (1989-95) LMD (2006) SDH (2006) B4L (2006)

* MEGA 400-V MEGA 400 * MEGA 300-V MEGA 300 * MEGA 250-V MEGA 250 * MEGA 200-V MEGA 200 * MEGA 160-V

1001-3329 (2006-06) 00001-251 (1992-96) 1001-3399 (2002-06) (1992-96) 2006 01001-1279 (1998-00) (2002-06) 00001-299 (1994-96) (2002-06)

CAPACITY CU.M. CU.YD. 1.3.1.1 CATERPILLAR (Cont.) 2.29 3.00 2.29 3.00 2.29 3.00 2.15 2.80 2.00 2.60 1.91 2.50 1.90 2.45 1.70 2.25 1.53 2.00 1.53 2.00 1.40 1.80 1.30 1.70 1.00 1.30 0.80 1.04 0.60 0.78 1.3.1.2 DAEWOO 3.90 5.10 3.90 5.10 2.90 3.77 2.90 3.77 2.50 3.25 2.40 3.10 1.80 2.35 1.80 2.35 1.50 1.95

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR/HR) 135.0 135.0 149.0 143.0 125.0 110.0 129.0 105.0 98.0 85.0 95.0 78.0 76.0 68.0 52.0

11.0-15.0

9.5-12.0

8.0-10.5 7.0-9.0 5.0-7.0

263.0 263.0 209.0 205.0 163.0 170.0 143.0 138.0 99.0

*Current Models



CAPACITY CU.M.

CU.YD.


1.3.1.3 DRESSTA 570C * 560C 506B * 555C 555

4001-5023 (1980-98) P010851-18004 (1997-05) P000601-14587 (1988-96) PD55502 (2005) 248-3947 (1988-95)

9.18 5.70 5.70 4.20 4.23

12.00 7.50 7.46 5.50 5.50

590.0 415.0 415.0 315.0 300.0

5 4 3 2 11

540 * 534C 530C 530 520E 520C 520B * 515G 515E 515C 510C 510B 507 500

3001-3060 (1979-01) 2006 4487-691 (1990-94) 1001-4706 (1977-92) P083005-503 (2001-05) P010501-83009 (1990-01) 501-7511 (1981-91) (2006-08) P093001-502 (2002-05) P006519-93504 (1990-05) P004526-636 (1990-03) 501-2383 (1981-90)

3.25 3.40 2.30 2.12 2.00 1.92 1.73 1.62 1.43 1.45 1.06 1.05 0.80 0.57

4.25 4.45 3.00 2.75 2.62 2.50 2.25 2.12 1.87 1.88 1.38 1.37 1.05 0.75

205.0 204.0 165.0 155.0 142.0 144.0 120.0 120.0 120.0 110.0 93.0 80.0 48.0 37.0

2,171 4,000 1,624 1,484 2,043 1,056 1,054 2,266 1,704 906 763 737 425 451

2,714 5,000 2,031 1,855 2,554 1,320 1,318 2,832 2,130 1,133 954 922 531 564

352,781 650,000 263,978 241,098 332,046 171,600 171,314 368,160 276,848 147,290 123,981 119,834 69,069 73,359

5.00 4.60 3.70 2.60 2.20 1.75

310.0 230.0 180.0 140.0 110.0 90.0

989 1,962 1,491 1,115 891 744

1,236 2,453 1,863 1,394 1,114 931

160,732 318,890 242,242 181,181 144,859 120,976

OPERATED DRY

OPERATED HOUR

BARE MONTH

148.0 100.0 80.0 43.0

1,259 802 730 387

1,574 1,002 912 484

204,663 130,273 118,547 62,920

240.0 170.0 145.0 130.0 110.0 85.0

3,154 2,192 2,123 1,488 1,386 1,183

3,942 2,740 2,654 1,860 1,733 1,478

512,512 356,213 345,059 241,813 225,225 192,192

335.00 280.00 270.00 215.00 215.00 173.00 148.00 140.0 125.0

5,050 3,992 2,497 2,064 3,091 2,472 1,769 2,078 1,945

6,313 4,990 3,122 2,580 3,864 3,090 2,211 2,598 2,431

820,690 648,700 405,834 335,335 502,320 401,700 287,430 337,740 316,030

2,731 2,382 2,057

3,413 2,978 2,572

443,729 387,101 334,334

OPERATED DRY

OPERATED HOUR

BARE MONTH

1,863 1,563 1,369 1,352 1,777 1,290 1,979 1,229

2,329 1,954 1,712 1,690 2,221 1,613 2,474 1,536

302,731 253,968 222,508 219,648 288,730 209,690 321,620 199,680

15,134 12,814 11,774 14,014

18,917 16,017 14,718 17,518

2,459,210 2,082,210 1,913,340 2,277,340

1.3.1.4 FIAT - ALLIS TL-40D FR20B FR-15B FR12B FR10B FR-9

501101-10889 (1986-92) 590110-6033 (1986-92) 560110-1693 (1986-92) 610150-1765 (1986-92) 620100-401 (1986-93)

3.82 3.52 2.83 1.98 1.68 1.34

*Current Models


FL230 FL170A FL120A FL70A


1001, 1174, 2822 (1982-90)

LX230 LX150-2 LX120-3 LX100-3 LX80-2C LX70-2C

CAPACITY CU.M. 2.29 1.68 1.30 0.69 3.40 3.00 2.50 1.90 1.50 1.30

* HL780-7 * HL770-7 HL770 HL760 * HL760-7 * HL757-7 HL750 * HL740-7 * HL730-7

410001-100 (2006-07) 110066-410149 (2004-07) (1999-03) (1995-01) 110150-410199 (2004-07) 11001-999 (2004-07) 00060-11220 (1996-00) 110166-1999 (2004-07 (2004-07)

5.10 4.00 4.00 3.20 3.00 2.50 2.10 2.10 1.80

90Z IV-2 85Z IV-2 80Z IV-2

(1995-01) (1996-99) 80C35300-725 (1997-99)

4.00 3.40 3.20

CU.YD. 1.3.2.5 FURUKAWA 3.00 2.20 1.70 0.90 1.3.1.6 HITACHI 4.42 4.00 3.25 2.47 1.95 1.70 1.3.1.7 HYUDAI 6.70 5.20 5.20 4.16 4.00 3.25 2.73 2.73 2.40 1.3.1.8 KAWASAKI 5.23 4.45 4.18


272.00 228.00 185.00

20.0 20.0 16.0

*Current Models


70Z IV-2 65Z IV-2 65 IV-2 60Z IV-2 50Z IV-2 60Z IV 80Z III 60Z III


CAPACITY CU.M.

CU.YD. 1.3.1.8 KAWASAKI (Cont.) 2.70 3.53 1.90 2.49

70C35500-6999 (1998-01) 65C35500-999 (1998-01) 65J2110365-1251 60C20001-299 (2001-02) 60C20001-299 (1996-97) 60C10001-999 (1995-99) 5372-5398 (1992) 60J1-0121-640- (1992)

1.50 1.30 1.50 3.06 1.38

2008 A050026-60042 (2005-08) (1994-04) 2008

13.00 13.00 13.00 12.30

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR/HR) 13.0 9.6

1.96 1.70 1.96 4.00 1.80

170.0 118.0 104.0 108.0 92.0 94.0 165.0 94.0

17.00 17.00 17.00 16.10

853.0 853.0 828.0 808.0

65.1-82.1 65.1-82.1

9.6

1.3.1.9 KOMATSU * WA900-3A * WA900-3A WA900-1 * WA800-3A

62.5-78.9

* WA800-3 WA800-2 * WA700-3A * WA700-3 WA700-1 WA600-3 WA600-1 WA500-3 WA500-1 * WA480-3 WA470-5 WA470-3 WA450-1 * WA430-5

A050020-70013 (2002-04) (1987-99) 2008 50011-51095 (1999-07) 10001-10085 (1990-95) 50363-52831 (2002-04) 10001-up (1987-95) A70001-A072509 (1997-06) 10001-UP (1985-97) (2002-09) H050519-1119 (2004-06) (1993-03) (1984-95) (2005-06)

12.30 10.50 12.30 12.30 8.50 11.00 5.40 5.00 4.40 4.60 4.20 5.20 4.20 3.70

16.10 13.75 16.10 16.10 11.15 14.40 7.00 6.50 5.75 6.00 5.50 6.80 5.50 4.80

808.0 789.0 808.0 808.0 641.0 478.0 415.0 315.0 291.0 271.0 261.0 260.0 217.0 217.0

62.5-78.9 73-80 53.9-68 53.9-68 61-69 38.7-48.9 44-53 29.2-36-8 30-38 22.7-28.6 18.3-23.0 22.5-28.4 19.1-24.2

10,566 10,226 12,298 10,350 7,669 6,291 3,714 3,458 2,648 6,768 4,024 2,892 2,059 3,665

13,208 12,783 15,372 12,937 9,587 7,864 4,642 4,323 3,310 8,460 5,030 3,615 2,574 4,581

1,717,040 1,661,803 1,998,360 1,681,810 1,246,245 1,022,307 603,460 561,990 430,287 1,099,800 653,939 469,898 334,620 595,530

OPERATED DRY

OPERATED HOUR

BARE MONTH

3,530 2,460 2,275 2,198 2,509 2,049 1,632 2,652 1,675 1,294 2,266 1,345 1,119 2,040 1,742 1,258 1,658 930 1,581 792 973 707 746 568 528

4,413 3,075 2,844 2,747 3,136 2,561 2,039 2,093 1,617 2,832 1,681 1,399 2,550 2,177 1,573 2,073 1,163 1,976 990 1,217 883 933 711 660

OPERATED DRY

OPERATED HOUR

BARE MONTH

*Current Models


* WA420-5 WA420-3A WA420-3 WA400-1 WA380-5 WA380-3 WA380-1 * WA320-5 WA320-3 WA320-1 * WA250-5 WA250-3 WA250-1 * WA200-5 * WA180-5 WA180-3 WA180-3 WA180-1 * WA150-5 WA150-1 WA120-3 WA100-1 * WA50-3 WA30-5 WA20-2

SERIAL NO./ SERIES (YR.MFG.) (2004-06) W055-53004 (2002-04) (1997-02) 20001-up (1988-92) 60095-2166 (2002-07) 26270 (1996-02) 10001-53154 (1987-99) 60004-61760 (200-07) (1995-02) (1987-95) 70038-72725 (2003-08) A75001-A78243 (1997-03) 10330-66130 (1987-97) 65032-70397 (2004-07) (2004-07) 10001-30600 (1997-03) 50346-4192 (1997-04) 1000-A76489 (1987-97) 65063-7519 (2004-07 (1987-91) 54016-2226 (2000-04) 10001-34180 (1988-90) 21422-2640 (2000-08) 2001

CAPACITY CU.M. 3.85 3.65 3.85 3.13 3.30 3.30 2.87 2.80 2.65 2.29 2.30 2.25 1.91 1.80

CU.YD. 1.3.1.9 KOMATSU (Cont.) 5.05 4.78 5.05 4.10 4.33 4.33 3.75 3.70 3.48 3.00 3.00 2.95 2.50 2.40

1.68 1.85 1.60 1.50 1.22 1.45 1.22 0.60 0.40 0.25

2.20 2.45 2.10 2.00 1.60 1.90 1.60 0.78 0.52 0.33

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR/HR) 217.0 217.0 217.0 197.0 187.0 187.0 180.0 166.0 153.0 150.0 135.0 132.0 130.0 123.0 110.0 108.0 110.0 110.0 96.0 94.0 85.0 73.0 37.0 29.0 21.7

19.6-24.7 14.2-17.8 15.5-19.60 20-24 12.5-15.7 17-22 16.5-20.5 9.8-12.0 12-16 14.50-18.5 9.6-12.0

10-13 13-16 7.3-9.1 7.5-9.5 7.5-10.5 7.3-9.1

573,690 399,750 369,655 357,110 407,693 332,904 265,122 430,950 272,129 210,210 368,160 218,504 181,896 331,500 283,010 204,490 269,490 151,151 256,880 128,700 158,158 114,829 121,290 92,378 85,800

*Current Models



CAPACITY CU.M.

CU.YD.


1.3.1.10 SAMSUNG SL 250-2 SL 180-2 SL 150-2 SL 120-2

PBY0157, PCY0872 (1996-00) NBY0020-NDY0507 (1992-96) MBY0065-MYC0519 (1992-95) LBY0019-0776 (1995-00)

3.70 2.80 2.30 1.70

870-2 860-2 850-2 835-2

67200001-277 (1985-91) 6620001-400117 (1985-91) 65200001-400116 (1985-91) 64300001-1029 (1986-92)

3.50 2.70 2.30 1.90

1061 (2008-up) 62006-62355 (2003-07) 60002-428 (1995-00) 6081-6102 (2007-up) 2197-4503 (2003-07) 11088 (2007-up) 62544-8636 (2003-07) L180CV60301-366 (1995-00) 13161-64 (2007-up) 6005-10654, 62658-4151 (2003-07)

6.90 6.80 6.60 5.40 5.60 4.60 4.40 4.40 4.20 3.80

4.80 3.66 3.01 2.20

256.0 203.0 165.0 116.0

2,524 2,015 1,882 1,467

3,155 2,519 2,353 1,834

410,124 327,470 305,877 238,381

4.58 3.53 3.01 2.30

237.0 178.0 158.0 125.0

1,692 1,355 1,200 1,573

2,115 1,694 1,500 1,966

274,989 220,220 195,052 255,580

9.02 8.50 8.50 7.06 7.30 6.00 5.70 5.70 5.49 4.98

535.0 502.0 503.0 362.0 351.0 318.0 300.0 284.0 284.0 269.0

11,902 9,153 5,128 6,860 4,323 5,675 4,983 4,200 5,174 4,278

14,878 11,441 6,410 8,575 5,403 7,094 6,229 5,250 6,467 5,347

1,934,140 1,487,330 8,332,261 1,114,750 702,416 922,220 809,770 682,539 840,710 695,110

1.3.1.11 TCM/CLARK

1.3.1.12 VOLVO * L350F * L330E L330C * L220F L220E * L180F * L180E L180C * L150F * L150E

35.0

23.0 20.0

18.0

L150C * L120F L120E L120C * L110F

60501-1786, 2081-4843 (1995-00) 23355 (2008-up) 63292-6132 (2003-07) 61301-2542 (1995-00) 3648 (2007-up)

3.50 3.30 3.30 3.00 3.10

4.50 4.32 4.00 4.00 4.05

257.0 245.0 223.0 208.0 230.0

14.0

3,160 4,267 3,699 2,662 4,010

3,950 5,334 4,623 3,328 5,012

513,513 693,420 601,050 432,575 651,560

OPERATED DRY

OPERATED HOUR

BARE MONTH

3,504 3,266 2,959 2,436 2,316 3,117 2,923 2,726 2,117 2,859 2,531 2,242 2,193 1,680 1,588 1,457

4,380 4,083 3,699 3,045 2,895 3,896 3,654 3,408 2,647 3,574 3,164 2,803 2,741 2,100 1,984 1,822

569,400 530,790 480,870 395,824 376,376 506,480 475,020 443,040 344,058 464,620 411,320 364,390 356,330 272,987 257,972 236,808

5,722 3,088 3,329 4,354

7,153 3,860 4,161 5,443

930 501,787 540,969 707,590

OPERATED DRY

OPERATED HOUR

BARE MONTH

2,345 2,638 1,907 1,173 1,552 1,096 1,230 1,325 897 965

2,932 3,298 2,384 1,466 1,940 1,370 1,538 1,657 1,121 1,207

381,095 428,714 309,881 190,619 252,252 178,035 199,914 215,358 145,717 156,871

2,360 1,151 1,761 1,309 1,663 1,087 700 794

2,950 1,439 2,201 1,637 2,079 1,359 876 992

383,526 187,044 286,143 212,784 270,270 176,605 113,828 128,986

*Current Models


* L110E * L90F * L90E L90D L90C * L70F * L70E * L70D L70C * L60F * L60E * L50F * L50E L50D L50C L50B


CAPACITY CU.M.

1929-61180 (2003-07) 25666 (2007-up) 65035-67747 (2003-07) 63529-5034 (2000-03) L090CJ61901-3649 (1995-00) 24372 (2008) 1-61453, 21003-71282 (2003-08) I7005-19997 (2000-03) 11246-16472 (1995-00) 4535 (2008-up) 60113-153 USA (2003-07) (2007-up) 71805 (2003-07) 13005-14049 (2000-03) 10006-12467 (1995-00) 1951950-2124 (2007-08)

3.00 2.70 2.70 7.00 2.50 2.30 2.30 2.00 1.80 2.00 2.10 1.50 1.50 3.90 1.40 1.50

26Z (1981-2000) 9BL (1995-99) 2DS (1999-03)

3.20 3.21 2.45 2.45

CU.YD. 1.3.1.12 VOLVO (Cont.) 4.00 3.53 3.53 9.16 3.25 3.00 3.01 2.62 2.34 2.62 2.75 1.96 1.96 5.10 1.82 1.96

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR/HR) 209.0 175.0 165.0 153.0 160.0 170.0 152.0 130.0 130.0 155.0 139.0 101.0 101.0 101.0 101.0 99.0

12.0

242.0 210.0 160.0 160.0

33.5-40.7 28.0-34.0 21.0-25.0 19.0-23.0

9.0

7.0

7.0

5.0

1.4 LOADERS, CRAWLER 1.4.1 CATERPILLAR * 973C 973 LGP 963B * 963C

4.19 4.20 3.20 3.20

*Current Models

1.0 EARTHMOVING EQUIPMENT (Cont.) 1.3 LOADERS, CRAWLER (Cont.) MODEL

963 LGP 953C 953 LGP 943 939C HST 935C II 933C HST 933C HST LGP 931C II 931C LGP II

SERIAL NO./ SERIES (YR.MFG.) 21Z, 48Z, 11Z (1982-95) 2ZN (1995-97) 44Z,20Z (1981-95) 19Z (1980-92) SDJ (1990-93) 1997 1997 9AG (1990-03) 6FR1 (1990-03)

D75S-5 D75S-3 D65S-8 D60S-8 D57S-1 D41S-3 D31S-20 D31S-18

15001-up (1994-up) 7001-16259 (1979-1991) 45102-45356 (1984-93) 45005-45176 (1984-91) 6501-20027 (1977-91) 6001-6975 (1981-90) 41001 (1992) 40001-40561 (1986-92)

CAPACITY CU.M. CU.YD. 1.4.1 CATERPILLAR (Cont.) 2.22 2.90 1.83 2.42 1.76 2.30 1.30 1.70 1.20 1.57 0.99 1.30 0.83 1.08 0.83 1.08 0.83 1.08 0.83 1.08 1.4.2 KOMATSU 2.22 2.90 2.20 2.88 1.83 2.40 1.83 2.40 1.80 2.35 1.20 1.57 0.99 1.30 0.99 1.30

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR/HR) 150.0 128.0 110.0 80.0 90.0 80.0 70.0 70.0 70.0 67.0

19.0-23.0 16.0-21.0 16.0-21.0 13.0-15.0 7.5-11.0 11.0-13.0 11.0-13.0 7.5-11.0 7.5-11.0

200.0 200.0 160.0 160.0 135.0 90.0 70.0 70.0

24-29

OPERATED DRY

OPERATED HOUR

BARE MONTH

463 540 659

579 675 823

75,212 87,770 107,016

OPERATED HOUR

BARE MONTH

1.5 LOADERS, SKID STEER MODEL ALL MODELS Diesel Driven Pneumatic Tire

CAPACITY TIPPING LOAD (lbs)

FLYWHEEL HORSEPOWER

800 1000 1300

20-25 27-30 36-40

CAPACITY TIPPING LOAD (lbs)

FLYWHEEL HORSEPOWER


1.0 EARTHMOVING EQUIPMENT (Cont.) 1.5 LOADERS, SKID STEER (Cont.) MODEL

OPERATED DRY

LOAD (lbs) ALL MODELS (Cont.)

1350 38-43 1450 40-43 Diesel Driven 1550 43-49 Peumatic Tire 1700 50-56 1750 58-62 2100 65-75 2300 68-75 3700 82-90 4000 90-94 Note: Valid for Skid Steer Manufactured 1998-up. Applicable for U.S. and European Makes.

DRY

HOUR

688 729 779 869 916 1,049 1,093 1,346 1,795

860 911 973 1,087 1,146 1,311 1,366 1,682 2,244

111,794 118,482 126,536 141,278 148,922 170,489 177,587 218,673 291,701

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

106.0 107.0 76.0 76.0 90.0 90.0 90.0 48.0 48.0 40.0 33.0 33.0 29.0 29.0

1,652 1,663 1,539 1,450 1,513 1,391 1,461 1,259 1,148 1,212 989 902 1,042 1,016

2,065 2,079 1,924 1,813 1,891 1,739 1,826 1,574 1,434 1,515 1,236 1,128 1,302 1,271

268,411 270,270 250,107 235,664 245,817 226,083 237,380 204,633 186,472 196,911 160,732 146,575 169,312 165,165

OPERATED DRY

OPERATED HOUR

BARE MONTH

737 757 802 663 562 530 496 365

921 946 1,002 828 703 662 620 457

119,691 122,980 130,273 107,679 91,377 86,086 80,652 59,345

OPERATED DRY

OPERATED HOUR

BARE MONTH

1.6 DUMPERS CAPACITY

MODEL THWAITES (Alldrive) 7 tonne/powershift/front dip 6 tonne/powerswivel 6 tonne/powershuttle/power swivel 6 tonne/powershift/front tip 6 tonne/front tip 5 tonne/front tip 5 tonne/powershuttle/power swivel 4 tonne/powershuttle/power swivel 4 tonne/front tip 8000/power swivel 7000/power swivel 7000/front tip 5000H/Hi-Swivel 5000H/power swivel

CU.M.

CU.YD.

3.64 3.15 3.15 3.15 3.15 3.00 3.00 2.50 2.50 2.00 1.82 1.82 1.40 1.40

4.76 4.12 4.12 4.12 4.12 3.92 3.92 3.27 3.27 2.62 2.38 2.38 1.83 1.83

1.0 EARTHMOVING EQUIPMENT (Cont.) 1.6 DUMPERS (Cont.)

THWAITES (Alldrive) (Cont.) 4000/high discharge 4000/swivel skip 4000/front tip 4000/front tip Orline 2500/powerswivel Orline 2500/swivel skip Orline 2500/front tip Nimline 2000/front tip 1.7 SCRAPERS, MOTORIZED MODEL

* 657G 657E/TANDEM POWERED PUSH-PULL 651E * 637G 637E/TANDEM POWERED PUSH-PULL * 631G 631E 631E * 627G 627F 627E


CAPACITY

MODEL CU.M.

CU.YD.

1.05 1.05 1.05 1.05 0.75 0.75 0.75 0.78

1.37 1.37 1.37 1.37 0.98 0.98 0.98 1.02


23.0 23.0 23.0 23.0 13.0 13.0 13.0 8.0 CAPACITY

CU.M.

