W I L S ON ON T O O L REPLACEMENT AMADA TOOLING A Cost Effective Solution for Long Lasting Durability
Terms and Conditions Credit
All orders are subject to the approval of our credit department. If you are a new account, please furnish us with a bank reference and three supplier references. A credit limit will be imposed on new accounts until credit has been established.
Payment
Terms are net 30 days.
Cancellation
In the event an order is cancelled, charge will be made to cover labour, materials and overheads.
Returned Material
A handling charge of 25% is made on all standard parts returned for credit. Written permission and shipping instructions must be obtained before the return of any material. Special tooling cannot be returned.
Claims
All claims for shortages must be made within 3 days of the invoice date.
Prices
Prices and specifications subject to change without prior notice. E & OE. All prices are exclusive of VAT.
Table of Contents
OptimaTM Coating UltimaTM Tool Steel
2 3
Fea eatu turres an and d Ben enefi efitts of Wil ilso son n Re Rep pla lace cem men entt Ama mad da Too ooli ling ng – Qu Quic ickk-A -Adj djus ustt A & B St Stat atio ions ns Features and Benefits of Wilson Replacement Amada Tooling – C, D & E Stations Wilson Amada Style Quick Adjust A Station
4 5 6
Wilson Amada Style A Station Wilson Amada Style Quick Adjust B Station Wilson Amada Style B Station
7 8 9
Wilson Amada Style C Station Wilson Amada Style D Station Wilson Amada Style E Station Wilson Amada ABS Tooling Wilson Wilso n Amada Style ABS Quick Adjust A Station
10 11 12 13 14
Wilson Amada Style ABS A Station Wilson Amada Style ABS Quick Adjust B Station
15 16
Wilson Amada Style ABS B Station Wilson Amada Style ABS C Station Wilson Amada Style ABS Quick Release C Station
17 18 19
Wilson Amada Style ABS D Station Wilson Amada Style ABS Quick Release D Station Wilson Amada Style ABS E Station
20 21 22
Wilson Amada Style ABS Quick Release E Station Close to Clamps Tooling DuraDie Replacement Insert Assembly
23 24 25 27
Punch Shims, Die Shims & Slug Ejectors Non Standard Keying
28 29
Shear Options Notes
30 31
Technology for Increased Tool Life
Optima Coating The New Standard in Tooling Performance! Optima™ is a proprietary TiCN (titanium carbo-nitride) coating that was custom engineered at our in-house coating facilities. faciliti es. It featur features es unique properties that significantly enhance tooling perfor performance. mance. This coating coating,, which is availab available le only to Wilson Tool Tool custo customers, mers, provides a level of surfa surface ce hardne hardness, ss, wear resist resistance ance and lubri lubricity city never befor before e associ associated ated with coated or uncoat uncoated ed punch press tooling.
Some of the many benefits that you will enjoy with our Optima™ Optima ™ coating include:
• More hits between sharpenings
Material Adhesion
Punch Life
Square mm of Material Adhesion (Galling) on Punch Tips Nibbling 12ga. (2.1mm) Aluminium
Nibbling 14ga. (1.9mm) 304 Stainless Steel
51.61mm
10,000,000
D2
Optima™
9,000,000
• Longer tool life • Increased wear resistance
Punch Life
8,000,000 s t i h f o r e b m u N
38.7mm
7,000,000 32.25mm
6,000,000 5,000,000
25.8mm
4,000,000
19.35mm
3,000,000
• Reduc Reduced ed adhesion (galling)
1,000,000
• Reduced corner breakdown • Impro Improved ved special tooling performance performance
TIN D2
6.45mm
M2
0mm
0
Using a 7.9mm Round Punch
Using a 6.3mm Square Punch (At 20,000 hits)
The white area indicates actual results achieved through three tool sharpenings of 0.25mm each. The complete graph indicates projected results with a total of 6mm removed for sharpening.
• Lower overall tooling costs • In-house coating facilities allow us to deliver faster and maintain total quality control
TIN
12.9mm
2,000,000
• Reduced slug pulling
M2
45.16mm
Number of Hits
Tip Wear
Number of Hits Before First Sharpening
Punch Tip Corner Wear
Nibbling 14ga. (1.9mm) 304 Stainless Steel
Nibbling 14ga. (1.9mm) 304 Stainless Steel 0.76mm
1,200,000 Optima™
0.64mm
1,000,000 s t i h f o r e b m u N
D2
r a e W r e n r o C f o t n u o m A
800,000 600,000 400,000 TIN
200,000 D2
0.5mm 0.38mm
M2
0.25mm 0.13mm
TIN
M2
0
0mm Using a 7.9mm Round Punch
Using a 6.3mm Square Punch (At 25,000 hits)
TECHN TE CHNOL OLOG OGY Y AT TH THE E CUT CUTTI TING NG ED EDGE GE
Technology for Increased Tool Life
Ultima Tool Steel Boost Punching Productivity! Productivity! Tool Steel for Longer Life When faced with demanding applications applications that requ require ire long-term wear resistance and toughness, turn to Wilson’s new Ultima™ Premium Tool Steel for HP thick turret tooling. Ultima punches and dies are engineered to increase wear resistance by up to 100% over conventional tool steels.
A New Level of Performance Ultima premium tool steel sets a new benchmark for durability durab ility and perfor performance. mance. Ultima punches and dies are designed design ed to dram dramatically atically improve tool life when punching abrasive abras ive materials and mater materials ials with high tensile stren strength. gth. Ultima excels in applications in which punches and dies wear quickly and is ideal for long running tasks. The premium steel from which Ultima punches and dies are made significantly reduces micro chipping on the cutting edge. This micro chipping is most often where cutting edge failure begins.
Remarkable Downtime Reductions With With up up to twi twice ce as long bet betwee ween n re-gr re-grind inds, s, Ult Ultima ima pre premiu mium m steel ste el sig signifi nificant cantly ly red reduce ucess dow downti ntime me and too tooll rep replac laceme ement nt cos costs. ts. Breaki Bre aking, ng, chip chippin ping, g, cra cracki cking, ng, too tooll fat fatigu igue e and and oth other er dow downti ntime me proble pro blems ms are min minimi imised sed,, pro provid viding ing long ter term m gains gains in productivit produ ctivityy and profit profitabilit abilityy. Ultima too Ultima tools ls are espec especiall iallyy use useful ful for the tough toughest est punc punch h press press applica app licatio tions, ns, but are are effectiv effective e in any job job.. Via Viabil bility ity can be determ det ermine ined d by con conduc ductin ting g a cos costt benefit benefit analysis analysis.. Maintenance and sharpening may differ from traditional tooling. Please check with your local Sales Engineer or the Salesdesk.
Features and Benefits of Wilson Replacement Amada Tooling
Quick-Adjust A & B Stations
•
•
Fast shim-free adjustment without removal from the guide
Extremely tough punch heads and canisters treated with Nitrex coating for greater strength, increased life and greater wear resistance •
•
Available for A and B Stations
Increased grind life. Fully adjustable over 6.35mm to maximise punch use •
•
Revitalise your existing tools. Give old tools a new lease of life!
Features and Benefits of Wilson Replacement Amada Tooling
C, D & E Stations
Built-in oiling system ensures thorough internal/external lubrication
Pre-loaded spring pack assembly
• • •
•
Push button punch length adjustment; (eliminating the need for shims)
Optima™ coated keys for superior wear resistance
Tapped for M-14 T-handle carry and extractor tool
50.8mm (C) and 88.9mm (D) station guide assemblies are keyed at 0°, 90° and 225°
Hardened steel guide for longer life
External keying for quick key position changes
•
• •
Available for either ‘Old Style®’ or Series 80®/90® style punches
Positive locking stripper plate retention •
Provides four times more grind life than traditional old style guide assemblies
•
Uses standard stripper plates
• •
•
Wilson Amada Style Quick Adjust A Station Up to 12.7mm ‘A‘ Dimension*
URETHANE PLUG (2 Req’d) Cat. No. 13868
PUNCH HEAD Cat. No. 13395
••
• •
SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 970476
PUNCH HEAD RETAINER Cat. No. 13396
•
SPRING PACK ASSEMBLY Cat. No. 13394
•
NYLON WIRE Cat. No. 24437
•
SPRING Cat. No. 24291
CANISTER Cat. No. 13398
•
•
RETAINING RING Cat. No. 24290
GUIDE (See below)
•
Notes † Slug Hugger® dies must be ordered punch size plus clearance. clearan ce. Size restrict restrictions ions apply. Slug Hugger 2 available availab le on request. Contact Contact Sales Desk for further information.
STRIPPER (See below)
•
* ‘A’ Dimension = longest distance across shape.
DOWEL PIN (3/16 x .312) .312) Cat. No. No. 6013
• Maximum Material Thickness 3.81mm
Description
Cat. No No.
Punch & Guide Assembly
• Round • Shape Fitted • Optima® Add On
13425 13427 –
Punches
• Round • Shape • Optima® Add On
2183 2182 –
• Round • Shape (0°) • Shape (0° & 45°) • Shape (0° & 90°)
13065 13066 13067 13068
Stripper
• Round • Shape Fitted
13044 13143
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2192 1808 2193 13801 -
Guides
12.7mm (A) Station Add Ons
Price
Add ons for Rounds Punch
Small Diameter
Die
Stripper
N/C N/C
0.79 - 1.50mm Clearance < 0.10mm Add ons for Shapes Small Widths
Punch
Die
Stripper
0.79 - 1.0mm
N/C
Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back back taper, or no back taper. taper.
Stubby Style (A) Station Add Ons Note: Must use stubby style die and guide with stubby style punch Use Standard Punch and Die Price Plus:
Punch Round (2.3mm max dia.) add Shape add
Standard Shapes & Key Locations (Die View)
Die Round add Shape add
Wilson Amada Style A Station Up to 12.7mm ‘A‘ Dimension*
URETHANE PLUG Cat. No. 13868
• •
PUNCH HEAD ASSEMBLY Cat. No. 13864
•
SOCKET HEAD CAP SCREW Cat. No. 970476 SPRING Cat. No. 13079
•
•
SPRING SUPPORT Cat. No. 13078
GUIDE (See below)
•
Notes † Slug Hugger® dies must be ordered punch size plus clearance. Size restrictions apply. Slug Hugger 2 available availab le on request request.. Contact Sales Desk for further information.
STRIPPER (See below)
•
* ‘A’ Dimension = longest distance across shape.
DOWEL PIN (3/16 x .312) .312) Cat. No. No. 6013
• Maximum Material Thickness 3.81mm
Description
Cat. No No.
Punch & Guide Assembly
• Round • Shape Fitted • Optima® Add On
13057 13059 –
Punches
• Round • Shape • Optima® Add On
2183 2182 –
• Round • Shape (0°) • Shape (0° & 45°) • Shape (0° & 90°)
13065 13066 13067 13068
Stripper
• Round • Shape Fitted
13044 13143
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2192 1808 2193 13801 -
Guides
12.7mm (A) Station Add Ons
Price
Add ons for Rounds Punch
Small Diameter
Die
Stripper
0.79 - 1.50mm
N/C
Clearance < 0.10mm
N/C Add ons for Shapes
Small Widths
Punch
Die
Stripper
0.79 - 1.0mm
N/C
Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back taper, taper, or or no back taper. taper.
Stubby Style (A) Station Add Ons Note: Must use stubby style die and guide with stubby style punch Use Standard Punch and Die Price Plus:
Punch Round (2.3mm max dia.) add Shape add
Standard Shapes & Key Locations (Die View)
Die Round add Shape add
Wilson Amada Style Quick Adjust B Station Up to 31.75mm ‘A‘ Dimension*
URETHANE PLUG (2 Req’d) Cat. No. 13868
•
• •
SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 6333
PUNCH HEAD Cat. No. 13400
•
PUNCH HEAD RETAINER Cat. No. 13401
•
RETAINING RING Cat. No. 974202
• •
SPRING Cat. No. 30 RETAINING RING Cat. No. 24294
•
•
SPRING PACK ASSEMBLY Cat. No. 13399 CANISTER Cat. No. 13402
• •
SPRING SUPPORT Cat. No. 13403
O-RING Cat. No. 24295 GUIDE (See below)
• STRIPPER (See below)
• DOWEL PIN (3/16 x .345) .345) Cat. No. No. 6431
• Maximum Material Thickness 6.35mm
Description Punch & Guide Assembly Punches Guides
Stripper Dies
Cat. No No.
• Round • Shape Fitted • Optima® Add On • Round • Shape • Optima® Add On • Round • Shape (0°) • Shape (0° & 45°) • Shape (0° & 90°) • Round • Shape Fitted • Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Sh Shap apee (0 (0°° & 45° 45°)) Pos osititiv ivee • Shape (0° & 45°) Negative • Ultltiima ma™ ™ Ad Addd On (Rou ound nd)) • Ultltiima ma™ ™ Ad Addd On (Sh Shap ape) e)
13431 13433 – 2185 2184 – 13413 13414 13415 13416 1890 1917 2194 2021 2195 13804 22633 226 2264 -
Price
(B) Station Add Ons Add ons for Rounds Punch
Small Diameter
Die
Stripper
N/C N/C
0.79 - 1.50mm Clearance < 0.10mm Add ons for Shapes Small Widths 0.79 - 1.0mm ‘A’ Dimension* < 11.10mm Clearance < 0.10mm Add
Punch
Die
Stripper
N/C
N/C
N/C N/C
to round or shape punch punch for extra straight before before radius, extra back taper, taper, or no back taper. taper.
Notes † Slug Hugger® dies must be ordered punch size plus clearan clearance. ce. Size restrictions apply.. Slug Hugger 2 available on request. Contact Sales Desk for further apply information. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style B Station Up to 31.75mm ‘A‘ Dimension*
PUNCH HEAD ASSEMBLY Cat. No. 13866
•
SPRING COVER Cat. No. 2732
•
SPRING SUPPORT ASSEMBLY Cat. No. 13078
•
SPRING Cat. No. 35122
•
GUIDE (See below)
•
STRIPPER (See below)
• DOWEL PIN (3/16 x .345) .345) Cat. No. No. 6431
• Maximum Material Thickness 6.35mm
Description Punch & Guide Assembly Punches Guides
Stripper Dies
Cat. No No.
• Round • Shape Fitted • Optima® Add On • Round • Shape • Optima® Add On • Round • Shape (0°) • Shape (0° & 45°) • Shape (0° & 90°) • Round • Shape Fitted • Round Slug Hugger ®† • Round Standard®† • Shape Slug Hugger • Shape Standard • Sh Shap apee (0 (0°° & 45 45°) °) Po Posi sititive ve • Shape (0° & 45°) Negative • Ultltiima ma™ ™ Ad Addd On (Rou ound nd)) • Ultltiima ma™ ™ Ad Addd On (Sh Shaape pe))
13090 13092 – 2185 2184 – 13413 13414 13415 13416 1890 1917 2194 2021 2195 13804 2263 22 63 2264 – –
(B) Station Add Ons
Price
Add ons for Rounds Punch
Small Diameter
Die
Stripper
N/C N/C
0.79 - 1.50mm Clearance < 0.10mm Add ons for Shapes Small Widths 0.79 - 1.0mm ‘A’ Dimension* < 11.10mm Clearance < 0.10mm Add
Punch
Die
Stripper
N/C
N/C
N/C N/C
to round or shape punch punch for extra straight before before radius, extra back back taper, or or no back taper. taper.
Notes † Slug Hugger® dies must be ordere ordered d punch size plus clearance. Size restrictions apply.. Slug Hugger 2 available on request. Contact Sales Desk for further apply information. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style C Station STRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS Up to 50.8mm ‘A‘ Dimension*
O-RING Cat. No. 972430
•
ADJUSTMENT PUSH BUTTON Cat. No. 10539
RETAINING RING Cat. No. 972441
•
•
•
•
SPRING Cat. No. 972396
• •
•
•
SPRING COVER Cat. No. 5693
DISC SPRING (12 Req’d) Cat. No. 5744
•
DRIVER ASSEMBLY
ADJUSTMENT LOCKING BALL Cat. No. 972420
•
Cat. No. 5729 DRIVER Cat. No. 5736
ADJUSTMENT SHAFT Cat. No. 5735
•
WAVE SPRING Cat. No. 971692
•
•
•
•
SPRING SUPPORT Cat. No. 5008
•
• •
•
PUNCH HOLDER Cat. No. 5556
•
•
RETAINING RING Cat. No. 5746
•
SOCKET HEAD CAP SCREW (2 Req’d) (Spl. M5 x .8 Cone Pt.) Cat. No. 5197
ANTI-LOCK SHIM Cat. No. 5412 DISC SPRING (2 Req’d) Cat. No. 971690
LOCK WASHER (2 Req’d) Cat. No. 2112
URETHANE (3/32 Sq. x 27/64) (Pkg of 50) Cat. No. 6116 SOCKET HEAD CAP SCREW (M12 x 40mm) Cat. No. 6605
SOCKET HEAD CAP SCREW
(M3 x 12mm) Cat. No. 6326 LOCK WASHER Cat. No. 6327
•
•
GUIDE Cat. No. 5420
•
PUNCH HOLDER KEY
Cat. No. 5373 GUIDE STRIPPER RING Cat. No. 5035
SPECIAL SCREW Cat. No. 429
Maximum Material Thickness 6.35mm
Description Guide Assembly
Punches
Strippers Dies
Cat. No No.
