pdms naming convention

Naming Convention

Disclaimer Information of a technical nature, and particulars of the product and its use, is given by AVEVA Solutions Ltd and its subsidiaries without warranty. AVEVA Solutions Ltd and its subsidiaries disclaim any and all warranties and conditions, expressed or implied, to the fullest extent permitted by law. Neither the author nor AVEVA Solutions Ltd, or any of its subsidiaries, shall be liable to any person or entity for any actions, claims, loss or damage arising from the use or possession of any information, particulars, or errors in this publication, or any incorrect use of the product, whatsoever.

Copyright Copyright and all other intellectual property rights in this manual and the associated software, and every part of it (including source code, object code, any data contained in it, the manual and any other documentation supplied with it) belongs to AVEVA Solutions Ltd or its subsidiaries. All other rights are reserved to AVEVA Solutions Ltd and its subsidiaries. The information contained in this document is commercially sensitive, and shall not be copied, reproduced, stored in a retrieval system, or transmitted without the prior written permission of AVEVA Solutions Ltd Where such permission is granted, it expressly requires that this Disclaimer and Copyright notice is prominently displayed at the beginning of every copy that is made. The manual and associated documentation may not be adapted, reproduced, or copied, in any material or electronic form, without the prior written permission of AVEVA Solutions Ltd. The user may also not reverse engineer, decompile, copy, or adapt the associated software. Neither the whole, nor part of the product described in this publication may be incorporated into any third-party software, product, machine, or system without the prior written permission of AVEVA Solutions Ltd, save as permitted by law. Any such unauthorised action is strictly prohibited, and may give rise to civil liabilities and criminal prosecution. The AVEVA products described in this guide are to be installed and operated strictly in accordance with the terms and conditions of the respective licence agreements, and in accordance with the relevant User Documentation. Unauthorised or unlicensed use of the product is strictly prohibited. First published 1994 © AVEVA Solutions Ltd and its subsidiaries AVEVA Solutions Ltd, High Cross, Madingley Road, Cambridge, CB3 0HB, United Kingdom.

Trademarks AVEVA and Tribon are registered trademarks of AVEVA Solutions Ltd or its subsidiaries. Unauthorised use of the AVEVA or Tribon trademarks is strictly forbidden. AVEVA product names are trademarks or registered trademarks of AVEVA Solutions Ltd or its subsidiaries, registered in the UK, Europe and other countries (worldwide). The copyright, trade mark rights, or other intellectual property rights in any other product, its name or logo belongs to its respective owner.

Page 2 of 58 Catref Standard

AVEVA Solutions Ltd Protected by copyright see frontispiece

PDMS Catalogue

Contents 1 2 3 4

Naming Components Deriving Bolt Names COCO Table Coding Component NAME Codes



PDMS Catalogue

1

Naming Components

Size Facing Rating Component Type Standard number International Standard

International Standard: A B D I M P J

ANSI Standard (ANSI) British Standard (BS) Deutsche Institut für Normung (DIN) ISO Manufacturers Standardisation Society (MSS) American Petroleum Institute (API) Japanese Standards

Standard BS1560, ANSI B16.9, DIN 2050 etc. Type PDMS GTYP

ATTA, TEE, BEND, ELBO, REDU, FLAN, OLET, NOZZ CROSS, VALVE, INST etc.

Rating ANSI, BS, API, MSS DIN (ND=Nenndruck)

125#, 150#, 300#, 600#, 900#, 1500#, 2500#, 3000#, 6000#, 9000# 10, 16, 25, 63, 100, 160, 250, 320, 400

(#=lb/sq. in.)

Facing ANSI,BS,API,MSS,DIN RF Raised Face FF Flat Face RTJ Ring Type Joint SCF Screwed Female SCM Screwed Male TUB Plain End BLF Blinded BWD Buttweld End LIN Lined Facing

ANSI,BS,API,MSS TO Tongue GR Groove MA Male FE Female

DIN FE NU VS RS

Tongue Groove Projection Recess

Size: Nominal bore sizes in inches or mm Typical Catalogue Names: BARC200 AAEA200 AAFWBD0 DCZFBP0 DAVHBPR Page 4 of 58 Catref Standard

= BS1640 BW CONC REDUCER = ANSI B16.9 BW ELBOW 90 DEG = ANSI B16.5 WN FLANGE CLASS 300 RF = DIN 2633 FLANGED NOZZLE PN16RF = DIN 3202 GLOBE VALVE PN16 RF AVEVA Solutions Ltd Protected by copyright see frontispiece

PDMS Catalogue

2

Deriving Bolt Names

Bolts are named according to the following convention

Bore size code Flange Rating Flange Facing Type M=Machine Bolt S=Stud Bolt Standard A=Ansi D=DIN Flange Face: A FF B RF C FE DIN2512 D NU DIN2512 E F G H J K L M N P V13 DIN2513 Q R13 DIN2513 R


Flange Rating: A PN 125# B PN 150# C PN 250# D PN 300# E PN 400# F PN 600# G PN 900# H PN 1500# J PN 2500# K PN 5000# L PN 2.5 M PN 6 N PN 10 P PN 16 Q PN 25 R PN 40 S PN 63 T PN 100 U PN 160 V PN 250 W PN 320 X PN 400 Y PN 75# Z PN 10000#

Bore code: A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9

DIN 6 8 10 15 20 25 32 40 50 65 80 90 100 125

ANSI 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1.1/4" 1.1/2" 2" 2.1/2" 3" 3.1/2" 4" 5"

150 175 200

6" 7" 8"

250 300 350 400 450 500 550 600 650 700 750 800 850 900

10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"


PDMS Catalogue

3

COCO Table Coding

Connection types are coded according to the following convention:

Normally unused Rating Facing ISOGEN TYPE

Each COCO is restricted to a maximum of 4 characters to define the connection. The following types are treated as standard connections and there meanings are described below:ALL ATT BWD SWF TUB VENT

Compatible with all items Attachment Buttweld Female Socketwelding Pipe or Tubing Open to vent

SCF SCM CLOS SWM OPEN DRAN

Screwed Female Screwed Male Closed end Male Socketwelding Open end Drain connection

The following codes are used to set the connection types of flanged items. Each character defines a different attribute of the appropriate connection type. PDMS Type (char 1) F Flange facing (for Flanges, Valves etc.) G Gasket facing(To connect to flanges) W Wafer type component (Char 1 followed by normal flange COCO)


Facing (char 2) A FF A B RF B C FE DIN2512 D NU DIN2512 E F G H J K L M N P V13 DIN2513 Q R13 DIN2513 R


Rating (char 3) PN 125# PN 150# C PN 250# D PN 300# E PN 400# F PN 600# G PN 900# H PN 1500# J PN 2500# K PN 5000# L PN 2.5 M PN 6 N PN 10 P PN 16 Q PN 25 R PN 40 S PN 63 T PN 100 U PN 160 V PN 250 W PN 320 X PN 400 Y PN 75# Z PN 10000#

PDMS Catalogue

4

Component NAME Codes

Leave or Branch bore Arrive bore Special Qualifier (usually 0) Pressure Rating End connection Specific Type (WN or SO etc) Component Type Component Standard Genral Standard

Each character of the component name can be selected from the appropriate tables. Character 3 defines the component type. Character 1 is derived from the international standard columns on page 4. All other characters are derived from the component specific page as either direct information or reference to the tables. Example: To find the name of a 100NB ANSI B 16.9 LR 90 degree BW elbow Char 1 is selected from page 3 =A Char 3 is selected from the type list on page 7 =E Char 2 is then selected from page 15 =A This gives the first 3 characters as AAE Char 4 is selected from page 16 as Long Radius =A The chart at the bottom of page 16 then points to the tables to be used to get the rest of the characters Char 5 is selected from the facing table E1 or E2 page 53/54 =2 Char 6 is selected from the pressure rating table D1 page 56 =0 Char 7 is selected from D2 page 57 as Not specified =0 Finally the bore sizes are selected from table N1. There are characters for both bore sizes so the final two characters are NN This gives us a catalogue name of AAEA200NN



PDMS Catalogue

Component Type

A B C D E F G H J K L M N P Q R S T U V W X Y Z

Auto (Control Valve, specials etc.) Bend Coupling Elbow Flanges Gaskets

Closures (Cap, Plug) Miscellaneous Nipples Pipe Reducer Stub-Ends TEEs Valves Welds Atta, Support Nozzles



PDMS Catalogue

Control Valves Specials etc. Typ

A

Typ=M

Typ=N

Typ=S

Typ=W

A B C D E F G H J K L M N P Q R S Masoleian T U V W X Y Z

A B C D E F Fisher G H J K L M N P Q R S T U V Northvale W X Y Z

A B C D E F G H J K L M N P Q R S Severn T U V W X Y Z

A Worcester B C D E F G H J K L M N P Q R S T U V W X Y Z



PDMS Catalogue

Regulating valves

A A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Angle, Direct Acting Globe Ball Direct Acting Globe Butterfly

Plug Reverse acting globe

Three Way



PDMS Catalogue

Regulating valves -actuator operated

A A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Diaphragm Electric Motor

Piston - Linear Piston - Rotary

Character table reference for Auto items

A Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Bend

B

Std.

A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Not Specified



PDMS Catalogue

Bend specific type

E A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Single Tangent (LR) Double Tangent (LR) Long Radius Return (3NB) Short Radius Return(2NB)

Close Radius Medium Radius Open Radius 67.5 Deg Spring 45 Deg Spring 22.5 Deg Spring 90 Deg Bend 3D Pulled Bend 4D Pulled Bend 5D Pulled Bend Variable Radius Bend Mitre Bend 45 Deg Bend 45 Deg Bend R=1NB 90 Deg Bend R=2.5NB 45 Deg Bend R=2.5NB 45 Deg Bend R=5NB 60 Deg Bend

Character table reference for bends

B

0 Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness (generally 0) = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Coupling

C

Std.

American Std.= A A ANSI B16.9 B ANSI B16.11 C ANSI B16.3 D ANSI B16.4 E ANSI B16.18 F ANSI B16.22 G H J K L M N

British Std.= B A BS 1640 B BS 3799 C BS 1387 D BS 143 E F G H J K L M N

DIN Std.=D A B C D E F G H J K L M N

MSS Std.= M A MSS-SP83 B C D E F G H J K L M N

Manufacturers Std.= V A B C D E F G H J K L M N P Q R S T Victaulic

Example : ANSI B16.4 Straight Coupling = ADC Victaulic Coupling =VTC



PDMS Catalogue

Coupling Type

C A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Dow Radial Clamp Full Coupling Half Coupling

Flange Adapter, Radial Lock

Union Victaulic

Character table reference for Couplings

C




PDMS Catalogue

Elbows Std.

E

American Std.= A A ANSI B16.9 B ANSI B16.11 C ANSI B16.28 D ANSI B16.5 E ANSI B16.3 F ANSI B16.4 G ANSI B16.22 H ANSI B16.18 J ANSI B16.24 K L M N

British Std.= B A BS 1640 B BS 3799 C BS 1740 D BS 1965 E BS 1387 F BS 143 G H J K L M N

DIN Std.=D A DIN 2605 B C D E F G H J K L M N

Manufacturers Std.= P A B C D Peabody Dore E F G H J K L M N

Manufacturers Std.= V A B C D E F G H J K L M N P Q R S T Victaulic

Example : Elbow DIN 2605 = DAE Victaulic Elbow = VTE



PDMS Catalogue

Elbow specific type

E A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Long Radius (R=1.5 NB) Short Radius (R= 1 NB) 45 Deg Elbow Single Tangent (LR) Double Tangent (LR) Long Radius Return (3NB) Short Radius Return(2NB) Reducing Street Elbow Close Radius Medium Radius Open Radius 67.5 Deg Spring 45 Deg Spring 22.5 Deg Spring 90 Deg Bend 3D Pulled Bend 4D Pulled Bend 5D Pulled Bend Variable Radius Bend Mitre Bend Side Outlet Elbow 45 Deg Bend 45 Deg Elbow R=1NB 90 Deg Elbow R=2.5NB 45 Deg Elbow R=2.5NB 45 Deg Elbow R=5NB 60 Deg Elbow

Character table reference for Elbows

E Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Flanges

F

Std.

American Std.= A A ANSI B16.9 B API 600 C API 605 D ANSI B16.36 E ANSI B16.24 F G H J K L M N P Q R S

British Std.= B A BS 1770 B BS 1560 C BS 3293 D BS 4504 E BS 10 F BS 2035 G H BS 4622 J BS 4772 K L M N P Q R S

DIN Std.=D A DIN 2632 B DIN 2633 C DIN 2635 D DIN 2527 E DIN 2631 F DIN 2634 G DIN 2636 H DIN 2630 J DIN 2637 K DIN 2638 L DIN 2641 M N DIN 2512 P Q R DIN 2628 S DIN 2629

MSS Std.= M A MSS SP-44 B MSS SP-51 C D E F G H J K L M N P Q R S Manufacturers Std.= V A B C D E F G H J K L M N P Q R S T Victaulic

Example : Flange DIN 2641 = DFL Victaulic flange = VTL



PDMS Catalogue

Flange Type

F A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Blind Screwed Boss

Hub Slip on

Lap

Plate Slip on Orifice Reducing Socket Weld Threaded Victaulic Weld Neck Spacer



PDMS Catalogue

Orifice Flanges


BSP NPT SW

BSP : NPT BSP : SW NPT : BSP NPT : NPT NPT : SW BSP NPT SW

Q Weld Neck Weld Neck Weld Neck Socket Weld Socket Weld Socket Weld Screwed BSP Screwed BSP Screwed BSP Screwed NPT Screwed NPT Screwed NPT Slip on Slip on Slip on

:BSP :NPT :SW : BSP : NPT : SW : BSP : NPT : SW : BSP : NPT : SW : BSP : NPT : SW

not used



PDMS Catalogue

Reducing Flanges


R

Weld Neck concentric Weld Neck eccentric Socket Weld concentric Socket Weld eccentric Screwed BSP concentric Screwed BSP eccentric Screwed NPT concentric Screwed NPT eccentric Slip On concentric Slip On eccentric Filler Flange

Not Used

Character table reference for flanges

F Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Gaskets

G

Std.

American Std.= A A ANSI B16.20 B ANSI B16.21 C ANSI B16.5 D API 605 E F G H J K L M

British Std.= B A BS 3063 (BS10/1770/2035) B BS 3381 (BS1560) C BS 4865 (BS4504/4622/4772) D BS 1560 (BS1560) E BS 3293 (BS3293) F G H J K L M

DIN Std.=D A DIN 2690 (for DIN2501) B DIN 2691 (for DIN2512) C DIN 2692 (for DIN2513) D E F G H DIN 2697 J DIN 2698 K L M

Manufacturers std= G or = V A A B B C C D D E E F F G G H H J J K K L L M M N N P P Q Q R Graylock R S S T T Victaulic

Example : Gasket DIN 2697 = DHG Victaulic Gasket = VTG



PDMS Catalogue

Gasket Type

G A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Full Face Inside Bolt Circle Raised Face with Centring Ring Large Tongue & Groove Small Tongue & Groove Ring Type Joint Graylock Sealing Ring & Clamp Large Male / Female Small Male / Female

Victaulic Clamp



PDMS Catalogue

Gasket Thickness

G A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 1.5 mm

1/64" 1/32" 1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4"

Not specified

Character table reference for gaskets

G Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Closures

K

Std.

American Std.= A A ANSI B16.9 B ANSI B16.11 C ANSI B16.4 D ANSI B16.3 E ANSI B16.18 F ANSI B16.22 G H J K L M N P Q R S

British Std.= B A BS 1640 B BS 3799 C BS 1965 D BS 1740 E BS 143 F G H J K L M N P Q R S

DIN Std.=D A DIN 2617 B C D E F G H J K L M N P Q R S

Manufacturers Std.= G A MSS SP-44 B MSS SP-51 C D E F G H J K L M N P Q R Graylock S Manufacturers Std.= V A B C D E F G H J K L M N P Q R S T Victaulic

Example : Cap DIN 2617 = DAK Victaulic Cap = VTK



PDMS Catalogue

Closures Specific type

K A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Long Cap Short Cap Flat Closure Graylock Blind Hub

Countersunk Plug Square Head Plug Hexagonal Head Plug Round Head Plug Plain Bull Plug Tapped Bull Plug Slotted Head Plug

Victaulic Clamp

Character table reference for Caps

K Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Miscellaneous Items (sheet 1 of 2) Std.

M

American Std.= A A American Std. B C D E F G H J K L M N P Q R S

British Std.= B A British Std. B C D E F G H J K L M N P Q R S

DIN Std..= D A DIN Std. B C D E F G H J K L M N P Q R S

Manufacturer Std.= G A B C D E F G Gestra H J K L M N P Q R S

Manufacturer Std.= K A B C D E F G H J K Krupp Köppers L M N P Q R S T

Manufacturer Std..=N A B C D E F G H J K L M N Norgren P Q R S T

Manufacturer Std.= P A B C D E F G H J K L M N P Q R S Plenty Simplex T

Manufacturer Std.= R A B C D E F



H J K L M N P Q R Rhodes S T

PDMS Catalogue

Miscellaneous Items (Sheet 2 of 2) Std.

M

Manufacturer Std.= S A B C D E F G H J K L M N P Q R S Spirax Sarco T Amstrong U V W


Manufacturer Std.= T A B C D Teddington E F G H J K L M N P Q R S T U V W

Manufacturer Std.= V A B Veebee C D E F G H J K L M N P Q R S T U V W


Manufacturer Std.= Y A B C D E F G H J K L M N P Q R S T U V W Yarway

PDMS Catalogue

Miscellaneous Item types

M A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Flame Arrester Single Bellows Unit Bursting Disc Assembly Air Dryer Double Bellows Flow Indicator Filter Sight Glass Spacer for tongue and groove flanges Ball Float Trap Line blind

Pot Type Strainer Orifice Plate Spectacle Blind

Weld Basket Type Strainer Y Type Strainer T Type Strainer

Character table reference for Miscellaneous items

M Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Nipple: Standard

N

Std.

American Std.= A A ASTM A120 B ASTM A53 C ANSI B36.10 D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not specified

British Std.= B A BS 534 B BS 806 C BS 1306 D BS 1387 E BS 1600 F G H J K L M N P Q BS 3799 R BS 1740 S BS 143 T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not specified

DIN Std.=D A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not specified

Manufacturer Std.= V A B C D E F G H J K L M N P Q R S T U V Victaulic W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

Example : Nipple ASTM A120 = AAN Victaulic nipple= VTN



PDMS Catalogue

Nipple: Type

N A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Barrel Nipple

Eccentric Swage

Hexagonal Close Taper

Pipe Nipple

Concentric Swage Tank Nipple



PDMS Catalogue

Nipple End Connection


Plain x Bevel Plain x Plain Plain x Threaded NPT Plain x Threaded BSP Threaded Both Ends NPT Threaded Both Ends BSP Bevel x Threaded NPT Bevel x Threaded BSP Threaded NPT x Bevel Threaded BSP x Bevel Threaded NPT x Plain Threaded BSP x Plain Bevel x Plain Bevel x Bevel Radial Lock Both Ends Soldered, Brazed Radial Lock x Flanged Bevel x Victaulic Groove Threaded x Victaulic Groove Victaulic Groove To Groove



PDMS Catalogue

Nipple: Length


50 mm 65 mm 75 mm 100 mm 125 mm 150 mm 175 mm 200 mm 2" 250 mm 3" 400 mm 4" 5" 6" As Per Standard 9"

Not Specified

Character table reference for Nipples

N Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Pipe Standard

P

Std.

American Std.= A A ANSI B36.10 B ASTM A-106 C API 5L D ASTM A-53 E ANSI B36.3 F ANSI B36.19 G ASTM B42/B43 H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

British Std.= B A BS 534 B BS 806 C BS 1306 D BS 1387 E BS 1600 F BS 2598 G BS 3351 H BS 3600 J BS 3601 K BS 3602 L BS 3603 M BS 3604 N BS 3605 P BS 3606 Q BS 2035 R BS 2871 S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

DIN Std.=D A DIN 2448 B DIN 2458 C DIN 2462 D DIN 2463 E DIN 2916 F DIN 4376 G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

Example : Pipe DIN 2462 = DCP



PDMS Catalogue

Pipe Type

P A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Seamless Steel Pipe Centrifugally Cast Electric Fusion Welded Glass Pipe

Lined Flanged Pipe

Resistance Welded

Not Specified

Character table reference for Pipe

P Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Reducer Standard

R

Std.

American Std.= A A ANSI B16.9 B ANSI B16.11 C ANSI B16.14 D ANSI B16.5 E F ANSI B16.18 G ANSI B16.22 H J ANSI B16.24 K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

British Std.= B A BS 1640 B BS 3799 C BS 1740 D BS 1965 E BS 143 F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

DIN Std.=D A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

Manufacturer Std.= P A B C D Peabody Dore E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

Example : Reducer ANSI B16.11 = ABR



PDMS Catalogue

Reducer Type

R A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Concentric Eccentric

Hexagonal Bush

Hexagonal Nipple

Reducing Insert

Not Specified

Character table reference for Reducers

R Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

Stub-End: Standard

S

Std.

American Std.= A A ANSI B16.9 B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

British Std.= B A BS 1640 PT1 B BS 1640 PT2 C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

Example : Stub-End ANSI B16.9 = AAS



PDMS Catalogue

Stub-End Type

S A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

As Per Standard Graylock Weld Hub

Not Specified

Character table reference for Stub Ends

S Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness = Table D2 Pressure Rating = Table D1 Facing = Table E1



PDMS Catalogue

TEE Standard

T

Std.

American Std.= A A ANSI B16.9. B ANSI B16.11 C ANSI B16.3 D ANSI B16.4 E ANSI B16.5 F ANSI B16..18 G ANSI B16..22 H J ANSI B16.24 K L M N P Q R S

British Std.= B A BS 1640 B BS 3799 C BS 1740 D BS 1965 E BS 143 F G H J K L M N P Q R S

DIN Std..= D A B C D E F G H J K L M N P Q R S

Manufacturer Std.= N A Bonney Forge B C D E F G H J K L M N P Q R S T

Manufacturer Std..=P A B C D Peabody Dore E F G H J K L M N P Q R S T

Manufacturer Std.= L DIN 2615 A B C D Ladish E F G H J K L M N P Q R S

Manufacturer Std.= V A B C D E F G H J K L M N P Q R S T Victaulic

Example: TEE DIN 2615= DAT



PDMS Catalogue

TEEs

T A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

90 Deg. Fitting 45 Deg. fitting Cross Y- Piece Elbolet TEE By Full Coupling Street TEE TEE By Half Coupling Sweep TEE Double Sweep TEE Latrolet Side Outlet TEE Nipolet Side Outlet Elbow

Set On Branch (90Deg) Reinforced Set On Branch Set On Branch With Saddle Set On Branch, Var Angle Weldolet Sockolet Thredolet Sweepolet Instrument TEE

Not specified

Character table reference for Tees

T




PDMS Catalogue

Valves (sheet 1 of 2) Std.

V

American Std.= A A ANSI B16.10. B C D E F G H J K L M N P Q R

Manufacturer Std.= F A B C D E F G H J K L M N P Q R Farris S T


British Std.= B A BS 1414. B BS 16 C BS 1868 D BS 1873 E F BS 5352 G H J K L M N P Q R 3 BS 4460

DIN Std..= D A DIN 3202. B C D E Delta F G H J K L M N P Q R

Manufacturer Std..= G A B C D E Gestra F G H J K L M N Anderson Greenwood P Q R Graylock S T

Manufacturer Std.= C A B C D E F G H J K L M N P Q R Crane

Manufacturer Std.= H A B C D E F G H Hattersley Heaton J K L M N

Manufacturer Std.= K A B C D E F G H J K L M N

P Q R S T

P Q R Crosby S T Birkett Y Keystone


PDMS Catalogue

Valves (sheet 2 of 2) Std.

V

Manufacturer Std..= L A B C D Ladish E F G H J K L M N P Q R

Manufacturer Std.= M A MSS-SP-72 B C D E F G H J K L M N P Q R Marlin V Macavoy

Manufacturer Std.= S Manufacturer Std..= T A Saunders A B B C Schuf C D D E Serck Audco E F F Tuflin G Sapag G H H J J K K T.K. Valves L L M M TRW-Mission N N P Sperry Vickers P Q Q R R Triangle S S T T V Severn V Thevignon


ManufacturerStd..= N A B C D E F G Naegelen H J K L M Newman N P Q R V Northvale

Manufacturer Std.= V A B C D E F G Vogt H J K L M N P Q R S Ives T


Manufacturer Std.= P A B C Pacific D E F G H J K L Powell M N P Q R

Manufacturer Std.= W A Worcester Series 44/45 B C Worchester D E F G H Wheatley J K L M N Winn P Q R S T

PDMS Catalogue

Valve Types

V A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Angle Globe Ball Ball Type Check Diaphragm Piston Check Butterfly Gate Globe Swing Check Tilting Disc Full Bore Diaphragm Flap Check Needle Plug Poppet Relief Short Ball Tank Dump Valve Angle Stop Check Straight Stop Check Wafer Check Y Type Globe

Three Way

Not Specified



PDMS Catalogue

Valve Actuators


Manual 90 Deg Turn Diaphragm Fail Open Diaphragm Fail Close Pneumatic Piston Electric Motor Actuator Gear Driven Handwheel Hydraulic Pressure Seal

Non Rising Stem Handwheel Piston Fail Open Piston Fail Closed Rising Stem Handwheel Soenoid

Not Specified



PDMS Catalogue

Orifice plate hole sizes


R

0.110 SQ INS 0.196 SQ INS 0.307 SQ INS 0.503 SQ INS 0.785 SQ INS 1.287 SQ INS 1.838 SQ INS 2.853 SQ INS 3.600 SQ INS 4.340 SQ INS 6.379 SQ INS 11.050 SQ INS 16.000 SQ INS 26.000 SQ INS

Not Specified



PDMS Catalogue

Saunders Valves

S A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

A

V

D

Manual Lever 90 Deg Turn Saunair ES60 Saunair ES61 Saunair ES62 Saunair ES63 Saunair ES64 Saunair ES65 Saunair ES66 Saunair ES67 Saunair ES68 Saunair ES69 Saunair ES70 Saunair ES71 Saunair ES72 Saunair ES73 Lever, Vertical Arc Non Rising Stem Handwheel Diaphragm Operated Spring Open Diaphragm Operated Spring Close

Not Specified



PDMS Catalogue

Worcester Valves

W A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

A

V

Wrench or Tee Bar Norbro 10-40 Norbro 20-40 Norbro 25-40 Norbro 30-40

Not Specified

Character table reference for Valves

V




PDMS Catalogue

Welds

0 A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

0

Z

Branch

Fillet (SW)

SQ Flange Fillet TEE

Not Specified

Character table reference for Welds

Z




PDMS Catalogue

Attas

0 A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

0

X

Pipe Support Atta

Not Specified

Character table reference for Attas

X

f


0 Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness (generally 0) Table D2 Pressure Rating = Table D1 Facing = Tabelle E1


PDMS Catalogue

Nozzle Standard

Z

Std.

American Std.= A A ANSI B16.5 B ANSI B2.1 C ANSI B36.10 D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

British Std.= B A B BS 1560 C BS 4504 D BS 3799 E BS 10 F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

DIN Std. = D A B DIN 2632 C DIN 2633 D E DIN 2635 F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0 Not Specified

Example : Nozzle Flanged to DIN 2633 = DCZ



PDMS Catalogue

Nozzle Type

Z A B C D E F G H J K L M N P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9 0

Boss Integral

Flanged Graylock Half Coupling

Threaded

Welded

Not Specified

Character table reference for Nozzles

Z

0 Nominal Bore 2 = Table N1 Nominal Bore 1 = Table N1 Wall Thickness (generally 0) Table D2 Pressure Rating = Table D1 Facing = Tabelle E1



PDMS Catalogue

Flange Facings Table E1


Flat Face Raised Face Large Tongue Large Groove Small Tongue Small Groove Large Male Smooth Large Male Serrated Large Female Radial Lock Small Female Small Male Projection V13 (DIN ) Recess R13 (DIN ) Ring Type Joint Soldered, Brazed

Victaulic

Compression Plain Buttweld (Bevel) Socket Weld Threaded Male & Female Threaded NPT Female Threaded NPT Male Threaded BSP Female Threaded BSP Male Not Specified



PDMS Catalogue

End connections for non flanged connections Table E2


Radial Lock

Soldered, Brazed

Victaulic BSP Para Male X SW BSP Taper Male X SW

Plain Bevel Socket Weld Threaded Male & Female Threaded NPT Female Threaded NPT Male Threaded BSP Female Threaded BSP Male



PDMS Catalogue

End connections for flange faces Table E3


Flat Face Raised Face Dow Radial Lock

Graylock

Integral gasket

Ring Type Joint Soldered, Brazed

Plain / Threaded Plain/SW Buttweld (Bevel) Socket Weld Threaded Male & Female Threaded NPT Female Threaded NPT Male Threaded BSP Female Threaded BSP Male Socket Weld / Threaded



PDMS Catalogue

Pressure ratings Table D1


PN 125# PN 150# PN 250# PN 300# PN 400# PN 600# PN 900# PN 1500# PN 2500# PN 5000# PN 2.5 PN 6 PN 10 PN 16 PN 25 PN 40 PN 63 PN 100 PN 160 PN 250 PN 320 PN 400 PN 75# PN 10000# PN 2000# PN 3000#

PN 6000#

PN 9000# Not Specified



PDMS Catalogue

Wall Thickness (Schedules) Table D2


ANSI SCH 5S SCH 10S SCH 10 SCH 20 SCH 30 SCH 40S SCH 40 SCH 60 SCH 80S SCH 80 SCH 100 SCH 120 SCH 140 SCH 160 STD XS XXS Light Medium Heavy

Class 2000# Class 3000#

Class 6000#

Not Specified



PDMS Catalogue

Nominal Sizes Table N1

Metric Bores

Imperial Bores


6 8 10 15 20 25 32 40 50 65 80 90 100 125

1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2.1/2" 3" 3.1/2" 4" 5"

150

6"

200

8"

250 300 350 400 450 500 550 600 650 700 750 800 850 900 Not Specified

10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"



PDMS Catalogue

pdms naming convention

Recommend Documents