Y R PAPER 3 T S MASTERY PRACTICES I M M P E S H C
Perfect Score SBP 2011
SPM Trial 2011
Prepared by: CHEOK BOON CHUAN
[1]
OXIDATION & REDUCTION Rusting of iron 1. [PS] Diagram 2 shows the set-up of apparatus to investigate the effect of other metals X, Y and Z on the rusting of iron. A mixture of jell y solution, potassium hexacyanoferrate(III) solution and phenolphthalein were used as medium in each test tube. The observations were recorded after one day. Test tube
Observation
Test tube A Iron nail coiled with metal X
Test tube B Iron nail coiled with metal Y
Test tube C Iron nail coiled with metal Z
Test tube C Iron nail Diagram 2
(a) State the inference for the observation in test tube A, B, C and D. [3 marks] (b) Based on this experiment, explain why there is a difference in the observation between test tube A and B. [3 marks] (c) State the hypothesis for the experiment. [3 marks] (d) Based on this experiment state: [3 marks] (i) The manipulated variable (ii) The responding variables (iii) The constant variables (e) State the operational definition for the rusting of iron nail. [3 marks] (f) Based on this experiment classify the metals that can provide sacrificial protection and metal cannot provide sacrificial protection to iron. [3 marks] (g) Observation in test tube D is recorded after two days. Compare the observation for the experiment after it left for one day and two days. Explain your answer. [3 marks]
After one day
After two days
[2]
2. [PERAK] Table 1.1 shows the observations in three t hree test tubes to investigate the effect of other metal on rusting of iron. A mixture of jell y solution and potassium hexacyanoferrate(III), K3Fe(CN)6 solution were used as medium in each test tube. The intensity of blue colour in the medium were recorded after one day. Test tube
Observation
Test tube A
Test tube B
Test tube C
Table 1.1
(h) Based on the observations in Table 1.1, write the inferences in Table 1.2. Test tube Inference
[3 marks]
A B C Table 1.2
(i) State the hypothesis for this experiment. (j) State the variables for this experiment. (i) The manipulated variable (ii) The responding variable (iii) The constant variable (k) If the experiment is repeated by coiling iron nail with silver. Predict the observation. (l) Test tube A and test tube B are left for 2 days. Compare the intensity of blue colour of the medium in test tube A and test tube B. (m) State the operational definition for the rusting of iron. (n) Based on this experiment, classify the metals into metals that prevent rusting and metals that speed up rusting.
[3]
[3 marks] [3 marks]
[3 marks] [3 marks] [3 marks] [3 marks]
3. [JOHOR] Table 2.1 shows the observations in three test tubes to investigate the effect of other metal on rusting. A mixture of jelly solution, potassium hexacyanoferrate(III), K3Fe(CN)6 solution and phenolphthalein were used as medium in each test tube. The observations were recorded after one week. Test tube
Observation
I
II
III
Table 2.1
(a) State one inference for each test tubes, I, II and III. (b) State the variables for this experiment. (i) The manipulated variable (ii) The responding variable (iii) The constant variable (c) State the hypothesis for this experiment. (d) State the operational definition for the rusting of iron. (e) Diagram 2 shows the apparatus set-up of an experiment.
[3 marks] [3 marks]
[3 marks] [3 marks]
Diagram 2.1
Predict an observation for the experiment after a week.
4. [TERENGGANU] (Effect of metal on rusting of iron)
[4]
[3 marks]
5. [PAHANG] Diagram 5(a) and Diagram 5(b) below shows the apparatus set up to study the effects of metals X and metal Y on the rusting of iron.
Diagram 5(a)
Diagram 5(b)
Referring the information in the diagram above, plan an experiment to investigate the effect of a named X and Y metals on the rusting of iron. Your planning must include all the following aspects: (a) Aim of the experiment (b) All the variables (c) Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data
6. [KELANTAN] The rusting of iron can be affected by the present of other metal that is contact with iron. Table 6 shows the results when metal P and metal Q are in contact with iron. Metal in contact with iron Metal P Metal Q
Results Iron does not rust Iron rust Table 6
Referring to the information above, plan a laboratory experiment to investigate the effect of named metals P and Q on the rusting of iron and arrange the position of metal P, Q and iron in electrochemical series. Your planning must include all the following aspects: (a) Aim of the experiment (b) All the variables (c) Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data
[5]
7. [S’WAK] Diagram 4 shows zinc blocks are placed on the hull of an iron to prevent rusting. However, some metals in contact with iron can speed up rusting.
Diagram 4
Based on this idea, plan a laboratory experiment to investigate the effect of different metals in contact with iron on the rusting of iron. You are provided with with potassium hexacyanoferrate(III) hexacyanoferrate(III) solution which turns t urns blue when iron(II) ions is formed and all other necessary materials and apparatus. Your planning must i nclude all the following items: (a) Statement of the problem (b) All the variables (c) Statement of the hypothesis (d) List of substances and apparatus (e) Procedure of the experiment (f) Tabulation of data
[6]
The reactivity series of metals towards oxygen 8. [KEDAH] Diagram 1.1 shows the apparatus set-up to determine the position of metals in i n the reactivity series. series. Solid potassium manganate(VII) is heated to produce oxygen gas to react with metal powder. The experiment is carried out using powdered metals of magnesium, aluminium, zinc and copper.
Diagram 1.1
Table 1.1 shows the observations of the experiment. Metal Magnesium Aluminium Zinc Copper
Observations Burns with bright flame and white powder. Burns with moderate flame and white powder. Glows brightly. Yellow powder when hot but white when cold. Table 1.1
(a) Write the observations for the reaction of copper powder with oxygen gas in Table 1.1. [3 marks] (b) Complete Table 1.2 for all the variables involved in this experiment. [6 marks] Variables Actions to be taken (i) Manipulated variable: (i) The method to control the manipulated variable (ii) Responding variable:
(ii) What to observe in the responding variables
(iii) Controlled variable:
(iii) Method to maintain the controlled variable Table 1.2
(c) (d) (e) (f)
State the hypothesis for the experiment. [3 marks] State the function of the glass wool. [3 marks] State the operational definition for the reactivity of metal powder with oxygen. [3 marks] Based on the observations in Table 1.1, arrange magnesium, aluminium, zinc and copper i n descending order of reactivity towards oxygen. [3 marks]
Reactivity of metal decreasing
[7]
THERMOCHEMISTRY 1. [PAHANG] An experiment is carried out apparatus to determine the heat of combustion of four alcohols, methanol (CH3OH), ethanol (C2H5OH), propanol (C3H7OH) and butanol (C4H9OH). The initial mass of spirit lamp 3 containing alcohol is measured before burning of the alcohol. Then, 200cm of water is heated with alcohol in the spirit lamp until the temperature of water rises by 30°C. The final mass of lamp containing alcohols is measured again after burning. Diagram 2 shows the set up of apparatus and thermometer reading of water for this experiment.
Diagram 2
(a) Give one inference based on the observation in Diagram 2. (b) For this experiment, state: (i) The manipulated variable (ii) The responding variable (iii) The constant variable (c) State one hypothesis for this experiment.
[3 marks] [3 marks]
[3 marks]
(d) Table 2 shows the initial and final readings of the electric balance of t he mass of spirit lamp before burning of four types of alcohol.
[8]
Table 2
Based on Table 2, state the mass of the alcohols used in space provided into two decimal places.