CU.YD. 1.7.1 CATERPILLAR 44.0


A4G, W1C (2006-08)

33.60

15,263

19,079

2,480,270

AXT, CEH, DFJ (2006)

32.00 32.00 26.00

44.0 44.0 34.0

550.0 550.0 462.0

116.0-12.5 68.0-79.0 87.0-93.0

15,581 13,018 12,169

19,477 16,272 15,211

2,531,958 2,115,399 1,977,430

21.00 26.00 21.00 21.00 17.00

31.0 34.0 31.0 31.0 22.00

450.0 462.0 490.0 450.0 330.0

87.0-93.0 53.0-59.0

14.00

20.00

225.0

10,967 10,517 9,031 6,655 7,777 8,456 6,599

13,709 13,146 11,288 8,318 9,721 10,570 8,249

1,782,209 1,708,980 1,467,466 1,081,366 1,263,730 1,374,087 1,072,357

OPERATED DRY

OPERATED HOUR

BARE MONTH

7,428 4,648 7,002 4,284 5,834

9,285 5,810 8,753 5,355 7,292

1,207,050 755,326 1,137,890 696,124 947,947

AWK, CLR, DFA (2006) 1AB (1985-91) 89M AXF, CEX, DBD (2006) IDL00442/43 (1993-00) 7CG (1990-93)

564.0

53.0-59.0 64.0-76.0 64.0-70.0 57.0-62.0

*Current Models

1.0 EARTHMOVING EQUIPMENT (Cont.) 1.7 SCRAPERS, MOTORIZED (Cont.) MODEL

* 623G 623F * 621G 621F 621E

SERIAL NO./ SERIES (YR.MFG.) ARW, CES, DBC (2006) 6BK (1993-98) ALP, CEN, DBB (2000-06) 4SK (1993-2000) 6AB, 2PD (1986-93)

CAPACITY CU.M. CU.YD. 1.7.1 CATERPILLAR (Cont.) 17.50 23.00 17.00

22.00

17.00

22.00

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR/HR) 330.0 330.0 220.0 330.0

40.0-46.0 40.0-46.0 38.0-44.0 38.0-44.0

621E 615C 613C 613C * 613C SERIES II

6AB, 2PD (1986-93) 92X00425-2424 (1987-93) (1984-93) 92X797 2006

17.00 12.00 8.40 8.40 8.40

22.00 16.00 11.00 11.00 11.00

330.0 265.0 175.0 175.0 175.0

24.00 43.00 34.00 32.00 32.00 32.00 32.00 24.00

38.0-44.0 30.0-36.0 21.0-25.0

4,309 4,596 3,084 2,257 3,813

5,387 5,745 3,854 2,822 4,766

700,271 746,889 501,072 366,795 619,580

450.0

5,672

7,090

921,635

808.0 717.0 605.0 659.0 605.0 524.0 520.0

5,718 7,991 2,446 2,373 1,847 2,040 3,722

7,148 9,989 3,057 2,967 2,309 2,550 4,652

929,214 1,298,583 397,397 385,671 300,157 331,474 604,747

3,725.70 3,723.50

484,341.00 484,055.00

21.0-25.0

1.7.2 KOMATSU WS23S-2 / SINGLE ENGINE

(1990)

18.36 1.7.3 TEREX

TS-32 / 47 LOT-80SH / TWIN ENGINE TS-24B / TWIN ENGINE TS-24 / 43 LOT-78SH / TWIN ENGINE TS-24 / 39 LOT-33SH / TWIN ENGINE TS-24 / 39 LOT-56SH / TWIN ENGINE TS-24 / 31 LOT-56SH / TWIN ENGINE TS-18 / TOT 29 & 33 1.8 GRADERS, MOTORIZED

32.00 24.00 24.00 24.00 24.00 24.00 18.36 1.8.1 CATERPILLAR 6WM, 9EJ, 9JM, ASD (1996-up) 5HM (1998-up)

160H 140H

180.0 150.0

17.0-25.0 15.0-19.0

2,980.56 2,978.80


OPERATED DRY

OPERATED HOUR

BARE MONTH

19.0-23.0 13.0-17.0 15.0-19.0 13.0-17.0 15.0-17.0 15.0-19.0 29.1-37.9 25.0-32.0 26.0-32.0 21.0-26.0 21.0-26.0 13.0--19.0 15.0-19.0

1,704 2,614 1,576 2,446 1,518 1,049 8,449 6,643 5,021 4,908 3,037 3,218 1,957

2,130 3,267 1,970 3,057 1,898 1,311 10,561 8,304 6,277 6,135 3,796 4,023 2,446

276,848 424,710 256,113 397,397 246,657 170,456 1,372,930 1,079,507 815,958 797,511 49,349 522,951 318,032

3,430 2,905 2,379 2,211 967 1,949

4,288 3,631 2,973 2,763 1,209 2,437

557,414 472,043 386,529 359,216 157,157 316,745

1,269 1,062

1,586 1,328

206,206 172,601

OPERATED DRY

OPERATED HOUR

BARE MONTH

1,696

2,120

275,561

1,426

1,783

231,803

3,372

4,215

547,976

4,521 2,796 2,187 1,017 4,715 4,622 1,325 857 843 1,630 1,538 1,377 1,442 3,604

5,651 3,495 2,734 1,272 5,894 5,777 1,657 1,071 1,054 2,037 1,923 1,722 1,803 4,505

734,591 454,311 355,355 165,308 766,220 751,010 215,358 139,282 136,994 264,836 249,964 223,795 234,377 585,650

*Current Models

1.0 EARTHMOVING EQUIPMENT (Cont.) 1.8 GRADERS, MOTORIZED ( Cont.) MODEL

140G 135H 130G 120H 120G 120B STRAIGHT FRAME * 16M 16H 16G 14H 14G 12H 12G 750A/ARTICULATED 740A / ARTICULATED 730A/ARTICULATED 720A/ARTICULATED 720A / ST. FRAME 710A/ARTICULATED FG75A FG75 & 100C

SERIAL NO./ SERIES (YR.MFG.) 72V (1973-1995) 8NM (1998-up) 74V (1992-1995) 5FM (1996-up) 87V (1992-1995) 32C, 64U, 7kb (1981-1991) B9H (2006) 6ZJ (1995-up) 93U (1973-95) 7WJ (1995-02) 96U (1992-95) 4XMD00420-3400 (1997-03) 6111111M (1992-1995)

1998 1998 1998 1998

FLYWHEEL HORSEPOWER 1.8.1 CATERPILLAR (Cont.) 150.0 135.0 135.0 125.0 125.0 125.0 297.0 275.0 275.0 220.0 200.00 140.0 135.0 1.8.2 CHAMPION 210.0 210.0 195.0 160.0 152.0 140.0 1.8.3 FIAT-ALLIS

43500101-80M01124 (1984-91) 61A0002-81U01015 (1982-91)

130.0 130.0


850 830 830 B GD825A-2 GD705A-4 GD705A-4 GD705R-2 * GD675-3A * GD655-3A GD655A-1 GD655R-1 GD650R-1 GD625A-1 GD623A-1 GD623R-1 GD611A-1 * GD555-3A

SERIAL NO./ SERIES (YR.MFG.) U00501-U202998 (1988-96) 100477-200735 U200643-U202967 (1988-97) 100485-200738 U202699-U211046 (1997-03) 10002-12417 (1987-08) 21228-up (1992-up) 11001-up (1984-up) (1987-93) 50010-51328 (2001-08) 11290-51687 (2001-08) (1983-91)

50001-up (1987-up) 30001-up (1995) (1992 up) 50001-51272 (2003-08)

FLYWHEEL HORSEPOWER


1.8.4 GALION 200.0 180.0 144.0 1.8.5 KOMATSU 280.0 200.0 200.0 178.0 200.0 190.0 165.0 165.0 165.0 155.0 155.0 155.0 155.0 160.0

24.50-33.7 16.8-23.1

15.6-21.4 13.9-19.1

15-20 15-20 12.6-17.4 11.8-16.3

GD525A-1 GD523R-1 GD523A-1 GD521A-1 GD511A-1 * GD511R-1

50003-60046, J60022 (1987-91) 1995 (1992-up) 1998

135.0 135.0 135.0 135.0 135.0 135.0

15-18

1,221 1,163 1,431 1,396 1,693 1,416

1,526 1,454 1,789 1,745 2,116 1,770

198,341 189,046 232,518 226,798 275,132 230,087


OPERATED DRY

OPERATED HOUR

BARE MONTH

10.8-14.8

1,326 742 1,859

1,658 927 2,323

215,501 120,549 302,016

1,426 969 835 784

1,782 1,211 1,044 980

231,660 157,443 135,707 127,413

5,462 4,660 3,990 3,707 3,481 3,351 2,430 4,080 2,263 3,483 1,941 3,131 1,738 1,742

6,828 5,825 4,987 4,634 4,351 4,189 3,037 5,100 2,829 4,354 2,427 3,914 2,173 2,178

887,640 757,250 648,310 602,420 565,630 544,544 394,823 663,000 367,796 566,020 315,458 508,820 282,425 283,140

OPERATED DRY

OPERATED HOUR

BARE MONTH

125.0 105.0 105.0 105.0

608 510 494 413

675 567 549 459

87,802 73,645 71,357 59,631

590.0 536.0 442.0 442.0 420.0 442.0 420.0 322.0 303.0 288.0

12,542 12,054 9,542 8,615 8,358 8,496 8,200 5,953 6,596 5,194

13,935 13,393 10,602 9,572 9,287 9,440 9,111 6,614 7,329 5,771

1,811,550 1,741,090 1,378,260 1,244,360 102,310 1,227,200 1,184,430 859,859 952,770 750,178

354.0 315.0 310.0 240.0 220.0

10,469 7,051 3,452 7,325 4,938

11,632 7,834 3,836 8,139 5,487

1,512,160 1,018,446 498,641 1,058,070 713,284

99.0 85.5

1,921 1,660

2,134 1,845

277,420 239,811

OPERATED DRY

OPERATED HOUR

13.0-18.5 11.6-16.0

*Current Models



GD510R-1 GD505R-2 GD305A-3

(1992-up)

MG530 MG500 MG400 MG330

1CA50332/1996/97 (1987-97) (1987-97) 3GA 00119 (1997)

1989

* G990 * G970 * G960 * G940 * G930 G780A G740A G730B G730A G720B G720A G710B G710A G80

(2006-up) (2006-up) (2006-up) (2006-up) (2006-up) (1999-03) (1999-03) (2003-06) (1999-03) (2003-06) (1999-03) 3542 (2003-06) (1999-03)

FLYWHEEL HORSEPOWER 1.8.5 KOMATSU (Cont.) 125.0 130.0 100.0 1.8.6 MITSUBISHI 180.00 174.00 150.00 135.00 1.8.7 VOLVO 245.00 230.00 215.00 195.00 175.00 210.00 210.00 209.00 195.00 189.00 160.00 163.00 140.00 85.00

10.0-14.0

15.1-26.4 13.1-24.6 12.4-21.90 11.2-19.6 26.3

19.4-24.6 17.3-21.9 15.4-19.6

*Current Models

2.0 COMPACTION EQUIPMENT 2.1 SELF-PROPELLED, STATIC MODEL


CAPACITY MT. TONS

FLYWHEEL HORSEPOWER

2.1.1 TWO AND THREE SMOOTH DRUM, STATIC 12.00-18.00 9.00-11.00 6.00-8.00 3.00-5.00 2.1.2 FOUR TAMPING FOOT WHEELS, STATIC

ALL MODELS

BOMAG * BC1172RB * BC972RB * BC772RS * BC772RB * BC772EB * BC672RB * BC672EB BC671RB * BC572RB BC571RB CATERPILLAR * 825H 825G 825C * 815F II 815F

2005 2005 2005 2005 2005 2005 2005

54.50 46.50 37.30 36.50 35.30 32.10 28.90

2005

28.60

2006 (1995-97) 86X1 (1979-96) 2006 (1996-97)

BOMAG * BW24 BW20R, 8 WHEELS

2001

32.73 31.00 29.00 20.76 20.00 2.1.3 PNUEMATIC TIRE ROLLER, STATIC 9.40 24.00

*Current Models

2.0 COMPACTION EQUIPMENT (Cont.) 2.1 SELF-PROPELLED, STATIC (Cont.) MODEL


CAPACITY MT. TONS

FUEL FLYWHEEL HORSEPOWER CONSUMPTION

BARE MONTH

HORSEPOWER CONSUMPTION (LTR/HR) 2.1.3 PNUEMATIC TIRE ROLLER, STATIC (Cont.)

SERIES (YR.MFG.) BOMAG (Cont.) BW16R, 8 WHEELS BW11R CATERPILLAR * PS300C PS200B PS150B * PS150C DYNAPAC CP271 CP221 CP141 HAMM * GRW10 INGERSOLL RAND PT125R VOLVO * PT240R * PT125R OTHER MAKES 7-WHL, 13.00 X 24, 18PR 11-WHL, 9.00 X 20, 12PR 13-WHL, 7.50 X 15, 4PR 11-WHL, 7.50 X 15, 4PR 9-WHL, 7.50 X 15, 4PR 9-WHL, 9.00 X 20, 4PR 4-WHL, 7.50 X 15, 4PR

DRY

HOUR

1,575 867

1,750 964

227,513 125,268

3,833 2,934 2,395 2,893

4,259 3,260 2,661 3,214

553,670 423,852 345,917 417,820

20.00 12.00

74.0 74.0

23.05 18.00 12.00 12.94

105.0 105.0 70.0 100.0

27.00 21.00 11.00

99.2 99.2 100.0

1,467 1,324 1,065

1,630 1,471 1,184

211,926 191,191 153,868

2006

8.80

115.0

1,771

1,968

255,840

6001-162000 (1993-00)

12.60

85.0

1,666

1,851

240,669

2008 2008

16.10 4.20

105.0 85.0

2,007 1,572

2,230 1,997

289,900 259,587

35.00 25.00 15.00 14.00 13.00 10.00 11.00

120.0 148.0 106.0 102.0 107.0 107.0 107.0

875 709 550 552 506 498 440

972 788 612 614 562 553 488

126,412 102,388 79,508 79,794 73,073 71,929 63,492

OPERATED DRY

OPERATED HOUR

BARE MONTH

2,444 2,052 1,804 2,279 2,330 2,102

2,716 2,280 2,004 2,532 25,889 2,336

353,080 296,439 260,546 329,160 336,570 303,680

1,919 2,129 3,194 2,303 2,000 2,347 1,639 2,403 1,889

3,243 2,366 3,594 2,559 2,222 2,608 1,822 2,670 2,099

421,590 307,593 461,370 332,618 288,860 339,040 236,808 347,100 272,844

2,472 2,157 1,926 1,915 1,876 1,723 1,604 1,827 1,750 1,763

2,747 2,397 2,140 2,127 2,085 1,914 1,782 2,030 1,954 1,959

357,071 311,597 278,135 276,562 270,985 248,820 231,660 263,856 252,802 254,712

OPERATED DRY

OPERATED HOUR

BARE MONTH

1,697 1,446 1,327

1,885 1,606 1,474

245,099 208,840 191,625

2006 5JR (1989-96) 3XR (1996-97) 2006

15.0-17.0

11.0-13.0

*Current Models

2.0 COMPACTION EQUIPMENT (Cont.) 2.2 SELF-PROPELLED, VIBRATORY, STEEL DRUM MODEL

BOMAG * BW212D-4 BW212D-3 BW212D-2 * BW211D-40 * BW211D-4 BW211D-3 CATERPILLAR * CS533E CS533C * CP533E CP533C CS531C * CS433E CS431C * CS323C CS323 DYNAPAC CA602D CA512D CA511D CA402D CA302D CA301D CA301 CA252D CA252 CA251D

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR/HR) 2.2.1 SINGLE SMOOTH DRUM VIBRATORY


CAPACITY MT. TONS

2005 (1996-2004) 2005 2005 2003

10.62 12.00 11.00 10.30 10.95 10.62

132.0 126.0 106.0 132.0 132.0

DAK00130-00632 (2003-08) 2XN00472/473 (1995-97) BZG00180-487, ASM (2004-08) 3XN (1995-00) 9RN (1995-97) ASR, BTT, CFP, DAC (2006) 9XL (1996-97) IEN, DAR (2006) 1TM (1985-95)

10.84 9.40 11.32 9.40 9.30 6.75 6.52 4.39 4.54

130.0 145.0 130.0 145.0 145.0 100.0 105.0 83.0 77.0

19.00 17.00 15.25 15.00 14.90 12.00 11.35 12.55 12.30 9.80

190.0 175.0 155.0 125.0 119.0 152.0 152.0 125.0 119.0 152.0

CAPACITY MT. TONS

FLYWHEEL HORSEPOWER

6922CN3403 (2005) 59010809-1194 (1995) (1998-up) 66220863-1002 (2000) 66221058 58313072-983 (1998)

11.0-13.0 11.0-13.0 17.0-19.0 12.0-14.0 11.0-17.0 11.0-13.0 11.0-15.0 11.0-13.0

*Current Models

2.0 COMPACTION EQUIPMENT (Cont.) 2.2 SELF-PROPELLED, VIBRATORY, STEEL DRUM (Cont.) MODEL


2.2.1 SINGLE SMOOTH DRUM VIBRATORY (Cont.) DYNAPAC (Cont.) CA 251 CA250D CA250

58312308-670 (1992) 65220454-761 (2001-up) 65220924 (2002)

9.60 12.25 12.05

152.0 104.6 104.6

CA152D CA152 CA151D CA151 CA30 CA25D CA25 HAMM * 3411 * 3412 * 3410 * 3307 INGERSOLL RAND SD180D * SD175D SD150D SD100D SD70D SD40D SP56 SP48

64221680-64221809 (2005) 64220001-64221679 (1998-04) 598001-59811999 (1989-97) 577000-577106 (1985-87) C800625 25CA292/4971

8.30 7.80 6.45 6.35 11.00 10.00 10.00

95.2 95.2 80.0 80.0 125.0 125.0 125.0 133.3 133.3 133.3 84.4

1,454 1,310 1,007 934 1,479 1,400 1,281 2,303 2,129 2,166 2,050 1,589

1,616 1,455 1,119 1,037 1,643 1,555 1,423 2,559 2,365 2,407 2,278 1,765

210,067 189,189 145,431 134,849 213,642 202,202 185,042 332,618 307,450 312,910 296,140 229,450

2006 2006 2006 2006

11.00 12.00 10.00 7.00 18.00 17.00 15.00 10.00 7.00 4.00 10.00 6.00

230.0 205.0 185.0 125.0 92.0 76.0 111.0 94.0

4,403 4,074 2,724 2,248 1,755 1,520 1,356 1,077

4,892 4,527 3,027 2,498 1,950 1,689 1,507 1,197

635,921 588,510 393,536 324,753 253,539 219,505 195,910 155,584

5000-164799 (1986-00) 5101-174399 (1986-03) (1990-04) 5001-177399 5101-170799 (1990-02) 5001-7849 (1985-89) 5001-7999 (1985-89)

CAPACITY MT. TONS

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

*Current Models



2.2.1 SINGLE SMOOTH DRUM VIBRATORY (Cont.) KOMATSU JV100WA-2 JV100WA-1 SAKAI SV500DF SV 500D SV91 SV90T SV90D VIBROMAX W 1102 W 1002 VOLVO * SD251DX * SD200DX * SD160DC * SD120DC * SD100DC BOMAG BW 215PD * BW212PD-4 * BW212PD-3 BW 212PD * BW211PD-4 * BW211PD-3

10.60 10.60

130.0 130.0

1,685 1,606

1,872 1,784

243,386 231,946

(1990-95)

12.00 12.00 12.00

120.0 120.0 120.0 120.0 120.0

1,948 1,480 905 921 905

2,165 1,645 1,005 1,023 1,005

281,424 213,785 130,702 132,990 130,702

(1992-97) (1992-97)

11.10 10.70

118.0 118.0

1,236 1,098

1,373 1,220

178,464 158,587

225.0 205.0 173.0 125.0 125.0

4,626 4,164 3,092 2,507 2,426

5,140 4,627 3,436 2,785 2,695

668,200 601,510 446,680 362,050 350,350

18.00 11.6 7.08 11.00 11.93 7.08

150.0 132.00 126.00 140.0 132.00 126.00

1,316.0 2,513.0 2,208.0 1,064.0 2,399.0 2,094.0

1,462 2,792 2,453 1,183 2,665 2,327

190,047 362,960 318,890 153,725 346,450 302,510

CAPACITY MT. TONS

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

1997

(2008-up) (2008-up) (2008-up) (2008-up) (2008-up)

25.00 20.00 15.00 12.00 10.00 2.2.2 SINGLE TAMPING FOOT DRUM, VIBRATORY

2005 2005 2005 2003

*Current Models



2.2.2 SINGLE TAMPING FOOT DRUM, VIBRATORY (Cont.) DYNAPAC CA512PD CA511PD CA302PD CA301PD CA262PD CA251PD CA250PD CA152PD CA151PD CA25PD CA15PD FWD WAGNER WC17

1998 1998

17.20 15.45 14.80 11.90 14.20 11.20 13.65 8.60 7.00 12.00 8.00

174.3 155.0 119.3 152.0 142.1 152.0 104.6 95.2 80.0 125.0 73.0

2,593 1,767 2,248 1,841 2,311 1,604 2,187 1,291 1,086 1,479 1,074

2,881 1,964 2,498 2,046 2,567 1,782 2,430 1,434 1,207 1,643 1,194

374,517 255,255 324,753 265,980 333,762 231,660 315,887 168,472 156,871 213,642 155,155

25.00

320.0

1,042

1,158

150,579

HYSTER C450B RAYGO RAM65 VIBROMAX W 1105D W 1102S VOLVO * SD100DC TF * SD70D TF * SD45D TF

(2008-up) (2008-up) (2008-up)

25.00

330.0

3,002

3,335

433,576

25.00

304.0

1,384

1,583

199,914

11.40 11.50

132.0 103.0

2,008 1,263

2,231 1,404

290,004 182,438

10.00 4.00 4.80

125.0 95.0 80.0

2,426 2,072 1,644

2,695 2,302 1,827

350,350 299,260 237,510

OPERATED DRY

OPERATED HOUR

BARE MONTH

2,111 1,797 2,564 2,564 2,605 977 1,272 840 1,845 1,527 1,677 1,677 1,403 896 955 865 925.0 823 895 540

2,346 1,997 2,849 2,849 2,894 1,086 1,414 933 2,050 1,696 1,863 1,863 1,559 996 1,061 961 1,028 914 994 600

304,980 259,545 370,370 370,370 376,233 141,141 183,755 121,264 266,552 220,506 242,190 242,190 202,631 129,415 137,930 124,982 133,640 118,833 129,220 77,935

2,509 2,647

2,788 2,941

362,440 382,382

2,167 1,802 1,563

2,408 2,002 1,737

313,027 260,260 225,797

OPERATED DRY

OPERATED HOUR

BARE MONTH

1,977 1,999 1,702 1,427 1,487 1,462 1,730 1,535 1,634 1,381 1,160 753

2,197 2,221 1,891 1,585 1,652 1,625 1,922 1,705 1,815 1,535 1,289 837

285,571 288,717 245,817 206,063 214,786 211,211 249,821 221,650 235,950 199,485 167,596 108,823

2,309 2,052 2,267 1,878 1,541 1,373 1,046

2,565 2,280 2,519 2,087 1,713 1,526 1,163

333,476 296,439 327,470 271,310 222,651 198,341 151,151

428

475

61,776

*Current Models

2.0 COMPACTION EQUIPMENT (Cont.) 2.2 SELF-PROPELLED, VIBRATORY, STEEL DRUM (Cont.) SERIAL NO./ FLYWHEEL MODEL CAPACITY MT. TONS SERIES (YR.MFG.) HORSEPOWER 2.2.3 TANDEM SMOOTH DRUM, VIBRATORY (Cont.) BOMAG * BW202AD-4 2005 11.50 131.0 BW202AD-2 103.0 * BW161AD-4 2005 10.30 99.0 * BW161AD-2 2001 9.70 99.0 BW161ADH-2 10.30 112.6 BW 160AD-2 8.00 65.0 BW 160AD-1 8.00 82.0 BW 160A-3 7.50 65.0 BW154AD-2 74.0 BW151ADH-2 75.0 * BW151AD-4 2005 8.70 80.4 * BW141AD-4 2005 8.30 80.4 BW141AD-2 74.0 BW138AD-2 41.0 BW138AD 2001 4.20 41.0 BW135AD-2 101650120001 (1995-99) 40.0 BW135AD 101650121099 (2001) 3.56 40.0 BW125ADH-2 40.0 BW125ADH 2001 3.36 40.0 BW 120AD 101880024099 (1986-06) 2.50 34.7 CATERPILLAR * CB434D 2006 7.40 83.0 CB434B 6AL (1995-97) 6.60 80.0 DYNAPAC CC522C 11.70 119.3 CC522 12.55 119.3 CC522 62910566 (2000) 12.00 118.0 *Current Models

2.0 COMPACTION EQUIPMENT (Cont.) 2.2 SELF-PROPELLED, VIBRATORY, STEEL DRUM (Cont.) SERIAL NO./ FLYWHEEL MODEL CAPACITY MT. TONS SERIES (YR.MFG.) HORSEPOWER 2.2.3 TANDEM SMOOTH DRUM, VIBRATORY (Cont.) DYNAPAC CC501 60910501-999 (1997-01) 15.50 210.5 CC422C 10.69 119.3 CC422 62510401-949 (1997-01) 11.20 119.3 CC422 10.50 118.0 CC421 58010228-999 (1998) 10.10 123.4 CC322 9.00 71.1 CC232C 7.88 71.1 CC232 8.70 71.1 CC222C 61810235 (2000-up) 7.48 71.1 CC222 61730593 (1999) 8.00 71.1 CC211 1998 7.08 72.4 CC122C 60110101-116699 (1993-02) 3.00 28.2 INGERSOLL RAND DD110 4999-170899 (1990-02) 11.30 125.0 DD90 5301-171001 (11988-02) 9.70 112.0 * DD80 8.20 112.0 * DD70 150001-160715 (1998-99) 6.70 80.0 DD65 5001-148999 (1988-97) 6.00 76.0 DA50 (1980-91) 10.00 115.0 DA40 7.00 84.0 RAYGO ROMPER 2-36 2.00 35.0 WACKER

RD11A VIBROMAX W752 W552

2.00

18.0

600

667

86,658

8.40 6.50

79.0 54.0

1,274 1,027

1,416 1,141

184,041 148,291

OPERATED DRY

OPERATED HOUR

BARE MONTH

498 443 341

553 492 378

71,929 63,921 49,192

1,723 1,953 1,564 1,514 698

1,914 2,170 1,738 1,682 775

248,820 282,100 225,940 218,647 100,750

2,054 1,635 1,617 1,592 729 677

2,282 1,817 1,797 1,769 810 752

296,660 236,210 233,610 229,970 105,300 97,760

955 707 1,174 533 485

1,062 785 1,304 592 539

137,995 102,102 169,520 76,934 70,070

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

134.0 135.0 95.0 43.0 30.0

915 419 795 634 450

1,016 465 883 704 5,001

132,132 60,489 114,829 91,520 65,065

30.0

302

336

43,615

95.0

449

499

64,922

74.0 54.0 54.0

773 601 519

859 668 576

111,683 86,801 74,932

95.0 43.0

1,203 569

1,337 633

173,745 82,225

35.0

308

342

44,473

FLYWHEEL HORSEPOWER

DAILY

WEEKLY

MONTHLY

3.0-4.0 3.0-4.0 3.0-4.0 3.0-4.0 4.0-5.0

1,374 1,570 1,668 1,766 2,748

5,495 6,281 6,673 7,066 10,991

16,486 18,842 20,019 21,197 32,973

*Current Models

2.0 COMPACTION EQUIPMENT (Cont.) 2.2 SELF-PROPELLED, VIBRATORY, STEEL DRUM (Cont.) SERIAL NO./ FLYWHEEL MODEL CAPACITY MT. TONS SERIES (YR.MFG.) HORSEPOWER 2.2.3 TANDEM SMOOTH DRUM, VIBRATORY (Cont.) VIBROMAX (Cont.) W251D 2.50 25.0 W251 2.40 23.0 VTW22 1.40 13.0 2.2.4 COMBINATION ROLLER VIBRATORY BOMAG BW174AC 2001 8.60 85.0 BW161AC-2 2001 9.40 130.0 BW151AC-2 2001 7.00 75.0 BW151AC-2 74.0 BW120AC-3 30.0 HAMM * HD90 9.19 119.7 * HD75K 7.34 81.6 * HD75 7.60 81.6 * HD70 7.30 81.6 * HD13 3.60 30.6 * HD12 3.10 27.3 2.3 TOWED TYPE, VIBRATOR 2.3.1 SINGLE SMOOTH DRUM BOMAG BW15 2001 14.6 100.0 BW10 2001 9.4 67.0 * BW6S 2005 5.8 50.0 BW6 (2001-up) 5.8 50.0 BW4 4.3 50.0 *Current Models

2.0 COMPACTION EQUIPMENT 2.3 TOWED TYPE, VIBRATORY (Cont.) MODEL


CAPACITY MT. TONS 2.3.1 SINGLE SMOOTH DRUM (Cont.)

DYNAPAC CH61 CH60 CK51 CH47 CH33 & 34 ESSICK 2' X 3' SEAMAN 4' X 6'

15.0

1998 - up 1998 - up

10.0 6.0

2.3.2 SINGLE TAMPING FOOT DRUM BOMAG BW10S BW6S BW4S DYNAPAC CF51 CF47

9.4 6.7 4.8 10.0 6.0 2.3.3 SINGLE SHEEPSFOOT ROLLERS

DYNAPAC CF44 2.0 COMPACTION EQUIPMENT (Cont.) 2.4 RAMMER, VIBRATORY (TAMPERS) MACHINE DESCRIPTION Shoe size (mm) 150-250 250-280 280-330 280-335 280-250 (diesel) Note: Shoe extension not included.

2.5 PLATE COMPACTORS, VIBRATORY

Lbs/blow (KN) 2590 (11.5) 2695 (12.0) 3025 (13.4) 3375 (15.0) 3604 (16.0)

Gasoline Engine (single direction) 300-400 400-500 500-600 Plate Width (mm) Diesel-reversible 300-400 500-700 450-600 550-700 700-1000 700-1000

2250 (10) 3375-3825 (15-17) 4050-5625 (18-25)

3.50 5.00 6.0-8.0

738 984 1,266

2,953 3,938 5,063

8,859 11,813 15,188

5400 (24) 6525 (29) 9008 (40) 13500 (60) 19800 (88) 22500 (100)

4.50 6.00 8.00 13.50 21.00 21.00

1,779 2,847 3,558 4,575 9,150 10,167

7,117 11,387 14,233 18,300 36,600 40,667

21,350 34,160 42,700 54,900 109,800 122,000

No. of Drums 2 (smooth) 2 (smooth) 1 (smooth) 2 (padfoot)

H.P. 6.5 8.0 8.0 21.0

DAILY

WEEKLY

MONTHLY

2,491 3,914 3,203 7,117

9,963 15,657 12,810 28,467

29,890 46,970 38,430 85,400

OPERATED DRY

OPERATED HOUR

BARE MONTH

17,297 15,284 13,899 12,790 8,309 7,570 7,348 6,119 6,011 4,636 4,386 3,130 2,941 2,922 2,273 2,021 1,760 1,556 1,372 1,267 1,245 1,068 778 558 461

19,219 17,582 15,443 14,211 9,232 8,411 8,164 6,799 6,679 5,151 4,873 3,478 3,268 3,247 2,526 2,245 1,956 1,729 1,525 1,408 1,384 1,187 865 620 513

2,498,496 2,285,712 2,007,577 1,847,417 1,200,199 1,093,378 1,061,346 883,883 868,296 669,669 633,490 452,166 424,853 422,136 328,328 291,863 254,254 224,796 198,198 183,040 179,894 154,297 112,398 80,652 66,638

8,187 7,829

9,097 8,699

1,182,610 1,130,844

Note: Transport trolley not included.

2.6 VIBRATORY, WALK BEHIND ROLLERS Roller width (mm) 500-650 650-750 720 560-820

MACHINE DESCRIPTION Lbs/blow (KN) 1800-2700 (8-12) 4050-4500 (18-20) 3420 (15.2) 6975-13950 (31-62)

Note: Transport Trailers not included

3.0 LIFTING EQUIPMENT 3.1 CRANES, CRAWLER STANDARD BOOM, MECHANICALLY / HYDRAULIC OPERATED MODEL

CAPACITY MT. TONS

FLYWHEEL HORSEPOWER

ALL MODELS 391-450 600.0 341-390 600.0 291-340 550.0 251-290 500.0 221-250 450.0 191-220 400.0 161-190 400.0 141-160 350.0 121-140 350.0 101-120 290.0 91-100 290.0 81-90 285.0 71-80 285.0 61-70 275.0 51-60 275.0 46-50 190.0 41-45 190.0 36-40 190.0 31-35 190.0 26-30 145.0 21-25 145.0 16-20 145.0 11-15 145.0 6-10 100.0 2-5 100.0 3.2 CRANES, TRUCK-MOUNTED, STANDARD LATTICE BOOM, MECHANICALLY / HYDRAULIC OPERATED ALL MODELS 241-260 350.0 221-240 240.0

3.0 LIFTING EQUIPMENT 3.2 CRANES, TRUCK-MOUNTED, STANDARD LATTICE BOOM, MECHANICALLY / HYDRAULIC OPERATED (Cont.) OPERATED MODEL CAPACITY MT. TONS FLYWHEEL HORSEPOWER DRY ALL MODELS (Cont.) 201-220 330.0 6,442 181-200 320.0 5,962 161-180 310.0 4,889 141-160 300.0 4,341 121-140 300.0 4,247 101-120 290.0 3,786 91-100 290.0 3,614 81-90 285.0 2,578 71-80 285.0 2,467 61-70 280.0 2,183 51-60 280.0 1,985 4650 246.0 1,661 41-45 246.0 1,418 36-40 238.0 1,324 31-35 238.0 1,243 26-30 238.0 1,162

OPERATED HOUR 8,053 7,453 6,112 5,426 5,309 4,732 4,518 3,223 3,083 2,729 2,482 2,077 1,772 1,656 1,553 1,452

BARE MONTH 1,046,903 968,825 794,508 705,419 690,118 615,186 587,301 418,990 400,829 354,783 322,608 296,984 230,373 215,215 201,916 188,760

21-25 16-20 11-15 6-10 2-5 3.3 CRANES, TRUCK MOUNTED, HYDRAULIC TELESCOPIC BOOM ALL MODELS 181-200 161-180 141-160 121-140 101-120 91-100

200.0 180.0 160.0 100.0 100.0

1,023 825 747 458 391

1,278 1,032 934 573 488

166,166 134,134 121,407 74,503 63,492

464.0 420.0 380.0 350.0 290.0 290.0

7,379 6,872 6,327 5,824 4,914 3,667

9,224 8,590 7,909 7,280 6,142 4,584

1,199,055 1,116,687 1,028,170 946,374 798,512 595,881

3.0 LIFTING EQUIPMENT (Cont.) 3.3 CRANES, TRUCK MOUNTED, HYDRAULIC TELESCOPIC BOOM (Cont.) MODEL ALL MODELS

CAPACITY MT. TONS

FLYWHEEL HORSEPOWER

81-90 71-80 61-70 51-60 46-50 41-45 36-40 31-35 26-30 21-25 16-20 11-15 6-10 2-5

285.0 285.0 280.0 280.0 246.0 246.0 238.0 238.0 238.0 200.0 180.0 160.0 100.0 100.0

OPERATED DRY 2,972 2,380 2,174 1,996 1,844 1,800 1,469 1,416 1,278 1,141 947 796 463 414

OPERATED HOUR 3,659 2,974 2,717 2,495 2,305 2,250 1,836 1,770 1,597 1,427 1,184 994 579 518

500.0 420.0 380.0 360.0 360.0 340.0 340.0 320.0 300.0 300.0 290.0 290.0 280.0 280.0

24,901 18,762 13,422 9,632 9,125 7,910 6,783 5,626 5,257 5,032 3,583 3,322 2,824 2,441

31,127 23,452 16,777 12,040 11,406 9,888 8,479 7,032 6,571 6,290 4,479 4,153 3,530 3,051

OPERATED DRY 2,158 2,105 1,890 1,742 1,461 1,341 1,144 875 726 694 429

OPERATED HOUR 2,697 2,631 2,363 2,177 1,826 1,676 1,430 1,093 908 868 537

4,362

5,453

3.4 CRANES, HYDRAULIC, ROUGH TERRAIN / ALL TERRAIN ALL MODELS 281-300 251-280 231-250 211-230 191-210 171-190 151-170 131-150 111-130 91-110 81-90 71-80 61-70 51-60

BARE MONTH 475,618 386,672 353,210 324,324 299,585 292,435 238,667 230,087 207,636 185,471 153,868 129,272 75,218 67,353

4,046,471 3,048,760 2,181,036 1,565,135 1,482,767 1,285,427 1,102,244 914,199 854,282 817,674 582,296 539,825 458,887 396,682

3.0 LIFTING EQUIPMENT (Cont.) 3.4 CRANES, HYDRAULIC, ROUGH TERRAIN / ALL TERRAIN (Cont.) MODEL ALL MODELS (Cont.)

CAPACITY MT. TONS

FLYWHEEL HORSEPOWER

46-50 41-45 36-40 31-35 26-30 21-25 16-20 13-15 10-12.5 5-9 3.50-4.50

246.0 246.0 210.0 210.0 210.0 200.0 180.0 160.0 123.0 123.0 100.0

BARE MONTH 350,630 342,056 307,164 282,997 237,380 217,932 185,900 142,142 117,975 112,827 69,784

ATTACHMENTS: DRAGLINE OR CLAMSHELL, ADD 10% OF RATE SHOVEL OR BACKHOE, ADD 35% OF RATE ORANGE PEEL GRAPPLE, ADD 20% OF RATE EXTENSION BOOM, ADD 4.00/HR PER FOOT LENGTH OF EXTENSION JIB BOOM, ADD 10% OF RATE DROPBALL, 3 TONS, ADD 10% OF RATE 3.5 HOISTS AND TOWER CRANES 3.5.1 POTAIN LUFFING JIB MR 90

40M X 8T/ 2.1T

708,851

* MR 90B MR 160 * MR 160B MR 205G16 MR 220

40M X 8T/ 2.1T 50M X 10T/ 2.2T 50M X 8T/ 2.2T 45M X 16T/ 3.9T 50M X 12T/ 3T

5,988 6,445 8,733 9,689 8,014

7,485 8,056 10,916 12,111 10,018

973,050 1,047,332 1,419,080 1,574,430 1,302,301

OPERATED DRY

OPERATED HOUR

BARE MONTH

40M X 24T/ 10.7T 40M/50M/60M X 24T/18T/12T/10.7T/7.9T/4.7T 40M/50M/60M X 24T/18T/12T/10.7T/7.9T/5T 40M X 32T/17.5T 40M/50M/60M X 32T/24T/16T/17.5T/13T/9T

6,391 11,428 12,679 13,398 14,321 12,142 18,451 21,604 15,205 23,394

7,989 14,285 15,849 16,747 17,901 15,178 23,064 27,005 19,006 29,242

1,038,570 1,857,050 2,060,370 2,177,110 2,327,130 1,973,114 2,998,320 3,510,650 2,470,754 3,801,460

30M X 3T 52.5M X 6T/1.4T 30M X 3T 57.5M X 6T/1.4T 30M X 4T 60M X 8T/1.4T 30M X 4T 60M X 8T/2.15T 60M X 10T/2.15T 60M X 10T/2.45T 62.5M X 10T/2T 30M X 5T 65M X 10T/2.45T 65M X 12T/2.4T

1,690 2,831 2,057 3,143 2,487 3,554 3,088 5,171 5,171 5,294 7,195 3,620 5,932 6,055

2,112 3,539 2,572 3,929 3,109 4,443 3,860 6,464 6,464 6,618 8,994 4,525 7,415 7,569

274,560 460,031 334,334 510,796 404,118 577,577 501,787 840,268 840,268 860,288 1,169,220 588,302 963,963 983,983

CAPACITY MT. TONS

OPERATED DRY

OPERATED HOUR

BARE MONTH

8,050 8,250 3,890 1,624 7,634 7,996 11,005 8,281 11,428 12,005 8,965 9,450 6,030 6,448 9,394 9,736 13,200 17,596 18,574 12,837 13,103 14,225 19,537 19,975 21,036 34,075 15,167

10,062 10,312 4,862 9,530 9,543 9,995 13,756 10,351 14,285 15,006 11,207 11,813 7,537 8,060 11,743 12,170 16,500 21,995 23,217 16,046 16,379 17,782 24,421 24,969 26,295 42,594 18,959

1,308,060 1,340,560 632,060 1,238,952 1,240,525 1,299,298 1,788,280 1,345,630 1,857,050 1,950,780 1,456,884 1,535,677 979,836 1,047,761 1,526,525 1,528,152 2,145,000 2,859,350 3,018,210 2,085,941 2,129,270 2,311,595 3,174,730 3,245,970 3,418,350 5,537,220 2,464,605

OPERATED

OPERATED

*Current Models

3.0 LIFTING EQUIPMENT (Cont.) 3.5 HOISTS AND TOWER CRANES (Cont.) MODEL LUFFING JIB (Cont.) * MCR 225 * MR 225A * MR 295-H16 * MR 295-H20 * MR 295-H25 MR 405-H24 * MR 405B-H24 * MR415-H24 MR 605-H32 * MR 605B-H32 HAMMER HEAD MD 95A MD95B MD125A MD125B MD175A MD 175B MD185A-H8 MD 185-8 MD 185-10 MD 208 * MD 208A MD235AJ10 MD 238 J10 MD 238 J12

CAPACITY MT. TONS 55M X 14T/2.15T 45M/50M/55M X 14T/10T/7T/3.9T/3T/2.15T 55.2M/60M X 16T/18T/3.15T/2.8T 50.3M/55.2M/60M X 20T/16T/10T 45.5M/50.3M/56.2M/60M/ X 25T/20T/16T/12T/4.85T/3.75T/2.5T

*Current Models

3.0 LIFTING EQUIPMENT (Cont.) 3.5 HOISTS AND TOWER CRANES (Cont.) MODEL

3.5.1 POTAIN (Cont.) HAMMER HEAD (Cont.) * MD 238A-J10 * MD 238A-J12 MD265A-J10 MD 265B1-J10 MD 265B1-J12 MD 285B * MD 285B MD 305B * MD 310B-12 * MD 310B-16 MD 345BL 12 MD 345BL 16 MD345L 12 MD345L 16 MD 365B-L 12 MD 365B-L 16 * MD 365B-L 16 * MD 485B-20T * MD 485B-25T MD 500-12T MD 500-16T MD 500-20T * MD 550-16T * MD 550-20T * MD550-25T * MD560-40T MD 650-25T

67.5M X 10T/2.2T 67.5M X 12T/2.15T 30M X 5T 65M X 10T/2.85T 65M X 12T/2.65T 70M X 12T/ 3.2T 70M X 12T/ 2.8T 70M X 12T/ 3.2T 70M X 12T/ 3.2T 70M X 16T/ 2.7T 75M X 12T/ 3.1T 75M X 16T/ 2.3T 40M X 6T 40M X 8T 75M X 12T/ 3.65T 70M X 12T/ 3.2T 70M X 12T/ 2.8T 90M X 20T/3.1T 90M X 25T/3T 70M X 16T/ 2.7T 70M X 16T/ 7T 70M X 20T/ 6.4T 80M X 16T/ 4.5T 80M X 20T/ 4.3T 80M X 25T/ 4.3T 80M X 40T/ 3.7T 80M X 25T/ 5.9T

*Current Models


CAPACITY MT. TONS

BARE MONTH

MODEL

CAPACITY MT. TONS

BARE MONTH

DRY

HOUR

80M X 32T/ 5.5T 80M X 40T/ 5.5T 70M X 20T/ 12.2T 70M X 32T/ 11T 65M X 12T/2.65T 70M X 25T/ 14.05T 70M X 32T/ 14.15T 70M X 40T/ 14.15T 70M X 50T/ 13T 80M X 32T/ 14.5T 80M X 50T/ 12.5T 80M X 64T/ 12.5T 80M X 32T/ 22.8T 80M X 50T/ 21.5T 80M X 64T/ 20T 60M X 12T/ 2.3T 60M X 12T/ 3T 70M X 20T/ 5T 70M X 16T/ 5.6T 70M X 12T/ 5.9T 20M X 2.0T 35M X 2.5T/ 1T 36M X 2T/ 1T 36M X 2.5T/ 1T 20M X 2.5T 40M X 2.5T/ 1T 42M X 2.5T/ 1T

17,021 17,478 27,750 28,263 30,128 38,410 39,173 39,671 41,696 41,369 59,018 59,404 78,543 79,773 80,184 2,213 2,505 13,027 12,019 11,772 689 1,082 1,353 1,365 816 1,272 1,691

21,276 21,847 34,687 35,329 37,660 48,013 48,966 49,589 52,120 51,711 73,773 74,255 98,179 99,716 100,230 2,767 3,132 16,283 15,024 14,715 861 1,352 1,691 1,706 1,020 1,590 2,114

2,765,906 2,840,123 4,509,362 4,592,731 4,895,748 6,241,690 6,365,580 6,446,570 6,775,600 6,722,430 9,590,490 9,653,150 12,763,270 12,963,080 13,029,900 359,645 407,121 2,116,829 1,953,094 1,912,911 111,969 175,747 219,830 221,780 132,561 206,635 274,820

CAPACITY MT. TONS

OPERATED DRY

OPERATED HOUR

BARE MONTH

42M X 2.5T/ 1.2T 20M X 2.5T 45M X 3T/ 1T 46M X 2.5T/ 1T 46M X 3T/ 1T 20M X 2.5T 50M X 5T/ 1.3T 55M X 6T/ 1.6T 60M X 8T/ 1.4T 60M X 10T/ 2.4T 65M X 10T/ 2.05T 70M X 12T/ 3T 70M X 12T/ 3.2T 70M X 16T/ 2.7T 80M X 25T/ 3T

1,705 909 1,385 1,764 1,793 1,104 1,804 1,642 1,969 2,782 3,131 2,505 3,819 4,584 7,485

2,131 1,136 1,731 2,205 2,241 1,379 2,255 2,052 2,461 3,478 3,914 3,132 4,774 5,730 9,356

277,030 147,719 225,082 286,650 291,330 179,322 293,150 266,760 319,930 452,140 508,820 407,121 620,620 744,900 1,216,280

24.5M X 4T 24.5M X 4T 35M X 4T/ 1.15T 27.8M X 4T 40M X 4T 1.15T 45M X 5T/ 1T 28M X 5T 45M X 6T/ 1.1T 6T 50M X 8T/ 1.35T

1,621 1,621 1,566 2,238 2,089 2,651 2,960 3,806 2,046 3,525

2,026 2,026 1,958 2,797 2,611 3,313 3,700 4,757 2,558 4,407

263,406 263,406 254,540 363,649 339,482 430,716 481,052 618,410 332,540 572,858

CAPACITY MT. TONS

OPERATED DRY

OPERATED HOUR

BARE MONTH

3,840 5,834 3,487 4,140 1,706

4,800 7,292 4,359 5,176 2,133

624,052 947,960 566,709 672,815 277,277

3.5.1 POTAIN (Cont.) HAMMER HEAD (Cont.) MD 650-32T MD 650-40T MD 900-20T MD 900-32T MD 900/50T * MD 900B-25T * MD 900B-32T * MD 900B-40T * MD 900B-50T MD 1400-32T * MD 1400-50T * MD 1400-64T * MD 2200-32T * MD 2200-50T * MD 2200-64T H30/23C H30/30C+C122 K5-50C K4-56C K3-59C MC 45A MC 48B * MC 48C-2T * MC 48C-2.5T MC 50A MC 50B * MC 50C *Current Models


3.5.1 POTAIN (Cont.) HAMMER HEAD (Cont.) * MC 58 MC 65A MC 68B * MC 68C * MC 68C MC 85A MC 85B * MC 115B * MC 175B * MC 205B * MC 235B MC-300 * MC 310K12 * MC 310K16 * MC 475 SELF ERECTING GTMR331B GTMR331B GTMR331C GTMR336A GTMR336B GTMR346 GTMR346A * GTMR 346B * GTMR 360B GTMR386 *Current Models


3.5.1 POTAIN (Cont.) SELF ERECTING (Cont.) GTMR386A * GTMR386B GTMR400 GTMR400A HD40A

31M X 8T 50M X 8T 1.35T 50M X 10T/ 1.73T 33.75M X 8T 31M X 4T

* HD40A HD32A HD26C HD26C-2T HD16C HD16C HD 14C HD40A HD36 HD32 HD30 HD25 HD12 HD11 HD10A HD10A HDM40 * HDM40A HDM32 HDT70

35M X 4T/ 1T 24M X 4T 26M X 3T 26M X 2T 24M X 2T/ 0.75T 20M X 1.5T 18.5M X 1.2T 35M X 4T/ 1T 32M X 4T/ 1T 30M X 4T/ 1.06T 30M X 2T/ 0.85T 27M X 2T/ 0.8T 18M X 1.2T 18M X 1.2T 16.2M X 1T/ 0.6T 16.2M X 1.2T 35M X 4T/ 1T 35M X 1T/ 1T 30M X 4T/ 1T 45M X 6T/ 1T

2,286 1,467 1,348 1,293 1,024 903 864 1,595 1,490 1,395 1,300 1,205 773 626 657 576 2,564 3,062 2,299 3,050

2,857 1,834 1,685 1,616 1,280 1,129 1,080 1,993 1,862 1,744 1,625 1,506 966 782 822 721 3,205 3,827 2,874 3,813

371,410 283,381 219,076 210,067 166,452 146,718 140,426 259,116 242,099 226,655 211,211 195,767 125,554 101,673 106,821 93,665 416,702 497,510 373,659 495,638

CAPACITY MT. TONS

OPERATED DRY

OPERATED HOUR

BARE MONTH

31M X 6T 45M X 6T 1.2T 45M X 6T/ 1.25T 16M X 1.3T/0.6T 18M X 1.3T/0.65T 18M X 1.3T/ 0.7T 20M X 1.8T/ 0.7T 22M X 1.8T/ 0.7T 24M X 1.8T/ 0.7T 26M X 1.8T/ 0.7T 28M X 1.8T/ 0.85T 26M X 2.4T/ 1T 26M X 2.4T/ 1T 26M X 3.2T/ 1T 28M X 2.4T/ 1T 28M X 3.2T/ 1.1T 30M X 4T/ 1T 32M X 4T/ 1T 40M X 4T/ 1T 22M X 1.8T/ 0.4T 20M X 1.8T/ 0.7T 22M X 1.8T/ 0.6T 24M X 1.8T/ 0.7T 40M X 4T/ 0.3T 36M X 4T 43.4M X 10T

3,376 4,492 3,732 907 953 1,013 1,068 891 1,029 1,406 1,564 1,656 2,009 1,835 1,990 2,122 2,093 2,214 2,655 1,750 1,425 1,554 1,819

4,220 5,615 4,665 1,134 1,191 1,266 1,335 1,114 1,286 1,758 1,955 2,070 2,511 2,294 2,488 2,653 2,616 2,768 3,319 2,187 1,781 1,943 2,274

548,548 729,950 606,463 147,420 154,830 164,580 173,550 144,859 167,167 228,540 254,150 269,100 326,430 298,220 323,440 344,890 340,080 359,840 431,470 284,310 231,530 252,590 29,520

708 1,230

886 1,538

115,115 199,914

55M X 6T/ 1.2T 55M X 6T/ 1.6T

3,377 4,531

4,221 5,664

548,730 736,320

CAPACITY MT. TONS

OPERATED DRY

OPERATED HOUR

BARE MONTH

5,951 6,150 5,135 6,712 8,376 9,736 10,431 11,695 11,486 11,905 1,482 575

7,436 7,688 6,419 8,390 10,470 12,170 13,038 14,619 14,357 14,881 1,852 718

966,966 999,427 834,470 1,090,661 1,361,074 1,582,152 1,694,979 1,900,470 1,866,436 1,934,504 240,812 93,379

*Current Models


3.5.1 POTAIN (Cont.) SELF ERECTING (Cont.) HDT70 * HDT80 HDT80 * IGO 10 * IGO 11 * IGO 12 * IGO 13 IGO 15 IGO 18 * IGO 21 * IGO 22 * IGO 24 * IGO 26 * IGO 26 * IGO 28A * IGO 28A * IGO 32 * IGO 36 * IGO 50 * IGO MA13 * IGO MB13 * IGO MB13A * IGO M18 * IGO T70 435A-DM42 744CS-DM45 TOPLESS * MDT 98-1.2M * MDT 128 *Current Models


3.5.1 POTAIN (Cont.) TOPLESS (Cont.) MDT 132 G8 MDT 162 G8 * MDT 178 MDT 192-H12 MDT 222-J12 MDT 302-L12 MDT 302-L16 MDT 412-L10 MDT 412-L16 MDT 412-L20 TOPKIT F2/23B 325A

55M X 8T/ 1.6T 60M X 8T 1.8T 60M X 8T/ 1.5T 60M X 12T/ 2.2T 65M X 12T/ 2.4T 75M X 12T/ 2.3T 75M X 16T/ 2.1T 75M X 10T/ 3.1T 75M X 16T/ 3T 75M X 20T/ 2.7T 50M X 2.3T 25M X 1T

RITHIER GT1372 GT1297 GT1296 GT1268 GT1174 ALIMAK SUPER SCANDO 32/40C SCANDO 20/30 SCANDO 20/30TD SCANDO 20/32 SCANDO 20/32TD PECCO SN 160-12 PECCO SN 160-16 BKT, BN135 SIMMA, GT181

60M X 9T 50M X 6T 45M X 6T 40M X 4.5T 40M X 4T

2,338 1,331 1,205 1,029 1,079

2,923 1,663 1,506 1,286 1,394

379,951 216,216 195,767 167,167 175,318

3,094 1,235 1,331 818 902 2,232 2,365 2,314 1,129 2,188 1,482

3,868 1,543 1,663 1,022 1,127 2,790 2,957 2,892 1,411 2,735 1,852

502,788 200,629 216,216 132,860 146,510 362,648 384,384 375,947 183,469 355,498 240,812

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

26Ft. Heights X 32 Ft. Range

345

431

56,056

750 lbs. X 20Ft. Hts X 26'Range 1000 lbs. X 20Ft. Hts X 26'Range 750 lbs. X 25Ft. Hts X 31'Range 1000 lbs. X 25Ft. Hts X 31'Range 2 Passengers

207 219 245 251 205

259 274 306 314 256

33,605 35,607 39,754 40,755 33,319

107

134

17,420

40M X 4T

CRANE, TOWER SELF-CLIMB, 12T MAXLOAD

COMEDIL GRU CT4824

48.9M X 2.4-5T

*Current Models

3.6 LIFTING EQUIPMENT (Cont.) 3.6 AERIAL LIFTS, SELF PROPELLED MODEL SCISSOR LIFTS, ELECTRIC (Battery powered) GENIE GS2646 JLG CM2033 CM2046 CM2546 CM2558 NIKKEN Model 6MEX HAULOTTE Model CISEAUS-2565 SCISSOR LIFTS, ROUGH TERRAIN (Gas/Diesel) GENIE GS3268 GS4080 JLG 25RTS 33RTS SCISSOR BOOM LIFTS, TELESCOPIC (Gas/Diesel) GENIE S40 S60 S65 S80 S100 S120

CAPACITY

32Ft. Hts X 40 Ft. Range 40Ft. Hts X 46 Ft. Range

23.0 60.0

711 1,109

889 1,386

115,544 180,180

200 lbs. X 25Ft. Hts X 31'Range 1500 lbs. X 33Ft. Hts X 39'Range

30.0 40.0

420 457

525 571

68,211 74,217

60.0 60.0 60.0 60.0 81.0 81.0

1,480 1,922 2,045 2,567 3,170 3,713

1,850 2,402 2,556 3,209 3,962 4,641

240,526 312,312 332,332 417,131 515,086 603,317

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

40.0 43.0 43.0 43.0 43.0 50.0 50.0

505 677 772 1,046 1,511 1,888 2,220 289 384 477 519

631 846 965 1,308 1,889 2,360 2,775 361 480 596 649

82,082 109,967 125,411 170,027 245,531 306,735 360,789 46,904 62,348 77,506 84,370

36.0

1,195

1,494

194,194

50.0 50.0 50.0

773 666 1,013

966 833 1,266

125,554 108,251 164,593

40Ft. Hts 60Ft. Hts 65Ft. Hts 80Ft. Hts 100Ft. Hts 120Ft. Hts

X 46 Ft. Range X 66 Ft. Range X 71 Ft. Range X 86 Ft. Range X 106 Ft. Range X 126 Ft. Range

*Current Models

3.0 LIFTING EQUIPMENT (Cont.) 3.6 AERIAL LIFTS, SELF PROPELLED MODEL

CAPACITY

STRAIGHT BOOM LIFTS, TELESCOPIC (Gas/Diesel) Cont. JLG 1000 lbs. X 40Ft. Hts X 46'Range 40RTS 2500 lbs. X 50Ft. Hts X 56'Range 500RTS 1000 lbs. X 40Ft. Hts X 46'Range 40H 1000 lbs. X 60Ft. Hts X 66'Range 60H 1000 lbs. X 80Ft. Hts X 86'Range 80H 110HX 1000 lbs. X 110Ft. Hts X 116'Range 1000 lbs. X 120Ft. Hts X 126'Range 120HX 30E 500 lbs. X 30Ft. Hts X 13.5'Reach 500 lbs. X 35Ft. Hts X 20.5'Reach 35E 40E 500 lbs. X 40Ft. Hts X 20.5'Reach 500 lbs. X 45Ft. Hts X 22.8'Reach 45E ARTICULATING BOOM, HYDRAULIC (Gas. Powered) GENIE, Z45/40 JLG 500 lbs. X 40Ft. Hts X 23.8'Reach 40HA 45HA 500 lbs. X 45Ft. Hts X 22.5'Reach 60HA 500 lbs. X 60Ft. Hts X 33'Reach 3.7 FORKLIFTS CAPACITY-LBS. (M.T.)

