TOWNSEND Parts Catalog
www.c-a-m.com
432-381-8750
Raising Performance. Together TM www.c-a-m.com 432-381-8750
Cameron welcomes the TOWNSEND brand. The world-renowned Townsend brand name is gaining the strength and presence of a global flow control equipment leader. Cameron’s Drilling Systems division will offer replacement parts and service provided under the Townsend name.
With this powerful
acquisition, Cameron continues to fulfill our promise of raising performance. Together.
Note on part numbers: When ordering or referencing parts in this modified Townsend / Cameron catalog, please add “3K-” in front of all listed part numbers.
Revision: March 2010
2
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND GENERAL BOP INFORMATION
TYPE 81 RAM PREVENTER
• The Type 81 Ram Type BOP is comparable with Shaffer's Sentinel II and WSI Duke style blowout preventers. • The Type 81 Manual is available in 7-1/16 X 3M & 9 X 3M pressure ratings. • Type 81 Hydraulic is available in 7-1/16 X 3M, 7-1/16 X 5M, 9 X 3M and 9 X 5M pressure ratings. • Available in Single, Double and Triple Configurations. • Type 81 Ram Blocks are available in the following sizes: 7-1/16 X 3M - CSO (Blind) to 5-1/2" - 1.660" to 2-7/8" Offset 7-1/16 X 5M - CSO (Blind) to 5-1/2" - 1.660" to 2-7/8" Offset 9 X 3M/5M - CSO (Blind) to 7-5/8" - 1.660" to 3-1/2" Offset
TYPE 81-84 ANNURAM • The Type 81-84 Annuram BOP is comparable to attaching a Hydril GK style Annular BOP on top of a single or double Shaffer Sentinel BOP or WSI style single or double BOP. • The Type 81-84 Annuram BOP is available in 7-1/16 X 3M, 7-1/16 X 5M, 9 X 3M and 9 X 5M pressure ratings. • Note: 7-1/16 X 5M Type 84 Annuram Annular requires specifc Unit & Seal Kit.
TYPE 82 RAM PREVENTER
• The Type 82 Ram BOP is comparable with Shaffer's LWS preventer. • The Type 82 Hydraulic Preventer is available in 7-1/16 X 3M, 7-1/16 X 5M, 11 X 3M, 11 X 5M, 13-5/8 X 3 M and 13-5/8 X 5M pressure ratings. • Available in Single, Double and Triple Configurations. • The Type 82 Ram Bop accepts Shaffer Type 70 Ram Blocks • Ram Blocks are available in the following sizes: 7-1/16" Type 61 Rams - CSO (Blind) to 5-1/2" - 1.660 to 3-1/2" Offset 11" Type 70 Rams - CSO (Blind) to 8-5/8" - 2-3/8" to 3-1/2" Offset 13-5/8" Type 70 Rams - CSO (Blind) to 10-3/4" • 11" & 13-5/8" Rams are also available in VBR (Variable Bore) 2-3/8" to 3-1/2" & 4" to 5-1/2"
TYPE 82-90 ANNURAM • The Type 82-90 Annuram BOP is comparable to attaching a Shaffer Annular on top of a Shaffer style LWS ram type BOP. • The Type 82-90 Annuram BOP is available in 7-1/16 X 5M and 9 X 3M configurations.
Revision: March 2010
3
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND GENERAL BOP INFORMATION
TYPE 84 ANNULAR
• The Type 84 Annular BOP is comparable to Hydril's Type GK Annular • The Type 84 Annular is available in 7-1/16 X 3M, 7-1/16 X 5M "SHORTY", 9 X 3M, 11 X 3M, 11 X 5M, 13-5/8 X 3M and 13-5/8 X 5M • Packing Units are available in both Synthetic and Natural Compounds. Packing Units and Seals are interchangable with Hydril GK Annulars • Available with flanged or studded bottom. • Notice: 7-1/16 X 5M Type 84 "Shorty" requires specific Unit & Seal Kit.
TYPE 88 RAM PREVENTER • • • •
The Type 88 Ram Type BOP is comparable with Shaffer's LWP style Bop The Type 88 Hydraulic BOP is available in 9 X 3M pressure rating only. Available in as Single, Double and Triple configurations. Type 88 Ram Blocks are available in the following sizes: CSO (Blind) to 7-5/8" - 1.660" to 3-1/2" Offset
TYPE 88-84 ANNURAM • The Type 88-84 Annuram BOP is comparable to placing a Hydril GK Annular on top of a Shaffer LWP preventer. • The Type 88-84 Annuram BOP is available in 9 X 3M pressure rating only. • The Type 88-84 Bop is available in single or double ram configurations. • Note: 7-1/16 X 5M "Shorty" Type 84 Annuram Annular requires specific Packing Unit and Seal Kit.
TYPE 90 ANNULAR • The Type 90 Annular Preventer is comparable to Shaffer's Annular style BOP. • The Type 90 Annular is available in 7-1/16 X 3M, 7-1/16 X 5M, 9 X 3M, 11 x 3M, 11 X 5M and 13-5/8" X 5M pressure ratings. (13-5/8 X 5M Annular is also available with 13-5/8 X 3M Connection) • Packing Units are available in standard configurations or "ANUFLEX"® • Packing Units are avaliable in Sunthetic and Natural Compounds.
Revision: March 2010
4
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND GENERAL BOP INFORMATION TYPE 99 RAM PREVENTER • • • •
The Type 99 Ram Type Preventer is comparable with Shaffer's Chasovoy BOP. The Type 99 Preventer is only available in Hydraulic. The Type 99 is available in Double configuration. Type 99 Ram Blocks are available in the following sizes: CSO (Blind) to 5-1/2" - 1.660 to 2-7/8" • Note: Townsend Type 99 does not have the reversable bonnets found in Shaffer's Chasovoy BOP (Shaffer's Chasavoy style Bop is pattented)
TYPE ST RAM PREVENTER • The Type ST Ram Type Preventer is comparable with Cameron's Type U Bop. • The Type ST Preventer is available in 7-1/16 X 3M, 7-1/16 X 5M, 7-1/16 X 10M, 7-1/16" X 15M, 11 X 3M, 11 X 5M, 13-5/8 X 3M & 13-5/8 X 5M pressure ratings. • Shear Boosters are available • Type ST or Cameron Type U Ram Blocks are available in the following sizes: CSO (Blind) to Casing sizes & Dual, Dual Offset & Shear Rams
BISON ACCUMULATORS • The BISON Accumulator is comparable to Shaffer, Stewart Stevenson and Koomey accumulators. • The BISON Accumulator is available skid mounted or Trailer mounted. • The BISON Accumulator is available with gasoline or diesel engines. • The standard BISON Well Service Unit is 40 Gallon, other sizes up to 240 Gallon are available. • THE BISON Accumulator is offered either Remote or Manually operated. • The BISON Accumulator is manufactured by BURNSCO BOP SERVICES INC. API 16-D Licenses no. 16D-0020
Notice: Townsend, is not affiliated with Shaffer, Hydril, Stewart & Stevenson or Koomey. Cameron Type U, Shaffer LWP, LWS, Chasavoy, Sentinel, Hydril GK, WSI, Cad, Stewart & Stevenson and Koomey are trademarks of the above mentioned companies and reference to this equipment is intended for reader's reference only. Townsend does not intend to give the reader the impression that it manufactures any equipment for any of the above companies. Townsend and it's logos and literature are also protected by trademarks and copyright laws.
Revision: March 2010
5
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81 MANUAL OPERATED BOP 7-1/16 X 3M – 9 X 3M
36
6A
23
Note: Item 39 - Alignment Plug is use on old style Type 81 only.
Revision: March 2010
6
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81 MANUAL OPERATED BOP ITEM
SINGLE
DOUBLE
TRIPLE
7-1/16 X 3M
7-1/16 X 5M
9 X 3M
---
---
---
---
DESCRIPTION COMPLETE BOP - SINGLE (STUDDED)
TM8101
TM8101-5
TM8101-8
---
---
---
---
COMPLETE BOP - DOUBLE (STUDDED)
TM8102
TM8102-5
TM8102-8
---
---
---
---
COMPLETE BOP - TRIPLE (STUDDED)
TM8103
TM8103-5
TM8103-8
1
1
1
1
SINGLE BODY (STUDDED)
TM8107
TM8107-5
TM8107-8
1
1
1
1
DOUBLE BODY (STUDDED)
TM8108
TM8108-5
TM8108-8
1
1
1
1
TRIPLE BODY (STUDDED)
TM8109
TM8109-5
TM8109-8
2
24
24
24
TAP END STUD
300-330
300-770
300-765
3
24
24
24
G-2 HEX NUT
300-703
300-705
300-705
4
20
40
60
1" G-2 HEX NUT
300-702
300-702
300-702
5
20
40
60
TAP END STUD
300-315
300-315
300-315
6
2
4
6
PILLOW BLOCK
TM815
TM815
TM815
6-A
2
4
6
PILLOW BLOCK SPACER
TM815-S
TM815-S
TM815-S
7
4
8
12
PILLOW BLOCK CAP SCREW
TM816
TM816
TM816
8
4
8
12
BEARINGS (STEM BEARING HOUSING)
TM817
TM817
TM817
9
8
16
24
BEARING RACE (STEM BEARING HOUSING)
TM818
TM818
TM818
10
2
4
6
THREAD PROTECTOR SNAP RING
TM819
TM819
TM819
11
2
4
6
GREASE FITTINGS (GREASE PLATE)
TM8110
TM8110
TM8110
13
2
4
6
CHAIN
TM8112
TM8112
TM8112
14
12
24
36
SOCKET HEAD SCREWS (BONNET)
TM8113
TM8113
TM8113
15
2
4
6
SNAP RING (DRIVE SHAFT)
TM8114
TM8114
TM8114
16
2
2
2
LIFTING PLATE
TH819
TH819
TH819-8
17
1
2
3
HAND WHEEL
TH8111
TH8111
TH8111
19
1
2
3
UNIVERSAL JOINT (1-1/4" SQUARE)
TM8118
TM8118
TM8118
20
2
4
6
PACKING GLAND O. D. O-RING SEAL
TH8116
TH8116
TH8116-8
21
2
4
6
DOOR SEAL
TH8121
TH8121
TH8121-8
22
2
4
6
PACKING GLAND I.D. WIPER SEAL
TH8122
TH8122
TH8122
23
4
8
12
END COVER SEAL
TH8115
TH8115
TH8115
24
2
4
6
STEM NUT - SPROCKET
TM8122
TM8122
TM8122
25
2
4
6
SPROCKET - DRIVE SHAFT
TM8123
TM8123
TM8123
26
2
4
6
GREASE PLATE
TM8124
TM8124
TM8124
27
1
2
3
RAM SHAFT - LEFT HAND
TM8125
TM8125
TM8125-8
28
1
2
3
RAM SHAFT - RIGHT HAND
TM8126
TM8126
TM8126-8
29
2
4
6
THREAD PROTECTOR
TM8127
TM8127
TM8127-8
30
1
2
3
STEM BEARING HOUSING RH.
TM8128
TM8128
TM8128-8
31
1
2
3
STEM BEARING HOUSING LH.
TM8129
TM8129
TM8129-8
32
2
4
6
BEARING HOUSING
TM8130
TM8130
TM8130
33
2
4
6
RAM SHAFT PACKING GLAND
TH8124
TH8124
TH8124-8
34
2
4
6
PACKING ASSEMBLY
TH8125
TH8125
TH8125
36
1
2
3
DRIVE SHAFT
TM8133
TM8133
TM8133-8
37
4
4
4
SPROCKET PROTECTOR
TM8134
TM8134
TM8134
38
2
4
6
RAM GUIDE PIN
TH8126
TH8126
TH8126
**39
2
4
6
ALIGNMENT PLUG (used on old style 81 only)
TH8127
TH8127
TH8127-8
40
2
4
6
END COVER
TM8137
TM8137
TM8137-8
41
1
2
3
DOOR
TH8129
TH8129
TH8129-8
43
2
4
6
BEARING RING (BEARING HOUSING)
TM8140
TM8140
TM8140
44
2
4
6
O-RING SEAL (used on old style 81 only)
TM8141
TM8141
TM8141-8
45
2
4
6
BONNET REBUILD KIT (10,12,15,20,22,34)
TM8100
TM8100
TM8100
50
1
2
3
RAM ASSEMBLY
Revision: March 2010
REFER TO RAM ASSEMBLY PAGE
7
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81 HYDRAULIC BOP 7-1/16 X 3M – 7-1/16 X 5M 9 X 3M – 9 X 5M 45
PIPE PLUG
OLD STYLE 81 ONLY
42
43
Note: Item 30 - Alignment Plug is use on old style Type 81 only.
Revision: March 2010
8
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81 HYDRAULIC BOP ITEM ------1 1 1 2 3 4 5 6 7 9 10 11 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 ** 30 31 32 33 34 35 36 37 38 39 41 42 43 44 45 50
SINGLE DOUBLE TRIPLE DESCRIPTION ------------24 24 8 8 2 6 12 2 2 1 1 2 4 4 2 4 4 2 4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 10 10 2 4 1
----------24 24 16 16 4 12 24 4 2 2 2 4 8 8 4 8 8 4 8 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 20 20 4 8 2
------------24 24 24 24 6 18 36 6 2 3 3 6 12 12 6 12 12 6 12 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 30 30 6 12 3
7-1/16 X 3M 7-1/16 X 5M
COMPLETE BOP - SINGLE (STUDDED) COMPLETE BOP - DOUBLE (STUDDED) COMPLETE BOP - TRIPLE (STUDDED) SINGLE BODY (STUDDED) DOUBLE BODY (STUDDED) TRIPLE BODY (STUDDED) TAP END STUD G2 HEX NUT END COVER G2 HEX NUT END COVER TAP END STUD INSIDE BONNET SEAL 1/4" NPT PIPE PLUG CYLINDER HEX HEAD BOLT BONNET REBUILD KITS LIFTING PLATE 14" HAND WHEEL UNIVERSAL JOINT SET SCREW S.S. M.O.R. PROTECTOR BOLT END COVER SEAL O. D. PACKING GLAND O-RING CYLINDER O-RING END COVER PORT O-RING PISTON TO RAM SHAFT O-RING MANIFOLD TUBE O-RING DOOR SEAL PACKING GLAND I.D. WIPER PISTON CROWN SEAL PACKING GLAND RAM SHAFT PACKING ASSEMBLY RAM GUIDE PIN ALIGNMENT PLUG (Old style 81 only) END COVER (LEFT OR RIGHT) DOOR PISTON CYLINDER BALANCE STEM PROTECTOR, M.O.R. LOCKING SHAFT RAM SHAFT MANIFOLD TUBE BONNET (LEFT OR RIGHT) DOOR NUT DOOR STUD BRASS SPACER RING PIPE PLUG 3/4" RAM ASSEMBLY
TH8101 TH8102 TH8103 TH8107 TH8108 TH8109 300-330 300-703 300-702 300-315 TH815 TH816 TH818 TH8100 TH819 TH8111 TH8112 TH8113 TH8114 TH8115 TH8116 TH8117 TH8118 TH8119 TH8120 TH8121 TH8122 TH8123 TH8124 TH8125 TH8126 TH8127 TH8128 TH8129 TH8130 TH8131 TH8132 TH8133 TH8134 TH8135 TH8136 TH8137 300-702 300-315 TH8140 TH 8145 ---
TH8101-5 TH8102-5 TH8103-5 TH8107-5 TH8108-5 TH8109-5 300-770 300-705 300-702 300-315 TH815 TH816 TH818 TH8100 TH819 TH8111 TH8112 TH8113 TH8114 TH8115 TH8116 TH8117 TH8118 TH8119 TH8120 TH8121 TH8122 TH8123 TH8124 TH8125 TH8126 TH8127 TH8128 TH8129-5 TH8130 TH8131 TH8132 TH8133 TH8134 TH8135 TH8136 TH8137 300-703 300-325 TH8140 TH 8145 ---
9 X 3M
9 X 5M
TH8101-8 TH8102-8 TH8103-8 TH8107-8 TH8108-8 TH8109-8 300-765 300-705 300-702 300-321 TH815 TH816 TH818-8 TH8100 TH819-8 TH8111 TH8112 TH8113 TH8114 TH8115 TH8116-8 TH8117 TH8118 TH8119 TH8120 TH8121-8 TH8122 TH8123 TH8124-8 TH8125 TH8126 TH8127-8 TH8128-8 TH8129-8 TH8130 TH8131-8 TH8132-8 TH8133-8 TH8134-8 TH8135-8 TH8136-8 TH8137-8 300-702 300-315 TH8140 TH 8145 ---
TH8101-8-5 TH8102-8-5 TH8103-8-5 TH8107-8-5 TH8108-8-5 TH8109-8-5 300-782 300-707 300-702 300-321 TH815 TH816 TH818-8 TH8100 TH819-8 TH8111 TH8112 TH8113 TH8114 TH8115 TH8116-8 TH8117 TH8118 TH8119 TH8120 TH8121-8 TH8122 TH8123 TH8124-8 TH8125 TH8126 TH8127-8 TH8128-8 TH8129-8-5 TH8130 TH8131-8 TH8132-8 TH8133-8 TH8134-8 TH8135-8 TH8136-8 TH8137-8 300-703 300-325 TH8140 TH 8145 ---
M.O.R. = MANUAL OVER RIDE ITEM 31 & 41 HYDRAULIC PORT HOLES DIFFERENT ON LEFT & RIGHT SIDE
Revision: March 2010
9
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 82 RAM TYPE BOP 7-1/16 X 5M – 11 X 3M
4
20
NOTE: ITEM 14 IS PART OF CYLINDER ON 11" X 3M TYPE 82 Revision: March 2010
10
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 82 RAM TYPE BOP ITEM
SINGLE
----1 1 2 3 4 5 6 6 7 9 10 11 12 14 15 16 17 18 19 20 21 22 23 24 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 49 52 53 --
----1 1 1 1 12 2 16 12 2 1 1 4 12 2 4 2 2 4 4 2 2 2 2 4 2 2 2 2 2 2 4 4 2 2 4 4 2 1 1 8 2 20 2 4 2 1 SET 2 2 2
Revision: March 2010
DOUBLE DESCRIPTION ----1 1 2 2 24 4 32 24 4 2 2 8 24 4 8 4 4 8 8 4 4 4 4 8 4 4 4 4 4 4 8 8 4 4 8 8 4 2 2 16 4 40 4 8 4 2 SET 2 2 2
7-1/16 X 3M
SINGLE BOP COMPLETE (STUDDED) DOUBLE BOP COMPLETE (STUDDED) SINGLE BODY DOUBLE BODY DOOR - RIGHT HAND DOOR - LEFT HAND PIPE PLUG DOOR SEAL DOOR BOLT DOOR BOLT CYLINDER CYLINDER HEAD - RIGHT CYLINDER HEAD - LEFT CYLINDER. TO CYL. HEAD SEAL BOLT, CYLINDER. TO CYLINDER HEAD MANIFOLD, CYLINDER SEAL, CYLINDER MANIFOLD RAM SHAFT PACKING ADAPTER - R-SHAFT SEAL, PK. ADAPTER - INNER SEAL, PK. ADAPTER - OUTER RETAINER, PACK ADAPTER SCRAPER RING, RAM SHAFT PISTON ASSEMBLY PISTON BODY PISTON RUBBER PISTON SEAL O-RING PISTON LOCK NUT SET SCREW - LOCK NUT LOCKING SHAFT THRUST BUSHING - LOCK SH.AFT RETAINER, THRUST BUSHING SEAL, THRUST BUSH.- OUTER SEAL, THRUST BUSH - INNER SCRAPER RING, LOCK. SHAFT HINGE BRACKET DOWEL PIN CAP SCREW, HINGE BKT. SHT CAP SCREW, HINGE BKT. LNG HINGE MANIFOLD -STRAIGHT HINGE MANIFOLD - CURVED SEAL, HINGE MANIFOLD HINGE PIN SEAL, HINGE PIN RETAINER, HINGE PIN PIPE PLUG GREASE FITTING RAM ASSEMBLY HAND WHEEL U-JOINT 1-1/4 HEX BONNET REBUILD KIT
11
7-1/16 X 5M
11 X 3M
TH7101-7-3 TH7101-7-5 TH7101-11-3 TH7102-7-3 TH7102-7-5 TH7102-11-3 TH7109-7-3 TH7109-7-5 TH7109-11-3 TH7110-7-3 TH7110-7-5 TH7110-11-3 TH7111 TH7111 TH7111-11 TH7112 TH7112 TH7112-11 TH7113 TH7113 TH7113 TH7114 TH7114 TH7114-11 TH7115 TH7115 ------------------TH7115 TH7116 TH7116 TH7116-11 TH7117 TH7117 TH7117-11 TH7118 TH7118 TH7118-11 TH7119 TH7119 TH7119 TH7120 TH7120 TH7120-11 TH7122 TH7122 IN CYLINDER TH7123 TH7123 TH7123 TH7124 TH7124 TH7124-11 TH7125 TH7125 TH7125 TH7126 TH7126 TH7126 TH7127 TH7127 TH7127 TH7128 TH7128 TH7128 TH7129 TH7129 TH7129 TH7130 TH7130 TH7130 TH7131 TH7131 TH7131 TH7132 TH7132 TH7132 TH7135 TH7135 TH7135 TH7136 TH7136 TH7136 TH7137 TH7137 TH7137 TH7138 TH7138 TH7138-11 TH7139 TH7139 TH7139 TH7140 TH7140 TH7140 TH7141 TH7141 TH7141 TH7142 TH7142 TH7142 TH7143 TH7143 TH7143 TH7144 TH7144 TH7144 TH7145 TH7145 TH7145 TH7146 TH7146 TH7146 TH7147 TH7147 --------TH7148 TH7148 TH7148-11 TH7149 TH7149 TH7149-11 TH7150 TH7150 TH7150 TH7151 TH7151 TH7151-11 TH7152 TH7152 TH7152 TH7153 TH7153 TH7153 TH7154 TH7154 TH7154 TH7155 TH7155 TH7155 REFER TO RAM ASSEMBLIES TH8111 TH8111 TH8111 TH9982 TH9982 TH9982 TH7100 TH7100 TH7100
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 82 RAM TYPE BOP 11 X 5M - 13-5/8 X 3M - 13-5/8 X 5M
4
4
16
Note: Item 16 & 17 - INNER & OUTER ADAPTER O-RINGS IN OLD STYLE TYPE 82 PREVENTERS ONLY.
Revision: March 2010
12
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 82 RAM TYPE BOP ITEM
SINGLE
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
---
---
DOUBLE DESCRIPTION ---
SINGLE COMPLETE BOP - STUDDED
TH7101-11-5
TH7101-13-3
TH7101-13-5
---
---
---
DOUBLE COMPLETE BOP - STUDDED
TH7102-11-5
TH7102-13-3
TH7102-13-5
1
1
1
SINGLE BODY - STUDDED
TH7109-11-5
TH7109-13-3
TH7109-13-5
1
1
1
DOUBLE BODY - STUDDED
TH7110-11-5
TH7110-13-3
TH7110-13-5
2
1
2
DOOR - RIGHT HAND
TH7111-11-5
TH7111-13
TH7111-13
3
1
2
DOOR - LEFT HAND
TH7112-11-5
TH7112-13
TH7112-13
4
12
24
PIPE PLUG
TH7113-11-5
TH7113-11-5
TH7113-11-5
5
2
4
DOOR SEAL
TH-7114-11-5
TH7114-13
TH7114-13
6
20
40
DOOR BOLT
TH7115-11-5
TH7115-13
TH7115-13
7
2
4
CYLINDER
TH7116-11-5
TH7116-13
TH7116-13
8
2
4
CYLINDER HEAD
TH7117-11-5
TH7117-5
TH7117-5
9
4
8
CYLINDER TO CYLINDER HEAD SEAL
TH7119-11-5
TH7119-11-5
TH7119-11-5
10
12
24
CYLINDER HEAD STUD
TH7120-11-5
TH7120-11-5
TH7120-11-5
11
4
8
PIPE PLUG
TH7162
TH7162
TH7162
11-A
2
4
1" CHECK VALVE
ST8724
ST8724
ST8724
11-B
2
4
1" SET SCREW
ST5930-5
ST5930-5
ST5930-5
12
4
8
CYLINDER MANIFOLD PORT SEAL
TH7123-11-5
TH7123-11-5
TH7123-11-5
13
2
4
RAM SHAFT
TH7124-11-5
TH7124-11-5
TH7124-11-5
14
4
8
RAM SHAFT PACKING
TH7133
TH7133
TH7133
15
2
4
PACKING ADAPTER - RAM SHAFT
TH7125-11-5
TH7125-11-5
TH7125-11-5
16
4
8
GREASE FITTINGS
TH7155
TH7155
TH7155
18
2
4
WIPER RING HOLDER
TH7164
TH7164
TH7164
19
2
4
PACKING BACK-UP RING RETAINER
TH7128-11-5
TH7128-11-5
TH7128-11-5
20
2
4
PISTON ASSEMBLY
TH7130-11-5
TH7130-11-5
TH7130-11-5
21
2
4
PISTON BODY
TH7131-11-5
TH7131-11-5
TH7131-11-5
22
4
8
PISTON RUBBER
TH7132-11-5
TH7132-11-5
TH7132-11-5
23
2
4
SCRAPER RING - RAM SHAFT
TH7129-11-5
TH7129-11-5
TH7129-11-5
24
2
4
PACKING BACK-UP RING
TH7134
TH7134
TH7134
26
2
4
PISTON O-RING
TH7135-11-5
TH7135-11-5
TH7135-11-5
27
2
4
PISTON LOCK NUT
TH7136-11-5
TH7136-11-5
TH7136-11-5
28
4
8
LOCK NUT SET SCREW
TH7137-11-5
TH7137-11-5
TH7137-11-5
29
2
4
LOCKING SHAFT
TH7138-11-5
TH7138-11-5
TH7138-11-5
30
2
4
THRUST BUSHING - LOCK SHAFT
TH7139-11-5
TH7139-11-5
TH7139-11-5
31
2
4
RETAINER, THRUST BUSHING
TH7140-11-5
TH7140-11-5
TH7140-11-5
32
2
4
LOCKING SHAFT SEAL
TH7141-11-5
TH7141-11-5
TH7141-11-5
34
2
4
SCRAPER RING, LOCK. SHAFT
TH7153-11-5
TH7153-11-5
TH7153-11-5
35
2
4
SCRAPER RING - CARRIER
TH7166
TH7166
TH7166
36
2
4
HINGE BRACKET
TH7144-11-5
TH7144-13
TH7144-13
37
4
8
DOWEL PIN
TH7145-11-5
TH7145-11-5
TH7145-11-5
38
8
16
CAP SCREW, HINGE BRACKET
TH7146-11-5
TH7146-11-5
TH7146-11-5
39-A
1
2
HINGE MANIFOLD -STRAIGHT
TH7148-11-5
TH7148-13
TH7148-13
39-B
1
2
HINGE MANIFOLD - CURVED
TH7149-11-5
TH7149-13
TH7149-13
40
8
16
SEAL, HINGE MANIFOLD
TH7150
TH7150
TH7150
41
2
4
HINGE PIN
TH7151-11-5
TH7151-13
TH7151-13
42
4
8
HINGE PIN PLUG
43
20
40
HINGE PIN - O-RING
44
2
4
45
4
8
46
----
----
TAP END STUD & NUT
47
12
24
CYLINDER HEAD NUT
300-703
300-703
50
2
4
HAND WHEEL
TH8111
TH8111
TH8111
51
2
4
U-JOINT
TH82ST
TH82ST
TH82ST
BONNET REBUILD KIT
TH7200
TH7200
TH7200
--
2
4
53
1 SET
2 SET
Revision: March 2010
TH7113
TH7113
TH7113
TH7152-11-5
TH7152-13
TH7152-13
HINGE PIN RETAINER
TH7153
TH7153
TH7153
PIPE PLUG
TH7154
TH7154
TH7154
REFER TO STUD CHART
RAM BLOCKS
300-703
REFER TO RAM BLOCK ASSEMBLY
13
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND 9 X 3M TYPE 88 RAM TYPE PREVENTER ( COMPARABLE WITH SHAFFER LWP STYLE PREVENTER)
SINGLE – DOUBLE – TRIPLE
A 11
B 11
A 11
11
Revision: March 2010
14
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND 9 X 3M TYPE 88 RAM PREVENTER NO.
SINGLE
DOUBLE
TRIPLE
DESCRIPTION
-
TH9101
TH9102
TH9103
COMPLETE BOP ASSEMBLY - STUDDED
PART NO. --------
COMPLETE BOP ASSEMBLY - FLANGED
--------
-
TH9104
TH9105
TH9106
1
TH9110
TH9110-2
TH9110-3
2
1
2
3
DOOR - RIGHT HAND
TH9111
3
1
2
3
DOOR - LEFT HAND
TH9112
4 5
1 1
2 2
3 3
CYLINDER ASSEMBLY - RIGHT HAND. CYLINDER ASSEMBLY - LEFT HAND
TH9113 TH9114
6
1
2
3
CYLINDER HEAD - RIGHT HAND
TH9115
7
1
2
3
CYLINDER HEAD - LEFT HAND
TH9116
8
2
4
6
RAM SHAFT
TH9117
9
2
4
6
LOCKING SCREW
TH9118
10
2
4
6
PISTON LOCK NUT
TH9119
11
2
4
6
PISTON ASSEMBLY
TH9120
11-A
4
8
12
PISTON RUBBER
TH9107
11-B
2
4
6
PISTON
TH9108
12
2
4
6
LOCKING SHAFT THRUST BUSHING
TH7139
13
2
4
6
PACKING ADAPTER
TH9122
14
1
2
3
HINGE BRACKET ASSEMBLY. - RIGHT HAND
TH9123
15
1
2
3
HINGE BRACKET ASSEMBLY. - LEFT HAND
TH9124
16
2
4
6
HINGE PIN
TH9125
17
4
8
12
MANIFOLD SEAL
TH9126
18
2
4
6
INTERNAL PISTON SEAL
TH9127
19
4
8
12
EXTERNAL THRUST BUSHING SEAL
TH9128
20
4
8
12
INTERNAL THRUST BUSHING SEAL
TH9129
21
2
4
6
DOOR SEAL
TH9130
22
4
8
12
HINGE BRACKET SEAL
TH9131
23
16
32
48
HINGE PIN SEAL
TH9132
24
4
8
12
EXTERNAL PACKING ADAPTER SEAL
TH9133
25
4
8
12
INTERNAL PACKING ADAPTER SEAL
TH9134
26
4
8
12
CYLINDER SEAL
TH9135
27
2
4
6
SCRAPER RING - RAM SHAFT
TH9136
28
2
4
6
LOCKING SHAFT SCRAPER RING
TH9137
29
2
4
6
THRUST BUSHING RETAINER
TH9138
30
2
4
6
PACKING ADAPTER RETAINER
TH9139
31
4
8
12
HINGE PIN RETAINER
TH9140
32
4
8
12
DOWEL PIN
TH9141
33
2
4
6
THREAD PROTECTOR PLUG
TH9142
34
16
32
48
DOOR BOLT
TH9143
35
24
48
72
CYLINDER CAP SCREW
TH9144
36
24
48
72
CYLINDER HEAD CAP SCREW
TH9145
37
10
20
30
HINGE BRACKET CAP SCREW
TH9146
40
1
2
3
RAM ASSEMBLY
41
2
4
6
HAND WHEEL
TH8111
42
2
4
6
UNIVERSAL JOINT
TH9982
**
2
4
6
BONNET REBUILD KIT
TH9100
Revision: March 2010
BODY
15
-------
----
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 99 RAM TYPE BOP 7-1/16 X 5M 2
34
33
32
35
1 28 30
29
31 3 27
4
38
12
5 25
24
13 15
6
26
16
21
7
20
19
5 4
8
9
10 9
16
13
11 12
37
15 14
17 18
Revision: March 2010
16
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 99 RAM TYPE BOP ITEM
SINGLE
DOUBLE
---
---
---
DESCRIPTION COMPLETE SINGLE BOP
PART NO. TH9900
---
----
---
COMPLETE DOUBLE BOP
TH9901
1
1
1
SINGLE BODY
TH9940
1
1
1
DOUBLE BODY
TH9941
2
2
4
COMPLETE BONNET ASSEMBLY
TH9902
3
2
4
BONNET
TH9903
4
4
8
NIPPLE 1/4" PIPE
TH9904
5
4
8
QUICK DISCONNECT (MALE)
TH9905
6
2
4
DOOR SEAL (MOLDED)
TH9906
*7
2
4
RAM SHAFT PACKING ASSEMBLY
TH9907
8
2
4
1/2" PIPE PLUG
TH9908
*9
8
16
MANIFOLD O-RING SEAL
TH9909
10
2
4
DOOR MANIFOLD
TH9910
*11
2
4
PISTON SEAL
TH9911
*12
4
8
CYLINDER O-RING
TH9912
*13
4
8
CYLINDER BACKUP RING
TH9913
14
2
4
PIPE PLUG -1/2"
TH9914
15
4
8
BLEEDER PLUG
TH9915
*16
4
8
COPPER WASHER
TH9916
17
2
4
CYLINDER HEAD
TH9917
18
8
16
CYLINDER HEAD NUT
TH9918
19
2
4
LOCKING SHAFT
TH9919
20
2
4
BALANCE STEM
TH9920
21
2
4
CYLINDER HEAD INTERMEDIATE
TH9921
*22
2
4
INTERMEDIATE SEAL
TH9922
25
2
4
CYLINDER
TH9925
26
2
4
PISTON/RAM SHAFT ASSEMBLY
TH9926
27
8
16
CYLINDER STUD
TH9927
28
2
4
PLUG
TH9928
29
2
4
SCREW
TH9929
30
2
4
CHECK VALVE (SECONDARY SEAL)
TH9930
*31
6
12
STICK PACKING
TH9931
32
2
4
BONNET NUT
TH9932
33
4
8
STUD BODY SLEEVE
TH9933
34
4
8
BONNET STUD
TH9934
35
4
8
DOOR BOLT
TH9935
37
2
4
WEAR PLATE
38
2
4
RAM BLOCK ASSEMBLY
--
2
4
HAND WHEEL
TH8111
--
2
4
U-JOINTS
TH82ST
--
2
4
BONNET REBUILD KIT 7,9,11,12.13.16,22 & 31
TH9950
TH9907 RAM SHAFT SEAL ASSEMBLY QNTY
DESCRIPTION
PART NO.
1
HYDRAULIC SEAL
TH9938
1
ADAPTER
TH9939
1
SEAL
TH9940
1
WIPER HOLDER TH9941 RING
1
WIPER SEAL
TH9942
1
SPIRAL RETAINER RING
TH9943
TH9937 RAM PAGE
NOTE: 7 RAM SHAFT SEAL ASSEMBLY CONSIST OF ITEMS MARKED WITH ASTERISK.
Revision: March 2010
17
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND "ST" RAM TYPE BOP 7-1/16" X 3M- 7-1/16 X 5M - 7-1/16 X 10M - 7-1/16 X 15M
22
4 1
40 18
19
20
22
4
41 21 25
24
23
16
17
6 15 36
35
10 38
37 34
26
12 42
7
2
5 31 28
29
27
11
30
32
9 33
8 3 13
Revision: March 2010
NOTE: ITEM 13 TOWNSEND USES AN ALLEN HEAD BOLT INSTEAD ON TAP END STUD.
18
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND 7-1/16" "ST" RAM TYPE BOP ITEM
SINGLE
7-1/16 X 3M
7-1/16 X 5M
7-1/16 X 10M
7-1/16 X 15M
*
1
DOUBLE DESCRIPTION 1
COMPLETE ASSEMBLY - SINGLE
ST-30886
ST-30330
ST-30913
ST-30806
*
1
1
COMPLETE ASSEMBLY - DOUBLE
ST-30887
ST-30988
ST-30915
ST-30917
1
1
1
BODY, SINGLE (OPEN FACE - FLANGED)
ST-30889
ST-30316
ST-30914
ST-30807
1
1
1
BODY, DOUBLE (OPEN FACE - FLANGED)
ST-30890
ST-30891
ST-30916
ST-30918
2
2
4
INTERMEDIATE FLANGE
ST-30266-4
ST-30266-3
ST-30266-2
ST-30266-1
3
2
4
BONNET
ST-30278-4
ST-30278-3
ST-30278-2
ST-30278-1
4
2
4
RAM ASSEMBLY
5
2
4
OPERATING PISTON
ST-667940
ST-667940
ST-667940
ST-667940
6
2
4
OPERATING CYLINDER
ST-30274-2
ST-30274-2
ST-30274-2
ST-30274-2
7
2
4
LOCKING SCREW HOUSING
ST-30308-1
ST-30308-1
ST-30308-1
ST-30308-1
8
2
4
LOCKING SCREW
ST-30326
ST-30326
ST-30326
ST-30326
9
2
4
RAM CHANGE PISTON - OPEN
ST-30324
ST-30324
ST-30324
ST-30324
10
2
4
RAM CHANGE PISTON - CLOSE
ST-30325
ST-30325
ST-30325
ST-30325
11
4
8
RAM CHANGE CYLINDER
ST-30273-2
ST-30273-2
ST-30273-2
ST-30273-2
12
8
16
BONNET BOLT
13
16
32
LOCKING SCREW HOUSING ALLEN HEAD BOLT
15
2
4
PLASTIC CHECK VALVE
16
2
4
PLASTIC PACKING SCREW
REFER TO RAM BLOCK PAGE
ST-30312-7
ST-30312-7
ST-30312-7
ST-30312-8
ST-5913-60-A
ST-5913-60-A
ST-5913-60-A
ST-5913-60-A
ST-8724
ST-8724
ST-8724
ST-8724
ST-5940-9
ST-5940-9
ST-5940-9
ST-5940-9
17
2
4
PLASTIC PACKING PIPE PLUG
ST-5930-5
ST-5930-5
ST-5930-5
ST-5930-5
*18
2
4
PLASTIC PACKING RING
ST-12469-36
ST-12469-36
ST-12469-36
ST-12469-36
*19
2
4
PLASTIC ENERGIZING RING
ST-18586-12
ST-18586-12
ST-18586-12
ST-18586-12
*20
2
4
CONNECTING ROD SEAL RING
ST-31600-1
ST-31600-1
ST-31600-1
ST-31600-1
*21
4
8
BACK UP RING
ST-21792-21
ST-21792-21
ST-21792-21
ST-21792-21
22
2
4
BONNET SEAL
ST-644197-01
ST-644197-01
ST-644197-01
ST-644197-01
23
4
8
RAM GUIDE PIN
ST-30313-2
ST-30313-2
ST-30313-2
ST-30313-2
*24
4
8
OPERATING CYLINDER SEAL
ST-6227-73-13-90
ST-6227-73-13-90
ST-6227-73-13-90
ST-6227-73-13-90
*25
2
4
OPERATING PISTON ROD TO INT. FLANGE SEAL
ST-18492-92
ST-18492-92
ST-18492-92
ST-18492-92
*26
2
4
OPERATING PISTON SEAL
*27
2
4
TAIL ROD SEAL
*28
2
4
WIPING SEAL
*29
4
8
RAM CHANGE PISTON TO BODY SEAL
ST-18491-73
ST-18491-73
ST-18491-73
ST-18491-73
*30
4
8
RAM CHG. PISTON ROD TO INT. FLANGE SEAL
ST-6227-32-13-90
ST-6227-32-13-90
ST-6227-32-13-90
ST-6227-32-13-90
*31
4
8
RAM CHANGE CYLINDER TO INT. FLANGE SEAL
ST-6227-41-13-90
ST-6227-41-13-90
ST-6227-41-13-90
ST-6227-41-13-90
RAM CHANGE CYLINDER TO BONNET SEAL
ST-6227-45-13-90
ST-6227-45-13-90
ST-6227-45-13-90
ST-6227-45-13-90
ST-6227-35-13-90
ST-6227-35-13-90
ST-6227-35-13-90
ST-6227-35-13-90
ST-6230-7-13-90
ST-6230-7-13-90
ST-6230-7-13-90
ST-6230-7-1390
*32
4
8
ST-704774
ST-704774
ST-704774
ST-704774
ST-11741-32
ST-11741-32
ST-11741-32
ST-11741-32
ST-6227-34-1-70
ST-6227-34-1-70
ST-6227-34-1-70
ST-6227-34-170
*33
4
8
RAM CHANGE PISTON SEAL
*34
8
16
BONNET BOLT RETAINER SEAL
35
16
32
INTERNAL FLANGE TO BONNET CAP SCREW
ST-18542-18
ST-18542-18
ST-18542-18
ST-18542-18
36
2
4
BLEEDER GLAND
ST-17454-8
ST-17454-8
ST-17454-8
ST-17454-8
37
2
4
BLEEDER PLUG
ST-17454-9
ST-17454-9
ST-17454-9
ST-17454-9
38
2
2
LIFTING EYE - 1-1/18" THREAD
ST-11849
ST-11849
ST-11849
ST-11849
*39
10
20
PLASTIC PACKING
ST-7650-8
ST-7650-8
ST-7650-8
ST-7650-8
*40
2
4
RETAINER RING
ST-18572-83
ST-18572-83
ST-18572-83
ST-18572-83
*41
2
4
CONNECTING ROD SEAL WASHER
ST-689523-04
ST-689523-04
ST-689523-04
ST-689523-04
*42
2
4
OPERATING PISTON WEAR RING
ST-49223-03
ST-49223-03
ST-49223-03
ST-49223-03
---
2
4
BONNET REBUILD KIT
ST-644909-01
ST-644909-01
ST-644909-01
ST-644909-01
---
2
4
U-JOINTS
TH82ST
TH82ST
TH82ST
TH82ST
---
2
4
HAND WHEELS
TH8111
TH8111
TH8111
TH8111
NOTE: *
Revision: March 2010
ITEMS ARE IN BONNET REBUILD KIT
19
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND "ST" RAM TYPE BOP 11 X 3M - 11 X 5M - 13-5/8 X 3M - 13-5/8 X 5M
22
4 1
40 18
19
20
22
4
41 21 25
24
23
16
17
6 15 36
35
10 38
37 34
26
12 42
7
2
5 31 28
29
27
11
30
32
9 33
8 3 13
Revision: March 2010
NOTE: ITEM 13 TOWNSEND USES AN ALLEN HEAD BOLT INSTEAD ON TAP END STUD.
20
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND 11" & 13-5/8 "ST" RAM TYPE BOP ITEM
SINGLE
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
*
1
DOUBLE DESCRIPTION 1
COMPLETE ASSEMBLY - SINGLE
ST-30919
ST-30394
ST-30903
ST-30328
*
1
1
COMPLETE ASSEMBLY - DOUBLE
ST-30922
ST-30899
ST-30905
ST-30329
1
1
1
BODY, SINGLE (OPEN FACE - FLANGED)
ST-30921
ST-30344
ST-30904
ST-30721
1
1
1
BODY, DOUBLE (OPEN FACE - FLANGED)
ST-30898
ST-30900
ST-30906
ST-30272
2
2
4
INTERMEDIATE FLANGE
ST-30267-1
ST-30267-2
ST-30270-2
ST-30270-1
3
2
4
BONNET
ST-30268-1
ST-30268-2
ST-30284-2
ST-30284-1
4
2
4
RAM ASSEMBLY
5
2
4
OPERATING PISTON
ST-673178
ST-673178
ST-679816
ST-679816
6
2
4
OPERATING CYLINDER
ST-30274-3
ST-30274-3
ST-30274-1
ST-30274-1
7
2
4
LOCKING SCREW HOUSING
ST-30308-2
ST-30308-2
ST-30308-3
ST-30308-3
8
2
4
LOCKING SCREW
ST-30365
ST-30365
ST-30307
ST-30307
9
2
4
RAM CHANGE PISTON - OPEN
ST-30362
ST-30362
ST-30310
ST-30310
10
2
4
RAM CHANGE PISTON - CLOSE
ST-30363
ST-30363
ST-30309
ST-30309
11
4
8
RAM CHANGE CYLINDER
ST-30273-3
ST-30273-3
ST-30273-1
ST-30273-1
12
8
16
BONNET BOLT
13
16
32
LOCKING SCREW HOUSING ALLEN HEAD BOLT
15
2
4
PLASTIC CHECK VALVE
16
2
4
PLASTIC PACKING SCREW
REFER TO RAM BLOCK PAGE
ST-30312-4
ST-30312-3
ST-30312-9
ST-30312-1
ST-5915-25-10
ST-5915-25-10
ST-5918-26-10
ST-5918-26-10
ST-8724
ST-8724
ST-8724
ST-8724
ST-5940-9
ST-5940-9
ST-5940-9
ST-5940-9
17
2
4
PLASTIC PACKING PIPE PLUG
ST-5930-5
ST-5930-5
ST-5930-5
ST-5930-5
*18
2
4
PLASTIC PACKING RING
ST-12469-38
ST-12469-38
ST-12469-24
ST-12469-24
*19
2
4
PLASTIC ENERGIZING RING
ST-18586-13
ST-18586-13
ST-18586-1
ST-18586-1
*20
2
4
CONNECTING ROD SEAL RING
ST-11741-38
ST-11741-38
ST-11741-36
ST-11741-36
*21
4
8
BACK UP RING
ST-21792-22
ST-21792-22
ST-21792-26
ST-21792-26
22
2
4
BONNET SEAL
ST-644197-02
ST-644197-02
ST-644197-03
ST-644197-03
23
4
8
RAM GUIDE PIN
*24
4
8
OPERATING CYLINDER SEAL
*25
2
4
OPERATING PISTON ROD TO INT. FLANGE SEAL
*26
2
4
OPERATING PISTON SEAL
*27
2
4
TAIL ROD SEAL
*28
2
4
WIPING SEAL
*29
4
8
*30 *31 *32
4 4 4
8 8 8
ST-30313-3
ST-30313-3
ST-30313-1
ST-30313-1
ST-6227-78-13-90
ST-6227-78-13-90
ST-6227-82-13-90
ST-6227-82-13-90
ST-18492-91
ST-18492-91
ST-18492-90
ST-18492-90
ST-704773
ST-704773
ST-704772
ST-704772
ST-11741-33
ST-11741-33
ST-11741-34
ST-11741-34
ST-6227-38-1-70
ST-6227-38-1-70
ST-6227-40-1-70
ST-6227-40-170
RAM CHANGE PISTON TO BODY SEAL
ST-6227-29-13-90
ST-6227-29-13-90
ST-6227-31-13-90
ST-6227-31-13-90
RAM CHG. PISTON ROD TO INT. FLANGE SEAL
ST-6227-34-13-90
ST-6227-34-13-90
ST-6227-36-13-90
ST-6227-36-13-90
RAM CHANGE CYLINDER TO INT. FLANGE SEAL
ST-6227-44-13-90
ST-6227-44-13-90
ST-6227-49-13-90
ST-6227-49-13-90
RAM CHANGE CYLINDER TO BONNET SEAL
ST-6227-48-13-90
ST-6227-48-13-90
ST-6227-88-13-90
ST-6227-88-13-90
ST-6227-38-13-90
ST-6227-41-13-90
ST-6227-41-13-90
*33
4
8
RAM CHANGE PISTON SEAL
ST-6227-38-13-90
*34
8
16
BONNET BOLT RETAINER SEAL
ST-6230-5-1-90
ST-6230-7-13-90
ST-6230-9-1-90
ST-6230-9-1-90
35
16
32
INTERNAL FLANGE TO BONNET CAP SCREW
ST-18542-19
ST-18542-19
ST-18542-20
ST-18542-20
36
2
4
BLEEDER GLAND
ST-17454-8
ST-17454-8
ST-17454-8
ST-17454-8
37
2
4
BLEEDER PLUG
ST-17454-9
ST-17454-9
ST-17454-9
ST-17454-9
38
2
2
LIFTING EYE - 1-1/8" THREAD
ST-11849
ST-11849
ST-11849
ST-11849
*39
10
20
PLASTIC PACKING
ST-7650-8
ST-7650-8
ST-7650-8
ST-7650-8
*40
2
4
RETAINER RING
ST-18572-84
ST-18572-84
ST-18572-85
ST-18572-85
*41
2
4
CONNECTING ROD SEAL WASHER
ST-689523-5
ST-689523-5
ST-689523-1
ST-689523-1
*42
2
4
OPERATING PISTON WEAR RING
ST-49223-02
ST-49223-02
ST-49223-01
ST-49223-01
---
2
4
BONNET REBUILD KIT
ST-644909-02
ST-644909-02
ST-644909-03
ST-644909-03
---
2
4
U-JOINTS 2" SQUARE
ST-6018-03
ST-6018-03
ST-6018-03
ST-6018-03
---
2
4
48" HAND WHEELS
ST-5298
ST-5298
ST-5298
ST-5298
NOTE: *
Revision: March 2010
ITEMS ARE IN BONNET REBUILD KIT
21
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81-84 ANNURAM BOP 7-1/16 X 3M - 7-1/16 X 5M 1 2 3 4
6 5 7 8
11 9
10
12
48 37 15 12 16 17
14
13 45 29
26 32 36
51
34 35
31
38
39 13
28
14
50
40
30
25
46 41
18 47 42
22
43 44
33
21
27 18 23
Revision: March 2010
22
24
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81-84 ANNURAM BOP
NO QTY DESCRIPTION
7-1/16 X 3M 7-1/16 X 5M
NO QTY DESCRIPTION
7-1/16 X 3M 7-1/16 X 5M
63-118
103-138
26
2
O-RING SEAL
TH8116
TH8116
PROTECTOR PLATE
63-30693
65-30693
27
4
O-RING SEAL
TH8117
TH8117
HEAD LOCKING SCREW
63-31607
63-31607
28
4
O-RING SEAL
TH8118
TH8118
1
TOP NUT
63-31601
65-30664
29
2
O-RING SEAL
TH8119
TH8119
5
1
INNER WEAR PLATE
30
4
O-RING SEAL
TH8120
TH8120
6
1
HEAD GASKET
63-31602
63-31602
31
2
DOOR SEAL
TH8121
TH8121
7
2
UPPER PISTON SEAL
63-31603
63-31603
32
2
WIPER
TH8122
TH8122
8
1
PACKING UNIT (SYNTHETIC)
63-31078-S
63-31078-S
33
2
CROWN SEAL
TH8123
TH8123
8
1
PACKING UNIT (NATURAL)
63-31078-N
65-31078-N
34
2
PACKING GLAND
TH8124
TH8124
9
2
PISTON HEAD SEAL
103-31604
103-31604
35
2
PACKING ASSEMBLY
TH8125
TH8125
2
RAM GUIDE PIN
TH8126
TH8126
TH8127-5
TH8127
1
4
PROTECTOR PLATE SCREW
2
1
3
1
4
63-1002036 63-1002036
10
2
LOWER PISTON SEAL
63-15614
63-15614
36
11
1
PISTON
63-31599
63-31599
37
2
**
1
ANNULAR SEAL KIT
63-50683
63-50683
ALIGNMENT PLUG (OLD STYLE ONLY)
38
2
END COVER (LEFT & RIGHT)
TH8128
TH8128
12
1
81-84 ANNURAM BODY
63-31598TH8101
65-30662TH8101-5
39
2
PRESSURE PLATE
TH8129
TH8129
13
10
G-2 HEX NUT
300-702
300-703
40
2
PISTON
TH8130
TH8130
14
10
T. E. STUD
300-315
300-325
41
2
CYLINDER
TH8131
TH8131
15
2
SEAL
TH815
TH815
42
2
BALANCE STEM
TH8132
TH8132
16
6
1/4" NPT PIPE PLUG
TH816
TH816
43
2
PROTECTOR, M.OR.
TH8133
TH8133
17
2
1/3" NPT WEEP PLUG
TH817
TH717
44
2
LOCKING SHAFT
TH8134
TH8134
18
12
3/4" X 9-3/8" HEX HEAD BOLT
TH818
TH818
45
2
RAM SHAFT
TH8135
TH8135
2
MANIFOLD TUBE
TH8136
TH8136
19
2
BONNET REBUILD KITS
TH8100
TH8100
46
21
2
14" HAND WHEEL
TH8111
TH8111
47
2
BONNET (LEFT OR RIGHT)
TH8137
TH8137
22
2
UNIVERSAL JOINT
TH8112
TH8112
50
2
BRASS SPACER RING
TH8140
TH8140
23
2
1/4" X 1-4" S.S. SET SCREW
TH8113
TH8113
51
1
RAM ASSEMBLY (SEE TYPE 81 RAM PAGE )
TYPE 81
TYPE 81
24
4
3/8" X 3/4" BOLT
TH8114
TH8114
25
4
SEAL
TH8115
TH8115
Revision: March 2010
NOTE: TYPE 7-1/16 X 5M TYPE 84 "SHORTY" ANNULAR REQUIRES SPECIAL SEAL KIT & PACKING UNIT.
23
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND 82-90 ANNURAM BOP 7-1/16 X 3M - 7-1/16 X 5M 20 19
7 6 18 2
5 13 12 4 11
3 14 10 14 8
52
24
9
29
55
64 62 60
15
32
1
17 56
66
58
63 67
44
53 51
43
54
44
59 65 57 30 35 23 1
34
36
35
31
27
4
26
40
41 42 47 48
69
50
73 73
38
31
37 39 70 72
Revision: March 2010
24
71
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND 82-90 ANNURAM BOP 7-1/16 X 3M - 7-1/16 X 5M NO
QTY DESCRIPTION
7-1/16 X 3M
7-1/16 X 5M
NO QTY DESCRIPTION
7-1/16 X 3M 7-1/16 X 5M
34
2
MANIFOLD CYLINDER
TH7122
TH7122
35
8
CYLINDER MANIFOLD SEAL
TH7123
TH7123
36
2
RAM SHAFT
TH7124
TH7124
37
2
PACKING ADAPTER - RAM SHAFT
TH7125
TH7125
150718
38
4
PACKING ADAPTER SEAL - OUTER
TH7126
TH7126
1521631
152163
39
4
PACKING ADAPTER SEAL - INNER
TH7127
TH7127
PACKING UNIT - SYNTHETIC
150847
150847
40
2
PACKING ADAPTER RETAINER
TH7128
TH7128
PACKING UNIT - NATURAL
150848
150848
41
2
SCRAPER RING - RAM SHAFT
TH7129
TH7129
PACKING UNIT - ANNUFLEX SYN.
150847-AF
150847-AF
42
2
PISTON ASSEMBLY
TH7130
TH7130
43
2
PISTON BODY
TH7131
TH7131
1
PACKING UNIT - ANNUFLEX - NAT.
150848-AF
150848-AF
44
4
PISTON RUBBER
TH7132
TH7132
6
24
STUD
150730
170730
47
2
PISTON LOCK NUT SEAL
TH7135
TH7135
7
24
NYLON HEX NUT
20106
20106
48
2
PISTON LOCK NUT
TH7136
TH7136
*8
1
UPPER I.D. SEAL
31105
31105
49
2
SET SCREW - PISTON LOCK NUT
TH7137
TH7137
*9
1
LOWER PISTON I.D. SEAL
31000
31000
50
2
LOCKING SHAFT
TH7138
TH7138
*10
2
O.D. PISTON SEAL
30780
30780
51
2
THRUST BUSHING - LOCK.I SHAFT
TH7139
TH7139
*11
1
UPPER ADAPTER I.D. SEAL
31104
31104
52
2
RETAINER - THRUST BUSHING
TH7140
TH7140
*12
1
LOWER ADAPTER I.D. SEAL
31002
31002
53
4
OUTER THRUST BUSHING SEAL
TH7141
TH7141
*13
1
O.D. ADAPTER SEAL
30408
30408
54
4
INNER THRUST BUSHING SEAL
TH7142
TH7142
2
SCRAPER RING - LOCKING SHAFT
TH7143
TH7143
1
1
ASSEMBLY
151834
152168
1
1
BODY
152420
152174
2
1
UPPER HOUSING - STUDDED
150717
150726
3
1
PISTON
150718
4
1
ADAPTER RING
5
1
5
1
5
1
5
*14
1
TOP ADAPTER SEAL
30244
30405
55
*15
2
PISTON WEAR RING
150613
150613
56
2
HINGE BRACKET
TH7144
TH7144
57
4
DOWEL PIN
TH7145
TH7145
58
8
HINGE BRACKET CAP SCREW -ST.
TH7146
TH7146
59
2
HINGE BRACKET CAP SCREW -LG.
TH7147
TH7147
60
1
MANIFOLD HINGE - STRAIGHT
TH7148
TH7148
61
1
MANIFOLD HINGE - CURVED
TH7149
TH7149
62
8
HINGE MANIFOLD SEAL
TH7150
TH7150
63
2
HINGE PIN
TH7151
TH7151
64
20
HINGE PIN SEAL
TH7152
TH7152
65
2
HINGE PIN RETAINER
TH7153
TH7153
66
4
PIPE PLUG
TH7154
TH7154
67
4
GREASE FITTING
TH7155
TH7155
68
4
BUSHING
TH7156
TH7156
69
1
RAM ASSEMBLY (SET)
****
****
70
1
DOOR WRENCH
TH7157
TH7157
71
1
CYLINDER HEAD WRENCH
TH7158
TH7158
72
2
HAND WHEEL
TH8111
TH8111
73
2
UNIVERSAL JOINT
TH9982
TH9982
74
2
RAM PORTION SEAL KIT
TH7100
TH7100
*16
1
LOWER HOUSING WEAR RING
150613
150613
17
2
PIPE PLUGS
TH7154
TH7154
18
2
ANCHOR SHACKLE
60496
60496
19
SET
TOP ADAPTER STUD
300-330
300-770
20
SET
G-2 HEX NUT
300-703
300-705
NS
1
ADAPTER RING WEAR RING
***
1
ANNULAR SEAL KIT - OLD STYLE NEW STYLE - EXTRA LOWER SEAL
22
1
RIGHT HAND DOOR
152344
152344
155079 155079-A
155079 155079-A
TH7111
TH7111
23
1
LEFT HAND DOOR
TH7112
TH7112
24
2
PIPE PLUGS
TH7113
TH7113
25
2
DOOR SEAL
TH7114
TH7114
26
16
DOOR BOLT
TH7115
TH7115
27
2
CYLINDER
TH7116
TH7116
29
1
CYLINDER HEAD - RIGHT HAND
TH7116
TH7117
30
1
CYLINDER HEAD - LEFT HAND
TH7118
TH7118
31
4
CYL. TO CYLINDER HEAD SEAL
TH7119
TH7119
32
12
CYL. TO CYLINDER. HEAD BOLT
TH7120
TH7120
Revision: March 2010
25
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 84 ANNULAR BOP (COMPARABLE WITH HYDRIL TYPE GK ANNULAR)
1
2 3 6 7
4
5 8
8
9
11
10 12
Revision: March 2010
26
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 84 ANNULAR BOP (COMPARABLE WITH HYDRIL GK ANNULAR)
7-1/16 X 3M - 7-1/16 X 5M "SHORTY" 9 X 3M - 11 X 3M - 11 X 5M 13-5/8 X 3M - 13-5/8 X 5M TOWNSEND TYPE 84 ANNULAR BOPS ARE COMPARABLE WITH HYDRIL GK STYLE ANNULAR. TOWNSEND'S 7-1/16 X 5M "SHORTY" TYPE 84 ANNULAR REQUIRES A DIFFERENT PACKING UNIT & SEAL KIT THAN THE STANDARD HYDRIL 7-1/16' X 5M GK ANNULAR BECAUSE OF THE HEIGHT DIFFERENCE. NO.
DESCRIPTION
NO. RQD
7-1/16 X 3M
7-1/16 X 5M SHORTY
9 X 3M
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
-
ASSEMBLY FLANGED
-
TA84-1600
TA84-0663
TA84-2877
TA84-1815
TA84-1400
TA84-0729
TA84-2873
1
PROTECTOR PLATE SCREW
4
TA84-118 (1-1/8")
TA84-138 (1-3/8")
TA84-138 (1-3/8")
TA84-138 (1-3/8"
TA84-178 (1-7/8")
TA84-138 (1-3/8")
TA84-158 (1-5/8")
2
PROTECTOR PLATE
1
TA84-0693-3
TA84-0693-5
TA84-2882
TA84-1406-3 TA84-1406-5
TA843-0741
TA84-8188
3
HEAD LOCKING SCREW
1
TA84-71607
TA84-71607
TA84-91607
TA84-91607
TA84-1407
TA84-1407
TA84-1407
4
SCREWED TOP
1
TA84-1601
TA84-0664
TA84-2879
TA84-1813
TA84-1398
TA84-0730
TA84-2944
5
WEAR PLATE
1
TA84-2036
TA84-2036
TA84-6117
TA84-1778
TA84-4203
TA84-4855
TA84-1788
6
HEAD GASKET
1
TA84-1602
*TA84-1602
TA84-2868
TA84-1809
TA84-1402
TA84-0738
TA84-8150
7
UPPER PISTON SEAL
2
TA84-1603
*TA84-1603
TA84-2870
TA84-1808
TA84-1403
TA84-0736
TA84-8151
8
PACKING UNIT (SYNTHETIC)
1
TA84-1078 -S
*TA84-1078 -S
TA84-2603 -S
TA84-1818 -S
TA84-1401 -S
TA84-0732 -S
TA84-8148 -S
8
PACKING UNIT (NATURAL)
1
TA84-1078 -N
*TA84-1078 -N
TA84-2603 -N
TA84-1818 -N
TA84-1401 -N
TA84-0732 -N
TA84-8148 -N
9
PISTON HEAD SEAL
2
TA84-1604
*TA84-1604
TA84-2871
TA84-1807
TA84-0736
TA84-0737
TA84-8152
10
LOWER PISTON SEAL
2
TA84-5614
*TA84-5614
TA84-2869
TA84-1604
TA84-2599
TA84-0735
TA84-8165
11
PISTON
1
TA84-1599
TA84-1599
TA84-2880
TA84-1814
TA84-1389
TA84-0731
TA84-8146
12
BODY FLANGED
1
TA84-1598
TA84-0662
TA84-2876
TA84-1812
TA84-1397
TA84-0728
TA84-2872
12
BODY STUDDED
1
TA84-1597
TA84-1630
TA84-2878
TA84-1816
TA84-1820
TA84-1708
TA84-2874
**
COMPLETE SEAL KIT
1
TA84-0683
*TA84-0683
TA84-0685
TA84-0687
TA84-0688
TA84-0689
TA84-0690
* NOTE: 7-1/16 X 5M TYPE 84 "SHORTY" ANNULAR REQUIRES SPECIFIC SEAL KIT AND PACKING UNIT.
Revision: March 2010
27
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 90 ANNULAR BOP (COMPARABLE WITH SHAFFER ANNULAR) 20 7
19
6
18 5 2 14
5
14 13
13 16B 11
4 11
16B
12 12 15
3
10 15
10 8
10
15
16
15 9
8A
8
16A 9A NOTE: Items 9A & 16A are for 6 X 3M & 6 X 5M "New Style" Type 90 Annular BOPS and require an additional lower piston seal and the 1" piston I.D. wear band material changes to 1/2" wear band material. Item 16B is an additional wear band added to adapter I.D. after 2005.
9
9A
16
16A 1
17 NOTE: Items 8 & 8A are specific to 13-5/8 X 3/5M annular preventers. Item 8 is a polymeric type seal and 8A is a hard band type seal. New 13-5/8 X 3/5M Type 90 Annular, after 7/1/08 are equipped at the factory with the hard band type seal.
Revision: March 2010
28
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 90 ANNULAR BOP (COMPARABLE WITH SHAFFER ANNULAR)
7-1/16 X 3M - 7-1/16 X 5M - 9 X 3M 11 X 3M - 11 X 5M - 13-5/8 X 5M TOWNSEND TYPE 90 ANNULAR BOPS ARE AVAILABLE WITH STANDARD PACKING UNITS OR THE PATENTED ANUFLEX STYLE UNIT. THE ANUFLEX INSERT HINGES AS THE RUBBER IS CLOSED AND OPENED. ANUFLEX PACKING UNITS HAVE A LONGER LIFE CYCLE.
NO.
QTY.
DESCRIPTION
1 2 3 4 5 5 5
1 1 1 1 1 1 1
ASSEMBLY LOWER HOUSING UPPER HOUSING PISTON ADAPTER RING PACKING UNIT - SYNTHETIC PACKING UNIT - NATURAL ANUFLEX UNIT- SYNTHETIC
5
1
ANUFLEX UNIT - NATURAL
6 7 *8
24 24 1
BODY STUDS ELASTIC HEX NUTS UPPER PISTON I.D. SEAL
**8A
1
UPPER PISTON I.D. SEAL (HARD BAND SEAL)
*9
1
LOWER PISTON I.D. SEAL
7-1/16 X 3M 7-1/16 X 5M TA90-1834 TA90-2420 TA90-0717 TA90-0718 TA90-2163
TA90-2168 TA90-2174 TA90-0726 TA90-0718 TA90-2163
9 X 3M
11 x 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
TA90-2176 TA90-2178 TA90-0992 TA90-2837 TA90-2827
TA90-2027 TA90-2019 TA90-0486 TA90-0498 TA90-2026
TA90-2331 TA90-2406 TA90-2328 TA90-2326 TA90-2323
TA90-1973 TA90-1974 TA90-0735 TA90-2148 TA90-1933
TA90-2442 TA90-2451 TA90-2453 TA90-2148 TA90-1933
TA90-0847-S
TA90-0847-S
TA90-0996-S
TA90-0578-S
TA90-0810-S
TA90-0576-S
TA90-0576-S
TA90-0848-N
TA90-0848-N
TA90-2272-N
TA90-0579-N
TA90-0809-N
TA90-0577-N
TA90-0577-N
TA90-0847AF
TA90-0857- TA90-0996- TA90-0578- TA90-0810- TA90-0576AF AF AF AF AF
TA90-0576AF
TA90-0848-AF
TA90-0848AF
TA90-2272AF
TA90-0579AF
TA90-0809AF
TA90-0577AF
TA90-0577-AF
TA90-0730 TA90-0106 TA90-1105
TA90-0730 TA90-0106 TA90-1105
TA90-5663 TA90-0106 TA90-1110
TA90-0487 TA90-0108 TA90-1099
TA90-0648 TA90-0110 TA90-1113
TA90-0659 TA90-0111 TA90-1097
TA90-0659 TA90-0111 TA90-1097
----
----
----
----
----
TA90-1097HB
TA90-1097HB
TA90-1000
TA90-1000
TA90-1002
TA90-1101
TA90-1152
TA90-0770
TA90-0770
TA90-1000
TA90-1000
----
----
----
----
----
TA90-0780 TA90-1104 TA90-1002 TA90-0408 TA90-0405 TA90-0613 TA90-0613
TA90-0780 TA90-1104 TA90-1002 TA90-0408 TA90-0405 TA90-0613 TA90-0613
TA90-1012 TA90-1109 TA90-1037 TA90-0784 1145 TA90-0613 TA90-0613
TA90-0765 TA90-1098 TA90-0761 TA90-0760 TA90-1095 TA90-0613 TA90-0613
TA90-1018 TA90-1114 TA90-0781 TA90-0783 TA90-1115 TA90-0613 TA90-0613
TA90-1029 TA90-1096 TA90-0771 TA90-0772 TA90-1094 TA90-0613 TA90-0613
TA90-1029 TA90-1096 TA90-0771 TA90-0772 TA90-1094 TA90-0613 TA90-0613
TA90-2344
TA90-2344
____
____
____
____
____
WEAR BAND - ADAPTER I.D.
TA90-2344
TA90-2344
____
____
TA90-2344
TA90-2344
TA90-2344
HYDRAULIC PORT PLUG SHACKLE B-7 T. E. STUD G-2 HEX NUT SEAL KIT (OLD STYLE) SEAL KIT (NEW STYLE)
TH7154 TA90-0496 300-330 300-703 TA90-5079 TA90-5079A
TH7154 TA90-0496 300-770 300-705 TA90-5079 TA90-5079A
TH7154 TA90-0496 300-765 300-705 TA90-5077 ----
TH7154 TA90-0494 300-766 300-705 TA90-5075 ----
TA90-6328 TA90-0497 300-793 300-709 TA90-5030 ----
TA90-6329 TA90-0497 300-786 300-705 TA90-5070 TA90-5070HB
TA90-6329 TA90-0497 300-782 300-707 TA90-5070 TA90-5070HB
(POLYMERIC STYLE SEAL)
(STANDARD)
9-A
1
****
LOWER PISTON I.D. SEAL ( NEW STYLE)
*10 *11 *12 *13 *14 15 16
2 1 1 1 1 2 1
16-A
1
O.D. PISTON SEAL UPPER I.D. ADAPTER SEAL LOWER I.D. ADAPTER SEAL O.D. ADAPTER SEAL. TOP ADAPTER SEAL WEAR BAND - PISTON - O. D. WEAR BAND - PISTON I.D. (STANDARD)
****
16-B
WEAR BAND - PISTON I.D. (NEW STYLE )
1
****
17 18 19 20 * ****
2 2 SET SET 1 1
NOTE: ITEMS 9-A & 16-A ARE FOR 6 X 3M AND 6 X 5M NEW STYLE TYPE 90 ANNULAR BOPS AND REQUIRE AN ADDITIONAL LOWER PISTON SEAL & THE 1" PISTON I. D WEAR BAND MATERIAL CHANGES TO 1/2" WEAR BAND MATERIAL. ITEM 16-B IS AN ADDITIONAL WEAR BAND ADDED TO ADAPTER I.D. AFTER 2005. ***ITEM NO # 8A- UPPER PISTON I.D. SEAL IS A HARD BAND SEAL INSTEAD OF A POLYMERIC TYPE SEAL.
Revision: March 2010
29
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81 RAM ASSEMBLIES (COMPATIBLE WITH SHAFFER SENTINEL II & WSI STYLE RAM BLOCKS)
TOWNSEND’S TYPE 81 RAM BLOCKS AND RAM RUBBERS ARE MANUFACTURED TO BE INTERCHANGEABLE WITH SHAFFER SENTINEL II AND WSI BLOWOUT PREVENTERS. SHAFFER SENTINEL STYLE I PREVENTERS WILL ADAPT TO TOWNSEND’S RAM BLOCKS. TOWNSEND’S RAM RUBBERS AND TOP SEALS ARE SPECIALLY FORMULATED FOR LONG ENDURANCE IN FIELD OPERATIONS. TOWNSEND TYPE 81 RAM BLOCKS AND RUBBERS ARE AVAILABLE IN 6” X 3M & 5M AND 9” X 3M & 5M, IN BOTH STANDARD AND OFFSET SIZES.
7-1/16" X 3/5M TYPE 81 MANUAL & HYDRAULIC RAM ASSEMBLY
SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TM8150
CSO
TM8150-RB
TM8150-FS
TM8150-TS
TM8151
1.660
TM8151-RB
TM8151-FS
TM8150-TS
TM8152
1.900
TM8152-RB
TM8152-FS
TM8150-TS
TM8153
2-1/16"
TM8153-RB
TM8153-FS
TM8150-TS
TM8154
2-3/8"
TM8154-RB
TM8154-FS
TM8150-TS
TM8155
2-7/8"
TM8155-RB
TM8155-FS
TM8150-TS
TM8156
3-1/2"
TM8156-RB
TM8156-FS
TM8150-TS
TM8169
4"
TM8169-RB
TM8169-FS
TM8150-TS
TM8157
4-1/2"
TM8157-RB
TM8157-FS
TM8150-TS
TM8160
5"
TM8160-RB
TM8160-FS
TM8150-TS
TM8158
5-1/2"
TM8158-RB
TM8158-FS
TM8150-TS
SHAFFER SENTINEL I & II & WSI are registered trademarks of their respective companies. Townsend International BOP is not affiliated with these companies.
Revision: March 2010
30
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81 RAM ASSEMBLIES 7-1/16" X 5M HYDRAULIC (ONLY) RAM ASSEMBLY
SIZE
RAM BLOCK FACE SEAL
TOP SEAL
TM8150
CSO
TM8150-RB
TM8150-FS
TM8150-TS
TM8151
1.660
TM8151-RB
TM8151-FS
TM8150-TS
TM8152
1.900
TM8152-RB
TM8152-FS
TM8150-TS
TM8153
2-1/16"
TM8153-RB
TM8153-FS
TM8150-TS
TM8154
2-3/8"
TM8154-RB
TM8154-FS
TM8150-TS
TM8155
2-7/8"
TM8155-RB
TM8155-FS
TM8150-TS
TM8156
3-1/2"
TM8156-RB
TM8156-FS
TM8150-TS
TM8169
4"
TM8169-RB
TM8169-FS
TM8150-TS
TM8157
4-1/2"
TM8157-RB
TM8157-FS
TM8150-TS
TM8160
5"
TM8160-RB
TM8160-FS
TM8150-TS
TM8158
5-1/2"
TM8158-RB
TM8158-FS
TM8150-TS
9" X 3M MANUAL & HYDRAULIC
Revision: March 2010
RAM ASSEMBLY
SIZE
RAM BLOCK FACE SEAL
TOP SEAL
TM8150-8
CSO
TM8150-8RB TM8150-8FS
TM8150-8TS
TM8151-8
1.660
TM8151-8RB TM8151-8FS
TM8150-8TS
TM8152-8
1.900
TM8152-8RB TM8152-8FS
TM8150-8TS
TM8153-8
2-1/16
TM8153-8RB TM8153-8FS
TM8150-8TS
TM8154-8
2-3/8"
TM8154-8RB TM8154-8FS
TM8150-8TS
TM8155-8
2-7/8
TM8155-8RB TM8155-8FS
TM8150-8TS
TM8156-8
3-1/2"
TM8156-8RB TM8156-8FS
TM8150-8TS
TM8169-8
4"
TM8169-8RB TM8169-8FS
TM8150-8TS
TM8157-8
4-1/2"
TM8157-8RB TM8157-8FS
TM8150-8TS
TM8170-8
5"
TM8170-8RB TM8170-8FS
TM8150-8TS
TM8158-8
5-1/2"
TM8158-8RB TM8158-8FS
TM8150-8TS
TM8159-8
6-5/8"
TM8159-8RB TM8159-8FS
TM8150-8TS
TM8160-8
7"
TM8160-8RB TM8160-8FS
TM8150-8TS
TM8161-8
7-5/8"
TM8161-8RB TM8161-8FS
TM8150-8TS
31
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 81 OFFSET RAM ASSEMBLIES 7-1/16" X 3M MANUAL & HYDRAULIC - OFFSET RAM ASSEMBLY
SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TM8162
1.660
TM8162-RB
TM8162-FS
TM8150-TS
TM8163
1.900
TM8163-RB
TM8163-FS
TM8150-TS
TM8164
2-1/16"
TM8164-RB
TM8164-FS
TM8150-TS
TM8165
2-3/8"
TM8165-RB
TM8165-FS
TM8150-TS
TM8166
2-7/8"
TM8166-RB
TM8166-FS
TM8150-TS
7-1/16" X 5M MANUAL & HYDRAULIC - OFFSET RAM ASSEMBLY
SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TM8162
1.660
TM8162-RB
TM8162-FS
TM8150-TS
TM8163
1.900
TM8163-RB
TM8163-FS
TM8150-TS
TM8164
2-1/16"
TM8164-RB
TM8164-FS
TM8150-TS
TM8165
2-3/8"
TM8165-RB
TM8165-FS
TM8150-TS
TM8166
2-7/8"
TM8166-RB
TM8166-FS
TM8150-TS
9" X 3M MANUAL & HYDRAULIC - OFFSET
Revision: March 2010
RAM ASSEMBLY
SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TM8162-8
1.660
TM8162-8RB
TM8162-8FS
TM8150-8TS
TM8163-8
1.990
TM8163-8RB
TM8163-8FS
TM8150-8TS
TM8164-8
2-1/16"
TM8164-8RB
TM8164-8FS
TM8150-8TS
TM8165-8
2-3/8"
TM8165-8RB
TM8165-8FS
TM8150-8TS
TM8166-8
2-7/8"
TM8166-8RB
TM8166-8FS
TM8150-8TS
TM8167-8
3-1/2"
TM8167-8RB
TM8167-8FS
TM8150-8TS
32
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND 7-1/16 X 3/5M TYPE 81 REDA-CABLE RAM ASSEMBLIES TOWNSEND’S TYPE 81 REDACABLE RAM BLOCKS AND RAM RUBBERS ARE AVAILABLE IN 23/8" & 2-7/8" FOR BOTH FLAT AND ROUND REDA-CABLE .