[3 marks] marks]
(e) Calculate the heat of combustion of methanol. -1 -1 -1 [Heat capacity of water = 4.2 J g °C , Molar mass of methanol = 32 g mol ] [3 marks] -1 -1 (f) Given the heat of combustion of ethanol and butanol are -1175 kJ mol and -2475 kJ mol respectively. By using the answer obtained in 2(e), plot a graph of heat of combustion against number of carbon atoms per molecule. [3 marks] (g) Using the plotted graph, predict the heat of combustion of propanol. [3 marks]
[9]
2. [MELAKA] Diagram 1.1 shows the set-up of apparatus t o determine the heat of combustion for alcohols.
Diagram 1.1
Three sets of experiments are carried out to determine the heat of combustion of different types of alcohols. Diagram 1.2 shows the initial and highest readings of the thermometer in the three sets of experiment. Set
Initial reading
Highest thermometer reading
I
II
`
[10]
III
Diagram 1.2
(a) Record the initial temperature readings and the highest thermometer readings in Set I, Set II and Set III at space provided in Diagram 1.2. [3 marks] (b) Construct a table to record the initial temperature of water, highest temperature of water and increase in temperature in Set I, Set II and Set III. [3 marks] -1 Alcohol Molecular formula Heat of combustion (kJ mol ) Methanol CH3OH -728 Ethanol C2H5OH -1376 Propanol C3H7OH -2016 Butanol C4H9OH Table 1
(c) State one hypothesis based on Table 1. [3 marks] (d) Predict the heat of combustion for butanol. [3 marks] (e) Sketch a graph to show heat of combustion of alcohols in Table 1 against the number of carbon atoms per molecule. [3 marks] (f) For this experiment, state: [3 marks] (i) The manipulated variable (ii) The responding variable (iii) The constant variable Diagram 1.3 shows the energy level for combustion of ethanol.
Diagram 1.3
(g) State three informations from Diagram 1.3. [3 marks] (h) Thermochemical equations below represent the combustion of propane and ethanol in excess oxygen. -1 C3H8 + 5 O2 → 3 CO2 + 4 H2O ∆H = -2202 kJ mol -1 C2H5OH + 3 O2 → 2 CO2 + 3 H2O ∆H = -1376 kJ mol Based on the themochemical equations above, state the operational definition for the heat of combustion. [3 marks] (i) Alcohol is one example of carbon compounds. Classify the following compounds into hydrocarbons and non-hydrocarbons. [3 marks] Pro ene
Butanol Butanol
Ethano Ethanoic ic acid
[11]
Meth Meth l ethano ethanoate ate
Diagram 1.4 shows set-up of apparatus for two sets of experiment. Set
Set-up of apparatus
I
II
Diagram 1.4
(j) Based on the information in Diagram 1.4, complete the following table. Set Observation 1. 1. I 2. 2. II
1.
1.
3. [TERENGGANU] (Heat of combustion)
4. [SBP] (Heat of combustion)
[12]
Inference
5. [PS] Different type of alcohols produces different heat of combustions. When the number of carbon per molecule of alcohol increases the heat of combustion increases. Table 6 shows the t he heat of combustion of ethanol, propanol and butanol. Alcohol Ethanol Propanol Butanol
Molecular formula C2H5OH C3H7OH C4H9OH
-1
Heat of combustion (kJ mol ) -1376 -2016 -2678
Table 6
Plan a laboratory experiment to compare the t he heat of combustion of the alcohols. Your planning must include the following aspects: (a) Statement of the problem (b) All the variables (c) Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data
Heat of neutralisation 6. [PERLIS]
Neutralisation is a reaction between an acid and an alkali to form f orm salt and water.
Referring to the situation above, plan a laboratory experiment to compare the heat of neutralisation neutralisation between a named strong acid with sodium hydroxide solution and heat of neutralisation between a named weak acid with sodium hydroxide solution. Your planning should include the following aspects: (a) Statement of problem (b) All the variables (c) Hypothesis Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data
Heat of displacement 7. [N9] (Heat of displacement)
[13]
ELECTROCHEMISTRY Electrolysis 1. [KEDAH] (g) Diagram 1.2 shows the apparatus set-up to construct the Electrochemical Series. The voltage produced when dipping the copper and magnesium electrodes int o the solution is measured. The experiment is repeated by replacing magnesium with aluminium al uminium and zinc.
Diagram 1.2
(i) Copper(II) sulphate solution is an electrolyte. Classify the ions that exist in copper(II) sulphate solution into cation and anion. [3 marks] Cation Anion (ii) Diagram 1.3 shows the readings of three voltmeters each using different metals paired with copper.
Diagram 1.3
Based on Diagram 1.3, record the voltmeter voltmeter readings in Table 1.3. Pairs of metals
Cu and Mg Cu and Zn Cu and Al
Negative terminal
[3 marks] Voltage / V
Magnesium Zinc Aluminium Table 1.3
(iii) Based on the voltmeter readings, arrange magnesium, aluminium, zinc and copper in ascending order of tendency to release electrons. [3 marks]
Tendency to increase electron increases
(iv) The experiment is repeated using the pair of metals : magnesium and zinc. Predict the voltmeter
reading.
[3 marks]
2. [SBP] (Effect of types of electrodes on the t he product formed)
[14]
3. [KELANTAN] A student is carried out three experiments to investigate the electrical conductivity of three compounds in their molten state. Diagram D iagram 3.1 shows the results obtained from the experiment.
Diagram 3.1
(a) (b) (c) (d) (e)
State one observation that can be obtained from each experiment. [3 marks] Based on your observations at (a), state the inference for these experiments. [3 marks] State the operational definition for the electrical conductivity. [3 marks] State one hypothesis for this experiment. [3 marks] State all the variables for this experiment: [3 marks] (i) The manipulated variable (ii) The responding variable (iii) The constant variable (f) Compounds can be classified into ionic compounds c ompounds and covalent compounds. Based on the compounds in Diagram 3.1, complete Table 3 by classifying the compounds into ionic or covalent compounds. [3 marks] Ionic compound Convalent compound Table 3
[15]
4. [PS] Diagram 4.1 and 4.2 show Experiment I and Experiment II to investigate the effect of type of electrodes on the products formed at the electrodes. Experiment I
Diagram 4.1
Experiment II
Diagram 4.2
Based on Diagram 2.1 and Diagram 2.2 above, plan a laboratory experiment to investigate the effect of the type of electrode to the product at anode. Your answer should consist of the following: (a) Aim of experiment (b) All the variables (c) Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data Voltaic Cells 5. [JOHOR] Diagram 2 shows some samples of battery. Battery is a voltaic cell that can be built using any two different metals and suitable electrolyte.
Diagram 2
Voltmeter reading of voltaic cell depends on the pair of metals used as electrodes. Plan a laboratory experiment to investigate investigate that different pairs of metals produce different voltage of a voltaic cell. Your planning should include the following aspects: (a) Problem statement (b) All the variables (c) Hypothesis Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data 6. [TERENGGANU] (Construct the Electrochemical Series based on the potential difference between two metals) [16]
CARBON COMPOUNDS Differentiate the solutions 1. [PERAK]
Diagram 1 shows the two reagent bottles containing two colourless liquid of carbon compounds P and Q respectively.
Diagram 1
These two liquids are hexene and ethanoic acid. Using suitable reagent, plan a laboratory experiment to identify the colourless liquids. Your planning should include the following aspects: (a) Statement of problem (b) All the variables (c) Hypothesis Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data
2. [N9] (Differentiate hexane and hexene)
Coagulation of latex 3. [MELAKA] There are many items around us such as tyres, mattress and gloves are made from rubber. Natural rubber is obtained from the latex secreted by rubber tree. Latex needs to be turned into a solid for it to be used in daily purposes.