ALL MODELS Diese Driven Standard Mast Pneumatic Tire

3000 (1.36) 4000 (1.81) 5000 (2.27) 6000 (2.72) 7000 (3.18) 8000 (3.63)

50.0 50.0 50.0 60.0 65.0 65.0

478 535 543 645 725 791

597 669 679 806 906 989

77,649 86,944 88,231 104,819 117,832 128,557

CAPACITY-LBS. (M.T.)

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

11000 (4.99) 13000 (5.90) 15000 (6.80) 16500 (7.48) 18000 (8.16) 20000 (9.07) 22500 (10.20) 25000 (11.34) 27500 (12.47) 30000 (13.60) 35000 (15.87) 40000 (18.14) 45000 (20.41) 50000 (22.68) 60000 (27.21) 70000 (31.75) 80000 (36.28) 100000 (45.35)

80.0 80.0 89.0 89.0 114.0 119.0 121.0 132.0 132.0 132.0 161.0 161.0 161.0 180.0 199.0 238.0 238.0 360.0

1,089 1,220 1,281 1,283 1,365 1,422 1,514 1,563 1,610 1,676 1,844 2,467 2,627 2,998 3,262 4,022 4,621 5,618

1,362 1,525 1,602 1,604 1,706 1,778 1,893 1,954 2,012 2,094 2,305 3,083 3,284 3,748 1,078 5,027 5,776 7,022

177,034 198,198 208,208 208,494 221,793 231,088 246,103 253,968 261,547 272,272 299,585 400,829 426,855 487,201 530,101 653,510 750,893 912,912

3.0 LIFTING EQUIPMENT (Cont.) 3.7 FORKLIFTS (Cont.) MODEL STRAIGHT BOOM LIFTS, TELESCOPIC (Gas/Diesel) Cont. ALL MODELS (Cont.)

Diesel Driven Standard Mast Pneumatic Tire

3.8 INTEGRATED TOOL CARRIERS MODEL CATERPILLAR IT28B IT28B IT18B IT14B

SERIAL NO. SERIES (YR.MFG.)

CU.M.

CAPACITY CU.YD.

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

1HF (1986-93) 1HF (1986-93) 4ZD (1986-93) 3NJ (1990-93)

1.53 1.53 1.15 1.00

2.00 2.00 2.00 2.00

110.0 110.0 95.0 75.0

1,696 1,375 1,421 1,316

2,120 1,719 1,777 1,645

275,561 223,509 230,945 213,785


CU.M.

CU.YD.

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

1KF (1989-93) 2YC (1985-91)

1.00 0.95

2.00 2.00

65.0 65.0

1,213 640

1,516 800

197,054 103,961

81.0 81.0 81.0

1,383 1,507 1,552

1,729 1,884 1,940

224,796 244,959 252,252

106.0 106.0

1,715 1,577

2,144 1,971

278,707 256,256

81.50 81.50 81.50 81.50 81.50 104.00 106.00 106.00 106.00 106.00 106.00 123.00 123.00 170.00 170.00

1,107 1,027 1,152 1,134 1,168 1,321 1,385 1,436 1,401 1,217 1,309 1,338 1,606 1,822 1,925

1,384 1,284 1,440 1,418 1,460 1,651 1,731 1,795 1,751 1,521 1,637 1,673 2,008 2,277 2,406

179,894 166,881 187,187 184,327 189,761 214,643 225,082 233,376 227,656 197,769 212,784 217,503 260,975 296,010 312,741

OPERATED DRY

OPERATED HOUR

3.0 LIFTING EQUIPMENT (Cont.) 3.8 INTEGRATED TOOL CARRIERS MODEL CATERPILLAR (Cont.) IT12B IT12 3.9 TELESCOPIC HANDLER

CAPACITY

3.9.1 CATERPILLAR TH62 TH63 TH82 3.9.2 JCB 537-130 537-120 3.9.3 MANITOU MT 732 MT 932 MT 845 T MT 1233 S MT 1337 SL MT 1637 SLT MVT 665 T MVT 675 T MRT 1432 MRT 1542 MRT 1650 MRT 1850 MRT 2145 MHT 7140 MHT 10180 4.0 EXCAVATING EQUIPMENT 4.1 BACKHOE, HYDRAULIC, CRAWLER MOUNTED MODEL


CAPACITY CU.M.

CU.YD. 4.1.1 CATERPILLAR

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR./HR.)

BARE MONTH

* 345C 2001-up 2.00 345B 4SS (1997-00) 2.60 * 330D NBD (2006-08) 2.10 330B/BL 8TR00396 (1998-up) 2.10 330L 6SK (1992-95) 1.50 330 9PJ (1992-95) 1.50 * 325DL SCR (2006-08) 1.15 325BL 6DN (1996-01) 1.30 325L 7CJ (1991-95) 1.30 325 8JG (1991-95) 1.30 322BL 8NR (1996-2001) 1.10 * 320D FAL (2006) 0.98 320C/CL HKT (2004-06) 1.00 320B / 320BL 6CR05219 (2000) 1.00 320L 1TL (1991-96) 1.00 320 7WK (1991-96) 1.00 * 318C BTG (2003) 0.88 * 315C CFL (2001) 0.60 315B 1SW (1997-01) 0.84 * 314C CR KHB (2001-02) 0.52 * 312C BNN (2001-02) 312B 6SW (1998-01) 0.63 312BL 9FS (1997-01) 0.63 ATTACHMENTS: For certain models of Backhoe, Hydraulic, Crawler Mounted additional rates for attachments are allowed: Hydraulic Pavement Breaker - Add 35% of Rate Pavement Breaker - Air Driven - Add 20% of Rate + Air Compressor Rate

2.39 3.40 2.75 2.70 1.96 1.96 1.77 1.70 1.70 1.70 1.47 1.29 1.31 1.31 1.31 1.31 1.16 0.78 1.10 0.68 0.82 0.82

345.0 290.0 268.0 222.0 222.0 222.00 204.00 168.00 168.00 168.00 153.00 138.00 138.00 128.00 128.00 128.00 94.00 110.00 99.00 90.00 90.00 84.00 84.00

6.0-9-0 6.0-9-0

7,329 4,472 5,342 3,778 3,393 3,338 4,284 3,207 2,772 2,667 2,900 3,043 2,485 2,338 2,004 1,703 2,421 2,396 2,375 2,205 2,165 2,174 1,796

9,161 5,590 6,677 4,722 4,242 4,172 5,355 4,008 3,465 3,334 3,626 3,804 3,106 2,923 2,505 2,129 3,026 2,995 2,969 2,756 2,706 2,717 2,245

1,190,930 726,726 868,010 613,899 551,408 542,399 696,150 521,092 450,450 433,433 471,328 494,520 403,832 379,951 325,611 276,705 393,380 389,350 385,957 358,280 351,780 353,210 291,863

OPERATED DRY

OPERATED HOUR

BARE MONTH

1,923 1,950 1,557 1,517 1,177 1,271 1,172 1,081 1,235 721 654 644 692 7,549 4,451 2,751 26,214 2,079 2,020 1,786 1,727 1,391 1,310 1,235 988 9,462 6,073

2,404 2,438 1,946 1,896 1,472 1,589 1,465 1,351 1,543 901 817 805 865 9,436 5,564 3,439 3,267 2,599 2,525 2,233 2,159 11,739 1,638 1,543 1,235 11,827 7,591

312,520 316,888 252,980 246,480 191,334 206,570 190,450 175,630 200,629 117,130 106,210 104,650 112,398 1,226,654 723,294 447,018 424,710 337,909 328,185 290,290 280,709 226,083 212,927 200,629 160,589 1,537,536 986,843

3,695 3,729

4,619 4,662

600,457 606,034

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.1 BACKHOE, HYDRAULIC, CRAWLER MOUNTED (Cont.) MODEL

* 311C U 311B * 308C CR * 307C 307 * 305C CR * 304C CR * 303C CR 303.5 * 302.5C * 301.8C * 301.6C 301.5 E650 E450 EL300B E300B EL240B E240B EL200B E200B E140 E120B E110B E70B 245B SERIES II 235C 231D 225D

SERIAL NO. SERIES (YR.MFG.) CLK (2001-03) 2MS (1996-01) CPE (2001-06) BCM (2000-06) 2WM (1994-97) DSA (2001-03) NAD (2002-05) 2006 AFW (2000-05) 4AZ (1999-05) BFA (2000-05) BDH (2000-05) 3YW (1998-05) 3LG1 (1987-92) 3JG1 (1987-93) 3FJ1 (1990-91) 1WJ1 (1990-91) 5WG1 (1989-92) 8SF1 (1989-92) 7DF1 (1987-91) 6KF1 (1987-91) 1PF1 (1987-94) 7NF (1990-92) 9HF (1990-92) 7YF (1989-94) 6MF /ISJ (198-92) 4DG, 5AF, 2PG 3WG (1988-92) 1NK (1990-94) 6RG (1989-91)

CAPACITY CU.M.

CU.YD.

FUEL FLYWHEEL CONSUMPTION HORSEPOWER (LTR./HR.)

0.52 0.63 0.25 0.25 0.28 0.14 0.14 0.10 0.13 0.06 0.04 0.04 0.06 2.60 1.95 1.38 1.38 1.15 1.15 1.09 1.09 0.63 0.57 0.52 0.28 2.63 1.91

4.1.1 CATERPILLAR (Cont.) 0.68 0.82 0.33 0.33 0.37 0.19 0.19 0.09 0.16 0.08 0.05 0.05 0.07 3.40 2.55 1.80 1.80 1.50 1.50 1.42 1.42 0.82 0.75 0.68 0.37 3.50 2.50

79.0 79.0 54.0 54.0 54.0 42.0 35.5 30.0 25.5 24.9 18.0 17.4 17.4 357.0 276.0 206.0 206.0 148.0 148.0 118.0 118.0 89.0 84.0 79.0 54.0 360.0 250.0

1.61 1.18

2.10 1.54

200.0 150.0

CU.YD.

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

2.47 2.22 1.90 2.30 1.50

296.0 260.0 244.0 197.0 195.0

3,168 2,609 2,154 3,822 1,909

3,960 3,262 2,693 4,778 2,386

514,800 423,995 350,064 621,140 310,167

6.0-9.0 5.0-8.0 5.0-8.0 5.7-6.6 4.8-5.8 4.0-4.7 3.3-3.8 2.5-2.9 2.5-2.9

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.1 BACKHOE, HYDRAULIC, CRAWLER MOUNTED (Cont.) SERIAL NO. MODEL SERIES (YR.MFG.) SOLAR 450-3 SOLAR 400LC-3 SOLAR 330LC-3 * SOLAR 300LC-5 SOLAR 280LC-3

0001-0310 (1998-00) 0001-0399 (1995-98) 0001-0999 (1996-98) 0001-9999 (2003-06) 5001-29999 (1995-98)

CAPACITY CU.M. 4.1.2 DAEWOO 1.90 1.70 1.30 1.75 1.15

* SOLAR 255LC-5 * SOLAR 255LC-5 SOLAR 220LC-3 * SOLAR 175LC-5 SOLAR 170-3 * SOLAR 140LC-5 SOLAR 130-3 SOLAR 70-3 SOLAR S55 SOLAR S035 SOLAR S030 SOLAR S015 SOLAR 010 EX1800-3 EX1100-3 EX800H-5 EX750-5BE EX750-5 EX 450LG-5 EX 400 EX 270LC-5 EX 270 DX

0001-1144 (2003-06) 0001-2159 (2003-06) 0500-50999 (1996-02) 0001-1999 (2003-06) 0001-1019 (1997-00) 0001-1769 (2004-06) 0001-0999 (1996-98) 0001-0259 (1997-99) 1001-35653 (1999-06) 0001-0749 (1997-01) 1001-1269 (1997-00) 0001-0401 (1997-99) 182 (1996) 17E (1987-96) 17C (1996) 006037-80348 (1997-01) 001421-7157 (1988-96) 010106-50233 (1997-02) (1987-96)

1.15 1.00 0.80 0.70 0.60 0.50 0.50 0.25 0.15 0.10 0.07 0.04 0.02 4.1.3 HITACHI 9.60 4.60 3.30 4.10 3.30 1.80 1.60 1.10 1.00

1.50 1.31 1.04 0.94 0.91 0.65 0.65 0.30 0.20 0.13 0.09 0.05 0.03

162.0 148.0 138.0 118.0 113.0 95.0 110.0 56.0 50.6 26.0 20.0 15.5 9.50

3,223 2,906 1,597 2,416 1,373 2,141 1,037 947 734 621 574 479 330

4,029 3,633 1,997 3,020 1,716 2,676 1,296 1,184 917 777 717 598 413

523,770 472,290 259,545 392,600 223,080 347,880 168,454 153,868 119,262 100,958 93,236 77,792 53,625

12.48 6.00 4.30 5.33 4.30 2.35 2.09 1.43 1.31

912.0 560.0 440.0 440.0 440.0 305.0 284.0 170.0 167.3

2,227 10,508 7,407 7,422 7,198 3,709 3,995 2,570 2,396

27,847 13,135 9,259 9,277 8,997 4,637 4,994 3,212 2,995

3,620,045 1,707,563 1,203,631 1,206,062 1,169,597 602,745 649,220 417,560 389,389

CU.YD.

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

1.04 1.00 1.18 0.92 1.04 0.91 0.72 0.58 0.58 0.37 0.37 0.21 0.12 0.09 0.05

135.0 160.0 157.2 126.8 135.0 100.0 96.3 86.2 80.0 55.0 55.0 36.0 23.5 18.5 16.50

2,075 2,359 2,059 1,821 2,087 1,773 1,436 1,211 1,385 1,074 1,117 867 583 510 477

2,594 2,949 2,574 2,276 2,609 2,217 1,795 1,514 1,731 1,343 1,396 1,084 728 637 596

337,194 383,383 334,620 295,867 339,196 288,145 233,376 196,768 225,082 174,603 181,467 140,855 94,666 82,797 77,506

320.0 286.0 320.0 271.0 247.0 232.0 235.0 197.0 183.0 163.0 143.0

5,654 3,059 5,418 4,570 2,773 3,833 3,763 3,458 2,094 2,970 2,586

7,067 3,824 6,773 5,713 3,466 4,791 4,704 4,323 2,617 3,712 3,232

918,710 497,068 880,490 742,690 450,593 622,830 611,520 561,990 340,197 482,560 420,160

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

143.0 130.0 116.0 116.0 105.0 101.0 84.0 59.0 52.0

2,514 1,595 2,278 2,221 2,054 1,302 1,782 1,386 1,149

3,143 1,993 2,847 2,776 2,568 1,628 2,227 1,733 1,436

408,590 259,116 370,110 360,880 333,840 211,640 289,510 225,290 186,680

210.0 130.0 106.5

3,073 1,957 1,556

3,841 2,446 1,945

499,356 318,032 252,824

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.1 BACKHOE, HYDRAULIC, CRAWLER MOUNTED (Cont.) SERIAL NO. MODEL SERIES (YR.MFG.) EX225USR EX220-5 EX 220-2 EX 220-2 EX220-5 EX150LC-5 EX 150 EX 120-2 EX 100-5 EX 60-5 EX 60 EX45-2 EX30-2 EX22-2 EX12-2 * R500LC-7 R450LC-3 * R450LC-7 * R360LC-7A R360LC-3 * R320LC-7 * R305LC-7 * R290LC-7A R290LC-3 * R250LC-7 * R210LC-7

(1995-96) (1990-92) (1990-92) 14M (1996) (1987-93) 001297-3668 (1988-98) (1990-92) 002840-120128 (1998-02)

610001-610049 (2005-07) 10001-10241 (1996-98) 0501-534 (1993-94) 110001-210034 (2003-07) 10001-302 (1996-98) 110001-784 (2003-06)

CAPACITY CU.M. 4.1.3 HITACHI (Cont.) 0.80 0.76 0.90 0.70 0.80 0.60 0.55 0.45 0.45 0.28 0.28 0.16 0.09 0.07 0.04 4.1.4 HYUNDAI 2.09

2.71

1.62

2.10

1.27

1.65

. 110001-710312 (2003-07) 0525-11234 (1993-99) 110157-111045 (2004-07) 611001-5889 (2003-07)

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.1 BACKHOE, HYDRAULIC, CRAWLER MOUNTED (Cont.) SERIAL NO. MODEL SERIES (YR.MFG.) * R210-7 R210LC-3 * R180LC-7 * R160LC-7 * R140LC-7 R130LC-3 * R110-7 * R80-7 * R55-7

10001-14599 (1996-98) 10001-4599 (1996-98) 210001-209 (2003-06) 110039-851 (2004-07) 611001-2778 (2004-07) 10001-11759 (1995-00)

CAPACITY CU.M. 4.1.3 HYUNDAI (Cont.)

CU.YD.

0.87

1.13

0.50

0.65

4.1.5 IHI IS-310J IS-200J-2 IS-190

1.20 0.80 0.70

1.60 1.00 0.92

IS-110GX IS-110J2 IS-110 IS-55J-2 IS-45J-2 IS30J

(1988-93)

* HD2045 III * HD 1430 III * HD 1023 III * HD 820 III HD-650SE * HD 513 III * HD308

2008 2008 2008 2008 (1982-84) 2008 2008

8003001-5099 (1996-99)

0.62 0.50 0.50 0.16 0.14 0.08

0.82 0.65 0.65 0.21 0.18 0.10

94.3 94.0 94.3 50.0 40.0 30.0

1,424 1,311 1,117 923 748 605

1,780 1,639 1,396 1,154 935 757

231,374 213,070 181,467 150,007 121,550 98,384

2.63 1.84 1.31 1.00 0.85 0.65 0.38

306.0 231.0 167.0 150.0 98.0 91.0 55.0

7,044 3,790 2,946 2,538 832 1,874 1,358

8,805 4,738 3,683 3,173 1,040 2,343 1,697

1,144,650 615,940 478,790 412,490 135,135 304,590 220,610

OPERATED DRY

OPERATED HOUR

BARE MONTH

6,276 4,142 3,014 2,383 1,985 1,316 1,206 946 725 691 572 453 451 394 354

7,845 5,178 3,758 2,979 2,482 1,646 1,508 1,183 906 864 715 567 564 493 442

1,019,876 673,101 489,775 387,244 322,608 213,928 196,053 153,725 117,832 112,255 92,950 73,645 73,359 64,064 57,486

13,915 15,233 11,424 8,471 10,798 7,235 8,300 6,837 7,521 7,191 7,797 7,138

17,394 19,041 14,280 10,589 13,497 9,044 10,375 8,546 9,401 8,989 9,746 8,922

2,261,220 2,475,330 1,856,400 1,376,518 1,754,610 1,175,746 1,348,750 1,110,967 1,222,130 1,168,596 1,266,980 159,860

OPERATED DRY

OPERATED HOUR

BARE MONTH

6,718 5,662 3,360 5,391 2,763 3,812 4,109 3,302 3,198 2,604 3,819 3,344 3,173 2,795 2,309 3,080 3,152 2,933 2,367

8,397 7,077 4,200 6,739 3,454 4,765 5,136 4,127 3,997 3,255 4,774 4,180 3,967 3,494 2,886 3,850 3,940 3,666 2,959

1,091,610 920,062 545,974 876,070 449,020 619,489 667,693 536,510 519,610 423,137 620,620 543,401 515,658 454,168 357,232 500,522 512,223 476,580 348,670

4.1.6 KATO 2.00 1.40 1.00 0.80 0.65 0.50 0.28

*Current Models



CAPACITY CU.M.

CU.YD.

FUEL FLYWHEEL CONSUMPTION HORSEPOWER (LTR./HR.)

4.1.7 KOBELCO SK600 SK430-III SK310-III SK220-V SK200-V SK120-V SK100-V SK60-V SK45SR SK40SR SK35SR SK30SR SK25SR SK20SR SK15SR

1992 1993 1993 (1989-93) (1989-93) (1989-93) (1989-90) (1989-93) PY711-607756 (1998-02) PX09088167-1109844 (2001-04) PW0820325-1023015 (2001-04) PV0712527 (1998-02) PU06386-707052 (1998-01)

3.50 2.20 1.60 1.40 1.20 0.70 0.50 0.34 0.14 0.13 0.11 0.09 0.08 0.06 0.04

4.50 2.86 2.08 1.82 1.56 0.91 0.65 0.44 0.18 0.16 0.14 0.11 0.10 0.08 0.05

300.0 300.0 230.0 163.0 140.0 84.0 76.0 56.0 37.0 30.5 26.3 23.0 21.2 14.4 14.5

6.80 6.54 6.50 6.50 5.89 5.90 5.00 5.00 4.58 4.58 4.58 4.00

651.0 611.0 454.0 444.0 454.0 444.0 404.0 404.0 385.0 385.0 385.0 330.0

4.1.8 KOMATSU * PC1250-7 PC1100-6 * PC800-7 PC800-6 * PC750-7 PC750-6 * PC 650-5 PC 650-3 * PC600-7 PC600SE-6 * PC600-6 * PC450-7

20002-249 (2002-07) H010016 (2001-05) 40001-up (2004) 30001-up (2001-up) 20001-140 (2004-06) 10008-1006 (1996-02) 1994 10501-20031 (1986-92) 20001-181 (2003-06) 10001-1129 (2000-05) 65045-354 (2007-08)

5.20 5.00 5.00 5.00 4.50 4.50 3.80 3.80 3.50 3.50 3.50 3.00

52.2-65.2 51-64 70.0-87.5 37-46 70.0-87.5 37-46 32-42 32-42 33.2-41.5 34-42 25.7-32.1

*Current Models


* PC400-7 PC400-6 PC400-5A * PC350-7 PC310-5 * PC300-8 * PC300LC-8 * PC300-7 * PC300 SE-6 PC300-5A * PC228 US-6 PC220-7 PC220-6LC PC220-6 PC220-5A * PC200-8 * PC200LC-8 * PC200-7B PC200-7A

SERIAL NO. SERIES (YR.MFG.) 65243-352 (2007-08) 32001-up (1989-92) 20001-up (2004) 10001-up (1989-up) 2008 A086136-90001 (2007-08) 55263 (2007-08) 300-6-J (1998) 21401-up (1989-92) 2001 60010-5795 (2002-08) 52852-up (1992) (1988-92) C62074-264 (2007-08) A088001-9055 (2007-08) C50063 20001-up (2002)

CAPACITY CU.M.

CU.YD.