REDA-CABLE SLOT "FLAT OR ROUND"
7-1/16" X 3/5M TYPE 81 REDA-CABLE RAM BLOCKS RAM ASSEMBLY
REDA-CABLE SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TM8154-RCF2
2-3/8" FLAT-1.900"
TM8154-RCF2B
TM8154-RCF2R
TM8150-TS
TM8154-RCF4
2-3/8" FLAT-1.625"
TM8154-RCF4B
TM8154-RCF4R
TM8150-TS
TM8154-RCF6
2-3/8" FLAT-1.500"
TM8154-RCF6B
TM8154-RCF6R
TM8150-TS
TM8155-RCF2
2-7/8" FLAT-1.900"
TM8155-RCF2B
TM8155-RCF2R
TM8150-TS
TM8155-RCF4
2-7/8" FLAT-1.625"
TM8155-RCF4B
TM8155-RCF4R
TM8150-TS
TM8155-RCF6
2-7/8" FLAT-1.500"
TM8155-RCF6B
TM8155-RCF6R
TM8150-TS
TM8154-RCR2
2-3/8" ROUND-1.250"
TM8154-RCR2B
TM8154-RCR2R
TM8150-TS
TM8154-RCR4
2-3/8" ROUND-1.125"
TM8154-RCR4B
TM8154-RCR4R
TM8150-TS
TM8154-RCR6
2-3/8" ROUND1.000"
TM8154-RCR6B
TM8154-RCR6R
TM8150-TS
TM8155-RCR2
2-7/8" ROUND-1.250"
TM8155-RCR2B
TM8155-RCR2R
TM8150-TS
TM8155-RCR4
2-7/8" ROUND-1.125"
TM8155-RCR4B
TM8155-RCR4R
TM8150-TS
TM8155-RCR6
2-7/8" ROUND-1.000"
TM8155-RCR6B
TM8155-RCR6R
TM8150-TS
ROUND REDA-CABLE
FLAT REDA-CABLE
FLAT REDA-CABLE
Revision: March 2010
NO.
SIZE
NO.
SIZE
2
1.90"
2
1.25"
4
1.625"
4
1.125"
6
1.50"
6
1.00"
33
ROUND REDA-CABLE
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 88 RAM ASSEMBLIES (COMPATIBLE WITH SHAFFER TYPE 64 STYLE RAM BLOCKS)
TOWNSEND’S TYPE 88 RAM ASSEMBLIES ARE MANUFACTURED TO BE INTERCHANGEABLE WITH SHAFFER LWP STYLE BLOWOUT PREVENTERS. TOWNSEND’S RAM RUBBER ARE NOT INTERCHANGEABLE WITH SHAFFER TYPE 64 BLOCKS. TOWNSEND’S TYPE “81” FACE SEALS AND TOP SEALS ARE INTERCHANGEABLE WITH TYPE 88 RAMS.
7-1/16" X 3M HYDRAULIC
Revision: March 2010
RAM ASSEMBLY
SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TH8150-88-6
CSO
TH8150-88RB-6
TM8150-FS
TM8150-TS
TH8151-88-6
1.660
TH8151-88RB-6
TM8151-FS
TM8150-TS
TH8152-88-6
1.900
TH8152-88RB-6
TM8152-FS
TM8150-TS
TH8153-88-6
2-1/16"
TH8153-88RB-6
TM8153-FS
TM8150-TS
TH8154-88-6
2-3/8"
TH8154-88RB-6
TM8154-FS
TM8150-TS
TH8155-88-6
2-7/8"
TH8155-88RB-6
TM8155-FS
TM8150-TS
TH8156-88-6
3-1/2"
TH8156-88RB-6
TM8156-FS
TM8150-TS
TH8169-88-6
4"
TH8169-88RB-6
TM8169-FS
TM8150-TS
TH8157-88-6
4-1/2"
TH8157-88RB-6
TM8157-FS
TM8150-TS
TH8170-88-6
5"
TH8160-88RB-6
TM8160-FS
TM8150-TS
TH8158-88-6
5-1/2"
TH8158-88RB-6
TM8158-FS
TM8150-TS
34
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 88 RAM ASSEMBLIES (COMPATABLE WITH SHAFFER TYPE 64 STYLE RAM BLOCKS) 9" X 3M HYDRAULIC RAM ASSEMBLY
SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TH8150-88-9
CSO
TH8150-88RB-9
TM8150-8FS
TM8150-8TS
TH8151-88-9
1.660
TH8151-88RB-9
TM8151-8FS
TM8150-8TS
TH8152-88-9
1.900
TH8152-88RB-9
TM8152-8FS
TM8150-8TS
TH8153-88-9
2-1/16"
TH8153-88RB-9
TM8153-8FS
TM8150-8TS
TH8154-88-9
2-3/8"
TH8154-88RB-9
TM8154-8FS
TM8150-8TS
TH8155-88-9
2-7/8"
TH8155-88RB-9
TM8155-8FS
TM8150-8TS
TH8156-88-9
3-1/2"
TH8156-88RB-9
TM8156-8FS
TM8150-8TS
TH8169-88-9
4"
TH8169-88RB-9
TM8169-8FS
TM8150-8TS
TH8157-88-9
4-1/2"
TH8157-88RB-9
TM8157-8FS
TM8150-8TS
TH8170-88-9
5"
TH8170-88RB-9
TM8170-8FS
TM8150-8TS
TH8158-88-9
5-1/2"
TH8158-88RB-9
TM8158-8FS
TM8150-8TS
TH8159-88-9
6-5/8"
TH8159-88RB-9
TM8159-8FS
TM8150-8TS
TH8160-88-9
7"
TH8160-88RB-9
TM8160-8FS
TM8150-8TS
TH8161-88-9
7-5/8"
TH8161-88RB-9
TM8161-8FS
TM8150-8TS
7-1/16" X 3M HYDRAULIC OFFSET RAMS RAM ASSEMBLY
SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TH8162-88-6
1.660
TH8162-88RB-6
TM8162-FS
TM8150-TS
TH8163-88-6
1.900
TH8163-88RB-6
TM8163-FS
TM8150-TS
TH8164-88-6
2-1/16"
TH8164-88RB-6
TM8164-FS
TM8150-TS
TH8165-88-6
2-3/8"
TH8165-88RB-6
TM8165-FS
TM8150-TS
TH8166-88-6
2-7/8"
TH8166-88RB-6
TM8166-FS
TM8150-TS
TH8167-88-6
3-1/2"
TH8167-88RB-6
TM8167-FS
TM8150-TS
9" X 3M HYDRAULIC OFFSET RAMS
Revision: March 2010
RAM ASSEMBLY
SIZE
RAM BLOCK
FACE SEAL
TOP SEAL
TH8162-88-9
1.660
TH8162-88RB-9
TM8162-8FS
TM8150-8TS
TH8163-88-9
1.900
TH8163-88RB-9
TM8163-8FS
TM8150-8TS
TH8164-88-9
2-1/16"
TH8164-88RB-9
TM8164-8FS
TM8150-8TS
TH8165-88-9
2-3/8"
TH8165-88RB-9
TM8165-8FS
TM8150-8TS
TH8166-88-9
2-7/8"
TH8166-88RB-9
TM8166-8FS
TM8150-8TS
TH8167-88-9
3-1/2"
TH8167-88RB-9
TM8167-8FS
TM8150-8TS
35
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 99 RAM ASSEMBLIES (COMPATIBLE WITH SHAFFER CHASOVOY RAM BLOCKS)
TOWNSEND’S TYPE 99 Ram Assembly is manufactured to operate in both Hydraulic and Manual operated blowout preventers. TOWNSEND'S TYPE 99 Ram Block is interchangeable with Shaffer's Chasovoy Ram Block. TOWNSEND'S Ram Rubber is specially formulated for longevity in high pressure
7-1/16" X 3M TYPE 99 HYDRAULIC SIZE
RAM ASSEMBLY
RAM BLOCK
FACE SEAL
TOP SEAL
CSO
TH99150-AS
TH99150-RB
TH99150-FS
TH99150-TS
1.660
TH99151-AS
TH99151-RB
TH99151-FS
TH99150-TS
1.900
TH99152-AS
TH99152-RB
TH99152-FS
TH99150-TS
2-1/16"
TH99153-AS
TH99153-RB
TH99153-FS
TH99150-TS
2-3/8"
TH99154-AS
TH99154-RB
TH99154-FS
TH99150-TS
2-7/8"
TH99155-AS
TH99155-RB
TH99155-FS
TH99150-TS
3-1/2"
TH99156-AS
TH99156-RB
TH99156-FS
TH99150-TS
4"
TH99157-AS
TH99157-RB
TH99157-FS
TH99150-TS
4-1/2"
TH99158-AS
TH99158-RB
TH99158-FS
TH99150-TS
5"
TH99159-AS
TH99159-RB
TH99159-FS
TH99150-TS
5-1/2"
TH99160-AS
TH99160-RB
TH99160-FS
TH99150-TS
6-5/8"
TH99161-AS
TH99161-RB
TH99161-FS
TH99150-TS
7-1/16" X 3M HYDRAULIC OFFSET RAMS SIZE
RAM ASSEMBLY
RAM BLOCK
FACE SEAL
TOP SEAL
1.660
TH99162-AS
TH99162-RB
TH99162-FS
TH99150-TS
1.900
TH99163-AS
TH99163-RB
TH99163-FS
TH99150-TS
2-1/16"
TH99164-AS
TH99164-RB
TH99164-FS
TH99150-TS
2-3/8"
TH99165-AS
TH99165-RB
TH99165-FS
TH99150-TS
2-7/8"
TH99166-AS
TH99166-RB
TH99166-FS
TH99150-TS
NOTICE: TOWNSEND is not affiliated with Shaffer. Shaffer and Chasavoy are registered trademarks of Shaffer. Revision: March 2010
36
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 39 & 48 RAM RUBBERS (COMPATIBLE WITH SHAFFER TYPE 39, A, B, E, & LWS BOPS)
TOWNSEND’S Type 39 & Type 48 Ram Rubbers are molded so they can be installed with either side facing up. TOWNSEND’S Type 390 & 480 Ram Rubbers have a metal spring molded into one side of the back strap to force the rubber to flow upward when under pressure. This Ram Rubber can only be installed one way.
O.D. PIPE INCHES
6” x 3M Type 39
8” x 3M 8” x 5M Type 39
10” x 3M Type 39
10” x 5M Type 48
13-5/8” x 3M 13-5/8" x 5M Type 480
C.S.O.
192035-0
192213-0
192416-0
192616-0
192774-5
1.315
192040-0
——–
192419-0
——–
——–
1.660
192043-0
192206-0
192422-0
——–
192812-5
1.900
192046-0
192216-0
192826-0
——–
193768-5
2-1/16
192116-0
192108-0
192822-0
——–
192882-5
2-3/8
192049-0
192210-0
192425-0
192619-0
192722-5
2-7/8
192052-0
192222-0
192428-0
192622-0
192725-5
3-1/2
192055-0
192225-0
192431-0
192625-0
192728-5
4
192058-0
192228-0
192434-0
192628-0
192731-5
4-1/2
192061-0
192231-0
192440-0
192631-0
192734-5
5
192064-0
192237-0
192446-0
192637-0
192740-5
5-1/2
192067-0
192243-0
192452-0
192643-0
192743-5
6-5/8
——–
192255-0
192464-0
192655-0
192755-5
7
——–
192258-0
192467-0
192658-0
192758-5
7-5/8
——–
——–
192470-0
192661-0
192761-5
8-5/8
——–
——–
192473-0
——–
192764-5
9-5/8
——–
——–
——–
——–
192767-5
10-3/4
——–
——–
——–
——–
192773-5
11-3/4
——–
——–
——–
——–
192873-5
RETAINER SCREW Fits All Pipe Sizes
192034
192034
192034
192034
192034
BOP TYPE
A, B, E, 39
A, B, E, 39
A, B, E, LWS, 39
A, B, E, LWS, 39
A, B, E, LWS
SHAFFER is a registered trademark of The Shaffer Co.
Revision: March 2010
37
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 39 & 48 RAMS & CARRIERS (COMPATIBLE WITH SHAFFER TYPE B, E, & LWS BOPS)
TOWNSEND manufactures Ram Blocks and Carriers to fit Shaffer Type B, E, LWS, and SL Blowout Preventers. All TOWNSEND Ram Blocks and Carriers meet OEM requirements and are backed by material certification and traceability records. Each Block and Carrier is tested to ensure product reliability and strength. TOWNSEND Ram Rubbers are offered with Ram Sub Assemblies and are formulated with TOWNSEND’S own elastomers to ensure strength and durability in field applications.
RAM SIZE
10” x 3M TYPE 39
11” x 5M TYPE 48
12” x 3/5M TYPE 48
O.D. PIPE SIZE
RAM BLOCK
RAM BLOCK SUB ASSEMBLY
RAM BLOCK
RAM BLOCK SUB ASSEMBLY
RAM BLOCK
RAM BLOCK SUB ASSEMBLY
C.S.O.
192415
192474
192615
193640
192719
192830
2-3/8”
192424
192477
192618
193641
192721
192831
2-7/8”
192427
192478
192621
193642
192724
192832
3-1/2”
192430
192479
192624
193643
192727
192833
4”
192433
192480
192627
193644
192730
192834
4-1/2”
192439
192482
192630
193645
192733
192835
5”
192445
192484
192636
193647
192739
192837
5-1/2”
192451
192486
192642
193649
192742
192838
6-5/8”
——–
——–
192654
193653
192754
192842
7”
——–
——–
192657
193654
192757
192643
7-5/8”
——–
——–
192660
193655
192760
192844
8-5/8”
——–
——–
——–
——–
192763
192845
9-5/8”
——–
——–
——–
——–
192766
192846
10-3/4”
——–
——–
——–
——–
192772
192848
RETRACTOR SCREW
192209
192209
192209
192209
192209
192209
RAM CARRIER
192414
192414
192614
192614
192718
192718
NOTE:
Block Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber to Block Screws only.
SHAFFER is a registered trademark of The Shaffer Co.
Revision: March 2010
38
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 82 RAM RUBBERS (COMPATIBLE WITH SHAFFER STYLE LWS BOPS)
TOWNSEND Type 82 Ram Rubbers are designed to fit Shaffer 71/16” x 3M, 5M, 10M, and 15M LWS Blowout Preventers. TOWNSEND’S specially formulated 82 compound has been field tested and has proven to be superior to other styles available in the marketplace. TOWNSEND has specifically designed this Ram Rubber for long endurance under high pressure service operations. TOWNSEND also offers 7-1/16” offset and dual offset Ram Rubbers upon request. Both Ram Rubbers in a pair of dual offset Ram Rubbers have the same part number. Single offset Ram Rubbers have a different part number for the left and the right Ram Rubber.
7" TYPE 82
OD PIPE SIZE
PART NO.
CSO
TM8250-7RR
*
1.660
TM8251-7RR
*
1.900
TM8252--7RR
*
2-1/16”
TM8253-7RR
*
2-3/8”
TM8254--7RR
*
2-7/8”
TM8255-7RR
*
3-1/2”
TM8256-7RR
*
4”
TM8269-7RR
*
4-1/2”
TM8257-7RR
*
5”
TM8260-7RR
*
5-1/2”
TM8258-7RR
*
Retainer Screw
TM82-5545
*
SEE NOTE
TOWNSEND Type 82 Ram Blocks and Retractor Screws are also available.
* NOTE: Two Retainer Screws, Part #TM82-5545 are included with each Ram Rubber.
* NOTE:
Standard pipe sizes that are available at most stocking locations. Other sizes stocked at TOWNSEND main warehouse locations.
SHAFFER is a registered trademark of The Shaffer Co.
Revision: March 2010
39
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 7" 82 RAM BLOCKS & CARRIERS (COMPATIBLE WITH SHAFFER LWS )
TOWNSEND Type 7" 82 Ram Blocks and Carriers are designed to fit Shaffer 6” LWS Blowout Preventers. All TOWNSEND Ram Blocks and Carriers are backed by TOWNSEND’S own strict Quality Program that complies with ISO and API regulations. Each Block and Ram Carrier is supported by material certifications and traceability records. TOWNSEND also offers Type 7" 82 Ram Rubbers that have been specially formulated for long endurance and longevity under high pressure service operations. All TOWNSEND Ram Blocks and Carriers are made for H2S service. The Retractor Screws are the only items that have to be changed for H2S operations. TOWNSEND offers the Type 7" 82 Ram Block in standard pipe sizes and Offset and Dual Offset.
6” TYPE 61 RAMS PIPE SIZE
RAM BLOCK
RAM SUB ASSEMBLY
CSO
TM8250-7RB
TM8250-7SA
1.660
TM8251-7RB
TM8251-7SA
1.900
TM8252-7RB
TM8252-7SA
2-3/8”
TM8254-7RB
TM8254-7SA
2-7/8”
TM8255-7RB
TM8255-7SA
3-1/2”
TM8256-7RB
TM8256-7SA
4”
TM8269-7RB
TM8269-7SA
4-1/2”
TM8257-7RB
TM8257-7SA
5”
TM8260-7RB
TM8260-7SA
5-1/2”
TM8258-7RB
TM8258-7SA
H2S Trim Retractor Screw
TM8211-7RS
TM8211-7RS
Carrier
TM8200-7RC
TM8200-7RC
Contact a TOWNSEND representative for a list of additional LWS Blowout Preventer replacement parts that are available.
NOTE: Ram Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber Screws only.
SHAFFER is a registered trademark of The Shaffer Co.
Revision: March 2010
40
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 82 (COMPATIBLE WITH SHAFFER LWS)
TOWNSEND manufactures replacement Type 82Ram Rubbers to fit Shaffer LWS Blowout Preventers. TOWNSEND’s specially formulated compound was specifically designed for long endurance under high pressure service operations, for both deep land drilling and subsea service. TOWNSEND offers standard pipe and casing sizes at each of our store and agent locations for easy accessibility to our customers. Offset and dual bore pipe sizes are available upon special request.
Revision: March 2010
O.D. PIPE INCHES
11 X 3M TYPE 82
11 X 5M TYPE 82
13-5/8 X 3/5M TYPE 82
C.S.O.
TM8250-113RR
TM8250-115RR
TM8250-13RR
1.315
----
----
----
1.660
TM8251-113RR
TM8251-115RR
TM8251-13RR
1.900
TM8252-113RR
TM8252-115RR
TM8252-13RR
2-1/16
TM8253-113RR
TM8253-115RR
TM8253-13RR
2-3/8
TM8254-113RR
TM8254-115RR
TM8254-13RR
2-7/8
TM8255-113RR
TM8255-115RR
TM8255-13RR
3-1/2
TM8256-113RR
TM8256-115RR
TM8256-13RR
4
TM8269-113RR
TM8269-115RR
TM8269-13RR
4-1/2
TM8257-113RR
TM8257-115RR
TM8257-13RR
5
TM8260-113RR
TM8260-115RR
TM8260-13RR
5-1/2
TM8258-113RR
TM8258-115RR
TM8258-13RR
6-5/8
TM8259-113RR
TM8259-115RR
TM8259-13RR
7
TM8262-113RR
TM8262-115RR
TM8262-13RR
7-5/8
TM8261-113RR
TM8261-115RR
TM8261-13RR
8-5/8
TM8263-113RR
TM8263-115RR
TM8263-13RR
9-5/8
——–
——–
TM8264-13RR
10-3/4
——–
——–
TM8265-13RR
BOP TYPE
LWS ** B & E
LWS ** B & E
SL, LWS ** B & E
41
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 82 RAMS & CARRIERS (COMPATIBLE WITH SHAFFER TYPE LWS, SL BOPS)
TOWNSEND manufactures Type 82 Ram Blocks to fit Shaffer Type LWS and TOWNSEND 82” Blowout Preventers. TOWNSEND offers this Block only in H2S Trim at Standard Trim prices. All TOWNSEND Ram Blocks are tested for strength and have supporting material certifications and traceability records. TOWNSEND also offers Offset and Dual Offset Blocks along with other pipe sizes not listed.
RAM SIZE
11” x 3M TYPE 82
11” x 5M TYPE 82
13-5/8” x 5M TYPE 82
O.D.
RAM
RAM SUB
RAM
RAM SUB
RAM
RAM SUB
C.S.O.
TM8250-113RB
TM8250-113SA
TM8250-115RB
TM8250-115SA
TM8250-13RB
TM8250-13SA
2-3/8”
TM8254-113RB
TM8254-113SA
TM8254-115RB
TM8254-115SA
TM8254-13RB
TM8254-13SA
2-7/8”
TM8255-113RB
TM8255-113SA
TM8255-115RB
TM8255-115SA
TM8255-13RB
TM8255-13SA
3-1/2”
TM8256-113RB
TM8256-113SA
TM8256-115RB
TM8256-115SA
TM8256-13RB
TM8256-13SA
4”
TM8269-113RB
TM8269-113SA
TM8269-115RB
TM8269-115SA
TM8269-13RB
TM8269-13SA
4-1/2”
TM8257-113RB
TM8257-113SA
TM8257-115RB
TM8257-115SA
TM8257-13RB
TM8257-13SA
5”
TM8260-113RB
TM8260-113SA
TM8260-115RB
TM8260-115SA
TM8260-13RB
TM8260-13SA
5-1/2”
TM8258-113RB
TM8258-113SA
TM8258-115RB
TM8258-115SA
TM8258-13RB
TM8258-13SA
6-5/8”
TM8259-113RB
TM8259-113SA
TM8259-115RB
TM8259-115SA
TM8259-13RB
TM8259-13SA
7”
TM8262-113RB
TM8262-113SA
TM8262-115RB
TM8262-115SA
TM8262-13RB
TM8262-13SA
7-5/8”
TM8261-113RB
TM8261-113SA
TM8261-115RB
TM8261-115SA
TM8261-13RB
TM8261-13SA
8-5/8”
TM8263-113RB
TM8263-113SA
TM8263-115RB
TM8263-115SA
TM8263-13RB
TM8263-13SA
9-5/8”
——–
——–
——–
——–
TM8264-13RB
TM8264-13SA
10-3/4”
——–
——–
——–
——–
TM8265-13RB
TM8265-13SA
H2S RETRACTOR SCREW
TM8211-11RS
TM8211-11RS
TM8211-11RS
TM8211-11RS
TM8211-11RS
TM8211-11RS
RAM CARRIER
TM8200-113RC
-----
TM8200-115RC
-----
TM8200-13RC
----
NOTE:
Ram Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber Screws only.
SHAFFER is a registered trademark of The Shaffer Co.
Revision: March 2010
42
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 75 RAMS & CARRIERS (COMPATIBLE WITH SHAFFER SL BOPS) TOWNSEND manufactures Type 75 Ram Blocks and Carriers to fit Shaffer Type SL Blowout Preventers. All TOWNSEND Ram Blocks and Carriers are tested for strength, before distribution, to guarantee the customer a quality product. Each set of Blocks and Carriers meet API, ISO, and TOWNSEND’S own strict Quality Programs. All Blocks and Carriers have material certifications and traceability records. TOWNSEND Ram Blocks, Carriers, and Ram Rubbers are made for H2S service. Retractor Screws are the only items that have to be changed from Standard Trim to H2S service. TOWNSEND also offers Ram Blocks and Ram Rubbers in Dual and Offset sizes. Contact a TOWNSEND representative for additional breakdown. NOTE:
Ram Sub Assembly consists of Ram Block, Ram Rubber, and Retainer Screws only.
