RET-KA-At 2 01 Release Notes

Maint Ma int enance delivery delivery

Release deliver Release del ivery: y: WZ9. WZ9.1 1 2.1 Produc t famil y: WCDMA WCDMA BTS Produc t: Flexi Zone WCDM WCDMA A BTS

Document name: WZ9.1 WZ9.1 2.1 2.1 Delivery Delivery Documentatio n WZ9.1 2.1 - Relea Release se Summary and Imp act WZ9.1 2.1 - Release Upgrade Instructions WZ9.1 2.1 - Change Note Forms WZ9.1 2.1 - Ve Verification rification Document

Contact Contact your local Nokia support.

Summary of changes: 25-Apr-2017

WZ9.1 2.1 SW Delivery Documentation Documentation Page 1 / 1 Version 1.0 Confidential

1.0

Approval date

© Nokia 2017

Release Summary and Impact Release Delivery: WZ9.1 2.1 Product Family: WCDMA BTS Product: Flexi Zone WCDMA BTS

Approval date: 25-Apr-2017

WZ9.1 2.1 SW Release Summary and Impact Page 1 / 5 Version 1.0 Confidential

© Nokia 2017

Table of Contents 1. 2. 3. 4.

Purpose ................ Purpose ................................. ................................. ................................. ................................. ................................. ................................. ............................. ............. 3 Summary of WZ9.1 2.1 SW .................................................................................................. 3 Correctio Corr ections ns ................ ................................. .................................. ................................. ................................. ................................. ................................. ........................ ....... 3 Release delivery effects ....................................................................................................... 3 4.1 New RAN feature introduced by WZ9.1 2.1 .................................................................... 3 5. Rel Release eased d objec objects ts ............... ................................ .................................. ................................. ................................. .................................. ................................ ............... 3 6. Restrictions in WZ9.1 2.1...................................................................................................... 4 6.1 Lack of support for NetAct SLNBI ................................................................................... 4 7. New alar alarms ms ............... ................................ .................................. ................................. ................................. ................................. ................................. ........................ ....... 4 8. New coun counters ters ............... ............................... ................................. .................................. ................................. ................................. ................................. ..................... ..... 4 9. New para parameter meters s ................ ................................. .................................. ................................. ................................. .................................. ................................ ............... 4 10. Refe Reference rences s ................ ................................. .................................. ................................. ................................. ................................. ................................. ........................ ....... 4

Contact: Contact your local Nokia support.


1.0


Approval date

© Nokia 2017

1.

PURPOSE The purpose of this document is to give a brief summary on the BTS SW W Z9.1 2.1 Maintenance Delivery corrections and new or changed functionalities.

2.

SUMMARY OF WZ9.1 2.1 SW WZ9.1 2.1 delivery contains: BTS SW build: WZ9.1_2000_416_15 BTS Site Element Manager: BTSSiteEMBTSSiteEM-WL91-1408_076_05 WL91-1408_076_05 Release documentation • • •

3.

CORRECTIONS WZ9.1 2.1 has corrections to the following problems. Pronto id

PR211382 PR217472 PR218932 NA06001438 NA05991345

4.1

[WZ9.1 2.0][LED Indications]The source of Alarm6821 is inconsistent between BTSSM and "on-line-help" [WZ9.1 2.0][LED Indications]BTS status LED display Error when major TRSW faults 61613, 61058, 61010 and 61400 occur [WZ9.1 2.0]SFP auto-negotiation fail

PR209523

NTP server is not accessible for FWGP [WZ9.1.3.0][SWBT] Critical alarm “RF Module Failure” occurred after power off/on [WZ9.1.2.0][LED]BTS status LED display Error when BTS is Uncommissioned

PR214901

SEC: tcpdump ≤ 4.8.1 - Multiple Vulnerabilities - 4.9

PR222290

4.

Pronto Title

RELEASE DELIVERY EFFECTS New Ne w RAN featur e int rod uced by WZ9 WZ9.1 .1 2.1

ID

Featur Fea tur e Name

CNI-17539

Option to use either Port-A or Port-B for the Main BH

5.

Remark

RELEASED OBJ OBJECTS ECTS

SW Delivery

WZ9.1 2.1

Delivery Date

25-Apr2017

Software Item

Software File Na Name me

Checksum Che cksum

WZ9.1 2.1 BTS SW

WZ9.1_2000_416_15.zip

5917e1a41aa7dc02b24f 739328e8334721ce866 2

BTS manager SW for Windows

BTSSiteEM-WL911408_076_05 .zip

d4bf41b6fe74317a20f95 526a0da2d8489e8c5af


© Nokia 2017

SW Delivery

Delivery Date

Software Item

Software File Name

Checksum

BTS manager SW for Linux

Linux_BTSSiteEM-WL911408_076_05.zip

9e8c525ac7eac2a16be 07230640e03159cb1d5 e9

Linux_ f85deb7cd870ebd6970a BTSSiteEM-WL91c9034dcb2aac36899e0 1408_076_05 2 _x64.zip NOTE: Checksum (SHA1) is recommended to verify when SW is downloaded from NOLS before installing it to the Network. BTS manager SW for 64-bit Linux

The following link can be used for the SW download from NOLS: https://online.networks.nokia.com/SWD/?access_key=MTI4NjMx

6.

RESTRICTIONS IN WZ9.1 2.1

6.1

Lack of suppor t for NetAct SLNBI The use NetAct SLNBI for collecting audit logs from the network element is not supporte d by the WZ9.1 2.1 SW release. This affects tracking of activities done directly on network element, like network element configuration changes, access logs in NetAct. Operations done through NetAct will still be available in SLNBI through NetAct logs. The correction to this issue is under evaluation and will be planned for the next maintenance delivery.

7.

NEW AL ARMS No new BTS faults and alarms introduced by WZ9.1 2.1 SW.

8.

NEW COUNTERS No new BTS counters introduced by WZ9.1 2.1 SW.

9.