2.60 2.60 1.80 1.60 1.50

4.1.8 KOMATSU (Cont.) 3.40 3.40 2.35 1.83 2.00

1.40 2.10 1.32 1.05 1.26 1.00 1.00 1.00

1.83 2.75 1.73 1.37 1.65 1.31 1.31 1.31

1.25 1.17

1.54 1.53

FUEL FLYWHEEL CONSUMPTION HORSEPOWER (LTR./HR.) 306.0 306.0 276.0 242.0 220.0

242.0 242.0 207.0 143.0 168.0 158.0 153.0 153.0 143.0 143.0 143.0 143.0

25.7-32.1 27-31 21.7-26.4 16.3-24.4

16.3-24.4 16.1-20.8 13.3-18.7 15-17 12.7-15.6

9.4-14.1

PC200-6 * PC200 LC-5 PC200-5 PC200-3 * PC160LC-7 * PC138US-2 * PC130-6 * PC128US-2 PC120-6 PC120-5

67200 (1996) 45001-64889 (1988-92) 20001-38418 (1984-90) K045528 (2003-05) 1001-2257 (2002-08) 1992 (1999-04) 2150-8503 47703-up (1992) 30001-40176 (1988-92)

0.80 0.90 0.80 0.80 0.70 0.60 0.50 0.55 0.60 0.50

1.05 1.18 1.05 1.05 0.92 0.78 0.65 0.72 0.78 0.65

133.0 123.0 123.0 118.0 111.0 88.9 86.0 86.0 86.0 84.0

12-14

2,346 2,274 1,706 1,595 2,144 1,935 1,896 1,864 1,595 1,284

2,933 2,843 2,133 1,994 2,680 2,419 2,370 2,330 1,993 1,605

381,238 369,590 277,277 259,259 348,400 314,470 308,100 302,900 259,116 208,637

OPERATED DRY

OPERATED HOUR

BARE MONTH

41-5.4 41-5.4 41-5.4

1,257 1,757 1,381 1,221 1,182 1,541 1,450 1,434 970 947 1,172 1,104 773

1,571 2,197 1,726 1,527 1,477 1,926 1,813 1,793 1,212 1,184 1,465 1,380 966

204,204 285,571 224,367 198,484 192,049 250,393 235,690 233,090 157,586 153,920 190,450 179,400 125,554

6.1-9.2 3.6-5.3 4.1-5.4 3.6-5.3 4.1-5.4

2,340 1,470 1,237 1,402 1,169

2,925 1,838 1,546 1,753 1,461

380,250 238,940 200,980 227,890 189,930

3,030 2,393 1,977 1,784 1,555 1,229

3,787 2,991 2,472 2,230 1,944 1,537

492,349 388,817 321,321 289,861 252,681 199,771

OPERATED DRY

OPERATED HOUR

BARE MONTH

1.04 1.00 0.65

227.0 247.0 247.0 227.0 162.0 128.0 128.0 138.0 89.0

3,344 3,730 3,534 2,902 2,214 2,284 2,057 2,297 1,430

4,180 4,663 4,418 3,628 2,768 2,855 2,572 2,871 1,788

543,400 606,177 574,340 471,640 359,788 371,150 334,334 373,230 232,375

6.02 3.40 3.40 2.62 2.62 2.00 2.00 1.83 1.83 1.83 1.64 1.31 1.20 0.78 0.68

424.0 306.0 306.0 247.0 247.0 192.0 192.0 197.0 168.0 168.0 197.0 143.0 143.0 93.0 99.0

11,823 6,101 4,640 5,174 3,639 3,896 2,968 2,462 3,440 2,509 2,667 2,735 2,237 2,079 1,841

14,779 7,626 5,800 6,467 4,549 4,870 3,710 3,078 4,300 3,136 3,334 3,419 2,796 2,599 2,301

1,921,270 991,380 754,039 840,710 591,305 633,100 482,339 400,114 559,000 407,693 433,420 444,470 363,506 337,870 299,156

7.2-10.8 6.1-9.2 6.1-9.2 6.1-9.2 6.1-9.2 6.7-8.7

*Current Models


PC120-3 PC110R-1 PC100-6 PC100-5A PC100-3 PC95R-2 * PC78US-6 PC75R-2 PC60-7 * PC60-6 * PC50MR-2 * PC40MR-2 PC40-7 MINIMAL SWING RADIUS * PC128UU-2 * PC78UU-6 * PC78UU-3 PC75UU-3 PC50UU-2


CAPACITY CU.M.

CU.YD.


18001-26417 (1984-90) 2001 46448-46961 (1999-02) (1990-92) 18005-32844 (1984-90) 2001 4453-13045 (2002-08) E200120-10261 (2000-03) 49080-60086 (2000-04) 28070 (1999) 5114-9883 (2004-08) 2005 18001-up (1992)

0.50 0.40 0.44 0.44 0.44 0.34 0.34 0.13 0.36 0.30 0.16 0.16 0.13

4.1.8 KOMATSU (Cont.) 0.65 0.52 0.58 0.58 0.58 0.44 0.45 0.17 0.47 0.39 0.21 0.21 0.17

5157-6459 (2000-06) 2005 2005 1994 1994

0.50 0.34 0.22 0.34 0.22

0.65 0.44 0.29 0.44 0.29

86.0 54.0 39.0 54.0 39.0

KAY0001-485 (1994-99) JAU0465-Y1417 (1996-99) HBY0100-2485 (1995-98)

2.10 1.65 1.50 1.40 1.20 0.80

2.73 2.15 1.95 1.82 1.56 1.04

296.0 250.0 178.0 168.0 144.0 99.0

84.0 95.0 79.0 79.0 79.0 82.5 54.0 68.0 54.0 54.0 39.4 39.4 37.0

6.7-8.7 6.6-8.4 6.6-8.4 6.6-8.4 3.6-5.3 3.6-5.3 5.0-7.0

4.1.9 SAMSUNG SE 450 LC-2 SE 350 LC-2 SE 280 LC-2 SE 235 LC-3 SE 210 LC-3 SE 130 LC-2

FCY0076-1023 (1997-99) DBY0045-1325 (1995-98)

*Current Models



CAPACITY CU.M.

CU.YD. 4.1.10 SUMITOMO

SH300 SH300-3 SH300-2 S260F2 SH220LC-3 SH200-CT SH200 SH200-3 SH120-3

260F-20639 (2001) 200C1-2029 (1999)

1.10 1.40 1.46 1.20 1.00 0.80 0.80 0.80 0.50

1.43 1.82 1.57 1.31


4.1.11 VOLVO * EC700B LC * EC460B LC EC460B * EC360B LC EC360B * EC290B LC * EC290B EC 240LC * EC240B LC EC240B EC240 * EC210B LC EC210B * EC140B LC EC140

10011-258 (2006-08) (2002-08) 1-80424 (2002-07) 360V10820 (2002-up) 1-80502 (2002-07) (2002-08) 1-80678 (2002-07) 3764 (2001-08) (2002-08) 1-80640 (2002-07) 3035-3562 (2000-01) (2002-08) 1-17998 (2002-07) (2002-up) 3023-802 (2000-01)

4.60 2.60 2.60 2.00 2.00 1.60 1.60 1.40 1.40 1.40 1.25 1.00 0.92 0.60 0.52

25-31 22-27 18-22

16-20 15-18 9-11

EC55

3013-20404 (2000-02)

0.09

0.12

54.0

1,101

1,376

178,896

OPERATED DRY

OPERATED HOUR

BARE MONTH

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.2 BACKHOE, HYDRAULIC, WHEEL MOUNTED MODEL


CAPACITY CU.M.


212 BFT

3PJ23-1484 (1990-96)

0.20

2006 0001-899 (1996-99) 1996-98 2006

1.00 0.75 0.75 0.75 0.66 0.50 0.50 0.50

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR./HR.) 110.0

1,454

1,818

236,340

0.73 0.65

154.0 143.0 146.0 150.0 143.0 128.0 132.0 134.0

3,477 1,670 1,603 3,218 1,519 2,633 1,323 1,236

4,346 2,088 2,004 4,022 1,899 3,291 1,653 1,546

564,980 271,414 260,546 522,860 246,818 427,830 214,929 200,915

0.91 0.58

110.0 110.0

1,857 1,676

2,321 2,094

301,730 272,272

153.0 130.0 116.0 105.0 101.0 55.0

3,223 2,101 2,635 2,294 1,681 1,349

4,029 2,626 3,294 2,867 2,101 1,686

523,770 341,341 428,220 372,710 273,130 219,180

3,228 2,451

4,035 3,064

524,524 398,255

OPERATED DRY

OPERATED HOUR

BARE MONTH

3,529 2,696 3,706 2,963 2,834 2,285 1,628 1,333 2,122 1,983 672 737

44,141 3,370 4,633 3,704 3,542 2,857 2,035 1,667 2,652 2,478 840 922

573,430 438,100 602,290 481,520 460,460 371,371 264,550 216,645 344,773 322,179 109,252 119,834

128.0

1,867

2,334

303,446

168.0

2,386 1,747 1,274

2,982 2,184 1,593

387,660 283,855 207,064

0.91

143.0 106.0

2,151 1,913

2,688 2,391

349,492 310,882

1.00

63.0

1,439

1,799

233,805

OPERATED DRY

OPERATED HOUR

BARE MONTH

2,750 1,412 2,601 1,354 1,265

3,438 1,764 3,251 1,693 1,581

446,940 229,372 422,630 220,077 205,491

4.2.2 DAEWOO * SOLAR 210W-V SOLAR 200W-3 SOLAR 200 W * SOLAR 180W SOLAR 170W-3 * SOLAR 140W-V SOLAR 130W-3 SOLAR 130 W

2006 2000

1.13 0.97 0.98

4.2.3 HITACHI EX160WD-3C EX100WD-3C

(1988-92) 1991

0.70 0.45

1.19

N50310028

0.92 0.76 0.50

0.65

4.2.4 HYUNDAI * R200W-7 R200W-2 * R170W-7 * R140W-7 R130W-3 * R55W-7

4.2.5 KOMATSU PW250-5 PW210-1

10005-J10095 (1987-95)

1.20 0.87

1.57 1.14

246.50 153.0

14-17

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.2 BACKHOE, HYDRAULIC, WHEEL MOUNTED MODEL

PW170ES-6 PW170-5 * PW160-7 PW150ES-6 PW130ES-6 PW110R-1 PW100-3A PW100-3 PW95R-2 PW75R-2 PW60-3 PW60N-1


CAPACITY CU.M.

2001 1992 2005 2001 2001 2260000001-up (2001) (1890-92) (1981-92) 2001 2001 2232-J02240 (1988-92)

1.00 1.14 0.97 0.70 0.60 0.40 0.44 0.44 0.34 0.27 0.28 0.28

SK100W

YWU1000-1154 (1995-97)

0.45

SE 235 LC-3 SE 210 W-2 SE 130 W-2

FCY0178 (1999) GAY1120 (1997) EBY0001-0212 (1994-97)

1.40 0.45 0.35

EW170 EW150C 4.3 BACKHOE LOADER

CU.YD. 4.2.5 KOMATSU (Cont.) 1.30 1.49 1.27 0.9 0.78 0.52 0.58 0.58 0.94 0.35 0.37 0.37 4.2.6 KOBELCO 0.58 4.2.7 SAMSUNG 1.82 0.58 0.45 4.2.8 VOLVO

3002-3519 (2000-03) 0.70

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR./HR.) 121.0 102.0 121.0 107.0 105.0 95.0 108.0 99.0 82.5 68.0 66.0 50.0

12-14 8.5-10-1

10-12 10-12

4.3.1 CASE 580L

JJG021885-37926 (1994-97)

0.765

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.3 BACKHOE LOADER (Cont.) MODEL


CAPACITY CU.M.


* 446D 446 * 444E 438 SERIES II 436 SERIES II

DBL00121-737 (2004-07) 6XF00118-975 (1989-93) HXB (2008) 3DJ46-2411 (1990-93) 5KF176-1629 (1988-92)

1.10 1.15 1.30 1.06 1.06

1.50 1.50 1.70 1.4 1.38

FUEL FLYWHEEL HORSEPOWER CONSUMPTION (LTR./HR.) 110.0 95.0 102.0 77.0 77.0

8.3-10.5 8.3-10.5

* 434E * 428E 428C 428 426C 426 II 426 * 416E * 416D 416C 416 II 416

FSH 280-1444 (2005-08) SNL150-4934 (2005-08) 8RN00288-5347 (1996-01) 6TC312-11143 (1985-92) 6XN1850-4980 (1999-01) 7BC (1990-92) 7BC152-5464 (1986-92) CBD940-3322 (2006-08) BFP217-17198 (2000-06) 4ZN216-68168 (1996-01) 5PC (1990-92) 5PC16624 (1985-93)

1.15 1.02 1.06 1.06 0.96 0.96 0.96 0.86 0.86 0.76 0.76 0.76

1.5 1.33 1.38 1.38 1.25 1.25 1.25 1.125 1.125 1.00 1.00 1.00

94.0 94.0 76.0 76.0 80.0 75.0 75.0 78.0 78.0 75.0 67.0 67.0

1.70 1.70 1.70 1.70 1.44 1.44 0.80 0.42

96.0 96.0 94.0 94.0 90.0 76.0 65.0 43.0

7.2-9.1 7.2-9.1 8.3-10.2

9.5-11.4 6.4-8.3 7.6-9.5

2,537 2,058 1,822 1,144 1,705 1,023 1,023 1,750 1,633 1,612 968 968

3,171 2,573 2,278 1,430 2,132 1,279 1,279 2,187 2,041 2,015 1,210 1,210

412,230 334,490 296,153 185,900 277,134 166,309 166,309 284,310 265,330 261,976 157,300 157,300

1,654 1,568 1,746 1,462 1,413 1,360 1,310 1,011

2,068 1,960 2,182 1,828 1,767 1,700 1,638 1,264

268,840 254,826 283,660 237,640 229,658 220,935 212,927 164,307

OPERATED DRY

OPERATED HOUR

BARE MONTH

4.3.3 JCB SITEMASTER 4CX, 4X4X4, Servoplus 4CX, 4X4X4, Powershift 4CX4WS 4CX 3CX PLUS, 4X4 3CX, 4X4 2CX STREETMASTER, 4X4X4 1CX

400030-8794 (1991-99)

1.30 1.30 1.30 1.30 1.10 1.10 0.61 0.32

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.3 BACKHOE LOADER (Cont.) MODEL


CAPACITY CU.M.

CU.YD. 4.3.4 JOHN DEERE

710D 410E 310E

(1992-97) 1997 1997

1.24 0.96 0.86


1.61 1.25 1.12

115.0 90.0 71.0

2,035 1,434 1,080

2,543 1,792 1,350

330,616 232,947 175,461

4.3.5 KOMATSU RIGID WB97S-2 * WB97R-5 WB93R-2 * WB93R-5 ARTICULATED * WB140-1 WB98A-2 WB70A-1

9SF11205-up (2001) F50003-up (2005) 93F23453-up (2001) F50003-up (2005)

1.03 1.03 1.03 1.03

1.4 1.35 1.35 1.35

97.8 97.8 97.8 97.8

1,689 2,169 1,412 1,982

2,111 2,711 1,766 2,477

274,417 352,430 229,515 322,010

F20001-up (2001) F20001-up (2001)

1.10 1.10 0.70

1.43 1.43 0.92

96.5 96.5 69.7

1,878 1,675 1,272

2,348 2,093 1,591

305,240 272,129 206,778

1.30 1.25

90.0 72.5

1,321 1,232

1,651 1,540

214,643 200,200

1.3

93.8

1,842

2,302

299,260

5.00 4.00 3.00

360.0 360.0 250.0

9,415 9,600 6,265

11,769 12,000 7,831

1,529,957 1,559,987 1,018,017

CU.YD.

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

2.38 5.00 3.40

250.0 375.0 276.0

6,371 7,319 4,712

7,964 9,149 5,891

1,035,320 1,189,331 765,765

23.40 13.65

1,658.0 912.0

39,088 19,707

48,860 24,633

6,351,774 3,202,342

78.0 60.0 18.0 79.0 100.0 74.0 80.0 70.0 70.0 113.0

923 495 449 785 684 376 355 340 340 1,152

1,154 618 561 981 855 470 443 425 425 1,440

150,007 80,336 72,930 127,556 111,111 61,061 57,629 55,198 55,198 187,187

4.3.6 NEW FERMEC MF 960 MF 750

1.00 0.96 4.3.7 VOLVO

* BL71 4.4 POWER/FRONT SHOVEL

1.09

8-10

4.4.1 CATERPILLAR 245B FS SERIES II (FRONT DUMP) 245B FS SERIES II (BOTTOM DUMP) 235B FSI (FRONT DUMP)

(1998-90) (1992-93) (1998-90)

3.80 3.10 2.30

*Current Models

4.0 EXCAVATING EQUIPMENT (Cont.) 4.4 POWER/FRONT SHOVEL (Cont.) MODEL 235C FS (BOTTOM DUMP) E650 FS (BOTTOM DUMP) E450 FS (BOTTOM DUMP)

SERIAL NO. SERIES (YR.MFG.) (1988-92) (1987-92) (1987-93)

EX 3500-3 000101-339 (1988-01) EX 1800-3 000501-558 (1997-01) 4.5 TRENCHERS CLEVELAND 45-36, JS-36 WHL TYPE-12" BUC CLEVELAND V110 WHL TYPE-7.5" BCKTS 6FT DITCHWITCH 182 DH DITCHWITCH 7020 DW w/ H12 DITCHWITCH R100 CHAIN TYPE-8" CUT WIDTH PARSON 150W WHL TYPE-16" BCKTS 6' DEPTH GARWOOD DITCH DIGGER BARBER GREENE 44C, LOADER TYPE ARMY TYPE LOADER VERMEER T-600D/CHAIN 10" WIDTH 6' DEPTH

CAPACITY CU.M. 4.4.1 CATERPILLAR (Cont.) 1.80 3.80 2.60 4.4.2 HITACHI 18.00 10.50

VERMEER T-800A/CHAIN 12" WIDTH 8' DEPTH VERMEER T-600/CHAIN 10"-24" WIDTH 72' DEPTH VERMEER T-800A/CHAIN 12"-36" WIDTH 96' DEPTH 5.0 FOUNDATION EQUIPMENT ( PILE DRIVING / BOREED PILING ) 5.1 HAMMER, PILE W/O CRANE, W/ 60FT. LEAD MAXIMUM RATED MODEL ENERGY DELMAG, Single Acting D100-13 300,000 ft. lbs. D80-23 225,000 ft. lbs.

175.0 113.0 217.0

1,297 1,162 1,867

OPERATED DRY

OPERATED HOUR

BARE MONTH

8,422 6,402

10,527 8,003

1,368,510 1,040,325

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

69,898 ft. lbs. 58,248 ft. lbs. 48,400 ft. lbs. 225,000 ft. lbs. 300,000 ft. lbs.

4,784 2,809 2,572 1,286 2,475 1,273 1,867 1,717 1,458 1,177 752

5,980 3,511 3,215 1,608 3,094 1,591 2,334 2,146 1,823 1,472 941

777,348 456,456 417,989 209,040 402,259 206,830 303,446 278,993 236,951 191,334 122,265

13500 KG-M 10500 KG-M 7500 KG-M

1,756 1,555 1,243

2,195 1,944 1,554

285,285 252,681 202,059

2,765 1,793 1,232 999 790 644

3,456 2,241 1,540 1,249 988 805

449,306 291,291 200,200 162,305 128,414 104,676

2.2

2,950 1,558 1,062 1,134 835 896 658

3,687 1,948 1,328 1,418 1,044 1,120 823

479,336 253,253 172,601 184,327 135,707 145,574 106,964

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

557 497

696 622

90,519 80,795

402.30 272.22 222.00 315.14 205.00

3,842 2,455 3,295 6,277 1,440

4,803 3,069 4,118 7,846 1,800

624,338 398,970 535,392 1,020,019 233,948

300.00

10,109

12,637

1,642,784

300.00

10,795

2,195

1,754,181

257.00

9,017

11,272

1,465,321

185.00

8,226

10,283

1,336,764

FLYWHEEL HORSEPOWER

1,621 1,453 2,334

5.0 FOUNDATION EQUIPMENT ( PILE DRIVING / BOREED PILING ) (Cont.) 5.1 HAMMER, PILE W/O CRANE, W/ 60FT. LEAD (Cont.) MODEL DELMAG, Single Acting D62-22 D46-32 D46-23 * D46-13 D36-32 * D36-02 D30-32 D25-32 D22 D16-32 D8-22 IDH 45 - DSL 35 - DSL 25 - DSL KOBELCO K60 - DSL K45 - DSL K35 - DSL K25 - DSL K22 - DSL K13 - DSL MITSUBISHI MH72B - DSL MH45B - DSL MH45 - DSL MH35 - DSL M33 - DSL MH25 - DSL MH15 - DSL


MAXIMUM RATED ENERGY

165,000 ft. lbs. 107,177 ft. lbs.

83,880 ft. lbs.

13500 KG-M 10500 KG-M 7500 KG-M 3700 KG-M 21600 KG-M 13500 KG-M 13500 KG-M 10500 KG-M

IDH-22020213 (1997)

7500 KG-M 4500 KG-M

*Current Models

5.0 FOUNDATION EQUIPMENT ( PILE DRIVING / BOREED PILING ) (Cont.) 5.2 DRIVER, PILE VIBRATORY ELECTRIC DRIVEN MODEL


MAXIMUM RATED ENERGY

NIPPEI NVC-80, 60 KW, W/O GENSET TOMEN VIBRO VM2-4000E, 6O KW, W/O GENSET 5.3 DRIVER, PILE VIBRATORY HYDRAULIC DRIVEN VIBRO FONCEUR, PTC50H1A 24860 VIBRO FONCEUR, PTC25H1A 13-115 MHF12 w/ Hyd. Power Pack. MENCK MHF5-12 62827 AKP300 Hydraulic Pile Driver 5.4 DRILLING RIG, HYDRAULIC CRAWLER TYPE C.M.V. TH18/65, 2000 mm. Dia. 65M. depth & 18000Kg.-m. Drill Torque. 1180 C.M.V. TH22/65, 2500 mm. Dia. 68M. depth & 22000Kg.-m. Drill Torque. 1197 Casagrande-Italy, Model C40, 1800 mm. Dia., 20M depth. Casagrande-Italy, Model RM21, 1800 mm. Dia., 20M depth. LLAMADA (SPAIN), Model P-100 TT

70,000 Kg.-m. 45,000 Kg.-m. 120 KN-m. 175 KN-m. 25 Ton

210,782 188,903 303,446

1800 mm. Dia., 53m. Depth.

330.00

9,468

11,835

1,538,537

175.00

3,077

3,847

500,071

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

160.00

4,510

5,638

732,875

3000 USG 3000 USG 1330 USG

100.00 100.00 90.00

875 749 636

1,071 936 795

139,282 121,693 103,389

540.00 gals.

8.0

279

349

45,370

227.00

8,659

10,824

1,407,120

295.00 227.00

12,649 8,656

15,118 10,820

2,055,482 1,406,548

142.00 130.00 100.00 90.00 80.00 82.00 110.00 88.00

2,093 2,641 832 994 916 1,131 2,622 1,079

2,616 3,301 1,041 1,242 1,145 1,414 3,278 1,349

340,054 429,143 135,278 161,447 148,863 183,755 426,140 175,318

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

174.00 174.0 102.00 35.00

6,776 6,225 4,510 1,772

8,470 7,781 5,638 2,215

1,101,100 1,011,582 732,875 288,002

112.00 112.00 73.00 73.00 52.00 32.00

2,198 2,073 1,844 1,737 1,309 1,150

2,748 2,592 2,305 2,171 1,637 1,438

357,214 336,908 299,585 282,282 212,784 186,901

180.00 87.00 136.00 100.00 42.00 228.00 173.00 150.00 100.00 80.00 70.00 106.00

6,234 5,659 5,457 5,610 2,822 5,095 4,410 3,715 3,121 2,276 4,805 4,120

7,792 7,074 6,834 7,013 3,528 6,369 5,513 4,644 3,901 2,845 6,006 5,150

1,013,012 919,633 888,459 911,625 458,601 827,970 716,690 603,720 507,130 369,850 780,780 669,526

100.00 80.00 10.00

1,376 1,466 3,484

1,720 1,833 4,355

223,652 238,238 566,150

FLYWHEEL

OPERATED

OPERATED

5.5 DRILL RIG, MECHANICAL ROTARY (W/O CRANE AND CONSUMABLE) CMV, Model TRM35/21, 600-2000mm. Capacity 68M. Depth, 21,000 kgm complete with 4x12 Kelly bar, drilling auger, flat bottom drilling bucket and testing kit 5.0 FOUNDATION EQUIPMENT ( PILE DRIVING / BOREED PILING ) (Cont.) 5.6 PILING RIG, TRI-AXIAL, HYDRAULIC MODEL

CAPACITY

NIPPON SHARYO, MODEL DHJ60-2, SN. AO-1501, w/ Hydraulic auger drive, VA35 and Triple auger drive 6.0 ASPHALTING EQUIPMENT 6.1 DISTRIBUTOR, ASPHALT ETNYRE BT-RS / 5 TONS ROSCO / 5 TONS LITTLEFORD SPRAYMASTER BLAW KNOX-HOT TACK * HT 540T 6.2 REPAVER ASPHALT WIRTGEN 2500, 3750 mm. working width 6.3 REMIIXER ASPHALT WIRTGEN 4500, 3.0-4.5m. working width 0-0.60m. working depth WIRTGEN 2500, 3750 mm. working width 6.4 PAVER/FINISHER CMI AP 1100/10 FT. WIDTH BARBER GREENE SB-140 / 10 FT. WIDTH BG245 BG245X312 SA41E 873 / 8 FT. WIDTH CEDARAPIDS 11-102 FPM BSF-2/10 FT. WIDTH WIBAU-BLAWKNOX BK165 W/ 12" VIB SCREEN BLAWKNOX PF-180H / 10 FT. WIDTH *Current Models

6.0 ASPHALTING EQUIPMENT (Cont.) 6.4 PAVER/FINISHER (Cont.) MODEL CATERPILLAR AP1050B AP1000 AP800C AP200B DEMAG DF120C DF120P DF100C DF100P DF80P DF50C INGERSOLL RAND TITAN 325 TITAN 273 TITAN 225 TITAN 225 TITAN 111 * ABG TITAN 7820 * ABG TITAN 6620 * ABG TITAN 5820 * ABG TITAN 3870 * ABG TITAN 2820 PF-161 PF-181 NIIGATA NF220VDM NF220BIIVDM * NF 220B-11-TY1DM


CAPACITY

6ZN133-245 (1996-05) 1HD23-186 (1988-98) 1PM507-801 (1994-08) 2NK3-1000 (1992-02) 4.7 M. PAVING WIDTH 4.7 M. PAVING WIDTH 4.7 M. PAVING WIDTH 4.7 M. PAVING WIDTH 4.0 M. PAVING WIDTH 2.5 M. PAVING WIDTH

936 1506 NF2201583 (1995)

*Current Models

6.0 ASPHALTING EQUIPMENT (Cont.) 6.4 PAVER/FINISHER (Cont.) MODEL

SERIAL NO.

CAPACITY

BARE MONTH

MODEL SERIES (YR.MFG.) MITSUBISHI MF40W MF36W AF5-3473 ALLAT C-300 62E74 VOGELE * SUPER 1800, BASIC WIDTH-2,550 MM, MAX WIDTH-8,500 MM MAX THICKNESS-300 MM * SUPER 1603-1, BASIC WIDTH-2,550 MM, MAX WIDTH-7,000 MM MAX THICKNESS-300 MM * SUPER 1600-1, BASIC WIDTH-2,550 MM, MAX WIDTH-8,000 MM MAX THICKNESS-300 MM * SUPER 800, BASIC WIDTH-1,100 MM, MAX WIDTH-3,200 MM MAX THICKNESS-200 MM * SUPER 600, BASIC WIDTH-1,100 MM, MAX WIDTH-2,700 MM MAX THICKNESS-150 MM 6.5 COLD MILLING MACHINE WIRTGEN SF2100C 2100 mm milling width / 150 mm max depth SF1900C 1920 mm milling width / 150 mm max depth SF1300C 1300 mm milling / 130 mm max depth SF1000C 1000 mm milling width / 85 mm max depth SF500C 500 mm milling width / 74 mm max depth SF300C 300 mm milling width / 50 mm max depth * W2100 milling width-2,100 mm max depth 320mm * W2000 milling width-2,000 mm max depth 320mm * W1900 milling width-2,000 mm max depth 320mm W1900 2.000 m milling width / 0-0.320 m working depth

CAPACITY

BARE MONTH

HORSEPOWER

DRY

HOUR

72.0 72.0

328 328 94

410 410 118

53,339 53,339 15,301

171.0

6,487

8,109

1,054,170

129.0

5,048

6,310

820,300

129.0

5,298

6,622

860,860

56.0

4,085

5,106

663,780

54.0

2,099

2,624

341,120

370.0 400.0 235.0 99.0 48.0 24.0 700.0 565.0 456.0 429.0

3,428 4,116 2,481 1,597 780 452 8,984 8,598 6,313 7,551

4,268 5,145 3,101 1,997 975 565 11,230 10,747 7,891 9,439

557,128 668,811 403,117 259,545 126,698 73,502 1,459,900 1,397,110 1,025,830 1,227,083

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

256.0 256.0 248.0 207.0 199.0 173.0 173.0 105.0 49.0 122.0 81.0 57.0

3,878 3,682 4,615 2,981 3,784 2,626 2,599 2,022 1,174 1,918 1,314 1,047

4,848 4,603 5,768 3,726 4,730 3,283 3,249 2,528 1,467 2,398 1,642 1,309

630,240 598,390 749,892 484,380 614,900 426,790 422,370 328,614 190,762 311,740 213,460 170,170

750.0 450.0

7,660 5,394

9,574 6,743

1,244,672 876,590

440.0 430.0 430.0 335.0 335.0

2,072 3,826 5,788 4,106 4,254

2,591 4,783 7,235 5,133 5,317

336,765 621,764 940,511 667,238 691,262

563.0 395.0

10,525 8,369

13,156 10,461

1,710,280 1,359,930

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

375.0 210.0 210.0 120.0

4,606 2,943 1,284 1,151

5,757 3,667 1,605 1,439

748,462 476,762 208,637 187,044

215.0 32.0 169.0 169.0

4,990 2,688 5,412 3,678

6,237 3,361 6,765 4,598

810,810 436,865 879,450 597,740

*Current Models

6.0 ASPHALTING EQUIPMENT (Cont.) 6.5 COLD MILLING MACHINE (Cont.) SERIAL NO. (YR.MFG.)

MODEL / CAPACITY WIRTGEN (Cont.) * W1300F milling width-1,320 mm max depth-315 mm * W1000F milling width-1,000 mm max depth-315 mm W1000F 1.0000 m milling width / 0-0.315 m working depth * W1000 milling width-1,000 mm max depth-250 mm W1000 1.000 m milling width / 0-0.250 m working depth * W1000L milling width-1,000 mm max depth-250 mm * W600DC milling width-600 mm max depth 300 mm W500 0.500 m milling width / 0-0.160 m max working depth W350 0.350m milling width / 0-0.100 m max working depth * W50DC milling width 500 mm max depth 210 mm * W50C milling width 500 mm max depth 160 mm * W35DC milling width 350 mm max depth 110 mm 6.6 PAVEMENT PROFILER PR 750B PR 450 6.7 SOIL STABILIZER/ ROAD RECLAIMER KOEHRING LA-107 CAT SM350 CAT RM350 CAT SS250B CATRR250B 6.8 ROAD RECYCLER/ STABILIZER WIRTGEN * WR 2100 working width - 2,400 mm working depth - 500mm * WR 2100 working width - 2,400 mm working depth - 500mm

6DD (1985-96) 6ED (1985-96)

SERIES

*Current Models

7.0 CONCRETING EQUIPMENT 7.1 PAVER/FINISHER, CONCRETE MODEL CMI ROTO MILL PR-375 PR-225 TRUELINE CONCRETE FINISHER REX CONCRETE FINISHER GOMACO GP-2500 SLIPFORM SPRAYER GP-2000 SLIPFORM SPRAYER GT300 COM. III COMANDER III/GT-6300


40MT MC1904424 900100-438 (2005)

CAPACITY

7.5M PAVING WIDTH

42" Trimming width

* C-450 NEW GEN. FINISHER C-450 FINISHER WACKER TRUSS SCREED ROLLER SCREED SINGLE TUBE TRIPLE TUBE SOMERO LASER SCREED S240 S160 POWERCURBER 8700 5700 WIRTGEN * SP500

MCI6386-08

2006

2,000 mm basic width/

40.0 32.0 5.5

1,903 1,945 436

2,379 2,431 545

309,270 316,030 70,785

10.0 25.0

975 2,774

1,219 3,467

158,444 450,736

64.0 64.0

6,683 5,606

8,353 7,008

1,085,942 911,053

160.0 84.5

5,835 4,575

7,294 5,719

948,233 743,457

171.0

8,734

10,917

1,419,210

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

6,000 mm max width 400 mm max thickness

*Current Models

7.0 CONCRETING EQUIPMENT (Cont.) 7.1 PAVER/FINISHER, CONCRETE (Cont.) SERIAL NO. SERIES (YR.MFG.)

MODEL

CAPACITY

WIRTGEN * SP250

2006

2,500 mm max width / 300 mm thickness

99.0

5,395

6,744

876,720

* SP150

2006

1.5 mm basic width

80.0

3,497

4,371

568,230

FLYWHEEL HORSEPOWER

OPERATED DRY 229 216 201 183 170 152 137 120

OPERATED HOUR 286 270 251 229 212 190 172 150

335.0 290.0 195.0

1,866 1,570 1,307

2,333 1,962 1,633

303,264 255,060 212,316

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

175.00 160.00

1,135 921

1,418 1,151

184,392 149,604

335.00 290.00 195.00 175.00 160.00

1,676 1,427 1,180 1,023 842

2,095 1,783 1,475 1,279 1,052

272,376 231,816 191,724 166,296 136,812

100.00

130.00

1,661

2,076

269,841

100.00 100.00 70.00

130.00 130.00 175.00

1,468 1,168 1,879

1,835 1,460 2,349

238,524 189,761 305,305

100.00 60.00

246.00 180.00

2,834 1,805

3,543 2,256

460,603 293,293

60.00

267.00 347.00 267.00 188.00 180.00

6,070 4,162 3,597 1,985 1,776

7,588 5,202 4,496 2,481 2,220

986,440 676,260 584,480 322,530 288,574

830 mm max thickness 7.2 MIXERS, CONCRETE (TILTING/NON-TILTING DRUM) MODEL MODEL (BAGGER)

CAPACITY

CU.FT./MIN.

41.0-45.0 37.0-40.0 25.0-36.0 19.0-18.0 13.0-12.0

3 to 4 2.5 to 3 1.5 to2 1 0.5 7.3 MIXERS, TRANSIT

7.0-26.0

4.0-6.0 1.0-3.0 7.3.1 U.S. AND W. EUROPE MAKES 11.0-12.0 8.0-10.0 6.5-7.5

ALL MODELS

BARE MONTH 37,180 35,035 32,604 29,744 27,599 24,739 22,308 19,448

*Current Models

7.0 CONCRETING EQUIPMENT (Cont.) 7.3 MIXERS, TRANSIT (Cont.) MODEL ALL MODELS (Cont.)

ALL MODELS

7.4 PUMP, GROUT & CONCRETE Concrete Pump Diesel Driven, Trailer-Mounted less pipe CHALLENGE 905 PR, Squeeze Crete with Truck & boom Titan, Trailer-Mounted, less pipes CALLAGHAN, S-100B, Stationary REED 3120 3080 BHP PUTZMEISTER * BSA 2115H, 12,000 KGS * BSA 2110HPD 360 Bar * BSA 2110HD, 360 Bar * BSA 1408-D, Stationary BSA 1406EMD, Stationary

CAPACITY 7.3.1 U.S. AND W. EUROPE MAKES 5.00-6.00 3.50-4.50 7.3.2 JAPAN AND OTHER MAKES 11.00-12.00 8.00-10.00 6.50-7.50 5.00-6.00 3.50-4.50

* BRF 32.12L BRF 32.09L

310.00 310.00

7,466 6,044

9,333 7,555

1,213,290 982,124

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

180.00 223.00 200.00 180.00 180.00 115.00

4,578 3,194 1,840 1,212 2,188 1,563

5,733 3,992 2,300 1,515 2,735 1,954

745,316 518,960 299,013 196,911 355,498 253,968

62.00 55.00

130.00 94.00

671 400

839 499

109,109 64,922

60.00 60.00

95.00 270.00

723 5,307

904 6,634

117,546 862,433

95.00 87.00

242.70 100.60

3,263 2,358

4,079 2,948

530,244 383,240

125.00 150.00 60.00

350.00 500.00

1,558 2,179 1,109 1,266

1,948 2,747 1,386 1,583

253,253 357,071 180,180 205,777

DAILY

WEEKLY

MONTHLY

*Current Models

7.0 CONCRETING EQUIPMENT (Cont.) 7.4 PUMP, GROUT & CONCRETE (Cont.) MODEL

CAPACITY

PUTZMEISTER (Cont.) BRF 28.09, Truck-Mounted with boom * BRA 2100HD BRA 2100, Trailer-Mounted BRA 1406-D, Trailer-Mounted BF1405X, Truck-Mounted FLOWCRETE, FC848BT3, Trailer Mounted ELBA-SCHEELE Type K6018-1 with Truck & Boom Stationary, Type B-5518D with pipes SCHWING With Standard accessories & pipes BPL601DO 28/24, Truck-Mounted SCHWING, Trailer-Mounted BP3500HDR BP2000HDR SCHWING, Trailer-Mounted KVM34XG KVM42 PUMPPIT w/ standard accessories and pipes Pumpcrete, WHITEMAN 100D

M.TONS/CU.M./HR

80.00 90.00 60.00 50.00

MODEL

MAXIMUM AGGREGATE SIZE (mm)

CAPACITY CU.M./HR

7.4.1 MORTAR PUMP / SPRAY / GROUT ( Wet Type ) ELECTRIC DRIVEN TURBOSOL MINI TURBOSOL MINI AVANT

6 Round 6 Round

1.0-2.0 1.0-2.0

5,344 8,482

21,375 33,929

64,125 101,786


CAPACITY CU.M./HR

DAILY

WEEKLY

MONTHLY

8 Round 8 Round 10 Round 38 19

3.0-5.0 3.0-5.0 2.0-3.0 23.0 7.7

18,661 9,500 7,719 28,233 23,100 11,000 8,875

74,643 38,000 30,875 112,933 92,400 1,954 44,000 35,498

223,929 114,000 92,625 338,800 277,200 253,968 132,000 106,495

9,698 7,950

38,792 31,799

116,375 95,396

11,083

44,333

133,000.00

11,497 6,930

45,986 27,721

137,959 83,163

5,626 7,283 11,497 7,583

22,502 29,133 45,986 30,330

67,507 87,400 137,959 90,991

CAPACITY CU.M./HR

DAILY

WEEKLY

MONTHLY

3.0-5.0 1.5-2.0

10,806 8,313

43,225.00 33,250.00

129,675 99,750

*Current Models

7.0 CONCRETING EQUIPMENT (Cont.) 7.4 PUMP, GROUT & CONCRETE (Cont.) MODEL ELECTRIC DRIVEN (Cont.) TURBOSOL UNI30 DS TURBOSOL UNI 30 TURBOSOL POLI-T REED B30 REED B10 PUTZMEISTER P13DMR BSM, Air Driven REED SOVA, Air Driven ALLEN TOWNE, Air Driven

3.5-10.0

7.4.2 MORTAR PUMP / SPRAY / GROUT ( Dry Type ) 1.5-6.9

7.4.3 MORTAR PUMP / SPRAY / GROUT ( Wet & Dry Type) REED LOVA/LOHE 3.5-19.0 0.75-25.5 Note: Shotcrete machines can be use as mortar and grout pump. 7.4.4 GROUTING MACHINES GARNER DENVER 16X5X10, Air Driven 6X3X6, Air Driven IHI NAS-2505, NES-100 MCG-300 TONENAS, Electric Driven WORTHINGTON, 6X4X6, Air Driven 7.0 CONCRETING EQUIPMENT (Cont.) 7.4 PUMP, GROUT & CONCRETE (Cont.) MODEL


7.4.5 SCREED PUMP ( Wet or Dry Mix ) TURBOSOL TM250E/B Apemat A190E

20.0 20.0

NOTE: * FOR TRUCK-MOUNTED - ADD 15% OF RATE * PIPES W/ ONE COUPLING PER LENGTH - ADD P0.15 PER LINEAR METER PER CU.M. * DISCHARGE HOSE - ADD P0.65/LINEAR M./CU.M. * PLACING AND REINFORCING OF PIPES & COUPLING, START-UP & CLEANING - LESSEE'S ACCOUNT * AIR COMPRESSORS, HOSES, COUPLERS NOT INCLUDED FOR AIR DRIVEN PUMPS 8.0 HAULING EQUIPMENT 8.1 DUMP TRUCK, ON/OFF-HIGHWAY TYPE MODEL

CAPACITY

CU.M.

ALL MODELS

11.48-15.3 9.18-11.47 6.88-9.17 4.595-6.87 2.29-4.58

ALL MODELS

11.48-15.3 9.18-11.47 6.88-9.17 4.59-6.87 2.29-4.58

CAPACITY

CU. YDS.

8.1.1 U.S. AND W. EUROPE MAKES 15.00-20.00 12.00-14.99 9.00-11.99 6.00-8.99 3.00-5.99 8.1.2 JAPAN AND OTHER MAKES 15.00-20.00 12.00-14.99 9.00-11.99 6.00-8.99 3.00-5.99

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

385.0 290.0 275.0 220.0 175.0

1,373 1,176 1,044 828 702

1,716 1,460 1,306 1,036 877

223,080 191,100 169,728 134,628 114,036

380.0 290.0 275.0 220.0 175.0

1,308 1,082 964 775 594

1,634 1,352 1,205 968 743

212,472 175,812 156,624 125,892 96,564

OPERATED DRY

OPERATED HOUR

BARE MONTH

28,243 14,340 20,812 9,917 15,049 9,781 13,942 9,307 7,367 12,284 6,211 5,915 11,516 4,460

35,304 17,926 26,015 12,396 18,811 12,227 17,427 11,634 9,209 15,355 7,764 7,393 14,395 5,575

4,589,520 2,330,328 3,381,950 1,611,480 2,445,430 1,589,484 2,265,510 1,512,420 1,197,144 1,996,150 1,009,320 961,116 1,871,350 724,776

8,413 7,747 6,284 5,994 5,842 4,652 4,511 5,327 3,814 4,537 3,296

10,516 9,684 7,855 7,493 7,303 5,815 5,639 6,658 4,767 5,672 4,121

1,367,080 1,258,920 1,021,150 974,090 949,377 755,898 733,018 865,579 619,762 737,308 535,678

OPERATED DRY

OPERATED HOUR

BARE MONTH

3,123 5,137 3,960 3,458

3,904 6,422 4,950 4,322

507,507 834,834 643,500 561,847

9,555 9,592 9,286 6,418 8,838 8,523 8,290 8,385 7,331

11,944 11,989 11,608 8,022 11,048 10,654 10,362 10,481 9,164

1,552,720 1,558,619 1,508,980 1,042,911 1,436,240 1,385,020 1,347,060 1,362,504 1,191,320

8.0 HAULING EQUIPMENT (Cont.) 8.2 DUMP TRUCK, OFF-HIGHWAY QUARRY TYPE MODEL


* 785C 785 * 777F 777B * 775F 775D * 773F 773D 773B * 772 771D 769D * 770 769C

2006 8GB (1984-93) 2006 4YC (1984-92) 2006 6KR (1995-up) 2006 7ER (1996-up) 63W (1978-95) 2006 6JR (1996-up) 5TR00367 (1995-up) 2006 01X (1978-96)

* 740 * 735 * 730 * 725 D400D WL D350D WL D350D D300E D300B D250E D250B (6WD)

2006 2006 2006 2006 8TF (1989-95) 9RF (1989-94) 9RF (1989-94) 7FN (1995-98) 4SD (1985-91) 5TN (1995-98)

CAPACITY MT. TONS


8.2.1 CATERPILLAR 136.00 1,450.0 130.00 1,380.0 90.00 1,000.0 85.00 870.0 65.00 787.0 62.60 693.0 55.00 740.0 52.30 650.0 50.00 650.0 45.00 598.0 40.00 485.0 38.00 485.0 48.00 511.0 35.00 450.0 8.2.2 CATERPILLAR ( ARTICULATED ) 40.00 457.0 35.00 408.0 30.00 325.0 25.00 309.0 40.00 385.0 35.00 285.0 35.00 285.0 30.00 285.0 30.00 260.0 25.00 260.0 25.00 218.0

91.0-96.0 79.5-109.8 53.0-73.8 41.6-56.8 36.0-53.0 37.9-54.9 32.2-41.6

28.4-37.9 23.2-32.6 23.1-32.4 16.3-23.0 14.8-20.8

19.7-27.7 18.3-25.8 11.70

*Current Models

8.0 HAULING EQUIPMENT (Cont.) 8.2 DUMP TRUCK, OFF-HIGHWAY QUARRY TYPE (Cont.) SERIAL NO. MODEL SERIES (YR.MFG.) D250B (4WD) D40D D30D D25D

5WD (1995-91) 2JJ (1989-94) 3AJ (1989-97) 1989-1992

A40E, 6X6 LM A40E, 6X6 A40D, 6X6 A40C, 6X6 A35E, 6X6 LM A35E, 6X6 A35D, 6X6 A35C, 6X6 A30E, 6X6

(2007-up) (2007-up) (1999-07) (1993-99) (2007-up) (2007-up) (1999-07) (1993-99) (2007-up)

FLYWHEEL FUEL HORSEPOWER CONSUMPTION 8.2.2 CATERPILLAR ( ARTICULATED ) (Cont.) 25.00 218.0 40.00 385.0 28.00 30.00 285.0 20.4-28.7 25.00 260.0 18.3-25.7 8.2.3 VOLVO ( ARTICULATED ) 39.00 476.0 39.00 476.0 40.00 420.0 26-34 40.00 398.0 26-34 33.50 426.0 33.50 426.0 35.00 387.0 24-31 35.00 328.0 24-30 28.00 343.0 CAPACITY MT. TONS

A30D, 6X6 A30C, 6X6 * A25E, 6X6 A25D, 6X6 A25C, 6X6 A20C, 6X6

(1999-07) (1993-99) (2007-up) (1999-07) (1993-99) (1993-99)

R-32 R-40 R-60 R-65

30.00 30.00 24.00 24.00 25.00 20.00 8.2.4 EUCLID 32.00 40.00 60.00 65.00

1998 1998 1998 1998

324.0 289.0 305.0 306.0 255.0 232.0

20-25 20-25

4,974 5,522 5,086 4,287 4,748 4,302

6,217 6,903 6,358 5,359 5,935 5,378

808,236 897,325 826,540 696,696 771,485 699,127

4,705 6,666 9,353 10,190

5,882 8,333 11,691 12,737

764,621 1,083,225 1,519,804 1,655,797

OPERATED DRY

OPERATED HOUR

BARE MONTH

22,242 13,684 16,137 14,038 16,892 14,446 13,440 15,914 11,210 13,111 11,511 9,802 8,016 5,346 4,330

27,803 17,105 20,172 17,547 21,115 18,058 16,800 19,892 14,013 16,389 14,389 12,252 10,020 6,683 5,413

3,614,390 2,223,650 2,622,334 2,281,110 2,744,950 2,347,540 2,184,000 2,585,960 1,821,677 2,130,570 1,870,570 1,592,760 1,302,587 868,725 703,703

9,148 7,310 7,922 7,588 7,103

11,435 9,138 9,902 9,485 8,879

1,486,579 1,187,940 1,287,260 1,233,050 1,154,270

2,827

3,534

459,459

4,450 4,462

5,563 5,578

723,190 725,140

OPERATED DRY

OPERATED HOUR

BARE MONTH

4,358 4,098 4,682 728 610

5,448 5,122 5,853 910 762

708,240 665,860 760,903 118,261 99,060

423 333

529 416

60,783 54,080

1,199 1,081 951 736 625

1,499 1,351 1,189 920 781

194,844 175,656 154,596 119,652 101,556

1,101 997 881 681 569

1,376 1,247 1,102 851 712

178,932 162,084 143,208 110,604 92,508

17-23 16-22 16-20

300.0 398.0 700.0 700.0

*Current Models

8.0 HAULING EQUIPMENT (Cont.) 8.2 DUMP TRUCK, OFF-HIGHWAY QUARRY TYPE (Cont.) SERIAL NO. MODEL SERIES (YR.MFG.) * HD785-7 HD785-5 HD785-3A * HD605-7R * HD605-7 * HD605-5A * HD465-7R * HD465-7 HD465-5A * HD405-6 HD405-5A * HD325-7R HD325-6A HD255-5 HD205-3

2007 1998 2001-up (1988-up) 2008 2004 2001 2008 2004 4001-up (1990-up) 2001 1998 2008 1994 (2001-08) 1994

* HM400-2R * HM400-1 * HM350-2R * HM350-1 * HM300-1

2004 2008 2004 2004

AD250 * VOLVO FM 380 6 X 4, 15 cu, meter * VOLVO FM 340 6 X 4, 17 cu, meter

FLYWHEEL FUEL HORSEPOWER CONSUMPTION 8.2.5 KOMATSU 91.00 1,178.0 78.00 1,042.0 58.8-78.4 78.00 1,010.0 43-48 63.00 715.0 63.00 715.0 46.0-61.4 63.00 715.0 41.9-55.9 55.00 715.0 55.00 715.0 46.0-61.4 46.00 715.0 32-37 41.00 488.0 29.9-39.9 35.70 508.0 32.00 488.0 32.00 488.0 29.9-39.9 22.00 310.0 19.8-26.3 22.00 296.0 13.0-14.8 8.2.6 KOMATSU ( ARTICULATED ) 324.0 40.00 324.0 26.1-34.8 35.60 389.0 35.60 389.0 23.5-31.4 30.10 430.0 19.8-26.4 8.2.7 MITSUBISHI 215.0 8.2.8 VOLVO 22.00 380.0 27.00 340.0 2.7-3.1

CAPACITY MT. TONS

*Current Models

8.0 HAULING EQUIPMENT (Cont.) 8.2 DUMP TRUCK, OFF-HIGHWAY QUARRY TYPE (Cont.) MODEL * VOLVO FM 340 6 X 4, 15 cu, meter * VOLVO FM 340 6 X 4, 13.5 cu, meter

VOLVO FL10 VOLVO BM-681, 12.5 CU. YD. * VOLVO WG64 4 X 4, 14.0 cu, meter

CAPACITY MT. TONS 22.00 20.00 33.50 18.50

FLYWHEEL HORSEPOWER

FUEL CONSUMPTION

8.2.8 VOLVO (Cont.) 340.0 340.0 318.0 170.0 8.2.9 OTHER MAKES

KOEHRING DUMPTOR * KENWORTH T600 8.3 CARGO TRUCK ALL MODELS

13.0-15.0 11.0-12.0 9.0-10.0 6.0-8.0 2.0-5.0

ALL MODELS

13.0-15.0 11.0-12.0 9.0-10.0 6.0-8.0 2.0-5.0

8.3.1 U.S. AND WESTERN EUROPE MAKES 320.0 290.0 270.0 195.0 160.0 8.3.2 JAPAN AND OTHER MAKES 320.0 290.0 270.0 195.0 160.0

*Current Models

8.0 HAULING EQUIPMENT (Cont.) 8.4 TRAILERS, HIGH AND LOW BED ( 15 TONS MIN.), W/ TRUCK TRACTOR NOTE: Rental rates for Trailers, High and Low Bed (15 tons min.), Truck Tractor are computed based on tha following assumptions:

a. P4.00 for High Bed Trailers & P4.25 for Low Bed Trailers per revenue ton per km. based on the latest fuel/tire prices as of January 2009. b. Existing paved roads and normal traffic using the national highway. c. Limited to the mobilization of construction equipment and their accessories which are not allowed by the government to use or travel on their own on national highways or roads for reasons of their size, capacity and danger to public safety such as crawler tractors, crawler cranes, etc. d. The distances are based on the table as shown in Section G. e. No loads on the return trip. 50% surcharge will be made on load during the return trip. f. Four (4) hours are allowed on loading and unloading of the cargo. Please take note that the rates are subject to charge w/o prior notice. It is not intent of the guidbook to be used for the rates not related to equipment leasing. A 10% surcharge will be made for on/off highway road. Examples of these computations for certain locations/distances are shown below: MODEL

CAPACITY MT. TONS

HIGH BED

20.0 25.0 20.0 25.0 20.0 25.0

1,200 1,200 4,800 8,448 10,560 25,632 32,040 13,248 16,560

CAPACITY MT. TONS

LOW BED

WITHIN LESSEE'S COMPOUND (4 HRS. MIN.) WITHIN METRO MANILA (4HRS. MIN.) WITHIN METRO MANILA (SINGLE TRIP BASIS) FROM MANILA TO CLARK FROM MANILA TO CLARK FROM MANILA TO PORO POINT FROM MANILA TO PORO POINT FROM MANILA TO SUBIC FROM MANILA TO SUBIC MODEL WITHIN LESSEE'S COMPOUND (4 HRS. MIN.) WITHIN METRO MANILA (4HRS. MIN.) WITHIN METRO MANILA (SINGLE TRIP BASIS)

1,800 1,800 10,800

8.0 HAULING EQUIPMENT (Cont.) 8.4 TRAILERS, HIGH AND LOW BED ( 15 TONS MIN.), W/ TRUCK TRACTOR (Cont.) MODEL

CAPACITY MT. TONS

LOW BED

25.0 60.0 25.0 60.0 25.0 60.0

11,220 26,928 34,043 81,702 17,596 42,228

FROM MANILA TO CLARK FROM MANILA TO CLARK FROM MANILA TO PORO POINT FROM MANILA TO PORO POINT FROM MANILA TO SUBIC FROM MANILA TO SUBIC 8.5 SPECIALIZED TRAILERS W/ TRUCK TRCTOR MODEL BULK CEMENT TRAILER W/ AIR COMPRESSORS BULK CEMENT TRAILER W/ AIR COMPRESSORS DUMP TRAILER TWIN GATES CMI 452 BOTTOM DUMP 'CHALLENGE' TWIN GATES E40 BOTTOM DUMP 'LOADING' TWIN GATES 30-35 BOTTOM DUMP 'CHALLENGE' TWIN GATES BDS FRUEHAUF DES-021A20 9.0 AIR EQUIPMENT 9.1 COMPRESSOR, AIR PORTABLE ALL MODELS - ROTARY VANE - ROTARY SCREW - GAS/DIESEL ENGINE

27.3 18.2 45.0 28.0 20.0 20.0 20.0

FLYWHEEL HORSEPOWER 320.0 290.0 320.0 290.0 260.0 260.0 260.0

OPERATED DRY 1,879 1,739 2,334 1,665 1,597 1,579 1,524

OPERATED HOUR 2,348 2,173 2,917 2,081 1,997 1,974 1,906

901-1000 Cfm 801-900 Cfm 751-800 Cfm 701-750 Cfm 601-700 Cfm 501-600 Cfm 456-500 Cfm 356-450 Cfm 331-350 Cfm 316-330 Cfm

283.0 281.0 250.0 228.0 196.0 179.0 150.0 130.0 103.0 93.0

1,506 1,401 1,253 1,170 1,094 1,040 771 714 540 507

1,882 1,751 1,566 1,462 1,367 1,300 964 892 675 634

FLYWHEEL HORSEPOWER 92.0 73.0 69.0 51.0 42.0 34.0 30.0 20.0

OPERATED DRY 492 459 371 334 286 245 200 151

OPERATED HOUR 615 574 464 417 358 306 250 189

CAPACITY MT. TONS

BARE MONTH 305,292 282,516 379,236 270,504 259,584 256,620 247,728

244,673 227,656 203,632 190,047 177,749 169,026 125,268 115,973 87,802 82,368

9.0 AIR EQUIPMENT (Cont.) 9.1 COMPRESSOR, AIR PORTABLE (Cont.) MODEL ALL MODELS - ROTARY VANE - ROTARY SCREW - GAS/DIESEL ENGINE

9.2 PNEUMATIC BREAKERS - HAND HELD ALL MODELS W/ 50 FT. HOSE, OILERS & ATTACH

CAPACITY MT. (cfm) 251-315 186-250 161-185 126-160 86-125 61-85 36-60 15-35

BARE MONTH 79,937 74,646 60,346 54,197 46,475 39,754 32,461 24,596 10,143

9.3 DRILLS, CRAWLER RDC ROTARY DRILL GD JOY ROTARY BH58 ATLAS COPCO ROC610-02 S'83 2.5 "-4.5" D ROC301-04 S'83 2.5 "-4.5" D AIR TRACK PR-143 THOR GARDNER DENVER ATD-3100A W/ PR123 AD-10 X 5 X 10 AD-10 X 4.5 X 10 AD-10 X 4 X 10 AD-6 X 3 X 6 INGERSOLL RAND CM695D ECM690

Hydraulic, 2.5-4in.Dia. Hydraulic, 2.5-4in.Dia.