RAM SIZE
11” x 10M TYPE 75
13-5/8” x 10M TYPE 75
PIPE SIZE
RAM BLOCK
RAM ASSEMBLY
RAM BLOCK
RAM ASSEMBLY
C.S.O.
133110
133109
134206
134203
2-3/8”
133130
133129
134226
134223
2-7/8”
133135
133134
134231
134228
3-1/2”
133053
133052
131843
131842
4”
133056
133055
131846
131845
4-1/2”
133059
133058
131736
131848
5”
133062
133061
131721
131850
5-1/2”
133065
133064
131853
131852
6-5/8”
133168
133167
134269
134266
7”
133173
133172
134274
134271
7-5/8”
133178
133177
134279
134276
8-5/8”
133189
133188
134289
134286
9-5/8”
——–
——–
134294
134291
10-3/4”
——–
——–
134299
134296
STANDARD RETRACTOR SCREW
137881
137881
137881
137881
H2S RETRACTOR SCREW
142061 (CSO - 7”) 142065 (7-5/8” - 8-5/8”)
142061 (CSO – 7”) 142065 (7-5/8” - 8-5/8”)
142061
142061
RAM CARRIER
131685
131685
138180
138180
SHAFFER is a registered trademark of The Shaffer Co.
Revision: March 2010
43
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE "ST" RAM RUBBERS TOWNSEND’S Type "ST" Ram Rubbers are specially formulated from a compound adaptable to most H2S gases. Years of experience and field tests have helped TOWNSEND produce a durable, long lasting product under severe working conditions. TOWNSEND boasts that its quality is as good as or better than the OEM product, at a competitive price. TOWNSEND also offers dual offset and offset Ram Rubbers upon request.
O.D. PIPE
7-1/16” BORE
11” BORE
13-5/8” BORE
16-3/4” BORE
21-1/4” x 2M
21-1/14” BORE
C.S.O.
ST-19473-1
ST-19243-3
ST-19504-3
ST-38853-1
ST-19249-3
ST-40962-19
1.315
ST-19473-2
ST-19243-8
ST-31215-23
——–
——–
——–
1.660
ST-19473-3
ST-19243-6
ST-31215-22
——–
——–
——–
1.900
ST-19473-4
ST-19243-5
ST-31215-28
ST-38853-21
——–
——–
2-1/16
ST-19473-7
ST-19243-4
ST-31215-20
——–
——–
——–
2-3/8
ST-19473-5
ST-19243-1
ST-31215-1
ST-38853-2
——–
ST-40962-1
2-7/8
ST-19473-6
ST-19243-2
ST-31215-2
——–
ST-31228-2
——–
3-1/2
ST-19474-1
ST-19374-1
ST-31215-3
ST-38853-4
ST-31228-3
ST-40962-3
4
ST-19474-2
ST-19374-2
ST-31215-4
ST-38853-5
ST-31228-4
ST-40962-4
4-1/2
ST-19474-3
ST-19374-3
ST-31215-5
ST-38853-6
ST-31228-5
ST-40962-5
5
ST-19474-4
ST-19374-5
ST-31215-7
ST-38853-8
ST-31228-7
ST-40962-7
5-1/2
ST-19474-6
ST-19375-1
ST-31215-8
ST-38853-9
ST-31228-8
ST-40962-8
6-5/8
——–
ST-19375-3
ST-31215-10
ST-38853-11
ST-31228-10
ST-40962-10
7
——–
ST-19375-4
ST-31215-11
ST-38853-12
ST-31228-11
ST-40962-11
7-5/8
——–
ST-19375-5
ST-19506-4
ST-38853-13
ST-31228-12
ST-40962-12
8-5/8
——–
ST-19375-6
ST-19506-5
ST-38853-15
ST-31228-14
ST-40962-13
9-5/8
——–
——–
ST-19506-7
ST-38853-17
ST-31228-16
ST-40962-15
10-3/4
——–
——–
ST-38372
ST-38853-18
ST-31228-17
ST-40962-20
11-3/4
——–
——–
ST-614227-1
ST-38853-19
ST-31228-18
ST-40962-21
13-3/8
——–
——–
——–
ST-38853-20
ST-19252-4
ST-40962-22
13-5/8
——–
——–
——–
——–
ST-31228-24
ST-40962-24
13-3/4
——–
——–
——–
——–
ST-31228-19
——–
16
——–
——–
——–
——–
ST-31228-21
ST-40962-23
18-5/8
——–
——–
——–
——–
ST-31228-25
——–
ST-19475
ST-19270
ST-19517
ST-38863
ST-19514
ST-40972
UPPER SEAL Fits All Pipe Sizes
CAMERON and Type U are registered trademark of the Cameron Co.
Revision: March 2010
44
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE "ST" RAM BLOCKS TOWNSEND manufactures replacement Ram Blocks for the Type "ST" Blowout Preventers. All TOWNSEND manufactured Blocks are made to OEM specifications and from certified materials. All Ram Blocks are tested and have traceability documentation, and meet ISO, API, and TOWNSEND’S own Quality Programs. offers the Type "ST" Ram Blocks in a variety of Preventer working pressures and pipe sizes.
TOWNSEND
ASSEMBLY
BLOCK
TOWNSEND Ram Block Part Number is for Block only. TOWNSEND Assembly Part Number is for Block, Top Seal, and Ram Rubber.
7-1/16 x 3/5/10/15M
13-5/8 x 3/5/10M
11 x 3/5/10M
PIPE SIZE
RAM BLOCK
ASSEMBLY
RAM BLOCK
ASSEMBLY
RAM BLOCK
ASSEMBLY
CSO
ST-44102-01
ST-44226-01
ST-44118-01
ST-44233-01
ST-44147-01
ST-44244-01
1.660
ST-44102-03
ST-44226-05
ST-44118-02
ST-44233-02
ST-44148-05
ST-44244-04
1.900
ST-44102-04
ST-44226-06
ST-44118-03
ST-44233-03
ST-44148-07
ST-44244-27
2-3/8
ST-44102-05
ST-44226-08
ST-44118-05
ST-44233-05
ST-44148-01
ST-44244-19
2-7/8
ST-44102-06
ST-44226-09
ST-44118-06
ST-44233-06
ST-44148-02
ST-44244-06
3-1/2
ST-44104-01
ST-44226-10
ST-44119-01
ST-44233-07
ST-44149-01
ST-44244-07
4
ST-44104-02
ST-44226-11
ST-44119-02
ST-44233-09
ST-44149-02
ST-44244-08
4-1/2
ST-44104-03
ST-44226-12
ST-44119-03
ST-44233-10
ST-44149-03
ST-44244-09
5
ST-44104-04
ST-44226-13
ST-44119-05
ST-44233-13
ST-44150-02
ST-44244-11
5-1/2
ST-44104-07
ST-44226-14
ST-44120-01
ST-44233-14
ST-44150-03
ST-44244-12
6-5/8
——–
——–
ST-44120-03
ST-44233-17
ST-44150-05
ST-44244-22
7
——–
——–
ST-44120-04
ST-44233-18
ST-44151-01
ST-44244-14
7-5/8
——–
——–
ST-44120-05
ST-44233-19
ST-44151-02
ST-44244-15
8-5/8
——–
——–
ST-44120-06
ST-44233-20
ST-44151-03
ST-44244-16
9-5/8
——–
——–
——–
——–
ST-44151-05
ST-44244-17
10-3/4
——–
——–
——–
——–
ST-44152-01
ST-44244-18
11-3/4
——–
——–
——–
——–
ST-614208-01
ST-44244-26
NOTE: TOWNSEND manufactures the same series in Shear Ram Blocks. Contact a TOWNSEND representative for additional information.
CAMERON and Type U are registered trademarks of the Cameron Co.
Revision: March 2010
45
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE “VBR” RAM RUBBERS & BLOCKS
TOWNSEND’S Variable Bore Ram Rubbers (“VBR”) are designed to seal around a variety of pipe sizes. TOWNSEND’S also manufactures the “VBR” Ram Block in both 11” and 13-5/8” sizes to fit the "ST" Blowout Preventers. TOWNSEND’S Finger Insert design rotates as the hydraulic pressure is applied and the Ram Blocks begin to close allowing the Ram Rubber to seal around a variety of pipe sizes and eliminating changing Ram Rubbers each time you change pipe size. TOWNSEND’S “VBR” Rubbers have been field tested to confirm durability.
ITEM
DESCRIPTION
11” 5M/10M
13-5/8” 5M/10M
1
Assembly 2-7/8’ - 5”
ST-645360-01
ST-645166-01
1
Assembly 4-1/2” – 7”
———–
ST-46675-01
2
Ram Block 2-7/8” - 5”
ST-644836-01
ST-644744-01
2
Ram Block 4-1/2” - 7”
———–
ST-46671-01
3
VBR 2-7/8” - 5”
ST-644926-01
ST-645089-01
3
VBR 4-1/2” - 7”
———–
ST-644924-01
4
Top Seal (All)
ST-19270
ST-644223-02
Note: TOWNSEND “VBR” Rubbers and Top Seals do not fit Standard Type U Ram Blocks, but are interchangeable with OEM Rubbers & Blocks.
1
4 3
2
CAMERON is a registered trademark.
Revision: March 2010
46
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE “ST” SHEAR RAM BLOCKS
TOWNSEND manufactures "SBR" style Ram Blocks and Ram Rubbers for TOWNSEND Type "ST" Blowout Preventers. (SBR – Shear Blind Rams) TOWNSEND Type ST Shear Blind Ram Blocks meet OEM standards, and comply with TOWNSEND’S own strict Quality Assurance Program. Each set of Ram Blocks are backed by material certifications and inspection documentation. All Ram Blocks are made from specified materials to ensure resistance to H2S gases.
7-1/16 x 5/10/15M DESCRIPTION
PART NO.
Right Side Packer Paddle
ST-49358-01
Left Side Packer Paddle
ST-49358-02
Combination Packer
ST-49347-01
Top Seal
1 2 3 4 5
4
Right Side Packer Left Side Packer Blade Packer Top Seal Upper Block 1
5
ST-19475
Upper Block
ST-46210-01
Lower Block
ST-46212-02
Upper Assembly
ST-46792-01
Lower Assembly
ST-46792-02
2
NOTE: 7-1/16 x 5/10/15M Face Packer and Side Packer Rubbers are not illustrated in above view.
11 x 5/10M DESCRIPTION
13-5/8 x 5/10M PART NO.
DESCRIPTION
PART NO.
Right Side Packer
ST-46751-04
Right Side Packer
ST-46751-01
Left Side Packer
ST-46752-04
Left Side Packer
ST-46752-01
Blade Packer
ST-46910-04
Blade Packer
ST-46910-01
Top Seal
ST-19270
Top Seal
ST-19517
Upper Block
ST-49009-01
Upper Block
ST-46749-01
Lower Block
ST-49010-01
Lower Block
ST-46750-01
Upper Assembly
ST-49392-01
Upper Assembly
ST-46748-01
Lower Assembly
ST-49392-02
Lower Assembly
ST-46748-02
CAMERON and Type U are registered trademark of the Cameron Co.
Revision: March 2010
47
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND RETRACTOR SCREWS (COMPATIBLE WITH SHAFFER BOP’S)
TOWNSEND manufactures Retractor Screws to fit all the different types of Shaffer Blowout Preventers. TOWNSEND’S Retractor Screws are available in Standard Trim and H2S Trim. All TOWNSEND Retractor Screws are marked with a traceability number to guarantee product quality. Each Retractor Screw is backed up with traceability records and material certifications.
SERIES
RAM
BOP
STANDARD
H2S
7-1/16” x 5M
61 - 7" 82
LWS
(61)135848
9” x 5M
61
LWS
135848
135848
7-1/16” x 5M
39
39
192033
192033-S
11” x 3M
39
39
192209
192209-S
11” x 5M
39
39
192209
192209-S
12” x 3M
48
39
192209
192209-S
13-5/8” x 5M
48
48
192209
192209-S
11” x 3M
39
A
192209
192209-S
11” x 5M
39
A
192209
192209-S
12” x 3M
39
A
192209
192209-S
11” x 3M
70 - 82
B, E, LWS
(70) 135575
(70) 141200
11” x 5M
70 - 82
B, E, LWS
135575
(70) 141200
13-5/8” X 3M
70 - 82
B, E, LWS
135575
(70) 141200
13-5/8” x 5M
70 - 82
B, E, LWS
135575
(70) 141200
11” x 10M
75
SL (CSO – 7”)
137881
142061
11” x 10M
75
SL (7-5/8” - 8-5/8”)
133081
142065
13-5/8” X 10M
75
SL
137881
142061
(61)135848
TYPE 39
TYPE 70
TYPE 75
TOWNSEND also offers other Shaffer Blowout Preventer replacement parts for all the different style blowout preventers. Contact a TOWNSEND representative for a complete breakdown of other parts available.
SHAFFER is a registered trademark of the Shaffer Co.
Revision: March 2010
48
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND HINGE BRACKET ASSEMBLY (COMPATIBLE WITH SHAFFER LWS BOP’S)
1 8 5
7 6 9
2
TOWNSEND manufactures replacement Hinge Brackets and Hinge Pins to fit Shaffer 7-1/16” x 3M through 13-5/8 x 5M LWS Blowout Preventers. TOWNSEND also offers an exchange program for used Hinge Brackets and offers rebuilt Hinge Brackets at a discounted price.
4 3
ITEM
DESCRIPTION
QTY
7-1/16” 3M
7-1/16” 5M
11” 3M
11” 5M
13-5/8” 3/5M
--
Hinge Pin Diameter (in.)
__
1-1/2
1-1/2
1-1/2
1-3/4
1-7/8
1
Hinge Bracket
1
TH7144
TH7144
TH7144
TH7144-11-5
TH7144-13
2
Hinge Pin
1
TH7151
TH7151
TH7151-11
TH7151-11-5
TH7151-13
3
Hinge Pin Plug
2
TH7113
TH7113
TH7113
TH7113
TH7113
4
O-Ring, Hinge Pin
10
TH7152
TH7152
TH7152
TH7152-11-5
TH7152-13
5
Cap Screw, Hinge Brkt. Sm.
4
(2) TH7146
TH7146
TH7146
TH7146-11-5
TH7146-11-5
5
Cap Screw, Hinge Brkt Lg.
2
TH7147
-----
-----
-----
-----
6
Plug, Hinge Bracket
4
TH7154
TH7154
TH7154
TH7154
TH7154
7
Dowel Pin
2
TH7145
TH7145
TH7145
TH7145-11-50
TH7145-11-5
8
Retainer, Hinge Pin
1
TH7153
TH7153
TH7153
TH7153
TH7153
9
Grease Fitting
1
TH7155
TH7155
TH7155
TH7155
TH7155
SHAFFER and LWS are registered trademarks of the Shaffer Co.
Revision: March 2010
49
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND “ST” METAL REPLACEMENT PARTS TOWNSEND manufactures all the metal expendable parts to fit a TOWNSEND’S ”ST” Blowout Preventer. All TOWNSEND expendable metal replacement parts meet API, ISO, and TOWNSEND’S own strict Quality Programs. All parts are stamped for material traceability requirements. All TOWNSEND replacement parts meet OEM requirements, and are plated with correct alloys for each components operating requirements. TOWNSEND stocks a large inventory of metal replacement parts for immediate distribution.
4
1 2 3 4 5 6
2
Operating Piston Operating Cylinder Ram Change Piston – Open Ram Change Piston – Close Ram Change Cylinder Locking Screw
3
6
1
5
TOWNSEND "ST" TYPE BLOWOUT PREVENTER SERIES
OPERATING PISTON *
OPERATING CYLINDER
RAM CHANGE PISTON (OPEN)
RAM CHANGE PISTON (CLOSE)
RAM CHANGE CYLINDER
LOCKING SCREW
7-1/16 x 3/5M
ST-30320 (O/S) ST-667940
ST-30274-2
ST-30324
ST-30325
ST-30273-2
ST-30326
7-1/16 x 10/15M
ST-30320 (O/S) ST-667940
ST-30274-2
ST-30324
ST-30325
ST-30273-2
ST-30326
11 x 3/5/10M
ST-30364 (O/S) ST-673178
ST-30274-3
ST-30362
ST-30363
ST-30273-3
ST-30365
12 x 3M
ST-30311 (O/S) ST-679816
ST-30274-1
ST-30310
ST-30309
ST-30273-1
ST-30307
13-5/8 x 5M
ST-30311 (O/S) ST-679816
ST-30274-1
ST-30310
ST-30309
ST-30273-1
ST-30307
13-5/8 x 10/15M
ST-31240 (O/S) ST-678512
ST-30274-1
ST-31239
ST-31238
ST-30273-1
ST-30307
16-3/4 x 5M
ST-38846 (O/S) ST-689562
ST-30274-6
ST-38847
ST-30848
ST-30273-6
ST-38901
20 x 2/3M
ST-30847 (O/S) ST-690058
ST-30274-4
ST-30848
ST-30849
ST-30273-4
ST-30846
CAMERON & Type U are registered trademark of The Cameron Co.
Revision: March 2010
* O/S denotes Old Style Operating Piston
50
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND BOP BONNET REBUILD KITS (COMPATIBLE WITH SHAFFER, HYDRIL & TOWNSEND BOP’S)
TOWNSEND manufactures all the replacement parts for most major Blowout Preventers, such as TOWNSEND, Cameron, Shaffer, Hydril, and WSI. To simplify ordering replacement parts, TOWNSEND has assembled Bonnet Rebuild Kits for Blowout Preventers. These kits consist of all the necessary components to rebuild a Blowout Preventer Bonnet, excluding the Door Seal, which is sold separately. TOWNSEND’S Kits consist of all the O’Rings, Lip Seals, Springs, and necessary Washers to rebuild a Bonnet. Major metal goods, such as Ram Shafts, Locking Screws, Pistons, and major brass components usually need not be replaced, and are offered separately.
TOWNSEND’S Bonnet Rebuild Kit cannot be compared with kits offered by OEM’s. TOWNSEND’S Kits exclude major expense items that usually do not need replacing. Each TOWNSEND Bonnet Rebuild Kit comes with an exploded view of the Bonnet with a listing of parts included in each Kit.
SHAFFER SENTINEL I STYLE SERIES
KIT NO.
7-1/16 x 3M HYD.
830000
7-1/16 x 3M MAN.
831000
SHAFFER TYPE B BOP
SHAFFER TYPE LWP BOP
SHAFFER TYPE E BOP
SERIES
KIT NO.
SERIES
KIT NO.
7-1/16 x 3/5M
860000
7-1/16 x 3/5M
870000
8 x 3/5M
860000
8 x 3/5M
870000
11 x 3/5M
860000
11 x 3/5M
870000
13-5/8 x 3M
860000
12 x 3M
870000
SERIES
KIT NO.
14 x 5M
860000
14 x 5M
870000
7-1/16 x 3M
840000
16 x 2M
860000
16 x 2M
870000
9 x 3M
841000
NOTE: Shaffer Type 39, XHP, and A Seal Kits are not offered because of movement, however, Bonnet Rebuild Kits are available upon request. Wellsite (WSI) Kits are also available.
CAMERON, HYDRIL, SHAFFER, SENTINEL and WSI are registered trademarks.
Revision: March 2010
51
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND BOP BONNET REBUILD KITS (COMPATIBLE WITH CAMERON, SHAFFER, HYDRIL & TOWNSEND BOP’S)
TOWNSEND TYPE 81 BOP
SHAFFER TYPE LWS BOP
SERIES
KIT NO.
SERIES
KIT NO.
7-1/16 X 3M MANUAL
TM8100
6 x 3/5M
880000
7-1/16 X 3M HYDRAULIC
TH8100
8 x 3/5M
881000
7-1/16 X 5M MANUAL
TM8100
11 x 3M
880000
7-1/16 X 5M HYDRAULIC
TH8100
11 x 5M
881000
9 X 3M MANUAL
TM8100
13-5/8 x 3/5M
9 X 3M HYDRAULIC
TH8100
9 X 5M HYDRAULIC
TH8100
TOWNSEND TYPE 82 BOP
SERIES
KIT NO.
7-1/16 x 3/5M
16206-06
8 x 3M
16036-103
8 x 5M
16036-105
881000
11 x 3M
16036-103
16-3/4 x 3M
881000
11 x 5M
16036-105
7-1/16 x 10/15M
882000
12 x 3M
16112-123
9 x 10M
883000
14 x 5M
17676-145
11 x 10M
884000
20 x 3M
885000
SERIES
KIT NO.
7-1/16 X 3/5M
TH7100
11 X 3M
TH7100
11 X 5M
TH7200
SERIES
KIT NO.
13-5/8 X 3/5M
TH7200
7-1/16 x 15M
890000
11 x 10M
891000
11 x 15M
892000
13-5/8 x 3M
893000
13-5/8 x 5M
894000
TOWNSEND TYPE 88 BOP SERIES
SHAFFER SL MANUAL LOCK BOP
KIT NO. TH9100
9 X 3M HYDRAULIC
TOWNSEND TYPE 99 BOP
CAMERON TYPE SS BOP
CAMERON TYPE QRC BOP SERIES
KIT NO.
7-1/16 x 3/5M
12327-06
8 x 3/5M
12331-10
11 x 3/5M
12331-10
12 x 3M
12333-12
16 x 2M
12333-12
18 x 2M
12333-12
HYDRIL WORKOVER BOP
13-5/8 x 10M
895000
SERIES
KIT NO.
13-5/8 x 15M
896000
SERIES
KIT NO.
7-1/16 X 5M HYDRAULIC
TH9950
16-3/4 x 5M
897000
7-1/16 x 5M
3105107
TOWNSEND “ST” BOP SERIES
KIT NO.
7-1/16 X3/5/10M
ST-644909-01
11 X 3/5/19M 13-5/8 X 3/5/10M
NOTE: Shaffer SL POS/LOCK Kits are available upon request. CAMERON TYPE U BOP
SERIES
KIT NO.
7-1/16 x 3/5M
3104728
11 x 3/5M
3104747
13-5/8 X 3/5M
3104766
ST-644909-02
SERIES
KIT NO.
ST-644909-03
7-1/16 x 3/5M
644909-01
7-1/16 x 10/15M
644909-01
11 x 3/5/10M
644909-02
13-5/8 x 3/5/10M
644909-03
SERIES
KIT NO.
16-3/4 x 5/10M
r ———–
7-1/16 x 10M
————
20 x 2M
r ———–
11 x 10M
————
13-5/8 X 10M
3104771
NOTE: For convenience, TOWNSEND has placed additional parts in some Shaffer Seal Kits so the Kit will fit more than one series BOP. Exploded view packing lists in each Kit will reveal which parts are to be discarded.
r AVAILABLE UPON REQUEST
NOTE: TOWNSEND does not include Door Seals with Seal Kits, they are sold separately.
Revision: March 2010
HYDRIL TYPE V BOP
52
HYDRIL TYPE X BOP
NOTE: Each Seal Kit is to repair one Bonnet. If repairing a Single BOP, it would require two (2) Kits.
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND BOP DOOR SEALS (COMPATIBLE WITH CAMERON, SHAFFER, HYDRIL, & TOWNSEND BOP’S)
TOWNSEND manufactures a wide range of Door Seals to fit all the different types and series of Cameron, Shaffer, Hydril, and WSI Blowout Preventers. TOWNSEND Door Seals are manufactured under a strict Quality program to insure that the product has the same material breakdown and characteristics as the OEM. Metal spring inserts and an Elastomeric Fabric are molded in specific Door Seals to correspond to OEM requirements. All TOWNSEND Door Seals meet TOWNSEND’S strict Quality Control Program and comply with API and ISO standards.
In some cases the OEM offers more than one version or style Door Seal for a particular Preventer. TOWNSEND also offers the different styles. TOWNSEND’S Part Number may not coincide with OEM’s current number. Contact a TOWNSEND representative for crossover.
SHAFFER TYPE 39 BOP SERIES
PART NO.
SHAFFER TYPE LWP BOP SERIES
PART NO.
7-1/16 x 3M
6-39
7-1/16 x 3M
30007
8 x 3M
8-39
8 x 3M
30030
10 x 3M
10-39
12 x 3M
12-39 SHAFFER TYPE E BOP
SHAFFER TYPE A BOP SERIES
PART NO.
7-1/16 x 3M
30212
7-1/16 x 5M
30212
8 x 3M
——–
8 x 5M
——–
10 x 3M
30196
SERIES
PART NO.
7-1/16 x 3M
30166
SHAFFER TYPE B BOP SERIES
PART NO.
6 x 3M
30166
6 x 5M
30166
8 x 3M
30167
8 x 5M
30167
11 x 3M
30168
11 x 5M
30168
12 x 3M
30169
14 x 5M
30169
16 x 2M
30170
7-1/16 x 5M
30166
8 x 3M
30167
8 x 5M
30167
11 x 3M
30168
SERIES
PART NO.
11 x 5M
30168
7-1/16 x 15M
115419
12 x 3M
30169
11 x 10M
131914
14 x 5M
30169
11 x 15M
131774
16 x 2M
30170
13-5/8 x 3M
130203
PART NO.
13-5/8 x 5M
130203
7-1/16 x 3M HYD.
30099
13-5/8 x 10M
135251
7-1/16 x 3 MAN.