• Standard • Standard (LVD) • Standard WLS ® • Standard WLS® (LVD)
5583 35191 5592 35193
• Round • Shape • Optima® Add On
1933 1934 –
• Round • Shape
1848 1854
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2196 1850 2197 13807 – –
50.8mm (C) Station Add Ons
Price
Add ons for Rounds Punch
Small Diameter < 25.4mm Clearance < 0.10mm
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C
N/C N/C
Add ons for Shapes Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension* < 29.21mm 29.22 - 31.72 Clearance < 0.10mm Add
to round or shape shape punch for for extra straight straight before before radius, us, extra extra back taper, or no back taper.
Notes Standard guide assys. are keyed for shapes at 0°, 90° and 225°. All punches will be shippe shipped d with no shear unless specified. specified. †Slug Hugger® dies must be ordered punch size plus clearance . Size restric restrictions tions apply. Slug Hugger 2 available on request. Cont Contact act Sal Sales es Des Deskk for furt further herinf inform ormatio ation. n. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style D Station STRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS Up to 88.9mm ‘A‘ Dimension* •
O-RING Cat. No. 972430
•
•
ADJUSTMENT PUSH BUTTON Cat. No. 5737 SPRING COVER Cat. No. 5423
•
RETAINING RING Cat. No. 972441
•
SPRING Cat. No. 972396
• •
•
•
•
DISC SPRING (7 Req’d) Cat. No. 5449
ADJUSTMENT LOCKING BALL Cat. No. 972420
•
ADJUSTMENT SHAFT Cat. No. 5739
•
• •
WAVE SPRING Cat. No. 971692
•
DRIVER Cat. No. 5740
• •
SOCKET HEAD CAP SCREW (2 Req’d) (Spl. M5 x .8 Cone Pt.) Cat. No. 5197
•
•
PUNCH HOLDER Cat. No. 5558
DRIVER ASSEMBLY Cat. No. 5730
LOCK WASHER (2 Req’d) Cat. No. 2112
ANTI-LOCK SHIM Cat. No. 5413
•
•
• •
SPRING SUPPORT Cat. No. 5738
URETHANE (3/32 Sq. x 27/64 (pkg of 50) Cat. No. 6116
RETAINING RING Cat. No. 5747 PUNCH HOLDER KEY Cat. No. 1862
SPRING DISC (2 Req’d) Cat. No. 971690
•
LOCK WASHER (2 Req’d) Cat. No. 2112
SOCKET HEAD CAP SCREW (M12 x 50mm) Cat. No. 970467 •
GUIDE Cat. No. 5430
SOCKET HEAD CAP SCREW (2 Req’d) (M5 x 12mm) Cat. No. 6110 GUIDE STRIPPER RING Cat. No. 5036
•
SPECIAL SCREW Cat. No. 429
Maximum Material Thickness 6.35mm
Description
Cat. No No.
Guide Assembly
• Standard • Standard (LVD) • Standard WLS® • Standard WLS® (LVD)
5584 35198 5593 35200
Punches
• Round • Shape • Optima® Add On
1937 1938 –
• Round • Shape
1864 1869
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2198 1865 2199 13810 – –
Strippers Dies
88.9mm (D) Station Add Ons
Price
Add ons for Rounds Punch
Small Diameter 48.26mm 48.27 - 50.77mm Clearance < 0.10mm
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C N/C
N/C N/C N/C
Add ons for Shapes Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension* < 48.26mm 48.27 - 50.77mm Clearance < 0.10mm Add
to round or shape punch for extra straight before before radius, extra back back taper, or no back taper. taper.
Notes Standard guide assys. are keyed for shapes at 0˚, 90˚ & 225˚. 1.6mm Rooftop shear is given to all punches with 'A' dimension greater than 50.8mm, and width greater than 6.35mm, at no extra charge. All punches 6.35mm and under in width will be shipped with no shear unless specified.
Standard Shapes & Key Locations (Die View)
† Slug Hugger® dies must be ordered punch size plus clearance. Size restrictions apply. Slug Hugger 2 available on request. Contact Sales Desk for further information. * ‘A’ Dimension = longest distance across shape.
Wilson Amada Style E Station STRIPPER RETAINED WITH WIRE LOCK RING OR STRIPPER CLIPS Up to 114.3mm ‘A‘ ‘A‘ Dimension*
O-RING Cat. No. 972430
• •
•
•
RETAINING RING Cat. No. 972441
•
•
ADJUSTMENT PUCH BUTTON Cat. No. 5737
•
SPRING Cat. No. 972396
•
•
•
SPRING COVER Cat. No. 5423
DISC SPRING (7 Req’d) Cat. No. 5449
ADJUSTMENT LOCKING BALL Cat. No. 972420 ADJUSTMENT SHAFT Cat. No. 5739 LIFTER PIN (4 Req’d) Cat. No. 5209
•
DRIVER Cat. No. 5742
•
•
•
•
•
•
RETAINING RING Cat. No. 5747
•
•
SOCKET HEAD CAP SCREW (4 Req’d) (Spl M5 x 13.39mm Cone Pt.) Cat. No. 5210 WAVE SPRING Cat. No. 971692
DRIVER ASSEMBLY Cat. No. 5731
SPRING SUPPORT Cat. No. 5741 •
•
PUNCH HOLDER KEY Cat. No. 1862
•
•
URETHANE (3/32 Sq. x 27/64) (Pkg of 50) Cat. No. 6116
•
LOCK WASHER (2 Req’d) Cat. No. 2112 SOCKET HEAD CAP SCREW (2 Req’d) (M5 x 12mm) Cat. No. 6110
ANTI-LOCK SHIM Cat. No. 5413
GUIDE Cat. No. 5438
PUNCH HOLDER Cat. No. 5560 •
DISC SPRING (2 Req’d) Cat. No. 971690
•
SOCKET HEAD CAP SCREW (M12 x 50mm) Cat. No. 970467 GUIDE STRIPPER RING Cat. No. 5037
SPECIAL SCREW Cat. No. 429
Maximum Material Thickness 6.35mm
Description
Cat. No No.
Guide Assembly
• Standard • Standard WLS®
5585 5594
Punches
• Round • Shape • Optima® Add On
1941 1942 –
Strippers
• Round • Shape
Dies
• Round Slug Hugger † • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ultltiima ma™ ™ Ad Addd On (Rou ound nd)) • Ultltiima ma™ ™ Ad Addd On (Sh Shaape pe))
114.3mm (E) Station Add Ons
Price
Add ons for Rounds
Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension* < 86.36mm 86.37 - 88.87mm Clearance < 0.10mm Add
2200 1878 2201 13817 – –
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C N/C
N/C N/C N/C
Add ons for Shapes
1877 1882 ®
Punch
Small Diameter < 86.36mm 86.37 - 88.87mm Clearance < 0.10mm
to round or shape punch punch for extra straight before before radius, extra back taper, taper, or or no back taper. taper.
Notes Standard guide assys. are keyed for shapes at 0˚ & 90˚. 1.6mm Rooftop shear is given to all punches with 'A' dimension greater than 50.8mm, and width greater than 6.35mm, at no extra charge. All punches 6.35mm and under in width will be shipped with no shear unless specified.
Standard Shapes & Key Locations (Die View)
† Slug Hugger® dies must be ordered punch size plus clearance. Size res restric trictio tions ns app apply ly.. Slu Slug g Hugger Hug ger 2 ava availa ilable ble on requ request est.. Con Contac tactt Sales es Desk Des k for further her info informa rmatio tion n. * ‘A’ Dimension = longest distance across shape.
Wilson Amada ABS Tooling ®
Wilson Amada Style ABS Punches, Bolt-on Strippers and Punch Assemblies now available from Wilson Tool.
Punches, guides and strippers are fully compatible and interchangeable with Amada ® original ABS tooling.
Description Bolt-on Strippers
C Station • Round • Shape D Station • Round • Shape E Station • Round • Shape
Cat. No No.
Price
13629 13630 13631 13632 13633 13634
Bolt-on strippers are available for Amada® manufacturered holders only.
Wilson Amada Style ABS Quick Adjust A Station Up to 12.7mm ‘A‘ Dimension*
URETHANE PLUG (2 Req’d) Cat. No. 13868
• •
SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 970476
•
PUNCH HEAD Cat. No. 13395
•
PUNCH HEAD RETAINER Cat. No. 13396
•
NYLON WIRE Cat. No. 24437
SPRING PACK ASSEMBLY Cat. No. 13394
•
•
SPRING Cat. No. 24291 RETAINING RING Cat. No. 24290
•
CANISTER Cat. No. 13397
•
•
SPRING SUPPORT Cat. No. 13398 GUIDE (See below)
•
Notes † Slug Hugger® dies must be ordered punch size plus clearance. Size restrictions apply. Contact Sales Desk for further information information (patented). Slug Hugger 2 availab available le on request.
STRIPPER (See below)
•
* ‘A’ Dimension = longest distance across shape.
DOWEL PIN (3/16 x .312) .312) Cat. No. No. 6013
• Maximum Material Thickness 3.81mm
Description
Cat. No No.
Punch & Guide Assembly
• Round • Shape Fitted • Optima® Add On
13823 13824 -
Punches
• Round • Shape • Optima® Add On
13827 13870 -
• Round • Shape (0°) • Shape (0° & 45°) • Shape (0° & 90°)
13073 13074 13075 13076
Stripper
• Round • Shape Fitted
13045 13152
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ultltiima ma™ ™ Ad Addd On (Sh Shaape pe))
2192 1808 2193 13801 -
Guides
12.7mm (A) Station Add Ons
Price
Add ons for Rounds Punch
Small Diameter
Die
Stripper
N/C N/C
0.79 - 1.50mm Clearance < 0.10mm Add ons for Shapes Small Widths
Punch
Die
Stripper
0.79 - 1.0mm
N/C
Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back back taper, or no back taper. taper.
Stubby Style (A) Station Add Ons Note: Must use stubby style die and guide with stubby style punch Use Standard Punch and Die Price Plus:
Punch Round (2.3mm max dia.) add Shape add
Standard Shapes & Key Locations (Die View)
Die Round add Shape add
Wilson Amada Style ABS A Station Up to 12.7mm ‘A‘ Dimension*
URETHANE PLUG Cat. No. 13868
• •
PUNCH HEAD ASSEMBL ASSEMBLY Y Cat. No. 13864
•
SOCKET HEAD CAP SCREW Cat. No. 970476
SPRING Cat. No. 13079
•
•
SPRING SUPPORT Cat. No. 13078
GUIDE (See below)
•
Notes † Slug Hugger® dies must be ordered punch size plus clearance. Size restrictions apply. Contact Sales Desk for further information information (patented). Slug Hugger 2 availab available le on request.
STRIPPER (See below)
* ‘A’ Dimension = longest distance across shape.
•
DOWEL PIN (3/16 x .312) .312) Cat. No. No. 6013
• Maximum Material Thickness 3.81mm
Description
Cat. No No.
Punch & Guide Assembly
• Round • Shape Fitted • Optima® Add On
13856 13858 -
Punches
• Round • Shape • Optima® Add On
13827 13870 -
• Round • Shape (0°) • Shape (0° & 45°) • Shape (0° & 90°)
13073 13074 13075 13076
Stripper
• Round • Shape Fitted
13045 13152
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2192 1808 2193 13801 -
Guides
12.7mm (A) Station Add Ons
Price
Add ons for Rounds Punch
Small Diameter
Die
Stripper
N/C N/C
0.79 - 1.50mm Clearance < 0.10mm Add ons for Shapes Small Widths
Punch
Die
Stripper
0.79 - 1.0mm
N/C
Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back back taper, or or no back taper. taper.
Stubby Style (A) Station Add Ons Note: Must use stubby style die and guide with stubby style punch Use Standard Punch and Die Price Plus:
Punch Round (2.3mm max dia.) add Shape add
Standard Shapes & Key Locations (Die View)
Die Round add Shape add
Wilson Amada Style ABS Quick Adjust B Station Up to 31.75mm ‘A‘ ‘A‘ Dimension*
URETHANE PLUG (2 Req’d) Cat. No. 13868
•
•
SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 6333
•
PUNCH HEAD Cat. No. 13400
•
PUNCH HEAD RETAINER Cat. No. 13401
•
RETAINING RING Cat. No. 974202
•
•
SPRING Cat. No. 30 RETAINING RING Cat. No. 24294
CANISTER Cat. No. 13402
•
•
SPRING PACK ASSEMBLY Cat. No. 13399
•
•
SPRING SUPPORT Cat. No. 13403
O-RING Cat. No. 24295
GUIDE (See below)
•
STRIPPER (See below)
• DOWEL PIN (3/16 x .345) .345) Cat. No. No. 6431
• Maximum Material Thickness 6.35mm
Description
Cat. No No.
Punch & Guide Assembly
• Round • Shape Fitted • Optima® Add On
13825 13826 -
Punches
• Round • Shape • Optima® Add On
13828 13872 -
• Round • Shape (0°) • Shape (0° & 45°) • Shape (0° & 90°)
13097 13098 13099 13100
Stripper
• Round • Shape Fitted
2433 2432
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ultltiima ma™ ™ Ad Addd On (Sh Shaape pe))
2194 2021 2195 13804 -
Guides
(B) Station Add Ons
Price
Add ons for Rounds Punch
Small Diameter
Die
Stripper
N/C N/C
0.79 - 1.50mm Clearance < 0.10mm Add ons for Shapes Small Widths 0.79 - 1.0mm ‘A’ Dimension* < 11.10mm Clearance < 0.10mm Add
Punch
Die
Stripper
N/C
N/C
N/C N/C
to round or shape punch punch for extra straight before before radius, extra back back taper, or or no back taper. taper.
Notes † Slug Hugger® dies must be ordere ordered d punch size plus cleara clearance. nce. Size restrictions apply. Slug Hugger 2 available on request. Contact Sales Desk for further information. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style ABS B Station Up to 31.75mm ‘A‘ ‘A‘ Dimension*
PUNCH HEAD ASSEMBL ASSEMBLY Y Cat. No. 13866
•
SPRING COVER Cat. No. 2732
•
•
SPRING SUPPORT ASSEMBLY Cat. No. 13078
SPRING Cat. No. 35122
•
GUIDE (See below)
•
STRIPPER (See below)
• DOWEL PIN (3/16 x .345) .345) Cat. No. No. 6431
• Maximum Material Thickness 6.35mm
Description
Cat. No No.
Punch & Guide Assembly
• Round • Shape Fitted • Optima® Add On
13860 13862 -
Punches
• Round • Shape • Optima® Add On
13828 13872 -
Guides
• Round • Shape (0°) • Shape (0° & 45°) • Shape (0° & 90°)
13097 13098 13099 13100
Stripper
• Round • Shape Fitted
2433 2432
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2194 2021 2195 13804 -
Price
(B) Station Add Ons Add ons for Rounds Punch
Small Diameter
Die
Stripper
N/C N/C
0.79 - 1.50mm Clearance < 0.10mm Add ons for Shapes Small Widths 0.79 - 1.0mm ‘A’ Dimension* < 11.10mm Clearance < 0.10mm Add
Punch
Die
Stripper
N/C
N/C
N/C N/C
to round or shape punch punch for extra straight before before radius, extra back taper, taper, or or no back taper. taper.
Notes ®
† Slug Hugger dies must be ordered punch size plus cleara clearance. nce. Size restrictions apply.. Slug Hugger 2 available on reques apply request. t. Contact Sales Desk for further information. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style ABS C Station STRIPPER RETAINED WITH STRIPPER CLIPS Up to 50.8mm ‘A‘ Dimension*
O-RING Cat. No. 972430
•
ADJUSTMENT PUSH BUTTON Cat. No. 10539
RETAINING RING Cat. No. 972441
•
•
•
•
SPRING Cat. No. 972396
• •
•
•
SPRING COVER Cat. No. 5693
DISC SPRING (12 Req’d) Cat. No. 5744
•
ADJUSTMENT LOCKING BALL Cat. No. 972420
•
DRIVER ASSEMBLY Cat. No. 5729 DRIVER Cat. No. 5736
ADJUSTMENT SHAFT ASSEMBLY Cat. No. 5735
•
WAVE SPRING Cat. No. 971692
•
•
•
• •
SPRING SUPPORT Cat. No. 5748
•
• •
PUNCH HOLDER Cat. No. 5556
•
SPECIAL SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 5197
•
ANTI-LOCK SHIM Cat. No. 5412
LOCK WASHER (2 Req’d) Cat. No. 2112
DISC SPRING (2 Req’d) Cat. No. 971690
RETAINING RING Cat. No. 972570
SPECIAL SOCKET HEAD CAP SCREW Cat. No. 13843
SOCKET HEAD CAP SCREW Cat. No. 6326
GUIDE UNIT ASSEMBLY Cat. No. 5420
LOCK WASHER Cat. No. 6327
•
SPECIAL SCREW Cat. No. 429
•
PUNCH HOLDER KEY Cat. No. 5373
•
GUIDE STRIPPER RING** Cat. No. 5035
Maximum Material Thickness 6.35mm
Description
Cat. No No.
Add ons for Rounds
13084
Guide Assembly Punches
50.8mm (C) Station Add Ons
Price
• Round • Shape • Optima® Add On
13614 13615 –
Strippers
• Round • Shape
5150 5151
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2196 1850 2197 13807 – –
Punch
Small Diameter < 25.4mm Clearance < 0.10mm
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C
N/C N/C
Add ons for Shapes Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension** < 29.21mm 29.22 - 31.72 Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back taper, taper, or or no back taper. taper.
Notes Standard guide assys. are keyed for shapes at 0°, 90° and 225°. All punches will be shippe shipped d with no shear unless specified. specified. † Slug Hugger® dies must be ordered punch size plus clearance . Size restrictions ctions apply. Slug Slu g Hug Hugger2 ger2 available lable on req reques uest. t. Con Contact tact Sales es Des Deskk for furt further herinf inform ormatio ation. n. ** Stripper ring must be used with 4X blanking screws Cat No. 5006 & washers 970485 for ABS (supplied and assembled). Cat No. 2810 pack of 4 stripper clips & screws supplied but not assembled as an alternative method to hold stripper. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style ABS Quick Release C Station WITH PUSH BUTTON STRIPPER RETENTION Up to 50.8mm ‘A‘ Dimension*
O-RING Cat. No. 972430
RETAINING RING Cat. No. 972441
•
• •
•
•
SPRING Cat. No. 972396
•
ADJUSTMENT PUSH BUTTON Cat. No. 10539
•
•
DISC SPRING (12 Req’d) Cat. No. 5744
•
SPRING COVER Cat. No. 5517
•
ADJUSTMENT LOCKING BALL Cat. No. 972420
DRIVER ASSEMBLY Cat. No. 5724
•
ADJUSTMENT SHAFT Cat. No. 5735
DRIVER Cat. No. 5736
• •
WAVE SPRING Cat. No. 971692
•
SPRING SUPPORT Cat. No. 5748
••
•
•
• •
PUNCH HOLDER Cat. No. 5556
•
SPECIAL SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 5197
•
LOCK WASHER (2 Req’d) Cat. No. 2112
ANTI-LOCK SHIM Cat. No. 5412 DISC SPRING (2 Req’d) Cat. No. 971690
RETAINING RING Cat. No. 972570
•
SOCKET HEAD CAP SCREW (M3 x 12mm) Cat. No. 6326
SPECIAL SOCKET HEAD CAP SCREW †† Cat. No. 13843 •
GUIDE Cat. No. 5518
•
SPRING (5 Req’d) Cat. No. 971694
LOCK WASHER Cat. No. 6327
••
•
PUNCH HOLDER KEY Cat. No. 5373
•
LOCKING BUTTON (2 Req’d) Req’d) Cat. No. No. 5518
SPECIAL PIN (2 Req’d) Cat. No. 5522
SPRING (2 Req’d) Req’d) Cat. No. No. 8155
STRIPPER CLIP (3 Req’d) Cat. No. 5521
GUIDE STRIPPER RING Cat. No. 5520
Maximum Material Thickness 6.35mm
Description
Cat. No No.
Add ons for Rounds
13829
Guide Assembly Punches
50.8mm (C) Station Add Ons
Price
• Round • Shape • Optima® Add On
13614 13615 –
Strippers
• Round • Shape
5150 5151
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2196 1850 2197 13807 – –
Punch
Small Diameter < 25.4mm Clearance < 0.10mm
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C
N/C N/C
Add ons for Shapes Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension* < 29.21mm 29.22 - 31.72 Clearance < 0.10mm Add
to round or shape punch for extra straight before before radius, extra back back taper, or no back taper. taper.
Notes Standard guide assys. are keyed for shapes at 0°, 90° and 225°. All punches will be shippe shipped d with no shear unless specified. specified. † Slug Hugger® dies must be ordered punch size plus clearance. Size restrictions ctions apply. Slug Slu g Hug Hugger ger2 2 available lable on req reques uest. t. Cont Contact act Sal Sales es Des Deskk for furt further herinf inform ormatio ation. n. †† M12 bolt Cat No. 6605 includ included ed but not assemb assembled. led. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style ABS D Station STRIPPER RETAINED WITH STRIPPER CLIPS Up to 88.9mm ‘A‘ Dimension* •
O-RING Cat. No. 972430
•
•
ADJUSTMENT PUSH BUTTON Cat. No. 5737 SPRING COVER Cat. No. 5423
•
RETAINING RING Cat. No. 972441
•
SPRING Cat. No. 972396
• •
•
•
•
DISC SPRING (7 Req’d) Cat. No. 5449
ADJUSTMENT LOCKING BALL Cat. No. 972420
•
ADJUSTMENT SHAFT ASSEMBLY Cat. No. 5739 WAVE SPRING Cat. No. 971692
•
•
•
•
•
• •
•
PUNCH HOLDER Cat. No. 5558 ANTI-LOCK SHIM Cat. No. 5413
•
•
DRIVER ASSEMBLY Cat. No. 5730 DRIVER Cat. No. 5740 SPECIAL SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 5197 LOCK WASHER (2 Req’d) Cat. No. 2112 SPRING SUPPORT Cat. No. 5738
• •
RETAINING RING Cat. No. 5747
SPRING DISC (2 Req’d) Cat. No. 971690
PUNCH HOLDER KEY Cat. No. 1862
SPECIAL SOCKET HEAD CAP SCREW Cat. No. 13844
LOCK WASHER (2 Req’d) Cat. No. 2112
•
GUIDE UNIT ASSEMBLY Cat. No. 5430 SPECIAL SCREW Cat. No. 429
•
SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 6110 GUIDE STRIPPER RING** Cat. No. 5036
•
Maximum Material Thickness 6.35mm
Description
Cat. No No.
Add ons for Rounds
13085
Guide Assembly Punches
88.9mm (D) Station Add Ons
Price
• Round • Shape • Optima® Add On
13616 13617 –
Strippers
• Round • Shape
5152 5153
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2198 1865 2199 13810 – –
Punch
Small Diameter 48.26mm 48.27 - 50.77mm Clearance < 0.10mm
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C N/C
N/C N/C N/C
Add ons for Shapes Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension** < 48.26mm 48.27 - 50.77mm Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back back taper, or or no back taper. taper.
Notes Standard guide assys. are keyed for shapes at 0°, 90° and 225°. All punches will be shipped with no shear unless specified. specified. †Slug Hugger® dies must be ordered punch size plus clearance. Size restrictions ctions apply. Slug Slu g Hug Hugger ger2 2 ava availa ilable bleon on req reques uest. t. Cont Contact act Sal Sales es Des Deskk for furt furtherinform herinformatio ation. n. ** Stripper ring must be used with 4X blanking screws Cat No. 5006 & washers 970485 for ABS (supplied and assembled). Cat No. 2810 pack of 4 stripper clips & screws supplied but not assembled as an alternative alternativ e method to hold strippers. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style ABS Quick Release D Station WITH PUSH BUTTON STRIPPER RETENTION Up to 88.9mm ‘A‘ Dimension* •
O-RING Cat. No. 972430
•
•
ADJUSTMENT PUSH BUTTON Cat. No. 5737 SPRING COVER Cat. No. 5561
•
RETAINING RING Cat. No. 972441
•
SPRING Cat. No. 972396
• •
•
•
•
DISC SPRING (7 Req’d) Cat. No. 5449
ADJUSTMENT LOCKING BALL Cat. No. 972420
•
ADJUSTMENT SHAFT ASSEMBLY Cat. No. 5739 WAVE SPRING Cat. No. 971692
•
•
•
•
•
DRIVER Cat. No. 5740
• •
SOCKET HEAD CAP SCREW (2 Req’d) (Spl. M5 x .8 Cone Pt.) Cat. No. 5197
•
PUNCH HOLDER Cat. No. 5558
LOCK WASHER (2 Req’d) Cat. No. 2112
ANTI-LOCK SHIM Cat. No. 5413
•
• •
•
SPRING SUPPORT Cat. No. 5738
SPRING DISC (2 Req’d) Cat. No. 971690
RETAINING RING Cat. No. 5747
SPECIAL SOCKET HEAD CAP SCREW †† Cat. No. 13844
PUNCH HOLDER KEY Cat. No. 1862
•
GUIDE UNIT ASSEMBLY Cat. No. 5524
•
LOCK WASHER (2 Req’d) Cat. No. 2112
• •
•
GUIDE ONLY Cat. No. 5527 SPRING (6 Req’d) Cat. No. 971694
•
SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 6110
•
LOCKING BUTTON (2 Req’d) Req’d) Cat. No. No. 5519
SPECIAL SPECIA L PIN (2 Req’d) Cat. No. 5522
SPRING (2 Req’d) Req’d) Cat. No. No. 8155 Maximum Material Thickness 6.35mm
STRIPPER CLIP (3 Req’d) Cat. No. 5521
Description
Cat. No No.