802 802

1,002 1,002

130,273 130,273

557 442 552 468

696 552 690 585

90,519 71,786 89,661 76,076

7.0

387 200 190 178 157

484 250 238 222 196

62,920 32,461 30,888 28,886 25,454

310.0 310.0

5,049 7,584

3,611 9,480

820,391 1,232,374

FLYWHEEL HORSEPOWER

OPERATED DRY

OPERATED HOUR

BARE MONTH

237.0 170.0 185.0 215.0 215.0 170.0 213.0 140.0

3,714 3,323 5,200 2,542 1,642 3,323 2,886 1,815 557 415 377 182

4,643 4,154 6,500 3,178 2,053 4,154 3,608 2,269 696 519 471 228

603,603 539,968 844,987 413,127 266,828 539,968 469,040 295,009 90,519 67,496 61,204 29,601

196 148 148 128

245 185 185 161

31,889 24,024 24,024 20,878

245 194 170

306 243 212

39,754 31,603 27,599

220 142

275 177

35,750 23,023

9.0 AIR EQUIPMENT (Cont.) 9.3 DRILLS, CRAWLER (Cont.) MODEL

CAPACITY SPECIFICATIONS

INGERSOLL RAND ECM660 ECM580 ECM490 ECM370 ECM350 CDH 931C XL635 LM470C LM351/VL 140 LM200/VL 120 LM100/YD 90 WORTHINGTON 6 X 4 X 6 9.4 DRILLS, DIAMOND CHICAGO PNEUMATIC CP-65 CP-55A CP-55 CP-8 TONE THS-5 TAX TCP-14 MINDRILL F-25A E-100

Hydraulic, 2.5-4in.Dia. Pneumatic, 2.5-4in.Dia. Pneumatic, 2.5-4in.Dia. Hydraulic, 3-5in.Dia. Hydraulic, 2.5-4in.Dia.

64-102 mm Dia. 57-89 mm Dia. 44-64 mm Dia.

7.0

9.0 AIR EQUIPMENT (Cont.) 9.4 DRILLS, DIAMON (Cont.) OPERATED MODEL CAPACITY MT. TONS DRY FAILING, 43-SA-2 194 AIR-DRIVEN, CP-55 194 BOYLES BROS. AS 194 BOYLES-JOY, B-12 142 BOYLES - X-RAY 142 KATO 20THC 142 ATTACHMENT: Down-to-Hole Attachment, Add 25% of Rate Note: Original rods, bits and coupling supplied by lessor, replacement rods, bits, etc., shall be for the Lessee's account.

OPERATED HOUR 243 243 243 177 177 177

BARE MONTH 31,603 31,603 31,603 23,023 23,023 23,023

10.0 PUMPING EQUIPMENT ( WATER PUMPS) 10.1 SELF PRIMING CENTRIFUGAL PUMPS SUCTION DIAMETER (mm)

Gasoline Models 38 50 50 75 100 Diesel Models 75 100

OUTPUT (lpm)

HORSEPOWER

DAILY

WEEKLY

MONTHLY

320 520 600 1000 1800

2.5 3.5 5.0 5.0 7.5

280 333 370 435 987

1,121 1,330 1,480 1,741 3,946

3,363 3,991 4,440 5,224 11,839

900 1300

4.8 5.5

1,007 1,348

4,029 5,392

12,086 16,177

10.0 PUMPING EQUIPMENT ( WATER PUMPS) (Cont.) 10.2 SELF PRIMING CENTRIFUGAL THRASH PUMPS OUTPUT/DISCHARGE SUCTION DIAMETER (mm) (lpm) Gasoline Models 50 783 75 1517 100 2667 Diesel Models 50 567 75 1517 100 2367 150 4933 200 7885 250 10093 10.3 DIAPHRAGM PUMPS Gasoline Models 50 183 75 333 100 505 100 568 10.4 SUBMERSIBLE PUMPS Gasoline Models 50 916 75 1200 Electric Models 50 360-450 50 480-700 50 750-1000 50 360-510

SOLID SIZE CAPACITY (mm)

FLYWHEEL HORSEPOWER

DAILY

WEEKLY

MONTHLY

25 38 50

5.0 7.5 16.0

998 1,331 2,130

3,994 5,325 8,520

11,981 15,975 25,560

25 28 50 50 50 50

5.0 6.7 10.0 32.0 70.0 85.0

1,464 1,864 3,728 9,319 23,963 29,288

5,857 7,455 14,910 37,275 95,850 117,150

17,572 22,365 44,730 111,825 287,550 351,450

32 45 50 50

5.0 5.0 8.0 13.0

1,864 2,019 3,883 6,756

7,455 8,076 15,531 27,024

22,365 24,229 46,594 81,073

5.0 5.0

1,488 1,735

5,950 6,942

17,850 20,825

PHASE Single Single Single Three

1.0 1.9 2.5 1.5

923 1,477 1,600 923

3,691 5,906 6,398 3,691

11,074 17,719 19,195 11,074

PHASE

KW

DAILY

WEEKLY

MONTHLY

Three Three Three Three Three Three Three Three Three

2.5 2.5 3.5 9.0 22.0 12.0 22.0 59.0 59.0

1,600 1,969 1,969 3,076 6,768 4,676 6,029 14,766 14,766

6,398 7,875 7,875 12,305 27,070 18,703 24,117 59,063 59,063

19,195 23,625 23,625 36,914 81,211 56,109 72,352 177,188 177,188

LENGTH (m)

DAILY

WEEKLY

MONTHLY

6 6 6 6 6

102 163 192 237 424

407 651 769 949 1,695

1,221 1,953 2,306 2,848 5,086

15 15 15 15

45 72 102 201

181 289 407 802

543 868 1,221 2,407

10.0 PUMPING EQUIPMENT ( WATER PUMPS) (Cont.) 10.4 SUBMERSIBLE PUMPS (Cont.) OUTPUT/DISCHARGE SUCTION DIAMETER (mm) (lpm) Electric Models (Cont.) 75 750-1000 75 (Trash) 700-800 75 1500-2000 100 2400-3500 100 (Trash) 2500-3000 100 3800-4500 150 5000-6100 200 7500-8400 250 15000-19000 Note: Unit includes protection switches and 15 meters cables. 10.5 SUCTION HOSE DIAMETER (mm)

38 50 75 100 150 10.6 DISCHARGE HOSE 50 75 100 150 Note: Add 3% for every meter additional length

10.0 PUMPING EQUIPMENT (WATER PUMPS (Cont.) 10.7 SUMP - PUMP - AIR DRIVEN (PUMP UNIT ONLY) MODEL

CAPACITY

BARE MONTH

10.7.1 ATLAS COPCO DIP 65 S'83 DIP 65 S'83 DIP 65 S'83 DOP 15 S'83 PDA20A3 DIAPHRAGM PDA20A1 DIAPHRAGM 35A3 CENTRIFUGAL 35A1 CENTRIFUGAL 251SA1 CENTRIFUGAL 251A3 CENTRIFUGAL 251A1 CENTRIFUGAL

132 IMP. GAL/MIN./10M. HEAD 264 IMP. GAL/MIN./10M. HEAD 330 IMP. GAL/MIN./10M. HEAD 70 IMP. GAL/MIN./10M. HEAD

1,718 1,718 1,718 1,757 1,412 1,412 1,066 1,038 1,025 915 915

226A3 CENTRIFUGAL 226A1 CENTRIFUGAL 10.8 MUD PUMP

800 813

YAMADA YUKI DP-75 BAC AIR DRIVEN 2-DIAPH

3" SUCTION / DISCHARGE

3,161

Note: Hoses and couplings are not included for all types of water pumps. Actual volume output will depend on total dynamic head. 11.0 POWER GENERATING EQUIPMENT 11.1 GENERATOR SETS MODEL

ALL MAKES

CAPACITY (KW) 1901-2000 1801-1900 1701-1800

(KVA) 2376-2500 2251-2375 2126-2250

CAPACITY (KW) 1601-1700 1501-1600 1401-1500 1301-1400 1201-1300 1101-1200 1001-1100 901-1000 801-900 701-800 601-700 501-600 401-500 351-400 301-350 251-300 201-250 151-200 101-150 51-100 41-50 31-40 21-30 16-20 11-15 6-10 1-5

(KVA) 2001-2125 1876-2000 1751-1875 1626-1750 1501-1625 1376-1375 1251-1375 1126-1250 1001-1125 876-1000 751-875 626-750 501-625 439-500 376-438 314-375 251-313 189-250 126-188 64-125 51-63 39-50 26-38 20-25 14-19 8-13 1-6

BARE MONTH

722,026 647,064 613,612

11.0 POWER GENERATING EQUIPMENT (Cont.) 11.1 GENERATOR SETS (Cont.) MODEL

ALL MAKES (Cont.)

BARE MONTH

590,904 573,812 544,754 544,754 427,306 410,947 386,773 322,601 295,493 259,334 238,586 192,400 148,123 119,566 101,170 96,986 84,063 64,381 40,238 33,374 28,607 25,370 25,126 22,226 16,221 17,872 14,977

12.0 SHOP EQUIPMENT 12.1 WELDING MACHINE MODEL

GAS/DIESEL DRIVEN

ELECTRIC DRIVEN/DC OUTPUT

TRANSFORMER/AC OUTPUT

AMPERES 500 400 300 250 200 150 500 400 300 500 400 350 300

12.2 SHOP MACHINE Universal Milling Machine, Electric, Less Power Lathe Machine, 8-9 Feet Bed, Electric, Less Power Shaper, Electric, Less Power

FLYWHEEL HORSEPOWER 70.0 54.0 48.0 18.5 15.0 10.0

OPERATED DRY 431 409 297 264 196 116 312 213 187 277 221 193 150

OPERATED HOUR 539 512 371 330 245 145 391 266 233 347 276 241 187

7.5-10.0 3.0-5.0 5.0-7.5

BARE MONTH 70,070 66,495 48,191 42,900 31,889 18,876 50,765 34,606 30,316 45,045 35,893 31,317 24,310 15,076 6,493 6,493

13.0 SPECIAL SUPPORT EQUIPMENT 13.1 TRUCK, WATER WAGON/PUMP MODEL

ALL MAKES

CAPACITY (Gals.) 6,001-10,000 5,001-6,000 3,001-5,000 1,001-3,000

FLYWHEEL HORSEPOWER 864.0 720.0 564.0 552.0

OPERATED DRY 1,981 1,579 1,338 1,180

OPERATED HOUR 2,476 1,973 1,672 1,475

BARE MONTH 321,893 256,542 217,360 191,763

500-1,000

360.0

852

13.0 SPECIAL SUPPORT EQUIPMENT (Cont.) 13.2 TRUCK, FUEL, LUBRICATION & MECHANIC MODEL

Lube Truck w/ accessories, 4 dispenser & Up, 10 Wheeler Lube Truck w/ accessories, 3 dispenser, 6 Wheeler Wrecker Truck Mechanic Service Truck, w/ gas, Diesel Welding Machine Fuel Truck, 500-1000 Gal. w/ hoses, meters, pump * Volvo FL220, Fuel Truck, 13,000 liters, 4x2 13.3 SERVICE VEHICLES & PICK-UPS MITSUBISHI L300 Aluminum Van 2,500 CC w/ 4D56 Diesel, 2,205 kgs. L300 Chassis CA 2,500 CC w/ 4D56 Diesel Engine, 2,205 kgs. L300 Drop Side Pick-up w/ 2,500 CC 4D56 Diesel Engine 2,205 kgs. L300 8-Footer High Side Pick-up w/ Roof (Standard) with 2500 CC 4D56 Diesel Engine 2,205 kgs. L300 HSPUR 8 Footer Standard w/ anolok enclosure w/ 2500 CC 4D56 Diesel Engine 2,205 kgs. L300 Low Side Pick-up w/ 2500 CC w/ 4D56 Fuel Injected Turbo Charger L300 Versa Van De Luxe Diesel, 1992 5-Door, 2500 CC 4D56 Diesel Engine L300 Versa Van De Luxe Diesel, 1992 5-Door, 1500 CC 4D56 Diesel Engine L300 Versa Van De Luxe Diesel, 1992 5-Door, 2000 CC 4D56 Diesel Engine L300 Versa Van De Luxe Diesel, 1992 5-Door, 2.5 liter 4D56 Diesel Engine * L200, 1993

FLYWHEEL HORSEPOWER 300 220 220 220 220 220

BARE RATE PER DAY 8,497 5,695 5,400 5,400 8,413 10,637

BARE MONTH 172,601 115,687 109,681 109,681 170,885 216,073

46,778 43,890 46,778 46,778 47,408 45,780 56,648 58,065 56,280 47,288 72 72

37,586

*Current Models

13.0 SPECIAL SUPPORT EQUIPMENT (Cont.) 13.3 SERVICE VEHICLES & PICK-UPS (Cont.) MODEL

MITSUBISHI * Adventure GLX, 2.5 liter, Diesel Engine 5-Door 7-9 seater * Adventure GLs Sport, 2.5 liter, Diesel Engine 5-Door 9 seater * Strada GLX 4x2 Pick-up, 2.5 liter, Diesel Engine 4-Door, 5 seater * Strada GLX 4x4 Pick-up, 2.5 liter, Diesel Engine 4-Door, 5 seater * Strada GLX 4x4 Pick-up, 3.2 liter, Diesel Engine 4-Door, 5 seater * Montero Sport GLS SE 4x4 Pick-up, 3.2 liter Diesel Engine, 5-Door, 7seater Pajero Turbo Superwagon, 1991 4WD 2500 CC w/ 4D56 Fuel Injected Turbo Charger TOYOTA Fortuner V SUV, 4x4, 3.0 liter Diesel Engine 5-Door, 5 seater Fortuner G SUV, 4x2, 2.5 liter Diesel Engine 5-Door, 5 seater Hi-Ace Van GL Grandia Monotone 12, 2.5 liter Diesel Engine, 4-Door, 12seater HILUX Pick-up 4x2 E, 2.5 liter Diesel Engine 4-Door, 5 seater HILUX Pick-up 4x2 G, 2.5 liter Diesel Engine 4-Door, 5 seater HILUX Pick-up 4x4 G, 3.0 liter Diesel Engine 4-Door, 5 seater HILUX 4x4 SR5 HILUX 4x4 - 4 WHEEL DRIVE DLX

FLYWHEEL HORSEPOWER

BARE RATE PER DAY

BARE MONTH

73

47,712

136

50,860

136

54,978

136

67,208

158

74,474

161

101,721 85,995

163

102,811

102

87,674

102

86,281

102

60,367

102

63,394

60,828 55,796

*Current Models


FLYWHEEL HORSEPOWER

BARE RATE PER DAY

BARE MONTH

1,065

138,424

TOYOTA (Cont.) HILUX 4x2-XS HILUX 4x2 DOUBLE CAB PICK-UP (STD) Innova 2.5 E, AUV, 2.5 liter Diesel Engine 5-Door, 8 seater Land Cruiser Wagon 4200CC Revo DLX DSL 2003 Tamaraw FX 1996 Tamaraw FX 1993 FORD * Ranger Pick-up 4x2 XLT Trekker, 2.5 liter Diesel Engine, 4-Door, 5 seater * Ranger Pick-up 4x4 XLT Trekker, 3.0 liter Diesel Engine, 4-Door, 5 seater Ranger 4x4 * Everest SUV 4x2 XLS, 2.5 liter Diesel Engine 5-Door, 7 seater * Everest SUV 4x4 XLT, 3.0 liter Diesel Engine 5-Door, 7 seater Explorer Sport Trac 4x2 Explorer Sport Trac 4x4 F-150 Super Crew 4x4 Lariat HYUNDAI Grand Starex TCI GL, 2.5 Diesel Engine 4-Door Van, 12 seater Grand Starex TCI GLS, 2.5 Diesel Engine 4-Door Van, 10 seater Grand Starex CRDi VGT GL, 2.5 Diesel Engine 4-Door Van, 10 seater

40,812 38,017 134 80 80 80

57,944 105,959 39,356 45,465 29,734

141

58,793

156

80,287 51,155

141

75,685

156 205 205 220

97,482 72,623 86,657 89,396

101

74,958

101

82,829

174

89,490

*Current Models


HYUNDAI Grand Starex CRDi VGT GL, 2.5 Diesel Engine 4-Door Van, 12 seater Santa Fe CRDi VGT, 2.2 Diesel Engine 4-Door SUV 7 seater Santa Fe CRDi 4x4 VGT, 2.2 Diesel Engine 4-Door SUV 7 seater Tucson CRDi 4x2 SUV, 2.0 liter Diesel Engine 4-Door, 5 seater Tucson CRDi 4x4 SUV, 2.0 liter Diesel Engine 4-Door, 5 seater ISUZU Alterra 4x2 P. / S. Silver, 3.0 Dielsel Engine 5-Door SUV, 5-7 seater Alterra 4x2 S. Silver/S. Black, 3.0 Dielsel Engine 5-Door SUV, 5-7 seater Crosswind Xti, 2.5 Diesel Engine 5-Door AUV, 10 seater Crosswind XUV, 2.5 Diesel Engine 5-Door AUV, 10 seater Crewcab 4 Door Diesel D-Max Pick-up 4x2 LX, 3.0 Diesel Engine 4-Door, 5 seater D-Max Pick-up 4x2 LT 2.5 Diesel Engine 4-Door, 5 seater D-Max Pick-up 4x4 LS, 3.0 Diesel Engine 4-Door, 5 seater Pick-up 2 Door Diesel

FLYWHEEL HORSEPOWER

BARE RATE PER DAY

BARE MONTH

174

91,912

150

92,518

150

100,086

112

67,692

112

74,777

146

93,849

146

103,719

85

56,007

85

67,935 35,228

146

57,703

81

50,860 . 81,739 33,128

146

*Current Models


ISUZU (Cont.) Feugo, TRF54HDL-RLS Hilander, Crosswind XL GVW Hilander, Crosswind XTRM GVW Hilander, Crosswind XT GVW MAZDA B2200 Double Cab (Diesel) B2200 Single Cab (Diesel)

FLYWHEEL HORSEPOWER

70 70 70

BARE RATE PER DAY

BARE MONTH 31,578 36,339 43,552 38,017 55,440 52,448

* BT50 Pick-up 4x2, 2.5 liter Diesel Engine 4-Door, 5 seater * BT50 Pick-up 4x4, 3.0 liter Diesel Engine 4-Door, 5 seater NISSAN Patrol (loaded) Frontier 2000 Frontier 2.7S (4x2) Frontier 2.7E DLX II (4x2) New Edition Frontier 2.7E DLX II (4x2) Limited Edition Frontier 3.2 AT II (4x2) Pleasure Series Frontier III TD 27 Frontier 3.2 AT II (4x2) Limited Edition Frontier 3.2 MT II (4x4) Pleasure Series Frontier 3.2 MT II (4x4) Limited Edition Frontier 3.2 AT II (4x4) Pleasure Series Frontier 3.2 AT II (4x4) Limited Edition * Frontier Navara 4x2 Pick-up,2.5 liter Diesel Engine, 4-Door, 5 seater * Frontier Navara 4x4 Pick-up,2.5 liter Diesel Engine, 4-Door, 5 seater Safari CRLGY60

143

57,460

156

80,469

80 80 80 80 80

92,663 40,924 34,998 39,079 41,204 43,831 44,745 45,285 53,112 54,230 55,068 55,907

145

63,273

174

81,680 82,648

85 80 80 80 80

*Current Models


NISSAN * Urvan Esacapde Van, 2.6 liter, Diesel Engine 4-Door, 12 seater * Urvan Esacapde Van, 3.0 liter, Diesel Engine 4-Door, 9 seater Pathfinder, 4x4 (loaded) Power Pick-up (loaded) Double Cab-Classic, (Bare) DAIHATSU 2 Door 4WD KIA Sorento EX CRDi, 2.5 liter, Diesel Engine 5-Door, 5 seater Sportage LX 4x2 CRDi, 2.0 liter, Diesel Engine 5-Door SUV, 5 seater Sportage LX 4x4 CRDi, 2.0 liter, Diesel Engine 5-Door SUV, 5 seater Ceres Pick-up 4WD Ceres Pick-up SUZUKI Samurai Long Body Resin Top Samurai Single Cab Pick-up Vitara 5 Door Wagon JLX Auto. Transmission Vitara 5 Door Wagon JLX Manual Transmission 14.0 MISCELLANEOUS EQUIPMENT 14.1 BORING MACHINE - HORIZONTAL RICHMOND 4-71, 300 Tons Capacity RICHMOND 4-71, 600 Tons Capacity ISEKI MEPCB 900, O.D.- 1100 mm. Sheild Length - 2562 mm.