NEW PARAMETERS New transport parameter introduced by WZ9.1 2.1 SW.

Parameter Class (MOC)

FTM

Parameter Long Name Primary Backhaul Port

Parameter Ab br evi ated Name

Parameter Struct ure Name

primBackhaulPort

FTM/primBackhaulPort

10. REFERENCES Operating documentation: WCDMA RAN, Rel. W CDMA15FZ, Operating Documentation.


© Nokia 2017

Disclaimer The information in this document applies solely to the hardware/software product (“Product”) specified herein, and only as specified herein. Reference to “Nokia” later in this document shall mean the respective company within Nokia Group of Companies with whom you have entered into the Agreement (as defined below). This document is intended for use by Nokia's customers (“You”) only, and it m ay not be used except for the purposes defined in the agreement between You and Nokia (“Agreement”) under which this document is distributed. No part of this document may be used, copied, reproduced, modified or transmitted in any form or means without t he prior written permission of Nokia. If You have not entered into an Agreement applicable to the Product, or if that Agreement has expired or has been terminated, You may not use this document in any manner and You are obliged to return it to Nokia and destroy or delete any copies thereof. The document has been p repared to be used by professional and properly trained personnel, and You assume full responsibility when using it. Nokia welcomes your comments as part of the process of continuous development and improvement of the documentation. This document and its contents are provided as a convenience to You. Any information or statements concerning the suitability, capacity, fitness for purpose or performance of the Product are given solely on an “as is” and “as available” basis in this document, and Nokia reserves the right to change any such information and statements without notice. Nokia has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors and omissions, and Nokia will correct errors that You identify in this document. Nokia's total liability for any errors in the document is strictly limited to the correction of such error(s). Nokia does not warrant that the use of the software in the Product will be uninterrupted or error-free. NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT. This document is Nokia proprietary and confidential information, which may not be distributed or disclosed to any third parties without the prior written consent of Nokia. Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective owners. Copyright © 2016 Nokia. All rights reserved.

Important Notice on Product Safety This product may present safety risks due to laser, electricity, heat, and other sources of danger. Only trained and qualified personnel may install, operate, maintain or otherwise handle this product and only after having carefully read the safety information applicable to this product. The safety information is provided in the Safety Information section in the “Legal, Safety and Environmental Information” part of this document or documentation set. Nokia is continually striving to reduce the adverse environmental effects of its products and services. We would like t o encourage you as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging and follow the recommendations for power use and proper disposal of our products and their components. If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia for any additional information.


© Nokia 2017

Release Upgrade Instructions Release Delivery: WZ9.1 2.1 Product Family: WCDMA BTS Product: Flexi Zone WCDMA BTS Approval date: 25-Apr-2017

WZ9.1 2.1 SW Release Upgrade Instructions Page 1 / 9 Version 1.0 Confidential

© Nokia 2017

Table of Contents 1 2 3 4 5 6

Purpose .................................................................................................................................................3 Overview................................................................................................................................................ 3 BTS SW upgrade paths ......................................................................................................................... 3 BTS HW compatibility............................................................................................................................ 4 RNC and NetAct SW compatibility ........................................................................................................ 4 Installing and launching BTS Site Manager .......................................................................................... 4 6.1 6.2 6.3

7

Installing BTS Site Manager ........................................................................................................................... 4 PC settings for connecting to BTS .................................................................................................................. 5 Connecting to a BTS and Authentication management .................................................................................. 5

SW Download and activation ................................................................................................................ 6 7.1

8 9 10 11

SW upgrade steps with BTS Site Manager ......................................................... ............................................ 7

Additional security enhancement .......................................................................................................... 7 WCDMA BTS license free period .......................................................................................................... 8 Operating documentation ...................................................................................................................... 8 Appendices / References ...................................................................................................................... 8

Contact Contact your local Nokia support.


1.0


Approval date

© Nokia 2017

1

PURPOSE The purpose of this document is to describe the actions needed for installing and or upgrading this Release Delivery into the customer’s network.

2

OVERVIEW WZ9.1 2.1 is compatible with WCDMA16 and WCDMA17 SW releases. Actual BTS SW upgrading procedure is described in chapter 7 SW Download and activation of this document. Before any SW upgrade actions, you should take the following steps: 1. Ensure the correctn ess of the SW package: WZ9.1 2.1 release package id is: WZ9.1_2000_416_15. 2. Ensure the correctness of BTS Site Manager SW version and check PC requirements and settings: Flexi Lite BTS Site Manager is used with WZ9.1 2.1 BTS SW. The BTS Site Manager SW version delivered with WZ9.1 SW release is BTSSiteEM-WL91-1408_076_05.

More information on the BTS Site Manager can be found in chapter 6 Installing and launching BTS Site Manager . 3. Ensure the compatibi lities: BTS SW to be installed must be compatible with the following items: BTS SW release currently in use. BTS HW. RNC and NetAct SW.

3

BTS SW UPGRADE PATHS Flexi Zone WCDMA BTSs are delivered from factory with pre-release level SW installed. Prerelease SW can be upgraded to W Z9.1 2.1 SW without any intermediate steps following the instructions in chapter 7 SW Download and activation. The following upgrade paths are tested and supported: WZ9.1 to WZ9.1 2.1 WZ9.1 0.1 to WZ9.1 2.1 WZ9.1 0.2 to WZ9.1 2.1 WZ9.1 0.2.1 to WZ9.1 2.1 WZ9.1 1.0 to WZ9.1 2.1 WZ9.1 2.0 to WZ9.1 2.1 • • • • • •

Note: The FZP FWGL/FWGM/FWGN/FWFE/FWFF/FWFG with HW version earlier than A.203 can be used with all the above SWs. The FWGL/FWGM/FWGN/FWFE/FWFF/FWFG with HW version A.203 and later can be used only with the WZ9.1 0.2.1 onwards. The FWFI and FZM can be used with WZ9.1 1.0 onwards.


© Nokia 2017

4

BTS HW COMPATIBILITY WZ9.1 2.1 SW release is compatible only with Flexi Zone W CDMA BTS. Release is not allowed to be used in any other W CDMA BTS products.

5

RNC AND NETACT SW COMPATIBILITY WZ9.1 2.1 SW release is compatible with the following RNC a nd NetAct releases: OMS – OMS16 and OMS17 RNC – RNC16 and RNC17 mcRNC – mcRNC16 and mcRNC17 NetAct – 17.2 • • • •

6 6.1

INSTALLING AND LAUNCHING BTS SITE MANAGER Inst alling BTS Site Manager Flexi Zone WCDMA BTS is managed with Flexi Lite BTS Site Manager. The BTS Site Manager covers managing of the both partitions, BTS and TRS. SW release delivery includes installation applications for BTS SW manager -

BTSSiteEM-WL91-1408_076_05.zip for Windows Linux_BTSSiteEM-WL91-1408_076_05.zip for Linux Linux_BTSSiteEM-WL91-1408_076_05_x64.zip for 64-bit Linux

1.

You should be familiar with installing software onto your PC and managing files in it. In order to set up and install the BTS Site Manager, you need to have an internet connection available to download the BTS Site Manager Installation file fromNOLS (Nokia Online Services). Path to locate the SW files in NOLS is Care – Software Supply Tool - Software Catalog – Radio Network – Base Stations – Flexi Zone WCDMA BTS – WZ9.1 SW - WZ9.1 2.1 SW Release

The installation file can also be delivered on a removable media (DVD, for example). 2.

Check that your computer meets the system requirements listed in the following table:

Table1. System HW and SW requirements for BTS Site Manager


© Nokia 2017

Item

Specification

Processor:

Minimum: 1 GHz Recommended: 2 GHz dual core

Memory:

Minimum: 1 GB Recommended: 2 GB

Hard disk space:

500 MB

Ethernet connection:

10/100/1000 Mbit/s Ethernet card Communication cable (10baseT Ethernet cable with RJ-45 connector)

Display:

1280x1024

Pointing device:

Mouse, touch pad, track ball or equivalent with 2 click buttons.

Operating System:

Microsoft Windows: Vista, 7, 8 Red Hat Enterprise Linux 5/6 ES GNOME desktop (glibc-2.12-1.107 or newer) Windows Server 2003 / 2008

3.

6.2

In Windows: Double-click the file to start the installation and follow the instructions in the BTS Site Manager installer. BTS Site Manager Installation wizard will guide you through the installation of BTS Site Manager.

PC settings for connecting to BTS IP Settings for PC network card (straight Ethernet cable is needed to connect to the LMP port): - PC IP address 192.168.255.130 - Subnet mask 255.255.0.0 (with /16 mask,) - Gateway is not defined The local software update procedure requires that client PC firewall allows traffic on ports from 13062 to 13092. Check that these TCP ports are allowed both for inbound and outbound traffic. IP settings can be tested test by pinging to IP addresses of FTM, 192.168.255.129.

6.3

Connecting to a BTS and Authentication management Authentication is always enabled either with the default username/password (Nemuadmin / nemuuser) or a user defined username/password. Therefore, correct username and password must be used to log on to the BTS.


© Nokia 2017

Figure 1 Connect view - Authentication is always enabled and username/password requested

7

SW DOWNLOAD AND ACTIVATION You need to have an internet connection available to download the BTS SW fromNOLS (Nokia Online Services). Path to locate the SW files in NOLS is Care – Software Supply Tool - Software Catalog – Radio Network – Base Stations – Flexi Zone WCDMA BTS – WZ9.1 SW - WZ9.1 2.1 SW Release

Select the WZ9.1 2.1 release build WZ9.1_2000_416_15 and download it to your PC. The BTS SW can also be delivered on a removable media (DVD, for example). Consistency of DVD SW package can be monitored with BTS Site Manager T ool located in Software Menu / Option “SW Versions”. There are two different cases for SW download and activation. Case 1: BTS site has connection to th e NetAct The NetAct will manage the SW (that is, checks the SW version and, if it is d ifferent than the SW in the NetAct database, downloads new SW). Case 2: BTS has no connection to NetAct The SW upgrade can be done with BTS Site Manager as described in the following chapter.


© Nokia 2017

7.1

SW upg rade steps with BTS Site Manager 1.

Click Connect button (‘Local’ for IP address)

BTS Site Manager warns about incompatible software version. You can proceed to update WCDMA SW by clicking the Update SW button. Only the SW update functionality is available in BTS Site Manager until WCDMA SW is activated. 2. Click the Update SW butt on

The Update SW to BTS Site dialog box will be ope ned. 3.

Click the Select File butt on - To locate the master file containing the new software.

-

-

4.

The Select Build Descriptor dialog box opens. Locate and select the master file (TargetBD.xml or SW package zip file), and click the Open button. If you select the zip file, the files will be decompressed when you click Open. The Select Build Descriptor dialog box closes and the new SW version is displayed in the Update SW to BTS Site dialog box.

Select the Ac tivate SW After Update check bo x - To enable the activation of the new software in accordance with SW updating.

If you do not want to activate the new software at the same time with updating it, you can leave the option unchecked, and the SW is downloaded to the BTS site in the background only. To activate the SW later with Activate SW After Update selected, you have to perform the SW update again. 5.

Click the Update butto n

-

The Update Progress steps show the transfer s tatus of files. DL time depends on DCN and amount of downloaded data. Wait for the SW update complete notification. If the Activate SW After Update check box was selected, the SW will be activated an d the site will be reset.

If the SW down load fails, update the software again If you want to view information on the SW download, click the View Report button. The Software Update Report dialog box opens. 6.

8

Click the Close butto n - To close the dialog box.

ADDITIONAL SECURITY ENHANCEMENT Feature (RAN2423, SW verification Agent) enhances the security of the software downloaded and activated. Secure boot enforces the verification and execution of trusted software. The software that verifies the integrity of the executable software is called Software Verification Agent.


© Nokia 2017

Before the software update, the software-update packages are downloaded using secure file transfer method and stored securely in the network element. The network element calculates hash value of the software, signs the hash, and stores it together with the software package. With the hard security enabled, the BTS executes only verified software. The hash value of the software package is calculated again and compared with the stored and signed hash value. If the hash values match, the software is executed. If the verification of software package fails in SW activation phase, activation is stopped and alarm is raised. If the verification of software package fails in BTS startup, SW fallback is executed and BTS verifies the fallback software package.

9

WCDMA BTS LICENSE FREE PERIOD When a new BTS site is taken into use, the BTS can be commissioned at the site directly to its definitive operating configuration and features, and download the required licenses remotely later on. License management late activation enables the use of all licensed features without license restrictions for 14 days, starting f rom SW upgrade and establishing connection to the NTP server. If the 14 days trial period has been exceeded, still the O&M remote connection to a BTS can be maintained and LKs can be imported to BTS via NetAct License management or via BTS Site Manager.

10

OPERATING DOCUMENTATION BTS Site Manager has an online help system available through the Help menu and f rom the software as context-sensitive Help. The Online Help is available for browsing in the Task Selection view opened after launch of BTS Site Manager. More detailed instructions for installing and launching BTS Site Manager SW seeWCDMA RAN, Rel. WCDMA15FZ, Operating Documentation.

11

APPENDICES / REFERENCES WCDMA RAN, Rel. WCDMA15FZ, Operating Documentation


© Nokia 2017

Disclaimer The information in this document applies solely to the hardware/software product (“Product”) specified herein, and only as specified herein. Reference to “Nokia” later in this document shall mean the respective company within Nokia Group of Companies with whom you have entered into the Agreement (as defined below). This document is intended for use by Nokia's customers (“You”) only, and it m ay not be used except for the purposes defined in the agreement between You and Nokia (“Agreement”) under which this document is distributed. No part of this document may be used, copied, reproduced, modified or transmitted in any form or means without t he prior written permission of Nokia. If You have not entered into an Agreement applicable to the Product, or if that Agreement has expired or has been terminated, You may not use this document in any manner and You are obliged to return it to Nokia and destroy or delete any copies thereof. The document has been prepared to be used by professional and properly trained personnel, and You assume full responsibility when using it. Nokia welcomes your comments as part of the process of continuous development and improvement of the documentation. This document and its contents are provided as a convenience to You. Any information or statements concerning the suitability, capacity, fitness for purpose or performance of the Product are given solely on an “as is” and “as available” basis in this document, and Nokia reserves the right to change any such information and statements without notice. Nokia has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors and omissions, and Nokia will correct errors that You identify in this document. Nokia's total liability for any errors in the document is strictly limited to the correction of such error(s). Nokia does not warrant that the use of the software in the Product will be uninterrupted or error-free. NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT. This document is Nokia proprietary and confidential information, which may not be distributed or disclosed to any third parties without the prior written consent of Nokia. Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective owners. Copyright © 2016 Nokia. All rights reserved.

Important Notice on Product Safety This product may present safety risks due to laser, electricity, heat, and other sources of danger. Only trained and qualified personnel may install, operate, maintain or otherwise handle this product and only after having carefully read the safety information applicable to this product. The safety information is provided in the Safety Information section in the “Legal, Safety and Environmental Information” part of this document or documentation set. Nokia is continually striving to reduce the adverse environmental effects of its products and services. We would like t o encourage you as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging and follow the recommendations for power use and proper disposal of our products and their components. If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia for any additional information.


© Nokia 2017

Change Note Forms Release Delivery: WZ9.1 2.1 Product Family: WCDMA BTS Product: Flexi Zone WCDMA BTS

Approval date: 25-Apr-2017


1.0

Approval date

WZ9.1 2.1 SW Change Note Forms - Page 1/22 Version 1.0 Confidential

© Nokia 2017

WCDMA BTS CN-id: WZ91187

Title: [WZ9.1.2.0][LED]BTS status LED display Error when BTS is Uncommissioned Version of the SW-build: WZ9.1_2000_416_10 Valid for Product(s): Flexi Zone WCDMA BTS

References:

Reason for the Change Note: Change 1: (PR209523) Summary of the original problem: BTS status LED display Error when BTS is uncommissioned. How end user/operator could detect the problem: SW downloading or commission file downloading when BTS is uncommissioned. Description how problem can be detected: During SW downloading or commission file downloading when BTS is unc ommissioned, both BTS status LED and SEM LED should show “Stable Yellow” however they are showing “Blinking Yellow”. Description of the fault: BTS status LED display Error when BTS is uncommissioned. Dependency on configuration: None. Faulty component and version: BTSOM. Faulty component first delivered in(e.g. release, CD): WZ9.1 Impact to End-User: None. WZ9.1 2.1 SW Change Note Forms - Page 2/22 Version 1.0 Confidential

© Nokia 2017

Impact to Operator: When BTS is in uncommissioned state, BTS status LED shows wrong color during AutoConfiguration. Workaround: None. Description of the correction: BTSOM would change BTS status LED display color during SW downloading /commission file downloading when BTS is uncommissioned. Risk analysis of the correction: None. Correction effects: -Interface effects: None. -Customer effects: None. -Test requirements: None.

Corrected Fault Reports: PR209523 [WZ9.1.2.0][LED]BTS status LED display Error when BTS is Uncommissioned

Modified components: Component BTSOM.OnlineHelp.-

Version *Net element 295041 WL9.1_BTSSM_ 1408_077_02

*SW-type

*Unit

Change effects: Effects on end-user None. Effects on Operator When BTS is in uncommissioned state, BTS status LED Would show correct color during AutoConfiguration. Customer Impact Change 1: (PR209523) Operation & Maintenance


© Nokia 2017

Testing Instructions for the change Pre-requirements: BTS is "On air and the OAM status is Connected" - BTS commissioned, Bluetooth disabled, no alarms are visible on BTSSM, The BTS Status LED is “Stable Green” . Test execution: 1. On BTSSM, click "configuration"-"configuration Reset", BTS will reset. 2. After BTS is up, the BTS is uncommissioned, Alarm 4030 is raised on BTSSM, BTS LED i s displaying "Blinking Yellow". 3. When BTS is uncommissioned, make SW downloading and commission file downloading. Expected results: Both the BTS status LED and SEM LED show "Stable Yellow". Unexpected results: The BTS status LED shows "Blinking Yellow".