Punches
• Round • Shape • Optima® Add On
13616 13617 –
Strippers
• Round • Shape
5152 5153
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2198 1865 2199 13810 – –
GUIDE STRIPPER RING Cat. No. 5528
88.9mm (D) Station Add Ons
Price
Add ons for Rounds
13830
Guide Assembly
DRIVER ASSEMBLY Cat. No. 5725
Punch
Small Diameter 48.26mm 48.27 - 50.77mm Clearance < 0.10mm
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C N/C
N/C N/C N/C
Add ons for Shapes Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension* < 48.26mm 48.27 - 50.77mm Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back back taper, or no back taper. taper.
Notes Standard guide assys. are keyed for shapes at 0˚, 90˚ & 225˚. 1.6mm Rooftop shear is given to all punches with 'A' dimension greater than 50.8mm, and width greater than 6.35mm, at no extra charge.
† Slug Hugger® dies must be ordered punch size plus clearance. Size restric restrictions tions apply. Slug Hugger Hug ger 2 ava availa ilable ble on req reques uest. t. Con Contac tactt Sales es Desk Des k for fur furtherinform therinformati ation on.
†† M12 bolt Cat No. 970467 included but not assembled.
All punches 6.35mm and under in width will be * ‘A’ Dimension = longest distance across shipped with no shear unless specified. shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style ABS E Station STRIPPER RETAINED WITH STRIPPER CLIPS Up to 114.3mm ‘A‘ ‘A‘ Dimension*
O-RING Cat. No. 972430
• •
•
•
RETAINING RING Cat. No. 972441
•
•
ADJUSTMENT PUSH BUTTON Cat. No. 5737
•
SPRING Cat. No. 972396
•
•
•
SPRING COVER Cat. No. 5423
DISC SPRING (7 Req’d) Cat. No. 5449
ADJUSTMENT LOCKING BALL Cat. No. 972420 ADJUSTMENT SHAFT ASSEMBLY Cat. No. 5739 LIFTER PIN (4 Req’d) Cat. No. 5209
•
DRIVER Cat. No. 5742
•
•
•
•
•
DRIVER ASSEMBLY Cat. No. 5731
•
RETAINING RING Cat. No. 5747
•
SPECIAL SOCKET HEAD CAP SCREW (4 Req’d) Cat. No. 5210
SPRING SUPPORT Cat. No. 5741
WAVE SPRING Cat. No. 971692
•
•
PUNCH HOLDER KEY Cat. No. 1862
•
•
ANTI-LOCK SHIM Cat. No. 5413
•
PUNCH HOLDER Cat. No. 5560
LOCK WASHER (2 Req’d) Cat. No. 2112 SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 6110
DISC SPRING (2 Req’d) Cat. No. 971690
GUIDE UNIT ASSEMBLY Cat. No. 5438
SPECIAL SCREW Cat. No. 429
•
•
SPECIAL SOCKET HEAD CAP SCREW Cat. No. 13844 GUIDE STRIPPER RING** RING** Cat. No. 5037
Maximum Material Thickness 6.35mm
Description
Cat. No No.
114.3mm (E) Station Add Ons Add ons for Rounds
13088
Guide Assembly Punches
Price
• Round • Shape • Optima® Add On
13618 13619 -
Strippers
• Round • Shape
5154 5155
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2200 1878 2201 13817 – –
Punch
Small Diameter < 86.36mm 86.37 - 88.87mm Clearance < 0.10mm
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C N/C
N/C N/C N/C
Add ons for Shapes Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension** < 86.36mm 86.37 - 88.87mm Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back back taper, or or no back taper. taper.
Notes Standard guide assys. are keyed for shapes at 0°, 90° and 225°. All punches will be shippe shipped d with no shear unless specified. specified. †Slug Hugger® dies must be ordered punch size plus clearance . Size restric restrictions tions apply. Slug Slu g Hug Hugger2 ger2 available lable on req reques uest. t. Con Contact tact Sales es Des Deskk for furt further herinf inform ormatio ation. n. ** Stripper ring must be used with 4X blanking screws Cat No. 5006 & washers 970485 for ABS (supplied with assembled). Cat No. 2810 pack of 4 stripper clips & screws supplied but not assembled as an alternative alternati ve method to hold strippers. * ‘A’ Dimension = longest distance across shape.
Standard Shapes & Key Locations (Die View)
Wilson Amada Style ABS Quick Release E Station WITH PUSH BUTTON STRIPPER RETENTION Up to 114.3mm ‘A‘ Dimension*
O-RING Cat. No. 972430
• •
•
•
RETAINING RING Cat. No. 972441
•
•
ADJUSTMENT PUSH BUTTON Cat. No. 5737
SPRING Cat. No. 972396
•
•
•
SPRING COVER Cat. No. 5561
DISC SPRING (7 Req’d) Cat. No. 5449
ADJUSTMENT LOCKING BALL Cat. No. 972420 ADJUSTMENT SHAFT ASSEMBL Y Cat. No. 5739 LIFTER PIN (4 Req’d) Cat. No. 5209
•
DRIVER Cat. No. 5742
•
•
•
•
•
•
RETAINING RING Cat. No. 5747
•
•
SPECIAL SOCKET HEAD CAP SCREW (4 Req’d) Cat. No. 5210
SPRING SUPPORT Cat. No. 5741 •
WAVE SPRING Cat. No. 971692
•
ANTI-LOCK SHIM Cat. No. 5413
•
PUNCH HOLDER KEY Cat. No. 1862
•
LOCK WASHER (2 Req’d) Cat. No. 2112
•
PUNCH HOLDER Cat. No. 5560 DISC SPRING (2 Req’d) Cat. No. 971690 SPECIAL SOCKET HEAD CAP SCREW †† Cat. No. 13844 SPRING (8 Req’d) Cat. No. 971694
SOCKET HEAD CAP SCREW (2 Req’d) Cat. No. 6110 •
••
•
•
•
LOCKING BUTTON (2 Req’d) Req’d) Cat. No. No. 5519 SPRING (2 Req’d) Req’d) Cat. No. No. 8155 GUIDE STRIPPER RING Cat. No. 5538
STRIPPER CLIP (4 Req’d) Cat. No. 5521
Punches
Maximum Material Thickness 6.35mm
Cat. No No.
Price
114.3mm (E) Station Add Ons Add ons for Rounds
13831
Guide Assembly
GUIDE UNIT ASSEMBLY Cat. No. 5534 GUIDE ONLY Cat. No. 5537
SPECIAL SPECIA L PIN (2 Req’d) Cat. No. 5522
Description
DRIVER ASSEMBLY Cat. No. 5726
• Round • Shape • Optima® Add On
13618 13619 -
Strippers
• Round • Shape
5154 5155
Dies
• Round Slug Hugger ®† • Round Standard • Shape Slug Hugger ®† • Shape Standard • Ul Ultitima ma™ ™ Ad Addd On (R (Rou ound nd)) • Ul Ultitima ma™ ™ Ad Addd On (S (Sha hape pe))
2200 1878 2201 13817 – –
Punch
Small Diameter < 86.36mm 86.37 - 88.87mm Clearance < 0.10mm
Die
Stripper
Punch
Die
Stripper
N/C
N/C N/C N/C
N/C N/C N/C N/C
N/C N/C
N/C N/C N/C
Add ons for Shapes Small Widths 0.79 - 1.0mm 1.01 - 2.34mm Small ‘A’ Dimension* < 86.36mm 86.37 - 88.87mm Clearance < 0.10mm Add
to round or shape punch punch for extra straight before before radius, extra back back taper, or no back taper. taper.
Notes Standard guide assys. are keyed for shapes at 0˚ & 90˚. 1.6mm Rooftop shear is given to all punches with 'A' dimension greater than 50.8mm, and width greater than 6.35mm, at no extra charge. All punches 6.35mm and under in width will be shipped with no shear unless specified.
Standard Shapes & Key Locations (Die View)
† Slug Hugger® dies must be ordered punch restrictions tions apply. Slug size plus clearance. Size restric Hugger Hug ger 2 ava availa ilable ble on req reques uest. t. Con Contac tactt Sales es Deskfor fur furthe therr info informa rmatio tion n.
†† M12 bolt Cat No. 970467 included but not assembled. * ‘A’ Dimension = longest distance across shape.
