This is project report on Stadium automation system for computer engineering departmentFull description
Full description
queenFull description
queenDescription complète
Deskripsi lengkap
marching bandDescrição completa
Pep band shortiesFull description
queenDescripción completa
Full description
Descripción: stadium
Something I did for APSC 150 Winter 2013 session.Full description
Educational resource for students of Architecture, regarding stadium design principles and constructional details. Prof.S.G.Bhate.(Pune.Maharashtra.India) 91-020-09890440648 shrikantbhate…Full description
Descripción: Pep band shorties
stadiumDescrição completa
1. Will the project be able to be completed by the May 20 deadline? How long will it take? According to my calculation the project is a total of 695 days, ending on March 27th, 2014, which …Full description
self explainingFull description
11/12/13
Str uctur al Infor mati on | Wembl ey Stadi um
Wembley Stadium
Structural Information As can be seen in the t he single line diagram dia gram (Figure 1), the t he loads will follow follow a large larg e number of paths to t o the foundations below. Snow, live, and dead loads are all transferred through a complex web of steel and reinforced rei nforced concrete to the base. The cross brac bracing ing at the interf ace ace between the roof structure and bowl, as well we ll as reinforcing steel in the bowl help to resist the lateral load created load created by wind.
Figure Fi gure 1 – 1 – Single line diagram showing the load paths through the through the building structure.
Figure 2 – 2 – Steel roof structure being erect ed during construct ion. This web of steel steel is used to channel the roof and snow loads to the outside of the bowl structure, in accordance with the “No obstructed view” requirement set by the client.
ae390wembl eystadi um.wor dpr ess.com/str uc/
1/4
11/12/13
Structural Information | Wembley Stadium
Figure 3 – Aerial view of Wembley Stadium during steel roof erection. With no columns to support the roof inside the stadium, a complex web of steel was used to channel loads out to the bowl edges.
Follow
Follow “Wembley Stadium” Get every new post delivered to your Inbox. Enter your email address Sign me up
Pow ered by WordPress .com Figure 4 – This section shows the required sight lines set forth by the Football Association, as well as the
slope of the roof structure.
Figure 5 – BIM models of the stadium, showing stressing and design.
ae390wembleystadium.wordpress.com/struc/
2/4
11/12/13
Structural Information | Wembley Stadium
Figure 6 – Seen in this figure are the pile locations used in the construction of Wembley Stadium. A number of pile cap layouts were utilized for this project, from 2-piles to 5-piles per pile cap. As can be seen at the Eastern Arch Base – there were 19 piles combined under one pile cap to support the load from the 440 foot high 1040 foot long arch.
Figure 7 – This soils cross-section at the location of the Eastern Arch Base shows the layout of the 19 piles in the pile-cap. Also shown is the depth to which these piles were required to reach in order to support the load created by the arch. Upon reaching the ground, the loads are dispersed into a series of 4000+ piles which stretch up to 45 meters (approx. 150 feet) into the earth (seen in Figures 6 & 7). This is required in order to reach soil that is suitab le for supporting the overall loads of the stadium. Structural Calculation Structural Analysis and Description Home Share this: