SlideDoc.us-actix Missing NL

 MAisctix sing NL

Chec Ch eck k Miss Missin ing g NL WC WCDM DMA A (usi (using ng Ac Acti tix x Tool Tool))

Description:   Actix Tool is been used in the Claro Project Brazil to Route Analysis. In this case, the analysis is 1 Drop due Missing NL.  Ac ti vity #1: Drop Analysis using the Actix Tool to check the covergare and EcNo on the region.   Activity #2: Using to automatic Actix Feature to identify the Missing NL.

  Activity #1:   Actix Tool: Drop occurred between 2 Node´s B (APIN11 and APIN09) Follow the step using the Tool to find the cause of drop 1. Open the section Network Optmization:

2. The tool informed the possible cause of drop: Drop Call

3. Check Coverage 850MHz on the region: - Click on the option Radio Network Analysis - Analysis: UMTS Coverage - Device Type: Handset – 4414 - After selections: press

-

Check the EcNo on the region using Footprint Attribute EcNo

Click on t he Sector   

4. Check EcNo APIN11C 850MHz

5. Check EcNo APIN09B 850MHz

6. Check RSCP APIN11C 850MHz (Before Selected Footprint : RSCP)

7. Check RSCP APIN09B 850MHz (Before Selected Footprint : RSCP)

8. Select Coverage for both site APIN11C and APIN09B 850MHz (Before Selected Footprint : SC)

- On the screen we can check the instersection between 2 faces -It was check Missing NL between those 2 faces Resolution:   Add NL APIN11C <> APIN09B (850MHz)   Add NL APIN11K <> APIN09J (2100MHz)

  Activity #2: Follow the sequence to use the automatic Actix Feature that indicate the Missing NL on the region

To view the Missing Neighbors feature follow the sequence: 1. Analysis = UMTS Missing Neighbors 2. Device Type = Scanner 4414 3. Footprint Attribute = EcNo 4. Check the botton Result: The shows a green li ne that indicate the Missing NL between two Faces