FLYWHEEL HORSEPOWER

BARE RATE PER DAY

BARE MONTH

84

64,120

105

92,518 71,190 61,898 52,868 29,715

138

97,482

110

73,566

110

82,648 28,823 26,775 27,115 25,885 47,130 44,670

4,713 9,114

117,825 227,842

14,826

370,661

FLYWHEEL HORSEPOWER

BARE RATE PER DAY

BARE MONTH

73.0 75.0

8,805 11,006

220,127 275,159

5.0

2,269 1,247

56,731 31,186

4.0 4.0

673 1,010

16,835 25,253

176 189

4,400 4,715

*Current Models

14.0 MISCELLANEOUS EQUIPMENT (Cont.) MODEL

14.2 BREAKERS, PAVEMENT AND ROCK DRILLS ARROW MASTER (CRACK & SEAT) D500 HJ1250R HITACHI HS 300, Reverse Circulation Drill Electric Driven - 55 KW PIONJAR 120, Rock Drill/Breaker, 20 cfm Petrol Driven WACKER PORTABLE PETROL BREAKER BHF30S BH23 14.3 CHAINSAW HUSQVARNA 162/266 w/o Blade 2100 CD w/o Blade

14.4 HOLLOW BLOCK MAKING MACHINES DORA WERK UP1000, Hollow Blocks Press Machines, Electric Driven 14.5 METAL MUNCHER MACHINE CENTRAL ELECTRIC CO. MM90C, Electric Driven 14.6 PAINT STRIPPING MACHINE Gas or Diesel Driven w/ spray gun 14.7 SCALE, TRUCK CARDINAL, Portable, heavy duty, 30 Tons capacity 14.8 SEALER, JOINT Gas or Diesel Driven w/ Hot or Cold spray nozzle 14.9 STEAM CLEANER CHRISTANINI C-100, 1450 psi, Electric driven 220V/60 cycles 14.10 TRACTOR SKIDDER FMC 220

4,178

104,451

711

17,765

440

10,992

409

10,226

451

11,273

139

3,466

5,604

140,109

DAILY

WEEKLY

MONTHLY

656 486 559 608 656 681

2,625 1,944 2,236 2,431 2,625 2,722

7,875 5,833 6,708 7,292 7,875 8,167

3.50 5.00 5.00 1.50

486 535 1,094 851

1,944 2,139 4,375 3,403

5,833 6,417 13,125 10,208

3.50 5.50 9.00 9.00 13.00

1,382 1,268 1,408 1,508 1,706

5,526 5,073 5,632 6,033 6,825

16,579 15,218 16,897 18,098 20,475

3,150 3,544 1,546

12,600 14,175 6,183

37,800 42,525 18,550

AIR CONSUMPTION (lpm)

DAILY

WEEKLY

MONTHLY

450 850 1,400 2,500

788 875 1,230 2,273

3,150 3,500 4,922 9,090

9,450 10,500 14,766 27,271

FLYWHEEL HORSEPOWER

DAILY

WEEKLY

MONTHLY

4.50 5.00 8.00

1,575 1,838 2,450

6,300 7,350 9,800

18,900 22,050 29,400

23.00 25.00

9,450 12,250

37,800 49,000

113,400 147,000

Electric 5.00 5.00

4,277 8,264 1,116

17,106 33,056 4,463

51,319 99,167 13,388

*Current Models

14.0 MISCELLANEOUS EQUIPMENT (Cont.) 14.11 CONCRETE VIBRATORS MACHINE DESCRIPTION

F. HORSEPOWER / (AMPERES)

HEAD DIAMETER Flexible Shaft Type, 4-6 Meters Shaft 1" (25mm) 1 1/4" (32mm) 1 1/2" (38-40mm) 1 3/4" (45-48mm) 2" (50mm) 2 1/4" (57-60mm) DRIVE UNIT Gasoline Drive Unit Gasoline Drive Unit Diesel Drive Unit Electric Drive Unit Note: Choose vibrator head/shaft and add to choice of drive unit. MOTOR-IN-HEAD TYPE W/ SAFETY VOLTAGE 4-6 Meters Shaft 1 1/8" (30mm) 1 1/2" (40mm) 1 3/4" (45mm) 2" (50mm) 2 1/2" (60mm) DRIVE UNIT Gasoline Drive Unit (48 volts, 3 sockets) Electric Drive Unit (3 phase, 3 sockets) Electric Drive Unit (1 phase, 2 sockets) Note: Choose vibrator head/shaft and add to choice of drive unit. Total nos. of vibrators amperes of the drive unit.

30.10 28.00 27.00 must not exceed maximum

14.0 MISCELLANEOUS EQUIPMENT (Cont.) 14.11 CONCRETE VIBRATORS (Cont.) MACHINE DESCRIPTION PNEUMATIC TYPE, 2 METERS SHAFT 1" - 1 1/2" (25-38mm) 1 3/4" - 2 1/2" (45-60mm) 3 -3 1/2" (75-90mm) 4 - 5 1/2" (100-140mm) Note: Air Compressors, hoses and couplers not included. 14.12 CONCRETE TROWELS MACHINE DESCRIPTION DIAMETER

NO. OF BLADES

Walk-behind 24" - 30" (610 - 762mm) 4 4 24" - 30" (914mm) 4 4 24" - 30" (1168-1219mm) 4 4 Ride-on 36" (914mm) 8 8 46" - 48" (1168-1219mm) 8 8 Note: Blades and other accessories not included. 14.13 CONCRETE SAWS (GASOLINE) BLADE DIAMETER CUTTING DEPTH 5" Early Entry (Dry) 1" 8" - 10" Early Entry (Dry) 1 3/16" 12" Manual 3 3/4"

14.0 MISCELLANEOUS EQUIPMENT (Cont.) 14.13 CONCRETE SAWS (GASOLINE) (Cont.) MACHINE DESCRIPTION

BLADE DIAMETER CUTTING DEPTH 14" Manual 4 3/4" 14" Manual 5 3/4" 16-18" Self-propelled 6 3/4" 20" Self-propelled 7 3/4" 26" Self-propelled 10 3/4" 30" Self-propelled 11 3/4" 36" Self-propelled 14 3/4" 48" Self-propelled 20" Note: Blades and other accessories not included. 14.14 REBAR CUTTER ALL ELECTRIC MODELS

MAXIMUM REBAR DIAMETER Grade 40 13 mm 16 mm 20 mm 25 mm 32 mm 32 mm 42 mm 55 mm 60-70 mm 14.15 REBAR BENDER 13 mm 16 mm

FLYWHEEL HORSEPOWER

DAILY

WEEKLY

MONTHLY

7.50 9.00 13.00 20.00 25.00 65.00 65.00 65.00

1,339 1,562 2,789 6,263 6,604 11,953 12,431 15,141

5,355 6,248 11,156 25,054 26,416 47,812 49,725 60,562

16,065 18,743 33,469 75,161 79,249 143,437 149,175 181,687

PHASE

DAILY

WEEKLY

MONTHLY

Single Single Single Single Single Three Three Three Three

1,125 1,266 1,336 1,758 2,531 3,094 3,516 16,875 21,094

4,500 5,063 5,344 7,031 10,125 12,375 14,063 67,500 84,375

13,500 15,188 16,031 21,094 30,375 37,125 42,187 202,500 253,125

Three Three

2,250 2,531

9,000 10,125

27,000 30,375

PHASE

DAILY

WEEKLY

MONTHLY

7.50 9.00 13.00 20.00 25.00 65.00 65.00 65.00

1,339 1,562 2,789 6,263 6,604 11,953 12,431 15,141

5,355 6,248 11,156 25,054 26,416 47,812 49,725 60,562

16,065 18,743 33,469 75,161 79,249 143,437 149,175 181,687

PHASE

DAILY

WEEKLY

MONTHLY

Single Single Single Single Single Three Three Three Three

1,125 1,266 1,336 1,758 2,531 3,094 3,516 16,875 21,094

4,500 5,063 5,344 7,031 10,125 12,375 14,063 67,500 84,375

13,500 15,188 16,031 21,094 30,375 37,125 42,187 202,500 253,125

Three Three

2,250 2,531

9,000 10,125

27,000 30,375

PHASE

DAILY

WEEKLY

MONTHLY

Three Three Three Three

2,812 3,516 4,219 25,312

11,250 14,063 16,875 101,250

33,750 42,187 50,625 303,750

Three Three Three

3,797 4,641

10,687 15,188 18,562

32,062 45,563 55,687

14.0 MISCELLANEOUS EQUIPMENT (Cont.) 14.14 REBAR BENDER (Cont.) MACHINE DESCRIPTION 25 mm 32 mm 42 mm 60-70 mm 20" Self-propelled 7 3/4" 26" Self-propelled 10 3/4" 30" Self-propelled 11 3/4" 36" Self-propelled 14 3/4" 48" Self-propelled 20" Note: Blades and other accessories not included. 14.14 REBAR CUTTER ALL ELECTRIC MODELS

MAXIMUM REBAR DIAMETER Grade 40 13 mm 16 mm 20 mm 25 mm 32 mm 32 mm 42 mm 55 mm 60-70 mm 14.15 REBAR BENDER 13 mm 16 mm 14.0 MISCELLANEOUS EQUIPMENT (Cont.) 14.15 REBAR BENDER (Cont.) MACHINE DESCRIPTION 25 mm 32 mm 42 mm 52-70 mm 14.16 REBAR CICULAR BENDER 22 mm 32 mm 42 mm

52 mm

Three

28,125

112,500

337,500

MACHINE DESCRIPTION

H.P.

GENERATOR (kw)

DAILY

WEEKLY

MONTHLY

No. of Lights Tower Height 30 ft. 4 x 1000 watts 30 ft. 6 x 1000 watts 28 ft. 4 x 1000 watts 28 ft. 4 x 1000 watts 12 ft. 4 x 400 watts 12 ft. 2 x 400 watts 14.18 ARROW BOARDS (BATTERY POWERED/SOLAR-ASSISTED)

10.50 13.60 10.50 10.50 5.00 5.00

6.00 8.00 6.00 5.00 2.70 2.40

5,797 7,729 4,831 4,348 2,625 2,187

23,187 30,917 19,323 17,391 10,500 8,750

69,563 92,750 57,969 52,172 31,500 26,250

DAILY

WEEKLY

MONTHLY

4,480 4,760

17,919 19,041

53,756 57,122

WATTAGE/BULB

DAILY

WEEKLY

MONTHLY

50 75 75

4,266 4,501 4,911

17,065 18,003 19,644

51,194 54,008 58,931

PRESSURE (bar)

DAILY

WEEKLY

MONTHLY

105-140 90-130

1,749 1,250

6,995 4,999

20,985 14,996

100-140 105-140 100-120 105-140 100-140

923 1,471 1,341 1,829 1,676

3,690 5,882 5,364 7,315 6,705

11,071 17,647 16,093 21,945 20,116

21

100-120

2,743

10,973

32,918

FLOW RANGE (lpm)

PRESSURE (bar)

DAILY

WEEKLY

MONTHLY

7-140 70-140 105-140 140 50-140

1,669 1,120 3,028 1,745 1,676

6,675 4,480 11,902 6,980 6,705

20,025 13,441 35,706 20,939 20,116

105-140

1,829

7,315

21,945

140 140 140 175 140

923 1,471 1,341 1,829 1,676

3,690 5,882 5,364 7,315 6,705

11,071 17,647 16,093 21,945 20,116

2,771

11,803

33,250

14.17 TOWER LIGHTS

MACHINE DESCRIPTION

WATTAGE/BULB No. of Lights 15 25

Type of Bulbs PAR 46 Halogen PAR 46 Halogen

Three Three

14.0 MISCELLANEOUS EQUIPMENT (Cont.) 14.18 ARROW BOARDS (BATTERY POWERED/SOLAR-ASSISTED) (Cont.) MACHINE DESCRIPTION Type of Bulbs (Cont.) PAR 46 LED PAR 46 LED PAR 46 LED 14.19 HYDRAULIC TOOLS

No. of Lights (Cont.) 15 25 25

MACHINE DESCRIPTION

WEIGHT

(kg)

14.19.1 CHIPPING HAMMERS Stanley CH18 Maruzen BH112 Note: Breaking Tools not Included.

Oil Flow Range (lpm) 26-34 20-25

11 11 14.19.2 PAVEMENT BREAKERS

Maruzen BH051 Stanley BR67 Maruzen BH230 Stanley BR72 Maruzen BH280 Note: Breaking Tools not Included.

Oil Flow Range (lpm) 9 26-34 15-30 26-34 20-30

15.50 30 23 27 28 14.19.3 ROCK DRILL

Maruzen MHD20 (Drill Bit not included)

Oil Flow Range (lpm) 20-25

14.0 MISCELLANEOUS EQUIPMENT (Cont.) 14.19 HYDRAULIC TOOLS (Cont.) MACHINE DESCRIPTION

14.19.4 SUBMERSIBLE PUMPS

Stanley SM22 Stanley SM23 Stanley TP04 Stanley TP08 Maruzen PH301 Note: Discharge hose not included

DISCHARGE OUTPUT Diameter (lpm) 63.50 1890 63.50 1420 100 3000 101 3000 75 1200

30-45 30-57 45-60 26-38 15-30 14.19.5 POST DRIVER

Stanley PD45

CAPACITY 667 mm channel/round 44 mm square

26-34 14.19.6 POWER UNIT

HORSEPOWER Stanley HP-1 9.0 Stanley HP-1 Diesel 19.0 Stanley HPR2 18.0 Maruzen UH051 5.0 Maruzen MHP100 10.0 Power unit includes couplers and extension hudraulic hoses.

30 30 30 9.50 25 14.19.7 CONCRETE CHAIN SAW

ICS 823H (Blades not included) 14.0 MISCELLANEOUS EQUIPMENT (Cont.) 14.19 HYDRAULIC TOOLS (Cont.)

MACHINE DESCRIPTION

PRESSURE (bar)

DAILY

WEEKLY

MONTHLY

26-34

70-140

1,940

7,758

23,275

FLYWHEEL HORSEPOWER

OPERATED HOUR

BARE MONTH

FLOW RANGE (lpm) 14.19.8 POWER SAW

CO23 (Blades not included

HORSEPOWER 356.0

15.0 PLANTS MAKE/MODEL/CAPACITY 15.1 AGGREGATE CRUSHERS PARKER Model 1208 portable, 100 tons per hour capacity, primary jaw secondary-roll crusher, w/ three product screen deck SVEDALA Model Jawmaster 1513HD primary crusher (885-116 MTPH, 250 HP) and H-8000 Hydrocone secondary crusher (665-1950 MTPH, 560 KW) complete w/ vibrating feeder, classifiers, screens and conveyor system. SVEDALA Model Jawmaster 1208HD primary crusher (550-720 MTPH, 150 HP) and H-6000 Hydrocone secondary crusher (255-715 MTPH, 315 KW.) w/ complete accessories. SVEDALA Model Jawmaster 1108D primary crusher (385-505 MTPH, 125/150 HP) and H-4000 Hydrocone secondary crusher (165-460 MTPH, 220 KW) w/ complete accessories. SVEDALA Model Jawmaster 1206HD primary crusher (325-525 MTPH, 100 HP) and H-3000 Hydrocone secondary crusher (105-265 MTPH, 150 KW) w/ complete accessories.

392,249

1,014.0 (combined)

1,903,557

580 (combined)

1,563,751

450.0 (combined)

1,332,085

304.0 (combined)

1,100,418

15.0 PLANTS (Cont.) MAKE/MODEL/CAPACITY 15.1 AGGREGATE CRUSHERS (Cont.) SVEDALA Model Jawmaster 907HD primary crusher (175-275 MTPH, 100 HP) and H-2000 Hydrocone secondary crusher (60-145 MTPH, 90 KW) w/ complete accessories. SVEDALA Model Jawmaster 806D primary crusher (160-250 MTPH, 75 HP) and H-2000 Hydrocone secondary crusher (60-145 MTPH, 90 KW.) w/ complete accessories. UNIVERSAL/ALLIS CHALMERS 70-90 cu.m./hr. rated capacity 30x42 primaryjaw crusher (100-440 MPTH, 125/150 HP) and 10x51 Hydrocone secondary crusher (215-350 MPTH, 220 KW) w/ complete accessories. AGGREGATE CRUSHERS complete w/ vibrating feeder, and secondary crushers, sand classifiers, screens and conveyor system. 15.2 ASPHALTIC CONCRETE PLANT, complete w/ central pugmill beater, dryer and conveyor system. Manual or automatic control system 15.3 CEMENT TREATED BASE PLANT, complete w/ central mixer manual and automatic control system. 15.4 CONCRETE BATCH PLANT, complete w/ cement silo, manual or automatic conttrol and de bay system. FASTWAY FBP, 3.60 cu.m./hr. ELBA WERK, EMM-45111-A-4, 38.25 cu.m./hr. C.S. JOHNSON SUPER, 630, 38.85 to 114.75 cu.m./hr. C.S. JOHNSON, 524, 84.15 cu.m./hr.

FLYWHEEL HORSEPOWER

OPERATED HOUR

BARE MONTH

222.0 (combined)

955,423

200.0 (combined)

741,172

450.0 (combined)

1,145,593 P8,098/month x Rated Capacity in Cu.M./Hr. P5,065/month x Rated Capacity in Cu.M./Hr. P6,035/month x Rated Capacity in Cu.M./Hr. P5,396/month x Rated Capacity in Cu.M./Hr.

119,700 154,360 546,000 456,750

15.0 PLANTS (Cont.) MAKE/MODEL/CAPACITY ROME BATCH PLANT, ORU, 130 cu.m./hr. ORU ROME 3P 50 / MB 3000 / WH /IU 94 Wet Type, 80-100 cu.m./hr. ARBAU EURO 80T, 80 cu.m./hr. w/ Batcher and Scraper, w/o cement silo ARBAU 880, 60 cu.m./hr. w/ Batcher and Scraper, w/o cement silo ELBA EMC 72, 72 cu.m./hr. w/ Batcher, Mixer & Scraper, w/o cement silo ELBA Mixer EM41, 40 cu.m./hr. w/ Batcher & Hopper, w/o cement silo ELBA Teka EM150, 15 cu.m./hr. w/ Batcher & Scraper w/o cement silo ELBA EMC35D, 35 cu.m./hr. w/ Batcher & Scraper, w/o cement silo ELBA EMC, 105 cu.m./hr. w/ Batcher & Scraper, w/o cement silo ELBA EMC, 85 cu.m./hr. w/ Batcher & Scraper, w/o cement silo ELBA EMM30, 30 cu.m./hr. w/ Batcher & Scraper, w/o cement silo ELBA EMM 15 cu.m./hr. w/ Batcher & Scraper, w/o cement silo ELBA EMM15, 15 cu.m./hr. w/ Batcher & Scraper, w/o cement silo ELBA EMM10, 10 cu.m./hr. w/ Batcher & Scraper, w/o cement silo IMER BTK 1000, 25 cu.m./hr. w/ Batcher & Scraper, w/o cement silo ROSS UNIPLANT, portable concrete batching plant, all in one batch plant-silo combination STETTER MOBILE PLANT M2 in-line Bunker, BHS Twin Shaft 3.0 cu.m. capacity Mixer / MC 150 Controller STETTER MOBILE PLANT 2 in-line Bunker, wet type, 80-100 cu.m./hr. 16.0 OFF-SHORE EQUIPMENT 16.1 DREDGER

FLYWHEEL HORSEPOWER 90

105 85

25

OPERATED HOUR

BARE MONTH 609,000 519,787 443,520 301,455 361,746 160,776 59,044 137,768 233,261 271,534 118,087 59,136 59,044 38,254 27,823 P6,527/mo. x Rated Capacity in Cu.M./Hr.

90

261,824 375,431

SUMITOMO, 10,500 cu.m./hr. capacity x 110 m. sq. .8382 m. discharge x 5000 m., discharge distance CUTTER SUCTION, 5,000 cu.m./hr. dredge pump cap., 0.6096 m. dredging depth, 2,000 m. max dredge distance, 600 mm discharge dia. CUTTER SUCTION, 10,000 cu.m./hr. dredge pump cap., 0.8382 m. dredging depth, 5,000 m. max dredge distance, 838 mm discharge dia. TRAILER SUCTION, 5,000 cu.m./hr. dredge pump cap., 0.4572 m dredging depth, 675 mm. discharge dia., 1,500 cu.m. hopper capacity. TRAILER SUCTION, 3,000 cu.m./hr. dredge pump cap., 0.3556 m dredging depth, 300 mm. discharge dia., 500 cu.m. hopper capacity. GRAB, SINGLE BUCKET, Self Propelled, 13 cu.m. bucket capacity 50 m. dredging depth, 1,000 cu.m. hopper capacity.

5,530.0

212,560

27,632,748

3,235.0

30,520

7,867,574

5,950.0

217,433

28,266,238

3,200.0

60,595

7,877,298

1,795.0

55,001

7,150,143

1,300.0

61,525

7,998,276

FLYWHEEL HORSEPOWER

OPERATED HOUR

BARE MONTH

124,556

16,192,319

3,843

499,642

3,937

511,797

4,853

630,916

1,030

133,848

825 537 496

107,250 69,784 64,493

5,874 5,647 4,390 2,901 2,072 1,951 1,603

763,620 734,162 570,713 377,091 269,412 253,682 208,351

OPERATED HOUR

BARE MONTH

16.0 OFF-SHORE EQUIPMENT (Cont.) MAKE/MODEL/CAPACITY

16.1 DREDGER (Cont.) GRAB, TWIN BUCKET, Towed, 9x2 cu.m. bucket capacity 30 m. dredging depth. 2,280.0 Note: For Cutter Suction/Bucket Dredgers, rental rates excluded cost of: a. pipelines, rubber sleeves and floaters c. support tugs and achor barges b. cutting tooth d. pipeline crew and support barges 16.2 CRANE BARGE Non-propelled barge, GW-319 tons, NW 313 tons, w/ mechanically operated crane, 60 tons capacity 275 Non-propelled barge, DWT-450 tons, w/ mechanically operated crane, 60 tons capacity 275 Non-propelled barge, DWT-650 tons, w/ mechanically operated crane, 60 tons capacity 275 16.3 HOPPER BARGE Non-propelled, Bottom dump barge, DWT-800 tons, 550 cu.m. net capacity 16.4 DECK BARGE, Non-Propelled, (LOA x B x D) meters Dimensions : 45.12x10.98x3.66 (1000 tons DWT) 35.50x9.85x3.05 (650 tons DWT 41.16x10.35x2.31 (600 tons DWT 16.5 TUGBOATS Dimensions : (LOA x B x D) meters 30.96x8.85x3.11 2100 29.05x8.2x3.10 2000 26.77x7.20x3.40 1500 22.87x6.71x3.05 850 21.96x6.31x2.49 550 15.24x4.73x1.91 500 13.30x4.65x1.85 500 16.0 OFF-SHORE EQUIPMENT (Cont.) MAKE/MODEL/CAPACITY

FLYWHEEL HORSEPOWER

16.6 MODULAR FLOAT SOIL MEC Piling platform, 500 tons capacity Piling platform, 1,119 tons capacity Dimension : 48.8 m. x 16.5 m. x 4.0 m. Note : OFF-SHORE EQUIPMENT RENTAL RATES are based on 8 hrs./day shift & 200 hrs./month basis. 15% premium on serve worksite condition not included. 17.0 CABLE STRINGING EQUIPMENT 17.1 CABLE PULLER TIMBERLAND EQUIPMENT 150.0 P-200-212D ATR, Trailer Mounted 150.0 P-200-212D ATR, Skid Base Mounted (CANTAMESA-ITALY), Model PU-157, Hydraulic. 250.0 17.2 CABLE TENSIONER TIMBERLAND EQUIPMENT T50-2M, Trailer-Mounted w/o Engine 23.0 (CANTAMESA-ITALY), Model TC-005 Hydraulic. 14 tons 17.3 REEL WINDER TIMBERLAND EQUIPMENT TRW60-36SL, Trailer-Mounted, Self-Loading w/o Engine (CANTAMESA-ITALY), Model RS-006, Trailer-Mounted 17.4 ROPE WINDER Trailer-Mounted w/ Isuzu Engine Model D500 95.0 17.5 SPLICING MACHINE SANWA TIKKI EC 410, Manually operated J60, Motorized equipped w/ gas Engine 7.0 17.6 CRIMPING TOOL - ELECTRIC CABLE STANLEY, Hydraulic, w/o power unit

501,426 1,653,188

1,243

88,698 81,068 161,590

409

43,966 53,196

124

13,637 16,159 7,499

2,747 6,391

CT10, 12 Ton Force, w/ Burndy Y35D Dies CT06, Anderson Head UC-6FTVR

2,603 2,839

17.0 CABLE STRINGING EQUIPMENT (Cont.) MAKE/MODEL/CAPACITY

FLYWHEEL HORSEPOWER

17.7 REEL CARIER, CABLE (CANTAMESA-ITALY), Model RS-004, Self-Loading, Hydraulic. 17.8 TRAVELLER, CABLE (CANTAMESA-ITALY), Model BL-009 17.9 STRINGING BLOCK (CANTAMESA-ITALY), Model BL-127 17.10 PULLING STEEL, ANTI TWISTING (CANTAMESA-ITALY), Model 52-016 17.11 JOINT CONNECTOR, FIXED (CANTAMESA-ITALY), Model SO-014 17.12 TRAVELLING GROUND DEVICE (CANTAMESA-ITALY), Model 18-004 17.13 ZOOM SAG SCOPE (CANTAMESA-ITALY), Model 51-019 17.14 DYNOMETER, HYDAULIC (CANTAMESA-ITALY), Model 10-18-18 17.15 SELF GRIPPING, CABLE (CANTAMESA-ITALY), Model CL-004 17.16 WIRE BASKET/MESHSOCK, Temporary (CANTAMESA-ITALY), Model SO-004 17.17 HYDRAULIC CUTTER, Wire rope/Cable (CANTAMESA-ITALY), Model 19-001, hand operated 17.18 HYDRAULIC COMPRESSOR (CANTAMESA-ITALY), Model 06-006, complete w/ power pack & connecting hoses and fittings 110 tons 17.19 SNATCH BLOCK, Hard line (CANTAMESA-ITALY), Model 31-004

OPERATED HOUR

BARE MONTH

312

40,612

95

12,298

109

14,157

194

25,168

90

11,726

101

12,156

121

15,730

110

14,300

103

13,442

94

12,155

118

15,301

290

37,752

92

12,012

OPERATED HOUR

BARE MONTH

18.0 OTHERS FLYWHEEL HORSEPOWER

MAKE/MODEL/CAPACITY 18.1 CHIP SPREADER, 12 feet wide whole 18.2 KOMATSU MOBILE CRUSHERS BR100JG-1 BR210JG-1 BR200S-1 BR350JG BR550JG 18.3 POWER BROOM, Towed Type with Engine 2 meters wide, 6 to 30 kms./hr. sweeping capacity 18.4 FORD TRUCK TIRE, IFDXX87U7-DVA SN 51Z07043

13,867 54.2 133.0 133.0 158.0 306.0

3,224 6,107 5,545 7,006 12,004

419,133 793,936 720,863 910,767 1,560,559

210.0

2,317

17,405 301,158

SECTION C EQUIPMENT SPECIFICATIONS PRODUCT TYPES CONTENTS TRACK TYPE TRACTORS WHEEL LOADERS SKID STEER LOADERS WHEEL TRACTOR SCRAPERS MOTOR GRADERS COMPACTORS CRANES HYDRAULIC EXCAVATORS / SHOVELS

PAGE 147 173 196 203 207 221 234 236

TRACK - TYPE TRACTORS

CATERPILLAR KOMATSU LIEBHERR

PAGE 148 159 171

BACKHOE -LOADERS ASPHALT PAVERS TRANSIT MIXERS / CONCRETE PUMPS ON/OFF-HIGHWAY TRUCKS AIR COMPRESSORS GENERATOR SETS / TOWER LIGHTS AGGREGATE CRUSHERS MISCELLANEOUS EQUIPMENT

CATERPILLAR TRACK-TYPE TRACTORS MODEL Flywheel Horsepower Operating Weight ( Powershift) ( Direct Drive ) (Hystat ) Engine Model

D3C Series 111

D3G XL

D3G LGP

D4D

Worksheet in Equipment Rental Rates

Recommend Documents