© Nokia 2017


Title: SFP auto-negotiation fail Version of the SW-build: WZ9.1_2000_416_04 Valid for Product(s): Flexi Zone WCDMA BTS

References:

Reason for the Change Note: Change 1: (PR218932) Summary of the original problem: SFP auto-negotiation fail. How end user/operator could detect the problem: After BTS interface is up and BTS is on air, set the FWFJ Optical GE interface to auto-negotiation and enable the auto-negotiation function of the Switch port connected to the FWFJ. Description of the fault: Support for SFP interface auto-negotiation was not available. Dependency on configuration: NA. Faulty component and version: TRS Software. Faulty component first delivered in(e.g. release, CD): WZ9.1 Impact to End-User: NA. Impact to Operator: Cannot use the BTS if the connected Switch enables the port auto-negotiation function. WZ9.1 2.1 SW Change Note Forms - Page 5/22 Version 1.0 Confidential

© Nokia 2017

Solution / Workaround : Workaround: NA. Description of the correction: TRS SW adjusted to support the auto-negotiation function. Risk analysis of the correction: NA. Correction effects: -Interface effects: NA. -Customer effects: NA. -Test requirements: NA.

Corrected Fault Reports: PR218932 [WZ9.1 2.0]SFP auto-negotiation fail

Modified components: Component FTM_R3_LN70_L NT50_FZP_WZ91 _MP2_2017.03

Version *Net element FTM_R3_LN70_ LNT50_FZP_WZ 91_MP2_2017. 03.02_0003

*SW-type

*Unit

Change effects: Effects on end-user NA. Effects on Operator Operator can use the BTS if the connected Switch enables the port auto-negotiation function. Customer Impact Change 1: (PR218932) Operation & Maintenance


© Nokia 2017

Testing Instructions for the change Pre-requirements: SFP and optical fiber are connected to the BTS and the Switch. BTS is uploaded with correct SW and powered on. Test execution: 1. Configure AutoDetect for EIF1 and the switch port to which the BTS is connected is also c onfigured AutoNegotiation enabled. 2. Configure 1000Mbit/s full duplex for EIF1 and the switch port to which the BTS is connected is also configured to 1000Mbit/s full duplex. Expected results: The link between BTS and Switch is up and the BTS is on air. Unexpected results: The link is down for Step1 and up for Step2.


© Nokia 2017


Title: Throughput KPIs are not updated Version of the SW-build: WZ9.1_2000_416_09 Valid for Product(s): Flexi Zone WCDMA BTS

References:

Reason for the Change Note: Change 1: (NA05991345,NA06001438) Summary of the original problem: NTP server is not accessible. Description of the problem: Throughput KPIs were not updated, BTS time was not corrected via NTP. How end user/operator could detect the problem: Configure NTP to use mplane IP address and disconnect ETH1. Description how problem can be detected: When NTP is configured to use mplane IP address and ETH1 is disconnected, throughput KPIs are not updated and BTS time was not corrected via NTP, Therefore NTP server is not accessible. Description of the fault: NTP server is not accessible so BTS time is not corrected via NTP leading to Throughput KPIs not being updated. Dependency on configuration: Following conditions must be met for the fault to occur: - NTP is configured to use mplane IP address. - ETH1 port (LMT) is not connected, i.e not in a RUNNING state. Faulty component and version: LFS/PS WZ9.1 WZ9.1 2.1 SW Change Note Forms - Page 8/22 Version 1.0 Confidential

© Nokia 2017

Faulty component first delivered in(e.g. release, CD): WZ9.1 Impact to End-User: None. Impact to Operator: No throughput KPI updates, incorrect system time on BTS. Workaround: Configure NTP to use an IP address that is assigned to ETH0 port. Description of the correction: The incorrect check has been removed from the NTP daemon code. Risk analysis of the correction: A small change is done to the NTP code, an impact on any other functionality is unlikely. Correction effects: -Interface effects: None. -Customer effects: Throughput KPI is updated, the system time will be correct via NTP on BTS. -Test requirements: None.

Corrected Fault Reports: NA05991345 Throughput KPIs are not updated NA06001438 NTP server is not accessible for FWGP

Modified components: Component LFS.-

Version *Net element FB_FZM_PS_LFS _OS_2014_05_ 148

*SW-type

*Unit

Change effects: Effects on end-user None. Effects on Operator Throughput KPI is updated, the system time will be correct via NTP on BTS. WZ9.1 2.1 SW Change Note Forms - Page 9/22 Version 1.0 Confidential

© Nokia 2017

Customer Impact Change 1: (NA05991345,NA06001438)

Testing Instructions for the change Pre-requirements: NTP server is accessible for FWGP. Test execution: 1. NTP is configured to use mplane IP address. 2. Disconnect ETH1. Expected results: Throughput KPI is updated, system time is correct via NTP on BTS. Unexpected results: Throughput KPI is not updated, BTS time is not corrected via NTP.