30099
10 x 5M
30159
12 x 5M
30214
SHAFFER SENTINEL I STYLE SERIES
SHAFFER CHASOVOY BOP SERIES 7-1/16 x 3M/5M
PART NO. 185294
SHAFFER TYPE XHP BOP SERIES
PART NO.
13-5/8 x 15M
120386
7-1/16 x 15M
115566
16-3/4 x 5M
135253
9 x 10M
30008
16-3/4 x 10M
31079
11 x 10M
115211
18-3/4 x 10M
31038
30176
21-1/4 x 10M
31038
18-3/4 x 15M
121081
20 x 2M
CAMERON, HYDRIL, SHAFFER, SENTINEL, CHASOVOY and WSI are registered trademarks.
Revision: March 2010
SHAFFER SL – POS/MAN LOCK
53
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND BOP DOOR SEALS (COMPATIBLE WITH CAMERON, SHAFFER, HYDRIL, & TOWNSEND BOP’S) SHAFFER TYPE LWS BOP
TOWNSEND TYPE 99 HYDRAULIC
CAMERON TYPE SS BOP
SERIES
PART NO.
6 x 3M
30030
6 x 5M
30030
8 x 3M
30105
8 x 5M
30105
SERIES
PART NO.
11 x 3M
30106
7-1/16 X 3M TYPE 81-84
TH8121
11 x 5M
30008
7-1/16 X 9M TYPE 81-84
TM8121-8
10 x 5M
18492-15
12 x 3M
134014
7-1/16 X 3M TYPE 82-90
TH7114
12 x 3M
18493-4
13-5/8 x 5M
134014
TH7114
14 x 5M
18493-4
13-5/8 x 5M
135252 r
16 x 3M
135109
7-1/16 x 15M
30102
9 x 10M
30008
11 x 10M
115193
20 x 2/3M
30175
r NOTE: FIBER BACKED SEAL
SERIES
PART NO.
SERIES
PART NO.
7-1/16 X 5M
TH9906
6 x 3M
18493-5
6 x 5M
18493-5
8 x 3M
18492-15
8 x 5M
18492-15
10 x 3M
18492-15
TOWNSEND ANNURAM
7-1/16 X 5M TYPE 82-90
HYDRIL TYPE V BOP
CAMERON TYPE QRC BOP SERIES
PART NO.
6 x 3M
19061-1
6 x 5M
19061-1
8 x 3M
19061-2
8 x 5M
19061-2
10 x 3M
19061-3
SERIES
PART NO.
7-1/16 x 3M
3101158
7-1/16 x 5M
3101158
11 x 3M
3101163
11 x 5M
3101163
12 x 3M
3100782
13-5/8 x 5M
3100782
10 x 5M
19061-3
PART NO.
12 x 3M
19061-4
7-1/16 X 3M
TM8121
16 x 2M
19061-5
SERIES
PART NO.
7-1/16 X 5M
TM8121-5
18 x 2M
19061-5
7-1/16 x 10M
3102194
9 X 3M
TM8121-8
11 x 10M
3102456
9 X 5M
TM8121-5
13-5/8 X 10M
3101054
TOWNSEND TYPE 81 HYDRAULIC SERIES
TOWNSEND TYPE 81 MANUAL
HYDRIL TYPE X BOP
CAMERON TYPE U & TOWNSEND "ST" BOP SERIES
PART NO.
r STYLE
7-1/16 x 3/5/10M
19060-12
1
HYDRIL WORKOVER TYPE BOP SERIES
PART NO.
7-1/16 x 5M
3104704
SERIES
PART NO.
7-1/16 x 3/5/10M
46613-01
2
7-1/16 X 3M
TM8121
7-1/16 x 3/5/10M
644197-01
3
9 X 3M
TM8121-8
11 x 3/5/10M
19060-13
1
11 x 3/5/10M
46613-02
2
SERIES
PART NO.
11 x 3/5/10M
644197-02
3
7-1/16 x 3M MAN
0188
WSI MECHANICAL BOP
TOWNSEND TYPE 82 HYDRAULIC SERIES
PART NO.
7-1/16 X 5M
TH7114
11 X 3M
11 X 15M
49272-03
—–
7-1/16 x 3M HYD
0188
13-5/8 x 3/5/10M
19060-11
1
7-1/16 x 5M MEC
0188
13-5/8 x 3/5/10M
46613-03
2
7-1/16 x 5M HYD
0188
13-5/8 x 3/5/10M
644197-03
3
16-3/4 x 5/10M
19060-16
1
16-3/4 x 5/10M
46613-04
2
20 x 2/3M
19060-14
1
TH7114-11
11 X 5M
TH7114-11-5
13-5/8 X 3M/5M
TH7114-13
rCAMERON TYPE U STYLE NOTE STYLE
TOWNSEND TYPE 88 HYDRAULIC SERIES 9 X 3M
PART NO. TM9130
46613-06
20 x 2/3M
DESCRIPTION
1
Fabric Backed Seal
2
Metal Spring Inserts With O-Ring Seal
3
Metal Spring Inserts, Seal Is Square In Shape
2
CAMERON, HYDRIL, SHAFFER, and WSI are registered trademarks.
Revision: March 2010
54
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 84 PACKING UNITS (COMPATIBLE WITH HYDRIL GK STYLE UNITS) TOWNSEND manufactures replacement Packing Units to fit all Hydril GK Annular Blowout Preventers. TOWNSEND’S replacement Packing Units are available in both natural and synthetic compounds. TOWNSEND’S Packing Unit compounds have been developed specifically for longevity, but are flexible enough for complete closure in open hole situations. TOWNSEND’S Packing Units are tested before sale using API test standards in both open hole conditions and on drill pipe. All Packing Units are subject to a API drift test after performing Annular test on rubber to confirm that they will open back up to standard size. TOWNSEND is not just a rubber company, we take pride in the fact that we produce Blowout Preventer replacement parts, both metal and rubber. Years of experience and testing has helped TOWNSEND become a major player in the industry. NOTE: TOWNSEND 7-1/16 X 5M Type 84 Annular requires special seal kit and packing unit.
HEAD LOCKING SCREW RUBBER TYPE SERIES
PACKING UNIT
HEAD LOCKING SCREW
SYNTHETIC
NATURAL
7-1/16" x 3M
TA84-1078-S
TA84-1078-N
TA84-1607
7-1/16" X 5M TOWNSEND SHORTY
TA84-1078-S
TA84-1078-N
TA84-1607
7-1/16" x 5M HYDRIL GK
TA84-0667-S
TA84-0667-N
TA84-0695
9” x 3M
TA84-2603-S
TA84-2603-N
TA84-1607
11” x 3M
TA84-1818-S
TA84-1818-N
TA84-1607
11” x 5M
TA84-1401-S
TA84-1401-N
TA84-1407
13-5/8” x 3M
TA84-0732-S
TA84-0732-N
TA84-0695
13-5/8” x 5M
TA84-8148-S
TA84-8148-N
TA84-1407
HYDRIL & GK are registered trademark of The Hydril Co.
Revision: March 2010
55
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 84 SEAL KITS (COMPATIBLE WITH HYDRIL GK STYLE UNITS)
TOWNSEND manufactures replacement Seal Kits to fit all Hydril GK Annular Blowout Preventers. TOWNSEND’S Seal Kits are available both as individual Seals and as Kits. All TOWNSEND Seals are molded oversize, then ground back down to size to assure our Quality is the same standard as offered by the OEM.
HEAD GASKET SEAL UPPER PISTON SEAL
TOWNSEND also manufactures the Piston Indicator Seal, which is used on old style GK Annular Blowout Preventers to check the location of the piston. Newer model GK Annular Blowout Preventers do not require this seal.
PISTON HEAD SEAL
Note: TOWNSEND 7-1/16" X 5M TYPE 84 requires special seal kit and packing unit.
LOWER PISTON SEAL PISTON INDICATOR SEAL
SERIES
HEAD GASKET SEAL
UPPER PISTON SEAL
PISTON HEAD SEAL
LOWER PISTON SEAL
COMPLETE SEAL KIT
PISTON INDICATOR SEAL
7-1/16” x 3M
TA84-1602
TA84-1603
TA84-1604
TA84-5614
TA84-0683
TA84-9644
7-1/16" X 5M TOWNSEND 84
TA84-1602
TA84-1603
TA84-1604
TA84-5614
TA84-0683
TA84-9644
7-1/16” x 5M HYDRIL GK
TA84-0690
TA84-0689
TA84-0688
TA84-0705
TA84-0684
TA84-9644
9” x 3M
TA84-2868
TA84-2870
TA84-2871
TA84-2869
TA84-0685
TA84-9644
9” x 5M
TA84-3508
TA84-2599
TA84-0735
TA84-0689
TA84-0686
TA84-9644
11” x 3M
TA84-1809
TA84-1808
TA84-1807
TA84-1604
TA84-0687
TA84-9644
11” x 5M
TA84-1402
TA84-1403
TA84-0736
TA84-2599
TA84-0688
TA84-9644
13-5/8" x 3M
TA84-0738
TA84-0736
TA84-0737
TA84-0735
TA84-0689
TA84-9644
13-5/8” x 5M
TA84-8150
TA84-8151
TA84-8152
TA84-8165
TA84-0690
TA84-9644
13-5/8” x 5M Latched Head
TA84-1738
TA84-8151
TA84-8152
TA84-8165
TA84-0691
TA84-9644
QTY REQ’D
1
2
2
2
1
N/A
HYDRIL & GK are registered trademark of The Hydril Co.
Revision: March 2010
56
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 90 ANNULAR PACKING UNITS (COMPATIBLE WITH SHAFFER ANNULAR BOP’S)
TOWNSEND manufactures replacement Packing Units to fit all Shaffer style Annular Blowout Preventers. The unique design of the Annular unit allows it to open and close a greater number of times compared to other types of Annular units. All TOWNSEND’S replacement Annular Units are tested before sale using API test standards. TOWNSEND’S replacement Units are available in both synthetic and natural rubber. Other compounds are available for different applications. Each Unit is manufactured using compounds specifically developed by TOWNSEND through years of experience and field testing for longevity and durability.
PART NO.
SERIES BOP
RUBBER TYPE
TOWNSEND is not just another rubber company, we take pride in the fact that we are one of the largest full line Blowout Preventer replacement part manufacturers in the world.
TA90-0847
7-1/16” x 3M/5M
SYNTHETIC
TA90-0848
7-1/16” x 3M/5M
NATURAL
Our 30 years of experience in manufacturing both metal and rubber replacement parts for the oil industry has helped TOWNSEND become a leader in the replacement part business.
TA90-0996
9” x 3M/5M
SYNTHETIC
TA90-2272
9” x 3M/5M
NATURAL
TOWNSEND’S high standard of Quality Control guarantees each part TOWNSEND manufactures to be free from defect due to workmanship and material when used in the service and pressure range for which they were manufactured.
TA90-0578
11” x 3M
SYNTHETIC
TA90-0579
11” x 3M
NATURAL
TA90-0810
11” x 5M
SYNTHETIC
TA90-0809
11” x 5M
NATURAL
TA90-0576
13-5/8” x 3M/5M
SYNTHETIC
TA90-0577
13-5/8” x 3M/5M
NATURAL
SHAFFER and Spherical are registered trademarks of The Shaffer Co.
Revision: March 2010
57
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
PACKING UNIT
ANUFLEX®
(COMPATIBLE WITH SHAFFER ANNULAR BOP’S) (PATENTED)
TOWNSEND’S ANUFLEX Packing Unit has a group of patented curved metal segments, spaced apart at regular intervals imbedded in the Unit, instead of the conventional one piece segments furnished by other manufacturers. TOWNSEND’S unique hinge design allows the Unit to conform and flex with a lesser amount of resistance than conventional Units, which allows for more opens and closures, and a longer life cycle. The pivotability of the upper portion of each segment, relative to the base plate, limits the force exertable by the element on a drill string component.
UPPER SEGMENT
The upward, pivotal motion of the heel portion of the base plate feeds rubber upwards and radially inwards to compensate for wear of rubber in the bore walls of the Unit, where most conventional Units begin to fail. Other Annular Units have fixed metal segments molded into the rubber in a circular hemispherical cavity. The segments are pushed upwards by hydraulic piston pressure in a spherical cavity forcing rubber to cold flow inwards effecting a seal around the drill pipe. Since the metal segment is fixed, the upper, inner edge of the fixed segment can make contact with drill pipe and can damage it in certain conditions.
BASE PLATE
TOWNSEND’S ANUFLEX segment is made of two parts which are moveable with respect to one another. The freedom of one part with respect to the other limits the force which the metal segments may exert on drill pipe as the hydraulic piston moves the sealing element into a closed position.
UPPER SEGMENT
BASE PLATE
SHAFFER and Spherical are registered trademarks of The Shaffer Co.
Revision: March 2010
58
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
PACKING UNIT
ANUFLEX®
(COMPATIBLE WITH SHAFFER ANNULAR BOP’S) (PATENTED)
TOWNSEND’S ANUFLEX Units function particularly well during stripping operation when the hinged segment allows the rubber to cold flow more freely than conventional segments. The design of the segment allows the smaller portion of each segment base plate to pivot, functioning as a toe plate, supporting and directing the cold flow of rubber upwards towards the sealing bore of the element. This action increases the longitudinal length of the seal, greatly improving the capability of the seal to contain higher pressures than standard segmented units.
OPEN POSITION OF SEGMENTS
CLOSING POSITION OF SEGMENTS HINGING TO CREATE LESS RESISTANCE
OPEN HOLE CLOSURE WITH NO DRILL PIPE SEGMENTS CONFORM UNIFORMLY WITH LESS RESISTANCE "LONGER WEAR AND LIFE"
Additionally, the hinging capabilities of the segment provides a more effective means of feeding rubber into the seal area, compensating for rubber wear due to abrading action on the drill pipe having been pulled through the bore of the sealing elements greatly increasing the effective operational life of the Unit.
PART NO.
SERIES BOP
RUBBER TYPE
TA90-0847-AF
7-1/16” x 3M/5M
SYNTHETIC
TA90-0848-AF
7-1/16” x 3M/5M
NATURAL
TA90-0996-AF
9” x 3M/5M
SYNTHETIC
TA90-2272-AF
9” x 3M/5M
NATURAL
TA90-0578-AF
11” x 3M
SYNTHETIC
TA90-0579-AF
11” x 3M
NATURAL
TA90-0810-AF
11” x 5M
SYNTHETIC
TA90-0809-AF
11” x 5M
NATURAL
TA90-0576-AF
13-5/8” x 3M/5M
SYNTHETIC
TA90-0577-AF
13-5/8” x 3M/5M
NATURAL
SHAFFER and Spherical are registered trademarks of The Shaffer Co.
Revision: March 2010
59
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND “BISON” ACCUMULATORS MANUFACTURED EXCLUSIVELY BY BURNSCO BOP – API 16D-0020
DRILLING & WORKOVER ACCUMULATORS HIGH PRESSURE TESTING SYSTEMS – SPARE PARTS THE “BISON” ACCUMULATORS ARE AVAILABLE IN A VARIETY OF STYLES AND SIZES OR CAN BE BUILT TO CUSTOMER’S SPECIFICATIONS. THE “BISON” ACCUMULATORS RANGE FROM WORKOVER STYLE UNITS TO THE LARGER 210 GALLON ACCUMULATORS USED IN THE DRILLING INDUSTRY. ALL “BISON” ACCUMULATORS ARE DESIGNED WITH 11 OR 15 GALLON SEPARATOR BOTTLES AND ARE AVAILABLE WITH GASOLINE, DIESEL, AIR OR ELECTRIC OPERATED MOTORS.
Revision: March 2010
60
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
HIGH PRESSURE TEST UNITS
SKID MOUNTED TEST UNITS or PORTABLE TEST UNITS SELF CONTAINED TEST UNITS (TEST CHARTS AVAILABLE WITH UNITS)
TOWNSEND skid mounted High Pressure Test units are available in a variety of working pressures up to 30,000 lbs test pressure. The test equipment is available in unit mounted, portable, skid mounted, and self contained 50 gallon tank skid mounted units. TOWNSEND test units are specifically manufactured for testing BOP Stacks, Valves, Chokes, Kill Lines and Christmas Trees. (Air and water supply are required.) Chart Recorders and High Pressure Hose assemblies are also available upon request. Test units are manufactured to customers specifications and instructions.
Revision: March 2010
61
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND ACCUMULATOR PARTS FOR BURNSCO, KOOMEY, STEWART & STEVENSON, SHAFFER, & VALVCON ACCUMULATORS
TOWNSEND offers a wide range of Accumulator replacement parts to fit Burnsco, Koomey, Stewart & Stevenson, Shaffer, and Valvcon Accumulators. TOWNSEND’S parts will interchange with the Accumulators listed above. TOWNSEND also offers complete Accumulators manufactured to customers specifications or can rebuild or expand customers original Accumulator. Purchase of used or reconditioned Accumulators are available from a sister company.
PART NO.
PART NO.
DESCRIPTION
0902-0100
Charging & Guage Assembly
0902-0101
Air Chuck
0902-0300
Bladder Pull Rod (All)
0910-1303
Junction Box Gasket (16 Hole)
DESCRIPTION
1111-3100
1” Full Flow Air Operated Regulator
1242-0100
1/4” Air Valve For Remote Stand
1330-4103
Remote Valve Handle
1330-4104
4-Way Valve Handle
1330-4100
1” 4-Way Valve
1330-4101
Rotor For 1” 4-Way Valve
1000-3101
Valve Guard
1000-4105
Anti-Extrusion Ring
1320-4197
4-Way Valve Repair Kit
1000-7102
10 Gallon Bladder
1390-0100
2-Way Bypass Valve
1000-9102
11 Gallon Bladder
1390-1101
Bypass Valve Rotor
1000-9464
15 Gallon Bladder
1390-1199
Bypass Valve Repair Kit
Charging Valve (80 Gallon Ball)
1601-1100
1/2” Inline Check Valve
1010-1102
MKR Manual Regulator 3/4” Full Flow w/1” Outlet
1601-3100
1” Inline Check Valve
1110-2100
1700-1100
3/4” Relief Valve (1750 PSI)
1110-2199
Regulator Valve Repair Kit (For 1110-2100)
1700-2100
3/4” Relief Valve (3500 PSI)
1110-3100
MKR Manual Regulator 1” Full Flow w/1-1/2” Outlet
1700-3100
3/4” Relief Valve (5500 PSI)
Regulator Valve Repair Kit (For 1110-3100)
2200-0100
Electric Pressure Switch
1110-3199
2200-0199
Repair Kit – Electric Pressure Switch
KOOMEY, STEWART & STEVENSON, SHAFFER, and VALVCON are registered trademarks.
Revision: March 2010
62
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND ACCUMULATOR PARTS FOR BURNSCO, KOOMEY, STEWART & STEVENSON, SHAFFER, & VALVCON ACCUMULATORS
PART NO.
DESCRIPTION
2250-0100
Air Pressure Switch (3000 PSI)
2250-0199
Repair Kit – Air Pressure Switch
3000-2118
Crosshead Stud Seal – Union Pump
3000-2122
Valve – Union Triplex Pump
3000-2123
Valve Seat – Union Triplex Pump
3000-2124
Valve Spring – Union Triplex Pump
3000-2128
Discharge Valve Cover Gasket Union Triplex Pump
3000-2129
Stuffing Box Gasket Union Triplex Pump
3000-3106
3/4” Plunger Packing
3001-4104
7/8” Plunger Packing
3001-5104
1” Plunger Packing 50:1 Alemite Pump
3020-0121
Trip Rod Lower Nut 50:1 Alemite Pump
3030-0131
Trip Rod Upper Nut 50:1 Alemite Pump
3020-0133
PART NO.
DESCRIPTION
7400-0100
Remote "Annular" Sticker
7400-0200
Remote "Flo Line" Sticker
7400-0500
Remote "Open/Close" Sticker
7400-0750
Remote "Shear Ram" Sticker
7400-1100
Remote "Pipe Ram" Sticker
7400-2100
Remote "Blind Ram" Sticker
7400-3100
Remote "Choke Line" Sticker
7400-4100
Remote "Kill Line" Sticker
7410-0300
"Annular" Name Plate
Trip Rod – 50:1 Alemite Pump
7410-0500
"Blind Ram" Name Plate
3020-0199
50:1 Alemite Air Motor Repair Kit
7410-0700
"Pipe Ram" Name Plate
3021-0199
60:1 Alemite Air Motor Repair Kit
7410-0800
"By-Pass" Name Plate
3030-0199
50:1 Fluid End Repair Kit
7500-5000
Kill Switch
3031-0199
60:1 Alemite Fluid End Repair Kit
7600-5000
D/C Solenoid
3032-0199
60:1 SpeedFlo Fluid End Repair Kit
3033-0199
Super 60:1 SpeedFlo Fluid End Repair Kit
4012-3100
0-3m Gauge – 3-1/2” Face (1/4” LBM)
4013-3100
0-6M Gauge – 3-1/2” Face (1/4” LBM)
4032-3100
0-3M Gauge – 6” Face (1/4” LBM)
4033-3100
0-6M Gauge – 6” Face (1/4” LBM)
4034-3100
0-10M Gauge – 6” Face (1/4” LBM)
4060-1100
0-3M Gauge – 4-1/2” Face (1/4” LBM)
4060-2100
0-6M Gauge – 4-1/2” Face (1/4” LBM)
4060-3100
0-10M Gauge – 4-1/2” Face (1/4” LBM)
TOWNSEND also stocks 15 Gallon replacement Bladders to fit Valvcon Accumulators.
PART NO. 106256-03
DESCRIPTION 15 Gallon Valvcon Bladder
KOOMEY, STEWART & STEVENSON, SHAFFER, and VALVCON are registered trademarks.
Revision: March 2010
63
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND RUBBER COATED RING GASKETS TOWNSEND Rubber Coated Ring Gaskets are standard API Ring Gaskets molded with a BUNA-N rubber coating to produce a test style gasket that can be used numerous times where a standard gasket can be used only once. TOWNSEND’s Rubber Coated Ring Gasket can be used where damaged flanges have a sealing problem, if the damage is minor. TOWNSEND’s Rubber Coated Ring Gaskets are available in "R", "RX", and "BX" series. TOWNSEND also has R-45 solid Urethane test gaskets.
RUBBER COATED RING GASKETS PART NO.
GASKET SIZE
FLANGE FLANGE/PSI
O.D.
THICKNESS
180-240
R-24 RING GASKET
2” x 3M/5M
8-1/2
1-13/16
180-270
R-27 RING GASKET
2-1/2” x 3M/5M
9-5/8
1-15/16
180-310
R-31 RING GASKET
3” x 2M/3M
9-1/2
1-13/16
180-350
R-35 RING GASKET
3” x 5M
10-1/2
2-3-16
180-370
R-37 RING GASKET
4” x 2M/3M
11-1/2
2-1/16
180-390
R-39 RING GASKET
4” x 5M
12-1/4
2-7/16
180-450
R-45 RING GASKET
7-1/16” x 2M/3M
15
2-1/2
180-000
R-45 URETHANE GASKET
7-1/16” x 3M
15
2-1/2
180-460
R-46 RING GASKET
7-1/16” x 5M
15-1/2
3-5/8
180-480
R-48 RING GASKET
MUD PUMP
——–
——–
180-490
R-49 RING GASKET
9” x 2M/3M
18-1/2
2-13/16
180-500
R-50 RING GASKET
9” x 5M
19
4-1/16
180-530
R-53 RING GASKET
11” x 2M/3M
21-1/2
3-1/16
180-540
R-54 RING GASKET
11” x 5M
23
4-11/16
180-570
R-57 RING GASKET
13-5/8” x 2M/3M
24
3-7/16
185-570
RX-57 RING GASKET
13-5/8” x 3M
24
3-7/16
195-151
BX-151 RING GASKET
1-13/16” x 10M
7-3/8
1-21/32
195-152
BX-152 RING GASKET
2-1/16” x 10M
7-7/8
1-47/64
195-155
BX-155 RING GASKET
4-1/16” x 10M
12-7/16
2-49/64
195-156
BX-156 RING GASKET
7-1/16” x 10M
18-7/8
4-1/16
195-158
BX-158 RING GASKET
11” X 10M
25-3/4
5-9/16
195-159
BX-159 RING GASKET
13-5/8” x 10M
30-1/4
6-5/8
195-160
BX-160 RING GASKET
13-5/8” x 5M
26-1/2
4-7/16
OTHER SIZES AVAILABLE UPON REQUEST. Revision: March 2010
64
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND RING GASKETS R, RX, & BX (CADMIUM PLATED AND STAINLESS STEEL) TOWNSEND inventories a large quantity of API soft iron Cadmium Plated Ring Gaskets that are widely used in the oil industry. TOWNSEND offers these Ring Gaskets in R, RX, and BX Series. Stainless Steel Ring Gaskets are also available for use with H2S gas. Each Ring Gasket meets API Standards, and is adaptable to any API Flange. Rubber Coated Ring Gaskets, which are widely used for testing, are also available.
R STYLE RING GASKETS
R STYLE RING GASKETS
PART NO.
