TLE_IA_ Automotive Servicing Grades 11-12

K to12 B ASIC EDUCATION CURRICULUM SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK INDUSTRIAL ARTS AUTOMOTIVE SERVICING GRADE 11 (Specialization) 11 (Specialization) –

Course Description:

This is a competency-based competency-based course leading to a TESDA Qualification Standard for National Certificate Level I (NC I) in Automotiv in Automotive e Servicing. Servicing. It covers one core competency that the Grade 11 student 11 student should acquire —namely, that of performing a gas engine tune-up of a vehicle. The preliminaries of this course include the following: (1) discussion on the relevance of the course, (2) explanation of key concepts relative to the course, and (3) exploration of career opportunities. CONTENT

Introduction 1. Relevance of the course 2. Core concepts in Automotive Servicing Servicing 3. Employment opportunities 4. Business opportunities 5. Further studies

CONTENT STANDARD

The learner demonstrates an understanding of the basic concepts and underlying theories in automotive servicing.

PERFORMANCE STANDARD

The learner i ndependently performs engine and body electrical services as prescribed by TESDA Training Regulations.

LEARNING COMPETENCIES

CODE

1. Explain basic concepts in automotive servicing 2. Discuss relevance of the course 3. Explore opportunities for employment, business, or further studies

Perform Gas Engine Tune Up (34) (GT)

1. Procedure in setting valve tappet clearance 2. Procedure in checking and adjusting valve tappet clearance 3. Safety procedure

The learner demonstrates an understanding of gas engine tune up.

The learner i ndependently performs a gas engine tune-up.

K to 12 TVL Track Industrial Arts – Automotive Automotive Servicing Curriculum Guide December 2013

LO1. MEASURE/ADJUST VALVE TAPPET CLEARANCE 1.1 Valve tappet clearance clearance is set 1.2 Checking and adjustment adjustment is performed

*LO – Learning Outcome

TLE_IAAS11GT-Ia-h1

Page 1 of 8

Trusted by over 1 million members

Try Scribd FREE for 30 days to access over 125 million titles without ads or interruptions! Start Free Trial Cancel Anytime.





K to12 B ASIC EDUCATION CURRICULUM SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK INDUSTRIAL ARTS AUTOMOTIVE SERVICING –

CONTENT

4. Procedure in adjusting spark plug cl earance 5. Procedure in testing spark plug 6. Analyzing spark plug plug spark 7. Safety procedure 8. Timing result/reference result/reference table

9. Procedure in replacing fuel filter and air cleaner 10. Types of filter elements

11. Procedure in inspecting/adjusting/replaci ng contact point gap. 12. Procedure in testing and replacing condenser.

CONTENT STANDARD



CODE

LO2. TEST SPARK PLUG 2.1 Spark plug clearance clearance is adjusted adjusted 2.2 Spark plug is tested 2.3 Spark plug test result result is analyzed analyzed and appropriate recommendations are prescribed

TLE_IAAS11GT-IiIId-2

LO3. CHECK/REPLACE FUEL AND AIR FILTER 3.1 Fuel filter and air air cleaner are replaced replaced 3.2 Fuel filter is free of sediments sediments and impurities.

TLE_IAAS11GT-IIe j-3

LO4. TEST AND REPLACE IGNITION BREAKER 4.1 Contact point gap gap is inspected, adjusted or replaced 4.2 Condenser is tested and replaced replaced

TLE_IAAS11GT-IIIaf-4






CONTENT

17. Procedure in adjusting idle engine speed. 18. Adjusting 18. Adjusting idle fuel mixture. mixture.

19. Procedure in compression testing. 20. Safety precaution. 21. Compression specification.

CONTENT STANDARD



CODE

LO6. SET FUEL MIXTURE AND IDLE RPM 6.1 Air-fuel mixture is adjusted. adjusted. 6.2 Engine speed in revolutions per minute minute (RPM) is checked.

TLE_IAAS11GT-IVae-6

LO7. PERFORM COMPRESSION TESTING 7.1 Compression Compression test test is conducted conducted 7.2 Test is conducted without damage damage or injury to person or property 7.3 Compression Compression test result is interpreted interpreted and appropriate recommendation is prescribed

TLE_IAAS11GT-IVf j-7





K to12 B ASIC EDUCATION CURRICULUM SENIOR HIGH SCHOOL TECHNICAL-VOCATIONAL-LIVELIHOOD TRACK INDUSTRIAL ARTS AUTOMOTIVE SERVICING GRADE 12 (Specialization) –

Course Description:

This is a competency-based competency-based course leading to a TESDA Qualification Standard for National Certificate Level I (NC I) in Automotiv in Automotive e Servicing. Servicing. It covers the core competency that the Grade 12 student 12 student should acquire —namely, that of performing a gas engine tune-up of a vehicle. The preliminaries of this course include the following: (1) discussion on the relevance of the course, (2) explanation of key concepts relative to the course, and (3) exploration of career opportunities.

CONTENT

Introduction 1. Relevance of the course 2. Core concepts in Automotive Servicing 3. Employment opportunities 4. Business opportunities 5. Further studies

CONTENT STANDARD

The learner demonstrates an understanding of the basic concepts and underlying theories in automotive servicing.


The learner independently performs engine and body electrical services as prescribed by TESDA Training Regulations.

LEARNING COMPETENCIES 1. Explain basic concepts in automotive servicing 2. Discuss relevance of the course 3. Explore opportunities for employment, business, or further studies

CODE






CONTENT 4. 5.

6. 7. 8.

Positive work values Type and classification of gasket and sealant

Procedure in injection timing. Timing marks interpretation and application. Use of SST

11.

Positive work values. Fuel injection marks Timing result/reference table

12.

Procedure in bleeding injection

9. 10.

CONTENT STANDARD



CODE

checked before installation 1.3 Mounting bolts are are tightened tightened following torque as stated in the manual of specification. 1.4 No error is is found in detecting and and reading injection timing

LO2. INSPECT INJECTION TIMING 2.1 Injection pump timing device is used without error. 2.2 Injection pump timing result is interpreted correctly. 2.3 Advance timing operation is checked.

TLE_IAAS12DT-IaIIj-2

LO3. BLEED INJECTION SYSTEM

TLE_IAAS12DT-IIIa-






CONTENT 17. 18. 19. 20.

testing. Use of compression testing instruments Use of special service tools Positive work values Effects of l ow compression

CONTENT STANDARD


LEARNING COMPETENCIES TESTING 4.1. Engine requirements in compression testing are set and prepared. 4.2. Specific compression test result is read and interpreted. 4.3. Corresponding recommendation/prescription recommendation/prescription i s given based on test result.

CODE j-4








GLOSSARY






Code Book Legend Sample: TLE_IAAS11GT-Ia-h-1

LEGEND

DOMAIN/ COMPONENT

SAMPLE Learning Area and

Technology and Livelihood Education_Industrial Education_Industrial Arts

Perform Gas Engine Tune Up Perform

CODE GT

TLE_IA_ Automotive Servicing Grades 11-12

Recommend Documents