An acid is used to coagulate the latex while an alkali can prevent the coagulation of latex. Based on this idea, plan one laboratory experiment to investigate the effect of acid and alkali on the coagulation of latex. Your planning
should include the following following aspects: (a) Statement of problem (b) All the variables (c) Hypothesis Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data
[17]
Preparing an ester 4. [PS] Diagram 3 shows the apparatus set up for the preparation of ester in the laboratory.
Diagram 3
Table 3 show some examples of the types of alcohol and carboxylic acid used to prepare ester. Alcohol Methanol Ethanol Propanol
Carboxylic Acid Ethanoic acid Propanoic acid Methanoic acid
Observation Sweet pleasant smell Sweet pleasant smell Sweet pleasant smell
Table 3
(a) State one inference for this experiment. [3 marks] (b) Construct a table to show the alcohols and carboxylic acid from table 2.1 and the esters formed. [3 marks] (c) Propyl butanoate is an ester that is formed from the reaction between an alcohol and carboxylic acid. Name the alcohol and carboxylic acid needed to prepare the ester. [3 marks] (d) Table 3.2 shows the observation for an experiment to differentiate between alkanes and alkenes. Experiment Added with bromine water Added with acidified potassium manganate (VII) solution
Hexane No change No change
[3 marks]
Hexene Brown bromine decolourised . Purple solution decolourised.
Table 3.2
(i) State the variables for this experiment: [3 marks] Manipulated variable Responding variable Fixed variable (ii) State one hypothesis for this experiment. [3 marks] (iii) Give the operational definition for alkene in this experiment. [3 marks] (iv) Hexene can also be differentiated from hexane with sootiness of flame when burnt. Predict which substance will produce more soot when burnt. Explain your answer. [3 marks]
[18]
Cleaning agent 5. Diagram 4 shows the set-up of apparatus used to investigate the cleansing action of a cleaning agent on a piece of cloth stained with oil. Experiment
Apparatus
Observation
I
Oil stained remains.
II
Oil stained remains.
Diagram 4
Based on the above diagram, plan one laboratory experiment to compare the e ffectiveness of cleaning agents A mad B on cleansing action in hard water. Your planning should include the following aspects: (a) Aim (b) All the variables (c) Statement of the hypothesis (d) List of substances and apparatus (e) Procedure of the experiment (f) Tabulation of data
[19]
ACIDS & BASES Neutralization 3
1. [PS] A student carried out an experiment to determine the end-point for the titration of 25.0 cm of 1.0 mol dm sodium hydroxide solution with hydrochloric acid. Phenolphthalein is used as t he acid-base indicator. Table 2 shows the three titrations that were conducted and the magnification of the burette readings. I
Titration No.
II
-3
III
Initial burette reading
Final burette reading
Table 2
(a) Record the burette readings for the three titrations in the spaces provided in Table 1. [3 marks] (b) Construct a table and record the initial burette reading, final burette reading and the volume of a cid used for each titration. [3 marks] [3 marks] (c) Calculate the molarity of the hydrochloric acid used in the experiment. (d) State the operational definition for the neutralization of sodium hydroxide solution in this experiment. [3 marks] (e) The experiment is repeated by replacing hydrochloric acid 1.0 mol dm-3 with sulphuric acid 1.0 mol dm-3. [3 marks] (i) Predict the volume of sulphuric acid needed to neutralise the sodium hydroxide solution.
(ii) Explain your answer for (e) (i). (f) Table 3 shows the results of an experiment to investigate the pH values of acids. Solution pH value -3 Hydrochloric acid, 1.0 mol dm 2.0 -3 Ethanoic acid, 1.0 mol dm 5.0 Table 3
For this experiment, state: (i) The manipulated variable (ii) The responding variable (iii) The fixed variable (g) State one hypothesis for this experiment. [3 marks] (h) Classify the following substances into substances with pH value less than 7 and pH value more than 7. [3 marks] Ethanoic acid
Barium hydroxide
[20]
Ammonia solution
Nitric
2. [JOHOR] Diagram 1 shows the apparatus set up for an experiment to determine the end point of titration in neutralisation reaction.
Diagram 1
(i) State two observations that you could obtain during the experiment.
[3 marks]
The experiment is repeated three times and the volume of hydrochloric acid used for each set is shown in Table 1. Set Initial reading Final reading
I
II
III
Table 1
(j) Record the burette readings in the spaces provided in Table 2. [21]
[3 marks]
(k) Construct a table to record the data from sets I, II and III. The table should include the initial reading, final reading, and the volume of hydrochloric used in the titration. [3 marks] (l) The chemical equation for the reaction is shown below: HCl + NaOH → NaCl + H2O 3 -3 Calculate the average volume of hydrochloric acid, HCl needed to neutralise 50cm of 1.0 mol dm sodium hydroxide, NaOH solution. [3 marks] (m) During the titration process, state the relationship between the concentration hydroxide ion, OH in sodium hydroxide, NaOH solution with time until the end point of titration. [3 marks] (n) Classify the following acids into monoprotic, diprotic and triprotic acid. Hydrochloric acid
Sulphuric acid
Monoprotic acid
Ethanoic acid
Diprotic acid
[3 marks] Nitric acid
Phosphoric acid
Triprotic acid
Concentration & pH value
3. [N9] (Concentration of hydroxide ions & the pH value)
Role of water in showing the properties of acids and bases 4. [KEDAH]
Glacial ethanoic acid, CH 3COOH is a dry acid. It only shows acidic properties when water is added to it.
Using the acid given, plan a laboratory experiment to investigate the role of water in showing the properties of acids. Use distilled water and dry propanone as solvents. Your planning should include the following following aspects: (a) Problem statement (b) All the variables (c) Hypothesis Hypothesis (d) List of materials and apparatus (e) Procedure (f) Tabulation of data
[22]
SALTS Solubility of salts 1. [PAHANG] Table 1 shows Experiment I, Experiment II and Experiment III which are conducted to study the solubility of salts in water. (a) Write the observation for Experiment I, II and III in Table 1. Experiment Reaction
[3 marks] Observation
I
II
III
(b) Based on Experiment I and III, state the operational definition of soluble salt. [3 marks] (c) When calcium nitrate solution is added into sodium carbonate solution, white precipitate calcium carbonate is formed. If potassium carbonate solution is used to replace sodium carbonate solution, the same salt is produced. Explain why? [3 marks] (d) Classify the following salts into soluble salts and insoluble salts. [3 marks] Potassium sulphate
Lead(II) sulphate
[23]
Barium sulphate
Zinc sulphate
Construct the ionic equation 2. [KELANTAN] An experiment was carried out to construct the ionic equation for the precipitation of silver chloride according the following steps: 3 -3 I. 5.00 cm of 1.0 mol dm potassium chloride solution was poured into 7 test tubes labelled P, Q, R, S, T, U and V. 3 -3 II. 1.00 cm of 1.0 mol dm silver nitrate solution was added to test tube P from burette. III. Step II was repeated for test tubes Q, R, S, T, U and V using different volumes of silver nitrate solution. IV. All the test tubes were put in the rack to allow silver chloride precipitate to settle. Height of precipitate formed is recorded in Table 2. Test tube 3 Volume of silver nitrate (cm ) 3 Height of precipitate (cm )
P 1.00 1.0
Q 2.00 2.0
R 3.00 3.0
S 4.00 4.0
T 5.00 5.0
U 6.00 5.0
V X 5.0
Table 2
(a) Diagram 2 shows the initial and final burette reading for test tube V.
Diagram 2
Based no Diagram 2, determine the value X in Table 2. X = final burette reading – initial burette reading 3 = _______ - _______ = _______ cm
[3 marks]
(b) Based on Table 2, plot a graph of height of precipitate against the volume of silver nitrate solution on the graph provided. [3 marks] (c) (i) On the graph, mark and write the minimum volume of silver nitrate solution needed for complete reaction 3 -3 with 5.00 cm of 1.0 mol dm potassium chloride solution. [3 marks] (ii) Using the volume obtained in (c)(i), calculate the number of moles of silver ions and chloride ions used. Then calculate the number of moles moles of chloride ions that will react with 1.0 mole of of silver ions. [3 marks] 3 3 (d) Predict the height of precipitate when 3.50cm silver nitrate solution is added into 5.00 cm potassium chloride solution. [3 marks]
3. [SBP] (Construct an ionic equation for the formation of barium chromate(VI).
[24]
MANUFACTURED SUBSTANCES IN INDUSTRY Hardness of a metal and its alloy 1. [PERLIS] Diagram 1.1 shows the apparatus set-up used in an experiment to compare the hardness of bronze with its pure metal, copper. The experiment was carried out according to the following steps: I. II. III. IV. V.
Cellophane tape was used to stick a steel ball bearing onto the copper block. A one-kilogram weight was hung at the height of 50 cm above the ball bearing as shown in Diagram 1.1. The weight was dropped so that it hits the ball bearing. The diameter of dent formed on the copper block was measured and the reading was recorded. Step I to Step IV were repeated by replacing the copper block with bronze block.
Diagram 1.1
Diameter = _________mm
Diameter = _________mm
Diagram 1.2
(a) Measure the diameter of dents and record the readings in the spaces provided. [3 marks] (b) Construct a table to record the diameter of dent formed on each copper block and bronze block. [3 marks] (c) (i) State one observation that can be obtained from this experiment. [3 marks] (ii) What is your inference based on your answer in (c)(i). [3 marks] (d) For this experiment, state: [3 marks] (i) The manipulated variable (ii) The responding variable (iii) The fixed variable (e) State the hypothesis for the experiment. [3 marks] (f) Based on Diagram 1.1 and Diagram 1.2, state the operational definition for the hardness hardness of alloy. [3 marks] marks] (g) The experiment is repeated by dropping one-kilogram weight at the height of 30cm. Predict the diameter of dent on copper block. [3 marks] (h) The following is a list of substances: Antimony
Bronze
Copper
Brass
Classify these substances into alloy and pure metal. (i) Steel takes a longer time to corrode compared to iron. Explain. [25]
Pewter
Tin
[3 marks] [3 marks]
2. [PS] Diagram 1.1 shows the set-up of apparatus for an experiment to compare the hardness of a metal and its alloy.
Diagram 1.1
A steel ball bearing is taped onto the material X block using cellophane tape. A weight of 1 kilogram is dropped at a height of 50 cm to hit the ball bearing. The diameter of the dent made on the material X block is measured. The experiment is repeated by replacing material X block with material Y block. Table 2.1 shows the view of the dents made on the material X and Y. Experiment
Material X
Material Y
Diameter: _________
Diameter: _________
Diameter: _________
Diameter: _________
Diameter: _________
Diameter: _________
I
II
III
Table 2.1
[26]
(a) (i) Using a ruler, measure the diameters of the dents made on material X and Y. Record all the diameters of the dents in Table 2.1. [3 marks] (ii) Construct a table to record the diameters of the dents and average diameter on material X and material Y. [3 marks] (b) State one observation that can be obtained from this experiment. [3 marks] (c) Based on the average diameter of the dents on material X and Y, state the inference that can be make. [3 marks] (d) State the operational definition for the hardness of alloy. [3 marks] (e) Explain why there is difference in diameter of dents on material X and Y. [3 marks] (f) Suggest a suitable material for X and Y. [3 marks] (g) State the hypothesis for this experiment. [3 marks] (h) Complete Table 2.2 based on the experiment. [3 marks] Variables Actions to be taken (i) Manipulated variable: (i) The method to control the manipulated variable (ii) Responding variable:
(ii) What to observe in the responding variables
(iii) Controlled variable:
(iii) Method to maintain the controlled variable Table 2.2
[27]
PERIODIC TABLE OF ELEMENTS Reactivity of Group 17 elements 1. [S’WAK] Diagram 3 shows the set-up of the apparatus for Experiments I, II and III to investigate the reactivity of chlorine gas, bromine vapour and iodine vapour with heated iron wool respectively. Set-up of the apparatus
Observation
Experiment I
Experiment II
Experiment III
Diagram 3
(a) Record the observations for the reactions of chlorine gas, bromine vapour and iodine vapour with heated iron wool in the spaces provided in Diagram 3. [3 marks] (b) Name the solid formed when chlorine reacts with heated iron wool. Write a balanced chemical equation for the reaction. [3 marks] (c) State the operational definition for reactivity of the halogens. [3 marks] (d) Arrange the halogens in ascending order of reactivity. [3 marks] (e) Halogens have different solubilities in water. Classify chlorine, bromine and iodine acc ording to the bleaching ability of the solutions they produced in water. [3 marks] With bleaching agent Without bleaching agent
[28]
RATE OF REACTION 1. [S’WAK] A student carried out an experiment to investigate the effect of the size of a solid reactant on the rate of reaction. The procedure is as follows: 1. 25.0 cm3 of 0.5 mol dm-3 hydrochloric acid is added to a conical flask. 2. 2.0 g of large marble chips is added. 3. The flask is placed on an electronic balance. 4. The mass of the flask and its contents is recorded at half-minute intervals until a few constant readings are obtained. 5. Steps 1 to 4 are repeated using 2.0 g of small marble chips. Diagram 1.1 shows the readings of the electronic balance for the mass of the flask and its contents using large marble chips at 0.0 minute, 0.5 minute, 1.0 minute and 1.5 minutes respectively.
Diagram 1.1
Diagram 1.2 shows the readings of the electronic balance for the mass of the flask and its contents using small marble chips at 0.0 minute, 0.5 minute, 1.0 minute and 1.5 minutes respectively.
Diagram 1.2
(a) Record the readings of the electronic balance to two decimal places in Table 1. Total mass of flask and contents (g) Time (minute) Large marble chips Small marble chips 0.0 0.5 1.0 1.5 2.0 62.28 62.22 2.5 62.22 62.20 3.0 62.20 62.20 3.5 62.20 62.20 4.0 62.20 62.20
[3 marks]
Table 1
(b) State the variables for this experiment. [3 marks] (i) The manipulated variable (ii) The responding variable (iii) The constant variable (c) State the hypothesis for this experiment. [3 marks] (d) Draw a graph of the readings of the total mass of the flask with its contents against time, for the esperiments using large marble chips and small marble chips respectively, on the same axes. [3 marks] (e) Based on the graph plotted in (d), calculate the overall average rate of reaction for both experiments. [3 marks] 3 -3 (f) Predict the overall average rate of reaction if the experiment is repeated by using 25.0 cm of 0.5 mol dm sulphuric acid and 2.0 g of small marble chips. Explain your answer. [3 marks] [29]
CHEMICAL FORMULA & EQUATIONS Empirical formula 1. [PERAK] A student has carried out an experiment to determine the empirical formula of oxide of copper according to the following steps shown in Diagram 1. Steps
Set-up of apparatus
Combustion tube + porcelain dish are weighed Reading (a)
Combustion tube + porcelain dish + oxide of copper are weighed Reading (b)
Combustion tube + porcelain dish + copper are weighed after cooled. Reading (c) Diagram 1
(a) Record the reading to two decimal places for: Reading (a): __________ (b): __________ (c): __________ (b) Construct a table to record the readings in the experiment. (c) (i) Calculate the mass of copper: __________ oxygen: __________ (ii) Determine Determine the empirical formula of oxide of copper. State an observation in this experiment.
[30]
[3 marks] [3 marks] [3 marks] [3 marks]