Close to Clamp Tooling
88.9mm (D) Station for punching close to clamps Description Dies
• Slug Hugger ®† (relilief2 (re ef2 siside des,s, sh shpp at90˚) ® • Slug Hugger † (relief2 ief2 sid sides,shp es,shp at at0˚0˚-90˚) 90˚) ® • Slug Hugger † (relilief1 (re ef1 siside de,, shpat 90˚ 90˚)) • Slug Hugger ®† (relie (re lieff 1 sid side,shp e,shp at0˚-90 at0˚-90˚) ˚) • Standard (rel (r elie ieff 2 siside des,s, sh shpp at 90˚ 90˚)) • Standard (relie (re lieff 2 sid sides,shp es,shp at at0˚-9 0˚-90˚) 0˚) • Standard (rel (r elie ieff 1 siside de,, sh shpp at 90˚ 90˚)) • Standard (relie (re lieff 1 sid side, e,shpat shpat 0˚0˚-90˚ 90˚))
Cat. No No.
114.3mm (E) Station for punching close to clamps
Price
Description Dies
5157 5330 2464 5333
• Slug Hugger ®† (rel (r elie ieff 2 siside des,shp s,shp at90˚) • Slug Hugger ®† (relie (re lieff 2 sid sides,shp es,shp at at0˚-9 0˚-90˚) 0˚) ® • Slug Hugger † (rel (r elie ieff 1 siside de,, shpat 90˚ 90˚)) • Slug Hugger ®† (relie (re lieff 1 sid side, e,shpat shpat 0˚0˚-90˚ 90˚)) • Standard (rel (r elie ieff 2 siside des,shp s,shp at90˚) • Standard (relie (re lieff 2 sid sides,shp es,shp at at0˚-9 0˚-90˚) 0˚) • Standard (rel (r elie ieff 1 siside de,, shpat 90˚ 90˚)) • Standard (relie (re lieff 1 sid side, e,shpat shpat 0˚0˚-90˚ 90˚))
13814 13813 13812 13811
Cat. No No. 5159 5340 2467 5343 13821 13820 13819 13818
Notes † Slug Hugger ® dies must be ordered punch size plus clearance . Size restrictions apply. Contact Sales Desk for further information (patented). * ‘A’ Dimension = longest distance across shape.
Price
DuraDie
Slitting, complex shapes, clusters and close to clamps – DuraDie is the perfect solution for all these jobs Slitting Solution This is a special die holder assembly which provides you with the ideal slitting solution. The die inserts are fully supported by the die base and are hard wearing and economical to replace.
Problem Solving The DuraDie assembly is also the perfect solution when you are punch punching ing complex two dimens dimensional ional shapes and cluster patterns with small webs between holes. In fact the DuraDie system can help whenever die strength is an issue.
Shock Resistant The aperture (which closely follows the profile in the die insert), is cut into the shock resistant die holder which fully supports supp orts the speci special al die blade and the specially located shims.
Durable With a die insert made using Ultima™, a special powdered tool steel, you will get more hits between regrinds and reduced downtime.
Practical & Economical The complete assembly consists of a special die insert, a shim pack and a specially reinforced die holder. You can order duplicate die inserts for different materials and if you need to replace a worn die all you need is a new insert.
DuraDie
50.8mm (C) Station Slitting
Description
M6 X 10 LG BALL ENDED THRUST THRUST SCREW Cat. No. 24323 •
•
DIE HOLDER Cat. No. 12990
•
Ø3 X 12 LG ROLL PIN Cat. No. 24233
88.9mm (D) Station Slitting
•
•
DIE HOLDER Cat. No. 13007
•
Ø3 X 12 LG ROLL PIN Cat. No. 24233
88.9mm (D) Station Close to Clamps M6 X 10 LG BALL ENDED THRUST THRUST SCREW Cat. No. 24323
• •
DIE HOLDER KEYED AT 0° & 90° Cat. No. 13276
•
Ø3 X 12 LG ROLL PIN Cat. No. 24233
• •
Ø3 X 12 LG ROLL PIN Cat. No. 24233
114.3mm (E) Station Close to Clamps M6 X 10 LG BALL ENDED THRUST THRUST SCREW Cat. No. 24323 • •
DIE HOLDER KEYED AT 0° & 90° Cat. No. 13284
Die Blade (Slughugger)
12992
Shim Pack
12995
Knockout Tool
24310
Maximum length length * =51mm Maximum width width * = 7mm *Subject to certain certain restrictions
Cat. No No.
Diee Ba Di Base se As Asse semb mbly ly (n (not ot in incl clud udin ingg di diee bl blad ade) e)
1300 13 0066
Die Blade (Slughugger)
13009
Shim Pack
13012
Knockout Tool
24310
Price
Maximum length length * = 86mm Maximum width width * = 7mm *Subject to certain certain restrictions
Description
Cat. No No.
Die Bas Basee Ass Assemb embly ly 0&9 0&90° 0° (no (nott inc includ luding ing die bla blade) de)
132766 1327
Diee Bl Di Blad adee – re reliliev eved ed on 1 si side de (S (Slu lugh ghug ugge ger) r)
1328 13 2800
Diee Bl Di Blad adee – re reliliev eved ed on 2 si side dess (S (Slu lugh ghug ugge ger) r)
1328 13 2822
Shim Pack
13012
Knockout Tool
24310
Description
M6 X 10 LG BALL ENDED THRUST THRUST SCREW Cat. No. 24323
DIE HOLDER Cat. No. 13016
1298 12 9899
Price
Price
Maximum length length * = 81mm Maximum width width * = 7mm *Subject to certain certain restrictions
114.3mm (E) Station Slitting
•
Diee Ba Di Base se As Asse semb mbly ly (n (not ot in incl clud udin ingg di diee bl blad ade) e)
Description
M6 X 10 LG BALL ENDED THRUST THRUST SCREW Cat. No. 24323
Cat. No No.
•
Ø3 X 12 LG ROLL PIN Cat. No. 24233
Cat. No No.
Diee Ba Di Base se As Asse semb mbly ly (n (not ot in incl clud udin ingg di diee bl blad ade) e)
1301 13 0155
Die Blade (Slughugger)
13014
Shim Pack
13017
Knockout Tool
24313
Price
Maximum length length * = 111mm Maximum width width * = 11mm *Subject to certain certain restrictions
Description
Cat. No No.
Die Bas Basee Ass Assemb embly ly 0&9 0&90° 0° (no (nott inc includ luding ing die bla blade) de)
132844 1328
Diee Bl Di Blad adee – re reliliev eved ed on 1 si side de (S (Slu lugh ghug ugge ger) r)
1328 13 2888
Diee Bl Di Blad adee – re reliliev eved ed on 2 si side dess (S (Slu lugh ghug ugge ger) r)
1329 13 2900
Shim Pack
13017
Knockout Tool
24313
Price
Maximum length length * = 111mm Maximum width width * = 11mm *Subject to certain certain restrictions
Replacement Insert Assembly
Replaceable Insert Assembly Body (1/2” - 13)
Body (M - 12)
Punch Insert
Set (1/2” - 13)
Set (M - 12)
Station
Cat. No N o.
50.8mm (C)
2 623 26
2625
2590
2568
2624
88.9mm (D)
1966 19
2286
1967
1965
2372
114.3mm (E)
1969
2287
1970
1968
2373
Price
Cat. N o. o.
Price
Cat. No N o.
Price
Cat. No N o.
Price
Parts Description
Cat. No N o.
Cat at.. No.
Socket Head Cap Screw – 3/8” - 16 x 1-1/2” long (for 50.8mm (C) station)
6391
Socket Head Cap Screw – 3/8” - 16 x 1-1/2” long (for 88.9mm (D) & 114.3mm (E) stations)
6019
High Collar Lock Washer for 3/8” screw
2129
Dowel Pin – 1/4” Dia. x 450” long (All stations)
6004
Notes * Optima is standard on punch inserts. ®
* Blade insert punches under 9.53mm in width will be shipped with no shear unless specified. * Double Valley Shear is recommended for widths of 4.75mm up to 9.53mm and minimum lengths of 50.8mm when used for nibbling. * Undersized dimensions will incur additional charges. Please consult the fee schedule for the appropriate station to determine the charge. * See shear chart on page 30. * For widths less than 2.36mm, consult the sales desk. * Maximum width 19mm. * Inserts are available as obround to be used with rectangle dies, to eliminate ‘Saw Tooth Effect’.
Price
Pric Pr ice e
Punch Shims, Die Shims and Slug Ejectors
Die Shims Station
Quantity
Punch Shims Cat. No.
Price
Station
0.25mm Thick – Individually
Quantity
Cat. No.
Price
Individually
12.7mm (A)
1
2101
12.7mm (A)
1
13080
31.75mm (B)
1
2097
31.75mm (B)
1
152
50.8mm (C)
1
2089
50.8mm (C)
1
2096
88.9mm (D)
1
2081
88.9mm (D)
1
2088
114.3mm (E)
1
2073
114.3mm (E)
1
2080
0.25mm Thick – Package
Package
12.7mm (A)
25
2208
31.75mm (B)
25
98
31.75mm (B)
25
2209
50.8mm (C)
10
2169
50.8mm (C)
10
2210
88.9mm (D)
5
2170
88.9mm (D)
5
2211
114.3mm (E)
5
2171
114.3mm (E)
5
2212
Slug Ejectors
0.75mm Thick – Individually
Square Urethane
12.7mm (A)
1
2721
31.75mm (B)
1
2723
Hole Diameter in Punch
Quantity
Cat. No.