© Nokia 2017


Title: [WZ9.1 2.0][LED Indications]The source of Alarm6821 is inconsistent between BTSSM and "on-line-help" Version of the SW-build: WZ9.1_2000_416_11 Valid for Product(s): Flexi Zone WCDMA BTS

References:

Reason for the Change Note: Change 1: (PR211382) Summary of the original problem: The source of Alarm 6821 is inconsistent between BTSSM and "on-line-help". How end user/operator could detect the problem: When TRS alarm 6821 is raised. Description of the fault: The source of alarm 6821 displayed in BTS Site Manager is not consistent with the on-line-help information. Dependency on configuration: NA. Faulty component and version: BTSSM WZ9.1 Faulty component first delivered in(e.g. release, CD): WZ9.1 Impact to End-User: None. Impact to Operator: The system will function properly but the inconsistent documentation may lead to confusion. WZ9.1 2.1 SW Change Note Forms - Page 11/22 Version 1.0 Confidential

© Nokia 2017

Workaround: None. Description of the correction: RISE and on-line help documentation updated to correctly reflect actual operation. Risk analysis of the correction: None. Correction effects: -Interface effects: None. -Customer effects: Corrects customer documentation. -Test requirements: None.

Corrected Fault Reports: PR211382 [WZ9.1 2.0][LED Indications]The source of Alarm6821 is inconsistent between BTSSM and "on-line-help"

Modified components: Component RISE.EFS.OnlineHelp.-

Version *Net element WCDMA WBTS_SYNC_73 477, WL9.1_BTSSM_ 1408_077_02

*SW-type

*Unit

Change effects: Effects on end-user NA. Effects on Operator The system will function properly and the documentation will be consistent with the function. Customer Impact Change 1: (PR211382) Operation & Maintenance


© Nokia 2017

Testing Instructions for the change Pre-requirements: BTS is "On air and the OAM status is Connected" - BTS commissioned, Bluetooth disabled, No alarms are visible on BTSSM, The BTS Status LED is “Stable GREEN”, Set NTP as time and frequency sync. Test execution: 1. Use iptables command to disable NTP sync. 2. Alarm 6821 occurs on BTSSM. Expected results: The source of Alarm 6821 should be consistent between BTSSM and "on-line-help". Unexpected results: The source of Alarm 6821 is inconsistent between BTSSM and "on-line-help"


© Nokia 2017


Title: [WZ9.1.3.0][SWBT] Critical alarm “RF Module Failure” occurred after power off/on Version of the SW-build: WZ9.1_2000_416_07 Valid for Product(s): Flexi Zone WCDMA BTS

References:

Reason for the Change Note: Change 1: (PR222290) Summary of the original problem: When powering off then powering on the BTS, RF software fails and alarm 1925: "RF Module Failure" is raised. How end user/operator could detect the problem: Problem can be detected by disconnecting power supply from the BTS and connecting it again. Description how problem can be detected: When disconnecting power supply from the BTS then connecting it again, critical alarm "RF Module Failure" occurs. Description of the fault: The failure happens due to 7Hz Jitter Cleaner prolonged initialization which looks like init failure for RFSW. Dependency on configuration: Problem can be observed on FZP units with new 7Hz Jitter Cleaner. Faulty component and version: RFSW. Faulty component first delivered in(e.g. release, CD): WZ9.1


© Nokia 2017

Impact to End-User: No service from impacted RFSW. Impact to Operator: Device can't be used. Workaround: NA. Description of the correction: Problem is fixed by extending Jitter Cleaner init time and excluding Jitter Cleaner status from RFSW init result. Risk analysis of the correction: RFSW init time extended by 300 ms and Jitter Cleaner failure will be caught during carrier creation and not during RFSW initialization. Correction effects: -Interface effects: None. -Customer effects: Device can be used without any problems. -Test requirements: 7Hz Jitter Cleaner on board.

Corrected Fault Reports: PR222290 [WZ9.1.3.0][SWBT] Critical alarm “RF Module Failure” occurred after power off/on

Modified components: Component RF_FZM.-

Version FZM07.02.R02 W

*Net element

*SW-type

*Unit

Change effects: Effects on end-user None. Effects on Operator After power off and power on, the device can be used successfully. Customer Impact Change 1: (PR222290) Operation & Maintenance Device can't be used.


© Nokia 2017

Testing Instructions for the change Pre-requirements: BTS is OnAir. Test execution: Power off BTS then power on BTS. Expected results: Cell can recover to OnAir state. Unexpected results: Critical alarm "RF Module Failure" is raised and cell can't be OnAir.


© Nokia 2017


Title: [WZ9.1 2.0][LED Indications]BTS status LED display Error when major TRSW faults 61613, 61058, 61010 and 61400 occur Version of the SW-build: WZ9.1_2000_416_10 Valid for Product(s): Flexi Zone WCDMA BTS

References: WBTS_SYNC_70196 Reason for the Change Note: Change 1: (PR217472) Summary of the original problem: BTS status LED display Error when major TRSW faults 61613, 61058, 61010 and 61400 occurs. How end user/operator could detect the problem: When Major/Critical TRSW faults are raised. Description how problem can be detected: When major TRSW faults are raised, BTS status LED should show Blinking Red, however it wouldn't. Description of the fault: BTS status LED display error for all major TRSW faults, including faults 61613, 61058, 61010 and 61400. Dependency on configuration: None. Faulty component and version: BTSOM. Faulty component first delivered in(e.g. release, CD): WZ9.1 Impact to End-User: None. WZ9.1 2.1 SW Change Note Forms - Page 17/22 Version 1.0 Confidential

© Nokia 2017

Impact to Operator: BTS status LED show wrong color and mismatch Site Manger on-line help information when major TRSW faults are raised. Workaround: None. Description of the correction: BTSOM will change BTS status LED behavior when Major/Critical TRSW faults are raised. Risk analysis of the correction: None. Correction effects: -Interface effects: None. -Customer effects: None. -Test requirements: None.

Corrected Fault Reports: PR217472 [WZ9.1 2.0][LED Indications]BTS status LED display Error when major TRSW faults 61613, 61058, 61010 and 61400 occur

Modified components: Component BTSOM.-

Version Not

*Net element

*SW-type

*Unit

Change effects: Effects on end-user NA. Effects on Operator BTS status LED would show correct color and match Site Manger on-line help information when major and critical TRSW faults raise. Customer Impact Change 1: (PR217472) Operation & Maintenance BTS Site Manager LED display behavior change for TRSW faults.


© Nokia 2017

Testing Instructions for the change Pre-requirements: BTS is On Air. Test execution: 1. Change M-plane address to trigger alarm 61010. 2. Disconnect the NTP server with BTS and reset BTS to trigger alarm 61613. 3. Configure NTP as frequency sync and use iptables command to disable NTP Sync, alarm 61058 would be triggered. 4. Delete NTP license and configure NTP as freq sync, alarm 61400 would be triggered.

Expected results: When alarms 61010, 61613, 61058 and 61400 occur on BTSSM, the Transport LED should display Stable Red and the BTS LED should display Blinking Red. Unexpected results: When alarms 61010, 61613, 61058 and 61400 occur on BTSSM, the Transport LED is displaying Stable Red and the BTS LED is displaying Stable Green.


© Nokia 2017


Title: SEC: tcpdump ≤ 4.8.1 - Multiple Vulnerabilities - 4.9 Version of the SW-build: WZ9.1_2000_416_03 Valid for Product(s): Flexi Zone WCDMA BTS

References:

Reason for the Change Note: Change 1: (PR214901) Multiple vulnerabilities have been discovered in tcpdump. The vulnerabilities might result in denial of service or the execution of arbitrary code. Workaround: None. Description of correction: Fixed the security issues found. Correction effects: tcpdump security issue will be fixed. Corrected Fault Reports: PR214901 SEC: tcpdump ≤ 4.8.1 - Multiple Vulnerabilities - 4.9

Modified components: Component LFS.-

Version *Net element FB_FZM_PS_LFS _OS_2014_05_ 147


*SW-type

*Unit

© Nokia 2017

Change effects: Effects on end-user None. Effects on Operator Security vulnerability. Customer Impact Change 1: (PR214901)

Testing Instructions for the change Pre-requirements:

Test execution: Get tcpdumps and check for security issues. Expected results: No security issues found. Unexpected results: Security issue was found.


© Nokia 2017

Disclaimer The information in this document applies solely to the hardware/software product (“Product”) specified herein, and only as specified herein. Reference to “Nokia” later in this document shall mean the respective company within No kia Group of Companies with whom you have entered into the Agreement (as defined below). This document is intended for use by Nokia's customers (“You”) only, and it m ay not be used except for the purposes defined in the agreement between You and Nokia (“Agreement”) under which this document is distributed. No part of this document may be used, copied, reproduced, modified or transmitted in any form or means without t he prior written permission of Nokia. If You have not entered into an Agreement applicable to the Product, or if that Agreement has expired or has been terminated, You may not use this document in any manner and You are obliged to return it to Nokia and destroy or delete any copies thereof. The document has been prepared to be used by professional and properly trained personnel, and You assume full responsibility when using it. Nokia welcomes your comments as part of the process of continuous development and improvement of the documentation. This document and its contents are provided as a convenience to You. Any information or statements concerning the suitability, capacity, fitness for purpose or performance of the Product are given solely on an “as is” and “as available” basis in this document, and Nokia reserves the right to change any such information and statements without notice. Nokia has m ade all reasonable efforts to ensure that the content of this document is adequate and free of material errors and omissions, and Nokia will correct errors that You identify in this document. Nokia's total liability for any errors in the document is strictly limited to the correction of such error(s). Nokia does not warrant that the use of the software in the Product will be uninterrupted or error-free. NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT. This document is Nokia proprietary and confidential information, which may not be distributed or disclosed to any third parties without the prior written consent of Nokia. Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective owners. Copyright © 2016 Nokia. All rights reserved.

Important Notice on Product Safety This product may present safety risks due to laser, electricity, heat, and other sources of danger. Only trained and qualified personnel may install, operate, maintain or otherwise handle this product and only after having carefully read the safety information applicable to this product. The safety information is provided in the Safety Information section in the “Legal, Safety and Environmental Information” part of this document or documentation set. Nokia is continually striving to reduce the adverse environmental effects of its products and services. We would like to encourage you as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging and f ollow the recommendations for power use and proper disposal of our products and their components. If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia for any additional information.


© Nokia 2017

Verification Document Release Delivery: WZ9.1 2.1 Product Family: WCDMA BTS Product: Flexi Zone WCDMA BTS Approval date: 25-Apr-2017

Verification Document Report - Page 1/10 Version 2.0 Confidential

© Nokia 2017

Table of Contents 1. 2. 3.

Purpose ................................................................................................................................ 4 Summary of test phases and test cases ............................................................................... 4 Basic regression testing Phase ............................................................................................ 4 3.1 Configurations ................................................................................................................ 4 3.2 Amount of test cases ...................................................................................................... 4 3.3 Results ........................................................................................................................... 5 4. I&V Testing ........................................................................................................................... 6 4.1 CR1 Regression Phase .................................................................................................. 6 4.1.1 Configuration ........................................................................................................... 6 4.1.2 Am ount of Test Cases ............................................................................................. 6 4.1.3 Testin g Result .......................................................................................................... 6 4.2 CR2 Regression Phase .................................................................................................. 7 4.3 New Feature/CN/CNI Testing ......................................................................................... 7 4.3.1 Configurations ......................................................................................................... 7 4.3.2 Am ount of Test cas es .............................................................................................. 7 4.3.3 Testin g Result .......................................................................................................... 7 5. Performance testing ............................................................................................................. 7 5.1 Configurations ................................................................................................................ 7 5.2 Amount of test cases ...................................................................................................... 8 5.3 Results ........................................................................................................................... 8 6. Stability................................................................................................................................. 8 6.1 Configurations ................................................................................................................ 8 6.2 Amount of test cases ...................................................................................................... 8 6.3 Results ........................................................................................................................... 8 7. FiVe test ............................................................................................................................... 8 8. Compatibility Information ...................................................................................................... 8

Contact: Contact your local Nokia Solutions and Networks support.



1.0

First approved version

© Nokia 2017

Abbr evi ati on s: CR1 CR2 VR CN NF BRT


Abbreviations Continuous Regression 1 Continuous Regression 2 Variable Regression Change Notes New Feature Basic Regression testing

© Nokia 2017

1. PURPOSE This document presents the testing results summary for WCDMA BTS software release WZ9.1 2.1 R&D testing. Test environments are also presented in this document.

2. SUMMARY OF TEST PHASES AND TEST CASES The following table show number of TC that were performed for WZ9.1 2.1 P8 build in Integration and Verification (I&V) and Performance and Stability (PET and STABI).

Test Phase

Nbr of test cases

SW update tests for P8 build in BRT

140

All regression tests done for WZ9.1 2.1

64

All regression tests for P8 build in PET & STABI

13

Total

3. BASIC REGRESSION TESTING PHASE 3.1 Configurations Final regression done for P8 package has been tested in the following environment: Configuration

SW Level

FWFF (A.102)

WZ9.1 2.1

F2-x-2-2TX-2RX FWGM (A.203)

WZ9.1 2.1

F1-x-1-2TX-2RX FWGP (A.101)

WZ9.1 2.1

F1-x-1-2TX-2RX

3.2 Amount of test cases Totally, 70 cases were tested for SW upgrade path for FZP with earl ier HW version (FWFF A.102). WZ9.1_0000_247_00 -> WZ9.1_2000_416_15 WZ9.1_0000_268_00-> WZ9.1_2000_416_15


© Nokia 2017

WZ9.1_0000_283_02-> WZ9.1_2000_416_15 WZ9.1_0000_283_04-> WZ9.1_2000_416_15 WZ9.1_1000_361_14-> WZ9.1_2000_416_15 WZ9.1_1000_361_16-> WZ9.1_2000_416_15 WZ9.1_2000_416_01-> WZ9.1_2000_416_15 40 cases were tested for SW upgrade path for FZP with newer HW version (FWGM A.203). WZ9.1_0000_283_04-> WZ9.1_2000_416_15 WZ9.1_1000_361_14-> WZ9.1_2000_416_15 WZ9.1_1000_361_16-> WZ9.1_2000_416_15 WZ9.1_2000_416_01-> WZ9.1_2000_416_15 30 cases were tested for SW upgrade path for FZM (FWGP A.101). WZ9.1_1000_361_14-> WZ9.1_2000_416_15 WZ9.1_1000_361_16-> WZ9.1_2000_416_15 WZ9.1_2000_416_01-> WZ9.1_2000_416_15

3.3 Results All Test Cases PASSED with no issue found using WZ9.1 2.1 P8 packageWZ9.1_2000_416_15. Test Case

Result

Site Manager Installation

PASSED

SW Download and Activation Upgrade to N

PASSED

Template Commissioning

PASSED

AMR-HSPA call test

PASSED

Cell Block and Unblock (with normal priority)

PASSED

Snapshot collection

PASSED

BTS reset from SEM

PASSED

BTS Block-Unblock

PASSED

SW Rollback

PASSED


© Nokia 2017

4. I&V TESTING 4.1 CR1 Regress io n Phase 4.1.1 Configuration The following are configurations used for CR1 regression of WZ9.1 2.1. Configuration

SW Level

FWGP

WZ9.1 2.1

FWFE

WZ9.1 2.1

4.1.2 Amo unt of Test Cases Totally 64 cases were tested.

4.1.3 Testing Result FZP CR1 report •

Tested Package: WZ9.1_2000_416_11 WZ9.1_2000_416_15

•

•

Platform Status: PASSED. Build blocker: None.

FZM CR1 report •

Tested Package: WZ9.1_2000_416_11 WZ9.1_2000_416_15

•

Platform Status: PASSED.


© Nokia 2017

•

Build blocker: None.

4.2 CR2 Regress io n Phase N/A, no CR2 planned for MP2.1

4.3 New Feature/CN/CNI Testi ng 4.3.1 Configurations The following are configuration used for New Feature and CNI testing done in I&V. Confi gur ation

New Featur e/CNI

FWGP

CNI-17539

FWFJ

CNI-17539

FWGL

CNI-17539

4.3.2 Amo unt of Test cases 20 Test Cases tested for CNI-17539 using SW level WZ9.1 2.1

Overall 20 Test Cases are tested for WZ9.1 2.1

4.3.3 Testing Result New Featur e/ CN/CNI

Passing Ratio

Executi on Ratio

CNI-17539

100%

100%

Overall Pass Ratio

100%

100%

5. PERFORMANCE TESTING 5.1 Configurations No new PET features in the content so the stability testing is enough fr om the PET testing point of view.


© Nokia 2017

5.2 Amount of test cases NA.

5.3 Results NA.

6. STABILITY 6.1 Configurations Configuration

Stability test

FWFG

High load

FWFJ

Normal load

FWFG

Normal load

FWGP

Normal load

. 6.2 Amount of test cases Stability testing includes 13 test cases.

6.3 Results 120 hour stability PASSED with MODERATE load stability with P8 SW build (WZ9.1_2000_416_15). 72 hour stability PASSED with HIGH load stability with P8 SW build (W Z9.1_2000_416_15).

7. FIVE TEST NA.

8. COMPATIBILITY INFORMATION TEAM

RNC HW

I&V

mcRNC

PET

CRNC

RNC SW

R_QNCB.14.26.5_11.2 (RU50EP1) QX 15.26-0 CORR110_2


NetAct

17.2.1. 941 N/A

OMS

R_GOMS7_1.3.1.0.release_oms.corr22 (RU50) R_GOMS7_1.7.1.0.release_oms.corr40 (WCDMA16)

© Nokia 2017

(WCDMA16) CRNC

QX 16.24-0 CORR10 (WCDMA17)


N/A

R_GOMS7_1.10.release_oms.corr3 (WCDMA17)

© Nokia 2017

RET-KA-At 2 01 Release Notes

Recommend Documents