SIZE RING
FLANGE/PSI
280-200
R-20
1-1/2” x 2/5M
280-230
R-23
2” x 2M
280-240
R-24
2” x 3/5M
280-260
R-26
280-270
PART NO.
SIZE RING
FLANGE/PSI
280-500
R-50
9” X 5M
280-530
R-53
11” x 2/3M
2-1/2” x 2M
280-534
R-53/54
11” x 3/5M
R-27
2-1/2” x 3/5M
280-540
R-54
11” x 5M
280-310
R-31
3” x 2/3M
280-570
R-57
13-5/8” x 2/3M
280-350
R-35
3” x 5M 280-650
R-65
16” x 2M
280-370
R-37
4” x 2/3M
280-390
R-39
4” x 5M
280-656
R-65/66
16” x 2/3M
280-410
R-41
5” x 2/3M
280-660
R-66
16” x 3M
280-440
R-44
5” x 5M
280-690
R-69
18” x 2M
280-450
R-45
7-1/16" x 2/3M
280-730
R-73
20” X 2M
280-456
R-45/46
7-1/16” x 3/5M 280-734
R-73/74
20” x 2/3M
280-460
R-46
7-1/16” X 5M
280-490
R-49
9” x 2/3M
280-740
R-74
20” x 3M
280-495
R-49/50
9” x 3/5M
280-910
R-91
11” x 10M
Revision: March 2010
65
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND RING GASKETS R, RX, & BX (CADMIUM PLATED AND STAINLESS STEEL)
RX STYLE RING GASKETS
RX STYLE RING GASKETS RING SIZE
FLANGE/PSI
REGULAR STEEL PART NO.
316 STAINLESS PART NO.
RING SIZE
FLANGE/PSI
REGULAR STEEL PART NO.
316 STAINLESS PART NO.
RX-20
1-1/2” x 2/5M
285-200
287-200
RX-46
7-1/16” x 5M
285-460
287-460
RX-24
2” x 3/5M
285-240
287-240
RX-49
9” x 2/3M
285-490
287-490
RX-27
2-1/2” x 3/5M
285-270
287-270
RX-50
8” x 5M
285-500
287-500
RX-31
3” x 2/3M
285-310
287-310
RX-53
11” X 2/3M
285-530
287-530
RX-35
3” x 5M
285-350
287-350
RX-54
11” x 5M
285-540
287-540
RX-37
4” x 2/3M
285-370
287-370
RX-57
13-5/8 x 2/3M
285-570
287-570
RX-39
4” x 5M
285-390
287-390
RX-65
16” x 2M
285-650
287-650
RX-41
5” x 2/3M
285-410
287-410
RX-66
16” x 3M
285-660
287-660
RX-44
5” x 5M
285-440
287-440
RX-73
20” x 2M
285-730
287-730
RX-45
7-1/16” x 2/3M
285-450
287-450
RX-74
20” x 3M
285-740
287-740
RX-45/46
7-1/16” x 3/5M
285-456
287-456 OVAL
BX STYLE RING GASKETS RING SIZE
FLANGE/PSI
REGULAR STEEL PART NO.
316 STAINLESS PART NO.
BX-150
1-11/16” x 10/15M
295-150
297-150
BX-151
1-13/16” x 10M
295-151
297-151
BX-152
2-1/16” x 10M
295-152
297-152
BX-153
2-9/16” X 10/15/20M
295-153
297-153
BX-154
3-1/16” x 10M
295-154
297-154
BX-155
4-1/16” x 10M
295-155
297-155
BX-156
7-1/16” x 10M
295-156
297-156
BX-157
9” X 10M
295-157
297-157
BX-158
11” x 10M
295-158
297-158
BX-159
13-5/8” x 10M
295-159
297-159
BX-160
13-5/8” x 5M
295-160
297-160
BX-161
16-3/4” X 5M
295-161
297-161
BX-162
16-3/4” x 10M
295-162
297-162
BX-165
21-1/4” X 5M
295-165
297-165
BX-166
21-1/4” x 10M
295-166
297-166
Revision: March 2010
66
OCTAGONAL
RX
BX
COMBINATION
BX and RX Ring Gaskets are for extreme pressure service. Pressure actuates these Gaskets, the higher the pressure, the tighter the seal. Combination Gaskets are designed for Ring Joints in which the mating Flanges have different ring grooves.
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND BOLTS AND NUTS FOR STANDARD API FLANGES & DOUBLE STUD ADAPTERS
TOWNSEND inventories a large selection of API Flange Bolts and Nuts for the drilling industry. TOWNSEND has selected a few standard sizes to list for convenience. TOWNSEND also offers Double End Studs upon request. All Studs and Bolts are B-7 API standard and Nuts are Grade 2H Hex Nuts. Contact a TOWNSEND representative about special order Studs, such as Cadmium Plated.
TAP END STUDS ALL THREAD BOLTS
PART NO.
QTY REQ’D
DESCRIPTION
FLANGE
PART NO.
QTY REQ’D
DESCRIPTION
FLANGE
300-716
8
7/8” x 4-1/4”
2” x 5M
300-715
8
3/4” x 5-1/2”
2-1/16” x 10M
300-315
N/A
1" x 4-1/4"
N/A - BOP
300-717
8
7/8” x 6-1/2”
2” x 5M
300-317
N/A
1" X 4-3/4"
N/A - BOP
300-730
8
1-1/8” x 7-5/8”
3” x 5M
300-321
12
1” x 5”
7-1/16” x 2M
300-736
12
1-1/8” x 8-1/2”
7-1/16” x 3M
300-330
12
1-1/8” x 5-5/8”
7-1/16” x 3M
300-746
8
1-1/4” x 8-3/4”
4” x 5M
300-760
8
1-1/4” x 6”
4” x 5M
300-756
16
1-3/8” x 10-3/4”
11” x 3M
300-770
12
1-3/8” x 7”
7-1/16” x 5M
300-756
20
1-3/8” x 10-3/4”
13-5/8” x 3M
300-765
12
1-3/8" X 6-3/8"
9" X 3M
300-772
16
1-5/8” x 13-1/4”
13-5/8” x 5M
300-782
12
1-5/8" X 8-1/4"
9" X 5M
300-783
12
1-7/8” x 14-1/2”
11” x 5M
300-766
16
1-3/8” x 6-5/8”
11” x 3M
300-798
16
1-3/4” x 15-5/8”
11” x 10M
300-793
12
1-7/8” x 9-3/8”
11” x 5M
300-773
24
1-5/8” x 12-1/2”
20” x 2M
300-786
20
1-3/8” x 7”
13-5/8” x 3M
300-782
16
1-5/8” x 8-1/4”
13-5/8” x 5M
ALL THREAD BOLTS PART NO.
QTY REQ’D
DESCRIPTION
FLANGE
300-735
8
1” x 7-1/8”
3-1/16” x 10M
300-736
8
1-1/8” x 8-1/2”
4-1/16” x 10M
300-775
12
1-1/2” x 11-3/4”
7-1/16” x 10M
20
300-787
1-7/8” x 17-7/8”
PART NO.
DESCRIPTION
300-700
3/4”
300-701
7/8”
300-702
1”
300-703
1-1/8”
300-704
1-1/4”
Revision: March 2010
13-5/8” x 10M
PART NO.
DESCRIPTION
300-705
1-3/8”
300-706
1-1/2”
300-707
1-5/8”
300-708
1-3/4”
300-709
1-7/8”
16
1-3/4” x 9-5/8”
11” x 10M
24
1-5/8” x 8-1/4”
20” x 2M
TAP END STUDS
G-2H HEX NUTS
G-2H HEX NUTS
300-790 300-782
PART NO.
QTY REQ’D
DESCRIPTION
FLANGE
300-714
8
3/4” x 3-1/2”
2-1/16” x 10M
300-720
8
1” x 4-3/4”
3-1/16” x 10M
300-729
8
1-1/8” x 5-3/8”
4-1/16” x 10M
300-769
12
1-1/2” x 7-3/8”
7-1/16” x 10M
300-735
20
1-7/8” x 10-7/8”
13-5/8” x 10M
6” x 3M to 6” x 5M COMBINATION STUD
67
PART NO.
QTY REQ’D
DESCRIPTION
300-796
12
1-1/8” x 1-3/8” x 7-1/4” Combination
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND ACCESSORIES
TOWNSEND OFFERS A LARGE RANGE OF API APPROVED ACCESSORIES FOR BOP’S AVAILABLE IN BOTH STANDARD AND H2S SERVICE. RING GASKETS ARE AVAILABLE IN STANDARD (CADMIUM PLATED), 304 OR 316 STAINLESS STEEL.
CROSSES
TEES
SPACER SPOOLS & ADAPTER SPOOLS
DOUBLE STUDDED ADAPTERS
COMPANION FLANGES API RING GASKETS
BLIND FLANGES
Revision: March 2010
API STUDS & NUTS
68
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE 81 RAM TYPE BOP HYDRAULIC & MANUAL DIMENSIONS & SPECIFICATION DATA
DIMENSIONS SIZE OVERALL HEIGHT STUDDED (LESS STUDS)
STYLE
7-1/16 X 3M
7-1/16 X 5M
9 X 3M
9 X 5M
SINGLE
13"
13-1/4"
13-1/4"
13-1/4"
DOUBLE
20-1/2"
20-1/2'
22-1/2'
22-1/2'
TRIPLE
30"
31"
31"
31"
SINGLE
21-3/8"
26-1/2"
28-1/2"
28-1/2"
DOUBLE
30-3/8"
36-3/4"
37-3/4"
37-3/4"
TRIPLE
38-3/8"
45-1/4"
46-3/4"
46-3/4"
OVERALL LENGTH
63"
65"
70"
70"
OVERALL WIDTH
22"
25"
25"
25"
7-1/16"
7-1/16"
9"
9"
WORKING PRESSURE (LBS.)
3,000
5,000
3,000
5,000
TEST PRESSURE (LBS.)
3,000
5,000
3,000
5,000
7-1/16 X 3M
7-1/16 X 5M
9 X 3M
9 X 5M
MAXIMUM OPERATING PRESSURE
1,500
1,500
1,500
1,500
RECOMMENDED OPERATING PSI
1,500
1,500
1,500
1,500
RATIO TO CLOSE
4.1:1
4.5:1
4.5:1
4.5:1
VOLUME OF FLUID TO OPEN
.55
.60
.62
.62
VOLUME OF FLUID TO CLOSE
.68
.73
.75
.75
4-1/18"
4-1/14"
5-1/8"
5-1/8"
OVERALL HEIGHT FLANGED
OPENING THROUGH PREVENTER
BOP CAPACITIES SIZE
PISTON STROKE
WEIGHTS SIZE
7-1/16 X 3M
7-1/16 X 5M
9 X 3M
9 X 5M
STUDDED
1,250
1,600
1,550
1,650
FLANGED
1,520
1,800
1,810
1,910
STUDDED
2,100
2,800
2,750
2,850
FLANGED
2,370
3,000
3,010
3,110
STUDDED
2,750
3,600
3,550
3,660
FLANGED
3,145
3,800
3,810
3,910
SINGLE
DOUBLE
TRIPLE
Revision: March 2010
69
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE 82 RAM TYPE BOP DIMENSIONS & SPECIFICATION DATA
DIMENSIONS SIZE
STYLE
7-1/16 X 5M
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
OVERALL HEIGHT STUDDED (LESS STUDS)
SINGLE
15"
14-1/2"
17"
19-1/2"
25-5/8"
DOUBLE
26-3/4"
29-3/8"
33"
34-1/2"
36"
SINGLE
28-1/14"
27-1/8"
34-1/2"
30-5/8"
33-5/8"
DOUBLE
40"
42"
50-1/2"
48"
49-5/8"
58"
72-1/4"
89-1/4"
92-3/4"
92-3/4"
OVERALL WIDTH
21-1/2"
25-7/8"
28-3/4"
30-7/8"
32-5/8"
OPENING THROUGH PREVENTER
OVERALL HEIGHT FLANGED OVERALL LENGTH
7-1/16"
11"
11''
13-5/8"
13-5/8"
WORKING PRESSURE (LBS.)
5,000
3,000
5,000
3,000
5,000
TEST PRESSURE (LBS.)
5,000
3,000
5,000
3,000
5,000
BOP CAPACITIES SIZE
7-1/16 X 5M
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
MAXIMUM OPERATING PRESSURE (TO OPEN & CLOSE) (PSI)
1,500
1,500
1,500
1,500
1,500
RECOMMENDED OPERATING PSI (TO OPEN & CLOSE) (PSI)
1,500
1,500
1,500
1,500
1,500
RATIO TO CLOSE
4.5:1
4.4:5
5.57
8:16
8:16
VOLUME OF FLUID TO OPEN (U.S. GALLONS)
1.18
1.45
2.62
5.30
5.30
VOLUME OF FLUID TO CLOSE
1.45
1.74
2.98
4.35
4.35
PISTON STROKE (TO OPEN & CLOSE) (INCHES)
4-1/18"
6-1/18"
6-1/18"
7-1/4"
7-1/4"
WEIGHTS SIZE SINGLE
DOUBLE
Revision: March 2010
7-1/16 X 5M
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
STUDDED
1,513
2,400
5,600
4,300
5,500
FLANGED
1,713
2,700
6,600
5,000
6,250
STUDDED
2,632
4,500
7,650
7,500
9,500
FLANGED
2,966
4,800
8,600
8,200
11,050
70
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE 88 RAM TYPE BOP DIMENSIONS & SPECIFICATION DATA
DIMENSIONS SIZE
STYLE
9 X 3M
OVERALL HEIGHT STUDDED (LESS STUDS)
SINGLE
11-1/8"
DOUBLE
22"
SINGLE
21-1/2"
DOUBLE
32-1/4"
OVERALL HEIGHT FLANGED OVERALL LENGTH
60"
OVERALL WIDTH
21-1/2"
OPENING THROUGH PREVENTER
9"
WORKING PRESSURE (LBS.)
3,000
TEST PRESSURE (LBS.)
3,000
BOP CAPACITIES SIZE
9 X 3M
MAXIMUM OPERATING PRESSURE
1,500
RECOMMENDED OPERATING PSI
1,500
RATIO TO CLOSE
4.5:1
VOLUME OF FLUID TO OPEN
.68
VOLUME OF FLUID TO CLOSE
.77
PISTON STROKE
5-1/8"
WEIGHTS SIZE
9 X 3M STUDDED
1,170
FLANGED
1,430
STUDDED
2,200
FLANGED
2,460
SINGLE
DOUBLE
Revision: March 2010
71
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE 99 RAM TYPE BOP HYDRAULIC DIMENSIONS & SPECIFICATION DATA
DIMENSIONS
WEIGHTS
SIZE
STYLE
7-1/16 X 5M
OVERALL HEIGHT STUDDED (LESS STUDS)
SINGLE
20.50"
OVERALL HEIGHT FLANGED
SIZE
7-1/16 X 5M STUDDED
1,400
FLANGED
1,600
STUDDED
2,600
FLANGED
2,800
SINGLE DOUBLE
33.88"
OVERALL LENGTH BONNETS CLOSED
64.50"
OVERALL LENGTH BONNETS OPEN
80.75"
OVERALL WIDTH
20.62"
OPENING THROUGH PREVENTER
7.062"
WORKING PRESSURE (LBS.)
5,000
TEST PRESSURE (LBS.)
5,000
DOUBLE
BOP CAPACITIES SIZE
7-1/16 X 5M
MAXIMUM OPERATING PRESSURE (TO OPEN & CLOSE) (PSI)
1,500
RECOMMENDED OPERATING PSI (TO OPEN & CLOSE) (PSI)
1,500
RATIO TO CLOSE
8.47:1
VOLUME OF FLUID TO OPEN (U.S. GALLONS)
.60
VOLUME OF FLUID TO CLOSE
.60
PISTON STROKE (TO OPEN & CLOSE) (INCHES)
4.062"
SHAFFER CHASOVOY is a registered trademark of it's respective company. TOWNSEND INTERNATIONAL BOP is not affiliated with this company.
Revision: March 2010
72
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
7-1/16 X 3/5/10M “ST” RAM TYPE BOP DIMENSIONS & SPECIFICATION DATA
WEIGHTS (LBS.)
DIMENSIONS SIZE OVERALL HEIGHT STUDDED (LESS STUDS)
OVERALL HEIGHT FLANGED
STYLE
7-1/16 X 3/5
SIZE
7-1/16 X 10M 7-1/16 X 15M SINGLE
SINGLE
FLANGED DOUBLE
TRIPLE SINGLE
27-5/8"
30-5/8”
31-7/8"
DOUBLE
41-7/8"
45"
45"
2,800 LBS.
STUDDED FLANGED
5,200 LBS.
WEIGHTS (LBS.)
TRIPLE OVERALL LENGTH
82-5/8"
82-5/8"
82-5/8"
OVERALL WIDTH
20-1/4"
20-1/4”
20-1/4"
OPENING THROUGH PREVENTER
7-1/16"
7-1/16”
7-1/16"
WORKING PRESSURE (LBS.)
3,000/5,000
10,000
15,000
TEST PRESSURE (LBS.)
3,000/5,000
10,000
15,000
SIZE SINGLE
7-1/16 X 10M STUDDED FLANGED
DOUBLE
3,550 LB.
STUDDED FLANGED
6,400 LB.
WEIGHTS (LBS.)
BOP CAPACITIES 7-1/16 X 3/5M
7-1/16 X 10M
7-1/16 X 15M
MAXIMUM OPERATING PRESSURE (TO OPEN & CLOSE) (PSI)
1,500
1,500
1,500
RECOMMENDED OPERATING PSI (TO OPEN & CLOSE) (PSI)
1,500
1,500
1,500
RATIO TO OPEN
2.2:1
2.2:1
2.2:1
RATIO TO CLOSE
7:1
7:1
7:1
VOLUME OF FLUID TO OPEN (U.S. GALLONS) (1 SET RAMS)
1.3
1.3
1.3
VOLUME OF FLUID TO CLOSE (U.S. GALLONS) ( 1 SET RAMS)
1.3
1.3
1.3
Revision: March 2010
STUDDED
DOUBLE
SIZE
7-1/16 X 3/5M
SIZE SINGLE
STUDDED FLANGED
DOUBLE
73
7-1/16 X 15M
3,800 LBS.
STUDDED FLANGED
6,750 LBS.
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
11" X 3/5 & 13-5/8 X 3/5M “ST” RAM TYPE BOP DIMENSIONS & SPECIFICATION DATA
WEIGHTS (LBS.)
DIMENSIONS STYLE
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
SIZE
SINGLE
DOUBLE
SINGLE
29-1/8"
34-3/8"
31-3/8"
33-7/8"
11 X 3M
5,300 LBS.
9,900 LBS.
DOUBLE
49-1/4"
54-1/2"
53-3/8"
55-7/8"
11 X 5M
5,600 LBS.
10,200 LBS.
OVERALL LENGTH
96-1/4"
96-1/4"
112-1/8"
112-1/8"
13-5/8 X 3M
7,200 LBS.
14,300 LBS.
OVERALL WIDTH
25-1/8"
25-1/8"
29-1/4"
29-1/4"
13-5/8 X 5M
7,700 LBS.
14,800 LBS.
11"
11"
13-5/8"
13-5/8"
SIZE OVERALL HEIGHT FLANGED
OPENING THROUGH PREVENTER WORKING PRESSURE (LBS.)
3000 PSI 5,000 PSI
3,000 PSI
5,000 PSI
TEST PRESSURE (LBS.)
3000 PSI 5,000 PSI
3,000 PSI
5,000 PIS
3.5 GALLONS
3.5 GALLONS
5.8 GALLONS
5.8 GALLONS
13-5/8 X 5M
MAXIMUM OPERATING PRESSURE (TO OPEN & CLOSE) (PSI)
1,500 PSI
1,500 PSI
1,500 PSI
1,500 PSI
RECOMMENDED OPERATING PSI (TO OPEN & CLOSE) (PSI)
1,500 PSI
1,500 PSI
1,500 PSI
1,500 PSI
RATIO TO OPEN
2.5 TO 1
2.5 TO 1
2.3 TO 1
2.3 TO 1
RATIO TO CLOSE
7.3 TO 1
7.3 TO 1
7.0 TO 1
7.0 TO 1
VOLUME OF FLUID TO OPEN (U.S. GALLONS) (1 SET RAMS)
3.4 GALLONS
3.4 GALLONS
5.4 GALLONS
5.4 GALLONS
VOLUME OF FLUID TO CLOSE (U.S. GALLONS) ( 1 SET RAMS)
3.5 GALLONS
3.5 GALLONS
5.8 GALLONS
5.8 GALLONS
Revision: March 2010
74
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE 81-84 ANNURAM BOP DIMENSIONS & SPECIFICATION DATA
DIMENSIONS SIZE
7-1/16 X 3M
7-1/16 X 5M
OVERALL HEIGHT LESS STUDS (STUDDED TOP)
STUDDED BOTTOM
40"
40"
OVERALL WIDTH (AT LARGEST PART)
ANNULAR BODY
33"
33"
OVERALL LENGTH
RAM BODY
63"
63"
OPENING THROUGH PREVENTER
7-1/16"
7-1/16"
HYDRAULIC CONNECTION (4)
1"
1"
WORKING PRESSURE (LBS.)
3,000
5,000
3,000
5,000
TEST PRESSURE (LBS.)
BOP CAPACITIES SIZE
7-1/16 X 3M
7-1/16 X 5M
MAXIMUM OPERATING PRESSURE (TO OPEN & CLOSE) (PSI)
1,500
1,500
RECOMMENDED OPERATING PRESSURE (TO OPEN & CLOSE) (PSI)
1,500
1,500
ANNULAR
2.24
2.24
RAM
.55
.60
ANNULAR
4.57
4.57
RAM
.68
.73
ANNULAR
N/A
N/A
4-1/8"
4-1/4"
VOLUME OF FLUID TO OPEN
VOLUME OF FLUID TO CLOSE
PISTON STROKE (INCHES) TO OPEN & CLOSE
RAM
WEIGHTS SIZE STUDDED Revision: March 2010
75
7-1/16 X 3M
7-1/16 X 5M
4,000 LBS.
4,500 LBS
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE 82-90 ANNURAM BOP DIMENSIONS & SPECIFICATION DATA
DIMENSIONS SIZE
7-1/16 X 3M
7-1/16 X 5M
OVERALL HEIGHT LESS STUDS (STUDDED TOP)
STUDDED BOTTOM
35-1/2"
35-1/2"
OVERALL WIDTH (AT LARGEST PART)
ANNULAR BODY
29"
29"
OVERALL LENGTH
RAM BODY
58"
58"
OPENING THROUGH PREVENTER
7-1/16"
7-1/16"
HYDRAULIC CONNECTION (4)
1"
1"
WORKING PRESSURE (LBS.)
3,000
5,000
3,000
5,000
TEST PRESSURE (LBS.)
BOP CAPACITIES SIZE
7-1/16 X 3M
7-1/16 X 5M
MAXIMUM OPERATING PRESSURE (TO OPEN & CLOSE) (PSI)
1,500
1,500
RECOMMENDED OPERATING PRESSURE (TO OPEN & CLOSE) (PSI)
1,500
1,500
ANNULAR
3.21
3.21
RAM
.60
.60
ANNULAR
4.57
4.57
RAM
.73
.73
ANNULAR
N/A
N/A
4-1/4"
4-1/4"
VOLUME OF FLUID TO OPEN
VOLUME OF FLUID TO CLOSE
PISTON STROKE (INCHES) TO OPEN & CLOSE
RAM
WEIGHTS SIZE STUDDED Revision: March 2010
76
7-1/16 X 3M
7-1/16 X 5M
4,675
4,675
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE 84 ANNULAR TYPE BOP DIMENSIONS & SPECIFICATION DATA
DIMENSIONS SIZE
7-1/16 X 3M
7-1/16 X 5M
9 X 3M
9 X 5M
11 X 3M
11 X 5M
13-5/8 X 3M
STUDDED
27-3/4"
30-3/4"
32-3/4"
33"
34-1/4"
39-5/8"
39-3/8"
FLANGED
32"
33-1/2"
37-3/4"
38"
39-1/4"
47-3/4"
45-1/4"
BODY ONLY
26"
26"
28"
28"
33-3/4"
37-1/2"
40-1/2"
WITH LIFT
32"
32"
34-1/2"
34-1/2"
40-3/8"
44-1/4"
47-1/2"
OPENING THROUGH PREVENTER
7-1/16"
7-1/16"
9"
9"
11"
11"
13-5/8"
WORKING PRESSURE (LBS.)
3,000
5,000
3,000
5,000
3,000
5,000
3,000
3,000
5,000
3,000
5,000
3,000
5,000
3,000
OVERALL HEIGHT LESS STUDS (STUDDED TOP)
OVERALL WIDTH
TEST PRESSURE (LBS.)
BOP CAPACITIES SIZE
7-1/16 X 3M
7-1/16 X 5M
9 X 3M
9 X 5M
11 X 3M
11 X 5M
13-5/8 X 3M
MAXIMUM OPERATING PRESSURE
1,500
1,500
1,500
1,500
1,500
1,500
1,500
RECOMMENDED OPERATING PSI
1,500
1,500
1,500
1,500
1,500
1,500
1,500
VOLUME OF FLUID TO OPEN
2.24
2.24
3.41
3.41
5.54
7.98
8.94
VOLUME OF FLUID TO CLOSE
2.85
2.85
4.33
6.84
7.43
9.81
11.36
4-1/18"
4-1/2"
5-3/4"
5-3/4"
6-1/8"
7-1/8"
7-1/8"
PISTON STROKE (INCHES)
WEIGHTS SIZE
Revision: March 2010
7-1/16 X 3M
7-1/16 X 5M
9 X 3M
9 X 5M
11 X 3M
11 X 5M
13-5/8 X 3M
STUDDED
2,500
2,500
3,420
3,500
5,300
7,800
8,528
FLANGED
2,675
2,840
3,560
3,650
5,450
8,250
8,775
77
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE 90 ANNULAR TYPE BOP DIMENSIONS & SPECIFICATION DATA
DIMENSIONS SIZE
7-1/16 X 3M
7-1/16 X 5M
9 X 3/M
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
OVERALL HEIGHT LESS STUDS (STUDDED TOP)
STUDDED
25-1/2"
25-1/2"
27-1/8""
27-1/8"
33-7/8"
34-1/2"
37-5/8"
FLANGED
29-1/4"
30-7/8"
32-1/2"
32-7/8"
41-1/2"
41"
45"
OVERALL WIDTH
BODY
29"
29"
35-1/2"
39-1/2"
44-3/4
46-1/2"
50"
OPENING THROUGH PREVENTER
7-1/16"
7-1/16"
9"
11"
11"
13-5/8"
13-5/8"
HYDRAULIC CONNECTION (2)
1"
1"
1-1/4"
1"
1-1/4"
1-1/2"
1-1/2"
WORKING PRESSURE (LBS.)
3,000
5,000
3,000
3,000
5,000
3,000
5,000
3,000
5,000
3,000
3,000
5,000
3,000
5,000
TEST PRESSURE (LBS.)
BOP CAPACITIES SIZE
7-1/16 X
7-1/16 X 5M
9 X 3M
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
MAXIMUM OPERATING PRESSURE
1,500
1,500
1,500
1,500
1,500
1,500
1,500
RECOMMENDED OPERATING PSI
1,500
1,500
1,500
1,500
1,500
1,500
1,500
VOLUME OF FLUID TO OPEN
3.43
3.43
5.03
6.78
14.59
17.41
17.41
VOLUME OF FLUID TO CLOSE
4.92
4.92
7.23
11.00
18.67
23.58
23.58
---
---
---
---
---
---
PISTON STROKE (INCHES)
---
WEIGHTS SIZE
Revision: March 2010
7-1/16 X 3M
7-1/16 X 5M
9 X 3M
11 X 3M
11 X 5M
13-5/8 X 3M
13-5/8 X 5M
STUDDED
3,075
3,075
4,675
5,675
9,275
13,100
13,100
FLANGED
3,100
3,175
4,775
5,825
9,550
13,500
13,700
78
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
OTHER PRODUCTS AVAILABLE
SHAFFER TYPE 50 & 51 ROTATING HEAD REPLACEMENT PARTS TOWNSEND offers replacement parts to fit Shaffer Type 50 and 51 Rotating Head. Products include Wear Sleeves, V Packing, Grease Seals, Lip Seals, Weld On Ears, Locking Latches, Bearings and other component parts. Shaffer Type 79 and Lynn Rotating Head replacement parts are also available.
ROTATING HEAD RUBBERS FOR SHAFFER 45, 50, 51, 79, GRANT & LYNN
TOWNSEND offers replacement Rotating Head Rubbers in a wide range of pipe sizes to fit Shaffer, Lynn and Grant Rotating Heads. Urethane Rubbers and Casing Stripper Rubbers are also available.
SHAFFER SENTINEL I RAM RUBBERS TOWNSEND offers replacement Ram Rubbers for Sentinel I type Blowout Preventers. Ram Rubbers are available in Standard pipe sizes, Dual Offset, and Offset styles. TOWNSEND offers these Ram Rubbers in a variety of pipe sizes. TOWNSEND’s Ram Rubber compound was developed specifically for this operation.
SHAFFER SENTINEL II & WSI RAM RUBBERS TOWNSEND offers 6” x 3M Sentinel II style Ram Rubbers in Standard pipe sizes and Offset pipe sizes. TOWNSEND also offers other replacement parts to fit the WSI and Sentinel style Blowout Preventers.
Revision: March 2010
79
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
SHAFFER TYPE 39 BLOWOUT PREVENTER REPLACEMENT PARTS TOWNSEND offers replacement parts for the 6”, 8” and 10” x 3M Type 39 Blowout Preventers. This line of parts includes Operating Screws, Sprockets, Brass Full Nuts, Sprocket Chain, Packing and Door Seals.
SHAFFER RAM SHAFTS & LOCKING SCREWS TOWNSEND offers a variety of replacement parts to fit all the Shaffer style Blowout Preventers. TOWNSEND offers Ram Shafts and the different style Locking Screws for Shaffer Type A, B, E, LWS, SL and LWP Blowout Preventers. Products are available in all Blowout Preventer sizes and readily available from inventory.
DOOR BOLTS FOR ALL MAJOR TYPES OF BLOWOUT PREVENTERS TOWNSEND offers replacement Door Bolts to fit all types, styles, and series Cameron, Shaffer, Hydril and WSI Blowout Preventers. All Door Bolts are manufactured using properly treated materials.
CAMERON TYPE QRC RAM RUBBERS & TOP SEALS TOWNSEND offers replacement Ram Rubbers for 6”, 10” and 12” Type QRC Blowout Preventers. Type QRC Ram Rubbers are also available in Offset and Dual Offset sizes.
CAMERON SPACE SAVER RAM RUBBERS TOWNSEND offers 6” x 3M, 8” x 3M, 10” x 3M, 12” x 3M and 14” x 5M Space Saver Ram Rubbers. All TOWNSEND Ram Rubbers are specially formulated to flow as the product was originally designed. Specific compounds are used so rubber has the longest endurance life possible under normal operations.
CAMERON TYPE D ANNULAR RUBBERS & DOUGHNUTS TOWNSEND offers Cameron Type D Annular Rubbers in 7-1/16” x 10M, 11” x 5M and 11” x 10M series. All units are sold with Doughnut and Unit as an assembly only.
Revision: March 2010
80
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
HYDRIL 20” X 2M MSP PACKING UNITS & SEAL KITS TOWNSEND offers 20” x 2M MSP Packing Units in both Synthetic and Natural. Each TOWNSEND Packing Unit is support by traceability records and material certifications. TOWNSEND also offers Seal Kits for other Hydril series and style Annulars.
HYDRIL TYPE V RAM RUBBERS & TOP SEALS TOWNSEND offers 11” x 3M, 11” x 5M, 12” x 3M and 13-5/8” x 5M Hydril Type V replacement Ram Rubbers and Top Seals. TOWNSEND offers these Ram Rubbers in Standard pipe and casing sizes. Dual Offset and Offset available upon request.
HYDRIL TYPE X RAM RUBBERS & TOP SEALS TOWNSEND offers 13-5/8” x 10M Hydril Type X replacement Ram Rubbers and Top Seals. TOWNSEND also offers replacement Door Seals and Bonnet Rebuild Kits for the Type X Preventer. All TOWNSEND Ram Rubbers are supported by traceability records and material certifications.
HYDRIL K-10 & K-20 PULSATION DAMPNER REPLACEMENT PARTS TOWNSEND offers replacement Diaphragms, Stabilizers, Plates, Screws, Gauges and Seals for K10 and K-20 Pulsation Dampners. All TOWNSEND K-10 and K-20 Diaphragms are serial numbered for traceability.
HYDRIL IP STYLE REPLACEMENT DIAPHRAGMS TOWNSEND offers IP-1, IP-2-1/2 and IP-5 Gallon replacement Bladders and other expendable parts such as the Bottom Plates and Backup Rings. TOWNSEND offers these Diaphragms in a variety of Elastomer compounds for different field applications. All Diaphragms are molded with Stainless Steel Inserts.
ACCUMULATOR BLADDERS – 10, 11 & 15 GALLON TOWNSEND offers replacement Bladders for 10 and 11 Gallon Greer Bottles and 15 Gallon Valvcon Bottles. Anti-extrusion Rings and Pull Rods are also available.
Revision: March 2010
81
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
EMSCO PD-43 & PD-55 PULSATION DAMPNERS TOWNSEND offers replacement Dampners to fit Continental Emsco 43 and 55 Pulsation Dampners. TOWNSEND's Diaphragm has the same suction cup design on the bottom of the Dampner as the OEM. TOWNSEND also offers Charging Hose Assemblies for this product line.
SHAFFER TYPE B MANUAL & DB HYDRAULIC VALVE TOWNSEND offers replacement parts for both the Manual and Hydraulic B and DB Valves. Products include Gates, Seats, Stems, Gate Guides, Packing and Seals. All Gates and metal parts are supported by material certifications and traceability records. Flo Seal Valve parts are also available.
CAMERON TYPE F & FC VALVE REPLACEMENT PARTS TOWNSEND offers a wide range of replacement parts to fit all the different series of Cameron Type F and FC Manual and Hydraulic Valves. Products consist of Gates, Gate Guides, Stems, Seats, Packing, Stem Protectors and many more.
CAMERON HCR & DV VALVE REPLACEMENT PARTS TOWNSEND offers 4” and 6” HCR Valve Gates, Packing and other expendables; and also manufactures 6” x 3/5M Cameron DV Valve Gate Rubbers, Rear Seals and Piston Rings.
CAMERON TYPE RR RESET RELIEF VALVE PARTS TOWNSEND offers replacement parts for Cameron Type RR Reset Relief Valves. Parts consist of Piston, Cushion Rings, Subs and many more. All TOWNSEND's RR Relief Valve parts are Quality inspected for accuracy.
CAMERON TYPE R CHECK VALVE REPLACEMENT PARTS TOWNSEND offers replacement parts for Cameron Type R Check Valves in Standard Trim, Super Trim and Stainless Steel Trim. TOWNSEND offers these replacement parts in 1-13/16” through 2-9/16” x 15M series. Items include Poppet, Seats, Springs, Seat Seals, Bonnet Gaskets and Packing.
Revision: March 2010
82
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
CAMERON SHEAR RELIEF VALVE REPLACEMENT PARTS TOWNSEND offers a wide range of replacement parts for 2” Cameron Shear Relief Valves. Replacement parts consist of Liner Subs, Bushings, Cushion Rubbers, Pistons, Stems, Washers and many more. TOWNSEND’s Shear Relief Valve parts are also interchangeable with Oteco style Relief Valves.
CAMERON, SHAFFER, THORNHILL CRAVER, BARTON & OCT CHOKE PARTS TOWNSEND offers a wide range of replacement parts to fit the above mentioned Chokes. Cameron H2 Choke parts, Thornhill Cravers 2” Unibolt Adjustable Choke parts, and Barton and OCT Positive and Adjustable Choke parts. Items include Stems, Indicators, Packing, Seats (Beans), Junk Rings and many more. Stems are available in Standard and Super Trim.
EDWARDS CHECK VALVE REPLACEMENT PARTS TOWNSEND offers Springs, Bonnet Gaskets, Seat Gaskets, Balls, Seats and many other items to fit 2” x 5/10M Edwards Check Valves. Parts are available individually or as kits.
LYNN CHECK VALVE REPLACEMENT PARTS TOWNSEND offers replacement parts to fit 2”, 3” and 4” Lynn Check Valves. Items include Dart, Dart Rubbers, Springs, Seats and Seat Seals. All TOWNSEND's parts are backed by traceability records and material certifications
PRODUCTION STRIPPER RUBBERS TOWNSEND offers the following styles of Stripper Rubbers; JU, A & P, Larkin SR and K, Rector SS, Gulfco, Hinderliter and Supreme. All TOWNSEND Stripper Rubbers are available in a variety of tubing sizes.
PIPE WIPERS TOWNSEND offers Single, Dual and Dual Split Pipe Wipers. Pipe Wipers are available in 9” through 19”. Single and Dual Solid Pipe Wipers have a hard rubber insert to prevent Wiper from being pulled through Master Bushing. Dual Split Pipe Wipers have a metal spring insert which allows Wiper to split and wrap around pipe when using a Solid Master Bushing.
Revision: March 2010
83
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
CAMERON TYPE S, R & C MUD VALVE REPLACEMENT PARTS TOWNSEND offers replacement rubber goods to fit Cameron type Mud Valves. TOWNSEND’s Gate Rubbers, Stem Packing, Stem Nuts and Threaded Body Subs also fit Oteco style C, 66 and 72 Mud Valves.
GRANT ROTATING HEAD REPLACEMENT PARTS TOWNSEND offers replacement parts to fit Grant style Rotating Heads. TOWNSEND offers new Rotating Head Rubbers, Inner Seals, Dust Cover Seals, Bearings and many more replacement parts. TOWNSEND also has the capability to re-rubber customers used Inner Seals, Dust Seals and even Drive Bushings. All TOWNSEND Grant Rotating Head Rubbers are available in a variety of drill pipe sizes.
REGAN TYPE K STRIPPER RUBBERS All TOWNSEND Regan Type K style Stripper Rubbers are made from high quality Elastomers. Other Regan style Blowout Preventer parts are also available.
TONG STRAPS TOWNSEND offers Tong Pull Back Straps with the Brass Inserts to prevent sparks on use with gas wells. TOWNSEND's Tong Straps are made from the highest quality rubber compounds to guarantee longevity and strength.
MUD PUMP SPLASH GUARDS TOWNSEND offers a wide range of Mud Pump Splash Guards to fit Wilson, Gardner Denver, Emsco and IDECO Mud Pumps. Some of the popular sizes are 2-3/8” Wilson, 3-1/2” Gardner Denver, 4” Emsco 1000, 4-3/8” IDECO Type 80 and 4-3/4” Emco Type 1300 Splash Guards.
SWAB CUPS TOWNSEND offers Swab Cups with either Steel Sleeves or Aluminum. TOWNSEND's Swab Cups are available in Standard and Oversize styles. TOWNSEND's Swab Cups have been specially designed to pull the maximum load while swabbing.
Revision: March 2010
84
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TYPE H OIL SAVER & DOUBLE EE ROD STRIPPERS TOWNSEND offers high quality Type H Oil Saver Rubbers and Double EE Rod Strippers. TOWNSEND also has other Oil Saver replacement parts available.
WIRE LINE ROLLER GUIDE TOWNSEND offers a Wire Line Roller Guide and replacement Rollers which are interchangeable with Oteco style Wire Line Roller Guides. The Wire Line Roller Guide will accommodate any size Wire Line and is simple to install.
ROTARY TORQUE REPLACEMENT PARTS TOWNSEND offers 2” Single Chain and 2” Double Chain Rotary Torque Wheels which are interchangeable in Martin Decker style assemblies. TOWNSEND also manufactures replacement Pistons, Cylinders, Axle Caps, Bases, Horse Heads and many other parts. FRACING BOMBS, FISHING NECKS & FRAC RINGS TOWNSEND offers Fracing Bombs to be used in a preplanned, multiple stage Fracing, perforating or acidizing job. Bombs are used between zones to be stimulated by temporarily isolating each zone. Fishing Necks are available in Brass or Steel.
KNUCKLE JOINT SWAB MANDRELS TOWNSEND offers Single and Double Joint Swab Mandrels, commonly known as Type K or KJM style. TOWNSEND's Swab Mandrels have grooved Fishing Necks and are compatible with any style standard Swab Cup. TOWNSEND’s Swab Mandrel has a unique designed Knuckle Joint.
SWIVEL ROPE SOCKETS TOWNSEND offers a Swivel Rope Socket designed to provide a strong connection between the Wire Line and Sinker Bar. TOWNSEND’s Rope Socket has a grooved Fishing Neck for ease when using an Overshot. Rope Sockets are available for 1/2”, 9/16” and 5/8” Wire Rope.
Revision: March 2010
85
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
SAF-T-SLIDE DE RR IC
Saf-T-Slide is designed for use as a quick escape device from a structure, tower or derrick in case of an emergency. Saf-T-Slide is constructed of materials such as Aluminum Wheels and Brass Braking Device to prevent sparks when in an H2S gas environment. The Saf-T-Slide Brake is spring loaded to lock any time the device is not in use. The descent from the structure is controlled by a Hand Brake which the operator controls. The Saf-T-Slide is easily maintained and operates in all types of weather.
K
GR O
UN D
TOWNSEND DERRICK CLIMBER TOWNSEND offers an adjustable weight Derrick Climber which is used as a tool to assist in climbing derrick ladders by offsetting the climbers weight with a Counter Balance. TOWNSEND’s Derrick Climber kit includes Counter Balance, Safety Chain and Hook, Block, Derrick Belt, 350’ of 5/16” Cable and all necessary component parts to install. TOWNSEND’s Derrick Climber can also be used in other industries that require long climbs up and down ladders, such as cargo holds in ships.
TOWNSEND MUD SAVER BUCKET TOWNSEND’s Mud Bucket is designed to reduce hazardous conditions caused by slippery rig floors, and also reduces the loss of drilling muds. Each TOWNSEND Mud Bucket consists of Mud Bucket, Mud Bucket End Seals (cut to specific size Drill Pipe) and a 4’ x 4” Discharge Hose. TOWNSEND’s Mud Bucket Side Seals, Side Seal Strips and Rubber End Seals are interchangeable with Oteco style Mud Buckets. Mud Buckets are constructed to open and close with ease.
TOWNSEND BALL INJECTOR GUN TOWNSEND offers a Ball Injector Gun that is used in the well service industry as a means of facturing fluid to all of a well’s perforations. TOWNSEND’s Ball Gun features a Manual Hand Crank with a Ball Counter. The Ball Gun is available with 12” to 36” Gun barrels. It is available in a variety of sizes and pressure ratings up to 10M psi, and a choice of different style bases.
Revision: March 2010
86
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
API RING JOINT FLANGE DATA (SERVICE PRESSURE RATING IN P.S.I. — OTHER DIMENSIONS IN INCHES) NOM. SIZE 1 13/16 2 2 2 2 2 1/16 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 1/16 3 1/2 4 4 4 4 4 1/16 5 7-1/16 7-1/16 7-1/16 7 1/16 9 9 9 9 11 11 11 11 11 13-5/8 13-5/8 13-5/8 13 5/8 14 16 16 20 20
SERIES SERVICE
600 900 1500 2900 400 600 900 1500 2900 600 900 1500 2900 2900 600 900 1500 2900 2900 600 900 1500 600 900 1500 600 900 1500 2900 600 900
1500 600 900 600 900
Revision: March 2010
FLANGE
PRESSURE RATING (P.S.I.)
O.D.
THICKNESS
10,000 2,000 3,000 5,000 10,000 10,000 960 2.000 3,000 5,000 10,000 2,000 3,000 5,000 10,000 10,000 10,000 2,000 3,000 5,000 10,000 10,000 10,000 2,000 3,000 5,000 10,000 2,000 3,000 5,000 10,000 2,000 3,000 5,000 10,000 10,000 2,000 3,000 5,000 10,000 5,000 2,000 3,000 2,000 3,000
7 3/8 6 1/2 8 1/2 8 1/2 7 3/4 7 7/8 7 1/2 7 1/2 9 5/8 9 5/8 8 7/8 8 1/4 9 1/2 10 1/2 10 10 5/8 11 1/2 10 3/4 11 1/2 12 1/4 12 1/2 12 7/16 14 1/4 14 15 15 1/2 18 7/8 16 1/2 18 1/2 19 21 3/4 20 21 1/2 23 20 3/4 25 3/4 22 24 26 1/2 30 1/4 29 1/2 27 27 3/4 32 33 3/4
1 21/32 15/16 1 13/16 1 13/16 2 3/8 1 47/64 1 7/16 1 7/16 1 15/16 1 15/16 2 3/4 1 9/16 4 13/16 2 3/16 3 1/16 2 19/64 3 3/8 1 13/16 2 1/16 2 7/16 3 5/8 2 49/64 4 3/16 2 3/16 2 1/2 3 5/8 4 1/16 2 1/2 2 13/16 4 1/16 4 7/8 2 13/16 3 1/16 4 11/16 5 11/16 5 9/16 2 15/16 3 7/16 4 7/16 6 5/8 5 7/8 3 5/16 3 15/16 3 7/8 4 3/4
BOLTS DIA. BOLT CIRCLE 5 1/4 5 6 1/2 6 1/2 5 3/4 6 1/4 5 7/8 5 7/8 7 1/2 7 1/2 6 5/8 6 5/8 7 1/2 8 7 1/2 8 1/2 8 1/2 8 1/2 9 1/4 9 1/2 9 1/2 10 3/16 11 11 1/2 12 1/2 12 1/2 15 7/8 13 3/4 15 1/2 15 1/2 18 3/4 17 18 1/2 19 16 3/4 22 1/4 19 1/4 21 23 1/4 26 1/2 25 23 3/4 24 1/4 28 1/2 29 1/2
87
BOLT QUANTIT Y 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 16 16 16 12 12 16 20 20 16 20 16 20 20 24 20
BOLT DIAMETER 3/4 5/8 7/8 7/8 7/8 3/4 3/4 3/4 1 1 1 3/4 7/8 1 1/8 1 1/8 1 1 1/4 7/8 1 1/8 1 1/4 1 3/8 1 1/8 1 5/8 1 1 1/8 1 3/8 1 1/2 1 1/8 1 3/8 1 5/8 1 1/2 1 1/4 1 3/8 1 7/8 2 1 3/4 1 1/4 1 3/8 1 5/8 1 7/8 2 1/4 1 1/2 1 5/8 1 5/8 2
A.P.I. RING BOLT LENGT H 5 1/4 4 3/4 6 3/8 6 3/8 7 1/4 5 1/2 5 1/4 5 1/4 6 7/8 6 7/8 8 3/8 5 1/2 6 3/8 7 5/8 9 1/4 7 1/8 10 1/4 6 3/8 7 3/8 8 5/8 11 8 1/2 12 3/4 7 3/8 8 1/2 11 1/4 11 3/4 8 1/2 9 1/2 12 1/2 13 1/2 9 1/4 10 14 3/8 17 15 5/8 9 1/2 10 3/4 13 1/8 17 7/8 18 10 3/4 12 1/2 12 1/2 15 1/4
STUD LENGT H 3 1/2 3 1/4 4 1/4 4 1/4 4 5/8 3 1/2 3 3/4 3 3/4 4 3/4 4 3/4 5 1/4 3 3/4 4 3/8 5 3/8 6 4 3/4 6 3/8 4 1/4 5 1/8 5 7/8 7 5 3/8 8 1/4 5 5 5/8 7 1/4 7 3/8 5 5/8 6 3/8 8 1/4 8 1/4 5 7/8 6 5/8 9 3/8 10 1/4 9 5/8 6 1/4 7 8 1/4 10 7/8 11 3/4 7 1/8 8 1/4 8 1/4 10
PITCH DIA.
RING NO.
3 1/16 3 1/4 3 3/4 3 3/4 3 1/8
BX-151 R-23 R-24 R-24 85 BX-152 26 26 27 27 86 31 31 35 87 BX-154 89 37 37 39 88 BX-155 90 45 45 46 BX-156 49 49 50 BX-157 53 53 54 91 BX-158 57 57 BX-160 BX-159 63 65 66 73 74
4 4 4 1/4 4 1/4 3 9/16 4 7/8 4 7/8 5 3/8 3 15/16 4 1/2 5 7/8 5 7/8 6 3/8 4 7/8 6 1/8 8 5/16 8 5/16 8 5/16 10 5/8 10 5/8 10 5/8 12 3/4 12 3/4 12 3/4 10 1/4 15 15
16 1/2 18 1/2 18 1/2 23 23
TOWNSEND
Raising Performance. Together TM www.c-a-m.com 432-381-8750
TOWNSEND TYPE 90 ANNULAR SHAFFER ANNULAR
TOWNSEND TYPE 82-90 ANNURAM BOP SHAFFER ANNULAR/ SHAFFER LWS RAM BOP
TOWNSEND TYPE 81-84 ANNURAM HYDRIL GK ANNULAR/ SHAFFER SENTINEL RAM BOP TOWNSEND TYPE 88-84 ANNURAM BOP HYDRIL GK ANNULAR/ SHAFFER LWP RAM BOP
TOWNSEND TYPE 81 MANUAL SHAFFER SENTINEL II WSI DUKE
TOWNSEND TYPE 84 ANNULAR HYDRIL GK ANNULAR
TOWNSEND TYPE 99 RAM BOP SHAFFER CHASAVOY (HYDRAULIC ONLY) TOWNSEND TYPE 82 RAM BOP SHAFFER TYPE LWS TOWNSEND "ST" RAM BOP CAMERON TYPE U
TOWNSEND TYPE 81 HYDRAULIC BOP SHAFFER SENTINEL II WSI DUKE Revision: March 2010
TOWNSEND TYPE 88 RAM BOP SHAFFER LWP RAM BOP 88
TOWNSEND
