CONTENTS
1. PROJECT WORK EVALUATION 2. CRETIFICATE 3. SEIF-CRETIFICATE 4. ACKNOWLEDGEMENT 5. DECLARATION 6. SCOPE OF PROJECT 7. USER REQUIREMENT 8. THEORY ABOUT DATA CENTERED ARCHITECTURE 9. OBJECT ORIENTED DATA CENTERED APPROACH 10. PRODUCT PRESPECTIVE 11. SYSTEM REQUIREMENT 12. DATA FLOW DIAGRAM 13. HISTORY/INTRODUCTION OF C++ 14. COADING 15. OUTPUT 16. LIMITATION 17. CONCLUSION 18. BIBLIOGRAPHY
GURU GHASIDAS UNIVERSITY, BILASPUR, CHHATTISGARH
PROJECT WORK EVALUATION
1. Candidate
---------------------------------------
2. Project Title
Student Report Card System
3. Software Base
Progamming in C++
4. Study Center Code, Name
---------------------------------------
& Address 5. Submitted fro Course & Year
BCA 2010-2011
6. Group Evalution
(Project Reports & CD Evaluation marks)
Particulars
Marks out of
7. Forwarding by HOD
Mark Awarded Internal Examiners Name & Signature
------------------------------
(Signature, Name, Study Center Seal)
8. Remarks of Study Center
-------------------------------
9. Remark of University Examiner
-------------------------------
CRETIFICATE
This is to certify that the project report work “STUDENT REPORT CARD SYSTEM” for Jai Ambe Nursing Home, Bilaspur (CG) is done by Radhika Shukla, Shraddha Sarna and Nikita Kumar in Partial fulfillment of “Bachelor of Computer Application” Examination under the Guru Ghasidas University, Bilsapur, CG.
This project report or similar report on the topic has not been submitted for any other examination and does not form part of any other course undergone by the student.
Date:
Guide
--------------------
------------------------------------
SEIF-CRETIFICATE
This is to certify that the project report work “STUDENT REPORT CARD SYSTEM” for Jai Ambe Nursing Home, Bilaspur (CG) is done by us is an
authentic work carried out for the partial fulfillment of the requirement of the award of the Bachelor of Computer Application under the guidance of Mr. Vishwash Victor the matter embodied in this project work has not been submitted earlier for award of any degree/diploma to the best of my knowledge and belief.
Signature of the Student
--------------------------------------
ACKNOWLEDGEMENT
I owe a great many thanks to a great many people who helped and supported me during the writing of this book. My deepest thanks to Lecturer, -----------------, HOD the Guide of the project for guiding and correcting various documents of mine with attention and care. He has taken pain to go through the project and make necessary correction as and when needed. I express my thanks to the Principal of-------------------University, Bilaspur, (CG), for extending his support. Jai Ambe Nursing Home, Bilaspur, (CG), support and guidance. Thanks and appreciation to the helpful people at Jai Ambe Nursing Home for their support. I would also thank my Institution and my faculty members without whom this project would have been a distant reality. I also extend my heartfelt thanks to my family and well wishers.
Name: ---------------------------
Signature
Declaration
I hereby declare that the project report entitled “Student Report Card System” submitted in partial fulfillments of the BCA is the record of my original work under the guidance of Prof. Ramesh Pratap Singh Parihar, HOD, Department of Computer Science, D.P. Vipra PG Colllege, Bilaspur, (CG)
Name:
Signature
Radhika Shukla
-------------------
Sharaddha Sarna
Nikita Kumar
---------------------
---------------------
This project report or similar report on the topic has not been submitted for any other examination and does not form part of any other course undergone by the student.
(Signature of Internal Guide)
Date:
Guide
---------------------
Scope of Project 1.1 IMPROVED SERVICES An objective of the proposed system is to improve the existing system's services, in order to: Increase employer and employee satisfaction Provide the quality Create a controlled information management environment 1.2 BETTER PERFORMANCE It is an objective of our proposed system to provide better performance which is managed by providing Desired flexibility Fast response Ability to support changes. Ability to maintain the quality of services. 1.3 EFFICIENT GUI One of the objectives of the proposed system is to provide a user friendly GUI, that will enable the user to work on clicks and make the information transfer possible with the most common I/O devices. 1.4 MORE INFORMATION An objective of our proposed system is to develop a system that will eliminate the problem of insufficient and incomplete information. 1.5 DECISION SUPPORT
By providing the facility of what-if analysis, we will make a decision support system. 1.6 STRONGER CONTROLS The proposed system will have stronger controls. Controls like passwords, various levels of user access and option will be added. 1.7 ELIMINATION OF RUNNING COST We are going to develop the proposed system with an objective to eliminate the running cost by overcoming the continuous stationery expenses, manual storage need, and extra staff in the information resource department of the Organization .
User Requirement In the above proposed system single category of authenticated users are there that is the Hospital staff. After the product has been delivered the staff will be trained by our development team. We also propose to provide a help document for the pathent which will help them in using the product efficiently.
Theory about Data centered architecture:
A Data store resides at the center of this architecture and is accessed frequently by other components that modify info, checks availability of room, allocate room, bill function, create bill or otherwise get function info within the Student Report Card System. A data-centered architecture promotes integrability.
Object oriented Data centered approach The components of a system encapsulate data and the operations that must be applied to manipulate data. Communication and coordination between components is accomplished via message passing.
PRODUCT PRESPECTIVE
This project helps to define internal boundaries achieving the appropriate balance between the general and the specific, Hospital management giving a positive and efficient workflow to the staff of the Hospital, thereby helping the business model of the Hospital to expand. In principle the product exposes a simple and general interface and hides the specific and complex implementation based. In our example, we want our Hospital design to hide detail that is too complex or unnecessary, thereby reducing paperwork and increasing efficiency. Also through this project we aim to reduce operating costs and increase throughput of the staff.
SYSTEM REQUIREMENT
HARDWARE AND SOFTWARE REQUIREMENTS
The platform used is C++. Hence we decided to use Microsoft Visual Studio 2008 edition (Professional Edition).
Since BGI graphics aren’t supported in the Visual studio so for actually running the software we used Borland C++ compiler 3.0 which was recently made free by Borland Inc.
For optional coding and easy debugging we used Microsoft Visual Studio 2008 edition and made explicit .cpp files.
Henceforth for optimal usage of such a software a windows based operating system preferably Windows vista must be there. Also on the hardware part any system having Windows Vista installed will suffice.
DATA FLOW DIAGRAM
DAV PUBLIC SCHOOL
STUDENT DETAILS
Registration
Call By Data
Reports
Print
To Exit
Process
Data Store
Process
Process
Show Details
To Exit
Process
Close the program
History/Introduction of C++
Bjarne Stroustrup began work on "C with Classes" in 1979. The idea of creating a new language originated from Structure’s experience in programming for his Ph.D. thesis. Structure found that Simula had features that were very helpful for large software development, but the language was too slow for practical use, while BCPL was fast but too low-level to be suitable for large software development. When Structure started working in AT&T Bell Labs, he had the problem of analyzing the UNIX kernel with respect to distributed computing. Remembering his Ph.D. experience, Structure set out to enhance the C language with Simula-like features. C was chosen because it was general-purpose, fast, portable and widely used. Besides C and Simula, some other languages that inspired him were ALGOL 68, Ada, CLU and ML. At first, the class, derived class, strong type checking, inclining, and default argument features were added to C via Structure’s C++ to C compiler, Front. The first commercial implementation of C++ was released on October 14, 1985
Limitation
Though we have completed this project with all our effort but has certain limitation like it cannot be operated in networking. the working of project is slow in windows operating system.
CONCLUSION
This project is very useful in preparing hospital management. this project meets our requirements and complete in all sense. this software is really of great use for Hospital Management, who want their hospital Mnagement to be computerized.
BIBLIOGRAPHY
The C++ Programming Language 3e , Bjarne Stroustrup , Addison-Wesley , 1997 ISBN: 0-201-88954-4
The C++ Standard Library , Nicolai Josuttis , Addison-Wesley , 1999 ISBN: 0-201-37926-0
The C++ Standard , , John Wiley and Sons , 2003 ISBN: 0470846747
Accelerated C++ , Andrew Koenig and Barbara Moo , Addison-Wesley , 2000 ISBN: 0-201-70353-X
C++ by Example: UnderC Learning Edition , Steve Donovan , Que , 2001 ISBN: 0-7897-2676-9
Teach Yourself C++ 7e , Al Stevens , Wiley , 2003 ISBN: 0-7645-2644-8