50.8mm (C)
1
2725
3.2mm
50
6116
88.9mm (D)
1
2727
4.8mm
50
6117
114.3mm (E)
1
2729
9.5mm
50
6118
12.7mm
50
6119
Assortment
50
6410
0.75mm Thick – Package
12.7mm (A)
25
2722
31.75mm (B)
25
2724
50.8mm (C)
10
2726
88.9mm (D)
5
2728
114.3mm (E)
5
2730
1.5mm Thick – Individually
12.7mm (A)
1
2104
31.75mm (B)
1
2100
50.8mm (C)
1
2092
88.9mm (D)
1
2084
114.3mm (E)
1
2076
1.5mm Thick – Package
12.7mm (A)
25
2172
31.75mm (B)
25
2173
50.8mm (C)
10
2174
88.9mm (D)
5
2175
114.3mm (E)
5
2176
Price
Non Standard Keying When ordering shapes at non-standard angles, use the diagrams below to eliminate any confusion.
Die View
Die View
Front of Machine
Front of Machine
Example
Wilson Tool’s keying diagram.
This key location matches Amada’s ® turret punch press programming method.
Shape at 23˚
Shape at single angles other than standard (Note: No additional charge on A & B Stations for shape at 45° increments) Station
Punches
Dies
12.7mm (A)
No Charge
Standard Keying, plus extra pins or keys for shapes at other than 45° incre increment mentss
Guides or Strippers
Station
Punches
Dies
No Charge
12.7mm (A)
Not Available
Not Available
per key
31.75mm (B)
Not Applicable
31.75mm (B)
Not Available
Not Available
per key
50.8mm (C)
Not Applicable
50.8mm (C)
per pin
per key
Not Applicable
88.9mm (D)
Not Applicable
88.9mm (D)
per pin
per key
Not Applicable
114.3mm (E)
Not Applicable
114.3mm (E)
per pin
per key
Not Applicable
Guides or Strippers
Standard Keying, plus extra pins or keys for shapes at 45° increments Punches Station
12.7mm (A)
Dies Guides or Strippers
Av Avai aillab ablle Option onss
Not available
Add On Price
Not available
Ava Avail ilab able le Op Opttio ions ns
Not available
Addd On Pri Ad rice ce
Not available
per key
0° & 45°
0° & 45°
per key
0° & 180°
0° & 180°
per key
31.75mm (B)
50.8mm (C)
45° Increments
per pin
45° Increments
per key
Not applicable
88.9mm (D)
45° Increments
per pin
45° Increments
per key
Not applicable
114.3mm (E)
45° Increments
per pin
45° Increments
per key
Not applicable
Shear Options
Type of Shear
Benefit
Limitation
Rooftop
Best shear for punching at maximum tonnages.
When nibbling, bite must be 75% of punch dimension or excessive side loading will result.
Concave or Double Concave
Best shear for nibbling because it inverts stresses.
The punch is less resistant to breakage when punching at high tonnages because of inverted stresses.
Inverted Rooftop
Also good shear for nibbling because it inverts stresses.
More susceptible to breakage because of a sharp focal point for stresses – use with great care.
Double Valley Shear
Best shear for nibbling when shape is long and narrow.
The punch is less resistant to breakage when punching at high tonnages because of inverted stresses.
JK Shear
A special punch tip shear that allows you to punch high strength materials with a reduced risk of breakage.
Can only be used on punches up to 25.4mm diameter or 'A' dimension*.
Special Shears Station
‘A’ Dimensions*
Inverted Rooftop
Double Valley
Single Concave
Double Concave
1.6mm Shear
31.75mm (B)
Within 31.75mm
50.8mm (C)
Within 50.8mm
88.9mm (D)
Within 88.9mm
114.3mm (E)
Within114.3mm
3.2mm Shear
3.2mm Shear
N/A
JK Shear Shape
1.6mm Shear
N/A
Die Clearance Selection Information Add on Price
% Total Clearance
Round Rectangle, Square, Hexagon Single ‘D’, Double ‘D’ Obround
Material
Minimum
Best
Maximum
Copper, 1/2 Hard
8
12
16
Brass, 1/2 Hard
6
11
16
Mild Steel
10
15
20
Steel 0.50C
12
18
24
Aluminium, Soft
5
10
15
Stainless Steel
15
20
25
% x Material Thickness=Total Thickness=Total Clearance
Notes If specified: 3.2mm maximum rooftop shear can be given at N/C for any round or shape in 50.8mm (C), 88.9mm (D) or 114.3mm (E). For rooftop shear on any round or shape in 12.7mm (A) or 31.75mm (B) stations, add •1.6mm rooftop shear is given to all punches with 'A' dimension* greater than 50.8mm and width greater than 6.35mm at no extra charge. All punches 6.35mm and under in width will be shipped with no shear unless specified. *'A' Dimension = longest distance across shape. **NOTE: In some instances, inverted rooftop is substituted for single and double concave shears.
Notes
Notes
Notes
WILSON TOO TOOL L INTERNA INTERNATIONAL TIONAL (EUROPE) LTD United Kingdom European Headquarters Stirling Road, South Marston Industrial Estate, Swindon, Wiltshire SN3 4TQ, United Kingdom Tel (Free): 0800 373748 Tel: +44 (0)1793 831818 Fax (Free): 0800 373758 Fax: +44 (0)1793 831945 email:
[email protected] [email protected] om France Bat B, 51 Rue d’Ourdy, d’Ourdy, 77550 Réau, France Tel: (Gratuit) (Gratuit) 0800 10 29 00 Tel: +33 (0)1 64 13 47 80 Fax: (Gratuit) (Gratuit) 0800 10 40 14 Fax: +33 (0)1 64 13 47 81 email:
[email protected] [email protected] om Germany Gottlieb Daimler Str 2 31552 Rodenberg, Germany Tel: (Frei) (Frei) 00800 945 766 8665 Tel: +49 (0)5723 747 0 Fax: (Frei) (Frei) 00800 945 766 329 Fax: +49 (0)5723 747 10 email:
[email protected] [email protected] m Scandinavia Ejby Industrivej 40 DK-2600 Glostrup, Denmark Tel (Free): 80 20 20 24 Tel: +45 44 53 16 99 Fax (Free): 80 20 20 26 Fax: +45 44 53 06 07 email:
[email protected] [email protected] .com
email:
[email protected] [email protected] om Visit us online at: www.wilsontool.com
Wilson Tool International Ltd - April 2011
United States Worldwide Headquarters 12912 Farnham Avenue White Bear Lake, MN 55110 USA Tel (Free): 800 328 9646 Tel: (651) 426 9133 Fax (Free): (Free): 800 222 0002 Fax: (651) 426 9134 email:
[email protected] [email protected] om Argentina Wilson Tool International(r), Argentina Von Wernicke 3041 PB San Isidro, 1642 Buenos Aires Argentina Tel: +54 114 76340 7634004 04 Fax: +54 114 5084190 email: ventasargentina@wilsontoo
[email protected] l.com China No. 6 Building of 58 4018 Lane Huaning Road Xinhuang Industry Park 201108 Shanghai, China Tel: +86 21 51089 51089638 638 Fax: +86 21 64422195 email:
[email protected] Mexico The Wilson Company SRL de CV BLVD.. Diaz Ordaz no 140 piso 20 BLVD Col. Santa Maria Monterrey, Nuevo Leon Mexico C.P. 64650 Tel: 52 (81) 8865 4820 Fax: 52 (81) 8865 4599 South Africa Wilson Tool South Africa Limited Rynhurst Business Park 156 Pretoria Road, Rynfield Benoni, 1501, Gauteng Republic of South Africa Tel: +27 877 217 875 Fax: 086 657 8629 email: simon.penney@wilsontool
[email protected] .com
www.wilsontool.ro
Distribuitor:
S.C. SM TECH SRL Tehnologii şi soluţii pentru industria prelucr ării tablelor
0040-331-401599 Tel/Fax: 0040-231-515702 0040-231-515702 0040-745-528494 Tel Mob: 0040-745-528494 E-mail: office (at) sm-tech.ro Tel:
Web:
www.sm-tech.ro www.wilsontool.ro
Vă stăm la dispoziţie cu plăcere cu orice informaţie sau ofertă pentru scule Wilson Tool destinate maşinii d-voastră de ştantat CNC sau presei d-voastr ă abkant
